Electrical apprentice jobs in Gillette, WY

Encore Electric, Inc. is a licensed Wyoming Electrical Contractor with long-term, consistent work in Cheyenne. Come work for a reputable contractor that will keep you busy! As a perk for working for us, we will pay for your electrical schooling and give you the opportunity to learn hands-on electrical work. OVERVIEW: An Apprentice Electrician participates in commercial electrical construction and follows direction from Journeymen. * NEW, UPDATED PAY RATES & JOB SITE INCENTIVES ADDED* - APPLY NOW TO LEARN MORE * COMPENSATION: competitive hourly wage + an additional job site incentive!!! * HOURS:50-58 hours per week, Mon-Sat (schedule subject to change) * PERKS: housing/per diem available for travelers, LONG-TERM work, job site incentive pay, paid schooling, and more! Job Description: The Apprentice Electrician participates in commercial electrical construction and service work. The electrical apprenticeship includes company paid electrical schooling and on the job training hours over 4 years. Physical Requirements: A functional physical is required to be completed an passed before work can be performed in all field positions. The physical requirements can often be completed repetitively and for extended periods of time. These requirements include. * Driving * Sitting * Climbing * Lifting, floor to chest (up to 50lbs) * Lifting, floor to waist (up to 50lbs) * Lifting, waist to overhead (up to 30lbs each arm) * Carrying (up to 50lbs) * Standing * Stooping * Vision acuity (near, far and without color deficiencies) * Walking * Kneeling * Trimming (final installation of electrical devices) * Pushing (up to 100lbs) * Pulling (up to 100lbs) Additional Requirements: High School Diploma or equivalent is required with a degree in related field is preferred. * Apprentice 2: 1,000-2,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 3: 2,000-3,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 4: 3,000-4,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 5: 4,000-5,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 6: 5,000-6,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 7: 6,000-7,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 8: 7,000-8,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice RTT: 8,000+ on-the-job training hours as outlined by apprenticeship program requirements Benefits: * Encore Electric provides excellent benefits for our employees, including: medical, dental, and vision plans, disability, and life insurance, employee-matched 401(k), paid time off (PTO), an employee assistance program that includes counseling, legal, and financial advice. * Encore also provides a generous employee referral program, and access to technical, safety, personal finance, and leadership training through Encore University, Encore's in house training program. * This position is eligible for a job site incentive, housing, and per diem. Applications will close on December 31, 2025 or once role has been filled. To request an accommodation during the application process, please contact *********************. Encore Electric, Inc. is an EOE, including disability/vets.

Job Description Ready to take your electric career to new heights? Look no further! Black Wolf Electric in Rock Springs, WY, is seeking enthusiastic 3rd or 4th Year Electrical Apprentices to join our electrifying team of electricians. Job locations are throughout Wyoming including Rock Springs, Cody, and Cheyenne. If you're an experienced 3rd or 4th Year Electrical Apprentice who's ready to amplify your career, join us and start earning a competitive wage of $22 - $26 per hour. But that's not all! Our exceptional benefits package includes 5 paid holidays, a tool account, paid training, paid licensing, vacation, tuition reimbursement, advancement opportunities, medical, dental, vision, and supplemental insurance as well as matching 401k. We also offer this role performance bonuses on projects, paid licensing, paid training, and per diem for out-of-town overnight work! ABOUT US At Black Wolf Electric, we stand as a comprehensive electrical contractor renowned for our expertise in commercial, fire alarm, fiber, data, high voltage, and residential/commercial services. Our culture thrives on unity and support, with an open-door policy that values every voice. We prioritize work-life balance within a family-oriented framework and take pride in recognizing and advancing talent proactively. Our unique approach fosters multi-dimensional expertise, ensuring each employee becomes a master in all domains. At Black Wolf Electric, our employees experience not just a workplace, but a cohesive and enriching journey! ABOUT THIS JOB AS OUR 3RD OR 4TH YEAR ELECTRICAL APPRENTICE At Black Wolf Electric, we don't settle for ordinary - and neither should you! Embrace the buzz of a 7 AM to 5:30 PM schedule, rocking a 4-10's rhythm that keeps you charged. Your role as a 3rd or 4th Year Electrical Apprentice isn't just a job; it's an electrifying journey. Picture yourself deciphering plans, collaborating with dynamic teams, and ensuring installations that not only meet codes but radiate excellence. Each day is a fusion of precision and innovation, transforming blueprints into tangible brilliance for residential, commercial, and industrial clients. All that you need to excel as our 3rd or 4th Year Electrical Apprentice is the following: Wyoming 3rd or 4th year electrical apprentice license Experience installing various conduit and raceway types Proficiency in interpreting blueprints and technical diagrams Ability to use testing devices to identify and report electrical problems Valid driver's license and a clean driving record Willingness to travel as needed ADVANCE YOUR ELECTRIC CAREER TODAY! Join us in crafting a brighter, more electric tomorrow - take the leap and shine with Black Wolf Electric! Our quick, easy, and mobile-friendly application process means your future is just a click away. Supercharge your career - join us today! Job Posted by ApplicantPro

Electrical Apprentice Company: Loenbro - Industrial Services Group Reports To: Journeyman / Job Foreman / Superintendent Do you want to work for an industry leading, growing, diversified employer who believes in doing what we say, leading by example, doing the right thing, and practicing stewardship? Loenbro is a leader in the industrial services space who strives to be more than just a contractor to our customer, but a business partner who provides superior quality and service. This is your opportunity to work for a great employer who puts employees and their customers first. We have worked hard to build and maintain our reputation and are looking for industrious, conscientious, and motivated individuals to join our team. We encourage you to visit our website at *************** to learn more about our organization and who we are. Position Overview: The Apprentice Electrician, under the direction of the Master Electrician, is responsible for the installation, start-up, troubleshooting, commissioning, and servicing of industrial / commercial electrical equipment and systems. This position will be responsible for following the directions of the Journeyman Electrician to complete electrical maintenance and repair work. Job Duties: * The Electrician Apprentice will assist the Electrician with basic tasks. * Complete Maintenance work orders on electrical equipment. Testing malfunctioning equipment, identifying defects, troubleshooting, repairing equipment and replacing defective parts. * Collaborate with other electrical staff to identify and resolve problems. * Keeps personal equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. * Documents service and installation actions by completing forms, reports, logs, and records. * Up-dates job knowledge by participating in educational opportunities; reading professional publications. Skills/Qualifications: * 2-4 years of electrical apprenticeship preferred. * Demonstrate knowledge of electrical codes. * Possessing the ability to understand schematics and technical manuals * Must be dependable and have excellent communication skills, both oral and written. * Must be willing to submit to pre-employment screening, including criminal background check and drug screen. * Basic computer knowledge is required. * Must be 18 years of age or older. * 2-4 yrs exp preferred. Potential Hazards: * Potential exposure to extreme cold and hot temperatures. * Fit and move in confined spaces. * Limited working surfaces. * Exposure to noise above 85 decibels and intense odors. * Exposure to areas with limited visibility. Benefits * Personal Time Off (PTO). * Health Benefits: All employees are eligible for medical, dental, vision and life insurance coverage. * 401(k) Retirement: The Company provides a 100% match of the first 4% of employees' contribution each year, to the plan. Eligibility is immediately following 90 days of employment. We are "Leading the Change" in the Energy Services Industry. Our growth and successes have not changed who we are. We live our core values every day. WE TAKE ACTION WE DO WHAT WE SAY WE LEAD BY EXAMPLE WE DO THE RIGHT THING WE PRACTICE STEWARDSHIP Loenbro is an Equal Opportunity Employer.

Total Electric of MT, an electrical contracting company in Livingston MT, is seeking applicants for full time laborer positions with potential advancement opportunities to become an electrical apprentice. Keep work trucks/trailers clean, maintains tools/equipment, load and unload materials at job sites, unbox items, etc. Here at Total Electric of MT, we know that our employees are our most valuable asset to create a long-term customer base and drive our continued success. It takes our entire team - ranging from our field employees to our office staff - to create and sustain a company that truly values excellence and doing the right thing, every time. We offer great benefits, including $18+/hour depending on experience, health insurance, retirement plan, paid holidays, paid vacation, paid personal days, paid travel time. Total Electric of MT is an Equal Opportunity Employer. The recruitment, selection, employment and training of all employees will be without discrimination because of race, color, sex, pregnancy, childbirth or medical conditions related to pregnancy or childbirth, political or religious affiliation or ideas, culture, creed, social origin or condition, genetic information, sexual orientation, gender identity or expression, national origin, ancestry, age, disability, military service or veteran status or marital status. Accessibility: If you need an accommodation as part of the employment process, please contact Human Resources at Phone: ************ Email: ************************ Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese If you want to view the Pay Transparency Policy Statement, please click the link: English

Cyclone Drilling is looking for an Oilfield Electrician to add to our team. This position offers great benefits and a fast-paced, exciting career in the Oil and Gas Industry. The ideal candidate will have 2+ years working as an Electrician in the Oil and Gas industry as well as be willing to travel to rig locations as needed to perform routine maintenance and repairs. Qualifications Required: * 2+ years experience in the Oil and Gas industry as an Electrician * Effective written and verbal communication * High School Diploma or Equivalent * Ability to travel and work on a flexible schedule. * US Citizen or Green Card holder Preferred: * 5+ years experience as an Electrician in the Oil and Gas Industry * Safeland USA training * Strong work history of maintaining job with the same employer * Any Certificates relating to the position. Company Information At Cyclone Drilling, we believe that the hiring and training of good people is critical for the continued success of our company. The foundation of Cyclone Drilling's success starts with solid leadership that knows how to foster a positive and safe work environment, while providing competitive compensation and benefits. If you believe in delivering high quality work and developing your talents in a team environment, then you would be a good addition to the Cyclone Drilling team. Employment opportunities exist in Colorado, North Dakota, Montana and Wyoming. Cyclone Drilling is known for providing superior solutions through teamwork with our industry's leading professionals who complete tasks successfully.

The mine electrician will perform electrical inspections and maintenance on all mine equipment including trucks, shovels, facilities, etc. Skills, Knowledge, and Experience Required MSHA low, medium and high voltage electrical certification required Experience in electrical troubleshooting and repairs on all mining equipment Computer knowledge including Microsoft Office applications (Word, Excel, etc.), SAP, and the willingness to learn associated plant and maintenance software applications Satisfactory performance and safety record Interpersonal skills to effectively communicate and coordinate activities with other technicians, outside vendors and all other employees Ability to work with little or no supervision and capable of making decisions and solving problems Comply with Company drug and alcohol program $28.37 - $37.67 / hour

Job Description Vacutech, a member of the National Carwash Solutions family, has grown over the past 45 years to become North America's largest equipment, service, and cleaning solutions provider in the car wash industry. NCS's bundled solutions allow you to customize services to get exactly what you need, when you need it, for a solution that truly benefits you and your business. From product assembly, installation and service, our teams are here to help every step of the way. Come join us for an extraordinary career in a high growth, team-oriented company! As a Powdercoat Apprentice , you will be responsible for several tasks leading to proper order fulfillment and delivery of consistently high quality products to our customers. This role is responsible for appropriately powder coating various products that go through the powder coat department. Job Duties: Prepare parts and products for coating Safely operate and handle equipment to apply power coat onto various parts and products Follow all principals and practice of powder coating application Deciphering tags to ensure that accurate parts and colors are being used Bake parts and products at appropriate temperatures within time limitations Pulling racks out of ovens when cure temperature is met Transporting the racks within the Powder Coat Department to facilitate out-gassing of components, powder application, and cure Comply with all applicable OSHA, EPA, local regulatory laws, and company safety policies Management retains the discretion to add or change the duties of this position at any time Qualifications: High school diploma or equivalent Strong background in powder coating, Knowledge of materials, methods, and the tools involved in the application of powder coating Mathematical skills such as adding, subtracting, multiplying, dividing Ability to follow verbal instructions Strong attention to detail

**Requisition ID: 175258** Buckskin Mining Company is a surface coal mine located 10 miles north of Gillette, Wyoming within the Southern Powder River Basin. The mine delivers its coal to numerous customers throughout the United States and has shipped more than 406 million tons of high-quality, low sulfur coal to its customers. Buckskin is currently seeking a highly motivated and experienced MSHA Certified Electrician to join its team. Eligible applicant(s) must be able to work safely in a surface coal mine environment while performing duties of this position. This person(s) must have a history of producing quality work with attention to detail and completing the job right the first time. This person(s) must poses the following certifications and experience. **Certifications** MSHA Electrical certification is required. **Primary Responsibilities and Duties** 1. Knowledgeable in NEC and MSHA requirements 2. Able to complete MSHA monthly inspections 3. Troubleshooting electrical issues on mobile heavy equipment including; + Electric drive haul trucks + Electric shovels + PLC control Systems + Light plants + Overhead cranes + Elevators and Conveyor belts + Substations + High voltage power distribution systems + AC/DC motor maintenance + 24 volt electrical systems 1. Able to maintain office, shop and plant facilities 2. Must be able to read and follow electrical drawings. 3. Able to perform job duties safely with minimal supervision and in accordance with all applicable laws and company policies. **Qualifications** - May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. - Must possess working knowledge skills and abilities for position. - Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision. - Ability to use hand tools, power tools and layout tools safe and efficiently. **Requirements** - Able to meet all physical requirements. - Must have all required tools - Expected to climb and work at heights and in confined spaces (may exceed 200 ft) - Able to work outdoors in all weather conditions - Able to work overtime, nights, and weekends as required by the workload - Observe and comply with all safety and project rules. Performs other duties as required. _We are an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._ Company: Kiewit_Craft

This position will be located at Denny's Electric LLC in Dickinson, ND. Seeking experienced and dedicated full-time Journeyman Electricians to work as leaders and to perform and mentor quality work in various areas of the field - such as Commercial, Residential, Industrial, and Service. Are you gifted in this skilled trade? Are you eager to work for a company that values and respects you and your family? Would you like to work for a company that is owned, operated and local to the area for over 46 years? Monday - Friday, over 50 hours, earn upwards of $150,000 - $200,000 a year, including benefits and depending on experience. We provide our skilled trade team with an excellent benefit package: 100% company-paid Blue Cross Blue Shield health insurance for ENTIRE family, $50,000 Life Insurance Policy (company paid), Retirement plan with a company match, 7 paid holidays, Paid Vacation, and MORE! If this sounds interesting to you, apply today! ABOUT DENNY'S ELECTRIC LLC Established in 1978, Denny's Electric is a family-owned and operated company specializing in industrial, commercial, residential, and service electrical contracting. We proudly serve the Western, and Central ND region. We maintain competitiveness by being diverse in our areas of specialty, from being the leading Generac & Winco Generator Dealer in the area to home automation, security system installs, and much more... We pride ourselves on being one of the only contractors in the area who diversifies ourselves to the extent where we retain employees no matter of the economic rollercoasters. In order to offer the highest in cutting-edge services, we strive to hire and retain the best. Our professional team is dedicated to their craft, quality of work and exceptional customer service. For their efforts, we offer competitive compensation, excellent benefits, and a family-oriented work environment. JOURNEYMAN ELECTRICIAN QUALIFICATIONS Journeyman License Valid driver's license, and good driving record Able to pass a background check and drug screening Work well individually and as a leader Valid references for past employment

Are you looking for a stable position with great benefits? Look no further!!! Wood is currently hiring for a Journeyman Electrician for Atlas Carbon project located near Gillette, Wyoming. Our electricians do everything from light industrial to advanced controls. Wood offers multiple medical, dental and vision plans, a 100% vested 401k from date of employment, company paid life insurance, PTO (Paid Time Off) and much more. Authorization to work lawfully in the US without sponsorship from Wood is required. Responsibilities Job Specifications: Determine appropriate actions for work performed based on written, diagrammatic, and/or verbal instructions received Determine causes of defective performance and make repairs as needed Replace faulty wiring and electrical components such as relays, switches, motors, VFD's, printed circuit boards, position sensing devices and maintain electrical substation equipment Maintain current technical knowledge of government and company policies, codes and regulations Perform preventative and corrective maintenance on all electrical equipment Responsible for following safety procedures and maintaining safety data Adhere to all safety requirements, local NEC and NEC codes Qualifications Technical/Business Skills, Experience and Training Must have experience in the field/plant Must meet all WY Licensing requirements for Journeyman Electrician Current Wyoming journeyman license or be able to reciprocate is preferred Must be comfortable with computer and configuration software Must be able to pass pre-employment drug, back ground and fit tests before hiring.

Are you looking for a stable position with great benefits? Look no further!!! Wood is currently hiring for a Journeyman Electrician for Atlas Carbon project located near Gillette, Wyoming. Our electricians do everything from light industrial to advanced controls. Wood offers multiple medical, dental and vision plans, a 100% vested 401k from date of employment, company paid life insurance, PTO (Paid Time Off) and much more. Authorization to work lawfully in the US without sponsorship from Wood is required.

Job description🚀 Launch Your HVAC Career with Premier's Fast Track to Lead Program Tired of dead-end jobs that don't go anywhere? At Premier Systems, we're building the next generation of HVAC leaders - and it starts with our Apprentice Program. From day one, you'll be earning, learning, and working side-by-side with experienced pros who'll push you to grow. This isn't coffee runs or standing around. This is hands-on training, real projects, and a clear path to become a certified HVAC professional - with pay that grows as fast as you do. What You'll Get 💰 Competitive Pay: $22-$28/hr DOE 📈 Fast Track to Lead: Structured training designed to take you from apprentice to installer and beyond. 🛠 Hands-On Experience: Work on real installs from day one - not just watch. 🎉 Team Culture: A crew that's competitive, supportive, and knows how to win together. 🌊 Lifestyle Perks: Mexico trips, lake days, golf tournaments, fishing trips, elk hunts, mechanical bull rides, even “crush a car” competitions. 🥩 Meat Bucks Program: Earn credits to stock your freezer with locally raised beef, pork, and wild game. 📅 Real Benefits: PTO, paid holidays, uniforms, referral bonuses, and a company vehicle once you step into lead roles. Why You'll Love It Here At Premier, we're not just training you to “do HVAC.” We're investing in you to become one of the best. You'll be challenged, respected, and given every opportunity to grow. Every day will be different - new projects, new skills, and new wins with your team. Your Role as an Apprentice Assist on installs: rough-ins, trims, and system start-ups. Manage tools and prep job sites for smooth projects. Learn essentials: drilling, wiring, venting fireplaces, installing garage heaters. Keep sites clean, safe, and ready for inspection. Support duct + dryer vent cleaning. Work side-by-side with mentors who want to see you succeed. Job requirements What It Takes High school diploma or equivalent. 6+ months in HVAC, construction, or service field. Basic hand tool knowledge. Valid MT driver's license, clean record. Ability to lift 75 lbs and handle physical work. Preferred: Mechanical-based degree or technical program. OSHA 10/30 or EPA certification. Experience with ServiceTitan. The Bottom Line If you've got the drive and the grit, we'll give you the tools, training, and path to become a lead installer faster than anywhere else. At Premier, you're not just an apprentice - you're a future leader in the trade. Premier Systems is a Drug-Free / Alcohol-Free / Tobacco-Free Workplace. Equal Opportunity Employer. 👉 Ready to start your career the right way? Apply today and join Premier's Fast Track to Lead Program. All done! Your application has been successfully submitted! Other jobs

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Responsible for inspecting, troubleshooting, repairing and maintaining a variety of moderately complex to complex instrumentation and electrical equipment to include control systems, sensors, analyzers, electrical motors, pneumatic instrumentation, programmable logic controllers, etc. to insure optimum performance of machines and associated equipment. Adheres to all health, safety, and compliance requirements in accordance with federal and state regulations. Primary Duties/Responsibilities: Troubleshoot and repair existing problems by utilizing a variety of electrical testers/devices to determine possible causes for problem situations. Dismantle a variety of electrical devices to gain access to and remove defective parts and reassemble and test for optimum performance. Repair and/or replace functional parts of control instruments and ability to interpret instructions and diagrams in correcting existing problems. Maintain appropriate records on completed work performed and forwards logs along with findings to the immediate supervisor. Assist with equipment failure analysis. Set up and check preventive equipment such as emergency generators, cathodic protection, change desiccant in water's air system, waste feed cut off testing, analyzer gas equipment, etc. to ensure that safety measures are maintained within the facility. Maintains the proper paperwork daily by ensuring that it is filled out and updated accurately. Calibrates stack analyzers, pH probes and low flash oxygen analyzers. Changes oxygen filters, gas cylinders and setting regulators. On an as-needed basis, order needed parts and machinery and keep adequate inventories to meet scheduled on-going electrical/instrumentation maintenance programs. Other work-related duties as assigned. Qualifications Education/Experience/Background: High School diploma or General Educational Development (GED) is required. Two years of work experience. Knowledge/Skills/Abilities: Strong team player. Excellent interpersonal and communication skills. Time management: the ability to organize and manage multiple deadlines. Strong customer orientation. Required Certification/Licenses/Training: State Journeyman's Electrical License is required. 24-hour HAZWOPER Certification. Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Electrical Maintenance Technician - Draglines & Electric Shovels Schedule: DuPont Schedule - 12-hour rotating days/nights (6:30 AM-6:30 PM), 7 days on / 7 days off Employment Type: Full-Time, Temporary with possibility of converting to permanent position after 6 months. Turner Staffing Group is seeking Electrical Maintenance Technicians to support operations on draglines and electric shovels at the North Antelope Rochelle Mine near Wright, Wyoming. This role is ideal for professionals with strong DC motor/generator troubleshooting skills who thrive in heavy-industrial or mining environments. Key Responsibilities Perform preventive and breakdown maintenance on draglines, electric shovels, and other fixed/mobile plant equipment in an open-cut mining environment. Visibly support and champion our client's mission, values, and “Safety as a Way of Life” culture. Inspect work areas and equipment for hazards, damage, and defects. Review drawings or specifications to determine work methods and sequences. Diagnose faults, breakdowns, and electrical issues. Estimate time and materials needed, raise material orders, and complete repairs or component changeouts as required. Clean and maintain tools, equipment, and work areas. Train or mentor apprentices or other personnel as needed. Ensure compliance with safety, environmental, and statutory requirements. Perform other duties as assigned. About You At least 3 years of electrical maintenance experience in a heavy-industrial setting (mining preferred, but steel/paper mills are also valuable backgrounds). Strong DC motor/generator troubleshooting and repair experience is required. 480-600V experience PLC experience is highly preferred Willingness to obtain MSHA certification and a Wyoming Mining Electrical Card during onboarding (if not currently held). Ability to solve problems independently and troubleshoot issues in pit areas. Comfortable working in all weather conditions, at varying times of day, including rotating shifts, weekends, and overtime. High School Diploma or GED required. Physical Requirements Ability to stand or sit for extended periods (up to 4 hours). Comfortable climbing stairs, ladders, and equipment; working from elevated positions. Capable of frequent lifting/carrying (10-50 lbs) without mechanical assistance. Ability to perform repetitive motions, maintain rapid reflexes, and demonstrate good hand-eye coordination. Must wear required PPE (protective footwear, hearing/eye protection, etc.) and work in varying light, noise, and weather conditions. Work Schedule & Lifestyle DuPont schedule: 12-hour rotating shifts, 7 days on / 7 days off. May require work on weekends, holidays, or alternate shifts as business needs demand. Requirements Must be authorized to work in the U.S. (no work visa sponsorship available). Successful candidates must pass pre-employment screenings and meet all safety standards. Join Turner Staffing Group and make an impact by supporting one of the world's leading surface coal operations. Apply today to bring your electrical expertise to an exciting, high-performing mining environment!

We are seeking a highly motivated, self-starting individual to join our maintenance team as an Electrician Technician. This role requires basic mechanical and electrical knowledge and includes preventative maintenance, repairs, and installations involving electrical troubleshooting, breaker replacements, lighting, electric heaters, and remodel rough-ins. The Electrician Technician will also coordinate with outside contractors on sourced projects, maintain accurate service logs for resort equipment, and ensure work areas are kept clean and organized. The ideal candidate has a strong work ethic, a friendly and positive attitude, excellent communication skills, and the ability to adapt to changing priorities while working both independently and as part of a team. Previous electrical experience and certifications are preferred but not mandatory. Pay is based on experience and qualifications. Responsibilities * Respond to all service requests in a timely manner * Communicate with all team members on pending projects and repair status * Consistently follow assigned work schedules * Maintain service logs for all resort equipment * Keep work areas clean and organized and maintain a parts inventory * Work with outside contractors on sourced projects * Safely lift 50-75 lbs., use ladders, and work in all four seasons in a mountain environment * Follow through on all projects and tasks assigned by supervisors Qualifications * Valid Driver's License * Self-motivated team player * Friendly and dependable demeanor * Must have or be willing to obtain EPA Universal Refrigeration License Be a part of our full-time year round team and enjoy these great benefits! * Free Ski Pass for you, your spouse and dependents * FREE Golf Pass for you, your spouse and dependents * Free Scenic Lift Pass for you, your spouse and dependents * FREE Basecamp activities including zip line courses and discounted passes for spouse and dependents * Steep Lodging discounts for accommodation for friends and family (blackout dates apply) * 25% off Food discount at all outlets with charging privileges * 20%-30% off Retail discount at all outlets with charging privileges, gear and sponsor discounts * Eligibility for affordable employee housing, a short walk or free bus ride away from work * 401k and Health benefits for you and your family

INNOVATE WITHOUT BOUNDARIES! At Milwaukee Tool we firmly believe that our People and our Culture are the secrets to our success - so we give you unlimited access to everything you need to create disruptive new technologies and solutions on our electrical engineering teams. Our Engineering Team is responsible for giving life to the batteries, motors, and electronics that power solutions changing the lives of our users. Every developmental phase of these critical components happens in-house under the watch of this team. We continue to invest in electrical engineering resources to design and develop leadership in electronic capabilities; something unique within the industry. Behind our doors you'll be empowered every day to own it, drive it, and do what it takes to design and develop the biggest breakthroughs in the industry. Meanwhile, you'll have the support and resources of the fastest-growing brand in the construction industry to make it happen. Year after year, our team continues to make significant breakthroughs in the industry. We're just getting started. To learn more about our story click HERE. The Battery Technology Engineer I will collaborate with Engineering and Operations teams globally to design, build, and qualify innovative battery solutions - revolving around best-in-class Li-Ion cells, battery management systems, and a commitment to high-performance & compatibility with every platform tool. You will join a team of passionate electronic, firmware, mechanical and IoT engineers to deliver the next Milwaukee Tool breakthroughs. You'll also be DISRUPTIVE through these duties and responsibilities: Design, prototype, test and troubleshoot battery systems including both hardware and firmware. Create test plans for components and assemblies within the scope of the project and organization. Use laboratory equipment such as oscilloscopes, power supplies, e-loads and data acquisition systems. Track projects to ensure adherence to schedule and the Milwaukee process. Draw concise, logical, written conclusions from experiments based on data analysis. Schedule, develop agendas for, facilitate and document technical meetings and formal presentations. Develop and maintain familiarity and understanding of Milwaukee's development and manufacturing processes. Work with and establish trusting relationships with engineers throughout Asia and the world. Design to and qualify new designs to applicable regulatory standards such as UL, CEC, CE and ANSI. What TOOLS you'll bring with you: Bachelor of Science Degree in Electrical Engineering or related field. Understanding of Li-Ion or other cell chemistries; battery system design, architecture, testing, or integration. Ability to work well within cross-functional teams, communicate effectively, and manage time/task delegation efficiently. Familiarity with operating various lab equipment such as power supplies, oscilloscopes, and e-loads. High proficiency in Microsoft Office programs, especially Excel and Power Point. Excellent problem-solving skills, exercises independent judgement and performs consistently under pressure in a dynamic environment. Ability to travel 10% of the time (domestic and international). Other TOOLS we prefer you to have: Working knowledge of a second modern programming language such as Python or C++. Experience with analog and digital system design. We provide these great perks and benefits: Robust health, dental and vision insurance plans. Generous 401 (K) savings plan. Education assistance. On-site wellness, fitness center, food, and coffee service. And many more, check out our benefits site HERE. Milwaukee Tool is an equal opportunity employer.

About the role: We are currently seeking an Electrician to join our Open Cut Maintenance team at our North Antelope Rochelle Mine (NARM). NARM is the world's largest surface coal mine and is located in Wright, Wyoming. The mine produces high quality thermal coal that is loaded onto haul trucks and then shipped by rail. It has approximately 465 million tons of coal reserves. As part of Campbell County, Wright is a safe, tight-knit community with outstanding schools, and various recreational opportunities. Peabody's NARM Mine has a safety-first culture and strives to have zero recordable MSHA injuries/incidents. This role will carry out preventive and breakdown maintenance to fixed and mobile plant in an open cut environments. Duties will include: * Visibly support and champion Peabody's Mission and Values * Act in accordance with and adhere to Safety as a Way of Life Management System * Inspect work area and plant for hazards, damage and defects * Examine drawings or specifications to determine work methods, sequence of activities or manufacture of components * Diagnose faults or breakdowns * Estimate time and materials required to complete jobs * Raise orders for materials * Undertake repairs or component changeouts as required * Clean and maintain tools and work area * Train other personnel or apprentices (if required) * Ensure activities comply with safety, environmental and statutory requirements * Other duties as assigned by the company The Lifestyle: This position may require the necessity to work weekends, holidays, or another shift as deemed necessary. We provide 401K matching, medical, dental and vision health plans with minimal cost to the employee. Benefit eligibility starts on your first day of work. About you: * Three years' experience performing electrical maintenance work in a heavy industrial environment or mine site is preferred. * Ability to solve problems and troubleshoot situations arising in the pit area as needed. * Ability to work in all types of weather conditions and at different times of day. * Ability to work a flexible schedule as required by business need. * Ability to work rotating shifts, weekends and overtime when required. * High School Degree or GED Equivalent required Physical Requirements - Surface: * Must have the ability to stand for up to 4 hours per shift * Must have the ability to be seated for up to 4 hours to operate equipment or vehicles * Must have the ability to work from elevated positions, walk/climb up and down stairs/steps and climb on and off equipment and ladders * Must have the ability to wear required protective footwear, hearing and eye protection, and other personal protective equipment as required by Company and MSHA * Must have the ability to perform repetitive hand and wrist motions (push, pull, twist, handle), and have rapid reflex movements of the arms and legs and good hand to eye coordination * Must have the ability to lift/raise 10 - 50 lbs. without mechanical assistance frequently during the course of work shift * Must have the ability to work in extreme conditions, including but not limited to changing weather conditions, dust, mud, varying levels of noise from low to high, varying degrees of light and dark, in and around artificial light and in a confined work area * The job requires that you be able to work various shifts (required shifts include days, evenings and nights with rotating schedules, weekends and holidays This is not intended to be all-inclusive; an employee will also perform other related job responsibilities as assigned by immediate supervisor and other management as required. Peabody reserves the right to revise s or change and/or modify job responsibilities, functions and requirements as the need arises. This job description does not constitute a written or implied contract of employment. About Peabody: Peabody is a leading coal producer, providing essential products for the production of affordable, reliable energy & steel. We employ approximately 5,500 people across our operations in the United States & Australia, serving customers in 26 countries. Our commitment to sustainability underpins everything we do and shapes our strategy for the future. People are at the core of Peabody's ability to deliver business results & serve our communities & we offer an inclusive work environment that engages, recognizes, and develops it employees. We strive to create a safe and healthy work culture where all employees are treated with fairness and respect are supported and engaged. Take the first step toward a rewarding career working with us at: Peabody - US Jobs (peabodyenergy.com) EEO Disclaimer: Peabody Energy is an Equal Opportunity Employer. Apply to Peabody today #buildingbruighterfutures

Ready to take your electric career to new heights? Look no further! Black Wolf Electric in Rock Springs, WY, is seeking enthusiastic 3rd or 4th Year Electrical Apprentices to join our electrifying team of electricians. Job locations are throughout Wyoming including Rock Springs, Cody, and Cheyenne. If you're an experienced 3rd or 4th Year Electrical Apprentice who's ready to amplify your career, join us and start earning a competitive wage of $22 - $26 per hour. But that's not all! Our exceptional benefits package includes 5 paid holidays, a tool account, paid training, paid licensing, vacation, tuition reimbursement, advancement opportunities, medical, dental, vision, and supplemental insurance as well as matching 401k. We also offer this role performance bonuses on projects, paid licensing, paid training, and per diem for out-of-town overnight work! ABOUT US At Black Wolf Electric, we stand as a comprehensive electrical contractor renowned for our expertise in commercial, fire alarm, fiber, data, high voltage, and residential/commercial services. Our culture thrives on unity and support, with an open-door policy that values every voice. We prioritize work-life balance within a family-oriented framework and take pride in recognizing and advancing talent proactively. Our unique approach fosters multi-dimensional expertise, ensuring each employee becomes a master in all domains. At Black Wolf Electric, our employees experience not just a workplace, but a cohesive and enriching journey! ABOUT THIS JOB AS OUR 3RD OR 4TH YEAR ELECTRICAL APPRENTICE At Black Wolf Electric, we don't settle for ordinary - and neither should you! Embrace the buzz of a 7 AM to 5:30 PM schedule, rocking a 4-10's rhythm that keeps you charged. Your role as a 3rd or 4th Year Electrical Apprentice isn't just a job; it's an electrifying journey. Picture yourself deciphering plans, collaborating with dynamic teams, and ensuring installations that not only meet codes but radiate excellence. Each day is a fusion of precision and innovation, transforming blueprints into tangible brilliance for residential, commercial, and industrial clients. All that you need to excel as our 3rd or 4th Year Electrical Apprentice is the following: Wyoming 3rd or 4th year electrical apprentice license Experience installing various conduit and raceway types Proficiency in interpreting blueprints and technical diagrams Ability to use testing devices to identify and report electrical problems Valid driver's license and a clean driving record Willingness to travel as needed ADVANCE YOUR ELECTRIC CAREER TODAY! Join us in crafting a brighter, more electric tomorrow - take the leap and shine with Black Wolf Electric! Our quick, easy, and mobile-friendly application process means your future is just a click away. Supercharge your career - join us today!

Job Description Are you an ambitious Electrician Apprentice looking to advance your career? Monad, a premier provider of heat trace and insulation solutions, is expanding its team and offering an exciting opportunity for an Industrial Apprentice Electrician Year 3.Location: Colorado, Wyoming ($120 Per Diem Days Worked) Salary: ($27-31/hr) DOE Qualifications: The requirements listed below are representative of the knowledge, skill, and/or ability required. Apprentice 3rd Year 4,000 Hrs. Field Experience 300 Hours Classroom Ability to size conduit and wire for installation Ability to test and modify devices/circuit breakers/motors/lights Ability to troubleshoot field devices and problem solve electrical issues Ability to interpret drawings and layout projects Essential Duties and Responsibilities: Engage in hands-on projects on job sites and participate in coursework in a classroom setting. Learn from a Journeyman Electrician and complete all assigned duties. Install heat trace components and insulation. Identify, analyze, troubleshoot, and assist with electrical repairs. Order replacement parts and equipment as needed. Complete electrical installations and various maintenance duties. Communicate with clients in a professional, courteous manner. Collaborate with other trades, companies, and crew members. Prepare and clean work areas. Carry and deliver materials. Use measuring equipment and hand tools for conduit work. Follow safety codes and building regulations. Be willing to travel 75% of the time. Pre-Employment: Must be able to pass a pre-employment drug and alcohol screening along with random testing administered quarterly. Potential employees must be insurable and hold a valid driver's license with experience towing trailers. Safety Qualifications/Certifications OSHA 10 hours or greater MSHA (encouraged) PEC Safeland (encouraged) Forklift Equipment Certification Aerial Lift Equipment Certification What We Offer: Monad values its employees and is committed to providing a supportive work environment.Here's what you can expect: Comprehensive health benefits, including medical and pharmacy coverage. Employee assistance programs for personal and professional support. Competitive pay and Paid Time Off. Eight paid national holidays. 401k FSA and HSA spending accounts. Commuter benefits program. Life, personal accident, and disability coverage.