Electronics technician jobs in Cedar Rapids, IA - 103 jobs

Req No. 2026-5519 Category Technicians Additional Locations US-IA-Cedar Falls Type Regular Full-Time Union or Non-Union Non-Union Division Rental Company Altorfer Inc Working Hours/Days 7:00 AM - 4:00 PM Monday- Friday, some Saturdays and overtime as needed. Overview Perform maintenance, diagnosis, and repairs in the field, on customer owned or Altorfer rental lift trucks/forklifts, Caterpillar, and other allied type construction equipment. Location areas to be serviced are: Cedar Rapids, IA., Cedar Falls, IA. and Dubuque, IA. Basic Duties Provide exceptional service to our customers by performing maintenance, diagnosis, and repairs on allied type construction and lift truck equipment. Assist in the decision if equipment needs to be transported into the shop to complete repairs. Establish and maintain service-oriented working relationship with customers. Plan and execute the repair of various pieces of rental equipment. Provide excellent customer service to all customers. Complete service reports and all other paperwork before and after repairs are made May perform other related duties as requested and/or assigned. Keep current with industry standards. Qualifications Successful completion of a formal technical training program preferred or a minimum of 2 years of previous related work experience required. Previous experience working on electric, diesel engines, hydraulic systems, fuel systems, drivetrain, brake systems, etc. and possess troubleshooting skills. Automotive and Industrial Maintenance Technicians encouraged to apply. Computer literate and proficient with programs such as Microsoft Word, Excel, Access and Outlook required. Knowledge of Cat software preferred. Must take initiative, be team oriented and willing to adapt to change. Ability to write professional business communication when sending emails, letters, notes, and documenting is required. Must be a self-starter, well organized and able to work in a fast-paced environment. Ability to follow all safety rules and wear proper safety equipment. Excellent customer service skills are needed. Must be able to safely lift 75 lbs, bend, twist, and climb. Must possess a valid driver's license with clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on final candidate). Physical Requirements/Working Conditions This position will work in the field/shop environment and at Customer jobsites. May on a continuous basis carry, bend and lift; up to 75 lbs. Will be required to wear appropriate safety equipment (IE- steel toed boots, hard hat, safety glasses with side shields, hearing protection, cut resistant gloves, etc.) for a given situation. The noise level in the work environment is usually moderate to high. Must be flexible to work varying schedules and hours as needed. Travel between locations is required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran . Why Work for Altorfer? At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is crucial to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with. Need help finding the right job? We can recommend jobs specifically for you! Click here to get started.

Employee Type: Full time Job Type: Production Maintenance Job Posting Title: Electronic Technician About Us: TreeHouse Foods (NYSE: THS) is a leading manufacturer of private label packaged foods and beverages, operating a network of over 20 production facilities and several corporate offices across the United States and Canada. At TreeHouse Foods, our commitment to excellence extends beyond our products and revolves around our people. We are investing in talent and creating a performance-based culture where employees can do their best work and develop their careers, directly impacting our mission to make high quality, affordable food for our customers, communities, and families. We hope you will consider joining the team and being part of our future. Named one of America's Best Large Employers by Forbes Magazine, we are proud to live by a strong set of values and strive to "Engage and Delight - One Customer at a Time." Guided by our values-Own It, Commit to Excellence, Be Agile, Speak Up, and Better Together. We are a diverse team driven by integrity, accountability, and a commitment to exceptional results. We embrace change, prioritize continuous learning, and foster collaboration, transparency, and healthy debate. Together, we set each other up for success to achieve enterprise-wide goals. What You Gain: Competitive compensation and benefits program! Enrollment in our wellness and employee assistance programs! Paid holidays, vacation, and other competitive paid time off opportunities! An inclusive working environment where you can build meaningful work relationships with a diverse group of people Leaders who are invested in supporting your career growth. Opportunities to be recognized for outstanding contributions to your team through our employee recognition programs. Job Description: About the Role: The Electronic Technician role at the Cedar Rapids location provides support to the Production team, driving and supporting key initiatives to improve performance throughout the plant. You'll add value to this role by performing various functions including, but not limited to: Complete assigned planned electronic/maintenance on time. Complete tasks from work orders assigned in time allotted. Ensure assigned spaces are kept in a clean and free of clutter. Work closely with the production supervisor on production needs. Comply with the requirements defined within the contents of the GMP'S, Hazard Analysis Critical Control Points (HACCP), LO/TO procedures, and Food Safety programs with the Confined Space Entry Important Details: This is a full-time permanent role on Afternoon shift, which operates from 3:00p to 11:00p Mon-Fri. schedule. This role pays $36.40/hour + shift differential. $3,000 Sign on Bonus: Paid after 60 working day probationary period (will need to be paid back if leave prior to 6 months continuous service). About You: You'll fit right in if you have: Demonstrated experience in electronics and maintenance applications along with following work instructions Experience in a manufacturing environment - food manufacturing a plus The ability to work overtime and weekends TreeHouse Use Only: #IND1 Your TreeHouse Foods Career is Just a Click Away! Click on the “Apply” button or go directly to ****************************** to let us know you're ready to join our team! At TreeHouse Foods, we embrace diversity and inclusion for innovation and growth. We are committed to building inclusive teams and an equitable workplace for our employees to bring their true selves to work to help us “Engage and Delight - One Customer at a Time”. TreeHouse Foods is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact disability-accommodations@treehousefoods.com TreeHouse Use Only: #IND1

The Electrical Technician is responsible for installing, repairing, and maintaining electrical wiring systems, fixtures, and related components within telecommunications equipment shelters. This role works with both AC and DC systems, including low voltage, single-phase, and three-phase power, to ensure reliable and safe electrical infrastructure for telecom operations. The Electrical Technician follows the National Electrical Code (NEC), company specifications, and customer requirements, while maintaining a strong commitment to safety and quality workmanship. Duties/Responsibilities: Install and repair electrical wiring systems and fixtures in telecom equipment shelters, including: Low voltage (data, alarming, control, 12V to 48V DC systems), rectifiers, and battery systems. 120/240V single phase, 120/208V 3-phase, and 277/480V 3-phase systems. Troubleshoot and service issues with electrical panels and systems, including communications, digital/analog signal, DC power, and AC power up to 480V. Install conduits and raceways for electrical wires and cables, ensuring compliance with applicable electrical codes. Install equipment grounding systems per customer specifications. Test electrical systems to verify proper installation, operation, and safety compliance. Inspect electrical systems to determine repair or upgrade needs. Replace conduit, wiring, and circuit breakers as necessary. Work safely and cooperatively with co-workers, contractors, and the public. Maintain a clean, organized, and safe work environment. Install all electrical systems in compliance with NFPA 70 National Electrical Code and company specifications. Adhere to all company and industry safety standards. Perform other related duties as assigned. Required Skills/Abilities: Ability to read and interpret blueprints, schematics, and work orders. Extensive knowledge of electrical systems, wiring, and circuit construction. Ability to route and secure wiring in an organized and logical manner. Proficient in the use of hand tools and power tools. Skilled in pipe bending and installation (EMT, PVC, threaded rigid). Proficient in the use of test meters and diagnostic equipment. Strong analytical and problem-solving skills. Ability to operate forklift, telehandler, and aerial lift. Strong interpersonal skills and ability to work effectively as part of a team. Proficiency with Microsoft applications and smartphones/tablets for timekeeping, email, and documentation. Education and Experience: High school diploma or equivalent required Relevant electrical experience required Apprentice or Journeyman Electrician preferred Physical Requirements: Ability to see color for identifying color-coded wiring. Prolonged periods standing, kneeling, bending, and climbing ladders or scaffolding. Physical capability to pull wires and cables through conduits. Must be able to lift 50 pounds at a time. Benefits: Health, Dental and Vision Insurance Company-paid $50K Life Insurance, short-term disability, and Long-term Disability Insurance 401k with up to 4% Company Match Paid Maternity/Paternity Leave 9 Paid Holidays Paid Time Off (PTO) Corporate rate gym membership Per diem when traveling Employee Assistance Program (EAP) This role is full-time and presents an opportunity to work in a fast-growing industry, leveraging your expertise to make a significant impact on company growth and success. CellSite Solutions, LLC is committed to being an Equal Opportunity Employer. Recognizing the value of diversity and inclusion, we actively strive to build a team reflecting individuals from a wide range of backgrounds and experiences. We welcome applications from all races, religions, national origins, genders, and age groups, as well as veterans and persons with disabilities. As part of our commitment to maintaining a safe, drug-free workplace, pre-employment and random drug screenings are routinely conducted. Please note that employment for this position is contingent upon successful completion of standard background checks. Adherence to general construction, industry, and specific company safety policies is required. Salary Description $20.00 - $45.00 per hour

** **Electrical/Instrumentation Technician** **Pay Rate** : $37.25/hr. Opportunity to get to $48 **Physical Location** : Cedar River Mill 4600 C St SW Cedar Rapids, IA 52404 ************ **Category/Shift** : Hourly Full-Time + Days (6am-4:00pm - Monday-Thursday/Tuesday-Friday (rotating 4-day weekends off)) + May cover rotating shift hours periodically (12hr Dupont Schedule) **Job Requirements** + At least 18 years of age + Minimum high school graduate, GED, or equivalent work experience + Eligible for employment in the US **AND** the following: + At least three (3) years of work experience in INSTRUMENTATION **AND** ELECTRICAL systems + **Must** be willing to meet the following requirements: + Work in industrial conditions (may be warm/hot, dusty/dirty, around hazardous chemicals, noise, heavy machinery, elevated working surfaces, and confined spaces (with proper safety training and safety protection) + Undergo technical online testing, interview, and a formal hands-on assessment of skills + Undergo a drug screen for illicit use of drugs as a condition of employment + Undergo a job-related health assessment as a condition of employment + Submit to periodic drug screens as a condition of employment + Work any shift and/or a rotating shift schedule + Work overtime on a regular basis and with last minute notification + Work holidays and/or weekends on a regular basis + Wear required safety equipment **It is preferred that candidates have the following skills and/or experience(s):** + Associates degree and/or certification(s) in Industrial Maintenance or other related disciplines within instrumentation/electrical. + At least five (5) years of work experience in INSTRUMENTATION **AND** ELECTRICAL systems + Relevant work experience in an industrial environment. **The Job You Will Perform:** This position will work alongside journeymen-level Electrical/Instrumentation maintenance technicians in routine maintenance work as well as performing many duties independently. Our world class Global Manufacturing Training program provides paid hands-on experiences and classroom instruction in order to prepare you for your next promotion Duties include, but are not limited to: Instrumentation: + Troubleshoot, configure, maintain: + PLC systems + Single loop controls for various field systems- Instillation, calibration, troubleshooting various manufactures of analog and SMART instruments and analytical equipment- Shop and field repair of final control elements such as pneumatic valves, electric valves, solenoid operated valves, calibration of pneumatic and SMART valve positioners- Reading and interpreting electrical schematics- Routine and regulatory calibration of field instruments for boilers and environmental systems - Troubleshoot, maintain pneumatic and hydraulic systems - Read and redline loop sheets, P&IDs - Read and interpret wiring diagrams & electrical schematics - Understand and follow NFPA70E regulations involving Arc Flash and Shock hazards - Calibration and maintaining control instrumentation **AND** Electrician: - Troubleshoot, install, repair AC and DC drive systems as well as stand-alone process drives of various manufacturers - Troubleshoot, install, maintain various electrical components such as mechanical limit, proximity, photo electric, speed and reflective switches - Reading and interpreting electrical schematic - Perform repairs and preventive maintenance on 480v thru 13.8kv power distribution switchgear - Understand and follow NFPA70E regulations involving Arc Flash and Shock hazards **The Skills You Will Bring:** + Critical Thinking - Analyze and use logic to address issues + Team Player - Collaborate and work cooperatively across a multifunctional team + Dependability - Being reliable, responsible, and dependable + Self-Motivation - Exerting effort towards training to move up to next position and accepting feedback to make improvements or take corrective action **The Benefits You Will Enjoy:** International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term Disability, 401(k) and/or Pension (where applicable), Paid Time Off, Education & Development (including Tuition Reimbursement), and Voluntary Benefits including insurance for home, auto, vision and pets. **The Career You Will Build:** Our training and certification program will provide many opportunities to develop new skills for advancement. Future opportunities may include: + Becoming a skilled trainer for future new employees + Becoming a safety advocate and leader + Leadership Development training to allow for potential growth into supervisory roles **The Impact You Will Make:** We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're **Proud to be IP** . **The Culture You Will Experience:** International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. **The Company You Will Join:** International Paper (NYSE: IP) is the global leader in sustainable packaging solutions. With company headquarters in Memphis, Tennessee, USA, and EMEA (Europe, Middle East and Africa) headquarters in London, UK, we employ more than 65,000 team members and serve customers around the world with operations in more than 30 countries. Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time. Net sales for 2024 were $18.6 billion. In 2025, International Paper acquired DS Smith creating an industry leader focused on the attractive and growing North American and EMEA regions. Additional information can be found by visiting internationalpaper.com **_International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law._** **About Us** **The Benefits You Will Enjoy:** International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term and Long-term Disability, 401(k), Company-funded retirement contributions, Paid Time Off, Education & Development (including Tuition Reimbursement), Student Loan Repayment Assistance, and Voluntary Benefits including insurance for home, auto, vision and pets **The Career You Will Build:** Leadership training, promotional opportunities **The Impact You Will Make:** We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're Proud to be IP. **The Culture You Will Experience:** International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. **The Company You Will Join:** International Paper (NYSE: IP) is the global leader in sustainable packaging solutions. With company headquarters in Memphis, Tennessee, USA, and EMEA (Europe, Middle East and Africa) headquarters in London, UK, we employ more than 65,000 team members and serve customers around the world with operations in more than 30 countries. Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time. Net sales for 2024 were $18.6 billion. In 2025, International Paper acquired DS Smith creating an industry leader focused on the attractive and growing North American and EMEA regions. Additional information can be found by visiting internationalpaper.com. International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or **************. **Job Identification** 2000591 **Job Category** Production/Facility **Job Schedule** Full time

This role is based in Eastern Iowa and focuses on PLC and HVAC automation support. The Automation Technician will be responsible for troubleshooting and commissioning PLC-based control systems, encompassing wiring, sensors, and BACnet networks. Key tasks include diagnosing HVAC issues, modifying control programs, and creating system dashboards. The position requires strong PLC troubleshooting skills, field experience, and the ability to work independently on construction sites. The company values integrity, safety, and technical excellence. Responsibilities + Troubleshoot and commission PLC-based control systems. + Diagnose HVAC issues and modify control programs. + Create system dashboards and design automation system graphics. + Commission microprocessor-based controls, including DDC controllers, sensors, actuators, and transducers. + Verify wiring for grounding, polarity, communication, and power. + Calibrate input/output devices such as temperature sensors and pressure transducers. + Upload, download, and modify control programs. + Configure BACnet networks, including IP, subnet, MAC, and instance numbers. + Troubleshoot PLC systems and diagnose control logic issues. + Modify and debug ladder logic, structured text, and function block programming. + Map control points to supervisory controllers, add alarms, and history. + Link control points to graphics and dashboards. Essential Skills + 3-5 years of experience in troubleshooting electrical systems and sensors. + Strong PLC troubleshooting skills. + Experience with microprocessor-based controls. + Ability to work independently on construction sites. + Associate's degree in Electronics, Technology, or Automation. Additional Skills & Qualifications + Ability to work autonomously. + Experience with Microsoft Products. + Familiarity with Microsoft SQL or other database applications. Work Environment The work environment involves a mix of office settings and fieldwork. Expect extended periods of desk work with computer-based tasks. There are frequent visits to local construction job sites with significant client interaction, requiring 30-50% travel (anticipated to be under 20% with several months' notice). The company has a strong family-like culture, emphasizing integrity, collaboration, and growth opportunities. As one of Iowa's Top Workplaces for nine consecutive years, the organization offers a competitive benefits package, including an Employee Stock Ownership Plan (ESOP), two retirement plans, and relocation incentives for Eastern Iowa. The company is fast-growing, offering ample growth opportunities and a reputation for safety, scheduling excellence, and strong relationships in the local market, including data center and industrial projects. Job Type & Location This is a Permanent position based out of Cedar Rapids, IA. Pay and Benefits The pay range for this position is $72000.00 - $90000.00/yr. - ESOP - 401K through Principal - Medical/Dental/Vision - FSA - HSA - Employee Assistance Program - PTO starting at 3 weeks + 7 holidays Workplace Type This is a fully onsite position in Cedar Rapids,IA. Application Deadline This position is anticipated to close on Jan 21, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here. ********************************************************************************************** **Security Clearance:** None/Not Required We are currently searching for an Aircraft Electrical Technician to join our Aircraft Certification Center (ACC) team located at the Eastern Iowa airport in Cedar Rapids. This individual will apply principles and theories of electrical engineering to design, build, modify, and repair electrical test installation, aircraft and aircraft applications for Collins Aerospace products in support of the ACC Engineering Installation and Design group. This is an onsite position based at the Eastern Iowa Airport located in Cedar Rapids, Iowa. **What you will do:** + Read and interpret wiring drawings and technical schematics for cable and harness builds. + Route electrical wire in testing and aircraft applications. + Set up and operation of standard equipment, and under minimal supervision. + Troubleshooting wire harness and avionics applications and installations. + Perform as member of team including utilizing effective communication skills and interacts with leadership and customers. + Expert understanding of written/verbal instruction methods used by customers. + Performs independently on routine technician assignments and general instruction is provided for new/special assignments. + May participate in various phases of engineering design effort. **Qualifications you must have:** + Typically requires HS Diploma or AA/AS degree (or other 2-year post high school training) with a minimum of 2 years of relevant experience + **U.S. Person is required** - Job requires access to ITAR or 600/500-series EAR information or hardware (directly or indirectly) and the company will not seek an export authorization for this role. + Basic electrical knowledge including crimping, soldering, wire terminating, and interpreting wiring diagrams is required. **Qualifications we prefer:** + Familiarity with design and materials quoting for projects + Aircraft wiring experience + Familiarity designing and wiring test equipment and test setups + Aircraft repairman's certificate + Familiarity working around aircraft or building aircraft parts + Fiber optic experience _Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market._ **What we offer:** **BENEFITS:** + Medical, dental, and vision insurance + Three weeks of vacation for newly hired employees + Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option + Tuition reimbursement program + Student Loan Repayment Program + Life insurance and disability coverage + Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection + Birth, adoption, parental leave benefits + Ovia Health, fertility, and family planning + Adoption Assistance + Autism Benefit + Employee Assistance Plan, including up to 10 free counseling sessions + Healthy You Incentives, wellness rewards program + Doctor on Demand, virtual doctor visits + Bright Horizons, child and elder care services + Teladoc Medical Experts, second opinion program + And more! **Learn More & Apply Now!** _Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today._ **Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. _Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings._ At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 41,400 USD - 72,600 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Control System Technician - Cedar Rapids, IA - Large Controls Company Control System Technician RESPONSIBILITIES: Well versed in troubleshooting controls BAS systems Knowledge of controls programming and experience rewriting sequences Fundamental understanding installing and testing building automation systems Strong understanding of commissioning protocols and point to point check outs Work closely with controls installations and start up/termination of equipment and programs Troubleshoot and manipulate current installed BAS programs Communicate efficiently with building owners as well as end users, and general contractors Ability to work in a team environment COMPANY INFO: Founded in over 15 years ago. Clients include: Healthcare, Commercial, Education, Construction Service, design-build/new construction. Work/Services: Building Automation, Hardware, Sensors, Energy Reporting, Integrations OFFERED Competitive Compensation 401K with Match Excellent Benefits: Medical, Dental, Vision Company Vehicle Laptop, Cellphone, Vehicle, Gas Card Vacation & Holiday

Department Construction/CEI Employment Type Full Time Location Cedar Rapids, IA Workplace type Onsite Compensation $25.00 - $38.00 / hour Equal Opportunity Employer About Fehr Graham Fehr Graham is a premier provider of engineering, environmental and funding solutions for commercial, industrial, institutional and government clients with Midwest office locations in Illinois, Iowa and Wisconsin. Fehr Graham is an Engineering News-Record Top 500 Design Firm and Zweig Group Hot Firm. For more information, visit fehrgraham.com.

Troubleshoot, test, and inspect electrical apparatus. Perform as “lead” person on projects. Perform other assignments as required. Position requires some technical supervision. RESPONSIBILITIES Perform all aspects of testing and maintenance of electrical power distribution systems. Troubleshooting capabilities, simple relay calibration, use of load recording instrumentation, low and medium voltage switchgear testing through 15 kV class. Test and troubleshoot moderately complex electrical systems, simple relay systems and power metering. May perform simple power system studies including short circuit and protective device coordination. Write complete, detailed reports promptly at end of project using a computer, and accurately process job billing. May perform complex analysis and evaluative tasks necessary to complete equipment labeling projects consistent with recognized industry and international standards, local jurisdiction requirements and Company procedures. Take an active role in business development and expansion. Perform all functions pertaining to a written job proposal to a client, including estimate of man-hours and expenses, and development of scope and pricing and accurate when judged over time; sought out by others for advice and solutions. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL REQUIREMENTS Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. Frequently required to sit, climb, and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. Regularly lift and/or move up to 25 pounds, and frequently lift and/or move 100-pound test sets. Valid Driver's License. TRAVEL TIME REQUIRED 50%, EDUCATION/EXPERIENCE Graduate Engineer BSEE or BSME and no experience. OR Graduate of applicable Electrical Technical School or Military equivalent and three years minimum same or similar work experience. OR High school education or equivalent and four years minimum same or similar work experience. Knowledge of the National Electrical Code and various industry standards, such as OSHA and NFPA. Passed NETA (National Electrical Testing Association) exam. Strong background and experience in all types of switchgear testing through the 15 kV class. Good theoretical understanding of electrical power systems. Communicate effectively, in writing and verbally, with clients and peers. Good judgment, dependable, supervises projects with technical expertise and good business management skills. Strong computer skills including editing, formatting, and using templates in Microsoft Word, use of Internet for standards/products/manufacturer research, and operation of computer-controlled test equipment. Willing to work flexible hours, weekends, holidays, and night work. Must be available for out of-town and international travel of up to several weeks. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #ERS #LI-HR1

Davenport, Iowa 1st Shift: 7a-3:30pm (OT Required during startup) 2nd Shift: 3p-11:30p (OT Required during startup) Pay: $40/hr IMMEDIATE START! Ready for your next long-term career move? Advance Services is hiring an Automation Technician who isn't afraid of hard work and takes pride in keeping equipment running safely and effectively. This position plays a key role in supporting production and maintaining automated systems. Experience or training in Automation Technology is preferred-apply today to start the conversation! Responsibilities: -Monitor, troubleshoot, and adjust automated systems, PLC-controlled equipment, and machine settings -Use HMI screens to diagnose faults, adjust setpoints, and restore equipment to normal operation -Perform minor PLC logic edits and parameter changes (no full program development required) -Perform I/O checks and verify sensor, actuator, and device functionality during maintenance Requirements: High school diploma or equivalent required; technical certification in automation, mechatronics, industrial electronics, robotics, or related field preferred Working knowledge of PLC/HMI systems (Allen Bradley or similar) including interpreting ladder logic and performing basic edits Experience using multimeters, basic electrical tools, and diagnostic equipment. CMMS experience preferred Ability to read electrical schematics, ladder diagrams, and equipment manuals Must be able read written instruction in English Must be able to lift up to 55lbs Must be able to pass a 10 panel Drug Screen Must be able to pass a Nationwide Background Check Why work for Advance Services, Inc. · Advance Services is for and about people; we are your employment specialists. · Enjoy our easy application process. · You NEVER pay a fee! · Weekly pay. · Fun Safety and attendance incentives. · Health Benefits to keep you and your family healthy. · PTO so you have time for you. · Great Referral Incentives. · Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website. Please select a branch near you or call our office at ************** Stop in and see our experienced friendly staff at 1210 S Gilbert St #103 Iowa City, Iowa Advance Services is an equal opportunity employer #449 #automationtechnician #Industrial Automation #PLC #HMI #SCADA #Pneumatics #Hydraulics #Robotics #CMMS #ladderdiagrams

The Automation Technician, 2nd Shift, assists production by ensuring automated equipment operates safely, efficiently, and reliably. This role emphasizes real-time troubleshooting, PLC (Programmable Logic Controller) interface adjustments, fine-tuning machine performance during operation, and supporting both Controls Engineering and Maintenance teams with automation-related tasks. The Automation Technician will report to the Maintenance Manager. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. * Monitor, troubleshoot, and adjust automated systems, PLC-controlled equipment, and machine settings during production to maintain optimal performance. * Perform minor PLC logic edits and parameter changes (no full program development required). * Use HMI screens to diagnose faults, adjust setpoints, and restore equipment to normal operation. * Collaborate closely with Controls Engineering to escalate complex program or electrical design issues. * Support Maintenance Technicians in diagnosing root causes of intermittent electrical, minor mechanical, and pneumatic automation failures. * Conduct equipment start-up checks and assist with commissioning updates after repairs or changeovers. * Maintain and update basic documentation, including parameter sheets, machine settings, and troubleshooting guides. * Perform I/O checks and verify sensor, actuator, and device functionality during maintenance or troubleshooting activities. * Assist with integrating new automation components (sensors, drives, vision devices, and safety devices). * Perform minor wiring repairs, cable routing, and component replacements under supervision from Controls Engineering or per established procedures. * Participate in continuous improvement efforts to increase uptime, reduce scrap, and improve cycle performance. * Maintain strong communication with Operations, Maintenance, and Engineering teams regarding equipment status, corrective actions, and improvement opportunities. * Ensure adherence to all safety requirements, including LOTO (Lockout/Tagout), machine guarding, PPE, and safe electrical practices, consistent with training and certification levels. * Participate in all TVS SCS quality and excellence initiatives. Competencies * Technical Troubleshooting * Mechanical & Electrical Aptitude * PLC/HMI Understanding * Critical Thinking & Root Cause Analysis * Communication & Collaboration * Attention to Detail * Safety Awareness * Adaptability in Fast-Paced Production Education and Experience * High school diploma or equivalent required; technical certification in automation, mechatronics, industrial electronics, robotics, or related field preferred. * 2+ years of experience supporting automated production equipment in a manufacturing environment. * Working knowledge of PLC/HMI systems (Allen Bradley or similar), including interpreting ladder logic and performing basic edits. * Understanding of electrical, pneumatic, and mechanical systems as they relate to automated equipment. * Experience using multimeters, basic electrical tools, and diagnostic equipment. * Familiarity with industrial sensors, actuators, VFDs, and servo systems. * Ability to read electrical schematics, ladder diagrams, and equipment manuals. * CMMS (Computerized Maintenance Management System) experience preferred. * Hands-on experience in a manufacturing environment, including tire and wheel operations, is strongly preferred. Travel Local travel between facilities may be required. Physical Demands The physical demands described here are representative of those that an employee must meet to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand, walk, reach, and use hands for handling tools or components. The employee may occasionally be required to kneel, climb, or work in confined spaces. The employee may need to lift up to 51 pounds; assistance is required for anything above that weight. Vision requirements include close vision, distance vision, color vision, depth perception, and the ability to adjust focus. Work Environment This job is performed within a manufacturing and warehouse environment, with seasonal temperatures, machinery noise, and regular exposure to forklift and industrial equipment traffic. Steel-toed shoes with metatarsal protection and standard PPE are required. Position Type/Expected Hours of Work Full-Time, Non-Exempt. Flexibility for overtime, extended hours, weekends, and on-call support is required based on production needs. 2nd Shift Hours: 3:00 PM - 11:30 PM CST Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. TVS SCS NA is committed to cultivating a diverse and inclusive culture as an EEO employer. The TVS SCS NA team does not discriminate against candidates and employees because of their disability, sex, race, gender identity, sexual orientation, religion, national origin, age, veteran status, or any other protected status under the law within any employment practices. We are pleased to provide reasonable accommodations to applicants; please contact [Hope Molyneaux, *********************] to request a reasonable accommodation. The employee selected for this role must be able to perform the position's essential functions satisfactorily. If requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. TVS SCS NA complies with the CPRA: CALIFORNIA PRIVACY NOTICE **************************************************************************************************

Do you want to work for a company where you can build a strong career, never be bored, never stand in one place, while learning something new and interesting? Zero Zone is looking for candidates who enjoy working with their hands, have a strong mechanical aptitude and desire a great job experience at a custom shop with plenty of opportunities. Who Are We? Have you ever gone into a grocery store or convenience store for things like milk, bagged salads, or frozen pizza? The coolers and freezers you find those and other food products in are what we do!! Zero Zone is a manufacturer of reach-in and open refrigerated and frozen food display cases as well as the refrigeration systems that work behind the scenes to cool the cases, keeping the food fresh! We also make powerful industrial refrigeration systems for food warehousing, pharmaceuticals, and even ice rinks! Our company is structured across 2 divisions - the Display Case Division, located in North Prairie, WI, Waukesha, WI, and Mukwonago, WI and the Refrigeration Systems Division, located in Ramsey, MN and Dyersville, IA. What Are We Like? At Zero Zone, you will be a valued member of the Zero Zone team, able to take ownership of your own career path. We believe in hard work, teamwork, collaboration, and respect, and we have grown through dedication to our Purpose: "Preserving customer valuables through refrigeration." For over 60 years, we have been a leader in refrigeration, and our people are well known for exceptional customer service. We also believe we are the COOLEST coworkers (pun intended)! This is an opportunity for you to make a difference in the refrigeration industry with one of the top leading manufacturers in the country! Come grow with us!! What Can We Offer You? * Vacation and Personal Hours (after only 30 days!) * Competitive Wages * Comprehensive Benefits Package (medical, dental, vision, life insurance, STD, LTD, AD&D, HSA/FSA, EAP) * 401k and Profit Sharing * Paid Holidays * Flexible Schedules * Casual Dress Code * Wellness Programs and Incentives * Steel Toe Reimbursement * Employee Engagement Programs * One-time Home Computer Reimbursement * And more! What Will You Do? The Electrical Technicians are individuals with high mechanical aptitude, who are comfortable using hand/power tools and willing to learn and take directions. Our products are built utilizing an assortment of documents to assemble and construct manufactured commercial and industrial refrigeration products in our production environment. This is a hands-on, in-person position at our Dyersville, IA location that requires engaged employees who are willing to learn and take direction. You will receive day-to-day job training, guidance, and direction from qualified personnel to perform the following essential duties and responsibilities: * Assist with the electrical layout per design documentation and wiring schematics on assigned projects * Determine mounting of major components for the electrical system including rack controllers, transformers, auxiliary panels, variable frequency drives, etc. * Wire pressure switches, solenoid valves, compressors, and other auxiliary devices. * Perform periodic audits throughout electrical production processes to ensure standards are maintained * Assist workers engaged in inspecting and testing activities to ensure continuous control over raw materials and finished products. * Assist in analyzing and resolving work problems related to product design layout. * Maintain a positive work environment and reinforce the team approach with co-workers. * Interact professionally with all departments, vendors, and customers for the betterment of Zero Zone. What Are We Looking For? The requirements listed below are representative of the knowledge, skill, and/or ability required of you for this position: * Minimum of high school diploma or GED is required. * Prompt and regular attendance is an essential function of the job. * Previous manufacturing experience is helpful but not required as we conduct daily onsite training. * Experience with hand tools, and measuring tools is required. * Additional attributes needed are detail and quality oriented, dependable, and self-motivated, which could lead to cross training and growth opportunities. * Employee must regularly stand, walk, reach, stoop, lift, climb or balance, kneel, crouch, or crawl, and must regularly lift and/or move up to 25 lbs., frequently lift and/or move up to 45 lbs. Specific vision abilities required include distance vision, close vision, peripheral vision, & depth perception.

This position with assist with the engineering, designing, project development, repairing, and optimizing of Building Automation Systems and HVACR systems in a complex workspace consisting of Dormitories and Dining Locations. For a detailed job description, please email Rebecca Hoag at **********************. About the Division of Student Life: The Division of Student Life is comprised of staff that embrace new ideas and thoughts, works together to keep our students safe, and provides them with life-changing experiences. The Division of Student Life includes 15 departments that span from Recreation Services to the Office of Leadership, Service and Civic Engagement and everything in between. We believe in working together as one team to achieve our mission: fostering student success by creating and promoting educationally purposeful services and activities within and beyond the classroom. Required Qualifications: Two years post high school education in a related technical field including carpentry, plumbing, electrical, and/or heating, ventilating, and air conditioning, and Three years related experience, which includes regular participation in activities such as project planning, designing, ensuring code compliance, estimating project costs, investigating problems, recommending actions or similar tasks, or An equivalent combination of training and experience totaling five years. Special Qualification: Universal refrigeration certification Desirable Qualifications: Experience in University or larger commercial setting Application Details: Job openings are posted for a minimum of 10 calendar days and may be removed from posting and filled any time after the original posting period has ended. Successful candidates will be subject to a criminal background check. Up to 5 professional references will be requested at a later step in the recruitment process. For questions or additional information, please contact **********************. Successful candidates will be required to self-disclose any conviction history and will be subject to a criminal background check and credential/education verification. Up to 5 professional references will be requested at a later step in the recruitment process. For additional questions, please contact **********************. Joining the University of Iowa means becoming a vital part of the Hawkeye community, where your work directly impacts education, research, and student success. Enjoy exceptional health coverage, university-paid life insurance, robust retirement plans, and generous leave policies. Benefit from 24/7 support services, well-being resources, and access to UI Health Care specialists. Grow professionally with advanced training, leadership development, and tuition assistance. Iowa City offers a great quality of life with world-class performances at Hancher Auditorium, Big Ten athletics, top-ranked public schools, and outdoor recreation. Join us in making a difference at a leading Big Ten university and premier public research institution. Additional Information Compensation Contact Information

Req No. 2025-5455 Category Technicians Type Regular Full-Time Union or Non-Union Non-Union Division Lift Truck Company Altorfer Inc Working Hours/Days 7:00 AM - 4:00 PM Monday- Friday, some Saturdays and overtime as needed. Perform maintenance, diagnosis, and repairs in the field, on customer owned or Altorfer rental lift trucks/forklifts, Caterpillar, and other allied type construction equip Ament. Location areas to be serviced are: Cedar Rapids, IA., Cedar Falls, IA. and Dubuque, IA. Basic Duties Provide exceptional service to our customers by performing maintenance, diagnosis, and repairs on allied type construction and lift truck equipment. Assist in the decision if equipment needs to be transported into the shop to complete repairs. Establish and maintain service-oriented working relationship with customers. Plan and execute the repair of various pieces of rental equipment. Provide excellent customer service to all customers. Complete service reports and all other paperwork before and after repairs are made May perform other related duties as requested and/or assigned. Keep current with industry standards. Qualifications Successful completion of a formal technical training program preferred or a minimum of 2 years of previous related work experience required. Previous experience working on electric, diesel engines, hydraulic systems, fuel systems, drivetrain, brake systems, etc. and possess troubleshooting skills. Automotive and Industrial Maintenance Technicians encouraged to apply. Computer literate and proficient with programs such as Microsoft Word, Excel, Access and Outlook required. Knowledge of Cat software preferred. Must take initiative, be team oriented and willing to adapt to change. Ability to write professional business communication when sending emails, letters, notes, and documenting is required. Must be a self-starter, well organized and able to work in a fast-paced environment. Ability to follow all safety rules and wear proper safety equipment. Excellent customer service skills are needed. Must be able to safely lift 75 lbs, bend, twist, and climb. Must possess a valid driver's license with clean driving record. This includes no more than 2 minor violations within the past 3 years and no major violations within the past 5 years (Motor Vehicle Report will be performed on final candidate). Physical Requirements/Working Conditions This position will work in the field/shop environment and at Customer jobsites. May on a continuous basis carry, bend and lift; up to 75 lbs. Will be required to wear appropriate safety equipment (IE- steel toed boots, hard hat, safety glasses with side shields, hearing protection, cut resistant gloves, etc.) for a given situation. The noise level in the work environment is usually moderate to high. Must be flexible to work varying schedules and hours as needed. Travel between locations is required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran . Why Work for Altorfer? At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is crucial to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with. Need help finding the right job? We can recommend jobs specifically for you! Click here to get started.

**Employee Type:** Full time **Job Type:** Production Maintenance **Job Posting Title:** Electronic Technician **About Us:** TreeHouse Foods (NYSE: THS) is a leading manufacturer of private label packaged foods and beverages, operating a network of over 20 production facilities and several corporate offices across the United States and Canada. At TreeHouse Foods, our commitment to excellence extends beyond our products and revolves around our people. We are investing in talent and creating a performance-based culture where employees can do their best work and develop their careers, directly impacting our mission to make high quality, affordable food for our customers, communities, and families. We hope you will consider joining the team and being part of our future. Named one of America's Best Large Employers by Forbes Magazine, we are proud to live by a strong set of values and strive to "Engage and Delight - One Customer at a Time." Guided by our values- **Own It, Commit to Excellence, Be Agile, Speak Up, and Better Together.** We are a diverse team driven by integrity, accountability, and a commitment to exceptional results. We embrace change, prioritize continuous learning, and foster collaboration, transparency, and healthy debate. Together, we set each other up for success to achieve enterprise-wide goals. **What You Gain:** + Competitive compensation and benefits program! + Enrollment in our wellness and employee assistance programs! Paid holidays, vacation, and other competitive paid time off opportunities! + An inclusive working environment where you can build meaningful work relationships with a diverse group of people + Leaders who are invested in supporting your career growth. + Opportunities to be recognized for outstanding contributions to your team through our employee recognition programs. **Job Description:** **About the Role:** **The Electronic Technician role at the Cedar Rapids location provides support to the Production team, driving and supporting key initiatives to improve performance throughout the plant. You'll add value to this role by performing various functions including, but not limited to:** + **Complete assigned planned electronic/maintenance on time.** + **Complete tasks from work orders assigned in time allotted.** + **Ensure assigned spaces are kept in a clean and free of clutter.** + **Work closely with the production supervisor on production needs.** + **Comply with the requirements defined within the contents of the GMP'S, Hazard Analysis Critical Control Points (HACCP), LO/TO procedures, and Food Safety programs with the Confined Space Entry** **Important Details: This is a full-time permanent role on Afternoon shift, which operates from 3:00p to 11:00p Mon-Fri. schedule. This role pays $36.40/hour + shift differential.** **$3,000 Sign on Bonus: Paid after 60 working day probationary period (will need to be paid back if leave prior to 6 months continuous service).** **About You:** **You'll fit right in if you have:** + **Demonstrated experience in electronics and maintenance applications along with following work instructions** + **Experience in a manufacturing environment - food manufacturing a plus** + **The ability to work overtime and weekends** **TreeHouse Use Only: #IND1** **Your TreeHouse Foods Career is Just a Click Away!** Click on the "Apply" button or go directly to ****************************** to let us know you're ready to join our team! _At TreeHouse Foods, we embrace diversity and inclusion for innovation and growth. We are committed to building inclusive teams and an equitable workplace for our employees to bring their true selves to work to help us "Engage and Delight - One Customer at a Time"._ _TreeHouse Foods is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact_ _disability-accommodations@treehousefoods.com_ TreeHouse Use Only: #IND1 TreeHouse Foods is a private label food and beverage leader focused on customer brands and custom products. When customers partner with TreeHouse they can expect access to an industry-leading portfolio, strategic vision, on-trend innovation and insights, world-class supply chain, operational excellence and flexibility, collaborative approaches, and dedicated customer service. Our strategy is to be the leading supplier of private label food and beverage products by providing the best balance of quality and cost to our customers. We engage with retail grocery, food away from home, and industrial and export customers, including most of the leading grocery retailers and foodservice operators in the United States and Canada. Our portfolio includes a variety of shelf-stable, refrigerated, and snack products. Customers can expect comprehensive flavor profiles including natural, organic, and preservative-free ingredients in many categories and packaging formats. TreeHouse Foods is best known for food and beverages produced by our two largest businesses Bay Valley Foods, LLC (including E.D. Smith and Sturm Foods) and TreeHouse Private Brands. With more than 10,000 employees in over 26 plants across the United States and Canada, TreeHouse Foods is based in Oak Brook, Illinois. **Recruitment Fraud Alert** We want to ensure your career journey with TreeHouse Foods is safe and secure. Scammers may attempt to impersonate our company by sending fake job offers, interview, and sensitive document requests. If you receive an email claiming to be from us, always verify the sender's email address-it should match our official company domain (@treehousefoods.com) exactly. We will _never_ ask for payment, financial, or personal information and documents as part of our interview process. If you suspect fraudulent activity, please contact us directly by visiting the Contact page on our website (****************************************************** . Stay vigilant to protect yourself from recruitment scams. **Disability Assistance and EEO Considerations:** At TreeHouse Foods, we embrace diversity and inclusion for innovation and growth. We are committed to building inclusive teams and an equitable workplace for our employees to bring their true selves to work to help us "Engage and Delight - One Customer at a Time." TreeHouse Foods is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact disability-accommodations@treehousefoods.com **To all recruitment agencies:** TreeHouse Foods does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Treehouse Foods employees, or any company location(s). TreeHouse Foods is not responsible for any fees related to unsolicited resumes/CVs.

Electrical/Instrumentation Technician Pay Rate: $37.25/hr. Opportunity to get to $48+ Physical Location: Cedar River Mill 4600 C St SW Cedar Rapids, IA 52404 ************ Category/Shift: Hourly Full-Time Days (6am-4:00pm - Monday-Thursday/Tuesday-Friday (rotating 4-day weekends off)) May cover rotating shift hours periodically (12hr Dupont Schedule) Job Requirements At least 18 years of age Minimum high school graduate, GED, or equivalent work experience Eligible for employment in the US AND the following: At least three (3) years of work experience in INSTRUMENTATION AND ELECTRICAL systems Must be willing to meet the following requirements: Work in industrial conditions (may be warm/hot, dusty/dirty, around hazardous chemicals, noise, heavy machinery, elevated working surfaces, and confined spaces (with proper safety training and safety protection) Undergo technical online testing, interview, and a formal hands-on assessment of skills Undergo a drug screen for illicit use of drugs as a condition of employment Undergo a job-related health assessment as a condition of employment Submit to periodic drug screens as a condition of employment Work any shift and/or a rotating shift schedule Work overtime on a regular basis and with last minute notification Work holidays and/or weekends on a regular basis Wear required safety equipment It is preferred that candidates have the following skills and/or experience(s): Associates degree and/or certification(s) in Industrial Maintenance or other related disciplines within instrumentation/electrical. At least five (5) years of work experience in INSTRUMENTATION AND ELECTRICAL systems Relevant work experience in an industrial environment. The Job You Will Perform: This position will work alongside journeymen-level Electrical/Instrumentation maintenance technicians in routine maintenance work as well as performing many duties independently. Our world class Global Manufacturing Training program provides paid hands-on experiences and classroom instruction in order to prepare you for your next promotion Duties include, but are not limited to: Instrumentation: Troubleshoot, configure, maintain: PLC systems Single loop controls for various field systems • Instillation, calibration, troubleshooting various manufactures of analog and SMART instruments and analytical equipment • Shop and field repair of final control elements such as pneumatic valves, electric valves, solenoid operated valves, calibration of pneumatic and SMART valve positioners • Reading and interpreting electrical schematics • Routine and regulatory calibration of field instruments for boilers and environmental systems • Troubleshoot, maintain pneumatic and hydraulic systems • Read and redline loop sheets, P&IDs • Read and interpret wiring diagrams & electrical schematics • Understand and follow NFPA70E regulations involving Arc Flash and Shock hazards • Calibration and maintaining control instrumentation AND Electrician: • Troubleshoot, install, repair AC and DC drive systems as well as stand-alone process drives of various manufacturers • Troubleshoot, install, maintain various electrical components such as mechanical limit, proximity, photo electric, speed and reflective switches • Reading and interpreting electrical schematic • Perform repairs and preventive maintenance on 480v thru 13.8kv power distribution switchgear • Understand and follow NFPA70E regulations involving Arc Flash and Shock hazards The Skills You Will Bring: Critical Thinking - Analyze and use logic to address issues Team Player - Collaborate and work cooperatively across a multifunctional team Dependability - Being reliable, responsible, and dependable Self-Motivation - Exerting effort towards training to move up to next position and accepting feedback to make improvements or take corrective action The Benefits You Will Enjoy: International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term Disability, 401(k) and/or Pension (where applicable), Paid Time Off, Education & Development (including Tuition Reimbursement), and Voluntary Benefits including insurance for home, auto, vision and pets. The Career You Will Build: Our training and certification program will provide many opportunities to develop new skills for advancement. Future opportunities may include: Becoming a skilled trainer for future new employees Becoming a safety advocate and leader Leadership Development training to allow for potential growth into supervisory roles The Impact You Will Make: We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're Proud to be IP. The Culture You Will Experience: International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. The Company You Will Join: International Paper (NYSE: IP) is the global leader in sustainable packaging solutions. With company headquarters in Memphis, Tennessee, USA, and EMEA (Europe, Middle East and Africa) headquarters in London, UK, we employ more than 65,000 team members and serve customers around the world with operations in more than 30 countries. Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time. Net sales for 2024 were $18.6 billion. In 2025, International Paper acquired DS Smith creating an industry leader focused on the attractive and growing North American and EMEA regions. Additional information can be found by visiting internationalpaper.com International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job DescriptionDescription: Electrical Technician The Electrical Technician is responsible for installing, repairing, and maintaining electrical wiring systems, fixtures, and related components within telecommunications equipment shelters. This role works with both AC and DC systems, including low voltage, single-phase, and three-phase power, to ensure reliable and safe electrical infrastructure for telecom operations. The Electrical Technician follows the National Electrical Code (NEC), company specifications, and customer requirements, while maintaining a strong commitment to safety and quality workmanship. Duties/Responsibilities: Install and repair electrical wiring systems and fixtures in telecom equipment shelters, including: Low voltage (data, alarming, control, 12V to 48V DC systems), rectifiers, and battery systems. 120/240V single phase, 120/208V 3-phase, and 277/480V 3-phase systems. Troubleshoot and service issues with electrical panels and systems, including communications, digital/analog signal, DC power, and AC power up to 480V. Install conduits and raceways for electrical wires and cables, ensuring compliance with applicable electrical codes. Install equipment grounding systems per customer specifications. Test electrical systems to verify proper installation, operation, and safety compliance. Inspect electrical systems to determine repair or upgrade needs. Replace conduit, wiring, and circuit breakers as necessary. Work safely and cooperatively with co-workers, contractors, and the public. Maintain a clean, organized, and safe work environment. Install all electrical systems in compliance with NFPA 70 National Electrical Code and company specifications. Adhere to all company and industry safety standards. Perform other related duties as assigned. Required Skills/Abilities: Ability to read and interpret blueprints, schematics, and work orders. Extensive knowledge of electrical systems, wiring, and circuit construction. Ability to route and secure wiring in an organized and logical manner. Proficient in the use of hand tools and power tools. Skilled in pipe bending and installation (EMT, PVC, threaded rigid). Proficient in the use of test meters and diagnostic equipment. Strong analytical and problem-solving skills. Ability to operate forklift, telehandler, and aerial lift. Strong interpersonal skills and ability to work effectively as part of a team. Proficiency with Microsoft applications and smartphones/tablets for timekeeping, email, and documentation. Education and Experience: High school diploma or equivalent required Relevant electrical experience required Apprentice or Journeyman Electrician preferred Physical Requirements: Ability to see color for identifying color-coded wiring. Prolonged periods standing, kneeling, bending, and climbing ladders or scaffolding. Physical capability to pull wires and cables through conduits. Must be able to lift 50 pounds at a time. Benefits: Health, Dental and Vision Insurance Company-paid $50K Life Insurance, short-term disability, and Long-term Disability Insurance 401k with up to 4% Company Match Paid Maternity/Paternity Leave 9 Paid Holidays Paid Time Off (PTO) Corporate rate gym membership Per diem when traveling Employee Assistance Program (EAP) This role is full-time and presents an opportunity to work in a fast-growing industry, leveraging your expertise to make a significant impact on company growth and success. CellSite Solutions, LLC is committed to being an Equal Opportunity Employer. Recognizing the value of diversity and inclusion, we actively strive to build a team reflecting individuals from a wide range of backgrounds and experiences. We welcome applications from all races, religions, national origins, genders, and age groups, as well as veterans and persons with disabilities. As part of our commitment to maintaining a safe, drug-free workplace, pre-employment and random drug screenings are routinely conducted. Please note that employment for this position is contingent upon successful completion of standard background checks. Adherence to general construction, industry, and specific company safety policies is required. Requirements:

Troubleshoot, test, and inspect electrical apparatus. Perform as "lead" person on projects. Perform other assignments as required. Position requires some technical supervision. RESPONSIBILITIES * Perform all aspects of testing and maintenance of electrical power distribution systems. * Troubleshooting capabilities, simple relay calibration, use of load recording instrumentation, low and medium voltage switchgear testing through 15 kV class. * Test and troubleshoot moderately complex electrical systems, simple relay systems and power metering. * May perform simple power system studies including short circuit and protective device coordination. * Write complete, detailed reports promptly at end of project using a computer, and accurately process job billing. * May perform complex analysis and evaluative tasks necessary to complete equipment labeling projects consistent with recognized industry and international standards, local jurisdiction requirements and Company procedures. * Take an active role in business development and expansion. * Perform all functions pertaining to a written job proposal to a client, including estimate of man-hours and expenses, and development of scope and pricing and accurate when judged over time; sought out by others for advice and solutions. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL REQUIREMENTS * Regularly required to stand, walk, use hands and fingers, handle or feel objects, tools or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; talk, hear, and smell. * Frequently required to sit, climb, and balance. Specific vision abilities required by this job include close vision, distance vision, basic color differentiation and the ability to adjust focus. * Regularly lift and/or move up to 25 pounds, and frequently lift and/or move 100-pound test sets. * Valid Driver's License. TRAVEL TIME REQUIRED * 50%, EDUCATION/EXPERIENCE * Graduate Engineer BSEE or BSME and no experience. OR Graduate of applicable * Electrical Technical School or Military equivalent and three years minimum same or similar * work experience. OR High school education or equivalent and four years minimum same * or similar work experience. * Knowledge of the National Electrical Code and various industry standards, such as OSHA and NFPA. * Passed NETA (National Electrical Testing Association) exam. * Strong background and experience in all types of switchgear testing through the 15 kV class. * Good theoretical understanding of electrical power systems. * Communicate effectively, in writing and verbally, with clients and peers. * Good judgment, dependable, supervises projects with technical expertise and good business management skills. * Strong computer skills including editing, formatting, and using templates in Microsoft Word, use of Internet for standards/products/manufacturer research, and operation of computer-controlled test equipment. * Willing to work flexible hours, weekends, holidays, and night work. Must be available for out of-town and international travel of up to several weeks. The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES * Customer Focus * Operational Excellence * High-Performance Culture * Innovation * Financial Strength OUR BEHAVIORS * Own It * Act With Urgency * Foster a Customer-First Mindset * Think Big and Execute * Lead by Example * Drive Continuous Improvement * Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to **********************. If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #ERS #LI-HR1

Are you eager to work on diverse construction and engineering projects? Fehr Graham is a fast-growing Midwest engineering and environmental firm looking for a motivated Associate Engineering Technician eager to tackle a wide range of projects. If you're hungry for knowledge, ready to make a difference and dedicated to providing personalized attention to our clients, we want you on our team. What's in it for you? We offer an exciting and engaging work environment where every day brings challenges and opportunities. As one of our engineering technicians, you'll have the chance to grow professionally and make a real impact on the communities where our clients live and work. We take pride in delivering exceptional service and building trust with our clients. We believe in the power of talented professionals who bring passion to their craft. Where you'll work The position is based in our Cedar Rapids, Iowa, office. At Fehr Graham, we believe in work-life balance, and that includes injecting a healthy dose of fun into everything we do. It's even part of our Core Values! We celebrate milestones and enjoy friendly team-building activities and office outings after work. A happy and engaged work team is a successful one. Each of our offices brings an environment filled with positive energy and enthusiasm. We encourage our teams to connect on multiple levels and support each other's personal and professional growth. GO BEYOND THE JOB AD: Uncover projects that ignite your passion. Civil Engineering - Fehr Graham. What you'll do As an Associate Engineering Technician, you will support the engineering functions of the firm by taking field measurements, observing construction, and helping in the field and the office. You will also: * Understand and interpret drawings, plans and specifications. * Observe construction and document work in the field. * Keep daily records of quantities and activities. * Verify material specifications and project compliance. * Conduct field measurements for record drawings. * Use survey equipment, such as GPS, optical or laser level and hand tools. * Review drawings and specifications in the office. * Assist with copying, making plan sets, filing and maintaining the library. What it takes An associate degree in Construction Technology, Industrial Technology or Engineering Technology from a technical college or institution is required, but significant relevant experience in a similar industry or at a firm may offset this requirement. You should also: * Be a team player. * Maintain client confidentiality. * Be familiar with technical measurement, surveying, and reading and interpreting construction plans. * Work independently in the field with oversight. * Have authority to stop construction if contractors deviate from design, materials or methods. * Perform observation duties, including recording data, taking measurements, and verifying activities and quantities. * Speak and write well. * Communicate information to coworkers and contractors. What you'll get You'll have plenty of opportunities to grow professionally at our progressive firm, which started in 1973. Our people-first organization is focused on giving our employees the opportunity for growth. In addition to a competitive salary, we also offer: * Medical/life/disability insurance. * 401K profit-sharing plan. * Paid time off. * An awesome work environment. Learn more about Fehr Graham's people, culture and projects on our website. Equal Opportunity Employer Fehr Graham provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #LI-MH1