Fabricator jobs in Bloomfield, CT

Perform a variety of duties to set up and operate sheet metal fabrication equipment to perform stamping and forming operations on a variety of aluminum and steel gauges following standard practices and procedures. Essential Duties and Responsibilities: List what the person must perform the job to meet standards: * Sets up, maintains and operates various sheet metal fabricating machinery, including but not limited to a Punch Press and Louver * Performs various production duties from Work Orders, Part Prints, Standard Set- up Procedures, Quality and OJT manuals. * Utilizes and maintains calipers, rules, combination square, protractor, vernier, feeder gauges, hand tools, wrenches, micrometers, hex keys and other similar tools. * Inspect and prepare supplied products, reports defects/problems to supervision. * Removes and inspects finished products for compliance to specifications, reports defects to supervision and makes machine adjustments as directed. * Uses lift and/or platform trucks to move supplied and finished products to various plant locations. * Maintains required production, safety and other records and data. * Inspects and reports defective and unsafe machinery/parts to supervision. * Wears and maintains safety equipment and obeys safety rules, practices and procedures. * Maintains work area in a neat, orderly and safe manner. * Performs other similar or related duties as required or requested. The Residential Products Fabricator must possess the minimum knowledge/abilities as listed below: * High School graduate preferred. * Prior manufacturing experience a plus * Ability to read, write and follow both verbal and written instruction. * Familiarity with manufacturing machinery, hand and air tools and measuring instruments. * Ability to operate lift, hand, platform trucks and hoists. * Capability of lifting 50 pounds unassisted on a regular basis * Ability to lift between 50 & 100 pounds intermittently in a team lift situation. * Ability to do repetitive lifting, bending, reaching, twisting, stretching, pushing and pulling. * Previous experience with a Punch Press and/or Louver

For description, visit PDF: *********** amazonaws. com/zcom-media/sites/a0i0L00000VJ0SJQA1/media/mediamanager/Plastic_Fabricator_Job_Description_5-22-2024_updated. pdf

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: Perform core sheet metal work while providing direction and communications to other employees to ensure that the parts flow meets or exceeds the customer requirements. Location: Manchester, CT This position is 100% onsite. Responsibilities: Operate all sheet metal equipment to perform completely and independently specific operations as outlined in the methods and process sheets. Lead, guide and direct department work flow and personnel as needed to meet customer schedule. Check parts using specified gages or check parts using furnished fixtures to see that dimensions are being maintained. Work requires extreme accuracy with very close tolerances and critical dimensions with working knowledge of geometric tolerances. Share knowledge willingly and mentor lower level employees Subject Matter Expert on all equipment in center Maintain a neat and orderly work area. Promote positive employee relations, promote and demand a safe work environment Adhere to all company policies and procedures and drive adherence to policy and procedure with direct staff Interact with business unit leaders, engineers, materials, quality control and assigned team members Train and communicate with employees and assist the shift supervisor in communications Lead 6Sigma and Lean manufacturing principles within the designated work cells. Specify and purchase standard and special cutting tools and raw material for each part. Train and communicate with employees and assist the shift supervisor in communications Provide regular performance feedback to assigned employees Provide input to performance reviews. Other job related duties as assigned Required Qualifications: High school diploma or equivalent 5 years relevant experience Sheet metal fabricator certification Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred Qualifications: 8+ years relevant experience CAD/CAM experience Possess solid mathematical skills Self starter, independent and able to lead others in a team environment Physical Requirements: This full section, or unrelated bullets, could be removed if not relevant. Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to frequently sit, stand and walk. Must be able to lift and carry up to 15 pounds. Compensation & Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The Sheet Metal Fabricator will be responsible for assembling sheet metal components to create parts and structures according to specifications. Job Duties and Responsibilities: * Measure, cut, bend and shape sheet metal using hand tools, power tools, and machines. * Set up and operate fabrication machinery. * Assemble fabricated components using welding, riveting, or fastening techniques. * Inspect finished products to ensure conformance to specifications. * Maintain a clean and organized work area. * Follow all safety guidelines and procedures. * Collaborate with team members and other departments to meet production goals. Basic Qualifications: * Valid CT Driver's License * OSHA 10 or 30 Certificate * High school diploma or GED required * Strong attention to detail and strong quality focus * Must clearly communicate in verbal and written form. Physical Demands Must be physically able to operate a variety of machinery and equipment. Must be able to use body members to work, move or carry objects or materials. This position requires: stooping, kneeling, crouching, climbing, crawling, reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, seeing, talking, hearing, and repetitive motions. Must be able to exert up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently. Work Environment This job operates in a collaborative environment, where employees work closely with both their department colleagues and field technicians. The work is conducted in the shop; may be exposed to noise, dust, and varying temperatures. Reasonable Accommodation Reasonable accommodation will be made to enable individuals with disabilities to perform the essential job functions unless doing so will present an undue hardship on the Company's business operations. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Welder All American Waste All American Waste All American Waste is at the forefront of waste hauling and processing, innovating at every step as we work to deliver the best solutions for safe, efficient residential and commercial services. From building the largest state-of-the-art recycling facility in the country to powering our buildings with solar energy and fueling our trucks with all-American natural gas, we are committed to you, our communities, and the planet. Our story started with a single truck. In 1974, founder Guy "Sonny" Antonacci and his wife, Mary Ann, started Somers Sanitation - named after our hometown of Somers, Connecticut. Today, three generations of family and a dedicated team of professionals are leading our companies into the future. While our fleet, facilities, services, and family have all grown, we take pride in continuing to operate our businesses based on the fundamental principle that has guided us since the beginning - to provide exceptional service and innovation to the communities and people we serve. Join a team committed to taking leaps forward to remain at the forefront of sustainability. Some see waste. We see possibilities. Position Summary: The Welder works in a fast-paced, results-oriented production environment and is responsible for reporting on a variety of items, including garbage, recycling, yard waste containers, vehicle assemblies, and facilities components. This position schedule is Sunday-Thursday, 6:00 pm-4:00 am. Your Role: Repairs, modifies, or fabricates a variety of metal w,ork including waste containers, vehicle assemblies, and facility components. Cuts, fits, and welds using gas and electric equipment. Performs skilled brazing and soldering. Uses a variety of machines and equipment in and out of repair areas. May operate heavy equipment as needed. Take an active role in the improvement of safety and health in the workplace. Participate in all required Company meetings, including weekly safety meetings. Maintains reasonable, regular, punctual attendance consistent with Company policies, the Americans with Disabilities Act (ADA), Family Medical Leave Act (FMLA), and other federal, state, and local standards. Adapts to changing duties, as required, based on business needs. Your Skills: Knowledge of tools and methods of gas and electric welding Ability to work in a variety of indoor and outdoor conditions. Ability to take and understand oral instructions. Reliability and dependability. Requirements: At least one year of welding, fabrication, and painting experience Knowledge of and appreciation for safe work habits Forklift experience Valid driver's license Hold an appropriate CDL or be willing to obtain an appropriate CDL Gritty, outgoing, and eager to learn. The environment is fast-paced, and the person in this role must be proactive, hardworking, highly organized, and an independent critical thinker. This Position Features: Family-Oriented Environment Excellent Benefits and Bonus Potential Physical Demands: Listed below are key points regarding the job's environmental demands and work environment. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.)for most of the workday. Required to exert physical effort in handling objects less than 40 pounds. Ability to stand for up to 12 hours as well as being able to bend, reach, push, and pull frequently. Must be able to work in all weather conditions. AAW1 All American Waste, LLC EEO Statement: The Company is committed to and supports equal employment opportunity and affirmative action to all employees and applicants. Equal employment opportunity means equal treatment of employees and applicants without regard to the following legally-protected characteristics: race, color, religion, creed, sex (gender identity), pregnancy (including childbirth and related medical conditions), sexual orientation, marital status, national origin, ancestry, age, medical condition, genetic information (including characteristics and testing), veteran status, physical or mental disability status or any other legally-protected status.

EB Welder - Non-Exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight-critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. The Electron Beam (EB) welder operator will prepare, arrange, fit, assemble and EB weld a variety of materials (stainless, carbon, nickel alloy, cobalt alloy etc.), and components using a CNC controlled Electron Beam Welding machines. Will perform a variety of repetitive, routine and less critical welding operations and appropriate setups within the limits of clearly established practices and procedures, under the direction of the EB Supervisor or lead person. Location: Based out of East Windsor, CT Reports to: EB Supervisor Salary Grade: Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. Apply EB welding processes to various parts, assemblies, and components Set-up, program, and operate EB and CNC controls for the EB welding process Interpret and execute production using drawings and blueprints Planning and general set up of EB welding operations in the facility, semi-manual and/or automatic, within the limits of certifications in accordance with customer requirements and current methods and process sheets Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications Utilize working knowledge of welding practice and weld-ability of current metal groups within their certification Under supervision, measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers. Maintain records and document in-process inspection data as required. Work with a variety of materials, including steel, copper, aluminum, titanium, Inconel, and other precious metals. Observe and listen to operating machines or equipment to help diagnose machine malfunctions and to determine the need for adjustments or repairs. Perform basic machine maintenance as required to maintain part quality and quantity standards. Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter. Report faulty or unusual conditions to the appropriate level of supervision. Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this . Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data. Must be able to read, write, understand, and speak English at a functional level. Participate in training as required Perform other duties as required or directed, whether or not explicitly mentioned in the job description Various other duties as assigned by Supervisor. Participate in training as required 5-10% Domestic Travel required Physical Demands : Must be able to lift, push, or pull at least 50 lbs. Regularly required to sit, stand, reach, bend, and move about our facility Requirements: Must have sheet metal fabrications skills, familiar with assembly/disassembly procedures Must be able to Set-up, program and operate EB and CNC controls for the welding process Minimum of 5 years' experience using CNC controlled EB welding equipment Experience with aerospace alloys such as Stainless Steel, Inconel, Titanium, Coba lt, and Alum Experience with in-process use of FPI a plus hours: 3p-11p AAP Statement Hanwha Aerospace USA Corporation, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. Subject to change with or without notice.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do: Perform routine hand fusion welding, electron beam welding and associated metal joining processes in a developmental or overhaul arena where specific methods and techniques have been established and tooling or other means to hold and locate work is readily available. Typical Duties: Follow detailed directions of leader/supervisor to carry out development, repair and restoration projects for engine parts and tools. Layout work requirements and obtain needed equipment to perform routine repair and alteration operations. Perform standard hand and machine welding operations to fabricate or restore parts and tools where close tolerances are not normally required and specifically defined criteria is used. Utilize black light process to determine extent of repairs required. Build up finished machined surfaces and repair simple cracks and other routine imperfections. Use a variety of fixed and variable measuring instruments to check dimensions and record results. Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary. Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operators check list for upkeep and to assure equipment operates properly. Assist others responsible for new process tryout, and other specialized assignments within the scope and skill level of this . Perform similar duties throughout assigned area within the scope and skill level of this . assist other trades working on joint projects where common skill crossover provides the opportunity for shared responsibilities and more efficient use of available skills. Refer difficulties to leader/supervisor. Maintain logs and records as requested to communicate findings and prepare requests for approval. May be required to train for obtain and maintain licenses, operator permits and certifications within assigned area. May be assigned to carry out tasks not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills. Qualifications You Must Have: High school diploma or GED equivalent Qualifications We Prefer: TIG welding and Inconel metal welding experience Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations). Learn More & Apply Now! Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship. Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation's Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40. In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? We have an immediate need for **Welder Developmental Overhaul 3rd Shift (onsite)** **FUNCTION:** Perform routine hand fusion welding, electron beam welding and associated metal joining processes in a developmental or overhaul arena where specific methods and techniques have been established and tooling or other means to hold and locate work is readily available. **What You Will Do:** + Follow detailed directions of leader/supervisor to carry out development, repair and restoration projects for engine parts and tools. + Layout work requirements and obtain the equipment needed to perform routine repair and alteration operations. + Perform standard hand and machine welding operations to fabricate or restore parts and tools where close tolerances are not normally required and specifically defined criteria are used. + Utilize black light process to determine extent of repairs required. + Build up finished machined surfaces and repair simple cracks and other routine imperfections. + Use a variety of fixed and variable measuring instruments to check dimensions and record results. + Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary. + Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operators check list for upkeep and to assure equipment operates properly. + Assist others responsible for the new process tryout, and other specialized assignments within the scope and skill level of this job description. + May be required to train for obtain and maintain licenses, operator permits and certifications within assigned area. **Qualifications You Must Have:** + High School Diploma or GED. + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Qualifications We Prefer:** + Knowledge of hand and machine welding practices include fit-up techniques for fabrication of weldments. + Understand fundamental principles of electron beam and laser theory. + Work from complicated drawings and specifications, use optical alignment equipment and a variety of precision measuring instruments. + 2 - 3 years trades training. **Qualifications We Value:** In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations). **Learn More & Apply Now!** Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship. Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation's Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40. This role is: **- Onsite:** Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

About Us: Enstructure New Haven is a full-service deep-water marine terminal operator and service provider. Strategically located in the Port of New Haven, our terminal provides turnkey, vertically integrated logistics services for dry bulk, liquid bulk, and breakbulk products. With our state-of-the-art infrastructure, we support ship, barge, truck, and rail capabilities, making us one of the most efficient and economical terminal operators on the East Coast. Terminal History: In 2018 Enstructure acquired Gateway Terminal, a bulk terminals and logistics company. This acquisition expanded the Enstructure's capabilities and footprint, comprised of 22 terminals strategically located near major population hubs along the East Coast, Gulf Coast, and Inland River system. Enstructure provides full-service and reliable logistics solutions to some of the world's largest companies in the energy, agriculture, food, manufacturing, construction, and public safety sectors. Job Title: Welder - Waterfront Terminal and Mobile Repairs Company: Gateway Location: New Haven, Connecticut Summary of Position: We are seeking a skilled Welder to perform in-house and mobile repairs at our waterfront terminal. The ideal candidate will be proficient in heavy stick welding and plasma cutting, ensuring the structural integrity and functionality of various equipment and components. This role involves both preventative and corrective maintenance, requiring a high level of technical expertise and the ability to work independently. Primary Responsibilities: Equipment Repairs: Perform preventative and corrective maintenance on all shipping containers and chassis using IICL standards as a guide. Welding and Cutting: Conduct welding and cutting during routine and extensive repair of containers and chassis in accordance with DOT, OSHA, and IICL procedures. Material Handling: Cut and measure materials, working with both pneumatic and electrical power tools. Damage Assessment: Measure and gauge damage for estimates and reparability, complete work orders, and inspection paperwork. Support Equipment Maintenance: Perform preventive and corrective maintenance on all support equipment as assigned. Chassis Maintenance: Conduct chassis maintenance to ensure safety and operational standards. Mandatory Qualifications: Preventive and Corrective Maintenance: Ability to perform both preventive and corrective maintenance on all assigned support equipment. Background Check: Must pass an extensive background check. Driver's License: Maintain a valid state driver's license. Drug Screen and Physical: Must successfully pass a drug screen and physical examination. Communication Skills: Excellent communication skills are essential for effective teamwork and reporting. Hand-Eye Coordination: Above-average hand-eye coordination is required for precision in welding and repairs. Basic Hand Tools: Proficiency in using basic hand tools. TWIC Card: Must hold a TWIC card or have the ability to obtain one. Outdoor Work: Ability to work outside in various weather conditions. Weekend Availability: Must be available to work on weekends as needed. Desired Experience: Chassis Maintenance: Experience in maintaining and repairing chassis. Stick Welding: Proficiency in stick welding techniques. Structural Welding: Ability to weld structural components ranging from 3/16” to 1” thickness. Pipe Welding: Skilled in welding pipes from 2” to 12” in diameter. Heavy Equipment Repairs: Experience in repairing heavy equipment such as buckets, grapples, and skip pans, including hard-facing fabrication as needed. Insurability Requirement: Driving History: Must possess a valid driver's license and a 3-year driving history that is acceptable to our auto insurance carrier. Physical Demands/Work Environment: While performing the duties of this position, the employee is required to stand, walk, use hands to handle or feel, and reach with hands and arms. The work environment involves hazards, risks, or discomforts typical of working with or around machinery with exposed moving parts, errant chemicals, heavy equipment, and extreme heights. Exposure to disagreeable weather conditions and extreme levels of temperature, ventilation, lighting, and noise levels in the work environment. This job description is not intended to be all-inclusive. The associate may perform other reasonable related business duties as assigned by the supervisor and other management as required. If you have the skills, enthusiasm, and a team-driven attitude, we encourage you to apply.

Looking for Mid to Entry Level Welders for Multiple Manufacturing Companies accross Prospect, Wallingford, and Meriden CT! 1st shift: hours vary based on location Pay Rate: $20.00-30/hr based on experience Position Summary: The Entry-Level Welder will assist in the fabrication and assembly of metal components used in sensor and electronic manufacturing. This is a hands-on position ideal for someone who is detail-oriented, safety-conscious, and eager to learn and grow within a high-tech manufacturing environment. Essential Functions of Welding Worker Include: Perform basic welding tasks including MIG, TIG, and spot welding on small metal components and assemblies Follow blueprints, schematics, and verbal instructions to meet product specifications Inspect welds for quality and conformance to company standards Operate and maintain welding tools, fixtures, and equipment Qualifications: Technical training or certification in welding preferred, but not required Basic knowledge of welding techniques, tools, and safety practices Ability to read and interpret technical drawings and work instructions Previous experience in a manufacturing or electronics environment is a plus Benefits Offered to Welders Employed Through Westaff: Weekly Pay with access to pay stubs online and through the Westaff mobile application Healthcare plans- including medical, dental, and vision Disability and life insurance plans Access to FREE online skill building courses Veterans and Military are encouraged to apply!

Job Description Title: Welder - Production Reports To: Welding Supervisor FLSA Job Status: Non- Exempt Hours worked per Week: 45 Travel Requirement: None Basic Job Functions: Welders produce welded assemblies from fabricated components per custom or stock specifications in a variety of metals using a combination of MIG, TIG, and ARC welding techniques. Applies knowledge and skill to perform intermediate welding duties. Experience: Minimum Vocational or Technical School certificate in welding trades, two (2) months experience in a welding shop environment or demonstrated proficiency in basic welding procedures. Certified to a moderate level of skill and knowledge to ensure compliance with standards and specifications. Education: High School Diploma or GED Essential Functions & Responsibilities With close supervision, positions, aligns, fits and welds together parts using jigs, welding torch and hand tools. Verifies conformance of workpiece to specifications, using square, ruler and measuring tape. Maintain a safe and clean work environment. Other duties as assigned by supervisor/manager. Required Skills: Ability to interpret blueprints and schematics, recognizing welding symbols and specifications. Basic Math skills and Mechanical aptitude. MIG & TIG welded parts as defined in specifications sheets. Working Conditions Working conditions are normal for a welding environment where exposure to moving mechanical parts, sharp cutting tools, dust, fumes and airborne particles, temperature extremes and elevated noise level. Employees must regularly lift and or move up to 25 pounds and frequently lift and or move more than 75 pounds. While performing the duties of this job the employee is regularly required to strand, stoop, kneel, climb, crouch, talk and hear. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. Machinery operation requires the use of safety equipment to include but not limited to; eye safety glasses, hearing protection and work boots.

USA Waste and Recycling USA Waste and Recycling, Inc USA Waste is at the forefront of waste and hauling and processing - innovating every step of the way as we work to find the best solutions for safe and efficient residential and commercial services. From building the largest state-of-the-art recycling facility in the country, powering our buildings with solar energy, and fueling our trucks with all-American natural gas, we are committed to you, our communities, and the planet. Our story started with a single truck. In 1974, founder Guy "Sonny" Antonacci and his wife, Mary Ann, started Somers Sanitation - named after our hometown of Somers, Connecticut. Today, three generations of family and a dedicated team of professionals are leading our companies into the future. While our fleet, facilities, services, and family have all grown, we take pride in continuing to operate our businesses based on the fundamental principle that has guided us since the beginning - to provide exceptional service and innovation to the communities and people we serve. Join a team committed to taking leaps forward to remain at the forefront of sustainability. Some see waste. We see possibilities. Position Summary: The Welder works in a fast-paced, results-oriented production environment and is responsible for reporting on a variety of items including garbage, recycling, yard waste containers, vehicle assemblies, and facilities components. Your Role: Repairs, modifies, or fabricates a variety of metal work including waste containers, vehicle assemblies, and facilities components. Cuts fits, and welds using gas and electric equipment. Performs skilled brazing and soldering. Uses a variety of machines and equipment in and out of repair areas. May operate heavy equipment as needed. Take an active role in the improvement of safety and health in the workplace. Participate in all required Company meetings, including weekly safety meetings. Maintains reasonable, regular, punctual attendance consistent with Company policies, the Americans with Disabilities Act (ADA), the Family Medical Leave Act (FMLA), and other federal, state, and local standards. Adapts to changing duties, as required, based on business needs. Your Skills: Knowledge of tools, and methods of gas and electric welding Ability to work in a variety of indoor and outdoor conditions. Ability to take and understand oral instructions. Reliability and dependability. Requirements: At least one year of welding, fabrication, and painting experience Knowledge of and appreciation for safe work habits Forklift experience Valid driver's license Gritty, outgoing, and eager to learn. The environment is fast-paced, and the person in this role must be proactive, hardworking, highly organized, and an independent critical thinker. This Position Features: Family-Oriented Environment Excellent Benefits and Bonus Potential Physical Demands: Listed below are key points regarding the job's environmental demands and work environment. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.) most of the workday. Required to exert physical effort in handling objects less than 40 pounds. Ability to stand for up to 12 hours as well as being able to bend, reach, push, and pull frequently. Must be able to work in all weather conditions. USAW1

The position is responsible for performing all functions of welding ensuring personal and product safety, quality, and productivity. Set up, adjust, and operate welding equipment to weld castings, Sheetmetal details, etc. Following Job Operation Sheets to complete repairs as necessary Complete moderate to advanced fitting and welding tasks while applying standard practices. Capable of obtaining and holding required weld qualifications/certifications Perform plug welds in castings, cosmetic weld build up and standard join configurations Check required dimensions using calipers, micrometers, height gages and other inspection tools or fixtures. Identify any Red flag problem areas. Interpret and follow written instructions, sketches, weld schedules, drawings and documents. Involvement in development work, fixturing and process. Work independently with limited oversight. Meet or exceed operations standards for efficiency. Knows when to stop and find appropriate interpretation when necessary. Maintain thorough understanding of how to produce quality parts. Must be able to use mathematics relevant to functions. Qualifications and Education Requirements 5 Plus years TIG/GTAW experience. High school diploma or equivalent. Welding trade school or equivalent experience. Must pass internal welder qualification for welding magnesium within introductory period. Must qualify for stainless and aluminum certifications within the first year. Ability to read and interpret blueprints/drawings. Experience in welding aerospace components comprised of inconel, aluminum, mild steel and stainless steel. Keen attention to detail, accuracy, and safety. Familiar with a variety of metals and finishes. Use mathematical and reading skills. Experience with measuring devices such as meters, gauges, calipers, and other measuring instruments. Working knowledge of safety protocols. Experience working with close tolerances. Experience working in an aerospace manufacturing environment (NADCAP and FAA requirements). Ability to follow standard precautions using personal protective equipment as required. Meets D17.1 visual acceptance criteria (corrective or non-corrective). Strong communication skills as well as a team player. Preferred Skills Aerospace welding background. Manufacturing background. Physical Requirements Ability to lift up to 50 pounds. Ability to stand and sit for long periods of time. Ability to perform repetitive motion (rotating wrists, using small/large tools). Ability to tolerate constant noise (machine motors, grinding, high frequency etc.). Pre-employment requirements All applicants must satisfy a pre-employment DOT/FAA Alcohol & Drug Screen and a background check. This position must comply with our FAA regulated Random Alcohol & Drug Program for Safety Sensitive position. First Shift 7am - 3:30pm (approved OT prior to 7am & Sat mornings) Second Shift-3:30pm - midnight (approved OT after midnight) 10% differential

About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic Inc. is seeking a dedicated and skilled Fabrication Welder. The Fabrication Welder produces a variety of sheet metal parts, which meet dimensional requirements. Set up and align parts per shop prints in preparation for welding and perform welding operations, and final fabrication assembly. Working either individually, or as part of a small team to produce metal buildings and enclosures. Job Duties: * Reference shop prints to determine where each weld is to be performed and meet the size and length requirements of each weld specified * MIG welds mild and stainless steel * Create basic fittings * Adjust the machine to maintain proper welds * Removes material using grinding process * Reads drawings and inspect parts for basic dimensions * Performs basic layouts (positioning and alignment) * Inspects parts against complex engineered drawings * Spray transfers MIG weld * Examines weld bead for acceptable attributes * Performs cope and fit * Maintains overall dimensions, square, and plum during the welding process as needed * Finish grind, surface finishing based on departmental requirements * Repairs improper welds * Tack welds * Stud welds * Square parts * Torch cutting Minimum Qualifications: * Two plus years of experience welding in a manufacturing or industrial setting required * Two plus years of experience in forklift operation required * Two plus years of experience in applicable QAPs (Quality Assurance Procedures) required * Two plus years of experience in the use of basic tools (squares, clamps, fillet gauge, angle finder, etc.) required * Two plus years of experience in shear, brake press, turret punch, CNC laser, ironworker, band saw, welding machine, cutting torch, plasma cutter, grinder, overhead crane, ratchet straps, and other hand tools required * High levels of organizational and time management skills required * High levels of analytical, observational, and active listening skills required * High levels of reliability required * Excellent communication skills both written and verbal required * US work Authorization Required * Ability to pass physical, drug, driving, and background check required * Ability to physically push, pull, and lift 50lbs or more required * Ability to stoop and bend required * Ability to sit, stand, and walk for four plus hours at a time required * Ability to read a tape measure and prints required * Ability to convert decimals to fractions and utilize conversion charts required * Excellent manual dexterity required * Excellent color vision and eyesight required Preferred Qualifications: * 1G & 3G Welding certification preferred * High school diploma or equivalent preferred * Forklift certification preferred Testing Requirements: Welding Test Required Benefits: * Medical, dental, vision, HSA, term life, AD&D, STD, LTD * 100% medical premium paid for by Panelmatic for the employee-only level medical coverage * 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family) * 401K and bonus * Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided * PTO and paid holidays provided * Career advancement opportunities * Competitive wages * Family-friendly environment with average employee tenure above five years

First Shift 7am- 4pm Summary: The main function of the Fabricator is to ensure production equipment and plant machinery are operating properly, react and repair in a timely fashion in the event of an emergency breakdown, and provide fabrication skills for necessary machine upgrades and / or repair. Essential Job Functions : Ability to manufacture quality product with smooth seams, joints, or grind and polished surfaces. De-bur and grind metal as necessary to achieve proper surface texture per job specifications Welds components in flat, vertical, or horizontal positions Recognize, set up, and operate hand and power tools common to the welding and fabrication trade Work with UHMW Machining and working with a lathe Understanding of pneumatics Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter Mark or tag material with proper job number, piece marks, and other identifying marks as required You will support production with repairs or replacements of worn safety guards and mechanisms and maintain a clean, orderly work area Custom design, fabricate, machine, weld and document various machine safety guards and components Work from complex proto-type blueprints, sketches and verbal instruction Perform regular Preventative Maintenance as scheduled. Daily inspection of production line equipment prior to startup. Ensure proper operation and repair machines as needed. Support production staff on daily basis and help to resolve mechanical issues on production lines. Perform troubleshooting and repairs including, but not limited to, mechanical, pneumatic, hydraulic and plumbing systems throughout the facility. Read and interpret equipment manuals and work orders to perform required maintenance and service. Perform regular preventive maintenance on machines, equipment and plant facilities as scheduled. Use a variety of hand and power tools, electric meters, welders, machining equipment and material handling equipment in performing duties. Comply with OSHA Safety and all company, USDA, FDA regulations for food plants. This requires the understanding of HAACP and SSOP plans and the ability to comply with these regulations. Perform other duties as assigned or needed. Detect faulty operations, faulty machinery, defective material and report those and any unusual situations to proper supervision. Order materials and parts required for repairs and maintenance. Work overtime as needed and scheduled. Job Requirements: High School Diploma or equivalent Minimum 3 years welding experience Experience doing 3-A Sanitary welds Ability to read prints with AutoCAD software Must be physically fit and able to work on feet most of the day. Capable of lifting 75 pounds repetitively. Experience in manufacturing environment preferred. Demonstrated success at attention to detail Ability to independently examine information and/or situations, evaluates potential impact, options and makes recommendations Operate MIG and TIG welders, torches, band saw, and shear. Ability to weld different types of materials like (coiled steel, stainless steel, aluminum) Must have manual dexterity, accuracy, and attention to detail Must have knowledge of metal properties and other material Must have mathematical skills and analytical abilities including Dimensional Measurements Must be able to work with minimal supervision Basic computer skills required

Performs a wide variety of duties to set up and operate sheet metal equipment following standard operating practices and procedures. Essential Duties and Responsibilities: Sets up, maintains, and operates various sheet metal fabricating machinery, including but not limited to a Roll Former, Fin Press Expanding, Shear, Press Brake, Tube Flare; Cut Off Saw and/or Amada/N/C Turret Punch Press Performs various production duties from Work Orders, Part Prints, Standard Setup Procedures, Quality, and OJT manuals Utilizes and maintains calipers, rules, combination square, protractor, veneer, feeder gauges, hand tools, wrenches, micrometers, hex keys, and other similar tools Removes and inspects finished products for compliance to specifications, reports defects to supervision, and makes machine adjustments as directed Uses lift and/or platform trucks to move supplied and finished products to various plant locations Maintains required production, safety, and other records and data Inspects and reports defective and unsafe machinery/parts to supervision Wears and maintains safety equipment and obeys safety rules, practices, and procedures Maintains work area in a neat, orderly, and safe manner Performs other similar or related duties as required or requested

About Us: As a global manufacturer of complex aircraft engine components, Pursuit Aerospace is founded on a commitment to relentless, continuous, operational improvement and extraordinary customer service. We pride ourselves on competitive cost structure, exceptional on-time delivery, and industry-leading quality. The Pursuit family of companies has cultivated long-term relationships with our customers around the world through respect, teamwork, technology, and trust. We are driven to develop industry leading process innovations and manufacturing techniques on behalf of our customers. Our exceptional quality is driven by a deep investment in and the daily practice of continually improving our people, processes, and products. About the Opportunity: Primarily perform grit blast duties, and learn all the processes to plan, lay out, repair and install sheet metal products and parts. Location: Manchester, CT This role will be onsite 100% of the time. Responsibilities: Part masking of critical no blast areas, and markings Precise Stripping of coating from aerospace parts using grit blast. Work to specific tech manuals requirement for grit blasting. Look up, read, and interpret specification. Visually Inspect parts for coating removal Stand for long periods of time. Able to work with arms in a blast cabinet. Perform general machine maintenance including but not limited to (replace hoses, gloves, empty fill grit, change nozzles, ) Use of basic hand tools (screwdriver, Wrenches etc,) Move heavy grit barrels with hand truck Learn and gain a better understanding of calibrated tooling and equipment such as but not limited to vernier calipers, height gages, pi-tapes, plug gages, micrometers, go/no go gages, thread gages, cylindrical plug and vertical dividing head. Become proficient in interpreting blueprints to determine how and where to fabricate, assemble and install sheet metal products Become proficient in measuring, marking dimensions, and lay out material to be installed using tools such as scribes, rulers, calculators and squares Become proficient in fastening joints and seams in sheet metal with solder, welds, caulk, bolts and metal driver clips, ensuring work is done carefully and bonds will last Assist in checking parts using specified gages or check parts using furnished fixtures to see that dimensions are being maintained. Consistently maintain specific tolerances and accurately perform dimensions Required Qualifications: High School Diploma or equivalent or 1 year of relevant experience Must be authorized to work in the U.S. on a full-time basis without sponsorship now or in the future. The Company cannot offer employment to visa holders who require employer sponsorship in the future or cannot work now on a full-time basis. Must be able to perform work subject to ITAR/EAR regulations. Preferred qualifications Previous Grit blast experience Professional sheet metal fabricator certificate Basic knowledge of specific properties of metals used Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and blueprints Physical Requirements: Requires mobility in a manufacturing plant environment while using Personal Protective Equipment. Must be able to frequently sit, stand and walk. Must be able to lift and carry up to 15 pounds. Must be able to have prolonged periods sitting at a desk and working on a computer. Compensation & Benefits: Pursuit Aerospace also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements, among other things. Equal Opportunity Employer: Pursuit Aerospace is an Equal Opportunity Employer. We adhere to all applicable federal, state, and local laws governing nondiscrimination in employment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? We have an immediate need for Welder Developmental Overhaul 3rd Shift (onsite) FUNCTION: Perform routine hand fusion welding, electron beam welding and associated metal joining processes in a developmental or overhaul arena where specific methods and techniques have been established and tooling or other means to hold and locate work is readily available. What You Will Do: * Follow detailed directions of leader/supervisor to carry out development, repair and restoration projects for engine parts and tools. * Layout work requirements and obtain the equipment needed to perform routine repair and alteration operations. * Perform standard hand and machine welding operations to fabricate or restore parts and tools where close tolerances are not normally required and specifically defined criteria are used. * Utilize black light process to determine extent of repairs required. * Build up finished machined surfaces and repair simple cracks and other routine imperfections. * Use a variety of fixed and variable measuring instruments to check dimensions and record results. * Recognize need and arrange for repair or replacement of equipment used in performing the work as necessary. * Perform routine servicing throughout the assigned area following specified procedures and written instructions such as operators check list for upkeep and to assure equipment operates properly. * Assist others responsible for the new process tryout, and other specialized assignments within the scope and skill level of this job description. * May be required to train for obtain and maintain licenses, operator permits and certifications within assigned area. Qualifications You Must Have: * High School Diploma or GED. * U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Qualifications We Prefer: * Knowledge of hand and machine welding practices include fit-up techniques for fabrication of weldments. * Understand fundamental principles of electron beam and laser theory. * Work from complicated drawings and specifications, use optical alignment equipment and a variety of precision measuring instruments. * 2 - 3 years trades training. Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations). Learn More & Apply Now! Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship. Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation's Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40. This role is: * Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job Description Welder USA Waste and Recycling USA Waste and Recycling, Inc USA Waste is at the forefront of waste and hauling and processing - innovating every step of the way as we work to find the best solutions for safe and efficient residential and commercial services. From building the largest state-of-the-art recycling facility in the country, powering our buildings with solar energy, and fueling our trucks with all-American natural gas, we are committed to you, our communities, and the planet. Our story started with a single truck. In 1974, founder Guy "Sonny" Antonacci and his wife, Mary Ann, started Somers Sanitation - named after our hometown of Somers, Connecticut. Today, three generations of family and a dedicated team of professionals are leading our companies into the future. While our fleet, facilities, services, and family have all grown, we take pride in continuing to operate our businesses based on the fundamental principle that has guided us since the beginning - to provide exceptional service and innovation to the communities and people we serve. Join a team committed to taking leaps forward to remain at the forefront of sustainability. Some see waste. We see possibilities. Position Summary: The Welder works in a fast-paced, results-oriented production environment and is responsible for reporting on a variety of items including garbage, recycling, yard waste containers, vehicle assemblies, and facilities components. Your Role: Repairs, modifies, or fabricates a variety of metal work including waste containers, vehicle assemblies, and facilities components. Cuts fits, and welds using gas and electric equipment. Performs skilled brazing and soldering. Uses a variety of machines and equipment in and out of repair areas. May operate heavy equipment as needed. Take an active role in the improvement of safety and health in the workplace. Participate in all required Company meetings, including weekly safety meetings. Maintains reasonable, regular, punctual attendance consistent with Company policies, the Americans with Disabilities Act (ADA), the Family Medical Leave Act (FMLA), and other federal, state, and local standards. Adapts to changing duties, as required, based on business needs. Your Skills: Knowledge of tools, and methods of gas and electric welding Ability to work in a variety of indoor and outdoor conditions. Ability to take and understand oral instructions. Reliability and dependability. Requirements: At least one year of welding, fabrication, and painting experience Knowledge of and appreciation for safe work habits Forklift experience Valid driver's license Gritty, outgoing, and eager to learn. The environment is fast-paced, and the person in this role must be proactive, hardworking, highly organized, and an independent critical thinker. This Position Features: Family-Oriented Environment Excellent Benefits and Bonus Potential Physical Demands: Listed below are key points regarding the job's environmental demands and work environment. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.) most of the workday. Required to exert physical effort in handling objects less than 40 pounds. Ability to stand for up to 12 hours as well as being able to bend, reach, push, and pull frequently. Must be able to work in all weather conditions. USAW1