Laboratory technician jobs in Berlin, CT

The Lab Assistant Student Worker provides administrative and clerical support to the associates of the Biology Department at Post University. This position requires approximately 10 hours per week. Supervisor: Xiangru Xu, Program Chair of Life and Physical Science Rate of Pay: Minimum Wage This is a 2025-2026 academic year-round opportunity. Essential Duties and Responsibilities The primary responsibility of the Lab Assistant is to assist with the daily operations of the Post University Biology Department which include, but arenot limited to: Assist Faculty in the set up and preparation of materials for biology, chemistry, physics, and environmental science labs both in the laboratories and field. Clean up laboratory, laboratory equipment, and glassware. Other duties as assigned. Minimum Skills, Training, and Attributes Student must have successfully completed at least one high school lab course PLUS be currently enrolled in a college lab course; ideally, student shall have successfully completed at least one college lab course Students must be responsible and able to focus on the task at hand Student must be comfortable working with laboratory glassware and general lab equipment Student must communicate and coordinate with supervisor, multiple instructors, and other student lab assistants Ideally, student should be a Biology major or minor. How This Position Will Benefit You as a Student This position will give a student an opportunity to work behind the scenes and better understand laboratory setup, equipment setup, equipment use, and proper laboratory etiquette and procedures. Students working for the Science department will set up laboratory and field experiments and gain comfort in a laboratory or field setting. This opportunity is open to Post University students only #LI-DNI

The Department of Plant Science and Landscape Architecture, a part of the College of Agriculture, Health and Natural Resources, within the University of Connecticut, Storrs Campus, seeks qualified applicants for the full-time position of Plant Science Research and Education Facility Turfgrass Research Technician (Laboratory Technician 1). Supervised by the Plant Science Research and Education Facility Manager and the Department Head, this position provides technical assistance to faculty and researchers in establishing and maintaining turfgrass for research, teaching, and outreach. Duties also include maintenance and repair of equipment associated with field and greenhouse projects as well as pesticide applications. DUTIES AND RESPONSIBILITIES Establish, maintain, and renovate turfgrass areas for research, teaching, and outreach activities. Prioritize cultural management of turfgrass research plots in consultation with researchers and farm manager. This includes mowing, irrigating, fertilizing, cultivating, and pest scouting. Prepare and apply pesticides as needed to manage weeds, insects, and diseases of turfgrasses in research fields and greenhouses. Identify turfgrass species and diagnose common weed, insect, and disease problems. Operate equipment, instrumentation, and related components including computer software and systems. Assist in maintaining, diagnosing, and repairing gas powered equipment. Calibrate field equipment to ensure accurate application of fertilizers and pesticides. Responsible for the operation, maintenance, and repair of high-volume, in-ground irrigation system, and satellite controllers. Collect, compile, and distribute climate, soil conditions, and other data to researchers to inform experimental activity and turfgrass health management decisions. Assist with field laboratory procedures as needed, including establishing research trials, applying treatments, soil sampling, plant tissue harvest, and collecting quantitative and qualitative data to support faculty research. Maintain appropriate digital records and files related to the maintenance of research plot and pesticide applications. Conduct basic maintenance and repair skills for small-engines, specialized turfgrass, and landscape equipment including the precision adjustment and grinding of reel-mowers for fine-cut turfgrass. Assist faculty and researchers with teaching and outreach initiatives by preparing plant specimens, developing and presenting turfgrass instructional content for undergraduate and professional audiences, and providing logistical support for planning and delivering outreach events such as the UConn Turfgrass Field Day, the New England Regional Turfgrass Conference, and other programs. Provide supervision of hourly labor, students, and other support positions associated with the Turfgrass Science Program. Other related duties. The selected incumbent is expected to display the following: Effective communication and conflict resolution skills. Self-motivation and ability to work independently with minimal supervision. Ability to prioritize duties and manage time effectively. Flexibility and willingness to work irregular schedules, including evenings and weekends. Willingness to work outdoors in various weather conditions. Problem-solving ability and adaptability in dynamic work environments. Demonstrated interest in promoting the UConn Turfgrass Science Program and commitment to ongoing professional development through continuing education. MINIMUM QUALIFICATIONS Bachelor's degree in turfgrass science, plant science, or a related field with at least one year of relevant experience; OR Associate's degree with three or more years of experience; OR five or more years of experience in a related field. Knowledge and experience in growing and maintaining high-quality turfgrass areas such as sports fields, golf courses, or residential and commercial properties, or field research plots. Experience in Integrated Pest Management for control of turfgrass pests. Experience identifying turfgrass species and diagnose common weed, insect, and disease problems. Demonstrated experience with calibration, application, maintenance, and repair of sprayers and broadcast spreaders, and with computers and electronic record keeping. Current Connecticut Governmental Commercial Junior Operator Certification pesticide license or ability to acquire Certification within one month of hire. PREFERRED QUALIFICATIONS Experience operating and repairing high-volume in-ground irrigation systems. Experience using instruments such as TDR probes or visual symptoms to scout turf for moisture stress or disease, weed, and insect incidence. Experience with specialized turfgrass equipment operation and maintenance including reel-mowers and reel grinding equipment. Supervisory or leadership experience. APPOINTMENT TERMS This is a full-time, twelve-month UCPEA staff position, and is designated as an ad-hoc emergency support services/essential position. As such, the candidate must be willing and able to work during closures/delayed openings due to inclement weather or for significant events that affect campus operations. The standard workweek for this role is 35 hours, 7 hours per day (8:00 AM to 3:30 PM), Monday through Friday. However, this schedule may change to meet operational and staffing needs. This position is located at the Plant Science Research and Education Facility near the main University of Connecticut campus in Storrs, CT. The University offers a competitive salary, and outstanding benefits, including employee and dependent tuition waivers at UConn, and a highly desirable work environment. For additional information regarding benefits visit: https://hr.uconn.edu/health-benefits/. Other rights, terms, and conditions of employment are contained in the collective bargaining agreement between the University of Connecticut and the University of Connecticut Professional Employees Association (UCPEA). TERMS AND CONDITIONS OF EMPLOYMENT Employment is contingent upon the successful completion of a pre-employment criminal background check and physical examination. TO APPLY Please apply online at https://hr.uconn.edu/jobs, under Staff Positions, search #499332 to upload a resume, cover letter, and contact information for three (3) professional references. Evaluations of applications will begin immediately, and the position will remain open until filled. Preference will be given to applications received by February 6, 2026. All employees are subject to adherence to the State Code of Ethics which may be found at http://www.ct.gov/ethics/site/default.asp. All members of the University of Connecticut are expected to exhibit appreciation of, and contribute to, an inclusive, respectful, and diverse environment for the University community. The University of Connecticut aspires to create a community built on collaboration and belonging and has actively sought to create an inclusive culture within the workforce. The success of the University is dependent on the willingness of our diverse employee and student populations to share their rich perspectives and backgrounds in a respectful manner. This makes it essential for each member of our community to feel secure and welcomed and to thoroughly understand and believe that their ideas are respected by all. We strongly respect each individual employee's unique experiences and perspectives and encourage all members of the community to do the same. All applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. The University of Connecticut is an AA/EEO Employer.

**_About_** **_this_** **_position_** At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil , 'all , Loctite , Snuggle , and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow. This position is with our Adhesive Technologies business unit - where we empower our people to transform industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. **Dare to learn new skills, advance in your career and make an impact at Henkel.** **What you'll do** As an Adhesives Innovation Lab intern for our brand Loctite, you will: + Get hands-on experience in a state-of-the-art lab setting + Learn and apply technical engineering skills/principles and be exposed to a wide variety of markets/applications + Work independently and as a team member on challenging lab projects + Provide technical support, perform research, collect data and report on adhesive and dispensing equipment performance in manufacturing processes and environments + Troubleshoot, perform failure analysis and research competing products and equipment + Technical liaison with our customers, sales, marketing, manufacturing, and R&D + Assist in the sales process by providing technical training, engineering support and identify new product development opportunities **What makes you a good fit** + A rising junior or rising senior graduating in 2027 or 2028 pursuing a degree in Mechanical Engineering, Chemical Engineering, Computer Science / Engineering or Material Science + Knowledge of lab best practices and safety protocols + Familiarity with design of experiments and scientific methods + CAD experience is a plus + Programming skills are a plus (Python preferred) **Some benefits of joining Henkel as an intern** + Exciting projects that allow you to make real impact and collaborate with Henkel colleagues worldwide. + Countless learning opportunities available through Henkel's online learning platform with over 9,000 professional courses. + Networking events with Henkel business leaders, experts and sustainability ambassadors. + Ongoing feedback discussions throughout the internship that allow you to accomplish concrete goals. + In-person and virtual social events to connect with other Henkel interns across the country. **Following your internship, you may be invited to join Henkel as a returning intern or full-time employee. ** **Additional information** + This internship is eligible for a housing stipend or relocation support. + Henkel's Summer 2026 internship program starts on May 27th, 2026, and runs through mid-August. + Recruitment for our 2026 internships starts in late August 2025 and runs through early March 2026 or until all our positions are filled. + If selected to move forward in our recruitment process, you will receive an email from our talent acquisition team. + If a position you applied to is filled by another candidate, you will receive an email from our team alerting you that the position is closed. The salary for this role is $22-$27/hour. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. **JOB ID:** req75393 **Job Locations:** United States, CT, Rocky Hill, CT **Contact information for application-related questions:** ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. **Application Deadline:** As long as the vacancy is listed on our Career Site, we are happy to receive your application **Job-Center:** If you have an application already, you can create or log in to your accounthere (******************************************************************************************************************************************************** to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. **Accept for all YouTube content** Deactivate loading external content from YouTube. How is work at Henkel

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description 1. Assist in the mechanical evaluation of new and existing products. 2. Evaluate test data and report results. 3. Prepare and operate various lab equipment such as Instrons and needle testing equipment 3rd shift position; pays $19.50 Qualifications B.S. in Mechanical or Biomedical Engineering field or equivalent years of related work experience. -Previous Test Lab experience -Proven Leadership experience -Excellent problem solving skills -Strong communication skills, both written and verbal -Ability to multi-task -Ability to work in fast paced and sometimes stressful environment -Mechanical and Mathematical aptitude -Experience with use of Microsoft Word, Excel Additional Information If you are interested and want to apply, Please contact: Sagar Rathore ************ ******************************

Medical Solutions is seeking a travel Cath Lab Technologist for a travel job in Bridgeport, Connecticut. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Duration: 13 weeks 40 hours per week Shift: 10 hours, days Employment Type: Travel We're seeking talented healthcare professionals whose adventure game is as strong as their clinical game. Those that want flexibility and high pay, we have the positions for you! Some of the industry-leading benefits enjoyed by Medical Solutions travel nurses and travel allied healthcare professionals include: Day One Medical, Dental, and Vision with low premiums Day One 401(k) with Company Contribution Personalized Compensation Packages Paid, Private, Fully Furnished, Pet-Friendly Housing Dedicated Recruiter and 24/7 Customer Care Line Per Diem Allowance and Paid Travel Licensure and Certification Reimbursement Free Liability Coverage Voluntary Benefits: Critical Illness, Hospital Indemnity, Accident, and Pet Insurance Equal Employment Opportunity And More! Estimated pay package based on bill rate at time job was posted. Bill rates can change frequently and without notice. Exact pay package may vary based on guaranteed hours, distance being traveled, and customizations available for travelers. Private Job Medical Solutions Job ID #1010500. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cardio OR (Cardiovascular Operating Room) About Medical Solutions At Medical Solutions, we're people who care, helping people who care. No matter how you look at it, there's a whole lot of care going on in our world and that's just the way we like it. What do we do? Medical Solutions is one of the nation's largest providers of total workforce solutions in the healthcare industry, connecting nurses and allied health clinicians with hospitals and healthcare systems across the country and around the corner. Through our family of brands, we also serve a segment of clients outside of the healthcare space. And we're the very best at what we do. You'll love our culture that's filled with heart and soul. As a company and employer, we're sincerely and unabashedly us. We lead as humans first and believe the unique qualities of each team member make us better together. We share a purpose for helping others and the drive to make a difference. And we offer endless opportunities for personal and professional growth, throughout your career. At Medical Solutions, you'll find a great place to work and a career home. We've received Best Places to Work awards, landed top industry awards, and received accolades for the impact we've made in business and within our community. But the only way to really get to know us, is to join us. We think you'll fit right in. Benefits Weekly pay Holiday Pay Guaranteed Hours Continuing Education 401k retirement plan Pet insurance Company provided housing options Cancelation protection Wellness and fitness programs Mileage reimbursement Referral bonus Employee assistance programs Medical benefits Dental benefits Vision benefits Benefits start day 1 License and certification reimbursement Life insurance Discount program

EP Tech / EP Lab Tech Location: Bridgeport, CT Agency: Nationwide Therapy Group Pay: $2,818 per week Shift Information: 5 days x 8 hours Contract Duration: 13 Weeks Start Date: ASAP AlliedTravelCareers is working with Nationwide Therapy Group to find a qualified Electrophysiology Tech in Bridgeport, Connecticut, 06606! NTG is committed to matching you to the right position and we pride ourselves on our commitment to our travelers. This includes offering exceptional pay packages along with these great benefits: Medical, dental, and vision insurance Required Licensure, certifications, and CEU reimbursements Competitive 401K plan Great referral program Contact NTG for more information on this opportunity, compensation options, additional locations, and more! About Nationwide Therapy Group Nationwide Therapy Group is a recognized provider of healthcare staff across the country. We were founded by a former traveler who recognized the need for a transparent agency with a "traveler first" mentality. Not only are we recognized by Joint Commission, we are a certified minority/woman owned business. NTG has thousands of contract and permanent opportunities in all 50 states for nurses, therapists, and allied health professionals. Whether you're an employer in search of staff, or a job seeker looking for your next adventure, we have experienced staff here to help. 10766725EXPPLAT

First shift 445am-3pm Monday - Friday with some Saturdays through the year Summary: The Quality Control Technician is primarily responsible for quality assurance of all products through administration of HACCP, GMP's, Sanitation, Pest Management and other programs that ensure regulatory compliance and education of staff. The position supports the Quality, Food Safety and SQF initiatives outlined in the Quality Manual and SQF Program. Essential Job Functions : Ensures specifications are met by measuring, recording, analyzing data and working with equipment and production personnel to improve results. Perform and document daily pre-op inspections and related checks. Assist Production Supervisor with daily line set up. Calibrate scales, thermometers, and water meters daily. Prepare all the necessary paperwork needed to complete documentation of all products and processes. Test, analyze, record, and control all product and component weights as well as sensory evaluations according to specified time intervals. Record and document all HACCP related processes. Report problems or deficiencies in quality or related processes to QA Manager and Shift Supervisor. Maintain USDA, HACCP, GMP guidelines on the production floor. Interact with USDA Inspectors. Work with Production Supervisors and personnel to maintain quality /customer standards. Pre-operations testing to ensure production is authorized to start. Ensure sufficient supply of items such as gloves, hairnets/beard nets, hearing protection, aprons, hand and shoe sanitizing stations, soap, and paper towel stations. Monitor all freezer and cooler temperatures. Monitor the temperature of the meet during cooking and cooling. Monitor the pasta hydration. Ensure all metal detection/X-ray devices are operating properly. Interact with outside technicians for scale and metal detection calibrations. Take product samples at scheduled times. May participate as member of Safety Committee. Participate in Allergen and Pest Management Program. Provide support for other positions when needed. Check and record sanitizer concentrations. Verify ingredients, lots, and quantities in production batches. Other duties as assigned. Job Requirements: High School diploma or equivalent. English, Bilingual preferred. 1-2 years of Production Line Experience within the food industry a plus. Product knowledge: Acquire and maintain full knowledge of USDA and FDA codes, rules, and regulations. Proficiency in follow-up; ability to meet deadlines. Team player, positive can-do attitude. Ability to assess situations and make independent decisions to achieve success. Ability to bend, sit and stand. Ability to perform multiple complex tasks concurrently. Ability to communicate both verbally and in writing. Ability to see and walk for inspections of plant sites. Ability to hear. Ability to lift at least 25 lbs.

I have a Blood Bank Med Tech role available near Noroton, Connecticut! Details - Full-time and permanent - Shift: Days - Opportunities for growth - Full, comprehensive benefits package (PTO, health insurance, life insurance, 401k, etc) Requirements - College degree - ASCP cert - Prior experience, including blood bank Click apply or email your resume to leah@ka-recruiting.com/call or text 617-746-2751! You can also schedule a time to chat here -https://calendly.com/leahkarecruiting/10min. REF#LM3933

Thermo Fisher Scientific Inc. is the world leader in serving science, with annual revenue exceeding $25 billion. Our Mission is to enable our customers to make the world healthier, cleaner and safer. Whether our customers are accelerating life sciences research, solving complex analytical challenges, improving patient diagnostics and therapies or growing efficiency in their laboratories, we are here to support them. Our distributed team of more than 100,000 colleagues delivers an outstanding combination of innovative technologies, purchasing convenience and pharmaceutical services through our industry-leading brands, including Thermo Scientific, Applied Biosystems, Invitrogen, Fisher Scientific, Unity Lab Services and Patheon. For more information, please visit ********************* BioProcess Group (BPG) Onsite role: Meriden, CT The Quality Microbiology Laboratory Technician is responsible for performing a wide range of laboratory testing and environmental monitoring activities to ensure products meet specifications, regulatory compliance, and for continuous improvement of the manufacturing processes. This role involves execution standardized test procedures maintaining detailed documentation, and supporting investigations and quality assurance efforts. Key Responsibilities: Conduct environmental monitoring of air and water systems, including testing for bioburden, bacterial endotoxins, and viable/non-viable particulates. Perform routine and specialized testing of raw materials, incoming goods, intermediates, and/or finished products in accordance with standard operating procedures (SOPs), work instructions, and quality control plans. Prepare biological media, chemical reagents, glassware, and equipment for bacteriological and chemical testing. Maintain adequate inventory of laboratory consumables to support uninterrupted testing operations. Issue Certificates of Analysis (CoA) and Certificates of Compliance (CoC) upon request, ensuring accuracy and traceability. Assist in the management of non-conforming materials and support investigations into out-of-specification (OOS) results. Participate in the development and validation of new test procedures and the refinement of existing protocols to improve accuracy and efficiency. Contribute to ongoing product and process improvement initiatives in collaboration with cross-functional teams. Maintain a well-organized and detailed laboratory notebook documenting all work performed, observations, and analytical results. Adhere to safety protocols and maintain a clean, organized, and hazard-free laboratory environment. Minimum Requirements/Qualifications: Associate or bachelor's degree in microbiology, biology. environmental science or strongly related scientific field with minimum 1-2 years of laboratory experience. Experience in basic microbiological techniques e.g. aseptic technique, bioburden testing, endotoxin testing, and environmental monitoring. Basic proficiencies in Microsoft Words, Excel, PowerPoint. Strong attention to detail and ability to follow complex procedures accurately. Ability to work independently and collaboratively in a fast-paced, team-oriented environment. At Thermo Fisher Scientific, each one of our 100,000 extraordinary minds have a unique story to tell. Join us and contribute to our singular mission-enabling our customers to make the world healthier, cleaner and safer. Compensation and Benefits The hourly pay range estimated for this position based in Connecticut is $25.60-$28.00. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Job Title: Technical Service Chemist Please Book Directly Here: ************************************************************************ Job Purpose: The Associate Technical Services Specialist plays a pivotal role in providing sales and customer support regarding the appropriate application of biocides, quats, and silicones. This position involves troubleshooting and handling technical projects as directed by the division's Technical Manager. Responsibilities:: * Serve as the primary customer technical contact for assigned accounts. * Conduct hygiene surveys and assist with technical training and presentations to sales personnel and customers. * Design and carry out technical projects or investigations. * Assist the Technical Manager in obtaining information related to Technical Service functions and compiling technical literature. * Support sales personnel in completing requests for Technical Service or presenting reports. * Maintain up-to-date knowledge of competitors' products. * Participate in the quality and management system policy, ensuring compliance with the current ISO 9001 standard. * Ensure co-operation and communication between yourself and other departments, reporting customer communications to the relevant account-holder. * Present information and statistics to Management as required. * Monitor the effectiveness of operations in your area of responsibility. * Promote and maintain high morale and co-operation with other departments. * Comply with company safety, health, and environmental policies. * Maintain filing and computerized filing in accordance with company policy. * Undertake special projects as directed by the Technical Manager. Essential Skills * Bachelor's degree in Biology, Chemistry, or Cosmetics. * 3-6 years of working experience. * Proficient in PowerPoint and Excel. * Experience in Design of Experiments and Project Management. * Knowledge in Microbiology and Technical Service. Additional Skills & Qualifications * Formulation knowledge in Cosmetics, Disinfection, or Household products. * Experience working for a supplier a plus. Work Environment This is an onsite position operating from 9 am to 5 pm. The role will eventually require travel, with a company car provided. You will report to the Technical Director and work alongside a team of two, including lab and internal sales teams. You will assist the lab/Formulations Chemist with projects and questions. Job Type & Location This is a Permanent position based out of Trumbull, CT. Pay and Benefits The pay range for this position is $75000.00 - $85000.00/yr. Medical/Dental/Vision 10% 401k Match Paid Holidays 4 weeks of PTO Company car Workplace Type This is a fully onsite position in Trumbull,CT. Application Deadline This position is anticipated to close on Dec 31, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description Starting Pay: $17/hour Pay after Training: $28.85/hour NUVIA DENTAL IMPLANT CENTER - Entry Level Bilingual Dental Lab Technician Needed! Don't miss out on this opportunity and become part of a great growing company! This position requires 5 months of hands on training. Training will take place at one of the training centers in Utah, Texas, or Florida. Travel expenses will be covered for the duration of your training, such as flights, living accomodations, and transportation. Are you ready to get started?! Great Competitive Pay and Benefits, receive PTO within 30 Days of Employment! Medical, Dental, Vision, Life, Long/Short Term Disability Insurances Paid Training Paid Holidays Paid Parental/Bereavement Leave 401k match Employee Assistance You will report directly to the Center Manager. Nuvia Dental is growing rapidly and having very high-rate reviews! We want to keep the momentum going! If you like helping change lives, this job is for you! Responsibilities: We are hiring a Dental Lab Technician. This is a daytime position. Shifts start between 5am and 8am, Monday - Friday. All shifts are 8.5 hours in duration. Perform all the required processes assigned to create our patients' smiles in 24 hours! Finish work on or after the assigned time. Manage time efficiently and know when to prioritize cases. Maintain great communication with the Central Manager, Assistant Manager, Design and Cam departments and the rest of the Lab team. No heavy lifting, but some help lifting chairs, desks, and boxes needed. Requirements: Must be fluent in Spanish. Be willing to work overnight or during the day if needed. Professional presentation, following Nuvia dress code. You will be traveling to the closest center for on-site training.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access certain necessary systems. Security Clearance: None/Not Required Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX. Pratt & Whitney is working to once again transform the future of flight-designing, building, and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country, or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do Work along with analysts in the MCL Core laboratory to perform routine compliance testing, analysis, and investigations for Quality. The MCL Core lab consists of Chemistry, Mechanical Testing, and Metallurgical Testing labs. Challenges include interpretation of testing procedures, testing techniques, metallographic techniques, mechanical testing techniques, identifying proper testing equipment, drawing interpretation, and understanding specification requirements. Once a level of proficiency is displayed the intern will be asked to perform and record test results independently. Qualifications You Must Have * Enrolled in a degree program in Mechanical Engineering, Chemistry, Materials Science, Metallurgy or Chemical Engineering. Qualifications We Prefer * Minimum 3.0 GPA preferred * Major or minor in Metallurgy or Materials Science preferred. * Previous exposure to quality principles and tools preferred. Learn More & Apply Now! This position is classified as onsite. Please ensure this role type (defined below) is appropriate for your needs before applying to this role. Candidates will learn more about role type and current site status throughout the recruiting process. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 37,000 USD - 82,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access certain necessary systems. Security Clearance: None/Not Required Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX. Pratt & Whitney is working to once again transform the future of flight-designing, building, and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country, or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will Do Work along with analysts in the MCL Core laboratory to perform routine compliance testing, analysis, and investigations for Quality. The MCL Core lab consists of Chemistry, Mechanical Testing, and Metallurgical Testing labs. Challenges include interpretation of testing procedures, testing techniques, metallographic techniques, mechanical testing techniques, identifying proper testing equipment, drawing interpretation, and understanding specification requirements. Once a level of proficiency is displayed the intern will be asked to perform and record test results independently. Qualifications You Must Have Enrolled in a degree program in Mechanical Engineering, Chemistry, Materials Science, Metallurgy or Chemical Engineering. Qualifications We Prefer Minimum 3.0 GPA preferred Major or minor in Metallurgy or Materials Science preferred. Previous exposure to quality principles and tools preferred. Learn More & Apply Now! This position is classified as onsite. Please ensure this role type (defined below) is appropriate for your needs before applying to this role. Candidates will learn more about role type and current site status throughout the recruiting process. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 37,000 USD - 82,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

ABOUT US An unwavering pursuit of Excellence in Patient Care Every Diagnosis, Every Day. This is what we stand for. CellNetix Pathology & Laboratories is headquartered in the Seattle area in our state-of-the-art Central Processing Laboratory. As one of the largest AP labs in the United States, with over 300 staff members and 60+ distinguished Pathologists, we offer some of the most technologically advanced resources and service menus in the region. In addition, our cutting-edge Molecular Laboratory with next-generation sequencing offers groundbreaking personalized medicine testing. Our lab continues to grow in technology and scientific advancement while offering our employees a wide array of training and career progression pathways in Administration, Laboratory and Hospital Support, Histology, Cytology, Infectious Diseases, Molecular, Grossing and more. If our mission of patient care resonates with you, Come Grow With Us in Pursuit of Excellence. The Alaska Site Pathology Technician is responsible for helping to manage the overall workflow of the laboratory. Pathology Technicians at our hospital laboratory sites are responsible for providing a wide variety of technical and administrative support including specimen accessioning, scheduling and performing procedures, resolving discrepancies, as well as providing general procedural support to pathologists and hospital staff and physicians. This position requires great flexibility, attention to detail and a high degree of accuracy. The Technician is responsible for adhering to HIPAA standards and strict Standard Operating Procedures and Personal Protective Equipment (PPE) requirements. Environmental hazards such as formalin, communicable disease, fresh human tissue, etc. are present in the workplace. Position Schedule: Standard shift Monday - Friday 8:00am-4:30pm Essential Duties: Intakes and accession specimens accurately and timely Schedules and assists with patient procedures performed at the hospital which may include but are not limited to frozen sections, FNA procedures, bone marrow biopsies, CT/US procedures, etc. May assist with processing cytology specimens Assists with quality assurance and fulfilling compliance requirements Prepares reagents Pick up and deliver specimens, supplies, reports, etc, between clients and laboratory Perform maintenance and daily operational tasks Troubleshoots and helps resolve issues between departments and/or clients Trains new staff and performs competency assessments as needed Provides pathologists support which includes but is not limited to slide distribution and manifest, conference prep, pending lists, and triaging phone calls Transports slides, specimens and other material by car between hospital locations and clients Other duties as assigned Knowledge/Skills/Abilities: * Detail oriented * Collaborative, team player * Able to interact professionally with co-workers, clients and hospital departments * Use internal and hospital IT systems * Be flexible and adaptable * Strong time management and organization skills with the ability to multitask * Effective problem solving and critical thinking skills * Must have excellent communication and customer service skills * Be able to perform well under pressure and large work volume * Must have basic computer skills, including accurate typing and be able to learn new software and equipment * Ability to troubleshoot and deal with conflicts * Knowledge of Standard Operating Procedures and PPE requirements Qualifications/Experience: * Combination of High school graduate AND 1+ year of relevant clinical/laboratory experience Or * Bachelor's in medical technology, chemical, physical, or biological science strongly preferred * Preferred skills include: * Previous experience working a clinical/medical/laboratory environment * Medical terminology knowledge * Previous data entry experience * Previous customer service experience * Basic computer knowledge (Word, Excel, etc.) * Valid driver's license & safe driving record required Physical Requirements: * Safely lifting up to 50 lbs. * Computer use * Standing/sitting for long time periods * Manual dexterity * Driving * Walking * Bending Benefits: CellNetix offers a comprehensive benefits plan. * Medical, Vision, Prescription company paid options. * Employee only HSA $29.86/per month or Employee only PPO $52.47/per month. Dependent plans also available. * Dental company paid options. * Employee only $0.00/per month. Dependent plans also available. * 401K company match up to 4% * Paid Time Off (PTO) * 0-3 Years of Service: Accrue up to 15 days per year * 4-7 Years of Service: Accrue up to 20 days per year * 8-12 Years of Service: Accrue up to 25 days per year * 13+ Years of Service: Accrue up to 30 days per year * Holiday Pay * 6 paid holidays per year * 4 floating holidays per year * Company paid Life and Disability insurance. * Company paid Norton LifeLock Identity Protection. IMPORTANT NOTICE: As a healthcare organization we are committed to providing a healthy and safe environment. We require a criminal history background check and drug test for all final candidates. CellNetix is an equal opportunity employer. It is our policy that all decisions involving any aspect of the employment relationship will be made without regard to race, religion, color, national origin, age, sex, genetic information, the presence of a sensory, physical, or mental disability, or on any other basis protected by federal, state, or local law. CellNetix is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know. CellNetix follows the Centers for Disease Control and Prevention (CDC) vaccination recommendations for healthcare workers in addition to applicable Washington and Alaska State laws. At present, there is no mandatory Covid-19 vaccination requirement for Washington and Alaska State healthcare workers but employees may be subject to specific hospital system requirements for Covid-19 vaccination along with other vaccinations such as Hepatitis B or seasonal flu vaccines. Employees may be asked to submit proof of vaccination or declination/exemption prior to or during employment. *Any federal, state or local laws or public health mandates with more stringent vaccination requirements will supersede CellNetix policies and/or procedures.

Syensqo is all about chemistry. We're not just referring to chemical reactions here, but also to the magic that occurs when the brightest minds get to work together. This is where our true strength lies. In you. In your future colleagues and in all your differences. And of course, in your ideas to improve lives while preserving our planet's beauty for the generations to come. We are looking for: A student who is experienced in basic laboratory experimentation to support the New Development projects for the Home and Personal Care Business Unit markets.The co-op position is located in the Home & Personal Care (HPC) laboratory at the Research and Innovation Center in Bristol, PA. This multidisciplinary center houses the Novecare consumer products division labs, as well as R&I function labs specializing in analytical, microbiology, and physical chemistry. The HPC lab is dedicated to designing and testing formulations within its focus areas. This position offers the candidate valuable hands-on experience in aqueous formulations, surface modification, beauty cleansing, and relevant analytical techniques, providing an excellent introduction to these key fields. Experience in formulation of home / personal care products will be a plus. We count on you to: * Work alongside a senior scientist to develop novel base formulations for long-lasting hard surface cleaning, with a focus on biodegradability and the creation of microplastics-free products for our portfolio. * Formulation preparation and application testing of treated test substrates (polymeric, stainless steel or ceramic) for assay of cleaning performance and film appearance according to standardized protocols. * Plan and execute experiments, stability tests, setting milestones, driving projects to completion and creating charts and tables that clearly represent the outcomes; * Periodically summarize results in technical reports and discuss conclusions with the project team; * Housekeeping * Understand and follow key Syensqo safety policies and procedures for the site, including but not limited to the following: Emergency response / Crisis management / evacuation guidelines. Know the location of first aid and emergency response equipment, chemicals, and chemical documentation. You can count on us: * To carry out guided research where observation, independent deduction and directional input will be encouraged. * To support and train you on the lab work and safety associated with it; * To give you the opportunity to interact with the different research teams in several scientific domains (e.g., microbiology, analytical, process safety,...) * To develop your project management skills and knowledge on methodology for product development from the laboratory to the industrial scale; You will bring: * Enrolled in a BS program in Chemistry or related field; * Interest in laboratory work; * Proactivity, autonomy and open-mindedness. * Good written and oral communication skills; * Ability to work on several projects; * Good PC and computer skills and use of appropriate software You will get: * Industry hands on experience * Competitive internship rate About us * Syensqo is a science company developing groundbreaking solutions that enhance the way we live, work, travel and play. Inspired by the scientific councils which Ernest Solvay initiated in 1911, we bring great minds together to push the limits of science and innovation for the benefit of our customers, with a diverse, global team of more than 13,000 associates. Our solutions contribute to safer, cleaner, and more sustainable products found in homes, food and consumer goods, planes, cars, batteries, smart devices and health care applications. Our innovation power enables us to deliver on the ambition of a circular economy and explore breakthrough technologies that advance humanity. * At Syensqo, we seek to promote unity and not uniformity. We value the diversity that individuals bring and we invite you to consider a future with us, regardless of background, age, gender, national origin, ethnicity, religion, sexual orientation, ability or identity. We encourage individuals who may require any assistance or accommodations to let us know to ensure a seamless application experience. We are here to support you throughout the application journey and want to ensure all candidates are treated equally. If you are unsure whether you meet all the criteria or qualifications listed in the job description, we still encourage you to apply. * Syensqo is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other legally protected characteristics. #onsite #Internship

Responsible for control and maintaining all records for the monthly periodic testing program. Responsible for special testing, plating and anodizing for qualification testing and new process approvals. Responsible for upkeep of humidity and salt spray logs and tanks. Responsible for sending plating panels out for purity testing. Performing periodic testing (Including sample preparation IAW specification or defined procedures) as required Monthly outside testing, plating various plating finishes (Gold & Silver purity, Electroless Nickel composition, hydrogen uptake and boron composition). Lap Shear Testing The analysis of periodic testing data, including trend analysis Proper operation of testing equipment as required by specification (e.g. XRF, Hardness Machines, Metallograph, CMM Gages, Salt Spray & Humidity, Autoclave Press). Particle counts when required Assist QC in assembly as required Assist QC in inspection as required, and in training for canister inspection Special testing for new special process approvals Perform the required analysis of testing data, including trend analysis Assure that the Quality Lab is maintained in good condition, clean and organized. Assure that the Periodic testing packages are issued and completed on time. Ability to read and interpret plating and finishing specifications Ability to write reports, business correspondence, and procedure manuals. Ability to apply concepts of basic algebra and geometry, such as proportions, percentages, area, circumference, and volume.

What Nuclear Manufacturing contributes to Cardinal Health Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment. Nuclear Manufacturing is responsible for the manufacturing of time sensitive radiopharmaceuticals in an integrity driven, highly regulated environment (i.e. FDA, NRC, DOT) to support patient treatment through disease diagnosis, staging, and monitoring. Schedule: * 40 Hours per week * Monday - Friday * Must be willing to start working any 8hr shift between 8pm - 4am (first shift comes in at 8pm and last shift comes in at 4am on average). * Must be willing to work weekends as part of a rotation, and holidays are contingent upon customer demands * Candidate must be flexible to work different shifts, schedules, days and overtime as needed. Responsibilities * Successfully complete extensive training, including e-learning assignments and hands on components, to demonstrate and maintain proficiency * Manufactures radioactive isotopes (includes synthesis set up, hot cell manipulations, distribution) * Conducts quality control testing of each batch (utilizing gas chromatograph, dose calibrator, multi-channel analyzer, TLC plate scanner, high pressure liquid chromatograph, analytical balance, PTS, laminar flow hood and fume hood) * Works in ISO 7 cleanroom to make product vials and customer vials for use in drug production * Performs environmental and personnel monitoring in ISO 5, ISO 7, and ISO 8 environments * Coordinates daily production run schedule based on customer and pharmacy needs * Demonstrates strong documentation practices, oral communication, and writing skills. Performs clerical and administrative tasks, including maintenance of daily production records, report preparation and maintenance records * Manages SAP Inventory (includes receiving materials, properly inspecting materials for use, and maintaining proper cycle counts) * Performs daily radiation safety tasks, along with general lab cleaning Qualifications * High school diploma, GED or equivalent or equivalent work experience, preferred. Education in Sciences (Chemistry, Biology etc. preferred) * 0-1 years of experience preferred * Lab experience highly preferred * Must be able to work overnight shift (Facility operates at night.) * Prior experience in manufacturing, preferably in a controlled environment and/or regulated industry preferred * Effective written and verbal English communication skills * Able to repeatedly follow detailed processing instructions * Ability to manage several tasks at the same time; Ability to evaluate operating conditions and exercise sound judgment and problem-solving skills * Ability to manage weight up to 75 pounds * Ability to see fine particulate and differentiate colors in liquid solutions * Ability to hear, write (English), and speak (English) clearly in order to communicate in manufacturing setting * Manual dexterity required for equipment operation and occasional reach and lifting of small objects * Ability to be an effective team member What is expected of you and others at this level * Applies basic skills and techniques to complete routine tasks within assigned area * Maintains appropriate licenses, training and certifications * Works on basic and routine assignments * Works within clearly defined Standard Operating Procedures and/or scientific methods * Adheres to all quality guidelines * Works under close supervision * All work is reviewed for accuracy * Any deviations from the norm are approved by the supervisor before proceeding Pay rate: $25.00 per hour Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. * Medical, dental and vision coverage * Paid time off plan * Health savings account (HSA) * 401k savings plan * Access to wages before pay day with my FlexPay * Flexible spending accounts (FSAs) * Short- and long-term disability coverage * Work-Life resources * Paid parental leave * Healthy lifestyle programs Application window anticipated to close: 1/17/2026 *if interested in opportunity, please submit application as soon as possible. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law.

Part Time: 2nd Shift 3:00pm-10:00pm 3 days/week including weekends Pay Range: $27.00-$32.00 Based on Experience Plates Microbiology samples Performs testing in the areas of Chemistry, Hematology, Urinalysis and Coagulation. Checks the quality control of each test prior to running and reporting patient results. Calls worklists on the computer, does editing of results and data enters test results. Confirms abnormal results prior to releasing and bring any “rare and improbable” test results to the attention of a supervisor. Processes specimens and logs requisitions as needed. Reviews daily specimen management reports. Assists the Laboratory Supervisor in training new employees. Troubleshoots problems (client, instrument, computer) as needed. Performs maintenance on the automated Chemistry, Hematology, Coagulation and Urinalysis instrumentation as needed. Assists in maintaining an adequate inventory of supplies. Records lot numbers and compliance with state requirements for documentation of lot numbers with quality control and specimen records. Records the quality control and maintains the QC records on all assays performed. Data enters results into the computer. Ensures that QC is within appropriate limits and brings problems to supervisor. Reviews worklists and work from automated analyzers to ensure accuracy and timely reporting of patient results. Performs differentials and urine sediments as needed. Performs other tasks and procedures that are commensurate with education, training and abilities. Responsible for all clerical functions associated with specimen integrity, testing, identification and reporting of department testing. Follows all safety protocols as outlined in safety manual. Identifies and pursues self-improvement needs Seeks coaching/mentoring when appropriate Performs other duties as assigned. Compliance Responsibilities Complies with applicable legal requirements, standards, and procedures including, but not limited to, those within the Compliance Process, Code of Conduct, and Corporate Integrity Agreement (CIA). Participates in required orientation, Compliance and HIPAA training programs. Reports concerns and suspected incidences of non-compliance using the 4-Step Reporting Process Cooperates with monitoring and audit functions and investigations. Participates, as requested, in process improvement responsibilities. POSITION QUALIFICATIONS Core Competencies/Skill Sets Excellent verbal and written communication skills. Detail oriented and organizational skills. Exercises accuracy and precision in completion of prescribed tasks and treatments. Professional Experience/Educational Requirements Candidate must have either a Bachelor's Degree and MT (ASCP), or an Associated Degree with MLT certification or equivalent degree in health science. One year experience in chemistry/hematology preferred but not required. Must have a concept with all phases of the operation of the automated instruments utilized for routine analysis. Good planning and organizational skills desirable. Candidates must have sound computer skills. Certification/Licensure Must qualify under CLIA as a Medical Technologist or Medical Laboratory Technician Benefits: TridentCare offers a competitive wage and robust benefit package to full time employees. Part time employees are eligible for many of the same below, pro-rated. Benefits include: Two weeks of vacation time Health Insurance after 30 days! Sick time 8 paid holidays Medical insurance allowance, giving you the freedom to customize your plan to fit your needs Dental insurance Vision insurance Disability insurance Company paid life insurance. 401(k) #MMBX

Are you an experienced Clinical Lab Professional? Are you looking to embark on a new challenge in your career, or start your career in Clinical Lab Science? If so, Labcorp wants to speak with you about exciting opportunities to join our team as a Technician at our lab in Holyoke, MA. In this position you will work in a fast paced, customer focused, and challenging environment, and will be a part of our overall mission at Labcorp: “Improving Health, Improving Lives”. **Pay Range: $27.00 - $41.00 per hour All job offers will be based on a candidate's skills and prior relevant experience, applicable degrees/certifications, as well as internal equity and market data. Work Schedule: Monday - Friday, 7am - 3:30pm, rotating every other weekend. Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please click here. Job Responsibilities Determine the acceptability of specimens for testing according to established criteria Perform routine and complex technical procedures and functions according to departmental Standard Operating Procedures Monitor, operate and troubleshoot instrumentation to ensure proper functionality Demonstrate the ability to make technical decisions regarding testing and problem solving Prepare, test and evaluate new reagents or controls Report accurate and timely test results in order to deliver quality patient care Perform and document preventative maintenance and quality control procedures Identify and replenish testing bench supplies as necessary Assist with processing of specimens when needed Maintain a safe work environment and wear appropriate personal protective equipment Requirements: Associate's degree in Chemical or Biological science, Clinical Laboratory Science, Medical Technology or a non-traditional Associate's degree that meets local regulatory (CLIA & State) requirements Previous clinical laboratory testing experience is highly preferred Minimum 3 months of clinical laboratory testing experience or a MLT degree ASCP or AMT certification is preferred Ability to work independently and within a team environment Proficient with computers; Familiarity with laboratory information systems is a plus High level of attention to detail along with strong communication and organizational skills Must be able to pass a standardized color vision screen Flexibility to work overtime or other shifts depending on business needs If you're looking for a career that offers opportunities for growth, continual development, professional challenge and the chance to make a real difference, apply today! Labcorp is proud to be an Equal Opportunity Employer: Labcorp strives for inclusion and belonging in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications and merit of the individual. Qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.