Journeyman lineman jobs in Winter Park, FL - 86 jobs

Job Title: Underground Journeyman Lineman FLSA Status: Non-Exempt The Underground Journeyman Lineman is responsible for the installation, maintenance, repair, and troubleshooting of underground electrical power distribution systems. This role performs energized and de-energized underground work, including cable pulling, splicing, terminations, fault locating, and switching operations. The position requires a strong understanding of underground electrical systems, strict adherence to safety protocols, and the ability to work in physically demanding field environments. Essential Duties and Responsibilities * Install, maintain, and repair underground electrical power distribution systems. * Perform underground cable pulling, splicing, and terminations using approved tools and methods. * Conduct live-line maintenance (gloving) and hot-stick work on energized systems where qualified. * Investigate, troubleshoot, locate, and repair underground cable faults using diagnostic equipment. * Assist with switching, tagging, and outage restoration activities as required. * Operate trenching equipment, digger derricks, cable pullers, hydraulic tools, and related machinery. * Read and interpret electrical prints, blueprints, schematics, work orders, and system diagrams. * Work in trenches, vaults, conduits, and confined spaces while maintaining situational awareness and safety compliance. * Lead or participate in Job Hazard Analysis (JHA) pre-job and post-job meetings. * Maintain compliance with OSHA standards, company safety policies, and PPE requirements. * Communicate effectively with crew members, supervisors, and other project personnel. * Complete daily reports, documentation, and work orders related to installation and maintenance activities. * Provide guidance and training to assigned personnel and support development toward foreman responsibilities. Knowledge, Skills, and Abilities * Strong understanding of underground power distribution systems and electrical theory. * Proficiency in underground cable rehabilitation techniques and equipment. * Knowledge of national and local electrical codes and safety regulations. * Ability to safely work near energized high-voltage electrical systems. * Skilled in the use of hand tools, power tools, and diagnostic equipment. * Ability to respond effectively to emergency situations and hazardous conditions. * Strong communication skills with the ability to work collaboratively in a team environment. * Dependable, trustworthy, and able to manage multiple priorities under time constraints. * Physical ability to lift heavy equipment, climb, crawl, and work in confined or outdoor environments in various weather conditions. Education and Experience * High school diploma or GED required. * Journeyman Lineman certification or minimum of 4-5 years of verifiable underground or journeyman-level electrical experience. * Completion of a lineman apprenticeship program or equivalent field experience preferred. * Minimum of 2-4 years of underground electrical work experience preferred. * Valid Class A Commercial Driver's License (CDL) required, with acceptable driving record. * Experience working on and around energized high-voltage primary electric lines required. Pre-Employment Requirement Candidates who accept an offer of employment are required to undergo and successfully complete a pre-employment physical examination. This exam ensures that all potential employees meet the necessary health and fitness standards for the role. The examination includes a series of tests and evaluations conducted by a certified medical professional to assess overall physical health, identify any potential medical conditions that could interfere with job performance, and verify that the candidate is capable of safely performing the essential duties of the position. Completion and clearance of this physical are mandatory steps in the hiring process. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email:

Apply now " Installer Electrical Company: REV Group, Inc. Work Hours: Mon-Thu 6a-4:30p, 30 min lunch Additional Locations: REV-O is the manufacturer of two industry-leading ambulance brands that build Type 1, Type 2, Type 3, and medium-duty models: Road Rescue & Wheeled Coach. With a legacy and passion to deliver mission-critical durability, our ambulances are born to perform under the most demanding conditions-and built to be as unbreakable as the spirit of those we serve. Our proud, devoted team takes tremendous pride in the vehicles we build and the first responders who use them every day. REV-O is part of the larger REV Group (NYSE: REVG), a leading manufacturer of specialty vehicles for the fire & emergency and recreation markets. REV Group's extensive vehicle line-up includes models such as ambulances, fire trucks, terminal trucks, RV's and much more. Our 5,000+ employees continuously demonstrate their commitment to building innovative and reliable vehicles that our customers can depend on whether for a family trip across the U.S. or when responding to an emergency. Rev Group is a veteran friendly employer and hires over 200 veterans and or those transferring out of the military each year. Primary Functions: Install and troubleshoot 12V 110V and 3-phase electrical system components. Install aftermarket and OEM vehicle lighting and accessories. Duties and Responsibilities: * Must be able to perform QC repair and rework. * Understand and carry out verbal and written directions in English * Close attention to detail * Function with a minimal amount of supervision or no supervision. * Set work priorities to meet production goals as scheduled per assigned department. * Establish and maintain cooperative working relationships. * Meet minimum standards of safety per assigned department. * Meet minimum standards of housekeeping per assigned department. * Meet all QA and QC standards for each task per assigned department. * Be compliant with all the rules of conduct and attendance per the company handbook. * Ensure that hazardous waste is handled appropriately and placed into the proper container(s). * Maintains all satellite and storage containers in a closed position unless adding or removing waste. * Familiar with Hazardous Waste Contingency Plan. * Knows spill response procedures and evacuation routes. * Other duties and responsibilities as required. Qualifications/Training: * Ability to read, write, comprehend and communicate simple instructions, short correspondence and memos in English. * Must be able to read and interpret engineering drawings, schematics, blue prints, engineering layouts, work orders and change orders. * Ability to read and use linear and other measuring devices including, but not limited to volt meters and test lights. * Ability to troubleshoot and repair electrical system components. * Ability to perform all operations within acceptable quality and time standards. * Ability to effectively present information in one-on-one and small group situations to other employees of the organization. * Fundamental use of various pneumatic and power tools. * Familiar with the safe operation of various tools: including but not limited to drills, screw gun. * Ability to use basic mathematics. * Must have general knowledge of OSHA and EPA standards. * Be trained in Hazardous Materials Handling Operations with an annual refresher course. * Hazardous waste training shall be provided to employee within six months of the date the employee filled this position and a review of this training is provided every 12 months thereafter. Employees shall be supervised until training is complete. This training will consist of at least 30 minutes of classroom instruction and additional training on the job as needed. * Training will include familiarization with roles as outlined in Hazardous Waste Contingency Plan. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to handle, or feel objects, tools or controls; and reach with hands and arms. The employee frequently is required to walk. The employee is occasionally required to stand, climb or balance, stoop, kneel, crouch, or crawl. Other physical requirements include: * Ability to regularly lift and/or move up to 40#'s without assistance. * Ability to work from various squatting, kneeling or bending positions. * Ability to work with arms above head. * Ability to work from ladders or scaffolding. * Ability to stand at a workstation for ten hours a day (minus specified breaks.) * Ability to perform all operations within acceptable quality and time standards. * Ability to safely use specified hand, air, power tools, and machinery. * Ability to operate and understand the operation of all protective safety equipment in the area. * Specific vision abilities required by this job include close vision, peripheral vision and depth perception. * Required to handle and dispose of hazardous waste. * Ability to work in 105-degree heat for excess of ten (10) hours per day. * Ability to work in noisy and dusty conditions. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is frequently exposed to fumes or airborne particles and vibration. The employee is occasionally exposed to toxic or caustic chemicals. The noise level in the work environment is elevated. Education and Experience: * 1 year of experience in automotive electrical installation in a manufacturing environment. Personal Protective Equipment Recommended and/or Required: * Safety glasses. * Earplugs. * Work gloves. Overtime may be required based on business needs. This position may require mandatory overtime up to three (3) out of four (4) Fridays per month. NOTICE FOR CALIFORNIA RESIDENTS Effective January 1, 2020, pursuant to the California Consumer Privacy Act of 2018 (as amended, the "CCPA"), if you are a California resident, you may have certain additional rights. Please click on the link for a description of those rights and how California residents may exercise them.

Controls Installer / Electrician - Orlando, FL - $20-$40/hour (DOE) About the Opportunity A rapidly expanding HVAC & Building Automation services provider is seeking skilled Controls Installers / Electricians throughout Florida. This role offers steady work, strong benefits, and clear advancement opportunities while supporting the installation and wiring of Building Automation Systems (BAS) in commercial, institutional, and mission-critical environments. Position Details Title: Controls Installer / Electrician Location: Orlando, FL Hiring: Entry-Level, Mid-Level, and Senior Installers Pay: $20.00 - $40.00/hour (DOE) Vehicle: Company vehicle or vehicle allowance (depending on role/territory) Key Responsibilities Install, wire, mount, and label BAS panels, controllers, sensors, relays, and field devices Pull, route, and terminate low-voltage control cabling with proper installation practices Assist technicians and programmers during equipment startup and system commissioning Interpret and follow electrical drawings, schematics, and control wiring diagrams Ensure all work follows safety guidelines, electrical codes, and customer site standards Update as-built drawings and document completed installations Ideal Candidate Experience as a Controls Installer, Low-Voltage Electrician, or related field Skilled in conduit work, cable terminations, device mounting, and labeling Knowledge of BAS components such as actuators, sensors, and control panels Ability to use standard test equipment (multimeter, toner/tracer) and hand tools Reliable communicator with strong attention to detail and workmanship Valid driver's license and willingness to travel within Florida What's Offered Competitive pay: $20.00 - $40.00/hour (DOE) Health (4 plan options), Dental, Vision - benefits start after 30 days 401(k): 100% match up to 3%, 50% match on 4-5% Life insurance, disability coverage, and flexible spending accounts Paid vacation and holidays Company vehicle or vehicle allowance (depending on region and role) Career Growth Defined path toward Controls Technician, Programming, and Commissioning roles Opportunities to participate in advanced BAS and smart building projects Training and development geared toward long-term career progression Client Sectors Commercial office facilities and Class A properties K-12 schools, universities, and public-sector buildings Hospitals, clinics, and other mission-critical environments If you're a driven installer or electrician interested in building a long-term career in Building Automation, this Orlando-based opportunity provides strong benefits, growth potential, and steady project work across Florida.

Mortgage Apprentice Reports to: Training Officer & FVP Human Resources Salary: NE18 ($45,000 - $60,000) Paid during training Program Length: 12-18 months then transition into mortgage professional FLSA Status: Non-Exempt | Supervisory Role: No Why Join Us? At Trustco Bank, we're committed to fostering a supportive and inclusive workplace where our employees can grow their careers. We believe that our people are our greatest asset and consider our employees as family. We value each team member's contribution and offer a supportive, collaborative work environment Join Trustco Bank and be part of a dedicated team committed to excellence in mortgage services. Your attention to detail, customer focus, and organizational skills will make a meaningful impact on our clients' homeownership journeys. Apply today and take the next step in your financial services career. We believe that investing in our employees means investing in the future of our company. As a valued team member, you will be eligible for a generous compensation and benefits package that includes: medical, dental and vision insurance, a health savings account with an annual employer contribution, a 401(k)-retirement plan with generous employer match, paid time off plus 11 paid federal holidays, training and professional development programs, tuition reimbursement, reduced fees and rates on certain loan products, and much more! About the Mortgage Apprentice Role At Trustco Bank, we are committed to delivering exceptional service and seamless mortgage experiences. The Mortgage Apprentice participates in a structured training and development program designed to prepare individuals for a career in residential mortgage lending. Apprentices gain hands-on experience, formal training, and mentorship while learning the end-to-end mortgage lending process in a banking environment. Key Responsibilities * Learn residential mortgage products, policies, and procedures * Assist Mortgage Loan Officers with applications and documentation * Collect borrower information and supporting documents * Conduct pre-qualification data gathering under supervision * Maintain loan files and update systems accurately * Provide exceptional customer service to borrowers and referral partners * Participate in Realtor and community outreach events * Adhere to all compliance, fair lending, and bank regulations This job description is not exhaustive; duties and responsibilities may change at any time with or without notice. Training & Licensing * Participate in formal classroom and on-the-job training * Licensing and education costs covered by the Bank (NMLS, Notary, Lending Certificate) Qualifications Required * High school diploma or equivalent * Strong communication and customer service skills * High attention to detail and organizational ability * Proficiency with basic computer applications Preferred * Associate or Bachelor's degree in business, finance, or related field * Sales, banking, or customer service experience * Interest in real estate, mortgage lending, or financial services Compensation & Benefits * Competitive hourly pay during apprenticeship * Eligibility for performance incentives in later program phases * Full benefits package (medical, dental, vision, 401(k), PTO) Career Path Successful completion of the program may result in placement as: * Mortgage Loan Originator * Branch Manager * Residential Lending Specialist Schedule Full-time position; Monday - Friday, 8:30 AM - 5:00 PM Physical Demands: Primarily sedentary role involving standard office activities such as computer work, phone communication, and document handling. Equal Employment Opportunity Statement: Trustco Bank is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, marital status, genetic information, disability, or protected veteran status. This includes, but is not limited to, the following: * Hiring, placement, upgrading, transfer, demotion or promotion * Recruitment, advertising or solicitation for employment * Treatment during employment * Rates of pay or other forms of compensation * Selection for training, including apprenticeship * Layoff or termination It is the policy of Trustco Bank to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity.

Wayfare Energy is currently looking for experienced Electrical Helpers. Electrical Helpers are expected to assist Journeyman and Commercial Electricians with installing a variety of electrical devices at job sites across the Orlando area. Responsibilities include: Measure, cut and bend wire and conduit, using measuring instruments and hand tools. Cut metal components for installation Trace out short circuits in wiring, using test meter Test electrical equipment or systems to ensure proper functioning Strip insulation from wire ends, using wire stripping pliers, and attach wires to terminals for subsequent soldering Drill holes and pull or push wiring through openings, using hand and power tools Perform semi\-skilled and unskilled laboring duties related to the installation, maintenance, and repair of a wide variety of electrical systems and equipment Dig trenches or holes for installation of conduit or supports Maintain tools, vehicles, and equipment and keep parts and supplies in order Organize tools and supplies to be used at the work site according to the instructions of the electrician Requirements Qualified candidates will have: Minimum of 1\-year commercial experience is required Must have experience running MC, bending conduit, installing boxes, lights, outlets, and pulling wire Ability to read blueprints a plus Adhere to all safety policies and procedures Willingness to learn and follow detailed instructions Ability to work in all elements of weather depending on job location Must have all hand tools required for job Valid driver's license required Reliable transportation Authorized to work in the U.S. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"677222313","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Installation"},{"field Label":"Salary","uitype":1,"value":"$13.00 \- $16.00 Hourly"},{"field Label":"Work Experience","uitype":2,"value":"1\-3 years"},{"field Label":"City","uitype":1,"value":"Orlando"},{"field Label":"State\/Province","uitype":1,"value":"Florida"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"32714"}],"header Name":"Electrical Helpers","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00223003","attach Arr":[],"custom Template":"2","is CandidateLoginEnabled":true,"job Id":"**********00321067","FontSize":"16","location":"Orlando","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do","logo Id":"bqezcfb2b7e6a2ae247aa8d28cdeef1996be9"}

Benefits: Health Insurance Allowance Bonus based on performance Paid time off Training & development Job Title: Low Voltage Security Apprentice Company: Spartan Integration Job Description: Spartan Integration is seeking a motivated Low Voltage Security Apprentice to join our team. This is an excellent opportunity for individuals looking to start a career in the security systems industry. You will assist with installing, maintaining, and troubleshooting low voltage systems, including security alarms, CCTV, access control, and fire alarm systems. Responsibilities: Assist with installation, service, and repair of low voltage security systems Perform routine inspections and preventative maintenance under supervision Help troubleshoot and resolve technical issues Work with clients to ensure satisfaction and system functionality Maintain accurate records of work performed Requirements: Willingness to learn and grow in the field Basic knowledge of wiring, cabling, and electronic components (preferred but not required) Ability to read blueprints and technical diagrams (preferred) Strong problem-solving skills Valid drivers license Reliable Vehicle Benefits: Opportunities for advancement Company vehicle (after training period) Paid time off Health and dental insurance allowance Competitive pay How to Apply: Send your resume to *******************************

Job Description DEL-AIR Heating, Air Conditioning, and Refrigeration is a rapidly growing industry leader with seven locations serving Central Florida - Clermont, Davenport, Jacksonville, Melbourne, Sanford (headquarters), Sarasota, and Tampa Primary Responsibilities: Under limited supervision, the electrical helper is responsible for assisting the electrician with maintaining electrical systems in residential and commercial buildings. Specific Duties & Tasks: Assists with installing, maintaining, and repairing electrical control, wiring, and lighting systems. Reviews electrical blueprints to identify wiring circuits. Inspects electrical components including transformers and circuit breakers. Coordinates with team members to install light fixtures and other items. Uses a variety of industry-specific tools to perform their tasks, including ammeters, voltmeters, thermal scanners, and cable testers. Able to identify wires accurately, with the assistance of the electrician. Maintain a clean and organized job site. Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace. Responsible for special projects as requested by management and other duties/ responsibilities as assigned to meet the ongoing needs of the organization. Ensure compliance with all Del-Air policies and procedures Qualifications: At least 1 year of experience electrical service and troubleshooting, preferred. Basic knowledge in the use of hand and power tools used in the trade, preferred. Basic knowledge of building codes, safety regulations, and safety practices. Effective oral communication and interpersonal skills. Attention to detail and ability to perform multiple tasks simultaneously. Available to work overtime hours. Valid driver's license and ability to meet FCCI auto guidelines to operate a company-owned vehicle. Eligible to legally work in the United States. Be at least 18 years of age. Successfully complete a background check and drug screen. Benefits offered by Del-Air: Opportunities for career growth and advancement Competitive wages Company Paid Life Insurance Company Paid Telehealth Program - MDLIVE Medical, Dental, and Vision Plans Supplemental Benefit Plans (Disability, Accident, Critical Illness, etc.) Paid time off (PTO) / Paid holidays 401K Retirement Plan - Match Corporate Wellness & Safety Programs Referral Incentives And more…. We are accepting applications by replying to this job posting. Please submit a resume or detailed description of the job history to be considered for the position. We are an Equal Opportunity Employer and a Drug-Free Work Place Military Friendly Employer

Job Description Pay Rate: $28 - $32 per hour About RANDALL RANDALL is a leading self-performing subcontractor serving Florida and the Southeast. A family-owned company, RANDALL has deep roots in the community and is perfectly positioned as an innovator in the industry. With over 600 employees and 35+ years in operation, RANDALL is an established, reliable, and trusted partner. RANDALL's services and products are delivered through our 100,000 sq. ft. fabrication facility, set on 25 acres in Central Florida. Randall Fire Protection is seeking a skilled and detail-oriented Commercial Electrician with Low Voltage Controls experience to install, maintain, and repair fire alarm systems and control systems and related equipment on project throughout Central Florida. Position Summary The technician will ensure that all systems are functional, compliant with codes, and meet safety standards. This role requires experience in installing electrical conduit, wiring (Rough In) and understanding low voltage installation for fire alarm systems and controls (HVAC), excellent troubleshooting skills, and a commitment to maintaining the safety of occupants and property. Essential Functions Installation of electrical conduits (EMT, FLEX, MC, RIGID,) Bending EMT Conduit, Installation of junction boxes, unistruts, conduit hangers and all related tasks for Rough In and pulling wires. Installation of enclosure, panel boxes/cabinets, raceways, etc. Read and interpret blueprints, schematics, and technical manuals. Maintain accurate records of work performed, assessment information (panels and devices brands and models). Collaborate with contractors, electricians, and building officials during installations or renovations. Ensure compliance with local, state, and federal fire safety regulations Installation of field devices for fire alarm and building automation systems related components (e.g., smoke detectors, pull stations, control panels, signaling devices, relays). Diagnose system malfunctions and perform necessary repairs or upgrades. Be able to identify preventive maintenance and service. Read and interpret blueprints, schematics, and technical manuals. Maintain accurate records of work performed, assessment information (panels and devices brands and models). Collaborate with contractors, electricians, and building officials during installations or renovations. Ensure compliance with local, state, and federal fire safety regulations. Desired Qualification Requirements High school diploma or equivalent. Fully fluent in English. (Speaking, Writing, Reading) Minimum 3 years (or formal education equivalent) of electrical experience (120v), installation (Rough in, Conduit installation (Bending EMT), Wiring). Strong troubleshooting and problem-solving skills. Controls installation and troubleshooting is a plus. Fire alarm installation and troubleshooting is a plus. Own and safely use hand and power tools and electrical tools (e.g. Drill, Impact, Multimeter, Hi/Low Voltage Detector, etc.) Valid driver's license with a clean driving record. Good communication and customer service skills. You will be the face and voice of the company when working in the field. Ability to work independently with minimal supervision and manage multiple tasks on the job site. OSHA 10 / 30 Certification (Is a plus, not required) Physical Requirements This is primarily a field or jobsite job. You must be able to lift a dead weight of at least 50 pounds and stand on your feet for several hours at a time. You must also be able to bend, stretch, crouch, and lift as required by the job, be able to respond quickly to sounds, see and respond to dangerous situations, and properly wear personal protective gear. Benefits Our selection will be driven by the qualifications above as well as the ability to develop relationships with clients and co-workers to maximize your professional opportunities. Benefits We seek dynamic individuals who are ignited by challenge and opportunity for personal and professional growth. Are you ready to take the next step in your career? We have long-term opportunities for hard-working people who want to join a winning team. RANDALL offers competitive compensation, health benefits, insurance, matching 401(k), and paid time off. We look forward to reviewing your resume! Randall is a drug free workplace. #RandallHiringNow Randall does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies without pre-approval from Randall's Recruiting team. Pre-approval is required before any external candidate can be submitted. Randall will not be responsible for fees related to unsolicited resumes and for candidates who are sent directly to our hiring managers or any other management / staff (bypassing Recruitment staff).

Job DescriptionDescription: The Apprentice level Light Industrial Controls Electrician supports Journeyman and experienced Controls Technicians and Engineers in the installation, maintenance, and repair of electrical systems across commercial and industrial job sites. The work is in a variety of environments and build the foundational skills needed to advance toward journeyman-level certification. This is a full-time, hourly position that may include and require frequent travel (up to 90%). All candidate employment will be contingent upon: Passing a pre-employment drug screen and background check, including a 10-year FBI background check. Authorization to work in the United States now and in the future without visa sponsorship. PWC's Apprentice Electrician Key Responsibilities: Assist with the installation, modification, and maintenance of electrical systems under the direction of licensed electricians. Support job site organization and cleanup following the completion of tasks. Help with material handling and equipment setup. Pull wire, bend conduit (EMT, RMC, PVC, etc.), and assist with manual excavation as needed. Operate hand tools and basic power tools safely and efficiently. Learn to read and interpret basic electrical drawings and blueprints. Observe and follow all applicable safety procedures and codes. Work closely with Journeymen and Project Leads to learn proper methods and practices. Maintain tools and equipment in good working condition. Demonstrate professionalism and excellent customer service on job sites. Requirements: Required qualifications: High school diploma or GED 0-2 years of experience in electrical work or related field Interest in pursuing a career in the electrical trade Basic understanding of electrical safety practices Willingness to learn and follow instructions Physically capable of: Lifting up to 50 lbs. regularly Working in confined spaces and overhead Standing, bending, kneeling, and climbing ladders for extended periods Working in environments with hot or cold temperatures Ability to work at heights and use lifts, ladders, and stairs safely Reliable transportation and punctuality Preferred qualifications: Enrolled in or interest in enrolling in an apprenticeship or trade school program Bilingual, especially English/Spanish Prior exposure to electrical work in commercial, airport, or industrial settings Familiarity with basic tools such as drills, pliers, screwdrivers, and multimeters OSHA 10 certification (or willingness to complete upon hire)

We are seeking a motivated and detail-oriented Electrician Assistant to join our team. The ideal candidate will support licensed electricians in various tasks related to electrical installations and repairs. This role is essential for ensuring that projects are completed safely and efficiently on construction sites. The Electrician Assistant will gain hands-on experience while working alongside skilled professionals in both commercial and industrial settings. Key Responsibilities: Assist with electrical installations and maintenance Follow safety protocols and regulations on job sites Collaborate with team members to ensure project success Install and repair electrical equipment and fixtures Install various types of raceways and cable tray systems You will work in all phases of underground construction including but not limited to: Loading, driving, digging, trenching installing conduit, and pulling wire Adhere to all safety codes Perform daily inspections of vehicles and equipment You will hand dig using a shovel and/or mechanical tools Organized, reliable, and a good attitude Duties Assist electricians in installing, maintaining, and repairing electrical systems and equipment. Read and interpret blueprints and schematics to understand project requirements. Help in the setup of power tools and other equipment necessary for electrical work. Maintain a clean and organized work environment on sites. Follow safety protocols to ensure a safe working environment for all team members. Experience 2 + years of experience or familiarity with electrical work in the electrical field is preferred. Knowledge of commercial or industrial electrical systems is a plus. Experience using power tools and testing equipment such as voltmeters and ohmmeters is beneficial. Understanding of basic construction site practices and safety measures. Strong attention to detail, reliability, and a willingness to learn from experienced electricians. Requirements: High School diploma or GED required; technical training or electrical apprenticeship preferred Must have a valid driver's license Availability for overtime and weekend shifts Strong work ethic and attention to detail Ability to lift up to 100 lbs. Able to work in outdoor environments in various and possibly extreme weather conditions. Able to climb, stoop, kneel, squat. Maintain truck in orderly fashion. Ability to travel on a weekly basis is a requirement. Must be willing to work long hours when needed to facilitate completion of emergency power outages. Capability to perform physically demanding tasks including, bending, standing, and carrying objects for long periods of time. Trenching, digging, and working in confined spaces. Work schedule Overtime Monday to Friday Weekend availability Benefits Paid time off Health insurance Dental insurance Vision insurance Life insurance Disability insurance 401(k) matching Referral program Paid training Profit sharing

Insight Global is looking for 2 electrical installers to come in support one of its top clients in the greater Orlando area. These individuals will be supporting a massive project within the clients portfolio. They will be responsible for installations and maintaining/wiring components. They will also be responsible for inspecting/installing sensors to make sure everything they are operating on is running smoothly. Experience working with power tools and hand tools is a must for this person to be successful in this role and stay long term. We are a company committed to creating inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity employer that believes everyone matters. Qualified candidates will receive consideration for employment opportunities without regard to race, religion, sex, age, marital status, national origin, sexual orientation, citizenship status, disability, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to Human Resources Request Form (****************************************** Og4IQS1J6dRiMo) . The EEOC "Know Your Rights" Poster is available here (*********************************************************************************************** . To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: *************************************************** . Skills and Requirements - bending pipe - pulling wires - installation of sensors - low voltage wiring (50v or less) - must be comfortable riding own vehicle - power tools exp

We are looking for highly motivated and extremely dedicated Electrical installers. We give immediate openings to those who have at least 1 year of experience installing Electrical systems and can provide their own tools. We want all employees at M1 to feel comfortable working with us for years to come. That's why we offer several benefits such as: Paid Time off Paid Holidays Company Vehicle w/Gas Card Piece Rate Medical, Dental & Vision Insurance for You and Your loved ones (Offered First Day of Hire) Company Uniform Work/Life Balance (Family Takes Priority) Excellent HR support (Always open for help) Year-round work with weekly pay Continuous coaching and plenty of growth Mechanical One will take care of you and aid in where you might need further training . We want our installations to represent the value of our company and that we strive for EXCELLENCE. We try to stand out and be different from any other standard electrical company in Florida. Our electrical installers are accountable for: Installation in residential new construction homes. Reading blueprints, laying out the house, boxing out the house, pulling wire. Maintain quality and safety standards on all installations and tasks. Must have a general knowledge of electrical equipment and the ability to troubleshoot and repair all issues that may arise during an install. Communicate effectively with the builder and your supervisors the process of each installation. Inform and educate all personnel on newly installed equipment. Ensure that the company vehicle is kept cleaned and well maintained. All other duties as assigned by supervisor. Requirements Must have 1 year of electrical residential new construction installer experience. Must have a Valid Driver's License and clean MVR report. Must be able to pass drug screen and background check. Must possess the ability to own and use power tools to effectively execute jobs. Frequently lift and move objects over 50 pounds. Ability to ascend and descend ladders per OSHA guidelines. Ability to wear company approved personal protection equipment per local, state, federal or OSHA regulations. This job operates in a construction site environment and may be outside in heat/cold, wet/humid, and dry/arid conditions or inside conditions. Must complete tasks, as assigned, within the company's standard timeframe. Salary Description Piece Rate

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: Paid Time Off & Holidays 401(k) with employer match Medical/Dental/Vision insurance Health Savings Account (HSA) and Flexible Spending Account (FSA) HSA employer contribution Life and Disability insurance Wellness Program (participation incentives) Employee Assistance Program Competitive pay Career development Opportunity for sign on bonus How do you excel in this position You should be able to inspect and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices, and computer software. What are we looking for Minimum one (1) year of experience with electrical installations High School Diploma or equivalent Conduit Installation to 1" Understand mechanical drawings and control schematics Installation of low voltage HVAC, Access and Fire Alarm systems Must be authorized to work in US Must have a valid Driver's License Government badge will be required for most sites, must be prepared to pass an extensive background check Additional skills preferred but not required Associated degree or one to two (1-2) years of Vocational Technical Training Building Automation Systems experience Working with us Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. Job Posted by ApplicantPro

We are seeking a Industrial Maintenance Electrician Technician (FIRST SHIFT) to join our team! You will be responsible for installing, troubleshooting, repairing, performing routine maintenance, fixing any faulty wiring, and maintaining production and facility equipment. Work is performed in a production environment which requires exposure to all temperature changes, high noise levels, working around moving equipment, vibrations, dust, etc. Working hours will be a set schedule but must be flexible with working extended hours when required. Responsibilities: Inspect on a routine basis electrical equipment wiring, fixtures, and other components to ensure they remain functional and are up to code, as well as to identify any hazards or issues. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Perform routine preventative maintenance on machines, equipment, and plant facilities. Respond to work order requests in a timely fashion by analyzing test results, machine error messages, and information obtained from operators to diagnose equipment problems. Diagnose problems, replace or repair parts, test and make adjustments. This includes recording parts and materials used. Perform mechanical skills including and not limited to PLC, pneumatic, hydraulic, troubleshooting and repair of production machines. Read and interpret equipment manuals and work orders to perform required maintenance and service. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties. Detect faulty operations, defective material, and report those and any unusual situations to proper supervision. Ensure the safety needs are given a to priority in operations support and work execution. Some examples are Confined Space Entry, LOTO, Hand Tool Safety Use, etc. Qualifications: High school diploma or equivalent, or AA degree in mechanical, electrical or industrial maintenance preferred. 3+ years of manufacturing experience, strong hydraulic, pneumatic, mechanical and industrial skills with PLC experience AC Motors, Electrical Panels, Power Distribution, and VFD's experience preferred. Experience with Industrial Manufacturing, injection molding, industrial tools, and equipment. Ability to handle physical workload. Must read and understand schematics, drawings and diagrams. Must be dependable, punctual and have a good attendance record. Ability to understand and communicate instructions in English.

Job Description DEL-AIR Heating, Air Conditioning, and Refrigeration, Inc. is a growing industry leader with seven locations serving Central Florida - Clermont, Davenport, Tampa, Jacksonville, Melbourne, Sanford (headquarters), and Sarasota. Primary Responsibilities: Remove, replace, and start-up air conditioning and heating equipment by performing various tasks to A/C units in residential homes. Specific Duties & Tasks: Interact with Retail Salesperson on abnormal circumstances for the job Communicate with a customer in-person, the job to be performed prior to starting Perform walk-through inspection of the job site and consult work order requirements Remove and replace all equipment while protecting the customer's property Perform minor carpentry work (moldings, platforms, doors, attic access, etc.) Install, modify, or repair air ducts, indoor units, and outdoor units Braze and solder various metals to connect piping Disassemble indoor or outdoor units and replace defective parts Maintain the required tool list for the position Maintain cleanliness and fuel levels of company vehicles during their off-duty time Electrical work to code when required Collect cash or check payments from customers when required Maintain a clean and neat personal appearance Other duties may be assigned Qualifications: At least one year of experience relating to HVAC residential installation preferred. EPA certification required; Universal type preferred Eligible to legally work in the United States Ability to obtain a valid driver's license. Be at least 18 years of age. Applicable military experience will be considered. Successfully complete a background check and drug screen. Ability to thrive in a team environment. Benefits offered by Del-Air: Opportunities for career growth and advancement Competitive wages Company Paid Life Insurance Company Paid Telehealth Program - MDLIVE Medical, Dental, and Vision Plans Supplemental Benefit Plans (Disability, Accident, Critical Illness, etc.) Paid time off (PTO) / Paid holidays 401K Retirement Plan - Match Corporate Wellness & Safety Programs Referral Incentives And more… We are accepting applications by replying to this job posting. Please submit a resume or detailed description of the job history to be considered for the position. We are an Equal Opportunity Employer and a Drug-Free Work Place Military Friendly Employer

Job DescriptionDescription: Precision Wire & Control (PWC) is seeking a highly skilled and versatile Journeyman level Light Industrial Electrician to join our team. This position is responsible for the safe and effective installation, maintenance, troubleshooting, repair, and remodeling of electrical systems across a variety of environments. The ideal candidate will possess advanced hands-on skills in commercial and industrial electrical construction and will perform the foundational electrical work required before systems and handed off the Electrical Controls or Industrial Automation Technicians. PWC's Light Industrial Electrician is hourly paid and full-time regular work eventually requiring frequent travel (up to 90%). First, candidates will live within commuting distance to Hartsfield-Jackson Atlanta International Airport. All candidate employment will be contingent upon: Passing a preemployment drug screen, background check, and pass a 10-year FBI background check. Authorization to work in the United States now and in the future without visa sponsorship. What PWC's Light Industrial Electrician will do: Install, modify, and maintain electrical systems and components in new construction and existing facilities. Support project cleanup and restoration efforts following electrical work completion. This daily key responsibility must be done efficiently. Perform layout and planning of electrical systems according to drawings, blueprints, and electrical code specifications. Troubleshoot electrical malfunctions using appropriate test equipment and diagnostic techniques. Execute repairs including replacing faulty wiring, circuit breakers, switches, lighting, and other components. Prepare electrical systems for industrial automation and control integration. Perform demolition of electrical infrastructure safely. Operate power tools and heavy equipment as needed. Pull wire, bend conduit (EMT, RMC, PVC, etc.) and perform manual excavation where required. Read and interpret electrical and construction drawings. Ensure compliance with all applicable safety and electrical codes. Coordinate work with other trades and project managers to ensure timely and efficient job progress. All candidates will be expected to perform duties with great customer service and care Initial work will be at Hartsfield-Jackson Atlanta International Airport. Candidates must be able to commute to work. PWC will not pay relocation to live near the airport. Requirements: Required qualifications: High school diploma or GED Minimum of four (4) years' experience in electrical construction. Proficient in the use of electrical tools, testing equipment, and materials. Have standard set of electrical tools including but not limited to drill, impact, diagonal pliers, screwdriver complete set, Linesman pliers, needle nose, chanel locks, meters and testing equipment. Strong understanding of the National Electrical Code (NEC). Good communication skills OSHA 10 Training minimum Capable of working in a physically demanding environment including: Lifting up to 50 lbs. on a consistent basis Working overhead and in confined spaces Standing, bending, and kneeling for extended periods of time Must be able to work environments with sometimes almost extreme temperatures of hot and cold Safely Working at elevations, using ladders, lifts and stairs. Preferred qualifications: Bilingual, especially being able to speak English and Spanish Experience working in airports, theme parks, and other large commercial structures Familiarity with fire alarm and security systems Familiarity with electrical work involving programmable logic controls (PLCs) Electrical or engineering education

We are seeking a Industrial Maintenance Electrician Technician (FIRST SHIFT) to join our team! You will be responsible for installing, troubleshooting, repairing, performing routine maintenance, fixing any faulty wiring, and maintaining production and facility equipment. Work is performed in a production environment which requires exposure to all temperature changes, high noise levels, working around moving equipment, vibrations, dust, etc. Working hours will be a set schedule but must be flexible with working extended hours when required. Responsibilities: Inspect on a routine basis electrical equipment wiring, fixtures, and other components to ensure they remain functional and are up to code, as well as to identify any hazards or issues. Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service. Perform routine preventative maintenance on machines, equipment, and plant facilities. Respond to work order requests in a timely fashion by analyzing test results, machine error messages, and information obtained from operators to diagnose equipment problems. Diagnose problems, replace or repair parts, test and make adjustments. This includes recording parts and materials used. Perform mechanical skills including and not limited to PLC, pneumatic, hydraulic, troubleshooting and repair of production machines. Read and interpret equipment manuals and work orders to perform required maintenance and service. Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties. Detect faulty operations, defective material, and report those and any unusual situations to proper supervision. Ensure the safety needs are given a to priority in operations support and work execution. Some examples are Confined Space Entry, LOTO, Hand Tool Safety Use, etc. Qualifications: High school diploma or equivalent, or AA degree in mechanical, electrical or industrial maintenance preferred. 3+ years of manufacturing experience, strong hydraulic, pneumatic, mechanical and industrial skills with PLC experience AC Motors, Electrical Panels, Power Distribution, and VFD's experience preferred. Experience with Industrial Manufacturing, injection molding, industrial tools, and equipment. Ability to handle physical workload. Must read and understand schematics, drawings and diagrams. Must be dependable, punctual and have a good attendance record. Ability to understand and communicate instructions in English.

Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: Paid Time Off & Holidays 401(k) with employer match Medical/Dental/Vision insurance Health Savings Account (HSA) and Flexible Spending Account (FSA) HSA employer contribution Life and Disability insurance Wellness Program (participation incentives) Employee Assistance Program Competitive pay Career development Opportunity for sign on bonus How do you excel in this position You should be able to inspect and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices, and computer software. What are we looking for Minimum one (1) year of experience with electrical installations High School Diploma or equivalent Conduit Installation to 1" Understand mechanical drawings and control schematics Installation of low voltage HVAC, Access and Fire Alarm systems Must be authorized to work in US Must have a valid Driver's License Government badge will be required for most sites, must be prepared to pass an extensive background check Additional skills preferred but not required Associated degree or one to two (1-2) years of Vocational Technical Training Building Automation Systems experience Working with us Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us.

Precision Wire & Control (PWC) is seeking a highly skilled and versatile Journeyman level Light Industrial Electrician to join our team. This position is responsible for the safe and effective installation, maintenance, troubleshooting, repair, and remodeling of electrical systems across a variety of environments. The ideal candidate will possess advanced hands-on skills in commercial and industrial electrical construction and will perform the foundational electrical work required before systems and handed off the Electrical Controls or Industrial Automation Technicians. PWC's Light Industrial Electrician is hourly paid and full-time regular work eventually requiring frequent travel (up to 90%). First, candidates will live within commuting distance to Hartsfield-Jackson Atlanta International Airport. All candidate employment will be contingent upon: Passing a preemployment drug screen, background check, and pass a 10-year FBI background check. Authorization to work in the United States now and in the future without visa sponsorship. What PWC's Light Industrial Electrician will do: Install, modify, and maintain electrical systems and components in new construction and existing facilities. Support project cleanup and restoration efforts following electrical work completion. This daily key responsibility must be done efficiently. Perform layout and planning of electrical systems according to drawings, blueprints, and electrical code specifications. Troubleshoot electrical malfunctions using appropriate test equipment and diagnostic techniques. Execute repairs including replacing faulty wiring, circuit breakers, switches, lighting, and other components. Prepare electrical systems for industrial automation and control integration. Perform demolition of electrical infrastructure safely. Operate power tools and heavy equipment as needed. Pull wire, bend conduit (EMT, RMC, PVC, etc.) and perform manual excavation where required. Read and interpret electrical and construction drawings. Ensure compliance with all applicable safety and electrical codes. Coordinate work with other trades and project managers to ensure timely and efficient job progress. All candidates will be expected to perform duties with great customer service and care Initial work will be at Hartsfield-Jackson Atlanta International Airport. Candidates must be able to commute to work. PWC will not pay relocation to live near the airport. Requirements Required qualifications: High school diploma or GED Minimum of four (4) years' experience in electrical construction. Proficient in the use of electrical tools, testing equipment, and materials. Have standard set of electrical tools including but not limited to drill, impact, diagonal pliers, screwdriver complete set, Linesman pliers, needle nose, chanel locks, meters and testing equipment. Strong understanding of the National Electrical Code (NEC). Good communication skills OSHA 10 Training minimum Capable of working in a physically demanding environment including: Lifting up to 50 lbs. on a consistent basis Working overhead and in confined spaces Standing, bending, and kneeling for extended periods of time Must be able to work environments with sometimes almost extreme temperatures of hot and cold Safely Working at elevations, using ladders, lifts and stairs. Preferred qualifications: Bilingual, especially being able to speak English and Spanish Experience working in airports, theme parks, and other large commercial structures Familiarity with fire alarm and security systems Familiarity with electrical work involving programmable logic controls (PLCs) Electrical or engineering education