Fabricator jobs in Woodbury, MN

20805 Eaton Ave Farmington Minnesota 55024-7932 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. We currently have one position open: -1st shift: Monday through Thursday, 5:00 am to 3:00 pm The pay is $26.93 to $30.18 per hour. Essential Functions Be able to identify by sight and give the proper description of the component items used and/or manufactured. Be able to read, understand, and manufacture component parts in accordance with production drawings provided. Be able to properly set-up, operate, and perform routine operator maintenance on special jigs provided for the manufacture of component parts. Be able to safely and skillfully set-up, operate, and perform routine operator maintenance on the following: Milling Machine Drill Press Hand hole Drilling and Tapping Machine Vertical Band Saw Horizontal Band Saw Back Stand Grinder Tube Bender 2-3/8" Diameter Tube Deburrer 2-3/8" Diameter Tube Notcher Tapping Gun Be able to properly inventory processed component parts used and/or manufactured. Be able to use and properly care for the following: Veneer Caliper Ball Micrometer Pitch Micrometer PI Tape Tape Measure Combination Square Level Bullhorn Arm Go-No go Gauge. Other duties as required and/or assigned. Important Details about the Role The employee is responsible for own work. Must be able to work with other employees to complete job. Setup, operate, and perform general maintenance of equipment without difficulty. Make mathematical calculations in preparing product or setting up the machinery. The employee must maintain a safe and productive work environment producing a quality product which is shipped complete and on time to satisfy the needs of the customer. The employee has a direct impact on safety, quality, productivity, TME (total manufacturing expenses), and customer satisfaction. This position reports to the Shift Lead. Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities) The ability to calculate simple mathematics and interpret shop drawings. The ability to recognize and solve practical problems or issues. The ability to work in a team environment with a diverse group of people. The ability to pay attention to detail and follow work instructions . The ability to meet production, safety, and quality standards in a high-paced working environment. One (1) to three (3) years machine shop experience. Operation of CNC Equipment is not required, but preferred. The ability to lift up to 50 pounds, with most frequent lift up to 20 pounds. Read blueprints. Ability to use tape measure. Ability to be Valmont trained and certified in operation of forklift. Wear required personal protective equipment and follow facility safety regulations. Maintain a safe and productive working environment. Highly Qualified Candidates Will Also Possess These Qualifications High School Diploma or GED equivalent. Be knowledgeable in the use of general safety equipment and specific safety equipment relating to machine shop and anchor bolt operations Three (3) to five (5) years of previous experience in a machine shop. The ability to pay attention to detail and follow work instructions The ability to communicate and interact with coworkers in a positive manner Must be a person of passion and integrity who has the drive to excel and deliver exceptional results Must have a high awareness for safety at all times. Educational Background Able to do basic math (addition, subtraction, multiplication, and division and fraction conversion) Able to read and comprehend routings and blueprints Able to use a tape measure Able to use a computer to enter production date, perform time keeping functions, interface with machines and other equipment Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

As a Polisher and Buffer, you will begin by using a hand grinder to smooth out rough edges and polish metal to a pristine finish. You will also cross-train in basic fabrication, where you will cut metal to length using a tape measure, and work with brake presses, spot welding, buffing, and racking for paint. Additionally, you will assist in other departments such as assembly, packaging, and paint as needed. **Responsibilities** + Operate a hand grinder to smooth and polish metal surfaces. + Cross-train in basic fabrication, including metal cutting, brake pressing, and spot welding. + Assist in various departments, such as assembly, packaging, and paint. + Ensure quality and precision in all tasks. **Essential Skills** + Mechanical aptitude through work experience, education, or hobbies. + Experience with sheet metal and grinding. + Proficient measurement skills with a tape measure and basic math understanding. + Experience working with hand and power tools, welding, fabrication, and sheet metal. **Additional Skills & Qualifications** + 6 months of manufacturing experience. + Experience reading a tape measure. + Experience with hand and power tools. + Experience in shop classes such as welding, automotive, woodworking, or machine/tool. **Why Work Here?** This opportunity offers tuition reimbursement, opportunities for upward mobility with potential promotions to lead or supervisor roles, and a $0.50 raise after 90 days. Employees also have the chance for additional raises upon direct hire and the opportunity to certify in welding at Anoka Tech. **Work Environment** The role is based in a large manufacturing facility that operates at a fast pace and can be physically demanding. The environment is not temperature-controlled, which means it can get hot during the summer months. It is a smoke-free campus, and employees are expected to be self-motivated. **Job Type & Location** This is a Permanent position based out of Anoka, MN. **Pay and Benefits** The pay range for this position is $21.84 - $22.09/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Anoka,MN. **Application Deadline** This position is anticipated to close on Dec 12, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Pay Rate: $30.62/Hr. Centuri companies consider several factors when extending an offer, including but not limited to, the role and responsibilities, a candidate's work experience, education, training and skills, and geographic location. Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. Utility Pipeline Welder Helpers are integral members of our Construction Crews. You will support journeyman welders by ensuring tools and workplace are safe, assisting with grinding pipe ends, and cleaning welds. If you have the desire to learn the pipeline welding trade, this is the opportunity for you! What You'll Do * Support Welders with locating, cleaning, and organizing welding tools and supplies * Complete physical labor tasks to help Welders complete their projects * Use grinders to clean pipe ends to be welded and to clean welds throughout the welding process * Use hand torches and pipe beveling equipment to cut material to be fabricated * Assist the crew by performing physical construction labor duties as needed * Maintain all industry required Operator Qualifications * Other tasks as requested by leadership What You'll Have * High School Diploma or equivalent * Valid Driver's License What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training for technical skills * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record is preferred * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Minneapolis

Shape the Future of Packaging with Us Join a global team of 6,900 passionate professionals innovating at the forefront of packaging technology in the pharmaceutical and food industries. At Syntegon, we're more than just a packaging company - we're trusted partners helping customers worldwide deliver life-saving medicines and high-quality food products through cutting-edge, sustainable solutions. From ensuring vaccines are filled with precision and safety, to optimizing the therapeutic delivery of tablets, to sustainably wrapping your favorite chocolates and snacks - Syntegon is behind the brands people trust every day. Now's your chance to be part of something bigger. Apply today and help us build a smarter, safer, and more sustainable world - one package at a time. Why Join Syntegon New Richmond? Located in the scenic city of New Richmond, Wisconsin, Syntegon Packaging Technology, LLC offers: A dynamic, high-tech work environment focused on robotics, precision filling and wrapping equipment, and complex service solutions. A chance to work with a large and advanced installed base of packaging equipment. Easy commuting distance from Minneapolis/St. Paul and Eau Claire, WI. Opportunities for career growth, continuous learning, and making a tangible impact on global health and food safety. Come grow with us and make a difference - in your career and the world. Job Description 2nd Shift: 1:45pm-11:45am (Monday-Thursday/ 4 day/10-hour work week) The Sheetmetal Fabricator is responsible for cutting, forming and finishing sheet metal according to print requirements. This position is for someone who is hands on, detail oriented, and able to work with minimal supervision. Operate safely at all times by following company procedures and alerting management to potential hazards. Fabricate sheet metal parts to specification using forming, cutting, sanding, tapping, and countersinking techniques. Interpret both metric and imperial prints and use precision measuring tools to ensure accuracy and quality. Inspect finished parts for defects and compliance with specifications, performing basic equipment maintenance as needed. Collaborate with the team to maintain a clean, organized workspace and ensure clear communication across shifts. Drive continuous improvement by contributing innovative solutions to reduce cost and lead times for low-volume production. Qualifications Basic Requirements: 1+ years of experience laser cutting and forming sheet metal with an associates or vocational degree in a related technical field OR have an overall combination of at least 3+ years of both education/training and work experience Experience with laser cutting and/or press brake fabrication Can read and interpret engineering drawings, schematics, and computer-generated reports Proficient in the use of imperial and metric units of measure Basic computer proficiency Must be willing to work overtime, as required Preferred Qualification: Experience in a low volume, high mix, manufacturing environment Self-motivated with strong problem-solving skills, efficient management of time and resources, and able to work independently Additional Information The anticipated starting salary for this position is $25 per hour plus a $3.00 hour shift differential Compensation for roles at Syntegon varies depending on a wide array of non-discriminatory factors including but not limited to the specific office location, role, degree/credentials, relevant skill set, and level of relevant experience. Total rewards at Syntegon include salary + bonus (if applicable) + benefits. We Care About Your Well-Being At Syntegon, the welfare of our employees is a top priority. That's why we offer a comprehensive and competitive benefits package designed to support your health, financial security, and personal growth from day one, including: Health Coverage: Medical, Dental, Vision, and Prescription plans starting from your first day. Retirement Savings: 401(k) plan with a generous company match to help you plan for the future. Financial Protection: Employer-paid Short- and Long-Term Disability Insurance, plus Life Insurance for your peace of mind. Career Growth: Education Assistance Program to support your continued learning and development. Work-Life Balance: Paid Time Off to recharge and enjoy your personal time. Support When You Need It: Access to our Employee Assistance Program for confidential counseling and resources. Join Syntegon and enjoy benefits that help you thrive both at work and beyond. Syntegon Technology is a proud supporter of STEM (Science, Technology, Engineering & Mathematics) initiatives: FIRST Robotics (For Inspiration and Recognition of Science and Technology) AWIM (A World In Motion) By choice, we are an Equal Opportunity Employer committed to a diverse workforce. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Turner Industries Group is looking for experienced Welders for maintenance and project work near the Saint Paul, MN area. * Must be able to pass background check and drug screen * Must pass weld test * No per diem or relocation General Job Description: Lay out, fits, and welds fabricated, cast and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe and building and bridge parts. Functional Requirements: Selects equipment and plans layout, assembly and welding; lays out, positions, aligns and fits components together; bolts, clamps, tack welds parts to secure in position for welding; sets up equipment and welds parts; may assemble parts by bolting and riveting; may weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, mig, tig, etc.; may weld pipe, sheet metal, structural steel, brackets or other materials; may repair products by dismantling, straightening, reshaping and reassembling parts; may use cutting torch to cut materials and demo existing assemblies. Qualification Standards: * High school or equivalent * Minimum four (4) years of experience in specified skill * Must be able to pass a weld test before being hired * Must be certified as a welder * Written pre-employment qualification test * Post-offer drug/alcohol screen and physical evaluation * Hazard Communication orientation/test * Turner Industries Group, LLC indoctrination * OSHA approved corrective eye wear (Z87) * Job site orientation * Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) * Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) * Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Tools/Equipment: Employee may be required to provide the following: tool box, crescent wrenches, hacksaw, pipe wrench, set of combination wrenches, striker, tip cleaner, hood, cutting goggles, soap stone holder, welding gloves, set of allen wrenches, tri square, bottle wrench, ball pein hammer, channel locks, rain suit. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction Mental Involvement: May be required to do the following: follow set procedures and standards; follow oral/or written directions; knowledge of federal, state and company standards and regulations; ability to read and write; ability to recognize and report safety hazards etc.; interpret written plans and blueprints; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; ability to communicate with others effectively; ability to work in a team and get along with others; ability to learn new tasks; remember processes, maintain focus, and complete tasks; ability to remain calm under pressure; manage time and expectations across multiple projects; ensure that work is done in a consistent manner and in compliance with directions Work Environment Factors: * Location: industrial maintenance and construction sites, equipment yard and/or fabrication shop * Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas * Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT ****************************************** BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST

Join Schwing America - Where Precision Meets Performance For over 50 years, Schwing America has been a leader in manufacturing top-quality concrete construction equipment. Based in White Bear Lake, MN, we build the machinery that shapes the infrastructure of tomorrow. If you're a skilled welder who takes pride in craftsmanship and quality, we want you on our team. Position Summary: As a Welder, you will operate welding equipment and perform position welding with a high degree of proficiency to meet production requirements. This role demands strict adherence to quality standards and safety procedures. You will work closely with production leads to meet daily welding schedules and maintain our reputation for excellence. Key Responsibilities: Review daily welding production schedules with Production Lead to understand output goals Read and interpret blueprints to identify weld locations, components, and layouts Weld component parts according to prints and product specifications Perform grinding, deburring, and polishing to produce finished, high-quality welds Inspect welds regularly to ensure consistency with company quality standards Repair welds to meet German DIN and AWS D.1.1 standards, including field welding Report any safety, equipment, tooling, or quality issues immediately to supervision Operate barcode scanner and computer systems for tracking labor and work instructions Perform other duties as assigned Qualifications: Technical degree in Welding required Must pass Schwing America welding tests and maintain certification through periodic Quality Control testing AWS D.1.1 certification required Excellent problem-solving and troubleshooting skills Ability to read and interpret blueprints Comfortable using computers to access work instructions and track labor Must pass annual Jager Eye examination Physical Requirements: Work performed 100% inside the plant facility Ability to lift up to 50 lbs. as needed Why Work at Schwing America? Work with state-of-the-art welding equipment in a clean, modern facility Join a company committed to quality, safety, and employee development Competitive wages and comprehensive benefits package Opportunities for career advancement and skills growth Apply today to join Schwing America and weld your future with a trusted industry leader.

**Department:** Production **Electric Machinery Company, a division of WEG Electric Corp.** **Minneapolis, MN** Welder - 2nd shift** **Team: Fabrication Team** ** A Welder is responsible for setting up, fabricating and welding complex parts using various welding processes. A Welder works with a high degree of detail adhering to safety and quality standards. **Major Areas of Accountability:** + Set up and fabricate a wide variety of components using various welding processes, primarily FCAW and GMAW. + Use oxygen-acetylene, oxygen-natural gas, plasma arc and carbon-arc equipment to heat, straighten, trim and bevel ferrous and non-ferrous material. + Read drawings and routings to determine method, sequence of operation, position, tolerances and welding specifications, to include proper filler materials, fluxes and weld machine settings. + Make all necessary layouts and setups using proper tools and fabricating equipment. + Uses portable electric or air driven grinding or chipping equipment. + Perform self-inspection and documentation of welded components. + Provide feedback on rejected welded components, and may determine disposition of rework for rejection report. + Works in other areas of the Fabrication Team skills matrix, may work in other areas fabricating parts and brazing. + Lift and move materials using forklift, pallet jack, overhead crane or jib crane. + Demonstrates a commitment to Continuous Improvement by identifying opportunities in day to day work. + Performs to ISO 9001 Quality Standards and abides to OSHA and EPA regulations. **Knowledge/Skills/Abilities:** + 1-2 year welding degree or High School degree with a minimum of 3 years relevant welding experience. + Must pass a FCAW 3G and GMAW-SC 2G weld test. + Knowledge of layouts, ability to read blueprints, perform basic math and calculate conversions. + Ability to be certified in overhead and Jib crane operation and forklift operation. **Salary** starts at $22 to $26 + $2.00 shift differential **Pay Types** Voluntary weekend overtime. Saturday is paid at time and a half, Sundays are paid at double time! **Job Type** Monday - Friday, 2nd shift 3:30 p.m. - 12:00 a.m. Full-time (Union) **Benefits** + Medical, Dental & Vision Insurance eligible your 1st day on the job + 401K with Match 1st of the month following hire + Quarterly Bonus Program payout potential + Company paid Holidays (13) + Paid Time Off (PTO) accrued + Company paid Short & Long Term Disability + Company paid Life Insurance + Paid Birthday (use anytime throughout the year) + $6,000 annual Tuition Reimbursement program + Company provided tools + Uniforms (laundered), Safety Shoes & Glasses + Secure, onsite free parking **Physical Requirements:** + Routinely lifts and moves objects up to 50lbs. + Occasionally ascends/descends ladders and stairs. + Occasionally works at heights or on platforms. + Routinely positions self in various works spaces, including low, tight or confined spaces. + Routinely remains in a stationary position, often standing or sitting for prolonged periods of time. + Routinely uses repetitive motions including the wrists, hands or fingers to operator machinery or tools. + Occasionally moves from one work station to another to accomplish tasks. **PLEASE, NO AGENCIES** **Company cannot provide sponsorship for this position**

Job Description Job Summary: This position is accountable for performing welding set up, operations and activities. It also must ensure that it demonstrates all core competencies required throughout the organization. These competencies include safety, quality, production, and behavior. Essential Duties & Responsibilities: Welder - Level I Ability to MIG or TIG weld, flat and horizontal position Ability to load and unload a robotic welder. Read and understand part drawing and engineering prints. Use current Manufacturing software accurately (Epicor) Inspect parts as directed by the job inspection level. Follows start of JOB and SHIFT inspections Follows in process inspection requirements and documents to policy and procedures. Ability to inspect part to confirm a good or bad weld. Operate forklift, crane and other material handling operations as required. Consistently exhibits all desired company behaviors and follows company policies, including 5S, Safety and Continuous Improvement. Follows quality policies/standards/procedures. Complete MECR forms [Manufacturing/Engineering Change Request] for standard verification Working knowledge of sheet metal and weld characteristics [penetration, welding settings, etc.] Ability to read and comprehend prints and drawings per level of work. Ensure the overall cleanliness and safety of the immediate work area, as well as surrounding areas. Always provide outstanding internal and external communications. Ability to provide support and assistance to other employees and departments as requested. Perform other duties as assigned. Ability to comply with all company policies and procedures. Professionally communication with other employees, managers, and other Company employees Ability to work independently and collaboratively with others to understand, conceptualize, collaborate, and execute work assignments. Ability to adhere to ISO standards. Ability to follow quality guidelines and procedures while performing inspections on produced parts through use of precision measuring and gauging equipment. Perform secondary welding / grinding as required. Ability to sustain a solid level [Competent] or better performance by meeting productivity and efficiency standards. Perform at a Solid/Full Rating. Meeting requirements in all key responsibilities [safety, quality, productivity, efficiencies, etc.] Ability to work overtime as needed. Regular, reliable, and consistent attendance Additional duties as assigned. Welder - Level II All of Level I essential duties and responsibilities MIG and TIG weld in all positions Set up MIG/TIG Weld Ability to obtain all Tig Certifications (D1.2 and D1.6) Welder - Level III All of Levels I and II essential duties and responsibilities Performing at a rating of exceeding for all key responsibilities of a Level 2 [safety, quality, productivity, efficiencies, etc.] Program and perform preventative maintenance on the robots. Set up robots [change fixtures, load programs] Make minor robot program adjustments. Train others for Level I and II essential duties and responsibilities An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position . Supervisory Responsibilities: N/A Required Skills, Knowledge and Abilities: Knowledge of and ability to efficiently use ERP systems. Ability to be certified in American Welding Society - AWS certification [not all customers require certification] and MIG Certs (D1.1 and D1.3) within two months of hire. Education and Experience: Minimum requirements for Welder - Level 1: High school diploma or general education degree [GED]. 1 year of vocational training or 1 year of relevant work experience. Lead Requirements Minimum 3 years' experience in: MIG, TIG, and Finishing welding. Ability to prioritize and assign work to other welders. Demonstrated experience in process and personnel improvement activities. Physical Job Requirements Frequent and Sustained Walking-Frequently Bending-Frequently Stooping /Squatting --Occasionally Frequent and extensive use of hands and arms-Frequently Lift/Carry up to 50 lbs.-Occasionally. Pushing/Pulling up to 50lbs - Occasionally. Reach at or above shoulders - Occasionally. Reach at or below shoulders - Occasionally. Sitting -- Occasionally Exposure to moving mechanical parts. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is moderate to high. The job duties outlined above are not intended to be a detailed list of job functions or responsibilities. It outlines the essential functions of the job. An individual may be required to perform other duties from time to time. The company reserves the right to amend, change or delete the contents of this description. Monday-Thursday 5:00am-3:30pm

Trystar is a leader in power distribution equipment and related services at the heart of supporting our electrical infrastructure. Our team members focus on producing the highest quality products in the industry and providing industry-leading service. Whether based in our state-of-the-art headquarters in Faribault, MN , our corporate office in Burnsville, MN, or a member of our team out in the field, safety and integrity are our guiding principles, and we work together to achieve excellence for our customers every day. Trystar's team members are our most important asset, we are in search of a Welder I for our cable line. This position plays a critical role in achieving our strategic objectives. Trystar's Welder I position is an important part of Trystar's plan to become the world's foremost custom solution provider. The Welder I is a skilled professional responsible for performing Tungsten Inert Gas (TIG) welding on aluminum components. They play a critical role in the fabrication process, using their expertise to produce high-quality welds that meet engineering specifications and industry standards. We are looking for people who believe in our guiding principles and values of: Safety - We believe everyone should leave Trystar facilities in the same or better condition than when they arrived. Integrity - We're honest, transparent, and committed to doing what's right. Customer focus - We have relentless focus on our customers and their success. Right with speed - We use good judgement, make thoughtful decisions quickly, and execute them with purpose and intensity. Play for each other - We're a team. We show up for each other and we know that through teamwork we achieve greatness. Champion change - We know adaptation and improvement are requirements to survive and to thrive. Enjoy the journey - We create an environment where our team feels appreciated and has fun along the way. In this role you will get to: TIG Welding: Perform TIG welding on aluminum materials, utilizing precise heat control and filler metal to create strong and aesthetically appealing welds. Weld Preparation: Clean and prepare aluminum surfaces for welding, removing any contaminants or impurities that could affect the quality of the weld. Material Inspection: Examine and verify the integrity of aluminum materials to ensure they meet the required quality standards before welding. Welding Parameters: Set up and adjust welding equipment, including selecting the appropriate TIG welding torch, gas flow, and amperage, based on the thickness and type of aluminum being welded. Weld Quality Control: Inspect finished welds for defects and discontinuities, using visual inspection and non-destructive testing methods as required to ensure the product being manufactured is meeting required specifications. Welding Joints: Work with a variety of welding joint configurations, such as butt joints, lap joints, and fillet welds, depending on the project's specifications. Safety Compliance: Adhere to all safety guidelines and protocols while performing TIG welding, ensuring compliance with company and industry safety regulations. Work Environment: Operate in various work environments, including workshops, fabrication facilities, or construction sites, depending on project requirements. Material Handling: Safely handle and move aluminum materials and welded components during the welding process. Production Monitoring: Monitor the manufacturing process to maintain a steady workflow and promptly address any deviations or inefficiencies. This also includes daily production reports, tally sheets, scrap reports, etc. Must be able to understand the job orders and interact with Epicor. Documentation: Accurately record production data in Epicor, machine settings, and maintenance activities to maintain production records and assist in process improvement efforts. Collaboration: Collaborate with other team members, including supervisors, fabricators, and quality control personnel, to ensure efficient workflow and adherence to project timelines. Process Improvement: Continuously seek opportunities to improve machining processes, reduce cycle times, and enhance overall efficiency while maintaining high-quality standards. Read, comprehend, and execute processes and procedures according to the Standard Operating Procedures (SOP's) which are necessary to properly operate the equipment and manufacture the product. Equipment Maintenance: Maintain and operate hand tools necessary to set-up, take apart, troubleshoot, and to operate equipment. Perform routine maintenance on welding equipment, including cleaning, lubricating, and inspecting components to ensure proper functioning and extend equipment lifespan. Perform other projects and duties as assigned. Job Requirements: BASIC QUALIFICATIONS Must have experience in primarily TIG welding and MIG welding. Proficiency in TIG welding techniques, particularly on aluminum materials, to produce high-quality welds with minimal defects. Ability to read and interpret welding symbols, blueprints, and engineering drawings. Familiarity with different grades and types of aluminum and their corresponding welding requirements. Two years of experience working in a manufacturing environment. Weld components in flat, vertical, and overhead positions. Assess welded surfaces, structures and components to identify errors. Weld small and large components such as steel tubing, aluminum, and stainless steel. Must be able to read, write and comprehend plant directives written in English. ADDITIONAL QUALIFICATIONS High school diploma required, and technical secondary education is preferred. Perform simple mathematics to comprehend and interpret process sheets, SOP manuals, tally sheets, etc. and to keep accurate account of materials used during manufacturing process including scrap amounts. Physical strength sufficient to lift and carry up to 50 pounds on an intermittent basis Frequent lifting, standing, bending & reaching required Able to pass a pre-employment physical and drug test Must adhere to all the PPE requirements to perform the job safely, this includes but is not limited to, Eye, Hand, Feet, and Hearing protection Benefits: 401 (k) with company match Medical Insurance Dental Insurance Vision Insurance Disability Insurance PTO Sick Time Employee Appreciation Time Paid Holidays Trystar is an Equal Opportunity Employer and is committed to creating a diverse and inclusive environment. We consider all applicants for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, age, disability, marital status, veteran status, or any other characteristic protected by law. We are committed to providing equal opportunities for all individuals and to fostering a workplace that values diversity, equity, and inclusion.

Full-time Description (Employment/staffing agencies - please do not reach out about this ad. We only hire direct.) Job Title: Rack & Tool Maker (Welder/Fabricator) / Maintenance Technician- Experienced Company/Location: Nico Products / Minneapolis MN Shift: 6:00am-2:00pm Monday-Friday + OT as scheduled. Wage: $28.50/hour + DOQ This position is specific to the Production/ Industrial/ Manufacturing trade. Please make sure to read the entire ad, and if your skills meet these requirements, then apply. Pivotal position to our success. Things to consider prior to applying: The Company follows strict security protocols that include securing (lock up) personal mobile devices and access is only allowed during authorized breaks and in authorized areas. Attendance is critical to our success and it is tightly managed. Manufacturing is necessary for the overall economic health of our country. Become part of an industry that finishes critical parts for the medical field (respirators, etc.), aeronautics (airplane parts), military, to everyday items like nuts and bolts, etc. We play an integral part in many of the products we all use every day. Every employee plays an important role in our success. Many advancement opportunities from department leads, platers, maintenance, chemical lab, wastewater treatment, supervisor, quoting, to upper management. It all depends on your effort and interests. We are looking to expand our team and continue our mission of excellent service and on-time delivery. Reviews are conducted twice a year, including a rate increase if expectations are met. Great benefits package and fringe benefits. Hiring ASAP, apply TODAY. ____________________ Position Duties: The Rack & Tool Maker is responsible for fabricating, modifying, maintaining, and repairing metal racks, fixtures, jigs, and tools used in production processes. This role supports production efficiency, ensures parts are held or plated correctly, and contributes to the continuous improvement of manufacturing tooling systems in a high-security environment. Will work with other Maintenance Department employees towards ensuring the smooth operation of all machinery and equipment used in the plating/ manufacturing process. What are we looking for? The following duties and requirements can help determine if you are a good fit for us, and if we are a good fit for you. Attendance is CRITICAL to our success and need people that are committed to being at work, as scheduled. DUTIES: Upholds company policies and procedures Reads Work Orders/Repair Orders Design, build, and repair custom racks, fixtures, and tools based on blueprints, verbal instruction or production needs. Collaborate with engineers, production staff, and quality assurance to develop efficient and ergonomic tooling solutions. Perform metal fabrication tasks including cutting, welding, grinding, drilling, and assembly. Modify or repair existing racks and tooling to meet updated part designs or process changes. Conduct quality checks on tools and fixtures to ensure precision and durability. Maintain a clean and organized work area, ensuring compliance with safety and security protocols. Reads Work Orders/Repair Orders• Assist in the Maintenance Department as directed. Follow all safety protocols and regulations, including Lockout/Tagout (LOTO), to maintain a safe work environment Participate in continuous improvement initiatives and lean manufacturing activities• Other duties and responsibilities as assigned. Other duties and responsibilities as assigned SKILLS REQUIRED: High school diploma or GED 2 -5 years experience in tool making, fabrication, or industrial rack manufacturing Certification in machining, metal fabrication, or welding Ability to maintain a regular and reliable attendance record Fluently read, write, speak, and understand the English language Must be a US citizen or have authorization to work in the US Must be able to read a ruler/tape measure and analog clock Ability to pay attention to detail and follow written instructions Good organizational skills and the ability to follow instructions Basic math and geometry Proven welding knowledge/experience Ability to read and interpret blueprints, schematics, and technical drawings Strong problem-solving skills and the ability to work independently or as part of a team Excellent time management and organizational skills Knowledge of safety regulations and practices in an industrial setting Comfortable with computers, tablets, and some knowledge of MS Office WE PROVIDE OPPORTUNITIES FOR GROWTH & ADVANCEMENT! AS A TEAM MEMBER, YOU'LL ENJOY: Employee paid benefits: Medical, Dental, Vision, FSA, Legal/ID Theft, Pet, 401k Company paid benefits: Medical premium portion, Wellness Program, Life Insurance, Short Term Disability, Long Term Disability, 401k contribution Paid Holidays Paid Time Off and Sick & Safe Time Quarterly bonus (profit sharing) Attendance Rewards (bonus) Performance reviews twice a year (Reviews: 60 days and 6 months, then twice a year, which may come with a rate increase, providing the employee meets company and performance standards). Work Anniversary Paid Day Off Employee Referral Program Career Advancement Company Paid Safety Boots Company Paid Prescription Safety Glasses Company Paid Uniforms, and More! ____________________ Shift & Wage: *6am - 2pm, Monday - Friday ( + OT as needed) $28.50/hour+ DOQ * = Actual hours subject to change. (Reviews: 60 days and 6 months, then twice a year, which may come with a rate increase, providing the employee meets company and performance standards) Signing Bonus: $1500 (current employees are not eligible for signing bonus) APPLICATION PROCESS: Upload a current resume & answer the questions provided (completing this task provides a little insight into you and helps us determine the best candidates to interview). No need to reach out and verify if the application was received. If you receive an email/text response when you submitted the application, then you'll know it was received. If you are selected for an interview, you will be contacted via email. ( As part of our selection process, while onsite for an interview, you MUST PASS A BASIC MATH TEST within 10 minutes to move on to the interview phase.) Expect a response within 14 days of your application. ____________________ Requirements Security: This position operates within a secure manufacturing facility. All employees must adhere to strict security policies, including restrictions on personal electronic devices, access control, and documentation procedures. Equal Opportunity Employer. The Lindgren Group, including Avtec Finishing and Nico Products, is an equal opportunity employer and is committed to creating an inclusive environment for all employees. Veterans are encouraged to apply! Work Authorization / Security Clearance: The Lindgren Group must comply with ITAR (International Traffic in Arms Regulations). These regulations may restrict persons of non-US citizen status from working/participating/observing/or other forms of gathering knowledge about certain activities within the company. Disclaimer: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice. For more information on our company, visit:************************

We are currently looking for a Plastic Welder to join our team at Apollo (an Apex Water and Process Inc. company) at our Chanhassen, MN, location! This is a full-time, hourly, non-exempt position offering a complete benefits package, including competitive PTO, 401K with a company match, health, dental, vision, disability and life insurance. New, full-time employees start accruing PTO right away and are eligible for benefits within 31 days or less. We also offer a clean, bright and safe work environment! Apply today and take the first step in working for a company where your contributions and career development truly matter! ABOUT APEX WATER AND PROCESS INC. Apex Water and Process Inc. (***************** is a comprehensive provider of fabrication, as well as water and process solutions, for industrial and agricultural markets with enterprise-level partnership and customer service. As a vertically-integrated parent company to six outstanding regional brands, Apex is uniquely positioned to meet all our clients' fabrication, chemical, equipment, engineering and service needs efficiently and effectively. We are a fast-growing, dynamic company with a strong, supportive culture that offers many opportunities for career development and advancement, and we are always looking for passionate, dedicated individuals to join our team to help us continue to strive for excellence as we provide valuable, innovative solutions for our customers! Job Description JOB SUMMARY: The primary objective of the Plastic Welder position is to fabricate plastic assemblies according to print specifications in a timely manner to meet customer requirements and the production schedule. This includes fabricating standard parts, as well as custom parts, building complete products, and inspecting the work performed to meet internal and external requirements. JOB DUTIES: Fabricate plastic piece parts, turntables, cabinets, and fusion assemblies, and perform solvent welding and other tasks as assigned Read and interpret technical drawings and schematics to determine fabrication requirements Select and prepare plastic materials for welding, ensuring they are clean and free from defects Operate hand and power tools, such as grinders and cutters, to shape and trim plastic components as required Inspect components to ensure they meet quality standards and make any necessary adjustments Perform secondary machining operations as required Help to ensure the products we manufacture meet or exceed customer quality expectations Ensure adherence to production schedules to ensure on-time deliveries, working closely with production scheduler Take the initiative to identify and implement improvements to our processes along with the products we deliver Follow all safety procedures, along with 5S standards Participate as an active team member and be willing to cross-train as required (i.e. machining and assembly areas) Train and assist others as required Adhere to and follow all Company policies Other duties as assigned Qualifications QUALIFICATIONS: High school diploma or equivalent Certificate or diploma in welding or related field or equivalent work experience in welding/fabrication Ability to work independently with minimal instruction and supervision and effectively plan, organize, and execute own activities Ability to communicate clearly and professionally with customers, vendors and colleagues Ability to read and interpret technical prints and drawings without assistance Ability to read and understand Safety Data Sheets Ability to wear personal protective equipment necessary for duties performed Ability to use hand and power tools Ability to weld in all positions and work with all types of plastic materials Ability to lift 50 pounds unassisted and over 50 pounds with assistance Ability to work well with others and take direction and feedback Strong attention to detail and ability to problem-solve Willingness to work overtime when required Additional Information An offer of employment at Apollo is subject to a pre-employment drug screen, physical and background check. Apollo is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Job Description The complex fitter and welder is a skilled professional responsible for welding together metal components or parts to repair or fabricate products according to blueprints, layouts, or work orders using various welding techniques. This individual is highly independent in being able to take parts, models, and prints. Hours: M-F, 5AM-1PM VALUES Innovation Commitment & Passion Integrity Team & Relationships DUTIES AND RESPONSIBILITIES Reading and interpreting blueprints, drawings, and specifications to determine the appropriate welding process. Selecting and setting up welding equipment, including choosing the correct welding method. Cleaning and preparing metal surfaces for welding, ensuring proper fit and alignment of parts. Welding components using manual or semi-automatic welding equipment in various positions (flat, vertical, horizontal, overhead). Monitoring the welding process to avoid overheating, distortion, or other defects. Inspecting welded joints to ensure they meet quality standards and specifications. Performing post-welding tasks, such as cleaning, grinding, and polishing, to smooth welds and remove any defects. Maintaining welding equipment and ensuring it is in good working condition. Following safety guidelines and procedures to prevent accidents and injuries. Collaborating with engineers, fabricators, and other team members to meet project requirements and deadlines. ATTRIBUTES Focused on quality. High attention to detail. Able to work with minimal supervision. Able to handle multiple tasks. QUALIFICATIONS Welding and fitting certification is preferred.

H2O innovation is a smart water treatment solutions company. We simplify water treatment by integrating state-of-the-art technologies to solve water challenges for good with our team of trusted experts. Our mission is to provide services on an international scale, in a people-oriented, caring environment that fosters professional and personal growth. Be part of our talent pool and grow with H2O. The TIG Welder/Assembler will hold a permanent & full-time position and will work for the Ramsey, MN plant. For this position, welding will not be required every day and can vary depending on the type of project. You will be asked to perform a wide variety of assembly tasks and opportunities to learn new skills. The Benefits Overall remuneration including: Profit sharing bonus program; Group Insurance plan including dental, vision & telemedicine; 401K plan with employer's contribution; Three (3) weeks of accrued vacation & five (6) wellness days; Eleven (11) paid statutory holidays. The Day-to-Day TIG welding stainless steel pipes; Weld and Assemble pipes, equipment, instruments and valves to frame structures; Welding structural frames per AWS and welding SS pipe per ASME; Glue PVC pipe and fittings; Measuring, cutting, drilling, tapping and mechanical assembly; Layout and follow direction on running conduit to devices; Thread and cut rigid metal conduits; Respect the product planning timescale; Respect and follow safety regulations; Ensure a good quality product; Support process improvements; Maintain the work area and equipment in a clean and orderly condition; Carry out all other related tasks. The Skills We Are Looking for A minimum 3 years of welding experience; Ability to read technical plans; Personal tools; Candidates will be required to pass a 6G weld test; Good memory and capable of multi-tasking. #ZR #Projet (WTS)

Are you a seasoned curtainwall designer looking to take the next step in your career? Enclos is seeking a skilled and motivated Fabrication Lead to join our engineering team and help drive excellence across some of the most complex facade projects in the industry. This is a key lead role for someone who thrives at the intersection of design, fabrication, and technical problem-solving-guiding project drawing packages, mentoring designers, and ensuring quality at every stage. If you're ready to use your expertise to influence project outcomes and help shape the next generation of curtainwall talent, we'd love to connect. Position Overview: The Fabrication Lead position at Enclos is a highly technical and hands-on role responsible for guiding a team of curtainwall designers and technicians through the full lifecycle of project design. This role oversees quality assurance and drafting standards, coordinates complex project drawing packages, and serves as the critical link between design intent and fabrication, assembly, and installation. The Fabrication Lead mentors junior team members, provides technical guidance, identifies design changes, and supports collaboration with engineering, field, and fabrication teams. This position requires advanced drafting experience, proficiency in CAD and modeling tools, and the ability to lead, problem-solve, and communicate effectively across project stakeholders. Essential Duties and Responsibilities: * Trains and mentors Curtain Wall Technicians, Designers I, and Designers II. * Oversees and coordinates Quality Assurance/Quality Control policies for engineering team subordinates. * Coordinates a portion of a projects drawings (plans, elevations, details, embeds, layouts, tag, unit, parts, take-offs, 3D, dies, etc.) * Identifies design and scope changes and communicates changes to System Designer. * Identifies requests for information (RFI's) re: design and scope changes. * Assists in reviewing and interpreting rough sketches, drawings, specifications, and other engineering requirements received from Professional Engineer, and helps to ensure that revisions are incorporated into the production, fabrication, and field drawings. * Understanding the design impact through the lifecycle of a project. Can anticipate how the design will be fabricated, acquired, assembled, shipped, and installed. * Provides feedback regarding project to System Designer or TPM. * Participates in mock-up activities (fabrication, assembly, and testing) as required by the Operations Project Manager. * Participates in performance reviews of engineering team subordinates. * Reads and interprets project architectural drawings and specifications to determine best systems, designs and components to be used for production drawings. * Interprets project specifications, contract, cost estimate, and contract drawings. * Accurately evaluates time required to complete an assignment. * Ensures that assigned team complies with company policies regarding CAD and drafting standards, as well as safety and security procedures. * Provides assistance to field, shop, or vendors. Qualifications: * Associate's degree in Architectural Drafting, Engineering, or related field. * 5-10 years of curtainwall drafting experience. * Ability to coordinate a small group of subordinates, and delegate work as needed. * Ability to communicate effectively both orally and in writing. * Ability to use CAD, Word Processing, spreadsheet, Email and Internet software. * Proficiency in at least two of the following programs: AutoCAD, Revit, Inventor. * Ability to perform and/or coordinate work of subordinate team members (Curtainwall Technician, Designer I & Designer II) within a project. * Ability to solve problems involving several well-defined variables in standardized situations. * Knowledge of advanced drafting techniques and modifications of theories, precepts, and practices of the curtainwall field. COMPENSATION At the Enclos Family of Companies, compensation is determined based on several factors including but not limited to work experience, education, geographic location, certifications, etc. Your recruiter can share more about the specific compensation package for your preferred role during the hiring process. The successful candidate for the Fabrication Lead role in Minneapolis, MN can expect to earn $65,000 to $85,000 per year. This position is also eligible to participate in the company's incentive bonus plan. Benefits include, and are not limited to: * 401(k) plan with company match * Medical, dental, prescription, vision coverage * Tax-advantaged accounts for healthcare expenses * Flexible time off and paid holidays * Paid parental leave * Career growth and nationwide career opportunities Equal Opportunity Employer Enclos Corp is committed to providing equal employment opportunity to all applicants and employees regardless of their race, creed, color, religion, sex, age, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state or local law. We are strongly committed to this policy and believe in the concept and spirit of the law. Enclos Corp is further committed to ensuring that employment decisions are based on valid job requirements. In addition, all employment actions, such as recruiting, hiring, training, promotion, compensation, benefits, transfer, layoff, and termination are administered fairly to all persons on an equal opportunity basis, without discrimination based on the protected categories named above. Enclos Corp will also provide qualified applicants and employees with disabilities reasonable accommodations, if possible, as required by law.

20805 Eaton Ave Farmington Minnesota 55024-7932 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. ***1st Shift Position Available*** Starting at $26/hr. Essential Functions Be able to identify by sight and give the proper description of the component items used and/or manufactured. Be able to read, understand, and manufacture component parts in accordance with production drawings provided. Be able to properly set-up, operate, and perform routine operator maintenance on special jigs provided for the manufacture of component parts. Be able to safely and skillfully set-up, operate, and perform routine operator maintenance on the following: Milling Machine Drill Press Hand hole Drilling and Tapping Machine Vertical Band Saw Horizontal Band Saw Back Stand Grinder Tube Bender 2-3/8" Diameter Tube Deburrer 2-3/8" Diameter Tube Notcher Tapping Gun Be able to properly inventory processed component parts used and/or manufactured. Be able to use and properly care for the following: Veneer Caliper Ball Micrometer Pitch Micrometer PI Tape Tape Measure Combination Square Level Bullhorn Arm Go-No go Gauge. Other duties as required and/or assigned. Important Details about the Role The employee is responsible for own work. Must be able to work with other employees to complete job. Setup, operate, and perform general maintenance of equipment without difficulty. Make mathematical calculations in preparing product or setting up the machinery. The employee must maintain a safe and productive work environment producing a quality product which is shipped complete and on time to satisfy the needs of the customer. The employee has a direct impact on safety, quality, productivity, TME (total manufacturing expenses), and customer satisfaction. This position reports to the Shift Lead. Required Qualifications of Every Candidate (Education, Experience, Knowledge, Skills and Abilities) The ability to calculate simple mathematics and interpret shop drawings. The ability to recognize and solve practical problems or issues. The ability to work in a team environment with a diverse group of people. The ability to pay attention to detail and follow work instructions . The ability to meet production, safety, and quality standards in a high-paced working environment. One (1) to three (3) years machine shop experience. Operation of CNC Equipment is not required, but preferred. The ability to lift up to 50 pounds, with most frequent lift up to 20 pounds. Read blueprints. Ability to use tape measure. Ability to be Valmont trained and certified in operation of forklift. Wear required personal protective equipment and follow facility safety regulations. Maintain a safe and productive working environment. Highly Qualified Candidates Will Also Possess These Qualifications High School Diploma or GED equivalent. Be knowledgeable in the use of general safety equipment and specific safety equipment relating to machine shop and anchor bolt operations Three (3) to five (5) years of previous experience in a machine shop. The ability to pay attention to detail and follow work instructions The ability to communicate and interact with coworkers in a positive manner Must be a person of passion and integrity who has the drive to excel and deliver exceptional results Must have a high awareness for safety at all times. Educational Background Able to do basic math (addition, subtraction, multiplication, and division and fraction conversion) Able to read and comprehend routings and blueprints Able to use a tape measure Able to use a computer to enter production date, perform time keeping functions, interface with machines and other equipment Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************.

Turner Industries Group is looking for experienced Welders for maintenance and project work near the Saint Paul, MN area. Must be able to pass background check and drug screen Must pass weld test No per diem or relocation General Job Description: Lay out, fits, and welds fabricated, cast and forged components to assemble structural forms, such as tanks, pressure vessels, furnace shells, pipe and building and bridge parts. Functional Requirements: Selects equipment and plans layout, assembly and welding; lays out, positions, aligns and fits components together; bolts, clamps, tack welds parts to secure in position for welding; sets up equipment and welds parts; may assemble parts by bolting and riveting; may weld pipe such as carbon steel, stainless steel, chrome, etc. by process of arc, heliarc, gas, mig, tig, etc.; may weld pipe, sheet metal, structural steel, brackets or other materials; may repair products by dismantling, straightening, reshaping and reassembling parts; may use cutting torch to cut materials and demo existing assemblies. Qualification Standards: High school or equivalent Minimum four (4) years of experience in specified skill Must be able to pass a weld test before being hired Must be certified as a welder Written pre-employment qualification test Post-offer drug/alcohol screen and physical evaluation Hazard Communication orientation/test Turner Industries Group, LLC indoctrination OSHA approved corrective eye wear (Z87) Job site orientation Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Tools/Equipment: Employee may be required to provide the following: tool box, crescent wrenches, hacksaw, pipe wrench, set of combination wrenches, striker, tip cleaner, hood, cutting goggles, soap stone holder, welding gloves, set of allen wrenches, tri square, bottle wrench, ball pein hammer, channel locks, rain suit. Physical Involvement: Employee may be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds structures, etc.; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction Mental Involvement: May be required to do the following: follow set procedures and standards; follow oral/or written directions; knowledge of federal, state and company standards and regulations; ability to read and write; ability to recognize and report safety hazards etc.; interpret written plans and blueprints; applying basic mathematical skills; planning work and selecting proper tools; comparing and understanding differences in the size, shape and form of lines, figures and objects; picturing and evaluating solid objects from drawing or diagrams using standards that can be measured or checked; ability to communicate with others effectively; ability to work in a team and get along with others; ability to learn new tasks; remember processes, maintain focus, and complete tasks; ability to remain calm under pressure; manage time and expectations across multiple projects; ensure that work is done in a consistent manner and in compliance with directions Work Environment Factors: • Location: industrial maintenance and construction sites, equipment yard and/or fabrication shop • Mobility Barriers to Access Job Site: uneven ground level; obstructed pathways; work performed at low and/or high elevations; work performed in confined areas • Climatic/Environmental Conditions at Job Site: predominately outdoor climate; may be exposed to extreme hot or cold weather, excessive humidity, rain, etc.; various noise levels caused by tools, machinery, equipment, etc.; potential exposure to chemical substances Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. SPECIAL WARNING: PLEASE BE AWARE THAT YOU WILL NOT HAVE TO PAY FOR THIS DRUG/ALCOHOL TEST. PLEASE DO NOT SEND MONEY OR ANYTHING OF VALUE TO PERSONS WHO STATE THAT YOU HAVE TO PAY ANY AMOUNT OF MONEY OR GET A DEBIT/CASH CARD FOR PURPOSES OF THE DRUG/ALCOHOL TEST. IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT OUR HIRING OFFICE AT ****************************************** BEFORE AGREEING TO PAY FOR A DRUG/ALCOHOL TEST Job Posted by ApplicantPro

Job Description Join Schwing America - Where Precision Meets Performance For over 50 years, Schwing America has been a leader in manufacturing top-quality concrete construction equipment. Based in White Bear Lake, MN, we build the machinery that shapes the infrastructure of tomorrow. If you're a skilled welder who takes pride in craftsmanship and quality, we want you on our team. Position Summary: As a Welder, you will operate welding equipment and perform position welding with a high degree of proficiency to meet production requirements. This role demands strict adherence to quality standards and safety procedures. You will work closely with production leads to meet daily welding schedules and maintain our reputation for excellence. Key Responsibilities: Review daily welding production schedules with Production Lead to understand output goals Read and interpret blueprints to identify weld locations, components, and layouts Weld component parts according to prints and product specifications Perform grinding, deburring, and polishing to produce finished, high-quality welds Inspect welds regularly to ensure consistency with company quality standards Repair welds to meet German DIN and AWS D.1.1 standards, including field welding Report any safety, equipment, tooling, or quality issues immediately to supervision Operate barcode scanner and computer systems for tracking labor and work instructions Perform other duties as assigned Qualifications: Technical degree in Welding required Must pass Schwing America welding tests and maintain certification through periodic Quality Control testing AWS D.1.1 certification required Excellent problem-solving and troubleshooting skills Ability to read and interpret blueprints Comfortable using computers to access work instructions and track labor Must pass annual Jager Eye examination Physical Requirements: Work performed 100% inside the plant facility Ability to lift up to 50 lbs. as needed Why Work at Schwing America? Work with state-of-the-art welding equipment in a clean, modern facility Join a company committed to quality, safety, and employee development Competitive wages and comprehensive benefits package Opportunities for career advancement and skills growth Apply today to join Schwing America and weld your future with a trusted industry leader.

Welder - 2nd Shift Department: Production Location: Minneapolis, MN START YOUR APPLICATION Electric Machinery Company, a division of WEG Electric Corp. Minneapolis, MN Welder - 2nd shift Team: Fabrication Team A Welder is responsible for setting up, fabricating and welding complex parts using various welding processes. A Welder works with a high degree of detail adhering to safety and quality standards. Major Areas of Accountability: * Set up and fabricate a wide variety of components using various welding processes, primarily FCAW and GMAW. * Use oxygen-acetylene, oxygen-natural gas, plasma arc and carbon-arc equipment to heat, straighten, trim and bevel ferrous and non-ferrous material. * Read drawings and routings to determine method, sequence of operation, position, tolerances and welding specifications, to include proper filler materials, fluxes and weld machine settings. * Make all necessary layouts and setups using proper tools and fabricating equipment. * Uses portable electric or air driven grinding or chipping equipment. * Perform self-inspection and documentation of welded components. * Provide feedback on rejected welded components, and may determine disposition of rework for rejection report. * Works in other areas of the Fabrication Team skills matrix, may work in other areas fabricating parts and brazing. * Lift and move materials using forklift, pallet jack, overhead crane or jib crane. * Demonstrates a commitment to Continuous Improvement by identifying opportunities in day to day work. * Performs to ISO 9001 Quality Standards and abides to OSHA and EPA regulations. Knowledge/Skills/Abilities: * 1-2 year welding degree or High School degree with a minimum of 3 years relevant welding experience. * Must pass a FCAW 3G and GMAW-SC 2G weld test. * Knowledge of layouts, ability to read blueprints, perform basic math and calculate conversions. * Ability to be certified in overhead and Jib crane operation and forklift operation. Salary Based on experience and qualifications Pay Types Voluntary weekend overtime. Saturday is paid at time and a half, Sundays are paid at double time! Job Type Monday Friday, 2nd shift 3:30 p.m. - 12:00 a.m. Full-time (Union) Benefits * Medical, Dental & Vision Insurance eligible your 1st day on the job * 401K with Match 1st of the month following hire * Quarterly Bonus Program payout potential * Company paid Holidays (13) * Paid Time Off (PTO) accrued * Company paid Short & Long Term Disability * Company paid Life Insurance * Paid Birthday (use anytime throughout the year) * $6,000 annual Tuition Reimbursement program * Company provided tools * Uniforms (laundered), Safety Shoes & Glasses * Secure, onsite free parking Physical Requirements: * Routinely lifts and moves objects up to 50lbs. * Occasionally ascends/descends ladders and stairs. * Occasionally works at heights or on platforms. * Routinely positions self in various works spaces, including low, tight or confined spaces. * Routinely remains in a stationary position, often standing or sitting for prolonged periods of time. * Routinely uses repetitive motions including the wrists, hands or fingers to operator machinery or tools. * Occasionally moves from one work station to another to accomplish tasks. START YOUR APPLICATION

We are currently looking for a Plastic Welder to join our team at Apollo (an Apex Water and Process Inc. company) at our Chanhassen, MN, location! This is a full-time, hourly, non-exempt position offering a complete benefits package, including competitive PTO, 401K with a company match, health, dental, vision, disability and life insurance. New, full-time employees start accruing PTO right away and are eligible for benefits within 31 days or less. We also offer a clean, bright and safe work environment! Apply today and take the first step in working for a company where your contributions and career development truly matter! ABOUT APEX WATER AND PROCESS INC. Apex Water and Process Inc. (***************** is a comprehensive provider of fabrication, as well as water and process solutions, for industrial and agricultural markets with enterprise-level partnership and customer service. As a vertically-integrated parent company to six outstanding regional brands, Apex is uniquely positioned to meet all our clients' fabrication, chemical, equipment, engineering and service needs efficiently and effectively. We are a fast-growing, dynamic company with a strong, supportive culture that offers many opportunities for career development and advancement, and we are always looking for passionate, dedicated individuals to join our team to help us continue to strive for excellence as we provide valuable, innovative solutions for our customers! Job Description JOB SUMMARY: The primary objective of the Plastic Welder position is to fabricate plastic assemblies according to print specifications in a timely manner to meet customer requirements and the production schedule. This includes fabricating standard parts, as well as custom parts, building complete products, and inspecting the work performed to meet internal and external requirements. JOB DUTIES: Fabricate plastic piece parts, turntables, cabinets, and fusion assemblies, and perform solvent welding and other tasks as assigned Read and interpret technical drawings and schematics to determine fabrication requirements Select and prepare plastic materials for welding, ensuring they are clean and free from defects Operate hand and power tools, such as grinders and cutters, to shape and trim plastic components as required Inspect components to ensure they meet quality standards and make any necessary adjustments Perform secondary machining operations as required Help to ensure the products we manufacture meet or exceed customer quality expectations Ensure adherence to production schedules to ensure on-time deliveries, working closely with production scheduler Take the initiative to identify and implement improvements to our processes along with the products we deliver Follow all safety procedures, along with 5S standards Participate as an active team member and be willing to cross-train as required (i.e. machining and assembly areas) Train and assist others as required Adhere to and follow all Company policies Other duties as assigned Qualifications QUALIFICATIONS: High school diploma or equivalent Certificate or diploma in welding or related field or equivalent work experience in welding/fabrication Ability to work independently with minimal instruction and supervision and effectively plan, organize, and execute own activities Ability to communicate clearly and professionally with customers, vendors and colleagues Ability to read and interpret technical prints and drawings without assistance Ability to read and understand Safety Data Sheets Ability to wear personal protective equipment necessary for duties performed Ability to use hand and power tools Ability to weld in all positions and work with all types of plastic materials Ability to lift 50 pounds unassisted and over 50 pounds with assistance Ability to work well with others and take direction and feedback Strong attention to detail and ability to problem-solve Willingness to work overtime when required Additional Information An offer of employment at Apollo is subject to a pre-employment drug screen, physical and background check. Apollo is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state, or local protected class.