Fabricator jobs in University Park, TX

The Fabrication & Build Technician's responsibilities include, but not limited to, moving, building, constructing various features, conducting sub-assemblies, and installing equipment intro trailers, box trucks or similar. The incumbent is directed by the Manufacturing Engineer, but works with limited supervision to complete daily tasks. Areas of responsibilities may include but are not limited to: Participate in all facets of new equipment builds, swaps and maintenance. As required, strip, insulate, build walls, install wall finishes, trim, electrical and mechanical fixtures and processes. Verify all shop materials and suppliers are available and ready before starting assignments. Gather and organize parts and equipment required for projects and maintain them in a safe, clearly identified location. Test and ensure all builds are properly functioning prior to customer contact. Generator, compressor installation and report. AC/DC electrical circuit troubleshooting, repair and installation. Fabrication of hydraulic hoses, pneumatic hoses and applicable fittings. Maintain a clean & organized facility ensuring all items are properly identified. Communicate with all team members; advising when supplies are low, tools required, process improvement ides, etc. Assist and back up other(s) and branches as directed. Education, Skills, Experience, and Knowledge High school diploma/GED or equivalent work experience. Must have general mechanical knowledge, carpentry skills, metal working skills and electrical knowledge for basic wiring. Industry specific equipment skills with Spray Foam equipment knowledge a plus. Good interpersonal and external communication skills along with email, texting, etc. Proficiency in Microsoft Office (Outlook, Excel, Word) and ERP systems Work Environment Warehouse/fabrication environment Physical demands may include but are not limited to: Moderate walking, standing, and/or climbing; light lifting and carrying, stooping, bending, kneeling, and reaching. Must be able to lift a minimum of 60 lbs. Travel Light Exemption Status Exempt ** Please note pay will be determined based on prior experience.

**SHEET METAL FABRICATOR (PLTX)** Bowhead seeks an Sheet Metal Fabricator to join our Manufacturing and Products Groupteam in Plano, TX. The Sheet Metal Fabricator must be capable of working in a fast-paced environment and will be responsible for operating, setting up, and adjusting fabrication equipment. **Responsibilities** + Operate, set up, and adjust fabrication equipment (Press brake/Slip rollers/Drill Press). + Manage work in progress and adhering to the shop production schedule. + Ensure all tasks are completed efficiently and safely, meeting customer delivery expectations. + Ensure that all company and industry regulated quality standards are maintained on all fabricated products. + Ensure compliance with production regulations according to the Quality Management System using documentation, maintenance and development. + Ensure welding quality meets company and customer standards on all projects. + Interpret drawings, engineering specs and finish symbols. + Perform accurate calculations and layouts from drawings. + Keep the management team informed on the status of various projects. + Other duties as required. **Qualifications** + High school diploma or GED required, technical certification a plus and a minimum of three to five (3-5) years of custom sheet metal manufacturing experience is required. + Knowledge of LEAN practices considered an asset. + Ability to read and interpret blueprints and engineering fabrication drawings. + Ability to set-up/program press break/rollers. + Must be able read and interpret drawings, with a strong understanding of GD&T principles. + Proven ability to perform all welding and fabrication operations. + Proven ability to organize, prioritize and multi-task. + Strong technical aptitude. + Demonstrate safe work practices. + Intermediate level skills in Microsoft Office software suite - Word, Excel, Outlook, PowerPoint. + Ability to communicate effectively with all levels of employees and outside contacts. + Strong interpersonal skills and good judgment with the ability to work alone or as part of a team. **Preferred:** + IAW ANSI/AWS D1 AND/OR ASME welding certifications. + NAVSEA, OR military equivalent welding certifications. + Tig/Mig welding knowledge. + Knowledge of laser cutting considered an asset. **Physical Demands:** + Must be able to lift up to 25 pounds or more repetitively. + Must be able to stand and walk for prolonged amounts of time. + Must be able to twist, bend and squat periodically. **SECURITY CLEARANCE REQUIREMENTS:** There are currently no Security Clearance requirements for this position; however, candidates must be able to successfully pass a background check. Due to the location of this work, US Citizenship is required. Bowhead reserves the right to change this requirement if necessitated by business needs or contractual obligations. \#LI-JR1 Applicants may be subject to a pre-employment drug & alcohol screening and/or random drug screen, and must follow UIC's Non-DOT Drug & Alcohol Testing Program requirements. If the position requires, an applicant must pass a pre-employment criminal background history check. All post-secondary education listed on the applicant's resume/application may be subject to verification. Where driving may be required or where a rental car must be obtained for business travel purposes, applicants must have a valid driver license for this position and will be subject to verification. In addition, the applicant must pass an in-house, online, driving course to be authorized to drive for company purposes. UIC is an equal opportunity employer. We evaluate qualified applicants without regard to race, age, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other protected characteristics EOE/D/V. In furtherance, pursuant to The Alaska Native Claims Settlement Act 43 U.S.C. Sec. 1601 et seq., and federal contractual requirements, UIC and its subsidiaries may legally grant certain preference in employment opportunities to UIC Shareholders and their Descendants, based on the provisions contained within The Alaska Native Claims Settlement Act. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. Please view Equal Employment Opportunity Posters provided by OFCCPhere (******************************************* . All candidates must apply online at ***************** , and submit a completed application for all positions they wish to be considered. Once the employment application has been completed and submitted, any changes to the application after submission may not be reviewed. Please contact a UIC HR Recruiter if you have made a significant change to your application. In accordance with the Americans with Disabilities Act of 1990 (ADA), persons unable to complete an online application should contact UIC Human Resources for assistance *****************/careers/recruitment/ . The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) UIC Government Services (UICGS / Bowhead) provides innovative business solutions to federal and commercial customers in the areas of engineering, maintenance services, information technology, program support, logistics/base support, and procurement. Collectively, the fast-growing Bowhead Family of Companies offers a breadth of services which are performed with a focus on quality results. Headquartered in Springfield, VA, we are a fast-growing, multi-million-dollar company recognized as a top Alaska Native Corporation providing services across the Department of Defense and many federal agencies. Bowhead offers competitive benefits including medical, dental, vision, life insurance, accidental death and dismemberment, short/long-term disability, and 401(k) retirement plans as well as a paid time off programs for eligible full-time employees. Eligible part-time employees are able to participate in the 401(k) retirement plans and state or contract required paid time off programs. **Join our Talent Community!** Join our Talent Community (************************************************************************ to receive updates on new opportunities and future events. **ID** _2025-24258_ **Category** _Engineering_ **Location : Location** _US-TX-Plano_ **Min** _USD $28.00/Hr._ **Max** _USD $35.00/Hr._ **Clearance Level Must Be Able to Obtain** _N/A_ **Minimum Clearance Required** _N/A_ **Travel Requirement** _Less than 10%_

Job Details Encore Wire McKinney - McKinney, TX Full Time Encore Wire is one of the nation's top copper and aluminum wire manufacturers, outfitting residential, commercial and industrial spaces across the US for a customer base that would blow your mind! Producing over $1 billion of wire every year, with over 1,300 employees and almost 2 million sq. ft. of manufacturing space under our roof, we want to continue our history of growth. Encore is seeking an individual who is looking to join the Maintenance Team. In this role, you will be on the frontlines troubleshooting and maintaining our equipment through our Special Projects Team. Campus Tour - Encore Wire Spirit of Encore ***MUST BE WILLING TO UNDERGO AN ONSITE DRUG SCREEN*** Essential Job Functions: Positioning, aligning, fitting, and welding parts for the formation of sub units or complete units using jigs, hand tools, and welding torches. Identifying information by recognizing similarities or differences, categorizing, estimating, and detecting modifications in events or circumstances. Locating and marking work piece cutting and bending lines, allowing for welding and machine shrinkage, stock thickness and any other component specifications. Providing detailed instructions, specifications, drawings or documentation to explain others about how the components are to be constructed, modified, maintained, assembled, or fabricated. Studying blueprints and engineering drawings to determine project task sequences and requirements. Performs all work in accordance with company safety procedures and in line with OSHA requirements Performs other related duties as required and assigned Experience in stick welding, oxygen/acetylene torch use along with mig/tig experience. Qualifications: High School diploma or G.E.D certificate Ability to read and write the English language Prefer industrial or manufacturing experience working with machine and industrial components Knowledge of the properties and characteristics of metals used for cutting, welding and forming objects and of various welding fluxes and rods Ability to climb in overhead structures, to work beneath machines and in close quarters performing analysis and repair work Exposed to high voltage electricity and excessive heat Ability to push, pull, or lift heavy objects and/or machine parts with or without assistance Work Environment & Physical Responsibilities: Duties are performed in a loud production setting subject to extreme temperatures. Some duties may be required to be performed outside. Comfortable with repetitive movement, kneeling, crouching and stooping. Requires using hands to handle, control, or feel objects, tools or controls. Requires lifting up to 50 pounds while bending, twisting and/or standing. Benefits Details: In addition to stable employment and weekly paychecks, we offer a world-class benefits package that includes medical, dental, vision and life insurance, on-site clinic that your family can utilize, Chaplain services, 401(k) matching (setting you up for retirement), vacation time, Employee Health Fair and company-wide cookouts. Encore Culture - See what our employees think! https://www.encorewire.com/careers/our-culture.html

Brief Description: The Manual Machine Operator is responsible for operating and maintaining manual machinery, including mills, lathes, and other equipment, to produce precision components. This position plays a critical role in ensuring the highest quality standards in manufacturing by adhering to engineering specifications, safety protocols, and company procedures. The Manual Machine Operator works under the direction of and will report to the Manufacturing Supervisor. Detailed Description: * Operate manual mills, lathes, grinders, and other non-CNC machinery to produce precision parts according to technical specifications. * Perform welding and deburring tasks as required to meet product specifications and quality standards. * Interpret and follow blueprints, technical drawings, work orders, and bit documentation to ensure accurate machining and assembly. * Set up and align machinery, ensuring proper tool selection and installation for each job. * Use various measuring equipment, such as calipers, micrometers, and gauges, to inspect and verify dimensions of finished products. * Apply basic mathematical concepts, including geometry and trigonometry, to calculate dimensions and tolerances. * Monitor machine performance and make necessary adjustments to maintain product quality and efficiency. * Maintain a clean and organized personal workstation, ensuring tools and equipment are in good working order. * Follow all safety and quality policies to ensure compliance with company and regulatory standards. * Perform routine maintenance on manual machines to ensure their optimal performance and minimize downtime. * Identify and troubleshoot issues with machines, tooling, or workpieces, escalating complex problems to supervisors when necessary. * Collaborate with team members to identify and implement opportunities for process improvement. * Perform other shop duties as required to support manufacturing operations. Job Requirements: * Proficiency in operating and maintaining manual mills, lathes, and related equipment. * Ability to interpret and work from technical blueprints, schematics, and documentation. * Familiarity with measuring tools and quality assurance processes. * Basic welding and deburring skills. * Strong attention to detail and manual dexterity to handle precision work. * Effective communication and teamwork skills to collaborate with peers and supervisors. * Basic math skills, including geometry and trigonometry, to calculate dimensions and tolerances. * Ability to lift, push, and pull up to 50 lbs. and stand for extended periods. Minimum Qualifications: * High School Diploma or GED. * 6 months of experience operating manual mills and lathes or welding with similar experience. Preferred Qualifications: * Knowledge of machine shop safety standards and best practices. * Familiarity with basic maintenance and troubleshooting of manual machinery. Additional Details: The Manual Machine Operator must work with an emphasis on safety for themselves and others including coworkers and third parties. The typical work environment will be in the shop or field which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals, and airborne particles.

Full-time Description Experienced Commercial Mechanical Welder/Pipefitter - TIG Stainless Steel Fabrication & Hydronic Piping Greater DFW Area - $32-$38/hr | Weekly Pay | Full Benefits | Company Vehicle Are you a TIG-certified stainless-steel experienced mechanical pipefitter/welder who can fabricate/install high-end commercial kitchen systems and new-construction hydronic piping? RLP Mechanical is growing and has year-round work across the DFW metroplex. We're a respected MEP contractor looking for craftsmen who deliver precision, safety, and pride in their welds. Why Work With RLP Mechanical Top Pay: $32-$38/hr based on experience + weekly pay Full Benefits: Medical, dental, vision, life, STD/LTD 401(k) Match: You put in 6%, we put in 4% Company Truck + Gas Card Up to 20 Days PTO + Paid Holidays No Seasonal Layoffs - Steady commercial work all year What You'll Work On Mechanical TIG fabrication / welding of stainless steel for commercial kitchens, food-service equipment, and mechanical rooms Installing and fabricating hydronic piping systems (chilled water, heating hot water, condenser water) Welding, brazing, grooving, threading, soldering, and system layout Reading and interpreting blueprints, isometrics, and piping diagrams Installing pumps, heat exchangers, expansion tanks, valves, and supports Testing, flushing, and commissioning hydronic systems Leading small crews on installs (if experienced) What You Bring 4-6+ years of mechanical pipefitting experience TIG welding certification (stainless steel experience required) Experience working with stainless steel, copper, PVC, HDPE Experience with commercial kitchen installs or hydronic piping Ability to weld to code-quality standards (food service & mechanical) Foreman/lead experience is a plus - or the desire to grow into leadership Valid driver's license and ability to clear background/drug screening Who We Are RLP Mechanical provides high-quality commercial HVAC, hydronics, plumbing, and refrigeration services across the DFW area. We're built on craftsmanship, safety, and respect. Our teams stay because they get steady work, strong support, and a company that values professional tradespeople. Ready to Build Your Career With Us? If you're a skilled commercial stainless-steel TIG welder or hydronic pipefitter who takes pride in clean work and reliable installs, we want to talk. Apply today and join a company that respects your craft. #RLP123

Job DescriptionSalary: Basden Steel Corporation is an AISC certified Steel company based in Burleson, TX. Utilizing our Texas and Oklahoma based plants and coupled with some of the industries most advanced equipment we provide structural steel services for Texas, Oklahoma and surrounding. Our business model, since the company was formed, has always been to deliver a turn-key steel package to our clients. "Seamless Service" has been our consistent motto. Our list of successfully completed projects ranges from Schools, Data Centers, Office, Industrial and Truss Heavy projects. We pride ourselves on our attention to the clients needs and fostering a cooperative effort to successfully complete project after project. When you look at the number of repeat clients we have our success speaks for itself. We are currently seeking to fill the following positions for our Miscellaneous Fabrication Shop. Welders Fitters - Experience in steel fabrication blueprints. Machine Operators - Experience operating CNC driven machines such as plate burning machines and beam line machines Material handlers - This position is responsible for receiving materials using Bill of Ladings and Purchase orders. Must have experience in operating forklifts, and over head cranes. Helpers - Entry level position helping in different parts of the shop. Painters

SOLV Energy is an engineering, procurement, construction (EPC) and solar services provider for utility solar, high voltage substation and energy storage markets across North America. A certified Welder in the solar industry is responsible for performing welding operations to assemble and fabricate solar panels, structures, and components. They work with various materials such as steel, aluminum, and stainless steel to ensure the proper construction and installation of solar systems. : *This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned Position Responsibilities and Duties: Reading and interpreting blueprints, drawings, and specifications to determine welding requirements. Setting up and operating welding equipment, including MIG, TIG, and arc welding machines. Preparing materials for welding by cleaning, cutting, and shaping them as needed. Welding components together using the appropriate welding techniques and methods. Inspecting welded joints and structures to ensure they meet quality standards and specifications. Repairing and modifying existing solar panels and structures as necessary. Collaborating with engineers and other team members to resolve welding-related issues and improve processes. Following safety procedures and wearing protective equipment to prevent accidents and injuries. Maintaining welding equipment and tools in good working condition. Keeping accurate records of work performed, materials used, and time spent on projects. Minimum Skills or Experience Requirements: Strong understanding of construction, welding techniques and practices Excellent attention to detail Manual dexterity Ability to work effectively in a team environment. Certification in welding and relevant experience in the solar industry Solar panel installation experience preferred but can be taught SOLV Energy Is an Equal Opportunity Employer At SOLV Energy we celebrate the power of our differences. We are committed to building diverse, equitable, and inclusive workplaces that improve our communities. SOLV Energy prohibits discrimination and harassment of any kind against an employee or applicant based on race, color, age, religion, sex, sexual orientation, gender identity or expression, marital status, national origin, or ethnicity, mental or physical disability, veteran status, parental status, or any other characteristic protected by law. Benefits: Employees (and their families) are eligible for medical, dental, vision, basic life and disability insurance. Employees can enroll in our company's 401(k) plan and are provided vacation, sick and holiday pay. Compensation Range: $20.00 - $35.00 Pay Rate Type: Hourly SOLV Energy does not accept unsolicited candidate introductions, referrals or resumes from third-party recruiters or staffing agencies. We require all third-party recruiters to communicate exclusively with our internal talent acquisition team. SOLV Energy will not pay a placement fee to any third-party recruiter or agency that has not coordinated their recruiting activity with the appropriate member of our internal talent acquisition team. In addition, candidate introductions or resumes can only be submitted to our internal talent acquisition recruiting team if a signed vendor agreement is already on file and the third-party recruiter or agency has received formal instructions from our internal talent acquisition team to submit candidates for a particular job posting. Any unsolicited candidate introductions, referrals or resumes sent by third-party recruiters to SOLV Energy or directly to any of our employees, or received through our website or career portal, will be considered property of SOLV Energy and will not be eligible for a placement fee. In the event a third-party recruiter submits a resume or refers a candidate without a previously signed vendor agreement, SOLV Energy explicitly reserves the right to pursue and hire the candidate(s) without financial liability to such third-party recruiter. If you're interested in a meaningful career with a brighter future, join the SOLV Energy Team.

United. Inspired. Performance unites us, innovation inspires us, and commitment drives us to keep moving forward. All new thinkers are welcome. We are looking for candidates who want to develop, grow, and dare to think new. Innovation is an important part of our DNA. If you appreciate an environment where you get to think new and constantly evolve, you will thrive here. About us. Epiroc is a global productivity partner for mining & construction customers and accelerates the transformation toward a sustainable society. With ground-breaking technology, we develop and provide innovative and safe equipment, such as drill rigs, rock excavation and construction equipment and tools for surface and underground applications. We also offer world-class service and other aftermarket support as well as solutions for automation, digitalization and electrification. Our global headquarters is based in Stockholm, Sweden and we have around 18,000 passionate employees supporting and collaborating with customers in over 150 countries around the world. Learn more at epirocgroup.com. We succeed in our core business because we are passionate innovators with courage to change. With collaboration and mutual confidence, teams and individuals trust and support each other's abilities to offer solutions. Together, we lead the way to make mining and construction more sustainable. Epiroc offers rewarding experiences and professional growth opportunities. Recognition for your hard work includes: * Benefits eligibility begins the 1st of the month after start date * Health care eligibility - including medical, dental, vision, prescription and telemedicine * Wellness program * Employee discounts * Short and long-term disability insurance * Life and AD&D insurance * Flexible Spending Accounts (FSAs) and Health Savings Account (HSA) * Employee Assistance Program * 401(k) plan * Direct deposit * Tuition reimbursement program * Paid Vacation * Paid Sick Time Join Our Team as an Assembler Welder at Epiroc! Perform all required welding and assigned station assembly operations on drilling rigs following standard and quality assurance methods and within company safety guidelines. Work Type: Onsite Shift Timings: Monday - Friday from 7:00 am - 3:30 pm Principal Responsibilities * Weld components using blueprints * Plan and lay out work from blueprints, drawings, or other written specifications * Install and connect hydraulic controls, pumps, rams, and other system elements * Mount, hook-up and connect engines, gear boxes, axles and other power components and units * Maintain the cleanliness of the assembly area * Detect and report defective materials, faulty operation, and unusual conditions to immediate Supervisor * Select materials and processes to be applied * Set up and adjust equipment * Weld, in vertical, horizontal, flat, and overhead positions to make items of various sizes and shapes * Brazes, flame-cuts, beads, heat treats, pressure, and tack welds * Use hand and power tools of the welding trade * When necessary, use templates in measuring, marking, scribing, and cutting * Follow prescribed safety regulations / guidelines * Maintain work related records and reports * Perform other duties as required or directed Occasional Job Duties * Train new hires * Complete appropriate paperwork for rejected parts * Return leftover parts to Warehouse * Chase parts and fill in necessary paperwork Education & Experience * HS Diploma or GED required * Two years minimum as a welder * Required to read, write and comprehend English * Use and comprehend specifications, blueprints, and schematics * Knowledge of all mechanical components on the rig and their ideal operation * Overall knowledge of product line preferred * Familiar with handling welding and assembly tools * Basic understanding of troubleshooting principles * Knowledge of MFG Pro preferred The training period for this position: * Six months to a year Prior Positions/Training: * Must pass the welding test * Must have training in reading blueprints REQUIRED PHYSICAL EFFORT Moderate physical demand in handling materials and tools while performing welding, assembly and related operations. May be required to lift up to 30 lbs. Work also involves climbing up to 4-6 feet using ladders. Comments: Working Conditions: Some exposure to dirt, oil, and other shop elements Responsibility for Equipment / Process / Material / Product: Handles equipment such as welding machines, torches, grinders, cranes and air impacts. Large damage amounts if equipment is improperly handled. Incorrect assembly can also result in a large loss amount requiring rework and other actions Responsible for meeting the objectives of our ISO programs. When there are any questions regarding these programs they shall be directed to your supervisor/manager or the facility ISO representative. Supervisors and managers are responsible for communicating policy and objectives of ISO programs to their employees. Note: This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the job. Employees are held accountable for all duties of the job. Join us, and be part of a diverse, innovative and highly collaborative team. An inclusive workplace that allows people to thrive. Inclusion is foundational for our Epiroc culture. We want all our people to have a strong sense of belonging. As we work in diverse teams across geographies, cultures, and professional areas, inclusive behavior is something we expect from ourselves and each other. We are continually looking for ways to strengthen our inclusive culture. A place where we all matter. Epiroc's diversity approach is holistic, and our goal is to continue attracting, developing and retaining talented employees from diverse backgrounds, allowing us to benefit from a wide variety of experiences and perspectives. Employment at Epiroc is "at-will," which means that either you or the company can terminate the employment relationship at any time, with or without prior notice, and for any reason not prohibited by statute, in accordance with state and federal guidelines. All employment is continued on that basis. No supervisor, manager or executive of the company, other than the General Manager in a signed writing, has any authority to alter the foregoing. Signature of this document serves as acknowledgment of receipt and does not create a contract of employment. Epiroc is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. United. Inspired. Performance unites us, Innovation inspires us, and commitment drives us to keep moving forward. In the 150 countries where you can find Epiroc, we encourage our employees to take ownership of their own development and careers with the support of their leaders. We are committed to giving you every opportunity to succeed in a culture of innovation, diversity, and collaboration, combined with a caring atmosphere. Diversity and sustainability are key to growing fresh and innovative ideas and solutions for our customers. Epiroc is a leading manufacturer for the mining and infrastructure industries. Learn more at Epiroc.com. #LI-Onsite #LI-PT1 Epiroc is a global productivity partner for mining and construction customers, and accelerates the transformation toward a sustainable society. With ground-breaking technology, Epiroc develops and provides innovative and safe equipment, such as drill rigs, rock excavation and construction equipment and tools for surface and underground applications. The company also offers world-class service and other aftermarket support as well as solutions for automation, digitalization and electrification. Epiroc is based in Stockholm, Sweden, had revenues of more than SEK 60 billion in 2023, and has around 18 200 passionate employees supporting and collaborating with customers in around 150 countries. Learn more at ***************

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings. Must complete Welder Training Program. Must be able to pass and certify 3G and 4G FCAW welding test. Essential Duties: * Ability to plan, organize, pay attention to details and multi-task in a fast paced work environment * Works Independently with minimal supervision once assignments or responsibilities outlined and delegated. Displays a strong sense of ownership for work. * Flexible and Adaptable: Copes with ambiguity, change, and uncertainty effectively. Not hesitant to resolve lack of clarity, structure, or definition of outcomes then moves ahead. * Actively seeks and supports continuous improvement activities in process efficiencies, costs and effectiveness of work * Knowledge of general safety guidelines and Sabre's quality expectations and application in the work place * Manually positions pole assembly in pole rollers into proper position for welding. * Reads and interprets drawings (including weld symbols) and specifications to ascertain proper location of attachments, as well as weld size and configuration. * Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses tables to convert fractions to decimals and decimals to fractions * Adjust welding machines to achieve desired results within parameters of established welding procedures. Frequently pushes, pulls and lifts up to 50 pounds. * Uses oxy-fuel torch to pre-heat parts to be welded in accordance with published welding codes and specifications * Uses MCAW welding process to weld small components or assemblies * Wears protective equipment, including safety glasses, insulated welding gloves, leather sleeves and/or cape, and welding hood * Works in confined areas at various locations on the small pole assembly line as necessary to weld components described above * Uses chipping hammer, wire brush, motorized grinders, and motorized wire brush at various times to clean welded areas. * Uses pneumatic drills and magnetic drills to drill carious size holes on pole assembly as required by drawings and specifications * Visually inspects his/her work to identify material discrepancies and to ensure that welds have been completed satisfactorily in compliance with applicable drawings and specifications. * Uses a weld gauge to measure weld size, standard and metric * Reads and interprets work orders and daily production schedules. * When called upon, assist fitter in assembling pole assembly. Uses measuring tape, level, square, and angle finder to measure distances and angles * Uses oxy-fuel cutting torch and plasma-arc torch for cutting steel. * Operates assembly line conveyor system to move tubular shafts into position for cutting on band saw and for fitting. Operates band saw for cutting tubular shafts according to specifications. * Additional duties as assigned by Supervisor and/or Management. Position Requirements: * High School diploma or GED equivalent preferred * Basic Math skills required * Must be able to read and write. * Ability to read blueprints required * GMAW or Metal Core Welding experience preferred Physical Requirements * Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials. * Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet. * Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times. * Must possess adequate dexterity and stamina to sustain expected production effectively. * Must be able to work in fast-paced work environment * Must be able to lift up to 50 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity

at TPG Pressure Inc Thompson Pipe Group is currently looking for a 2nd Shift Welder Ill. Pay Range: $22.00 - $24.50 per hour depending on experience Schedule: Monday - Friday 3:30pm-2:00am regularly requires weekend work. What We Offer: Top-tier Medical, Dental, and Vision Benefits Benefits eligibility 1st of the month following 30 days of employment Safety Shirts after 90 Day Introductory period Safety prescription eye wear program Safety work wear subsidy after 90 day introductory period Bonus Programs Life and Supplement Life Company Matched 401K Retirement Plan Paid Holidays Fun Events Training and Development Employee Discounts Career Opportunity! Who We are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all of North America. Please visit our website at ************************* This person will be responsible for the interior and exterior of every spirally welded cylinder that enters their designated station for welding defects, base metal defects, and dimensional tolerances and repairs those cylinders to meet specification requirements. Responsibilities Follow all safety rules, policies, and procedures. Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA C200 and additional job specifications as required. Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch. Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed. Performs minor maintenance and repairs to welding equipment and tools. Must properly use tools and care for equipment provided by the company to complete job tasks. Maintain workstation by keeping it clean, organized, free from clutter and trip hazards. Work under general supervision; will report to a crew leader and/or supervisor. Essential Job Functions Must pass 3G weld test with the back gouge and back weld with FCAW process Must be able to weld within criteria. ASME standards. Must be able to maintain a 95% acceptance rate with ASME codes. This position frequently requires standing, sitting, kneeling, stooping, crawling, climbing, use of hands to handle objects, operate controls, and tools. No limits of a range of motion. Able to carry out instructions furnished in written, oral, and verbal form. Must be experienced in flux-core welding, FCAW/ GMAW and SAW is a plus. Must be familiar with standard concepts, practices, and procedures within the welding field. Utilize the flux-core welding process, cutting torch, hand-held grinders, and whatever other tools necessary to complete these repairs. Problem Solving and Innovation: Works well alone and in groups to identify and resolve problems in a timely manner; Meets challenges with resourcefulness and generates suggestions for improving work; Exhibits sound and accurate judgment. Organizational Support: Follows all policies and procedures; Supports organization's goals and values Communication: Listens and gets clarification; Response well to questions; participates in meetings and demonstrates group discussion skills; Writes clearly and informatively; Reads and interprets written information effectively; Presents numerical data effectively. Self-Management Attendance/Dependability/Flexibility There is machinery, moving equipment (cranes, bulldozers, and other moving equipment) and electrical hand tools at the job site Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.) An improperly illuminated or awkward and confining workspace Working above ground level where the possibility of falling exists (i.e. on ladders, rooftops, bucket trucks, scaffolding) Loud (examples: metal can manufacturing department, large earth-moving equipment) Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the job. While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, kneel, or crouch. The employee is repeatedly required to climb vertical ladders. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. The employee must regularly apply 75-foot-pounds of torque in the assembly, dismantling, erection, and installation of various types of structures, tank jig, scaffolding, etc. Regularly swings a 10-pound hammer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. We are located at: 1004 MacArthur Blvd. Grand Prairie, TX

M&M Manufacturing As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. Position Summary The individual will be responsible for assembling and welding different industrial components and pieces according to various plans, as well as repairing and modifying per the needs. Roles and Responsibilities * Weld components in flat, vertical, or overhead * Clamp, heat-bend, bolt component parts to obtain required configurations and positions for welding * Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc and resistance welding * Examine work pieces for defects and measure work pieces to ensure conformance with specifications * Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers * Chip off excess weld, slag, or spatter, using hand scrapers or portable grinders * Analyze engineering drawings, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations * Weld separately or in combination, using aluminum, stainless steel, galvanized steel, and other alloys * Mark or tag material with proper job number, piece marks, and other identifying marks as required * Prepare all material surfaces to be welded, ensuring that there is no slag, rust, moisture, grease, or other foreign matter * Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools * Repair products by dismantling, straightening, reshaping, and reassembling parts, using straightening presses, and hand tools * Set up and use ladders and scaffolding as necessary to complete work * Other responsibilities as assigned Qualifications Education: High School Diploma and/or DEP Experience: Two (2) years of experience or more as a Welder Computer Skills: None required Certificates & Licenses: None required * Read engineering drawings * Perform work with precision and thoroughness * Work at a steady pace and produce quality work * Find a solution or proactively deal with work-related issues * Versatile, autonomous, and responsible * Be a good team colleague * Assess your own strengths and weaknesses * Look for training and development opportunities * Continuously develop knowledge and skills * Share your expertise with others * Proficiency in English communication, both oral and written. Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. Benefit Details Group Health Insurance Company Paid Group Term Life Dental, Vision, Short Term Disability, Long Term Disability, and Critical Care 401k - Eligible day one of employment (Contributions can be from 1% to 50% of salary. Company match of up to 4% quarterly based on safe harbor election) Holidays - 9 per year (Eligible after 30 days of employment) Vacation time Educational Assistance Employee Assistance Program Onsite Clinic - Free medical visits Safety and Attendance incentives Employee Appreciation Days If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

The Company Zurn Elkay Water Solutions Corporation is a thriving, values-driven company focused on doing the right things. We're a fast growing, publicly traded company (NYSE: ZWS), with an enduring reputation for integrity, giving back, and providing an engaging, inclusive environment where careers flourish and grow. Named by Newsweek as One of America's Most Responsible Companies and an Energage USA Top Workplace, at Zurn Elkay Water Solutions Corporation, we never forget that our people are at the center of what makes us successful. They are the driving force behind our superior quality, product ingenuity, and exceptional customer experience. Our commitment to our people and their professional development is a recipe for success that has fueled our growth for over 100 years, as one of today's leading international suppliers of plumbing and water delivery solutions. Headquartered in Milwaukee, WI, Zurn Elkay Water Solutions Corporation employs over 2800 employees worldwide, working from 24 locations across the U.S., China, Canada, Dubai, and Mexico, with sales offices available around the globe. We hope you'll visit our website and learn more about Zurn Elkay at zurnelkay.com. If you're ready to join a company where what you do makes a difference and you have pride in the work you are doing, talk to us about joining the Zurn Elkay Water Solutions Corporation family! If you are a current employee, please navigate here to apply internally. Position purpose The Welder position responsibilities include fitting and joining and repairing metal and other weldable material by applying appropriate welding techniques in accordance with product specifications and production schedules. Responsibilities/Duties/Functions/Tasks * Working hours are general 10:00 p.m. to 6:00 a.m., but may be adjusted as needed to meet production needs * Perform welding duties using a TIG welder. * Use welding equipment to weld steel components as specified by layouts, engineering drawings, work orders, or verbal instructions. * Work with others to assist in the welding of multi-component parts. * Operate forklifts, hoists, hand power tools, slings, grinders, cutting torch, and other hand tools related to the jobs needs. * Inspect and correct welds as necessary to meet product specifications. * Read, understand, and follow job order specifications, engineering drawings, and/or work orders. * Willingness to cross-train and perform the work of other job tasks in addition to the primary assigned position. * Communicates with management, for assignments and to resolve machining or quality issues. * Responsible for keeping equipment and work area clean and orderly and perform basic preventive maintenance functions on equipment. Suggest and implement improvements. * Completes all required safety procedures prior to and during operations. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Qualifications Employee must have: * Ability to follow written and verbal instructions. * Ability to multitask and prioritize in an effective way. * Ability to read a tape measure and caliper. * Ability to operate a forklift. * Ability to read and understand blue prints and other shop drawing aids. * Demonstrated competency in basic shop math, including fraction to decimal conversion skills. * Commitment to quality and accuracy of work performed. * Demonstrated ability to effectively implement or respond to change. * Safety conscious behavior. * Excellent attendance. Work Requirements While performing the duties of this job, the employee is frequently required to: * Lift, carry, push and/or pull heavy weight. * Squat, kneel, bend/stoop, twist/turn, grasp and reach overhead and outward * Stand and walk for 1-12 hours per day for up to 6 days a week. * Work in a non-temperature controlled environment. * Work in a fast paced industrial environment wearing vision and hearing protection and other appropriate protective clothing. Total Rewards and Benefits * Competitive Salary * Medical, Dental, Vision, STD, LTD, AD&D, and Life Insurance * Matching 401(k) Contribution * Health Savings Account * Up to 3 weeks starting Vacation (may increase with tenure) * 12 Paid Holidays * Annual Bonus Eligibility * Educational Reimbursement * Matching Gift Program * Employee Stock Purchase Plan - purchase company stock at a discount! THIRD PARTY AGENCY: Any unsolicited submissions received from recruitment agencies will be considered property of Zurn Elkay, and we will not be liable for any fees or obligations related to those submissions. Equal Opportunity Employer - Minority/Female/Disability/Veteran

MP Materials (NYSE: MP) is rebuilding American industrial capability for a new era of autonomy, robotics, and electrification. We are the only U.S. company with a fully integrated rare earth supply chain-from mining and refining to advanced metal and magnet manufacturing. Our products include both the critical materials used to make permanent magnets and the finished magnets themselves-enabling next-generation technologies in robotics, automation, aerospace, transportation, defense, and energy systems. These materials are the foundation of physical AI-the convergence of computation, movement, and control. We hire ambitious, mission-driven people who want to tackle complex challenges and shape the future of strategic industries. Our culture is rooted in teamwork, resiliency, and integrity, with a deep commitment to operational excellence and national purpose. MP is rapidly evolving from a materials producer into a leading U.S. manufacturer-and our people are driving that transformation. Position Overview: The Fabricator/Welder builds, fits, and installs structural fabrications, equipment frames, guards, platforms, and process piping that support magnet manufacturing operations. This role partners closely with Engineering to interpret drawings, prototype new designs, and deliver high-quality, reliable fabrications on schedule. Success in this role requires expert layout and fit-up, proficiency in multiple welding processes (GTAW/TIG, GMAW/MIG, SMAW; FCAW a plus), strong pipefitting skills, and a relentless commitment to safety and craftsmanship. Position Responsibilities: * Fabricate structural components (skids, frames, mezzanines, platforms, handrails, machine guards) from plate, tube, angle, and channel. * Perform pipefitting and welding on carbon and stainless-steel process lines (butt weld, socket weld, threaded); cut, bevel, prep, fit, and support piping to spec. * Read and interpret fabrication drawings, weld symbols, isometrics, and P&IDs; verify dimensions and tolerances before and during build. * Execute welding using GTAW/TIG, GMAW/MIG, and SMAW across all positions; select consumables, set parameters, and control heat input to meet quality requirements. * Conduct layout and fit-up using jigs/fixtures, squares, precision levels, lasers, and measuring tools to achieve precise alignment. * Cut and form material using oxy-fuel and plasma cutting, band saws, ironworker, press brake, shear, rollers, notchers, and grinders. * Perform in-process and final quality checks (visual inspection, dimensional verification); coordinate NDE as required; complete rework to standard. * Collaborate with Engineering on prototyping and new builds; provide manufacturability feedback, redline drawings, and suggest design improvements. * Rig, move, and install fabrications safely; operate forklifts and overhead cranes; follow proper rigging and signaling practices. * Maintain welding/fabrication equipment; perform basic troubleshooting and preventative maintenance on shop tools. * Complete documentation: redlines, weld maps, material heat/lot traceability (when required), and work order updates; record time and materials in SAP CMMS. * Follow all safety policies including LOTO, hot work permitting, ventilation, confined space protocols, and PPE; actively participate in 5S and housekeeping. * Support planned outages, turnarounds, and urgent repairs; respond to priority work requests to minimize downtime. Basic Qualifications: * High school diploma or equivalent, 4+ years of industrial fabrication/welding experience in a manufacturing, maintenance, or shop environment. * Proficiency in GTAW/TIG (stainless and carbon) and GMAW/MIG; SMAW required; FCAW experience is a plus. * Strong blueprint reading skills including weld symbols; ability to work from isometric drawings and basic P&IDs. * Demonstrated pipefitting ability (takeoffs from isos, offsets, fit-up, and support installation) to meet quality/tolerance requirements. * Competent with layout math and precision measurement tools (tape, calipers, squares, angle finders, levels, lasers). * Safe operation of forklifts, overhead cranes, and common fabrication tools; ability to obtain/maintain certifications. * AWS D1.1 (structural steel) and/or AWS D1.6 (stainless) certifications; ASME Section IX qualifications for pipe a plus. * Experience with sanitary tubing/orbital TIG, vacuum or high-purity gas systems, or cryogenic piping components. * Experience building jigs and fixtures; basic machining (sawing, light mill/lathe ops) for fit-up. * Familiarity with GD&T; ability to interpret tolerance stacks in drawings. * Experience collaborating directly with engineers/designers; comfortable giving manufacturability feedback and executing redlines. * Prior use of CMMS (SAP preferred) for work orders, time, and parts tracking; ability to read bills of material (BOMs). MP Materials is Proud to be an Equal Opportunity / Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. Underrepresented groups/Women/Disabled/Veterans are encouraged to apply. Candidates whose disabilities make them unable to meet the position's requirements will still be considered qualified if they can perform the essential functions of the job with reasonable accommodation. Your Right to Work - In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment verification document form upon hire. For Assistance with Application - Alternative methods of applying for employment are available to individuals unable to submit an application through this site because of a disability. Contact Human Resources Department at ************; dial 7 when prompted for HR; 1700 South Pavilion Center Dr. 8th Floor, Las Vegas, NV 89135 to discuss reasonable accommodation.

Encore Wire is one of the nation's top copper and aluminum wire manufacturers, outfitting residential, commercial and industrial spaces across the US for a customer base that would blow your mind! Producing over $1 billion of wire every year, with over 1,300 employees and almost 2 million sq. ft. of manufacturing space under our roof, we want to continue our history of growth. Encore is seeking an individual who is looking to join the Maintenance Team. In this role, you will be on the frontlines troubleshooting and maintaining our equipment through our Special Projects Team. Campus Tour - Encore Wire Spirit of Encore * MUST BE WILLING TO UNDERGO AN ONSITE DRUG SCREEN*

Job DescriptionDescription: Experienced Commercial Mechanical Welder/Pipefitter - TIG Stainless Steel Fabrication & Hydronic Piping Greater DFW Area - $32-$38/hr | Weekly Pay | Full Benefits | Company Vehicle Are you a TIG-certified stainless-steel experienced mechanical pipefitter/welder who can fabricate/install high-end commercial kitchen systems and new-construction hydronic piping? RLP Mechanical is growing and has year-round work across the DFW metroplex. We're a respected MEP contractor looking for craftsmen who deliver precision, safety, and pride in their welds. Why Work With RLP Mechanical Top Pay: $32-$38/hr based on experience + weekly pay Full Benefits: Medical, dental, vision, life, STD/LTD 401(k) Match: You put in 6%, we put in 4% Company Truck + Gas Card Up to 20 Days PTO + Paid Holidays No Seasonal Layoffs - Steady commercial work all year What You'll Work On Mechanical TIG fabrication / welding of stainless steel for commercial kitchens, food-service equipment, and mechanical rooms Installing and fabricating hydronic piping systems (chilled water, heating hot water, condenser water) Welding, brazing, grooving, threading, soldering, and system layout Reading and interpreting blueprints, isometrics, and piping diagrams Installing pumps, heat exchangers, expansion tanks, valves, and supports Testing, flushing, and commissioning hydronic systems Leading small crews on installs (if experienced) What You Bring 4-6+ years of mechanical pipefitting experience TIG welding certification (stainless steel experience required) Experience working with stainless steel, copper, PVC, HDPE Experience with commercial kitchen installs or hydronic piping Ability to weld to code-quality standards (food service & mechanical) Foreman/lead experience is a plus - or the desire to grow into leadership Valid driver's license and ability to clear background/drug screening Who We Are RLP Mechanical provides high-quality commercial HVAC, hydronics, plumbing, and refrigeration services across the DFW area. We're built on craftsmanship, safety, and respect. Our teams stay because they get steady work, strong support, and a company that values professional tradespeople. Ready to Build Your Career With Us? If you're a skilled commercial stainless-steel TIG welder or hydronic pipefitter who takes pride in clean work and reliable installs, we want to talk. Apply today and join a company that respects your craft. #RLP123 Requirements:

Basden Steel Corporation is an AISC certified Steel company based in Burleson, TX. Utilizing our Texas and Oklahoma based plants and coupled with some of the industries most advanced equipment we provide structural steel services for Texas, Oklahoma and surrounding. Our business model, since the company was formed, has always been to deliver a turn-key steel package to our clients. "Seamless Service" has been our consistent motto. Our list of successfully completed projects ranges from Schools, Data Centers, Office, Industrial and Truss Heavy projects. We pride ourselves on our attention to the clients needs and fostering a cooperative effort to successfully complete project after project. When you look at the number of repeat clients we have our success speaks for itself. We are currently seeking to fill the following positions for our Miscellaneous Fabrication Shop. Welders Fitters - Experience in steel fabrication blueprints. Machine Operators - Experience operating CNC driven machines such as plate burning machines and beam line machines Material handlers - This position is responsible for receiving materials using Bill of Ladings and Purchase orders. Must have experience in operating forklifts, and over head cranes. Helpers - Entry level position helping in different parts of the shop. Painters

at TPG Pressure Inc Thompson Pipe Group - Grand Prairie, TX is hiring Welders. Pay Range: starting at $24.00 Scheduled Shift: Monday - Friday 5:00 a.m - 3:30 p.m. OT and weekends as required. What We Offer Top-tier Medical, Dental, and Vision Benefits Benefits eligibility 1st of the month following 30 days of employment Safety Shirts after 90 Day Introductory period Safety prescription eye wear program Safety work wear subsidy after 90 day introductory period Life and Supplement Life Company Matched 401K Retirement Plan Paid Holidays Fun Events Training and Development Employee Discounts Career Opportunity! Who We are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all of North America. Please visit our website at ************************* Thompson Pipe Group is currently looking for a Welder l. This person will be responsible for the interior and exterior of every spirally welded cylinder that enters their designated station for welding defects, base metal defects, and dimensional tolerances and repairs those cylinders to meet specification requirements. Responsibilities Follow all safety rules, policies, and procedures. Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA C200 and additional job specifications as required. Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch. Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed. Performs minor maintenance and repairs to welding equipment and tools. Must properly use tools and care for equipment provided by the company to complete job tasks. Maintain workstation by keeping it clean, organized, free from clutter and trip hazards. Work under general supervision; will report to a crew leader and/or supervisor. Essential Job Functions: Must pass 3F with FCAW process Must be able to weld within criteria. This position frequently requires standing, sitting, kneeling, stooping, crawling, climbing, use of hands to handle objects, operate controls, and tools. No limits of a range of motion. Able to carry out instructions furnished in written, oral, and verbal form. Must be experienced in flux-core welding, SMAW, SAW a plus. Must be familiar with standard concepts, practices, and procedures within the welding field. Utilize the flux-core welding process, cutting torch, hand-held grinders, and whatever other tools necessary to complete these repairs. Must be able to maintain 85% efficiency or greater Competencies To perform the job successfully an individual should demonstrate the following competencies. Problem Solving and Innovation: Works well alone and in groups to identify and resolve problems in a timely manner; Meets challenges with resourcefulness and generates suggestions for improving work; Exhibits sound and accurate judgment. Organizational Support: Follows all policies and procedures; Supports organization's goals and values Communication: Listens and gets clarification; Response well to questions; participates in meetings and demonstrates group discussion skills; Writes clearly and informatively; Reads and interprets written information effectively; Presents numerical data effectively. Self-Management Attendance/Dependability/Flexibility The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock There is machinery, moving equipment (cranes, bulldozers, and other moving equipment) and electrical hand tools at the job site Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.) An improperly illuminated or awkward and confining workspace Working above ground level where the possibility of falling exists (i.e. on ladders, rooftops, bucket trucks, scaffolding) Loud (examples: metal can manufacturing department, large earth-moving equipment) Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the job. While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, kneel, or crouch. The employee is repeatedly required to climb vertical ladders. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. The employee must regularly apply 75-foot-pounds of torque in the assembly, dismantling, erection, and installation of various types of structures, tank jig, scaffolding, etc. Regularly swings a 10-pound hammer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. EOE/AA - M/F/Vet/Disability Thompson Pipe Group - Pressure is an Equal Opportunity Employer Continue

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset, and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings. Must complete Welder Training Program by passing a GMAW 2G qualification weld test that meets visual and bend testing acceptance criteria. As an applicant, a 2F Evaluation will be administered to determine skillset and knowledge base before being offered the Welder Trainee position. Essential Duties: * Knowledge of general safety guidelines. Sabre specific safety guidelines will be taught on site. * Wears required personal protective equipment (PPE). * Works Independently with minimal supervision on assignments. Displays a strong sense of ownership for work. * Flexible and Adaptable: has the ability to readily switch tasks when directed. * Sabre's quality expectations and application in the workplace will be taught during onboarding and On the Job Training. * Basic understanding of blueprints and weld symbols. * Adjust welding machines within parameters of welding procedure specifications (WPS). * Frequently pushes, pulls and lift up to 50 pounds. * Uses oxy-fuel torch to pre-heat parts to be welded in accordance with welding procedure specifications (WPS). * Uses GMAW welding process to weld small components or assemblies. * Uses chipping hammer, wire brush, and grinders at various times to clean weld joints and finished welds. * Uses magnetic drills to drill various size holes on pole assembly as required by drawings. * Visually inspects his/her work to ensure that welds comply with applicable drawings and code requirements. * Uses a weld gauge to measure weld sizes. Proper usage will be taught during training. * Additional duties as assigned by Supervisor and/or Management as knowledge base increases. * Regular and on-time attendance. * Maintains a positive attitude. * Work in your shift as scheduled * Getting along with coworkers Position Requirements: Education: High School diploma or GED equivalent preferred. Skills & Abilities: * Basic Math skills required. * GMAW (Spray Arc Transfer) welding experience preferred. Physical Requirements: * Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials, up to 50 pounds. * Must possess adequate hand-eye coordination, dexterity and stamina to sustain expected production effectively. * Must be able to work in fast-paced work environment. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Must be able to work in an open environment exposed to extreme temperatures. At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts * Overtime & Per Diem Opportunities Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity Revision 12/30/2024