Fabricator jobs in North Carolina - 227 jobs

Orbital Welding Experience

Job Purpose Honda Aero, in Burlington, North Carolina, is looking for a team member who is a Fabricator with GTAW experience responsible for the fabrication and welding of aerospace sheet metal and casting engine components. Possesses the welding ability to certify to Aerospace Specifications for thin stainless, nickel based (Inconel), and other aerospace sheet metal. Key Accountabilities Set-up and layout jobs using work instructions, diagrams and fixtures following procedures to fabricate and GTAW in all positions including the use of rotary turntables. • Sets up machines according to work instructions to trim, size, form, inspect, clean, and GTAW material to meet requirements. • Inspects, maintains and logs preventative maintenance on equipment needed for fabricating and welding. • Fabrication of shop aids and fixtures to assist fabrication and welding. • Quality checks using gauges, calipers, micrometers, height gauges, etc. • Weld evaluations for weld size, face and root reinforcement, cracks, inclusions, and porosity. • Must maintain internal skills matrix. • Must maintain HAI welding certifications. • Complies with internal quality system and regulatory requirements. • Lean Manufacturing, general housekeeping, work in a teaming environment, 5S and COP. • Cleans work area, tools, and equipment at end of shift. • Follow all business policies and procedures. • Performs other duties as assigned. Qualifications, Experience, and Skills Minimum Educational Qualifications HS diploma or GED. Minimum Experience Minimum of 5 years of hands-on Fabrication and minimum of 5 years of hands-on GTAW experience, both preferably in the aerospace industry. Knowledge of super alloy processing preferred. AWS or equivalent certifications preferred, but not required. Other Job-Specific Skills Ability to work independently and take on new challenges and assignments. Good attention to detail and eye/hand coordination skills. Uses mathematical and reading skills. Interprets specifications, blueprints, and work instructions. Working Conditions Climate-controlled production environment. Regular exposure to the manufacturing areas which under certain circumstances require the use of personal protective equipment such as safety glasses with side shields, mandatory hearing protection and safety shoes. Ability to frequently stand, walk, and sit as well as regular use of hands, fingers, and arms. Ability to lift up to 30 pounds.

The position of Metal Fabricator is responsible for constructing structures and sign cabinets out of raw materials. Construction of structures and sign cabinets out of aluminum, steel or other materials according to create individual custom signage according to customer specifications, shop drawings and blueprints Build various sign types including channel letters, awnings, walls signs, pylon signs, etc Use various equipment to cut, bend, turn, mill and drill to specified lengths and widths per work order. Interpret data to select materials, layout reference points and sequence of operations. Operate metal fabricating machines (shears, saws, breaks, bending machines, and punch and forming presses.) Weld, rivet or bolt components together (primarily aluminum.) Inspect parts for defects. Prep parts or move to other areas as appropriate. Review daily schedule requirements to determine priorities. Operates machinery and equipment including routers, welders, saws, air drills and power tools Interpret blueprint and sketches To become a part of our team we require applicants for our Metal Fabricator position to have the following qualifications: SKILLS Mechanical aptitude Basic mathematical skills, ability to read a tape measure Effective interpersonal, oral and written communications skills Ability to read blue prints and interpret sign/shop drawings and specifications Ability to multi-task and handle numerous projects simultaneously, time management EDUCATION High School diploma, GED or the equivalent of training, education and experience EXPERIENCE Two years of experience as Metal Fabricator, service or similar industry. Sign industry experience preferred Allen Industries offers all full-time employees competitive pay as well as an excellent benefit package including: medical, dental, vision, paid time off, paid holiday's, supplemental STD, LTD and Life insurance and 401K with company match. General Disclaimer: The duties listed above are intended only as illustrations of the various types of work that may be performed. Other duties may be assigned as needed by the Company. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Allen Industries is an Equal Employment Opportunity, Affirmative Action Employer. We consider applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital, disability or veteran status.

• Lay out patterns and fabricate for sheet metal reducers, square to rounds, laterals, WY's and elbows. (Carbon, galvanized and stainless steel.) • Lay out galvanize ductwork. • Fabricate stainless steel (16 gauge) conveyor hoods and chutes. • Fabricate miscellaneous items such as guards, screens, covers and pans. • Measure, fabricate and install products. • Mentor less experienced fabricators. Qualifications • Must be able to work 8 to 10 hour days. • May be required to work some weekends and holidays. • Tig welding is a plus. What We Offer Supportive work environment Opportunity to learn additional skills as well as upward mobility Eight paid holidays Start earning two weeks of vacation first year Company paid life insurance, short and long term disability 401(k) match of 100% up to 4% Pre-employment drug test required. AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

We are seeking a skilled Metal Fabricator to join our dynamic team. The ideal candidate will have a strong background in metal fabrication processes and be proficient in various techniques and tools. This role involves interpreting blueprints, operating machinery, and ensuring high-quality standards are met throughout the fabrication process. Responsibilities Read and interpret blueprints and technical drawings to determine specifications and materials required for projects. Operate a variety of machinery including press brake machines, plasma cutters, and other power tools to fabricate metal components. Perform welding tasks using FCAW (Flux-Cored Arc Welding) techniques to assemble metal structures. Execute pipe threading operations as needed for specific projects. Ensure compliance with industry codes and standards during all fabrication processes. Maintain a clean and safe work environment by following safety protocols and guidelines. Collaborate with team members to meet production deadlines while maintaining quality standards. Experience Proven experience in metal fabrication or a related field is preferred. Proficiency in blueprint reading and understanding technical specifications is essential. Familiarity with operating forklifts and other material handling equipment is a plus. Strong skills in welding, particularly FCAW, along with knowledge of pipe threading techniques. Experience using press brake machines and plasma cutting tools is highly desirable. Basic math skills are necessary for measuring materials accurately and calculating dimensions. If you are passionate about metal fabrication and possess the required skills, we encourage you to apply for this exciting opportunity to contribute to our team's success!

Gentry Service Group, located in Swannanoa, NC, is a customer-focused heating and air-conditioning company that was originally started in 1963. We employ highly skilled associates whose goal is to provide the best customer service to Asheville and the surrounding area. We currently have an opening for a Sheet Metal Fabricator Apprentice to join our team. We offer the best pay and benefits. This position requires someone who is a self-driver with strong mechanical skills who can spot problems and find solutions, and someone who holds themselves accountable for a high-quality work product. If this sounds like you, then we'd like you to apply. Schedule: Monday - Friday, 7:00am- 4:00pm with some overtime Compensation: $18.00-$20.00 per hour Benefits: Medical, Dental, Vision, 15 Paid Vacation Days, 9 Paid Holidays, 401k with Company Match, tool account with 0% interest, access to 24/7 chaplain, faith-based organization with a high emphasis on the importance of family.. Primary Job Function: Assist with the fabrication and assembly of custom sheet metal products and equipment, such as ductwork, plenums, fire dampers, diffusers, and more. Assist with receiving in the warehouse and other various duties as assigned. Required Qualifications: * Valid driver's license * Insurable by company insurance carrier * Basic safety knowledge of tools and surroundings * Unloading/loading of trucks and in the warehouse * Be able to carry 100 pounds unassisted. * Demonstrate mechanical aptitude. * Prior experience in custom sheet metal fabrication preferred but not required * Ability to read a tape measure * Exceptional organizational, interpersonal, and communication skills * Ability to work independently * Safety conscious, dependable, and contribute to our positive environment and culture * NO PHONE CALLS OR IN-OFFICE INQUIRIES ABOUT THIS POSITION. ALL CANDIDATES MUST APPLY ONLINE *

Discover your exciting role An entry-level position in a production environment with no prior experience required. In this area you'll form sheet metal into cylindrical and conical products and prep and fabricate stainless steel pipe and fittings for welding and coating. Explore your tasks and responsibilities Under close supervision you'll be introduced to a series of duties and responsibilities with increasing complexity to include, but are not limited to the following: * Set up work area, select and verify the materials for production, and meet daily production and quality demands in such specific areas as: Grinding; Rolling; Seam Welding; and Flanging. * Comply with health, safety (including OSHA), and environmental procedures, and ensures the cleanliness of the area. * Work in a team environment. * Continue to learn and expand one's own capacity within this job by increasing knowledge and skill base. * Perform various other assignments per lead person or supervisor direction. Show your expertise QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Entry-level position with training provided. Minimum high school diploma or equivalent. LANGUAGE SKILLS Ability to read and understand work instructions, technical documents (cut sheets), safety policies, company policies and procedures. Ability to complete written documentation. Ability to effectively communicate with co-workers and superiors. MATHEMATICAL SKILLS Ability to apply basic math skills including adding and subtracting whole numbers and fractions. Ability to accurately read a tape measure to 1/32". PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand and use both hands to finger, handle, or feel. The employee is occasionally required to walk and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderately loud and hearing and eye protection are mandatory. Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact via E-Mail at ********************** Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Since 1953, Red Valve has set the standard for solving the world's toughest flow control challenges through unmatched elastomer design and manufacturing experience. Red Valve is dedicated to exceeding customer expectations with proven, creative, high-value solutions. Red Valve has a passion for innovation and creativity, with a wealth of patents and best approaches developed for customers' needs. The people of Red Valve embrace this passion every day, providing reliable solutions to customers' most demanding challenges, wherever and whenever they are needed most. Our Core Values Driven to Win Right - Can Do! - High Power - Low Ego & Thrive Together Red Valve was acquired by DeZURIK on January 1, 2021. Our organization offers the following: * Sign On Bonus * Health and Wellness Incentives * Employee Engagement Activities A Red Valve Welder II is expected to safely meet production goals and objectives for the company by assembling various fabricated and/or cast products and weld various metals using MIG, TIG, and Stick equipment. This position requires highly motivated self-starters who thrive in a fast-paced manufacturing environment. The candidate should be comfortable working with various metals, such as cast iron, steel, stainless steel, aluminum, and bronze. The candidate will focus on setting up, operating, maintaining, and troubleshooting manufacturing production equipment to manufacture products according to production specifications, schedules, volume/cost/wastage targets, and quality standards. Additionally, you will need to monitor the quality of output to identify, discard, or re-manufacture faulty products and maintain accurate daily production records. Requires basic knowledge of job procedures and tools obtained through work experience and may require vocational or technical education. Problems are typically of a routine nature but may require interpretation or deviation from standard procedures. Works within established procedures and guidelines with limited ability to modify methods and approach. Completes assigned tasks with a moderate degree of supervision. Follows established safety/environmental practices and regulations. Essential Duties and Responsibilities include the following: * Correctly reads job specifications from build sheet/work order/blueprint/specification, to determine exact material required and welds materials to produce sub-assemblies or finished products * Manufacture parts to meet production and quality requirements * Ensures that all equipment and tools are maintained in working order * Tracks production via daily management and ERP system * Notifies supervisor of any mechanical or material issues * Maintains a clean and safe work area. * Responsible for maintaining high quality standards * Participate in Kaizen events and continuous improvement/lean initiatives * Maintain work cell through 5S and housekeeping * May need to operate a forklift * Participates in special projects as required Supervisory Responsibilities This position does not have any supervisory responsibilities. Education High school diploma or general education degree (GED); or a minimum of two years related manufacturing experience and/or training; or equivalent combination of education and experience with an emphasis in machine operation Skills/Experience * 3-5 years of welding experience * Required: Demonstrate a high level of energy, drive, enthusiasm, initiative, and professionalism * Required: Basic mathematical abilities * Required: Intermediate ability to demonstrate accuracy and thoroughness * Required: Must be able to take direction and work as part of a team * Required: Basic ability to read, write, and communicate * Required: Ethical conduct * Required: Intermediate ability to read blueprints and build sheets * Required: Ability to operate mandrels, cranes, hoists, and other various equipment typical in a manufacturing environment, as well as various hand power tools * Required: Ability to perform physical manufacturing work; good mechanical aptitude * Required: Must be able to lift 50lbs on a regular basis * Required: Must be able to pass a background check and an eight panel drug screening * Preferred: Basic computer skills * Preferred: Experience working with the following materials is preferred: rubber, elastomers, metals Travel No travel required. Physical Demands To perform this job successfully, the physical demands listed are representative of those that must be met by an employee. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to handle and feel, reach with hands and arms, talk and hear. The employee may occasionally be required to crouch. The employee may occasionally lift items as heavy as 50lbs. Specific vision abilities may include the employee's ability to see near and far distances. DISCLAIMER: The above information on this has been designed to indicate the general nature and level of work performed by the employee within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of any employee assigned to this job. Nothing in this job description restricts management's right to assign duties and responsibilities to this job at any time.

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking an ASME/Hygienic Welder based out of our Spring Hope, NC office. The typical work hours are Monday thru Friday 7:00am - 5:30pm. The candidate will be responsible for: Working with the ASME and Hygienic Division. Executing ASME National Board Repairs. ASME stamped fabrication. Fitting and welding of hygienic piping systems. Perform all other additional assignments per supervisors direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Experience in GTAW, GMAW, and SMAW welding processes. Successful completion of a welding and/or skills test. Must have a great attitude and willingness to perform in a variety of scenarios. Occasional weekend work and travel is required. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Job Description As a result of our phenomenal growth, MSS Solutions, LLC has an opening for a Welder - Mechanical. If you are an experienced professional who is looking to grow your career and contribute fresh and innovative ideas to serve our customers, this is an opportunity you should explore! A career at MSS is not just a job -- it's collaborating with the business's best talent. It's having a part in building a better future. It's making a difference in people's lives. The success of MSS is a direct reflection of our team's dedication, passion, and hard work. Since 1996, MSS has taken pride in retaining some of the best talents in the industry by promoting a culture of respect, collaboration, and empowerment. Roles and Responsibilities Use hand-welding or flame-cutting equipment to weld or join metals components or fill holes, indentations, or seams of fabricated metal products or pipes. Read a Weld Procedure Specification (WPS) to produce a weld according to the requirements of the procedure. Weld components in flat, vertical, or overhead positions. Ignite torches or start power suppliers and strike arcs by touching electrodes to metals being welded. Fabricate and construct piping segments and attach fittings that require field fit-up, erection, and assembly. Clamp, hold, tack-weld, heat-bend, grind, or bolt parts to obtain required configurations and positions for welding. Detect faulty operation of equipment or defective materials and notify supervisors. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Examine workpieces for defects and measure workpieces to ensure conformance with specifications. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Follows all safety policies and procedures. Other such duties and responsibilities as assigned by the company from time to time. Qualifications and Requirements • Minimum of 3 years of pipe welding (field) to include all the following procedures: o MIG o TIG o Stick • Must be able to pass an in-house welding test (6G criteria) • Must have own hand tools. • Must successfully pass a background check and drug test • Ability to weld diverse types of metals • Knowledge of hand and power tools • Ability to read blueprints Physical Demands: Occasional sitting, frequent stooping, crouching, kneeling, balancing, and climbing. Constant standing, walking, reaching and gripping. Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to talk and hear. Occasional lifting up to 50 lbs. (maximum solo lift) and constant lifting to 25 lbs., placing this position in the very heavy physical demand classification (PDC). Material Handling:? lifting from floor level to overhead, with occasional lifting up to 115 lbs. frequent lifting up to 50 lbs. and constant lifting up to 25 lbs., placing the position in the very heavy physical demand classification (PDC).? Work Environment: Exposure to weather, extreme heat or cold, high noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to toxic or caustic chemicals, wet and/or humid, vibration, proximity to moving mechanical parts, working high exposure places. Benefit Highlights At MSS, we value our employees by providing a supportive culture with competitive compensation and a benefits package that continues to evolve based on our business's growth and our employees' needs. Currently, our benefits include: Medical/Dental/Vision Insurance 401k with Employer Contributions PTO Paid Holidays Employee Assistance Program Long-term Disability Short-term Disability Flexible Spending Plan Health Savings Plan Additional Notes If you are unable to apply electronically and require an accommodation, please contact ************************ MSS Solutions, LLC is an equal opportunity employer and a drug-free environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. MSS Employees, please visit the MSS Career Center or contact HR to apply.

Job Description About the Job: Hm Staffing Solutions is looking for a skilled and reliable Welder/Helper to join our team! You'll work on a variety of metal fabrication and repair projects in a fast-paced, safety-focused environment. Responsibilities: MIG, TIG, and Stick welding Reading and interpreting blueprints and technical drawings Measuring and cutting materials to specifications Assembling and inspecting finished products Maintaining a clean and safe workspace Requirements: Proven welding experience or certification Ability to read blueprints and schematics Strong attention to detail and work ethic Physical ability to lift up to 50lbs and stand for long periods Safety-first mindset Preferred: Experience with structural or pipe welding Location: Youngsville, NC Position Type: Full-Time Pay: Starting at $20 for helpers Start Date: ASAP

Temp To Full-Time Busy Sheet Metal Manufacturer is seeking a reliable Sheet Metal Fabricator to join their team! Hours Monday to Friday 7:00am to 3:30pm or 3:oopm to 2am Monday to Thursday. OVERTIME IS MANDATORY WHEN REQUIRED!!!!!!! Pay is $14 for 1st shift $15 2nd shift A Sheet Metal Fabricator job involves creating and assembling metal products by cutting, bending, and shaping sheet metal according to blueprints and specifications, often using hand and machine tools . Key Responsibilities: Reading and Interpreting Blueprints: Fabricators must be able to understand and interpret technical drawings and blueprints to determine dimensions, shapes, and fabrication methods. Selecting and Preparing Materials: They select appropriate sheet metal types and thicknesses based on project requirements and prepare the metal for fabrication. Cutting, Bending, and Shaping Metal: Using various tools and machines (shears, brakes, presses, forming rolls), fabricators cut, bend, and shape sheet metal into the desired forms. Welding and Joining: They may be responsible for welding or joining metal pieces together using various welding techniques. Assembling and Installing: Fabricators assemble fabricated parts and install them in supportive frameworks or structures.

AirClean Systems Job Title : Welder Perform all welding duties under the direction of the Team Lead. Ensure products are assembled efficiently and safely for delivery to final assembly Under general supervision, performs assembly operations at a work station or work bench. Uses hand tools, power tools, and measuring devices such as tape measure to perform the following duties: Sanding, Cutting, Drilling, Packaging / Polishing, Material Handling, Weld Preparation. Assembly of new machines, rebuilding old machines, and/or modifications to either. Proficient in assigned welding techniques. Working knowledge of fixturing and weld set up parameters (amps, volts, etc.). Welding equipment maintenance. Read and interpret blueprints, assembly drawings, and part lists to perform required functions. Inspects grooves, angles, and gap allowances, using micrometer, caliper, and precision measuring instruments. Welds components in flat, vertical, or overhead positions using metal or plastic components. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accountabilities Welding projects are accomplished in a timely manner and timelines are maintained and achieved Quality products are produced in accordance with standards Educational requirements High School Diploma/GED or equivalent Basic math skills Basic problem solving ability Experience level Welding experience a plus, but not necessary Successful completion of an internal welding test Ability to communicate with co-workers and management Terms of employment This is a full-time, hourly, non-exempt position. Hours The general hours shall be either first shift or second shift. First shift operates Monday-Friday, 7:00am to 3:30pm with a one-half hour break for lunch. Second shift operates Monday-Friday, 3:30pm - midnight with a one-half hour break for lunch. Other paid breaks are included for each shift. Work Environment Work is regularly performed in a warehouse environment. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to stand/walk. The employee is occasionally required to sit. The employee must occasionally lift, carry, push or pull up to 80 pounds. The employee must frequently use fine and gross hand motor skills. Travel No travel required. Benefits Compensation package includes 401K plan, Paid Time Off, dental insurance, vision insurance, Teladoc and health insurance after a 90 day introductory period. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

The position of Metal Fabricator is responsible for constructing structures and sign cabinets out of raw materials. Construction of structures and sign cabinets out of aluminum, steel or other materials according to create individual custom signage according to customer specifications, shop drawings and blueprints Build various sign types including channel letters, awnings, walls signs, pylon signs, etc Use various equipment to cut, bend, turn, mill and drill to specified lengths and widths per work order. Interpret data to select materials, layout reference points and sequence of operations. Operate metal fabricating machines (shears, saws, breaks, bending machines, and punch and forming presses.) Weld, rivet or bolt components together (primarily aluminum.) Inspect parts for defects. Prep parts or move to other areas as appropriate. Review daily schedule requirements to determine priorities. Operates machinery and equipment including routers, welders, saws, air drills and power tools Interpret blueprint and sketches To become a part of our team we require applicants for our Metal Fabricator position to have the following qualifications: SKILLS Mechanical aptitude Basic mathematical skills, ability to read a tape measure Effective interpersonal, oral and written communications skills Ability to read blue prints and interpret sign/shop drawings and specifications Ability to multi-task and handle numerous projects simultaneously, time management EDUCATION High School diploma, GED or the equivalent of training, education and experience EXPERIENCE Two years of experience as Metal Fabricator, service or similar industry. Sign industry experience preferred Allen Industries offers all full-time employees competitive pay as well as an excellent benefit package including: medical, dental, vision, paid time off, paid holiday's, supplemental STD, LTD and Life insurance and 401K with company match. General Disclaimer: The duties listed above are intended only as illustrations of the various types of work that may be performed. Other duties may be assigned as needed by the Company. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Allen Industries is an Equal Employment Opportunity, Affirmative Action Employer. We consider applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital, disability or veteran status.

* Lay out patterns and fabricate for sheet metal reducers, square to rounds, laterals, WY's and elbows. (Carbon, galvanized and stainless steel.) * Lay out galvanize ductwork. * Fabricate stainless steel (16 gauge) conveyor hoods and chutes. * Fabricate miscellaneous items such as guards, screens, covers and pans. * Measure, fabricate and install products. * Mentor less experienced fabricators. Qualifications * Must be able to work 8 to 10 hour days. * May be required to work some weekends and holidays. * Tig welding is a plus. What We Offer * Supportive work environment * Opportunity to learn additional skills as well as upward mobility * Eight paid holidays * Start earning two weeks of vacation first year * Company paid life insurance, short and long term disability * 401(k) match of 100% up to 4% Pre-employment drug test required. AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job Description Sheet Metal Fabricator Apprentice Gentry Service Group, located in Swannanoa, NC, is a customer-focused heating and air-conditioning company that was originally started in 1963. We employ highly skilled associates whose goal is to provide the best customer service to Asheville and the surrounding area. We currently have an opening for a Sheet Metal Fabricator Apprentice to join our team. We offer the best pay and benefits. This position requires someone who is a self-driver with strong mechanical skills who can spot problems and find solutions, and someone who holds themselves accountable for a high-quality work product. If this sounds like you, then we'd like you to apply. Schedule: Monday - Friday, 7:00am- 4:00pm with some overtime Compensation: $18.00-$20.00 per hour Benefits: Medical, Dental, Vision, 15 Paid Vacation Days, 9 Paid Holidays, 401k with Company Match, tool account with 0% interest, access to 24/7 chaplain, faith-based organization with a high emphasis on the importance of family.. Primary Job Function: Assist with the fabrication and assembly of custom sheet metal products and equipment, such as ductwork, plenums, fire dampers, diffusers, and more. Assist with receiving in the warehouse and other various duties as assigned. Required Qualifications: Valid driver's license Insurable by company insurance carrier Basic safety knowledge of tools and surroundings Unloading/loading of trucks and in the warehouse Be able to carry 100 pounds unassisted. Demonstrate mechanical aptitude. Prior experience in custom sheet metal fabrication preferred but not required Ability to read a tape measure Exceptional organizational, interpersonal, and communication skills Ability to work independently Safety conscious, dependable, and contribute to our positive environment and culture ***NO PHONE CALLS OR IN-OFFICE INQUIRIES ABOUT THIS POSITION. ALL CANDIDATES MUST APPLY ONLINE ***

Discover your exciting role An entry-level position in a production environment with no prior experience required. In this area you'll form sheet metal into cylindrical and conical products and prep and fabricate stainless steel pipe and fittings for welding and coating. Explore your tasks and responsibilities Under close supervision you'll be introduced to a series of duties and responsibilities with increasing complexity to include, but are not limited to the following: * Set up work area, select and verify the materials for production, and meet daily production and quality demands in such specific areas as: Grinding; Rolling; Seam Welding; and Flanging. * Comply with health, safety (including OSHA), and environmental procedures, and ensures the cleanliness of the area. * Work in a team environment. * Continue to learn and expand one's own capacity within this job by increasing knowledge and skill base. * Perform various other assignments per lead person or supervisor direction. Show your expertise QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Entry-level position with training provided. Minimum high school diploma or equivalent. LANGUAGE SKILLS Ability to read and understand work instructions, technical documents (cut sheets), safety policies, company policies and procedures. Ability to complete written documentation. Ability to effectively communicate with co-workers and superiors. MATHEMATICAL SKILLS Ability to apply basic math skills including adding and subtracting whole numbers and fractions. Ability to accurately read a tape measure to 1/32". PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand and use both hands to finger, handle, or feel. The employee is occasionally required to walk and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderately loud and hearing and eye protection are mandatory. Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact via E-Mail at ********************** Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking employees for our Fabrication division for our Spring Hope, NC shop. The candidate will be responsible for: Fitting and welding materials per fabrication drawings. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in fabrication. Subject to passing a welding or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************

AirClean Systems Job Title: Welder Perform all welding duties under the direction of the Team Lead. Ensure products are assembled efficiently and safely for delivery to final assembly Job Duties Under general supervision, performs assembly operations at a work station or work bench. Uses hand tools, power tools, and measuring devices such as tape measure to perform the following duties: Sanding, Cutting, Drilling, Packaging / Polishing, Material Handling, Weld Preparation. Assembly of new machines, rebuilding old machines, and/or modifications to either. Proficient in assigned welding techniques. Working knowledge of fixturing and weld set up parameters (amps, volts, etc.). Welding equipment maintenance. Read and interpret blueprints, assembly drawings, and part lists to perform required functions. Inspects grooves, angles, and gap allowances, using micrometer, caliper, and precision measuring instruments. Welds components in flat, vertical, or overhead positions using metal or plastic components. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Accountabilities Welding projects are accomplished in a timely manner and timelines are maintained and achieved Quality products are produced in accordance with standards Educational requirements High School Diploma/GED or equivalent Basic math skills Basic problem solving ability Experience level Welding experience a plus, but not necessary Successful completion of an internal welding test Ability to communicate with co-workers and management Terms of employment This is a full-time, hourly, non-exempt position. Hours The general hours shall be either first shift or second shift. First shift operates Monday-Friday, 7:00am to 3:30pm with a one-half hour break for lunch. Second shift operates Monday-Friday, 3:30pm - midnight with a one-half hour break for lunch. Other paid breaks are included for each shift. Work Environment Work is regularly performed in a warehouse environment. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to stand/walk. The employee is occasionally required to sit. The employee must occasionally lift, carry, push or pull up to 80 pounds. The employee must frequently use fine and gross hand motor skills. Travel No travel required. Benefits Compensation package includes 401K plan, Paid Time Off, dental insurance, vision insurance, Teladoc and health insurance after a 90 day introductory period. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.