Electrical engineer jobs in Biloxi, MS

We are seeking an experienced Sr Electrical Designer with over 15 years of electrical design experience in the chemical industry. The ideal candidate will possess extensive knowledge of NFPA-70 (NEC Codes), NFPA-70E, NFPA-496 & NFPA-497, and have experience in hazardous area classification and applying electrical equipment, devices, and installation for hazardous locations. Responsibilities * Coordinate with other department disciplines on small to large projects. * Troubleshoot, commission, and provide start-up support for power and control systems. * Utilize Autocad-19 or later, Brics-Cad, and Microsoft Office Word and Excel. * Engage in 3D modeling related to electrical design, including cable and cable tray routing. * Design power distribution systems from 480V up to 15KV. * Design substations, 15KV switchgear, 5KV medium voltage starters/VFDs, and 480V low voltage smart motor control centers. * Design overhead power line distribution, cable tray systems, and underground duct bank design. * Design electrical heat trace systems, grounding systems, and lightning protection. * Create lighting designs for commercial and industrial facilities. * Work with ABB, Allen-Bradley, Schneider, and other variable frequency drives. * Design auxiliary backup diesel power generators, UPS, and 24VDC systems. * Design security systems, camera systems, fire alarm systems, and communication systems. Essential Skills * Proficient in Autocad-19 or later and Brics-Cad. * Knowledgeable in NFPA-70 (NEC Codes), NFPA-70E, NFPA-496 & NFPA-497. * Experience in power distribution systems and electrical design in the chemical industry. * Proficiency in cable and cable tray routing. * Familiarity with ABB, Allen-Bradley, Schneider, and variable frequency drives. * Ability to design security, fire alarm, and communication systems. Additional Skills & Qualifications * Self-motivated with excellent oral and written communication skills. * Comfortable working in a chemical plant environment. * Capable of working individually or as part of a project team. Work Environment This position requires working in a chemical manufacturing plant and may involve up to 40% travel. The role demands comfort in both individual and team settings, as well as in high-demand environments typical of chemical plants. Job Type & Location This is a Contract position based out of Theodore, AL. Pay and Benefits The pay range for this position is $60.00 - $80.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Theodore,AL. Application Deadline This position is anticipated to close on Dec 18, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Leidos is seeking a talented Electrical Engineer to join our Maritime Systems Division in Long Beach, MS. This role involves designing and integrating advanced electrical power systems for next-generation platforms, including manned and unmanned maritime applications. Candidates with experience in industrial, commercial, or defense-related electrical systems are encouraged to apply. The successful candidate will contribute to both new system development and upgrades of existing platforms. Familiarity with challenging environmental conditions, regulatory compliance, and hands-on system commissioning is highly valued. **Key Responsibilities** + Design and develop electrical power systems, including AC/DC distribution, switchgear, and control systems + Create and update electrical schematics and layouts using AutoCAD + Ensure designs meet applicable standards such as IEEE, ABS, DNV, USCG, and IMO + Collaborate with cross-functional teams to integrate electrical subsystems into larger platforms + Support prototype development, testing, and deployment + Conduct verification and validation of electrical systems + Prepare technical documentation including test plans, reports, and design packages + Troubleshoot and optimize systems for performance and reliability **Required Qualifications** + Bachelor's degree in Electrical Engineering or a related discipline + 3+ years of professional experience in electrical system design and integration + Proficiency in AutoCAD for electrical documentation + Solid understanding of analog/digital circuits and power distribution + Willingness to travel for field testing and system integration + Strong communication and documentation skills + Ability to obtain and maintain a DoD Secret clearance, requires US Citizenship **Preferred Qualifications** + Experience with marine, industrial, or defense electrical systems + Familiarity with PLCs (e.g., Siemens, Allen-Bradley), SCADA, and embedded control systems + Knowledge of MIL-STD design practices and regulatory compliance + Prior involvement in DoD or government programs + Understanding of cybersecurity principles for control systems + Familiarity with industrial networking protocols (e.g., Modbus, CANbus, NMEA 2000) If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. **Original Posting:** November 18, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. **Pay Range:** Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. **About Leidos** Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ************** . **Pay and Benefits** Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at **************/careers/pay-benefits . **Securing Your Data** Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ***************************** . If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission (******************************* . **Commitment to Non-Discrimination** All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. REQNUMBER: R-00170557 All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Leidos will consider qualified applicants with criminal histories for employment in accordance with relevant Laws. Leidos is an equal opportunity employer/disability/vet.

Team: 52 Engineering Entity: Ingalls Shipbuilding Yes Full-Time Shift: 1st Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: Yes, 10%-25% of the time We're building tomorrow's fleet today With more than 11,000 employees, HII's Ingalls Shipbuilding division is the largest manufacturing employer in Mississippi and a major contributor to the economic growth of Alabama. For nearly 85 years, we've designed, built and maintained amphibious ships, destroyers, and cutters for the U.S. Navy and the U.S. Coast Guard. The largest supplier of U.S. Navy surface combatants, we're simultaneously building four classes of ships and have pioneered the development and production of technologically advanced, highly capable ships for the surface Navy fleet for decades. Think that's cool? Keep reading: The Role Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Must Have 2 Years with Bachelor of Science degree in related field; 0 years of relevant professional experience with a Master's Degree Nice to Have Previous shipbuilding experience is highly desired with experience in 4160V-450V distribution switchboards, 4160V and APS transformers, HVAC/motor controller system design. A qualified candidate should be proficient in Microsoft Office applications, AutoCAD and familiar with SDRL and CDRL development. It is preferred that the candidate has experience in the design and development of power systems and equipment. A current security clearance is also a plus; some travel may be required. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to ************************** and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call ************** for assistance. Press #1 for Ingalls Shipbuilding.

R&P is looking for an experienced Marine Electrician / Technician II to fill a full-time position undertaking a variety of tasks relating to installing, repairing, and troubleshooting electrical and electronic equipment onboard U.S. Navy ships in Pascagoula, MS. This position will involve installing electrical cabling, building various electrical connectors, Installation of hardware and troubleshooting malfunctions in several different electrical and electronic systems. Due to the high amount of risk pertaining to this job, electricians must be first and foremost responsible individuals with great attention to safety precautions. The ideal candidate must also be experienced in different kinds of electrical devices and systems. Responsibilities Coordinate and execute plans of electrical installations for many different electrical and electronic systems such as lighting, announcing, 115VAC/440VAC/24DVC electrical plant equipment, Uninterrupted Power Supply equipment, Audio/Video equipment, Antenna systems and many others Install electrical cabinets, fixtures, and equipment for various electrical systems Install safety and distribution components (e.g., switches, resistors, circuit-breaker panels etc.) Connect wiring in electrical circuits and networks using various MIL-SPEC connectors Pull in cables of various lengths and sizes to accommodate system connections Perform effective troubleshooting to identify hazards or malfunctions and repair/replace damaged equipment Install, tag and band copper cables on various classes of Navy surface vessels. Performing all duties required to layout, fabricate, and install electrical wiring, coaxial cable, onboard Navy vessels. Troubleshooting and testing of copper cables and circuits. Possess skills and abilities to perform the requirements of a shipboard or airframe electrician's trade with little supervision or guidance. Knowing how to read and interpret drawings, specifications, technical manuals, design notices, etc. Knowing and understanding the use of all tools of their trade such as multi-meters, pin crimper's, soldering and expected to accomplish the more complex tasks associated with electrical installation of cable, military circular connectors, panel box and power terminations, etc. Familiar with basic computer skills Familiar with MS-Office programs including Word and Excel. Perform other duties as required which may include, but is not limited to, grinding, chipping, surface prep, and foundation installations Qualifications Must be a Marine Electrician with a minimum of 3-5 years relevant experience working in ship repair onboard US Navy ships (technical education may be substituted for a portion of the experience requirement) Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) Familiarity with NAVY Standard Items preferred Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams. Individual must have a keen attention to detail and be quality metric driven Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance (current active Secret clearance is a plus). Successful completion of Navy “A” School (“C” School is a plus) or successful completion of a Shipyard or commercial Electrical apprenticeship program (recognized shipyard apprentice graduates are a plus). Secret DOD security Clearance preferred Proven experience as an electrician Experience in marine electrical systems Demonstrable ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc) Demonstrate ability to build MIL-SPEC connectors of various types and sizes using both soldering and crimping techniques Ability to read and understand electrical and installation drawings and blueprints Excellent critical thinking and problem-solving ability Excellent physical condition with the ability to lift 50 pounds on your own Willingness to work 2nd shift and weekends if necessary Willingness to travel to various locations in support of ship maintenance availabilities Flexibility with regards to scheduling and planned support due to changes in Navy or shipyard schedules Thorough knowledge of safety procedures and guidelines EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits.

Team: 52 Engineering Entity: Ingalls Shipbuilding Yes Full-Time Shift: 1st Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: Yes, 25%-50% of the time We're building tomorrow's fleet today With more than 11,000 employees, HII's Ingalls Shipbuilding division is the largest manufacturing employer in Mississippi and a major contributor to the economic growth of Alabama. For nearly 85 years, we've designed, built and maintained amphibious ships, destroyers, and cutters for the U.S. Navy and the U.S. Coast Guard. The largest supplier of U.S. Navy surface combatants, we're simultaneously building four classes of ships and have pioneered the development and production of technologically advanced, highly capable ships for the surface Navy fleet for decades. Think that's cool? Keep reading: The Role Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned power and lighting shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, and systems, in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve supplier proposals; review, comment on, adjudicate and approve supplier furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required. Applies advanced technical principles, theories, and concepts. Contributes to the development of new principles and concepts. Work on unusually complex technical problems and provide solutions which are highly innovative and ingenious. Works under consultative direction toward predetermined long-range goals and objectives. Assignments are often self-initiated. Determine and pursue courses of action necessary to obtain desired results. Develops advanced technological ideas and guides their development into a final product. Erroneous decisions or recommendations would typically result in failure to achieve critical organizational objectives and effect the image of the organization technological capability. Serves as organization spokesperson on advanced projects and/or programs. Acts as advisor to management and customers on advanced technical research studies and applications. Some travel required. Must Have 9 Years with Bachelor of Science degree in related field; 7 years of relevant professional experience with a Master's Degree; 4 years of relevant professional experience with a PhD.Nice to Have Senior level expertise regarding Electric Plant, Power Generation and Distribution, 4160V Distribution System, and Power Systems Analysis (Fault Current and Circuit Coordination). Represents HII-Ingalls with customers, suppliers, and industry at large, as the technical lead in the afore mentioned areas. Supports new electrical technology insertion for various HII-Ingalls programs. Serves as the shipyard authority on Power Systems Distribution and Analysis, Ship to Shore Connection, Electric Cable, and leader of innovative development initiatives within Engineering, and with Operations, and provides professional technical mentoring entry and junior level Engineers. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to ************************** and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call ************** for assistance. Press #1 for Ingalls Shipbuilding.

R&P Technologies is looking for Master technical skills and waterfront knowledge under supervision of a Lead Technician Level IV. Provide training to Technician Level II and I personnel. They are responsible for reporting all task completions and production obstacles to their Lead Technician and will be capable of standing in as Lead Technician when required. Ensure that all work performed is in accordance with ship specification requirements while complying with all OSHA, NAVSEA, ABS, local shipyard, and R&P safety policies and procedures. Execute plans of electrical installations to include, but not limited to 115VAC/440VAC/Various VDC equipment, fiber optics, lighting, announcing, RF antennas, audio/video, interior communications and alarms, and network systems. They will operate efficiently in a team environment and demonstrate effective leadership qualities while dealing with junior personnel. Receive mentorship/guidance from Lead Technician or Task Lead for questions on any assigned tasks that are not fully understood. Responsibilities * Execute plans of electrical installations for many different electrical and electronic systems such as lighting, announcing, 115V/440V electrical plant equipment, Uninterrupted Power Supply equipment, Audio/Video equipment, Antenna systems and many others * Install electrical cabinets, fixtures, and equipment for various electrical systems * Install safety and distribution components (e.g., switches, resistors, circuit-breaker panels etc.) * Connect wiring in electrical circuits and networks using various MIL-SPEC connectors * Pull in cables of various lengths and sizes to accommodate system connections * Perform effective troubleshooting to identify hazards or malfunctions and repair/replace damaged equipment * Potentially run shipboard availabilities with a small crew. * Learn Microsoft Office, Microsoft Project, and Adobe Acrobat DC. Qualifications * Must be a Marine Electrician with a minimum of 3-5 years relevant experience working in ship repair onboard US Navy ships (technical education may be substituted for a portion of the experience requirement) * Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) * Must be familiar with NAVY Standard Items * Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams. * Individual must have a keen attention to detail and be quality metric driven * Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance (current active Secret clearance is a plus). * Fluency in English (verbal and written) * Successful completion of Navy "A" School ("C" School is a plus) or successful completion of a Shipyard or commercial Electrical apprenticeship program (recognized shipyard apprentice graduates are a plus). * Secret DOD security Clearance preferred * Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) * Shipyard competent person certification a plus * Proven experience as an electrician * Experience in marine electrical systems * Prior experience supervising other personnel * Demonstrable ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc.) * Demonstrate ability to build MIL-SPEC connectors of various types and sizes using both soldering and crimping techniques * Ability to read and understand electrical and installation drawings and blueprints * Excellent critical thinking and problem-solving ability * Excellent physical condition with the ability to lift 50 pounds on your own * Willingness to travel to various locations in support of ship maintenance availabilities * Flexibility with regards to scheduling and planned support due to constant Navy movement * Thorough knowledge of safety procedures and guidelines * Valid Security Clearance, or the ability to qualify and maintain one EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits. Exact salary will be commensurate with experience and qualifications. Qualifications Secret

This position will be responsible for seeking lighting sales opportunities, designing, engineering, overseeing construction, and supporting large commercial and "greenfield" lighting projects in the 23 Counties that Mississippi Power serves. The North Engineer will cover the 17 Northern counties (Marion, Lamar, Forrest, Perry, Greene, Jefferson Davis, Covington, Jones, Wayne, Smith, Jasper, Clarke, Scott, Newton, Lauderdale, Leake, and Neshoba). The position will be required to live within or near the 17 counties and report to the nearest office location in Hattiesburg, Laurel, or Meridian. The South Engineer will cover the 6 Coastal counties (Hancock, Harrison, Jackson, Greene, Pearl River, and Stone). The position will be required to live within or near the 6 counties and report to the office located in Gulfport. Job Responsibilities: + Work closely with internal and external stakeholders to stay engaged in community developments to proactively generate profitable lighting sales + Identify lighting sales opportunities and manage opportunity pipeline + Provide various lighting design layouts and proposals to customers inside and outside of MPC service territory + Work closely with lighting vendors to provide photometric and material quotes + Design and estimate major lighting projects using Job Estimating Tracking System (JETS) + Serve as lead engineer for the Northern lighting team providing voltage calculations, operational technical expertise, training, and support + Assist lighting lines specialists with effectively coordinating NESC and NEC lighting jobs + Assist with packaging responses to bid packages for lighting installations + Attend appropriate industry and system committees and working groups as identified + Serve as technical interface with other departments + Assume storm restoration role as needed Job Experience and Education: + A Bachelor's degree in engineering from an ABET accredited institution is required + Minimum 2 years of experience in engineering, design, and construction of distribution electrical system or street and area lighting systems is required + Industry sales experience is desired Knowledge, Skills, and Abilities: + Knowledge of distribution equipment (identification of poles, transformers, wire sizes, switches etc.) + Knowledge and experience in SoCo applications such as JETS, CSS, DistGIS, SOCKET, CAMP and other related engineering software used to prepare lighting workorders + Excellent oral and written communication skills + Proven knowledge of National Electrical Safety Code, National Electrical Code, Southern Company Distribution Specifications, MPC Safety Rule Book, MPC O&M Procedures and applicable compliance policies + Working knowledge of Microsoft Office (Word, Excel, etc.) + Ability to effectively communicate and work well with internal customers and external (Lighting, Power Delivery, customer service, vendors, developers, consultants, city and state agencies and others) + Proven project management skills involving multiple major projects + Proven ability to manage and prioritize multiple tasks + Knowledge of distribution material and electrical theory + Excellent problem-solving skills + Proficiency in reading and interpreting plans, drawings, and specifications + Strong interpersonal skills with an emphasis on building positive relationships with peers, other departments, and customers Behavioral Attributes: + Demonstrate Our Values and Safety First + Demonstrates self-awareness, integrity, and ethical behavior + Values and facilitates diversity + Leads by example + Highly self-motivated + Strong emotional intelligence + Customer focused, able to work in diverse team environments, and possess a service mentality Mississippi Power , a subsidiary of Southern Company, provides clean, safe, reliable, and affordable energy to more than 192,000 customers and communities in 23 southeast Mississippi counties. For over 100 years, Mississippi Power is a leader in customer service, workforce development and education, environmental stewardship, and employee volunteerism. The company is an industry leader when it comes to working safely, providing around-the-clock reliable service and its expert storm response. Mississippi Power has been at the forefront of innovation in the state through strategic partnerships in electric transportation and solar energy. The company has worked with the Coast Transit Authority to put the state's first electric public transportation bus in operation and with Forrest County Agriculture High School on the state's first electric school bus. It also partnered with the Hattiesburg Zoo on a new electric train and worked with the country's largest Domino's franchise to electrify its delivery fleet. Also, a leader in renewable energy, Mississippi Power partnered with the Naval Construction Battalion Center to install the first microgrid at a Navy facility. The company was among the first to introduce utility scale solar in the state with nearly 160 MW of renewable energy produced, enough to power 23,000 homes for a year. Mississippi Power's mission is to provide world-class value to our customers and communities every day. Southern Company (NYSE: SO ) is a leading energy provider serving 9 million customers across the Southeast and beyond through its family of companies. Providing clean, safe, reliable and affordable energy with excellent service is our mission. The company has electric operating companies in three states, natural gas distribution companies in four states, a competitive generation company, a leading distributed energy solutions provider with national capabilities, a fiber optics network and telecommunications services. Through an industry-leading commitment to innovation, resilience and sustainability, we are taking action to meet customers' and communities' needs while advancing our goal of net-zero greenhouse gas emissions by 2050. Our uncompromising values ensure we put the needs of those we serve at the center of everything we do and are the key to our sustained success. We are transforming energy into economic, environmental and social progress for tomorrow. Our corporate culture has been recognized by a variety of organizations, earning the company awards and recognitions that reflect Our Values and dedication to service. To learn more, visit *********************** . Southern Company invests in the well-being of its employees and their families through a comprehensive total rewards strategy that includes competitive base salary, annual incentive awards for eligible employees and health, welfare and retirement benefits designed to support physical, financial, and emotional/social well-being. This position may also be eligible for additional compensation, such as an incentive program, with the amount of any bonus/awards subject to the terms and conditions of the applicable incentive plan(s). A summary of the benefits offered for this position can be found here **************************************************** . Additional and specific details about total compensation and benefits will also be provided during the hiring process. Southern Company is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. Job Identification: 15893 Job Category: Engineering Job Schedule: Full time Company: Mississippi Power

Job Description Project Engineer Employment Type: Full Time, Salaried Exempt Experience Level: Entry to Mid-Level, zero to three years A growing Atlanta based construction firm is seeking a motivated Project Engineer who wants to build a long-term career in commercial construction. This role is ideal for someone who wants hands on learning, exposure to both field and office operations, and a clear path toward becoming an Assistant Project Manager and eventually a Project Manager. Project Engineer is the operational support hub for the project team. You will manage documentation, coordinate with the design team, support procurement, assist with financial tasks, and maintain regular job site engagement. This is a learning centered role with direct mentorship from experienced Project Managers and Superintendents. Key Responsibilities Document Control and Information Management • Manage submittals, review shop drawings for compliance, and coordinate approvals with the design team • Draft and process RFIs and track responses to support field operations • Prepare agendas and detailed meeting minutes for OAC and internal meetings Project Management and Procurement Support • Assist with subcontractor buyout, scope review, material procurement • Track lead times and delivery schedules to maintain project flow • Support monthly pay applications, invoice coding, change order pricing, and other financial tasks • Lead the project closeout process by collecting warranties, manuals, and as built documents Field Support and Quality Control • Walk the job site regularly with the Superintendent to understand sequencing and verify progress • Document safety observations and support quality control checks • Manage the punch list process and coordinate subcontractors to complete final items • Maintain organized photo documentation using Procore or similar software Qualifications • Bachelor's degree in Construction Management, Civil Engineering, Architecture, or related field • Zero to three years of commercial construction experience such as internships, co-ops, or entry level roles • Proficiency with Microsoft Excel, Microsoft Project, and Bluebeam Revu • Familiarity with Procore or similar construction management software is a plus • Strong written communication skills and attention to detail • Eagerness to learn, willingness to ask questions, and a proactive mindset Work Environment and Physical Requirements • Hybrid work setting that includes office work and active job site presence • Ability to walk job sites, climb temporary stairs, and wear PPE • Ability to occasionally lift up to twenty pounds Compensation and Benefits Competitive salary, performance bonuses, medical, dental, vision, 401K, and a clear professional growth pathway. You will receive hands on mentorship and opportunities to advance quickly within the organization.

THE COMPANY At BiOrigin Specialty Products, our mission is to drive innovative solutions in alignment with our strategic partners to revolutionize the paper and tissue industry. We hold fast in our core values which are the fabric of our culture and the pillars in which we build our community; teamwork, employee investment, integrity, problem solving, and trust. SUMMARY The Electrical, Instrumentation and Controls Technician is distinguished from the Electrical and Instrument Technician in that the Electrical, Instrumentation and Controls Technician will also provide a high level of technical support to the control system equipment, system software, and application software that controls the process. This position will work closely with other maintenance personnel and operations to identify and resolve problems within the specified limits. ESSENTIAL DUTIES AND RESPONSIBILITIES Electrical Instrumentation Responsible for safe work practices ensuring accident-free work environment. Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational testing of mechanical, structural, or electrical equipment. Translates test data by performing the following duties. Plans layout, installs, and repairs wiring, electrical fixtures, apparatus, and control equipment by performing the following duties. Must have a firm understanding of instrumentation (pneumatic 0-10V, 4-20mA). Selects, installs, calibrates, and checks sensing, telemetering, and recording instrumentation and circuitry, and develops specifications for nonstandard apparatus according to engineering data, characteristics of equipment under test, and capabilities of procurable test apparatus. Sketches and builds or modifies fixtures, instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel. Performs preventive and corrective maintenance of test apparatus and peripheral equipment. Operates test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions such as vibration, stress, temperature, humidity, pressure, altitude, and acceleration. Analyzes and converts test data to usable form and prepares graphs and written reports to translate test results. Uses computerized equipment and software to perform testing functions and produce graphs. Requires strong AC/DC drive, PLC and relay logic troubleshooting skills. Plan new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes. Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Installs, terminates, and tests all raceway, wiring, connections and equipment necessary for any industrial controls components. Pulls wiring through conduit. Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement. Repairs/replaces faulty equipment or systems. Practices good housekeeping techniques ensuring a safe work environment. Other duties as assigned Controls Improves existing controls, streamline operator tasks, increases machine productivity and troubleshoots as needed for ongoing issues. Utilizes DCS engineering stations to maintain and modify machine control logic, human machine interfaces, control hardware and machine communication networks. Ensures all machine control system device programs and settings are backed up on a regular basis to a known and readily available central location. Maintains all electrical schematics to ensure changes are recorded and that all library copies are accurate and available to all members of the E&I department. Assist with developing data acquisition historian reports and trends. Also, perform historian system maintenance. Perform resource functions for E&I technicians, including scoping, engineering and ordering parts, as needed. Maintains and troubleshoots all machine instrumentation and electrical systems up to 4200 VAC, as needed. Configure, troubleshoot and repair motor control centers, variable frequency drives and soft-starts up to 4160 Volt. Installation, calibration and troubleshooting of pressure, level, flow, temperature, consistency, conductivity, turbidity and pH transmitters. Tuning of process control loops and machine control systems. Programming and troubleshooting of DCS, PLC and HMI interfaces. Perform configuration and logic modifications to DCS and PLC control systems. Modifications will include programming in ladder logic, block logic. sequential logic and statement logic. Troubleshoot and diagnose configuration and implementation of integrated and stand-alone graphic human machine interfaces. Troubleshoot and diagnose specification of communication protocols, including Profibus, serial and industrial Ethernet. Design and implement process control strategies including regulatory control, control sequence, logic, and advanced control for both continuous and batch processes Develop, modify, and enhance HMI Monitor control system performance, which includes loop analysis and tuning Implement new control system technology Support process problem solving by identifying sources of process upsets and other anomalies Develop and maintain alarm systems Support capital projects. Must be able to support development of project justification and manage a capital project or sub-project related to process controls QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Five (5) years of journey-level experience in programming of PLCs, electrical and/or electronic instrumentation maintenance and repair. Ability to demonstrate adequate working knowledge of PLC troubleshooting and diagnostics through a hands-on test and/or a written test that may require certification. Good working knowledge of Distributed Control Systems (DCS) Experience with Programmable Logic Controllers (Allen Bradley PLC5 and ControLogix) is a plus. Firm foundation in industrial process knowledge. Pulp and Paper desired Experience with instrumentation and electrical systems associated with process control systems. Excellent computer skills - particularly Microsoft including Outlook, Excel, Word, Project, Power point Understand P&ID drawings, loop sheets, and motor elementaries and can create these drawings as necessary to support project work and to maintain existing drawing using AutoCad or equivalent drawing tools Regular attendance is an essential function. Effective communication and interpersonal skills are required. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of employees and managers. MATHEMATICAL SKILLS Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS Completion of an electrical apprenticeship program, with Journeyman Card, plus four years' experience or eight years of verifiable experience through NCCER Certification or previous employer references. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee must frequently lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.\par WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions, moving mechanical parts, and vibration. The employee is frequently exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme heat; and risk of electrical shock. The noise level in the work environment is usually loud. What you get from us: Medical insurance Dental and Vision insurance Prescription Drug Benefit Disability insurance Life insurance 401(k) with company match Health Savings account Paid time off and Paid Holidays Paid Parental Leave Tuition Reimbursement Student Loan Reimbursement BiOrigin Specialty Products provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. As a frontrunner in eco-friendly specialty paper, packaging, and tissue, we're not just a trusted wholesale supplier; we're the pioneers of sustainability. Join us as we continue to thrive, grow, and manufacture some of the most outstanding sustainable paper and tissue products in North America.

THE COMPANY At BiOrigin Specialty Products, our mission is to drive innovative solutions in alignment with our strategic partners to revolutionize the paper and tissue industry. We hold fast in our core values which are the fabric of our culture and the pillars in which we build our community; teamwork, employee investment, integrity, problem solving, and trust. SUMMARY The Electrical, Instrumentation and Controls Technician is distinguished from the Electrical and Instrument Technician in that the Electrical, Instrumentation and Controls Technician will also provide a high level of technical support to the control system equipment, system software, and application software that controls the process. This position will work closely with other maintenance personnel and operations to identify and resolve problems within the specified limits. ESSENTIAL DUTIES AND RESPONSIBILITIES Electrical Instrumentation Responsible for safe work practices ensuring accident-free work environment. Devises, selects, sets up, and operates electronic instrumentation and related electromechanical or electrohydraulic apparatus used for operational testing of mechanical, structural, or electrical equipment. Translates test data by performing the following duties. Plans layout, installs, and repairs wiring, electrical fixtures, apparatus, and control equipment by performing the following duties. Must have a firm understanding of instrumentation (pneumatic 0-10V, 4-20mA). Selects, installs, calibrates, and checks sensing, telemetering, and recording instrumentation and circuitry, and develops specifications for nonstandard apparatus according to engineering data, characteristics of equipment under test, and capabilities of procurable test apparatus. Sketches and builds or modifies fixtures, instruments and related apparatus, and verifies dimensional and functional acceptability of devices fabricated by craft or technical personnel. Performs preventive and corrective maintenance of test apparatus and peripheral equipment. Operates test apparatus during test cycle to produce, regulate, and record effects of actual or simulated conditions such as vibration, stress, temperature, humidity, pressure, altitude, and acceleration. Analyzes and converts test data to usable form and prepares graphs and written reports to translate test results. Uses computerized equipment and software to perform testing functions and produce graphs. Requires strong AC/DC drive, PLC and relay logic troubleshooting skills. Plan new or modified installations to minimize waste of materials, provide access for future maintenance, and avoid unsightly, hazardous, and unreliable wiring, consistent with specifications and local electrical codes. Prepares sketches showing location of wiring and equipment, or follows diagrams or blueprints, ensuring that concealed wiring is installed before completion of future walls, ceilings, and flooring. Installs, terminates, and tests all raceway, wiring, connections and equipment necessary for any industrial controls components. Pulls wiring through conduit. Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement. Repairs/replaces faulty equipment or systems. Practices good housekeeping techniques ensuring a safe work environment. Other duties as assigned Controls Improves existing controls, streamline operator tasks, increases machine productivity and troubleshoots as needed for ongoing issues. Utilizes DCS engineering stations to maintain and modify machine control logic, human machine interfaces, control hardware and machine communication networks. Ensures all machine control system device programs and settings are backed up on a regular basis to a known and readily available central location. Maintains all electrical schematics to ensure changes are recorded and that all library copies are accurate and available to all members of the E&I department. Assist with developing data acquisition historian reports and trends. Also, perform historian system maintenance. Perform resource functions for E&I technicians, including scoping, engineering and ordering parts, as needed. Maintains and troubleshoots all machine instrumentation and electrical systems up to 4200 VAC, as needed. Configure, troubleshoot and repair motor control centers, variable frequency drives and soft-starts up to 4160 Volt. Installation, calibration and troubleshooting of pressure, level, flow, temperature, consistency, conductivity, turbidity and pH transmitters. Tuning of process control loops and machine control systems. Programming and troubleshooting of DCS, PLC and HMI interfaces. Perform configuration and logic modifications to DCS and PLC control systems. Modifications will include programming in ladder logic, block logic. sequential logic and statement logic. Troubleshoot and diagnose configuration and implementation of integrated and stand-alone graphic human machine interfaces. Troubleshoot and diagnose specification of communication protocols, including Profibus, serial and industrial Ethernet. Design and implement process control strategies including regulatory control, control sequence, logic, and advanced control for both continuous and batch processes Develop, modify, and enhance HMI Monitor control system performance, which includes loop analysis and tuning Implement new control system technology Support process problem solving by identifying sources of process upsets and other anomalies Develop and maintain alarm systems Support capital projects. Must be able to support development of project justification and manage a capital project or sub-project related to process controls QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Five (5) years of journey-level experience in programming of PLCs, electrical and/or electronic instrumentation maintenance and repair. Ability to demonstrate adequate working knowledge of PLC troubleshooting and diagnostics through a hands-on test and/or a written test that may require certification. Good working knowledge of Distributed Control Systems (DCS) Experience with Programmable Logic Controllers (Allen Bradley PLC5 and ControLogix) is a plus. Firm foundation in industrial process knowledge. Pulp and Paper desired Experience with instrumentation and electrical systems associated with process control systems. Excellent computer skills - particularly Microsoft including Outlook, Excel, Word, Project, Power point Understand P&ID drawings, loop sheets, and motor elementaries and can create these drawings as necessary to support project work and to maintain existing drawing using AutoCad or equivalent drawing tools Regular attendance is an essential function. Effective communication and interpersonal skills are required. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of employees and managers. MATHEMATICAL SKILLS Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS Completion of an electrical apprenticeship program, with Journeyman Card, plus four years' experience or eight years of verifiable experience through NCCER Certification or previous employer references. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee must frequently lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.\par WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions, moving mechanical parts, and vibration. The employee is frequently exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme heat; and risk of electrical shock. The noise level in the work environment is usually loud. What you get from us: Medical insurance Dental and Vision insurance Prescription Drug Benefit Disability insurance Life insurance 401(k) with company match Health Savings account Paid time off and Paid Holidays Paid Parental Leave Tuition Reimbursement Student Loan Reimbursement BiOrigin Specialty Products provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. As a frontrunner in eco-friendly specialty paper, packaging, and tissue, we're not just a trusted wholesale supplier; we're the pioneers of sustainability. Join us as we continue to thrive, grow, and manufacture some of the most outstanding sustainable paper and tissue products in North America.

Job Description Are we the road to your future? We are currently searching for an experienced Roadway Project Engineer to support our West Gulf Region located in Gulfport, Hattiesburg, Jackson, or Starkville, MS. Candidates must be willing to relocate to Mississippi if out of state. To be considered for this position, applicants must have, at minimum, 3 years relevant experience in roadway design. What you'll be doing: Familiarity with calculating plans quantities and engineering estimates, developing construction specifications, and coordinating with subconsultants Leading or assisting in the development of project designs and directing EIs and designers to successfully execute and deliver project work, while implementing client focused strategies Applying established and well-defined engineering techniques, procedures, policies or standards Prepares and modifies reports, specifications, plans, construction schedules, and designs for projects Aspires to work in a team environment and is willing to participate in business development efforts and meetings with clients. Work as part of a team delivering a range of transportation and civil design projects Participates in ongoing development, communication and implementation of team concepts, programs and policies. Coordinates work to ensure best practices with all team members Attends appropriate team meetings Work on detailed engineering assignments including calculations and relatively standard work activities Adjusts and correlates data, recognizes discrepancies in results Identify and analyze problems using reasoning to arrive at conclusions Apply standard practices and techniques to accomplish work assignments Understands and adheres to assigned phase and task schedules and budgets to ensure timely and cost-effective completion of project Adheres to company standards for quality assurance and quality control as defined in the quality manual What you need to have: BS in Civil Engineering from an accredited four-year college or university 3-6 years relevant experience in roadway design Must have proven skills in meeting DOT expectations, schedules and budgets MDOT experience is preferred but not required PE is preferred (Mississippi PE highly preferred) Experienced in DOT design methods, plan preparation, standards, and specifications Proficient with OpenRoads Designer Strong interpersonal and communication skills Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role Valid driver's license A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: Employee Stock Ownership Plan (ESOP) Medical, Dental, & Vision 401(k) retirement savings plan + employer matching Paid Time Off (PTO) and holidays Employer-Paid Life/AD&D insurance Employer-Paid short-term disability and long-term disability Wellness incentives Student Debt Retirement Match Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” - Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 MS Mississippi

Job Description can be located at our Bayou La Batre, AL shipyard or our New Orleans Office (travel required between both) Join the Birdon team and be a part of growth! Our Controls Engineer will be an integral piece of our work on a daily basis. Some of your daily functions will include: Support the C5I GM as required in the delivery of cross-functional control systems (Systems Engineering, Electrical Engineering, Instrumentation and Control Systems, Cyber System Architectures) Provide engineering services for a broad spectrum of controls capabilities for marine HM&E systems Assist with design and integration efforts of control systems & technologies across maritime platforms Participate in the coordination of technical and assessment activities internal and external to the Waterways Commerce Cutter (WCC) Program Systems Integration Laboratory (SIL), including program, engineering, and IS&T disciplines, SMEs, suppliers, and Birdon customers and other US Government agencies/regulations as required Develop specifications and design artifacts to achieve engineering and cybersecurity (CS) deliverables such as drawings, specifications, network architectures, system interfaces, and network system configurations Participate in development and implementation of improvement and recovery plans and ensure they are issued, tracked, and reported on as required for supply base management and improvement Create design presentations and brief customers as needed on behalf of government sponsors. Draft technical reports such as site surveys, test procedures, test reports, trade studies, and white papers. Write and support executive level papers/briefs for submission. If you have a post High School education in Controls and/or Systems Engineering and 5-10 years' experience in control system design and integration, we want to talk to you! Birdon is committed to the HEALTH and SAFETY of our workforce and to the ENVIRONMENT, we expect this same commitment from all employees. Birdon America Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Know Your Rights The Company invites any applicant and/or employee to review the Company's written Affirmative Action Plan. This plan is available for inspection upon request by emailing ************ . If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact ************ for further assistance.

CDM Smith is seeking a dynamic Electrical Engineer to join our team of forward-thinking experts. You'll design high-performance systems that drive infrastructure resilience, energy innovation, and technical excellence across industries. From power grids to smart facilities, your work will electrify progress. Design and develop electrical systems from foundational to highly complex-including electric master system plans, power systems, protection and generation models, facility power infrastructure, and renewable energy solutions. Perform advanced studies and calculations for power distribution, lighting simulations and layouts, communications, fire alarm, and security systems. Develop white papers and technical documentation to support CDM Smith's Technical Knowledge Management (TKM) program. Conduct field reviews to ensure alignment between design specifications and site conditions; update designs as needed. Collaborate with sales staff to shape winning proposals and respond to client RFPs. Review proposals for compliance with industry standards and regulatory requirements. Engage directly with current and prospective clients to understand and plan for future design needs. Represent the firm at industry conferences and events, enhancing both your visibility and ours. Mentor junior engineers and contribute to their technical growth and project success. Provide guidance and may oversee the work of junior team members to ensure quality and consistency. **Job Title:** Electrical Engineer (Substation) **Group:** IND **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline. Professional engineering (PE) license. 7 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree. **Preferred Qualifications:** Experience leading substation engineering projects through 345kV. Proficiency in protective relay schemes and creating relay schematics/wiring diagrams. Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware. Familiarity with NESC and NEC standards. Knowledge of substation grounding grid design and lightning protection systems. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 10% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** Working knowledge of CADD software, including 3D and 4D design tools. Expert understanding of engineering design principles and standards. Proficiency in Microsoft Office applications, especially Excel and Word. Excellent written and verbal communication skills. Strong knowledge of federal, state, and local regulations relevant to electrical design. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $90,605 **Pay Range Maximum:** $158,579 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Hybrid Work Options may be considered for successful candidate. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Leidos is seeking a highly skilled Electrical Engineer to join our Maritime Systems Division in Long Beach, MS. This role supports the development and integration of advanced shipboard marine power systems for next-generation manned and unmanned maritime platforms. The ideal candidate will bring hands-on experience in marine electrical systems and proficiency in AutoCAD for schematic and layout design. The ideal candidate will contribute to both new designs and legacy system upgrades for vessels used in commercial, industrial, or defense applications. Experience with harsh environmental considerations, compliance with marine standards, and hands-on commissioning is essential. Key Responsibilities Design and develop shipboard electrical power systems, including AC/DC distribution, switchgear, and control systems Create and modify electrical schematics and layouts using AutoCAD Ensure compliance with applicable standards such as ABS, DNV, IEEE, USCG, and IMO regulations Collaborate with multidisciplinary teams to integrate subsystems into maritime platforms Support prototype development, testing, and field deployment Conduct verification and validation activities for marine electrical systems Prepare detailed technical documentation, including test plans and reports Troubleshoot and optimize existing systems to improve reliability and performance Required Qualifications Bachelor's degree in Electrical Engineering or related field 5+ years of professional experience in electrical engineering Proficiency in AutoCAD for electrical design and documentation Strong understanding of analog/digital circuit design and power distribution Willingness to travel for field testing and integration Strong written and verbal communication skills Ability to obtain and maintain a DoD Secret clearance Preferred Qualifications Knowledge of shipboard and marine electrical systems Familiarity with PLCs (Siemens, Allen-Bradley, etc.), SCADA, and embedded control systems Familiarity with Altium Designer or similar PCB design and layout tools Knowledge of MIL-STD electrical design practices Prior experience supporting DoD or naval programs Knowledge of cybersecurity principles as applied to industrial control systems and automation environments Familiarity with shipboard networking protocols (NMEA 2000, Modbus, CANbus) SUBSEAMSS Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don't wear capes (they're a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for “how it's always been done.” Original Posting:July 21, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $85,150.00 - $153,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

R&P Technologies is looking for Master technical skills and waterfront knowledge under supervision of a Lead Technician Level IV. Provide training to Technician Level II and I personnel. They are responsible for reporting all task completions and production obstacles to their Lead Technician and will be capable of standing in as Lead Technician when required. Ensure that all work performed is in accordance with ship specification requirements while complying with all OSHA, NAVSEA, ABS, local shipyard, and R&P safety policies and procedures. Execute plans of electrical installations to include, but not limited to 115VAC/440VAC/Various VDC equipment, fiber optics, lighting, announcing, RF antennas, audio/video, interior communications and alarms, and network systems. They will operate efficiently in a team environment and demonstrate effective leadership qualities while dealing with junior personnel. Receive mentorship/guidance from Lead Technician or Task Lead for questions on any assigned tasks that are not fully understood. Responsibilities Execute plans of electrical installations for many different electrical and electronic systems such as lighting, announcing, 115V/440V electrical plant equipment, Uninterrupted Power Supply equipment, Audio/Video equipment, Antenna systems and many others Install electrical cabinets, fixtures, and equipment for various electrical systems Install safety and distribution components (e.g., switches, resistors, circuit-breaker panels etc.) Connect wiring in electrical circuits and networks using various MIL-SPEC connectors Pull in cables of various lengths and sizes to accommodate system connections Perform effective troubleshooting to identify hazards or malfunctions and repair/replace damaged equipment Potentially run shipboard availabilities with a small crew. Learn Microsoft Office, Microsoft Project, and Adobe Acrobat DC. Qualifications Must be a Marine Electrician with a minimum of 3-5 years relevant experience working in ship repair onboard US Navy ships (technical education may be substituted for a portion of the experience requirement) Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) Must be familiar with NAVY Standard Items Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams. Individual must have a keen attention to detail and be quality metric driven Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance (current active Secret clearance is a plus). Fluency in English (verbal and written) Successful completion of Navy “A” School (“C” School is a plus) or successful completion of a Shipyard or commercial Electrical apprenticeship program (recognized shipyard apprentice graduates are a plus). Secret DOD security Clearance preferred Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) Shipyard competent person certification a plus Proven experience as an electrician Experience in marine electrical systems Prior experience supervising other personnel Demonstrable ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc.) Demonstrate ability to build MIL-SPEC connectors of various types and sizes using both soldering and crimping techniques Ability to read and understand electrical and installation drawings and blueprints Excellent critical thinking and problem-solving ability Excellent physical condition with the ability to lift 50 pounds on your own Willingness to travel to various locations in support of ship maintenance availabilities Flexibility with regards to scheduling and planned support due to constant Navy movement Thorough knowledge of safety procedures and guidelines Valid Security Clearance, or the ability to qualify and maintain one EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits. Exact salary will be commensurate with experience and qualifications.

R&P is looking for an experienced Marine Electrician / Technician II to fill a full-time position undertaking a variety of tasks relating to installing, repairing, and troubleshooting electrical and electronic equipment onboard U.S. Navy ships in Pascagoula, MS. This position will involve installing electrical cabling, building various electrical connectors, Installation of hardware and troubleshooting malfunctions in several different electrical and electronic systems. Due to the high amount of risk pertaining to this job, electricians must be first and foremost responsible individuals with great attention to safety precautions. The ideal candidate must also be experienced in different kinds of electrical devices and systems. Responsibilities * Coordinate and execute plans of electrical installations for many different electrical and electronic systems such as lighting, announcing, 115VAC/440VAC/24DVC electrical plant equipment, Uninterrupted Power Supply equipment, Audio/Video equipment, Antenna systems and many others * Install electrical cabinets, fixtures, and equipment for various electrical systems * Install safety and distribution components (e.g., switches, resistors, circuit-breaker panels etc.) * Connect wiring in electrical circuits and networks using various MIL-SPEC connectors * Pull in cables of various lengths and sizes to accommodate system connections * Perform effective troubleshooting to identify hazards or malfunctions and repair/replace damaged equipment * Install, tag and band copper cables on various classes of Navy surface vessels. * Performing all duties required to layout, fabricate, and install electrical wiring, coaxial cable, onboard Navy vessels. * Troubleshooting and testing of copper cables and circuits. * Possess skills and abilities to perform the requirements of a shipboard or airframe electrician's trade with little supervision or guidance. * Knowing how to read and interpret drawings, specifications, technical manuals, design notices, etc. * Knowing and understanding the use of all tools of their trade such as multi-meters, pin crimper's, soldering and expected to accomplish the more complex tasks associated with electrical installation of cable, military circular connectors, panel box and power terminations, etc. * Familiar with basic computer skills * Familiar with MS-Office programs including Word and Excel. * Perform other duties as required which may include, but is not limited to, grinding, chipping, surface prep, and foundation installations Qualifications * Must be a Marine Electrician with a minimum of 3-5 years relevant experience working in ship repair onboard US Navy ships (technical education may be substituted for a portion of the experience requirement) * Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) * Familiarity with NAVY Standard Items preferred * Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams. * Individual must have a keen attention to detail and be quality metric driven * Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance (current active Secret clearance is a plus). * Successful completion of Navy "A" School ("C" School is a plus) or successful completion of a Shipyard or commercial Electrical apprenticeship program (recognized shipyard apprentice graduates are a plus). * Secret DOD security Clearance preferred * Proven experience as an electrician * Experience in marine electrical systems * Demonstrable ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc) * Demonstrate ability to build MIL-SPEC connectors of various types and sizes using both soldering and crimping techniques * Ability to read and understand electrical and installation drawings and blueprints * Excellent critical thinking and problem-solving ability * Excellent physical condition with the ability to lift 50 pounds on your own * Willingness to work 2nd shift and weekends if necessary * Willingness to travel to various locations in support of ship maintenance availabilities * Flexibility with regards to scheduling and planned support due to changes in Navy or shipyard schedules * Thorough knowledge of safety procedures and guidelines EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits. Qualifications Secret

This position will be responsible for seeking lighting sales opportunities, designing, engineering, overseeing construction, and supporting large commercial and “greenfield” lighting projects in the 23 Counties that Mississippi Power serves. The North Engineer will cover the 17 Northern counties (Marion, Lamar, Forrest, Perry, Greene, Jefferson Davis, Covington, Jones, Wayne, Smith, Jasper, Clarke, Scott, Newton, Lauderdale, Leake, and Neshoba). The position will be required to live within or near the 17 counties and report to the nearest office location in Hattiesburg, Laurel, or Meridian. The South Engineer will cover the 6 Coastal counties (Hancock, Harrison, Jackson, Greene, Pearl River, and Stone). The position will be required to live within or near the 6 counties and report to the office located in Gulfport. Job Responsibilities: Work closely with internal and external stakeholders to stay engaged in community developments to proactively generate profitable lighting sales Identify lighting sales opportunities and manage opportunity pipeline Provide various lighting design layouts and proposals to customers inside and outside of MPC service territory Work closely with lighting vendors to provide photometric and material quotes Design and estimate major lighting projects using Job Estimating Tracking System (JETS) Serve as lead engineer for the Northern lighting team providing voltage calculations, operational technical expertise, training, and support Assist lighting lines specialists with effectively coordinating NESC and NEC lighting jobs Assist with packaging responses to bid packages for lighting installations Attend appropriate industry and system committees and working groups as identified Serve as technical interface with other departments Assume storm restoration role as needed Job Experience and Education: A Bachelor's degree in engineering from an ABET accredited institution is required Minimum 2 years of experience in engineering, design, and construction of distribution electrical system or street and area lighting systems is required Industry sales experience is desired Knowledge, Skills, and Abilities: Knowledge of distribution equipment (identification of poles, transformers, wire sizes, switches etc.) Knowledge and experience in SoCo applications such as JETS, CSS, DistGIS, SOCKET, CAMP and other related engineering software used to prepare lighting workorders Excellent oral and written communication skills Proven knowledge of National Electrical Safety Code, National Electrical Code, Southern Company Distribution Specifications, MPC Safety Rule Book, MPC O&M Procedures and applicable compliance policies Working knowledge of Microsoft Office (Word, Excel, etc.) Ability to effectively communicate and work well with internal customers and external (Lighting, Power Delivery, customer service, vendors, developers, consultants, city and state agencies and others) Proven project management skills involving multiple major projects Proven ability to manage and prioritize multiple tasks Knowledge of distribution material and electrical theory Excellent problem-solving skills Proficiency in reading and interpreting plans, drawings, and specifications Strong interpersonal skills with an emphasis on building positive relationships with peers, other departments, and customers Behavioral Attributes: Demonstrate Our Values and Safety First Demonstrates self-awareness, integrity, and ethical behavior Values and facilitates diversity Leads by example Highly self-motivated Strong emotional intelligence Customer focused, able to work in diverse team environments, and possess a service mentality

CDM Smith is seeking a dynamic Electrical Engineer to join our team of forward-thinking experts. You'll design high-performance systems that drive infrastructure resilience, energy innovation, and technical excellence across industries. From power grids to smart facilities, your work will electrify progress. Design and develop electrical systems from foundational to highly complex-including electric master system plans, power systems, protection and generation models, facility power infrastructure, and renewable energy solutions. Perform advanced studies and calculations for power distribution, lighting simulations and layouts, communications, fire alarm, and security systems. Develop white papers and technical documentation to support CDM Smith's Technical Knowledge Management (TKM) program. Conduct field reviews to ensure alignment between design specifications and site conditions; update designs as needed. Collaborate with sales staff to shape winning proposals and respond to client RFPs. Review proposals for compliance with industry standards and regulatory requirements. Engage directly with current and prospective clients to understand and plan for future design needs. Represent the firm at industry conferences and events, enhancing both your visibility and ours. Mentor junior engineers and contribute to their technical growth and project success. Provide guidance and may oversee the work of junior team members to ensure quality and consistency. **Job Title:** Electrical Engineer (Substation) **Group:** IND **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree in Electrical or Electronic Engineering, or Electrical Technology or related discipline. Professional engineering (PE) license. 7 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree. **Preferred Qualifications:** Experience leading substation engineering projects through 345kV. Proficiency in protective relay schemes and creating relay schematics/wiring diagrams. Expertise in specifying and selecting electrical equipment, including SCADA/RTU hardware. Familiarity with NESC and NEC standards. Knowledge of substation grounding grid design and lightning protection systems. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 10% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** Working knowledge of CADD software, including 3D and 4D design tools. Expert understanding of engineering design principles and standards. Proficiency in Microsoft Office applications, especially Excel and Word. Excellent written and verbal communication skills. Strong knowledge of federal, state, and local regulations relevant to electrical design. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $90,605 **Pay Range Maximum:** $158,579 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Hybrid Work Options may be considered for successful candidate. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

R&P is looking for an experienced Marine Electrician / Technician II to fill a full-time position undertaking a variety of tasks relating to installing, repairing, and troubleshooting electrical and electronic equipment onboard U.S. Navy ships in Pascagoula, MS. This position will involve installing electrical cabling, building various electrical connectors, Installation of hardware and troubleshooting malfunctions in several different electrical and electronic systems. Due to the high amount of risk pertaining to this job, electricians must be first and foremost responsible individuals with great attention to safety precautions. The ideal candidate must also be experienced in different kinds of electrical devices and systems. Responsibilities Coordinate and execute plans of electrical installations for many different electrical and electronic systems such as lighting, announcing, 115VAC/440VAC/24DVC electrical plant equipment, Uninterrupted Power Supply equipment, Audio/Video equipment, Antenna systems and many others Install electrical cabinets, fixtures, and equipment for various electrical systems Install safety and distribution components (e.g., switches, resistors, circuit-breaker panels etc.) Connect wiring in electrical circuits and networks using various MIL-SPEC connectors Pull in cables of various lengths and sizes to accommodate system connections Perform effective troubleshooting to identify hazards or malfunctions and repair/replace damaged equipment Install, tag and band copper cables on various classes of Navy surface vessels. Performing all duties required to layout, fabricate, and install electrical wiring, coaxial cable, onboard Navy vessels. Troubleshooting and testing of copper cables and circuits. Possess skills and abilities to perform the requirements of a shipboard or airframe electrician's trade with little supervision or guidance. Knowing how to read and interpret drawings, specifications, technical manuals, design notices, etc. Knowing and understanding the use of all tools of their trade such as multi-meters, pin crimper's, soldering and expected to accomplish the more complex tasks associated with electrical installation of cable, military circular connectors, panel box and power terminations, etc. Familiar with basic computer skills Familiar with MS-Office programs including Word and Excel. Perform other duties as required which may include, but is not limited to, grinding, chipping, surface prep, and foundation installations Qualifications Must be a Marine Electrician with a minimum of 3-5 years relevant experience working in ship repair onboard US Navy ships (technical education may be substituted for a portion of the experience requirement) Must have experience and multi-pin copper connector certification of cables per Navy Standard Item 009-73 (MIL-STD-2003-5) Familiarity with NAVY Standard Items preferred Ability to read, understand and follow customer work item requirements, drawings, and wiring diagrams. Individual must have a keen attention to detail and be quality metric driven Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance (current active Secret clearance is a plus). Successful completion of Navy “A” School (“C” School is a plus) or successful completion of a Shipyard or commercial Electrical apprenticeship program (recognized shipyard apprentice graduates are a plus). Secret DOD security Clearance preferred Proven experience as an electrician Experience in marine electrical systems Demonstrable ability to use electrical and hand tools (e.g. wire strippers, voltmeter etc) Demonstrate ability to build MIL-SPEC connectors of various types and sizes using both soldering and crimping techniques Ability to read and understand electrical and installation drawings and blueprints Excellent critical thinking and problem-solving ability Excellent physical condition with the ability to lift 50 pounds on your own Willingness to work 2nd shift and weekends if necessary Willingness to travel to various locations in support of ship maintenance availabilities Flexibility with regards to scheduling and planned support due to changes in Navy or shipyard schedules Thorough knowledge of safety procedures and guidelines EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits.