Electrical engineer internship jobs in Pflugerville, TX - 387 jobs

**Role Number:** 200*********** We are seeking talented Analog Mixed-Signal designers to join our high-speed SerDes team! Our team specializes in building next generation high-performance wireline transceivers delivering intellectual-property (IP) for Apple's world-leading system-on-chip (SOC). In this role, you will actively work with cross-functional Analog Mixed-Signal design teams to create and execute on state-of-the-art IPs key to Apple's products. You will be challenged to make the best-in-class designs to surprise and delight Apple customers. With redefining the user experience in focus, you will get an opportunity to work on designs which makes the best systems. This enables you to learn end-to-end system while exceeding the highest expectations of quality, innovation and efficiency. If you have strong fundamentals and a track record of tackling technical challenges, you are passionate about learning new skills and improving the value of your work, and you like to be tuned to the bigger-picture while diving deeply into the details to innovate and tackle problems- we invite you to join and grow with our team! **Description** You will work on the development of high-performance and high-speed AMS circuits used in SerDes PHY, including evaluation of different circuit topologies for specific product requirements (e.g., Rx, CDR, Tx, bias generator, high-speed clock generation and low-jitter distribution, high-speed analog signal chain, mixed-signal calibration and algorithms) with best in class power, performance, and area (PPA). You will work with cross-functional teams (e.g., architecture, SIPI, packaging, board design, DFT, ESD) to create block-level specifications and execute on transistor-level implementation and behavioral modeling. You will drive mask design to implement layout view of designs. You will closely work with SOC teams to deliver IP views and make sure they meet the quality standards. While developing these complex IPs, on regular basis you will interact with your peers/management to communicate progress and discuss new ideas making it a lively and interactive work environment. **Minimum Qualifications** + Minimum requirement of a bachelors degree. **Preferred Qualifications** + Deep understanding of analog mixed-signal design with experience in high-speed serial links. + Understanding and experience of designing analog mixed signal circuit blocks including Bandgap, biasing circuits, LDO regulators, amplifiers, comparators, switched-cap circuits, ADCs, DACs, Oscillators, Filters + Understanding of analog mixed-signal concepts like mismatch mitigation, linearity, stability, low-power and low-noise techniques + Good grasp and understanding of digitally assisted analog design concepts (e.g. background calibrations, LMS based adaptive loops) + Experience with high-speed digital circuits (e.g., serializer, deserializer, counters, dividers, etc.) with solid understanding of digital design concepts + Knowledge of Tx/Rx equalization techniques and circuits (e.g. CTLE, DFE, de-emphasis) for 64+ Gbps NRZ and PAM applications + Knowledge of CDR architectures and implementations + Knowledge of lab equipment and testing + Experience in Analog Mixed Signal circuit modeling and performance evaluation (e.g. SystemVerilog, Matlab, Python, VerilogAMS) + Hands-on experience in advanced CMOS technologies, design with FinFet technology + Hands-on experience with AMS IC development from definition to high-volume production including layout supervision, bench evaluation, correlation, and characterization + Concepts of timing closure and related industry tools (e.g., Nanotime, Primetime) + Experience in lab testing of high-speed serial I/O, debug and data analysis techniques + Knowledge of common high-speed SerDes protocols (e.g., PCIe, USB, DP, MPHY) + Skills in scripting and automation to enhance efficiency are highly desirable Apple is an equal opportunity employer that is committed to inclusion and diversity. We seek to promote equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. Learn more about your EEO rights as an applicant (*********************************************************************************************** .

Job title: Electrical & Controls Engineer Job Type: Full Time We are seeking a highly skilled Electrical & Controls Engineer to support the design, development, testing, and scaling of advanced hardware systems. This role is integral to building complex mechatronic equipment that incorporates plasma processing, metal vapor deposition, and high-power laser technologies. The ideal candidate brings deep technical expertise across electrical systems and control architectures and thrives in a hands-on, multidisciplinary engineering environment. Key Responsibilities Collaborate with multidisciplinary engineering teams to design, test, and deliver electrical and control hardware, control system software, data acquisition, and instrumentation for complex mechatronic systems Design and implement system safety features, including interlocks, fault detection, and protection mechanisms Develop and maintain PLC-based control programs for automated test stands and system-level data acquisition Define facility-level electrical requirements, including load calculations, power conditioning, and power quality analysis Specify, integrate, and oversee installation of critical power components, such as transformers, switchgear, and power distribution systems Ensure engineering rigor through design reviews, FMEAs, risk assessments, and mitigation plans Partner with lab engineers and scientists to define controls architecture and process automation requirements Architect electrical enclosures and control panels for safe and reliable distribution of power to motors, instrumentation, and controllers Support system debugging, validation, and continuous improvement during development and scale-up Required Qualifications Hands-on experience in electrical system design, automation, and control systems within a highly technical industry (e.g., aerospace, nuclear, automotive, semiconductor processing, or national laboratories) Experience designing, testing, troubleshooting, and debugging electronics hardware and test software Hands-on experience with LabVIEW and NI hardware platforms (CompactDAQ, CompactRIO, PXI) Bachelor's or master's degree in electrical engineering, Computer Engineering, or a closely related field from an accredited institution Strong written and verbal communication skills, with the ability to document designs and collaborate effectively across disciplines Ability and willingness to work on-site in Austin, TX Ability to comply with export control regulations related to controlled technical information

We are creating devices that enable a bi-directional interface with the brain. These devices allow us to restore movement to the paralyzed, restore sight to the blind, and revolutionize how humans interact with their digital world. Team Description: Join the implant team and be part of an elite team of engineers working on high-performance, safety-critical embedded systems for the next-generation brain-computer interfaces. We are looking for experienced, hands-on engineers who are interested in exploring what's possible in highly power and latency-constrained environments. We are looking for an experienced, hands-on electrical engineer for implant electronics board design, integration with our custom chips, design verification, manufacturing, and quality control. You will own advanced projects, not only working on incremental changes, and be an integral member of a small, fast-moving team. You will be working on all phases of board design (part selection, schematic design, layout, and bring-up) as well as work closely with chip designers, firmware engineers, mechanical and manufacturing engineers, and microfabrication experts for system integration. Job Responsibilities: Utilize electrical engineering fundamentals and best system design practices to deliver high-performant, reliable, and manufacturable extremely size-constraint systems Contribute to all phases of system and board design, from system definition to part selection, schematic design, layout, bring up, and design verification Help conduct R&D investigations and experiments to demonstrate feasibility of new technology for the implant and the charger Work cross functionally to ensure successful systems integration Contribute to system improvements that decrease latency and increase battery life, reliability, and safety Design and deploy systems for implant-charger hardware in the loop testing, and manufacturing line quality control Note: The team is hiring electrical engineers at all levels, both junior and senior. What matters most is evidence of exceptional abilities and a drive to succeed. Required Qualifications: Bachelor's degree in Electrical Engineering or equivalent experience Strong EE fundamentals Minimum of 2 years of experience designing PCBs for low power and size constrained applications, including internships Fluency with PCB CAD tools (Altium, Eagle, KiCad, Allegro) Experience with sensors, power management, and signal/power integrity Experience with wireless systems (BLE, WIFI, Zigbee) Experience building and bringing-up MCUs or FPGA Comfortable with common communication protocols (SPI, UART, I2C, etc.) Comfortable with lab equipment (oscilloscope, VNA, etc.) Basic C and Python programming skills Preferred Qualifications: Experience with firmware development for embedded systems (C/C++) Proficiency with ME CAD tools (Solidworks, AutoCAD) Experience with FEM/FDTD simulation tools and antenna designs/testing Experience with analog circuit design Experience in the design and testing of wearable electronic devices (watches, fitness trackers, wireless headphones, etc.) Expected Compensation: The anticipated base salary for this position is expected to be within the following range. Your actual base pay will be determined by your job-related skills, experience, and relevant education or training. We also believe in aligning our employees' success with the company's long-term growth. As such, in addition to base salary, Neuralink offers equity compensation (in the form of Restricted Stock Units (RSU)) for all full-time employees. Base Salary Range: $109,800 - $238,100 USD What We Offer: Full-time employees are eligible for the following benefits listed below. An opportunity to change the world and work with some of the smartest and most talented experts from different fields Growth potential; we rapidly advance team members who have an outsized impact Excellent medical, dental, and vision insurance through a PPO plan Paid holidays Commuter benefits Meals provided Equity (RSUs) *Temporary Employees & Interns excluded 401(k) plan *Interns initially excluded until they work 1,000 hours Parental leave *Temporary Employees & Interns excluded Flexible time off *Temporary Employees & Interns excluded

Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Applications are accepted until further notice. Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Meet the Team Open-minded, driven, diverse and very creative people at Cisco design the hardware that makes the internet work. Bring your knowledge of computers and networking and take it to a new level in any one of the following product categories including: cloud, social, mobile/wireless, video, VoIP, collaboration, web, routing, switching, IPv6, data center, HPC, Telepresence and many more. Your work will impact billions globally. Your Impact Impact the product development from the lowest levels of circuit design to large system design and see your contribution all the way through to high volume manufacturing. Creative Hardware Engineering positions are available in: * ASIC Design and Verification * System/Board Design * Circuit Board Layout * Hardware Automation * Validation and Test * Signal Integrity * Power Design Minimum Qualifications * Currently enrolled in an undergraduate degree program with 2 years of relevant experience or currently enrolled in a graduate degree program with 0 years of relevant experience in Electrical Engineering, Computer Engineering, or a related field. * Proficient understanding of hardware engineering principles and experience with hardware design tools and software (e.g., CAD tools, simulation software, PCB design, etc.). * Familiarity with hardware testing, debugging techniques, and standard lab equipment (e.g., oscilloscopes, logic analyzers, multimeters). * Basic programming or scripting knowledge (e.g., Python, MATLAB, C/C++) for automation, data analysis, or hardware interface tasks. * Understanding of digital and analog circuit design concepts. * Able to commit to a 6-month co-op program. Preferred Qualifications * Excellent communication skills (verbal and written). * Ability to work collaboratively across business groups and fields. * Exposure to hardware security concepts and design for reliability or manufacturability. * Familiarity with high-speed signal integrity, power electronics, or embedded system design. * Knowledge of FPGA/ASIC design flow and basic understanding of VHDL/Verilog is a plus. Why Cisco? At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. Message to applicants applying to work in the U.S. and/or Canada: Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: * 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees * 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco * Non-exempt employees receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees * Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) * 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next * Additional paid time away may be requested to deal with critical or emergency issues for family members * Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: * .75% of incentive target for each 1% of revenue attainment up to 50% of quota; * 1.5% of incentive target for each 1% of attainment between 50% and 75%; * 1% of incentive target for each 1% of attainment between 75% and 100%; and * Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $44,000.00 - $185,000.00 Non-Metro New York state & Washington state: $44,000.00 - $185,000.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements.

Collaborate across multidisciplinary teams to meet sensing and autonomy requirements, while supporting design, testing, and manufacturing phases. Ensure structural integrity and compliance with industry standards. Responsibilities * Work closely with the software and opto-mechanical teams to understand and meet hardware requirements. * Familiarize yourself with sensors and sensor requirements, focusing on structural design. * Investigate and reference applicable standards to inform requirements. * Integrate individual components such as radar systems, lidar systems, and communication systems into autonomous vessels. * Position radar systems to meet the requirements of autonomy and perception. * Conduct shock and vibration tolerance analysis. * Focus on integration development for the entire vehicle, not on sensor development. * Take ownership of the integration process and support manufacturing and production. Essential Skills * 5 years of experience in structural design, mechanical engineering, and design engineering. * Proficiency in CAD modeling and creating CAD drawings. * Experience in the integration of radar, LIDAR, antenna, and satellite communication systems. * Ability to collaborate across multidisciplinary teams, including software, electrical, and autonomy teams. * Understanding of design cycles and documentation standards. Additional Skills & Qualifications * Clearance eligibility required * Familiarity with RF systems and supporting full product lifecycle, including manufacturing. * Ability to work in ambiguous environments and define own requirements. Job Type & Location This is a Contract to Hire position based out of Austin, TX. Pay and Benefits The pay range for this position is $70.00 - $100.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Electrical Engineer for Medium Voltage Drive (MVD) System Test plans and performs tests on MVDs and related components to ensure quality, performance, and safety. Responsibilities include developing test plans, performing tests, analyzing test data, troubleshooting issues, and ensuring compliance with industry standards. This role requires strong knowledge of variable frequency drives, medium voltage system, and testing methodologies. ESSENTIAL DUTIES AND RESPONSIBILITIES Design and Develop Test Plans Create detailed test procedures for electrical systems related to MVD, circuits, and components. Define testing criteria based on industry standards and project requirements. Perform Electrical Testing Conduct functional, performance, and reliability tests on MVD system and components like switchgear, transformer and cables. Use instruments like oscilloscopes, multimeters, and power analyzers. Troubleshoot and Diagnose Issues Identify faults or failures in electrical systems. Recommend corrective actions and improvements. Analyze Test Data Interpret results to ensure compliance with specifications. Prepare detailed reports documenting findings and recommendations. Ensure Compliance Verify adherence to safety regulations (such as NFPA 70E and OSHA, and IEEE standards). Support certification processes for electrical products. Collaborate with Design and Manufacturing Teams Provide feedback and recommendation to engineers for design improvements. Assist in root cause analysis for failures during production. Maintain Test Equipment Calibrate and maintain testing instruments. Ensure proper functioning and accuracy of tools. Continuous Improvement Develop automated test systems where possible. Optimize testing processes for efficiency and accuracy. Other Responsibilities Occasionally perform on-site testing as required. Carry out additional tasks or projects as assigned by supervisor. Required skills and qualifications Education: Bachelor's degree in electrical engineering or a related field is typically required, a Master's degree is preferred. Experience: 5+ years of experience with MVD and VFD systems, including testing, commissioning, and troubleshooting. Technical knowledge: Strong knowledge of medium voltage drives, power distribution, protection systems and equipment is essential. Software proficiency: Proficiency in electrical simulation tools, test software, Microsoft Office Suite, and potentially 2D/3D CAD systems. Other skills: Excellent problem-solving, analytical, and communication skills are crucial. Experience with product certification processes (e.g., UL, CSA, CE) is often a plus.

Thank you for your interest in Corvalent Corporation. Our records indicate that you have already submitted an application for employment. Should your prior experience match our business needs, you will be contacted by a representative of our company.

The Mixed Signal Hardware Engineer will design and build mixed signal circuit cards which are used to interface to the customers device under test. These circuit cards include both digital and analog circuits used to provide switching, loads and signal conditioning in a test system! The Senior Hardware Engineer will be directly responsible for product design and validation along with reviewing designs of other engineers and mentoring new team members! Key Qualifications * Passionate in continuous learning and working with analog, digital, & other computer technologies * Board level digital circuit design expertise * Proficient in signal integrity analysis and measurement techniques * Experience defining routing constraints for high-speed interfaces * Experience in circuit design with CPU/SoC/Micro-controller * Experience with engineering design tools and schematic design * Proficiency with standard hardware lab equipment including scopes, logic analyzers, signal generators and power supplies. * Test automation expertise with scripting/programming language * HDL experience Description * Developing hardware features based on requirements * Technology research, circuit design, schematics capture, layout review and simulation * FPGA and CPLD development * Products bring-up, test and debugging * Signal integrity analysis * Debugging and resolving system level issues Required Qualifications * Bachelor's or Master's degree in Electrical/Electronic Engineering is required * Minimum 5 years of digital hardware design experience (board level design or VHDL/SystemVerilog) * US person (citizen or green card holder) * Authorized to work in the United States without sponsorship now and in the future * Individuals with temporary visas such as E, F-1 (including those with OPT or CPT), H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

Saronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms. We are seeking a versatile Forward Deployed Hardware Engineer to join our technical team. You will have a strong mechanical and electrical background and be responsible for bringing our technology from the lab to the fleet. This is not a traditional engineering role. You will be responsible for deploying our systems into the real world, directly supporting maritime missions. You will integrate cutting-edge mechanical and electrical payloads, debug complex system-level problems, and iterate hardware designs in the field to ensure success. This is a highly hands-on and field-oriented role with time split between the lab, fabrication spaces, and the waterfront. Responsibilities * Serve as a multidisciplinary field engineer responsible for mechanical and electrical integration of novel systems and payloads onto our Autonomous Service Vessels (ASVs) and maritime platforms * Lead rapid prototyping efforts to support field experimentation and platform evolution * Perform system bring-up, integration, and troubleshooting of power, networking, sensors, and compute subsystems * Own dockside and sea trials - prepare vessels, install new hardware packages, and perform system validation in operationally relevant environments * Drive design-for-assembly and design-for-deployment feedback into hardware product development * Work closely with cross-functional teams, including Mechanical, Electrical, Software, and Autonomy Engineers, to evolve and harden system designs * Interface with suppliers and fabrication shops to support fast turnarounds of custom components and harnesses * Contribute to documentation and training to support the scaling of deployment and manufacturing Qualifications * Bachelor's degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field. Master's degree is a plus * 3+ years of experience working on integrated electromechanical systems, preferably in fielded or mission-critical environments * Hands-on expertise in Mechanical assembly and fabrication (CNC, sheet metal, 3D printing, etc.) * Hands-on expertise in Electrical integration (power systems, cabling, connectors, PCB bring-up) * Hands-on expertise in rapid prototyping and system-level debugging * Comfort working with tools such as CAD (SolidWorks, NX, or similar), basic electrical test equipment (multimeters, oscilloscopes), and field integration setups * Experience working with a Linux-based operating system * Understanding of networking protocols and distributed systems, including TCP/IP, UDP, and message-passing frameworks * Willingness to work in dynamic, hands-on environments, including on and near the water * Strong sense of ownership and bias for action * You thrive in real-world environments, responsible for solving open-ended problems * Experience working with autonomous systems, drones, or other robotic platforms is preferred * Familiarity with maritime environments or naval platforms is preferred * Ability to write basic software tools (e.g., Python, shell scripts) for hardware bring-up or test automation is preferred * Exposure to ruggedized or IP-rated hardware design is preferred * Experience in systems integration or test engineering is preferred Benefits * Medical Insurance: Comprehensive health insurance plans covering a range of services * Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care * Saronic pays 100% of the premium for employees and 80% for dependents * Time Off: Generous PTO and Holidays * Parental Leave: Paid maternity and paternity leave to support new parents * Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses * Retirement Plan: 401(k) plan * Stock Options: Equity options to give employees a stake in the company's success * Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage * Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands * Prolonged periods of sitting at a desk and working on a computer * Occasional standing and walking within the office * Manual dexterity to operate a computer keyboard, mouse, and other office equipment * Visual acuity to read screens, documents, and reports * Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies * Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages) This role requires access to export-controlled information or items that require "U.S. Person" status. As defined by U.S. law, individuals who are any one of the following are considered to be a "U.S. Person": (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3).

The reputation of Dell Technologies for delivering award-winning hardware is legendary and our Hardware Engineering team is at the heart of it. We design and develop analogue as well as digital hardware products - not just computer or network hardware devices but peripherals too. Recognized for our high level of technical expertise in a variety of engineering disciplines, we're involved across the development lifecycle - from research to the building, testing and delivery of completed products. Innovators in our field, we lead the way in exploring new concepts, approaches, processes, materials and components. Join us to do the best work of your career and make a profound social impact as a Senior Principal Engineer on our Hardware Engineering Team in Hopkinton, Massachusetts or Austin, Texas. What you'll achieve As a Hardware Engineer, you'll deliver enterprise class hardware, made up of a wide range of cutting-edge technologies, to dozens of product lines and thousands of customers. You'll be exposed to all aspects of hardware and systems engineering working closely with firmware, mechanical, power and thermal engineers. You'll work in a fast-paced environment with a team of highly skilled engineers providing both support and guidance. It is a team fueled by collaboration and a company deeply committed to integrity and responsibility. You will: * Provide technical leadership to a project team developing cutting edge server and storage solutions, including AI servers used for training the leading AI models * Be responsible for delivering a project architecture and concept for servers and storage, which will then be handed over to a development team as well as work with Product Management and Marketing to fine-tune requirements * Work on feasibility studies, defining architecture, SI constraints, electronic computer-aided design (ECAD) and mechanical computer-aided design (MCAD) guidance and documenting key risks * Author and coordinate the creation of concept specifications and design guides * Possess excellent communication skills for requirements discussions as well as provide technology updates to multiple Dell EMC product groups and development teams Essential Requirements: * Strong background in electrical or computer engineering and an understanding of server architecture * Experience in hardware design, analysis and debug of complex printed circuit boards (PCBAs) along with an understanding of the power, mechanical and thermal constraints. * Must have experience designing PCBAs utilizing PCIe Gen 4 or higher technology (or equivalent high speed serial design experience) * Exposure to working with global teams including Original Design Manufacturer (ODM)/Joint Design Manufacturer (JDM) partners * Experience working in cross-functional engineering teams Desirable Requirements: * Typically requires 5 to 12+ years of related experience in a professional role with a Bachelor's degree; or 8+ years with a Master's degree; or 5+ years with a PhD; or equivalent experience * Experience using simulation to design PCBAs Benefits and Perks of working at Dell Technologies Your life. Your health. Supported by your benefits. You can explore the overall benefits experience that awaits you as a Dell Technologies team member - right now at MyWellatDell.com. Who we are We believe that each of us has the power to make an impact. That's why we put our team members at the center of everything we do. If you're looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we're looking for you. Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Join us to build a future that works for everyone because Progress Takes All of Us. Dell Technologies is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. Read the full Equal Employment Opportunity Policy here.

Do you have a passion for crafting entirely new solutions? Be a part of a world-class silicon design team which delivered an incredible high performance M1 chip for our Mac line of products and chips for our flagship products (iPhone, iPad, Mac, Airpods, HomePod and Watch). As part of our Digital Custom Group (DCG), you'll take imaginative and revolutionary ideas and determine how to turn them into reality! You and your team will apply engineering fundamentals and start from scratch if needed, bringing forward-thinking ideas to the real world. Join us, and you'll help design the foundation that allows us to bring customers experiences they've never before envisioned! This is a highly visible role at the heart of a silicon design effort, making a critical impact delivering products to market quickly. Your designs will strongly influence CPU / GPU / SoC / Neural Engine / Camera designs in Apple's Custom Silicon group. Imagine yourself at the center of our hardware development effort. Where you will collaborate with all fields, playing a strategic role of getting functional products to millions of customers quickly. You will have the opportunity to integrate and come up with new insights, work with a team of hardworking engineers, and implement groundbreaking techniques of Machine Learning, Circuit design in Apple's marquee products like M1 and A14 Bionic. As an SRAM Circuit Designer for the Digital Custom Group, you will perform the following: - Design and implement custom digital circuits for SRAM design. - Work with an extraordinary logic/architecture team to formulate design specifications. - Define architecture/topologies optimizing for power, timing, area and yield. - Schematic capture, simulations/analysis, margin verifications. - Functional equivalency and DFT modeling. - Work with layout team to create optimal GDS. - Verify extracted GDS meets design specifications. - Backend verification, IR/EM. - Write RTL, validate use-cases, verify against design schematics. - Support post-silicon effort to enable productization. We are looking for applicants with work experience within a SoC design cycle, developing circuits and SRAM/Register File for low power, low voltage and high performance. Knowledge of Cache design/architecture, memory hierarchy is a huge plus. Working knowledge of RTL modeling. Solid understanding of industry-standard design tools. Deep understanding of nanometer device physics, leakage mechanisms, technology interactions with device behavior. Ability to devise experiments and analyze data for silicon debug. Machine Learning algorithms (ML) and scripting is a big plus Minimum requirement of a BS degree.

Meta is seeking a versatile Hardware Engineer to join our Compute Hardware team. Our mission is backed by a massive hardware infrastructure. Our computational challenges are big, complex, and consistently evolving. Your work has the potential to shape the compute hardware going into our cutting-edge data centers affecting billions of users. **Required Skills:** Hardware Engineer Responsibilities: 1. Work with local and remote teams and suppliers, to define product roadmap and program 2. Specify, design, and develop CPU/GPU/ASIC based compute hardware solutions, and ASIC enabling hardware 3. Lead the bring-up, validation, and launch of hardware systems 4. Support hyper-scale deployment and obtain learning for next generation design 5. Collaborate with open source hardware community to drive innovation for large scale infrastructure **Minimum Qualifications:** Minimum Qualifications: 6. Bachelor's degree in Electrical Engineering, Computer Engineering, relevant technical field, or equivalent practical experience 7. 6+ years of experience with development and bring-up of data center system equipment, or complex consumer devices 8. 6+ years of experience with PCB design with both integrated and discrete circuits, and high-speed interfaces 9. 6+ years of experience leveraging hardware architecture and design for analyzing and resolving system hardware issues **Preferred Qualifications:** Preferred Qualifications: 10. 6+ years of experience with designing ASIC verification & bring up hardware 11. 6+ years of experience with end-to-end enabling, design, and deployment cycle of multiple generations of products 12. Experience with industry standard EDA tools for developing and reviewing PCB designs 13. 6+ years of expertise with the industry leading designs of CPU/GPU hardware and server system architecture 14. Master's degree in Electrical Engineering, Computer Engineering, or relevant technical field 15. Experience interfacing with thermal, mechanical, management firmware, system firmware, and software teams during product development 16. Experience with owning and delivering a complete hardware enclosure as technical lead with other cross-functional teams 17. 6+ years of expertise with designing and troubleshooting data buses used in servers (PCIe, CXL, DDR, SAS, SATA, I2C) in Linux environments, including the use of high-speed scope, logic analyzer, and other validation methods **Public Compensation:** $144,000/year to $204,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Applications are accepted until further notice. Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Meet the Team Open-minded, driven, diverse and very creative people at Cisco design the hardware that makes the internet work. Bring your knowledge of computers and networking and take it to a new level in any one of the following product categories including: cloud, social, mobile/wireless, video, VoIP, large data, collaboration, web, Internet of Things, routing, switching, IPv6, data center, HPC, Telepresence and many more. Your work will impact billions globally. Your Impact Impact the product development from the lowest levels of circuit design to large system design and see your contribution all the way through to large volume manufacturing. Creative Hardware Engineering positions available in: * ASIC Design and Verification * System/Board Design * Circuit Board Layout * Hardware Automation, Validation and Test * Signal Integrity * Power Design Minimum Qualifications * Currently enrolled in a PhD program in Computer Science, Artificial Intelligence, Machine Learning, or a related field in Computer Science, Electrical Engineering, Computer Engineering, Applied Science, Material Engineering, Applied Physics, Math, Physics or related major * Proficient experience in hardware engineering areas such as ASIC Design and Verification, System/Board Design, Circuit Board Layout, Hardware Automation, Validation and Test, Signal Integrity, and Power Design. * Foundational understanding of hardware engineering principles, including experience with hardware design and tools (e.g., Altium, Cadence, Mentor Graphics) and simulation software. * Familiarity with hardware testing and debugging techniques using lab equipment such as oscilloscopes, logic analyzers, and multimeters. Preferred Qualifications * Ability to lead multiple tasks, prioritize effectively, and work toward both short- and long-term goals. * Experience building and maintaining positive working relationships within diverse and extended teams. * Excellent written and verbal communication skills. * Proven ability to work collaboratively across business groups and teams (hardware, software, manufacturing, etc.). * Exposure to scripting or programming languages (e.g., Python, MATLAB, C/C++) for test automation or data analysis. Why Cisco? At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. Message to applicants applying to work in the U.S. and/or Canada: Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: * 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees * 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco * Non-exempt employees receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees * Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) * 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next * Additional paid time away may be requested to deal with critical or emergency issues for family members * Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: * .75% of incentive target for each 1% of revenue attainment up to 50% of quota; * 1.5% of incentive target for each 1% of attainment between 50% and 75%; * 1% of incentive target for each 1% of attainment between 75% and 100%; and * Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $44,000.00 - $185,000.00 Non-Metro New York state & Washington state: $44,000.00 - $185,000.00 * For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements.

Collaborate across multidisciplinary teams to meet sensing and autonomy requirements, while supporting design, testing, and manufacturing phases. Ensure structural integrity and compliance with industry standards. Responsibilities + Work closely with the software and opto-mechanical teams to understand and meet hardware requirements. + Familiarize yourself with sensors and sensor requirements, focusing on structural design. + Investigate and reference applicable standards to inform requirements. + Integrate individual components such as radar systems, lidar systems, and communication systems into autonomous vessels. + Position radar systems to meet the requirements of autonomy and perception. + Conduct shock and vibration tolerance analysis. + Focus on integration development for the entire vehicle, not on sensor development. + Take ownership of the integration process and support manufacturing and production. Essential Skills + 5 years of experience in structural design, mechanical engineering, and design engineering. + Proficiency in CAD modeling and creating CAD drawings. + Experience in the integration of radar, LIDAR, antenna, and satellite communication systems. + Ability to collaborate across multidisciplinary teams, including software, electrical, and autonomy teams. + Understanding of design cycles and documentation standards. Additional Skills & Qualifications + Clearance eligibility required + Familiarity with RF systems and supporting full product lifecycle, including manufacturing. + Ability to work in ambiguous environments and define own requirements. Job Type & Location This is a Contract to Hire position based out of Austin, TX. Pay and Benefits The pay range for this position is $70.00 - $100.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe are seeking a Perception Hardware Engineer to join a team that will integrate and develop the sensing and perception systems that power autonomy on our unmanned surface vessels. In this role, you will integrate and develop perception components such as radar, camera, LiDAR, GPS, and other sensors to build robust situational awareness in maritime environments into a cohesive, high performing system. This is a hands-on, high-impact role for an engineer who thrives on solving real-world problems in complex, noisy domains and wants to shape the future of naval autonomy.Responsibilities: Serves as the technical expert on perceptionhardware and their integration on Saronic's products Collaborates in a multi-disciplinary team of expert engineers that specialize in perception system design, analysis, build and test Works closely with mechanical, optical, electrical, software, and manufacturing engineering teams to define requirements and plans for validation methods for Saronic's perception system Ensures technical requirements are satisfied and product deadlines are met Creates and presents detailed design reviews of perceptionhardware development and integration Develops and implements analysis and testing methods for new products and their subcomponents Grows and maintain vendor relationships for various perception sensors Designs perception calibration fixtures and tooling to aid high rate production Provides manufacturing support for trouble shooting and resolving perception hardware issues Qualifications: Required Bachelor's degree or greater in Mechanical Engineering, Robotics, Electrical Engineering, or a related field. 2+ years designing complex mechanical and electrical systems Strong engineering fundamentals Hands-on design, analysis, and testing of sensors and structures Proficiency with 3D CAD software (Siemens NX/Unigraphics preferred) Experience with engineering trade studies, tolerance stack up analysis, hand calculations, finite element analysis and testing of integrated systems Ability to obtain and maintain a security clearance Preferred Experience with maritime autonomy challenges such as dynamic environments, variable lighting, and low-contrast targets. Proven success developing, integrating, and validating optical & sensor systems on maritime or aerospace platforms Experience with design and testing for shock and vibration environments Prior experience working on DoD programs or unmanned maritime systems. A professional engineering license or similar professional certification Benefits: Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands: Prolonged periods of sitting at a desk and working on a computer. Occasional standing and walking within the office. Manual dexterity to operate a computer keyboard, mouse, and other office equipment. Visual acuity to read screens, documents, and reports. Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies. Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

We are seeking talented Analog Mixed-Signal designers to join our high-speed SerDes team. Our team specializes in building next generation high-performance wireline transceivers delivering intellectual-property (IP) for Apple's world-leading system-on-chip (SOC). In this role, you will actively work with cross-functional Analog Mixed-Signal design teams to create, execute and drivestate-of-the-art IPs key to Apple's products. You will be challenged to make the best-in-class designs to surprise and delight Apple customers. With transforming the user experience in focus, you will get an opportunity to work on designs which makes the best systems. This enables you to learn end-to-end system while exceeding the highest expectations of quality, innovation and efficiency. If you have strong fundamentals and a track record of tackling technical challenges, If you are passionate about learning new skills and improving the value of your work, If you like to be tuned to the big picture while diving deeply into the details to innovate and tackle problems. We invite you to join and grow with our team!You will work on the development of high-performance and high-speed AMS circuits used in SerDes PHY, including evaluation of different circuit topologies for specific product requirements (e.g., Rx, CDR, Tx, bias generator, high-speed clock generation and low-jitter distribution, phase interpolator, DLL, VCO, LDO) with best-in-class power, performance, and area (PPA). You will be leading discussions with cross-functional teams (e.g., architecture, SIPI, packaging, board design, DFT, ESD) to create and drive block-level specifications, mixed-signal implementations and behavioral modeling. You will closely work with SOC teams to deliver IP views and make sure they meet the quality standards. While developing these complex IPs, on regular basis you will interact with your peers/management to communicate progress, discuss new ideas and drive new implementations/concepts making it a rewarding and growth-oriented work environment.Deep understanding of analog mixed-signal design with experience in high-speed serial links. Experience of designing analog mixed signal circuit blocks including Bandgap, biasing circuits, LDO regulators, amplifiers, comparators, switched-cap circuits, ADCs, DACs, Oscillators, Filters Understanding of analog mixed-signal concepts like mismatch mitigation, linearity, stability, low-power and low-noise techniques Understanding and experience with digitally assisted analog design concepts (e.g. background calibrations, LMS based adaptive loops) Proven track record of working with system and architecture teams to drive block-level and IP requirements for high-speed IO in 100+ Gbps NRZ and PAM applications Proven track record of working with large teams and guiding junior engineers to develop circuit components required in TX, RX, PLL etc. of a high-speed IO. Experience with high-speed digital circuits (e.g., serializer, deserializer, counters, dividers, etc.) with solid understanding of digital design concepts Experience and solid understanding of Tx/Rx equalization techniques and circuits (e.g. CTLE, DFE, de-emphasis) for 100+ Gbps NRZ and PAM applications Experience with EQ adaptation methods and circuit implementations to improve PPA Solid understanding of CDR architectures and implementations Experience in Analog Mixed Signal circuit modeling and performance evaluation (e.g. SystemVerilog, Matlab, Python, VerilogAMS) Hands-on experience to drive lab testing, debug and data analysis Hands-on experience in advanced CMOS technologies, design with FinFet technology Hands-on experience with AMS IC development from definition to high-volume production including layout supervision, bench evaluation, correlation, and characterization Concepts of timing closure and related industry tools (e.g., Nanotime, Primetime) Concepts of IP delivery and quality checks Knowledge of common high-speed SerDes protocols (e.g., PCIe, USB, DP, MPHY) is highly desired Skills in scripting and automation to enhance efficiency are highly desirable Array

Meta is seeking a versatile Hardware Engineer to join our Compute Hardware team. Our mission is backed by a massive hardware infrastructure. Our computational challenges are big, complex, and consistently evolving. Your work has the potential to shape the compute hardware going into our cutting-edge data centers affecting billions of users. Minimum Qualifications * Bachelor's degree in Electrical Engineering, Computer Engineering, relevant technical field, or equivalent practical experience * 6+ years of experience with development and bring-up of data center system equipment, or complex consumer devices * 6+ years of experience with PCB design with both integrated and discrete circuits, and high-speed interfaces * 6+ years of experience leveraging hardware architecture and design for analyzing and resolving system hardware issues Preferred Qualifications * 6+ years of experience with designing ASIC verification & bring up hardware * 6+ years of experience with end-to-end enabling, design, and deployment cycle of multiple generations of products * Experience with industry standard EDA tools for developing and reviewing PCB designs * 6+ years of expertise with the industry leading designs of CPU/GPU hardware and server system architecture * Master's degree in Electrical Engineering, Computer Engineering, or relevant technical field * Experience interfacing with thermal, mechanical, management firmware, system firmware, and software teams during product development * Experience with owning and delivering a complete hardware enclosure as technical lead with other cross-functional teams * 6+ years of expertise with designing and troubleshooting data buses used in servers (PCIe, CXL, DDR, SAS, SATA, I2C) in Linux environments, including the use of high-speed scope, logic analyzer, and other validation methods Responsibilities * Work with local and remote teams and suppliers, to define product roadmap and program * Specify, design, and develop CPU/GPU/ASIC based compute hardware solutions, and ASIC enabling hardware * Lead the bring-up, validation, and launch of hardware systems * Support hyper-scale deployment and obtain learning for next generation design * Collaborate with open source hardware community to drive innovation for large scale infrastructure About Meta Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today-beyond the constraints of screens, the limits of distance, and even the rules of physics. Equal Employment Opportunity Meta is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, reproductive health decisions, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, genetic information, political views or activity, or other applicable legally protected characteristics. You may view our Equal Employment Opportunity notice here. Meta is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, fill out the Accommodations request form.

Collaborate across multidisciplinary teams to meet sensing and autonomy requirements, while supporting design, testing, and manufacturing phases. Ensure structural integrity and compliance with industry standards. Responsibilities + Work closely with the software and opto-mechanical teams to understand and meet hardware requirements. + Familiarize yourself with sensors and sensor requirements, focusing on structural design. + Investigate and reference applicable standards to inform requirements. + Integrate individual components such as radar systems, lidar systems, and communication systems into autonomous vessels. + Position radar systems to meet the requirements of autonomy and perception. + Conduct shock and vibration tolerance analysis. + Focus on integration development for the entire vehicle, not on sensor development. + Take ownership of the integration process and support manufacturing and production. Essential Skills + 5 years of experience in structural design, mechanical engineering, and design engineering. + Proficiency in CAD modeling and creating CAD drawings. + Experience in the integration of radar, LIDAR, antenna, and satellite communication systems. + Ability to collaborate across multidisciplinary teams, including software, electrical, and autonomy teams. + Understanding of design cycles and documentation standards. Additional Skills & Qualifications + Clearance eligibility required + Familiarity with RF systems and supporting full product lifecycle, including manufacturing. + Ability to work in ambiguous environments and define own requirements. Job Type & Location This is a Permanent position based out of Austin, TX. Pay and Benefits The pay range for this position is $70.00 - $100.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Austin,TX. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe are seeking a Perception Hardware Engineer to join a team that will integrate and develop the sensing and perception systems that power autonomy on our unmanned surface vessels. In this role, you will integrate and develop perception components such as radar, camera, LiDAR, GPS, and other sensors to build robust situational awareness in maritime environments into a cohesive, high performing system. This is a hands-on, high-impact role for an engineer who thrives on solving real-world problems in complex, noisy domains and wants to shape the future of naval autonomy.Responsibilities: Serves as the technical expert on perceptionhardware and their integration on Saronic's products Collaborates in a multi-disciplinary team of expert engineers that specialize in perception system design, analysis, build and test Works closely with mechanical, optical, electrical, software, and manufacturing engineering teams to define requirements and plans for validation methods for Saronic's perception system Ensures technical requirements are satisfied and product deadlines are met Creates and presents detailed design reviews of perceptionhardware development and integration Develops and implements analysis and testing methods for new products and their subcomponents Grows and maintain vendor relationships for various perception sensors Designs perception calibration fixtures and tooling to aid high rate production Provides manufacturing support for trouble shooting and resolving perception hardware issues Qualifications: Required Bachelor's degree or greater in Mechanical Engineering, Robotics, Electrical Engineering, or a related field. 2+ years designing complex mechanical and electrical systems Strong engineering fundamentals Hands-on design, analysis, and testing of sensors and structures Proficiency with 3D CAD software (Siemens NX/Unigraphics preferred) Experience with engineering trade studies, tolerance stack up analysis, hand calculations, finite element analysis and testing of integrated systems Ability to obtain and maintain a security clearance Preferred Experience with maritime autonomy challenges such as dynamic environments, variable lighting, and low-contrast targets. Proven success developing, integrating, and validating optical & sensor systems on maritime or aerospace platforms Experience with design and testing for shock and vibration environments Prior experience working on DoD programs or unmanned maritime systems. A professional engineering license or similar professional certification Benefits: Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands: Prolonged periods of sitting at a desk and working on a computer. Occasional standing and walking within the office. Manual dexterity to operate a computer keyboard, mouse, and other office equipment. Visual acuity to read screens, documents, and reports. Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies. Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.