Controls technician jobs in Lochearn, MD - 324 jobs

We are currently offering a $1,500 sign-on bonus for EPG Mechanic Technician Advisor new hires, payable after 90 days of employment. Carter Machinery Company, the authorized Caterpillar dealer serving Virginia, West Virginia, Maryland, Delaware and Washington D.C. is hiring a Electric Power Generation (EPG) Mechanic Technician Advisor in Elkridge, Maryland. The EPG Mechanic Technician Advisor is responsible for providing technical assistance to other technicians in a positive and efficient manner, while promoting the highest level of quality, safety, customer satisfaction and teamwork. The EPG Mechanic Technician Advisor plays an active role in the upfit process and works closely with other technicians for the purpose of diagnosing and repairing complete electric power generation systems. Detailed completion of all assignments including test results and other required reports is essential. Seeking candidates with a minimum of three years' experience with Power Generation equipment and operation; High school diploma or GED required. Requirements for the EPG Mechanic Technician Advisor position include: Must have good troubleshooting skills. Must be able to occasionally operate heavy machinery. Excellent customer relations skills. Must be a strong communicator with excellent verbal and communication skills. Must be able to lead and motivate employees. Must be able to establish and maintain effective working relationships and manage time effectively. Self-starter able to work with limited supervision. Must be able to perform under stress and/or in emergencies. Strong mechanical aptitude and expert level troubleshooting skills; able to accurately diagnose and repair equipment. Proficient in the use of a computer, Microsoft Office products and service software required in position; able to complete service reports and provide pertinent details for work orders. Strong written and verbal communication skills; able to write service reports that accurately document diagnosis and repairs performed. Must prepare required documentation including work orders, parts lists, and time cards in an accurate and timely manner. Must be able to work shifts as needed, including days, nights, and/or weekends to meet customer needs. Promote a positive customer experience. Uphold the Core Values of Integrity, Commitment, Excellence and Teamwork by embracing The Carter Way. Physical requirements must be met for the EPG Mechanic Technician Advisor job, including regularly being required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to sit. The employee must regularly lift and /or move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision and ability to adjust focus. This job description is not intended to be all-inclusive. Additional duties may be assigned. Starting Compensation Range: $36.86 - $45.54 per hour Actual base pay may vary based on factors such as experience, skills, qualifications, education, geographic location, and other business needs. In addition to base pay, total compensation may include participation in performance-based incentive programs, such as discretionary or non-discretionary plans. Competitive Compensation and Benefits: Health, dental and vision insurance. Paid time off. 401(k), $0.75 to $1.25 match up to 6%. Life and disability insurance. In-house training instructors/programs. Tuition reimbursement. Employee referral bonus program. Discounts: cellular phone service, computers, tooling, cars and trucks. Opportunities for overtime Shift differential (if applicable) Carter Machinery Co. Inc. is an EEO/AA Employer. All qualified individuals - including minorities, females, veterans, and individuals with disabilities, or any other characteristic protected by law - are encouraged to apply. Carter Machinery is a drug-free workplace. *Special rules and restrictions may apply to sign-on bonus eligibility for rehires. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor. Qualifications Behaviors Thought Provoking: Capable of making others think deeply on a subject Team Player: Works well as a member of a group Leader: Inspires teammates to follow them Innovative: Consistently introduces new ideas and demonstrates original thinking Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Dedicated: Devoted to a task or purpose with loyalty or integrity Motivations Self-Starter: Inspired to perform without outside help Goal Completion: Inspired to perform well by the completion of tasks Ability to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organization

Senior Hiring Specialist - Civil Engineering & Architecture We're looking for a Senior Consultant to join our Workforce Strategy team in Washington, DC. In this role, you'll partner with executives across engineering and architecture firms to help them attract, hire, and retain top talent. You'll oversee and execute high-level strategic searches, advise clients on employee engagement and development practices, and build lasting relationships with career professionals across the AEC industry. This role is ideal for someone who loves connecting people with purpose, understands the nuances of talent in a technical industry, and wants to make a tangible impact on how firms grow and lead their teams. Why DesignForce? At DesignForce, we're a hardworking, passionate, and collaborative team united by one mission - to elevate the employee experience in the AEC industry. As a proud Certified B Corporation, we're guided by principles of social responsibility, ethics, and impact. We balance purpose and fun, with a culture that celebrates connection and creativity through happy hours, team bonding events ( sip-and-paint nights, bowling, paintball, escape rooms, axe throwing and more), and biweekly catered lunches. Our biweekly internal trainings reflect our deep commitment to innovation and continuous learning, we're always looking for ways to elevate our people and our work. We bring high energy and fresh ideas to everything we do, working in a flexible hybrid environment out of our vibrant, modern office in Dupont Circle. Core Responsibilities Include: Develop and foster long-term relationships with professionals in the design and building industries, assisting them with their career development. Provide personalized career coaching sessions for professionals within the Architecture, Interiors, Engineering, Development and Construction fields. Assist with the development and execution of workforce strategy initiatives, including 360-performance reviews, strategic planning, benefits benchmarking, compensation analysis, and employee engagement surveys. Partner strategically with organizational leaders and hiring managers to proactively assess talent needs, providing expert guidance to shape workforce planning and ensure alignment with both immediate and long-term business objectives. Source talent and continue to build and enhance an active National network through various channels like LinkedIn, social media, and industry networking events. Aid in the development and facilitation of high impact learning and development workshops. Research and write industry-specific blog articles to promote DesignForce and personal brand. Preferred Qualifications Include: Hold a BA or BS in Communications, Human Resources, Psychology, Architecture, Interior Design, Civil Engineering, or a related field. 4+ professional years of experience, with a strong preference of 2+ years being focused in talent acquisition, recruiting, human resources, career coaching, design, engineering consulting, or a related field. Display exemplary communication capabilities, effectively communicating verbally and through writing. Demonstrate strong ownership of your workload by proactively managing client and internal team relationships, independently establishing realistic deadlines, and consistently delivering results that meet or exceed the highest standards of excellence. Be able to pivot quickly and adapt to change in a fast-paced, high-energy environment. Love food. Seriously. We like to eat. (Specific knowledge about the DC food scene is a plus but not a requirement). Additional Information - We Take Care of Our People by Providing the Following Benefits: Generous Paid Time Off (PTO) & Paid Holidays Paid Voting & Wellness Leave Annual Professional Development Budget Paid Parental Leave On-Site Gym Membership Comprehensive Medical, Dental, and Vision Coverage 401(k) with Matching Quarterly Team Volunteering Outings Professional Development Support Bi-Weekly Catered Team Lunch Equal Opportunity Employer At DesignForce, we don't just accept difference - we celebrate, support, and thrive because of it. DesignForce is a proud equal-opportunity employer. Employment at DesignForce is based solely on a person's merit and qualifications directly related to professional competence. DesignForce does not discriminate against any employee or applicant because of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy, or related condition (including breastfeeding), or any other basis protected by law.

Are you looking to catapult your career by driving high-impact transformation with household brands? Do you crave an entrepreneurial, fast paced, and engaging growth assignment working with incredible people from across the globe? At Dreyer's Grand Ice Cream, we are excited to start a new chapter of accelerated growth as part of Froneri - a global pure-play ice cream leader. Come help us transform DGIC into the #1 ice cream brand! With nearly 100 years of winning experience in the U.S, a robust portfolio of powerhouse brands that consumers know and love such as Häagen-Dazs, Drumstick, Dreyer's & Edy's, Skinny Cow and Outshine, and the backing and coaching of European-based ice cream experts, we know we have the winning recipe. Headquartered in Walnut Creek, the Bay Area's hub for up-and-coming food trends, our teams across our offices and factories are raising the bar on all things ice cream. We are investing in significant capital expansions to grow our Operations and Supply Chain and are transforming how we work at every level to become agile, accelerate growth and elevate our quality. With a renewed focus on frozen treats, our tight-knit team of ambitious innovators are fully immersed in the business and encouraged to flex and make decisions quickly. We are committed to pursuing every great idea and delivering the best ice cream experience for our consumers, when and where they want it. Unleash your potential at Dreyer's Grand Ice Cream and discover what a sweet career we have in store for you. Main Purpose of the job: The primary function of this position is to provide technical support for all data systems, software, hardware and communication equipment, troubleshoot, perform installations, disassembly, repair, re-assembly and preventative maintenance of electrical systems on a wide variety of production equipment and processes in emergency and non- emergency situations, observing all safety regulations and ensuring all GMP and quality standards are met and to maintain the efficient flow of product through the production process. Role and Activity Put on all required PPE and Safety Gear, perform a safety check on equipment and insure safety devices are functioning properly. Obtain work schedule and daily production, risk predictions, from scheduler, prioritize work and prepare for operations Complete Shift Hand Off- (Show), communicate with prior and/or relieving operator to discuss any line issues, Ensure that all E-Stops, Machine and People Guards and like devices have be tested and are operational according to Laurel Operations Center (LOC), Safety, Health and Environment (SHE) minimum requirements and log information in appropriate database. Receive and prioritize requisitions for repairs, hardware, materials and supplies, verify orders and check inventory. Plan proper operational repair work sequences and minimize production delay and perform preventative maintenance tasks on electrical and production equipment. Provide security software, technical support for all data systems as well as, software, hardware and communication equipment. Troubleshoot and maintain all electrical control systems, install and maintain all types of electrical equipment, layout and complete installations, modifications, repairs and updates of electrical systems and process instrumentation systems. Replace, repair and maintain lighting and emergency lighting systems, install conduits and electrical boxes, transformers, motors, bearings, circuit boards, sensors, pull wires and ties to relocated machinery, connect power and perform electrical checks. Test parts, assemblies, equipment and systems for proper operation, make necessary adjustments and record all modifications. Check specifications according to blueprints and schematics for all new equipment installations. Assist Maintenance Mechanics with the repair, maintenance, rebuilding and installation of equipment and machinery in the facility. Inspect work area, perform clean-up using proper tools and equipment and according to approved methods and procedures. Assist all Trades with repairs, replacements, adjustments, modifications to devices, systems, controls, equipment and machinery. Complete other related duties as assigned or directed by the Supervisor. At end of shift, secure all equipment, complete all required paperwork, perform general housekeeping and clean-up as required. Basic knowledge of PLCs, HMIs, VFDs, Servo Drives and Servo motors, Rockwell is required. Performs PLCs, HMIs, VFDs, Servo drives repair. Ability to read PLC logic and use it as a troubleshooting tool. Ability to work and troubleshoot issues inside electrical cabinet with voltage up to 600Vac using tools such as Multimeter and Megohmmeter Ability to read blueprints and schematics for equipment Represent The Froneri Way of working through the behaviors and characteristics in our Operating Model and Core Values Measurable Outcomes Preventive Maintenance: Develop and implement a comprehensive preventive maintenance schedule for all automation equipment and systems. Troubleshooting: Quickly diagnose and resolve electrical and automation-related issues to minimize production interruptions. Automation System Upgrades: Collaborate with the engineering team to identify and implement automation system upgrades and improvements. Training and Knowledge Transfer: Provide training to operators and maintenance personnel on equipment operation and basic troubleshooting to reduce downtime. BEHAVIORS AND CORE VALUES: Must consistently showcase the desired behaviors that represent our Core Values. We Take Ownership Stay committed to responsibilities from start to finish Make sound decisions and get into the right level of detail Apply resources to initiatives that add growth, improve efficiencies, or reduce waste We Do What Is Right Choose transparency over convenience, even if it means difficult conversations Set clear roles and responsibilities, enabling everyone to exercise appropriate initiative and judgment Speak up when you see something that does not align to our values and policies We Seek to Improve Strive to continuously improve and innovate to exceed expectations Value feedback from others and encourage open dialogue to understand how we can improve Learn from both successes and failures We Are Better Together Ensure decisions are based on what's best for the whole business Practice inclusion by seeking diverse perspectives Treat everyone with fairness and respect Work Environment  In this position, the employee will regularly work with and around others; in a wet and/or humid environment; in areas of high noise level; and around mechanical, electrical, and pressurized equipment. The work is fast paced. Cold Temperatures: Parts of the facility, such as storage and production areas, may be kept at low temperatures. Requires use of cold-protective PPE. May involve standing, lifting, and walking in refrigerated zones for extended periods. Fast-Paced: Workers often operate under strict timelines to meet production quotas. High-speed manufacturing floor with frequent movement, line assignment changes, and tight production timelines. Standing for Long Hours: Many roles require prolonged standing and repetitive tasks. Repetitive hand and arm movements required. Must be able to stand for hours with frequent bending, reaching, and lifting. Food Safety Regulations: Employees must follow hygiene and safety guidelines, including wearing protective gear (gloves, hairnets, etc.). Team-Oriented: Workers collaborate to ensure smooth production and packaging. The position involves frequent exposure to nuts and other potential allergens.  The pay scale for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Dreyer's Grand Ice Cream, it is not typical for an individual to be hired at or near the top of the range for their role, and compensation decisions are dependent on the facts and circumstances of each case. The pay range for prospective employees in this role is between $41.06 - $49.27 per hour, with opportunities for overtime, shift differential, cold premium pay and annual bonuses (variable depending on company performance). Dreyer's Grand Ice Cream Inc. provides equal employment opportunities for all applicants, regardless of race, religion, gender, national origin, age, disability, marital status, veteran status, or any other protected characteristic.

Responsible for the operation and maintenance of direct digital control (DDC) and building automation systems (BAS) equipment. Troubleshoots and repairs, on site and remotely, DDC and BAS systems. MINIMUM QUALIFICATIONS Education, Training, and Experience: Possession of a high school diploma or an appropriate equivalent. Four years of experience in the operation and maintenance of HVAC equipment with building automation and/or direct digital control systems. Experience in at least one of the following:Siemens, Johnson, Honeywell, Tridium, and/or Pritchard. Multiple systems experience is preferred. Licenses and Certifications: Possession of a valid class C Maryland driver's license or an equivalent is required. Possession of a Baltimore County Electrician's License Restricted (Low Voltage) or an equivalent preferred. Required licensure must be maintained throughout employment within this classification. Knowledge, Skills, and Abilities: Knowledge of heating, ventilation, and air conditioning (HVAC) systems. Knowledge of direct digital control (DDC) and building automation systems (BAS). Working knowledge of personal computers, software, and work order systems. Skill in the operation, repair, programming, and maintenance of HVAC, BAS, and/or DDC systems. Skill in the operation of personal computers and software. Ability to learn Baltimore County Public School system safety, procedural and policy guidelines, and applicable government regulations. Ability to lead, oversees, and coordinates the operation and maintenance of direct digital control (DDC) and building automation systems. Ability to train others to operate, program, and repair HVAC equipment with building automation systems and direct digital control systems. Ability to communicate effectively. PHYSICAL AND ENVIRONMENTAL CONDITIONS: The work of this class entails heavy physical labor including frequent walking, standing, kneeling, reaching, bending, digging, lifting, and carrying objects of moderate to heavy weight, ascending/descending ladders, scaffolds, stairs and the use of tools and equipment. Works in confined spaces in proximity to loud machinery, frequently requires accessing and positioning oneself to reach limited access spaces including but not limited to crawl spaces, roofs, trenches, pits, manholes, attics, and tunnels. Recognizes exposure to live circuits and/or operating machinery in adverse weather conditions and travel to sites throughout Baltimore County. Salary: Pay rates range from $27.81 - $41.96 per hour. Grade: 10/American Federation of State, County and Municipal Employees (AFSCME) pay scale. Visit the BCPS Office of Payroll website for additional information on pay scales, other compensation and leave accruals at ************** of Payroll - Baltimore County Public Schools. Other Compensation: This position may also be eligible for comp time as per the AFSCME Master Agreement and Memorandum of Understanding. Visit the BCPS website for additional information at **************************************** Id=2828&page Id=69996497 FLSA Status: Non-Exempt Retirement and Benefits Eligibility Retirement: Eligible for the Baltimore County Employees' Retirement System. Benefits: BCPS offers a comprehensive benefits program for eligible employees including options for medical plans, dental plans, vision, life insurance, flexible spending accounts, disability coverage, and 403(b)/457 plans. Other benefits include paid holidays, sick, personal business, and bereavement days, and flexible leave options such as FMLA, sick bank, and board approved leaves. All new hires will attend a benefits meeting upon hire. Visit the BCPS website for additional information about benefit plans for BCPS employees at ********************************************************** This document describes the duties and responsibilities of a position. It shall not be held to exclude duties not referenced nor limit the right of management to assign work to employees. Application Instructions: Please read and carefully follow the instructions provided below. Applicants are required to have a completed application on file for employment with Baltimore County Public Schools (BCPS). Information on your resume and application must match. This information is necessary for salary determination should you receive an offer of employment. Professional references must be submitted to complete your application. Examples of professional references include current and former principals, supervisors, managers, mentor teachers and university/college supervisors. Personal references from colleagues, friends, community members, etc. will not be accepted. Be sure to account for all periods of employment and unemployment. Failure to complete all fields of the "Work Experience" section of the application may result in your application not being considered. A resume will not be the only document considered in determining your qualifications for a position. You MUST attach your unofficial transcript(s) or license(s) to your application if you applying for a position as a teacher or position which requires Licensure/Certification. Pre-Employment Requirements: All people employed by the Baltimore County Public Schools, regular and temporary, are required to be fingerprinted and have a criminal background investigation (per COMAR) completed. The fee charged for fingerprinting is $109. Anyone offered employment is required to provide proper identification and documentation of eligibility for employment in the US. If you have military experience, you will be asked to provide a copy of DD214. Official transcripts will be required upon hire and must be sent via escript/clearinghouse from your university. Some positions will require employees to undergo a physical examination and/or drug testing. All newly hired personnel must attend a Benefits and Retirement Orientation meeting. Additional job verification will be required for salary credit. Contact Information Shawn Stahl, HR Manager Email: *********************** Phone: ************ EXAMPLES OF DUTIES: Oversees and performs the operation and maintenance of various direct digital control (DDC) and building automation systems (BAS). Provides advice, guidance, assistance, and training to Building Automation Systems Technicians and others. Troubleshoots and repairs, on site and remotely, DDC and BAS systems including hardware and software. Performs programming using various software packages to maintain and improve system operation. Responds to service calls from schools and those generated by BAS and DDC systems. Restores the operation of heating ventilation and air conditioning (HVAC) systems. Identifies energy savings opportunities that can be achieved through repairs or changes of sequence in the building automation system software. Assists in commissioning new systems and coordinates checkout and warranty calls by installation contractors. Identifies system deficiencies in new BAS and DDC installations. Coordinates with other trades including plumbing and electrical to resolve repair issues. Coordinates with the environmental group to make HVAC-related repairs that may contribute to indoor air quality problems. Initiates service calls. Escalates service calls as required when the operation of HVAC systems cannot be restored in a timely manner. Coordinates the efforts of building automation technicians and building automation systems operators. Assist the senior operations supervisor in coordinating the scheduling of HVAC equipment controlled by BAS systems both at schools and remotely through operator workstations. Records and maintains accurate records of work performed, time and materials used. Uses budgeted funds to order parts and request service from BAS and DDC systems service companies as needed. Maintains supplies, materials and equipment inventory for maintenance of BAS and DDC systems. Assists the field representative or senior operations supervisor with coordinating the production of service reports and the purchase of materials. Communicates appropriately and frequently with faculty, school administrators, supervisor/manager(s) and other employees. Performs other duties as assigned.

Responsibilities (including but not limited to): Installation and maintenance of electronic equipment Custom Installation and setup of various hardware in finished and unfinished residential/ commercial (interior and exterior) Install, configure, and test various surveillance hardware, smart-home gadgets, cabling etc Able to take direction and use cognitive thinking in order to complete complex installations solo or as a team Must be good at solving and complex installation configurations on the fly Pull and terminate cables Rough-in and finish work Minimum Requirements: Must have clean driving record Prior construction experience - knowing your way around a construction site/ home etc Prior experience running and terminating RJ45, Coax and RJ-11 Prior Experience installing AV industry products (tvs, racks, in-wall/ceiling items) Ability to follow instruction Excellent communication skills; strong customer service skills Must be able to lift 50 pounds; must be able to bend, stoop, reach, climb. Bonus Points for below: Computer Networking and WiFi experience Control4, Crestron, Total Control/ URC experience Camera NVR programming/ setup experience DSC Security products experience Additional info: Work vehicle provided Paid Cell phone Paid Individual Health Insurance Paid Vacation and 401k offered Growth opportunities are available Are you looking for rewarding work, Working in high end luxury residential, looking for a position with room to grow? Well then send us your resume! Strategic Home Media is a boutique Audio Visual - Security - All Around Home Automation Integrator that has been in business for over 18 years. We've got an opening in our roster and we're looking to add a low voltage technician with some experience in the low voltage - AV field to our team! Someone who is hardworking, honest and a go-getter will do well with us. Our home office is located in Kent Island Maryland but work all over the state of Maryland, Northern Virginia and in Washington DC. The right person will have in-depth knowledge and practical ability to run wire in new/existing construction - be able to mount televisions to the wall using a variety of mounts. Be able to use power tools and measure with accuracy. Other plus's are: Ability to work alone or as a team, being humble and ensuring one's work is sound. Being neat, clean and courteous. We install a lot of gear from simple to complex systems, multi building estate to single room setups and mostly in upscale luxury residential. If you think you're a good fit please email your resume. Thanks! Compensation: $48,000.00 - $71,000.00 per year Smart Home Integration offers a tremendous growth opportunity for a variety of skill sets including sales, technician, project management, operations and more. According to CEDIA, the global trade association for the home technology industry, the most recent 2021 Integrated Home Market Analysis reports the estimated value of the integrated home market at $20.1B. Categories experiencing the most growth include lighting, motorized shades, lighting control, and networking. Smart Home Integrators offer careers in sales, operations, marketing, project management, finance, merchandising, purchasing, technical trades, and customer service. If you're seeking to make an impact from the start of your career, spark impressive change, learn new or innovative skills, and most importantly, gain success in a field that rewards ambitious hard workers, a Smart Home Integration opportunity is for you! Benefits of working in Smart Home Integration Opportunity for Growth If you want a responsible and engaging position in a fun environment, why not choose the Smart Home Integration sector. With the proper training and career road map, you can write your own ticket! Gain In-Demand Skills As consumers focus on improving and connecting their lives at home, growth in the smart home sector is booming.

Job DescriptionDescription: The Building Automation Technician is responsible for executing field installation verification, point-to-point checkout, controller programming deployment, and on-site coordination of subcontracting crews for commercial building automation projects. This role serves as the primary field technical lead, ensuring systems are installed, programmed, and tested in accordance with project specifications, schedules, and quality standards. The technician provides regular progress updates to the assigned Project Manager and supports system readiness for commissioning and turnover. Technical Execution: • Perform point-to-point checkout of building automation systems, including sensors, actuators, controllers, and network devices. • Verify installed field devices against approved submittals, drawings, and sequences of operation. • Download, deploy, and validate controller and supervisory-level programs. • Troubleshoot hardware, wiring, communication, and programming issues to resolution. • Support system startup, functional testing, and commissioning activities. Field Leadership & Subcontractor Coordination: • Direct and oversee subcontracting crews on site. • Coordinate daily work activities to ensure adherence to project scope, safety requirements, and schedule. • Confirm work quality and completeness prior to inspection or checkout. • Identify installation deficiencies and coordinate corrective actions. Project Coordination & Reporting: • Provide regular progress updates to the Project Manager. • Document checkout status, deficiencies, and resolutions using company-standard reporting tools. • Assist with schedule planning by identifying constraints, material needs, or manpower impacts. • Participate in coordination meetings with internal teams and subcontractors. Documentation & Closeout Support: • Complete checkout reports, testing documentation, and as-built markups. • Support preparation of commissioning and turnover documentation. • Assist with training support and punch-list resolution as needed. Requirements: Required Qualifications: • 3+ years of experience in Building Automation / Controls field execution. • Strong working knowledge of BAS hardware, field devices, and control networks. • Experience performing point-to-point checkout and system startup. • Ability to lead subcontractor field crews effectively. • Ability to read and interpret drawings, submittals, and specifications. • Strong troubleshooting and communication skills. Preferred Qualifications: • Experience with major BAS platforms. • Commissioning or functional performance testing experience. • OSHA 10 or OSHA 30 certification. • Experience on large commercial construction projects. Physical & Work Requirements: • Ability to work on active construction sites. • Ability to climb ladders and lift up to 50 lbs. • Willingness to travel to job sites as required. Key Performance Indicators (KPIs): • Accuracy and completeness of point-to-point checkout. • Adherence to project schedule milestones. • Quality of documentation and reporting. • Reduction of punch-list and rework items. • Effective coordination of subcontracting crews.

Who YOU are and what YOU can become: We're seeking detail-oriented and proactive Automation tech. In this role, you will support robotic and automated solutions used for aerospace manufacturing processes. This role offers a great opportunity to support the latest AFP, assembly and machining equipment while playing a crucial role in assuring OEE and on time delivery. Who WE are and where WE are going: At ST Engineering MRAS, our employees have amazing opportunities to work on advanced technologies and systems that support thousands of customers and millions of people worldwide every day. From the first flight across the Pacific Ocean to developing highly complex structures for the most popular aircraft in the world, we have come a long way always with a can-do approach to problem solving while delighting customers with our high say-do ratio. We are looking for people with innovative ideas and the drive to help us grow into the future. A pioneer in the production and assembly of complex aerostructures including aircraft and rocket components, engine nacelle systems, thrust reversers and advanced composite products, we apply the latest digital technologies and automation in composite design and manufacturing that are second to none. At ST Engineering MRAS, we are also rapidly augmenting our maintenance, repair and overhaul (MRO) capabilities leveraging the company's expanded aircraft nacelle portfolio as well as it's materials and processing expertise. What YOU will do: * Perform disassembly, cleaning and exchange of perishable components. Interface between operations, Automation Engineering and skilled trades. Documenting trends and allowing the operators to focus on quality and process completion. * Assist with the tracking equipment and component trends. This data and feedback will be used to establish component service life, useful life, durability, and longevity. This feedback will be provided to the automation and equipment engineers allowing TPM initiatives to progress quickly. * Work in a team environment supporting the Operators, Maintenance, Engineering, and area leadership team by providing clear communication on equipment status. * Ability to follow a pre-determined cleaning and replacement schedule for perishable parts. * Provide a level of Mechanical aptitude that assures the critical components are dis-assembled and re-assembled consistent with OEM requirements. * Provide feedback concerning automation equipment issues that allows Mechanical and Electrical Controls (MEC) and Machine Repair (MR) teams to correct electrical and mechanical issues that are above routine preventive maintenance. * Hands on experience with maintenance and troubleshooting of robotic assembly systems, or experience that will allow employee to be trained to support cleaning and replacement of perishable components. * Basic understanding of PLC's, vision systems. Electronic sensors, pneumatics, hydraulics, Numerical Control Machines, and robotic production equipment is desirable but not required. What YOU must bring to Succeed: Candidate must have a H.S. Diploma and (2) year of Hands-on experience with Maintaining, cleaning, and assembly of mechanical, pneumatic, and Electrical controlled components for Automation or Numerical Control equipment. Understanding of assembly tolerance stack-ups. Work schedule will be discussed during application process. Desired Characteristics * Experience with troubleshooting AFP process issues. * Highly values team success and communication. * 3+ years' experience in a support role for preventive maintenance of equipment used in Aerospace Assembly and or Composites Manufacturing. * Desire to learn and pursue training opportunities that strengthen CNC capabilities and increase critical trouble shooting skills. At ST Engineering MRAS, we offer great rewards, competitive pay, career advancement and growth opportunities. Estimate salary range for this role: $25.14 - $36.53 per hour. ST Engineering considers several factors with extending job offers, including but not limited to candidates' key skills, relevant work experience, education/training/certification, job level, and work location. Base salary is only one component of our competitive Total Rewards package. ST Engineering - MRAS Benefits: As a full-time employee of ST Engineering- MRAS, you are eligible for our benefits package including: * Medical, Dental, and Vision coverage starting from start date * Health Flexible Spending Accounts * Free Onsite Gym with weekly fitness classes * Immediate 401k vesting * Educational Assistance * Life Insurance * Paid Time off (Permissive for exempt staff) Employment Notice: Background and Drug Screening Requirements As part of our commitment to maintaining a safe and secure workplace, successful completion of a background check and drug screening is a mandatory condition for employment. All offers of employment are contingent upon satisfactory results from these screenings. It takes diverse talent to solve real-world problems. ST Engineering is deeply committed to building a workplace community where inclusion is valued, and everyone feels welcomed. We're proud to consider all qualified applicants for employment without regard to race, color, religion, sex, pregnancy, family status, marital status, sexual orientation, national origin, disability, age, or veteran status, or any other legally protected grounds. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at ************, or by email at ***********************. Nearest Major Market: Baltimore Apply now "

General maintenance, installation, and repair of control equipment throughout the facility. All necessary repairs, adjustments, and modifications to electronic systems within the facility. **Essential Duties and Responsibilities** + Must be able to read blueprints, electrical and electronic wiring diagrams and troubleshoot installed systems. + Use various electronic testing equipment in the troubleshooting of equipment malfunctions., or verbal instructions. + Utilize computers in monitoring and repairing installed systems and is able to remotely adjust system parameters. + Maintain the general cleanliness and appearance of assigned spaces and assists the maintenance team, as required, according to personal qualifications. + Must be fully knowledgeable of the required actions in the event of the loss of any of the regularly supplied utilities services. + Serves as the initial point of contact for the Facilities Department for all the building occupants to report maintenance requirements and inputs these requests into the facility's computerized maintenance management system (CMMS). + Assigns urgent and emergency work to the appropriate trade worker(s) and distributes routine work orders to the supervisors or individual trade lead. + Assists staff technicians in monitoring and analyzing the proper operation of the HVAC system (heating, cooling and airflow into all rooms of the hospital). + Reports on abnormal building system conditions to the appropriate supervisor or trade lead. + Makes all necessary changes to work orders in the CMMS and closes work orders upon completion. + Monitors all centrally monitored alarm systems that track power availability, temperature controls, and pressure requirements. Takes the appropriate action necessary when abnormal or alarm conditions occur. + Takes direction from Lead Control Technician. + Other duties as assigned. **Knowledge, Experience and Skill Requirements** + Excellent oral and written communication skills. + Knowledge of computer software programs to include Word, Excel. + Power Point and Outlook required. + Experience with a Facility Computerized Maintenance Management System software (CMMS) highly desired. + High School Graduate, technical or trade school certificate in related field desired. **Work Environment** + Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions. + Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. _This job description is subject to change by the employer as the needs of the employer and requirements of the job change._ CBRE Government & Defense is thrilled at the opportunity for you to apply to one of our roles. The rate for this position is $54.77. This position may also be eligible for a wide range of benefits based on applicable bargaining unit agreements. This description is not intended to be an "all inclusive" list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. **We maintain a drug-free workplace and perform pre-employment substance abuse testing.** THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE'S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Job DescriptionDescription: Capitol Boiler Works, LLC. is a well-established mechanical contracting company offering true 24/7/365 service in all mechanical crafts. CBW serves the DC Metro area and parts of West Virginia and Delaware, with offices in Springfield, VA, Richmond, VA, Hebron MD, and Baltimore, MD. Our primary focus is commercial and industrial customers in the region, with a specialty in property management companies. Capitol Boiler Works, LLC. is a privately held company serving the region since 1936. CBW is currently seeking the right individual to fill a full-time opening for Combustion and Controls Technician. We offer a competitive benefits package including: Medical Dental Vision Life & Disability Supplemental Ins. 401k Flexible Spending Account (FSA) Health Savings Account (HSA) ESSENTIAL DUTIES AND RESPONSIBILITIES may include any/all of the following: Align structures or plate sections to assemble boiler frame tanks or vats, following blueprints. Inspect and repair boiler fittings, such as safety valves, regulators, automatic-control mechanisms, water columns, and auxiliary machines. Reads dials of temperature, pressure, and ampere gauges and meters to detect malfunctions and ensure specified operation of equipment. Tests electrical system to determine voltage, using voltage meter. Records temperature, pressure, water levels, fuel consumption, and other data at specified intervals in logbook. Observes pressure, temperature, and draft meters on panel to verify specified operation of automatic combustion control systems, feed water regulators, stoker, pulverizer, and burners. Turns valves and adjusts controls to set specified fuel feed, draft openings, water level, and steam pressure of boiler. Observes boiler and auxiliary units to detect malfunctions and makes repairs, such as changing burners and tightening pipes and fittings. May test boiler feed water, using specified chemicals. May maintain log of meter and gauge readings and record data, such as water test results and quantity of fuel consumed. Operates automatically fired boilers to generate steam that supplies heat or power for buildings or industrial processes: Lights gas- or oil-fed burners, using torch. May be designated according to fuel burned, type of boilers, or class of license required. Troubleshoots malfunctions in electrical circuits as necessary. Inspects wiring, checks connections and power sources, and logs repair needs. Understand basic one pipe, and two pipe steam systems and hydronic systems. Installs and maintains motors, wiring, and all electrical equipment including control work for lighting, motors, and instrumentation. Follows all safety rules and procedures and operates electrical equipment in accordance with established safety regulations and department policies. Assist in taking on supplies and equipment. Apprentices shall perform all duties listed above under the guidance of a journeyman mechanic combined with on-the-job training and any additional schooling as required. Requirements: EDUCATION AND EXPERIENCE High school education/G.E.D. with schooling in trade industry. At least 5 years of experience in the burner/boiler industry (licensing preferred). Apply common sense understanding to carry out detailed but uninvolved written or oral instructions and deal with problems involving vessel maintenance. LANGUAGE SKILLS Ability to read and comprehend instructions, short correspondence, and memos. Ability to effectively present information in a one-on-one setting to members of management and fellow employees. Ability to write legibly for form completion. QUALIFICATION STANDARDS Ability to perform essential job functions consistent safely and successfully with ADA, FMLA, and other federal, state, and local standards/requirements. Ability to meet and maintain all qualitative and/or quantitative productivity standards. Ability to maintain reasonably regular and punctual attendance consistent with ADA, FMLA and other federal, state, and local standards/requirements. Compliance with all personnel policies and practices. Ability to comprehend and carry out safety sensitive duties according to company policies, procedures, and safe work practices.

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Amentum is seeking an Electrical Control Technician for multiple OCONUS locations contingent upon award. The Electrical Control Technician is responsible for maintaining, repairing, and troubleshooting electrical control systems within a facility. This role ensures that all systems operate efficiently and safely, contributing to the overall operation of building management systems. The position requires collaboration with other technicians and departments to support seamless operations and address any technical challenges that arise. Essential Responsibilities * Perform regular maintenance on pneumatic and electronic controls to ensure optimal performance. * Troubleshoot and repair any issues with AC/DC electronic systems, solid-state electronics, and DDC controls. * Operate and maintain Honeywell, Powers, and Carrier Building Management Systems or similar systems. * Collaborate with other technicians and departments to resolve complex technical issues. * Document all maintenance and repair activities thoroughly and accurately. * Ensure all work complies with safety standards and regulations. * Be available for rotational shift work, including days, evenings, nights, weekends, and holidays, as required. Minimum Position Knowledge, Skills, and Abilities Required * High school diploma or GED equivalent, with technical or trade school graduation or equivalent apprenticeship in mechanical trades. * Thorough working knowledge of AC/DC electronic theory, solid-state electronics, DDC controls, and computer operations. * Familiarity with Honeywell, Powers, and Carrier Building Management Systems or similar systems. * At least five years of experience in maintenance and repair of pneumatic and electronic controls. * Ability to work effectively in both independent and team settings. * Strong problem-solving skills and attention to detail. * Willingness to work varied shifts, including overtime, weekends, and holidays as necessary. * Must possess a SECRET security clearance at the start of the contract and be able to obtain the appropriate clearance within eight months. Work Environment, Physical Demands, and Mental Demands * The position involves working in a variety of environments, which may include exposure to noise, dust, and varying temperatures. * Physical demands include standing, walking, bending, and lifting equipment or tools up to 50 pounds. * Mental demands include the ability to remain focused and attentive to detail while managing multiple tasks and troubleshooting complex issues. * The technician must be able to adapt to changing priorities and work under pressure to meet deadlines. * Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Job Description Automated Enforcement Technician (Full-Time) Monday to Friday 8:00am to 4:30pm The Revenue Authority of Prince George's County is seeking an Automated Enforcement Technician to perform a wide variety of administrative functions including support services to the Prince George's County Automated Enforcement Program, general office, record management and correspondence with the public by phone and letters pertaining to violations. The incumbent will have considerable degree of independent judgment and action in accordance with departmental policies, rules, and regulations. The Revenue Authority of Prince George is a quasi-governmental entity that serves as a real estate development and development finance agency, an operator of programs and facilities, and a manager of programs and facilities in partnership with other Prince George's County agencies. Responsibilities include but are not limited to: Assists management with day-to-day operations of Prince George's County Automated Enforcement Programs as well as special projects within the Automated Enforcement Program. Reviews and subsequently approves or rejects Automated Enforcement Program camera violations, generated by Red-Light cameras, Speed cameras, and School bus cameras. Appears in court to represent the program if citations are contested. Responds to telephone inquiries/complaints concerning citations issued by the Automated Enforcement Programs. Answers incoming calls and correspondence regarding complaints, payments. Proactively reviews account history and provides motorist with detailed information. Assists with searching files and other sources as necessary, compiles information for meetings, specific projects or research activities, and statistical reports Performs other tasks and duties which may not be specifically listed in the position description, but which are within the general occupational category and responsibilities Qualifications/Skills Required: Required High school diploma or G.E.D. certificate. Two (2) + years of clerical/administrative experience in a customer service environment Must be able to lift up to 15 pounds. Knowledge of Microsoft Office suite (including MS Word, Excel, and PowerPoint). Ability to establish and maintain effective working relationships with employees, Board Members, county officials, District Court, State Attorney, Motor Vehicle Administration, vendors and the public. Why Should You Join Our Team As a dynamic agency, we understand what it means to have a work culture that is dedicated and flexible to create a work/life balance. The Revenue Authority of Prince George's County is an equal opportunity employer committed to promoting an inclusive work environment free of discrimination and harassment. We are committed to our mission and values, while promoting a sense of belonging and growth with our coworkers. Together, we continue to build a culture that encourages, supports, and celebrates the diverse voices of our employees. We are proud to offer a comprehensive benefits package including: Medical, Dental, vision, EAP services, and more! Vacation, Sick and Personal Leave 401K Retirement Savings Plan Telework/Hybrid Work for Qualified Positions Opportunities for Professional Development Friendly Team-oriented Work Environment If you are interested in this position, we encourage you to apply! Conditions of Employment Must successfully complete background check Eligibility to Work Under the Immigration Reform and Control Act of 1986, an employer is required to hire only U.S. citizens and lawfully authorized alien workers. Selected candidates for employment will be required to show and verify authorization to work in the United States. Closing Date Open until filled. Pay $ 23.00/hour Non-Exempt Eligible for Overtime

Job Description Automation Control Technician The Automation Control Technician will identify opportunities where automated systems will reduce labor, improve quality, and improve ergonomics and/or safety. Job Responsibilities: Works with internal and external parties to organize the various components needed to initiate and launch projects and automation initiatives. Duties include coordinating schedules and activities, placing orders for equipment and services, and tracking progress and results. Interfaces with the Management Team to anticipate manufacturing requirements and methods. Researches, evaluates, and recommends production methods, resources, and equipment for new processes. Applies strong proven practical experience with PLCs, servomotors, robotics and sensors to improve automated production processes and reduce human interaction. Performs hands on electrical, mechanical and automation troubleshooting, making adjustments to processes and/or machinery. Optimizes equipment/manufacturing processes to provide sustainable gains in product quality, process yield and efficiency. Troubleshooting Electrical, PLC and other industrial automation in a manufacturing environment. Design, install, Program and commission small size Automation control systems. Additional Duties: Documents time and materials by project for R&D history. Makes recommendations regarding automation equipment and fixtures to support manufacturing. Applies various preventive action tools such as error-proofing/poka-yoke, and analyzes their effectiveness as a means to improve product quality and manufacturability. Train and support Maintenance team members on an ongoing basis on the understanding of Automation and troubleshooting. Monitors and reacts in a timely manner to routine demand and maintenance requirements. Benefits: Health / Dental / Vision / Life Insurance options 401k Employee Stock Ownership Plan Flexible Spending Account 9 Paid Holidays PTO = up to 96 hours the first year Wellness Plans

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Install and modify software and graphics. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $26/Hour-$32.50/Hour (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description Security Clearance: Interim-Secret Required to Start Job Type: Full-Time Target Salary Range*: $100,000 - $130,000. *This represents the potential salary range for this position depending on education level, years of experience and/or certifications in addition to other position specific requirements which may impact salary Position Overview: Amatriot is looking for a Metrologist to join the team at the Naval Surface Warfare Center, Carderock Decision's (NSWCCDs) Fabrication Team. In this role, you will utilize high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and perform computerized spatial analysis. Calibrate equipment then measure item geometry and spatial relationships. This includes small and large-scale items requiring dimension and tolerance analysis to determine accuracy. Shall restrain items to prevent hog and sag deformation prior to measurement. Provide Tolerance Measurement Study upon completion. Perform preventative and routine maintenance and calibration of measurement equipment as needed and issue calibration Key Responsibilities: Prepare measurement reports per customer specifications. Determine if first article parts are acceptable. Implement new innovative practices to promote part accuracy, and proficiency. This may include, but is not limited to, new reporting templates or formats that better facilitate the documentation, reporting, and tracking of precision measurement activities. Use Polyworks Metrology Software to inspect high tolerance finished components designed with minimal fixturing to preform article inspection. Use Polyworks to advise shop management, supervisors, and planners, during the planning and costing phase, on the difficulty, complexity and potential issues which may arise during the inspection process. Analyze and diagnose problems which may arise during the inspection process. Utilize Polyworks or Spatial Analyzer to determine root cause of potential issues and develop methods and processes to ensure that similar issues are reduce or eliminate in future tasks. Use Polyworks software to perform Laser Tracker measurements according to the Model Fabrication Facility policies and standard practices Adhere to the Model Fabrication Facility policies and standard practices were applicable. Design specialized tooling fixtures to be used to support the production of complex machined components Applies knowledge of engineering disciplines in structural design, weld design materials applications and prototype design · Skilled in the interpretation of complex engineered drawings, sketches and verbal communications Qualifications: High School diploma or equivalent. Experience with utilizing high precision measurement equipment (coordinate measurement machines (CMMs), laser tracker equipment, ultrasonic devices, calipers, verniers, electronic protractors, squares, height gauges, depth gauges, indicators, and micrometers) and performing computerized spatial analysis Knowledge of manufacturing trades including industrial and commercial manufacturing processes to contribute to the engineering design and development function Ability to collect and analyze data in test samples and fabrication mockups and apply the data collected to the fabrication of future high cost components and models Experienced in inspecting and dimensionally verifying components and models to ensure compliance with dimension specified in drawings, specifications and control documents. Experience with generating and delivering measurement reports per customer specifications Thorough understanding of geometric dimensioning and tolerance practices, including NIST. Ability to read and work from highly detailed drawings and specifications. Desire to learn, ask questions, and take initiative within safety and skills limitations. Preferred Qualifications: Possess a working knowledge of machining and sheet metal processes. Familiarity with NAVSEA, Navy, or other military standards for fabrication Experience with PolyWorks and Spatial Analyzer

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Amentum is seeking an Electrical Control Technician for multiple OCONUS locations contingent upon award. The Electrical Control Technician is responsible for maintaining, repairing, and troubleshooting electrical control systems within a facility. This role ensures that all systems operate efficiently and safely, contributing to the overall operation of building management systems. The position requires collaboration with other technicians and departments to support seamless operations and address any technical challenges that arise. **Essential Responsibilities** + Perform regular maintenance on pneumatic and electronic controls to ensure optimal performance. + Troubleshoot and repair any issues with AC/DC electronic systems, solid-state electronics, and DDC controls. + Operate and maintain Honeywell, Powers, and Carrier Building Management Systems or similar systems. + Collaborate with other technicians and departments to resolve complex technical issues. + Document all maintenance and repair activities thoroughly and accurately. + Ensure all work complies with safety standards and regulations. + Be available for rotational shift work, including days, evenings, nights, weekends, and holidays, as required. **Minimum Position Knowledge, Skills, and Abilities Required** + High school diploma or GED equivalent, with technical or trade school graduation or equivalent apprenticeship in mechanical trades. + Thorough working knowledge of AC/DC electronic theory, solid-state electronics, DDC controls, and computer operations. + Familiarity with Honeywell, Powers, and Carrier Building Management Systems or similar systems. + At least five years of experience in maintenance and repair of pneumatic and electronic controls. + Ability to work effectively in both independent and team settings. + Strong problem-solving skills and attention to detail. + Willingness to work varied shifts, including overtime, weekends, and holidays as necessary. + Must possess a SECRET security clearance at the start of the contract and be able to obtain the appropriate clearance within eight months. **Work Environment, Physical Demands, and Mental Demands** + The position involves working in a variety of environments, which may include exposure to noise, dust, and varying temperatures. + Physical demands include standing, walking, bending, and lifting equipment or tools up to 50 pounds. + Mental demands include the ability to remain focused and attentive to detail while managing multiple tasks and troubleshooting complex issues. + The technician must be able to adapt to changing priorities and work under pressure to meet deadlines. + Other Responsibilities: **Safety** - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. **Quality** - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. **Procedure Compliance** - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .