Electronics technician jobs in Cedar Park, TX - 387 jobs

BAS Technician - DDC Controls Salary: Up to $108,000/year (DOE) Vehicle: Company-provided Ford Ranger Employment Type: Full-Time About the Role We are looking for an experienced BAS Technician to install, service, and maintain DDC building automation systems. The ideal candidate will have hands-on experience with Siemens or Distech controls and strong HVAC knowledge. This role involves fieldwork, troubleshooting, and optimizing building systems. Responsibilities Install, program, and maintain DDC BAS systems Troubleshoot and resolve control, network, and device issues Work with Siemens and/or Distech platforms Read and interpret control drawings and sequences Optimize control strategies for HVAC equipment (AHUs, VAVs, chillers, boilers) Maintain documentation and service reports Support preventive maintenance and system upgrades Requirements 3+ years as a BAS/Controls Technician Experience with Siemens or Distech DDC controls Strong HVAC and control system knowledge Electrical troubleshooting and low-voltage controls experience Valid driver's license and ability to work independently

The Silkscreen Technician is responsible for setting up, operating, and maintaining screen printing equipment to produce high quality printed graphics on a variety of substrates (metal, fiberglass, carbon fiber, etc.). The role blends technical skill, attention to detail, and an eye for color and registration to ensure each run meets customer specifications, quality standards, and production schedules. Key Responsibilities Pre-Production & Setup • Review job orders, artwork files, and client specifications (colors, size, placement, substrate). • Prepare screens: coat with emulsion, expose using UV light, wash out images, and inspect for pinholes. • Select and stretch appropriate mesh count for each job. • Register screens accurately using registration marks or alignment tools. Ink & Material Management • Mix custom inks to match client-specified colors, maintaining consistent viscosity. • Store inks, solvents, and cleaning chemicals safely and label them per OSHA/site standards. • Track inventory of screens, squeegees, substrates, and consumables; request re-orders as needed. Printing Operations • Load substrates onto the press (manual). • Adjust squeegee pressure, angle, and speed for optimal ink transfer. • Perform multi-color prints, ensuring precise registration for each pass. • Conduct test prints, make adjustments, and obtain approval before full run. Quality Control • Inspect prints for color fidelity, registration, ink density, and defects (smudges, streaks, ghosting). Post-Production • Cure or dry prints using ovens or air-dry methods as required. • Clean screens, squeegees, and press components after each job. Safety & Housekeeping • Follow all safety protocols (PPE, ventilation, proper chemical handling). • Maintain a clean, organized work area; dispose of waste according to environmental regulations. Skills Required Technical Skills • Proficient in screen preparation (emulsion coating, exposure, washing). • Ability to mix and match epoxy inks (solvent-based). • Knowledge of color theory and registration techniques. • 1-3?years of hands-on screen-printing experience (commercial, apparel, or fine-art). • Familiarity with manual screen-printing presses is preferred. Experience Required • 1-3?years of hands-on screen-printing experience (commercial, apparel, or fine-art). • Familiarity with manual screen-printing presses is preferred. Technical Skills • Proficient in screen preparation (emulsion coating, exposure, washing). • Ability to mix and match epoxy inks (solvent-based). • Knowledge of color theory and registration techniques. Physical Requirements • Ability to stand for long periods, lift up to 50?lb, and perform repetitive motions. • Good hand-eye coordination and visual acuity for detailed inspection. • No known sensitivity or allergy to thinners, solvents, or epoxy-ink fumes. Software • Basic proficiency with graphic-design file formats (AI, EPS, PDF) and RIP software is advantageous. • Basic proficiency with MS office suite (Outlook, Word, Excel) is required. Safety Awareness • Understanding of OSHA regulations, MSDS, and proper PPE usage. Education Required • High school diploma or GED required. • Associate's degree or certification in graphic arts, printing technology, or related field is a plus.

Job Posting Start Date 01-20-2026 Job Posting End Date 02-28-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary Engineering Technician -5 role at Flex involves performing hands-on debugging, validation, and system-level failure analysis of next-generation server and rack systems within a high-mix, high-ambiguity manufacturing environment. This position requires advanced technical skills and the ability to provide guidance and training to other technical personnel The technician will collaborate with engineering teams, contribute to documentation, and monitor equipment productivity while adhering to safety guidelines Troubleshoots and repairs complex mechanical and electrical assemblies used in equipment at the component level Installing and configuring infrastructure including servers, racks, switches and other hardware including liquid cooling, power Provides technical assistance and guidance to other technical personnel Collaborates with engineering on functionality issues and procedure updates Presents training, when necessary, to the new build and service assembler teams Contributes to the development of work instructions, batch records, equipment logs, material specifications and other device history documents Helps monitor productivity of our equipment by tracking yields and equipment cycle rates Assists with the installation, debug and validation of Test equipment Follows all safety guidelines and reports unsafe conditions to supervisor Develops and maintains Debug Guide to troubleshoot PCBA Provides training and PCBA debugging guidance to other debug technicians SPECIALIZED JOB RESPONSIBILITIES may be required for certain positions. These could include one or more of the following duties: Assist with the development and delivery of customer presentations and interface with customers. Partner with engineers on outside third-party developments Organize documentation (specifications, schematics, and procedures). Perform tests per customer specifications and requirements. Education / Experience Typically requires an Associates degree, military training, equivalent vocational training, or equivalent experience. Typically requires 10 years of related experience. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Description Royalty Staffing is helping our client hire hands-on Automotive & Robotics Techs to support the build, maintenance, and operation of robotic platforms and modified vehicles. In this role, you will have a blend of mechanical, electrical, and field support work. Ideal candidates have hands-on experience in automotive or robotics-related fields and are skilled in using diagnostic tools, reading technical diagrams, and working with electrical systems and components. You enjoy working on real-world systems in a fast-moving, technical environment. Location - Austin, TX Work environment - onsite Expected pay amount - 22.00 - 30.00 USD Per Hour Schedule - Monday - Friday, 9AM-6PM (Central Time) Assignment length - 12 month contract As an Automotive & Robotics Technician, you'll: Install and integrate sensors, compute modules, wiring harnesses, and other custom hardware. Diagnose and repair mechanical and electrical issues on robotic systems and vehicle platforms. Perform preventative maintenance, retrofits, and hardware updates as needed. Support field deployments by providing on-site service, troubleshooting, and hardware swaps. Collaborate with engineering and operations teams to support testing and prototyping. Maintain tools, inventory, and clear documentation of repairs and procedures. Requirements Requirements Experience in automotive service, automotive retrofit, robotics, or a similar technical field Proficient with mechanical and electrical tools, multimeters, and diagnostic equipment Ability to read and follow mechanical drawings and wiring diagrams Comfortable working with AC/DC systems, connectors, and electronic modules Valid driver's license and ability to travel locally as needed Able to lift up to 50 lbs and work in field environments Strong attention to detail and problem-solving mindset Team player with strong communication skills and adaptability Nice to Have: Experience with electric vehicles, autonomous systems, or sensor installation Soldering, crimping, or basic prototyping skills Benefits Pre-tax commuter benefits Employer subsidized Healthcare Benefits Flexible Spending Account for healthcare-related costs Company covers all costs for short and long-term disability and life insurance 401k package

Job Description Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add an Electronics Manufacturing RF Technician III to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for the manufacturing of Cesium's diverse array of electronic assemblies for space and aerospace platforms. Cesium partners with contract manufacturers (CMs) and in-house manufacturing to fabricate and assemble our products. As such, you will serve as Cesium's in-house expert and primary point-of-contact for testing and qualifying Cesium's assemblies. Day-to-day responsibilities range from highly technical manufacturing/design analysis and root cause of non-conformances - such as component specification drift and manufacturing process improvements - to administrative functions like supplier review and process documentation. Your work will have a direct impact on the success of the company. You will work closely with both the manufacturing and design engineering team, program management, and external contract manufacturers to industrialize space products for a growing market that combines the rigor of space with the scale of commercial electronics.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS An Associate of Applied Science (AA) with a minimum of 2-4 years of experience. Extensive directly related experience may qualify in lieu of education requirement. Experience with Design for Manufacturability (DFM) of electronics hardware. Knowledge of industry standards such as IPC-A-610 and J-STD-001. Experience with nonconformance documentation, root cause analysis, corrective action systems, and acceptance criteria. Excellent written and verbal communication skills. PREFERRED EXPERIENCE Experience in statistical process control. Experience in aerospace or other high-reliability industries. Proficiency with PLM and ERP software. Proficiency in AS9100/ISO9001 quality management system requirements. Proficiency in lean manufacturing methodologies. Experience successfully tackling multiple high-priority tasks. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

at Commercial Kitchen Parts & Service The Shop & Tech Helper will maintain the day to day maintenance at the building locations and office. This position is to provide support and assistance on installs as well as day to day service calls. Essential Responsibilities & Accountabilities: Maintain the cleanliness of the shop area daily Ensure the upkeep and maintenance of the building, shop and office Maintains safe and clean working environment Receive and load equipment for delivery Make weekly runs to turn in scrap equipment and parts Provide maintenance and cleanliness of branch delivery truck Make ready and wash branch fleet/vans Parts Runner, occasionally will deliver parts to service technicians as needed Provide support and assistance on service installs (some evenings/weekends may be required) Must be able to travel out of town for numerous days at a time Any other duties as assigned Qualifications: Possess a valid Texas Driver's License Clean driving record and background check Ability to work with minimal or no supervision Set and prioritize responsibilities Handle a variety of work assignments Proficient in MS Office and other computer applications Strong organizational, time management and multi-tasking skills Education and/or Experience: High School or GED Equivalent Commercial Food Equipment Service Association a plus EPA Universal Certification a plus

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Job DescriptionSalary: $20.00 - $29.00 per hour + OT (DOE) Whowe are Since 1972, Kier + Wright has beendriven by people, communities and the places that bring us together. With every project, we work to build connections and strengthen relationships. Through our work, we strive to keep communities moving forward, growing sustainably, steadily and purposefully toward a better tomorrow.For more information about our services, visitkierwright.com. EEO SUMMARY The Engineering Technician will be in charge of independently producing engineering design plans for public works project and land development, utilizing AutoCAD software. They will be responsible for working with an engineering design team from initial concepts to final plan production. They will also draft various sketches, plans, and exhibits using CAD. RESPONSIBILITIES Technical Carries out tasks assigned by the Project Lead and engineering team. Drafting grading, drainage, utility, street frontage improvements, and stormwater management plans in AutoCAD Civil 3D. Proficient in AutoCAD Civil3D grading feature lines and utility pipe networks. Preparing drawings per company and public agency CAD standards and project-dependent CAD specifications. EDUCATION + EXPERIENCE 0-2 years of experience in a position requiring intensive AutoCAD/Civil 3D Experience drafting on-site and off-site improvement drawings for land development projects. General knowledge of computers, Microsoft office, Adobe, Internet, etc. Experience with BlueBeam a plus. SKILLS Employee Self-Management Skills Collaboration: Effective working relationships with management, coworkers, subordinates and clients. Mutual respect. Listening to others, adapting to changes, debating alternatives, being open-minded and producing a superior outcome as the result of effective teamwork. Problem Solving: The ability to develop a timely, efficient solution or alternative when a posed with a problem; thinking outside the box; paying attention to the details. Responsiveness/Communication: Communicating in a prompt and professional manner; providing relevant and timely information to management, coworkers, subordinates and clients in a clear, concise and direct manner. Self-Responsible: Taking control and accountability; not waiting for others to direct. Efficient: Ability to maintain focus, stay organized, manage multiple tasks and complete work within deadlines, with minimal errors in a fast-paced environment. Adaptable: Ability to modify practices, systems or attitudes to align with new requirements. Specialty Skills Understanding Civil3D, AutoCAD Basic understanding of Civil Engineering Basic understanding of topographic and boundary surveys Ability to understand and interpret design intent as communicated by engineers. PHYSCIAL REQUIREMENTS AND/OR WORKING CONDITIONS Prolonged periods of sitting (up to 8 hours a day for office staff) Interacting with technology (computer, cellphone, etc.) Ability to lift and/or carry items ( up to 20 lbs.) Prolonged periods of standing/walking (field checks) Ability to work outdoors in various weather conditions (field checks) Occasional travel e.g. driving to offices, jobsites, client meetings, etc. Why Kier + Wright? Great culture Team Collaboration, Innovative problem solving, Responsive to clients, Passionate about work Competitive Pay ($20 - $29/hr + overtime DOE + location) Paid Holidays Free office snacks Much more!

**About Austin Industrial** Austin Industrial delivers premier maintenance, construction, and soft craft services to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. Our team of 4,000 employee-owners, equipped with innovative technology and optimized procedures, helps owners optimize safety, productivity, profit margins, and cost-efficiency. **Instrumentation Technician - (8** **plus years Journeyman experience) Plant Maintenance experience preferred. Heavy on instrument.** Must be able to test, calibrate, troubleshoot, overhaul and repair controlling, indicating and measuring instrument devices to ensure specified operating performance using hand tools, testing and calibrating instruments and equipment and precision measuring instruments. Ability to read and understand manuals, blueprint schematics and testing specifications. Must have some knowledge of electrical schematics and PLCs. Other duties may be assigned. Plant Maintenance experience preferred. Heavy on instrument. **Specific Duties and Responsibilities:** + Reads and works from related blueprints and other schematic drawings. + Calibrates, installs and/or removes various instrumentation devices. + Cuts, bends and installs tubing needed for the proper installation of the instrumentation device. + When needed, reads and understands quality control manuals and testing specifications in order to obtain data needed to test or calibrate specific devices. + Sets controls to regulate factors, such as current flow, timing cycle, pressure or vacuum, or temperature according to specifications. + As needed, disassembles instrument or device in order to determine cause of defective operation or failure. + Rejects malfunctioning devices and routes to specified departments for repair or salvaging of survivable parts. + Layout, fabricate and install tubing and tub trays. + Apply knowledge of mathematics to instrumentation, such as ratio and proportions, numbers with power of 10's, algebra equations, English-to-metric conversion, inches of water to PSI, inches of mercury to PSI, etc. + Read blueprints, schematics and loop drawings and prepare job reports. + Assemble and disassemble all types of electronic process controls, pneumatic controls and hydraulic systems and components. + Calibrate equipment using common calibration procedures and be able to read, interpret, apply and know where to find other procedures. + Understand the principles of pH and redox and equipment needed to measure them and be able to control the pH and redox of a liquid. + Understand steam and how it reacts to different situations, (e.g. saturation properties). + Work with the principles of chemistry and physics required in instrumentation such as specific gravity, density of liquids and solids, mechanical advantages, proportions of liquids, melting points, freezing points, boiling points of liquids, etc. + Troubleshoot and check out electrical, pneumatic, and hydraulic systems using proper test equipment. + Understand fundamental instrumentation loops and how they function as a loop, and what the function of each component part is in each type of loop. + Understand common types of chemical plant process equipment such as distillation columns, heat exchangers, boilers, turbines and compressors. + Apply the procedures for measuring pressure level, flow, temperature, weight, density, heat flux, humidity and moisture, etc. + Maintain current electrician's license or identification card to meet state regulations. + Other duties as assigned. + Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position. + The role involves extensive use of computers for data entry, documentation, analysis, and internal communication. + Candidates must be comfortable and proficient in the full suite of Microsoft Office (Word, Excel, PowerPoint, Outlook, Teams, OneNote, etc.) and able to learn new office applications quickly. + Familiarity with enterprise CMMS (Computer‑Aided Maintenance Management System) software and Confluence is required for daily task management, issue tracking, and collaboration. **Physical Demands:** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. **Qualifications Required for this Position:** **Education:** High school diploma, Journeyman experience in maintenance training; **Certifications/ Licenses: NCCER, TDLR Electrical License a plus and valid ID** **Experience:** **Maintenance - Instrumentation Technician (** **8 plus years Journeyman experience) Plant Maintenance experience preferred. Heavy on instrument.** **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Industrial is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Licenses & Certifications** **Preferred** + OSHA 30 + OSHA 10 + NCCER-Inst Tech Certified + NCCER-Ind Elec Cert Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

ICON is looking to add a Senior Printing Test Technician, Titan to ensure the efficient, compliant, and high-performance testing of ICON's technology. Reporting to the Testing Lead, this role will oversee test preparation and execution, manage material and printer logistics, inventory, and reporting, and support troubleshooting, repairs, and part replacements. RESPONSIBILITIES Test Execution and Leadership * Ensure daily understanding of shift success criteria to meet test needs, schedule and budget requirements. * Coordinate the delivery and inventory of building materials to ensure the team is fully prepared for success. * Maintain clear and professional communication with team members under pressure and across the ICON organization. * Take ownership of steady machine or test rig operation and collaborate with ICON teams as necessary to address and resolve operational issues. * Oversee execution and coordination of all test build activities including foundation prep, top plate installation, shoring, and bond beams. * Work closely with other Senior Titan Testing Technicians to maintain operational efficiency. * Provide supervision and guidance to Titan Testing Technicians in alignment with company policies and management directives. * Manage site support equipment as required during the shift. * Perform build activities including reinforcement adjustment and placement as needed. * Execute and document QC measurements on material samples during operations. Service and Repairs * Coordinate and perform repairs as necessary when printer issues arise, including coordinating parts, performing replacements, and conducting calibrations. * Connect and disconnect electrical, pneumatic, and network cabling to ensure proper printer mobility and setup. * Terminate camlock power cables and EtherCAT cables with proficiency. * Navigate remotely into devices (printers, filling stations) and utilize Twincat for navigation, reset, and topology management. * Utilize a multimeter effectively to diagnose and resolve issues. * Troubleshoot systems virtually or in person, using schematics or other documentation to resolve issues. * Manage inventory of replacement parts and coordinate their delivery, ensuring accurate record-keeping in ticketing systems. * Update and maintain accurate work steps and status within the ticketing system for each service request. * Efficiently set up, configure, and troubleshoot generators. * Demonstrate a deep understanding of hydraulic systems and their maintenance. * Minimize downtime by identifying root causes of technical issues and implementing timely solutions. * Maintain advanced proficiency in PLCs, VFDs, and electrical systems, having completed Beckhoff Learning Foundations and Machine Builder Core Functionality courses provided by ICON. Performance and Data Reporting * Ensure 100% compliance with Standard Operating Procedures (SOP) for all technicians on shift. * Provide real-time, proactive reporting and progress updates, including milestones, throughout prints, mobilizations, and build activities. MINIMUM QUALIFICATIONS * Associate's degree or relevant technical certification with at least 3+ years of hands-on experience, OR 5+ years of hands-on experience in manufacturing, fabrication, or a related field, OR 2+ years in a supervisory or leadership role within a technical environment. * Must have held the Field Operations Lead title. * Proven experience supervising and guiding Field Operations Technicians, ensuring alignment with company policies and management directives. * Ability to coordinate the delivery and inventory of building materials to ensure the team is fully prepared for success. * Extensive experience coordinating and performing repairs as necessary when printer issues arise, including coordinating parts, performing replacements, and conducting calibrations. * Ability to collaborate with sustaining engineering teams to resolve complex technical challenges. * Expert proficiency in troubleshooting and maintaining complex systems across electrical, mechanical, and software domains. * Advanced skills in preventative maintenance, proactively identifying and addressing potential system issues to ensure efficient operations. * Extensive hands-on experience with diagnostic tools and systems, including multimeters, PLCs, VFDs, and TwinCAT. * In-depth knowledge and experience in managing hydraulic systems, including advanced troubleshooting, maintenance, and repairs. * Exceptional documentation skills, ensuring detailed and accurate records of troubleshooting steps and repairs in compliance with ICON's standards. * Proven experience with the completion and documentation of printer downtime attribution. * Experience accurately tracking and documenting all build activity steps in Procore, from the initial print through the completion of the structure. * Expertise in terminating camlock power cables and EtherCAT cables, demonstrating high technical skill in electrical systems management. * Advanced proficiency in operating heavy machinery to ensure smooth function. * Proven understanding of ICON printer product quality. * Thorough understanding of ICON's products, services, and systems, with the ability to apply knowledge effectively in operations. * Strong verbal and written communication skills, essential for collaboration and coordination across all team levels. * Demonstrated leadership ability, with a passion for working in and leading teams toward collective goals. * Proven ability to take initiative, proactively identify and resolve obstacles, and implement continuous improvement strategies. * Excellent prioritization and time management skills, with the ability to thrive in dynamic, fast-paced environments. * Fluency in English. PREFERRED SKILLS AND EXPERIENCE * Bachelor's or Master's degree in a relevant field such as Manufacturing, Maintenance, Field Operations, Engineering, or a related discipline. * Familiarity with multi-axis machines, including CNCs and 3D printers. * Proficiency with Google and Microsoft applications and a demonstrated ability to quickly learn and adapt to new software platforms. WORKING CONDITIONS: * Ability to lift and carry up to 50 pounds safely and regularly. * Comfortable working in various outdoor environments, including extreme temperatures (above 100°F or below freezing), sun, rain, mud, and areas with limited infrastructure (e.g., lack of electricity). * Comfortable standing and moving on your feet for the majority of the workday as well as climbing ladders and carrying material buckets. * Willingness to travel outside of Austin, TX, for multiple weeks at a time. * Flexible availability to work nights and weekends as needed. * Ability to work in Austin, TX, and surrounding areas (up to 50 miles).

Fort Carson, Colorado, US Austin, Texas, US Fort Cavazos, Texas, US San Antonio, Texas, US Technician 12502 Full-Time None $5 - $200000 Description & Qualifications** Description & Qualifications** If you enjoy working on high profile and challenging engineering projects supporting the US Army,Serco hasa great opportunityfor you! TheEngineering Technicianwill be part of adynamicteam at our Fort Carson, CO location. Bring yourexpertiseand collaborative skills to make an impact towards our military defense and safety of our Soldiers. Serco supports the US Army as a primecontractorfor their Next Generation Command and Control (NGC2) contract which supports implementing capabilities that enable the service to employ Command Posts (CP) across the operational spectrum. Our team develops, integrates, andmaintainsmodern and mobile solutions for an integrated CP infrastructure. You will be partof ateam that works closely with the customer and other Serco functional area teams to deliver quality systemsand associated supporting documentation. The team has been recognized by the Army Customer and the industry for theiroutstanding contributions to the contract and program. In this role, you will: + Plan and performroutine andnon-routinehardwareassembly andintegrationassignments of substantial variety and complexitythatare typically part of broader assignments. + Construct components, subunits, or simple models;adapt standard equipment; troubleshoot and correct malfunctions + Follow specific layout and scientific diagrams to construct and package simple devices and subunits of equipment + Performmoderate to complex vehicle integration tasks to include cable routing, metal work installations, and technical support to integrate, install,modify, and perform upgrades in support of C5ISR systems + Provide occasionalassistanceto related support areas including but not limited to kitting and warehouse operations + Use, care,andmaintaincrimp tools, heat gun, and various electrical and mechanical tools. + Troubleshoot basic electrical issues for equipment installed/integrated in military vehicles + Utilize various test, measurement, and diagnostic equipment (TMDE) (i.e.multimeters, clamp meters, spectrum analyzers, etc.) + Determineequipment malfunctionsand applyskill in restoring equipment operation + Fabricateorassistwith fabrication ofa variety ofradio frequency (RF), data, and power cables using solderingand crimp techniques + Assemble, integrate, and install various metal and electronic components + Read and interpret technical drawings for fabrication and installationof commercial and custom metal and electronic mounts and components + Apply your mechanical aptitude and experience with a range of hand and power tools + Occasionally work in austere conditions (field environments) + Travel to U.S. Army bases around the country to perform testing and maintenance on Army equipment installed by Serco Inc. To be successful in this role, you musthave: + A highschool diploma/GED with 3 years' of relevant experience + OR anassociatedegreewith1 year of relevant experience + Ability to travel up to 25%. Additionallydesiredexperience and skills: + Experience with military vehicles + Basic metal fabrication + Basic cable fabrication + Automotive/mechanical troubleshooting + Generator maintenance and troubleshooting + Experience with the integration of Army Tactical C5ISR systems and vehicle platforms + Fiber / BICSI / Certifications If you are interested in supporting and working with our military and a passionate Serco team,thensubmityour application now for immediate consideration. It only takes a few minutes and could change your career! **Company Overview** Serco Inc. (Serco) is the Americas division of Serco Group, plc. In North America, Serco's 9,000+ employees strive to make an impact every day across 100+ sites in the areas of Defense, Citizen Services, and Transportation. We help our clients deliver vital services more efficiently while increasing the satisfaction of their end customers. Serco serves every branch of the U.S. military, numerous U.S. Federal civilian agencies, the Intelligence Community, the Canadian government, state, provincial and local governments, and commercial clients. While your place may look a little different depending on your role, we know you will find yours here. Wherever you work and whatever you do, we invite you to discover your place in our world. Serco is a place you can count on and where you can make an impact because every contribution matters. To review Serco benefits please visit: ************************************************ . If you require an accommodation with the application process please email: ******************** or call the HR Service Desk at ************, option 1. Please note, due to EEOC/OFCCP compliance, Serco is unable to accept resumes by email. Candidates may be asked to present proof of identify during the selection process. If requested, this will require presentation of a government-issued I.D. (with photo) with name and address that match the information entered on the application. Serco will not take possession of or retain/store the information provided as proof of identity. For more information on how Serco uses your information, please see our Applicant Privacy Policy and Notice. Serco does not accept unsolicited resumes through or from search firms or staffing agencies without being a contracted approved vendor. All unsolicited resumes will be considered the property of Serco and will not be obligated to pay a placement or contract fee. If you are interested in becoming an approved vendor at Serco, please email ********************* . Serco is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. **Pay Transparency** Our Total Rewards package includes competitive pay, performance-based incentives, and benefits that promote well-being and work-life balance-so you can thrive both professionally and personally. Eligible employees also gain access to a wide range of benefits from comprehensive health coverage and health savings accounts to retirement plans, life and disability insurance, and time-off programs that support work-life balance. Program availability may vary based on factors such as contract type, location, hire date, and applicable collective bargaining agreements. Salary range: The hourly amount for this position can be found at the top of this posting. This role is covered by the Service Contract Act. For positions on this contract, we will pay the prevailing wage rate for the location in which the employee is working, as determined by the Department of Labor and the Wage Determination (WD). The wage rate will vary depending on the locality. Additionally, you will receive Health and Welfare Benefits based on the WD for the contract. Benefits - Comprehensible benefits for full-time employees (part-time members receive a limited package tailored to their role): + Medical, dental, and vision insurance + Robust vacation and sick leave benefits, and flexible work arrangements where permitted by role or contract + 401(k) plan that includes employer matching funds + Tuition reimbursement program + Life insurance and disability coverage + Optional coverages that can be purchased, including pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Employee Assistance Plan that includes counseling conditions + Specific benefits are dependent upon the specific contract as well as whether the position is covered by a collective bargaining agreement or Service Contract Labor Standards. To review all Serco benefits please visit: ******************************************* . Serco complies with all applicable state and local leave laws, including providing time off under the Colorado Healthy Families and Workplaces Act for eligible Colorado residents, in alignment with our policies and benefit plans. The application window for this position is for no more than 60 days. We encourage candidates to apply promptly after the posting date, as the position may close earlier if filled or if the application volume exceeds expectations. Please submit applications exclusively through Serco's external (or internal) career site. If an applicant has any concerns with job posting compliance, please send an email to: ******************** .

VVater is a US-based, next-generation water treatment company that aims to provide Water for Humankind with a cornerstone of sustainability and a promise of a better, healthier tomorrow, servicing various industries and markets around the world from Real Estate, Wastewater Treatment, Municipal Potable Water, and multiple others, in particular, focusing on the recovering and recycling of different waters in a centralized or decentralized way. The company also provides artificial beaches, urban lagoons, wave pools, surf parks, aquatics services, sewage treatment, wastewater treatment, and drinking water solutions. Job Summary: VVater seeks a highly skilled Mechatronics Technician to build, integrate, and troubleshoot advanced electro-mechanical systems that include actuators, servos, motors, hydraulic and pneumatic components, motion assemblies, and automated mechanisms. This role supports R&D, engineering, product development, and production by turning designs into working automated systems, ranging from deployable mechanical structures to motion-controlled assemblies used in VVater's next-generation water treatment technologies. The ideal candidate is a hands-on problem solver who thrives in a fast-paced engineering environment and is fluent across mechanical, electrical, and automation disciplines. Duties and Responsibilities: Assemble and integrate actuators, servo motors, linear guides, rotary drives, gear systems, solenoids, and automated linkages into working mechanical systems. Build and maintain hydraulic and pneumatic subsystems, including cylinders, valves, regulators, manifolds, pumps, and fluid routing hardware. Install and route sensor packages (limit switches, optical sensors, encoders, proximity sensors, pressure/flow sensors) for feedback and control. Perform electrical wiring, termination, crimping, labeling, and cable management for automation assemblies. Support controls engineers with integration of PLC/SCADA and low-voltage control signals (24VDC, analog/digital I/O). Interpret mechanical drawings, electrical schematics, hydraulic diagrams, motion drawings, and 3D CAD output to guide assembly and troubleshooting. Assist in building robotic or transformer-like mechanisms that extend, fold, lift, rotate, engage, or change physical configuration automatically. Execute functional testing, calibration, alignment, and tuning of electro-mechanical assemblies. Troubleshoot automation faults, diagnose issues in actuators, drives, sensors, relays, control loops, and mechanical subassemblies. Assist in creating automated test rigs, dynamic fixtures, and motion-based prototypes for R&D validation. Collaborate with mechanical, electrical, R&D, and fabrication teams to refine designs and improve repeatability and manufacturability. Perform light machining, drilling, tapping, cutting, grinding, and assembly prep as needed. Maintain shop equipment, tools, wiring stations, hydraulic lines, and safety protocols. Support pilot units, factory builds, field installations, and commissioning when required. Perform all other duties as instructed by the company. Skills and Qualifications: • 3-7+ years of hands-on experience as a Mechatronics Technician, Automation Technician, Electromechanical Technician, Robotics Technician, or related role. • Strong experience with actuators, servos, linear actuators, hydraulic cylinders, pneumatic systems, valves, pumps, and motion assemblies. • Ability to read and interpret mechanical drawings, electrical schematics, wiring diagrams, hydraulic/pneumatic schematics, and P&IDs. • Proficient in electrical wiring, cable harnessing, crimping, soldering, and connectorization. • Familiarity with PLC/automation signals (24VDC, analog inputs, digital I/O) and drive controls. • Strong mechanical aptitude and ability to diagnose multi-discipline issues (mechanical/electrical/hydraulic). • Experience using hand tools, power tools, metrology tools, and shop equipment. • Knowledge of basic machining or fabrication (CNC, drill press, grinders, band saws) is a plus. • Technical diploma or associate degree in Mechatronics, Industrial Automation, Electromechanical Technology, Robotics, or similar field preferred. • Experience in water treatment equipment, industrial machinery, automation, aerospace, automotive systems, or robotics environments is an advantage. • Strong communication skills and ability to work cross-functionally with engineering, R&D, fabrication, and field teams. Note: This job description is not exhaustive. Additional duties and responsibilities may be added as the role evolves and as projects demand. Flexibility and a willingness to adapt are essential qualities for this position. **As a part of our process to ensure a comprehensive evaluation of all applicants, assessment tests are required as part of our recruitment process. Unfortunately, should you elect not to participate in completing the assessment tests, your application will not be able to progress to the next stage or taken into consideration during evaluation.

Job Posting Start Date 01-14-2026 Job Posting End Date 03-30-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary Principle Accountabilities: Performs complex engineering tests, checkouts, and development engineering tasks. Analyzes engineering test results, and implements changes to resolve problems. Collects data, analyzes results and implements procedures. Reviews project instructions and blueprints to ascertain test specifications, procedures, objectives, test equipment, nature of technical problem and possible solutions such as part redesign, substitution of material or parts or rearrangement of parts or subassemblies. Devises, fabricates and assembles new or modified mechanical components or assemblies for products such as industrial equipment and machinery, power equipment, server systems, machine tools and measuring instruments. Sets up and conducts tests of complete units and components under operational conditions to investigate design, or to obtain data for development, standardization, quality control and problem resolution Analyzes indicated and calculated test results in relation to design or rated specifications and test objectives, and modifies or adjusts equipment to meet specifications. Records test procedures and results, numerical and graphical data, and recommendations for changes in product or test method. Maintains software, documentation and equipment to the latest revision or operational specifications. Assists engineers in developing and designing hardware and software required to test customer products per their specifications. Trains technicians and operators on products, processes and equipment. SPECIALIZED JOB RESPONSIBILITIES may be required for certain positions. These could include one or more of the following duties: Assist with the development and delivery of customer presentations and interface with customers. Partner with engineers on outside third party developments Organize documentation (specifications, schematics, and procedures). Perform tests per customer specifications and requirements. Education / Experience Typically requires an Associates degree, military training, equivalent vocational training, or equivalent experience. Typically requires 4 years of related experience. Knowledge / Skills / Abilities Has awareness of new technologies/ techniques. Demonstrates detailed functional knowledge and may lead process. Demonstrates advanced technical skills. Has awareness of Flex technologies/ techniques. Demonstrates basic functional and/or process knowledge and participates in process. Requires basic competency related to function. Demonstrates technical skills. Ability to write reports, business correspondence and procedures. Ability to effectively present information and respond to questions from managers and customers. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret an extensive variety of technical instructions. Certificates, Licenses, Registrations Technical high school degree Scope / Impact Moderate impact. May have influence on multiple programs or areas. Decision Making / Discretion Limited expectations to make decisions outside immediate work assignments. Decisions only affect individual. Supervision / Leadership Requires general instructions on routine assignments and detailed instructions on new assignments. Typically requires close supervision Work Environment: While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, work that requires repetitive motion, toxic or caustic chemicals and risk of electrical shock. Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to handle small components, reach with hands and arms, stoop, kneel, crouch, crawl, talk and hear. The employee frequently is required to stand, walk and sit. The employee is occasionally required to climb or balance. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, and depth perception. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Royalty Staffing is helping our client hire hands-on Automotive & Robotics Techs to support the build, maintenance, and operation of robotic platforms and modified vehicles. In this role, you will have a blend of mechanical, electrical, and field support work. Ideal candidates have hands-on experience in automotive or robotics-related fields and are skilled in using diagnostic tools, reading technical diagrams, and working with electrical systems and components. You enjoy working on real-world systems in a fast-moving, technical environment. Location - Austin, TX Work environment - onsite Expected pay amount - 22.00 - 30.00 USD Per Hour Schedule - Monday - Friday, 9AM-6PM (Central Time) Assignment length - 12 month contract As an Automotive & Robotics Technician, you'll: Install and integrate sensors, compute modules, wiring harnesses, and other custom hardware. Diagnose and repair mechanical and electrical issues on robotic systems and vehicle platforms. Perform preventative maintenance, retrofits, and hardware updates as needed. Support field deployments by providing on-site service, troubleshooting, and hardware swaps. Collaborate with engineering and operations teams to support testing and prototyping. Maintain tools, inventory, and clear documentation of repairs and procedures. Requirements Requirements Experience in automotive service, automotive retrofit, robotics, or a similar technical field Proficient with mechanical and electrical tools, multimeters, and diagnostic equipment Ability to read and follow mechanical drawings and wiring diagrams Comfortable working with AC/DC systems, connectors, and electronic modules Valid driver's license and ability to travel locally as needed Able to lift up to 50 lbs and work in field environments Strong attention to detail and problem-solving mindset Team player with strong communication skills and adaptability Nice to Have: Experience with electric vehicles, autonomous systems, or sensor installation Soldering, crimping, or basic prototyping skills Benefits Pre-tax commuter benefits Employer subsidized Healthcare Benefits Flexible Spending Account for healthcare-related costs Company covers all costs for short and long-term disability and life insurance 401k package

Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add an Electronics Manufacturing RF Technician III to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for the manufacturing of Cesium's diverse array of electronic assemblies for space and aerospace platforms. Cesium partners with contract manufacturers (CMs) and in-house manufacturing to fabricate and assemble our products. As such, you will serve as Cesium's in-house expert and primary point-of-contact for testing and qualifying Cesium's assemblies. Day-to-day responsibilities range from highly technical manufacturing/design analysis and root cause of non-conformances - such as component specification drift and manufacturing process improvements - to administrative functions like supplier review and process documentation. Your work will have a direct impact on the success of the company. You will work closely with both the manufacturing and design engineering team, program management, and external contract manufacturers to industrialize space products for a growing market that combines the rigor of space with the scale of commercial electronics.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS An Associate of Applied Science (AA) with a minimum of 2-4 years of experience. Extensive directly related experience may qualify in lieu of education requirement. Experience with Design for Manufacturability (DFM) of electronics hardware. Knowledge of industry standards such as IPC-A-610 and J-STD-001. Experience with nonconformance documentation, root cause analysis, corrective action systems, and acceptance criteria. Excellent written and verbal communication skills. PREFERRED EXPERIENCE Experience in statistical process control. Experience in aerospace or other high-reliability industries. Proficiency with PLM and ERP software. Proficiency in AS9100/ISO9001 quality management system requirements. Proficiency in lean manufacturing methodologies. Experience successfully tackling multiple high-priority tasks. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

The Shop & Tech Helper will maintain the day to day maintenance at the building locations and office. This position is to provide support and assistance on installs as well as day to day service calls. Essential Responsibilities & Accountabilities: * Maintain the cleanliness of the shop area daily * Ensure the upkeep and maintenance of the building, shop and office * Maintains safe and clean working environment * Receive and load equipment for delivery * Make weekly runs to turn in scrap equipment and parts * Provide maintenance and cleanliness of branch delivery truck * Make ready and wash branch fleet/vans * Parts Runner, occasionally will deliver parts to service technicians as needed * Provide support and assistance on service installs (some evenings/weekends may be required) * Must be able to travel out of town for numerous days at a time * Any other duties as assigned Qualifications: * Possess a valid Texas Driver's License * Clean driving record and background check * Ability to work with minimal or no supervision * Set and prioritize responsibilities * Handle a variety of work assignments * Proficient in MS Office and other computer applications * Strong organizational, time management and multi-tasking skills Education and/or Experience: * High School or GED Equivalent * Commercial Food Equipment Service Association a plus * EPA Universal Certification a plus

Saronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job OverviewWe're seeking an Electromechanical Technician to ensure the operational readiness and reliability of our autonomous surface vessels for the DoD. You will be responsible for diagnosing, repairing, and maintaining ASVs and remain instrumental in sustaining mission-critical assets and ongoing operations.Responsibilities Conduct comprehensive diagnostic assessments of ASVs and their components to identify issues and malfunctions Perform timely and efficient repairs, replacements, and adjustments to restore ASVs to optimal functionality Collaborate closely with engineering and technical teams to troubleshoot complex problems and implement effective solutions Conduct thorough testing and quality assurance procedures to validate repairs and ensure compliance with performance standards Document all repair activities, including findings, procedures, and outcomes, adhering to company protocols and industry regulations Maintain an organized inventory of spare parts, tools, and equipment necessary for depot repair operations Assist in the development and optimization of repair procedures and protocols to enhance efficiency and effectiveness Provide technical support and training to field technicians and end-users as needed Qualifications Associate degree or technical certification in electronics, mechanical engineering, or a related field. Bachelor's degree preferred Experience in depot-level repair and maintenance of complex electronic and mechanical systems, preferably in the maritime or defense industry Proficiency in troubleshooting, diagnosing, and repairing electrical, electronic, and mechanical components and systems Familiarity with autonomous systems, marine navigation, and control systems is preferred Strong analytical and problem-solving skills with attention to detail Experience working with the DoD or government contracts is a plus Benefits Medical Insurance: Comprehensive health insurance plans covering a range of services Saronic pays 100% of the premium for employees and 80% for dependents Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care Saronic pays 99% of the premium for employees and 80% for dependents Time Off: Generous PTO and Holidays Parental Leave: Paid maternity and paternity leave to support new parents Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses Retirement Plan: 401(k) plan Stock Options: Equity options to give employees a stake in the company's success Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands Ability to perform physically demanding work for extended periods of time, up to 12 hours/day Frequently and repetitively, lift, push and carry up to 20 lbs. The ability to carry 20 lbs. up and down stairs Ability to work outside for an extended period of time Frequently and repetitively, bend, lift and reach to install vehicle parts of varying size and weight overhead, accurately and in allotted timeframes Ability to stand and walk for up to 12 hours/day, including over varied and uneven terrain Stoop, lay, bend, reach, squat, kneel, crouch, twist and crawl for extended periods of time, including up to 12 hours/day Climb and maintain balance on ladders, platforms, or other high structures Ability to find issues in a work process and be alert to safety signals using sight, touch, and hearing Demonstrated ability to handle and manipulate tooling and mechanically fasten bolts within required cycle time Exposures to hazardous materials and ability to follow waste handling/disposal procedures Wearing Personal Protective Equipment, including but not limited to safety glasses, safety shoes, hearing protection, gloves and adhering to prescribed safety rules and guidelines This role requires access to export-controlled information or items that require “U.S. Person” status. As defined by U.S. law, individuals who are any one of the following are considered to be a “U.S. Person”: (1) U.S. citizens, (2) legal permanent residents (a.k.a. green card holders), and (3) certain protected classes of asylees and refugees, as defined in 8 U.S.C. 1324b(a)(3). Saronic does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits.

Who we are Since 1972, Kier + Wright has been driven by people, communities and the places that bring us together. With every project, we work to build connections and strengthen relationships. Through our work, we strive to keep communities moving forward, growing sustainably, steadily and purposefully toward a better tomorrow. For more information about our services, visit kierwright.com. EEO SUMMARY The Engineering Technician will be in charge of independently producing engineering design plans for public works project and land development, utilizing AutoCAD software. They will be responsible for working with an engineering design team from initial concepts to final plan production. They will also draft various sketches, plans, and exhibits using CAD. RESPONSIBILITIES Technical Carries out tasks assigned by the Project Lead and engineering team. Drafting grading, drainage, utility, street frontage improvements, and stormwater management plans in AutoCAD Civil 3D. Proficient in AutoCAD Civil3D grading feature lines and utility pipe networks. Preparing drawings per company and public agency CAD standards and project-dependent CAD specifications. EDUCATION + EXPERIENCE 0-2 years of experience in a position requiring intensive AutoCAD/Civil 3D Experience drafting on-site and off-site improvement drawings for land development projects. General knowledge of computers, Microsoft office, Adobe, Internet, etc. Experience with BlueBeam a plus. SKILLS Employee Self-Management Skills Collaboration: Effective working relationships with management, coworkers, subordinates and clients. Mutual respect. Listening to others, adapting to changes, debating alternatives, being open-minded and producing a superior outcome as the result of effective teamwork. Problem Solving: The ability to develop a timely, efficient solution or alternative when a posed with a problem; thinking outside the box; paying attention to the details. Responsiveness/Communication: Communicating in a prompt and professional manner; providing relevant and timely information to management, coworkers, subordinates and clients in a clear, concise and direct manner. Self-Responsible: Taking control and accountability; not waiting for others to direct. Efficient: Ability to maintain focus, stay organized, manage multiple tasks and complete work within deadlines, with minimal errors in a fast-paced environment. Adaptable: Ability to modify practices, systems or attitudes to align with new requirements. Specialty Skills Understanding Civil3D, AutoCAD Basic understanding of Civil Engineering Basic understanding of topographic and boundary surveys Ability to understand and interpret design intent as communicated by engineers. PHYSCIAL REQUIREMENTS AND/OR WORKING CONDITIONS Prolonged periods of sitting (up to 8 hours a day for office staff) Interacting with technology (computer, cellphone, etc.) Ability to lift and/or carry items ( up to 20 lbs.) Prolonged periods of standing/walking (field checks) Ability to work outdoors in various weather conditions (field checks) Occasional travel e.g. driving to offices, jobsites, client meetings, etc. Why Kier + Wright? Great culture - Team Collaboration, Innovative problem solving, Responsive to clients, Passionate about work Competitive Pay ($20 - $29/hr + overtime DOE + location) Paid Holidays Free office snacks Much more!

ICON is looking to add a Senior Printing Test Technician, Titan to ensure the efficient, compliant, and high-performance testing of ICON's technology. Reporting to the Testing Lead, this role will oversee test preparation and execution, manage material and printer logistics, inventory, and reporting, and support troubleshooting, repairs, and part replacements. RESPONSIBILITIES Test Execution and Leadership Ensure daily understanding of shift success criteria to meet test needs, schedule and budget requirements. Coordinate the delivery and inventory of building materials to ensure the team is fully prepared for success. Maintain clear and professional communication with team members under pressure and across the ICON organization. Take ownership of steady machine or test rig operation and collaborate with ICON teams as necessary to address and resolve operational issues. Oversee execution and coordination of all test build activities including foundation prep, top plate installation, shoring, and bond beams. Work closely with other Senior Titan Testing Technicians to maintain operational efficiency. Provide supervision and guidance to Titan Testing Technicians in alignment with company policies and management directives. Manage site support equipment as required during the shift. Perform build activities including reinforcement adjustment and placement as needed. Execute and document QC measurements on material samples during operations. Service and Repairs Coordinate and perform repairs as necessary when printer issues arise, including coordinating parts, performing replacements, and conducting calibrations. Connect and disconnect electrical, pneumatic, and network cabling to ensure proper printer mobility and setup. Terminate camlock power cables and EtherCAT cables with proficiency. Navigate remotely into devices (printers, filling stations) and utilize Twincat for navigation, reset, and topology management. Utilize a multimeter effectively to diagnose and resolve issues. Troubleshoot systems virtually or in person, using schematics or other documentation to resolve issues. Manage inventory of replacement parts and coordinate their delivery, ensuring accurate record-keeping in ticketing systems. Update and maintain accurate work steps and status within the ticketing system for each service request. Efficiently set up, configure, and troubleshoot generators. Demonstrate a deep understanding of hydraulic systems and their maintenance. Minimize downtime by identifying root causes of technical issues and implementing timely solutions. Maintain advanced proficiency in PLCs, VFDs, and electrical systems, having completed Beckhoff Learning Foundations and Machine Builder Core Functionality courses provided by ICON. Performance and Data Reporting Ensure 100% compliance with Standard Operating Procedures (SOP) for all technicians on shift. Provide real-time, proactive reporting and progress updates, including milestones, throughout prints, mobilizations, and build activities. MINIMUM QUALIFICATIONS Associate's degree or relevant technical certification with at least 3+ years of hands-on experience, OR 5+ years of hands-on experience in manufacturing, fabrication, or a related field, OR 2+ years in a supervisory or leadership role within a technical environment. Must have held the Field Operations Lead title. Proven experience supervising and guiding Field Operations Technicians, ensuring alignment with company policies and management directives. Ability to coordinate the delivery and inventory of building materials to ensure the team is fully prepared for success. Extensive experience coordinating and performing repairs as necessary when printer issues arise, including coordinating parts, performing replacements, and conducting calibrations. Ability to collaborate with sustaining engineering teams to resolve complex technical challenges. Expert proficiency in troubleshooting and maintaining complex systems across electrical, mechanical, and software domains. Advanced skills in preventative maintenance, proactively identifying and addressing potential system issues to ensure efficient operations. Extensive hands-on experience with diagnostic tools and systems, including multimeters, PLCs, VFDs, and TwinCAT. In-depth knowledge and experience in managing hydraulic systems, including advanced troubleshooting, maintenance, and repairs. Exceptional documentation skills, ensuring detailed and accurate records of troubleshooting steps and repairs in compliance with ICON's standards. Proven experience with the completion and documentation of printer downtime attribution. Experience accurately tracking and documenting all build activity steps in Procore, from the initial print through the completion of the structure. Expertise in terminating camlock power cables and EtherCAT cables, demonstrating high technical skill in electrical systems management. Advanced proficiency in operating heavy machinery to ensure smooth function. Proven understanding of ICON printer product quality. Thorough understanding of ICON's products, services, and systems, with the ability to apply knowledge effectively in operations. Strong verbal and written communication skills, essential for collaboration and coordination across all team levels. Demonstrated leadership ability, with a passion for working in and leading teams toward collective goals. Proven ability to take initiative, proactively identify and resolve obstacles, and implement continuous improvement strategies. Excellent prioritization and time management skills, with the ability to thrive in dynamic, fast-paced environments. Fluency in English. PREFERRED SKILLS AND EXPERIENCE Bachelor's or Master's degree in a relevant field such as Manufacturing, Maintenance, Field Operations, Engineering, or a related discipline. Familiarity with multi-axis machines, including CNCs and 3D printers. Proficiency with Google and Microsoft applications and a demonstrated ability to quickly learn and adapt to new software platforms. WORKING CONDITIONS: Ability to lift and carry up to 50 pounds safely and regularly. Comfortable working in various outdoor environments, including extreme temperatures (above 100°F or below freezing), sun, rain, mud, and areas with limited infrastructure (e.g., lack of electricity). Comfortable standing and moving on your feet for the majority of the workday as well as climbing ladders and carrying material buckets. Willingness to travel outside of Austin, TX, for multiple weeks at a time. Flexible availability to work nights and weekends as needed. Ability to work in Austin, TX, and surrounding areas (up to 50 miles). ICON is an equal opportunity employer committed to fostering an innovative, inclusive, diverse and discrimination-free work environment. Employment with ICON is based on merit, competence, and qualifications. It is our policy to administer all personnel actions, including recruiting, hiring, training, and promoting employees, without regard to race, color, religion, gender, sexual orientation, gender identity, national origin or ancestry, age, disability, marital status, veteran status, or any other legally protected classification in accordance with applicable federal and state laws. Consistent with the obligations of these laws, ICON will make reasonable accommodations for qualified individuals with disabilities. Furthermore, as a federal government contractor, the Company maintains an affirmative action program which furthers its commitment and complies with recordkeeping and reporting requirements under certain federal civil rights laws and regulations, including Executive Order 11246, Section 503 of the Rehabilitation Act of 1973 (as amended) and the Vietnam Era Veterans' Readjustment Assistance Act of 1974 (as amended). Headhunters and recruitment agencies may not submit candidates through this application. ICON does not accept unsolicited headhunter and agency submissions for candidates and will not pay fees to any third-party agency without a prior agreement with ICON. As part of our compliance with these obligations, the Company invites you to voluntarily self-identify as set forth below. Provision of such information is entirely voluntary and a decision to provide or not provide such information will not have any effect on your employment or subject you to any adverse treatment. Any and all information provided will be considered confidential, will be kept separate from your application and/or personnel file, and will only be used in accordance with applicable laws, orders and regulations, including those that require the information to be summarized and reported to the federal government for civil rights enforcement purposes. Internet Applicant Employment Notices