Electrical engineer jobs in Mashpee, MA

Collabera Inc (Staffing Firm). We are based out of Morristown, NJ and we have been providing contingent labor to our clients for last 25 years. In 2015 we placed more than 6,000 contractors across select 100+ clients that we service. End client for this project is a large legal organization with operations in more than 100 countries and has more than 50,000 employees around the world. For eight consecutive years, Fortune has named this company as World's ‘Most Admired Companies to work for'. Job Description A Senior Research Engineer for the DVT Prevention business will substantially contribute to the design and development and sustaining engineering activities of Intermittent pneumatic compression devices used to prevent Deep Vein Thrombosis, a leading cause of morbidity in hospitals. These activities will cover all phases of the product life cycle from concept through end of life. The individual in this position will be called upon to work in a dynamic team environment lead projects, contribute to design decisions and execute requirements across a wide variety of projects. The devices are electro-mechanical pneumatic systems that control the inflation of pneumatic compression garments used in the prevention of Deep Vein Thrombosis (DVT). The ability to execute hardware electronic designs with embedded software is a key requirement. Attention to detail and working knowledge of regulations for the medical device industry are essential. The engineer must be able to work in a team environment and be able to communicate clearly across all disciplines including Quality Assurance, Regulatory Affairs, Manufacturing, Marketing, Clinical Affairs and outside design partners and regulatory agencies. Qualifications Education: BS, Electrical Engineering or Biomedical engineering with electrical engineering concentration Minimum Experience: Bachelor's plus a minimum of 5 years relevant medical device experience; or Master's plus a minimum of 3 years relevant medical experience; Skills/Qualifications: • PCB design software such as PCAD, PADS OrCAD or Altium • Familiarity with electrical and medical device safety standards • Requirements development and management for embedded systems • Knowledge of Good Manufacturing Practices (GMP), Quality System Regulations (FDA QSR) and design controls • Requirements Tracing • Design for Six Sigma techniques and methodologies and knowledge of Statistical Analysis, and Design of Experiments. Working knowledge of Minitab or equivalent statistical analysis tools • Strong written, verbal, and presentation skills • MS office tools including Word, Excel, PowerPoint, Project • Thorough understanding of engineering practices, product safety and root cause analysis. Additional Information To get further details or to apply, please contact: sagar.rathore(at)collabera ************

ControlPoint Technologies is seeking a Lead Engineer to provide project support within our Substation Engineering team. Candidates must have direct experience with Transmission and Distribution (T&D) Substation Projects. Ability to work within engineering design standards and quality programs specific to client needs and requirements. Project Management skills and ability to meet critical deadlines is required. Must be an outgoing team player with the ability to provide client confidence. Technical Responsibilities: Substation Electrical Engineering Substation Electrical One-Line, AC and DC Elementary, Wiring and Interconnection, Cable Schedules, Material Lists, SCADA and RTU Relay Protection Settings, Relay Control Settings, Relay Wiring Substation Engineering Substation General Arrangement, Control House Layout, Panel Design, Plans and Sections, Grounding, Lightning Protection, Conduit Layout, Material List, Construction Specifications Prepare calculations for studies and reports (grounding, lightning protection, AC/DC load studies, etc.) Support engineering and design related to Civil/Structural; including structural drawings, foundation drawings, foundation and steel calculations. Project Engineering Responsibilities: Project Engineering Lead Develop scope of work, conceptual designs Provide guidance and mentorship within engineering and design team Perform quality assurance reviews Project Planning, Organization, Estimating, Scheduling, Coordinating and Monitoring of work activities Strong client focus and customer service Excellent communication skills Plan engineering project deliverables with stakeholders. Qualifications: Bachelor's Degree in Electrical Engineering Professional Engineering Licensure (PE) is required, will accept candidates with Fundamentals of Engineering (FE) on path to Professional Engineering licensure. Minimum of ten (10) years' experience electric utility industry Experience in utility substation engineering with focus on electrical or physical aspects of design Proficiency in AutoCAD and/or MicroStation Excellent Verbal and Written Communication Skills Comprehensive benefit package includes: Competitive salary Medical and Dental Insurance 401(k) and Roth 401(k) Retirement Plans with Company Match Company paid short-term and long-term disability insurance Company paid life insurance policy Company paid training, seminars, and events Tuition reimbursement Professional Licensure reimbursement Paid time off for holidays, vacation, and sick Family medical leave Company events and outings

The Electrical Drafter will produce detailed schematics and layouts for electrical systems using OrCAD. This position works closely with engineering teams to ensure designs meet project requirements within a configuration-managed environment. Responsibilities: Create and update electrical schematics and PCB layouts using OrCAD. Maintain documentation and drawings in a configuration-managed environment. Collaborate with engineers to ensure compliance with design standards. Assist in design reviews and incorporate feedback. Skills & Qualifications Required Qualifications: Early to mid-career experience in electrical drafting. Proficiency in OrCAD. Experience working in a configuration-managed environment. Preferred Qualifications: Prior experience as a DoD contractor. Familiarity with Costpoint and Jira. Job Type & Location This is a Contract to Hire position based out of Bourne, MA. Pay and Benefits The pay range for this position is $28.00 - $43.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in Bourne,MA. Application Deadline This position is anticipated to close on Jan 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Saab Inc., Autonomous and Undersea Systems division is seeking an innovative and experienced Senior Staff Electrical Engineer to support our growing team working on Autonomous Underwater Vehicles (AUVs) and Remotely Operated Vehicles (ROVs). This position spans many Electrical Engineering topics and is the perfect position for anyone looking at a wide array of design challenges. Our AUVs, UUVs, and ROVs span AC power (shore and charging equipment), DC power (battery systems and conversion), sensor integration, and electromechanical (propulsion, motors, servos, actuators) integration. This is a hands-on position with the chance to build, test, and integrate the designs you work on. This position will be remote or hybrid to start, but will ultimately be based out of our new Bristol, RI facility that is opening in early 2026. An Electrical Engineering position for anyone interested in leading, designing, developing, and/or modifying AC, DC, linear, analog, digital, acoustic, or sensor designs in subsea applications. This person will lead design approaches and parameters. They will analyze operating data, develop and conduct tests, and draw conclusions or make design decisions based on results. They will be responsible for selecting components and equipment based on requirements, specifications, and reliability. They will also support the interdisciplinary development team with their expertise to guide System level decisions. Responsibilities: Lead electrical engineering support and guidance for AUV/ROV systems and present technical concepts regarding product design and performance. Coordinate with Systems, Software, Mechanical, Quality, and Manufacturing as part of a team designing AUV/ROV systems. Technically execute the research and development of new circuit card designs and electromechanical assemblies. Lead and execute functional analysis, evaluation, and optimization of product designs. Present technical results and content to internal and external customers, tailored to the customer audience. Provide technical support to key subcontractors and suppliers. Create and maintain power and endurance budgets through development phases. Provide technical support for manufacturing related matters. Lead design verification efforts. Lead cost/benefit trade-off analysis and feasibility studies. Lead electrical related failure analysis of hardware. Contribute to system level design considerations and trade-offs where many engineering disciplines are concerned. Compensation Range: $124,200 - $161,500 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Skills and Experience: Required Skills And Experience: Bachelor of Science Degree in Electrical Engineering with 15+ years of experience or Master of Science Degree in Electrical Engineering with 13+ years of experience. Experience using industry standard electrical engineering design tools (Altium, SPICE, MATLAB) Product development experience demonstrating a strong engineering aptitude and good problem-solving skills with underwater vehicles and devices. Demonstrated experience resolving issues during design, development and execution of electrical engineering activities. Strong interpersonal and group communication skills. Proficiency with MS Office software applications. Experience to Earned Value (EV), Cost Account Management (CAM), and Integrated Master Schedule (IMS) development and tracking Must hold or be able to obtain U.S. DoD SECRET security clearance. Ability to travel up to 15%, both international and domestic. Proficient at understanding requirements traceability in a model-based systems engineering environment. Desired Experience and Skills: Prior DoD industry experience Experience with designing and testing electronics in wet and subsea environment Experience with Altium, SPICE, and electrical systems in Matlab Familiarity with Mil Standards, ruggedized equipment design, and environmental test requirements Knowledge of printed circuit board (PCB) design Knowledge of design for EMI/EMC standards in military application Experience reading and creating schematics, wiring diagrams, and component data sheets Experience derating components and designing for reliability Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Benefits: Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: Medical, vision, and dental insurance for employees and dependents Generous paid time off, including 8 designated holidays 401(k) with employer contributions Tuition assistance and student loan assistance Wellness and employee assistance resources Employee stock purchase opportunities Short-term and long-term disability coverage About Us: Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person's needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

At Rimkus, our Built Environment Solutions team operates on a global scale with the advantage of local expertise. Our licensed engineers, architects, and technical specialists bring deep knowledge of regional requirements and industry best practices, enabling us to deliver customized, high-quality solutions that maximize the success of our clients' investments. With a comprehensive portfolio that spans nearly every engineering and architectural discipline, we help organizations plan, build, and manage assets with confidence. What sets us apart is our forward-thinking approach. We integrate carbon footprint reduction, resiliency, maintainability, and long-term sustainability into everything we do helping clients not just meet today's needs but prepare for tomorrow's challenges. From design and pre-construction through construction, closeout, and ongoing operations, we provide tailored support at every stage. By identifying potential issues before they arise, we mitigate risks, extend asset life, and reduce costly unplanned repairs. Whether an asset is newly constructed, leased, or purchased, our innovative solutions empower clients to operate more efficiently and sustainably. Joining Rimkus means being part of a team that's shaping the future of the built environment-one smart, resilient solution at a time. OVERVIEW The Electrical Design Engineer is experienced in the design of electrical and fire systems for the commercial real estate development industry. In this role, you will work with a team of engineers designing electrical and fire alarm systems for commercial, institutional, industrial, and multi-unit residential facilities. The salary range for this position is $130,000.00 - $150,000.00 and is dependent on education, experience, location, and certifications/licensure. ESSENTIAL JOB FUNCTIONS: * Applies technical knowledge to design solutions for complex and unique problems. * Electrical system design for distribution, power, fire alarm, and lighting for commercial and residential projects. * Manages multiple projects. * Uses many different equations, applications, and figures to ensure the proper procedure application, including electrical load and short circuit calculations * Perform existing conditions as-built documentation. * Coordinate with mechanical and plumbing engineers on projects. * Perform system evaluation and report generation. * Review submittals and perform final inspections on installations. * Ability to initiate, develop, and maintain mutually beneficial client relationships. * Understands and applies the National Electrical Code, NFPA 72, and MA State Building and Energy codes. * Coordination with other engineering team members. REQUIRED EXPERIENCE, EDUCATION, and CERTIFICATIONS: * B.S. Electrical Engineering degree or higher. * P.E. Preferred but not required (must be able to obtain). * Minimum of 10 years of experience in a similar/relevant position. * Electrical and fire systems design. * AutoCAD MEP and Revit experience strongly desired. * Familiar with the National Electrical Code, NFPA 72, and MA state building and energy codes. REQUIRED SKILLS AND ABILITIES: * The employee must be sharp, focused, and alert when conducting site inspections, speaking and interacting with clients, preparing written reports of findings, and testifying in deposition or trial. Clear vision and depth perception are also necessary. * Working knowledge of AutoCAD, Revit, Outlook, Word, and Excel. * Knowledge of electrical systems and designs for commercial, retail, and high-rise residential buildings. * Experience coordinating with disciplines internally as well as externally with consultants/architects. * Experience conducting and attending site visits, as well as preparing site reports. PHYSICAL DEMANDS, OVERTIME, and TRAVEL * Physical Demands - Work will be performed both in an office setting and at outside locations (i.e., client's office, industrial, construction, and/or residential sites). The employee is frequently required to stand, sit, climb ladders, bend, balance, stoop, kneel, crouch, talk, hear, and drive a motor vehicle to job sites. Employees may lift and/or move up to 50 pounds. Employees must be sharp, focused, and alert when conducting site inspections, speaking, and interacting with clients, as well as preparing drawings and written reports. Clear vision and depth perception are also necessary. * Overtime - This position is classified as salaried with an exempt FLSA status. Regular working hours are 8:00 a.m. to 5:00 p.m., Monday through Friday, with one hour for lunch. There will be periods where overtime will be required, which the employee will need to comply with in order to meet the demands of the position. * Travel Requirements - This position requires up to 25% travel. Some out-of-area and overnight travel may be required. Additional Information: NOW IS THE TIME to join this growing and stable company! We offer our full-time employees a competitive salary, bonus opportunities, and a complete benefits package that includes medical, dental, vision, life, disability, employer-matching 401(k), and opportunities for advancement! (*************** At Rimkus, we value a diverse and inclusive workplace where all employees feel valued and respected. We are committed to creating a work environment that supports and celebrates the unique perspectives and experiences of all employees. If you share our commitment to diversity and inclusivity and are excited about joining a welcoming and supportive team, we encourage you to apply for our open positions. Rimkus is an Equal Employment Opportunity (EEO) Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, disability, or protected veteran status. THIS JOB DESCRIPTION IS SUBJECT TO CHANGE AND DOES NOT CONSTITUTE A CONTRACT FOR EMPLOYMENT OR A GUARANTEE OF CONTINUED EMPLOYMENT. #LI-AL1 #LI-HYBRID

Job Description SNAPSHOT OF BECOMING OUR LICENSED ELECTRICAL TECH - SERVICE ELECTRICIAN: Company: We are ATD Mechanical Services Inc., a comprehensive plumbing, HVAC, and electrical company Pay: Depending on experience, you'll earn $36.00 - $50.00/hour Job Type: Full-time Schedule: 7:00 am - 4:00 pm, Monday - Friday Service Area: You'll be serving clients throughout our coverage area in Rhode Island If you're a talented electrical professional looking for your next big career move, keep reading to learn how you can reach new heights with us! WHAT'S IN IT FOR YOU: Our trustworthy and skilled team is the backbone of our success. We believe in supporting our people, so they can provide the best quality HVAC and plumbing service to our clients. That's why we provide a great benefits package and competitive compensation. Here are just a few of our perks: Medical Dental Retirement plans Paid time off (PTO) Sick time Tuition reimbursement Bonuses WHY WE'RE A GREAT CHOICE: ATD Mechanical Services Inc. installs and services plumbing and HVAC systems, furnaces, boilers, and water heaters for homes and businesses in Rhode Island and southeastern Massachusetts. We pride ourselves on our friendly and courteous customer service and high-quality results. WHAT YOU'LL BE DOING: Traveling to clients throughout our service area in Rhode Island Assessing electrical systems and equipment Diagnosing the root cause of any problems Performing accurate, high-quality repairs and maintenance Removing faulty parts and installing new components Completing exceptional work and providing professional customer service WHAT YOU'LL BRING TO THE TABLE: Rhode Island electrical license Valid driver's license Are you who we're looking for? If so, the initial application is short and mobile-friendly. Apply now and reach the next level as our Licensed Electrical Tech - Service Electrician! Please do not call us, we will reach out if we are interested in interviewing you, thank you! Job Posted by ApplicantPro

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: Active and transferable U.S. government issued security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance Security Clearance: DoD Clearance: Secret RTX Corporation is an Aerospace and Defense company that provides advanced systems and services for commercial, military and government customers worldwide. It comprises three industry-leading businesses - Collins Aerospace, Pratt & Whitney, and Raytheon. Its 185,000 employees enable the company to operate at the edge of known science as they imagine and deliver solutions that push the boundaries in quantum physics, electric propulsion, directed energy, hypersonics, avionics and cybersecurity. The company, formed in 2020 through the combination of Raytheon Company and the United Technologies Corporation aerospace businesses, is headquartered in Arlington, VA. The following position is to join our BBN team: For over 70 years, scientists and engineers in disciplines at RTX BBN Technologies have collaborated to solve real-world problems through research, exploration, development and prototyping. We challenge the status quo, pioneer new technologies, and create transformative solutions. We are seeking a Control Systems and Signal Processing Engineer to join our Physical Sciences & Systems business unit located a stone's throw from seaside Newport, Rhode Island. Responsibilities will include but are not limited to developing and evaluating signal processing and control algorithms in MATLAB, prototyping new capabilities and evaluating performance in simulation, analyzing data from real systems, and supporting evaluation and test both in-lab and in the field. The ideal candidate enjoys a multi-disciplinary role and is comfortable adapting to and identifying new technologies as needed. What You Will Do: * Develop and implement control systems, signal processing. and physical system representations primarily in MATLAB and SIMULINK. * Lead research and development in technical areas including supporting proposal and program planning efforts. * Collaborate with a cross-functional team testing your contributions and analyzing performance, to include unit-testing, integration testing, and performance testing. * Integrate components you develop into a larger system in preparation for real world testing and deployment. * Participate in system testing (on-site and at our customer's sites), associated data analysis, and reporting. * Interface with the customer as the resident SME. * Lead and mentor a technical team Qualifications You Must Have: * Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and minimum 8 years prior relevant experience or an Advanced Degree in a related field and minimum 5 years of experience or in absence of a degree, 12 years of relevant experience * Active and transferable U.S. government issued security clearance is required prior to start date * Graduate level training in modern multivariable control theory * Algorithm development experience in MATLAB * Physical system modeling experience (SIMULINK preferred). * Experience with time and frequency domain signal processing and data analysis. * Experience implementing modern multivariable real-time control system and signal processing algorithms. * Hands on experience with time and frequency domain testing, data analysis, and system characterization. * Travel required to support testing Qualifications We Prefer: * Graduate degree in Mechanical Engineering, Electrical/Computer Engineering, Physics, or relevant disciplines * Simulink and MATLAB experience * Experience with real-time signal processing systems * Experience with adaptive signal processing * System level requirements verification and sell-off * Python and C ++ programming experience * Linux experience * Experience in the full life cycle development of a signal processing system from concept design through production What We Offer Whether you're just starting out on your career journey or are an experienced professional, we offer a robust total rewards package with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance and child/adult backup care. * Relocation Assistance available * This position is Onsite at our Middletown, RI office To help you achieve your goals, BBN will provide: * A strong leadership team well-versed in government R&D. * A collaborative and collegial environment to push state-of-the-art research. * A technically competent pool of research scientists who are willing to mentor, listen, and help you refine your research vision and goals. * Business development, programmatic, contracting, finance, and HR support. * Access, through RTX, to opportunities that help transition your research and ultimately see it fielded. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 101,000 USD - 203,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

duties and Responsibilities: Design system modernization and capabilities expansions to meet emerging Navy needs Analysis for and development of Engineering Change Instructions and Engineering Change Proposals Assess installation and system requirements to determine equipment layout Perform and presentation of gap, fault/failure, and performance analyses Support/perform modeling, simulation and prototyping for enhanced and new systems Provide recommendations for process improvements to existing systems and operational processes Troubleshoot, recommend solutions for maintenance and enhancements to Non Propulsion Submarine/Ship systems including Combat Systems and associated Weapons (Torpedoes, Missiles, Other Payloads) in particular, as well as, Launchers, Sonar, Radar, Periscopes, EW, Navigation systems interfaces at NUWCDIVNPT and/or on-site platforms Conduct test and evaluation and quality assessments for system requirements compliance, interoperability, reliability and cyber invulnerability Develop reports and recommendation papers describing results of analyses, testing and problem investigations Coordinate with Team Lead and work with the engineering team to support upgrades to existing weapon systems to meet data requirements Collect and assess technical data associated with planned, active, and concluded platform Modernization and TEMPALT installation activities, including Pre-Installation Check-Outs (PICOs) and Post-Installation System Operational Verification Tests (SOVTs) Develop, update, and deliver individual and cumulative reports to document the installation activities including status, test results, and issues. Document and present trade studies as to the risks, benefits, feasibility of future systems Develop and Review drawing packages Coordinate and support platform technical data package development and delivery Develop and review test plans, test procedures, and requirements traceability matrices Developing Concept of Operations (CONOPS) documentation, performance specifications, interface documentation, operational procedures Perform and/or support, functional, integration, system, factory acceptance and environmental testing events Develop program status reports such as technical assessments, risk assessments, technical recommendations, or technical information Assess current system capabilities against current and near-term needs and provide technical recommendations to resolve gaps by evaluating and resolving system failure reports, obsolescence and material support issues, and other inputs from the Fleet Requirements/Skills: Bachelor's degree in an Engineering Discipline (Electrical, Mechanical, Systems, etc.) preferred, will consider a BS in STEM fields with sufficient direct Engineering Experience. In lieu of a degree, candidates with significant, demonstrated experience operating one of more of DoD and Navy Non-Propulsion Electronic-Mechanical Systems especially, Combat Control, Weapons (Torpedoes, Missiles, Payloads), Launcher, USW Sensor, Electronic Warfare, Imaging, and/or Radar systems (especially Submarine specific equipment) will be strongly considered. Experience and knowledge associated with engineering functions related to design, troubleshooting, analysis, reporting, and/or testing of aforementioned complex systems Candidates must be able to work independently, collaboratively, and interface regularly with a wide range of client personnel. Proficiency with MS office applications, especially Word, Excel, and PowerPoint, as well as Adobe Acrobat and MATLAB. Mentor technical team members and provide direct technical team tasking/scheduling guidance. Support scheduling, funding, and resource needs in conjunction with Program Manager U. S. Citizenship and ability to obtain and maintain a Department of Defense secret security clearance. An active security clearance is preferred. Working Place: Newport, Rhode Island, United States Company : Rite Solutions

McLaughlin Research Corporation has an immediate opening for a Mid-Level Electrical Engineer supporting the Naval Undersea Warfare Center (NUWC) Division Newport. The Naval Undersea Warfare Center (NUWC) is the United States Navy's full-spectrum research, development, test and evaluation, engineering and fleet support center for submarines, autonomous underwater systems, and offensive and defensive weapons systems associated with undersea warfare. The qualified individual will have programming experience using C++ and MATLAB. Experience with Arduino and Raspberry Pi systems is preferred. This position will provide system support for material reverse-engineering and exploitation projects to determine characteristics, capabilities, and limitations of said systems. Requirements Bachelor's level degree in Electrical/Electronics Engineering. 3-5 years experience Experience with testing hardware on US ranges is a plus. C++, MATLAB, Arduino and Raspberry Pi experience Secret level clearance. Equal Employment Opportunity Statement: McLaughlin Research Corporation is an Equal Opportunity and Affirmative Action Employer. It is our policy to recruit, hire, promote, and train for all positions without regard to age, race, creed, religion, national origin, gender identity, marital status, sexual orientation, family responsibilities, pregnancy, minorities, genetic information, status as a person with a disability, amnesty or status as a protected veteran, and to base all such decisions upon the individual's qualifications and ability to perform the work assigned, consistent with contractual requirements and all federal, state and, local laws. EEO is the Law: Applicants and employees are protected under Federal law from discrimination.

MIKEL invests in people and technology - empowering the creative process, building responsive relationships, and propelling innovative solutions from conception to completion for the U.S. Navy. MIKEL is a woman owned small business that has been providing Undersea Warfare Solutions to the Department of Defense since the company's inception in 1999. Be a part of our dynamic team whose solutions and services enable the Navy to solve their toughest problems and meet their mission requirements. We have undersea operations experience, combined with engineering and specific subject matter expertise, that provides an in-depth understanding of the problem and a novel, innovative and cost-effective solution. MIKEL is committed to providing an environment that challenges its employees to use and advance their skills and knowledge to provide solutions that exceed customer expectations. Position: Electronics Repair Engineer Nature of Role: Provide support with electronics evaluation and repair and In-Service Engineering support for Naval Electronics Systems in Fall River MA and Newport RI. The qualified candidate will perform multi-faceted tasking with emphasis on electronics evaluation/testing/repair, and US Naval fleet support. Responsibilities: include but are not limited to: Receive, process and track electronic assemblies from US Naval sources Inspect, Evaluate, Troubleshoot and Repair electronic assemblies, at the component level, in accordance with US NAVY and local work instructions Develop/Update Technical Data Packages for conducting evaluations and repairs Develop/Update local work instructions for conducting evaluations and repairs Conduct receipt inspection of materials and parts Maintain and conduct audits on, material and repair parts inventories Perform research and purchases of repair parts Maintain proprietary laboratory test units and systems to ensure all testing devices are in proper operating condition and ready for immediate use Prepare/Maintain reports and written laboratory procedures to reflect the current and up-to-date standards and practices Provide In-Service Engineering Support to US Naval Ships and Submarines Develop relationships with Government customers and source new work Requirements: Ability to Obtain/maintain SECRET Clearance. Effective communication, both verbal and written. Possess ability to work in a team environment. Complete tasks in a timely manner to support repair deadlines and/or ship's schedules. Possess exceptional organizational, critical thinking skills, and attention to detail. Proficiency in MS Office Suite, with emphasis on Microsoft Word, Excel and PowerPoint Ability to communicate, both orally and in writing, with all levels of the contractor and government/military organization Ability to operate various types of electronic test equipment (Digital multi meter, oscilloscope, signal injector…) Ability to read and comprehend electronics schematics and diagrams Ability to conduct precision hand soldering of “through-hole” and “surface-mount” electronic components on multi-layer circuit cards Ability to lift 40 lbs This work may require travel (less than 10%) Experience: 10 + years related electronics experience Knowledge of US Government depot level repair policies and practices Familiarity with Navy funding sources Knowledge of AC and DC voltage circuits, concepts, troubleshooting, and measurement Experience with soldering wires & terminals, through hole and surface mount components Experience with de soldering methods and circuit card preservation practices. Knowledge of logic circuits, and devices Familiarity with various types of computer hardware and software is desired Work Location: Fall River MA/Newport RI, minimal-to-no telework available. MIKEL offers a competitive salary and a comprehensive benefits package that includes Medical/Dental/Vision Insurance, Flexible Spending Account (FSA), 401k Retirement Plan, Life Insurance, Disability Insurance, Paid Time Off (PTO), and Tuition Reimbursement. Department of Defense Secret Security Clearance or higher is required at time of hire. Applicants selected will be subject to a U.S. Government security investigation and must meet eligibility requirements for access to classified information. Due to the nature of work performed within our facilities, U.S. citizenship is required. MIKEL is an Equal Opportunity Employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Rite-Solutions, Inc. is seeking Combat Systems/Weapons/Platform Systems Engineer/Technician candidates who will provide direct support to the Naval Undersea Warfare Center (NUWC). This position is located on-site at NUWCDIVNPT Newport, RI. Principal duties and Responsibilities: Design system modernization and capabilities expansions to meet emerging Navy needs Analysis for and development of Engineering Change Instructions and Engineering Change Proposals Assess installation and system requirements to determine equipment layout Perform and presentation of gap, fault/failure, and performance analyses Support/perform modeling, simulation and prototyping for enhanced and new systems Provide recommendations for process improvements to existing systems and operational processes Troubleshoot, recommend solutions for maintenance and enhancements to Non Propulsion Submarine/Ship systems including Combat Systems and associated Weapons (Torpedoes, Missiles, Other Payloads) in particular, as well as, Launchers, Sonar, Radar, Periscopes, EW, Navigation systems interfaces at NUWCDIVNPT and/or on-site platforms Conduct test and evaluation and quality assessments for system requirements compliance, interoperability, reliability and cyber invulnerability Develop reports and recommendation papers describing results of analyses, testing and problem investigations Coordinate with Team Lead and work with the engineering team to support upgrades to existing weapon systems to meet data requirements Collect and assess technical data associated with planned, active, and concluded platform Modernization and TEMPALT installation activities, including Pre-Installation Check-Outs (PICOs) and Post-Installation System Operational Verification Tests (SOVTs) Develop, update, and deliver individual and cumulative reports to document the installation activities including status, test results, and issues. Document and present trade studies as to the risks, benefits, feasibility of future systems Develop and Review drawing packages Coordinate and support platform technical data package development and delivery Develop and review test plans, test procedures, and requirements traceability matrices Developing Concept of Operations (CONOPS) documentation, performance specifications, interface documentation, operational procedures Perform and/or support, functional, integration, system, factory acceptance and environmental testing events Develop program status reports such as technical assessments, risk assessments, technical recommendations, or technical information Assess current system capabilities against current and near-term needs and provide technical recommendations to resolve gaps by evaluating and resolving system failure reports, obsolescence and material support issues, and other inputs from the Fleet Requirements/Skills: Bachelor's degree in an Engineering Discipline (Electrical, Mechanical, Systems, etc.) preferred, will consider a BS in STEM fields with sufficient direct Engineering Experience. In lieu of a degree, candidates with significant, demonstrated experience operating one of more of DoD and Navy Non-Propulsion Electronic-Mechanical Systems especially, Combat Control, Weapons (Torpedoes, Missiles, Payloads), Launcher, USW Sensor, Electronic Warfare, Imaging, and/or Radar systems (especially Submarine specific equipment) will be strongly considered. Experience and knowledge associated with engineering functions related to design, troubleshooting, analysis, reporting, and/or testing of aforementioned complex systems Candidates must be able to work independently, collaboratively, and interface regularly with a wide range of client personnel. Proficiency with MS office applications, especially Word, Excel, and PowerPoint, as well as Adobe Acrobat and MATLAB. Mentor technical team members and provide direct technical team tasking/scheduling guidance. Support scheduling, funding, and resource needs in conjunction with Program Manager U. S. Citizenship and an active Department of Defense security clearance. Previous Experience in the following elements/technical areas is required: AN/BYG-1, SWFTS architecture, (hardware/software/tactical equipment ) for predecessor, current and future Combat Control Systems; Knowledge of Launcher Systems Equipment; Torpedoes, Missiles, Payload Control/Strike Operations and associated Platform Non-Propulsion Electronics Systems (NPES) equipment Ability for analysis and design/development/debug for Combat Systems, Platform NPES equipment Detailed Knowledge of Submarine Operational Documentation; Ability to Write, Edit, Maintain, especially Submarine Firing Craft Procedures Knowledge of Navy/DoD acquisition processes including, Rapid Prototyping, COTS Insertion, and Spiral Development Processes Knowledge of US Navy Submarine land-based laboratory testing and evaluation environment for Combat Systems and associated interfaces network Combat Systems/Torpedo and Missiles Operations and Functions; NPES testing methodology at the developmental, functional, integration, systems and platform level Basic knowledge of team management, team building, and reporting Excellent communication and presentation skills with the ability to interface with technical personnel, managers, and customers Experience in building customer relationships and communicating with integrated product teams Experience with process improvement methods, practices, and procedures (i.e., CMMI) Minimum 4 years' related experience Who are we? Rite-Solutions, Inc. is a CMMI Level III and CMMC 2.0 Level 2 certified organization. We are innovative, growing and adhere to the highest standards for handling controlled unclassified information (CUI). We value the experience of the employee, their wellbeing, and their goals on a personal professional level as part of the key fabric in building and maintaining a culture rich experience for the employee and their family. This commitment to our company and our employees has been recognized as we were awarded: "Great Place to Work" Certification in 2022, 2023, 2024, and 2025; and Hire VETs Medallion Award in 2021, 2022, 2023, 2024, and 2025! All positions require a pre-employment background check. As an EOE/AA employer, Rite-Solutions will not discriminate in its employment practices due to an applicant's race, color, religion, sex, sexual orientation, gender identity, national origin, and veteran or disability status Public Information

Tele-Consultants, Inc. (TCI) is seeking an Electrical or Systems Engineer to join our team in support of the Naval Undersea Warfare Center Division Newport (NUWCDIVNPT). Job responsibilities include, but are not limited to: • The candidate will work directly with NUWC Engineers reviewing engineering drawings developed according to design specifications; • Review, comment and adjudicate engineering drawing packages and related documentation; • Analyze, design, and review communications systems designs to ensure that the design requirements are met. Education: • Minimum of Bachelor's degree in Electrical, Electronics or Systems Engineering from an accredited university; • Experience with engineering and Design Drawings. Additional Qualifications: • Any relevant experience with Common Submarine Radio Room (CSRR), Consolidated Afloat Networks and Enterprise Services (CANES) and/or Automated Digital Network Systems (ADNS) is a big PLUS! • Experience with Submarine Electronics, QA Material Process; • Experience with Test Equipment including O'scope, spectrum analyzers, signal generator, and network analyzers; • Proficiency with Microsoft Office products; • Proficiency with the MS Visio drawing software and any CAD software also a PLUS! The nature of this position requires U.S. citizenship and the ability to pass a thorough background investigation. The primary location for performance of the work will be in Newport, RI with very limited travel, if any, required within the continental United States. We offer a competitive compensation commensurate with the technical and professional qualifications, a great benefits package, and an excellent work environment. As a federal government contractor, we participate in the e-Verify program. If you possess the qualifications for this position and you're ready to join a team of professionals committed to supporting our DoD clients by providing the outstanding level of service they've come to expect, we want to hear from you. Tele-Consultants, Inc. is an Equal Employment Opportunity Employer.

As part of our Corporate Engineering team the Control Systems Engineer II will participate in project teams to design, purchase, and install equipment. They will assist Plants in troubleshooting and problem solving when called upon as well as design processes for potential projects. Main Duties or Responsibilities: * Design and draft elements relating to projects for implementation. * Contact manufacturers and vendors for materials required to support proposed design. * Receive quotes and delivery schedules on projects. * File documentation of engineering drawings. * Ensure Company safety procedures are being adhered to. * Writing Ladder Logic on new projects and existing equipment. * Perform HMI design. * Perform basic computer system design - Web Gateway, Virtualization etc * Perform basic network design on new projects and system upgrades. * Provide technical support for facilities worldwide. * Perform additional duties and responsibilities as assigned. * Perform Control Cabinet Design * Participate in maintenance as needed. Skills & Experience or Qualifications: * Bachelor's Degree in Electrical Engineering or equivalent experience in a field of study such as electrical, computer systems. * Position requires between 5-7 years of engineering experience * Strong Skills in Ladder Logic, preferably with Allen Bradley systems. ie. PLC 5, SLC and Control Logix. * Strong Skills in Solidworks Electrical * Strong Skills in HMI design, preferably with FactoryTalk and Ignition * Ability to help evaluate project requirements and apply the appropriate solutions. * Strong Skills with Ethernet/IP and basic networking best practices. * Understanding of plant power distribution equipment and controls. * Understanding of project engineering/project management. * Strong Code skills - Python and Java * Must combine problem-solving techniques with innovation for best solutions. * Must be able to look at the big picture as well as the details. This type of analysis and decision-making is needed daily. Travel - estimated 30% with some weekend overnights Physical Requirements: * Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. * Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards * Must be able to lift and carry up to 50 lbs. * Ability to perform duties under specific time requirements * Ability to adapt to changing duties and responsibilities Must be able to talk, listen and speak clearly on telephone

At REGENT, we're on a mission to revolutionize regional transportation between coastal cities. We're not just building vehicles, we're creating a new category of transportation: the seaglider. These groundbreaking wing-in-ground-effect craft travel just above the water's surface, combining the speed of an airplane with the low operating costs of a boat. Capable of 180 miles at 180 mph on today's battery tech (and up to 400 miles with next-gen batteries), seagliders will unlock fast, affordable, and sustainable coastal transit for passengers and cargo - connecting cities, islands, and communities like never before. Backed by leading investors and powered by a team of passionate, forward-thinking engineers, builders, and operators, we're now scaling from a breakthrough prototype to full production - and building the team to make it happen. Role Overview As an Electrical Engineering Intern at REGENT, you will work at the intersection of the systems that power, move, and control our seagliders. This multidisciplinary role is primarily focused on electrical engineering, with direct exposure to propulsion and actuation systems that push the boundaries of high-performance maritime aviation. You'll support the design, integration, and testing of critical vehicle subsystems-from high-voltage distribution to electromechanical actuators to power-dense propulsion hardware. If you're energized by working at the intersection of cutting-edge innovation, real-world impact, and hands-on engineering, you'll be in the right place - and we'd be thrilled to have you on the team! What You'll Do As an intern in this role, you may: Electrical Systems * Support design, layout, and documentation for HV/LV power distribution and signal networks * Develop and test custom PCBs for sensing, control, and actuation * Build, route, and validate wire harnesses across electrical, propulsion, and actuation subsystems * Create and maintain schematics, harness drawings, and test documentation Propulsion & Actuation * Assist with the electrical integration of propulsion and actuation systems * Support testing of motors, actuators, and power electronics with a focus on instrumentation and safety * Troubleshoot hardware issues on benches, in the lab, and on the vehicle Simulation, Testing & Tools * Use modeling/analysis tools (MATLAB/Simulink, LabVIEW, etc.) to evaluate system performance * Build and improve test setups, benches, and automated test equipment * Capture and analyze data to support subsystem validation What You'll Bring * Currently pursuing a degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or similar * Experience with electronics lab tools (oscilloscope, power supplies, DMMs, loads, soldering tools) * Understanding of digital, analog, or power electronics fundamentals * Ability to interpret electrical schematics and/or mechanical drawings * Interest in multidisciplinary engineering across electrical, mechanical, and control systems Bonus Experience * Experience with motors, actuators, sensors, or motor controllers * Familiarity with Python, MATLAB, or similar tools * Exposure to PCB design tools (Altium, KiCad, Eagle) * Comfort with high-voltage or high-power systems Who We're Looking For * Collaborative Team Player: You believe that great things happen when teams work together. You communicate effectively and collaborate with engineers, stakeholders, and other cross-functional teams to align on goals and move projects forward. You bring people together, ensuring that everyone is on the same page and moving towards a shared vision. * Creative Problem Solver: You thrive on tackling complex challenges and finding innovative solutions. Whether you're resolving installation challenges, debugging elusive electrical issues, or adapting on the fly during integration and test, you bring a practical, inventive mindset to every problem. You don't just patch issues - you improve processes, anticipate downstream impacts, and help turn one-off fixes into scalable solutions that raise the bar for future builds. * Adaptable & Agile: In a fast-paced, ever-evolving startup environment, you quickly adapt to changing priorities and requirements. You approach challenges with a calm, resilient mindset, and know how to pivot and adjust your approach as needed, ensuring that progress continues without missing a beat. * Innovative Mindset: You're driven by curiosity and a passion for technology. You're passionate about driving continuous improvement, embracing new technologies and methodologies to enhance efficiency, quality, and team performance. What We Offer * Competitive compensation * Housing Stipend available for those temporarily moving to join our team * Daily, free catered lunches * Learning & professional development opportunities * Meaningful projects that make an impact * Mentorship & guidance from experienced team members If you're ready to take on an exciting challenge, grow with us, and make a lasting impact, we want to hear from you. Even if you don't meet every requirement, but you see yourself contributing to our mission, we encourage you to apply! We value diverse skillsets and experiences and believe in the potential of passionate individuals to make a big impact. Equal Opportunity Employer REGENT is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive work environment. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, or any other characteristic protected by law.

Join us to help save lives: consider a career at Amphenol Alden Products! At Amphenol Alden, we are proud to play a vital role in delivering exceptional care to patients worldwide. Every device we support helps care for someone's loved one-a responsibility we approach with the utmost dedication. Family values are at the heart of who we are. Founded more than 80 years ago as a family business, we've preserved our dynamic, entrepreneurial spirit while growing into a key part of a global corporation. We recognize that our employees are the cornerstone of our success, which is why we prioritize career development, work-life balance, and a supportive environment. As part of the Amphenol Corporation, opportunities for advancement extend well beyond our local sites-when openings arise across our sister companies, we look to our top performers first. Driven by continued growth, Amphenol Alden is seeking talented professionals to join our team. We are excited to announce an opening for an Electrical Test Engineer at our Stoughton, MA location. Job Summary: Define, develop, and execute comprehensive electrical test plans to evaluate key performance parameters. This role requires expertise in high-frequency electrical testing and an understanding of IEEE, IEC, and other relevant standards. Beyond testing, the Electrical Test Engineer will also manage the electrical test lab equipment, ensuring the proper maintenance, calibration, and operation of critical test equipment, such as vector network analyzers (VNAs), oscilloscopes, time-domain reflectometers (TDRs), LCR meters, and hipot testers. They will also be responsible for troubleshooting electrical performance issues, analyzing test data, and providing recommendations to improve product designs. Principal Duties and Responsibilities: * Develop, define, and execute electrical test plans for medical cable assemblies, connectors, and specialty cables. * Conduct signal integrity (SI), power integrity (PI), impedance, capacitance, resistance, crosstalk, insertion loss, return loss, and high voltage hipot testing to validate product performance. * Perform DC and AC testing on cable assemblies and connectors to ensure compliance with medical, IEEE, IEC, and industry-specific electrical standards. * Evaluate EMI shielding effectiveness, dielectric breakdown, contact resistance, and insertion/extraction force testing. * Perform accelerated ageing and life testing via temperature/humidity, autoclave and STERRAD testing. Skills/Qualifications Needed: * Bachelor's degree in electrical engineering, electronics engineering, or related field. * 2+ years of experience in electrical testing, in high-speed cables, connectors, or medical device manufacturing. * Hands-on experience with vector network analyzers (VNAs), oscilloscopes, TDRs, LCR meters, and other advanced electrical test equipment Other Preferred Qualifications: * Experience in managing and maintaining electrical test laboratory equipment is a plus. * Experience with medical device documentation requirements. * Experience in testing high speed USB and HDMI products is a plus. Amphenol Alden Products is an Equal Opportunity Employer

**What Commercial Technologies Software Engineering contributes to Cardinal Health** Commercial Technologies manages the enterprise's portfolio of commercial technologies to maximize the business value of the technologies and enhance the customer experience. This function creates strategies for the portfolio and innovative solutions based on relationships with business leaders, develops back-end solutions and capabilities, and improves the front-end experience. Commercial Technologies Software Engineering develops design options, process improvements and back-end solutions for commercial technologies to maximize performance and suitability for business needs. This job family manages engineering projects and plans for commercial technologies and interfaces with product managers to develop objectives. This job family assesses product systems, identifies opportunities for process and system improvements, and develops solutions through application of engineering principles. **Responsibilities** + Responsible for designing, developing, implementing, and supporting applications, systems and IT products required to achieve business objectives. + Plans and executes system implementations that ensure success and minimize risk of system outages or other negative production impacts. + Demonstrates problem solving ability that allows for effective and timely resolution of system issues including but not limited to production outages. + Analyze production system operations using tools such as monitoring, capacity analysis and outage root cause analysis to identify and drive change to ensure continuous improvement in system stability and performance. + Provide technical guidance to managed service partners. + Participate in code and design planning/reviews to ensure industry standards and best practices are being met + Establish and develop relations with business stakeholders + Design & customize technological systems and platforms to improve customer experience + Ensure aligned objectives and execution across internal and external stakeholders to create mutually beneficial partnerships to identify areas of growth and innovation + Advise on short and long term technology and growth planning + Ensure product and services are compliant with company's policies + Manage strategic partnerships with preferred technology vendors + Recommends new practices, processes, metrics, or models + Must be able to define tasks, milestones, and deliverables that meet stated project objectives + Independently determines method for completion of new projects + Serve as an escalation point for complex functional and technical issues + Provide end-to-end views on how all components fit together + "Connecting dots" across various business and technology areas **Qualifications** + 4-8 years of experience, preferred + Bachelor's degree in related field, or equivalent work experience, preferred + Experience in T-SQL, Windows Servers, .Net, Azure Logic Apps & pipelines, Swaggerhub, APIGEE, Splunk, Postman, Azure devops + Experience with GuardianRX, Cperx, Queen City, CMS Wordlink, Omnisys, and Genesis a PLUS + Experience in designing, building, deploying, managing, and enhancing applications within the Software Development Life Cycle (SDLC) processes including requirement analysis and system design, and/or software engineering principles + Experience with CI/CD pipelines such as Azure Dev Ops, GIT + Working experience translating business objectives into Strategic technology plans + Strong leadership skills, including the ability to effectively partner with business leadership and key business stakeholders. + Strategic mindset and ability to lead with business objectives + Strong understanding of infrastructure platforms such as operating systems, databases, application servers, cloud. + Strong understanding of industry trends and relevant emerging technologies + Strong problem solving and analytical skills, and the ability to communicate technical information to both technical and non-technical users across various domains. + Perspective on industry-wide best-practices + Experience in Healthcare industry a plus + Experience in data analytics and/or data science a plus + Enterprise or Solution Architecture experience a plus **What is expected of you and others at this level** + Applies comprehensive knowledge and a thorough understanding of concepts, principles, and technical capabilities to perform varied tasks and projects + May contribute to the development of policies and procedures + Works on complex projects of large scope + Develops technical solutions to a wide range of difficult problems + Solutions are innovative and consistent with organization objectives + Completes work; independently receives general guidance on new projects + Work reviewed for purpose of meeting objectives + May act as a mentor to less experienced colleagues **Anticipated salary range:** $93,500 - $140,280 **Bonus eligible:** No **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 10/30/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************

Collabera Inc (Staffing Firm). We are based out of Morristown, NJ and we have been providing contingent labor to our clients for last 25 years. In 2015 we placed more than 6,000 contractors across select 100+ clients that we service. End client for this project is a large legal organization with operations in more than 100 countries and has more than 50,000 employees around the world. For eight consecutive years, Fortune has named this company as World's ‘Most Admired Companies to work for'. Job Description A Senior Research Engineer for the DVT Prevention business will substantially contribute to the design and development and sustaining engineering activities of Intermittent pneumatic compression devices used to prevent Deep Vein Thrombosis, a leading cause of morbidity in hospitals. These activities will cover all phases of the product life cycle from concept through end of life. The individual in this position will be called upon to work in a dynamic team environment lead projects, contribute to design decisions and execute requirements across a wide variety of projects. The devices are electro-mechanical pneumatic systems that control the inflation of pneumatic compression garments used in the prevention of Deep Vein Thrombosis (DVT). The ability to execute hardware electronic designs with embedded software is a key requirement. Attention to detail and working knowledge of regulations for the medical device industry are essential. The engineer must be able to work in a team environment and be able to communicate clearly across all disciplines including Quality Assurance, Regulatory Affairs, Manufacturing, Marketing, Clinical Affairs and outside design partners and regulatory agencies. Qualifications Education: BS, Electrical Engineering or Biomedical engineering with electrical engineering concentration Minimum Experience: Bachelor's plus a minimum of 5 years relevant medical device experience; or Master's plus a minimum of 3 years relevant medical experience; Skills/Qualifications: • PCB design software such as PCAD, PADS OrCAD or Altium • Familiarity with electrical and medical device safety standards • Requirements development and management for embedded systems • Knowledge of Good Manufacturing Practices (GMP), Quality System Regulations (FDA QSR) and design controls • Requirements Tracing • Design for Six Sigma techniques and methodologies and knowledge of Statistical Analysis, and Design of Experiments. Working knowledge of Minitab or equivalent statistical analysis tools • Strong written, verbal, and presentation skills • MS office tools including Word, Excel, PowerPoint, Project • Thorough understanding of engineering practices, product safety and root cause analysis. Additional Information To get further details or to apply, please contact: sagar.rathore(at)collabera ************

Job Description At REGENT, we're on a mission to revolutionize regional transportation between coastal cities. We're not just building vehicles, we're creating a new category of transportation: the seaglider. These groundbreaking wing-in-ground-effect craft travel just above the water's surface, combining the speed of an airplane with the low operating costs of a boat. Capable of 180 miles at 180 mph on today's battery tech (and up to 400 miles with next-gen batteries), seagliders will unlock fast, affordable, and sustainable coastal transit for passengers and cargo - connecting cities, islands, and communities like never before. Backed by leading investors and powered by a team of passionate, forward-thinking engineers, builders, and operators, we're now scaling from a breakthrough prototype to full production - and building the team to make it happen. Role Overview As an Electrical Engineering Intern at REGENT, you will work at the intersection of the systems that power, move, and control our seagliders. This multidisciplinary role is primarily focused on electrical engineering, with direct exposure to propulsion and actuation systems that push the boundaries of high-performance maritime aviation. You'll support the design, integration, and testing of critical vehicle subsystems-from high-voltage distribution to electromechanical actuators to power-dense propulsion hardware. If you're energized by working at the intersection of cutting-edge innovation, real-world impact, and hands-on engineering, you'll be in the right place - and we'd be thrilled to have you on the team! What You'll Do As an intern in this role, you may: Electrical Systems Support design, layout, and documentation for HV/LV power distribution and signal networks Develop and test custom PCBs for sensing, control, and actuation Build, route, and validate wire harnesses across electrical, propulsion, and actuation subsystems Create and maintain schematics, harness drawings, and test documentation Propulsion & Actuation Assist with the electrical integration of propulsion and actuation systems Support testing of motors, actuators, and power electronics with a focus on instrumentation and safety Troubleshoot hardware issues on benches, in the lab, and on the vehicle Simulation, Testing & Tools Use modeling/analysis tools (MATLAB/Simulink, LabVIEW, etc.) to evaluate system performance Build and improve test setups, benches, and automated test equipment Capture and analyze data to support subsystem validation What You'll Bring Currently pursuing a degree in Electrical Engineering, Computer Engineering, Mechanical Engineering, or similar Experience with electronics lab tools (oscilloscope, power supplies, DMMs, loads, soldering tools) Understanding of digital, analog, or power electronics fundamentals Ability to interpret electrical schematics and/or mechanical drawings Interest in multidisciplinary engineering across electrical, mechanical, and control systems Bonus Experience Experience with motors, actuators, sensors, or motor controllers Familiarity with Python, MATLAB, or similar tools Exposure to PCB design tools (Altium, KiCad, Eagle) Comfort with high-voltage or high-power systems Who We're Looking For Collaborative Team Player: You believe that great things happen when teams work together. You communicate effectively and collaborate with engineers, stakeholders, and other cross-functional teams to align on goals and move projects forward. You bring people together, ensuring that everyone is on the same page and moving towards a shared vision. Creative Problem Solver: You thrive on tackling complex challenges and finding innovative solutions. Whether you're resolving installation challenges, debugging elusive electrical issues, or adapting on the fly during integration and test, you bring a practical, inventive mindset to every problem. You don't just patch issues - you improve processes, anticipate downstream impacts, and help turn one-off fixes into scalable solutions that raise the bar for future builds. Adaptable & Agile: In a fast-paced, ever-evolving startup environment, you quickly adapt to changing priorities and requirements. You approach challenges with a calm, resilient mindset, and know how to pivot and adjust your approach as needed, ensuring that progress continues without missing a beat. Innovative Mindset: You're driven by curiosity and a passion for technology. You're passionate about driving continuous improvement, embracing new technologies and methodologies to enhance efficiency, quality, and team performance. What We Offer Competitive compensation Housing Stipend available for those temporarily moving to join our team Daily, free catered lunches Learning & professional development opportunities Meaningful projects that make an impact Mentorship & guidance from experienced team members If you're ready to take on an exciting challenge, grow with us, and make a lasting impact, we want to hear from you. Even if you don't meet every requirement, but you see yourself contributing to our mission, we encourage you to apply! We value diverse skillsets and experiences and believe in the potential of passionate individuals to make a big impact. Equal Opportunity Employer REGENT is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive work environment. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, disability, or any other characteristic protected by law.

Job Description Join us to help save lives: consider a career at Amphenol Alden Products! At Amphenol Alden, we are proud to play a vital role in delivering exceptional care to patients worldwide. Every device we support helps care for someone's loved one-a responsibility we approach with the utmost dedication. Family values are at the heart of who we are. Founded more than 80 years ago as a family business, we've preserved our dynamic, entrepreneurial spirit while growing into a key part of a global corporation. We recognize that our employees are the cornerstone of our success, which is why we prioritize career development, work-life balance, and a supportive environment. As part of the Amphenol Corporation, opportunities for advancement extend well beyond our local sites-when openings arise across our sister companies, we look to our top performers first. Driven by continued growth, Amphenol Alden is seeking talented professionals to join our team. We are excited to announce an opening for an Electrical Test Engineer at our Stoughton, MA location. Job Summary: Define, develop, and execute comprehensive electrical test plans to evaluate key performance parameters. This role requires expertise in high-frequency electrical testing and an understanding of IEEE, IEC, and other relevant standards. Beyond testing, the Electrical Test Engineer will also manage the electrical test lab equipment, ensuring the proper maintenance, calibration, and operation of critical test equipment, such as vector network analyzers (VNAs), oscilloscopes, time-domain reflectometers (TDRs), LCR meters, and hipot testers. They will also be responsible for troubleshooting electrical performance issues, analyzing test data, and providing recommendations to improve product designs. Principal Duties and Responsibilities: Develop, define, and execute electrical test plans for medical cable assemblies, connectors, and specialty cables. Conduct signal integrity (SI), power integrity (PI), impedance, capacitance, resistance, crosstalk, insertion loss, return loss, and high voltage hipot testing to validate product performance. Perform DC and AC testing on cable assemblies and connectors to ensure compliance with medical, IEEE, IEC, and industry-specific electrical standards. Evaluate EMI shielding effectiveness, dielectric breakdown, contact resistance, and insertion/extraction force testing. Perform accelerated ageing and life testing via temperature/humidity, autoclave and STERRAD testing. Skills/Qualifications Needed: Bachelor's degree in electrical engineering, electronics engineering, or related field. 2+ years of experience in electrical testing, in high-speed cables, connectors, or medical device manufacturing. Hands-on experience with vector network analyzers (VNAs), oscilloscopes, TDRs, LCR meters, and other advanced electrical test equipment Other Preferred Qualifications: Experience in managing and maintaining electrical test laboratory equipment is a plus. Experience with medical device documentation requirements. Experience in testing high speed USB and HDMI products is a plus. Amphenol Alden Products is an Equal Opportunity Employer Powered by ExactHire:183696