Controls technician jobs in Shoreline, WA - 239 jobs

Job DescriptionSalary: $44 - 57.57/hr Role: RoboticsHardware Technician IV The Senior / Lead Robotics Hardware Technician / Support Engineer is a leadership role responsible for defining the system-level hardware architecture for major product lines. This position drives the technical direction of hardware projects from concept to production, mentors the hardware team, andestablishesorganization-wide standards for reliability and validation. Ideal Candidates:The ideal candidate should be comfortable with travel 60-70% of the time and have prior experience with hand tools and basic power tools. This role will require travel between the Seattle, WA location and the Spokane, WA location. Please let us know if you also have the ability to also travel for short term work (up to 90 day trip) in Germany or other locations outside of the US (no required). Responsibilities: Define and own hardware architecture for complete robots or major product lines (actuators, sensors, power, safety, interfaces). Make key trade-off decisions among performance, cost, and reliability to meet business objectives. Lead multi-phase hardware projects from concept to production, owning the entire project lifecycle. Set technical direction, schedules, and milestones while coordinating across mechanical, electrical, controls, and manufacturing teams. Align daily technician tasks with critical project milestones to ensure effective resource utilization. Inspire respect and motivation within the team by ensuring all members are aligned on high-level goals. Champion Agile methodologies and utilize software relevant tools to streamline lab and engineering operations. Lead the implementation of robust QA/QC and issue-tracking processes. Define and oversee advanced analyses, including FEA (Finite Element Analysis), tolerance stackups, and reliability modeling. Establish system-level validation plans, including worst-case operating scenarios and regression tests. Create hardware standards, libraries, and best practices to guide the work of Tech IIII staff. Sponsor exploratory efforts to evaluate and integrate new hardware technologies. Mentor and coach staff, performing rigorous design reviews to ensure technical excellence and safety. Foster a culture of collaboration, respect, safety and ownership within the engineering pool. Maintain proactive communication with stakeholders to prevent silos and ensure alignment. Demonstrate proficiency in technical communication by writing comprehensive SOPs and maintaining accurate project documentation. Actively support and integrate into the company culture by consistently upholding its core values, purpose, and mission Exhibits behaviors that reflect a commitment to quality, continuous improvement, and high performance to achieve client and company goals Participates in on-site meetings and training as needed Qualifications: High School Diploma or GED required; Bachelors degree in Mechanical, Electrical, or Mechatronics Engineering preferred 3+ years of experience in robotics hardware design, systems architecture, or a related high-tech field Must have ability to travel 60-70% of the time between Seattle and Spokane with additional availability to travel to areas outside of the US desirable Proven experience serving in previous leadership capacities Expert-level knowledge of robotic systems architecture and full-lifecycle product development Proficiency in FEA and reliability analysis Strong project management capabilities with the ability to manage complex workflows Proficiency in using Solidworks (CAD) software for design and analysis Advanced ability to read and interpret technical and electrical schematics Exceptional leadership and communication skills with the ability to justify technical decisions to stakeholders Strategic thinking skills for developing and maintaining long-term product roadmaps Ability to work independently as well as lead and contribute to a cohesive team environment Ability to follow instructions from an engineer or supervisor precisely and consistently Possess a friendly and collaborative demeanor to work effectively as part of a team Possess strong initiative, reliability, and common sense Demonstrated work ethic and a history of reliable attendance Ability to work flexible schedules and shifts to meet company demands and client deadlines Ability to stand or remain on your feet for long periods of time Ability to remain mobile throughout labs and various workspaces Must be able to lift and carry up to 50 pounds unassisted and without accommodation Authorized to work for any employer in the U.S. without current or future visa sponsorship Ability to successfully pass a comprehensive background check Benefits: Employer pays 50% premiums of Health/ Dental/ Vision Insurance for employee and dependents Access to supplemental plans such as GAP, Disability, Accident, Whole Life, Identity Protection & more Paid leave and paid holidays 401(k) matching (up to 4%) Educational Reimbursement Supportive environment & company hosted events At Emtech, we are committed to a welcoming and accepting workplace for all our employees and applicants. We base employment decisions on qualifications, merit and in accordance with federal, state and local law requirements. We encourage all employees to actively contribute to a workplace culture that honors, respects, and uplifts one another. Together, we can create an environment that is free from discrimination and harassment, where everyone feels valued and empowered to thrive.

Tech III, Corrosion Control Type: Non-Exempt Work Schedule: Full-time Compensation: $47.19 - $47.19/hour Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of a Tech III, Corrosion Control at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance $11.41/hour Health and Welfare Benefit Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 12 paid days of vacation at the start of employment, paid sick leave Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera is seeking a detail-oriented and compliance-driven Tech III, Corrosion Control. The primary duties include performing advanced corrosion prevention, inspection, and maintenance tasks to protect metal surfaces, equipment, and facilities from deterioration. This role supports corrosion control operations, using established procedures and safety standards to extend the service life of structures and equipment. Typical duties include but are not limited to: Conduct advanced inspections of pipelines, tanks, structural steel, and equipment using specialized testing methods (e.g., ultrasonic, magnetic particle, cathodic protection surveys). Uses hand tools, precision instruments, and other specialized equipment to install, inspect, repair, maintain, and adjust impressed current and sacrificial anode cathodic protection systems. Prepares test instruments, conducts field tests, records and collects data for the preparation of reports. Prepares technical reports using PC-based systems that are pre-formatted for data collection, maintenance, and report generation using fundamental personal computer skills. Removes, repairs, restores and applies industrial coatings used to control corrosion and routine cleaning/maintenance of associated equipment. Maintains, repairs and/or replaces cathodic protection systems Oversee application of specialized coatings, paints, sealants, and corrosion inhibitors, verifying adherence to technical standards. Provide on-the-job training, guidance, and mentorship to Technician I and II employees. Qualifications: High School/Diploma GED is required. Minimum 5 years' experience in the corrosion control industry N.A.C.E. Certification Exam- CIP level 3 required. CIP Level 3 Oral Exam NACE-CIP3-001. U4 Cathodic Protection required. International Cathodic Protection Technologist (CP2) or higher required. Ability to read and interpret simple blueprints, schematics, and technical specifications. Must possess excellent oral and written communication skills. Must be able to prioritize tasks and work in a fast-paced environment Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. Must be able to lift and/or move up to 50 pounds. May be required to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be required. Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is required with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Per our government contract, 2.7.2.6, “No employee or representative of the Contractor will be admitted to the site of work unless satisfactory proof of U.S. citizenship is furnished.” To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

Job DescriptionJob ProfileJob Title: Process Automation TechnicianLocation: Burlington, WAHire Type: Direct HirePay Range: $30.00 - $40.00/hour Work Model: OnsiteRecruiter Contact: Luis Fernandez (lfernandez@imaginestaffing.net) Nature & Scope:Positional OverviewImagine Staffing is recruiting for a Process Automation Technician on behalf of our client, a national leader within the renewable Energy/Solar industry, in Burlington, WA. This is a direct hire opportunity offering a competitive wage, comprehensive benefits package, and long-term potential for professional growth and career advancement.As a Process Automation Technician, you will be responsible for monitoring, documenting, controlling process recipes and parameters, Out of Control Action Plans (OCAPs) within all processes and adjusting when required; regular review of the production schedule; preventive maintenance, troubleshooting, updating the inventory of spare parts and wearable parts on hand, setting reorder points, maximizing machine up-time and work with and assist the Quality Team to ensure product quality. Role & Responsibility:Tasks That Will Lead to Your Success Daily audit of all equipment capturing process recipes, and process control parameters. Support production and ensure that equipment process integrity is in place. Work with the Quality Team to Collect and evaluate operating and quality data to conduct equipment/recipe adjustment to ensure process optimization. Perform periodic checking of machine process parameters and recipes. Get to know the manufacturing process in detail (its process characterization) to and be able to identify when the process is deviating from the norm via Statistical Process Control (SPC) and take action via OCAPs to correct it or to escalate it to senior Eng. / Maintenance staff if unable to correct the problem. Perform inspection, cleaning, and maintenance of the equipment in accordance with operational instructions. Document routine manufacturing processes in approved Standard Work Instructions (SWIs). Lead and work with Production, Quality and Maintenance to Identify areas for improvement and optimize machine availability, cycle time, utilization, and cost via Value Stream Mapping (VSM). Initiate and lead PK, A3 and Apollo process to identify and implement containments, determine root cause analysis and prevent re-occurrence of machine failure and quality defects. Quick and effective diagnosis and troubleshooting of routine or minor problems. Provide technical solutions either by improving the process, machine modifications, or incoming material evaluation. Use Formulate test hypothesis and perform and document qualitative analysis of data by conducting proper DOE (Design of Experiment) and other statistical analysis testing tools to adjust processes and recipes to and maintain production quality and output. Troubleshoot nonstandard events on the production line and establish preventative measures to limit recurrence of such events through the PK (Process Killer) and A3 processes. Follow established standard process for training other employees as well as updating training manuals when necessary. Exercise informed and analytical judgment and initiative by leading Apollo process to resolving complex nonstandard problems. Develop and communicate recommendations to prevent machine down time and maintain quality levels. Participate in programs to improve productivity and output quality of the module. Ensure the equipment is operating in a safe manner and all safety devices are active. Support the team in improving the safety of the machine, where necessary. Skills & Experience:Qualifications That Will Help You Thrive Associate or bachelor's degree in a Science, Technology, Engineering, and Mathematics STEM or technical program (e.g., Microelectronics, Electronic Engineering Technology, Computer Electronic Engineering Technology) or be pursuing an associate or bachelor's degree in a STEM or technical program. Training in a technical field (e.g., Electronics, Mechanical), and a minimum of 6 months of hands-on experience. 2 years of work experience in fully/semi-automated manufacturing plant Knowledge in PLC, HMI, electro-pneumatic, pneumatic, hydraulic, electrical wiring, vision system, VFDs and chemical processes.

**Summary/General Description Of Job:** Incumbent uses various substances and tools to install, inspect, repair, maintain, adjust and control corrosion on impressed current and sacrificial anode cathodic protection systems at an advanced level. **Essential Duties & Job Functions:** - Uses hand tools, precision instruments, and other specialized equipment to install, inspect, repair, maintain, and adjust impressed current and sacrificial anode cathodic protection systems. - Prepares test instruments, conducts field tests, records and collects data for the preparation of reports. - Prepares preliminary analysis of data to determine appropriate response actions that may include generation of repair work, or referral of information for advanced analysis by Registered Mechanical Engineer, who provides technical guidance on corrosion control requirements. - Prepares technical reports using PC-based systems that are pre-formatted for data collection, maintenance, and report generation using fundamental personal computer skills. - Removes, repairs, restores and applies industrial coatings used to control corrosion and routine cleaning/maintenance of associated equipment. - Maintains, repairs and/or replaces cathodic protection systems. - Performs other related duties as assigned. May perform work in other classifications when incidental work is necessary to the accomplishment of the work assignment. Significant work in another job classification may be required if accompanied by any wage adjustments applicable. **Accountable For:** - The proper use of tools and equipment commonly used in the corrosion control field. - Completing all mandated training requirements per government and management directives. - Timely and cost-effective performance of duties. - Timely completion and accuracy of all departmental work. - Dealing with a variety of people in a professional, courteous manner in diversified situations. - Adherence to established company safety policies and good industrial and office safety practices. - Compliance with company Standard Operating Procedures and Personnel policies and procedures. - Having the ability to work well under pressure. **Job Requirements (Education, Experience, Professional Associations):** **Mandatory** - Five (5) years' experience in the field of corrosion control. o An Associate's Degree in engineering, physical sciences, or a related field may be substituted for two (2) years of the required experience if the course of study included physics, chemistry, and mathematics. - Thorough familiarity with repairing electrical and electronic application of all Cathodic Protection equipment and devices. - Thorough familiarity with electrical and electronic test equipment. - Ability to determine the selection and application of industrial protective coatings. - Basic math and communications skills. - Ability to read and interpret simple blueprints, schematics, and technical specifications. - Ability to meet and maintain company physical and security requirements, including respirator qualification, and clearance eligibility when required. - Must possess good communication skills for a service team environment. - Valid state driver's license with acceptable driving record - Ability to successfully pass any background checks and/or drug testing required on the contract. - U.S. Citizenship. **Preferred** - Certification and/or training provided by the National Association of Corrosion Engineers (N.A.C.E.) - Certification Exam - CIP Level 3 Oral Exam NACE-CIP3-001. U4 UST Cathodic Protection - U.S. Citizenship. Wages -$45.16 per hr Competitive pay and top-shelf benefits package supporting our national defense. Our facilities team serves a diverse range of high-value national strategic missions. Benefits package with United Steelworkers which can exceed $10/hour, includes: - Paid vacation. Two weeks at one year, grows to three weeks after five years and four weeks after ten years. - Personal Leave 1 hour of paid Personal/Sick leave for every thirty (30) hours worked. - Pension and 401K - Medical, vision, dental and life insurance - 11 Paid Holidays

Tech II, Corrosion Control Type: Non-Exempt Work Schedule: Full-time Compensation: $41.64 - $41.64/hour Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of a Tech II, Corrosion Control at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance $11.41/hour Health and Welfare Benefit Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 12 paid days of vacation at the start of employment, paid sick leave Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera is seeking a detail-oriented and compliance-driven Tech II, Corrosion Control. The primary duties include performing advanced corrosion prevention, inspection, and maintenance tasks to protect metal surfaces, equipment, and facilities from deterioration. This role supports corrosion control operations, using established procedures and safety standards to extend the service life of structures and equipment. Typical duties include but are not limited to: Conduct advanced inspections of pipelines, tanks, structural steel, and equipment using specialized testing methods (e.g., ultrasonic, magnetic particle, cathodic protection surveys). Uses hand tools, precision instruments, and other specialized equipment to install, inspect, repair, maintain, and adjust impressed current and sacrificial anode cathodic protection systems. Prepares test instruments, conducts field tests, records and collects data for the preparation of reports. Prepares technical reports using PC-based systems that are pre-formatted for data collection, maintenance, and report generation using fundamental personal computer skills. Removes, repairs, restores and applies industrial coatings used to control corrosion and routine cleaning/maintenance of associated equipment. Maintains, repairs and/or replaces cathodic protection systems. Qualifications: High School/Diploma GED is . Minimum 3 years' experience in the corrosion control industry N.A.C.E. Certification Exam- CIP level 3 . International Cathodic Protection Technologist (CP2) or higher required. Ability to read and interpret simple blueprints, schematics, and technical specifications. Must possess excellent oral and written communication skills. Must be able to prioritize tasks and work in a fast-paced environment Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. Must be able to lift and/or move up to 50 pounds. May be to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be . Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Per our government contract, 2.7.2.6, “No employee or representative of the Contractor will be admitted to the site of work unless satisfactory proof of U.S. citizenship is furnished.” To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

Job DescriptionBenefits: Competitive Wages Tools Provided Uniforms Provided Company Vehicle Paid Training Flexibility Career Advancement Opportunities Growing Industry 401(k) 401(k) matching Company car Dental insurance Employee discounts Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Job Title: Access Control Technician Reports To: General Manager or Franchise Owner Key Areas of Responsibility: The Access Control Technician position is an integral part of FlyLock Security Solutions Seattle and is key to the growth of the company. All Access Control Technicians must have the ability to work well in a high-paced working environment. The individual must work well as part of the team and independently from the FlyLock owner. The Access Control Technician position is a hands-on technical position geared toward an individual who has a technical mindset. Ideal candidates will have locksmithing knowledge and demonstrate the ability to learn new technical methods and techniques. Requirements/Responsibilities Valid Low Voltage Energy 06 Journeyman License - WA Minimum of 2 years experience in technical hands-on field experience in security solutions, access control, door hardware, and other skilled trades. Inspects, installs, and services all basic and complex commercial and residential access and video systems. Performs advanced, complex troubleshooting and repair functions for commercial and residential access and video systems such as programming; cleaning detectors; testing controls and peripheral devices; mounting, replacing, and testing equipment according to specifications; running cable, etc. Instructs customers in access and video systems operation by recommending ways to use additional features and capabilities of system installations. Respond to customer questions and requests. Recommend corrective services to adjust customer complaints. Diffuses difficult and complex customer issues. Builds and maintains working relations with the sales staff. Defines the scope of add-ons and change orders, seeks customer approval, and writes up paperwork. Performs site visits with sales consultants for existing or potential clients. Takes responsibility for the project from first walk-through to final sign-off and hand-offs to service. Maintains accurate records of all inspections/service calls and troubleshooting as required including documentation and updating paperwork. Acts as onsite project lead to meet project timelines and goals and oversees lead technicians, technicians, apprentices, and subcontractors. Other duties as required by management. Nice to Have: Experience with systems mentioned below is useful but not all required. Access Control - Avigilon ACM, Linear Emerge3 &50P, S2, Lenel Kantech, Honeywell WinPak, DSX, Maxxess Access, AMAG Symetry, Keyscan System7, Brivo, OpenPath Credentials and Biometrics - HID, Aptiq, AWID, Suprema, BioConnect, MyIris, IrisID, LG Iris, Schlage, L1 Indenity, NEDAP, TRES443/900 Long Range Readers, Object Detection CCTV - Exacq, Avigilon , Axis, Arecont, ACTi, Pelco, HikVision, Dahua, LPR Lock Hardware HES, Rutherford, Schlage, Allegion Brands, Assa Brands, SDC Controls, Lock Retrofit Kits, Magnetic Locks, Electrified Trim Sets, Electrified Crash Bars, Electrified Strikes, Electrified Handsets, Schlage NDE Networks - Netgear, Dlink , Ubiquit, Fiber Optics, SPF Modules, Fiber Optic Testing and Termination Wireless- Ubiquiti, Firetide, Fluid Mesh Physical Requirements: Must be able to fluently understand, speak, and write English. Ability to push, pull, and lift at least 50 lbs. Ability to kneel, crouch and stoop. Ability to reach above and below the shoulders. Ability to use hands and fingers to grasp, twist, and pull. Ability to climb a ladder and work above ground. Withstand external weather conditions year-round.

Controls Technician - Seattle, WA - Large HVAC & Controls Company Controls Technician RESPONSIBILITIES: Well versed in troubleshooting controls BAS systems Knowledge of controls programming and experience rewriting sequences Fundamental understanding installing and testing building automation systems Strong understanding of commissioning protocols and point to point check outs Work closely with controls installations and start up/termination of equipment and programs Troubleshoot and manipulate current installed BAS programs Communicate efficiently with building owners as well as end users, and general contractors Ability to work in a team environment COMPANY INFO: Founded in over 50 years ago. Clients include: Commercial, Hospitality, Hospitals, Education, Colleges, Government, Industrial, Construction Service, design-build/new construction, Retrofit Work/Services: HVAC Service and Maintenance, Smart Maintenance, Electrical Services, Plumbing Services, Building Automation/Controls, TAB and Commissioning, Energy Savings, Boilers/Chillers, Equipment repair, tenet improvement and retrofits. OFFERED Competitive Compensation 401K with Match Company Vehicle Excellent Benefits: Medical, Dental, Vision Short Term/Long Term Disability and Life Insurance Laptop, Cellphone, Vehicle Vacation & Holiday

**$3,000 Sign-on Bonus to eligible new employees joining UW Medicine** **HARBORVIEW MEDICAL CENTER** has an outstanding opportunity to hire a **Control Technician** . **WORK SCHEDULE** + Monday-Friday, Days + No Telework **DEPARTMENT DESCRIPTION:** Our vision is to create a supportive and empowering workplace for all, provide unparalleled experiences for our customers and patients, and improve the quality of life and health of the public. **POSITION HIGHLIGHTS** + Perform skilled work in the inspection, testing, servicing, installation, and maintenance of mechanical, pneumatic, electronic, electrical, and computer controls for heating, air-conditioning, and related equipment. + Work requires skills in electronic, pneumatic and mechanical control systems, and the ability to work independently with little supervision. **PRIMARY JOB RESPONSIBILITIES** + Install, modify, and maintain HVAC and refrigeration control systems. + Troubleshoot and repair fire alarms and supervisory control components. + Fabricate and install temperature and humidity controls; assist with system design. + Use specialized tools for repair and calibration. + Manage inventory of control parts and components. + Perform related duties as assigned. **REQUIRED POSITION QUALIFICATIONS:** + Completion of a four-year approved institution course as a Control Technician Trainee; OR four years of applicable experience in installation, repair, and maintenance of electrical and pneumatic control systems. + Vocational or trade school training in control mechanisms may be substituted, year-for-year, for work experience up to a maximum of two years. **ABOUT HARBORVIEW MEDICAL CENTER** As the region's only Level I Trauma and verified burn center, Harborview Medical Center is a comprehensive healthcare facility owned by King County and operated by UW Medicine. It is dedicated to providing specialized care for a broad spectrum of patients from throughout the Pacific Northwest, including the most vulnerable residents of King County. It provides exemplary patient care in leading-edge centers of emphasis, including emergency medicine, trauma and burn care, neurosciences, ophthalmology, vascular surgery, HIV/AIDS, rehabilitation, mental health and substance abuse care. Harborview employees are committed to the vital role the institution plays in the immediate community, as well as the entire Northwest region. Challenge. Collaboration. Compassion. (******************************************************************************** **ABOUT UW MEDICINE - WHERE YOUR IMPACT GOES FURTHER** UW Medicine is Washington's only health system that includes a top-rated medical school and an internationally recognized research center. UW Medicine's mission is to improve the health of the public by advancing medical knowledge, providing outstanding primary and specialty care to the people of the region, and preparing tomorrow's physicians, scientists and other health professionals. All across UW Medicine, our employees collaborate to perform the highest quality work with integrity and compassion and to create a respectful, welcoming environment where every patient, family, student and colleague is valued and honored. Nearly 29,000 healthcare professionals, researchers, and educators work in the UW Medicine family of organizations that includes: Harborview Medical Center, UW Medical Center - Montlake, UW Medical Center - Northwest, Valley Medical Center, UW Medicine Primary Care, UW Physicians, UW School of Medicine, and Airlift Northwest. Become part of our team. (******************************** Join our mission to make life healthier for everyone in our community **Compensation, Benefits and Position Details** **Pay Range Minimum:** $81,636.00 annual **Pay Range Maximum:** $108,792.00 annual **Other Compensation:** $3,000 Sign-on Bonus for eligible new employees **Benefits:** For information about benefits for this position, visit ****************************************************** **Shift:** First Shift (United States of America) **Temporary or Regular?** This is a regular position **FTE (Full-Time Equivalent):** 100.00% **Union/Bargaining Unit:** WFSE Skilled Trades **About the UW** Working at the University of Washington provides a unique opportunity to change lives - on our campuses, in our state and around the world. UW employees bring their boundless energy, creative problem-solving skills and dedication to building stronger minds and a healthier world. In return, they enjoy outstanding benefits, opportunities for professional growth and the chance to work in an environment known for its diversity, intellectual excitement, artistic pursuits and natural beauty. **Our Commitment** The University of Washington is committed to fostering an inclusive, respectful and welcoming community for all. As an equal opportunity employer, the University considers applicants for employment without regard to race, color, creed, religion, national origin, citizenship, sex, pregnancy, age, marital status, sexual orientation, gender identity or expression, genetic information, disability, or veteran status consistent with UW Executive Order No. 81 (*********************************************************************************************************************** . To request disability accommodation in the application process, contact the Disability Services Office at ************ or ********** . Applicants considered for this position will be required to disclose if they are the subject of any substantiated findings or current investigations related to sexual misconduct at their current employment and past employment. Disclosure is required under Washington state law (********************************************************* . University of Washington is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sexual orientation, gender identity, sex, age, protected veteran or disabled status, or genetic information.

A first review of applications will be done in the week of January 19. Kitsap County is seeking a dynamic Instrumentation and Control (I&C) Technician/Specialist to join the team at the Wastewater Treatment Plant. This critical role offers an exceptional opportunity to advance your career while making a lasting impact on the health and well-being of our community by ensuring the seamless operation of essential wastewater treatment systems. As an I&C Technician/Specialist, you'll be integral in supporting the county's Sewer Utility (SU) infrastructure through the installation, calibration, maintenance, and repair of complex instrumentation and control systems. This position offers a unique opportunity to work with cutting-edge technology and develop specialized skills, all while contributing to the safe and efficient operation of our wastewater facilities. Whether you're hired as a Technician or Specialist, this role provides an incredible growth trajectory. Technicians automatically progress to Specialist after completing the required training and development, giving you the perfect blend of hands-on learning and career advancement. As a member of our team, you'll be involved in critical maintenance and system upgrades, ensuring that the systems supporting the county's wastewater treatment and sewer pumping operations function at peak performance. As the Instrumentation and Control Technician/Specialist, you will: * Perform Preventative Maintenance: Execute maintenance and repairs on essential equipment including flow meters, analyzers, level devices, telemetry systems, and PLCs, using tools such as multimeters and frequency meters. Ensure optimal system performance and operational efficiency. * Troubleshoot and Repair: Identify and resolve problems with instrumentation systems, PLC interfaces, radio telemetry, and electro-mechanical equipment used in wastewater treatment. Utilize troubleshooting techniques with tools like voltmeters and digital calibrators. * Install and Develop Equipment: Support the installation and development of new instrumentation and software for plant upgrades, including troubleshooting and editing industrial software and ensuring proper integration with SCADA systems. * Independent Work: Regularly operate without direct supervision, demonstrating the ability to take initiative and make decisions to keep systems running smoothly. * Support System Improvements: Contribute to the continuous enhancement of the SU's treatment plant and pump stations by supporting upgrades and ensuring equipment meets evolving needs. What You Bring: Professional Credentials/Licensing: * Technician: Two years of experience in repair, maintenance, installation, operation, or calibration of electronic instruments and systems used for monitoring, measuring, and controlling physical or chemical processes in industrial or laboratory settings or closely related field. Equivalent combination of related experience and related education demonstrating required knowledge, skills, and abilities to perform the job. * Specialist: Associate's degree in Instrumentation & Control Technology, Electrical/Electronic Engineering Technology, Industrial Automation, or a closely related field from a college or university accredited by an agency recognized by the US Department of Education AND three years of experience in repair, maintenance, installation, operation, or calibration of electronic instruments and systems used for monitoring, measuring, and controlling physical or chemical processes in industrial or laboratory settings or closely related field. Relevant work experience demonstrating required knowledge, skills, and abilities may substitute for educational requirements. Work experience is essential and cannot be replaced by additional education. * Failure to Progress: Employees who fail to obtain required certifications, licenses, or credentials, or who do not consistently demonstrate required performance and competencies, will not progress to the next classification. The department will take appropriate personnel action in accordance with county policies. Technical/Industry Background: * Proficiency in the maintenance and repair of complex electronic and mechanical systems, including telemetry, flow meters, and PLC systems. Experience with SCADA systems and industrial software development is highly valuable. * Strong knowledge of instrumentation theory and process control applications, as well as the ability to interpret technical drawings and repair manuals. Specialized Expertise: * Ability to troubleshoot and repair industrial systems independently, using advanced electronic testing equipment. * Familiarity with three-phase motors, control loops, and PLC programming to optimize system performance. Communication/Interpersonal Skills: * Demonstrated ability to communicate effectively in both written and oral formats, contributing to team collaboration and clear documentation of repairs and system updates. * Ability to work well with colleagues, vendors, and management, maintaining positive relationships while adhering to safety and policy guidelines. Additional Preferred Qualifications: * Experience with HMI/SCADA systems, PLC ladder logic, and industrial software applications is highly beneficial. * Ability to work flexible hours, including weekends, holidays, and on-call duties. For the complete job description: **************************************************************************************** For more information about the Wastewater Treatment Plant: ******************************************** Tour the Central Kitsap Treatment Plant: ************************************** * Who May Apply: This position is open to the general public. Applications will be screened for qualifications and completion of all the required materials and forms. The most competitive applicants may be contacted for further steps in the selection process, which may include testing for office and computer skills. * This position is classified as eligible for overtime under the Fair Labor Standards Act (FLSA) * This position is covered under a collective bargaining agreement with UTILITIES TEAMSTERS LOCAL589 and the KITSAP COUNTY PERSONNEL MANUAL. Membership in the union is optional. Internal applicants should be aware that a change in union status or bargaining unit may impact your benefits and accruals. Please contact Human Resources if you have questions. * Prior to employment, the successful candidate must: * Submit official transcripts from an accredited college or university or business school, if education is being used to meet the minimum qualifications. * Pass all job-related examinations/tests necessary to demonstrate required knowledge, skills and abilities, as determined by the hiring authority at time of job posting. * Authorize and complete a criminal background check. Information received is reviewed on a case-by-case basis and will not necessarily remove a candidate from consideration. * The successful incumbent must meet the driving requirements of this position and submit a copy a current driving record/abstract (from state of residency) to review for eligibility to drive for Kitsap County prior to employment. The successful incumbent must obtain a valid Washington State Driver's License prior to hire and maintain a satisfactory driving record as outlined in the Kitsap County Vehicle Use Policy. This position is categorized as: * Category 1:Driver operates County-owned vehicle. * Report for duty on time and remain at work until the end of their scheduled shift even if an inclement weather event or emergency is declared as an "Essential Employee" under the Public Works Inclement Weather/Emergency Response policy. * Kitsap County is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please contact our Human Resources Office. * This posting may be used to fill future openings. * The work hours for this position are M-F, 6:30 am - 3:00 pm * Only authorized employees and hiring authorities have access to the application materials submitted. Per RCW 42.56.250, all applications for public employment, including the names of applicants, resumes, and other related materials submitted with respect to an applicant are exempt from public inspection.

Seattle, WA Work for a top-tier HVAC equipment and contracting services company. They are looking to add an HVAC Controls Technician to their growing team! In this role, you will program temperature control systems based on project specifications and perform installation, warranty, emergency, and maintenance services on commercial HVAC systems. If you have expertise in commercial HVAC and building automation systems and excel in customer support, this role is for you! Controls Technician Responsibilities: Program control system databases according to project specifications and manufacturer guidelines. Calibrate and verify control systems to ensure they comply with operational sequences and commissioning standards. Assist in developing graphical user interfaces for various projects. Train customers on operating and maintaining temperature control systems. Update as-built documentation and submit redlined drafts to application engineers. Identify potential sales opportunities and promote service contracts during start-up and commissioning. Controls Technician Qualifications: At least 1 year of DDC/BAS control system experience. Valid driver's license. In-depth knowledge of HVAC, control systems, building automation, electrical systems, energy management, fire alarms, and related fields. Proficiency in programming and troubleshooting systems such as Distech, KMC, Schneider, Siemens, Johnson Controls, and/or Tridium/Honeywell. Pneumatic controls experience is preferred. Company Benefits: Medical, Dental, and Vision Insurance 401k with matching Paid Time Off and Holidays Profit Sharing/Bonus Program Pet Insurance Compensation: $80K - $95K

Job Title: Instrumentation Technician Instructor We are seeking a skilled and experienced Instrumentation Technician Instructor to join our training team. The ideal candidate will have a strong background in instrumentation and control systems, along with a passion for teaching and guiding the next generation of technicians. As an instructor, you will deliver hands-on and theoretical training, helping students develop the skills needed to succeed in the industry. Key Responsibilities: - Deliver instruction in instrumentation technology, including control systems, calibration, troubleshooting, and maintenance. - Guide students through hands-on training with industry-standard tools such as Emerson, Fluke, and HART communicators for configuration, calibration, and troubleshooting. - Prepare and organize instructional materials, lab activities, and assessments that align with industry standards. - Foster a positive, interactive classroom environment that encourages participation and skill development. - Assess student progress and provide constructive feedback to help them achieve their learning goals. - Maintain a safe and organized workshop environment, ensuring equipment is in working order and safety protocols are followed. Qualifications: - 5+ years of hands-on experience as an Instrumentation Technician, with expertise in installation, calibration, troubleshooting, and maintenance of instrumentation and control systems. - An associate degree or certification in Instrumentation Technology, Electrical Engineering, or a related field. - Strong working knowledge of industry-standard tools, including Emerson, Fluke, and HART communicators. - Excellent communication and interpersonal skills, with the ability to simplify complex concepts for students. - Prior teaching or training experience is a plus but not required; a passion for mentoring and developing others is essential. Compensation and Schedule: This is a part-time position offering $40 per hour, with classes held during nights and weekends. Application Instructions: If you are passionate about instrumentation and want to share your expertise with aspiring technicians, we encourage you to apply. Please submit your resume, cover letter, and references detailing your relevant experience and qualifications.

Most companies claim to have the best people. We say to them, "Keep dreaming." Our people are second to none. They set us apart with their entrepreneurial spirit and ambition. They come to us from the likes of Amazon, Microsoft, Nordstrom, Starbucks and the sports world, bringing energy, bold ideas and a willingness to dive into the unfamiliar. It's our people that make BDA the top global Merchandise Agency to work for. Location: Woodinville, WA (onsite 4 days a week, work from home on Friday) Job Summary Technology Enablement Engineer - Global IT Operations & Infrastructure position at BDA will be the primary owner of all innovation initiatives within IT Operations & Infrastructure. This position will provide vision, design, project management, hands on interaction, and team leadership. We are a small, dedicated, talent-dense IT team, who is comfortable wading into a broad variety of networking platforms and vendors, as well as contributing to other department goals and objectives. Technology Enablement Engineer ensures that BDA employees worldwide have seamless, intuitive, and resilient technology experiences. This role sits at the intersection of Global IT Operations, Infrastructure, and user experience, focusing on simplifying complex systems, enabling self-service, and introducing AI, automation, and digital tools to make technology effortless, efficient, and enjoyable. DUTIES AND RESPONSIBILITIES Enhance the global employee technology experience, ensuring tools and systems are intuitive, reliable, and consistent across regions. Transform complex IT processes into zero-touch, easy-to-follow workflows that empower employees to resolve issues independently. Drive the adoption of AI, automation, and modern digital tools to accelerate work, reduce manual effort, and improve resiliency. Support technology rollouts globally, helping teams adopt new systems confidently and efficiently. Develop clear, engaging, and consumable learning content: videos, guides, microlearning, and tips tailored to diverse technical comfort levels. Gather employee feedback on systems and workflows to continuously improve the employee experience. Collaborate with IT Operations, Infrastructure, and business teams worldwide to remove friction and simplify work processes. Promote a resilient, zero-touch Global Help Desk approach, where employees can solve issues quickly through self-service and automated support. JOB SKILLS AND TRAITS Excellent communication skills, able to explain complex technology in simple, user-friendly ways. Experience in IT support, service management, or employee experience at a global scale. Familiarity with AI-driven solutions, automation, and modern workplace technology. Strong empathy, patience, and dedication to helping employees succeed. Ability to collaborate with teams across all levels and geographies, accommodating varying technical comfort levels. Understanding of resiliency, high-availability systems, and global IT infrastructure QUALIFICATIONS Seamless, intuitive, and resilient technology experiences for employees worldwide. Higher adoption of digital tools, AI, and automation. Faster issue resolution with minimal human intervention through zero-touch solutions. A consistent, modern, and positive employee experience across all regions and IT systems. #LI-AH1 #LI-Onsite We are pleased to share the base salary range for this position is $110,000 to $130,000. If you are hired at BDA, your compensation will be determined based on factors that may include geographic location, skills, education, and experience. In addition to these factors, we believe in the importance of pay equity and consider internal equity of our current team members as a part of any offer. In the spirit of pay transparency, the range listed is the full base salary range for the role and hiring at the top of the range would not be typical, in order to allow for future salary growth. The range listed is just one component of BDA's total compensation and rewards programs, which includes: robust PTO; vacation, a paid volunteer day, holidays and summer Fridays, Benefits; medical, dental, vision, life, and AD&D insurance, 401k; tuition reimbursement, mental health and financial wellness programs and professional development opportunities including tuition reimbursement. Certain revenue-generating positions may be eligible for incentive compensation. BDA is more than a workplace - it's a family. For more than four decades we've promoted a vibrant and welcoming culture that not only accepts but demands you to be different. The quirky, the bold, the creative and the unique make up the foundation of a company that the most iconic brands in the world look to help tell their story through the power of merchandise. Connect With Us! Not ready to apply? Connect with us for general consideration. For more information: ************** For information about BDA's privacy policy for job applicants click here. Must be 18 years or older to apply.

Company: The Boeing Company The BCA Engineering Operations and Enablement team is seeking a User Validation and Test Engineering Tech. Specialist - Release Focal to join our Engineering Processes and Tools User Validation and Test (UV&T) team in Everett, Washington, as a Release Focal. This position is integral to the global expansion of services within Engineering and will connect with an established network of testers across our U.S.-based sites and Global Design Centers. The role will facilitate full collaboration, knowledge sharing, and effectiveness across the entire engineering value stream. The Engineering Processes and Tools Test and Validation Release Focal is responsible for developing, implementing and executing test plans to ensure complete and comprehensive validation of engineering processes and tools. You will ensure that all tools and processes meet the required standards and specifications of the business before deployment in production. In this role, you will collaborate with cross-functional engineering teams to enhance product quality, streamline workflows, and support continuous improvement initiatives. Position Responsibilities: Collaborate with engineering teams to identify testing requirements and specifications of engineering tools and processes. Develop, plan and coordinate the execution of test plans for the validation of engineering processes and tools pre-production. Work closely with Engineering functions to identify testers to align with the plans. Ensure thorough communication to all stakeholders during development and execution of test plans. Facilitate thorough testing and validation of engineering tools to ensure functionality, reliability, and compliance with the business. Capture and analyze test results and provide detailed reports on progress/performance to plan. Capture, prioritize and assign issues for resolutions. Ensure continuous improvements in the efficiency of our testing methodologies. Develop and implement best practices for testing and validation. Consult with Engineering teams to discover continuous improvement opportunities and to adopt new testing and validation best-practices. Stay updated on industry trends and advancements in engineering tools and processes test and validation methods. This position is expected to be 100% onsite. The selected candidate will be required to work on-site at one of the listed location options. Basic Qualifications (Required Skills/Experience): Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 10 or more years' related work experience or an equivalent combination of education and experience (e.g. Master +8 years' related work experience, 14 years' related work experience, etc.). Proven experience in testing and validation of engineering processes and tools in a high velocity and pressure environment. Strong understanding of engineering principles/methodologies and CADCAM tools. Strong understanding in IT software deployment. Proficiency in data analysis and reporting tools. Strong project management skills and methodologies. Excellent problem-solving skills and attention to details. Strong communication and collaboration skills. Preferred Qualifications (Desired Skills/Experience): Bachelor's degree in Engineering (or equivalent experience), Computer Science, or a related field. Experience with software development and testing methodologies. Knowledge of automation tools and techniques for testing and validation. Experience in process improvement methodologies (e.g., Six Sigma, Lean) Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies . At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $108,800 - $147,200 Language Requirements: Not Applicable Education: Not Applicable Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Technician Electromechanical (Aviation) Status: Non-Exempt Department: Electromechanical Shop (1131) Schedule: Monday-Friday, 5:55AM-2:30PM (40 hours/week), subject to overtime SUMMARY: This position is primarily responsible for the repair/overhaul of pneumatic/electrical operated aircraft components. The position cross-trains in other departments. The position requires the ability to read/write/understand the English language, following directions, and work in various teamwork settings. ESSENTIAL DUTIES AND RESPONSIBILITIES: Test, disassemble, inspect, repair and reassemble aircraft components. Work overtime and holidays on a short notice. Follow customer s special instructions and requirements. Follow all company procedures and policies. Follow all safety and security policies and regulations. Back up department functions, cross-train in other departments and performs other duties as necessary. Report to work on a regular and consistent basis. REQUIRED ABILITY TO: Read and understand component maintenance/overhaul manuals. Read and understand drawings, wiring schematics and flow diagrams. Be a reliable self-starter. Demonstrate the use of common hand tools. Demonstrate the use of torque wrenches, micrometers, dial calipers and multi-meters. Stand and work for long periods of time. Lift, move, push and pull up to fifty (50) lbs. on a consistent basis. Demonstrate good verbal and written communication skills in English. Build alliances, partnerships and collaborate with co-workers in a tactful, professional and respectful manner. Be a team player with strong interpersonal skills. Resolve workplace differences and conflict to achieve goals and objectives in a professional manner. Foster an atmosphere of new ideas, input and creative solutions when faced with challenges. Listen to others attentively and retain/process information effectively. Promote a professional culture that is trustworthy, honest, and socially responsible while championing an energetic and positive work culture. REQUIRED EDUCATION/EXPERIENCE: High School degree or equivalent. Valid driver s license and good driving record. This position requires drug testing and criminal background check in accordance with FAA regulations. Must be legally authorized to work in the United States. 6 months + of mechanical experience. DESIRED EDUCATION/EXPERIENCE: Airframe or Airframe and Powerplant license. 1 year + of experience of electro-mechanical experience. WORKING CONDITIONS: Continuous work in manufacturing/production setting. Continuous walking and standing, and lifting, pushing and pulling heavy objects throughout the work day. Flexibility to work additional hours and occasional weekends.

Job Description About the Company Armada is an edge computing startup that provides computing infrastructure to remote areas where connectivity and cloud infrastructure is limited, as well as areas where data needs to be processed locally for real-time analytics and AI at the edge. We're looking to bring on the most brilliant minds to help further our mission of bridging the digital divide with advanced technology infrastructure that can be rapidly deployed anywhere . About the Role As a Distinguished Engineer / Technical Fellow, you will be the primary architect of Armada's long-term technical vision. This is a "builder-leader" role for a world-class technologist who possesses a deep, fundamental understanding of data center architecture, high-density compute, and massive-scale AI infrastructure. You will solve the most difficult technical hurdles across our core product suite while leading the R&D for "Next Horizon" projects, such as Data Centers in Space. Beyond internal development, you will act as a key technical diplomat, collaborating with our most strategic industry partners to design deep-tech solutions that deepen Armada's product adoption and expand our reach into entirely new frontiers. Location: Bellevue, WA, San Francisco, CA , or Remote What You'll Do (Key Responsibilities) Architecting the Universal Edge: Lead the evolution of the Armada Edge Platform (AEP), ensuring seamless orchestration of compute and AI workloads across globally distributed, high-latency, and disconnected environments. Next Horizon Projects: Drive the architectural roadmap for visionary initiatives, including Data Centers in Space. This involves adapting the Armada stack for orbital compute modules and solving for the unique challenges of Low Earth Orbit (LEO)-including radiation-tolerant software, thermal management, and power-constrained AI processing. Strategic Partner Engineering: Work directly with elite industry partners to co-design solutions that integrate Armada's technology deeper into their global ecosystems. You will ensure our platform becomes the standard infrastructure for compute, whether terrestrial or orbital. Technical Strategy: Partner with Company Leadership to define the 3-5 year technical roadmap, identifying emerging technologies in high-density GPU orchestration and orbital data processing that align with our long-term business goals. Hard-Problem Solver: Act as the final point of escalation for complex architectural challenges involving real-time data streaming, computer vision, and network-aware workload distribution. Innovation & R&D: Lead Proof-of-Concepts for next-generation capabilities, such as in-orbit inference, adaptive learning at the edge, and secure Earth-to-space data orchestration. Mentorship: Elevate the entire engineering organization by mentoring Staff and Principal engineers, fostering a culture of high-performance engineering and architectural rigor. Required Qualifications: Core Infrastructure Mastery: Deep understanding of Data Center operations, Compute architectures (CPU/GPU/NPU), and AI Infrastructure at scale. You should understand the full stack from silicon to the orchestration layer. Experience: 15+ years of software engineering experience, with a proven track record as a Distinguished Engineer, Fellow, or equivalent senior technical leader at a major infrastructure or AI company. Distributed Systems Mastery: Expert-level knowledge of distributed systems and data storage in resource-constrained, remote, or "denied" environments. Systems Programming: Mastery of Go, C++, or Rust, with a deep understanding of how software interacts with physical compute hardware and non-terrestrial networking layers. Ecosystem Influence: Proven ability to work across company lines with partners to build "1+1=3" technical solutions that drive adoption and industry standards. Preferred Qualifications: Deep understanding of networking stacks, specifically optimization for satellite and terrestrial mesh networks. Interest or experience in orbital mechanics, radiation-tolerant software design, or space-based communication protocols. Experience building "Day 2" operations for fleets of thousands of remote, distributed devices in harsh environments. Compensation For U.S. Based candidates: To ensure fairness and transparency, the starting base salary range for this role for candidates in the U.S. are listed below, varying based on location experience, skills, and qualifications. In addition to base salary, this role will also be offered equity and subsidized benefits (details available upon request). Benefits Competitive base salary and equity Medical, dental, and vision (subsidized cost) Health savings accounts (HSA), flexible spending accounts (FSA), and dependent care FSAs (DCFSA) Retirement plan options, including 401(k) and Roth 401(k) Unlimited paid time off (PTO) 15 paid company holidays per year #LI-AB1 #LI-Hybrid Compensation$223,100-$300,000 USD You're a Great Fit if You're A go-getter with a growth mindset. You're intellectually curious, have strong business acumen, and actively seek opportunities to build relevant skills and knowledge A detail-oriented problem-solver. You can independently gather information, solve problems efficiently, and deliver results with a "get-it-done" attitude Thrive in a fast-paced environment. You're energized by an entrepreneurial spirit, capable of working quickly, and excited to contribute to a growing company A collaborative team player. You focus on business success and are motivated by team accomplishment vs personal agenda Highly organized and results-driven. Strong prioritization skills and a dedicated work ethic are essential for you Equal Opportunity Statement At Armada, we are committed to fostering a work environment where everyone is given equal opportunities to thrive. As an equal opportunity employer, we strictly prohibit discrimination or harassment based on race, color, gender, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other characteristic protected by law. This policy applies to all employment decisions, including hiring, promotions, and compensation. Our hiring is guided by qualifications, merit, and the business needs at the time. Unsolicited Resumes and Candidates Armada does not accept unsolicited resumes or candidate submissions from external agencies or recruiters. All candidates must apply directly through our careers page. Any resumes submitted by agencies without a prior signed agreement will be considered unsolicited and Armada will not be obligated to pay any fees.

Controls Tech - Seattle, WA - Large Energy & Automation Company BAS Controls Specialist ABOUT The COMPANY: Tier 1 - Large Energy & Automation Solutions Company Solutions: Commercial Buildings, Data Centers, Infrastructure, Software Engineering, etc. IDEAL CANDIDATE: Interest/Experience in BAS Programming (Script/Line or Block/Graphical) PLUS (not required) - integration experience with Tridium Niagara software RESPONSIBILITIES: Primarily will be in the field, traveling to various sites in Seattle, WA Point to Point Check-Out/Commissioning Controls installation, retrofit, and DDC programming (Block-based or Script-based) Reconfiguration, sequence modification and occasional rewriting Experienced with Third-Party integration (BACnet, Modbus, LON, etc.) Perform Preventative Maintenance Services Ability to work on a team and independently/lead some projects Work with subcontractors/delegate work Produce graphics and various custom views Configuration of control systems and integration into various control product lines Integrate systems of various controlled points to local & national software Troubleshoot BAS Controls and sometimes Access Control/IP TV devices OFFERED: Excellent Benefits: Medical, Dental, Vision, etc. Retirement Program: 401K w/ Match Vacation / Holiday Pay Mileage Reimbursement

Job DescriptionSalary: $22.00 - $33.00 Ready to Launch Your Career in Robotics? and our values at ************************* Our culture is not just about hard work--we are also about having fun, working together, and making a real difference. We are committed to creating a positive, accepting environment where everyone feels valued, respected, and empowered to grow. Job Summary: The Robotics Hardware Technicians 1 & 2 are entry to mid- level positions focused on hands-on support for robotic hardware systems and preparing individuals for future growth. A Tech 1 roleassistswith basic assembly, wiring, and installation under close supervision. It is designed for individuals building their foundation in robotics, emphasizing safety, learning, and strict adherence toestablishedwork instructions. A Tech 2 role is for a more experience and independent technician capable of executing routine assembly and maintenance tasks. This position requires the ability to read basic schematics, perform preventative maintenance, and troubleshoot common mechanical or electrical issues without constant supervision. Ideal Candidates: The ideal candidate should be comfortable with travel 60-70% of the time and have prior experience with hand tools and basic power tools. ASE/Mechanics are encouraged to apply. This role will require travel between the Seattle, WA location and the Spokane, WA location. We are seeking applicants that have the ability to also travel for short term work (up to a 90-day trip) in Germany or other locations outside of the US. Responsibilities: Assist with or assemble, wiring & installation of robotic systems to integrate, and fit-check robotic mechanical prototypes (brackets, frames, linkages, gearboxes, bearings, linear guides, end-effectors, etc.) Fabricate, modify, and finish simple mechanical parts and fixtures using simple tools such as drill press, band saw, bench grinders, taps/dies, and hand tools. Operate and perform basic daily preventative maintenance on robotic workcells and prototypes. Conduct mechanical fit, form, and function testing; measure and verify dimensions, clearances, runout, backlash, and alignment using calipers, micrometers, dial indicators, and height gauges. Install and torque fasteners to specification, apply thread-locking compounds, Build and rig test fixtures, jigs, and mock-ups for durability, impact, and life-cycle testing of mechanical components. Technicians in the level 2 role will perform more advanced responsibilities including: Perform routine preventative maintenance and repairs, including replacing worn components and verifying robot operation after service. Collect data and take measurements as support for reliability testing. Diagnose and resolve common mechanical/electrical issues (faulty sensors, wiring problems, misalignment, minor mechanical failures). Adjust and jog positions on robot axis, perform I/O checks to support production or R&D tests.Verify configurations against known values and report discrepancies. Maintain an organized, clean, and safe mechanical shop and assembly area; track and reorder mechanical consumables and spares, help track & organize HW inventory Actively participate and promote a safe work environment Collaborate with fellow technicians, management, and any contract partners to provide clear communication, timely updates, and exceptional customer service Document maintenance, repairs, and configuration changes clearly in logs or ticketing systems; provide feedback to engineers on recurring hardware issues.Tracking, documenting and managing assigned tasks and identified issues are expected. Actively support and integrate into the company culture by consistently upholding its core values, purpose, and mission Exhibits behaviors that reflect a commitment to quality, continuous improvement, and high performance to achieve client and company goals Participates in on-site meetings and training as needed Qualifications: High school diploma or equivalent Ability to pass a background check & client hire requirements Proven basic mechanical aptitude or ability Ability to use hand and power tools to assemble hardware components Must possess a friendly and collaborative demeanor to work as a part of team Ability to solve problems, adapt or recommend changes to improve outcomes Competency in following quality control and safety measures Ability to work independently, as well as be a part of a cohesive team environment Ability to follow instructions of engineer or supervisor Must possess initiative, and common sense Ability to stand / be on your feet for long periods of time and perform repetitive tasks Ability to be mobile throughout the labs and workspace or active warehouse environments Demonstrated work ethic and reliable attendance Ability to work flexible schedules and shifts to meet demands and needs of company and client deadlines Must be able to lift and carry up to 50 pounds of materials and components unassisted and without accommodation Must have ability to travel 60-70% of the time between Seattle and Spokane with additional availability to travel to areas outside of the US desirable. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Benefits: Employer pays 50% premiums of Health/ Dental/ Vision Insurance for employee and dependents Access to supplemental plans such as GAP, Disability, Accident, Whole Life, Identity Protection & more Paid leave and paid holidays 401(k) matching (up to 4%) Educational Reimbursement Plan Supportive environment & company hosted events At Emtech, we are committed to a welcoming and accepting workplace for all our employees and applicants. We base employment decisions on qualifications, merit and in accordance with federal, state and local law requirements. We encourage all employees to actively contribute to a workplace culture that honors, respects, and uplifts one another. Together, we can create an environment that is free from discrimination and harassment, where everyone feels valued and empowered to thrive.

$3,000 Sign-on Bonus to eligible new employees joining UW Medicine HARBORVIEW MEDICAL CENTER has an outstanding opportunity to hire a Control Technician. WORK SCHEDULE Monday-Friday, Days No Telework DEPARTMENT DESCRIPTION: Our vision is to create a supportive and empowering workplace for all, provide unparalleled experiences for our customers and patients, and improve the quality of life and health of the public. POSITION HIGHLIGHTS Perform skilled work in the inspection, testing, servicing, installation, and maintenance of mechanical, pneumatic, electronic, electrical, and computer controls for heating, air-conditioning, and related equipment. Work requires skills in electronic, pneumatic and mechanical control systems, and the ability to work independently with little supervision. PRIMARY JOB RESPONSIBILITIES Install, modify, and maintain HVAC and refrigeration control systems. Troubleshoot and repair fire alarms and supervisory control components. Fabricate and install temperature and humidity controls; assist with system design. Use specialized tools for repair and calibration. Manage inventory of control parts and components. Perform related duties as assigned. REQUIRED POSITION QUALIFICATIONS: Completion of a four-year approved institution course as a Control Technician Trainee; OR four years of applicable experience in installation, repair, and maintenance of electrical and pneumatic control systems. Vocational or trade school training in control mechanisms may be substituted, year-for-year, for work experience up to a maximum of two years. ABOUT HARBORVIEW MEDICAL CENTER As the region's only Level I Trauma and verified burn center, Harborview Medical Center is a comprehensive healthcare facility owned by King County and operated by UW Medicine. It is dedicated to providing specialized care for a broad spectrum of patients from throughout the Pacific Northwest, including the most vulnerable residents of King County. It provides exemplary patient care in leading-edge centers of emphasis, including emergency medicine, trauma and burn care, neurosciences, ophthalmology, vascular surgery, HIV/AIDS, rehabilitation, mental health and substance abuse care. Harborview employees are committed to the vital role the institution plays in the immediate community, as well as the entire Northwest region. Challenge. Collaboration. Compassion. ABOUT UW MEDICINE - WHERE YOUR IMPACT GOES FURTHER UW Medicine is Washington's only health system that includes a top-rated medical school and an internationally recognized research center. UW Medicine's mission is to improve the health of the public by advancing medical knowledge, providing outstanding primary and specialty care to the people of the region, and preparing tomorrow's physicians, scientists and other health professionals. All across UW Medicine, our employees collaborate to perform the highest quality work with integrity and compassion and to create a respectful, welcoming environment where every patient, family, student and colleague is valued and honored. Nearly 29,000 healthcare professionals, researchers, and educators work in the UW Medicine family of organizations that includes: Harborview Medical Center, UW Medical Center - Montlake, UW Medical Center - Northwest, Valley Medical Center, UW Medicine Primary Care, UW Physicians, UW School of Medicine, and Airlift Northwest. Become part of our team. Join our mission to make life healthier for everyone in our community Compensation, Benefits and Position Details Pay Range Minimum: $81,636.00 annual Pay Range Maximum: $108,792.00 annual Other Compensation: $3,000 Sign-on Bonus for eligible new employees Benefits: For information about benefits for this position, visit ****************************************************** Shift: First Shift (United States of America) Temporary or Regular? This is a regular position FTE (Full-Time Equivalent): 100.00% Union/Bargaining Unit: WFSE Skilled Trades About the UW Working at the University of Washington provides a unique opportunity to change lives - on our campuses, in our state and around the world. UW employees bring their boundless energy, creative problem-solving skills and dedication to building stronger minds and a healthier world. In return, they enjoy outstanding benefits, opportunities for professional growth and the chance to work in an environment known for its diversity, intellectual excitement, artistic pursuits and natural beauty. Our Commitment The University of Washington is committed to fostering an inclusive, respectful and welcoming community for all. As an equal opportunity employer, the University considers applicants for employment without regard to race, color, creed, religion, national origin, citizenship, sex, pregnancy, age, marital status, sexual orientation, gender identity or expression, genetic information, disability, or veteran status consistent with UW Executive Order No. 81. To request disability accommodation in the application process, contact the Disability Services Office at ************ or **********. Applicants considered for this position will be required to disclose if they are the subject of any substantiated findings or current investigations related to sexual misconduct at their current employment and past employment. Disclosure is required under Washington state law.

$3,000 Sign-on Bonus to eligible new employees joining UW Medicine HARBORVIEW MEDICAL CENTER has an outstanding opportunity to hire a Control Technician. WORK SCHEDULE * Monday-Friday, Days * No Telework DEPARTMENT DESCRIPTION: Our vision is to create a supportive and empowering workplace for all, provide unparalleled experiences for our customers and patients, and improve the quality of life and health of the public. POSITION HIGHLIGHTS * Perform skilled work in the inspection, testing, servicing, installation, and maintenance of mechanical, pneumatic, electronic, electrical, and computer controls for heating, air-conditioning, and related equipment. * Work requires skills in electronic, pneumatic and mechanical control systems, and the ability to work independently with little supervision. PRIMARY JOB RESPONSIBILITIES * Install, modify, and maintain HVAC and refrigeration control systems. * Troubleshoot and repair fire alarms and supervisory control components. * Fabricate and install temperature and humidity controls; assist with system design. * Use specialized tools for repair and calibration. * Manage inventory of control parts and components. * Perform related duties as assigned. REQUIRED POSITION QUALIFICATIONS: * Completion of a four-year approved institution course as a Control Technician Trainee; OR four years of applicable experience in installation, repair, and maintenance of electrical and pneumatic control systems. * Vocational or trade school training in control mechanisms may be substituted, year-for-year, for work experience up to a maximum of two years. ABOUT HARBORVIEW MEDICAL CENTER As the region's only Level I Trauma and verified burn center, Harborview Medical Center is a comprehensive healthcare facility owned by King County and operated by UW Medicine. It is dedicated to providing specialized care for a broad spectrum of patients from throughout the Pacific Northwest, including the most vulnerable residents of King County. It provides exemplary patient care in leading-edge centers of emphasis, including emergency medicine, trauma and burn care, neurosciences, ophthalmology, vascular surgery, HIV/AIDS, rehabilitation, mental health and substance abuse care. Harborview employees are committed to the vital role the institution plays in the immediate community, as well as the entire Northwest region. Challenge. Collaboration. Compassion. ABOUT UW MEDICINE - WHERE YOUR IMPACT GOES FURTHER UW Medicine is Washington's only health system that includes a top-rated medical school and an internationally recognized research center. UW Medicine's mission is to improve the health of the public by advancing medical knowledge, providing outstanding primary and specialty care to the people of the region, and preparing tomorrow's physicians, scientists and other health professionals. All across UW Medicine, our employees collaborate to perform the highest quality work with integrity and compassion and to create a respectful, welcoming environment where every patient, family, student and colleague is valued and honored. Nearly 29,000 healthcare professionals, researchers, and educators work in the UW Medicine family of organizations that includes: Harborview Medical Center, UW Medical Center - Montlake, UW Medical Center - Northwest, Valley Medical Center, UW Medicine Primary Care, UW Physicians, UW School of Medicine, and Airlift Northwest. Become part of our team. Join our mission to make life healthier for everyone in our community Compensation, Benefits and Position Details Pay Range Minimum: $81,636.00 annual Pay Range Maximum: $108,792.00 annual Other Compensation: $3,000 Sign-on Bonus for eligible new employees Benefits: For information about benefits for this position, visit ****************************************************** Shift: First Shift (United States of America) Temporary or Regular? This is a regular position FTE (Full-Time Equivalent): 100.00% Union/Bargaining Unit: WFSE Skilled Trades About the UW Working at the University of Washington provides a unique opportunity to change lives - on our campuses, in our state and around the world. UW employees bring their boundless energy, creative problem-solving skills and dedication to building stronger minds and a healthier world. In return, they enjoy outstanding benefits, opportunities for professional growth and the chance to work in an environment known for its diversity, intellectual excitement, artistic pursuits and natural beauty. Our Commitment The University of Washington is committed to fostering an inclusive, respectful and welcoming community for all. As an equal opportunity employer, the University considers applicants for employment without regard to race, color, creed, religion, national origin, citizenship, sex, pregnancy, age, marital status, sexual orientation, gender identity or expression, genetic information, disability, or veteran status consistent with UW Executive Order No. 81. To request disability accommodation in the application process, contact the Disability Services Office at ************ or **********. Applicants considered for this position will be required to disclose if they are the subject of any substantiated findings or current investigations related to sexual misconduct at their current employment and past employment. Disclosure is required under Washington state law.