Field engineer jobs in Woods Cross, UT

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Aeronautics Systems is looking to add a **Principal or Senior Principal Network and Communications Field Service Engineer** to our team at **RAAF Base Edinburgh** near **Adelaide, Australia** . This position will receive daily tasking and prioritization from their site lead. The selected candidate will be responsible for operations and maintenance support of the MQ-4C Triton network and communications systems at a Forward Operating Base (FOB). **Duties and Responsibilities:** + Provide real time support for flight operations and maintenance, addressing any issues related to communications and networking to include fault isolation, remediation, and resolution. + Perform field integration, troubleshooting, and repair of communications and data link systems in military flight test environment, including operations on a flightline, in a hangar, and in command-and-control centers. + Adherence to checklists and procedures to ensure repeated success and providing redlines to procedures when necessary. + Communicate complex technical issues to local support, the Degrader Action Cell (DAC), Main Operation Bases (MOBs), and Responsible Engineers (REs). + Support and lead air crew engagement for proper techniques in solving complex analysis of technical problems that arise during operations. + Assist with trend analysis as needed for Responsible Engineers (REs). + Perform/support review and analysis of supplier design data and definition of functional test requirements including acceptance, qualification, and system integration. + Take responsibility for the testing, maintenance, and integration of Comms and Networks equipment to include radio terminals, software loads, switches, routers, and firewalls required to support ground and flight test operations. + Work with system admins, maintainers, and onsite personnel to troubleshoot and repair any internal operational issues. ** The selected candidate will be put on a temporary Domestic Assignment and will report to our San Diego, CA site daily prior to international deployment while clearance(s), Visa(s), and other documents are processing. The employee will go through training in San Diego during this period. ** **The expected timeline before deployment is 3-4 months but this will vary.** Initially, this position will work a 9/80 shift. **As the program matures, the shifts may become 12-hour shifts that could include nights, weekends, and/or holidays.** The selected candidate will be required to work full-time, on-site in Australia. This position requires the ability to **travel up to 50%** of the time once in final location. _This position can be filled at either the Principal Field Service Engineer OR Senior Principal Field Service Engineer level, depending upon the qualifications below._ **Basic Qualifications for Principal Field Service Engineer:** + Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 5 years of related engineering experience; OR a Master's degree in a STEM discipline and 3 years of related engineering experience; OR a PhD in a STEM discipline and 1 year of related engineering experience. + Ability to obtain and maintain DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: Security+CE, CCNP, and CISSP. This certificate must be obtained within a reasonable amount of time as determined by the company to meet its business needs. + Competence in Linux, troubleshooting, engineering documents, tools and equipment + Familiarity with comms/networking operations + Ability to support assignment at location (RAAF Base Edinburgh in Australia) for minimum of 18 months + Ability to pass a new hire physical if determined necessary by Company, based on OCONUS location. + **Active** **DoD** **Top Secret** clearance (with a background investigation within the past 6 years or enrolled into Continuous Evaluation). + Ability to obtain and maintain SCI access. + Ability to obtain a CI Polygraph. + Ability to obtain and maintain Special Access Program (SAP) clearance. This SAP must be obtained within a reasonable amount of time as determined by the company to meet its business needs. **Basic Qualifications for Senior Principal Field Service Engineer:** + Bachelor's Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 8 years of related engineering experience; OR a Master's degree in a STEM discipline and 6 years of related engineering experience; OR a PhD in a STEM discipline and 4 years of related engineering experience. + Ability to obtain and maintain DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: Security+CE, CCNP, and CISSP. This certificate must be obtained within a reasonable amount of time as determined by the company to meet its business needs. + Competence in Linux, troubleshooting, engineering documents, tools and equipment + Familiarity with comms/networking operations + Ability to support assignment at location (RAAF Base Edinburgh in Australia) for minimum of 18 months + Ability to pass a new hire physical if determined necessary by Company, based on OCONUS location. + **Active** **DoD** **Top Secret** clearance (with a background investigation within the past 6 years or enrolled into Continuous Evaluation). + Ability to obtain and maintain SCI access. + Ability to obtain a CI Polygraph. + Ability to obtain and maintain Special Access Program (SAP) clearance. This SAP must be obtained within a reasonable amount of time as determined by the company to meet its business needs. **Preferred Qualifications for both levels:** + Active DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: CCNA Security, Security+CE, CCNP, and CISSP + Technical expertise in all areas of network and computer hardware and software interconnection and interfacing, such as routers, firewalls, switches + Experience with test equipment: network analyzers, spectrum analyzers, signal generators + Cisco Certified Network Associate (CCNA) certification + Experience with communication technologies; examples include Internet Protocol (IP) networks, Voice over IP (VoIP), Information Assurance (IA), satellite and Line-of-Sight (LOS) RF communications, control interfaces, and co-site interference + Operations and Maintenance experience at a field site Primary Level Salary Range: $85,600.00 - $128,400.00 Secondary Level Salary Range: $106,800.00 - $160,200.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

WHO WE ARE: Beyondsoft is a leading mid-sized business IT and consulting company that combines modern technologies and proven methodologies to tailor solutions that move your business forward.Our global head office is based in Singapore, and our team is made up of a diversely talented team of experts who thrive on innovation and pushing the bounds of technology to solve our customers' most pressing challenges.When it comes time to deliver, we set our sights on that sweet spot where brilliance, emerging technologies, best practices, and accountability converge. We have a global presence spanning four continents (North America, South America, Europe, and Asia). Our global network of talent and customer-centric engagement model enables us to provide top-quality services on an unprecedented scale. WHAT WE'RE ABOUT: We believe that collaboration, transparency, and accountability are the values that guide our business, our delivery, and our brand. Everyone has something to bring to the table, and we believe in working together with our peers and clients to leverage the best of one another in everything we do. When we proactively collaborate, business decisions become easier, innovation is greater, and outcomes are better. Our ability to achieve our mission and live out our values depends upon a diverse, equitable, and inclusive culture. So, we strive to foster a workplace where people have the respect, support, and voice they deserve, where innovative ideas flourish, and where people can unleash their brilliance. For more information regarding DEI at Beyondsoft, please go to ************************************** ADDITIONAL REQUIREMENT FOR REMOTE POSITIONS: For remote positions, all candidates must complete a video screen with our corporate recruiting team. Responsibilities POSITION SUMMARY: We are looking for an experienced Field Deployment Engineer to join our team to support one of top clients in [LOCATION TBD]. The engineer will directly work with client system engineers, local client logistics teams, and with other Field Deployment engineers remotely. Be responsible for deploying different types of robots to field, including preparation, data entry, data analysis, and post activities. This is a full-time, long term benefited position with competitive compensation WHAT YOU WILL BE DOING: * Conduct regular risk assessments and provide recommendations for mitigating potential hazards * Provide training and guidance to robotics operators, technicians, and other stakeholders on safe operating procedures and best practices * Investigate incidents and near-misses, and develop corrective actions to prevent recurrence * Collaborate with cross-functional teams to integrate safety considerations into robotics design, development, and deployment * Service robotics equipment and ensure any issues are resolved in a timely manner to minimize downtime and maintain operational efficiency. * Provisioning new robotics equipment and repositioning equipment across the data centers as needed. Enforcing tug utilization standards (how many racks = robotics needed) Pre-Deployment Phase * Conduct site-by-site status assessments to ensure readiness for robotics deployment * Develop and implement detailed project schedules by robotic type * Create comprehensive training programs for operators, maintenance personnel, and supervisors * Train operators on safe and efficient operation of new equipment * Train personnel on equipment maintenance requirements and procedures * Train supervisors on equipment operation, maintenance, and troubleshooting * Introduce and deploy maintenance portal at each site with robotics Site Acceptance Testing Phase * Collaborate with cross-functional teams to conduct site acceptance testing * Identify and troubleshoot any issues that arise during testing Post-Deployment/Operationalization Phase * Monitor and analyze key performance indicators (KPIs) such as: * Equipment Utilization Rate * Downtime, Maintenance Costs, Safety Incidents * Throughput (original SAT vs operational in practice), Cycle Time (original SAT vs operational in practice) * Vendor performance/Warranty (tracking of warranty work orders and estimated hours) Qualifications * Bachelor's degree or higher in Computer Science, Computer Engineering, IT, or equivalent combination of education and experience * Experience of Linux command line (at least understands basics) * Basic ability to troubleshoot complex software / hardware configuration problems. * Ability to function effectively in a fast-paced environment and manage continuously changing business needs; excellent time management skills required. PREFERRED QUALIFICATIONS: * Experience of training program is a huge plus * Any customer service skills is good to have * Experience around safety programs is advantage * Background in robotics-related tasks is preferred. * DC/Server room experience is good to have WHAT WE HAVE TO OFFER: Because we know how important our people are to the success of our clients, it's a priority to make sure we stay committed to our employees and making Beyondsoft a great place to work. We take pride in offering competitive compensation and benefits along with a company culture that embodies continuous learning, growth, and training with a dedicated focus on employee satisfaction and work/life balance. * A competitive pay range of $ 75,000 to $85,000 (depending on experience and location). * 15 days per year of Paid Time Off (PTO). * 8 paid holidays + 1 personal floating holiday * 401(k) retirement plan with company match. * Eligible employees (and their families) are offered the following company-sponsored benefits: Medical, dental, and vision insurance, health savings account (HSA), short-term and long-term disability, employee assistance plan (EAP), and basic life and AD&D insurance. * Eligible employees (and their families) are offered the following voluntary employee-funded benefits: Health care flexible spending account, dependent care flexible spending account, commuter benefits, voluntary accident & critical injury coverage, voluntary long-term care coverage, and voluntary life and AD&D insurance. Beyondsoft provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type with regards to race, color, religion, age, sex, national origin, disability status, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, and the full employee lifecycle up through and including termination.

WHO WE ARE: Beyondsoft is a leading mid-sized business IT and consulting company that combines modern technologies and proven methodologies to tailor solutions that move your business forward. Our global head office is based in Singapore, and our team is made up of a diversely talented team of experts who thrive on innovation and pushing the bounds of technology to solve our customers' most pressing challenges. When it comes time to deliver, we set our sights on that sweet spot where brilliance, emerging technologies, best practices, and accountability converge. We have a global presence spanning four continents (North America, South America, Europe, and Asia). Our global network of talent and customer-centric engagement model enables us to provide top-quality services on an unprecedented scale. WHAT WE'RE ABOUT: We believe that collaboration, transparency, and accountability are the values that guide our business, our delivery, and our brand. Everyone has something to bring to the table, and we believe in working together with our peers and clients to leverage the best of one another in everything we do. When we proactively collaborate, business decisions become easier, innovation is greater, and outcomes are better. Our ability to achieve our mission and live out our values depends upon a diverse, equitable, and inclusive culture. So, we strive to foster a workplace where people have the respect, support, and voice they deserve, where innovative ideas flourish, and where people can unleash their brilliance. For more information regarding DEI at Beyondsoft, please go to ************************************** ADDITIONAL REQUIREMENT FOR REMOTE POSITIONS: For remote positions, all candidates must complete a video screen with our corporate recruiting team. Responsibilities POSITION SUMMARY: We are looking for an experienced Field Deployment Engineer to join our team to support one of top clients in [LOCATION TBD]. The engineer will directly work with client system engineers, local client logistics teams, and with other Field Deployment engineers remotely. Be responsible for deploying different types of robots to field, including preparation, data entry, data analysis, and post activities. This is a full-time, long term benefited position with competitive compensation WHAT YOU WILL BE DOING: Conduct regular risk assessments and provide recommendations for mitigating potential hazards Provide training and guidance to robotics operators, technicians, and other stakeholders on safe operating procedures and best practices Investigate incidents and near-misses, and develop corrective actions to prevent recurrence Collaborate with cross-functional teams to integrate safety considerations into robotics design, development, and deployment Service robotics equipment and ensure any issues are resolved in a timely manner to minimize downtime and maintain operational efficiency. Provisioning new robotics equipment and repositioning equipment across the data centers as needed. Enforcing tug utilization standards (how many racks = robotics needed) Pre-Deployment Phase Conduct site-by-site status assessments to ensure readiness for robotics deployment Develop and implement detailed project schedules by robotic type Create comprehensive training programs for operators, maintenance personnel, and supervisors Train operators on safe and efficient operation of new equipment Train personnel on equipment maintenance requirements and procedures Train supervisors on equipment operation, maintenance, and troubleshooting Introduce and deploy maintenance portal at each site with robotics Site Acceptance Testing Phase Collaborate with cross-functional teams to conduct site acceptance testing Identify and troubleshoot any issues that arise during testing Post-Deployment/Operationalization Phase Monitor and analyze key performance indicators (KPIs) such as: Equipment Utilization Rate Downtime, Maintenance Costs, Safety Incidents Throughput (original SAT vs operational in practice), Cycle Time (original SAT vs operational in practice) Vendor performance/Warranty (tracking of warranty work orders and estimated hours) Qualifications Bachelor's degree or higher in Computer Science, Computer Engineering, IT, or equivalent combination of education and experience Experience of Linux command line (at least understands basics) Basic ability to troubleshoot complex software / hardware configuration problems. Ability to function effectively in a fast-paced environment and manage continuously changing business needs; excellent time management skills required. PREFERRED QUALIFICATIONS: Experience of training program is a huge plus Any customer service skills is good to have Experience around safety programs is advantage Background in robotics-related tasks is preferred. DC/Server room experience is good to have WHAT WE HAVE TO OFFER: Because we know how important our people are to the success of our clients, it's a priority to make sure we stay committed to our employees and making Beyondsoft a great place to work. We take pride in offering competitive compensation and benefits along with a company culture that embodies continuous learning, growth, and training with a dedicated focus on employee satisfaction and work/life balance. A competitive pay range of $ 75,000 to $85,000 (depending on experience and location). 15 days per year of Paid Time Off (PTO). 8 paid holidays + 1 personal floating holiday 401(k) retirement plan with company match. Eligible employees (and their families) are offered the following company-sponsored benefits: Medical, dental, and vision insurance, health savings account (HSA), short-term and long-term disability, employee assistance plan (EAP), and basic life and AD&D insurance. Eligible employees (and their families) are offered the following voluntary employee-funded benefits: Health care flexible spending account, dependent care flexible spending account, commuter benefits, voluntary accident & critical injury coverage, voluntary long-term care coverage, and voluntary life and AD&D insurance. Beyondsoft provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type with regards to race, color, religion, age, sex, national origin, disability status, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, and the full employee lifecycle up through and including termination.

**INTRODUCTION and WHAT YOU WILL DO (Job Responsibilities)** Are you passionate about problem solving? Are you excited by solving real business challenges through innovation? Are you dedicated to collaborating with a cross functional team to provide a first-class customer experience? If so, come join the Gasboy Field Engineer Team as we continue to experience explosive growth in our Gasboy Business Unit serving customers in the commercial and industrial fueling industry. **About the Opportunity** Reporting to the customer operations manager, the Gasboy Field Engineer will play a critical role in continuously improving the customer experience. As a key member of the service operations team, you will spend most of your time in the field, supporting end customers and authorized service contractors with new product adoption, project rollouts, training, data collection, testing and onsite service and troubleshooting. **Key Responsibilities** + Support the on-site field service activities as the resident expert on Gasboy products to provide the ultimate consumer experience by diagnosing performance related issues, determining root cause, corrective actions, confirming resolution and regularly communicate with all stakeholders on status + Make recommendations for the development of effective training resources and troubleshooting guides with the product support specialist team + Provide recommendations to the market service manager to add or remove authorized service network providers to ensure best in class field service support for our customers + Ensure authorized serviced technicians are properly trained according to department compliance, work, and customer security requirements + Lead regular scheduled field training sessions with key service partners and distributors in a market for continuing education opportunities and knowledge transfer + Communicate with stakeholders to convey drivers of operational impact of findings to ensure contact center consistency, process alignment, and process improvements + Act as the communication liaison between internal stakeholders, customers and service contractors regarding on-site findings and resolution + Support PSS/Engineering as requested for onsite testing, data collection, and trouble shooting + Support ad hoc Service Operation's needs (contract maintenance, projects, FMS, etc.) for site related challenges + Utilize technical and analytical skills to support technical assistance center as expert on Gasboy product solutions + Maintain compliance with safety standards according to Gilbarco Veeder-Root, Customer and Regulatory policies **WHO YOU ARE (Qualifications)** + Preferred: Associates or bachelor's degree in computer science or networking + Preferred: 5 years or more of service in petroleum equipment with manufacturers certifications + Preferred: A+ and Linux certified or have the ability to obtain the A+ and Linux certifications within 90 days + Knowledge of Microsoft Windows, Excel, and Networking required + Knowledge of Linux and SQL a plus + Road Warrior- travel is 75% or more for this role to include overnight + Extensive experience interfacing with end customers + Experience in performing training to small and large groups + Exceptional work ethic with excellent analytical/troubleshooting skills + Ability to lift 30+ pounds, walk medium distances, and be on your feet for 2+ hours + Basic Electrical and Hydraulic knowledge required. Advanced a plus + Strong oral and written communication skills **Relationships** This position will interface with the following: **Internal** + Supervisor, Technical Support + Gasboy Service Manager + Gasboy Product Support Specialists + Gasboy Field Engineers + Area Service Managers + Authorized Service Contractors and Service Managers + Commercial Account Managers + Customer Service Agents + Service and Field Engineers **External** + Distributor Partners + End Users + Authorized Service Contractors + Installers **Personal Trait Profile** + Ability to multitask + Customer centric + Enjoys problem solving and trouble shooting + Results driven + Ability to remain calm in stressful situations + Attention to detail + Strong organization and prioritization skills + Self-directed, motivated, and diligent (comfortable taking ownership) + Problem solver + Analytical + Pragmatic The base compensation range for this position is $70,000 to $95,000 per annum. Your actual base salary will be determined based upon numerous factors which may include relevant experience, skills, location (labor market data), credentials (education, certifications), and internal equity. For this specific role, you may be eligible for overtime in accordance with state laws. Overtime hours are not guaranteed. Vontier partners with you and your family on your health and wellness journey. Visit VontierBenefits.com to view our benefits. We offer a premium suite of health and wellness programs for you and your family, including medical, dental, vision, disability and life insurance. With programs for family planning from Maven Clinic to managing diabetes like Livongo, coverage for women's health, support for adult and elder care, paid parental leave, a generous 401(k) plan with matching company contributions, and more. Vontier is here for all stages of life. We also offer paid time off up to 15 days each year, 12 paid holidays (including 2 floating holidays), and paid sick leave.* **Disclaimer:** The salary, other compensation, and benefits information is accurate as of the date of this posting. Sick leave amount may vary based on state or local laws applicable to the applicant's geographic location. The Company reserves the right to modify this information at any time, subject to applicable law. **WHO IS GILBARCO VEEDER-ROOT** Gilbarco Veeder-Root, a Vontier company, is the worldwide technology leader for retail and commercial fueling operations, offering the broadest range of integrated solutions from the forecourt to the convenience store and head office. For over 150 years, Gilbarco has earned the trust of its customers by providing long-term partnership, uncompromising support, and proven reliability. Major product lines include fuel dispensers, tank gauges and fleet management systems. **WHO IS VONTIER** Vontier (NYSE: VNT) is a global industrial technology company uniting productivity, automation and multi-energy technologies to meet the needs of a rapidly evolving, more connected mobility ecosystem. Leveraging leading market positions, decades of domain expertise and unparalleled portfolio breadth, Vontier enables the way the world moves - delivering smart, safe and sustainable solutions to our customers and the planet. Vontier has a culture of continuous improvement and innovation built upon the foundation of the Vontier Business System and embraced by colleagues worldwide. Additional information about Vontier is available on the Company's website at *************** . **At Vontier, we empower you to steer your career in the direction of success with a dynamic, innovative, and inclusive environment.** Our commitment to personal growth, work-life balance, and collaboration fuels a culture where your contributions drive meaningful change. We provide the roadmap for continuous learning, allowing creativity to flourish and ideas to accelerate into impactful solutions that contribute to a sustainable future. Join our community of passionate people who work together to navigate challenges and seize opportunities. At Vontier, you are not on this journey alone-we are dedicated to equipping you with the tools and support needed to fuel your innovation, lead with impact, and thrive both personally and professionally. **Together, let's enable the way the world moves!** "Vontier companies are equal employment employers and evaluate qualified applicants without regard to race, color, national origin, religion, ancestry, sex (including pregnancy, childbirth and related medical conditions), age, marital status, sexual orientation, gender identity or expression, and other characteristics protected by law."

is filled. Rise Broadband is seeking a highly motivated Field Network Technician to join our team. The successful candidate will be responsible for the maintenance, installation, and repair of telecommunications towers and related equipment. The technician will work with a team to ensure that all towers are in good working condition, meet safety standards, and are operating at maximum efficiency. Essential Duties/Responsibilities Perform routine maintenance on telecommunications towers and related equipment, including replacing or repairing parts as needed Conduct inspections of towers and equipment to ensure compliance with safety regulations and industry standards Install new telecommunications equipment on towers, including antennas, cables, and related hardware Work with a team to troubleshoot and diagnose problems with tower equipment and systems Use specialized tools and equipment, such as hand tools, power tools, and electronic testing equipment, to complete assigned tasks Climb towers to access equipment and perform maintenance and repair work Adhere to all safety protocols and guidelines when working at heights and in potentially hazardous environments Complete all required paperwork and documentation related to job duties Job Requirements High school diploma or equivalent required Previous experience working in telecommunications tower maintenance, repair, or installation preferred Ability to work at heights up to 400 feet and in potentially hazardous environments required Comfort with climbing ladders, towers, and other elevated structures required Ability to work with equipment that has a weight limit of 260 lbs or less required. Ability to read and interpret technical documents and schematics required Excellent problem-solving and troubleshooting skills required Strong communication and interpersonal skills required Ability to work independently or as part of a team required Valid driver's license and reliable transportation required Working Conditions Employee is constantly required to stand, walk, use hands to handle or feel objects, tools or controls and reach with hands and arms. Must possess physical conditioning and stamina to climb heights up to 400 feet and perform physically demanding tasks at such heights. Must be able to frequently climb a ladder and work in an elevated position. On a constant basis, must safely lift, carry and maneuver heavy or awkward objects 100 pounds or more, with or without assistance. Specific vision abilities required include close up, distance, peripheral vision, depth perception and the ability to adjust focus. Full spectrum color vision required. Must be able to work safely in a field or office environment. Must be adept at working in adverse weather conditions. Daily travel within the Company's geographical footprint is required. Disclaimer This job description is not meant to be an all-inclusive statement of every duty and responsibility which will ever be required of an employee in this position, however, the employee will be held responsible for all duties assigned. Please feel free to review our Benefits at the following link: **********************************************

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S. Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges. JOB SUMMARY - ESSENTIAL FUNCTIONS/DUTIES Under the general supervision of senior-level engineers, a Telemetry Field Engineer performs a variety of fundamental field engineering tasks involved in the design, development, installation, operations, testing, and maintenance of telemetry equipment and systems. Employee will be responsible to perform the following functions/duties: Support the design, integration and testing of fixed and mobile telemetry acquisition systems and equipment in the L, S, C and P frequency bands Specify antennas, recorders, distribution amplifiers, low-noise amplifiers (LNAs), receivers and various RF components associated with telemetry acquisition systems Assist field technicians and / or operators with operations and maintenance as required Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to telemetry engineering Perform engineering or other highly technical tasks that are varied and may be somewhat difficult in character Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques, such as tolerance studies and design calculations Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Generate sections of design specifications of more complex projects or complete specifications of less complex projects Using computer-assisted test methods, conduct laboratory investigations on equipment or systems Assist with preparation of drawings, documentation, reports, correspondence, or technical studies Prepare, deliver, and submit technical presentations for in-process design and review meetings Attend annual International Telemetry Conference (ITC) Perform other job-related duties, as required. REQUIREMENTS - EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 7 years of technical/professional experience in telemetry and / or RF engineering are required for this position. In addition, a Telemetry Field Engineer must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles and familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform routine to more complex engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Experience with computer networking, including networking methods of the transport of telemetry data over IP (TMoIP) is a plus Familiarity with Aeronautical Mobile Telemetry (AMT) and Range Commanders Council (RCC) IRIG standards: 106 - Telemetry Standards and 118 - Test Methods for Telemetry Systems and Subsystems Working knowledge of Terrain Analysis Program (TAP) RF software is a plus Working knowledge of MS Visio and / or AutoCAD is a plus Working knowledge of MS Office suite, particularly Word, Excel and Powerpoint Strong technical skills with aptitude and motivation to continuously learn and apply new technologies Effective verbal and written communication skills Planning, organizational and teamworking skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job. WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards. Work will also be performed in a field environment; all information and training will be given that is needed prior to entering this environment. Occasional lifting (up to 25 pounds), consistent sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required. Travel to remote company work locations will be required. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified. Tasking is in support of a Federal Government Contract that requires U.S. citizenship. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. SCC: JENG17; A3UTTR

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S. Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges. JOB SUMMARY - ESSENTIAL FUNCTIONS/DUTIES Under the general supervision of senior-level engineers, a Telemetry Field Engineer performs a variety of fundamental field engineering tasks involved in the design, development, installation, operations, testing, and maintenance of telemetry equipment and systems. Employee will be responsible to perform the following functions/duties: Support the design, integration and testing of fixed and mobile telemetry acquisition systems and equipment in the L, S, C and P frequency bands Specify antennas, recorders, distribution amplifiers, low-noise amplifiers (LNAs), receivers and various RF components associated with telemetry acquisition systems Assist field technicians and / or operators with operations and maintenance as required Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to telemetry engineering Perform engineering or other highly technical tasks that are varied and may be somewhat difficult in character Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques, such as tolerance studies and design calculations Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Generate sections of design specifications of more complex projects or complete specifications of less complex projects Using computer-assisted test methods, conduct laboratory investigations on equipment or systems Assist with preparation of drawings, documentation, reports, correspondence, or technical studies Prepare, deliver, and submit technical presentations for in-process design and review meetings Attend annual International Telemetry Conference (ITC) Perform other job-related duties, as required. REQUIREMENTS - EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 7 years of technical/professional experience in telemetry and / or RF engineering are required for this position. In addition, a Telemetry Field Engineer must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles and familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform routine to more complex engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Experience with computer networking, including networking methods of the transport of telemetry data over IP (TMoIP) is a plus Familiarity with Aeronautical Mobile Telemetry (AMT) and Range Commanders Council (RCC) IRIG standards: 106 - Telemetry Standards and 118 - Test Methods for Telemetry Systems and Subsystems Working knowledge of Terrain Analysis Program (TAP) RF software is a plus Working knowledge of MS Visio and / or AutoCAD is a plus Working knowledge of MS Office suite, particularly Word, Excel and Powerpoint Strong technical skills with aptitude and motivation to continuously learn and apply new technologies Effective verbal and written communication skills Planning, organizational and teamworking skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job. WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards. Work will also be performed in a field environment; all information and training will be given that is needed prior to entering this environment. Occasional lifting (up to 25 pounds), consistent sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required. Travel to remote company work locations will be required. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified. Tasking is in support of a Federal Government Contract that requires U.S. citizenship. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. SCC: JENG17; A3UTTR

JT4, LLC provides engineering and technical support to multiple western test ranges for the U.S. Air Force, Space Force, and Navy under the Joint Range Technical Services Contract, better known as J-Tech II. JT4 develops and maintains realistic, integrated test and training environments and prepares our nation's war-fighting aircraft, weapons systems, and aircrews for today's missions and tomorrow's global challenges. JOB SUMMARY - ESSENTIAL FUNCTIONS/DUTIES Under the general supervision of senior-level engineers, a Telemetry Field Engineer performs a variety of fundamental field engineering tasks involved in the design, development, installation, operations, testing, and maintenance of telemetry equipment and systems. Employee will be responsible to perform the following functions/duties: Support the design, integration and testing of fixed and mobile telemetry acquisition systems and equipment in the L, S, C and P frequency bands Specify antennas, recorders, distribution amplifiers, low-noise amplifiers (LNAs), receivers and various RF components associated with telemetry acquisition systems Assist field technicians and / or operators with operations and maintenance as required Conduct research and reference reading to assist higher-level engineers in obtaining technical information Keep informed of and study currently approved standards, codes, and procedures applied to telemetry engineering Perform engineering or other highly technical tasks that are varied and may be somewhat difficult in character Plan and carry out successive engineering steps and resolve technical problems by standard practices and techniques, such as tolerance studies and design calculations Support projects with limited scope or parts of more complex projects with detailed instructions on the intent and scope of the documents to be prepared Generate sections of design specifications of more complex projects or complete specifications of less complex projects Using computer-assisted test methods, conduct laboratory investigations on equipment or systems Assist with preparation of drawings, documentation, reports, correspondence, or technical studies Prepare, deliver, and submit technical presentations for in-process design and review meetings Attend annual International Telemetry Conference (ITC) Perform other job-related duties, as required. REQUIREMENTS - EDUCATION, TECHNICAL, AND WORK EXPERIENCE An associate's degree in engineering or other technical discipline, or formal academic/vocational/military training and a minimum of 7 years of technical/professional experience in telemetry and / or RF engineering are required for this position. In addition, a Telemetry Field Engineer must possess the following qualifications: Professional knowledge of applicable engineering concepts and principles and familiarity with related engineering fields Practical knowledge of test methods and practices sufficient to perform routine to more complex engineering procedures and to prepare or make minor modifications of standard test procedures or test equipment work instructions Experience with computer networking, including networking methods of the transport of telemetry data over IP (TMoIP) is a plus Familiarity with Aeronautical Mobile Telemetry (AMT) and Range Commanders Council (RCC) IRIG standards: 106 - Telemetry Standards and 118 - Test Methods for Telemetry Systems and Subsystems Working knowledge of Terrain Analysis Program (TAP) RF software is a plus Working knowledge of MS Visio and / or AutoCAD is a plus Working knowledge of MS Office suite, particularly Word, Excel and Powerpoint Strong technical skills with aptitude and motivation to continuously learn and apply new technologies Effective verbal and written communication skills Planning, organizational and teamworking skills BENEFITS Medical, Dental, Vision Insurance Benefits Active on Day 1 Life Insurance Health Savings Accounts/FSA's Disability Insurance Paid Time Off 401(k) Plan Options with Employer Match JT4 will match 50%, up to an 8% contribution 100% Immediate Vesting Tuition Reimbursement OTHER RESPONSIBILITIES Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to their job. WORKING CONDITIONS Work is performed in a typical office environment with no unusual hazards. Work will also be performed in a field environment; all information and training will be given that is needed prior to entering this environment. Occasional lifting (up to 25 pounds), consistent sitting and use of a computer terminal; constant use of sight abilities while writing, reviewing, and editing documents; constant use of speech/hearing abilities for communication; and constant mental alertness are required. Travel to remote company work locations will be required. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed by personnel assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of persons so classified. Tasking is in support of a Federal Government Contract that requires U.S. citizenship. Some jobs may require a candidate to be eligible for a government security clearance, state-issued driver's license, or other licenses/certifications, and the inability to obtain and maintain the required clearance, license, or certification may affect an employee's ability to maintain employment. SCC: JENG17; A3UTTR

ConeTec is an industry-leading provider of geotechnical site investigation services and specializes in the testing of subsurface conditions in unique environments. Working as a contractor within the industries of infrastructure, construction and mining, the Field Engineer is responsible for the safe, efficient and accurate operation of geotechnical and geophysical site investigation equipment. Given significant responsibility, the Field Engineer is tasked with the smooth and accurate execution of various projects, from deployment of equipment to data acquisition and submission. They will work closely with other equipment operators, gaining hands-on experience with unique heavy machinery and a sophisticated suite of geotechnical instruments in a variety of environments. The Field Engineer will assume numerous other roles as the ever-changing demands of the workplace dictate. The successful candidate must have well-developed interpersonal, organizational and communication skills as well as strong problem-solving abilities. This role requires significant and frequent travel to job sites, mostly within the Intermountain Western US, but sometimes beyond. Travel duration can often be 7-14 days at a time, but can vary longer or shorter, but can vary due to project demands. ConeTec offers generous Per Diem rates for out-of-town work. OVERALL GOALS FOR POSITION Develop a strong working knowledge of site investigation practices and procedures. Build comprehension of soil mechanics, in-situ testing, and geophysical field investigations. Gain experience and exposure as a contractor in several of North America's largest industries (mining, infrastructure, transportation, commercial development, etc). Expand skill set through training and certifications to become an asset of a larger team. Relentless focus on ConeTec's core values of SAFETY, QUALITY, PEOPLE and EQUIPMENT. ROLES, RESPONSIBILITIES & EXPECTATIONS Equipment Operation Familiarize with and operate CPTu equipment, VST, sampling systems, numerous geophysical instruments and other in-situ testing equipment in a safe and productive manner. Become trained, company-certified and competent to operate numerous types of drilling equipment and other pieces of equipment within our extensive fleet. Organize logistics for the mobilization and demobilization of equipment in hard-to-access environments. Inspect equipment for safety and function; report any issues or needs. Perform routine maintenance and repairs on various pieces of equipment to ensure optimal performance. Data Collection & Reporting Perform testing to collect data in a timely, orderly and accurate manner. Compile the collected data, sample logs, etc. daily and submit to the Data Team for further processing. Collect field notes and photos to guarantee the translation of information from field to office is as highly accurate as possible. With sufficient field experience, opportunities may be available to assist in preparing and compiling the final field data/report for our clients. Health & Safety Identify with and respect ConeTec's safety culture. Ensure proper preparation and knowledge of all necessary safe operating procedures before beginning any job. Report any safety-related incidents, infractions, or near misses to the Project Manager and the HSE Officer, immediately. Know and follow the incident reporting protocol at all times. Other General Responsibilities Communicate with Management as to any equipment problems or needs, as well as any field observations that might be of use. Perform other shop functions as required. Seek ways to improve operating procedures/processes. Must be able to perform physically demanding tasks, including lifting, moving heavy materials up to 50 lbs., climbing, crawling as well as walking on uneven ground, working long hours, and working in all weather conditions. SKILLS, QUALIFICATIONS and EXPERIENCE REQUIRED Education Requirements Bachelor's Degree in Engineering, Geology or Applied Science Experience/Skills Requirements Previous field experience is an asset, in addition to the academic experience noted above. Experience with Microsoft Excel and Microsoft Word is an asset. Electrical and mechanical skills are an asset, but not required. Technical Skill Requirements Experience with Microsoft Excel is an asset Electrical and mechanical skills are an asset but not required Soft Skill Requirements Must possess strong work ethic and represent the company in a professional manner. Must be able to establish and maintain effective working relationships. Must be responsible and work well independently or in a team setting with minimal supervision. Must enjoy working outdoors and traveling for extended periods of time (up to 2-3 weeks at a time, several times each year). Must enjoy performing a wide variety of duties and be able to manage multiple tasks and priorities. Certification Requirements Must have a clean driving record and current/valid driver license. Various industry trainings are an asset, but will be provided as needed for the role (MSHA, OSHA, HAZWOPER, etc)

**Power your future with Qualus** in our Field Engineering department as a Lead Relay Field Engineer. Our Lead Relay Technicians/ Lead Field Relay Engineer performs and leads teams that perform testing/routine maintenance of Transmission and Distribution substation power equipment, relaying (electro-mechanical, solid state and micro-processor), pilot channel equipment (power line carrier, pilot wire, transfer, transfer trip, fiber optic, CVT's, line tuners, line traps, etc.), controls and communications equipment. If you have experience in leading and mentoring relay/ protection and control teams. **Responsibilities** + Testing, including (without limitation): reading/verifying all voltage and current inputs to relays; verifying all metering (local and SCADA); calibrating all relays; trip testing (local and SCADA); verifying all alarms (local and SCADA); verifying all function switches, etc. + Performing routine troubleshooting and repair of substation relaying and control equipment. Commission new substations, power equipment, relaying (electro-mechanical, solid state and microprocessor), pilot channel equipment (power line carrier, pilot wire, transfer, transfer trip, fiber optic, CVT's, line tuners, line traps, etc.), controls and communications equipment + Leading, planning, scheduling, and completing test activities efficiently, on time, without service interruptions. + Providing Project Technical Support to Field Service personnel **Qualifications** + Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes + Experience is desirable in any of the following related areas: substation design (including protection & control engineering); substation construction; substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing. + 3 phase power systems; power system protection & control schemes; test equipment; test equipment software + Test equipment and toll/wiring usage; interpretation of wiring and elementary diagrams; basic test skills to perform duties listed above; basic PC skills. + Quickly learn and apply test procedure for various types of substation equipment; communicate effectively with diverse groups, tailoring communication for audience and situation. + Learn and apply client's switching procedures and safety measures as required. + Reference and complete assignments as described in applicable specifications. + Perform regular field work both indoors and outdoors. + Ability to read company manuals and reports, workplace rules and procedures; speak with poise and confidence, using correct English + Strong interpersonal skills, communication skills, business acumen, management ability + Proficient in Microsoft Office (Word, Excel and Outlook) + Valid Driver's license and good driving record \#LI-KS1 **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-UT-Bluffdale_ **ID** _2024-2515_ **Category** _Field Services_ **Position Type** _Regular Full Time_ **Remote:** _Yes_

Brown and Caldwell has an exciting opportunity for a self-motivated entry-level Project Engineer to join our team. We offer a collaborative, multi-discipline, and hybrid work environment to develop innovative designs for new water/wastewater related facilities, expansions, upgrades and retrofits. You will work with and be mentored by strong, nationally recognized, senior technical staff on various design projects across the United States. Hybrid work is allowed; selected candidate must be willing to live in the Salt Lake City, UT metro area. The ideal candidate will be interested in working on water projects focused on drinking water treatment, wastewater treatment, pump stations, conveyance and other related infrastructure projects. Additionally, our ideal candidate will have strong verbal and written communication skills, be highly organized, and be capable of working in a diverse team environment and handling multiple tasks with competing priorities. You will be working with technical staff and executing the following: Roles and Responsibilities: * Perform engineering work with our Municipal Design Discipline Team on water and wastewater projects, including treatment plants, pipelines, and pumping stations for municipal clients. * Work with teams on engineering designs, preparing reports, construction drawings, specifications, calculations, and equipment selection for various projects. * Perform preliminary design activities such as studies, data analysis, and alternatives analyses. * Prepare technical memoranda, reports, and electronic deliverables. * Check performance or conformity with plans and specifications through field inspections as part of engineering services during construction. * Conduct field work, such as site investigations, as necessary for various projects. * Communicate effectively and coordinate with project teams including other disciplines (Engineers, Designers). * Coordinate project work with geotechnical, architectural, process, civil, mechanical, instrumentation, and electrical engineers and consultants. Required Qualifications: * BS Degree in Engineering (Civil, Environmental, Chemical, or Mechanical). * Good technical skills with the ability to articulate ideas and concepts both visually and verbally. * Strong interest in developing water and wastewater treatment design skills. * Proficiency with Microsoft Suite including Word, Outlook, Project, Excel and PowerPoint. * Strong understanding of fundamental technical topics, including: * Fluid Mechanics * Hydraulic Engineering * Water/Wastewater Chemistry * Water/Wastewater Treatment Processes Preferred Qualifications: * MS degree in Civil/Environmental Engineering, Water Resources Engineering, or related field. * Proficiency with Engineering calculation and modeling software such as Mathcad, AFT Fathom, and/or AFT Arrow * Experience with ProjectWise, Bluebeam, and BIM360, Autodesk Construction Cloud, and/or SpecLink. * Strong understanding of advanced technical topics, including: * Pumping systems * Hydrology * Field/construction experience * EIT qualifications or intent to pursue EIT standing. Salary Range: The anticipated starting pay range for this position is based on the employee's primary work location and may be more or less depending upon skills, experience, and education. These ranges may be modified in the future. Location A Salary: $58,000 - $79,000 You can view which BC location applies to you here. If you have any questions, please speak with your Recruiter. Benefits and Other Compensation: We provide a comprehensive benefits package that promotes employee health, performance, and success which includes medical, dental, vision, short and long-term disability, life insurance, an employee assistance program, paid time off and parental leave, paid holidays, 401(k) retirement savings plan with employer match, performance-based bonus eligibility, employee referral bonuses, tuition reimbursement, pet insurance and long-term care insurance. Click here to see our full list of benefits. About Brown and Caldwell Headquartered in Walnut Creek, Calif., Brown and Caldwell is a full-service environmental engineering and construction firm with 50 offices and 2,100 professionals across North America and the Pacific. For more than 75 years, we have created leading-edge environmental solutions for municipalities, private industry, and government agencies. We strive to be the company of choice-to our clients, who benefit from our passion for delivering exceptional quality, and to our employees, present and future, who share our commitment to client service, collaboration, and innovation. Join us, and you will find a home where you can do your best work, reach new levels of expertise, and enjoy exceptional development opportunities. For more information, visit ************************ This position is subject to a pre-employment background check and a pre-employment drug test. Notice to Third Party Agencies: Brown and Caldwell does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request with Brown and Caldwell, Brown and Caldwell reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Brown and Caldwell is proud to be an EEO/AAP Employer. Brown and Caldwell encourages protected veterans, individuals with disabilities, and applicants from all backgrounds to apply. Brown and Caldwell ensures nondiscrimination in all programs and activities in accordance with Title VI of the Civil Rights Act

Job Description This Entry Level or Mid-Level Project Engineer position in the landing gear industry is with the ES3 Mechanical Systems/Wheels/Brakes Design and Analysis Group. The engineer will be responsible for performing a variety of mechanical engineering functions to include, but not limited to: Reliability/maintainability data analysis, risk assessments, new designs, redesigns, CAD modeling and drawing development, prototyping, Aircraft system level requirements analysis, test fixture development and airworthiness certification on a variety of military platforms. Much of the engineering effort is centered around incorporating new technology on military aircraft platforms. This is a multi-faceted position that requires a variety of engineering skills and offers an opportunity to be at the cutting edge of design and analysis techniques and will be surrounded with experts in their fields who consistently impact aerospace engineering projects that surpass industry norms. Applicant must be a good problem solver, be self-motivated and work well in a team-oriented environment. ES3 professional staff are the talent that makes ES3 successful. You will be one within the highly valued rank of professional staff. You will have access to state-of-the art equipment, modern work facilities, and flexible schedules. This Engineering position is planned for our Layton, Utah engineering office. This facility boasts private offices, more than 75 engineers, scientists, and technicians, along with proximity to our 240,000 square foot aerospace R&D laboratory, prototyping, testing, and production center. ES3 also has facilities in downtown San Diego, California; Warner Robins, Georgia; Midwest City, Oklahoma and Abilene, Texas. All our facilities have people steeped in a corporate culture that promotes a friendly and enjoyable workplace. Knowledge, Skills, and Abilities Required/Preferred: 3D CAD Modeling and Drawing Experience (SolidWorks preferred) Reliability/Maintainability and Repair Data Analysis Conduct Trade Studies Requirements Analysis Determine Interface Requirements, Find Replacement Components, Design Modifications to Enable New Components to Interface with Existing Systems Test Fixture Design Problem Solving Skills Adept Report and Technical Writing Must Be Able to Work Independently, Multitask and Prioritize Excellent Verbal and Written Communication Skills and Excel in a Team Environment Proficient in Microsoft Office Suite Education & Experience Required: Minimum of B.S in Mechanical Engineering 0-10 Years' Experience in Aerospace/Mechanical Design/Analysis or Related Field CAD Modeling Other Requirements: Candidate must be a U.S. Citizen As a condition of employment, candidates will be required to participate in a background investigation and be able to obtain a U.S. Government Security Clearance Ability to travel as required (less than 20%) Key Competencies: Excellent verbal and written communication skills An aptitude to learn new technology Positive, pleasant and professional attitude with all levels of staff, customers and government representatives Initiative and pro-active, flexible and open to changing priorities Strong work ethic, high integrity and high motivation for excellence Dependability and reliability Compensation and Benefits: ES3 can offer an environment that is enriching, rewarding and competitive in total compensation. Our total compensation is inclusive of the exceptional benefits program ES3 offers to all benefit eligible staff members. These include: Medical Insurance Dental Insurance Vision Insurance Life Insurance Disability Insurance Flexible Spending Account and Health Reimbursement Account Health Savings Account Competitive Paid-Time-Off accrual Holiday Pay A generous matching 401K plan with up to 6% match and up to 2% profit sharing. From our experience, staff members who participate in our company 401(k) plan are more engaged in our company than staff who do not. Thus, we try to partner with individuals who reinforce our company culture. Please visit our website at ************** to learn more about us. ES3 Overview ES3 takes great care to ensure we maintain just corporate policies, effective personnel management, and aggressive compensation packages. As a result, ES3 has a proven track record of successful recruitment and stellar retention of professional staff. ES3 has a purposeful business mission-to improve the performance, maintenance, and supply of mission-critical and safety-of-flight aerospace systems while reducing the hazardous exposures of aviation maintenance crews and reducing the environmental impact of aerospace operations and production processes. At ES3 you can feel good that your daily work activities support the broader objectives of improving aviation performance / safety, reducing the environmental impact of aviation, and improving the safety and work conditions for aviation workers. ES3 has a strong corporate culture of camaraderie, excellence, and effectiveness that truly stands out in today's aerospace industry. Each of ES3's locations work hard to maintain a secure, healthy, family-friendly, positive, and cooperative work environment. Joining ES3 will be like joining a family that will make sure you are happy with your work, your office environment, and your fellow co-workers. You can take pride in your work, enjoy engaging with your co-workers, and thrive in your field of expertise. Once you join ES3, you'll want to make it your forever employer.

U.S. Citizenship is Required. Ability to qualify for a US Department of Defense Top Secret security clearance required. Candidate must be SAP and SCI program eligible. Full-time opportunity in Clearfield, Utah with relocation allowance. This position is in-person. The Project Engineer on the Aerospace Hardware Team will lead and manage the planning, execution, and oversight of projects focused on the design, integration, and testing of advanced electromechanical systems for flight test experiments. This role involves creating detailed project plans, tracking progress, and reporting status, risks, and achievements to stakeholders. The Project Engineer will coordinate efforts across cross-functional teams to resolve technical challenges and ensure successful project delivery within schedule and budget constraints. The ideal candidate will have 5 or more years of engineering experience and a proven track record of developing solutions and collaborating across engineering teams to deliver high performing and reliable systems. Responsibilities: Lead system engineering efforts through requirements analysis, design, integration, testing, and validation Develop and maintain system architecture, interface specifications, and technical documentation Collaborate with cross-functional teams (hardware, software, test, and operations) to ensure system functionality and performance Support risk management, trade studies, and system performance evaluations Provide technical input on proposals, project plans, and schedules Ensure compliance with industry standards, customer requirements, and organizational processes Support troubleshooting, root cause analysis, and corrective actions for system-level issues Requirements Bachelor's or advanced degree in Electrical Engineering, Mechanical Engineering, Physics, or a related technical field 5+ years of experience in engineering, integration, and testing Strong understanding of engineering development processes (requirements development, review life cycle, verification & validation) Familiarity with testing standards (INCOSE SE Handbook, MIL-STD, and ISO standards) Excellent analytical, problem-solving, and communication skills Previous experience with DOD programs and unmanned aircraft systems is highly desirable Must be customer-focused, detail-oriented, and capable of working with multiple teams to resolve technical problems Ability to work independently and collaboratively in a team environment Ability to obtain and maintain a DoD security clearance is required WE OFFER AN EXCEPTIONAL EMPLOYEE BENEFITS PACKAGE! Competitive Industry Pay 100% Employer-Paid Medical Insurance Premium HSA with Employer Contributions Dental and Vision Coverage Options Paid Holidays Paid Vacation and Sick leave Company Funded 401(k) and Profit Sharing Plans Employee Stock Ownership Plan (ESOP) Life and Disability Insurance Paid Parental Leave Discretionary Bonus Eligibility The annual pay range for the Electrical Engineer position is $125,000 to $190,000. The posted pay range values provide the candidate with guidance on annual base compensation for the position, at a full time level of effort, exclusive of overtime, bonus, and benefits-related compensation, over a range of qualifications that may fit hiring objectives. Toyon Research Corporation will consider the individual candidate's education, work experience, applicable knowledge, skills and training, among other factors, when preparing an offer of employment. Pay Transparency Nondiscrimination Provision Equal Opportunity Employer including Disability and Veterans Applicant Privacy Notice Learn more about our company in our latest video, We are Toyon. The application window for this posting will remain open until the position is filled. Ref #2621-H

What is the Opportunity? We are looking for an enthusiastic and motivated Project Engineer. The role will be based out of Salt Lake City, UT with a hybrid work schedule, 50% in office and 50% from home. The role will require occasional travel (1-5 times per year is typical). What is the role? * Review all applicable job data, including plans and specifications, to determine project requirements. * Manage the technical aspects of assigned projects through the engineering process. * Perform engineering analysis as needed and prepare required calculations, models, layouts, detailed drawings, specifications and instructions, with limited supervision. * Check calculations, models, layouts, detailed drawings, specifications and instructions prepared by drafters/designers and other engineers. * Knowledge of heavy equipment and rotating machine design. * Ability to read and understand fabrication, erection, and standard engineering drawings * Knowledge of welding, fabrication, and assembly techniques pertaining to structural steel * Communicate directly with the customer together with the project manager to resolve technical issues. * Provide technical support to shop and field start-up services. * Document and update design procedures on a regular basis. * Advises project engineers, project managers and/ or other managers on project status. Does this sound like you? * Bachelor of Science in Mechanical or Civil engineering from an ABET accredited university with a minimum of 2 years' experience in steel design or in water/wastewater equipment design. * Ability to apply advanced mathematical equations to complex situations. * Proficiency in a 3D modeling software application. * Knowledge of drafting standards for both mechanical and structural design, including geometric dimensioning and tolerancing GD&T. * Proficiency in Autodesk Inventor and Vault. * Experience using and generating parametric models. * Ability to lift up to 30LBS Don't meet every single requirement? If you carry a strong sense of ownership and teamwork in everything you do, we'd like to hear from you. Why work at Ovivo? * Medical, Dental and Vision benefits * 401k Match * Company paid life insurance along with company paid short and long-term disability * 11 paid holidays * 3 weeks of PTO (hire date determines number of PTO hours for the first year) * 16 personal hours (hire date determines number of personal hours for the first year) * Days off between Christmas Eve and New Year's Day - paid by the company with no impact to PTO balance. At Ovivo we are committed to providing working environments where everyone is included and treated fairly and with respect. Dive in - Apply Today! Let's change the future of water together. About Ovivo Ovivo is a global provider of equipment, technology, and systems producing among the purest water and treating some of the most challenging wastewater in the industry. Ovivo is a powerful global brand with renowned trademarks, possessing more than 150 years of expertise and references in water treatment, supported by its proprietary products, advanced technologies, and extensive system integration knowhow. Ovivo delivers conventional to highly technological water treatment solutions for the industrial and municipal markets and leverages its large installed base of equipment around the world to offer parts and services to its customers. Ovivo is dedicated to innovation in an industry that is in constant evolution and offers water treatment solutions that are cost-effective, energy-efficient, and environmentally sustainable. Visit our website to learn more about Ovivo : *******************************

Take Your Geotechnical Career to the Next Level Are you ready to be challenged, make a difference, and experience professional growth in your career? Kleinfelder's Geotechnical team is looking for you! From earthquake and seismic engineering to the latest trenchless technology methods, Kleinfelder's Geotechnical Services support the planning, engineering, and construction of complex projects, and our specialists are leading experts in their fields. Step into Your New Role Kleinfelder is seeking a Project Professional within our Salt Lake City office. This is a great opportunity for someone looking for a role where they can execute project work, partner with senior professionals, provide mentorship to junior staff, collaborate with multidiscipline teams, and engage with clients. The ideal candidate will: Perform and develop scopes for field and office tasks (technical and non-technical) and independent analysis. Safely conduct field exploration, sampling, inspection, analysis and technical support under supervision. Coordinate tasks and small projects with guidance and interaction by senior operations/technical staff. Prepare designs, reports and calculations on complex projects for review. We are looking for someone with the ability to provide quality technical support on commercial, municipal, transportation, energy and water projects. Experience on design/build projects preferred. Strong analytical skills are required in areas including: soil and rock classification, slope stability analysis, earth retention systems, shallow and deep foundation design, materials testing and engineering soil improvement techniques, and pavement design. Knowledge of infrastructure, drilling operations and heavy civil project design and construction are preferred. Education & Experience: 6 to 10 years of related experience or 4 years related experience with a Master's or 2 years of related experience with PhD. Registered Professional Engineer (PE) License Must have a positive work attitude and ability to work safely and efficiently when managing multiple tasks Ability to work independently or with a team in a multi-disciplinary environment Excellent written and verbal communication skills Intermediate knowledge of MS Office, Including Word, Excel, and Power Point preferred The successful candidate will have the ability and willingness to travel and perform field work, even under inclement weather and physically demanding conditions. Position will require the candidate to adhere to work assignments/schedules, be self-motivated, organized and have a keen sense of detail. Candidate must be willing to work in addition to a standard 40-hour work week when needed. Move Forward with Kleinfelder Kleinfelder has been connecting great people to the best work since 1961. We are engineers, scientists, and construction professionals providing solutions that improve our clients' transportation, water, energy, and other private infrastructure. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to doing the right thing, every day, on every project from over 100 offices in the US, Canada, and Australia. Connecting great people to the best work is our purpose - together, we deliver. Progress with an Employer that Values You Kleinfelder is an inclusive organization free from discrimination. We are a stronger organization when we are a diverse workforce and believe that through diversity, equity, and inclusion comes creativity, innovation, and unity. We are proud to offer the following: Benefits: Kleinfelder offers an excellent compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, and paid holidays. Career Development: We are committed to investing in the professional development of our staff, offering each employee every opportunity to grow, develop, and take control of their career paths. We support these efforts through reimbursements for continuing education as well as many of the expenses associated with trainings and certifications, and opportunities for career development through our internal Mentoring Program. Equal Opportunity: Kleinfelder is an Equal Opportunity Employer - Minorities/Women/Disabled/Veterans. (Compliant with the new VEVRAA and Section 503 rules) NOTICE TO THIRD PARTY AGENCIES Please note that Kleinfelder does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, Kleinfelder will not consider or agree to payment for any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, Kleinfelder explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resume, including those submitted to hiring managers, are deemed to be the property of Kleinfelder.

is filled. Rise Broadband is seeking a highly motivated Field Network Technician to join our team. The successful candidate will be responsible for the maintenance, installation, and repair of telecommunications towers and related equipment. The technician will work with a team to ensure that all towers are in good working condition, meet safety standards, and are operating at maximum efficiency. Essential Duties/Responsibilities Perform routine maintenance on telecommunications towers and related equipment, including replacing or repairing parts as needed Conduct inspections of towers and equipment to ensure compliance with safety regulations and industry standards Install new telecommunications equipment on towers, including antennas, cables, and related hardware Work with a team to troubleshoot and diagnose problems with tower equipment and systems Use specialized tools and equipment, such as hand tools, power tools, and electronic testing equipment, to complete assigned tasks Climb towers to access equipment and perform maintenance and repair work Adhere to all safety protocols and guidelines when working at heights and in potentially hazardous environments Complete all required paperwork and documentation related to job duties Job Requirements High school diploma or equivalent required Previous experience working in telecommunications tower maintenance, repair, or installation preferred Ability to work at heights up to 400 feet and in potentially hazardous environments required Comfort with climbing ladders, towers, and other elevated structures required Ability to work with equipment that has a weight limit of 260 lbs or less required. Ability to read and interpret technical documents and schematics required Excellent problem-solving and troubleshooting skills required Strong communication and interpersonal skills required Ability to work independently or as part of a team required Valid driver's license and reliable transportation required Working Conditions Employee is constantly required to stand, walk, use hands to handle or feel objects, tools or controls and reach with hands and arms. Must possess physical conditioning and stamina to climb heights up to 400 feet and perform physically demanding tasks at such heights. Must be able to frequently climb a ladder and work in an elevated position. On a constant basis, must safely lift, carry and maneuver heavy or awkward objects 100 pounds or more, with or without assistance. Specific vision abilities required include close up, distance, peripheral vision, depth perception and the ability to adjust focus. Full spectrum color vision required. Must be able to work safely in a field or office environment. Must be adept at working in adverse weather conditions. Daily travel within the Company's geographical footprint is required. Disclaimer This job description is not meant to be an all-inclusive statement of every duty and responsibility which will ever be required of an employee in this position, however, the employee will be held responsible for all duties assigned. Please feel free to review our Benefits at the following link: **********************************************

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Defense Systems is seeking a Staff Engineer - Structural. This position is located in Roy, UT and supports the Sentinel program. This role may offer a competitive relocation assistance package. The Sentinel Infrastructure Analysis Team oversees the design/analysis of the facilities and related subsystems that support the future upgrade to the Minuteman III missile as well as the unique flight test facilities. Our teams are hiring Analysis Engineers within areas of focus: Structural Engineering/Analysis, Thermal Analysis, Bolted Joint analysis, Welded Joint Analysis, etc. Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications. What You'll Get to Do: Execute linear and nonlinear structural analysis scope using ABAQUS, Ansys, or FEMAP (w/Nastran solver). Direct and review analysis efforts related to infrastructure and subsystem development. This includes finite element (static, transient, buckling, modal), weld, and bolted joint analyses. Support test objective development for model verification/validation and qualification. Generate analysis documentation artifacts and prepare CDRL for customer deliveries. Deliver required Analysis Data Packages on time to meet program objectives. Identify gaps and holes within analyses and/or requirements and collaborate with other stakeholders to resolve these with minimal impact to budget and schedule. Ensure the developed technical solution and ADPs meet the analysis and design requirements and product specifications from the various element/configured item specifications. As a full-time employee of Northrop Grumman, you are eligible for our robust benefits package including: Medical, Dental & Vision coverage 401k Educational Assistance Life Insurance Employee Assistance Programs & Work/Life Solutions Paid Time Off Health & Wellness Resources Employee Discounts This position's standard work schedule is a 9/80. The 9/80 schedule allows employees who work a nine-hour day Monday through Thursday to take every other Friday off. Basic Qualifications: Bachelor's degree in Science, Technology, Engineering or Math (STEM) with 12 years' experience; 10 years' experience with a Master's degree; or 8 years' experience with a PhD Must be a US Citizen with an active DoD Secret Clearance with an investigation date within the last 6 years U.S. Citizenship with the ability to obtain Special Program Access (SAP) Experience performing static and dynamic structural analyses (modal, shock, vibration, transient loading). Proficiency with ABAQUS, FEMAP, or ANSYS software Experience creating analysis documentation and presenting results to peers and leadership Experience leading analysis teams and managing individual assignment tasking Experience creating formalized analysis workflows and processes Preferred Qualifications: Proficient writer and able to verbally communicate technical content Advanced or expert proficiency with ABAQUS, FEMAP, and ANSYS Exposure to structural test applications Experience with seismic analysis (ASCE 7) Exposure to missiles program requirements & with propulsion Navigate through NX 3D models and CPLM TeamCenter CPLM experience Strong oral and written communication skills, including demonstrated experience with high value customer presentations, with ability to focus on multiple projects with competing priorities. Demonstrated experience in making sound decisions in uncertain and difficult situations. Strong sense of urgency and work ethic in ensuring engineering meets customer and program expectations in a timely and efficient manner. Experience in leading/supporting a development engineering team. Demonstrated experience working with customers to ensure project success. #Sentinelmechanical Primary Level Salary Range: $152,900.00 - $229,300.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

General Description ES3 is seeking to hire an Entry Level or Mid-Level mechanical engineer responsible for performing a variety of mechanical engineering functions, which primarily include, but are not limited to: Dynamic modeling and real-time hardware in the loop simulation Instrumentation design Test execution and support Data analysis and documentation The engineer must have experience with Matlab and would benefit from a working knowledge of Simulink. Being a good problem solver, self-motivated and having the ability to work well in a team-oriented environment will set you apart from other candidates for this position. This position may also require the following: Solid modeling Aircraft system level requirements analysis Landing gear repair analysis, and Test fixture development on a variety of military platforms. This is a matrixed position where you will support several project managers in the execution of instrumentation efforts, data acquisition planning, simulation design/execution, data analysis, and report generation. You will collaborate with a senior mechanical engineer for technical direction and project prioritization. Being a good problem solver, self-motivated and having the ability to work well in a team-oriented environment will set you apart from other applicants. This Engineering position is planned for our Layton, Utah engineering office. This facility boasts private offices, more than 75 engineers, scientists, and technicians, along with proximity to our 240,000 square foot aerospace R&D laboratory, prototyping, testing, and production center. ES3 also has facilities in downtown San Diego, California; Warner Robins, Georgia; Midwest City, Oklahoma and Abilene, Texas. All our facilities have people steeped in a corporate culture that promotes a friendly and enjoyable workplace. Essential Duties and Responsibilities: Develop Matlab Routines to Process and Analyze Data Develop Aircraft Equations of Motion and Implement Computational Models in Simulink for Real Time Simulation on Physical Aircraft Hardware Test Plan Development and Reporting Instrumentation Design Including Sensor Selection, Layout, and Capture Rates Test Execution Support and Results Analysis Drawing and CAD Model Development in SolidWorks Determine Interface Requirements, Design Modifications to Enable New Components to Interface with Existing Systems Adept Report Writing Skills Knowledge, Skills, and Abilities Required/Preferred: Matlab and Simulink Fundamental Understanding of Multi-Degree of Freedom Rigid Body Dynamics 3D CAD Modeling Experience (SolidWorks preferred) Requirements Analysis Problem Solving Skills Technical Writing Must Be Able to Work Independently, Multitask and Prioritize Excellent Communication Skills and Excel in a Team Environment Proficient in Microsoft Office Suite Education & Experience Required: Minimum of B.S. in Mechanical Engineering Entry level is acceptable, experience in efforts described in the “Description” section above are desired Other Requirements Candidate must be a U.S. Citizen As a condition of employment, candidates will be required to participate in a background investigation and be able to obtain a U.S. Government Security Clearance Ability to travel if required Other Things That Will Help You Succeed in This Position: You have excellent verbal and written communication skills You have the aptitude to learn new technology You always have a positive, pleasant, and professional attitude with all levels of staff, customers, and government representatives You work effectively and are a team player You meet company goals and deadlines in a timely and efficient manner You take initiative and are pro-active, flexible and open to changing priorities You have a strong work ethic, high integrity and high motivation for excellence You are dependable and reliable You show up on time and work a regular schedule You are a self-starter capable of receiving direction and completing tasks with minimal supervision based on prior work experience Ability to travel as required (depending on project phase) Benefits: ES3 can offer an environment that is both enriching and rewarding. ES3 offers an exceptional benefits program including: Medical Insurance Dental Insurance Vision Insurance Life Insurance Disability Insurance Flexible Spending Account and Health Reimbursement Account Health Savings Account Competitive Paid-Time-Off accrual Holiday Pay A generous matching 401K plan with up to 6% match and up to 2% profit sharing From our experience, staff members who participate in our company 401(k) plan are more engaged in our company than staff who do not. Thus, we try to partner with individuals who reinforce our company culture. Please visit our website at ************** to learn more about us. ES3 Overview ES3 takes great care to ensure we maintain just corporate policies, effective personnel management, and aggressive compensation packages. As a result, ES3 has a proven track record of successful recruitment and stellar retention of professional staff. ES3 has a purposeful business mission-to improve the performance, maintenance, and supply of mission-critical and safety-of-flight aerospace systems while reducing the hazardous exposures of aviation maintenance crews and reducing the environmental impact of aerospace operations and production processes. At ES3 you can feel good that your daily work activities support the broader objectives of improving aviation performance / safety, reducing the environmental impact of aviation, and improving the safety and work conditions for aviation workers. ES3 has a strong corporate culture of camaraderie, excellence, and effectiveness that truly stands out in today's aerospace industry. Each of ES3's locations work hard to maintain a secure, healthy, family-friendly, positive, and cooperative work environment. Joining ES3 will be like joining a family that will make sure you are happy with your work, your office environment, and your fellow co-workers. You can take pride in your work, enjoy engaging with your co-workers, and thrive in your field of expertise. Once you join ES3, you'll want to make it your forever employer.

What is the Opportunity? At Ovivo, we offer you the opportunity to expand your skills and professional experience while collaborating with worldwide experts in water treatment. As a Project Engineer, you will combine mechanical engineering expertise with strong project management skills in a dynamic, cross-functional environment. You will lead technical design efforts and oversee project execution from initial conception through completion. In this role, you will collaborate closely with sales, contract administration, engineering, procurement, and finance teams. Success requires being a team player with excellent communication skills. Joining Ovivo means being part of a global team of innovative and passionate professionals who are committed to preserving water, our planet's most critical resource. It also means combining our efforts and talents towards a more sustainable future - together. The role is based in our Salt Lake City, UT office, and will enjoy our Hybrid working environment. Travel required: Typically, less than 15-20% travel. What is the role? * Review project data, plans and specifications, to determine requirements. * Manage the technical aspects of assigned projects through the engineering process. * Perform engineering analysis and prepare calculations, models, layouts, drawings, specifications, and instructions, with limited supervision. * Verify work prepared by drafters, designers and other engineers. * Communicate directly with the customer to resolve technical issues. * Provide technical support to shop and field start-up services. * Document and update design procedures regularly. * Ensure compliance with industry standards and safety regulations. * Coordinate the overall profit and loss schedules for project deliverables. * Creation of procurement schedules, deliverables lists and work breakdown schedules. * Facilitate project booking, design, development, delivery, completion, and profitability of assigned projects. * Monitor project schedules and communicate updates to customers and internal teams. * Participate in equipment start-up and provide technical training. * Recommend product improvements and standardizations. * Suggest enhancements to Quality Assurance and Quality Control processes. * Prepare accounting documents on progress and final invoicing. * Evaluate and manage warranty claims. * Negotiate contractual duties. * Perform other duties as assigned. Does this sound like you? * Bachelor of Science in Mechanical or Civil engineering from an ABET accredited university with a minimum of 2 years' experience. * Skilled in applying advanced mathematical equations to complex engineering problems. * Proficient in a 3D modeling software application (experience with Autodesk Inventor and Vault preferred but not required). * Able to read and interpret fabrication, erection, and standard engineering drawings * Knowledgeable in welding, fabrication, and assembly techniques for structural steel. * Experienced in reading, analyzing, and interpreting complex technical documents (e.g., engineering specifications, mechanical fabrication drawings, contracts). * Capable of identifying project risks and developing mitigation strategies. * Strong technical communication skills, both verbal and written, with the ability to deliver presentations. * Able to work independently and reliably. * Solid understanding of project management principles. * Preferred: Familiarity with basic control systems such as VFD's, PLC's, and Motor Control. * Ability to lift up to 30LBS Don't meet every single requirement? If you carry a strong sense of ownership and teamwork in everything you do, we'd like to hear from you anyway. What we offer as an employer At Ovivo, teamwork is at the heart of everything we do. We value work-life balance and strive to provide an engaging work environment along with excellent benefits and career progression opportunities. We offer: Hybrid work environment - while most of your time will be spent in the office, you'll be equipped to work between the office and remotely. Benefits - all full-time employees are eligible for Ovivo's generous benefits package that includes: * Medical, Dental and Vision benefits * 401k Match of 4% * Parental Leave * Company paid life insurance along with company paid short and long-term disability * 11 paid holidays * Three weeks of PTO per year (prorated based on start date) * Roll over of 64 PTO hours to the following year * Sixteen personal hours hire date determines number of personal hours for the first year * Days off between Christmas Eve and New Year's Day - paid by the company with no impact to PTO balance. * Profit sharing At Ovivo we are committed to providing working environments where everyone is included and treated fairly and with respect. Dive in - Apply Today! Let's change the future of water together. About Ovivo Ovivo is a global provider of equipment, technology, and systems producing among the purest water and treating some of the most challenging wastewater in the industry. Ovivo is a powerful global brand with renowned trademarks, possessing more than 150 years of expertise and references in water treatment, supported by its proprietary products, advanced technologies, and extensive system integration knowhow. Ovivo delivers conventional to highly technological water treatment solutions for the industrial and municipal markets and leverages its large installed base of equipment around the world to offer parts and services to its customers. Ovivo is dedicated to innovation in an industry that is in constant evolution and offers water treatment solutions that are cost-effective, energy-efficient, and environmentally sustainable. Visit our website to learn more about Ovivo : ******************************* #LI-Hybrid