Electrical engineer jobs in Upper Southampton, PA - 495 jobs

A Multinational Engineering Consultancy has opened a strategic role in their Philadelphia MEP engineering team: Senior Electrical Design Engineer. This role involves collaborating with engineering team members to develop design solutions that balance context, budget, and aesthetics for building projects. Key Responsibilities: • Design building components while integrating architectural requirements and adhering to codes • Evaluate design requirements and create construction drawings • Perform calculations, code research, material and systems analysis • Conduct site surveys and field reviews to document existing and new construction • Write engineering specifications for project manuals • Review project products and shop drawings for quality and code compliance Required Skills & Qualifications: • Proficiency with AutoCAD, Revit MEP, and electrical design software • Strong knowledge of building electrical systems across multiple building types • Familiarity with architectural design concepts and building codes • Post-secondary education in Electrical Engineering • Registration with a relevant professional engineering association (PE License preferred) This is a fantastic opportunity to contribute to high-profile projects and be part of a leading MEP consultancy.

Job Title: Controls Engineer - PLC Programming & HMI Development Salary: Up to $110,000 + Benefits We are looking for a skilled and motivated Controls Engineer to join our team in Philadelphia. This role requires expertise in PLC programming, HMI development, and industrial automation systems, with hands-on experience using platforms like Rockwell RSLogix and Siemens TIA Portal. The ideal candidate will be responsible for designing, programming, troubleshooting, and maintaining control systems for manufacturing and industrial processes. As a Controls Engineer, you will work directly with a cross-functional team to ensure that all automation systems operate efficiently, safely, and in compliance with all industry standards. This is a full-time, onsite position that offers competitive compensation and benefits. Key Responsibilities: PLC Programming & Troubleshooting: Design, develop, and implement PLC programs for control systems using Rockwell RSLogix and Siemens TIA Portal. Troubleshoot and optimize existing PLC programs to improve system performance, reliability, and efficiency. Ensure that all control systems meet safety, functionality, and regulatory requirements. HMI Development & Configuration: Develop and configure Human-Machine Interfaces (HMIs) for operator interaction with control systems. Design user-friendly interfaces using software platforms like FactoryTalk, WinCC, and others to provide real-time data to operators. Control System Design: Participate in the design and implementation of control systems for new and existing manufacturing equipment. Develop control strategies and select appropriate hardware (PLC, HMI, sensors, etc.) for automation processes. System Maintenance & Upgrades: Perform routine maintenance, updates, and modifications to control systems to keep them up-to-date with technology and process improvements. Support troubleshooting of control system issues and resolve problems in a timely manner to minimize downtime. Collaboration & Documentation: Work closely with engineers, operations, and maintenance teams to integrate automation systems into production workflows. Document all control system designs, modifications, and troubleshooting procedures for compliance and future reference. Prepare and maintain system specifications, manuals, and technical reports. Project Support: Assist with project planning, scheduling, and cost estimation for automation-related projects. Lead or support the commissioning and testing of new control systems in a real-world production environment. Requirements: Experience: 3+ years of experience in PLC programming and HMI development in an industrial or manufacturing environment. Extensive experience with Rockwell RSLogix (Allen-Bradley) and Siemens TIA Portal. Experience with various types of industrial automation, including motor control, sensors, actuators, and networking protocols (Ethernet/IP, Modbus, etc.). Experience with SCADA and HMI software (e.g., FactoryTalk, WinCC, Wonderware) is preferred. Technical Skills: Strong proficiency in PLC programming, debugging, and troubleshooting. Knowledge of industrial communication protocols such as Ethernet/IP, Modbus TCP, Profibus, etc. Familiarity with control system hardware such as I/O modules, safety relays, drives, and motors. Understanding of electrical diagrams, schematics, and PLC/HMI programming standards. Problem-Solving & Analytical Skills: Ability to troubleshoot and resolve issues related to automation and control systems. Strong attention to detail and analytical thinking to optimize system performance. Education: Bachelor's degree in Electrical Engineering, Controls Engineering, or related field is preferred. Relevant certifications in PLC programming, automation, or controls engineering a plus (e.g., Rockwell Certified, Siemens Certified).

Principal Traffic Engineer - Transportation Systems & Road Safety Salary Range: $Up to $121,415.39 Schedule: Full-Time & Part-Time (Flexible hybrid schedule available) A public-sector engineering department is seeking a full-time or part-time Principal Traffic Engineer to lead complex traffic engineering and roadway safety initiatives that impact daily travel across the region. This senior-level transportation engineering role is responsible for planning, designing, and implementing traffic control systems that enhance public safety, mobility, and roadway infrastructure. The Principal Traffic Engineer will apply traffic studies, roadway design principles, and safety analysis to develop data-driven transportation solutions. This role offers a flexible hybrid work schedule and the opportunity to contribute to projects that meaningfully improve community quality of life. Key Responsibilities: Conduct and manage traffic engineering studies, including data collection, traffic flow evaluation, and pattern analysis Design and implement traffic control systems such as traffic signals, signage, and pavement markings Develop and recommend roadway safety improvements to enhance mobility and reduce traffic incidents Collaborate with municipal, regional, and state agencies to address transportation and traffic-related challenges Lead field investigations, oversee project implementation, and evaluate the effectiveness of traffic systems and safety measures Knowledge, Skills, and Abilities Strong knowledge of transportation engineering principles, roadway design, and traffic operations Proficiency in traffic modeling tools, transportation data analysis, and engineering software Demonstrated leadership, project management, and decision-making capabilities Excellent written and verbal communication skills, with the ability to present technical findings clearly Commitment to public service and improving community safety through effective transportation solutions Minimum Requirements: Bachelor's degree in Engineering from an accredited college or university A valid Professional Engineer (PE) license may substitute for the degree requirement Valid New Jersey Driver's License Minimum of three (3) years of professional experience in traffic engineering, including traffic design, transportation analysis, and roadway systems A master's degree in Engineering may substitute for one (1) year of required experience Benefits: This position offers a competitive and comprehensive benefits package designed to support employee well-being and professional growth, which may include: Health and wellness coverage Retirement and deferred compensation plans Generous paid time off and leave benefits Training, tuition assistance, and continuing education opportunities

Staff Engineer - Outside Plant Employment Type: Full-Time About Us: CARIAN is a leading, women-owned consulting and advisory firm dedicated exclusively to the power, renewables, and utilities sectors. We specialize in program management and business intelligence services, partnering with Fortune 500 utilities to navigate complex challenges and deliver transformative results. We are seeking a Staff Engineer - Outside Plant Construction to support critical utility projects across New Jersey. This position provides both engineering and construction support for outside plant utility projects such as Overhead Transmission and Distribution project, working directly in client field offices and ensuring seamless coordination between engineering requirements and construction execution. You will play a critical role in ensuring projects are completed safely, on time, and within scope. Position Summary The Staff Engineer will be responsible for providing technical expertise and construction oversight for outside plant utility projects, including engineering support, field inspections, and ensuring compliance with project specifications and industry standards. Responsibilities Provide on-site engineering and construction support for outside plant (e.g. overhead transmission and distribution) utility projects. Assist with troubleshooting and resolving technical issues related to both engineering and construction. Monitor construction progress and address field issues to ensure compliance with project requirements, safety, and quality standards. Ensure compliance with utility regulations, safety standards, and permitting requirements. Collaborate with project managers, contractors, and stakeholders to coordinate technical aspects and address field challenges. Develop and maintain accurate project documentation and status reports. Utilize Power BI or similar tools to track and report on key performance metrics. Travel to various project sites as needed. Qualifications Bachelor's degree in Engineering, Construction Management, Science, Business, or a related field. Valid driver's license and reliable vehicle for travel to project sites. Strong knowledge of construction methods, materials, and utility standards. Ability to work independently and in the field under varying site conditions. Excellent communication, problem-solving, and project coordination skills. Proficiency in Microsoft Office Suite and construction management tools. What We Offer Competitive compensation and benefits package Opportunities for professional growth and advancement A dynamic and collaborative work environment CARIAN takes pride in being an Equal Opportunity Employer. We do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, citizenship, gender expression or identity, status as a veteran, and basis of disability or any other federal, state, or local legally protected class. As a Woman-Owned Business Enterprise, CARIAN is committed to providing employment opportunities to women, veterans, and underrepresented minorities. Compensation The base salary range for this role is $85,000 - $110,000 annually. This range represents a good-faith estimate at the time of posting; actual compensation will depend on experience, qualifications, and other factors permitted by law. In addition to base salary, the role includes eligibility for bonus incentives, a comprehensive benefits package, and a company 401(k) match. Employment is contingent upon the candidate having and maintaining valid authorization to work in the United States. The Company does not sponsor, and will not sponsor, employment-based visas or provide immigration support for this position.

Project Engineer / Project Manager (Capital Projects) We are seeking an experienced Project Engineer / Project Manager to support capital projects at an industrial manufacturing facility in Fieldsboro, NJ. This role is responsible for planning, executing, and delivering projects from initiation through completion while ensuring safety, schedule, and budget objectives are met. The ideal candidate has hands-on experience managing capital projects in a manufacturing or industrial environment and is comfortable coordinating across multiple stakeholder groups. Key Responsibilities Plan, manage, and execute capital projects from concept through completion Develop and maintain project schedules, budgets, and execution plans Coordinate with internal teams, contractors, and vendors to ensure project requirements are met Monitor project progress, identify risks, and resolve issues impacting scope, schedule, or cost Ensure compliance with site safety standards and applicable regulatory requirements Track project performance and provide regular updates to leadership Support commissioning and project closeout activities as required Required Qualifications Bachelor's degree in Engineering or a related technical field Minimum 5 years of experience in project engineering and/or project management Proven experience supporting capital projects in a manufacturing or industrial environment Strong communication, organization, and leadership skills Ability to manage multiple projects simultaneously in a fast-paced setting Strong attention to detail and ability to work cross-functionally Preferred Experience Experience working in industrial manufacturing or process-driven facilities Familiarity with contractor coordination and capital project execution

BANC3 is seeking an electrical / computer engineer to work in a dynamic, small team environment in support of design, development and production of electrical systems and boards for us in RF systems and digital receiver projects. Responsibilities include working with vendors to layout and manufacture boards, ensuring that the boards meet designed specifications. Excellent communications skills are needed to maximize performance in the small team setting. Candidate should be able to work independently and interact effectively with other team members involved in complementary technical disciplines (mechanical engineering, RF engineering, software engineering). Required Skills & Qualifications: * Bachelor's degree in Electrical or Computer Engineering * Minimum of 10 years of FPGA design experience * Knowledge of FPGA design implementation with VHDL design language * Knowledge of embedded processors, and SOC development for FPGA devices * Thorough understanding of VHDL, the FPGA design process and the tools used to generate the FPGA designs (VHDL, Synthesis, Place and Route, Simulation, Timing Analysis and Timing closure) * Ability to estimate FPGA resource requirements * Experience with interfaces, communication protocols and bus standards such as: USB, AXI, I2C, SPI, UART, RS-232, GigE * Experience with FPGA simulation (Modelsim / Questa) to verify performance, then integrate and test the FPGA on the circuit card assembly * Familiar with embedded logic analyzer (Signaltap / ChipScope) * Experience designing with memory map and register-read/write across interfaces * Able to take Matlab simulations and implement the design to run in the FPGA. * Familiar with version control software such as GIT or SVN. * Experience with High Performance FPGAs from Intel (Stratix 10 / Agilex) or Xilinx (Virtex) Preferred Skills and Qualifications: * Master's Degree in Electrical or Computer Engineering * 15+ years of experience designing hardware from concept through production. * Analog and digital circuit design up to 5 GHz * Experience in design electronic in extreme environments (MIL-STD-461) * Experience with OpenVPX design * Experience routing PCB designs * Knowledge of FPGA design implementation with VHDL design language * Knowledge of embedded processors, and SOC development for FPGA devices * Experience with FPGA simulation (Modelsim / Questa) to verify performance, then integrate and test the FPGA on the circuit card assembly Tools * Orcad Capture (CIS/CIP) * Orcad Sigrity * GIT Tools: * Orcad Capture (CIS/CIP) * Orcad Sigrity * GIT Location: Hybrid - Remote and on site in Princeton, NJ. Job Type: Full-time

Job DescriptionDescription: Three years of professional experience in electrical and electronics engineering design, development, and testing, including two years of experience with electrical power generation, distribution, conversion, and transmission. Requirements: Bachelor's degree in Electrical/Electronics Engineering from an accredited college or university.

Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity's Built Environment division, combining its deep expertise in high-performance building systems with Trinity's strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B's capabilities and offers employees: Access to a broader portfolio of international projects and clients Enhanced career mobility across Trinity's global network Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role We are seeking a dynamic and experienced Associate to join our Electrical department in our Philadelphia office. This leadership role offers the opportunity to manage a variety of projects from concept through completion while contributing to the strategic growth of the firm. As an Associate, you'll lead project teams, mentor junior staff, and collaborate with firm leadership to deliver high-quality engineering solutions and drive business development. Key Responsibilities Lead conceptual design efforts, including system criteria, equipment room sizing, and building stack development Guide project teams through construction documentation and project completion Manage review of shop drawings, RFIs, contractor change orders, and conduct site visits and punch lists Establish and manage project schedules, ensuring efficient resource use and timely task completion Prepare proposals and additional services; coordinate reviews and approvals with Partners Coach and mentor staff, provide performance feedback, and support professional development goals Minimum Qualifications Bachelor's degree in electrical or mechanical Engineering 10-14 years of electrical engineering experience Proficient in design calculations and software tools such as Revit and AutoCAD Strong project management and leadership skills Deep understanding of trade-specific scopes, codes, and coordination with other disciplines Knowledge of documentation requirements for all project phases (SD, DD, CD, specifications) Why Work at JB&B? Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies. Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning. Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors. Multiple office locations: New York, Boston and Philadelphia. What We Offer Hybrid workplace offering the flexibility to work both from home and the office Comprehensive benefits package including 401k employer match and stock options Paid time off (PTO), volunteer program and employee resource groups Training and professional development courses through JB&B University Estimated compensation range: $122,000-140,000 base salary per year Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law.

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at ******************* Job Function: Supply Chain Engineering Job Sub Function: Manufacturing Engineering Job Category: Scientific/Technology All Job Posting Locations: Danvers, Massachusetts, United States of America Job Description: About Cardiovascular Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding the possibilities of Cardiovascular? Ready to join a team that's reimagining how we heal? Our Cardiovascular team develops leading solutions for heart recovery, electrophysiology, and stroke. You will join a proud heritage of continually elevating standards of care for stroke, heart failure and atrial fibrillation (AFib) patients. Your unique talents will help patients on their journey to wellness. Learn more at *******************/medtech We are searching for the best talent for Sr. Electronics Production Engineer Purpose: This role will drive the scale-up and production of a complex electro-mechanical medical device used in life-saving cardiac support therapies. This role will own scale-up activities, validations, root-cause investigations, safety and regulatory compliance, and continuous process improvement with a focus on cost savings and robust, repeatable manufacturing processes. You will be responsible for: Scale-Up & Design Transfer Lead scale-up from pilot to full-scale production, including process development, equipment qualification, line layout, and work instructions. Collaborate with R&D and Quality to ensure smooth design transfers and robust manufacturing readiness. Validation & Verification Plan and execute IQ/OQ/PQ activities for equipment, processes, and software where applicable. Develop and approve validation protocols and reports; ensure traceability to user needs and regulatory requirements. Root Cause Investigation & CAPA Lead root-cause analysis for yield loss, quality escapes, and process deviations using structured problem-solving methods. Implement corrective and preventive actions (CAPA), verify effectiveness, and close with data-driven evidence. Safety & Regulatory Compliance Ensure manufacturing activities comply with EHS standards and device safety requirements. Maintain alignment with regulatory expectations (e.g., FDA QSR/21 CFR Part 820, ISO 13485) and support regulatory submissions as needed. Process Improvement & Cost Savings Identify and execute Lean/Six Sigma projects to improve throughput, reduce cycle times, increase yield, and lower cost per unit. Apply statistical methods (DOE, SPC, MSA, Cp/Cpk analysis) to optimize processes and sustain gains. Quality Systems & Documentation Maintain and improve documentation: SOPs, work instructions, MBR/Device History Records, change controls, and validation artifacts. Develop and manage PFMEA, Control Plans, and ongoing quality checks to ensure product reliability. Production Support Provide hands-on troubleshooting on the manufacturing floor; drive standard work, line balancing, and equipment optimization. Monitor key production metrics and implement actions to meet targets for quality, cost, and schedule. Cross-Functional Collaboration Partner with Quality, Regulatory, Supply Chain, Manufacturing, and R&D to align on program milestones, risk, and resource needs. Mentor and coach junior engineers and technicians; contribute to a culture of continuous improvement. Qualifications / Requirements: Bachelor's degree in Engineering (Electrical, Mechanical, Biomedical, Industrial, or related). Master's degree strongly preferred. 6-10+ years of manufacturing engineering experience in electronics or medical devices (device hardware, electronics assembly, or related fields). Working knowledge of FDA QSR/21 CFR Part 820 and ISO 13485. Experience supporting or leading design transfers, validation activities, and quality systems in a regulated environment. Proficient in DOE/DOE-based experiments, statistical process control (SPC), capability analyses (Cp/Cpk), MSA, and root-cause analysis methodologies. Experience with process validation (IQ/OQ/PQ) and risk-based approaches to manufacturing. Familiarity with PCB/SMT assembly, soldering, testing, electronics packaging, and related manufacturing processes. Experience with change control, CAPA, PFMEA, control plans, and documentation management. Excellent problem-solving, communication, and project-management skills. Ability to work cross-functionally, influence without authority, and manage multiple priorities in a fast-paced environment. Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson & Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, external applicants please contact us via *******************/contact-us/careers , internal employees contact AskGS to be directed to your accommodation resource. #LIOnsite Required Skills: Preferred Skills: Accelerating, Coaching, Critical Thinking, Facility Management, Good Manufacturing Practices (GMP), Lean Manufacturing Principles, Lean Supply Chain Management, Manufacturing Engineering, Performance Measurement, Product Design, Program Management, Project Engineering, Project Schedule, Risk Compliance, Robotic Automation, Safety-Oriented, Science, Technology, Engineering, and Math (STEM) Application, Technologically Savvy The anticipated base pay range for this position is : $94,000.00 - $151,800.00 Additional Description for Pay Transparency: $91,000 - $147,200 This position is eligible to participate in the Company's long-term incentive program. Subject to the terms of their respective policies and date of hire, employees are eligible for the following time off benefits: Vacation -120 hours per calendar year Sick time - 40 hours per calendar year; for employees who reside in the State of Colorado -48 hours per calendar year; for employees who reside in the State of Washington -56 hours per calendar year Holiday pay, including Floating Holidays -13 days per calendar year Work, Personal and Family Time - up to 40 hours per calendar year Parental Leave - 480 hours within one year of the birth/adoption/foster care of a child Bereavement Leave - 240 hours for an immediate family member: 40 hours for an extended family member per calendar year Caregiver Leave - 80 hours in a 52-week rolling period10 days Volunteer Leave - 32 hours per calendar year Military Spouse Time-Off - 80 hours per calendar year Please use the following language: For additional general information on Company benefits, please go to: - *********************************************

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers (******************************************* At **DuPont** , our paid internship and co-op opportunities are designed to give students more than just a glimpse into the professional world-they're a launchpad for your future. You'll work on real, impactful projects alongside experienced DuPont professionals, applying what you've learned in the classroom to solve real-world challenges. Through this hands-on experience, you'll build essential skills, grow your network, and gain exposure to a collaborative, inclusive workplace that values innovation and leadership. You will have the opportunity to collaborate across teams and functions, gaining exposure to innovative technologies and diverse perspectives that drive real-world solutions. **As an Engineering intern or co-op, you'll:** + Embrace DuPont's core values in safety, sustainability, and innovation + Gain industrial experience and insight into our businesses, products, and customers + Work in team-based environments with mentorship and technical training + Participate in professional development opportunities tailored to your role Our student program offers both internships and co-op assignments tailored to fit your academic schedule and career goals. Assignment length and scope may vary by site and function, but every experience is designed to help you grow, contribute, and lead. Typical roles in manufacturing, operations, and business at DuPont span a wide range of exciting and impactful areas, including Manufacturing Technical and Process Engineering, Capital Projects, Automation and Process Control, Leveraged Engineering, Equipment Reliability and Maintenance, Continuous Improvement, Product Quality, and Technical Service. Summer interns and co-ops must be available from May - August. **Requirements** To be considered, the following requirements must be met: + Enrolled as a full-time student pursuing a Bachelor's or Master's degree in Chemical, Mechanical, Electrical or other engineering disciplines from an ABET accredited program + GPA of 3.0 or higher (out of 4.0 scale) + Legal right to work in the U.S. without restriction Join our Talent Community (**************************************************** to stay connected with us! DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information (****************************************************** . DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page (********************************************************** . The Pay range for this role is $16.10 - $25.30 Hourly **How Base Pay is Determined:** DuPont has job leveling frameworks that help organize roles based on progressive levels of responsibility, proficiency and qualifications. Each role has an associated pay range (or an established pay rate for some roles) based on the competitive market in each country where we operate. Each individual's pay is based on a variety of factors, including their role and the associated pay range for that role, their geographic location (i.e., country, state, metropolitan area), as well as their skills, experience, education and certifications, and performance.

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. Ensure that all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met Create, check, and/or review Purchase Technical Specifications for assigned equipment and systems. Provide feedback to design partner if applicable Review and approve basic and detail design (functional design) drawings, arrangements, diagrams, and calculations for accuracy against contract specifications, rules and regulations, and general check for mistakes and consistency. Identify potential installation or operational issues. Provide feedback to design partner for revision Review maker (vendor) furnished drawings and manuals. Check for accuracy against specifications, rules and regulations, missing/inaccurate scope of supply or information, potential installation or operational issues. Provide feedback to the maker for revision Participate in basic and detailed design activities within the Electrical Design Department, which includes, but is not limited to, the detailed review of design to confirm the design is complete, accurate and complies with manufacture requirements, shipyard electrical design standards, vessel contract specifications as well as Class, USCG and other regulatory body rules and regulations Process approved engineering documents using standard Documentation Control System (DCS) to register documents and maintain the database as required Provide field-engineering support as required to support production activities by troubleshooting production concerns that arise during vessel construction Provide feedback to Electrical Basic and Electrical Outfitting Designers based on issues encountered in the field including installation difficulties, missing material / equipment, hardware requirements, testing requirements, and technical specifications Provide field corrections and repair instructions for electrical outfitting items. Assist Electrical Outfitting Designers with developing Design Change Notice (DCN) documentation Maintain working knowledge and monitor development of classification and regulatory rules and requirements pertaining to electrical design of all shipboard electrical systems Provide technical support to test engineers during vessel testing and commissioning Travel domestically and internationally to coordinate efforts of design partners and vendors in order to facilitate progress of basic and detailed design, and resolve outstanding design issues Perform other related duties as required and assigned Address and resolve all system-related issues. COMPETENCIES Communication skills, both verbal and written Decision making/problem solving Organizational understanding Integrity Conflict resolution Strategic thinking Stress Management Willingness and ability to work as a team leader (System Unit Leader) SUPERVISOR RESPONSIBILTY This position has no supervisory responsibilities. EDUCATION AND EXPEREIENCE Bachelor's Degree in Electrical Engineering is preferred; however, candidates with a technical diploma and 10+ years' experience in ship's and/or construction may also be considered Minimum 10 years' experience in shipbuilding, system design system (should have experience in power or control systems) Experience with electrical system or electrical design and construction Proficiency with MS Office and CAD systems such as AutoCAD Knowledge/experience concerning basic and detail ship design Knowledge/experience concerning modern shipbuilding practices Experience with Classification Society Rules for New Construction, IMO Regulations, and US Coast Guard Requirements as well as International experience or familiarity with European and/or Asian Shipbuilding Standards WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. **Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Since the job functions require the individual to enter the production areas, they should have a range of motion sufficient to perform occasional bending, stooping, climbing, standing, etc. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. * Ensure that all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met * Create, check, and/or review Purchase Technical Specifications for assigned equipment and systems. Provide feedback to design partner if applicable * Review and approve basic and detail design (functional design) drawings, arrangements, diagrams, and calculations for accuracy against contract specifications, rules and regulations, and general check for mistakes and consistency. Identify potential installation or operational issues. Provide feedback to design partner for revision * Review maker (vendor) furnished drawings and manuals. Check for accuracy against specifications, rules and regulations, missing/inaccurate scope of supply or information, potential installation or operational issues. Provide feedback to the maker for revision * Participate in basic and detailed design activities within the Electrical Design Department, which includes, but is not limited to, the detailed review of design to confirm the design is complete, accurate and complies with manufacture requirements, shipyard electrical design standards, vessel contract specifications as well as Class, USCG and other regulatory body rules and regulations * Process approved engineering documents using standard Documentation Control System (DCS) to register documents and maintain the database as required * Provide field-engineering support as required to support production activities by troubleshooting production concerns that arise during vessel construction * Provide feedback to Electrical Basic and Electrical Outfitting Designers based on issues encountered in the field including installation difficulties, missing material / equipment, hardware requirements, testing requirements, and technical specifications * Provide field corrections and repair instructions for electrical outfitting items. Assist Electrical Outfitting Designers with developing Design Change Notice (DCN) documentation * Maintain working knowledge and monitor development of classification and regulatory rules and requirements pertaining to electrical design of all shipboard electrical systems * Provide technical support to test engineers during vessel testing and commissioning * Travel domestically and internationally to coordinate efforts of design partners and vendors in order to facilitate progress of basic and detailed design, and resolve outstanding design issues * Perform other related duties as required and assigned * Address and resolve all system-related issues. COMPETENCIES * Communication skills, both verbal and written * Decision making/problem solving * Organizational understanding * Integrity * Conflict resolution * Strategic thinking * Stress Management * Willingness and ability to work as a team leader (System Unit Leader) SUPERVISOR RESPONSIBILTY This position has no supervisory responsibilities. EDUCATION AND EXPEREIENCE * Bachelor's Degree in Electrical Engineering is preferred; however, candidates with a technical diploma and 10+ years' experience in ship's and/or construction may also be considered * Minimum 10 years' experience in shipbuilding, system design system (should have experience in power or control systems) * Experience with electrical system or electrical design and construction Proficiency with MS Office and CAD systems such as AutoCAD * Knowledge/experience concerning basic and detail ship design * Knowledge/experience concerning modern shipbuilding practices * Experience with Classification Society Rules for New Construction, IMO Regulations, and US Coast Guard Requirements as well as International experience or familiarity with European and/or Asian Shipbuilding Standards WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Since the job functions require the individual to enter the production areas, they should have a range of motion sufficient to perform occasional bending, stooping, climbing, standing, etc. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

REQUIREMENTS Candidates must have an undergraduate degree in Electrical Engineering, prior patent prosecution experience, be registered to practice before the USPTO and licensed in Pennsylvania. This position is ideal for those individuals who have attained a high level of academic and professional achievement and wish to hone their skills and grow their practice with a collaborative team in a forward-thinking law firm. RESPONSIBILITIES • Patent drafting, patent prosecution, and IP due diligence; • Responses to office actions; • Prepare, obtain, and analyze patent searches and provide assessments on patentability, prior art, non-infringement, and validity; • Client counseling and portfolio management; • Licensing SUMMARY Vanguard-IP specializes in the placement of IP/Patent professionals nationwide. Our focus provides us with a deeper knowledge of our clients' needs, and our candidates' individual talents and career interests. Our broad network of long-term client relationships also gives us a competitive edge. Our recruiters all have 10+ years of IP recruiting experience, and an exceptional record of success. We have superior knowledge of the IP job market, and offer trusted career advice for our candidates. We also have the resources and high level contacts to get your questions answered. We look forward to speaking with you, and learning more about what you are seeking in your next opportunity. CONFIDENTIALITY At Vanguard-IP, we respect the confidentiality of every candidate who contacts us. We will always contact you to obtain explicit prior authorization before submitting your resume to any of our clients. **Should you have an interest in a similar position in another location, we have hundreds of openings in other markets. Please apply now and our team would be happy to review your information for this or other openings in your location of interest.**

Job Description Automation Controls Engineer, Integrator Seeking talented Engineers for our Electrical, Controls Engineer position to join our innovative team! Are you eager to thrive in a stable, evolving organization that prioritizes your growth? We offer continuous training and coaching while fostering a supportive environment where teamwork and tackling new challenges define each day. Responsibilities: Perform various responsibilities encompassing research, design, testing, and management of electrical systems. Duties include: Project management activities to ensure smooth operations. Directing and coordinating the operation, maintenance, and repair of equipment and systems in field installations as required. Collaborating with team members to troubleshoot control system issues. Engaging with clients to resolve production and design-related concerns. Leading client interaction meetings for project-based initiatives. Overseeing activities to ensure manufacturing, construction, installation, and operational testing meet functional specifications and customer requirements. Interpreting and discussing schematics with clients. Proficiency in AutoCAD, and Microsoft Office Suite. BOM experience and working within an ERP / MRP system preferred, not required Configuration of Variable Frequency Drives (VFDs) and controllers according to client specifications. Designing electrical schematics and general layout drawings based on client specifications. Assisting in firmware flashing and configuration of Programmable Logic Controllers (PLCs) and Human-Machine Interfaces (HMI) upon request. Programming HMIs and PLCs for smaller scale projects as needed. Configuring and setting up computer systems with relevant software. Conducting point-to-point and functional power-up testing of control panels. Assisting engineers with functional testing of engineered systems. Keeping abreast of industry trends and advancements. Qualifications: Bachelor's degree in electrical engineering (EE), Mechanical Engineering (ME), Computer Science, or equivalent field. Experience working with control panels Prior Manufacturing exposure preferred Exposure to Multimeter exposure Proficient problem-solving abilities applicable in practical scenarios. Excellent reporting and communication skills. Proficiency in reading, analyzing, and interpreting safety rules, operating and maintenance instructions, and procedure manuals. Comprehension of electrical circuitry and schematic diagrams. Application of mathematical concepts including probability, statistical inference, and fundamentals of plane and solid geometry, as well as trigonometry. Capability to apply concepts such as fractions, percentages, ratios, and proportions in practical situations. Close vision, and color vision ability required Safely and effectively lifting, carrying, and moving objects of varying weights Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times What we offer: A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member To be a part of a well-established team that values hard work, innovation & knows the value of its people Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management Competitive base package Continuous training - we are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success Competitive health-care package Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team - YOU! 1111111111111111111Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

GreenXT is seeking Junior Level Electrical Engineers to support their Navy customer in the areas of Cybersecure Hull, Mechanical, and Electrical (HM&E) Control Systems and Networks. About GreenXT GreenXT is comprised of technical and business leaders. We hire intelligent, hardworking, and dedicated people who not only possess the desire to learn and improve their skills but want to contribute to the design and development of innovative solutions that address the Navy's greatest technological challenges. We hired each of our employees because we believe they are exceptional, have the ability to excel at their job, and will contribute positively to GreenXT. GreenXT's business office strives to be the most efficient and effective business office supporting our customers. Our personnel aspire to become leaders through organized, rigorous, and diligent efforts. GreenXT employees are always looking to help one another succeed. We look out for each other and cross-train so that the product we deliver is one that we're confident in and proud of. We strongly believe in growth and providing our workforce with career development opportunities to help everyone achieve their goals. We take pride in our support of the United States Navy. We never forget that the work we do is ultimately in support of America's warfighter and serving those who serve. The idea that our hard work can help make their jobs easier, assist them to defend our nation, and can help ensure they return home safely to their loved ones motivates us every day, and we hope that you join us on that mission! Requirements Bachelor of Science Degree in Electrical or Computer Engineering is required Active DoD Secret Level Security Clearance (or the ability to obtain this clearance upon position acceptance) is required for this position 1-3 years of experience in electrical or computer engineering Knowledge of fundamental concepts, practices and procedures with industrial control systems Proficiency in reading electrical diagrams Proficiency in the use of test tools associated with industrial control systems Proficiency in the use of diagnostic tools associated with industrial control systems troubleshooting Proficiency in the use of Microsoft Office suite applications Proficiency in basic computer/laptop use including advanced operations Basic knowledge of network troubleshooting tools Basic Technical writing ability Working knowledge of Navy Organizations Must be capable of working within a team Excellent communication skills, both written and verbal Up to 25% travel may be required Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Ability to work on and climb ladders, aboard ships, in shipyards, under industrial conditions and in confined spaces. Responsibilities: Troubleshooting complex problems of all variants of fielded systems (microprocessor-based control systems) Review of technical documentation related to all variants of fielded systems and future fielded systems Provide test support for all variants of fielded systems Provide software and hardware installation support of all variants of fielded systems Provide technical input to the design of future MCS systems Develop test procedures to exercise requirements of fielded systems and future fielded systems Provide design support for integration of equipment in an industrial/shipboard environment Job Benefits Competitive Pay and PTO 11 Paid Holidays 401(k) with Matching Medical and Dental Insurance Life and Disability Insurance

The future is what you make it. When you join Honeywell, you become a member of our global team of thinkers, innovators, dreamers, and doers who create the technologies that shape the future. This includes transforming the way we fly, fueling jets in an eco-friendly manner, ensuring buildings are smart and safe, and even making it possible to breathe on Mars. Working at Honeywell is not just about developing innovative products; it's about accessing dynamic career opportunities across various fields and industries. Honeywell's Value Engineering (VE) and Component Engineering (CE) Center of Excellence (COE) is a dynamic collective of professionals dedicated to enhancing product development through innovative engineering and strategic component selection. Collaborating closely with GBE's Engineering and Procurement teams, the VE/CE COE is a global entity focused on the critical mission of improving product margins and driving productivity, thereby securing Honeywell's competitive advantage in the global market. As a Hardware Engineer II here at Honeywell, you will contribute to hardware design from concept to production, collaborate on requirements, design complex systems, perform testing, and support junior engineers. You will report directly to our Senior Hardware Engineer Supervisor, and you'll work out of our Fort Washington, PA location on a Hybrid work schedule. In this role, you will impact by shaping the future of Honeywell's product offerings, enhancing product margins, and driving productivity through innovative engineering solutions. At Honeywell, our people leaders play a critical role in developing and supporting our employees to help them perform at their best and drive change across the company. Help to build a strong, diverse team by recruiting talent, identifying, and developing successors, driving retention and engagement, and fostering an inclusive culture. KEY RESPONSIBILITIES + Collaborate within a global team, taking ownership of electrical design in Value Engineering (VE) and Component Engineering (CE). + Design and develop Field Instruments, including Industrial Pressure Transmitters, Temperature Transmitters, Mercury Instruments, and Industrial Measuring & Control Instruments. + Responsibilities include schematic development, circuit analysis, component selection, detailed design, verification testing, deriving inferences from test results, and interfacing with cross-functional/support teams. YOU MUST HAVE + Bachelor's degree from an accredited institution in a technical discipline such as science, technology, engineering, mathematics. + 8 - 12 years of experience in developing Electrical / Hardware design. + **Strong understanding of Analog and Digital Electronics design.** + Hands-on experience with various serial communication protocols such as SPI and I2C. + Experience in PCB schematics and exposure to layout design using ORCAD/Mentor Graphics. WE VALUE + Experience in Value Engineering and Component Engineering and knowledge in methodologies. + Strong analytical and communication skills. + Ability to conceptualize products and translate requirements into Critical to Quality (CTQ) parameters for design. + Understanding of product certification requirements. + Hands-on experience with various serial communication protocols such as SPI and I2C. - Practical knowledge of Microcontroller interfacing, Analog to Digital data conversion, and designing with op-amps, transistors, MOSFETs, linear & switching regulators, and current output (4-20mA) circuits. + Familiarity with Value Engineering and alternative methods to achieve the same performance at a lower cost. + Awareness of the latest technologies and low-cost alternative designs/technologies is preferred. + Knowledge of sensors, instrumentation, and signal conditioning electronics. + Ability to conceptualize products and translate requirements into Critical to Quality (CTQ) parameters for design. + Experience in PCB schematics and exposure to layout design using ORCAD/Mentor Graphics. + Strong business communication skills: interacting with partners at global locations, local team members, management stakeholders, and customers for requirements capturing. Due to compliance with U.S. export control laws and regulations, candidates must be a U.S. Person, defined as a U.S. citizen, a U.S. permanent resident, or someone with protected status in the U.S. under asylum or refugee status, or the ability to obtain an export authorization. In addition to a competitive salary, leading-edge work, and the opportunity to develop solutions alongside dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information on Honeywell Benefits, visit: (******************************** The application period for this position is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. **Job Posting Date: November 26, 2025. Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments - powered by our Honeywell Forge software - that help make the world smarter, safer and more sustainable. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

The future is what you make it. When you join Honeywell, you become a member of our global team of thinkers, innovators, dreamers, and doers who create the technologies that shape the future. This includes transforming the way we fly, fueling jets in an eco-friendly manner, ensuring buildings are smart and safe, and even making it possible to breathe on Mars. Working at Honeywell is not just about developing innovative products; it's about accessing dynamic career opportunities across various fields and industries. Honeywell's Value Engineering (VE) and Component Engineering (CE) Center of Excellence (COE) is a dynamic collective of professionals dedicated to enhancing product development through innovative engineering and strategic component selection. Collaborating closely with GBE's Engineering and Procurement teams, the VE/CE COE is a global entity focused on the critical mission of improving product margins and driving productivity, thereby securing Honeywell's competitive advantage in the global market. As a Hardware Engineer II here at Honeywell, you will contribute to hardware design from concept to production, collaborate on requirements, design complex systems, perform testing, and support junior engineers. You will report directly to our Senior Hardware Engineer Supervisor, and you'll work out of our Fort Washington, PA location on a Hybrid work schedule. In this role, you will impact by shaping the future of Honeywell's product offerings, enhancing product margins, and driving productivity through innovative engineering solutions. At Honeywell, our people leaders play a critical role in developing and supporting our employees to help them perform at their best and drive change across the company. Help to build a strong, diverse team by recruiting talent, identifying, and developing successors, driving retention and engagement, and fostering an inclusive culture. YOU MUST HAVE Bachelor's degree from an accredited institution in a technical discipline such as science, technology, engineering, mathematics. 8 - 12 years of experience in developing Electrical / Hardware design. Strong understanding of Analog and Digital Electronics design. Hands-on experience with various serial communication protocols such as SPI and I2C. Experience in PCB schematics and exposure to layout design using ORCAD/Mentor Graphics. WE VALUE Experience in Value Engineering and Component Engineering and knowledge in methodologies. Strong analytical and communication skills. Ability to conceptualize products and translate requirements into Critical to Quality (CTQ) parameters for design. Understanding of product certification requirements. Hands-on experience with various serial communication protocols such as SPI and I2C. - Practical knowledge of Microcontroller interfacing, Analog to Digital data conversion, and designing with op-amps, transistors, MOSFETs, linear & switching regulators, and current output (4-20mA) circuits. Familiarity with Value Engineering and alternative methods to achieve the same performance at a lower cost. Awareness of the latest technologies and low-cost alternative designs/technologies is preferred. Knowledge of sensors, instrumentation, and signal conditioning electronics. Ability to conceptualize products and translate requirements into Critical to Quality (CTQ) parameters for design. Experience in PCB schematics and exposure to layout design using ORCAD/Mentor Graphics. Strong business communication skills: interacting with partners at global locations, local team members, management stakeholders, and customers for requirements capturing. Due to compliance with U.S. export control laws and regulations, candidates must be a U.S. Person, defined as a U.S. citizen, a U.S. permanent resident, or someone with protected status in the U.S. under asylum or refugee status, or the ability to obtain an export authorization. In addition to a competitive salary, leading-edge work, and the opportunity to develop solutions alongside dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information on Honeywell Benefits, visit: (******************************** The application period for this position is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. **Job Posting Date: November 26, 2025. KEY RESPONSIBILITIES Collaborate within a global team, taking ownership of electrical design in Value Engineering (VE) and Component Engineering (CE). Design and develop Field Instruments, including Industrial Pressure Transmitters, Temperature Transmitters, Mercury Instruments, and Industrial Measuring & Control Instruments. Responsibilities include schematic development, circuit analysis, component selection, detailed design, verification testing, deriving inferences from test results, and interfacing with cross-functional/support teams.

Join Us: Finding a better way. It's what we do, in creating solutions, helping people, and improving our world. Imagine yourself at CHA, tackling some of the world's most critical challenges - around clean water, safe roads, efficient energy, resilient power sources, and buildings. Imagine yourself contributing your skills and passion to creating a world that is more sustainable, more diverse, and one that leans forward towards a better future. Our people are approachable, caring, down to earth, plugged in, and hands-on. They are skilled, thoughtful, and innovative. Can you imagine yourself here? CHA is looking for someone with your passion to join our 2026 Summer Internship Program! If you are earning your degree in Electrical Engineering and are interested in an internship working in one of our many disciplines, apply today to join us in finding a better way. What You'll Do: CHA's Internship Program will ensure you are ready to make the transition from student to professional. Over our 10-week program, you will have plenty of opportunities to connect with people who will help you on your career journey. You will connect with your peers through group projects, planned social events, and working alongside one another in the office or field. You will connect with professionals across the business, collaborating on a company projects and important work that will have a real, positive impact on the world we all live in. The connections you make during your CHA Internship can play a critical role as you complete your studies and transition into your professional career. The Internship Program here at CHA aims to prepare students for the professional working environment through opportunities to work as part of a team, developing the planning skills to effectively balance work demands with your personal life, and figuring out how to navigate different personalities to ensure team success. Our program is more than just an internship; you will learn about yourself; identify your career passions and go after them. As a CHA Intern you will experience working in your field - there is nothing like real world experience! An internship with CHA will help you clarify and bring into focus your future career goals, it will give you the opportunity to try new things, explore and discover what you want for your future. So, join us for summer 2026; let's find a better way together! Want to learn more about how CHA is finding a better way? Visit us online at CHAsolutions.com What You Bring: * Working towards an Electrical Engineering degree * Attending a full time matriculated and nationally accredited Bachelor or Graduate program. * Completed one full year of college (rising sophomore). * Candidates going into their junior or senior year of college are preferred. * May 2026 graduates will not be accepted for CHA's Internship program. * Experience with Microsoft Office required. * Experience with AutoCAD preferred. * Must possess the ability to work in a team environment. * Good oral and written communication skills required. Culture/EEO Statement: At CHA, we work every day to create solutions, help people, and improve our world, committed to creating and fostering excellence in our diverse and highly talented teams. Our teams continually strive to find better ways - always searching, never settling - to achieve extraordinary results. Our values around hiring, training, and community engagement reflect a company culture that is inclusive and forward leaning, always pushing the limits of what is possible. We as an organization celebrate the values of inclusion and equality, and advocate for the full participation of all people in an environment free of discrimination. To support these values, we invite all qualified applicants to be considered for employment regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, age, disability, protected veteran status, or any other characteristic protected by law.

CRB's nearly 1,400 expert professionals drive innovative, life-changing and life-saving solutions for manufacturers in the life sciences and food and beverage industries. Our mission, vision, and core values put client satisfaction and employee experience at the center of everything we do. As an AEC firm, we proudly specialize in industries that inherently carry important social responsibility - we recognize our impact and influence in the communities we serve and pursue corporate responsibility through the lens of people, community, and planet. From oncology and rare disorders to COVID-19 or alternative proteins, our design and construction projects are pioneering solutions addressing important issues such as food scarcity and global health. Job Description Launch your career with purpose at CRB. As an Electrical Engineering Intern, you'll contribute to real-world projects that support the design and construction of advanced facilities for clients in the life sciences and food & beverage industries. At CRB, we're proud to deliver integrated solutions that bring complex, high-impact facilities to life. You'll gain hands-on experience, collaborate across disciplines, and work alongside professionals who are invested in your growth. This is more than an internship; it's your opportunity to learn, make an impact, and help deliver facilities that produce life-changing therapies and feed millions around the world. How will I contribute? As an Electrical Engineer Intern, you will work under the direction of an assigned mentor to develop and implement project deliverables. As an Electrical Engineer Intern, you will focus on the design and engineering of power, lighting, grounding/bonding, special systems; e.g., tel/ data, security, fire alarm, raceway, cable tray and other electrical control and building support systems into the built work environment. Project work may include all levels of design such as studies, conceptual and schematic design, design development, construction documentation, and construction administration. Core Responsibilities * Typical tasks and deliverables include power load, illumination, short circuit, voltage drop calculations, basis of design reports, code evaluations, single line diagrams, plans, schedules, installation details, specifications, and coordination with manufacturers and construction trade partners. Tasks will include utilizing computer aided drafting and engineering software. * Developing project documents (e.g., calculations, reports, construction drawings and specifications, etc.) for clients in coordination with regulatory bodies and industry standards. * Assisting with development of conceptual designs and coordinating with the design team under direction of the project team lead. * Coordinating with multiple disciplines and other internal and external team members (e.g., vendors, clients, and contractors). Qualifications Qualifications: * Currently pursuing a Bachelor's or Master's degree in Electrical Engineering or Architectural Engineering from an accredited program * Available to work full-time during the internship period: May-August 2026 * Proficiency in Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, OneNote) * Strong interest in the Food & Beverage or Life Sciences industries * Excellent problem-solving skills with the ability to analyze complex data and develop actionable insights * Strong communication and collaboration skills, with the ability to work effectively across disciplines and with internal and external stakeholders (vendors, clients, contractors) * Eagerness to learn about the AEC industry and apply academic knowledge to real-world engineering applications * Willingness to relocate or work in one of CRB's internship locations, which may include: Kansas City (MO), Raleigh (NC), Orange County (CA), Philadelphia (PA), St. Louis (MO), Boston (MA), San Diego (CA), Kalamazoo (MI), Denver (CO), and/or Rockville (MD) Preferred Qualifications * Experience with power systems strongly preferred * Working towards Fundamental of Engineering Exam registration or completion preferred * Familiarity with AutoCAD, Revit and 3D collaboration tools (Navisworks, BIM360 Suite, Assemble) * Familiarity with industry-specific regulations and standards within the AEC industry * Prior internship or co-op experience in Electrical Engineering or related field Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.