Electrical engineer jobs in Sonoma, CA - 957 jobs

Project Engineer - Electrical (San Francisco, CA) A well-established Bay Area electrical contractor is seeking a Project Engineer to support major public-works projects across San Francisco. The company specializes in street-lighting systems, traffic signals, low-voltage infrastructure, ITS/communications, and overhead traction power systems for municipal transit. This role is ideal for an electrical engineer who wants to build a long-term career in electrical infrastructure and public utilities. Role Overview The Project Engineer will support project planning, coordination, documentation, and field execution. You'll work closely with Project Managers, Superintendents, and field crews to ensure successful delivery of complex municipal electrical projects. Key Responsibilities Project Coordination & Documentation Prepare RFIs, submittals, as-builts, change orders, and close-out packages Assist in developing schedules, phasing plans, and manpower forecasts Track quantities, production, materials, and delivery schedules Maintain communication with suppliers, subcontractors, and city inspectors Technical & Engineering Support Review and interpret plans, specifications, one-lines, and signal/lighting layouts Support engineering tasks for: Street-lighting and roadway illumination Traffic signals, pedestrian safety systems, and controllers Low-voltage ITS, communications, and fiber systems Overhead traction power used by electric bus fleets Assist with utility coordination, conduit routing, duct bank layout, and pole/fixture placement Participate in QA/QC checks and site inspections Field Support Conduct site walks and support daily project reporting Ensure work complies with NEC, Caltrans, and City & County of SF standards Assist with safety documentation and equipment tracking Cost Control & Estimating Support cost tracking, production reporting, and invoice review Assist with takeoffs and estimating for new bids and upcoming scopes Requirements Bachelor's degree in Electrical Engineering is required 0-5 years of experience in construction, electrical infrastructure, utilities, or low-voltage systems Strong understanding of electrical fundamentals (voltage, current flow, grounding, circuits) Ability to read plans, technical specifications, and electrical diagrams Strong organizational and communication skills Proficiency with MS Office; experience with Bluebeam, AutoCAD, or Procore is a plus Valid driver's license and willingness to perform site visits Compensation & Benefits Base salary: $80,000 - $120,000 DOE Company vehicle + fuel card 401(k) Health & dental insurance Paid time off and company-paid holidays Strong long-term career progression into Assistant Project Manager and Project Manager roles

An innovative fleet management company in San Francisco seeks a motivated software developer to build the next generation of electric vehicle management software. You will collaborate with design and sales teams, working on web and backend features using Typescript, Go, and Python. Ideal candidates are passionate about electric vehicles, self-starters, and excellent team players. This role includes a competitive salary, health benefits, and a subsidy for EV purchases. #J-18808-Ljbffr

Job Responsibilities:The Project Engineer at FLINT supports the Project Manager and Project Superintendent to facilitate a well-managed project. The Project Engineer assists with the overall management and administration of projects including pre-construction services, estimating, subcontractor management, RFIs, submittal process, CORs, and SCOs. Responsibilities include:Drafting and reviewing subcontracts and purchase orders Thoroughly reviewing project documents and familiarizing with project participants Representing the company in project meetings Determining submittal requirements and maintaining the submittal log Assisting in developing and maintaining project schedules Conducting regular site visits to ensure proper construction and adherence to schedule Administering As-Built drawings Handling project correspondence and documentation Obtaining necessary permits and ensuring timely receipt of record documents Assisting in administering the Punch ListPerforming additional duties as assigned Job Requirements, Qualifications, Characteristics:FLINT is seeking an experienced Project Engineer with 1+ years of experience to perform project management functions on small projects (Good grasp of construction terminology and activities Understanding of all trades including MEP and building permit process Ability to estimate CORs, assist in bidding, and assemble project estimates Familiarity with cost control and management processes Basic understanding of prime contract types and delivery methods Proficiency in project documentation, scheduling, safety practices, and technology tools (Fieldview, Viewpoint, Team VPT1, Bluebeam, Pype, GCPay, P6, and Vista) Skills in business development and maintaining customer relations Understanding of fee enhancement, risk mitigation, and client management Ability to mentor team members and promote teamwork and cooperation

A leading global shipping company is looking for a competent Electrical Engineer with relevant seagoing experience. This key position involves supervising electrical maintenance and repair activities on advanced container vessels. Candidates must have at least 12 months of seatime in rank and experience with reefer containers. The company promotes diversity and is committed to creating an inclusive workplace. Interested applicants can contact via email for more information. #J-18808-Ljbffr

About Foundation: Foundation is developing the future of general purpose robotics and electric mobility with the goal to save lives and augment human labor. Our mission is to create an autonomous, crewless ATV built to be truly all‑terrain. Designed for commercial and defense use, it can save lives and take on heavy transport across mining, agriculture, construction, and more. We are on the lookout for extraordinary engineers and scientists to join our team. Your previous experience in robotics isn't a prerequisite - it's your talent and determination that truly count. We expect that many of our team members will bring diverse perspectives from various industries and fields. We are looking for individuals with a proven record of exceptional ability and a history of creating things that work. Our Culture: We like to be frank and honest about who we are, so that people can decide for themselves if this is a culture they resonate with. Please read more about our culture here ******************************* Who should join: You like working in person with a team in San Francisco. You deeply believe that this is the most important mission for humanity and needs to happen yesterday. You are highly technical - regardless of the role you are in. We are building technology; you need to understand technology well. You care about aesthetics and design inside out. If it's not the best product ever, it bothers you, and you need to “fix” it. You don't need someone to motivate you; you get things done. Why We Are Hiring for This Role: Own the end‑to‑end design of the vehicle electrical system, from power distribution to harness integration. Develop schematics, harness drawings, and PCB‑level designs for subsystem interconnects. Lead bench bring‑up of sensors, actuators, and compute subsystems prior to vehicle integration. Define and execute electrical validation tests (continuity, insulation, load testing, EMI checks). Work closely with Mechanical Engineering on packaging and routing of harnesses. Support system bring‑up during assembly, troubleshoot electrical issues, and drive root‑cause analysis. Collaborate with Embedded/Software to ensure clean power, comms, and integration for all subsystems. What Kind of Person We Are Looking For: Experience with sensors, actuators, and communication buses (CAN, Ethernet). 5-8+ years of experience in vehicle electrical systems, robotics, or related embedded hardware projects. Strong background in power distribution, harnessing, and PCB‑level design. Hands‑on experience debugging hardware in lab/bench settings. Familiarity with grounding, shielding, and safety practices for LV and HV systems. Comfortable working cross‑functionally and hands‑on in fast‑paced prototyping environments. BS/MS in Electrical Engineering or related field. We provide market standard benefits (health, vision, dental, 401k, etc.). Join us for the culture and the mission, not for the benefits. The annual compensation is expected to be between $180,000 - $1,000,000. Exact compensation may vary based on skills, experience, and location. #J-18808-Ljbffr

A leading LIDAR technology company in San Francisco is looking for a skilled Hardware Engineer. This role involves designing and optimizing electrical systems for advanced LIDAR applications. The ideal candidate has a BSEE with experience in hardware development, strong skills in circuit design, and proficiency with design tools. Offering a competitive salary range of $107,000-$200,000 and a collaborative work environment. #J-18808-Ljbffr

A leading IP recruiting firm in San Francisco is seeking an experienced patent attorney with expertise in patent preparation and prosecution in the electrical arts. Candidates should ideally have a BS degree in electrical engineering, excellent communication skills, and the ability to manage a large docket effectively. This role offers a unique opportunity to work with clients from various industries and advance your career in intellectual property. #J-18808-Ljbffr

Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. Applications are accepted until further notice. Please note this posting is to advertise potential job opportunities. This exact role may not be open today but could open in the near future. When you apply, a Cisco representative may contact you directly if a relevant position opens. *Meet the Team* Engineering: Open-minded, driven, diverse and deeply creative people at Cisco design the hardware that makes the internet work. Bring your knowledge of computers and networking and take it to a new level in any one of the following product categories including: cloud, social, mobile/wireless, video, VoIP, big data, collaboration, web, Internet of Things, routing, switching, IPv6, data center, HPC, Telepresence and many more. Your work will impact billions globally. Supply Chain Operations: Collaborate with peers on projects that have a real-world impact. From our processes to manufacturing, you'll deliver a standout customer experience of Cisco products and services. Take your creative ideas from the drawing board to deliver powerful solutions. You'll collaborate with multi-functional teams to determine our infrastructural needs and product specifications. *Your Impact* Join our Creative Hardware Engineering team and make a tangible impact across the full product development cycle-from foundational circuit design to large system integration-seeing your contributions realized in high-volume manufacturing. Shape the product lifecycle by managing multiple priorities and advancing both immediate and long-term hardware goals. Build and sustain strong relationships with cross-functional teams while collaborating on ASIC Design and Verification for reliable, high-performance products. Drive innovation in System/Board Design, leveraging excellent communication skills to align and deliver robust hardware solutions. Apply your collaborative spirit and technical expertise to optimize Circuit Board Layout for efficiency, manufacturability, and quality. Champion Hardware Automation initiatives, working across business groups to streamline development and testing processes. Lead Validation and Test activities by fostering positive team dynamics and ensuring product excellence. Enhance Signal Integrity, coordinating with extended teams to achieve optimal speed and data fidelity in complex systems. Advance Power Design strategies, contributing to energy-efficient and sustainable hardware solutions as a trusted team player. Minimum Qualifications Currently enrolled in an undergraduate degree program in Electrical Engineering, Computer Engineering, or a related field. Foundational understanding of hardware engineering principles, including experience with hardware design and tools (e.g., Altium, Cadence, Mentor Graphics) and simulation software. Familiarity with hardware testing and debugging techniques using lab equipment such as oscilloscopes, logic analyzers, and multimeters. Strong grasp of engineering fundamentals and technical problem-solving abilities. Able to commit to a 6-month co-op program. Able to legally live and work in the country for which you're applying, without visa support or sponsorship *Preferred Qualifications* Ability to lead multiple tasks, prioritize effectively, and work toward both short- and long-term goals. Experience building and maintaining positive working relationships within diverse and extended teams. Excellent written and verbal communication skills. Proven ability to work collaboratively across business groups and teams (hardware, software, manufacturing, etc.). Why Cisco? At Cisco, we're revolutionizing how data and infrastructure connect and protect organizations in the AI era - and beyond. We've been innovating fearlessly for 40 years to create solutions that power how humans and technology work together across the physical and digital worlds. These solutions provide customers with unparalleled security, visibility, and insights across the entire digital footprint. Fueled by the depth and breadth of our technology, we experiment and create meaningful solutions. Add to that our worldwide network of doers and experts, and you'll see that the opportunities to grow and build are limitless. We work as a team, collaborating with empathy to make really big things happen on a global scale. Because our solutions are everywhere, our impact is everywhere. We are Cisco, and our power starts with you. Message to applicants applying to work in the U.S. and/or Canada: Individual pay is determined by the candidate's hiring location, market conditions, job-related skillset, experience, qualifications, education, certifications, and/or training. The full salary range for certain locations is listed below. For locations not listed below, the recruiter can share more details about compensation for the role in your location during the hiring process. U.S. employees are offered benefits, subject to Cisco's plan eligibility rules, which include medical, dental and vision insurance, a 401(k) plan with a Cisco matching contribution, paid parental leave, short and long-term disability coverage, and basic life insurance. Please see the Cisco careers site to discover more benefits and perks. Employees may be eligible to receive grants of Cisco restricted stock units, which vest following continued employment with Cisco for defined periods of time. U.S. employees are eligible for paid time away as described below, subject to Cisco's policies: 10 paid holidays per full calendar year, plus 1 floating holiday for non-exempt employees 1 paid day off for employee's birthday, paid year-end holiday shutdown, and 4 paid days off for personal wellness determined by Cisco Non-exempt employees receive 16 days of paid vacation time per full calendar year, accrued at rate of 4.92 hours per pay period for full-time employees Exempt employees participate in Cisco's flexible vacation time off program, which has no defined limit on how much vacation time eligible employees may use (subject to availability and some business limitations) 80 hours of sick time off provided on hire date and each January 1st thereafter, and up to 80 hours of unused sick time carried forward from one calendar year to the next Additional paid time away may be requested to deal with critical or emergency issues for family members Optional 10 paid days per full calendar year to volunteer For non-sales roles, employees are also eligible to earn annual bonuses subject to Cisco's policies. Employees on sales plans earn performance-based incentive pay on top of their base salary, which is split between quota and non-quota components, subject to the applicable Cisco plan. For quota-based incentive pay, Cisco typically pays as follows: .75% of incentive target for each 1% of revenue attainment up to 50% of quota; 1.5% of incentive target for each 1% of attainment between 50% and 75%; 1% of incentive target for each 1% of attainment between 75% and 100%; and Once performance exceeds 100% attainment, incentive rates are at or above 1% for each 1% of attainment with no cap on incentive compensation. For non-quota-based sales performance elements such as strategic sales objectives, Cisco may pay 0% up to 125% of target. Cisco sales plans do not have a minimum threshold of performance for sales incentive compensation to be paid. The applicable full salary ranges for this position, by specific state, are listed below: New York City Metro Area: $44,000.00 - $185,000.00 Non-Metro New York state & Washington state: $44,000.00 - $185,000.00 For quota-based sales roles on Cisco's sales plan, the ranges provided in this posting include base pay and sales target incentive compensation combined. ** Employees in Illinois, whether exempt or non-exempt, will participate in a unique time off program to meet local requirements. Cisco is an Aff... (EOE statement continues) #J-18808-Ljbffr

FranklinWH is a rapidly expanding company determined to become the leader in the global energy home storage system (ESS) industry. FranklinWH offers whole home energy solutions typically coupled with solar PV systems, bringing households into the modern all-electric future. Though founded by experts in power electronics, BMS and EMS, FranklinWH is equally focused on energy management software while also providing top level service to our partners and customers. FranklinWH is expanding its global footprint, relying on an industry leading supply chain. This is an exciting time to be at a fast-growing company in a fast-accelerating industry. We are seeking a skilled Controls / Automation Engineer to support and optimize our manufacturing automation systems. This role involves PLC and HMI/SCADA programming, system commissioning, troubleshooting, and collaboration with cross-functional teams and vendors. The ideal candidate brings hands-on experience in industrial automation, strong problem‑solving skills, and the ability to support the rapid ramp‑up of our production lines. Responsibilities Resolve daily software issues and implement continuous system optimizations and upgrades to enhance production line performance and reduce dependence on the equipment manufacturer. Collaborate with the equipment vendor to ensure a thorough handover and knowledge transfer for seamless operations. Participate in equipment commissioning and familiarize with systems for the development of the second production line, supporting a smooth and rapid ramp‑up. Qualifications And Experience Bachelor's degree in Electrical, Control Systems, Mechatronics, or related engineering field. 5+ years of direct controls engineering experience in a manufacturing automation environment. Demonstrated expertise with Siemens PLCs (S7 series, TIA Portal, Safety Integrated). Experience configuring and debugging Cognex Vision Pro systems. Hands‑on experience with industrial communication protocols (Profinet, Profibus, EtherNet/IP, OPC UA). Motion control / servo drive / VFD experience and integration. Experience in KUKA/ABB robot operation and debugging. Strong knowledge of safety system logic, interlocks, electrical design, and best practices. Proven track record of commissioning, field debug, and production troubleshooting. Excellent documentation skills and ability to produce functional specifications, wiring diagrams, etc. Fluency in English and Chinese (both written and oral). Strong interpersonal skills to coordinate across engineering, operations, and supplier groups. Experience working with Chinese automation vendors. FranklinWH offers a competitive salary plus fully comprehensive benefits and a performance bonus package based on an annual objective achievement. This is a full-time position. Our generous benefits package includes: Benefits 401(k) Retirement Plan. Medical/dental/life/disability program. PTO, and sick days. Life insurance and long-term disability. FranklinWH is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status. #J-18808-Ljbffr

A leading AI-enabled manufacturing firm in San Francisco seeks an Automation Controls Engineer to design and develop automated solutions for robotic systems. This role involves programming PLCs, analyzing customer needs, and creating system requirements. Ideal candidates have a BS or MS in Electrical or Computer Engineering and experience with Beckhoff PLCs and Python. Join a team that values creativity and innovation in transforming manufacturing processes. #J-18808-Ljbffr

Job Title: Senior Electronics/Embedded Engineer Coherence Neuro is a fast‑growing, venture‑backed company pioneering implantable technologies that interface with the human body to address critical unmet medical needs. We're looking for driven individuals who are passionate about pushing the boundaries of engineering and science to solve some of the most complex biological challenges. In this early‑stage environment, we seek versatile team members with a hands‑on approach and a willingness to learn quickly and adapt. We value diversity and encourage applicants from all backgrounds to join us in our mission. Learn about our team here ! We are building our Product Development Team and looking for a Senior Electronics/Embedded Engineer to design and build the next generation of implantable neurotechnology, focusing on both the high‑performance electronics and the firmware that make neural interfaces and stimulation systems work. You will tackle complex hardware‑software challenges, innovate at the edge of neuroscience and medical devices, and help bring transformative technologies from lab to clinic. This is a highly hands‑on role where you will prototype, test, and refine hardware and firmware in a fast‑paced R&D environment Key Responsibilities Own critical elements of the design, development, and integration of mixed‑signal electronics and embedded firmware for implantable neurotechnology systems. Architect and implement low‑level firmware (C/C++/RTOS) including drivers, real‑time data acquisition, stimulation control, and communication stacks. Design and validate analog circuits, optical circuits, low‑noise amplifiers, power management modules, and digital interfaces. Own board bring‑up and hardware/firmware integration testing-debug complex interactions using oscilloscopes, logic analyzers, JTAG/SWD, and custom test rigs. Develop automated firmware/hardware test frameworks for benchtop, in‑vitro, and preclinical environments. Optimize electronics and firmware for low power, low noise, and high‑bandwidth data transfer with long‑term reliability. Collaborate closely with engineering teams on interface definitions and architectural decisions. Document firmware and electronics architecture, design decisions, interface specifications, and verification results under design control and QMS. Mentor junior engineers and help build a high‑performance embedded and electronics team. Required Qualifications and Skills Bachelor's or Master's in Electrical Engineering, Computer Engineering, Embedded Systems, or equivalent. 5+ years of experience developing mixed‑signal hardware and embedded firmware for complex devices. Expertise in C/C++, RTOS development (FreeRTOS/Zephyr/QNX), and hardware‑oriented programming. Bonus if familiarity extends to FPGA based embedded systems. Strong experience with low‑noise circuit design, ADCs/DACs, stimulation circuits, power management, and sensor integration. Strong MCU background, including peripheral configuration, DMA, interrupts, and real‑time constraints. Demonstrated ability to bring up new PCBs and debug cross‑disciplinary issues (electrical, firmware, timing, signal integrity). Experience with ECAD tools (Altium, Cadence) and a strong understanding of PCB design constraints. Familiarity with communication interfaces (SPI, I2C, UART, BLE, custom optical/RF). Familiarity with ISO 13485, IEC 60601, or other relevant standards. Strong documentation, safety‑first mindset, and ability to work within a regulated medical development environment. Strong communication skills and ability to work collaboratively in a interdisciplinary environment. Adaptability to fast‑paced research with dynamic priorities. Strong analytical and problem‑solving skills. Bonus Skills Experience with programming FPGA embedded systems (Verilog). Knowledge of optical communication, LED/photodiode drivers. Experience with inductive power transfer systems or high‑efficiency wireless power links. Experience working with or designing toward ASIC‑based implementations. Reporting Structure This role is an integral part of the product team and reports directly to the VP of Engineering. Benefits US standard compensation: competitive salary and share options. Daily meals provided. Healthcare and 401k. Professional development support and training opportunities. Flexible working hours and travel opportunities (sites in Australia, UK, and US). A chance to work on impactful, life‑changing technologies in a dynamic, innovative environment. If you are passionate about innovation in healthcare, we would love to hear from you! Please submit your application here. #J-18808-Ljbffr

A leading robotics firm is seeking a Hardware Engineer in San Francisco, CA to design and deploy the core hardware systems for autonomous construction vehicles. In this hands-on role, you will develop teleoperation systems, integrate sensors like LiDAR, and ensure mechanical reliability. Ideal candidates will have 2-10 years of hardware engineering experience, a background in robotics or heavy machinery, and a passion for building from the ground up. Willingness to travel up to 50% is necessary. #J-18808-Ljbffr

Echo Neurotechnologies is an exciting new startup in the Brain-Computer Interface (BCI) space, driving innovation through advanced hardware engineering and AI solutions. Our mission is to deliver cutting‑edge technologies that restore autonomy to people living with disabilities and improve their quality of life. Team Culture Join a small, dedicated team of knowledgeable and motivated professionals. Our early‑stage environment offers the opportunity to take ownership of broad decisions with significant and long‑lasting impact. We emphasize continuous learning and growth, fostering cross‑functional collaboration where your contributions are vital to our success. Position Overview As the Lead Electrical Test Engineer, you will be responsible for planning, coordinating, and executing system‑level electronics testing that demonstrates Echo's BCI devices are safe, effective, and compliant with FDA and international standards. You will lead electrical testing across Pre‑V&V, V&V, and production, ensuring requirements are testable, designing rigorous test protocols, and delivering FDA‑ready evidence for design controls. In addition to verification and validation, you will establish and maintain production test strategies to ensure reliable device manufacturing. With your expertise in electronic systems and test engineering, you will bridge development and operations to ensure Echo's implantable and wearable systems meet the highest safety, quality, and manufacturability standards. Key Responsibilities Define and lead system‑level test strategies across electrical subsystems, integrated device, and system validation. Translate system and design requirements into test protocols with clear, measurable acceptance criteria. Lead Pre‑V&V electronics efforts: bench bring‑up, early feasibility testing, and design‑for‑testability. Direct system‑level verification and validation testing (bench, hardware‑in‑loop, simulated clinical use, IEC 60601 electrical safety). Develop and maintain production test systems: design test fixtures, sockets, automation scripts, and scalable processes for manufacturing. Collaborate with Electrical, Firmware, Systems, QA, and Regulatory teams to ensure compliance with FDA 21 CFR Part 820, ISO 14971 (risk management), and related standards. Liase with System DVT lead, internal teams, and consultants. Generate Verification and Validation Reports, production test documentation, and FDA submission‑ready documentation. Lead failure investigations at system and production level, ensuring root cause analysis and corrective actions are documented and retested. Provide test engineering leadership in support of design transfer to manufacturing and ongoing production quality. Qualifications Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Biomedical Engineering, or related field. 7+ years of experience in electronics/system testing, verification, and validation for medical devices. Proven experience leading component‑level, subsystem, and system‑level test campaigns for Class II or III medical devices (implantable preferred). Experience in designing and scaling production test systems for medical electronics. Strong knowledge of standards and regulations: 21 CFR Part 820 (Design Controls) IEC 60601 (Electrical Safety & EMC) ISO 14971 (Risk Management) IEC 62366 (Usability Engineering) Familiarity with hardware‑in‑loop and system integration test methods. Experience collaborating across disciplines (EE, FW, ME, QA, RA, Manufacturing, external labs). Skills and Abilities Expertise in electronic system test methods: signal integrity, power analysis, EMI/EMC, environmental stress, and safety compliance. Ability to design, implement, and oversee system‑level verification and validation test plans. Proven experience developing and maintaining production test setups, fixtures, and automation for medical device manufacturing. Proficiency with lab equipment: oscilloscopes, spectrum analyzers, DMMs, logic analyzers, power analyzers. Skilled in writing clear, defensible test protocols and reports for regulatory and manufacturing use. Strong organizational discipline in traceability, version control, and change management. Ability to lead cross‑functional test campaigns and manage external test labs/CROs. Excellent communication skills, able to translate test results for engineers, QA/RA, and regulatory reviewers. What We Offer An opportunity to work on exciting, cutting‑edge projects to transform patients' lives in a highly collaborative work environment. Competitive compensation, including stock options. Comprehensive benefits package. 401(k) program with matching contributions. Equal Opportunity Employer Echo Neurotechnologies is an Equal Opportunity Employer (EOE). We celebrate diversity and are committed to creating an inclusive environment for all employees. Confidentiality All applications will be treated confidentially. Applicants may be asked to sign an NDA after the initial stages of the interview process. #J-18808-Ljbffr

A technology company in San Francisco is looking for an experienced Electrical Engineer to contribute to the design and development of wearable electronics. The ideal candidate should have over 10 years of experience in complex electrical engineering projects, possess strong skills in both analog and digital domains, and enjoy working collaboratively across teams. This full-time position offers competitive benefits, including health, dental, and 401k matching, making it a great opportunity for passionate professionals. #J-18808-Ljbffr

Company: Based in San Francisco a premier construction company specializing in grading& paving with 40 years in business. Known for their quality craftsmanship and commitment to sustainability, they provide a wide range of services including road construction, asphalt repair, sealcoating, and site development. We have earned a solid reputation for timely project completion, attention to detail, and exceptional customer service. Their expertise serves both public and private sector clients, making them a trusted contractor in the Bay Area, We are currently seeking a Project Engineer to join our dynamic Team in our new San Francisco office - supporting Paving, Grading, & Civil construction projects. Job Description: Support construction activities by planning, organizing, and implementing project engineering & project controls tasks as required for successful project execution. Processing Submittals, Change Orders, and RFI's Safe work planning and execution. Project Layouts USA Layout (calling and updates) Quality control supervision. Quantity tracking Budget management Scheduling 3 weeks, 9 day look ahead, weekly schedule update (every Monday) and monthly Project Schedule Baseline Update. Contract / subcontract administration. Change coordination (COR). Document control (tags, invoices, and material). Project closeout. Provide supervision on-the-job for activities performance. Develop complete understanding of contract plans and specifications. Assist the project team in implementing overall Quality Management system. Inspect field conditions and identify problems, inaccuracies, and cost saving measures that arise or that may be encountered. Take corrective actions as needed. Inspect subordinates' work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed. Ensure compliance with all regulatory requirements for executing projects. Tracking material costs and quantities entering project sites. Create reports based on monthly material costs and inventory. Perform material takeoffs from drawings, specifications, and other contract documents. Perform basic engineering calculations and technical drafting to support field operations. Interpretation of drawings and specifications for field crews and craft supervision. Perform quantity calculations by taking measurements and determining percentage of completed/installed materials and work (billing process). Perform the preparation of work plans and work packages. Field surveying and work layout support including elevation, control points, and compilation of as-built data. USA layout/call in remarks. Layout pothole activities and performing the report. Assist in compiling, processing, and confirming daily labor timesheets. Participate in jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training. Assist on Order and schedule material deliveries. Regular, reliable attendance. Work productively and meet deadlines timely. Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. May need to work additional hours during the week and weekend to complete job responsibilities within deadlines. May work at various locations and conditions may vary. Evaluate, prepare, and distribute appropriate RFI's and COR's. Maintain accurate logs/records of the activities associated with RFI/Submittal/COR processes and ensure that critical pending items are brought to the forefront. Support on multiple projects Qualifications: BS Degree in Construction Management, Engineering, or related field - may substitute degree for field experience Minimum of (1) years' experience in construction or engineering with an emphasis on Civil Projects Experience with Concrete, Paving, or Civil Construction a plus Working knowledge and ability to direct the operation of at least the following management systems: accounts payable/accounts receivable, materials control, estimating, job cost updates and subcontracts Proven abilities and skills in the following: leadership and management of people, communication (verbal and written), planning, organization, delegation as well as teaching and mentoring Ability to set standards of excellence in leadership, safety, quality and productivity for his/her subordinates Ability to access all areas of the construction site Previous experience / knowledge of City & County Municipal requirements and specifications a plus. Excellent people skills & works well with others - team player! Self-starter & educator Ability to lift 30 lbs. Possesses excellent organizational/coordination skills Computer Skills must include: Microsoft Office (Excel/Word/Access)

Seeking a top-tier Project Engineer for high-end residential construction. Are you looking for a challenge and opportunity to grow? Are you interested in working on architecturally-driven, high-end residential projects throughout Northern California? FORMA Construction, an award-winning firm, seeks a motivated, detail-oriented Project Engineer to help our clients build their dream homes. The Project Engineer role is a critical hub for FORMA. In coordination with the Project Manager and the Superintendent; the PE works closely with clients, architects, designers, subcontractors, and other vendors. The PE tracks progress and updates budgets while keeping the project well-documented and running smoothly ensuring that our clients are informed and consulted every step of the way. Success in this role is measured by your ability to maintain project documents like RFI's and Submittals among other tasks within Procore while maintaining good relations with our clients, vendors, and other stakeholders. At FORMA, our Mission is the continual development of our people and processes to create lasting relationships built on integrity, partnership, and craft. Our core values are based on Urgency, Ownership, Communication and Craft. FORMA's clients and work sites take us throughout the greater Bay Area, building a range of styles and requirements, but all our projects share the same level of dedication, detail, and communication. Our Project Engineer will ensure that our clients receive the best possible service, while continuing to build their experience in project management. Responsibilities: Assist with document control including RFI's, submittals, subcontractor bids and documentation, change orders, schedule updates, drawings, and meeting minutes. Ensure projects and subcontractors are properly set up in Sage and Procore. Coordinate with Superintendent to ensure daily logs, photo documentation, and required postings are correct and up to date. Interface with City and County government in relation to permits, parking, and inspections. Coordinate on site project set up, ensuring basic office supplies, safety equipment, required postings, toilets and utilities are in place for the project. Schedule, set agendas, produce documentation and logs, and take notes for project meetings. Manage and update punch list for project. Assemble close out package for clients at the end of the project, including Maintenance and Service information and schedule. Participate in weekly Maintenance and Service meeting, schedule all maintenance, and distribute service schedule to the service team. Regularly interface with clients, answering questions, keeping them up to date on their projects, and contacting them about needed maintenance and service on their completed projects. Requirements: Construction project management experience preferred Degree in a related field. Valid driver's license and reliable transportation. Ability to speak, read, and write in English. Ability to multitask and handle multiple high priority tasks. Strong written and verbal communication skills. Excellent customer service. Strong computer skills, experience with Microsoft suite, Smartsheet, and Procore. Team-oriented and willing to work with others to achieve results. Ability to work independently. Compensation This is a full-time, exempt role with a salary range of $65-85k annually. FORMA's current benefits package includes: Health, dental, and vision insurance with employer contribution. FSA and commuter benefits accounts. Employer-provided life insurance. 401k with employer matching. Potential annual bonus based on twice yearly employee review cycle. Unlimited PTO policy. Separate paid sick leave of 72 hours per year. FORMA provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Project Engineer - Motivated/Hungry/Driven - Commercial Construction Company: Armer/Norman & Associates - A growing General Contractor specializing in commercial projects Job Type: Full-Time Salary Range: $70,000 - $115,000 DOE (plus benefits, bonus potential, and professional development opportunities) About Us Armer/Norman is a dynamic general contractor based in the Bay Area, delivering high-quality commercial construction projects on time and within budget. We're expanding our team and seeking a motivated Project Engineer to support our project management efforts in a fast-paced environment. We're considered a growing but small/medium size GC operating in niche industries. Your employment will have a direct impact on the project and company's success and growth - you will not be lost in the numbers as you would with a bigger GC. Your growth rate and potential within the company will be a direct function of your productivity, not your tenure. We want motivated, hungry, and driven applicants only. Job Summary We are looking for a Project Engineer with 2-5 years of hands-on experience working for a general contractor. The ideal candidate will assist Project Managers and Superintendents in coordinating all aspects of commercial construction projects, from submittals and RFIs to closeout. Proficiency in Procore is essential, as it's our primary project management software. Key Responsibilities Assist in managing project documentation, including submittals, RFIs, change orders, and closeout packages using Procore. Coordinate with subcontractors, architects, engineers, and owners to ensure smooth project execution. Track project schedules, budgets, and progress; prepare reports and updates. Support quality control, safety compliance, and on-site coordination. Review plans, specifications, and contracts for accuracy and compliance. Handle procurement, material tracking, and logistics. Participate in project meetings and contribute to problem-solving. Qualifications Bachelor's degree in Construction Management, Civil Engineering, or a related field. 2-5 years of experience as a Project Engineer or similar role with a general contractor (commercial projects preferred). Proven hands-on experience with Procore software (e.g., managing drawings, submittals, RFIs, daily logs, and financials). Strong understanding of construction processes, building codes, and safety standards. Proficiency in Microsoft Office Suite; experience with Bluebeam, MS Project, or similar tools is a plus. Excellent communication, organizational, and problem-solving skills. Ability to thrive in a team environment and manage multiple priorities. What We Offer Competitive salary based on experience. Comprehensive benefits package (health, dental, vision, 401(k) with match). Opportunities for professional growth and Procore certification support. Paid time off, holidays, and performance bonuses. A supportive team culture in the vibrant Bay Area construction market. Control your future and fast-track your career in construction with us by applying today!

Founding Hardware Engineer (Stealth Robotics Startup) On-Site • San Francisco, CA About Us We're a tiny, fast-moving team building autonomous systems for heavy industrial machines. We retrofit existing equipment with a plug-and-play autonomy kit that taps directly into machine controls and layers on a full perception + connectivity stack: multi-sensor vision, LiDAR, high-precision GNSS, IMU, and a low-latency tele-operation network. In just a few months, we've gone from first prototype to real machines operating on active job sites, with early recurring revenue and a growing pipeline of paid pilots. We're backed by top-tier early-stage investors along with a group of founder-operators who know what it takes to build in the real world. Our founding team has built and shipped hardware, software, and robotics systems before. We thrive where physical machinery, harsh environments, and rapid iteration collide. Why Join Us You want to work on problems that actually matter - fixing how the world builds things. Construction is the backbone of civilization, and it's currently broken. We're here to change that. You don't want a cushy robotics lab job. You want to build robots in the mud, on real sites, under real constraints. You'd rather spend a week living out of a dusty RV next to a machine you're debugging than polishing a slide deck. You want to see your designs move 20-50 tons of real hardware. You want to feel the stakes. You want teammates who operate at founder-level intensity and ownership. About You You're a hacker at heart - the kind of person who gets a prototype working before most people finish their planning doc. You've built something from scratch: a company, a product, a robot, a system - success not required, agency absolutely required. You work extremely hard, laugh often, and don't mind chaos. You prefer “figure it out now” to “wait for perfect requirements.” What You'll Own As a founding Hardware / Mechatronics Engineer, you'll design and build the core systems that enable remote operation, sensing, and autonomy assistance on industrial machines. You'll work across mechanical, electrical, and embedded disciplines, often all in the same day. System Design & Prototyping Architect and build tele-operation hardware systems, including power, compute, and control modules for machine retrofits. Sensor Integration Integrate and calibrate cameras, LiDAR, radar, GNSS, IMUs, and other sensors using interfaces like GMSL, CAN, and Ethernet. Electrical & Mechanical Integration Design robust wiring harnesses, brackets, mounts, and enclosures that survive real-world abuse. Communication Interfaces Implement and validate CAN, LIN, J1939, Serial, and Ethernet connections with both existing ECUs and custom control hardware. Manufacturing & DFM Work with vendors to bring designs from scrappy prototypes to reliable production, including DFM, testing, and validation. Testing & Validation Lead machine bring-up, HIL testing, and on-site debugging alongside software and autonomy engineers. Documentation & Design Produce schematics, harness drawings, CAD models, assembly docs, and anything else needed to build and scale the hardware. Compensation & Support Base: ~$200-300k Equity: ~1-3% Full health/dental/vision, relocation + visa support, downtown SF workspace with full electronics/mech prototyping tools, 401(k), high-spec laptop, and budget for any gear you need.

An innovative neurotechnology company in San Francisco seeks a Senior Electronics/Embedded Engineer. This role involves designing and building implantable neurotechnology, focusing on mixed-signal electronics and embedded firmware development. Candidates should have over 5 years of experience, expertise in C/C++ and RTOS, and strong skills in low-noise circuit design. The position offers a dynamic environment with opportunities for professional development and contributions to life-changing technologies. #J-18808-Ljbffr