Electrical engineer internship jobs in Lorain, OH - 147 jobs

REAL ALLOY is the market leader in third-party aluminum recycling and specification alloy production. Headquartered in Cleveland, Ohio, we have 17 plants strategically located across the United States, Mexico, and Canada. We convert aluminum scrap and by-products into reusable aluminum metal for a growing number of applications across various industries. We are ideally positioned to respond to the needs of an increasingly recycling-conscious world. Advanced technologies enable us to process a large variety of scrap and dross and reduce the amount of residual waste from aluminum manufacturing that would otherwise end up as landfill. Responsibilities Are you an Electrical Engineer looking for an Intern program to sharpen your skills? Do you have the drive to succeed? This Electrical Engineering SUMMER 2026 Co-Op/Internship is based out of our corporate headquarters in Beachwood, OH but will have the opportunity to travel to our plant facilities within a 4-hour distance to see the benefits of their project work in action. We are open to Co-Op and extension with right candidate. Candidate must be willing to work from the Beachwood location. *** This role is for Junior and Senior level college students *** Development Tasks: AutoCAD Electrical drafting, design and revision updates Introduction AutoCAD Electrical and Orientation Real Alloy Standards and Library Draw from sketch Update Drawing from Field Markups Draw Project Task, Initial Design Apply AutoCAD skills as needed Training on applying power design concepts for Safety requirements for Low Voltage, Controls Power 480VAC Motor Start, Soft Starter and AC Drives 120VAC and 24VDC Controls Emergency Stop and Safety Circuits Training on applying technology design concepts Industrial communications and Ethernet Rockwell PLC Platforms Hardware ControlLogix/CompactLogix/SLC500/MicroLogix and Remote I/O Input & Output Interface to equipment Online Troubleshooting and Support Rockwell Studio 5000 / RS Logix 500 PLC programming Programming Organization Self-Documentation Ignition SCADA/HMI programming Projects Tasks: Assignment of project tasks Design concept Hardware development Co-work with Mechanical Engineering Programming and Testing Communication between Engineering and Plant personnel Project Documentation Deployment Plan Implementation at plant Translation Plan to like in kind equipment Report out to business Potential Projects Combustion Controls Gas and Air Flow Meter HART Integration 480VAC Switchgear Power Equipment Data Integration and Collection into Ignition SCADA Develop Reverberatory Furnace Electrical Drawing set Integration of AC Drives into PLCs and SCADA over Ethernet Qualifications Currently pursuing a BS/MS electrical engineering degree - minimum of 3 years' progress towards a bachelor's degree in electrical engineering Overall GPA of 3.25 or above Ability to travel to job-sites for 1-3 days if needed Ability to read an electrical schematic AutoCad familiarity and/or experience Familiarity with electrical circuits design and operation Familiarity with data collection, analysis, and presentation Knowledge of and/or experience with PLC programming (preferably Allen Bradley) Knowledge of and/or experience with HMI programming The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not construed to be an exhaustive list of all job duties performed by the personnel so classified. Equal Opportunity REAL ALLOY is an equal opportunity employer and supports diversity in the workplace. Qualified applications will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Our HR teams will reach out to the applicants who met the qualifications and most closely aligned with requirements of the positions.

DLR Group is an integrated design firm with a promise to elevate the human experience through design. This fuels the work we do around the world and inspires our mission to improve the lives of our clients, our communities, and our planet. If this sparks your interest, you're in the right place. Our Engineering team has an opening for an Electrical Engineering intern. This is a seasonal position for Summer 2026 and will require approximately 40 hours of work per week in the office. We have multiple positions and locations available. Please refer to all openings posted and apply to the locations that are most suitable to your living situation during the course of your internship. Position Summary: As an Electrical Engineering Intern at DLR Group you will be responsible for assisting in the design process of electrical building systems from schematics through construction administration on a wide range of building types. As part of our integrated design teams you create buildings that elevate the human experience through design. About EPX at DLR Group: As an intern at DLR Group, you will be a part of our Emerging Professional Experience Program. The EPX program provides diverse perspectives on the needs of a design enterprise, and the possibilities for experiences and growth within the design profession. The goal is to provide a strong foundation to build your career on and explore opportunities within the AEC industry. The program is composed of three major components: mentorship, work, and weekly classes. These classes include EP-specific onboarding, design culture, marketing and business development, sustainability, design technology, communication style education, mentoring, resource and project management, construction site opportunities, research, equity, design agency, and career next steps. You will hear from some of our top executives and integrated designers during this time! The successful candidate will: Work with a licensed engineer designing electrical systems for new construction and/or building renovation projects Attend design team meetings with an electrical engineer and observe the coordination that occurs among the team members of a multi-disciplinary design team Assist an electrical engineer with the design and development of construction documents primarily using Revit Visit an active construction site (contingent on the status of local construction projects) Required Qualifications: Enrollment in an ABET-accredited Electrical Engineering or Architectural Engineering program Must be eligible to work in the United States without need for work visa or residency sponsorship Preferred Qualifications: Passed the Fundamentals of Engineering (FE) exam At least a third-year student in an accredited engineering program Interest in architectural building design Experience or interest with BIM (e.g. Autodesk Revit MEP) workflow At least a third-year student in an accredited engineering program Our comprehensive Benefits at DLR Group include medical, dental, vision, disability, wellness programs, flex spending, paid holidays, and paid time off. We also offer a 401(k) plan, employee stock ownership, and bonus opportunities. Compensation considerations are based on location, experience, and skills. The suggested pay range for this position is: Pay Range $20 - $26 USD DLR Group is an integrated design firm delivering architecture, engineering, interiors, planning, and building optimization for new builds, renovations, and adaptive reuse projects. We are 100% employee-owned: every employee is literally invested in our clients' success. At the core of our firm are interdisciplinary teams engaged in every step of project lifecycles. Our teams champion true collaboration, open information sharing, shared risk and reward, value-based decision making, and proficient use of technology to deliver exceptional design. We are pursuing the goals of the 2030 Challenge, the ME2040, and the SE2050, and are an initial signatory of the China Accord and the AIA 2030 Commitment. Through our values - commitment, creativity, environmental stewardship, fun, integrity, ownership, sharing, teamwork - we elevate the human experience through design, together. DLR Group follows a four-day in-office work model, with employees having the flexibility to work somewhere other than the office on Fridays. We are proud to be an Equal Opportunity/Affirmative Action/M/F/Veteran/Disabled employer.

The Department of Electrical, Computer, and Systems Engineering (ECSE) at Case Western Reserve University (CWRU) invites applications for one non-tenure-track faculty position at the Assistant or Associate Professor rank. Appointments will be considered for starting dates as early as July 1, 2026. Appointment rank will ultimately be commensurate with experience. Candidates must have a Ph.D. degree in Electrical Engineering, Computer Engineering, or a closely related field. In compliance with the City of Cleveland's Pay Transparency Ordinance (effective October 27, 2025), the annual starting base salary range for this position is from $90,000 - $101,000. CWRU considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market and organizational considerations when extending an offer. University employees enjoy a comprehensive benefits package that includes excellent healthcare, retirement plans, tuition assistance, and paid time off. All applicants must hold either great promise for (Assistant Professor rank) or great track record in (Associate Professor rank) effective teaching, especially at the undergraduate level, and substantial service/outreach activities. The successful candidate is expected to teach at the undergraduate level in electrical and computer engineering. Priority areas of interest are introductory analog/digital circuits and instruments as well as junior- and senior-level design courses. Depending upon interest and expertise, the successful candidate will also be able to develop new courses at the undergraduate and graduate levels that further enrich the experiential learning opportunities of the students. The candidate is also expected to perform undergraduate student advising, coordinate/lead accreditation-related activities, serve on department- and university-level committees, and represent the department in outreach/recruitment events, as needed.

Job Title: Electrical Design EngineerJob Description Design, develop, and test electrical systems and components for various applications and requirements. Create and interpret technical drawings, schematics, and specifications. Collaborate with cross-functional teams to define project requirements and deliver solutions that meet customer needs. Conduct feasibility studies and cost estimates for proposed projects. Ensure compliance with industry standards, safety regulations, and quality control procedures. Troubleshoot and resolve issues related to electrical systems and components. Stay updated with the latest technological advancements and integrate them into existing and new systems. Prepare comprehensive reports and documentation for internal and external stakeholders. Conduct and participate in internal and external design reviews and technical interchange meetings to assess and guide development activities. Perform trade studies to choose the best solution to meet design requirements. Support production, testing, and operation of fielded equipment. Document engineering drawings, engineering standards, engineering specifications, technical proposals, technical manuals, disclosures, and scientific discoveries. Responsibilities + Design, develop, and test electrical systems and components for diverse applications. + Create and interpret technical drawings, schematics, and specifications. + Collaborate with cross-functional teams to define project requirements. + Conduct feasibility studies and cost estimates for proposed projects. + Ensure compliance with industry standards and safety regulations. + Troubleshoot and resolve electrical system issues. + Stay updated with technological advancements and integrate them into systems. + Prepare comprehensive reports and documentation for stakeholders. + Conduct and participate in design reviews and technical meetings. + Perform trade studies to select optimal solutions for design requirements. + Support production, testing, and operation of equipment. + Document engineering drawings, standards, specifications, and technical manuals. Essential Skills + BS+ in Electrical Engineering or similar field. + Minimum of 5 years' experience in a similar role. + Proven experience in electrical design and development. + Experience with reading, creating, documenting, and testing electrical drawings. + Familiarity with software for electrical design, documentation, and analysis. + Excellent problem-solving skills and attention to detail. + Effective communication and teamwork abilities. + Ability to manage time across multiple projects and meet deadlines. + Capability to apply scientific principles, tools, and techniques for practical results. + Proven ability to apply innovative approaches to designing, integrating, and testing. + Track record of self-motivated project execution. Additional Skills & Qualifications + MS in Electrical Engineering or similar is desired. + Experience with data transmission and link budgets. + Experience with AC, DC, and 3-phase power, power conversion, and transmission. + Experience with cable design and fabrication for power and data transmission. + Experience with electrical drawing standards. + Experience with EPLAN software. + Experience with development and production programs for customer deployments. + Engineering experience with power and data integration of external sensors and systems. + General understanding of electromagnetic interference (EMI) and mitigation techniques. + Experience with hands-on electrical testing and troubleshooting. + Experience with statistical analysis. + Familiarity with programming languages such as structured text (PLC), C, C++, or equivalent. Work Environment The work environment includes a small space in the Air Dock with ground station units set up next to offices. The position offers remote and onsite work flexibility, with the possibility of needing to be onsite daily during certain project stages. Travel requirements are approximately 20%, which may include visits to vendor facilities or aerostat sites. Job Type & Location This is a Contract to Hire position based out of Akron, OH. Pay and Benefits The pay range for this position is $43.27 - $67.31/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in Akron,OH. Application Deadline This position is anticipated to close on Jan 28, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

For nearly five decades, ZIN Technologies (ZIN) has provided integrated products and spaceflight hardware development services to NASA and Fortune 500 companies. ZIN specializes in the seamless and transparent progression between concept, detailed design, engineering, manufacturing, and operations. ZIN, with its uniquely qualified staff, and a proven track record of award winning work, delivers product development, system prototypes, and space flight hardware on time and under budget. ZIN has over 150 scientists, engineers, and technicians engaged in the development of specialized data acquisition and control systems, power converters, and optical-mechanical systems for aerospace and commercial applications. ZIN experience base includes competitively awarded engineering contracts from both government and commercial companies. Our scope of experience includes scientific, technical, operational, and program management, as well as the disciplines associated with large, complex space programs. ZIN Associates are talented, experienced individuals; many have advanced degrees and professional certifications that provide a wealth of knowledge and capabilities to our customers. Operating as a team, we are dedicated to supplying innovative, cost effective services and solutions. Job Description TO BE CONSIDERED, APPLY AT ************************ This position performs schematic capture, layout and implementation of design rules on PCBs of varying complexity. Prepares sketches, block diagrams, wiring diagrams, PCB layout etc. Prepare assembly drawings and BOMs. Works closely with Electrical engineers to apply all inputs and information as required developing final design drawings as appropriate. Must work well with interdisciplinary team. Must work within AS9100 framework and be familiar with Aerospace industry standards. Qualifications U.S. CITIZENSHIP REQUIRED POSSIBLE RELOCATION ASSISTANCE -Ability to collaborate with engineers and program/ project managers to create design drawings, reports and inputs to project schedules. - 3+ years experience with Mentor Graphics or Altium software - Knowledge of IPC-A-600, IPC-A-610, IPC-2221, IPC-222, IPC-6012 and J-STD-001 standards. -Knowledge and use of MS Office products - Experience and knowledge utilizing AutoCAD 2012 is desired Additional Information In addition to competitive salaries, ZIN offers excellent benefits to our associates, including medical, vision, and dental insurance; short- and long-term disability; life insurance; paid leave and paid holidays; 401(k) retirement plan (immediate vesting); education and training reimbursement; professional development opportunities; employee assistance program; flexible spending plans; credit union membership; and direct deposit. ZIN-Technologies, Inc. is an Equal Employment Opportunity Employer M/F/D/V

External Description: Whirlpool is currently seeking a qualified candidates for an Electrical Engineer opening to join our Process Transformation team (PT) located in Clyde, OH. This position will work closely with North American manufacturing facilities and PT Fabrication Engineers to define capital purchases from specification of the new equipment through handoff to the manufacturing facility. This position will identify flexible design and process parameters in order to meet customer needs. Job Number: 65896 Community / Marketing Title: Electrical Engineer Location_formattedLocationLong: Clyde, Ohio US

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. The Electrical Engineer II will serve as an electrical test engineer within the product development team in R&D. This position is primarily responsible for designing, developing, and implementing automated test systems to support new product development and production. The Electrical Engineer II ensures the reliability, accuracy, and compliance of electrical testing processes for PCB assemblies, control systems, wiring harnesses, and integrated electrical systems. This role plays a key part in maintaining high standards for electrical testing throughout the organization. What You'll Do as an Electrical Engineer * Design and implement automated test programs, fixtures, systems, and scripts for NPD and production environments. * Qualify test stations using GRR, SPC, and other statistical analysis tools to ensure accuracy and repeatability. * Define requirements and concepts for test systems, select and evaluate components, create schematics, verify designs, and maintain comprehensive tester documentation including test plans, reports, and work instructions. * Create and maintain test documentation, including test plans, reports, and work instructions. * Collaborate with design and manufacturing teams to diagnose test failures, perform root-cause analysis, and implement corrective actions. * Optimize test processes to reduce cycle time, minimize false failures, and lower cost per test. * Analyze test data, monitor trends, and provide actionable insights to design and quality teams for ongoing product and process improvements. * Ensure all test systems and processes comply with industry standards (IPC, UL, IEC) and meet regulatory requirements. The Experience, Abilities and Skills Needed * Bachelor of Electrical/Electronic Engineering degree (EE/EET) (ABET accredited college/university is preferred * 3+ years of related electrical engineering experience * Proficiency with electrical engineering tools (Excel, Visio/AutoCAD/EPLAN, Altium/OrCad, SPICE). * Experience with basic lab instruments (DMM, oscilloscope, logic analyzer, spectrum analyzer). * Experience with National Instruments hardware * Working knowledge of electrical systems, troubleshooting, and test design. * Familiarity with automated test systems and programming (TestStand, LabVIEW, Python, C/C++). * Understanding of statistical analysis tools (SPC, GRR). * Knowledge of electromechanical device control (motors, solenoids, heaters). * Understanding of sensor technologies and machine communication protocols. * Experience with LEAN or Six Sigma methodology is a plus What STERIS Offers At STERIS, we invest in our employees and their families for the long term! STERIS wouldn't be where it is today without our incredible people. We share our success together with you by rewarding you for your hard work and achievements. Here is just a brief overview of what we offer: * Competitive Pay * Extensive Paid Time Off and (9) added Holidays. * Excellent healthcare, dental, and vision benefits * 401(k) with a company match * Long/Short term disability coverage * Parental Leave * Additional add-on benefits/discounts for programs such as Pet Insurance * Continued training and educations programs * Excellent opportunities for advancement in a stable long-term career * #LI-KS1 #LI-Hybrid Pay range for this opportunity is $69,000.00 - $92,000.00. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.

Join Rimkus and unlock your potential with endless opportunities for growth, learning, and making a difference! Rimkus (*************** is a worldwide leader in engineering and technical consulting. Rimkus experts specialize in building envelopes, engineering, forensic consulting, dispute resolution, construction management services, and solutions built for the environment. NOW IS THE TIME to join this growing and stable company! We offer our full-time employees a competitive salary, bonus opportunities, and a comprehensive benefits package that includes medical, dental, vision, life insurance, disability coverage, employer-matching 401(k) plans, and opportunities for advancement. Overview Our electrical engineer provides forensic consulting services requiring electrical engineering expertise for insurance, legal, industrial, and other clients. Assesses and determines the cause and origin of electrical failures and damages. Provides oral and written reports of findings and, when needed, provides expert testimony. ESSENTIAL JOB FUNCTIONS: * Performs the investigation and analysis within the field of electrical engineering based upon a scope of work and budget prepared by the consultant and agreed upon by the client before performing the work to resolve claims and legal matters. * Field Investigations: Study and determine the cause and origin of electrical system defects and electrical equipment failures. * Preparation of oral and written reports to document the causes of failure, the extent of loss, the associated repair scope, and recommended remediation is essential. Provides opinions and expert testimony in litigation matters. * Manages multiple projects, coordinating with other experts and supporting as needed to produce client reports promptly. * Ensures that Rimkus policies and procedures are followed, including safe work requirements. * Uses electrical engineering equations, applications, and figures to perform analysis. * Follows land use laws and regulations. * Ability to initiate, develop, and maintain mutually beneficial client relationships. * Includes gathering photographic evidence, conducting investigations to document on-site conditions, overseeing field testing, and reviewing historical documentation. Uses cameras, microscopes, electrical testing equipment, and digital imaging techniques to document conditions in the field and in the lab. REQUIRED EXPERIENCE, EDUCATION, and CERTIFICATIONS: * B.S. Electrical Engineering required. * P.E. license is required. * 2-10+ years of experience. * Field experience is highly preferred. * Depending on location, other licenses or certifications may be required. * Valid driver's license and reliable form of transportation. REQUIRED SKILLS AND ABILITIES: * Must have a high level of analytical skills. Work requires continual attention to detail with the ability to define problems, collect data, establish facts, and draw valid conclusions. * Must be able to interact and communicate with clients at all levels (e.g., internal and external). * Must know a variety of computer software applications, including but not limited to Microsoft Office applications and computer-assisted engineering and design software. * Ability to read, analyze, and interpret standard scientific and technical reports or journals, financial reports, and legal documents. * Ability to write scopes of work, budget estimates, schedules, reports of findings, proposals, general correspondence, and other technical documents. * Ability to respond to inquiries from internal and external clients. * Capable of effectively presenting information to top management, clients, public groups, and/or boards of directors. * Climb ladders, walk on roofs, and enter and work in confined spaces. Shovel fire debris, move furniture, and other household/commercial items. Operate lifts. PHYSICAL DEMANDS, OVERTIME, and TRAVEL * Physical Demands-Work will be performed in both office settings and at various outside locations (e.g., clients' offices, industrial, construction, and/or residential sites). The employee is frequently required to stand, walk on sloped roofs, sit, climb ladders, bend, climb inside attics, crawl under homes and tunnels, balance, stoop, kneel, crouch, talk, hear, and drive a motor vehicle to job sites. Employees may lift and/or move up to 50 pounds. The employee must be sharp, focused, and alert when conducting site inspections, speaking and interacting with clients, preparing written reports of findings, and testifying in deposition or trial. Clear vision and depth perception are also necessary. * Overtime-This position is classified as salaried with an exempt FLSA status. Regular working hours are 8:00 a.m. to 5:00 p.m., Monday through Friday, with a one-hour lunch break. There will be periods when overtime will be required, which the employee must comply with to meet the demands of the position. * Travel Requirements-This position requires up to 25% travel. Some out-of-area and overnight travel may be required. At Rimkus, we value a diverse and inclusive workplace where all employees feel valued and respected. We are committed to creating a work environment that supports and celebrates the unique perspectives and experiences of all employees. If you share our commitment to diversity and inclusivity and are excited about joining a welcoming and supportive team, we encourage you to apply for our open positions. Rimkus is an Equal Employment Opportunity (EEO) Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, disability, or protected veteran status. THIS JOB DESCRIPTION IS SUBJECT TO CHANGE AND DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT OR A GUARANTEE OF CONTINUED EMPLOYMENT. #LI-JD1 #LI-HYBRID

Osborn Engineering is seeking am Electrical Project Engineer for our Cleveland office. The successful candidate will have 10-15 years' experience in the planning, design, development, and construction phases of a variety of project types. This position reports directly to the Manager of Electrical Engineering and will work closely with the directors, managers, and engineering staff to ensure that our client's needs and expectations are exceeded. Osborn is a fully integrated multi-disciplined design firm that uses a specialized team approach to engineering projects. These teams are comprised of a staff of more than 350 professionals that provide designs for all phases of a wide range of projects. Osborn has specialists in civil, structural, mechanical, electrical, plumbing, fire protection and life safety, technology engineering, transportation and commissioning. As an employee-owned firm, each Osborn employee is committed to education and advancement - ensuring that each project is completed with a sense of pride. Osborn's strength lies with its people. Position Responsibilities: Complete project scope of work per discipline, project and client management, under direction of Project Manager. Perform analysis, design and documentation of power distribution, lighting systems, and backup power systems. Coordinate with specialists for fire alarm, technology and lighting design as required by project scope of work. Coordinate with architects, mechanical/plumbing engineers and other disciplines for equipment power needs and sizing electrical distribution. Perform electrical design calculations for electrical loads and panel schedules. Develop electrical systems one-line diagrams. Select and schedule electrical equipment. Edit specifications to reflect the project requirements. Meet with vendors to determine specification requirements for application. Coordinate with other disciplines for all Electrical design elements. Prepare design deliverables for SD, DD, CD level documents. Provide cost opinions for budgeting construction, and reviewing contractor change orders Perform project construction administration including response to RFI's and accurate review of submittals. Perform field verification and take-offs of existing systems for renovation projects. Attend meetings with clients, authorities having jurisdiction, and other professionals as projects require. Work planning and manage the design process to the available hours in the work plan. Job Requirements/Qualifications: (10 - 15) Years of experience in Electrical Design in Consulting Engineering. Working knowledge of design and analysis software such as Revit, SKM, ETAP, Easypower. Knowledge of National Electrical Code (NEC), State Energy Code, NFPA, and FGI Guidelines. Experience with electrical system studies such as short circuit, over-current device coordination, and Arc Flash Hazard analysis per NPFA 70E. Knowledge of standard construction practices and the ability to work with contractors to address construction issues. Coordinate with technical leads and senior engineers when specialized assistance is needed on design. Ability to work and manage tasks on several projects concurrently Experience in designing Healthcare, Sports, Commercial, Public Sector, Industrial, Education, and/or Institutional projects. Bachelor's degree in Electrical Engineering Preferred. PE License Required Qualifications Osborn is looking for a candidate who has the following characteristics: Reliable Team Player Self - Starter Positive Attitude Strong Work Ethic Critical Thinker Detail Oriented Innovative Good Communicator Posted salary ranges reflect market-based averages for the role. Final compensation will be determined based on each candidate's experience, qualifications, and overall fit for the position. All job offers will be contingent on passing a background check. Drug testing may be required for certain clients. Osborn will only be contacting qualified applicants. EEO NOTE TO RECRUITERS: Osborn Engineering does not currently accept unsolicited resumes through or from search firms or recruiters. If you wish to be considered in the future for our list of approved recruiters, please send an e-mail to **************************. All resumes sent directly to management will not be considered.

Job DescriptionThe Electrical Designer is responsible for providing design and drafting services that meet client requirements and industry standards while adhering to applicable Codes and Standards. This role supports substation, utility, and industrial projects and involves creating detailed electrical designs and drawings using AutoCAD Electrical and other CAD tools. Occasional site visits may be required, which include physical activities such as walking, standing, climbing ladders, and lifting.Key Responsibilities Develop detailed designs and drawings, including: Power & Electrical Distribution; Electrical One-Line Diagrams and Single Line Diagrams; Schematics and Wiring Diagrams; Interconnection Diagrams; Substation Layouts (General Arrangements, Sections, Elevations); Plans for Lighting, Grounding, Power, Heat Tracing, etc.; Cable and Conduit Schedules; and, Electrical Details. Perform field investigations and measurements as needed. Ensure compliance with client standards, industry practices, and Codes. Collaborate with project teams to deliver accurate and timely designs. Qualifications Associate or Bachelor's Degree in a technical discipline or equivalent experience. Minimum two (2) years design/drafting experience & skilled in standard drafting techniques. 3-5 years of experience in AutoCAD Electrical, preferred. Proficient in 2-D CAD; experience with 3-D CAD, Plant Design, Revit, and other Autodesk products is a plus. Familiarity with utility and client-specific standards. Working knowledge of Microsoft Office products. Ability to work independently with strong attention to detail and self-checking of work. Ability to travel to client sites as needed. Competitive BenefitsLearn more about our competitive benefits in detail. Why Nexus?Nexus Engineering Group, a distinguished independent full-service engineering, procurement, and construction management (EPCM) firm, provides comprehensive support to clients from concept through startup. With over a decade of demonstrated engineering and design success, Nexus stands out as the firm of choice for those valuing integrity and expertise. At Nexus, you will be part of a talented and passionate team dedicated to excellence and innovation. We foster a collaborative and engaging work environment, making it a place where you'll enjoy contributing to impactful projects. Joining Nexus means aligning with a firm renowned for its creativity, dedication, and relentless focus on achieving client goals. Nexus Engineering Group, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. Third-Party Recruiting PolicyLearn more about our third-party recruiting policy. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

McGraw Kokosing is a leading industrial maintenance contractor based in Middletown, OH. With extensive capabilities that include off-site manufacturing and assembly, pipe fabrication and installation, electrical and instrumentation, structural steel erection, rigging, and equipment setting, we are committed to delivering best-in-class solutions to our clients. Serving a diverse range of industries including steel, power, oil and gas, and food and beverage, McGraw Kokosing provides comprehensive services such as planned plant outages, emergency maintenance, and capital improvement projects for both new and existing facilities. Since partnering with Kokosing Industrial in 1992, we have consistently prioritized safety and quality, striving to lead the industry in delivering exceptional results for our customers. Additionally, our preconstruction services include risk assessments, budget validation, 3D modeling, and more, ensuring that we meet and exceed our clients' expectations every step of the way. : McGraw Kokosing is a leading MEP and industrial maintenance contractor based in Middletown, OH. With extensive capabilities that include off-site manufacturing and assembly, pipe fabrication and installation, electrical and instrumentation, structural steel erection, rigging, and equipment setting, we are committed to delivering best-in-class solutions to our clients. Serving a diverse range of industries including steel, power, oil and gas, data center, and food and beverage, McGraw Kokosing provides comprehensive services such as planned plant outages, emergency maintenance, and capital improvement projects for both new and existing facilities. Since partnering with Kokosing Industrial in 1992, we have consistently prioritized safety and quality, striving to lead the industry in delivering exceptional results for our customers. Additionally, our preconstruction services include risk assessments, budget validation, 3D modeling, and more, ensuring that we meet and exceed our clients' expectations every step of the way. Job Description: The electrical project engineer role will be supporting a team to implementation of electrical systems for large scale industrial construction projects. They will be involved in mission critical projects, taking the project from pre-construction through final acceptance to successful completion. Directly responsible for the project safety and quality, project budget, schedule and job controls, vendor management, submittals and procedures. Duties and Responsibilities: * Manage project engineering and related personnel functions and activities. Includes planning procurement, design review, project controls, work assignments, etc. * Ensure project engineering activities comply with company and contract requirements and support overall construction schedule * Prepare documents to obtain quotes from vendors to provide material, equipment, and other specialty items. * Track material deliveries. * Interface with departments, divisions, and internal staff on issues related to budgeting, staffing, discipline of employees, training/development, scheduling and other activities involving discretion and judgment. * Review engineering plans and vendor submittals. * Monitor crew assignments to ensure productivity goals are met. * Conduct field walks and spot checks of work being performed. * Ensure compliance with county, state and OSHA policies and regulations. Required Skills: * 2+ years similar construction Project Engineer. * Degree in Electrical Engineering or Construction Management Skills and Abilities: * Must be able to understand, interpret, and consistently apply safety laws, company policies/standards. * Ability to apply innovative and effective management techniques to maximize employee performance. * Ability to build trust and achieve results with clients and company team members. * Read drawings, interpret work specifications and work scopes. * Demonstrate the ability to have solid attention to detail, and the ability to be a problem solver. * Strong work ethic to complete tasks as a team in a high-quality manner. Benefits: McGraw Kokosing offers competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. McGraw Kokosing is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class. McGraw Kokosing offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. McGraw Kokosing is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

Akkodis is seeking an Electrical Engineer for a Direct Hire with a client in Cleveland, OH. This role requires an electrical engineer who can deliver innovative repair solutions while supporting motor and generator design needs. Salary Range: $80K/Yearly to $120K/Yearly; The salary may be negotiable based on experience, education, geographic location, and other factors. Electrical Engineer job responsibilities include: * Provide electrical engineering support for coil manufacturing and traction motor repair, ensuring all work meets customer specifications and industry standards. * Reverse‑engineer motor and generator coil designs, perform RCFA, and develop engineered technical solutions. * Lead or support quality improvement actions, using CIPS tools to strengthen productivity, safety, and process compliance. * Develop and implement training materials, technician work instructions, and electrical repair best practices. * Support complex electrical issues across the North Region and assist sales teams with technical guidance and customer communication. Required Qualifications: * B.S. or M.S. in Electrical Engineering (other degrees may be considered with equivalent technical experience). * Preferably 5+ years in electrical motor design, maintenance, repair, diagnostics, and troubleshooting. * Proven experience performing RCFA/FMEA and developing engineered solutions for motor and generator failures. * Strong ability to provide technical support to operations and sales teams, including customer communication, reporting, and training. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at ********************************. Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to: * Paid Time Off (PTO) * 401k Employer Match * Bonus Incentives * Tuition Reimbursement Program * Medical, Dental and Vision plans * Employee Assistance Program (EAP) Pay Details: $80.00 to $120.00 per year Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ****************************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: * The California Fair Chance Act * Los Angeles City Fair Chance Ordinance * Los Angeles County Fair Chance Ordinance for Employers * San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

The Hardware Design Engineer plays a key role in the development and execution of electrical hardware designs for a wide range of industrial and technical applications. This position is responsible for designing, developing, and documenting complex electrical systems and components, ensuring high standards of quality, accuracy, and compliance throughout the design process. Working closely with project engineers, team managers, and purchasing personnel, the Hardware Design Engineer will contribute to project planning, component selection, and the creation of detailed engineering documentation. The ideal candidate brings extensive experience in electrical schematic design, control panel layout, and drawing production using AutoCAD, along with a strong understanding of manufacturing processes and electrical standards. Responsibilities (including but not limited to): Work directly with project engineers, team managers, and purchasing personnel Research and specify electrical hardware and components to be used, when required Prepare detailed schematics and working engineering drawings of electrical devices and systems Responsible for quality of drawings, revisions, parts lists, and other related documentation Generate bills of materials from specifications and drawings Establish and maintain custom AutoCAD menus and block libraries for control panel components to ensure consistency and optimize efficiency Necessary Skills: Understanding of electrical design concepts and processes, components, circuits, and power distribution Ability to generate electrical drive control drawings from written descriptions Ability to independently perform drafting tasks per verbal and written direction Ability to read and interpret specifications Ability to interact with company personnel, customers, and vendors while representing company in a professional manner Possess excellent time-management skills; ability to meet production schedules while managing multiple priorities 5 plus years design and CAD experience 3 plus years' experience with E-Plan Experience with UL certifications and UL compliance (Primarily UL508A) Working knowledge of AutoCAD Electrical 2014 or newer software, a must Able to use AutoCAD Electrical programming and scripting is a plus Capable of using Source Destination Codes and Smart Layout functions Able to create electrical blocks with attributes with an understanding of layers MS Access Database work, create Libs and Model Space with layouts in Paper Space Strong background in analyzing engineering documents and layout of systems in regard to components and parts Working knowledge of NEC< NFPA-79 and UL-508 Required: 5 plus years of Electrical Hardware design for industrial and manufacturing facilities Proficiency with E-Plan (3 plus years) AutoCAD Proficiency

We are seeking an experienced Electrical Design Engineer to support heavy industrial projects. This role focuses on the design and drafting of electrical power and control systems up to 480V, three-phase. The ideal candidate is a hands-on electrical engineer with strong design expertise-not a software or programming-focused engineer. Key Responsibilities *Design electrical power and control systems for heavy industrial applications, including low, medium, and high voltage systems up to 480V, three-phase. *Prepare detailed electrical drawings and documentation using the latest version of AutoCAD. *Utilize CADD and SolidWorks for electrical design and drafting. *Perform on-site investigations and field verification as required (occasional out-of-town travel). *Ensure all designs comply with applicable National and Local electrical codes. *Coordinate with project teams to support engineering, construction, and installation activities. Required Qualifications *5-10 years of experience in electrical design and drafting for heavy industrial projects. *Strong knowledge of electrical power distribution systems (low, medium, and high voltage up to 480V). *Solid understanding of electrical controls. *Proficient in AutoCAD *Working knowledge of National and Local electrical codes. *Ability to conduct field investigations and site visits as needed. Preferred Attributes *Practical, design-focused electrical engineering background. *Experience working directly with industrial facilities and equipment. *Strong attention to detail and ability to produce accurate, code-compliant designs.

For nearly five decades, ZIN Technologies (ZIN) has provided integrated products and spaceflight hardware development services to NASA and Fortune 500 companies. ZIN specializes in the seamless and transparent progression between concept, detailed design, engineering, manufacturing, and operations. ZIN, with its uniquely qualified staff, and a proven track record of award winning work, delivers product development, system prototypes, and space flight hardware on time and under budget. ZIN has over 150 scientists, engineers, and technicians engaged in the development of specialized data acquisition and control systems, power converters, and optical-mechanical sy stems for aerospace and commercial applications. ZIN experience base includes competitively awarded engineering contracts from both government and commercial companies. Our scope of experience includes scientific, technical, operational, and program management, as well as the disciplines associated with large, complex space programs. ZIN Associates are talented, experienced individuals; many have advanced degrees and professional certifications that provide a wealth of knowledge and capabilities to our customers. Operating as a team, we are dedicated to supplying innovative, cost effective services and solutions. Job Description TO BE CONSIDERED, APPLY AT ************************ This position performs schematic capture, layout and implementation of design rules on PCBs of varying complexity. Prepares sketches, block diagrams, wiring diagrams, PCB layout etc. Prepare assembly drawings and BOMs. Works closely with Electrical engineers to apply all inputs and information as required developing final design drawings as appropriate. Must work well with interdisciplinary team. Must work within AS9100 framework and be familiar with Aerospace industry standards. Qualifications U.S. CITIZENSHIP REQUIRED POSSIBLE RELOCATION ASSISTANCE -Ability to collaborate with engineers and program/ project managers to create design drawings, reports and inputs to project schedules. - 3+ years experience with Mentor Graphics or Altium software - Knowledge of IPC-A-600, IPC-A-610, IPC-2221, IPC-222, IPC-6012 and J-STD-001 standards. -Knowledge and use of MS Office products - Experience and knowledge utilizing AutoCAD 2012 is desired Additional Information In addition to competitive salaries, ZIN offers excellent benefits to our associates, including medical, vision, and dental insurance; short- and long-term disability; life insurance; paid leave and paid holidays; 401(k) retirement plan (immediate vesting); education and training reimbursement; professional development opportunities; employee assistance program; flexible spending plans; credit union membership; and direct deposit. ZIN-Technologies, Inc. is an Equal Employment Opportunity Employer M/F/D/V

**Requisition ID:** 65896 Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including _Whirlpool_ , _KitchenAid_ , _JennAir, Maytag_ , _Amana,_ _Brastemp_ , _Consul_ , and _InSinkErator_ . In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com . **This role in summary** Whirlpool is currently seeking a qualified candidates for an **Electrical Engineer** opening to join our Process Transformation team (PT) located in Clyde, OH. This position will work closely with North American manufacturing facilities and PT Fabrication Engineers to define capital purchases from specification of the new equipment through handoff to the manufacturing facility. This position will identify flexible design and process parameters in order to meet customer needs. **Your responsibilities will include** The Process Transformation team for the Laundry Category covers all of the laundry manufacturing facility in Clyde Ohio This group of engineers installs equipment and supports launches in our manufacturing facility. The successful candidate will work closely with North American Region (NAR) Laundry manufacturing locations, Engineering & Technology (E&T), Global Advanced Manufacturing Engineering and our new product organization team to define and assist in the acquisition of the necessary capital equipment to successfully manufacture and deliver winning new products to the marketplace. This will cover coveted brands such as Whirlpool, Amana, Estate, KitchenAid, and Maytag. + Oversight of electrical controls and design layout of new automated equipment. + Oversight of Safety processes and regulation of new equipment and installations. + Oversight of End of Line testing equipment PLC based + Assist in maintaining and updating Safety, Programing, Robotic, and Electrical Standards + Assist in new capital acquisition RFP/RFQ and vendor selection process **Minimum requirements** + Bachelor's Degree in Engineering + 5+ years of Automation and Controls experience in a manufacturing environment **Preferred skills and experiences** + Hands-on experience working in a heavily automated production environment is desired. + Strong interpersonal and team building skills with the ability to work in a team environment. + In-depth knowledge of laundry appliance fabrication manufacturing process.. + Must have a demonstrated history of gathering input from key stakeholders and gaining their buy-in. + Experience with Allen Bradley PLC's along with relay logic and Fanuc and ABB robot interfaces is desired. + Experience with Electrical Control design and drawings and use of AutoCAD + Experience in Risk Assessment for equipment process and Safety circuit design and validation (Functional Safety for Equipment). + Experience with instrumentation and other product testing equipment. + Understanding of NFPA, ANSI, OSHA codes and regulations + Familiar with pneumatic and hydraulic circuits + Ability to travel and meet with equipment suppliers at other Whirlpool facilities + Strong communication, presentation skills, and team skills with any level of the organization + Self-starter with excellent project management and time management skills RSRWH **What we offer** Generous benefits package (************************************************************** , Whirlpool employee discount, fitness & educational reimbursement programs, kitchenettes, and more! Saint Joseph/Benton Harbor locations: Beautiful, recently renovated office space, free coffee, biking/walking trails, and access to The Eddy - Early Childhood Center (depending upon availability - additional costs required). **Additional information** Whirlpool's Ways of Working Our goal is to provide an environment that helps you bring your best to Whirlpool every day. We offer flexibility and industry-leading time-off benefits that will help you balance what's important at work and at home, including: + **Always On Flexibility** - You will have the autonomy to manage personal, family, and outside-of-work commitments as needed. + **Two-Week Work from Anywhere** - Minimum of one-week increments for a total of two weeks per year. + **Sabbatical** - Four weeks paid leave after every five years of service. Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers (********************************* . Additional information about the company can be found on Facebook (*************************************** , Twitter (********************************* , LinkedIn (************************************************************ , Instagram (**************************************** and YouTube (************************************************* . Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

The Electrical Engineer - Power Systems performs electrical power systems studies and analysis for industrial and utility clients. Utilizing industry standard analysis software (ETAP, SKM, etc.), the successful candidate will demonstrate the ability to create study cases, analyze results, and provide detailed written reports. A strong fundamental understanding of industrial and utility power systems and calculation methods is required. The Electrical Engineer - Power Systems is responsible for working with clients and other Nexus personnel to prepare studies including: The Electrical Engineer - Power Systems reports to the Senior Electrical Engineer or Engineering Discipline Manager. Completed technical work is provided to senior management prior to presentation to the client. This position will require occasional travel (2-3 times per year) of up to one week to visit client facilities to gather data along with other Nexus personnel. Responsibilities System Short Circuit Studies Relay Coordination Studies Load Flow Analysis Power System Harmonics Analysis Motor Starting Studies Arc Flash Hazard Studies Relay Setting File Creation & Analysis Qualifications BS in Electrical Engineering is required. Working knowledge of ETAP is required. Familiarity with other systems analysis tools such as SKM is desired. 5+ Years of experience in power systems studies Strong working knowledge of Excel and other Microsoft Office Products Education/Certification Requirements Bachelor of Science in Electrical Engineering required Position Type/Expected Hours of WorkThis is a full-time position. Days and hours of work are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Competitive BenefitsLearn more about our competitive benefits in detail. Why Nexus?Nexus Engineering Group, a distinguished independent full-service engineering, procurement, and construction management (EPCM) firm, provides comprehensive support to clients from concept through startup. With over a decade of demonstrated engineering and design success, Nexus stands out as the firm of choice for those valuing integrity and expertise. At Nexus, you will be part of a talented and passionate team dedicated to excellence and innovation. We foster a collaborative and engaging work environment, making it a place where you'll enjoy contributing to impactful projects. Joining Nexus means aligning with a firm renowned for its creativity, dedication, and relentless focus on achieving client goals. Nexus Engineering Group, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. Third-Party Recruiting PolicyLearn more about our third-party recruiting policy.

We are looking for a talented Hardware Engineer with expertise in PCB schematic design and board layout using Altium. The ideal candidate will have experience troubleshooting and repairing PCBs and experience in hardware engineering. Responsibilities * Design PCB schematics and perform board layouts using Altium. * Troubleshoot and repair PCBs to ensure optimal functionality. * Collaborate with a close-knit team of engineers to develop innovative projects using the latest technology. * Contribute ideas and solutions that are valued and heard by the company leadership. Essential Skills * Bachelor's Degree in Electrical Engineering or a related field. * At least 0-3 years of hardware engineering co-op or internship experience. * Proficiency in PCB design/layout using Altium or a similar design package. Additional Skills & Qualifications * Strong problem-solving skills and attention to detail. * Ability to work collaboratively in a team environment. * Excellent communication skills. Work Environment You will be working in a small team of about 10 engineers in a collaborative and supportive company environment. The company values everyone's ideas and encourages innovative thinking. The projects involve the latest technology and Industry 4.0 advancements, making for an exciting and dynamic work atmosphere. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Avon,OH. Application Deadline This position is anticipated to close on Apr 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

McGraw Kokosing is a leading industrial maintenance contractor based in Middletown, OH. With extensive capabilities that include off-site manufacturing and assembly, pipe fabrication and installation, electrical and instrumentation, structural steel erection, rigging, and equipment setting, we are committed to delivering best-in-class solutions to our clients. Serving a diverse range of industries including steel, power, oil and gas, and food and beverage, McGraw Kokosing provides comprehensive services such as planned plant outages, emergency maintenance, and capital improvement projects for both new and existing facilities. Since partnering with Kokosing Industrial in 1992, we have consistently prioritized safety and quality, striving to lead the industry in delivering exceptional results for our customers. Additionally, our preconstruction services include risk assessments, budget validation, 3D modeling, and more, ensuring that we meet and exceed our clients' expectations every step of the way. : McGraw Kokosing is a leading MEP and industrial maintenance contractor based in Middletown, OH. With extensive capabilities that include off-site manufacturing and assembly, pipe fabrication and installation, electrical and instrumentation, structural steel erection, rigging, and equipment setting, we are committed to delivering best-in-class solutions to our clients. Serving a diverse range of industries including steel, power, oil and gas, data center, and food and beverage, McGraw Kokosing provides comprehensive services such as planned plant outages, emergency maintenance, and capital improvement projects for both new and existing facilities. Since partnering with Kokosing Industrial in 1992, we have consistently prioritized safety and quality, striving to lead the industry in delivering exceptional results for our customers. Additionally, our preconstruction services include risk assessments, budget validation, 3D modeling, and more, ensuring that we meet and exceed our clients' expectations every step of the way. Job Description: The electrical project engineer role will be supporting a team to implementation of electrical systems for large scale industrial construction projects. They will be involved in mission critical projects, taking the project from pre-construction through final acceptance to successful completion. Directly responsible for the project safety and quality, project budget, schedule and job controls, vendor management, submittals and procedures. Duties and Responsibilities: * Manage project engineering and related personnel functions and activities. Includes planning procurement, design review, project controls, work assignments, etc. * Ensure project engineering activities comply with company and contract requirements and support overall construction schedule * Prepare documents to obtain quotes from vendors to provide material, equipment, and other specialty items. * Track material deliveries. * Interface with departments, divisions, and internal staff on issues related to budgeting, staffing, discipline of employees, training/development, scheduling and other activities involving discretion and judgment. * Review engineering plans and vendor submittals. * Monitor crew assignments to ensure productivity goals are met. * Conduct field walks and spot checks of work being performed. * Ensure compliance with county, state and OSHA policies and regulations. Required Skills: * 2+ years similar construction Project Engineer. * Degree in Electrical Engineering or Construction Management Skills and Abilities: * Must be able to understand, interpret, and consistently apply safety laws, company policies/standards. * Ability to apply innovative and effective management techniques to maximize employee performance. * Ability to build trust and achieve results with clients and company team members. * Read drawings, interpret work specifications and work scopes. * Demonstrate the ability to have solid attention to detail, and the ability to be a problem solver. * Strong work ethic to complete tasks as a team in a high-quality manner. Benefits: McGraw Kokosing offers competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. McGraw Kokosing is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class. McGraw Kokosing offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. McGraw Kokosing is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.