Controls technician jobs in Robinson, PA - 134 jobs

Kopp Glass, a Pittsburgh-based manufacturer of high-performance, custom glass products, is seeking to hire a Robotics Technician/Engineer responsible for developing, implementing, and managing process parameters and resources for automated, robotic glass manufacturing technologies. This person takes a hands-on approach to equipment operation, adhering to key aspects of the Quality Management System (QMS) related to process improvement, product documentation, corrective action, and preventative action procedures while leading daily work order execution to fulfill customer orders. The role will support and perform critical preparatory and operational processes including activities associated with glass melting, forming, and analysis, blending the technical aspects with hands-on responsibilities. This is a fully onsite position that will be responsible for performing job functions in Rostraver Township (15012). Primary Responsibilities: * Coordinates, executes, and optimizes the operation of production work cells including tooling, robotics, and forming, through implementation of engineering best practices in preparation to and during production. Leads and performs setup of equipment, operation of robotic and automated equipment, and evaluation of results from glass manufacturing work cells. * Works with the engineering team to accomplish the daily work plan, which could involve equipment maintenance, programming, repairs in a variety of robotic areas, inventory, equipment cleaning, forklift use, manufacturing, and other tasks as assigned. * Analyzes and resolves product related issues and sets up methods of prevention for future occurrences (root cause analysis and corrective action) through application of rigorous mechanical, glass science and engineering principles when executing the NCR/Corrective Action processes. * Develops part and process specific documentation for the integration of products into new or existing manufacturing processes while supporting the industrialization of small-scale processes into commercially viable large-scale operations. Minimum Qualifications: * Associate's degree in robotics, electrical, mechanical engineering and/or engineering technology or related field. Bachelor's degree preferred. * Up to 5 years of manufacturing or robotics experience; Various positions available dependent on experience. * Proficient Microsoft Office skills including, Word, Excel, and PowerPoint. * Proficient verbal and written communication skills. Access to our facility (and therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) to U.S. Citizens and permanent residents of the United States. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes.

Mechatronics Technician Trainee - $1,500 Sign-On Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: Bonus payments every 6 months Rich health plans Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you're mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. Position Summary The Mechatronics Technician Trainee is an entry-level production position where successful candidates will participate in the Core Mechatronics Career Development Program. This (fully paid) on-the-job training program will align your skills with a career path customized to your strengths and interests. Participants will work within the Core Mechatronics Production department. For highly motivated individuals with a strong desire to learn, this is an excellent opportunity to launch or transition into a hands-on technical career. What will your day look like? At Aerotech, you will Participate in a structured training program intended to provide the skills necessary to become an expert in the precision manufacturing industry under the guidance of experienced training and leadership staff. Integrate theory with practical hands-on skills through written training material and direct coaching from leadership. Read wiring and assembly drawings to determine product requirements Master industry required skills such as precision measurement, alignments, and advanced troubleshooting. Assemble and test complex, high precision mechanical and electrical components using a variety of testing, measurement equipment and software Assemble/Wire/Test precision motion systems. Operate additive manufacturing (3D printing) equipment in the production of Aerotech parts. Attend and actively contribute to bi-weekly progress meetings to engage in feedback exchange with training personnel. Successful completion of the training program will qualify you to pursue more advanced roles throughout the organization. What will separate you from the rest? Experience with Strong mechanical and/or electrical aptitude Strong drive to continually advance your career Experience with hand tools such as wrenches, hex keys, torque wrenches, screwdrivers, flat stones and pliers Ability to read and interpret assembly drawings and schematics Effective computer literacy and use of software, such as an ERP system Troubleshooting and problem solving skills Participation in a technical education program preferred, but not required Minimum Qualifications Must have a High School Diploma or GED Benefits: Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! Competitive compensation Bi-annual bonus Annual raise eligibility UPMC Health Insurance Dental insurance Vision insurance Life insurance Retirement Plan Employee Stock Ownership Trust 401k Paid time off Parental leave Monday to Friday standard schedule Optional overtime - including Saturdays Referral program Professional development assistance Tuition reimbursement Must be authorized to work in the US currently and in the future without employer sponsorship. As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company.

At Skild AI, we are building the world's first general purpose robotic intelligence that is robust and adapts to unseen scenarios without failing. We believe massive scale through data-driven machine learning is the key to unlocking these capabilities for the widespread deployment of robots within society. Our team consists of individuals with varying levels of experience and backgrounds, from new graduates to domain experts. Relevant industry experience is important, but ultimately less so than your demonstrated abilities and attitude. We are looking for passionate individuals who are eager to explore uncharted waters and contribute to our innovative projects. Position Overview We are seeking a Robotics Technician to help sustain and improve Skild's internal robot operations. In this role, you will take ownership of complex diagnostics, repairs, and design improvements to keep our robotic systems running smoothly. You will work closely with AI and robotics engineers, as well as operations managers, to ensure technical issues are quickly identified, root-caused, and resolved-driving reliability and scalability across our fleet. Responsibilities Diagnose, troubleshoot, and repair complex mechanical, electrical, software, and perception system issues across a large fleet of robots. Collaborate with engineers to identify recurring issues, recommend design improvements, and enhance serviceability. Communicate technical findings clearly and contribute to documentation, repair manuals, and troubleshooting guides. Perform CAD design, prototype fabrication, and robotic hardware assembly. Improve embedded control systems and implement electromechanical and perception systems. Conduct root cause analysis, debugging, and testing for sensors, edge compute devices, and control systems. Build dashboards (Looker, Tableau) and develop automation scripts in Python and Linux. Maintain detailed records of repairs, maintenance activities, and recurring technical issues. Preferred Qualifications 5+ years of full time work experience in relevant industry Strong experience in diagnosing and repairing mechanical, electrical, and software systems. Proficiency in CAD design and prototype fabrication. Familiarity with embedded control systems, perception technologies, and electromechanical components. Excellent communication skills for cross-functional collaboration. Experience supporting large fleets of robots or complex automated systems.

Job Description Looking for a place where your turning skills matter? Picture this: You step into a friendly, small-shop environment in New Kensington, PA. A seasoned machinist walks you through a new setup, sharing tips on offsets for a Nakamura 2-4 axis lathe. Later, you move to a Citizen or Tsugami Swiss lathe, apply a G-Code adjustment, and solve a minor tooling hiccup-backed by teammates who want you to succeed. That's life at Quality Machined Products and Manufacturing Inc. (QMP). Your growth path Whether you're early in your career or have years on the floor, if you have experience operating CNC lathes, we'd love to hear from you. Expect one-on-one mentoring, steady work from repeat customers, and the satisfaction of seeing the direct impact of your craftsmanship. What's in it for you Competitive pay Benefits Company stability Small company feel Supportive co-workers Learning opportunities Impact of what you make How you'll contribute Operate multi-axis turning centers (Nakamura, 2-4 axis) Run Swiss lathes (Citizen, Tsugami) Leverage G-Code to keep quality and throughput on track Diagnose issues and support equipment repair Assist with CNC machine installation and continuous improvement Our story QMP has been delivering custom machining and precision manufacturing since 1946. Under President Walter Stammer Jr., our team blends a strong work ethic with advanced technology to achieve complete customer satisfaction. Our pledge All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. Don't miss your chance to join a stable team that invests in your growth. Apply now.

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Controls Technician - Pittsburgh, PA - Building Systems Company Sr. or Jr. Field Controls Technician (Project-Side; Construction-Side) ABOUT COMPANY: Building Systems Technology Company (primarily Building Automation but also offer Lighting and Fire Detection services) Clientele: Class A Commercial Building, Healthcare, K-12 Schools, Universities, Laboratories, etc. Operates in 2 States / Metro-Markets Reps multiple BAS Controls product-lines with one being an Open-IP for Tridium Niagara integration Company does A LOT of Tridium Integration RESPONSIBILITIES: Mentor up-and-coming Controls Technicians and assist with their growth Primarily in the field, traveling to various sites in the Pittsburgh Metro Point-to Point-Check-Out / Commissioning Ability to create a program from a library/canned program/template Communication Integration: BACnet, LON, Modbus, etc. Troubleshooting Controls installation Rewriting Sequences Working with some graphics

Robotics Technician Industry:Manufacturing Employment Type:Full-Time, Onsite Compensation:$55,000$69,000 annually Schedule:7:00 AM4:00 PM or 6:00 AM3:00 PM A growing manufacturing operation in Rostraver Township County, PA is seeking a skilled Robotics Technicianto join its engineering team. This position plays a key role in supporting day-to-day production, maintaining robotics systems, and ensuring smooth and efficient manufacturing operations. The ideal candidate brings hands-on experience in robotics or manufacturing environments and is eager to contribute in a dynamic, fast-paced setting. Key Responsibilities Set up, operate, and fine-tune production work cells and robotic systems Collaborate closely with the engineering team to complete daily work plans Perform equipment maintenance, repairs, light programming, inventory checks, and general upkeep Troubleshoot process or product issues, identify root causes, implement corrective actions, and establish preventive measures Create and update documentation related to parts, processes, and new product introduction Assist in scaling small processes into larger-volume production environments Required Qualifications Associate or bachelors degree in Robotics, Electrical Engineering, Mechanical Engineering, or a related technical field Previous experience in manufacturing or robotics Proficiency with equipment and tools common in manufacturing environments Software and Tools CMM machine Microsoft Office Excel Benefits Health, Vision & Dental Insurances -- Company covers 75 percent 401K 15 days PTO, 5 sick days 10 paid holidays This is an excellent opportunity for a robotics-focused professional seeking meaningful hands-on work, consistent collaboration with engineering teams, and long-term stability within a respected manufacturing environment. Qualified candidates are encouraged to apply.

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online. Under direct supervision during shift work, performs skilled routine and multitask, both in the laboratory, shops and field in both normal and radiological areas of the plants, related to installation, calibration, maintenance, troubleshooting and testing of equipment associated with electrical, mechanical and instrumentation & control systems. Satisfactorily completes the scheduled Instrument & Control Technician Apprentice-Shift Training Program. Job Description * Perform scheduled maintenance, calibrations, troubleshooting and repair and assist in the major maintenance and calibration of instrumentation and controls, reactor protection and associated equipment. * As directed, performs maintenance on microprocessor, electronic, hydraulic and pneumatic instrumentation and control systems. * Verifies and complies with Equipment Clearances and Radiological Work Permits associated with Instrument and Control maintenance work assignments. * As directed, maintains proper operation of control systems by diagnosis and correction of operating perturbations through maintenance and calibration. * Satisfactorily completes the scheduled initial, continuous, on-the-job and refresher training commitments identified in the I&C Technician Apprentice-Shift Training Program as accredited by the National Academy for Nuclear Training and multitask training. * Maintains calibration and maintenance work areas for portable equipment associated with radiation monitoring. * Maintains the I&C shops, job work sites, test equipment issue areas and lab equipment in a safe, orderly, and neat condition. * Assists other groups in support of safe operations and maintenance of the nuclear site. * Accurately completes all documentation associated with and required by assigned job tasks. * Complies with all regulatory and site procedures and policies, including Site Emergency Plan and Technical Specifications. * Assists in performing maintenance, calibrations, and troubleshooting on systems and equipment within the reactor containment and other radiological areas during all modes of plant operation. * As directed, performs "pre-critical checkout" of reactor controls and instrumentation. * As directed, sets up test equipment and assists the engineers in conducting tests of station equipment. * Assists in performing maintenance and calibration of areas, process and portable radiation monitoring systems and equipment. * Assists in performing the necessary rigging in handling of I&C related equipment and materials. * As directed, assists computer personnel by performing board component level repair, I/O module hardware calibration, soldering, wire wrapping and cable lug terminations. As directed, performs maintenance on reactor control rod drive and control equipment. * Assists in modifying control panels, both electrically and mechanically, for new or different installation of instruments and controls. * Performs multitask and other work related to the above assigned or directed. * Two year Post-High School relevant education or equivalent experience as deemed appropriate by Maintenance Management, in applicable field. * Pass the Instrument and Control Technician Apprentice qualification test and EEI Standardize test. * Satisfactorily completes, as scheduled, the initial, continuous, on-the-job, Training and qualifications and to proceed in line of progression to first class technician as identified in the I&C Training Program as accredited by the National Academy for Nuclear Training. * Demonstrated work knowledge of electronic equipment and circuitry, and some knowledge of magnetic amplifier equipment. * Demonstrated reasonable familiarity with the basic theories of mechanical instrumentation and control and their methods of application in nuclear power stations; and familiarity with physical/dimensional measurement techniques and methodologies. * Demonstrated ability to "troubleshoot" instrumentation and control circuits. * Demonstrated ability to interpret simple sketches, prints, and written instructions and to work from such recorded instructions. * Demonstrated knowledge of and ability to apply, company safety regulations, policies, and practices. * Must be capable of passing and maintaining the applicable discipline eye examination standards. * Demonstrated reasonable familiarity of electrical and mechanical physical/dimensional measurements. * Demonstrated reasonable familiarity of digital electronics and microprocessor based technology. * Must be physically able and willing to utilize protective clothing, respirators, or other equipment essential to the requirements of maintaining a Nuclear Power Plant including making containment entries. * Must be able to and willing to work in elevated or confined quarters and in radiation fields. * Must have the physical ability to carry a minimum of 50 pounds tooling, test equipment, and plant equipment Job Family Plant Operations Company Vistra Nuclear Operations Company Locations Shippingport, Pennsylvania Pennsylvania We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today! If you currently work for Vistra or its subsidiaries, please apply via the internal career site. It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws. If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.

The candidate shall have a minimum of 1-2 years of related experience and possess the following: * Experience with electrical components and some basic understanding of reading drawings such as single lines, schematics, layouts, cable and conduit schedules, and cable interconnects. * Building and wiring various electrical panels. * Compiling parts lists per panels. * Picking up parts at local vendors. * Shipping and receiving duties. * Must have strong communications skills. * Ability to multi task. * Ability to work independently and in a team setting. * Willing to travel (approximately 5%) for onsite job discussions, inspections, field measuring, and troubleshooting. #LI-TW1

The Instrument Technician is a role designed to train individuals in the fundamentals of instrumentation troubleshooting and repair. This position serves as a developmental pathway toward more advanced instrumentation responsibilities. The technician will receive hands-on training in equipment diagnostics, calibration procedures, and safe laboratory practices.Key Responsibilities · Perform standardized calibration checks and ensure accurate data capture via system software. · Identify and utilize appropriate laboratory equipment and instrument components. · Troubleshoot and resolve basic issues with company instrumentation. · Conduct routine maintenance and make necessary equipment adjustments. · Fill Dewars with liquid nitrogen daily and replace dry nitrogen tanks and other gases as needed. · Consistently adhere to and promote safe work practices in all laboratory activities.Qualifications Preferred: Minimum of 5 years of hands-on experience in instrumentation. Proficiency in using a multimeter. Ability to read and interpret schematics. Demonstrated willingness to learn and develop proficiency in troubleshooting and repairing instrumentation across applicable departments.

About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit eose.com. Eos Energy Electrical Technicians provide support through the assembly of energy cube trays, assembly and disassembly of energy cubes, remediation of charged and discharged energy cubes, and perform initial tray level testing, ensuring each assembled tray is properly functioning. Electrical Technicians also are responsible for inspection of battery, adhere to our FAT system to perform testing, install our battery management system and string boards, read and understand drawings and blueprints, troubleshooting issues, energize and discharge batteries at 1500 volts and more! RESPONSIBILITIES Inspection of the energy block when received to insure no issues. Install Battery Management System (BMS) and string boards. Perform initial testing as outlined by the FAT (Factory acceptance testing). Use various hand and power tools correctly and safely to assemble sub-assemblies and products. Read and understand technical drawings, mechanical and electrical blueprints, and bills of materials. Inspect subassemblies and/or assemblies for defects by operating specialized test equipment, measurement devices, and visual checking. Identify and correct defects appropriately. Verify use of correct materials by inspection and parts lists; identify and correct process and material defects. Ensure the FAT is filled out completely and correctly. Troubleshoot issues both electronically and mechanically. Point of contact on shift for updates on progress to dept. manager/supervisor. Energize and discharge energy blocks at 1500 volts. Monitor data recorders, collect and analyze data, and change test parameters. KNOWLEDGE, SKILLS, AND ABILITIES Great organizational skills, ability to organize and understand and assist in defining priorities. Ability to perform any task within the department. Ability to train and coach less senior employees. Good communications skills, ability to relay information to necessary parties. Mechanical ability, as demonstrated by the proper use of hand and power tools. Proficient in Microsoft Office applications, especially Excel and Word. Ability to read and understand technical drawings, mechanical blueprints, and bills of materials. Ability to use hand and power tools and measurement devices safely and correctly. Ability to lift up to 50 pounds on a regular basis. Ability to inspect sub-assemblies and assemblies. Ability to judge the quality of sub-assemblies and assemblies produced compared to established standards, drawings, and instructions. Extensive ability to troubleshoot mechanical and electronic issues. Now hiring technicians of all levels of experience for various shifts! EDUCATION AND EXPERIENCE: Electrical Technician Associate: No experience required, associates degree in electrical required, demonstrated mechanical ability of proper use of hand and power tools Electrical Technician Level I: 2+ years of electrical experience, associates degree in electrical required, demonstrated mechanical ability of proper use of hand and power tools Electrical Technician Level II: 5+ years of electrical experience, high voltage experience required, industrial/manufacturing electrical experience required, journeyman electrician preferred, associates degree in electrical required, demonstrated mechanical ability of proper use of hand and power tools

Job Title: Engineering Technician - Entry-Level Opportunity Kickstart your engineering career in a dynamic R&D environment! We're looking for a motivated individual with a passion for building, testing, and troubleshooting electro-mechanical systems. This role offers hands-on experience with cutting-edge technology and the chance to collaborate closely with engineers on real-world product development. If you're an entry-level electrical or mechanical engineer eager to learn and grow, this is the perfect opportunity. Why You'll Love This Role * Hands-On Engineering Experience: Work directly with small-scale electro-mechanical systems in a lab setting. * Influence Product Design: Contribute to Design for Manufacturability and implementation decisions. * Collaborative Environment: Partner with experienced engineers and technicians to bring innovative products to life. * Career Growth: Gain exposure to advanced assembly techniques, quality assurance, and continuous improvement processes. What You'll Do * Assemble, test, and troubleshoot components, products, and systems. * Use hand tools, soldering equipment, and precision instruments to build and maintain assemblies. * Inspect components for quality and ensure compliance with engineering specifications. * Document test results and maintain accurate production records. * Support continuous improvement initiatives to enhance efficiency and reduce costs. * Maintain a clean, organized, and safe workspace. What We're Looking For * Education: Degree in Electrical, Mechanical, or related Engineering field (or equivalent hands-on experience). * Skills & Interests: * Strong attention to detail and problem-solving mindset. * Ability to read and interpret technical drawings and preliminary documentation. * Comfortable using hand tools, power tools, and measurement instruments. * Basic knowledge of soldering, crimping, and PCBA work (training provided if needed). * Bonus Points For: * Familiarity with IPC J-STD-001 soldering standards. * Exposure to ERP/MRP systems or Lean/Six Sigma principles. * A&P or ASE certifications. Work Environment You'll work in a state-of-the-art R&D lab, collaborating with engineers on innovative projects. Personal protective equipment is provided to ensure a safe and productive environment. Job Type & Location This is a Contract to Hire position based out of Pittsburgh, PA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Pittsburgh,PA. Application Deadline This position is anticipated to close on Jan 10, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Summary: In this role the Electrician will perform a range of duties to maintain, service, and repair electrical plant machinery and facilities including rolling mills, furnaces, machine tools, and auxiliary equipment. This is a union position under our collective bargaining agreement Essential Duties & Responsibilities: Interpret wiring diagrams, manufacturer's installation or service manuals, blueprints, product drawings, plant layouts, order flow and all commonly used documents in the facility. Install, maintain, and repair equipment and machines as necessary (such as automatic controls and control panels, power, or lighting service lines) with necessary fixtures and components to ensure proper operation. Maintain various types of machinery and electrical systems, including three-phase, controls, and DC equipment. Measure, cut, align, thread, and assemble conduit for electrical systems. Perform preventative maintenance services on equipment. Determine and trace cause of malfunctioning or improper operation of equipment. Operate crane and forklift as needed. Education & Experience: High School Diploma/GED required, additional education in industrial electrical systems from a college or trade school desired. 3+ years' experience working with industrial electrical systems, processing and/or troubleshooting. Journeyman card a plus. DC motor and controls a plus. Where the future is bright! Libertas Copper, LLC, dba Hussey Copper is at the forefront of the electrification of the economy, making life more efficient, safe, enjoyable, and healthy for everyone. As a producer of a critical component of electrical transmission and control equipment, Hussey Copper contributes to powering people's lives today for a better tomorrow. Libertas Copper, LLC, dba Hussey Copper is committed to providing Equal Employment Opportunities (EEO) without regard to race, color, religion, age, sex, national origin, disability, marital status, veteran status, sexual orientation, genetic information, gender identity and/or expression or any other protected characteristic under the applicable law. Libertas Copper, LLC, dba Hussey Copper exudes the utmost respect to the environment and safety of all individuals, inside and outside of the workplace, by promoting environmental sustainability and regulatory compliance, in regard to all local, state, and federal guidelines.

Work For Us Are you ready to join a dynamic team, focused on Safety, Wellness and Service? Do you thrive on working independently throughout the construction industry? Ignite your career by joining Triad Engineering, Inc.'s team as a Construction Materials Field Technician. While each day may include a wide array of responsibilities, your focus on and dedication to quality will ensure success. No experience? No worries! We are committed to investing in our team members and will provide training and advancement opportunities through technician certification programs. Feel the security of working for the Triad team by experiencing the following benefits: Excellent compensation and benefits package including: Medical, dental, vision, life insurance 401(k) plan Paid holidays Employee Stock Ownership Plan (ESOP) Company truck and fuel provided Personal Protective Equipment provided Clothing allowance Career Advancement Wellness Program What You'll Do As a Construction Materials Field Technician, your exposure to a wide variety of responsibilities may include but not be limited to: Perform routine quality control test procedures including concrete and nuclear moisture / density testing Complete and submit daily reports and Job Hazard Analysis forms Follow all corporate and job site safety procedures Become familiar with applicable plans and specifications Notify supervisor or Project Manager immediately of problems and deviations from plans and specifications Frequent exposure to clients May occasionally attend job site related meetings May occasionally perform routine testing in the lab Desired Qualifications High school diploma or equivalent Construction-related training or technical training desirable Certifications in Concrete and Soil preferred Must possess a valid driver's license and the ability to safely operate a motor vehicle Must possess the ability to read, write and perform basic math Must be comfortable communicating with the public Must be comfortable performing basic computer functions Must be available to work in all types of indoor and outdoor environments WHO WE ARE Triad Engineering, Inc. (Triad) is an employee-owned firm that cares about each other, our work, and our clients. Our involvement from property acquisition through construction affords us the ability to offer our expertise during all phases of a project which ultimately leads to greater success. At Triad, we are small enough to be responsive to individual client needs, yet large enough to remain at the forefront of our industry. We've heard from clients that our people make the difference. Come join the Triad team and help us continue to be the difference. As a multi-disciplinary consulting firm established in 1975, we focus on providing geotechnical and civil engineering, landscape architecture, environmental services, land surveying, construction testing and monitoring, drilling, and construction materials laboratory services, to a wide range of clients. We pride ourselves on being an employee-owned firm with nearly 200 employees throughout West Virginia, Virginia, Maryland, Pennsylvania and Ohio. Triad Engineering, Inc. is a Drug-Free Workplace. As a condition of employment, candidates are required to take and pass a pre-employment drug screening.

Job DescriptionFirm Description: Sheffler & Company, Inc. (Sheffler/SCI) is a growing Civil Engineering & Surveying Consulting firm with offices in Pennsylvania and Ohio. The Sheffler headquarters is located 12 miles north of the City of Pittsburgh. Gary A. Sheffler, Sr., PLS founded our company in 1970 and is still active in the company today. Garys son, Gary A. Sheffler, Jr., PE/PLS, is the Principal in Charge of Engineering & Surveying Services while his wife, Cristina Sheffler, serves as company President. The company is certified as a Womens Business Enterprise. Sheffler has extensive expertise in providing professional civil engineering and surveying services, focusing on private land development projects. Ourstaff of professionals possesses expertise in the areas of land development, site layout, grading, stormwater management, hydrology and hydraulics, soil erosion and sedimentation control, and surveying. SCI is technically oriented with over 95% of the work completed by our office in digital format. We have access to a variety of computer software programs which assist us in providing our engineering & surveying consulting services. Our staff consists of registered professional engineers and surveyors who strive to provide quality engineering and an unmatched level of personal service to every project. SCI utilizes partnering firms to provide Traffic Engineering, Geotechnical Engineering, and Aquatic Resource Investigation services. Position Requirements: Qualified candidates shall possess the following: 1-5+ years of experience in preparation of civil/site development & construction plans for residential and commercial projects utilizing Autodesk Civil 3D, v. 2016 or higher Extensive technical working knowledge of Autodesk Civil 3D relative to templates & standards, 3D surface modeling, earthwork analysis, street profile & corridor design, sewer pipe networks, etc. Excellent word processing and reading comprehension skills Ability to work independently and unsupervised Additional responsibilities include but are not limited to the following: Work as part of a team environment Ensure work is executed on time and in accordance with manager and client requirements while adhering to all company policies/procedures Project a positive attitude Possess excellent oral and written communication skills Communicate effectively and positively with all clientele and coworkers Additional duties as required Position Benefits: Company Paid Medical, Dental, Vision, Life and AD&D Insurance 401K with company contribution Profit sharing & performance bonuses Paid holidays Paid time off Company paid certification renewals if applicable Company supports a great work/home life balance Casual, results-driven company culture Opportunities for advancement Hourly rate commensurate with qualifications and experience, plus overtime Referral Program Salary/Wage: Rate commensurate with qualifications and experience $27.50 - $40.00 per hour + overtime

Job DescriptionSalary: Kopp Glass, a Pittsburgh-based manufacturer of high-performance, custom glass products, is seeking to hire a Robotics Technician/Engineer responsible for developing, implementing, and managing process parameters and resources for automated, robotic glass manufacturing technologies. This person takes a hands-on approach to equipment operation, adhering to key aspects of the Quality Management System (QMS) related to process improvement, product documentation, corrective action, and preventative action procedures while leading daily work order execution to fulfill customer orders. The role will support and perform critical preparatory and operational processes including activities associated with glass melting, forming, and analysis, blending the technical aspects with hands-on responsibilities.This is a fully onsite position that will be responsible for performing job functions in Rostraver Township (15012). Primary Responsibilities: Coordinates, executes, and optimizes the operation of production work cells including tooling, robotics, and forming, through implementation of engineering best practices in preparation to and during production. Leads and performs setup of equipment, operation of robotic and automated equipment, and evaluation of results from glass manufacturing work cells. Works with the engineering team to accomplish the daily work plan, which could involve equipment maintenance, programming, repairs in a variety of robotic areas, inventory, equipment cleaning, forklift use, manufacturing, and other tasks as assigned. Analyzes and resolves product related issues and sets up methods of prevention for future occurrences (root cause analysis and corrective action) through application of rigorous mechanical, glass science and engineering principles when executing the NCR/Corrective Action processes. Develops part and process specific documentation for the integration of products into new or existing manufacturing processes while supporting the industrialization of small-scale processes into commercially viable large-scale operations. Minimum Qualifications: Associates degree in robotics, electrical, mechanical engineering and/or engineering technology or related field. Bachelors degree preferred. Up to 5 years of manufacturing or robotics experience; Various positions available dependent on experience. Proficient Microsoft Office skills including, Word, Excel, and PowerPoint. Proficient verbal and written communication skills. Access to our facility (and therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) to U.S. Citizens and permanent residents of the United States. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes.

Job Description Mechatronics Technician Trainee - $1,500 Sign-On Bonus! Looking for meaningful work where you can make a difference in global innovation? Engineer a better future with Aerotech, a global leader in precision motion and automation. Our customers create some of the most innovative products on the planet, from life-saving medical devices to tools for deep space exploration. Our precision motion and automation systems make it all possible. Build a lasting, satisfying career at Aerotech, where we foster growth, empower employees and promote from within. You'll find unparalleled opportunities and a company that values your voice. We also provide an extensive total rewards compensation system, including: Bonus payments every 6 months Rich health plans Retirement planning with our 100% company-paid Employee Stock Ownership Trust If you're mechanically inclined or technically savvy with a passion for cutting-edge technology, we want to hear from you. Position Summary The Mechatronics Technician Trainee is an entry-level production position where successful candidates will participate in the Core Mechatronics Career Development Program. This (fully paid) on-the-job training program will align your skills with a career path customized to your strengths and interests. Participants will work within the Core Mechatronics Production department. For highly motivated individuals with a strong desire to learn, this is an excellent opportunity to launch or transition into a hands-on technical career. What will your day look like? At Aerotech, you will Participate in a structured training program intended to provide the skills necessary to become an expert in the precision manufacturing industry under the guidance of experienced training and leadership staff. Integrate theory with practical hands-on skills through written training material and direct coaching from leadership. Read wiring and assembly drawings to determine product requirements Master industry required skills such as precision measurement, alignments, and advanced troubleshooting. Assemble and test complex, high precision mechanical and electrical components using a variety of testing, measurement equipment and software Assemble/Wire/Test precision motion systems. Operate additive manufacturing (3D printing) equipment in the production of Aerotech parts. Attend and actively contribute to bi-weekly progress meetings to engage in feedback exchange with training personnel. Successful completion of the training program will qualify you to pursue more advanced roles throughout the organization. What will separate you from the rest? Experience with Strong mechanical and/or electrical aptitude Strong drive to continually advance your career Experience with hand tools such as wrenches, hex keys, torque wrenches, screwdrivers, flat stones and pliers Ability to read and interpret assembly drawings and schematics Effective computer literacy and use of software, such as an ERP system Troubleshooting and problem solving skills Participation in a technical education program preferred, but not required Minimum Qualifications Must have a High School Diploma or GED Benefits: Aerotech has been advancing industries with our precision motion technology for more than 50 years. Our employees are our future, and we continue to grow by investing in our employees through continuous paid on-the-job training in a clean and climate-controlled environment, while providing the following exceptional benefits and more! Competitive compensation Bi-annual bonus Annual raise eligibility UPMC Health Insurance Dental insurance Vision insurance Life insurance Retirement Plan Employee Stock Ownership Trust 401k Paid time off Parental leave Monday to Friday standard schedule Optional overtime - including Saturdays Referral program Professional development assistance Tuition reimbursement Must be authorized to work in the US currently and in the future without employer sponsorship. As an Equal Employment Opportunity/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, Veteran or disability status. The Company is collecting the information requested in this employment application for purposes of evaluating your suitability for hire by the Company. The Company will share the information that you provide in this employment application only with Company management officials who are involved in the hiring process or who are otherwise involved in making employment-related decisions on behalf of the Company. Powered by JazzHR 7VIRYywbsH

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online. Under direct supervision during shift work, performs skilled routine and multitask, both in the laboratory, shops and field in both normal and radiological areas of the plants, related to installation, calibration, maintenance, troubleshooting and testing of equipment associated with electrical, mechanical and instrumentation & control systems. Satisfactorily completes the scheduled Instrument & Control Technician Apprentice-Shift Training Program. Job Description Perform scheduled maintenance, calibrations, troubleshooting and repair and assist in the major maintenance and calibration of instrumentation and controls, reactor protection and associated equipment. As directed, performs maintenance on microprocessor, electronic, hydraulic and pneumatic instrumentation and control systems. Verifies and complies with Equipment Clearances and Radiological Work Permits associated with Instrument and Control maintenance work assignments. As directed, maintains proper operation of control systems by diagnosis and correction of operating perturbations through maintenance and calibration. Satisfactorily completes the scheduled initial, continuous, on-the-job and refresher training commitments identified in the I&C Technician Apprentice-Shift Training Program as accredited by the National Academy for Nuclear Training and multitask training. Maintains calibration and maintenance work areas for portable equipment associated with radiation monitoring. Maintains the I&C shops, job work sites, test equipment issue areas and lab equipment in a safe, orderly, and neat condition. Assists other groups in support of safe operations and maintenance of the nuclear site. Accurately completes all documentation associated with and required by assigned job tasks. Complies with all regulatory and site procedures and policies, including Site Emergency Plan and Technical Specifications. Assists in performing maintenance, calibrations, and troubleshooting on systems and equipment within the reactor containment and other radiological areas during all modes of plant operation. As directed, performs “pre-critical checkout” of reactor controls and instrumentation. As directed, sets up test equipment and assists the engineers in conducting tests of station equipment. Assists in performing maintenance and calibration of areas, process and portable radiation monitoring systems and equipment. Assists in performing the necessary rigging in handling of I&C related equipment and materials. As directed, assists computer personnel by performing board component level repair, I/O module hardware calibration, soldering, wire wrapping and cable lug terminations. As directed, performs maintenance on reactor control rod drive and control equipment. Assists in modifying control panels, both electrically and mechanically, for new or different installation of instruments and controls. Performs multitask and other work related to the above assigned or directed. Two year Post-High School relevant education or equivalent experience as deemed appropriate by Maintenance Management, in applicable field. Pass the Instrument and Control Technician Apprentice qualification test and EEI Standardize test. Satisfactorily completes, as scheduled, the initial, continuous, on-the-job, Training and qualifications and to proceed in line of progression to first class technician as identified in the I&C Training Program as accredited by the National Academy for Nuclear Training. Demonstrated work knowledge of electronic equipment and circuitry, and some knowledge of magnetic amplifier equipment. Demonstrated reasonable familiarity with the basic theories of mechanical instrumentation and control and their methods of application in nuclear power stations; and familiarity with physical/dimensional measurement techniques and methodologies. Demonstrated ability to “troubleshoot” instrumentation and control circuits. Demonstrated ability to interpret simple sketches, prints, and written instructions and to work from such recorded instructions. Demonstrated knowledge of and ability to apply, company safety regulations, policies, and practices. Must be capable of passing and maintaining the applicable discipline eye examination standards. Demonstrated reasonable familiarity of electrical and mechanical physical/dimensional measurements. Demonstrated reasonable familiarity of digital electronics and microprocessor based technology. Must be physically able and willing to utilize protective clothing, respirators, or other equipment essential to the requirements of maintaining a Nuclear Power Plant including making containment entries. Must be able to and willing to work in elevated or confined quarters and in radiation fields. Must have the physical ability to carry a minimum of 50 pounds tooling, test equipment, and plant equipment Job Family Plant Operations Company Vistra Nuclear Operations Company Locations Shippingport, PennsylvaniaPennsylvania We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today! If you currently work for Vistra or its subsidiaries, please apply via the internal career site. It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws. If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.