Field engineer jobs in Beeville, TX

Our client is a trusted IT infrastructure and managed services provider serving enterprise customers worldwide. Based out of Dallas, they are looking to hire an IT Project Coordinator/Customer Engineer on a Contract basis. Contract Duration: 6 Month Contract (Potential for extension or conversion) 70-80% travel (both in state and out of state) is required for on-site installations at client locations. There will be mileage reimbursement for the travel. Required Skills & Experience Coordinator for IT Projects at assigned location(s) Single Point of Contact (SPOC) in all matters of Technology at assigned location(s) Collaborate and Coordinate with Clients, Vendors, and Project Management Teams as needed. Ensure that all Site standards are met via Standard Operating Procedures (SOP) and methodology Perform quality work on all deliverables including deployment and network activities Ensure customer satisfaction Ability to install and deploy all field technologies. (POS, Desktop, Label Printers, Office Printers, Kiosks, Tablets, Cabling, and smart hands for Network Equipment). IMAC Services. Perform installation, move, add, and Change for all Supported Equipment at assigned location(s) Performs general preventative maintenance tasks on computers, laptops and any other authorized peripheral equipment Daily Responsibilities Face-to-face customer service experience Proven IT Support and Field Service experience (7+ YoE) Project Management knowledge, Experience in : Incident Management, Problem Management, Change Management, Knowledge Management Proficient in network topology, familiar with rack and stack (Datacenter, IDF / MDF closets), minor config with assistance (assign IPs and verify network connectivity) Proficient with workplace deployment activities; desktop, monitor, docking station, PC/ Laptop / Thin client and peripherals, VoIP Ability to work efficiently as an individual and lead small or large team as required You will receive the following benefits: Medical Insurance - Four medical plans to choose from for you and your family Dental & Orthodontia Benefits Vision Benefits Health Savings Account (HSA) Health and Dependent Care Flexible Spending Accounts Voluntary Life Insurance, Long-Term & Short-Term Disability Insurance Hospital Indemnity Insurance 401(k) including match with pre and post-tax options Paid Sick Time Leave Legal and Identity Protection Plans Pre-tax Commuter Benefit 529 College Saver Plan Motion Recruitment Partners (MRP) is an Equal Opportunity Employer. All applicants must be currently authorized to work on a full-time basis in the country for which they are applying, and no sponsorship is currently available. Employment is subject to the successful completion of a pre-employment screening. Accommodation will be provided in all parts of the hiring process as required under MRP's Employment Accommodation policy. Applicants need to make their needs known in advance.

Company Flotek creates unique solutions to reduce the environmental impact of energy on air, water, land and people. A technology-driven, specialty green chemistry and data technology company, Flotek helps customers across industrial and commercial markets improve their environmental performance. The Company serves specialty chemistry needs for both domestic and international energy markets. Flotek has an intellectual property portfolio of over 170 patents and a global presence in more than 15 countries, including North America, Latin America, the Middle East and North Africa. Flotek is based in Houston, Texas and its common shares are traded on the New York Stock Exchange under the ticker symbol “FTK.” For additional information on Flotek, please visit ****************** Overview In this role, the Field Operations Technician will be responsible for commissioning, service, maintenance, and testing of the Verax analytical equipment in downstream, midstream, and upstream field locations. In this role, the Field Operations Technician will be expected to apply knowledge of electronic, mechanical, and fluid transport principles to support sales, operations, and engineering in every aspect of the company. Travel to the field where our equipment is installed will be required regularly. The candidate should be comfortable working independently and communicating across multiple platforms with customers and remote team members. Key Responsibilities Reporting to the Field Operations Foreman, the Field Operations Technician will have direct responsibility for the following: Safely commission analyzers and ancillary components in the field Capture liquid and gas hydrocarbon samples in the field to improve Verax analyzer accuracy Perform pre-installation site surveys to determine where to locate analyzer and measurement points Maintain and service systems in field installations to ensure accurate data is generated Work closely with customer service managers to ensure all necessary electrical and controls equipment systems are in place and functioning properly Maintain, modify, and troubleshoot embedded PCs, software, and communication devices Ensure site connectivity to remote and cloud data centers via telecommunication networks Provide training and technical support for customers and partners at their sites Adopt a safety-first attitude and adhere strictly to both customer and Flotek safety regulations Candidate Requirements Minimum 5 years of experience with electrical/mechanical systems Valid driver's license (with no restrictions) Availability to be in the field on a daily basis Willingness to travel outside your region for installations in other areas of the country Commitment to teamwork Ability to communicate professionally and effectively with customers Detail-oriented professional with excellent analytical, planning, evaluation, and implementation skills Self-directed and independent individual, working with little direct supervision Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, employees may be required to engage in various tasks involving handling and manipulation, reaching, and communication. Employees may also need to sit, stand, and move around. Occasionally, they may need to lift or move objects weighing up to ten pounds. The role may involve visual tasks that require the ability to see at varying distances and adjust focus. Other Duties This job description is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of the employee for this job. Duties and responsibilities may change at any time. EEO Statement Flotek Industries is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender (including gender identity and/or expression), pregnancy, national or ethnic origin, age, disability, veteran status, or any other characteristics protected by applicable local, state or federal laws.

🚧 Construction Field Engineer - Job Opportunity We're looking for a highly motivated Construction Field Engineer to join our team and support field operations on key infrastructure and building projects. If you're passionate about solving problems on-site, coordinating with multidisciplinary teams, and ensuring top-quality project execution, we'd love to hear from you! 🔧 Key Responsibilities Assist in day-to-day field operations, ensuring work is performed according to plans, specifications, and safety standards. Conduct site inspections, track progress, and prepare field reports. Interpret technical drawings and provide guidance to site crews and subcontractors. Coordinate materials, equipment, and work schedules to maintain efficient construction workflows. Support quality control and verification of completed work. Identify and troubleshoot on-site issues, proposing cost-effective solutions. Maintain accurate documentation, including RFI logs, as-built records, and field changes. Collaborate with project managers, site supervisors, and engineers to ensure timely project delivery. 🎓 Qualifications Bachelor's degree in Civil Engineering, Construction Management, or related field (or equivalent experience). 1-3 years of construction or field engineering experience preferred. Strong understanding of construction methods, materials, and safety practices. Proficiency with project management and design software (AutoCAD, Bluebeam, MS Project, etc.). Excellent communication, problem-solving, and organizational skills. 💼 What We Offer Opportunity to work on impactful projects with an experienced team. Competitive salary and benefits package. Career growth pathways and ongoing professional development.

Join the country's leading Cardiac PET provider! Cardiac Imaging Inc. (CII) is looking for talented and ambitious professionals to join our dynamic team and improve patient outcomes across the nation. Despite heart disease being the leading cause of death in the US, most physicians and patients do not have access to the leading technology in Cardiology. At CII, our mission is to create a more accessible healthcare system by enabling all physicians to treat their patients with the most advanced technology - all from the comfort of their own practice. Our innovative team drives this mission forward each and every day with our Mobile and Fixed Cardiac PET Solutions. As we continue to grow, we currently have a tremendous opportunity for a Senior Field Service Engineer who is up for the challenge. Summary: Responsible for providing installation, technical repair and service work in the field or at the hub for equipment and systems, including ensuring equipment in trailers does not interfere with the safety of operation of the trucks and trailers on roadways. Lead or assist with the installation and servicing of medical imaging equipment and provide assistance to Service Engineers, Technicians as well as Apprentices. Repair, replace or install parts and devices with expertise as required. Essential Functions: The following list of essential functions is not intended to be restrictive or all inclusive. The fact that certain duties may not be listed does not limit the assignment of additional and/or other duties. Independently complete full mobile unit load inspection to ensure secure road safety, including PET-CT and Uninterrupted Power Supply (UPS) secured to specifications, in addition to checking electrical system for fire hazards and safe operation, quarterly or at least bi-annually, or sooner if problems arise. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make. Complete safety checklist of mobile unit inspection to identify any abnormalities, weekly for local units, or at least 5-6 times per year for remote units. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make. Perform trouble shooting and field repairs. Provide phone support for customers and CII clinical staff regarding technical issues in a professional and friendly manner. Prepare/perform equipment Preventive Maintenance according to specification and documentation. Submit and fill out all required paperwork and service reports in a timely manner, no later than 48 hours. Preparing equipment for customer installation, including staging system and testing for functionality including Packing, for PET/CT system, PET system, CT system, elution system, computer, laptop, dose calibrator, blood pressure monitor, ECG system, and systems for image data transfer. Parts testing at hub locations. Leading installation and deinstalls as required. Support team members especially service technicians and service apprentices in their trouble shooting, training and guidance for field repairs or preventive maintenance. Find spare parts if needed or support Inventory specialist in parts acquisition. Conduct training classes for existing or new equipment service. Inspect and report irregularities, cleanliness, defects of CII assets, including mobile and fixed sites. Maintain tools and calibration requirements. Always adhere to safety procedures. Travel up to 80% of the time. Other related duties as assigned. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Physical activity - talking, hearing, balancing, stooping, kneeling, crouching, reaching, standing, pushing, pulling, lifting, grasping, and fingering. Medium work - exerting up to 50 pounds of force occasionally and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Visual Acuity - The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. The worker is required to have visual acuity to perform an activity such as: operates machines where the seeing job is at or within arm's reach; performs mechanical or skills trades tasks of a non-repetitive nature. The work is required to have the visual acuity to operate motor vehicles and/or heavy equipment. Travel: Extensive nationwide travel is required for this position, on a moment's notice if needed, including overnight stays. Qualifications and Requirements: An Associate's degree in electronics or equivalent work experience Five (5) or more years of Siemens Biograph system staging, installation and troubleshooting Two (2) or more years of experience as a Service Engineer with an established service organization or OEM in the Nuclear Medicine field or completed CII training. Basic computer skills, MS Suite Valid Driver's license and clean driving record Reliable Transportation Ability to travel US wide Ability to read operating manuals and instructions Ability to communicate fluently both verbally and in writing Problem-solving skills and ability to exercise independent judgment and discretion Knowledge of electronic safety and procedures, low to high voltage Electronics/Mechanical background Advanced Knowledge of PET/CT and or PET Self-driven, motivation to succeed Ability to learn company policies and adhere to them in the performance of all assigned duties and communicate any compliance deviations to management in a timely manner

Job Title: Custom Apps MMSC Integration Engineer On-Site Presence in: Plano TX Job Description & Skill Requirement: Excellent written and verbal English communications skills, with experience reporting project status to an internal and customer audience Understanding of Messaging Call Flows. Specifically: 1. Core Application Products MMSC and SMSC 2. 4G MMSC call flow in GSM 3. Writing Ansible Playbooks High level understanding and experience in below Protocols: 1. Diameter (message flow mostly) 2. SGd 3. SCTP connectivity 4. http2 protocol (TCPIP transport understanding is a must) Basic understanding of Docker, Kubernetes, Helm charts, Openstack Familiar with basic flow of LCM operations Familiar with Nokia infra, LCM managers & Orchestration: NCS & NCM, MS Azure, NCOM/CBND Well versed in Cloud technologies: 1. CBIS/CBAM 2. NCS (Containers) 3. Docker 4. Kubernetes Well versed in following technologies: 1. BM (Baremetal) 2. VNF (Virtual) 3. CNF (Container) Good understanding of: 1. Troubleshooting deployment issues and resolving 2. Scripting and automation 3. Call flows 4. Artifact generation

Why Renovo? Renovo Solutions is a nationwide healthcare technology management company. We offer a range of opportunities for technicians to grow within the company. With a presence in 40+ states, we provide comprehensive solutions for managing & maintaining healthcare technologies. We prioritize investing in our employees' development, offering various phases and advancement paths. Through ongoing training, mentorship programs, and a supportive work environment, we foster professional growth and promote from within. Join our team to make a difference in healthcare while advancing your career with Renovo. Summary This is a dynamic position that is highly visible to Renovo HTM colleagues and customer stakeholders. As a subject matter expert in imaging equipment, this role will perform repairs, maintain, and document the work in RenovoLive (CMMS). This is a dedicated role to one hospital facility that will be full-time onsite. What you will do: This role will be responsible for general troubleshooting and electrical/mechanical repairs Leverage all standard test equipment for installations, calibrations, and planned maintenance: Multimeter Invasive and non-invasive X ray meter Oscilloscope Service software and keys Dosimeter Hand and power tools AC line analyzer Phantoms Read, analyze, interpret and follow signal flow on blueprints, schematics and wiring diagrams Maintain OEM equipment (for example: Siemens, Philips, GE, Canon, etc.) and record all work performed in Renovo's CMMS. Responsible for preventative maintenance and repairs to any of the following: CT, MRI, X-Ray, C-arms, Fluoroscopy, etc. Perform other duties as assigned under the leadership of a Renovo manager or supervisor Qualifications: 5+ years of experience Imaging repairs and using with test equipment Proficient with Microsoft and Google software applications (Word, Excel, Gmail, etc.) Leverage electrical and mechanical skills to complete daily tasks Interpret and utilize service manuals, schematics, and other applicable service information Perform/document planned maintenance and repair of the diagnostic imaging equipment and systems Demonstrate good organizational and communication skills Interact effectively with company personnel and clinical staff in accordance with Renovo's operational and personnel policies/procedures Exercise problem-solving and troubleshooting skills with all equipment and technology Understand all aspects of clinical applications and image quality requirements related to imaging equipment Education/Special Training: H.S. Diploma or equivalent required. College Degree or Technical Certification CBET, CRES, or OEM training preferred Required Competencies: Accountability - takes ownership of assigned work and responsibilities, follows through, and closes the loop Communication - clearly expresses thoughts and ideas both in written and verbal communications, provides timely information Financial Acumen - Considers financial impact of all decisions Integrity - Can admit mistakes, is direct and truthful Customer Service - demonstrates a “customer-first” mentality, focused on meeting the needs of customers and captures feedback to make improvements Priority Setting - Prioritizes assigned schedules and workload Sense of urgency - Possesses and displays a sense of urgency to internal and external customers Team Building - Mentors newer technicians, facilitates clear communication amongst the team, demonstrates care and respect for co-workers and colleagues Regulatory - knows the various accrediting agencies (TJC, DNV, CAP, DOH) and how the Medical Equipment Management Plan complies Giving Feedback - Provides constructive feedback towards department goals and activities, helps to foster growth within the team Safety Requirements: Abide and follow our Injury & Illness Prevention Program On-time completion of safety trainings assignments Physical Requirements: Must have near vision, far vision, depth perception, and be able to distinguish colors Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds Must be able to push or pull over 100 pounds frequently (20% of the time) Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties Working Hours: Full-time schedule Mon-Fri. 40 hours per week. Overtime may be required or permitted with prior approval Will need to be available for after-hours service, emergency calls on weekends, part of the on-call schedule Classification: FLSA: Non-Exempt Note: This position description does not list every activity, duty, and responsibility of the position and may be altered by RENOVO at any time. EEO Statement RENOVO Solutions provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, RENOVO Solutions complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Employee signature below constitutes employee's understanding of the requirements, essential functions and duties of the position. Also, signature acknowledges that a change in duties with or without notice can occur at any time. Employee is an “at-will” employee, and this does not act as a contract of employment.

Project Engineer / Solutions Delivery (MSP ) Houston, TX Hybrid - Local Candidates Only Career Track: Senior Project Engineer → Solutions Architect → vCIO We recently scaled past the typical MSP ceiling and are now entering a strategic expansion phase backed by experienced leadership from national-level managed service providers. Our focus is tight and intentional: secure hybrid infrastructure for SMB clients in architecture, engineering, and construction (typically 50-110 users). This role was created because we are no longer operating like a reactive ticket MSP. The demand for planned, scoped, and fully executed modernization projects has grown faster than our internal delivery capacity and we want someone who thrives in the build, improve, standardize lane. You'll sit in the middle of our technical operation: converting needs uncovered by vCIOs and account strategy into clear-defined scopes, technical plans, deployment steps, and clean handoffs. You are the one who sees the entire project lifecycle and ensures it lands clean. What You'll Actually Do Lead technical scoping calls with SMB client stakeholders (not enterprise boards) Evaluate existing environments and identify modernization paths Draft SOWs, deployment plans, timelines, and resource requirements Execute infrastructure upgrades: virtualization, hardware refresh, routing/switching, backup Own hybrid environments with M365 + on-prem + light cloud extensions Build out VPN, network segmentation, remote access best practice models Partner closely with vCIO for strategy and TAM for operational follow-through Ensure documentation, closeout procedures, and handoff to operations are polished Ideal Experience Profile 3-6 years in an MSP environment required Hands-on with M365 identity, tenant cleanup, conditional access Comfortable with SMB virtualization (Hyper-V, VMware) and server refresh cycles Solid networking fundamentals (switching, VLANs, VPN tunnels) Can communicate clearly with non-technical end users and mid-market leadership Enjoy modernization: structured rollouts, refresh plans, standardization This is project ownership, technical planning, and predictable delivery. Why We are Different We've crossed the phase where MSPs typically stall, we're scaling upward, not sideways Senior leadership investment is long-term (security maturity, automation, compliance) We scope before we assign and you won't wake up to mystery Friday cutovers Security-first approach vs. “keep the lights on” MSP model Compensation & Benefits $115K - $130K 401(k) with match Medical, dental, vision HSA options Life insurance Paid time off Professional development + certification investment

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

The OSM Project Engineer supports the planning, coordination, and execution of offsite manufacturing (OSM) scopes, working directly with the OSM Project Leads. This position is highly involved in the daily details of the job, balancing desk-based coordination and technical tasks with frequent field walks. The OSM Project Engineer works closely with subcontractors, vendors, clients, and design teams to facilitate workflow, maintain documentation, and ensure that technical and schedule requirements are met. Essential Responsibilities: Support daily coordination between subcontractors, vendors, and the OSM field team to maintain schedule compliance. Monitor subcontractor progress in the field, escalating issues to the OSM CM or Superintendent as needed. Review and process RFIs, submittals, and change documents; track and distribute to appropriate parties. Interpret 3D and 2D design documents, specifications, and technical manuals for accurate field install and implementation. Track and update project documentation to reflect current conditions, scope changes, and approvals. Assist with QA/QC efforts by coordinating inspections and ensuring work meets project standards. Support procurement efforts, including OSM vendor coordination and delivery tracking. Prepare meeting agendas, take detailed minutes, and maintain action item logs. Maintain clear and timely communication between field and office teams. Perform other duties as assigned to support the OSM CM and Superintendent. Position Summary: Professional Experience and Education Minimum 3 years of construction experience, with at least 1 year in OSM, modular construction, or related prefabrication environments preferred. Industrial or high-tech project experience preferred. OSHA 30 certification required (may be obtained after hire). High school diploma or GED required, bachelor's degree in engineering, construction management, or related field preferred. Position Related Skills Proficiency in Microsoft Office 365 (Excel, Word, Outlook, PowerPoint, Teams) and familiarity with network-based systems. Experience with project management tools (Prolog, Procore, E-Builder, Bluebeam, Microsoft Project, Primavera P6). Familiarity with design software such as AutoCAD (optional), Revit (optional), and Navisworks (preferred). Ability to read and interpret 3D and 2D construction documents and specifications. Understanding of CSI specification system for construction. Strong organizational skills with attention to detail. Ability to work effectively with a variety of trades and personalities in both office and field environments. Strong time management skills with the ability to prioritize in a fast-paced setting. Excellent written and verbal communication skills. Self-starter with the ability to work independently and as part of a team. Flexible schedule to support extended hours or off-shift work as project needs require. Physical and Mental Requirements: Combination of desk work and field activity throughout the day. Ability to climb ladders, scaffolds, and stairs; work in confined spaces. Frequent use of hands, arms, and legs for computer work and field tasks. Vision requirements include close vision, depth perception, and the ability to adjust focus; must be able to operate a vehicle with a valid driver's license. Tolerance for high-noise environments (hearing protection provided). Ability to lift or carry up to 50 lbs to a height of 3 feet and transport it 50-100 feet. Frequent bending, twisting, kneeling, crouching, or crawling to inspect work. Must exercise independent judgment and problem-solving skills to determine the most effective course of action.

Our client are seeking an Electrical Engineer with strong hands-on troubleshooting skills and experience supporting day-to-day operations in a chemical manufacturing environment. The ideal candidate can quickly diagnose electrical issues in the field, mentor I&E technicians, communicate effectively with Operations and Maintenance, and lead small-to-medium engineering projects from concept through detailed design (via internal work or external engineering firms). This position provides a growth path within a fast-growing company backed by a multi-billion-dollar investment firm. About the Role Main Responsibilities: Operations & Maintenance Support Provide daily field support for troubleshooting electrical equipment, including motors, MCCs, VFDs, lighting systems, breaker coordination, transformers, protection relays, switches, UPS/backup systems, and low/medium-voltage distribution. Serve as technical authority for electricians and I&E technicians; provide coaching, training, and guidance on best practices and troubleshooting methods. Lead or participate in root cause investigations for electrical equipment failures and operational upsets. Support turnarounds, outages, and equipment commissioning activities. Stakeholder Engagement & Communication Communicate clearly with Operations, Maintenance, EHS, Reliability, Supply Chain, and leadership regarding equipment conditions, risks, and recommended actions. Prepare concise technical summaries and recommendations for both technical and non-technical audiences. Coordinate with OEMs, vendors, and third-party specialists during troubleshooting, repairs, and inspections. Engineering & Project Support Develop scopes of work, engineering specifications, one-line diagrams, load studies, panel schedules, and cable/conduit sizing for small capital projects and reliability improvements. Oversee and manage external engineering firms (EPC/E&I) during detailed engineering phases review drawings, calculations, studies, and ensure compliance with company standards and industry codes. Review and approve vendor electrical packages and ensure compatibility with existing plant systems. Support construction and installation activities; verify quality of work and perform field inspections. Electrical Reliability & Compliance Participate actively in PSM processes including MOC, Pre-Startup Safety Reviews (PSSR), Incident Investigations, and Process Hazard Analysis follow-ups. Support the development and implementation of electrical reliability programs (infrared inspections, breaker maintenance, relay testing, motor testing, etc.). Analyze operating data to identify equipment degradation and recommend preventive and predictive actions. Ensure compliance with NFPA 70, NFPA 70E, NEC, IEEE, ISA, API, and applicable OSHA regulations. Maintain and update electrical system documentation (one-lines, schematics, equipment databases). Qualifications 5 - 15 years of experience as an Electrical Engineer Four-year degree in an engineering discipline, Electrical strongly preferred. Industry/Manufacturing experience preferred. Experience with low- and medium-voltage systems required; high-voltage experience preferred. Demonstrated experience supporting PSM-regulated units strongly preferred. Required Skills Strong computer skills and proficient with internet, email, and Microsoft Office programs. Strong field troubleshooting ability in a chemical or heavy industrial environment. Strong understanding of arc flash studies, breaker coordination, and electrical safety programs. Demonstrated ability to work in a fast-moving, team environment. Ability to analyze complex technical issues and develop engineering solutions. Ability to lead, coach, and mentor technicians and junior engineers. Excellent verbal and written communication skills with all levels of the organization. Ability to balance urgent operational needs with longer-term reliability and project work. Experience with SKM, ETAP, AutoCAD, or similar tools preferred. Familiarity with industry codes standards including NEC, IEEE, IEC. Preferred Skills Experience with SKM, ETAP, AutoCAD, or similar tools preferred. Familiarity with industry codes standards including NEC, IEEE, IEC.

Must be willing to relocate to CA, and Relocation Assistance is Available. On-site Work Location: Ontario, CA, Woodland, CA or Sacramento, CA locations Compensation Salary: $85,000-$95,000 At Clark Pacific, exciting building projects are just the beginning! As the West Coast's leading prefabricator of building systems, our talented team of professionals bridge the gap between construction and manufacturing every day, providing solutions and innovations that deliver high-performance structures with enhanced cost, schedule, and safety. It all starts with the Clark Pacific Employee Experience: top talent people working together in an environment that fosters collaboration, growth & development, and compassion. We are great people doing great things, together! We have over 60 years of experience and have successfully contributed to some of the West Coast's most iconic buildings including the Golden 1 Center, the Apple II Campus, the San Francisco 49ers stadium, and the Stanford Escondido Village Graduate Housing to name just a few. When people want to experience, quality, and a partner they can trust, they choose Clark Pacific. Repeat customers, numerous building and environmental stewardship awards, and great employees are some of the things for which we are most proud and grateful. Clark Pacific is seeking a Project Engineer to support our Woodland, CA or Sacramento, CA location. Overview of the position: At Clark Pacific, the Project Engineer is a position that facilitates the successful design, fabrication, and installation of architectural and structural building systems. Working as part of an integrated team within a specific business unit, this role applies engineering, project management, problem solving, and communication skills across all levels and disciplines within the organization, significantly contributing to the project success of some of the West Coast's most iconic and exciting prefabricated buildings. Initial activities pertaining to the Design Phase, including, but not limited to: Submittal drawings (floor plans, elevations, material specifications, connection details, Reinforcing details, General panel details, Design approvals, Reinforcement drawings, and Miscellaneous metal drawings. Manufacturing-related activities pertaining to the Production Phase, including, but not limited to: Providing complete shop drawings (panel elements, structural elements, formwork, form change studies, Birdseye, stripping and yard handling studies to facilitate manufacturing, Ensuring purchasing of all required materials and forms, Design lifting hardware, loops, rigging, brackets, and inserts for stripping and handling forces, Provide and maintain a casting schedule, Perform quality checks, and Engage in start-up meetings with manufacturing, and remain engaged throughout each project's life cycle. Field-related activities pertaining to the Erection Phase, including, but not limited to: Preparing crane studies, rigging diagrams, and the overall project erection plan as well as erection sequence, load lists, and diagrams, Coordinate shipping of miscellaneous metal, Coordinate field manpower requirements with Field & Trucking team to alignment to budget, Ensure fall protection plan is in place, Professionally represent the Company at the field erection site, and Inspect erection quality and performance to plan and budget. General project management including, but not limited to: Project performance to contract specifications, budget, and time commitments, Issue identification, problem-solving, resolution, and escalation (as necessary), Coordinate necessary and requested procedure submittals (such as welding, grouting, post-tensioning, etc., Engage with internal resources throughout the Company to contribute, learn, and develop professionally. Preferred Education and Experience BS in Civil Engineering or Mechanical Engineering, or an Engineering-related degree EIT certification preferred Core Values: Determination: Meet challenges head on! Innovation: Always look for better! Well-Being: Seek the success, health and happiness of all! Benefits: Competitive compensation, being paid on a weekly basis. Health, Dental and Vision Insurance with the options of using Kaiser and VSP for vision! Medical FSA Dependent Care FSA Employer paid life insurance paid by Clark Pacific Voluntary Ancillary Benefits such as Critical Illness, Accident Insurance and Whole life insurance. 401k matching 100% of the first 3%, then 50% of the next 2% *Benefits will be subject to a waiting period* Interested? Want to learn more? If you're a hard-working nice person who is smart and curious, and think that this position is right for you, we want to hear from you. Please apply and let's begin the journey. Welcome to Clark Pacific. Let's do great things together! Clark Pacific is an Equal Opportunity Employer Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities #LI-MV1

Houston, TX Salary Range: $75,000 - $95,000 DOE (up to $100K for 6-8 years' experience) Employment Type: Full-Time | Onsite NO SPONSORSHIP We are seeking a Civil Project Engineer to support the design and development of commercial civil site projects, including grading, utility layouts, stormwater management, and erosion control. This role works closely with senior engineers and project managers to deliver high-quality, compliant, and cost-effective site development solutions. Ideal candidates will have experience with larger-scale commercial projects-such as warehouses, shopping centers, or multi-acre developments-and be proficient in Civil 3D design software. Responsibilities Perform detailed civil engineering design and calculations for commercial site development projects. Develop and review technical drawings, models, and specifications to ensure design accuracy and compliance. Utilize Civil 3D to prepare grading, drainage, and utility plans. Coordinate with architects, contractors, and other engineering disciplines for seamless project execution. Mentor junior engineers and review their work for accuracy and quality. Conduct quality control reviews to maintain compliance with internal and external standards. Participate in client meetings to present design concepts and provide project updates. Provide technical support during construction and assist in resolving design-related issues. Occasional travel to project sites or client offices as needed. Required Qualifications Bachelor's degree in Civil Engineering from an ABET-accredited university. 4-5 years of civil engineering design and/or project management experience. Proficiency with AutoCAD Civil 3D. Preferred Qualifications Experience leading large-scale site development projects (e.g., warehouses, retail centers, multi-acre sites). Professional Engineer (P.E.) license or ability to obtain within the near term. Experience mentoring or reviewing work of junior staff. Key Competencies Strong technical understanding of site grading, utilities, stormwater, and erosion control. Excellent communication and client presentation skills. Solid time management and multitasking abilities. Team-oriented with a proactive problem-solving approach.

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $5.8 billion in revenue for 2023, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Our client, a dominant force in commercial construction, is searching for an exceptional and results-driven Project Engineer Key Responsibilities: Manage the entire submittal and Request for Information (RFI) process. Track, log, distribute, and follow up on all submittals to ensure timely review and approval by the design team, architects, and engineers. Prepare, log, and route RFIs from the field to the design team, tracking responses and disseminating information back to the field and project team promptly. Maintain and update all project logs using the company's project management software. Ensure the field crew and subcontractors have the latest and correct set of construction documents Assist the Project Manager in tracking potential scope changes and cost impacts. Key Experience: 1-3 years of experience in the construction industry, either through internships or previous entry-level roles. Bachelor's degree in Construction Management, Civil Engineering, Architecture, or a related technical field is required. Strong ability to read and interpret construction drawings and specifications. Proficiency with project management software (e.g., Procore, Bluebeam, PlanGrid) and Microsoft Office Suite.

Project Manager - Commercial & Multifamily Construction Company: Hasen About Us At Hasen, we are schedule-driven builders who believe precision and accountability deliver results. We specialize in large-scale commercial and multifamily construction across Texas and beyond. As a trusted partner to our clients, we pride ourselves on collaboration, innovation, and a relentless focus on delivering projects on time, every time-no task left behind. Summary of Position: The Project Engineer will assist the Project Manger to ensure projects stay on schedule and on budget. They will be responsible for project administration and project documentation. The PE will also engage and supervise subcontractors and staff, and guarantee that all components of the project are in compliance. General Duties & Responsibilities: Reports to Project Manager. Assist Project Manager as required. RFI's Create and Track RFI's in Procore Analyze for Cost and Schedule Impacts Steer RFI to acceptable solution with least cost and time impact Notify Consultants of past due responses Review responses with field team Distribute RFI responses to all pertinent subs and vendors Submittals Create, Distribute and Track Submittals in Procore Request Submittal packages from Subcontractors and Track in Procurement Log Review Submittals for compliance with Plans and Specifications. Notify Consultants of past due responses Coordinate & Review Submittals with Field Team Distribute Submittal responses to all pertinent subs and vendors Sub Change Order Management Review Subcontractor Change Order Requests Ensure costs are not inflated. Compare unit / assembly rates with bids or market rates. Estimate quantities using Bluebeam to verify Subcontractor is accurate Process Sub Change Orders Procurement Log Update and Track all required materials on the project Procurement Log Input dates using Project Construction Schedule Meeting Minutes Resposible for taking and distibuting weekly meeting minutes for assigned projects Milestone Schedule Generate and maintain the Project Milestone Schedule Inspections & Reports Review Review inspection matrix from superintendent and ensure all required inspections have been obtained Review all green cards for inspection compliance Notify superinetendent & field team of any irregularities Closeout Manage closeout process. Job Qualifications: • Strong written/verbal skills and ability to communicate effectively with customers. • Ability to work with computers in word processing and property management software, preferably P6 • Strong prioritization and organizational skills • Ability to multi-task • Design-build experience a plus Job Requirements: • BS or BA in one of the following fields: Civil Engineering, Building Construction, Construction Management, Architecture, Architectural Engineering. • Reliable transportation with a valid state-issued driver's license and current liability vehicle insurance • Report to work on time with a neat and professional appearance and be courteous and pleasant to residents and associates at all times. • Ability to clear a background screen, MVR, and drug test Physical Demands: Inspection of Property will include walking and climbing of stairs. The position may require lifting, carrying, and pushing, pulling 25 lbs. Occasionally, frequently up to 15 lbs. or negligible amounts regularly. Phone usage is also required, as is the need to speak professionally and clearly. EEO Statement: Hasen Design Build is committed to providing Equal Opportunity in Employment to all applicants and employees regardless of race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information or any other characteristic protected by law.

Kelly is hiring a Senior Electrical Engineer for one of our construction clients in Austin or Houston, TX Travel Expectations: 25% Can work in Austin or Houston The ideal candidate will possess a comprehensive blend of advanced technical expertise, project leadership, and strong business acumen. At the core, this role requires expert knowledge of electrical engineering concepts, practices, and codes-specifically ANSI and IEEE standards-to lead complex design projects from the initial concept through to completion. This includes the ability to develop innovative, non-standard design solutions and a proven track record of leading teams, mentoring junior engineers, and managing project scope, schedules, and budgets effectively. Furthermore, the Senior Electrical Engineer must have demonstrated experience in business development, including building client relationships, identifying new pursuits, and leading the creation of cost proposals to meet financial performance goals. Strong communication, critical thinking, and problem-solving skills are essential to coordinate with diverse engineering disciplines, resolve design-related issues, and ensure customer satisfaction. Qualifications Expert knowledge of standard engineering techniques and procedures, with strong proficiency in ANSI and IEEE standards for electrical equipment design. Proven experience leading the electrical design for large projects, including electrical substations from 12kV to 500kV. This includes delegating tasks, managing project scope, budget, and schedule, and resolving team issues. Demonstrated ability to build client relationships, participate in sales and marketing, and lead the development of cost proposals and qualification statements. Experience providing leadership, guidance, and instruction to less experienced engineers. Education Masters Degree in electrical engineering is preferred, however Bachelor's degree is required or related degree from an accredited program. 7 years of Electrical Engineering experience required, preferred experience in high voltage substation design. EPC project experience preferred Preferred Certs PE, PMP

Delta Construction Partners is a national executive search firm for the nation's premier electrical and general contractors and industry professionals. Delta has been retained by a confidential client to conduct a search for an Electrical Engineer in Burlington, TX. Electrical Engineer Compensation & Benefits: Competitive base salary Bonus opportunities Medical, dental, vision, life, and disability insurance Paid time off + paid holidays Tuition reimbursement + continuing education support 401K retirement plan with employer match Paid maternity leave Military Reserve pay offset Electrical Engineer Key Responsibilities Maintain technical documentation, maintenance logs, and recurring system reports Support installation, configuration, and testing of integrated network systems in alignment with design packages Assist with staging, commissioning, and troubleshooting during project execution Stay current on advancing technologies and product capabilities through weekly industry research Collaborate with System Engineers to ensure solutions meet operational and performance requirements Partner with the Design team to resolve technical issues and improve design accuracy Recommend workflow enhancements that reduce cost and improve efficiency for future deployments Provide ongoing operational support for high-performance computing environments Monitor system utilization and performance metrics with guidance from senior engineers Develop user-friendly documentation, operating procedures, and interface guidelines for end-users Produce material lists and support procurement for system implementation Electrical Engineer Qualifications Bachelor's Degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, Computer Science, Computer Engineering, Math or Physics preferably from an ABET accredited program 2-7+ years experience supporting technical programs of similar scope and complexity Electrical Engineer Desired Skills & Expertise Strong communication skills across multidisciplinary engineering groups Ability to manage timelines and maintain quality standards under shifting priorities Experience with MS Office Suite (Excel, PowerPoint, Word) Analytical mindset with a proactive and hands-on approach to problem solving Electrical Engineer Work Environment & Physical Expectations Regular computer usage and prolonged seated work Ability to manipulate tools, devices, and keyboards Clear verbal and written communication skills required Ability to analyze technical information and apply engineering principles to solution development Active listening and collaboration across all project levels

The HT Group is currently hiring a Electrical Engineer to support a Healthcare Construction project in Forth Worth, TX. This role is for a mid-to-senior-level electrical engineer supporting complex construction projects, including healthcare facilities. Responsibilities include electrical systems analysis, estimating, quality review, coordination during bidding, field inspections, commissioning, and development of project-specific engineering solutions. The role supports project strategy, quality, and safety standards while contributing to continuous improvement. Location: Fort Worth, TX (DFW area for future assignments) Employment: Full-time salary + benefits Required Skills & Experience: 8+ years of construction and/or engineering experience (preferred) Bachelor's degree in mechanical, electrical, architectural engineering, or related field (required) Commercial HVAC experience on large projects (required) PE license (plus) Healthcare project background (plus) Strong ability to read plans, perform technical analysis, and work collaboratively Proficiency with MS Office and construction-related engineering tools Key Responsibilities: Participate in and support a strong safety and quality culture. Perform mechanical, electrical, and field construction tasks of increasing complexity. Develop budgetary M/E estimates based on schematic and program-level design. Review system options, conduct systems analysis, and provide value-engineering recommendations. Develop scopes of work and support coordination during the bidding process. Assist in bid analysis and subcontractor selection. Define system sequencing requirements and provide schedule-related input. Review design documents to identify quality issues; assist with constructability reviews and quality control programs. Conduct site inspections to verify compliance with specifications and schedules. Support and eventually lead the submittal and shop-drawing review process. Develop commissioning plans, pre-functional checklists, testing procedures, and verify functional testing. Ensure deficiencies are corrected and submit commissioning documentation. Mentor junior team members and contribute to process innovation and engineering tools.

Please note that this role requires candidates to be based in DFW, Texas. At VC3, we don't just solve IT problems - we own them. We serve hundreds of municipalities and organizations across the United States and Canada, bringing IT to the people who need it most. We believe in earning trust, having a growth mindset, and delivering excellence every single time. We're a team of doers, builders, and tech whisperers who live by 4 core values: Go Beyond | Own It | Be Curious| Serve as One We pride ourselves on making IT personal, making IT easy, and getting IT right. And it all starts with our talented team that is committed to raising the bar. The Impact you will have: In this role, you'll provide hands-on support at client sites, resolving technical issues across hardware, software and networks. You will ensure client success through timely resolution and consistent communication. You will understand and follow the VC3 Way, our set of standards and processes to ensure a predictable result for the customer. * Drive to client sites as scheduled while adhering to appointment schedules and promptly communicating any delays to the Service Coordinator * Install and set up new computer hardware, software and peripherals * Troubleshoot and resolve onsite issues related to workstations and printers * Collaborate with VC3 technical staff as onsite support for connectivity issues including ISPs, wireless networks, DHCP, DNS, and remote access technologies including VPN, RDS and Citrix * Educate and guide VC3 clients on technical standards and best practices * Identify recurring issues and initiate problem tickets for them * Make recommendations to the VC3 team for improvements of supported hardware and software * Maintain accurate and real time timesheets, record complete and accurate notes of troubleshooting and communication with clients * Participate in the on-call rotation (1 week every 3-4 months) * Additional duties as assigned * Full-time access to a vehicle, a valid driver's license, and no driving restrictions. Business class insurance for the vehicle if residing in Canada * 2 years of relevant technical experience OR 1 year experience in Service Technician I or II roles at VC3 * 2 years experience managing: Windows Client Operating Sytems (10,11), Microsoft/Office 365, Virus and Security, TCP/IP, DHCP, and DNS * Go Beyond - you take that extra step to create moments that are unexpected but appreciated. * Own It - You have the courage to do what's right, the resolve to take responsibility, and the grit to cross the finish line. * Be Curious - You challenge the status quo and aim for continuous improvement and constant learning. * Serve as One - You believe that together, we are greater than the sum of our individuals, and that teamwork is essential to success.