Field engineer jobs in Penn Hills, PA - 277 jobs

Field Engineer responsibilities primarily include traveling to field locations to conduct various operations on clients' oil and gas wells. The candidate will work a rotational schedule to shadow experienced WOS specialists to gain hands-on experience, technical knowledge, and safe practices. At the discretion of both the candidate and WOS, the candidate can transition to an office-based role with duties including tool design, performance analysis, prototype development, and project management. To be successful in this role, the candidate should be comfortable with learning new tasks and working independently with high attention to detail. Roles and Responsibilities Learn WOS field operation procedures in the areas of frac plug drillouts, setting/pulling downhole plugs, flowback, casing cleanouts and milling, and fishing Execute field operations independently once fully trained Work in a rotational schedule while traveling between shop and field locations as needed by customer requirements Promote a culture of superior service quality to support customer needs and relations Contribute to a multifaceted team to deliver superior service quality to customers Anticipate issues and assertively solve problems Identify areas of improvement in operations and offer solutions Requirements Bachelor's degree in Petroleum Engineering or equivalent Ability to learn new skills and execute with high attention to detail Ability to troubleshoot issues and work independently Ability to stand for long periods of time, and to lift and carry up to 35lbs Mechanical aptitude is highly preferred Rotational work schedule with travel to field locations and flexibility for time off Safe operation of motor vehicles and comfortability around large equipment

CH Field Engineer (inclusive of Engineer, Senior Engineer & General Engineer) The Cased Hole Field Engineer plays a vital role in managing our crews, following/ promoting our company values, and delivering top-notch service to our clients. This position entails multiple roles toward our field operations' success and driving our visions related to safety and service quality principles. The Cased Hole Field Engineer reports directly to the base Operations Management team. Job Duties • Working knowledge on the operation of heavy equipment of various sizes and weights utilized in wireline operations • Successfully achieve and obtain any required training qualifications associated with the position • Take a role in the planning and preparation for assigned well site operations • Must oversee all pre-job load-outs, checks, and equipment readiness before dispatch to a location • May be required to run services including Cement Bond Logs, Gamma Ray Logs, Noise/Temp Logs, etc. based on current training and knowledge • Provide efficient operation of perforation and setting services related to all completion activities • Be a leader in enforcing and coaching of others in all government, company, and client policies and procedures • Perform and enforce all operations with the highest regard to the safety of all personnel and equipment • Help out in identifying and mentoring all employees in regards to any issues, how to address immediately and report to the appropriate departments on time • Stay updated on any company changes and verify they are being implemented in the field • Work an on-call schedule and dispatch to a job site when needed • Promptly and accurately submits all required reports and data on time • Maintains assigned equipment and facilities to the required standard • Successfully achieve and obtain any required training qualifications associated with the position • Remain current on all third party and company-specific training programs • Take the lead on the training and development of other field personnel • Must give accurate feedback on overall employee and job performances • Any other duties needed to help drive our Vision, fulfill our Mission, and abide by our Organization Values Essential Knowledge, Skills, and Abilities • Ensuring strong quality control principles of perforating, logging, and any additional operations associated with the assigned base • Ability to obtain BATFE clearance for Employee Possessor of explosives • Good background in troubleshooting of cased hole operations, tools, and equipment • Ability to drive and operate the equipment under various working conditions • Working knowledge of methods, materials, and tools used in wireline operations • Background and experience in the identification of hazards and safety precautions common to heavy equipment operations and crew management • Strong working knowledge of DOT and explosives safety regulations • Working background in the mechanical abilities and knowledge of CH operations is a requirement • Must be able to interact professionally with co-workers and clients • Ability to perform manual work requiring periods of extensive physical exertion and potential exposure to weather conditions • Knowledge on understanding and carry out written and oral instructions • Must be able to communicate well both verbally and written • Lead a team to meet all job schedules with dependability and consistency at all times • Strong work ethic and ability to be a team player • Ability to assist/coach in the operation of pressure control equipment and grease injection • Take the lead on all pre and post job checks on all equipment and supplies • A working background with training and mentoring in the operations of rigging-up and down on a job-site • Expert abilities in the assembly, disassembly, maintenance, and operation of all equipment for the job • Working knowledge on how to load, transport, assemble perforating and plug setting equipment Necessary Physical Abilities to Perform Essential Functions Safety of our employees is a key priority of Horizontal. Thus the company must ensure that applicants are physically able to perform certain essential functions of the Cased Hole Engineer position. Applicants should be able to physically perform the following activities (or be able to perform these activities with a reasonable accommodation): • Routinely lift and/or move up to 75 pounds • Sit, speak or listen actively for extended periods of time • Possess full use of both hands to feel or manipulate objects, tools, or controls • Perform an extended reach with arms to manipulate objects, tools, or controls • Walk short distances, sometimes over uneven terrain • Perform manual work requiring periods of extensive physical exertion, sometimes under extreme weather conditions Qualifications • High School/GED, Undergraduate degree in Geology or Engineering preferred • Must have at a minimum a class C w/Hazmat CDL license • Must be able to read and interpret documents such as safety manuals, operational instructions, and policies/procedures • Must be able to take the lead in effectively communicating with peers, subordinates, and supervisors • Possess a strong ability to solve problems in the practical field and interpret data presented in written, diagrammatic or schedule form • Ability to apply advanced math skills to practical situations • Ability to solve problems in practical field situations and interpret data presented in written, diagrammatic or schedule form

WHO ARE WE? PEG, LLC is in its twenty-seventh year being a diverse energy efficiency, engineering, environmental and management consulting firm operating principally in the Eastern and Central United States. As a leader in Home Energy Ratings, a winner of multiple Energy Star Awards, and a standout in the construction industry, PEG has provided Home Energy Ratings for over 250,000 homes. Our mission is to deliver innovative, data-driven solutions that support high-performance buildings, sustainable development, and client success across residential and commercial sectors. We strive to continually improve building energy efficiency and therefore, the quality of homes and life in the communities that we service. Please visit our website at ************** to learn more about PEG! WHO ARE YOU? PEG is searching for motivated individuals who are interested in learning about Energy Sustainability and Building Energy Performance of New Residential Construction. This position requires you to become a certified HERS Rater. Learn more at ************** In this position, new employees will be provided with paid on the job training that will prepare them to perform Home Energy Audits in accordance with RESNET Guidelines. This will include visual inspections of materials, data collection and visual observation of energy efficient features, and the utilization of equipment to test system performance. THE ROLE Job Location: The geographical area assigned to this position includes a 100-mile radius with Pittsburgh, PA at its center. Essential Functions: Perform Home Energy Audits in accordance with New Construction RESNET/Energy Star Guidelines including but not limited to: Visual Inspections of applied materials and control assemblies Data Collection and Visual Observation of energy efficient features such as Model and serial numbers of relevant equipment Quality and installation of duct work, insulation, framing, air sealing, ventilation, etc. Utilization of equipment to test system performance such as infiltration & Blower Door Testing, Ventilation Testing, Duct Leakage Testing, and Building Air Flow & Pressure Testing Adjustment of system settings to either meet design or manufacturer specifications Actively develop relationships with builders and code officials through effective and professional communication Prepare an electronic written report of audit findings Complete any necessary paperwork required for internal reporting Maintain equipment in accordance with company policy and manufacturer's specifications Complete all other assigned third-party inspections, as needed, with the designated geographical area Education and/or Experience High School Diploma or General Education Degree or Vocational Certificate in the Skilled Trades Industry is required HERS Rater, Energy Star, Green Building, ACCA 310 HVAC Grading, IECC, HVAC EPA, BPI, and LEED Certifications are a plus! 2 years of work experience in HVAC, home remodeling, or construction is helpful. Physical Demands Must be physically able to fulfill job functions, including lifting up to 50 lbs, carrying equipment, climbing ladders, work in confined spaces (attics/crawl spaces), and using small tools and testing equipment Must enjoy working in the great outdoors Additional Requirements Must be personable, enthusiastic, well-groomed, articulate, and able to convey technical information in plain language Must be adaptable as audit/inspections will fluctuate with client construction schedules. Must be organized, dependable, self-directed, and able to complete projects with limited supervision Must be willing to obtain additional certifications/licenses as required Valid driver's license in good standing with insurable driving record Must have reliable transportation and the ability to travel daily to job sites Must be willing to undergo a background check and/or drug testing, in accordance with local law/regulations Rewards and Benefits PEG LLC offers a comprehensive, total rewards package that includes competitive compensation and a flexible benefits package that reflects our commitment to creating a diverse and supportive workplace. Benefits include: • Company-issued Gas Card, Toll Pass, & Vehicle Maintenance Allowance • Company-issued Uniforms, iPhone/iPad, Field Equipment/Tools/PPE • Flexible Work Schedule • Year Round Employment • Paid Professional Development & Salary Incentives through Learning/Certification Opportunities • 20 Annual Paid Days Off (12 Days of PTO, Birthday PTO, & 7 Company Paid Holidays • Company Sponsored Medical Insurance that includes a contribution of up to 50% off the monthly premium • Dental & Vision Insurance • 401(k) Retirement Plan with up to a 4% company match vested immediately • Basic Life & Supplemental Life • Short-Term & Long-Term Disability • Accident & Pet Insurance • Corporate Sponsored Events • PEG LLC is an Equal Employment Opportunity Employer.

The PDM Field Engineer I is based at a jobsite and is responsible for facilitating the interface between the jobsite and the home office engineering staff. When not assigned to a jobsite, the PDM Field Project Engineer I will be assigned to a Matrix engineering office to perform design and project engineering tasks in support of current projects. Essential Functions Actively supports the Company's commitment to safety and its “Core Values”. Represents the Company at all times with high moral standards while adhering to the Company's “Code of Business Conduct and Ethics”. Assists the construction team with the interpretation of engineering drawings, specifications, and other technical documents. Communicates and transfers engineering data to aid field staff and craft. Communicates and transfers field issues to engineering group to improve engineering deliverables for efficient fabrication, erection, installation and testing of pressure vessels, storage tanks, piping and equipment. Participates in constructability and model reviews. Documents and assists in the resolution of technical issues that arise at the jobsite. Supports construction with RFI's from the Field to Engineering and assists in maintaining the RFI log. Observes the work being performed and coordinates with Engineering to address any deviations from the drawings and specifications. Assists the material receipt personnel by performing receipt inspections including coordination of non-conformance resolution with the cognizant Engineers and Procurement for incoming engineered equipment and components. Facilitates Engineering's review of rigging plans. Supports with pre-commissioning and commissioning activities. Supports in conducting and documenting facility performance tests when within the project scope. Supports the construction superintendent regarding construction planning requiring engineering interface. Coordinates site visit timing and requirements for engineering discipline EORs observations and sign-off. Works on special projects as assigned and directed by supervisor, the project engineer, or by the construction team. Travels to meetings with customers and vendors as required. Performs other responsibilities as required or assigned. Qualifications Bachelor's degree in Mechanical, Chemical, Civil/Structural, Electrical or other related discipline required. Entry-level Engineer; no experience required but field experience on construction project sites highly preferred. Strong communication skills, both written and oral, and good organizational skills. Ability to perform with minimal supervision. Ability to work on multiple activities at one time. Strong computer skills, including PowerPoint, Excel, and Word are required. Travel Requirements - assignments will be field positions at construction sites throughout North America with periodic stints in an office including a potential initial office assignment to learn the Matrix way. Physical Demands - Light physical effort required to sit or stand, reach, bend, and move about facility (including ladders and stairs). Follow us at Matrix PDM Engineering and Matrix Service Company to view all of our open positions and for the latest news about our operating companies and our teams. Full-time employees are offered a comprehensive benefits package, including medical, dental and vision plans covering eligible employees and dependents, disability benefits, life and AD&D insurance, an employee assistance program (EAP), a 401(k) plan with company match, an employee stock purchase plan (ESPP), a robust wellness program and adoption assistance. At Matrix, we are dedicated to building a diverse, inclusive, and authentic workplace. We encourage all whose experience aligns with the listed qualifications to apply and explore joining our organization. EEO/M/F/Disability/Vets Employer We are an Equal Opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, genetic information, marital status, disability, veteran status, or other legally protected characteristic or category. Applicants must be currently authorized to work in the United States on a full-time basis.

Job Type: Full Time / Permanent Work Authorization: No C2C or Sponsorship The A.C.Coy Company has an immediate opening for an Field Engineer. This position will be responsible for providing technical support by developing engineered solutions to meet operational, maintenance, regulatory and other requirements. Responsibilities Responsible for creating and maintaining electrical specifications Provide field engineering support for operations and maintenance of all midstream assets Perform engineering and hydraulic modeling calculations to optimize facility and pipeline performance, gain efficiencies, reduce downtime and lower operating costs Assist with system planning and production forecasting to ensure adequate infrastructure exists for anticipated throughput Oversee modifications/upgrades, as required Support the development and review of engineering and operating standards, procedures and design tools Review and approve an array of project design documents including equipment specification sheets, process flow diagrams, piping and instrumentation diagrams, plot plans and equipment layouts Serve as a technical resource on complex engineering problems Participate in incident investigations to determine root causes, develop process improvements and incorporate changes Contribute to P&ID and PFD design reviews, management of change, pre-startup safety reviews, air quality permit requirements, PSM and Mechanical Integrity program development and OSHA required audits Determine serviceability of midstream assets based on NDE findings to ensure safe and reliable operation Maintain/update process safety information for all midstream facilities Research, review and implement new technology Oversee small-scale facility upgrades from a project management/engineering perspective Commission new equipment/pipelines - including lock-out tag-out planning and implementation, depressurization of systems, purge and pack equipment, return to service, etc. Develop strategies to lower methane intensity and lower emissions Qualifications Education: B.S. in Civil, Mechanical, Industrial, Chemical, Petroleum Engineering or equivalent field/technical experience required Minimum Requirements: 3-5 years experience Ability to interpret engineering schematics, drawings and technical manuals Knowledge of compression, dehydration, condensate stabilization, gas measurement and liquid measurement Equally effective working independently or in a team environment Strong planning, organizing and project management skills May require travel and short-term assignment to other operating areas Preferred Qualifications: Field midstream operations experience Experience with ProMax, Ariel Compressor, AutoCAD, Piper Familiarity with DOT pipeline requirements, Process Safety Management and Mechanical Integrity

To us, CoServe means that “we're in it together” with our business partners. Your priorities are our priorities, and we are vested in your success. This core perspective drives everything we do. We've found that working together is what creates long-term value and profitability. Our mission is to serve you first, and in serving you, we win together. Our vision is to help discover the very best talent on the planet. And then help those people find their ideal work opportunity. CoServe's specific focus is IT and Telecommunication. As serving others has always been our M.O., we have built deep, lasting relationships over the last few decades. These relationships are what make the difference in finding the exact right person at exactly the right time. Job Description We are looking for high skill and high character Site Supervisors to lead a Cisco 2900 deployment in an enterprise environment around the NE. You will be overseeing the installation of the 2900 routers and Aruba access points. Your role will be to lead a team of two installers, coordinate with the end client, direct logistics, and oversee the entire deployment process. The work will consist of 1-2 nights in each job site, and then moving on to the next one. This will be night work when the job site is closed for business. Strong Cisco experience required. We are looking for self-starters, people who get the job done. The project will last for approximately one year with potential but no guarantee to be extended. Please reply ASAP as this is an urgent request! Qualifications We are looking for Enterprise Cisco ninjas. If you send in your resume it should demonstrate: - Intimate knowledge and experience with the Cisco 2900 series - Tons of installation experience, particularly working in a retail environment - Top notch leadership skills - Logistics savvy - Superb customer service skills - Quick thinking and problem solving abilities If you can show me all this in your resume then we'll have a job for you! Additional Information This is an opportunity we are looking to hire for ASAP! Please send in your resume immediately if you are interested.

Summary: Responsible for safe, and effective operation of industry specific equipment with the primary purpose of performing inspections of sanitary sewer and storm water collection systems. As a contracted employee of JARBO Employment Group we expect you to have a positive attitude, to lead by example, demonstrate sound decision-making skills, encourage great team work, inspire those around you, and demonstrate a good stress tolerance. We want to see you embrace and immerse yourself in our client's culture. Primary Responsibilities: Perform engineering field inspections including, but not limited to: manhole inspections, smoke testing, flow monitoring, GPS locates, and water dye testing. Install flow monitoring systems within sewer manholes. Inspect manholes manually or with telemonitoring equipment Operate and maintain instruments and equipment. Accurately document inspections in a timely manner with detailed field notes. Obtain and maintain all required safety training and certifications which could include, but are not limited to: OSHA 10 Hour, confined space, CPR/First Aid, defensive driving, and spotter's training. Adhere to all the safety requirements of the position while assisting team members to do the same. All other duties as assigned.

Remote with Travel opportunity + comprehensive relocation assistance provided to the qualified candidate! Our award-winning client is seeking a Project Engineer to join their team. Provide comprehensive field service, remote phone support, and system build assistance for the company, ensuring professional representation, timely documentation, and proactive problem resolution while maintaining high customer satisfaction. Responsibilities: Perform field service, remote phone support and system build support, meeting position requirements. Complete required documentation promptly and accurately, maintaining organized records. Act as the primary on-site representative of the company, presenting a professional and well-organized image to customers. Conduct site surveys, installations, maintenance, and repairs on vision inspection systems, outlining site and equipment requirements. Understand customer goals, identify the consequences of solutions, and develop installation and escalation plans. Configure system hardware, software, and network components, ensuring proper assembly and integration. Utilize proactive monitoring procedures to identify opportunities for problem prevention. Provide customers with overviews of installation activities, site-specific information, and access to appropriate contacts. Conduct customer training, presenting information clearly and persuasively. Maintain high customer satisfaction by understanding and meeting customer needs. Handle customer relations problems promptly and appropriately, escalating issues as needed. Provide support to 24/7 service plan customers, ensuring availability as required. Communicate objectives and results related to installations and inspection issues. Provide feedback to the organization regarding competitive systems. Conduct application support when appropriate, optimizing inspection systems for customers. Required Qualifications: Associate's degree and technical courses or equivalent experience. Experience in the automation field with a preference for machine vision equipment. 2 years of independent field installations and troubleshooting experience. Knowledge and experience in manufacturing automation components and programmable devices. 80% travel availability. What You Can Expect from Us: Opportunity to work for a fast-growing technology and market leader. Extensive opportunities for continuous learning and development. Independent work in committed international teams. Regular exposure to new challenges and opportunities for learning. A culture known for respectful interaction, ethical behavior, and integrity. A rewarding and forward-thinking company culture with excellent company benefits. Comprehensive benefits package, including competitive compensation and medical coverage.

TFA Staffing Co.is a full service professional staffing agency.We specialize in the High Technology profession with talent in many different areas. A faster pace - The average professional at TFA Staffing completes 8 to 12 engagements in a year across numerous areas of practice and client industries. Large Enterprise Clients: Our consultants work on critical projects for some of the world's largest companies. We have a diverse set of clients with an emphasis in Professional and Executive Level, Financial Services, Information Technology, Health Care, Sales, Engineering, Industrial and Skilled Labor. We offer candidates complete confidentiality in their search and provide employers with simple, targeted searches from a database of qualified candidates through partnerships with afilliate companies. Job Description We need a telecommunication engineer with MESH Protocol experience. Company is looking for a Telecommunication Engineer. Will propose, design, test and commission communication systems that include various technologies in the fields of radio frequency transmission and propagation. Primary focus will be on MESH and MIMO technologies which require a solid foundation for network design including multicast and spanning tree protocols. This position's work assignments are not strictly in 802.11 RF design. Will conduct RF site surveys, license of ultra-high frequencies, design of UHF RF systems involving billing data analyzers, repeaters, voters, fibre to RF converters, etc. Will also design, test and commission areas such as networks, voice over IP telephones, Public Address audio, LED/LCD signs, and close circuit television. * Design and commission stand-alone RF systems for projects worldwide; * Design communication systems using off the shelf components based on customer requirements. This includes all aspects of the design of communications subsystems, including the work of other engineers and technologists; * Oversee technical deliverables to ensure that schedules and quality of work are maintained. This includes installation design, software configuration management, RAMS, maintenance procedures and instructions, safety and quality plans and procedures; * Prepare test procedures and support product introduction to demonstrate compliance of installed communications systems; * Prepare estimates to complete work tasks; * Monitor engineering progress according to budgets throughout projects duration; * Ensure that project staff addresses proper physical interface with the civil and electrical works through specification of requirements and proper follow with quality assurance and the civil and electrical contractors to make sure installation provisions are built correctly. Qualifications 1. Bachelor's Degree in Electrical Engineering or Computer Science. 2. 1 to 2 + years of experience as a Telecommunication Engineer. 3. Experience with MESH Protocol. 4. Proficiency with English (written and spoken). Additional Information Please send cover letter and resume in word doc format ASAP to ~ [email protected] (P) ************

The Student Conservation Association, in partnership with the Pennsylvania Department of Conservation and Natural Resources (DCNR), Office of Vocational Rehabilitation (OVR), and CorpsTHAT, is seeking high school-aged students to join the Pennsylvania Outdoor Corps. The Pennsylvania Outdoor Corps offers paid work experience, hands-on skill development, and educational opportunities. Crew members will join a team of peers to complete conservation and infrastructure projects on Pennsylvania's public lands. Throughout the season, members will also participate in education and training activities related to resource management, environmental education, and recreation. POSITION DETAILS Location: Pittsburgh, PA - Western PA School for the Deaf (WPSD) Position Dates Leader Position: 6/10/26 - 8/11/26 Total paid days: 45 days (9 weeks) Mandatory Leader Training: 6/10/26 - 6/23/26 (Virtual and In-Person sessions) Virtual Sessions (Zoom): 6/10/26 - 6/11/26; 6/23/26 In-Person Conservation Work Skills: 6/14 /26 - 6/21/26 Location - Training site: Laurelville Retreat Center, Mt. Pleasant, PA Fully paid training with transportation, lodging, and all meals provided. Travel and overnight, on-site stay required at training site full-time from 6/14/26 - 6/21/26. Training details will be shared in advance. Leader Prep Week: 6/24/26 - 6/25/26 Members in the Field: 6/30/26 - 8/7/26 Leader Season Debrief: 8/10/26 - 8/11/26 Travel and an overnight stay are required. Group lodging and meals provided. Weekly Schedule Monday - Friday; 7:30 am - 3:30 pm Crew will have the option to engage in recreational weekend enrichment activites with local Deaf educators and leaders. Compensation $19.38/hr (approx. $775/week pre-tax) paid biweekly. *All allowances are subject to applicable federal, state, and local taxes. Hours - 40 hr/week *In the event of rare inclement and/or other severe weather, the crew may be called off for an unpaid day or day/s to ensure the safety of all participants until the threat passes; therefore, due to the nature of the work, 40 hours is not guaranteed. Required Qualifications Must be Deaf or hard of hearing Must be proficient in American Sign Language (ASL) Age 21+ before the start of the position Must have housing in or near the program city and reliable transportation. Must have a current driver's License with a minimum of 3 years driving experience, and be able to pass SCA Motor Vehicle Record (MVR) check Must be available for the full duration of the program Must have experience working with youth or in outdoor settings Must have current CPR/First Aid certification Must obtain and provide required clearances for working with minors in PA: Pennsylvania Child Abuse History Clearance Pennsylvania State Police Criminal History Clearance Federal Bureau of Investigation (FBI) Criminal History Clearance Must successfully complete SCA Leader Training Must have the ability to model safe and professional behavior at all times Ability to perform manual, physical labor for up to 8 hours per day, exposed to the elements in outdoor settings Living Accommodations and Transportation Residential Crew Model - crew lodging provided by WPSD for full program session. Crew will remain on-site, overnight supervision and local staff support, and access to essential amenities. All meals provided by program. Crew vehicles are provided for daily team travel between the crew's centralized meeting location and all worksites. Leaders are responsible securing own transportation to Pittsburgh for program start and departure home at the close of the program. Key Duties and Responsibilities Act as a Crew Supervisor by facilitating teamwork, managing field-based tasks, ensuring and maintaining SCA safety standards, teaching and monitoring project tasks, proper tool use, and body mechanics Serve as a Role Model by cultivating a safe and respectful workplace environment, modeling professional behavior and work ethics, encouraging personal development, facilitating team building, guiding crew dynamics and morale, and facilitating conflict resolution Act as a Project Manager by communicating with agency park partners, ensuring the successful and timely completion of work projects, and upholding a positive representation of SCA. Perform tasks as a Program Administrator by organizing logistics, completing documentation, managing a budget, and communicating with SCA staff and Partners Marginal Duties (Leaders) Work collaboratively with co-leader on a small team Co-live respectfully with small team Fully supervise crew members and participate in project work, environmental education sessions, and enrichment activities Maintain professional communication channels with participants, parents/guardians, and staff JOB FUNCTIONS Projects May Include Trail maintenance and construction, including implementing water management techniques, brushing, blazing, and rerouting, Habitat Restoration, including invasive species identification and treatments, tree Planting, and installing Riparian Buffers Facility maintenance projects, including painting, staining, and basic carpentry Construction projects such as bridges, stairs, picnic tables, and pavilions Fencing and Boundary Line Maintenance Working Conditions Work schedules and projects may change on short notice or be ambiguous. Work settings require the ability to interact with people of varying cultures and perspectives positively. Inclement and severe weather conditions, including heavy rain and flash flooding, gusty and strong winds, foggy or decreased visibility, and lightning events. Decreased or inclement air quality conditions due to wildfire smoke or smog. Warm temperatures and adverse heat conditions could include temperatures in some regions up to 110°F or hotter. Exposure to natural and environmental hazards such as poison ivy, oak, or sumac, tick and mosquito-borne illness, snakes, and potential for other wildlife encounters. General Physical Requirements Able to understand, adhere to, and communicate with others regarding hazards, procedures, and safety policies. Able to stay alert and engaged for extended periods of program time. Able to independently manage known medical conditions with the resources available throughout the position or program. Able to wear all required personal protective equipment, including internal or external safety glasses, hard hats, gloves, N95 or other approved face masks or shields, chaps, and appropriate footwear. Able to refrain from behaviors and actions that disrupt the work and safety of others. Able to cooperate with others to complete daily group tasks, responsibilities, and project work under potentially difficult conditions, variable daily routines, and limited personal time. Able to self-regulate or co-regulate emotions and actions when distressed or uncomfortable, with or without the support of others. Able to self-manage outdoor and environmental exposure (e.g., temperature, wind, sun, etc.) in a variety of weather conditions. Equal Opportunity Statement SCA strives to cultivate a work environment that encourages fairness, teamwork, and respect among all staff members. SCA is committed to maintaining a work atmosphere in which people of diverse backgrounds and lifestyles may grow personally and professionally. The Student Conservation Association, Inc. is an equal opportunity employer.

APTIM is pleased to announce an immediate opening for a Project Engineer in our Solid Waste Engineering Group to support our exciting portfolio of projects. This opening is remote or in our California (Concord), Texas (Dallas), Florida (Tampa or Winter Garden), Ohio (Findlay), or Pennsylvania (Pittsburgh) or St. Louis, MO. Our Solid Waste Engineering Group provides the following services to both the public and private sectors: Facility design and permitting Stormwater modeling and management plan development Construction oversight Operations and maintenance Hydrogeologic and geotechnical investigations Environmental compliance audits Our philosophy centers on developing and maintaining a culture of mutual respect and honesty, where people listen generously and speak straight. At APTIM, you can expect countless opportunities to learn, develop business and leadership skills, and engage on a multitude of projects. Key Responsibilities/Accountabilities: Conduct field inspections and construction quality assurance (CQA) oversight Preparing site plans, grading and drainage plans, pump and piping plans, and conceptual layouts for civil earthworks, landfill grading and construction projects Preparing engineering calculations and supporting analyses Perform groundwater, leachate, stormwater and landfill gas sampling and testing Preparing and completing regulatory compliance reports, work plans, and special studies Preparing regulatory compliance reports, work plans, and special studies Utilizing skills and knowledge to solve complex problems Collaborating with other team members Coordinating with contractors and clients Physical work the ability to lift 50 pounds will be required Possess a "Safety First" work ethic Providing other duties as required Basic Qualifications: BS/MS Civil, Environmental, or Mechanical Engineering or equivalent sciences. Possession Engineer in Training (EIT) certification Minimum of 6 years Ability to work on multidisciplinary projects Excellent oral and written communication skills Ability to work in a team environment Self-starter and problem solver Excellent organizational skills Ability to wear proper PPE for work on hazardous waste sites Desired Qualification: Professional Engineer (PE) License Landfill / Solid Waste experience Possession of 40-hour OSHA HAZWOPER training with current 8-hour refresher certificate Knowledge of AutoCAD, HEC-RAS, and ArcGIS software Knowledge of landfill operations and solid waste projects Knowledge of federal and state environmental regulations ABOUT APTIM APTIM is committed to accelerating the transition toward a clean and efficient energy economy, building a sustainable future for our communities and natural world, and creating a more inclusive and equitable environment that celebrates the diversity of our communities. We specialize in environmental, resilience, and sustainability and energy solutions, as well as technical and data solutions, program management, and critical infrastructure. For every challenge our clients face, there is an opportunity for APTIM to innovate a fit-for-purpose solution that will raise your organization or community to a new standard of excellence. What you can expect from APTIM: Work that is worthy of your time and talent Respect and flexibility to live a full life at work and at home Dogged determination to deliver for our clients and communities A voice in making our company better Investment into your personal and professional development As of the date of this posting, a good faith estimate of the current pay range for this position is $80,000 to $130,000 annually. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM. Employee Benefits Aptim Environmental & Infrastructure, LLC, an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace ************************************ Medical, vision, and dental insurance: Through the marketplace, our employees can choose benefits from five metallic levels and 10+ carriers to find the right benefits that work for them in their location. Life insurance Short-term and long-term disability insurance 401(k) APTIM offers three 401k plans through the Aon Pooled Employer Plan (PEP). The specific plan you are eligible for depends on the business unit you are in. The details of the largest plan are found here: APTIM 2025 401(k) Plan Features (makeityoursource.com) APTIM - Helpful Documents APTIM 2025 401(k) Plan Features Paid holidays, vacation, and sick leave (eligibility based on company policy and applicable law) Watch our video: About APTIM - In Pursuit of Better #LI-ONSITE

Nutrien is a leading provider of crop inputs and services, and our business results make a positive impact on the world. Our purpose, Feeding the Future, is the reason we come to work each day. We're guided by our culture of care and our core values: safety, inclusion, integrity, and results. When we say we care, we mean it. We're creating an inclusive workplace where everyone feels safe, has a sense of belonging, trusts one another, and acts with integrity. Nutrien Ag Solutions is the retail division of Nutrien, providing full-acre solutions through our network of trusted crop consultants at more than 2,000 locations in North America, South America, and Australia. For more than 150 years, we have been helping growers achieve the highest yields with the most sustainable solutions possible, offering a wide selection of products, including our proprietary brands: Loveland Products, Inc.; ProvenSeed and Dyna-GroSeed; as well as financial, custom application and precision ag services. Through the collective expertise of our nearly 26,000 employees, we operate a world-class network of production, distribution, and ag retail facilities We efficiently serve growers' needs and strive to provide a more profitable, sustainable, and secure future for all stakeholders. Help us raise the expectation of what an agriculture company can be and grow your career with Nutrien and Nutrien Ag Solutions. What You'll Do:

About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit eose.com. About the Role The Project Engineer will be responsible for performing technical work to deliver Battery Energy Storage Systems (ESS). Project Engineer will work with cross-functional teams to ensure technical requirements for clients BESS (Battery Energy Storage) projects are fulfilled to company and customer expectations. This is a customer facing position, to create utility scale battery storage systems throughout the United States and the rest of the world. Accountable For: Executing the project engineering efforts in developing and designing battery energy storage systems (BESS) as well as their power electronics and controls. The tasks include maintaining existing projects and supporting the creation of automated test equipment for project deployments. Responsibilities Develop, coordinate, review, and maintain technical oversight of engineering and design of contracted energy storage projects. Design and review the BESS, including power conversion systems (Inverters & DC/DC Converters), isolation and power transformers, medium voltage switchgear, protection and control systems, grounding, low and medium voltage ac and dc cable systems, and plant auxiliary equipment. Work closely with Project Managers, Engineers, Customers, AHJs, and others to meet the contractual commitments. Act as a technical consultant for other Eos units and for more junior PEs. Develop specifications, drawings and controls and protections strategies for contracted projects. Participate in continuous improvement of standard processes, procedures, documentation, and tools to effectively deliver a wide range of project solutions. Ensure all project engineering deliverables for assigned projects are on schedule / on budget and communicate project status to internal and external audiences via standardized project controls systems. Work with other engineers pre- and post-contract award to optimize customer BESS solutions, use case reviews and commercial proposal strategies and processes. Maintain project documentation and assist in creating vendor technical specifications and user instructions for optimal use of the designed BESS. Provide support to Field Service Technicians when troubleshooting in field commissioning and service operations. Understand and utilize technical standards for reviews, documentation, and designs such as UL, UN, IEC, ISO, ECE and other engineering standards. Collaborate with Product Engineering to define, refine and improve BESS systems. Other duties, responsibilities and activities may change or be assigned at any time with or without notice, in the spirit of an agile design group within an active technology company Knowledge, Skills, and Abilities Ability to work independently and on-site and understand how components fit into a larger system Working knowledge of embedded control systems and their applications General knowledge of CAD and the ability to interpret mechanical and electrical engineering drawings. Strong troubleshooting skills for diagnosis and design improvement Familiarity with design for ground fault and EMC and availability to trace down GFI and EMI issues Awareness of safety certification process to standards such as UL Competent skills with communications protocols such as TCP/IP, CAN, i²C and SPI; use of Modbus Capability to select and integrate off-the-shelf component and equipment Strong cross-discipline system skills Understanding of hardware and physical system being controlled is required Comfort and experience with the hazard and safety protocols of high voltage equipment and other aspects of working with large-scale battery systems Ability to self-direct to a goal and achieve independent success A team-player attitude and strong written/verbal communication skills are a must Education and Experience BS in Electrical Engineering, Computer Science, Computer Engineering (MS degree preferred) or related field, and a minimum of 2+ years of experience in all aspects of engineering development and product delivery. Hardware and system design and troubleshooting. Minimum 2 years' experience designed electronics and developing automated controls Engineering Design Software experience Linux, embedded systems High voltage electrical systems Travel Overnight/North America: Less than 10% Working Conditions Office Environment - Must be able to remain in a stationary position 50% of the time and occasionally move about inside the office to access file cabinets, office machinery, etc. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. May be required to exert up to 25 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body. Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body. Customer/Partner Locations - Employee may visit customer or partner locations that may be comprised of office, manufacturing floor, laboratory environments and construction sites depending on the location and reason for visit.

Why This Role Is Critical As the need for nuclear energy grows, the future couldn't be brighter. Join our vital mission to create lasting solutions for our planet's greatest challenges. In this role, you are ready to shape the future of clean energy and make a long-lasting global impact. With us, anticipate engaging and challenging projects that deliver innovative solutions and value-added technologies helping power more than 38 million North American homes. What You'll Do Day-To-Day Supporting the design and development of engineering solutions. Conducting analysis and evaluations of systems and components. Assisting in testing procedures and interpreting results. Helping prepare technical specifications and documentation. With guidance, begin to independently evaluate and apply various engineering techniques and procedures. Use sound judgment to assist in adapting and modifying standard methods to address new or unfamiliar tasks. Learn to select appropriate tools and criteria for solving technical problems, especially those that require creative or non-routine approaches. What You'll Bring Pursuing a BS (Junior/Senior), MS, or PhD in Mechanical or Electrical Engineering. Please attach a copy of your unofficial academic transcript as part of your application. Strong technical problem-solving skills. Clear communication, and a passion for innovation in clean, safe energy. Basic knowledge of electrical circuitry and functionality. Excellent problem identification and problem resolution skills. CAD or 3D modeling experience. Total Rewards Package Salary: $24.10-$31.50 hourly, with the opportunity to receive performance bonuses. Additional Benefits: Additionally you may be eligible for 401k plan participation, Business Travel Insurance, Employee Assistance Program, and company paid holidays. About Framatome Framatome has been shaping the future of nuclear energy in the U.S. for more than 60 years. Framatome Inc. is headquartered in Lynchburg, Virginia, with more than 2,400+ employees across North America supporting nearly every nuclear plant in the nation. From our facilities in Virginia, Washington, North Carolina, Pennsylvania, Massachusetts and beyond, we deliver outage services, advanced nuclear fuel technologies, and next-gen reactor innovations that keep the lights on. At Framatome, you will join a global team committed to creating reliable, carbon-free energy. Here, you can: Solve complex nuclear challenges that directly impact the climate. Build your career through technical fellowships, leadership roles, and global opportunities. Do your best work in a culture that values safety, innovation, and well-being. Framatome is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Offers are contingent on background check and drug screen (where applicable). Positions may involve access to information subject to U.S. export control regulations; applicants must meet eligibility requirements (see DOE 810 Appendix A).

Job DescriptionCLIENT HIGHLIGHTThe client you'll be supporting is a Fortune 500 global leader in energy technology, focused on helping the world produce cleaner, more reliable power. Their teams design and improve the systems that keep homes, businesses, and communities running, from gas and wind turbines to the electrical grids that connect them. This is a chance to be part of a company that's driving innovation, supporting sustainability, and shaping the future of energy. LOCATION Imperial, Pennsylvania, United States of America, 15126 COMPENSATION $37.50-43 per hour SCHEDULEOnsite - 40 hours per week, 8 hours per day7:00 am to 3:30pm M-F CONTRACT TERM1 year with high likelihood of extension or conversion to full time employee. POSITION OVERVIEW - Manufacturing Electrical Test Engineer IIWe are seeking a dedicated manufacturing testing specialist to join our team. The successful candidate will be responsible for strictly adhering to procedures and protocols for testing of solar inverters, converters, and variable frequency drives including power drive modules, basic drive modules, and medium voltage AC and DC drives. This role involves executing functional testing, developing test labs, and establishing test procedure requirements. Additionally, the manufacturing testing specialist will ensure compliance with the company's quality policy and Environmental Health and Safety (EHS) requirements. RESPONSIBILITIES Promote safety first culture. Drive zero test defect culture. Candidate must possess the ability to independently troubleshoot equipment and identify solutions by applying technical expertise and product knowledge. Perform full functional testing including insulation and Hi-Pot testing, I/O verification, cooling system functionality, and performance testing. Drive daily continuous improvement in productivity and product quality by identifying manufacturing issues, developing cost-effective solutions, and overseeing successful implementation into production. Participate in the development of processes to ensure manufacturability of equipment, product quality, and successful test execution. Develop test plans for inverters and other electrical equipment including identification of required test equipment. Prepare and develop routine test reports utilizing engineering test templates. Develop and communicate the test design requirements to Engineering for to drive improvement. Ensure proper set up and dismantling of equipment by understanding LOTO process per EHS requirements. Provide test documentation for approval by manufacturing and engineering management. Lead customer witness factory acceptance testing. Participate in third party certification testing. Develop reports to capture lessons learned and track first pass yield data and provide to manufacturing and engineering leadership. Align test methods with respective to IEC and UL standards. REQUIRED QUALIFICATIONS/SKILLS Bachelor's degree in electrical engineering or related field from an accredited university or college with a minimum 3+ years of experience in equipment testing. Knowledge of electrical equipment manufacturing and exposure to quality, engineering, lean/5S, testing or engineering processes. Analytical skillset and systematic approach to problem solving. REQUIRED CHARACTERISTICS Customer-focused in product testing and assessing priorities. Knowledge of IEC and UL certifications and requirements. Demonstrated ability to motivate team members to achieve results. Ability to interact positively with cross functional teams. Demonstrated commitment for process improvement. Strong oral and written communication skills. Willingness to work extended hours or modify shift when required. Open to 2nd or 3rd shift assignments.

Job Description Sargent Electric Company (************************ - Consistently named one of the Top Fastest Growing Companies. Also, Awarded Safety recognition by Specialty Trades Insurance Company for the large company bracket and The Association of Union Constructors ! Established in 1907, Sargent Electric Company has since evolved into one of the largest electrical contracting companies in the area, providing comprehensive services to our clients. We are looking for an experienced PROJECT ENGINEER based out of our Pittsburgh, PA office. The primary function of this position is to provide the overall technical oversight of engineering scopes for EPC or Design-Build projects with challenging schedule milestones. This role helps our customers define and hone solutions for their projects to provide winning solutions for our customers and for Sargent. Helping our customers optimize their projects through creative, value engineering solutions and working around supply chain obstacles is a key part of the role. The projects may include small, fast track projects or major projects up to $100MM. This position may also be involved in troubleshooting electrical projects or providing commissioning support for the Owner. The position will work with multiple business units and project managers on assigned projects and may oversee multiple projects in various stages of development. The position requires periodic travel to job sites nationwide and periodic short term on-site assignments. RESPONSIBILITIES: Providing engineering solutions that support our customers' technology solutions and provide cost effective, constructable designs. Delivers designs that support safe delivery of our projects and safe solutions for our customers when energized. Responsible for implementing and executing the overall direction, coordination, and evaluation of our engineering activities and solutions in coordination with the Project Management and Field Management Team Assure that our subcontractors provide quality project teams and the appropriate, experienced talent to provide a safe, high quality design. Establish project objectives and performance standards as defined by the Company's operating policies and procedures and the project turnover process. Support the project proposal effort and support the estimating needs where required. Often the engineering manager will be an integral part of the proposal process identifying the critical equipment, materials specifications and technical solutions to meet our customers' requirements. Support sales efforts through meetings with our customers, site visits, vendor shops, and other operating units to determine best solutions for our new projects. Assists in defining engineering requirements, selecting engineering companies based on company qualifications and experience, resource availability, workload / backlog, project understanding, cost, and references. Have a complete understanding of all plans, contract, and specification requirements to ensure the Company's interests are always protected, specific contractual obligations are adhered to and all work is completed accordingly. Participate in the development of all project schedules, budgets and other project related reports. Ensure their accuracy and that any required updates are done in a timely manner. Support the procurement processes of EPC projects by working directly with our engineers and vendors to establish the most economical solutions, and maintain schedules while urgently addressing all critical path items Maintain a strong working relationship with the client, owner, engineer, vendors, suppliers and other project related firms and personnel to minimize conflicts and maximize the outcomes of all project activities. Support the Company's strategic planning initiatives and follow through with any assigned responsibilities to ensure success. Seek out and participate in self-improvement, leadership development skill programs to further enhance individual effectiveness, achievements and outcomes. Play a key role in promoting the importance of client satisfaction and its relationship to the Company's reputation and its ability to obtain new and repeat business. SKILLS: Excellent written communication skills. Proficient with computers, particularly Microsoft Office applications, including the ability to type. Strong interpersonal and communication skills and the ability to effectively communicate with a wide range of diverse individuals. Works efficiently under tight time frames, responds to requests in a timely manner, and communicates effectively as a team player. Understands the importance of being able to multi-task. -------------------------------------------------------- BASIC QUALIFICATIONS: A four-year electrical engineering degree or construction management degree or equivalent is preferred. 5-8 years of related experience may be substituted. (EIT or PE preferred) Ability to not only comprehend but also to provide input on single-line diagrams, wiring diagrams, schematics, protection & control, fuse coordination, and outage planning, general arrangements, elevation drawings, bus designs/calculations, and below grade/raceway design. A demonstrated knowledge of studies including but not limited to lightning, lighting, grounding, insulation coordination, short circuit, load flow, arc flash, protection coordination, and relay settings. A demonstrated knowledge of complex multi-discipline packages and coordinating multi-discipline packages - civil, foundations, structural steel, pre- engineered buildings, HVAC, mechanical and piping, insulation, electrical, instrumentation, telecommunications, life safety systems and other specialty systems. Experience in the energy projects including utility and power design ranging from low voltage to extra high voltage (LV,MV,HV,EHV), AC design, DC design, transmission/distribution/collection, renewable energy, solar, battery storage, wind and natural gas projects is a strong plus. Sargent Electric Company and all its affiliate companies are committed to providing equal employment opportunities in all aspects of employment to qualified individuals without regard to the following criteria: race, color, national origin, religion, sex, pregnancy, sexual orientation, gender identity or expression, mental or physical disability, age, familial or marital status, ancestry, military status, veteran status or genetic information as well as any other prohibited criteria under any local, state or federal law applicable to Sargent Electric Company. Powered by JazzHR hZiF6Mbis8

Brayman Construction Corporation is seeking a qualified Project Engineer to join our team for the $769.9 million Montgomery Locks and Dam project, awarded by the U.S. Army Corps of Engineers in Monaca, PA. This major initiative involves removal of the existing lock chamber and constructing a new 110-ft by 600-ft primary lock chamber at the Montgomery Locks and Dam on the Ohio River in Monaca, PA. The work will begin with in-the-wet construction for portions of the lock wall monoliths, followed by cofferdam installation and dry construction of the remaining monoliths. Deconstruction of the existing auxiliary lock chamber will start in Spring 2025, with project completion anticipated in 2030. This vital infrastructure project is part of the larger Upper Ohio Navigation Project, designed to upgrade aging lock systems and ensure safe, efficient navigation along the Ohio River. Join us and contribute to a project that will impact regional commerce and enhance navigation on the Ohio River for decades to come! This position earns a competitive salary and excellent benefits, including low-cost medical/dental/vision insurance, 401(k) with company match, generous profit sharing and performance bonuses, paid time off, and paid holidays. JOB SUMMARY The Project Engineer will be responsible for assisting the Project Manager and Superintendent in overseeing geotechnical construction projects, which would include contract management, change order preparation, project schedule updating, vendor/supplier management, quantity tracking, production analysis, progress billing quantities/construction units for invoice preparation, resource allocation and coordination, estimating, and material pricing/project buyout. SUMMARY OF PROJECT ENGINEER RESPONSIBILITIES Manage project takeoffs and documentation Prepare project proposals Obtain quotes from suppliers Develop strong relationships with: customers, vendors, subcontractors, quality control personnel, operations, and management staff Use exceptional organizational skills for effective project management Leverage interpersonal and communication skills for successful task completion REQUIRED SKILLS AND ABILITIES 3-5 years of Project Engineering experience Ability to read and interpret blueprints and plans Strong analytical and problem-solving skills Proficient with Microsoft Office Suite or related software (particularly Excel) Excellent organizational skills and attention to detail Excellent time management skills with a proven ability to meet deadlines Ability to be flexible and quickly adapt to new challenges Must be willing and able to travel or relocate as necessary for projects REQUIRED EDUCATION AND EXPERIENCE Bachelor's Degree in a related field, which may include Civil Engineering, Construction Management, or Business Management or the equivalent experience in the construction industry. Completion of at least one internship with a heavy civil, foundation, or steel erection contractor or equivalent work experience. Experience with various types of heavy civil or foundation work including, but not limited to, mass concrete, post-tensioning, dams, drilling, soil nails, caissons, tie backs, shotcrete, slurry walls is preferred. For a complete and list of responsibilities, please visit our career page at ************************************** ABOUT BRAYMAN We are a leading heavy civil and geotechnical contractor with office headquarters in suburban Pittsburgh, Pennsylvania. Incorporated in 1947 as a family-owned business, Brayman has grown, diversified and evolved its construction services from a small bridge and concrete company to a large, nationally recognized provider of complex, heavy civil and geotechnical construction projects servicing both public and private sector clients. SAFETY SENSITIVE POSITION This is a Safety Sensitive Position requiring work on project sites, including federal projects. This position may require working at heights, in confined spaces, around heavy equipment, around high voltage, and under constantly changing circumstances. This position will be subject to more stringent drug testing and compliance policies associated with our status as a federal contractor. SPECIAL NOTE This is presented as guidance only. Other reasonable tasks or responsibilities as management sees necessary may be added to this job description in order to achieve satisfactory job performance by the team member. EEO STATEMENT Brayman and Affiliate Companies are Equal Opportunity Employers. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, veteran status, or on any other characteristic protected by law. CONFIDENTIALITY Some positions with the company will have access to confidential and proprietary information. Successful candidates for those positions will be required to sign our standard confidentiality agreement as a condition of employment. Location: 15061 Job Posted by ApplicantPro

Job Description Work For Us Are you ready to join a dynamic team, focused on Safety, Wellness, and Service? Do you aspire to be part of an innovative design team? Cultivate your career by joining Triad Engineering, Inc.'s team as a Staff Engineer in our civil engineering department. While each day may include a wide array of responsibilities, your focus on and dedication to quality will ensure success. We are committed to investing in our team members as we all focus on the continued success of the company-funded employee stock ownership plan (ESOP). Excellent compensation and benefits package including: Medical, dental, vision insurance 401(k) plan Paid holidays Paid Time Off Life, Short- and Long-term disability insurance with company-paid premiums Employee Stock Ownership Plan (ESOP) Employee Assistance Program Wellness Program Company supported Professional Development Career Advancement What You'll Do We are seeking a motivated Entry-Level Civil Engineer to join our Land Development team. This role is ideal for recent graduates or early-career engineers who want hands-on experience in site design, stormwater management, utility layout, permitting, and construction support. You will work closely with senior engineers and project managers to develop practical design skills and contribute to projects from concept through construction. Exposure to a wide variety of responsibilities may include but not be limited to: Assist with the design of site layouts, grading plans, roadway alignments, and utility systems Perform engineering calculations, including hydrology, hydraulics, stormwater modeling, and erosion & sediment control Prepare technical drawings, reports, and permitting documents Conduct site visits, field investigations, and construction observation as needed Collaborate with project teams, clients, regulatory agencies, and other stakeholders Ensure designs comply with Pennsylvania state and local regulations, including PA DEP and municipal ordinances Desired Qualifications Bachelor's Degree in Civil Engineering or Engineering Technology EIT candidates are preferred, active EIT a plus 0-3 years of work-related experience Experience with AutoCAD Civil 3D or similar design software (coursework or internship experience acceptable) Displayed competency with hydraulic modeling software such as HydroCAD, HydraFlow and HEC-RAS Familiarity with land development concepts and Pennsylvania regulatory requirements (preferred but not required) Must possess a valid driver's license and have a clean driving record Physical Demands Work is performed both in the office and in the field, which may include all weather conditions, construction sites and/or difficult terrain, and extensive standing and walking. In the field, the employee will regularly lift and/or move up to 50 pounds; frequently lift and/or move up to 60 pounds; occasionally move 80 pounds or more (such as a loaded wheelbarrow of concrete or soil samples). Overall, work may routinely require the employee to sit, stand, walk, climb, balance, bend, stoop, kneel, crouch, and/or crawl. The employee is regularly required to talk and hear and frequently required to use hands to finger, handle or feel; and reach with hands and arms. Must have the ability to see and smell; including close, distance and peripheral vision, depth vision and ability to focus. Reasonable accommodations will be made for persons with disabilities, as defined by the ADA. Triad Engineering Inc. is a Drug-Free Workplace. As a condition of employment, candidates are required to take and pass a pre-employment drug screening. Triad Engineering, Inc. is proud to be an Equal Opportunity Employer

Brayman Construction Corporation is seeking a qualified Project Engineer to join our team for the $769.9 million Montgomery Locks and Dam project, awarded by the U.S. Army Corps of Engineers in Monaca, PA. This major initiative involves removal of the existing lock chamber and constructing a new 110-ft by 600-ft primary lock chamber at the Montgomery Locks and Dam on the Ohio River in Monaca, PA. The work will begin with in-the-wet construction for portions of the lock wall monoliths, followed by cofferdam installation and dry construction of the remaining monoliths. Deconstruction of the existing auxiliary lock chamber will start in Spring 2025, with project completion anticipated in 2030. This vital infrastructure project is part of the larger Upper Ohio Navigation Project, designed to upgrade aging lock systems and ensure safe, efficient navigation along the Ohio River. Join us and contribute to a project that will impact regional commerce and enhance navigation on the Ohio River for decades to come! This position earns a competitive salary and excellent benefits, including low-cost medical/dental/vision insurance, 401(k) with company match, generous profit sharing and performance bonuses, paid time off, and paid holidays. JOB SUMMARY The Project Engineer will be responsible for assisting the Project Manager and Superintendent in overseeing geotechnical construction projects, which would include contract management, change order preparation, project schedule updating, vendor/supplier management, quantity tracking, production analysis, progress billing quantities/construction units for invoice preparation, resource allocation and coordination, estimating, and material pricing/project buyout. SUMMARY OF PROJECT ENGINEER RESPONSIBILITIES * Manage project takeoffs and documentation * Prepare project proposals * Obtain quotes from suppliers * Develop strong relationships with: customers, vendors, subcontractors, quality control personnel, operations, and management staff * Use exceptional organizational skills for effective project management * Leverage interpersonal and communication skills for successful task completion REQUIRED SKILLS AND ABILITIES * 3-5 years of Project Engineering experience * Ability to read and interpret blueprints and plans * Strong analytical and problem-solving skills * Proficient with Microsoft Office Suite or related software (particularly Excel) * Excellent organizational skills and attention to detail * Excellent time management skills with a proven ability to meet deadlines * Ability to be flexible and quickly adapt to new challenges * Must be willing and able to travel or relocate as necessary for projects REQUIRED EDUCATION AND EXPERIENCE * Bachelor's Degree in a related field, which may include Civil Engineering, Construction Management, or Business Management or the equivalent experience in the construction industry. * Completion of at least one internship with a heavy civil, foundation, or steel erection contractor or equivalent work experience. * Experience with various types of heavy civil or foundation work including, but not limited to, mass concrete, post-tensioning, dams, drilling, soil nails, caissons, tie backs, shotcrete, slurry walls is preferred. For a complete and list of responsibilities, please visit our career page at ************************************** ABOUT BRAYMAN We are a leading heavy civil and geotechnical contractor with office headquarters in suburban Pittsburgh, Pennsylvania. Incorporated in 1947 as a family-owned business, Brayman has grown, diversified and evolved its construction services from a small bridge and concrete company to a large, nationally recognized provider of complex, heavy civil and geotechnical construction projects servicing both public and private sector clients. SAFETY SENSITIVE POSITION This is a Safety Sensitive Position requiring work on project sites, including federal projects. This position may require working at heights, in confined spaces, around heavy equipment, around high voltage, and under constantly changing circumstances. This position will be subject to more stringent drug testing and compliance policies associated with our status as a federal contractor. SPECIAL NOTE This is presented as guidance only. Other reasonable tasks or responsibilities as management sees necessary may be added to this job description in order to achieve satisfactory job performance by the team member. EEO STATEMENT Brayman and Affiliate Companies are Equal Opportunity Employers. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, veteran status, or on any other characteristic protected by law. CONFIDENTIALITY Some positions with the company will have access to confidential and proprietary information. Successful candidates for those positions will be required to sign our standard confidentiality agreement as a condition of employment. Location: 15061