Field engineer jobs in Monroe, LA

Field Engineering Responsibilities: Closeout Redlines Test Audits Lessons learned Warranties Product Submittals Redline(s): The leads and superintendents will oversee submitting changes to SoW. Redlines shall be completed and submitted to engineering be Field Engineers. Engineering will create internal calendar to keep track of what needs to be done, and when it needs to finalized. Build-out will be the most redlining, given measurements, equipment placements, and grounding/bonding. Field Engineers will check and verify that all infrastructure is installed to design/spec, and if there is any changes, they will finalize redlines for closeout. Fiber: The use of an internal tracker will be the key to most of the redlines for ISP. The design given by IES customers will updated to reflect most of the past changes. Field Engineers will check and verify all of the Fiber scope. Copper: The internal tracker for copper should provide all the information needed for close-out. The Field Engineer may be the POC to ensure everything is installed to print, and if there is any changes, will redline and submit for review. The Field Engineer will check and verify these before close-out. Network: If needed, and confirmed that implementing redlines for Network is needed, the Field Engineer will work with the team to configure the details. If we are to redline these, the Field Engineer will take on most of those responsibilities. RFI referencing/implementation: The Field Engineer will be referencing the RFIs on the redlines as a final task before sending for QA review. Test Audit(s): Everything to do with Audits will be ran and verified by the Field Engineer after the projects are complete. Included in this responsibility is verifying the cable schedule and building the projects in a fashion that is easy for the team, once the audit process begins. 100% verification that the testing projects match the prints. All testing projects should be created and available to the team as soon as the areas are ready. Once the team starts testing, the Field Engineer will start running audits as soon as each post is done. If there are any re-test, he/she will send those out to the team with an expected completion date. Then the Field Engineer will finalize audits once retest are completed. This will all be based upon the schedule in which we will have actualized dates to reference and plan out the project creation phase, and the close-out audit phase. Once each area is completely audited and 100% the Field Engineer will start conforming the testing audit package. Lessons Learned: Between all engineers and QA this document should be actively updated throughout the actual build. At the end of each project the teams will get together and finalize/review the standardized lessons learned template for submitting. The information used for this document will be coming off of the lessons learned tracker. The installation teams should be actively filling those out throughout the build. Warranties: These will be done by the Field Engineer. This happens towards the end of the build, in which the Field Engineer will gather all the information to send for processing/completion. A designated team member will send the required documents to receive the required warranties. Product Submittals: The Field Engineer will complete product submittals. This submittal is the very first one to complete once the RFP is issued. The template is usually copy/paste, with a few additions/subtractions. Verifying the BOM with the POs, as well as obtaining product sheets is required for this submittal. Labels: The Field Engineer will help print off labels for the installation teams. Ideally, having all the labels printed before installation will help in not wasting time throughout the build. We have bins that are organized per area, and a sign out sheet for the leads. We require an email sent to the engineering teams with any reprints needed, and the reason for the reprint. RFI's: A the Field Engineer can, or may, be the main engineer to oversee all RFIs before submission. The Field Engineer will conform and submit, as a collaborative effort for. One important thing to note, when an RFI is issues and there is design related feedback, that will automatically be entered as a lessons learned by the engineering team. Any RFI acceptance/rejections will be formally sent out to the applicable teams, by the Field Engineer. Design (Shop Drawings): The Field Engineer can, or may oversee all work concerning design. This will include verifying and brainstorming areas of interest (where quality has lacked), reviewing and submitting into BIM360, as well as keeping up with revisions, hyperlinks, etc. Areas of focus: Infrastructure (Grounding/Bonding) Copper Fiber Detail sheet(s) Min USD $30. 00/Hr. Max USD $40. 00/Hr. Qualifications Physical and Mental Requirements: Must be self-motivated, positive in approach, professional and lead others to create, develop and implement project process improvement(s). Must promote the Company culture and mission to all employees, vendors, clients and business partners. Must have proven problem solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s). Must be able to diagnose and fix problems with existing equipment and new installs. Must be enthusiastic, passionate, patient and a critical thinker. Must be able to communicate with the customer and have excellent customer service skills. Must have proven high skill level to interpret blueprints and other project documents, including but not limited to, specifications, reporting and quality requirements. Must able to travel within branch territory and/or regional territory as needed. Education, Certification, License, and Skill Requirements: Must have at least a High School diploma or GED equivalency; Bachelor's Degree preferred. Will have at least 3-4 year's commercial low-voltage/structured cabling experience. Must be able to work well with other people Must be proficient with Microsoft Office (Word, Excel and MS Project). Must meet Company minimum driving standards. Must be able to manage multiple tasks/projects simultaneously. Must have demonstrated verifiable ability to define a project, create a project scope of work, develop detailed associated tasks and manage these to final completion and customer turnover. Minimum Years of Experience 0-2 License Required No Minimum Education High School Overview IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets. IES is publicly traded on NASDAQ under the symbol IESC. As of the end of IES's 2024 fiscal year ending September 30, 2024, IES produced over $2. 8+ billion in revenue and employed over 9,485 employees at over 131 domestic locations across the United States. IES is an Equal Employment Opportunity Employer: Minorities, Females, Gender Identity, Sexual Orientation, Individuals with Disabilities, Protected Veterans Encouraged to Apply EEO Statement PLEASE NO AGENCY CALLS. NOTE TO ALL AGENCIES: Any unsolicited agency resumes or agency represented candidates that are presented to any IES employee without first having a signed contract between that agency and the IES Talent Acquisition organization will become the property of IES and no fees will be paid. EEO & Affirmative Action The IES policy on equal employment opportunity prohibits discrimination based on race, color, religion, national origin, sex, age, gender identity, sexual orientation, individuals with disabilities, protected veterans, or any other protected status or characteristic. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment, and also states that retaliation against any employee who files a complaint regarding possible violations of this policy will not be tolerated. IES is also committed to taking affirmative steps to promote the employment of minorities, women, individuals with disabilities, and protected veterans. IES develops affirmative action programs to support its commitment to equal employment opportunity, consistent with company policy and the company's obligations as a contractor to the United States government. View Your Equal Employment Opportunity rights under the law. "EEO is the Law" poster | "EEO is the Law" poster supplement View IES' policy on Pay Transparency Pay Transparency NonDiscrimination Poster Disability Accommodation IES is an Equal Opportunity/Affirmative Action Employer. IES provides reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Title I of the Americans with Disabilities Act of 1990. Applicants who need accommodation in the job application process should contact the IES corporate office at ************** or any IES office to request assistance. IES Participates in E-Verify E-Verify Information English/Spanish Right to Work English Spanish #LI-OnsiteField Engineering Responsibilities: Closeout Redlines Test Audits Lessons learned Warranties Product Submittals Redline(s): The leads and superintendents will oversee submitting changes to SoW. Redlines shall be completed and submitted to engineering be Field Engineers. Engineering will create internal calendar to keep track of what needs to be done, and when it needs to finalized. Build-out will be the most redlining, given measurements, equipment placements, and grounding/bonding. Field Engineers will check and verify that all infrastructure is installed to design/spec, and if there is any changes, they will finalize redlines for closeout. Fiber: The use of an internal tracker will be the key to most of the redlines for ISP. The design given by IES customers will updated to reflect most of the past changes. Field Engineers will check and verify all of the Fiber scope. Copper: The internal tracker for copper should provide all the information needed for close-out. The Field Engineer may be the POC to ensure everything is installed to print, and if there is any changes, will redline and submit for review. The Field Engineer will check and verify these before close-out. Network: If needed, and confirmed that implementing redlines for Network is needed, the Field Engineer will work with the team to configure the details. If we are to redline these, the Field Engineer will take on most of those responsibilities. RFI referencing/implementation: The Field Engineer will be referencing the RFIs on the redlines as a final task before sending for QA review. Test Audit(s): Everything to do with Audits will be ran and verified by the Field Engineer after the projects are complete. Included in this responsibility is verifying the cable schedule and building the projects in a fashion that is easy for the team, once the audit process begins. 100% verification that the testing projects match the prints. All testing projects should be created and available to the team as soon as the areas are ready. Once the team starts testing, the Field Engineer will start running audits as soon as each post is done. If there are any re-test, he/she will send those out to the team with an expected completion date. Then the Field Engineer will finalize audits once retest are completed. This will all be based upon the schedule in which we will have actualized dates to reference and plan out the project creation phase, and the close-out audit phase. Once each area is completely audited and 100% the Field Engineer will start conforming the testing audit package. Lessons Learned: Between all engineers and QA this document should be actively updated throughout the actual build. At the end of each project the teams will get together and finalize/review the standardized lessons learned template for submitting. The information used for this document will be coming off of the lessons learned tracker. The installation teams should be actively filling those out throughout the build. Warranties: These will be done by the Field Engineer. This happens towards the end of the build, in which the Field Engineer will gather all the information to send for processing/completion. A designated team member will send the required documents to receive the required warranties. Product Submittals: The Field Engineer will complete product submittals. This submittal is the very first one to complete once the RFP is issued. The template is usually copy/paste, with a few additions/subtractions. Verifying the BOM with the POs, as well as obtaining product sheets is required for this submittal. Labels: The Field Engineer will help print off labels for the installation teams. Ideally, having all the labels printed before installation will help in not wasting time throughout the build. We have bins that are organized per area, and a sign out sheet for the leads. We require an email sent to the engineering teams with any reprints needed, and the reason for the reprint. RFI's: A the Field Engineer can, or may, be the main engineer to oversee all RFIs before submission. The Field Engineer will conform and submit, as a collaborative effort for. One important thing to note, when an RFI is issues and there is design related feedback, that will automatically be entered as a lessons learned by the engineering team. Any RFI acceptance/rejections will be formally sent out to the applicable teams, by the Field Engineer. Design (Shop Drawings): The Field Engineer can, or may oversee all work concerning design. This will include verifying and brainstorming areas of interest (where quality has lacked), reviewing and submitting into BIM360, as well as keeping up with revisions, hyperlinks, etc. Areas of focus: Infrastructure (Grounding/Bonding) Copper Fiber Detail sheet(s)

The Field Engineer will support construction operations on a hyperscale, mission critical project with emphasis on precision in concrete and foundation scopes. The role ensures accurate layout, documentation, sequencing, and technical compliance during high-volume, fast-track construction involving extensive concrete and heavy civil elements. Requirements · Perform survey layout, elevations, and dimensional checks for formwork, embeds, anchor bolts, and rebar placement. · Review shop drawings, rebar details, and post-tensioning layouts to ensure conformance with design. · Track pour cycles, coordinate logistics for ready-mix deliveries, and verify compliance with mix designs and curing protocols. · Monitor field testing (slump, air, temperature, cylinders) and confirm corrective actions for non-conforming results. · Maintain detailed concrete pour logs including placement sequence, finish type, weather impacts, and testing results. · Draft RFIs and coordinate with design teams to resolve field issues like rebar congestion, embed conflicts, or formwork tolerances. · Assist in planning mass pours, including sequencing of trucks, pump placement, finishing crews, and curing strategies. · Support QA/QC through daily inspections of reinforcement, formwork, and post-tension stressing documentation. · Update as-built drawings to reflect rebar, PT tendon, sleeve, and embed changes. · Collaborate with testing labs, suppliers, and subcontractors to ensure quality and schedule alignment. Qualifications · 3-7 years of field engineering experience with emphasis on concrete, foundations, and structural systems. · Proficiency in survey instruments (total station, GPS, laser levels) for layout and verification. · Strong knowledge of ACI, ASTM, and PCA standards governing structural concrete work. · Experience supporting mass pours, mat foundations, and elevated post-tensioned decks. · Ability to interpret structural drawings, rebar shop drawings, and post-tensioning installation details. · Familiarity with curing methods (water, blankets, compounds, steam), finishing techniques, and tolerance requirements. · Proficient in construction management software (Procore, BIM tools, scheduling systems).

**Job Title:** Project Engineer **Work Place Flexibility:** Onsite **Legal Entity:** Entergy Services, LLC **Please note:** Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position. ****Selected candidate will be placed at title of Engineer Sr Lead or Sr Staff based on education, experience, and demonstrated success at the Engineer level.**** ****This is an onsite role that may be filled at multiple site locations within Entergy's Territory. Those outside these areas will need to relocate. Relocation Assistance is available for this posting.**** **JOB SUMMARY/PURPOSE** As a key member of the Project Management team, the Project Engineer is responsible for the management and coordination of all technical aspects of new power generation capital projects. This role ensures that engineering is aligned with corporate goals and is complete, accurate and constructible for all elements of a project's scope. The Project Engineer oversees contractor's engineering performance and coordinates all contractor and owner's engineering interfaces in addition to ensuring projects are completed according to project construction drawings and in accordance with project specifications, quality, and performance requirements. This position is responsible for coordinating efforts of cross-functional teams and building effective relationships with key internal/external stakeholders, including contractors. The Project Engineer is required to work directly with the Project Manager and Project Controls Specialist to ensure process alignment and compliance. **JOB DUTIES/RESPONSIBILITIES** + Promotes safe behavior, in accordance with Company expectations, and adherence to the safety rules on the project. + Identifies engineered safety controls and hazard removal during engineering design and coach to safe practices in the field. + Supports/Leads cross-functional team consisting of internal Subject Matter Experts, Owners Engineers, EPC Contractors, and Technical Consultants from development of EPC contract through Permitting, Engineering, Construction, Commissioning and Closeout. + Ensures documentation of engineering and construction quality is adequately captured to support audit and prudency review. + Supports/Leads Owner team in writing official Records of Decision to capture prudency of major project decisions. + Acts as Contract Manager for various engineering and construction contracts outside of the EPC, including Owner's Engineer. + Performs/Manages the review of engineering design to assure compliance with the contract, permits, codes, and utility standards while ensuring design supports the strategic, operational and maintenance goals of the project. + Coordinates with the Project Manager in following the Project Delivery System and ensuring requirements are met and producing associated deliverables. + Participates in contractor/vendor selection process with a specific goal of assessing engineering experience,competenciescompetencies,and capability. + Supports/Leads technical open book engineering process with contractors during development of major projects and applies value engineering concepts to ensure projects are competitive. + Assists Contractor and Vendors during design and construction to resolve technical queries, and interfaces. + Assures that all firms solicited to provide engineering services are duly licensed in the state of the project. + Assures Project compliance with NERC and Security Standards. + Ensures all documents generated on the project are stored in designated repository at closeout. + Supports/Leads/Follows change management process for any potential design changes. + Participates in the equipment inspection activities as agreed with the Contractor. + Supports/Leads Owner review and signoff of System Turnover packages from Construction to Start-up and from EPC to Owner. + Supports commissioning and ensures performance, reliability and emissions testing are completed per contract. **MINIMUM REQUIREMENTS** **Minimum education required of the position.** + Bachelor of Science degree in Engineering. + Advanced degree preferred. **Minimum experience required of the position.** + **Project Engineer, Sr Lead** : 10+ years of applicable and progressive professional experience, preferably engineering design, construction or operation ofinstrument and controls, distributed control systems, turbine control systems,and electricalsystems. (8 years with a PE/PMP Certification/Masters Degree) + **Project Engineer Sr Staff:** 12+ years of applicable and progressive professional experience, preferably engineering design, construction or operation ofinstrument and controls, distributed control systems, turbine control systems,and electrical systems(10 years with a PE/PMP Certification/Masters Degree) **Minimum knowledge, skills and abilities required of the position.** + Excellent technical writing and verbal communication skills with strong computer skills and proficiency in Microsoft Office 360. + Strong interpersonal skills and leadership behaviors. + Expert knowledge of engineering fundamentals within at least one discipline (civil/mechanical/electrical/controls/chemical/construction) + Advanced knowledge of the practical application of engineering science and technology to power generation. This includes applying principles, techniques, procedures, and equipment to the design of electrical power generating facilities. + Knowledge of materials, methods, and the tools involved in the construction or repair of power generation facilities and associated QA/QC protocol. + Knowledge of permits required for construction and operation of power generation facilities. + Experience with reviewing, executing, and managing large EPC contracts. + Advanced critical thinking skills and capability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. + Adept in complex problem solving; able to identify complex problems and review related information to develop and evaluate options and implement solutions. **Any certificates, licenses, etc. required for the position.** + Desired: Professional Engineer license and PMP certification. \#LI-NC1 **Primary Location:** Louisiana-Delhi Louisiana : Delhi || Louisiana : Monroe || Mississippi : Vicksburg **Job Function** : Professional **FLSA Status** : Professional **Relocation Option:** Level II **Union description/code** : NON BARGAINING UNIT **Number of Openings** : 1 **Req ID:** 121318 **Travel Percentage** :Up to 25% An Equal Opportunity Employer, Minority/Female/Disability/Vets. Please clickhere (**************************************************** to view the EEI page, or see statements below. **EEO Statement:** The Entergy System of Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws. The Entergy System of Companies complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment including, but not limited to, recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The Entergy System of Companies expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of the Entergy System of Company employees to perform their expected job duties is absolutely not tolerated. **Accessibility:** Entergy provides reasonable accommodations for online applicants. Requests for a reasonable accommodation may be made orally or in writing by an applicant, employee, or third party on his or her behalf. If you are an individual with a disability and you are in need of an accommodation for the recruiting process please click **here (humanr@entergy.com?subject=Accessibility)** and provide your name, contact number, the accommodation requested and the requisition number that you are requesting the accommodation for. Employee Services will contact you regarding your request. **Additional Responsibilities:** As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. **Entergy Pay Transparency Policy Statement:** The Entergy System of Companies (the Company) will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Company's legal duty to furnish information. 41 CFR 60-1.35(c). **Equal Opportunity (**************************************************************************************************************************** and **Pay Transparency (************************************************************************************************* . **Pay Transparency Notice:** Pay Transparency Nondiscrimination Provision (dol.gov) (*********************************************************************************************** The non-confidential portions of the affirmative action program for individuals with disabilities and protected veterans shall be available for inspection upon request by any employee or applicant for employment. Please contact ************************ to schedule a time to review the affirmative action plan during regular office hours. **WORKING CONDITIONS:** As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. **Please note:** Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position. **Job Segment:** Project Engineer, Construction, Contract Manager, Compliance, Technical Writer, Engineering, Legal, Technology

If you are a GPI employee, please click the Employee Login before applying. At Graphic Packaging International, we produce the paper cup that held your coffee this morning, the basket that transported those bottles of craft beer you enjoyed last weekend, and the microwave tray that heated your gourmet meal last night. We're one of the largest manufacturers of paperboard and paper-based packaging for some of the world's most recognized brands of food, beverage, foodservice, household, personal care and pet products. Headquartered in Atlanta, Georgia, we are collaborative, diverse, innovative individuals who create inspired packaging while giving back to our communities. With over 25,000 employees working in more than 130 locations worldwide, we strive to be environmentally responsible in our industry and in the communities where we operate. We are committed to workplace diversity and offer compensation and benefits programs that are among the industry's best to reward the talented people who make our company successful. If this sounds like something you would like to be a part of, we'd love to hear from you. A World of Difference. Made Possible. JOB SUMMARY: General Project Engineering focuses on designing, communicating, and implementing an operational plan for completing an engineering-based project including: Preparing designs, project controls and specifications, schedules, cost estimates, production, transportation, installation, testing and/or commissioning of new infrastructure, facilities, equipment, etc. Monitoring progress and performance against the project plan; taking action to resolve operational problems and minimize delays. Identifying, developing, and gathering the resources necessary to complete the project. May include preparing engineering standards, designs and work specifications; developing project schedules, budgets and forecasts; and selecting materials, and equipment. ESSENTIAL DUTIES & RESPONSIBILITIES: * Responsible for the monitoring and achievement of operational and/or financial results for their area of responsibility. * Progression within the levels reflects increase in scope and responsibilities as well as growth in business and industry experience and broad technical expertise. * Manages subordinate management and/or experienced specialist employees who exercise significant latitude and independence. · Often heads one or more departments. * Allocates resources to align with business objectives and annual business plans. * Works on issues where analysis of situations or data requires an in-depth knowledge of organizational objectives. * Requires a comprehensive understanding of concepts and principles in own discipline and knowledge of other disciplines. * Solves complex problems leveraging resources within or outside the organization. * Implements strategic policies when selecting methods, techniques, and evaluation criteria for obtaining results. * Applies knowledge of key business drivers and factors that maximize performance to area of responsibility. * Establishes operating policies and procedures that affect departments and subordinate sections and work units. * Interprets company-wide policies and procedures. * Develops and assures adherence to budgets, schedules, work plans, and performance requirements. * Assignments are objective oriented; work is reviewed in terms of meeting the organization's objectives and timelines. * Decisions have an extended impact on work processes and outcomes. * Errors in judgment or failure to achieve results may cause critical delays and modifications to projects or operations and substantial expenditure of resources. * Interacts frequently with internal and external leadership and senior-level customer representatives concerning projects, operational decisions, scheduling requirements, and/or contractual clarifications. * Leads briefings and technical meetings for internal and external representatives. POSITION REQUIREMENTS: * Bachelor's in Engineering degree or related work experience required in lieu of degree. The candidate must be able to perform the essential functions of the position satisfactorily, with or without a reasonable accommodation. Graphic Packaging retains the right to change or assign other duties to this position. KEY COMPETENCIES * Business acumen * Curiosity * Interpersonal skills * Influence skills * Self-starter * Negotiation skills * Organization skills * Results oriented Graphic Packaging is an Equal Opportunity Employer. All candidates will be evaluated on the basis of their qualifications for the job in question. We do not base our employment decision on an employee's or applicant's race, color, religion, age, gender or sex (including pregnancy), national origin, ancestry, marital status, sexual orientation, gender identity, genetic identity, genetic information, disability, veteran/military status or any other basis prohibited by local, state, or federal law. Click here to view the Poster, EEO is the Law. Nearest Major Market: Monroe

Job DescriptionDescriptionThe SkillBridge Intern will gain foundational experience in construction project support, assisting with various administrative and operational aspects of project execution. They will support document control, communication with subcontractors and vendors, data entry, and basic scheduling tasks. The intern will learn to organize project files, process invoices, track material deliveries, and contribute to efficient project flow. Key Responsibilities Complete onboarding tasks, including administrative setup, introductions, and integration into company systems and tools. Learn and utilize project management software (e.g., Procore, Primavera P6, Microsoft Project). Enroll in and complete the Construction Project Management Certificate program. Gain foundational knowledge in project management, including project lifecycles, scope, cost, time, and quality management. Learn construction contracts, legal aspects, documentation, and blueprint reading. Shadow Project Engineers on active construction sites to observe execution and best practices. Assist with submittals, RFIs, and project documentation processes. Document project progress, identify potential issues, and support risk mitigation. Participate in project coordination meetings to improve communication and problem-solving. Apply cost control and resource allocation techniques to support project efficiency. Develop and update project schedules using Primavera P6 or Microsoft Project. Support implementation of cost control measures and schedule updates. Participate in quality inspections, field verifications, and audits to ensure compliance with standards. Conduct supervised quality checks and prepare detailed quality reports. Prepare and present a comprehensive project closeout report. Communicate project findings and lessons learned to management. Prepare for transition to a full-time Project Engineer role. Skills, Knowledge and ExpertiseIdeal candidate qualifications Has held multiple safety roles as Non-Commissioned Officer in Charge (NCOIC) or Officer in Charge (OIC) Strong ability to work autonomously Self motivated Combat arms or Strong safety background Eager to grow and develop Certifications (Nice to have) Has up-to-date First Aid/ CPR certifications Has OSHA 10 or 30 PMP Certified CMlean CSST Engineering Degree or Construction Degree Match the Military Occupational Codes (MOCs) specifications to the Ideal candidate These SkillBridge/CSP opportunities will be tailored to the military ranks: E-4 - E-7 | O-1 - O-3 The primary MOSs that will support this: Army Infantry (11B) Armor (19K) Field Artillery (13B) Combat Engineer (12B) Explosive Ordnance Disposal (EOD) (89D) Navy (Marines) Aviation Ratings Damage Controlman (DC) Master-at-Arms (MA) Engineering Ratings Construction Ratings Ground Safety Specialist (8012) - (Secondary MOS) Airforce Safety (1S0X1) Bioenvironmental Engineering (4B0X1) Fire Protection (3E7X1) Explosive Ordnance Disposal (EOD) (3E8X1) Security Forces (3P0X1) Why Lemoine?Five and Fly Partners with Lemoine to bring a construction SkillBridge opportunity to help servicemembers find purpose-driven careers in the construction industry. Lemoine is building a strong company of construction professionals and wants to add transitioning servicemembers into the mix. This is an opportunity to take a step into an industry that is fundamental to the growth and maintenance of the infrastructure of the United States. Vets are key players in filling the roles in this industry, from HR to project engineers, estimators, to heavy equipment operators, you name it, this industry has a role for you. Location: Monroe | Baton Rogue | New Orleans | Louisiana SkillBridge Length: 90 - 180 Days What you will do: Learn Construction Fundamentals Learn about all construction roles Gain relevant industry certs as needed to earn a full-time opportunity Real-time on-the-job training, shadowing a Lemoine employee Learn the vast array of Industry opportunities and how to stay competitive. What you will earn: Critical exposure to the Construction Industry gives you a leg up over your peers An offer to come on the Lemoine team full-time. Lemoine Skillbridge Length: Minimum of 90 days Average of 120 days Maximum of 180 days Lemoine can support SkillBridge programs of lengths between the minimum and maximum allotted program time windows. Lemoine will build a training program that can facilitate SMs with various timelines. The expectation will be established and understood that with a shorter SkillBridge time window, the servicemember will be less likely to land a full-time opportunity upon completing a Lemoine SkillBridge.

**About M.C. Dean** M.C. Dean is Building Intelligence. We design, build, operate, and maintain cyber-physical solutions for the nation's most mission-critical facilities, secure environments, complex infrastructure, and global enterprises. With over 7,000 employees, our capabilities span electrical, electronic security, telecommunications, life safety, automation and controls, audiovisual, and IT systems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration. **Why Join Us?** Our people are passionate about engineering innovation that improves lives and drives impactful change. Guided by our core values-agility, expertise, and trust-we foster a collaborative and forward-thinking work environment. At M.C. Dean, we are committed to building the next generation of technical leaders in electrical, engineering, and cybersecurity industries. Provides technical & administrative information to others working on a project to ensure that the work complies with all general engineering standards, codes, specifications, and design instruction; trouble-shoots engineering related installation problems. Develops solutions to a variety of problems of moderate scope and complexity. Responsibilities + Planning and executing project completion and punch list. + Preparing specifications for purchase of materials and equipment. + Preparing invoices. + Submitting O&M manuals. + Assisting in development of full estimate. + Participate in KPR (Key Project Review). + Managing coordination & detailing logs & schedule. + Managing schedule updates. + Managing productivity reports. + Identifying value added solutions & cost savings methods. Qualifications + 2+ years of experience with a Bachelor of Science degree in Engineering (preferably from an ABET accredited program) + 0+ years of experience with a Master of Science degree in Engineering Abilities: + Exposure to computer screens for an extended period of time. + Sitting for extended periods of time. + Reach by extending hands or arms in any direction. + Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard. + Listen to and understand information and ideas presented through spoken words and sentences. + Communicate information and ideas in speaking so others will understand. + Read and understand information and ideas presented in writing. + Apply general rules to specific problems to produce answers that make sense. + Identify and understand the speech of another person.

S&B is currently seeking a Project Engineer to join our team. Normally this position carries the functional title of Project Engineer or Area Project Engineer and has responsibility for the engineering design of multiple areas or process unit(s) on a project. Reports to a Project Engineer III, Project Lead III or Project Manager. Coordinates all design engineering disciplines for a particular work area. May be placed in responsible charge of small projects under 10,000 manhours of engineering. Must be fully competent in the use of the S&B Project Management Manual. ABOUT S&B S&B is an exceptional full-service Engineering, Procurement, and Construction (EPC) company, proudly maintaining private ownership and operation for over five decades. With our extensive experience, we have successfully undertaken diverse projects across various industries, including Oil & Gas, Chemicals, Petrochemicals, Energy Transition, Power, and Pulp & Paper. What sets us apart is our unwavering commitment to safety, timely project completion, and cost-effective solutions. Our proven track record speaks for itself, as we consistently deliver outstanding results while adhering to the highest industry standards. Moreover, our company culture is unparalleled, fostering an environment of collaboration, innovation, and excellence. At S&B, we understand the value of our talented team, and we ensure they are rewarded accordingly. We offer a competitive compensation package, flexible and hybrid work schedules, and a comprehensive benefits program to attract and retain the best professionals in the field. SUPERVISORY RESPONSIBILITIES: The Project Engineer II is responsible for the overall quality and timeliness of the work from all discipline personnel assigned to the area, and the coordination of the discipline leads. Also, may be responsible for the personnel in engineering support groups charged with tracking cost, progress, and schedule. On larger projects, may be responsible for the work of one or more Project Engineer I's or Project Lead I's. EDUCATION: Normally requires a four-year BS degree in engineering. QUALIFICATIONS AND EXPERIENCE: Requires a minimum of six (6) years total experience, four (4) in one or more of the discipline areas or in an engineering support role, and two (2) years as a Project Engineer I or Project Lead I and registration as a licensed professional engineer. Equivalent working knowledge and experience may substitute for work in a discipline or at the project level. Must have sound knowledge of the various software packages and automated engineering and reporting systems used at S&B. TYPICAL DUTIES AND RESPONSIBILITIES: Obtains a well-defined overall project scope of work from the project manager or client. Participates in progress reporting to the client, oral and written. Communicates with the client and other groups and departments working on the project. Approves all P&ID's revised or created for the project. Approves all new or revised drawings, standards, and specifications. Ensures accuracy of discipline audits, and reviews deviations. Approves all inquiries and requisitions for engineered/tagged equipment and instruments. Initiates project change orders any time changes to scope affect the budget or schedule. Promotes good work habits and attitudes within the various disciplines. LANGUAGE SKILLS: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures and standards, and governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of clients, managers, designers, and engineers. MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. PHYSICAL DEMANDS: Occasionally, will conduct or participate in field trips to existing plants. This requires the ability to stand, walk, reach, climb and balance. Lifting of 25 pounds may be required. It also requires clear close and distance vision, depth perception and the ability to focus. WORK ENVIRONMENT: Normal work environment will be a business office with moderate noise. Occasionally, will conduct or participate in field trips to existing plants. This may require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, vibration, fumes, toxic or caustic chemicals and airborne particles. #LI-Hybrid

S&B is currently seeking a Project Engineer to join our team. Normally this position carries the functional title of Project Engineer or Area Project Engineer and has responsibility for the engineering design of multiple areas or process unit(s) on a project. Reports to a Project Engineer III, Project Lead III or Project Manager. Coordinates all design engineering disciplines for a particular work area. May be placed in responsible charge of small projects under 10,000 manhours of engineering. Must be fully competent in the use of the S&B Project Management Manual. ABOUT S&B S&B is an exceptional full-service Engineering, Procurement, and Construction (EPC) company, proudly maintaining private ownership and operation for over five decades. With our extensive experience, we have successfully undertaken diverse projects across various industries, including Oil & Gas, Chemicals, Petrochemicals, Energy Transition, Power, and Pulp & Paper. What sets us apart is our unwavering commitment to safety, timely project completion, and cost-effective solutions. Our proven track record speaks for itself, as we consistently deliver outstanding results while adhering to the highest industry standards. Moreover, our company culture is unparalleled, fostering an environment of collaboration, innovation, and excellence. At S&B, we understand the value of our talented team, and we ensure they are rewarded accordingly. We offer a competitive compensation package, flexible and hybrid work schedules, and a comprehensive benefits program to attract and retain the best professionals in the field. SUPERVISORY RESPONSIBILITIES: The Project Engineer II is responsible for the overall quality and timeliness of the work from all discipline personnel assigned to the area, and the coordination of the discipline leads. Also, may be responsible for the personnel in engineering support groups charged with tracking cost, progress, and schedule. On larger projects, may be responsible for the work of one or more Project Engineer I's or Project Lead I's. EDUCATION: Normally requires a four-year BS degree in engineering. QUALIFICATIONS AND EXPERIENCE: Requires a minimum of six (6) years total experience, four (4) in one or more of the discipline areas or in an engineering support role, and two (2) years as a Project Engineer I or Project Lead I and registration as a licensed professional engineer. Equivalent working knowledge and experience may substitute for work in a discipline or at the project level. Must have sound knowledge of the various software packages and automated engineering and reporting systems used at S&B. TYPICAL DUTIES AND RESPONSIBILITIES: * Obtains a well-defined overall project scope of work from the project manager or client. * Participates in progress reporting to the client, oral and written. * Communicates with the client and other groups and departments working on the project. * Approves all P&ID's revised or created for the project. * Approves all new or revised drawings, standards, and specifications. * Ensures accuracy of discipline audits, and reviews deviations. * Approves all inquiries and requisitions for engineered/tagged equipment and instruments. * Initiates project change orders any time changes to scope affect the budget or schedule. * Promotes good work habits and attitudes within the various disciplines. LANGUAGE SKILLS: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures and standards, and governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of clients, managers, designers, and engineers. MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. PHYSICAL DEMANDS: Occasionally, will conduct or participate in field trips to existing plants. This requires the ability to stand, walk, reach, climb and balance. Lifting of 25 pounds may be required. It also requires clear close and distance vision, depth perception and the ability to focus. WORK ENVIRONMENT: Normal work environment will be a business office with moderate noise. Occasionally, will conduct or participate in field trips to existing plants. This may require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, vibration, fumes, toxic or caustic chemicals and airborne particles. #LI-Hybrid

Project Engineer - Civil, Industrial & Commercial Concrete 🏢 Company: Gregory Construction Gregory Construction, a Christian-principled, award-winning contractor, is seeking a Project Engineer to support civil, industrial, and commercial concrete projects across the Southeast. This role is essential in assisting project leadership to ensure work is executed safely, on time, within budget, and to Gregory's high standards of quality and integrity. Key Responsibilities: Provide engineering support to Superintendents and Project Managers in daily field operations. Review drawings, RFIs, and project documents to support accurate execution. Assist with purchase order requisitions, material tracking, and delivery coordination. Maintain project documentation, including daily reports, records, and files. Attend and contribute to project progress meetings. Monitor project schedules, costs, and resources to ensure deadlines and budgets are met. Support in maintaining safety, quality, and compliance standards on all project sites. Perform additional tasks as assigned to support project success. Qualifications: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Foundational knowledge of construction specifications, methods, and procedures. Ability to apply engineering principles to solve construction challenges. Strong organizational and communication skills. Previous construction internship, co-op, or field experience is a plus. Willingness to travel as needed for project assignments. Why Gregory Construction: Competitive pay, PTO, and company-paid health/dental/vision/life insurance. 401(k) with company match. Opportunities for mentorship, training, and career growth. Supportive, faith-based culture built on Safety, Integrity, Excellence, Communication, and Determination. Apply today to join Gregory Construction as a Project Engineer and grow your career with a respected leader in civil, industrial, and commercial construction.

Mortenson is currently seeking a Project Engineer that will provide analysis, management, and resolution of field coordination issues with project team members and participants. RESPONSIBILITIES Interpret project plans, specifications, and details for subcontractors and craft persons Work with Project Manager for fee payments or recurring permit expenses Develop and maintain: Material Tracking List, Project Test and Inspection Listing, Concrete Placement Log, Non-Conformance Report Manage, create, and distribute contract documents Establish handling procedures for electronic documents, including Request for Information (RFI) and correspondence Incorporate all processes and procedures that support the project closeout phase Manage all aspects of testing and inspection processes for the construction quality management program Manage submittals Develop and distribute RFIs and Change Orders Responsible for the mentoring, management, and timely performance evaluation of field engineers Other duties as assigned, including: Determine alternative work methods as needed Coordinate safety and compliance for all team member Maintain schedule of timelines and follow through until completion QUALIFICATIONS Minimum of two years related construction experience Detail orientation sufficient to organize and effectively manage multiple tasks Possess basic understanding of construction law and generally accepted business practices Strong teamwork orientation, initiative, communication, and problem-solving skills Proven positive and professional attitude and customer service skills Current driver's license A few benefits offered include: (for Non-Craft & Non-Union Craft working 25+ hours / week) Medical and prescription drug plans that includes no additional cost vision coverage Dental plan 401k retirement plan with a generous Mortenson match Paid time off, holidays, and other paid leaves Employer paid Life, AD&D, and disability insurance No-Cost mental health tool and concierge with extensive work-life resources Tuition reimbursement Adoption Assistance Gym Membership Discount Program The base pay range for this role is $82,000 - $110,700. (Actual range is higher for the following office locations: Denver, CO and Chicago, IL - 5%, Seattle, WA, and Portland, OR - 10%, Washington, D.C. - 12.5%) #LI-SV1 Base pay is positioned within the range based on several factors including an individual's knowledge, skills, and experience, with consideration given to internal equity. Please make note: Visa sponsorship is not offered for this position. Our postings are typically open a minimum of 5 days and an average of 44 days. ABOUT MORTENSON As a top builder, developer, and EPC (Engineering, Procurement, and Construction), our expertise spans markets like sports, renewable energy, data centers, healthcare, and more. We are builders at heart, working to ensure the built environment has a lasting positive impact. Let's Redefine Possible Equal Employment Opportunity Your uniqueness brings new and creative perspectives to the team. Mortenson is committed to providing equal opportunities of employment (EOE) to all individuals, regardless of your race, religion, gender, national origin, age, veteran status, disability, marital status or any other legally protected category. Other Items to Note Mortenson reserves the right to hire any individual without legal or financial obligation on unwanted solicitations. No agency emails, calls, or solicitations are accepted without a valid agreement. Must be currently legally authorized to work in the U.S. without sponsorship for employment visa status (e.g., H1B status, 0-1, TN, CPT, OPT, etc.). We are unable to sponsor or take over sponsorship of an employment Visa at this time.

The Electrical Supervisor/Engineer position is located at our Dodson Lumber facility in Dodson, LA. This position plans and leads the daily activities of a small team of electricians in the areas of safety, quality and maintenance for all equipment and buildings in order to meet the departmental and unit goals. This position reports to the Maintenance Superintendent. The Electrical Supervisor/Engineer will also be responsible for leading team meetings & trainings, identifying safety, environmental, quality & production issues, coordinate activities with production team to maximize productivity and minimize cost, reduce waste and taking measures to proactively address all concerns. Additionally, the Electrical Supervisor/Engineer leads the team by proactively resolving employee issues, builds team work, and ensures adherence to all applicable site policies and procedures in a fair and consistent manner. Key Functions: Primary responsibility of leading a team of electricians to meet departmental and unit goals in equipment and building safety, quality and maintenance. Also, will implement preventive and predictive maintenance methods and systems to reduce unscheduled downtime and utilize reliable troubleshooting methods to ensure production volume, quality and overall uptime goals are met. The supervisor will plan, develop, manage and provide effective leadership for the maintenance team through: Ensure the safety of all associates by identifying safety issues and taking measures to proactively address concerns Actively supervise and develop the electrical maintenance team to ensure effective communication across & between shifts and with the production teams Utilize preventive maintenance systems to reduce unscheduled downtime Efficient use of reliable troubleshooting methods to ensure uptime, production volume and quality goals are met Effective use of training resources to maximize team technical skills Use computer-based programs to support effective prioritization of maintenance requests, manage maintenance inventory, and delegate maintenance resources About our Wood Products Business We manufacture and sell an innovative collection of proven structural framing materials to the residential, multi-family and light commercial markets, and also provide seamless building solutions, from design to installation to support. This team moves fast, works smart and never stops pushing to be and stay number one in the industry. . The following qualifications are required: Bachelor's Degree in an Engineering discipline Minimum 3 years experience in a supervisory role in an industrial environment Able to manage a union hourly work force Demonstrated ability to lead a team to a high level of safety performance Work related experience in leading and ensuring compliance with safety initiatives Knowledgeable in the areas of electrical, mechanical and PLC programming Proven expertise in preventive and predictive maintenance methods Ability to read and understand electrical, loop , drives system schematics Ability to identify root cause of problems and effectively initiate immediate corrective action to prevent reoccurrence Excellent interpersonal, written, verbal and electronic communication skills Demonstrated ability to raise performance by building and maintaining positive relationships with all associates through coaching, development and instilling a continuous improvement mind-set Strong planning and organizational skills Strong work ethic, good judgment and decision-making skills Must have track record of consistently demonstrating leadership skills as well as positive influence and accomplishments in proactively influencing safety, environmental, quality, productivity and people development Demonstrated basic computer skills and proficiency in MS Office, other windows based programs and internet skills Must be able to accept and respond to after hour's calls Must be willing to work a weekend adjusted schedule Excellent communications (verbal and written) to include technical writing and presentations Working knowledge of business and financial concepts Demonstrated results in achieving and sustaining business goals The following qualifications are preferred: PLC Expert Working knowledge of business and financial concepts Demonstrated results in achieving and sustaining business goals Additional Information All your information will be kept confidential according to EEO guidelines. Direct Staffing Inc

Job Description The Field Engineer will support construction operations on a hyperscale, mission critical project with emphasis on precision in concrete and foundation scopes. The role ensures accurate layout, documentation, sequencing, and technical compliance during high-volume, fast-track construction involving extensive concrete and heavy civil elements. Requirements · Perform survey layout, elevations, and dimensional checks for formwork, embeds, anchor bolts, and rebar placement. · Review shop drawings, rebar details, and post-tensioning layouts to ensure conformance with design. · Track pour cycles, coordinate logistics for ready-mix deliveries, and verify compliance with mix designs and curing protocols. · Monitor field testing (slump, air, temperature, cylinders) and confirm corrective actions for non-conforming results. · Maintain detailed concrete pour logs including placement sequence, finish type, weather impacts, and testing results. · Draft RFIs and coordinate with design teams to resolve field issues like rebar congestion, embed conflicts, or formwork tolerances. · Assist in planning mass pours, including sequencing of trucks, pump placement, finishing crews, and curing strategies. · Support QA/QC through daily inspections of reinforcement, formwork, and post-tension stressing documentation. · Update as-built drawings to reflect rebar, PT tendon, sleeve, and embed changes. · Collaborate with testing labs, suppliers, and subcontractors to ensure quality and schedule alignment. Qualifications · 3-7 years of field engineering experience with emphasis on concrete, foundations, and structural systems. · Proficiency in survey instruments (total station, GPS, laser levels) for layout and verification. · Strong knowledge of ACI, ASTM, and PCA standards governing structural concrete work. · Experience supporting mass pours, mat foundations, and elevated post-tensioned decks. · Ability to interpret structural drawings, rebar shop drawings, and post-tensioning installation details. · Familiarity with curing methods (water, blankets, compounds, steam), finishing techniques, and tolerance requirements. · Proficient in construction management software (Procore, BIM tools, scheduling systems).

Field Engineering Responsibilities: Closeout Redlines Test Audits Lessons learned Warranties Product Submittals Redline(s): The leads and superintendents will oversee submitting changes to SoW. Redlines shall be completed and submitted to engineering be Field Engineers. Engineering will create internal calendar to keep track of what needs to be done, and when it needs to finalized. Build-out will be the most redlining, given measurements, equipment placements, and grounding/bonding. Field Engineers will check and verify that all infrastructure is installed to design/spec, and if there is any changes, they will finalize redlines for closeout. Fiber: The use of an internal tracker will be the key to most of the redlines for ISP. The design given by IES customers will updated to reflect most of the past changes. Field Engineers will check and verify all of the Fiber scope. Copper: The internal tracker for copper should provide all the information needed for close-out. The Field Engineer may be the POC to ensure everything is installed to print, and if there is any changes, will redline and submit for review. The Field Engineer will check and verify these before close-out. Network: If needed, and confirmed that implementing redlines for Network is needed, the Field Engineer will work with the team to configure the details. If we are to redline these, the Field Engineer will take on most of those responsibilities. RFI referencing/implementation: The Field Engineer will be referencing the RFIs on the redlines as a final task before sending for QA review. Test Audit(s): Everything to do with Audits will be ran and verified by the Field Engineer after the projects are complete. Included in this responsibility is verifying the cable schedule and building the projects in a fashion that is easy for the team, once the audit process begins. 100% verification that the testing projects match the prints. All testing projects should be created and available to the team as soon as the areas are ready. Once the team starts testing, the Field Engineer will start running audits as soon as each post is done. If there are any re-test, he/she will send those out to the team with an expected completion date. Then the Field Engineer will finalize audits once retest are completed. This will all be based upon the schedule in which we will have actualized dates to reference and plan out the project creation phase, and the close-out audit phase. Once each area is completely audited and 100% the Field Engineer will start conforming the testing audit package. Lessons Learned: Between all engineers and QA this document should be actively updated throughout the actual build. At the end of each project the teams will get together and finalize/review the standardized lessons learned template for submitting. The information used for this document will be coming off of the lessons learned tracker. The installation teams should be actively filling those out throughout the build. Warranties: These will be done by the Field Engineer. This happens towards the end of the build, in which the Field Engineer will gather all the information to send for processing/completion. A designated team member will send the required documents to receive the required warranties. Product Submittals: The Field Engineer will complete product submittals. This submittal is the very first one to complete once the RFP is issued. The template is usually copy/paste, with a few additions/subtractions. Verifying the BOM with the POs, as well as obtaining product sheets is required for this submittal. Labels: The Field Engineer will help print off labels for the installation teams. Ideally, having all the labels printed before installation will help in not wasting time throughout the build. We have bins that are organized per area, and a sign out sheet for the leads. We require an email sent to the engineering teams with any reprints needed, and the reason for the reprint. RFI's: A the Field Engineer can, or may, be the main engineer to oversee all RFIs before submission. The Field Engineer will conform and submit, as a collaborative effort for. One important thing to note, when an RFI is issues and there is design related feedback, that will automatically be entered as a lessons learned by the engineering team. Any RFI acceptance/rejections will be formally sent out to the applicable teams, by the Field Engineer. Design (Shop Drawings): The Field Engineer can, or may oversee all work concerning design. This will include verifying and brainstorming areas of interest (where quality has lacked), reviewing and submitting into BIM360, as well as keeping up with revisions, hyperlinks, etc. Areas of focus: Infrastructure (Grounding/Bonding) Copper Fiber Detail sheet(s) Min USD $42. 00/Hr. Max USD $47. 00/Hr. Qualifications Physical and Mental Requirements: Must be self-motivated, positive in approach, professional and lead others to create, develop and implement project process improvement(s). Must promote the Company culture and mission to all employees, vendors, clients and business partners. Must have proven problem solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s). Must be able to diagnose and fix problems with existing equipment and new installs. Must be enthusiastic, passionate, patient and a critical thinker. Must be able to communicate with the customer and have excellent customer service skills. Must have proven high skill level to interpret blueprints and other project documents, including but not limited to, specifications, reporting and quality requirements. Must able to travel within branch territory and/or regional territory as needed. Education, Certification, License, and Skill Requirements: Must have at least a High School diploma or GED equivalency; Bachelor's Degree preferred. Will have at least 3-4 year's commercial low-voltage/structured cabling experience. Must be able to work well with other people Must be proficient with Microsoft Office (Word, Excel and MS Project). Must meet Company minimum driving standards. Must be able to manage multiple tasks/projects simultaneously. Must have demonstrated verifiable ability to define a project, create a project scope of work, develop detailed associated tasks and manage these to final completion and customer turnover. Minimum Years of Experience 0-2 License Required No Minimum Education High School Overview IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets. IES is publicly traded on NASDAQ under the symbol IESC. As of the end of IES's 2024 fiscal year ending September 30, 2024, IES produced over $2. 8+ billion in revenue and employed over 9,485 employees at over 131 domestic locations across the United States. IES is an Equal Employment Opportunity Employer: Minorities, Females, Gender Identity, Sexual Orientation, Individuals with Disabilities, Protected Veterans Encouraged to Apply EEO Statement PLEASE NO AGENCY CALLS. NOTE TO ALL AGENCIES: Any unsolicited agency resumes or agency represented candidates that are presented to any IES employee without first having a signed contract between that agency and the IES Talent Acquisition organization will become the property of IES and no fees will be paid. EEO & Affirmative Action The IES policy on equal employment opportunity prohibits discrimination based on race, color, religion, national origin, sex, age, gender identity, sexual orientation, individuals with disabilities, protected veterans, or any other protected status or characteristic. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment, and also states that retaliation against any employee who files a complaint regarding possible violations of this policy will not be tolerated. IES is also committed to taking affirmative steps to promote the employment of minorities, women, individuals with disabilities, and protected veterans. IES develops affirmative action programs to support its commitment to equal employment opportunity, consistent with company policy and the company's obligations as a contractor to the United States government. View Your Equal Employment Opportunity rights under the law. "EEO is the Law" poster | "EEO is the Law" poster supplement View IES' policy on Pay Transparency Pay Transparency NonDiscrimination Poster Disability Accommodation IES is an Equal Opportunity/Affirmative Action Employer. IES provides reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Title I of the Americans with Disabilities Act of 1990. Applicants who need accommodation in the job application process should contact the IES corporate office at ************** or any IES office to request assistance. IES Participates in E-Verify E-Verify Information English/Spanish Right to Work English Spanish #LI-OnsiteField Engineering Responsibilities: Closeout Redlines Test Audits Lessons learned Warranties Product Submittals Redline(s): The leads and superintendents will oversee submitting changes to SoW. Redlines shall be completed and submitted to engineering be Field Engineers. Engineering will create internal calendar to keep track of what needs to be done, and when it needs to finalized. Build-out will be the most redlining, given measurements, equipment placements, and grounding/bonding. Field Engineers will check and verify that all infrastructure is installed to design/spec, and if there is any changes, they will finalize redlines for closeout. Fiber: The use of an internal tracker will be the key to most of the redlines for ISP. The design given by IES customers will updated to reflect most of the past changes. Field Engineers will check and verify all of the Fiber scope. Copper: The internal tracker for copper should provide all the information needed for close-out. The Field Engineer may be the POC to ensure everything is installed to print, and if there is any changes, will redline and submit for review. The Field Engineer will check and verify these before close-out. Network: If needed, and confirmed that implementing redlines for Network is needed, the Field Engineer will work with the team to configure the details. If we are to redline these, the Field Engineer will take on most of those responsibilities. RFI referencing/implementation: The Field Engineer will be referencing the RFIs on the redlines as a final task before sending for QA review. Test Audit(s): Everything to do with Audits will be ran and verified by the Field Engineer after the projects are complete. Included in this responsibility is verifying the cable schedule and building the projects in a fashion that is easy for the team, once the audit process begins. 100% verification that the testing projects match the prints. All testing projects should be created and available to the team as soon as the areas are ready. Once the team starts testing, the Field Engineer will start running audits as soon as each post is done. If there are any re-test, he/she will send those out to the team with an expected completion date. Then the Field Engineer will finalize audits once retest are completed. This will all be based upon the schedule in which we will have actualized dates to reference and plan out the project creation phase, and the close-out audit phase. Once each area is completely audited and 100% the Field Engineer will start conforming the testing audit package. Lessons Learned: Between all engineers and QA this document should be actively updated throughout the actual build. At the end of each project the teams will get together and finalize/review the standardized lessons learned template for submitting. The information used for this document will be coming off of the lessons learned tracker. The installation teams should be actively filling those out throughout the build. Warranties: These will be done by the Field Engineer. This happens towards the end of the build, in which the Field Engineer will gather all the information to send for processing/completion. A designated team member will send the required documents to receive the required warranties. Product Submittals: The Field Engineer will complete product submittals. This submittal is the very first one to complete once the RFP is issued. The template is usually copy/paste, with a few additions/subtractions. Verifying the BOM with the POs, as well as obtaining product sheets is required for this submittal. Labels: The Field Engineer will help print off labels for the installation teams. Ideally, having all the labels printed before installation will help in not wasting time throughout the build. We have bins that are organized per area, and a sign out sheet for the leads. We require an email sent to the engineering teams with any reprints needed, and the reason for the reprint. RFI's: A the Field Engineer can, or may, be the main engineer to oversee all RFIs before submission. The Field Engineer will conform and submit, as a collaborative effort for. One important thing to note, when an RFI is issues and there is design related feedback, that will automatically be entered as a lessons learned by the engineering team. Any RFI acceptance/rejections will be formally sent out to the applicable teams, by the Field Engineer. Design (Shop Drawings): The Field Engineer can, or may oversee all work concerning design. This will include verifying and brainstorming areas of interest (where quality has lacked), reviewing and submitting into BIM360, as well as keeping up with revisions, hyperlinks, etc. Areas of focus: Infrastructure (Grounding/Bonding) Copper Fiber Detail sheet(s)

Job Title: Project Engineer Work Place Flexibility: Onsite Legal Entity: Entergy Services, LLC Please note: Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position. **Selected candidate will be placed at title of Engineer Sr Lead or Sr Staff based on education, experience, and demonstrated success at the Engineer level.** **This is an onsite role that may be filled at multiple site locations within Entergy's Territory. Those outside these areas will need to relocate. Relocation Assistance is available for this posting.** JOB SUMMARY/PURPOSE As a key member of the Project Management team, the Project Engineer is responsible for the management and coordination of all technical aspects of new power generation capital projects. This role ensures that engineering is aligned with corporate goals and is complete, accurate and constructible for all elements of a project's scope. The Project Engineer oversees contractor's engineering performance and coordinates all contractor and owner's engineering interfaces in addition to ensuring projects are completed according to project construction drawings and in accordance with project specifications, quality, and performance requirements. This position is responsible for coordinating efforts of cross-functional teams and building effective relationships with key internal/external stakeholders, including contractors. The Project Engineer is required to work directly with the Project Manager and Project Controls Specialist to ensure process alignment and compliance. JOB DUTIES/RESPONSIBILITIES Promotes safe behavior, in accordance with Company expectations, and adherence to the safety rules on the project. Identifies engineered safety controls and hazard removal during engineering design and coach to safe practices in the field. Supports/Leads cross-functional team consisting of internal Subject Matter Experts, Owners Engineers, EPC Contractors, and Technical Consultants from development of EPC contract through Permitting, Engineering, Construction, Commissioning and Closeout. Ensures documentation of engineering and construction quality is adequately captured to support audit and prudency review. Supports/Leads Owner team in writing official Records of Decision to capture prudency of major project decisions. Acts as Contract Manager for various engineering and construction contracts outside of the EPC, including Owner's Engineer. Performs/Manages the review of engineering design to assure compliance with the contract, permits, codes, and utility standards while ensuring design supports the strategic, operational and maintenance goals of the project. Coordinates with the Project Manager in following the Project Delivery System and ensuring requirements are met and producing associated deliverables. Participates in contractor/vendor selection process with a specific goal of assessing engineering experience, competenciescompetencies, and capability. Supports/Leads technical open book engineering process with contractors during development of major projects and applies value engineering concepts to ensure projects are competitive. Assists Contractor and Vendors during design and construction to resolve technical queries, and interfaces. Assures that all firms solicited to provide engineering services are duly licensed in the state of the project. Assures Project compliance with NERC and Security Standards. Ensures all documents generated on the project are stored in designated repository at closeout. Supports/Leads/Follows change management process for any potential design changes. Participates in the equipment inspection activities as agreed with the Contractor. Supports/Leads Owner review and signoff of System Turnover packages from Construction to Start-up and from EPC to Owner. Supports commissioning and ensures performance, reliability and emissions testing are completed per contract. MINIMUM REQUIREMENTS Minimum education required of the position. Bachelor of Science degree in Engineering. Advanced degree preferred. Minimum experience required of the position. Project Engineer, Sr Lead: 10+ years of applicable and progressive professional experience, preferably engineering design, construction or operation of instrument and controls, distributed control systems, turbine control systems, and electrical systems. (8 years with a PE/PMP Certification/Masters Degree) Project Engineer Sr Staff: 12+ years of applicable and progressive professional experience, preferably engineering design, construction or operation of instrument and controls, distributed control systems, turbine control systems, and electrical systems (10 years with a PE/PMP Certification/Masters Degree) Minimum knowledge, skills and abilities required of the position. Excellent technical writing and verbal communication skills with strong computer skills and proficiency in Microsoft Office 360. Strong interpersonal skills and leadership behaviors. Expert knowledge of engineering fundamentals within at least one discipline (civil/mechanical/electrical/controls/chemical/construction) Advanced knowledge of the practical application of engineering science and technology to power generation. This includes applying principles, techniques, procedures, and equipment to the design of electrical power generating facilities. Knowledge of materials, methods, and the tools involved in the construction or repair of power generation facilities and associated QA/QC protocol. Knowledge of permits required for construction and operation of power generation facilities. Experience with reviewing, executing, and managing large EPC contracts. Advanced critical thinking skills and capability to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Adept in complex problem solving; able to identify complex problems and review related information to develop and evaluate options and implement solutions. Any certificates, licenses, etc. required for the position. Desired: Professional Engineer license and PMP certification. #LI-NC1 Primary Location: Louisiana-Delhi Louisiana : Delhi Louisiana : Monroe Mississippi : Vicksburg Job Function: Professional FLSA Status: Professional Relocation Option: Level II Union description/code: NON BARGAINING UNIT Number of Openings: 1 Req ID: 121318 Travel Percentage:Up to 25% An Equal Opportunity Employer, Minority/Female/Disability/Vets. Please click here to view the EEI page, or see statements below. EEO Statement: The Entergy System of Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws. The Entergy System of Companies complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment including, but not limited to, recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The Entergy System of Companies expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of the Entergy System of Company employees to perform their expected job duties is absolutely not tolerated. Accessibility: Entergy provides reasonable accommodations for online applicants. Requests for a reasonable accommodation may be made orally or in writing by an applicant, employee, or third party on his or her behalf. If you are an individual with a disability and you are in need of an accommodation for the recruiting process please click here and provide your name, contact number, the accommodation requested and the requisition number that you are requesting the accommodation for. Employee Services will contact you regarding your request. Additional Responsibilities: As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. Entergy Pay Transparency Policy Statement: The Entergy System of Companies (the Company) will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Company's legal duty to furnish information. 41 CFR 60-1.35(c). Equal Opportunity and Pay Transparency. Pay Transparency Notice: Pay Transparency Nondiscrimination Provision (dol.gov) The non-confidential portions of the affirmative action program for individuals with disabilities and protected veterans shall be available for inspection upon request by any employee or applicant for employment. Please contact ************************ to schedule a time to review the affirmative action plan during regular office hours. WORKING CONDITIONS: As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties. Please note: Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position.

Department: Engineering Travel: Up to 25% **If you are a GPI employee, please click the Employee Login before applying. (********************************************************** **At Graphic Packaging International, we produce the paper cup that held your coffee this morning, the basket that transported those bottles of craft beer you enjoyed last weekend, and the microwave tray that heated your gourmet meal last night. We're one of the largest manufacturers of paperboard and paper-based packaging for some of the world's most recognized brands of food, beverage, foodservice, household, personal care and pet products. Headquartered in Atlanta, Georgia, we are collaborative, diverse, innovative individuals who create inspired packaging while giving back to our communities.** **With over 25,000 employees working in more than 130 locations worldwide, we strive to be environmentally responsible in our industry and in the communities where we operate. We are committed to workplace diversity and offer compensation and benefits programs that are among the industry's best to reward the talented people who make our company successful.** **If this sounds like something you would like to be a part of, we'd love to hear from you.** **A World of Difference. Made Possible.** **JOB SUMMARY:** General Project Engineering focuses on designing, communicating, and implementing an operational plan for completing an engineering-based project including: Preparing designs, project controls and specifications, schedules, cost estimates, production, transportation, installation, testing and/or commissioning of new infrastructure, facilities, equipment, etc. Monitoring progress and performance against the project plan; taking action to resolve operational problems and minimize delays. Identifying, developing, and gathering the resources necessary to complete the project. May include preparing engineering standards, designs and work specifications; developing project schedules, budgets and forecasts; and selecting materials, and equipment. **ESSENTIAL DUTIES & RESPONSIBILITIES:** ·Responsible for the monitoring and achievement of operational and/or financial results for their area of responsibility. ·Progression within the levels reflects increase in scope and responsibilities as well as growth in business and industry experience and broad technical expertise. ·Manages subordinate management and/or experienced specialist employees who exercise significant latitude and independence. ·Often heads one or more departments. ·Allocates resources to align with business objectives and annual business plans. ·Works on issues where analysis of situations or data requires an in-depth knowledge of organizational objectives. ·Requires a comprehensive understanding of concepts and principles in own discipline and knowledge of other disciplines. ·Solves complex problems leveraging resources within or outside the organization. ·Implements strategic policies when selecting methods, techniques, and evaluation criteria for obtaining results. ·Applies knowledge of key business drivers and factors that maximize performance to area of responsibility. ·Establishes operating policies and procedures that affect departments and subordinate sections and work units. ·Interprets company-wide policies and procedures. ·Develops and assures adherence to budgets, schedules, work plans, and performance requirements. ·Assignments are objective oriented; work is reviewed in terms of meeting the organization's objectives and timelines. ·Decisions have an extended impact on work processes and outcomes. ·Errors in judgment or failure to achieve results may cause critical delays and modifications to projects or operations and substantial expenditure of resources. ·Interacts frequently with internal and external leadership and senior-level customer representatives concerning projects, operational decisions, scheduling requirements, and/or contractual clarifications. ·Leads briefings and technical meetings for internal and external representatives. **POSITION REQUIREMENTS:** ·Bachelor's in Engineering degree or related work experience required in lieu of degree. The candidate must be able to perform the essential functions of the position satisfactorily, with or without a reasonable accommodation. Graphic Packaging retains the right to change or assign other duties to this position. **KEY COMPETENCIES** ·Business acumen ·Curiosity ·Interpersonal skills ·Influence skills ·Self-starter ·Negotiation skills ·Organization skills ·Results oriented **Graphic Packaging is an Equal Opportunity Employer. All candidates will be evaluated on the basis of their qualifications for the job in question. We do not base our employment decision on an employee's or applicant's race, color, religion, age, gender or sex (including pregnancy), national origin, ancestry, marital status, sexual orientation, gender identity, genetic identity, genetic information, disability, veteran/military status or any other basis prohibited by local, state, or federal law. Click here to view the Poster, EEO is the Law. (****************************************************************************************************** ** ** **Nearest Major Market:** Monroe

DPR Construction is seeking a self-perform project engineer with at least 1 year of commercial construction experience for our self-perform work group. Project engineering will be on commercial projects within our core markets: healthcare, advanced technology, higher education, life sciences, and corporate office, specifically for our self-perform services. The project engineer will work closely with all members of the project team and the self-perform work group, and will be responsible for the following: Working knowledge of contract with owner. Working knowledge of subcontracts with tiered trade contractors and material vendors. Prepare work scopes packages. Organize & maintain cost structure. Prepare, monitor and update scope(s) schedule. Help maintain weekly work plans and implementation of lean construction methods. Document schedule impacts to project. Identify changes in the project. Distribute change documents to all field personnel. Prepare estimates of DPR's change order work. Assemble, submit, and complete accurate change request in accordance with owner contact requirements. Expedite approval of change orders. Attend and document minutes at owner/architect meeting, subcontractor meeting, staff meeting and other meetings; follow through on action items. Attend and participate in bi-weekly self-perform team meeting, providing critical updates around project parameters. Participate in and apply DPR's environmental health and safety plan to constantly maintain injury-free environments. Assist foremen and field crews in the implementation of DPR policies and the execution of the project. Assist and organize the duties of the field staff. Provide direction, prioritization, performance feedback and coordination to ensure all job duties and project requirements are fulfilled. Complete 3 safety jobsite audits weekly Financial Reports - Assist Project manager in: Updating pertinent project information relating to labor, productivity, and cash flow. Keep all cost, commitment and projection information current in the company job costing system. Preparing monthly progress reports by incorporating all new subcontract change amounts, material purchases costs to date and change orders. Preparing monthly fee and cost status reports. Prepare owner billing by assembling DPR costs, receiving and reviewing subcontractor/material invoices and organizing the documents in accordance with the owner's requirements. Prepare and monitor labor cost reports and job records including: Daily site walks and safety reporting. Evaluation of construction activities. Prepare and monitor equipment and material coding logs. Monitor safety inspection and accident logs and reports. Record official notices: warranties/guarantees. Maintain request for information log. Distribute new drawings, changes, approved submittals, RFI responses and other project information to all affected parties. Act as purchasing agent under lead foremen's and project manager's direction. Assist with scheduling and expediting material, equipment purchases and delivery. Identify and expedite long lead items. Schedule and expedite submittals of shop drawings, samples, and supplier data for timely approval. Schedule tiered subcontractor work and ensure subs are ready on schedule. Manage the shop drawings packages such as concrete forms and wall frame detailing. Participate and aide in job layout. Verify elevations and dimensions, providing adequate information for field crew completeness. Review all vendor shop drawings, product data, samples, manuals, etc. for all compliance with contact documents and coordination with all other items of work. Seek and study problems, conflicts, incomplete or ambiguous design information and any other questions/issues presented by subs, vendors, designers, DPR crews and staff or others. Resolve all promptly including, when necessary, interfacing with designers, engineers or the owner. Document solutions using RFI. Distribute to all affected parties. Qualifications We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: Excellent listening skills and strong communication skills. Ability to identify and resolve complex issues. Effective participation in team environment. Proficient computer skills in Microsoft Office Suite, project management software (CMiC or similar), and (not necessary but preferred) On Screen Take Off and Quick Bid. 1+ years of experience as a project engineer, preferably within DPR's core market projects. Bachelor's degree in construction management, engineering or related field. A strong work ethic and a “can-do” attitude. This position is salaried. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Mortenson is currently seeking a MEP Project Engineer I (Mechanical Focused) that will be responsible for providing analysis, management, and resolution for Mechanical, Electrical, and Plumbing (MEP) field coordination issues with project team members and participants. RESPONSIBILITIES Interpret project plans, specifications, and details for subcontractors and craft persons; implement the pre-construction quality plan and obtain/maintain necessary construction permits Develop and maintain Material Tracking List, Project Test and Inspection Listing, Non-Conformance Report, and equipment coordination matrices; manage contract documents and lead the 3-D coordination process Establish handling procedures for electronic documents, including RFIs and correspondence; incorporate processes and procedures that support the project closeout phase Manage all aspects of testing and inspection processes for the construction quality management program, including implementing the three-phase inspection system and assisting the commissioning process Manage submittals, set up register, prepare transmittal forms, coordinate submittal processing, and expedite submittals to ensure material deliveries align with the project schedule; communicate submittal process details to subcontractors and suppliers Provide periodic updates of the submittal register to the customer or architect; coordinate subcontractor details, verify insurance, prepare paperwork, and request final payment; lead project closeout activities Develop and distribute RFIs and Change Orders; implement procedures for posting revisions and updates to as-built construction documents; incorporate subcontractor as-built documentation in contract document revisions Determine alternative work methods, coordinate safety and compliance, maintain schedule timelines, and effectively work and build relationships with those of diverse backgrounds and organizational levels QUALIFICATIONS Bachelor's degree in Construction, Civil, Architectural, Mechanical, or Electrical Engineering, or equivalent field experience Minimum one year of construction experience, preferably with a Mechanical or Electrical Contractor Current driver's license Detail-oriented with the ability to organize and manage multiple project tasks Basic understanding of construction law and generally accepted business practices Strong teamwork orientation, initiative, communication, problem-solving, and leadership skills Intermediate Microsoft Office, project, and pertinent web application skills Positive and professional attitude with strong customer service skills Ability to interpret and communicate Mortenson policies Active listening skills and effective communication including openness to diverse input and feedback Ability to travel up to 100% A few benefits offered include: (for Non-Craft & Non-Union Craft working 25+ hours / week) Medical and prescription drug plans that includes no additional cost vision coverage Dental plan 401k retirement plan with a generous Mortenson match Paid time off, holidays, and other paid leaves Employer paid Life, AD&D, and disability insurance No-Cost mental health tool and concierge with extensive work-life resources Tuition reimbursement Adoption Assistance Gym Membership Discount Program The base pay range for this role is $82,000-110,700 (Actual range is higher for the following office locations: Denver, CO and Chicago, IL - 5%, Seattle, WA, and Portland, OR - 10%, Washington, D.C. - 12.5%). Base pay is positioned within the range based on several factors including an individual's knowledge, skills, and experience, with consideration given to internal equity. This position is eligible for Mortenson's incentive plan. #LI-SV1 Visa sponsorship is not offered for this position. Our postings are typically open a minimum of 5 days and an average of 44 days. ABOUT MORTENSON As a top builder, developer, and EPC (Engineering, Procurement, and Construction), our expertise spans markets like sports, renewable energy, data centers, healthcare, and more. We are builders at heart, working to ensure the built environment has a lasting positive impact. Let's Redefine Possible Equal Employment Opportunity Your uniqueness brings new and creative perspectives to the team. Mortenson is committed to providing equal opportunities of employment (EOE) to all individuals, regardless of your race, religion, gender, national origin, age, veteran status, disability, marital status or any other legally protected category. Mortenson reserves the right to hire any individual without legal or financial obligation on unwanted solicitations. No agency emails, calls, or solicitations are accepted without a valid agreement. Must be currently legally authorized to work in the U.S. without sponsorship for employment visa status (e.g., H1B status, 0-1, TN, CPT, OPT, etc.). We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Field Engineering Responsibilities: Closeout Redlines Test Audits Lessons learned Warranties Product Submittals Redline(s): The leads and superintendents will oversee submitting changes to SoW. Redlines shall be completed and submitted to engineering be Field Engineers. Engineering will create internal calendar to keep track of what needs to be done, and when it needs to finalized. Build-out will be the most redlining, given measurements, equipment placements, and grounding/bonding. Field Engineers will check and verify that all infrastructure is installed to design/spec, and if there is any changes, they will finalize redlines for closeout. Fiber: The use of an internal tracker will be the key to most of the redlines for ISP. The design given by IES customers will updated to reflect most of the past changes. Field Engineers will check and verify all of the Fiber scope. Copper: The internal tracker for copper should provide all the information needed for close-out. The Field Engineer may be the POC to ensure everything is installed to print, and if there is any changes, will redline and submit for review. The Field Engineer will check and verify these before close-out. Network: If needed, and confirmed that implementing redlines for Network is needed, the Field Engineer will work with the team to configure the details. If we are to redline these, the Field Engineer will take on most of those responsibilities. RFI referencing/implementation: The Field Engineer will be referencing the RFIs on the redlines as a final task before sending for QA review. Test Audit(s): Everything to do with Audits will be ran and verified by the Field Engineer after the projects are complete. Included in this responsibility is verifying the cable schedule and building the projects in a fashion that is easy for the team, once the audit process begins. 100% verification that the testing projects match the prints. All testing projects should be created and available to the team as soon as the areas are ready. Once the team starts testing, the Field Engineer will start running audits as soon as each post is done. If there are any re-test, he/she will send those out to the team with an expected completion date. Then the Field Engineer will finalize audits once retest are completed. This will all be based upon the schedule in which we will have actualized dates to reference and plan out the project creation phase, and the close-out audit phase. Once each area is completely audited and 100% the Field Engineer will start conforming the testing audit package. Lessons Learned: Between all engineers and QA this document should be actively updated throughout the actual build. At the end of each project the teams will get together and finalize/review the standardized lessons learned template for submitting. The information used for this document will be coming off of the lessons learned tracker. The installation teams should be actively filling those out throughout the build. Warranties: These will be done by the Field Engineer. This happens towards the end of the build, in which the Field Engineer will gather all the information to send for processing/completion. A designated team member will send the required documents to receive the required warranties. Product Submittals: The Field Engineer will complete product submittals. This submittal is the very first one to complete once the RFP is issued. The template is usually copy/paste, with a few additions/subtractions. Verifying the BOM with the POs, as well as obtaining product sheets is required for this submittal. Labels: The Field Engineer will help print off labels for the installation teams. Ideally, having all the labels printed before installation will help in not wasting time throughout the build. We have bins that are organized per area, and a sign out sheet for the leads. We require an email sent to the engineering teams with any reprints needed, and the reason for the reprint. RFI's: A the Field Engineer can, or may, be the main engineer to oversee all RFIs before submission. The Field Engineer will conform and submit, as a collaborative effort for. One important thing to note, when an RFI is issues and there is design related feedback, that will automatically be entered as a lessons learned by the engineering team. Any RFI acceptance/rejections will be formally sent out to the applicable teams, by the Field Engineer. Design (Shop Drawings): The Field Engineer can, or may oversee all work concerning design. This will include verifying and brainstorming areas of interest (where quality has lacked), reviewing and submitting into BIM360, as well as keeping up with revisions, hyperlinks, etc. Areas of focus: Infrastructure (Grounding/Bonding) Copper Fiber Detail sheet(s) Min USD $42. 00/Hr. Max USD $47. 00/Hr. Qualifications Physical and Mental Requirements: Must be self-motivated, positive in approach, professional and lead others to create, develop and implement project process improvement(s). Must promote the Company culture and mission to all employees, vendors, clients and business partners. Must have proven problem solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s). Must be able to diagnose and fix problems with existing equipment and new installs. Must be enthusiastic, passionate, patient and a critical thinker. Must be able to communicate with the customer and have excellent customer service skills. Must have proven high skill level to interpret blueprints and other project documents, including but not limited to, specifications, reporting and quality requirements. Must able to travel within branch territory and/or regional territory as needed. Education, Certification, License, and Skill Requirements: Must have at least a High School diploma or GED equivalency; Bachelor's Degree preferred. Will have at least 3-4 year's commercial low-voltage/structured cabling experience. Must be able to work well with other people Must be proficient with Microsoft Office (Word, Excel and MS Project). Must meet Company minimum driving standards. Must be able to manage multiple tasks/projects simultaneously. Must have demonstrated verifiable ability to define a project, create a project scope of work, develop detailed associated tasks and manage these to final completion and customer turnover. Minimum Years of Experience 0-2 License Required No Minimum Education High School Overview IES is a national provider of industrial products and infrastructure services to a variety of end markets, including electrical, mechanical and communications contracting solutions for the commercial, industrial, residential and renewable energy markets. IES is publicly traded on NASDAQ under the symbol IESC. As of the end of IES's 2024 fiscal year ending September 30, 2024, IES produced over $2. 8+ billion in revenue and employed over 9,485 employees at over 131 domestic locations across the United States. IES is an Equal Employment Opportunity Employer: Minorities, Females, Gender Identity, Sexual Orientation, Individuals with Disabilities, Protected Veterans Encouraged to Apply EEO Statement PLEASE NO AGENCY CALLS. NOTE TO ALL AGENCIES: Any unsolicited agency resumes or agency represented candidates that are presented to any IES employee without first having a signed contract between that agency and the IES Talent Acquisition organization will become the property of IES and no fees will be paid. EEO & Affirmative Action The IES policy on equal employment opportunity prohibits discrimination based on race, color, religion, national origin, sex, age, gender identity, sexual orientation, individuals with disabilities, protected veterans, or any other protected status or characteristic. This policy applies to recruiting, hiring, transfers, promotions, terminations, compensation, benefits, and all other terms and conditions of employment, and also states that retaliation against any employee who files a complaint regarding possible violations of this policy will not be tolerated. IES is also committed to taking affirmative steps to promote the employment of minorities, women, individuals with disabilities, and protected veterans. IES develops affirmative action programs to support its commitment to equal employment opportunity, consistent with company policy and the company's obligations as a contractor to the United States government. View Your Equal Employment Opportunity rights under the law. "EEO is the Law" poster | "EEO is the Law" poster supplement View IES' policy on Pay Transparency Pay Transparency NonDiscrimination Poster Disability Accommodation IES is an Equal Opportunity/Affirmative Action Employer. IES provides reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Era Veterans' Readjustment Assistance Act of 1974 and Title I of the Americans with Disabilities Act of 1990. Applicants who need accommodation in the job application process should contact the IES corporate office at ************** or any IES office to request assistance. IES Participates in E-Verify E-Verify Information English/Spanish Right to Work English Spanish #LI-OnsiteField Engineering Responsibilities: Closeout Redlines Test Audits Lessons learned Warranties Product Submittals Redline(s): The leads and superintendents will oversee submitting changes to SoW. Redlines shall be completed and submitted to engineering be Field Engineers. Engineering will create internal calendar to keep track of what needs to be done, and when it needs to finalized. Build-out will be the most redlining, given measurements, equipment placements, and grounding/bonding. Field Engineers will check and verify that all infrastructure is installed to design/spec, and if there is any changes, they will finalize redlines for closeout. Fiber: The use of an internal tracker will be the key to most of the redlines for ISP. The design given by IES customers will updated to reflect most of the past changes. Field Engineers will check and verify all of the Fiber scope. Copper: The internal tracker for copper should provide all the information needed for close-out. The Field Engineer may be the POC to ensure everything is installed to print, and if there is any changes, will redline and submit for review. The Field Engineer will check and verify these before close-out. Network: If needed, and confirmed that implementing redlines for Network is needed, the Field Engineer will work with the team to configure the details. If we are to redline these, the Field Engineer will take on most of those responsibilities. RFI referencing/implementation: The Field Engineer will be referencing the RFIs on the redlines as a final task before sending for QA review. Test Audit(s): Everything to do with Audits will be ran and verified by the Field Engineer after the projects are complete. Included in this responsibility is verifying the cable schedule and building the projects in a fashion that is easy for the team, once the audit process begins. 100% verification that the testing projects match the prints. All testing projects should be created and available to the team as soon as the areas are ready. Once the team starts testing, the Field Engineer will start running audits as soon as each post is done. If there are any re-test, he/she will send those out to the team with an expected completion date. Then the Field Engineer will finalize audits once retest are completed. This will all be based upon the schedule in which we will have actualized dates to reference and plan out the project creation phase, and the close-out audit phase. Once each area is completely audited and 100% the Field Engineer will start conforming the testing audit package. Lessons Learned: Between all engineers and QA this document should be actively updated throughout the actual build. At the end of each project the teams will get together and finalize/review the standardized lessons learned template for submitting. The information used for this document will be coming off of the lessons learned tracker. The installation teams should be actively filling those out throughout the build. Warranties: These will be done by the Field Engineer. This happens towards the end of the build, in which the Field Engineer will gather all the information to send for processing/completion. A designated team member will send the required documents to receive the required warranties. Product Submittals: The Field Engineer will complete product submittals. This submittal is the very first one to complete once the RFP is issued. The template is usually copy/paste, with a few additions/subtractions. Verifying the BOM with the POs, as well as obtaining product sheets is required for this submittal. Labels: The Field Engineer will help print off labels for the installation teams. Ideally, having all the labels printed before installation will help in not wasting time throughout the build. We have bins that are organized per area, and a sign out sheet for the leads. We require an email sent to the engineering teams with any reprints needed, and the reason for the reprint. RFI's: A the Field Engineer can, or may, be the main engineer to oversee all RFIs before submission. The Field Engineer will conform and submit, as a collaborative effort for. One important thing to note, when an RFI is issues and there is design related feedback, that will automatically be entered as a lessons learned by the engineering team. Any RFI acceptance/rejections will be formally sent out to the applicable teams, by the Field Engineer. Design (Shop Drawings): The Field Engineer can, or may oversee all work concerning design. This will include verifying and brainstorming areas of interest (where quality has lacked), reviewing and submitting into BIM360, as well as keeping up with revisions, hyperlinks, etc. Areas of focus: Infrastructure (Grounding/Bonding) Copper Fiber Detail sheet(s)

DPR Construction is seeking a project engineer with 2+ years of commercial construction experience. The project engineer will work on commercial projects within our core markets: healthcare, higher education, advanced technology, life sciences and commercial. The project engineer will work closely with all members of the project team and will be responsible for the following: Participation and application of DPR's Environmental Health and Safety Plan to constantly maintain injury-free environments including performing weekly safety audits. Understanding and enforcement of contracts, including between DPR and subcontractors as well as DPR and the owner. Assist the superintendent and project manager in the implementation of DPR policies and the execution of the project. Organizing the duties of other engineers, field office coordinator, project accountant and other assigned project staff. This includes providing direction, prioritization, and performance feedback. Participation in trainings and company meetings to facilitate individual and company growth. Organizing and electronically archiving project files for easy access by the project team. Preparation, monitoring, and updating project schedules. Working with the superintendent to reduce project constraints' impact on the schedule. Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builts, testing and inspection logs, RFI logs, and change order logs. Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. Identifying, assembling, negotiating, and distributing change orders to both the owner and subcontractors. Preparing agendas, documents, meeting minutes, and actions for various meetings including owner/architect/contractor meetings, subcontractor coordination meetings, safety meetings, and staff meetings. Participating in project cost control. This includes maintaining internal records and working with subcontractors to make sure changes are getting paid. Preparing owner billing by assembling DPR costs, receiving and reviewing subcontractor invoices and organizing the documents in accordance with the owner's requirements. Monitoring testing and inspection record and reports, safety inspection and accident logs and reports, record building permit inspections and sign-offs. Qualifications We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: Organized work approach with the ability to adapt and adjust as required to support the projects current needs. Detailed knowledge of the assigned project scopes with a 100% hands-on approach. A desire to seek out and resolve construction problems /conflicts that arise during design and construction phases. Goal-orientated approach to promptly coordinate and resolve project issues within the project team (including interfacing with designers, engineers, and owners). Excellent listening and strong communication skills. Ability to identify and resolve complex issues. Effective participation in team environment. Proficient computer skills in Microsoft Office Suite, project management software (CMiC, Prolog or similar), scheduling software (Primavera or similar) and BIM software (AutoCAD, Revit, Navisworks or similar). 2+ years of experience as a project engineer, preferably within DPR's core markets. Bachelor's degree in construction management, civil engineering or related field. A strong work ethic, a “can-do” attitude and a passion for construction. This position is salaried. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************