Controls technician jobs in Springfield, OR - 455 jobs

Job Title: Assembler/Production Technician Pay Range: $21.45 - 25.30/Hr. On W2 (Depending on Experience/Interview) Duration: Contract Role (Possible Extension or Temp to Hire for Right Candidate) Schedule: CAN SELECT A SHIFT TO WORK FOR Days Shift (Sunday-Tuesday every other Wednesday 5am-5:30 pm) Days Shift (Thursday-Saturday every other Wednesday 5am-5:30pm) Night shift (Sunday-Tuesday every other Saturday 5pm-5:30am) Night shift (Wednesday-Friday every other Saturday 5pm-5:30am) Job Description: Navigate computer-based work instructions to install parts & hardware using hand tools & fixtures if needed; on wafer fabrication equipment (WFE) in a Lean manufacturing clean-room environment. Effectively use hand tools, torque wrenches, equipment & fixtures to assemble WFE Read & navigate work instructions & schematics Work in teams to ensure workflow & production schedule is maintained Provide flexibility & responsiveness for changing priorities including rework requirements & pilot build projects Ensures the correct parts were delivered & performs visual inspection of components prior to installation Assists with audits through visual inspection & verifying checklists Closes assigned tasks by verifying work was completed, verify Cell Fusion was completed, & signing off & giving a description of what was done Installs parts & hardware correctly by following Cell Fusion instructions & using hand tools & fixtures if needed; verifies Cell Fusion completion Consistently exhibit behaviors that aligns with core values Complete all required safety training Follow safe work practices by lifting no more than 35 pounds, using ergonomic pads, stretching when needed, etc. Understands continuous improvement Attention to detail Flexible, able to easily adapt to change Proactive and takes initiative Able to utilize computer-based data systems and applications Able to navigate and uses Microsoft Office software -(e.g. Microsoft Excel, Word, Outlook, Teams) “Russell Tobin offers eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors.”

About Analog Devices Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at ************** and on LinkedIn and Twitter (X). Overview: We are seeking a skilled Mechatronics Technician to join our dynamic team. The ideal candidate will be proficient in designing, building, and maintaining machines and systems. You will apply your skills in mechanical engineering, electronics, computer programming, control engineering, and systems design to ensure system stability and efficiency, contributing to the growth and overall success of our business. Responsibilities: * Design, develop, maintain, and manage high-technology engineering systems for the automation of semiconductor FAB. * Apply mechatronic or automated solutions to the transfer of materials, components, or finished goods. * Create mechanical design documents for parts, assemblies, or finished products. * Maintain technical project files. * Conduct studies to determine the feasibility, costs, or performance benefits of new mechatronic equipment. * Research, select, or apply sensors, communication technologies, or control devices for motion control, position sensing, pressure sensing, or electronic communication. * Identify and select materials appropriate for mechatronic system designs. * Install and maintain mechanical control systems. * Troubleshoot equipment malfunctions. Preferred Qualifications: * Proven experience as a Mechatronics Technician or similar role. * Familiarity with mechanical, electrical, and computer systems. * Excellent manual dexterity. * Familiar with PLCs, IPCs and other control systems * Exposure to C++, C, Python, Java etc. * Ability to read and comprehend technical documentation. * Excellent problem-solving and troubleshooting skills. * Knowledge of safety protocols and willingness to enforce these. * Strong attention to detail. * Experience with semiconductor process equipment * Associate degree in mechatronics, automation engineering, or a related field, or US Military Veteran with applicable technical experience Location: Beaverton, Oregon Work Schedule: Compressed workweek (3 12-hr shifts one week, 4 12-hr shifts alternate week) , hourly employee For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: Experienced Required Travel: No Shift Type: COP (Continuous Opns.) The expected wage range for a new hire into this position is $28 to $35. * Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors. * This position qualifies for a discretionary performance-based bonus which is based on personal and company factors. * This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.

Title: Nano Probing Tech Pay Rate: $20/hr + $2 shift differential Hours: Wednesday - Friday alternating Saturday 630 PM - 7 AM Type: Assignment with Full Benefits Package About Our Client Our client, a company creating world-changing technology, has big ambitions and a growing sense of urgency to address challenges no one can tackle alone. Their mission is to drive innovation that makes the world safer, build healthy and vibrant communities, and increases productivity. About the Role What You'll Be Doing: Utilize OLAF task management software to identify samples requiring probing. Physically retrieve and organize samples from designated storage cabinets. Operate Scanning Electron Microscope (SEM) to load samples, locate probing sites, and conduct analysis. Use CAD software to align physical samples with corresponding CAD layouts. Analyze signal transmission across chip layers, tracing signals in CAD to identify drivers and receivers. Perform precise probe manipulation using a joystick controller to establish contact and collect accurate data. Compile, document, and communicate measurement results through detailed reports. Apply fundamental knowledge of MOSFET operation to analysis; advanced understanding of semiconductor physics and processing technology is beneficial. About You Required Qualifications: Bachelor of Science in the STEM field plus 4 years of experience working in a similar environment Hands-on analytical tool experience including SEM, Transmission Electron Microscopy and/or beam based tools. Basic knowledge of Semiconductors Computer literacy Use internal task management system to identify samples ready for probing Operate Scanning Electron Microscopes (SEM) for failure analysis. Utilizing CAD software to align physical samples with layouts. Analyzing signal transmission and trace signals in CAD. Performing precise probe manipulations for data collection. Basic knowledge of MOSFET operation and semiconductor physics. Ability to perform electrical measurements and has a basic understanding of devices and circuits Preferred Qualifications: Metrology data processing and statistical analysis Knowledge and understanding of device physics and circuits Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visas. About Cinder Cinder is a people-first staffing and recruiting company committed to creating workplaces where employees feel valued, supported, and engaged. Our mission is to leverage our power as a recruiting and consulting company to build workplaces where people thrive. Backed by our ISO 9001 certification, we deliver high-quality staffing solutions, and our clients have rated us over 100% for multiple quarters. Join us and be part of a team that makes a real impact!

Control Staff Technician 1-2 This position serves to work and collaborate with other CSNW (a subsidiary of RH2) team members in the planning, designing, software development, and commissioning of control systems for water and wastewater facility projects and industrial manufacturing. A person in this position thrives in a collaborative team environment that requires critical thinking to solve complex problems and providing exceptional client service while managing a diverse workload and creating technically accurate deliverables. With your skills you will: Develop software for programmable logic controllers (PLC's), touch screen operator interface devices (OI's), and Human Machine Interface (HMI) computer systems. Provide on-site start-up and commissioning, as well as ongoing support of Supervisory Control and Data Acquisition (SCADA) control systems. Develop Operations and Maintenance (O&M) documentation and conduct O&M training sessions. Conduct inspections of control system installations. Perform control system and field instrumentation testing, troubleshooting, and startup. Perform regular maintenance and assist with repairs to existing client systems. What you'll bring: Associates degree or technical certificate in electrical or mechanical engineering technology, industrial automation, or equivalent combination of education and experience/training. 0-2 years related controls technician experience, consulting environment preferred. 0-2 years in SCADA/control system experience including: PLC/ operator interface software development experience (Preferred: Allen Bradley, Siemens, Opto22) SCADA HMI application software development experience (Preferred: Wonderware/AVEVA, FactoryTalk View, Ignition) Understanding of computer networks, including internet/ intranet LAN/WAN networking skills Landline/ wireless communications experience a plus Municipal water/ wastewater experience, preferred Experience with handheld digital meters Strong analytical and problem-solving skills Excellent verbal and written communication skills Ability to work collaboratively with teams in multiple offices Computer Skills: To perform this job successfully, an individual should have knowledge of or willing to learn: Microsoft Office Suite including Outlook, Excel, and Word preferred AutoCAD and AutoCAD 3D preferred PLC/ operator interface software development SCADA HMI application software Basic programming for Python, C, C#, Java, and/or Rust preferred Physical Requirements: This position is primarily performed in an office/business setting with some travel to construction or client site weekly. To successfully perform this job, an individual should have the ability, with or without a reasonable accommodation, to: Sit or stand at a desk for several hours to perform work in an office setting. Ability to Lift 40 lbs Travel between CSNW offices and/or job sites Walk around a construction job site Compensation counts: CSNW has an excellent multi-component compensation package built to recognize and financially reward our employees' contributions throughout their career with the company. Individual base compensation will vary within the following range based on skills, qualifications, and experience as they relate to the requirements for this position. CSNW values our employees' work/life balance and compensates for overtime at 1.5 times the base rate for hours exceeding 40 regular hours in a work week. Control Technician 1-2: $30.00-$35.00/hour Benefits you'll enjoy: Health & Wellbeing - 100% paid insurance premiums for medical, dental, vision, life, AD&D, disability, and an employee assistance program (EAP) employee coverage. Two buy-up medical plans are available, and low-cost partner and dependent coverage offered. Rest & Recover - Nine (9) paid holidays. Competitive Paid Time Off (PTO) accrual benefit. Savings Plans - 401(k) retirement plan with pre-tax and after-tax contribution options, generous employer 401(k) match, employer profit sharing contribution, employer Employee Stock Ownership Plan (ESOP) contribution, HSA with an annual employer contribution, FSA, and dependent care FSA available. Team Building & Community - Office social events, all-company retreat, and paid volunteer hours to encourage local community involvement and partnerships. Career Recognition & Development - Service anniversary bonuses and/or additional PTO on milestone anniversaries, incentives for professional licensure, defined career progression for every discipline, and mentorship from experienced professionals. We help advance careers because we care about you. CSNW is an equal opportunity employer of all qualified individuals, including minorities, women, veterans, individuals with disabilities, and regardless of race, color, religion, sex, national origin, sexual orientation, gender identity, or any other characteristic protected by law. CSNW will consider qualified applicants with criminal histories for employment in a manner consistent with all federal, state, and local ordinances. Applicants requiring special assistance and/or people with disabilities can contact CSNW's Human Resources.

Perform testing, check-out, and troubleshooting using schematics, diagrams, descriptions, layouts, or defined plans. Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems. Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures. Conduct operational test and fault isolation on systems and equipment, help in determining methods or actions to remedy malfunctions. Support the design, construction, test, and check-out of test equipment. Use test and diagnostic equipment, including test programs, oscilloscopes, signal generators and specialized test apparatus. Collaborates with development engineers conducting engineering tests to collect design data or support in research efforts. 2-4 years of related work experience. Firsthand experience with installation, maintenance, repair, testing, or troubleshooting of equipment or electronics. Effective communication skills, written and verbal, in English. Proficient in utilizing computer-based data systems, applications, and Microsoft Office software. Ability to work a shift schedule. Associates degree, Technical Certificate, Diploma or higher in a technical field. Experience in electrical engineering, mechanical engineering, bioengineering, metrology, lab operations, or related areas. Experience in semiconductor experience is a plus.

Taurus Power and Controls - a Pacific Northern Environmental LLC Company, is seeking an Automation Technician who thrives in a fast-paced, team environment and has the ability to provide exceptional service to our company, clients, and employees. Pacific Northern Environmental, LLC consists of five divisions include Advanced Electrical Technologies (AET), Taurus Power and Controls (Taurus), Cowlitz Clean Sweep (CCS), Pacific Northern Environmental Construction (PNEC), and WasteXpress Environmental (WXE). Together, we specialize in commercial and petroleum construction, industrial and commercial electrical, industrial cleaning, and hazardous waste disposal. PNE LLC is a mult-state organization with operating offices in Washington, Oregon, Idaho, and Hawaii. In addition, we have multiple job sites across the US. Since 1985, Taurus has been designing control systems, automating tasks, and fabricating control panels for industrial, municipal, and commercial customers-on time and on budget. Taurus is a NETA Accredited Company that offers full-service, third party, independent testing for all electrically powered systems and equipment. Being a 24/7 field service company remains at the core of what we do. We have expertise in a wide array of systems and industries, whether it's servicing projects we developed, or systems built by others. The AutomationTechnician is responsible for having the ability and knowledge to preform start-up and testing services on Instrumentation, VFD's, Emergency Lighting Inverters, PLC's and other industrial control equipment Education and Experience Qualifications Previous employment involving troubleshooting of industrial devices required. AAS Degree in Instrumentation, mechatronics, industrial electronics, industrial controls or 1+ years experience in any of the previously mentioned fields required. Understanding hazards around electrical circuits Customer relation and communication skills, report writing, self-starter mentality Familiarity and experience working on any of the following equipment: VFD's PLC's DC Drives Instrumentation (Flow sensors/meters, Level sensors/meters, etc…) UPS's, battery systems, lighting inverters Duties and Responsibilities The Automation Technician possessing the education and experience listed above performs the following: Ability and knowledge to Preform Start-up and testing services on Instrumentation, VFD's, Emergency Lighting Inverters, PLC's and other industrial control equipment Ability to identify problems and troubleshoot failure in the above mentioned items Ability to work independently when required Flexibility in working hours required: work is typically 8am - 5pm during the week but occasionally after hours and weekend work is required by our customers. Overtime hours available. Have reliable transportation to travel to and from office or a customers site Flexibility to travel to out of area jobs for up to a two-week duration. Most of our work is local but occasionally work takes place at a customers site within Oregon, Washington, or Idaho. Other duties as assigned. Working Conditions and Physical Requirements The candidate must possess and be adaptable to the following physical abilities and working conditions: Move about the jobsite as needed. Move work related equipment up to 50lbs. Remain in a stationary position for long periods of time. Operate various technological devices, including but not limited to a computer. Occasionally ascend/descend ladders and/or stairs. Employee Benefit Program Pacific Northern Environmental, LLC presently provides coverage for: Medical, Dental & Vision options with low premiums for employees and eligible dependents Life AD&D - Voluntary and Company paid. Specialty RX programs. Group AFLAC options - Hospital, Critical, Accident and short-term Disability Plans Pre-Tax Flexible Savings Account (FSA) Pre-Tax Dependent Care Savings Account (DCSA) Telehealth by Teladoc. 401(k) with discretionary annual company matching contributions. Employee Assistance Program (EAP) Paid Trainings and Certifications Paid Time Off Paid Holiday for qualifying employees Up to $2,000 per year profit sharing for qualifying employees Annual company events Safety Incentives Please apply directly - ************************************** ***Not open to outside recruiters*** Pacific Northern Environmental, LLC is an Equal Opportunity Employer. Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. This job description is a general description of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees of Pacific Northern Environmental, LLC (PNE, LLC) are expected to perform tasks as assigned by PNE supervisory/management personnel, regardless of job title or routine job duties. This position has been determined as “safety sensitive,” as defined as a position wherein an accident could cause human life, serious bodily injury, or significant property or environmental damage and is therefore subject to pre-employment drug screening including that of THC. We are a Drug and Alcohol-Free Workplace. All new hires are subject to testing in accordance with local, federal, and state guidelines. #urgentlyhiring

Job Description If you thrive in a team-oriented workplace that challenges your skills, to drive your career development, embraces diversity and rewards innovation, with competitive pay and great employee programs, join the Ainsworth, a subsidiary of GDI, team today! Job Summary: As a BMS Service Technician, you will perform duties that range from general troubleshooting on customer systems to support on BMS / low-voltage projects. You will be part of a team while also maintaining an independent role with a focus on ownership and organization throughout the entire service order process. Key Responsibilities: Manage your personal WIP (Work in Progress) Service Orders from generation through completion. Be a customer advocate while on your field service visits Read and interpret Control, Mechanical, Electrical drawings and circuit diagrams as needed Troubleshoot and diagnose BMS systems and networks to automate building systems. Program and commission BMS systems. Replace and/or repair building automation control equipment and devices. Perform other duties as assigned Qualifications: 5-6 years of experience preferred but not required. LEB preferred but not required Experience in the building controls automation industry preferred but not required. Experience in the light commercial / Residential HVAC industry preferred but not required. Tech-Savvy with computers. Strong attention to detail. Excellent command of the English language, both written and oral. Proficient in Microsoft Office. Commercial/construction service experience a plus. Class C driver's license and clean driver's record. While we appreciate all applications we receive, we advise that only candidates under consideration will be contacted. Ainsworth, a subsidiary of GDI, is committed to building a diverse and inclusive workplace. Qualified designated group members are encouraged to apply as any reasonable accommodation of qualifications will be considered as per our Accommodation Policy, available upon request. Ainsworth, a subsidiary of GDI, is an integrated multi-trade company, offering end-to-end services and solutions for all asset maintenance and refurbishment requirements of our customers. We are continually striving to create better and more advanced products as well as provide the highest quality service. We are rapidly growing and need talented professionals to help drive our vision at becoming the best multi-trade company in the country! Join us…. Make a difference. #LI-Onsite

Controls Tech - Portland, OR - Large Energy & Automation Company BAS Controls Specialist ABOUT The COMPANY: Tier 1 - Large Energy & Automation Solutions Company Solutions: Commercial Buildings, Data Centers, Infrastructure, Software Engineering, etc. IDEAL CANDIDATE: Interest/Experience in BAS Programming (Script/Line or Block/Graphical) PLUS (not required) - integration experience with Tridium Niagara software RESPONSIBILITIES: Primarily will be in the field, traveling to various sites in Portland, OR Point to Point Check-Out/Commissioning Controls installation, retrofit, and DDC programming (Block-based or Script-based) Reconfiguration, sequence modification and occasional rewriting Experienced with Third-Party integration (BACnet, Modbus, LON, etc.) Perform Preventative Maintenance Services Ability to work on a team and independently/lead some projects Work with subcontractors/delegate work Produce graphics and various custom views Configuration of control systems and integration into various control product lines Integrate systems of various controlled points to local & national software Troubleshoot BAS Controls and sometimes Access Control/IP TV devices OFFERED: Excellent Benefits: Medical, Dental, Vision, etc. Retirement Program: 401K w/ Match Vacation / Holiday Pay Mileage Reimbursement

Job Description We are seeking an experienced Controls Technician to play a vital role at our Junction City location. This is an excellent opportunity to grow your career in a dynamic and supportive environment. We offer a competitive wage and great benefits. Position Summary We are seeking a Controls Technician to support, maintain, and improve our plant's automation and electrical systems. This role provides hands-on troubleshooting, preventive maintenance, and control system improvements for production and utility equipment. The ideal candidate has a strong background in industrial automation, mechatronics, and thrives in a fast-paced food manufacturing environment. Key Responsibilities Configure, troubleshoot, and support variety of PLCs, HMIs, VFDs, servo drives, instrumentation, and industrial network devices. Perform preventive maintenance, corrective actions, and root-cause analysis on production equipment, automation systems, robotic cells, building automation systems (BAS), and plant utility equipment. Assist with installation, commissioning, and upgrades of production equipment. Collaborate with maintenance and engineering teams to improve equipment reliability and safety. Support and maintain plant SCADA, recipe control, and data collection systems. Create control narratives and machine procedures, maintain accurate schematics and other technical documentation, and keep records of work performed. Qualifications Associate degree or certification in Electrical/Controls or related technical field. Combination of education and/or related experience considered in lieu of degree. Experience working with Allen-Bradley hardware and software. IDEs such as Logix Designer Suite and FactoryTalk View preferred. Familiarity with IEC 61131-3 languages in other environments also acceptable. 2+ years of experience as an Industrial Electrician, Controls Technician, or similar role. Strong troubleshooting skills and ability to work independently and in a te

Looking for a rewarding career with a company that values people, growth, sustainability, and teamwork? Join our Duraflake team as an Automation and Process Control Specialist! Are you passionate about solving complex problems related to instrumentation and process control equipment? Do you have a knack for developing and commissioning technical systems? If so, we have an exciting opportunity for you! What we are looking for: 2- or 4-year degree from a technical school in Electrical Engineering preferred. 5 years' experience in the maintenance of an automated manufacturing environment. Strong knowledge of PLCs, HMIs, and electrical/mechanical systems. Proficiency in AutoCAD and Microsoft Office (Word, Excel, Access, PowerPoint). SAP and SCADA experience is a plus. Excellent communication, leadership, and teamwork skills. What we offer: An attractive compensation package with either bonus or profit/gain sharing eligibility for every role Health plans with options that meet your needs, including a wellness program, gym reimbursement, and additional benefits such as pet insurance, legal insurance, employer-paid and voluntary life insurance, and more Paid maternity and paternity leave, a competitive vacation package, and company and floating holidays designed to support your work-life balance Retirement planning options, including generous employer contributions Opportunities to learn and develop, including a tuition reimbursement program In this role, you would: Develop and design mid-level projects, including Sub-PLC upgrades and initiatives. Lead the design of automation and process control systems, including PCs, PLCs, AC/DC drives, and controllers. Maintain and support process communications infrastructure (DeviceNet, ControlNet, Ethernet, etc.). Perform modifications of PLC automation programs and Human Machine Interface (HMI) applications to achieve stability and optimization goals. Provide timely resolution and troubleshooting of technical issues related to instrumentation and automation control systems. Promote safe work practices and teamwork, actively participating in our safety program. About Us: At ARAUCO, we're more than a global leader in sustainable wood products-we're a team driven by innovation, environmental stewardship, and strong core values. Committed to responsible forestry and quality craftsmanship, we create products that shape industries and protect the planet. Sustainability is central to everything we do-from responsible forestry to reducing environmental impact, we are dedicated to preserving natural resources for future generations. Grow your career with purpose and help us shape a better future-one product, one idea, and one team at a time. ------ Arauco is committed to creating an inclusive culture across the organization. Arauco is an equal opportunity employer to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. Additionally, we demonstrate that commitment by preventing and removing barriers for persons with disabilities. Where it is not possible to remove barriers, Arauco will make efforts to accommodate persons with disabilities in a timely, effective and suitable manner. If you require any accommodations during the recruitment process, please let us know.

Benefits: Competitive Wages Tools Provided Uniforms Provided Company Vehicle Paid Training Flexibility Career Advancement Opportunities Growing Industry 401(k) 401(k) matching Paid time off Job Title: Access Control Technician Reports To: General Manager or Franchise Owner Key Areas of Responsibility: The Access Control Technician position is an integral part of FlyLock Security Solutions - Portland and is key to the growth of the company. All Access Control Technicians must have the ability to work well in a high-paced working environment. The individual must work well as part of the team and independently from the FlyLock owner. The Access Control Technician position is a hands-on technical position geared toward an individual who has a technical mindset. Ideal candidates will have locksmithing knowledge and demonstrate the ability to learn new technical methods and techniques. Requirements/Responsibilities Minimum of 2 years experience in technical hands-on field experience in security solutions, access control, door hardware, and other skilled trades. Inspects, installs, and services all basic and complex commercial and residential access and video systems. Performs advanced, complex troubleshooting and repair functions for commercial and residential access and video systems such as programming; cleaning detectors; testing controls and peripheral devices; mounting, replacing, and testing equipment according to specifications; running cable, etc. Instructs customers in access and video systems operation by recommending ways to use additional features and capabilities of system installations. Respond to customer questions and requests. Recommend corrective services to adjust customer complaints. Diffuses difficult and complex customer issues. Builds and maintains working relations with the sales staff. Defines the scope of add-ons and change orders, seeks customer approval, and writes up paperwork. Performs site visits with sales consultants for existing or potential clients. Takes responsibility for the project from first walk-through to final sign-off and hand-offs to service. Maintains accurate records of all inspections/service calls and troubleshooting as required including documentation and updating paperwork. Acts as onsite project lead to meet project timelines and goals and oversees lead technicians, technicians, apprentices, and subcontractors. Other duties as required by management. Nice to Have: Experience with systems mentioned below is useful but not all required. Access Control - Avigilon ACM, Linear Emerge3 &50P, S2, Lenel Kantech, Honeywell WinPak, DSX, Maxxess Access, AMAG Symetry, Keyscan System7, Brivo, OpenPath Credentials and Biometrics - HID, Aptiq, AWID, Suprema, BioConnect, MyIris, IrisID, LG Iris, Schlage, L1 Indenity, NEDAP, TRES443/900 Long Range Readers, Object Detection CCTV - Exacq, Avigilon , Axis, Arecont, ACTi, Pelco, HikVision, Dahua, LPR Lock Hardware HES, Rutherford, Schlage, Allegion Brands, Assa Brands, SDC Controls, Lock Retrofit Kits, Magnetic Locks, Electrified Trim Sets, Electrified Crash Bars, Electrified Strikes, Electrified Handsets, Schlage NDE Networks - Netgear, Dlink , Ubiquit, Fiber Optics, SPF Modules, Fiber Optic Testing and Termination Wireless- Ubiquiti, Firetide, Fluid Mesh Physical Requirements: Must be able to fluently understand, speak, and write English. Ability to push, pull, and lift at least 50 lbs. Ability to kneel, crouch and stoop. Ability to reach above and below the shoulders. Ability to use hands and fingers to grasp, twist, and pull. Ability to climb a ladder and work above ground. Withstand external weather conditions year-round. The Flying Locksmiths and FlyLock Security Solutions franchise network of security specialists provide access control systems, commercial locksmith services and door security solutions nationwide. We blend traditional values with the latest advancements in technology to ensure our life safety and security solutions meet the precise needs of clients. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchise. All inquiries about employment at this franchise should be made directly to the franchise location, and not to FlyLock Security Solutions Corporate.

ABOUT THE JOB The primary functions include performing routine or repetitive application of standard policies and processes within Lincotek Medical. Ensures appropriate documentation and records are available and accessible to the production floor, as needed by production. Basic understanding of inspection tools, CNC machining and finishing processes. MAIN RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform each of the Major Responsibilities, including the following: Coordinates and updates the company training program. Requires the ability to learn and meet established department specific work instructions and procedures. Ensures compliance, timeliness, and accuracy of routing and supporting documentation to customer specification. Authorized to correct as necessary. Maintains the documentation files in compliance with ISO 13485: 2016 and 21 CFR Part 820. Creates, maintains and improves controls on all documentation masters, device history records and files. Other duties as assigned. EDUCATION AND/OR EXPERIENCE: High School diploma, or equivalent required. Proven capability and demonstrated record of performance in a technician equivalent role. Prefer less than one year of experience. SKILLS: LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules. Ability to write routine correspondence. MATHEMATICAL SKILLS Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. WORK ENVIRONMENT: This job operates in both an office environment and a manufacturing environment. The role routinely uses standard office equipment, such as computes, phones, photocopiers, filing cabinets and fax machines. The individual will be required to adhere to safety policies and procedures on the manufacturing floor. PHYSICAL DEMAND: While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk, use hands to finger, handle or feel and reach with hands and arms. The employee is occasionally required to sit, climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 lbs and occasionally lift and or move up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Lincotek Medical provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law .

Since 1988, Kerr Contractors has been shaping the landscape of the Pacific Northwest as a premier heavy civil contractor. We've earned our reputation as one of the region's most technically advanced earth-moving, road-building, and underground utilities contractors. At Kerr, we don't just move dirt and build roads - we build lasting relationships and communities. What You'll Do * Making site visits to ensure environmental compliance at active construction sites * Using and maintaining specialized erosion control measuring tools and equipment * Working outdoors in various weather conditions * Working in an on-site office trailer to manage documentation and reports * Monitoring and tracking dump truck and haul truck activities, including where and how far they travel/what they haul and dump, etc. What You'll Need: * Valid driver's license and acceptable driving record * Must pass pre-employment drug screen and background check * Proficiency in Microsoft Office applications, particularly Excel and Word * Strong attention to detail and organizational skills * Ability to safely lift/carry up to 50 pounds occasionally with or without reasonable accommodation * Ability to work independently work as well as strong communication with team members Compensation & Benefits: * Salary: $20.00 - $23.00 per hour * Comprehensive benefits including: * Medical & dental coverage (company-paid premiums after waiting period) * Dependent coverage options * Vision and life insurance * 401(k) with up to 4% employer match * Paid vacation and holidays * Employee Assistance Program (EAP) * Team building events and community involvement opportunities Equal Opportunity Statement: As an equal opportunity employer Kerr Contractors will hire without consideration to race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status, or disability. Kerr Contractors also enforces a zero-tolerance drug policy. Accessibility: If you need an accommodation as part of the employment process, don't hesitate to get in touch with Human Resources at ******************************

Your Job Process Control Technologist is collaborative role. Responsible for supporting the daily operational needs of the process control systems and contributing to a culture of safety and continuous improvement at the Toledo Mill. An ideal candidate for this role will be self-motivated, reliable and maintain a positive attitude while respecting others and possessing a strong work ethic. Our Team Nestled just a few miles inland from the Oregon Coast, Toledo offers the perfect blend of small-town charm and easy access to outdoor adventure. Surrounded by lush forests, rivers, and rolling hills, it's a haven for hiking, kayaking, fishing, and wildlife watching. Just minutes from Newport, residents can enjoy beaches, coastal trails, and fresh seafood while avoiding the heavier tourist crowds. Whether you love exploring nature, relaxing by the water, or being part of a close-knit coastal community, Toledo delivers the best of Oregon's natural beauty and coastal lifestyle. What You Will Do Work with operations, maintenance, and process control engineers to troubleshoot for root cause, address problems identified and implement sustainable solutions. Assisting in the development and implementation of reliability centered maintenance strategies for process control equipment. Collaborate with electricians to ensure that existing drawings are up to date in field locations and our records. Provide one-on-one support for electricians with troubleshooting strategies, knowledge sharing, and training. Assist with after-hours and weekend mill coverage Willing and able to train others as needed Who You Are (Basic Qualifications) Experience in maintaining and troubleshooting PLCs (preferably Allen-Bradley or Modicon) Experience in Process instrumentation Experience reading electrical drawings, schematics, and equipment layouts Hands-on E&I experience Must have legal authorization to work permanently in the United States for any employer without requiring a visa transfer or visa sponsorship What Will Put You Ahead Experience programming Allen-Bradley or Modicon PLCs Experience programming Honeywell DCS or MOD300 DCS At least 6 months working within a process control group Experience troubleshooting Honeywell Experion DCS or MOD300 Hardware maintenance and troubleshooting Allen-Bradley, ABB 3+ years of experience working in a manufacturing or industrial environment Experience developing and maintaining an asset strategy and reliability program for instrumentation For this role, we anticipate paying $52 - $53 per hour. At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here . Who We Are As a Koch company and a leading manufacturer of bath tissue, paper towels, paper-based packaging, cellulose, specialty fibers, building products and much more, Georgia-Pacific works to meet evolving needs of customers worldwide with quality products. In addition to the products we make, we operate one of the largest recycling businesses. Our more than 30,000 employees in over 150 locations are empowered to innovate every day -to make everyday products even better. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, some offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please click here for additional information. (For Illinois E-Verify information click here , aquí , or tu ). #LI-GM1 #LI-Onsite

Job DescriptionSalary: DOE About Us: Were a growing commercial electrical subcontractor known for delivering high-quality work across a variety of projectsfrom large-scale commercial projects to complex tenant improvements. Our team is made up of driven professionals who take pride in what they do, and were looking for a Controller to help take our financial operations to the next level. Position Summary: As Controller, you will be responsible for overseeing all financial aspects of the companys operations. This includes managing day-to-day accounting functions, job costing, cash flow, budgeting, and reporting. Youll work closely with leadership to provide financial insight that supports smart, strategic decision-making and helps drive continued growth. Key Responsibilities: Lead and manage all accounting operations, including AR, AP, payroll, GL, and bank reconciliations Develop and maintain accurate job costing and work-in-progress (WIP) schedules Prepare monthly, quarterly, and annual financial statements and reports Monitor cash flow, manage budgets, and forecast financial performance Ensure compliance with GAAP and applicable tax regulations Oversee audits, tax preparation, and financial compliance activities Evaluate and improve internal controls, accounting procedures, and systems Collaborate with project managers to analyze job performance and profitability Provide strategic financial input to support business decisions Qualifications: 5+ years of progressive accounting/finance experience; construction industry experience strongly preferred Strong understanding of job costing, WIP, and percent-complete accounting Proficiency in accounting software (e.g., QuickBooks) Excellent analytical, organizational, and communication skills Ability to work independently and manage a small accounting team What We Offer: Competitive salary + performance-based bonuses Health, dental, and vision insurance Retirement plan with company match Paid time off and holidays

Role: Slalom Flex (Project Based) - Technical Engineer (Pega) Who You'll Work With Our teams help organizations of all kinds redefine what's possible, give shape to the future - and get there. We focus on high-impact projects, meeting our clients where they are to uncover business needs and deliver results. Our teams go beyond the expected to help clients move confidently through ambiguity and risk and drive more transformative outcomes. The Technical Engineer with strong Pega expertise will focus on designing, building, and optimizing enterprise workflows on the Pega Platform, ensuring high performance, security, and scalability. What You'll Do * Design and Build: Develop case types, flows, UI rules, and data models on Pega Platform (v7.x / v8.x). * Integrations: Implement and troubleshoot integrations (REST, SOAP, APIs, MQ, databases). * Performance & Security: Conduct performance tuning and enforce security/access control best practices. * Collaboration: Work within Agile/Scrum teams, partnering with business analysts, QA, and DevOps. * Consulting Excellence: Translate business requirements into technical solutions and provide clear recommendations to stakeholders. What You'll Bring * Strong expertise in Pega Platform (v7.x / v8.x). * Proven experience as a Technical or Lead Pega Architect on large-scale implementations. * Deep understanding of: * Case Management, Flows, and UI rules * Data modeling and decisioning * Pega performance tuning and optimization * Security and access control * Hands-on experience with integrations (REST, SOAP, APIs, MQ, databases). * Experience with Agile/Scrum methodologies. * Experience with Pega migrations and upgrades. * Pega certifications such as: * Pega Certified Lead System Architect (CLSA) * Pega Certified Senior System Architect (CSSA) * Familiarity with cloud platforms (AWS, Azure, or GCP). * Exposure to DevOps tools and CI/CD pipelines. * Experience in regulated industries (Financial Services, Healthcare, Insurance). * Consulting experience. About Us Slalom is a fiercely human business and technology consulting company that leads with outcomes to bring more value, in all ways, always. From strategy through delivery, our agile teams across 52 offices in 12 countries collaborate with clients to bring powerful customer experiences, innovative ways of working, and new products and services to life. We are trusted by leaders across the Global 1000, many successful enterprise and mid-market companies, and 500+ public sector organizations to improve operations, drive growth, and create value. At Slalom, we believe that together, we can move faster, dream bigger, and build better tomorrows for all. Compensation and Benefits Slalom prides itself on helping team members thrive in their work and life. As a result, Slalom is proud to invest in benefits that include meaningful time off and paid holidays, parental leave, 401(k) with a match, a range of choices for highly subsidized health, dental, & vision coverage, adoption and fertility assistance, and short/long-term disability. We also offer yearly $350 reimbursement account for any well-being-related expenses, as well as discounted home, auto, and pet insurance. Slalom is committed to fair and equitable compensation practices. For this position, the hourly pay range is $65 to $90/HR depending on experience. Actual compensation will depend upon an individual's skills, experience, qualifications, location, and other relevant factors. The hourly pay range is subject to change and may be modified at any time. EEO and Accommodations Slalom is an equal-opportunity employer and is committed to attracting, developing and retaining highly qualified talent who empower our innovative teams through unique perspectives and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veterans' status, or any other characteristic protected by federal, state, or local laws. Slalom will also consider qualified applications with criminal histories, consistent with legal requirements. Slalom welcomes and encourages applications from individuals with disabilities. Reasonable accommodations are available for candidates during all aspects of the selection process. Please advise the talent acquisition team if you require accommodations during the interview process. We will accept applications on an ongoing basis through January 23, 2026

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time- 10 days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. Compiles and/or completes project as built and close-out documentation. Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. Selects, orders, and tracks the delivery of materials for assigned projects. Coordinates factory-mounting processes to meet factory and project schedule. Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. May provide field change information to the project team for the creation of as-built drawings and software. Keeps management and JCI contractor or customer informed of job progress and issues. Assists in performing site-specific training for owner / operator on the total building control system. Participates in release meeting with project field team. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions. What we look for Required Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. Minimum of Four (4) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. Vocational School program graduate or an associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. Demonstrated ability to install and/or service electronic control systems and HVAC equipment. Effective communication skills to represent Johnson Controls on customer sites. Possesses the ability to explain technical information to technical and non-technical people. Demonstrate effective writing skills as well as understanding of programs and software applications. Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $26.92-$33.65 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Artech Information Systems is the #12 Largest IT Staffing Company in the U.S. and an employer of choice for over 7,000 consultants. We recruit world-class talent for IT, engineering, and other professional jobs at 70+ Fortune and Global 500 companies coast-to-coast across the U.S., India, and China. We are one of the fastest-growing companies in the US and we welcome you to search the thousands of jobs in our cutting-edge GEM system for employment opportunities that fit your qualifications. At the forefront of the staffing industry, Artech is a minority and women-owned business enterprise (MWBE) committed to maximizing global workforce solutions on behalf of its clients. Artech's deep heritage, proven expertise and insightful market intelligence has secured long-term partnerships with Fortune 500 and government clients seeking world-class professional resources. Job Description Primary PurposeUnder close supervision, performs basic functions requiring technical knowledge utilizing electronic applications, processes, standards and document control processes/procedures.Principal Duties and ResponsibilitiesEngineering Standards: Continues to learn and apply standards, systems, document control, departmental guides and B&V policies and procedures. Quality / Continuous Improvement: Ensures that deliverables are accurate and compliant by continually developing knowledge of the B&V Quality Program. Demonstrates personal accuracy and supports continuous improvement and change management efforts. Engineering Production: Broadens knowledge of the applications required to modify and develop less complex deliverables based on a variety of design inputs. May assist with minor computations such as material quantity estimates and dimensional checks. Project Coordination: May assist in coordinating deliverables with other groups involved on the same project to minimize interference or errors. Client Focus: Focuses on the needs of internal clients while attempting to gain basic understanding of external client's main interests and drivers. Knowledge Sharing, Innovation and Technology: Proactively seeks and shares knowledge of latest technologies and processes.Minimum QualificationsAssociate Degree in Drafting or an Engineering Design Related Technology preferred. GCSC (Draft generic educational equivalent required. Minimum of 1 year related work experience.Preferred Job Qualifications1 year of experience required. Proficiency with Bentley Microstation required (**THE CANDIDATE WILL BE TESTED ON THIS**) Experience with AutoCAD and/or PLS-CADD are a plus but not a requirement. Diploma or Certificate preferred. Non-Technical: Learning on the Fly, Problem Solving, Perseverance, Patience, Time Management, Drive for Results, Self Development, Customer Focus, Listening,Informing. Technical: Intermediate knowledge of Computer Automation Additional Information For More Information, Please Contact Subh ************

Base up to $125,000 for highly qualified candidates You'll design and deliver responsive control solutions across diverse machine applications. Using a common “toolbox” of components and patterns, you'll take projects from customer discovery through PLC/HMI/Motion/Network programming, to validation and startup (typically day trips). Most projects complete in < 6 weeks, so you'll see your work move from concept to production quickly. You'll collaborate with a principal engineer, fellow engineers, drafters, PMs, and technicians-ideal for someone who takes pride in clean, well‑documented code and enjoys learning new tools. What You'll Do Lead full life‑cycle controls projects: discovery, architecture, I/O mapping, programming, bench test, FAT, on‑site startup. Program PLCs (IEC 61131‑3-Structured Text & Ladder), HMIs, motion/servo systems, and industrial networks. Build reusable libraries/toolbox components and maintain disciplined versioning and documentation. Integrate field devices (sensors, drives, pneumatics), tune motion, and validate machine safety per applicable standards. Travel for short startups/service (generally day trips; overall < 15%). Partner cross‑functionally to refine requirements, review schematics, and hand off to production and support. What You'll Bring (Core) Solid electronics fundamentals; comfortable with a multimeter and tracing signals. Applied programming aptitude (clean style, basic algorithms/complexity, disciplined documentation). Proficiency in one or more languages: C/C++/C#/Python/Java/JavaScript/Ruby. Comfort with Linux/Windows command line, spreadsheets/data normalization, and Boolean logic. Problem‑isolation mindset, pragmatism (seek resolution over perfection), and clear communication with teams & customers. Willingness to write organized, well‑documented code and learn new stacks quickly. Nice to Have (Preferred) PLC/HMI/Motion: IEC 61131‑3 (Structured Text & Ladder); CoDeSys/SoMachine on Schneider & Wago; Rockwell/Allen‑Bradley; Mitsubishi (FX/A/Q/iQ); HMI for Schneider (Proface), Red Lion, Mitsubishi, PanelView; SoftMotion; servo systems. Standards & Schematics: ANSI Y32.2/IEEE & IEC electrical symbols; ANSI/ISA S5.1 P&IDs; working knowledge of UL508A & NFPA 79. Networks: Modbus TCP, EtherNet/IP, CANopen, J1939. Commissioning: Startup/troubleshooting of automation systems; calm, customer‑facing guidance. Broader tech: Databases; web/UI; embedded (PIC/Atmel) in C/C++; assembly; sockets; scripting/CLI automation; VMs/Docker/Kubernetes; Linux build/config; Perl/PHP/regex; IT; REST/OAuth. Experience: 5+ years strongly preferred for immediate impact and top‑of‑band compensation. Working Environment Primarily on‑site in Beaverton, OR; fieldwork spans clean‑rooms to quarries to military sites. Travel is mostly within driving distance; startups are typically day trips and total travel is generally < 15%. Compensation & Benefits Base Pay: Up to $125,000 for highly qualified candidates Benefits: Flexible schedule; paid vacation + additional PTO; paid holidays; healthcare; specialty training and new skills development; and more. Salary info: $43.27 - $60.10 / hr