Machine operator jobs in West Columbia, SC

NORMAL DUTIES include the following: Monitors quality and specifications incoming stock for flute, size; score position, color, label, label direction, print, and print direction and condition. Monitors quality and specifications of plates and drawings. Mounts cutting dies, printing plates Pulls rolls per the factory order. Sets side gates, belts, stacker attachments per factory order Places machine in time. Sets caliper for board and printing plate(s). Maintains information in the computer system in a timely manner. Makes adjustment needed to ensure product being produced meets all quality standards. Reports any inability to meet quality standards or setup standards to machine center Reports any maintenance problems to the machine center supervisor and assist as needed in repair of machine center. Prepares for next order while monitoring current production, as time will allow. Performs quality checks on product before and during production to ensure quality standards are met and maintained during production. The Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have demonstrated the ability to perform each normal duty satisfactory in this and all lower classifications in this line of progression. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. THESE RESPONSIBILITIES AND DUTIES ARE NOT INTENDED TO BE ALL-INCLUSIVE. RESPONSIBILITIES AND DUTIES MAY BE ADDED OR DELETED AS NECESSARY.

Where you will work We are excited to announce the opening of a new production facility in Columbia, South Carolina, with operations expected to begin by the end of October. This is a unique opportunity to join our team during an exciting phase of growth and help shape the success of a brand-new site from the ground up. At Manchester Industries, a Clearwater Paper Company, we provide unparalleled service and the best solutions in Paperboard Sales, Sheeting, and Distribution. Since 1978, we have helped our customers meet the daily demands of the commercial printing, publishing, point of purchase display, specialty packaging, and folding carton industries. Through innovation and continual improvement in precision converting technology, we provide prime paperboard grades from leading mills to paper merchants and packaging companies. With vast inventories at Manchester's 5 strategic locations: Pennsylvania, Indiana, Michigan, South Carolina, and Texas, we maintain 14 precision sheeters, 9 guillotine trimmers, 4 carton packing lines, and 2 slitter rewinders within 450,000 combined square feet of manufacturing and warehousing space. The goal of Manchester Industries is to provide an exceptional service platform with our staff of committed employees. Through working with customers and suppliers together, we can find profitable and proficient solutions in this ever-changing marketplace. This role will be at Manchester Industries' new location in Columbia, South Carolina. We offer competitive starting pay with increases after 6 months and 12 months of employment, with good performance. Shift differential for working 2nd and 3rd shifts. Benefits eligibility as of the 31st day of employment. What you will do The Machine Helper is responsible for performing duties as a roll tender or wrapper/bander, assisting Machine Operators in the production of sheeted skids of paperboard. The employee in this position must be able to work with minimal supervision and communicate effectively with both production and office personnel. * Responsible for helping in the Wrapper/Bander area for the final phase in the manufacturing process of the product * Confirms skids to order and prepares skids for delivery and/or storage in compliance with quality and customer specifications, stages skids for use. * Stages completed orders in the warehouse according to job number and customer, in a manner to assure easy retrieval for shipment and proper spacing according to established procedures * Properly wraps and bands skids with the proper operation and use of approved tools such as pliers and pallet jacks, responsible for plier set-up * Assists other wrapper/banders as necessary, assists in training new Machine Helpers * Perform minor maintenance activities and works closely with Maintenance Technician as needed * Conduct routine inspections of equipment based on preventative maintenance routes/check sheets/frequencies * Attend and apply training provided by the Company, both job and department specific * Recognize errors and problems with delivered materials, actively troubleshoot top problems, and escalate unresolved issues with a focus to ensure inventory accuracy and receipt of goods * Confirming rolls to order and preparing rolls for use, including the preparation of leftover rolls to return to inventory and storage * Load rolls into roll stand, splice rolls as needed * Responsible for the core splitter operation * Assists other Roll Tenders as necessary, assists in the training of new Machine Helpers * Perform minor maintenance activities and works closely with Maintenance Technician as needed * Conduct routine inspections of equipment based on preventative maintenance routes/check sheets/frequencies * Attend and apply training provided by the Company, both job and department specific * Recognize errors and problems with delivered materials, actively troubleshoot top problems, and escalate unresolved issues with a focus to ensure inventory accuracy and receipt of goods * Hold self and others to a high level of safety standards, ensuring workplace safety policies are upheld and safety rules are followed (lockout/tagout procedures, safe driving practices, appropriate PPE, etc.) * Participate as needed in safety incidents and help investigate the root cause. * Maintain a clean working environment by complying with procedures and housekeeping responsibilities, and properly disposing of waste. * Operate, maintain, and inspect equipment to ensure compliance with all applicable environmental regulations, procedural reporting, and safety requirements * Act in a manner consistent with company values and attitudes What you will need To be successful in this position, we are looking for candidates with the following: * High School Diploma or GED equivalent (required) * Completion of a pre-employment assessment upon application. * Minimum 2 years continuous full-time work experience or have been a full-time student (required) * Industrial production or operator experience (preferred) * Understand and comply with all manufacturing safety procedures including personal protective equipment (required) * Able to work in a physically demanding environment including temperature extremes, loud noise, avoiding slipping, tripping, and falling hazards * Physically capable of manual labor that includes bending, walking, sitting, and climbing in and around machinery and equipment for an entire 12-hour shift. * Able to lift, up to 40 lbs frequently, between 40 and 50 lbs occasionally, and over 50 lbs minimally. When lifting 50 lbs and above, the Operator will use team lifting and overhead crane assistance. * Work environment includes exposure to compressed air, steam, lubrication oil, dust, and hydraulic fluid. * Able to work an 8-hour shift Monday-Friday. Able to work overtime as needed, including weekends and Holidays. Applying to this position requires completion of a pre-employment assessment that can be taken online. Please ensure you have completed this assessment in order to be considered for this opportunity. Total Rewards Detail We prioritize an exceptional workplace experience, offering a comprehensive total reward package. Compensation ranges and starting pay are estimates based on market data. Actual offers account for internal equity and the candidate's job-related knowledge, skills, education, and experience. Benefits, including medical, dental, vision, and more, generally begin after 30 days. Interested in learning more about career opportunities at Manchester Industries? Click here to learn more.

Job DescriptionGPS is currently hiring Machine Operators for immediate positions in Prosperity, SC.As a Machine Operator, you will play a vital role in the production and quality control of non-woven paper products. Why you should apply: $18.50/hr Temp-to-hire Full benefits offered after hire, including: Medical, dental, and vision insurance 401(k) with employer contributions Short-term & long-term disability Pet insurance Employee discounts via LifeMart Paid vacation and sick days Shift Schedule: 8:00 am - 6:00 pm Monday, Tuesday, Thursday, Friday What will you do: Assist with machine startup, operation, and shutdown Train in all areas: press, slitting, packaging, inspection, and forklift (certification provided) Maintain a clean and organized workspace Perform general labor tasks as needed Ideal Experience: Candidates with prior experience on slitters, press machines, or in robotic cell operations are highly encouraged to apply. Requirements: High School Diploma or GED preferred Ability to lift up to 50 lbs Basic math, reading, and computer skills Mechanical aptitude and measuring tool knowledge a plus Apply NOW!! Drug-free workplace and a criminal background check are required. EOE

The Machine Operator is responsible for programming, setting up, and operating a computer numerical control (CNC) machine while maintaining high quality and safety standards. Primary Responsibilities Read drawings Program CNC machine Estimate structural weights Read and use structural shapes charts Use layout and multing techniques to maximize material yields Take initiative and assist in the resolution of production problems Monitor performance, check output quality, and make adjustments as needed to maintain consistent production All other duties as assigned Qualifications and Requirements Knowledge of Robot Machine Certified crane operator (complex) Understand production processes Ability to perform numerical conversions (i.e., decimals to fractions) Good verbal communication skills Good technical skills Detail oriented Bending, lifting, twisting, and standing required to perform job duties Education High school diploma

Mark Anthony Group is an entrepreneurial drinks company, built from the ground up by thinking differently, innovating and doing the unexpected. Our company is rooted in family values, a bold vision and relentless determination to continuously raise the bar and make a positive difference in consumers' lives. Founded in 1972, we've grown organically from a one-person import wine business into an international drinks company whose hallmarks include a portfolio of luxury wineries and iconic beverage brands, including White Claw Hard Seltzer, Mike's Hard Lemonade, Cayman Jack and Más+ by Messi™. Role Purpose: Mark Anthony Brewing Inc. is hiring a PACKAGING OPERATOR responsible for monitoring process equipment, basic troubleshooting of any unforeseen process events, and ensuring that Safety and Quality are at the forefront of all activities. The PACKAGING OPERATOR will be cross trained in multiple areas and will be qualified to complete tasks in the various areas of packaging, sanitation, quality, and maintenance. Accountabilities & Impact: Ensure continuous operation of process equipment through active process monitoring and troubleshooting. Effectively communicate job knowledge and process changes with team members and management thru various forms of daily communication (shift handover meeting, daily production meetings, email, action logs, work orders, etc). Perform quality inspection of product using basic lab equipment and SOPs as a guide. Complete and maintain written documentation certifying completion of inventory checks, quality inspections, sanitation requirements, batch and blending production following SOP's, and basic maintenance tasks. Maintain sanitation and lubrication of machinery, equipment, storage bins, workstations, etc. Report safety and/or equipment issues to leadership. Skills & Experiences Needed: High School diploma or equivalent required. 1+ years of manufacturing experience. Demonstrated experience using computers and software skills such as MS office. Must be at least 21 years of age Working conditions: Fast-paced and constantly changing work environment Shift work including days, evenings, overnight shifts, and up to 12 hrs. Overtime including weekends and holidays as needed Ability to lift 50 lbs. Ability to stand/move up to 8-12 hours per day. Ability to ascend/descend stairs throughout shift. Must wear Personal Protective Equipment (PPE) including (but not limited to) bump cap, safety steel toe shoes and safety glasses. Must adhere to Good Manufacturing Practices (GMPs). At Mark Anthony, we exist to Unearth the Extraordinary: Our Purpose is not just a statement; it is a call to action that binds us together and ignites our passion for making a difference. It is the driving force behind why we do what we do every single day, connecting our global organization across all business units, roles, and locations. We are: Best in Our Craft We set the standard with a pursuit of excellence that can be found in everything from our products and processes to our plants and people.​ Ambitiously Curious We stay curious, dreaming big and navigating the unknown with an enduring belief in better.​​ Made With Humility We bring humility, authenticity, fun, and support to every collaboration and celebrate wins as a team. Daringly Disruptive We disrupt the status quo, moving fast to seize opportunities and acting scrappy ​to stay ahead of industry giants.​

Job Description Machine Operator - Entry Level (Sheet Metal Fabrication Shop) Walker White Mechanical - Columbia, SC Full-Time | Competitive Pay + Benefits | Training Provided About Us Walker White Mechanical is a trusted leader in HVAC, plumbing, and sheet metal fabrication, serving commercial and industrial clients across South Carolina. We take pride in craftsmanship, customer service, and delivering high-quality mechanical solutions. As our fabrication shop continues to grow, we're looking for a motivated Entry-Level Machine Operator to join our team. Position Summary This is an excellent opportunity for someone who enjoys hands-on work, wants to develop technical skills, and is eager to be part of a team that fabricates components used on major mechanical projects. No prior experience is required-just a strong work ethic, willingness to learn, and attention to detail. Responsibilities Operate and assist with setup of fabrication machinery, including shears, brakes, and plasma tables Measure, cut, and form sheet metal according to shop drawings and specifications Read and interpret basic blueprints or drawings Perform quality checks to ensure accuracy and consistency of fabricated parts Maintain a clean, organized, and safe work environment Assist with loading, unloading, and material handling as needed Qualifications Mechanical aptitude and eagerness to learn new skills Ability to read a tape measure and perform basic math Dependable attendance and strong work ethic Previous fabrication or manufacturing experience is helpful but not required-we will train the right candidate Why Join Walker White Mechanical? Competitive pay and a full benefits package Training and advancement opportunities within the shop and company Stable, full-time employment with long-term career potential Clean, safe, and team-oriented work environment How to Apply If you're ready to start a career in sheet metal fabrication and grow with a respected mechanical contractor, apply today!

Machine Operator / Assembler - Multiple Shifts - Newberry, SC GPS is hiring for immediate Machine Operator and Assembler positions across multiple shifts in Newberry, SC. Why Apply? and shift) with potential for hire • On-the-job training and advancement opportunities • Exceptional benefits package after hire, including: - Medical, 401(k), 32 personal leave hours - Quarterly attendance bonus, referral bonus, birthday canteen bucks Available Shifts: • Day Shift (Mon-Thu, 6 AM-6 PM) • Night Shift (Mon-Thu, 6 PM-6 AM) • Weekend Shift (Fri-Sun, 6 AM-6 PM) What You'll Do: • Set up and operate machines and/or perform assembly tasks • Load materials, install tooling, and cut, label, and package parts • Inspect parts for quality and troubleshoot operational issues • Follow safety guidelines and maintain a clean work area • Perform repetitive tasks and lift up to 50 lbs What You Need: • Stable work history with verifiable references • 1 year of machine operation or general labor experience preferred • Ability to use and read a tape measure and perform basic math • Physical stamina to stand, lift, stretch, and bend • Reliable attendance and punctuality A drug-free workplace and a criminal background check are required. EOE

Job DescriptionDescription: INDEVCO North America (INA) is seeking a skilled and experienced Extrusion Operator specialized in Blown Film production to join our manufacturing team. The ideal candidate will be responsible for the efficient operation of extrusion machinery, ensuring the production of high-quality blown film products. The Extrusion Operator will play a crucial role in maintaining optimal machine performance, troubleshooting issues, and adhering to safety and quality standards. Key Responsibilities: Operate and monitor blown film extrusion machinery to produce quality film products according to production specifications. Set up, adjust, and control machine settings, such as temperatures, speeds, and thickness, to achieve desired product characteristics. Conduct routine equipment checks and preventative maintenance to ensure continuous and efficient operation. Monitor product quality throughout the production process, making necessary adjustments to maintain consistent quality standards. Conduct visual inspections and measurements of finished products to ensure they meet customer and company specifications. Troubleshoot and address any issues related to product defects or deviations from quality standards. Adhere to all safety protocols and guidelines to ensure a safe working environment. Operate machinery in compliance with company policies, industry regulations, and quality standards. Report any safety incidents, equipment malfunctions, or maintenance needs promptly. Maintain accurate production records, including machine settings, production rates, and quality control data. Complete required documentation and reports in a timely and accurate manner. Requirements: High school diploma or equivalent. Additional technical or vocational training in extrusion operations is a plus. Proven experience as an Extrusion Operator, with a focus on blown film production. Familiarity with the operation and maintenance of blown film extrusion machinery. Ability to set up, operate, and troubleshoot blown film extrusion equipment. Basic understanding of mechanical and electrical systems related to extrusion machinery. Strong attention to detail and commitment to producing high-quality products. Knowledge of safety procedures and a commitment to maintaining a safe work environment. Effective communication skills, both verbal and written. Ability to work collaboratively in a team environment. Ability to lift and move heavy materials as needed. Comfortable working in a manufacturing environment with exposure to noise, dust, and varying temperatures. At INDEVCO, we provide our employees with a highly competitive benefits package, including life, medical, and dental insurance coverage, a 401(K)-matching plan, paid vacation, and an Employee Tuition Reimbursement benefit for professional certifications and degree programs. INDEVCO North America, Inc. is an equal opportunity employer. We embrace diversity and are dedicated to fostering an inclusive environment for all our employees.

Full-time Description The Machine Operator will read blueprints, make adjustments, set stops or guides, and look for defects in parts while operating a metal saw, poly saw, or shear. The Stamping Operator will produce stamped parts by operating a stamping press; maintaining quality and safety standards; and keeping records. Supervisory Responsibilities: None. Duties/Responsibilities: Starts, stops, and sets up machines in a safe manner. Operates the machine, keeping an eye out for any defects or issues. Uses measurement tools to ensure accuracy. Completes quality checks to verify condition of material. Verifies type of material before cutting. Changes blades, cleans sensors, replenishes coolant, and calibrates machines. Operates forklift and crane. Helps pack and transport finished pieces as needed. Accurately completes paperwork. Maintains 6S (sort, set, shine, standardize, sustain, safety) standards in all work stations. Completes other duties as assigned by supervisor. Skills: Knowledge of blueprint reading. Organizational skills and attention to detail. Time management skills with a proven ability to meet deadlines. Basic math skills (ex. addition, subtraction, multiplication, converting fractions to decimals, converting standard measurements to metric system, etc.). Basic computer skills. Mechanical inclination. Abilities: Read a tape measure and other measurement tools. Must have prior industrial machine operator experience. Function well in a high-paced and at times stressful environment. Work well with others on a team. Follow instructions and processes. Solve problems quickly and efficiently. Flexibility. Willingness to be trained by supervisor. Ability to multitask. Willingness to have performance measured daily. Preferred Education and Experience: High school diploma or equivalent. Forklift certification. Physical Requirements: Uncontrolled environmental conditions: noise, dust, dirt, and mobile equipment. Routine, repetitive lifting up to 35 lbs., occasional, heavy lifting, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day. Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, feeling, and walking 8 to 10 hours per day. Ability to work up to 8-10 hour shifts and overtime as required by the work. Use of all limbs, dexterous and steady use of hands and arms for long periods of time. Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area. Note: This position may require working with fiberglass, which can be itchy to some. Monti, Inc. is proud to be an Equal Opportunity Employer.

Job DescriptionNow Hiring: Amada Brake Press Operator - 2nd Shift (Cope, SC) We're looking for a skilled Amada Brake Press Operator to join our growing team in Cope, SC! This is a great opportunity for an experienced operator who takes pride in precision work and reliability.Shift & Pay: 2nd Shift: Monday-Friday, 4:00 PM - 2:30 AM Pay: $15-$17 per hour, depending on experience Requirements: Minimum 2+ years of recent Brake Press operating experience (Amada preferred) Ability to read blueprints, make offset adjustments, and set up tooling Must be able to lift 50+ lbs repeatedly Punctual, dependable, and detail-oriented Steel-toed shoes and reliable transportation required Must be able to interview immediately - interview will include a hands-on skills test To Apply: Please submit a current, up-to-date resume that clearly reflects your relevant experience. Applicants without an updated resume will not be considered.We look forward to connecting with motivated, hardworking professionals ready to take the next step in their career!

Regular City: Camden, SC, United States Location: Camden Plant and shift. The Opportunity: Step into the role of a Machine Operator and let your motivation, problem-solving skills, and teamwork abilities shine. At our cutting-edge mills, you won't just be working in a safe and efficient manner; you'll be working hands-on with a dynamic team, actively involved in the day-to-day success of our mill. If this speaks to you, this opportunity at our sawmill in Camden, SC, might just be your calling! Join us and discover a pathway for career advancement where your hard work is not only recognized but rewarded. This role is a permanent full-time position working Monday through Friday on our 2nd shift. What you will do as a Machine Operator: * Rotate through various job responsibilities and tasks within your assigned workspace on an hourly basis. * Responsible for safely operating industrial machinery. * Work collaboratively with team members to achieve production goals. * Maintaining a commitment to quality throughout the production process. * Conduct routine inspections of machinery to identify any signs of wear, damage, or malfunction, reporting findings to supervisors and maintenance for preventive action. * Actively participate in quality improvement initiatives. Experience and skills that will help you stand out: * Ability to work in a safe and efficient manner in a fast-paced production environment. * Ability to perform repetitive, manual tasks for extended periods of time including piling lumber, standing for long hours, walking, climbing stairs, bending, and lifting up to 50lbs. * Ability to work in an environment that includes exposure to environmental elements, moving mechanical equipment, loud noise, and dust. * 1-3 years' experience working in a manufacturing and/or industrial environment would be considered a plus. Knowledge of the lumber manufacturing process would be an asset. * Excellent teamwork skills and the ability to collaborate effectively with co-workers. * High degree of urgency and attention to detail. * Desire to learn, grow, and succeed. We see inclusion and diversity as essential to our productivity, creativity, innovation, and competitive advantage. Therefore, we strive for a fair and equitable recruitment process where hiring decisions are based on each applicant's qualifications and experience. Nearest Major Market: Columbia Nearest Secondary Market: South Carolina Job Segment: Machinist, 2nd Shift, Equipment Operator, Industrial, Manufacturing, Night

PolyClean USA is seeking a highly motivated Machine Operator to join our team at Camden, SC. This role involves operating and maintaining optical sorting equipment to ensure the quality of plastic pellets. The ideal candidate is mechanically inclined, detail-oriented, and comfortable working in an industrial environment. If you enjoy working with cutting-edge sorting technology while staying local, this is the perfect opportunity for you! Key Responsibilities Sorting Operations & Equipment Management Operate and maintain EVO optical sorting units for both single and dual sort operations. Adjust sort settings to maintain or improve sorting quality. Understand product flow from classifier to pack-out and ensure accurate sorting. Perform “Turn Around” procedures to clean and prepare equipment for new product runs. Follow production schedules and adjust presets according to product type. Quality Control & Sampling Conduct routine quality inspections to ensure sorted material meets client standards. Collect and document material samples according to sampling workflow. Work closely with Satake technicians for equipment calibration and troubleshooting. Equipment Maintenance & Safety Compliance Inspect, clean, and replace hoses, receiver lids, and filters as needed. Perform routine maintenance on Satake sorting machines and air compressors. Comply with Lockout/Tagout (LOTO) protocols when servicing equipment. Properly complete and submit daily safe work permits. Workplace Efficiency & Communication Maintain clear and professional communication with coworkers, supervisors, and clients. Identify and order necessary supplies to support uninterrupted operations. Work effectively both independently and as part of a team in a structured environment. Qualifications & Requirements Required Qualifications: High school diploma or equivalent. Prior experience in manufacturing, production, or machine operation. Ability to read and comprehend technical manuals and production schedules. Strong mechanical aptitude and troubleshooting skills. Ability to work independently and follow standardized operating procedures. Preferred Qualifications: Experience operating optical sorting equipment (e.g., EVO, Satake). Prior experience in plastics, chemicals, or industrial sorting environments. Work Environment & Physical Requirements Work is performed in an industrial setting with exposure to noise, dust, and moving machinery. Requires wearing personal protective equipment (PPE) at all times (hard hat, FR clothing, safety glasses, earplugs, etc.). Ability to lift up to 50 lbs, stand for extended periods, and work in varying temperatures. Occasional travel may be offered/required during off-seasons. Join our team and be part of an industry-leading company offering stability, growth, and hands-on experience with advanced sorting technology. Apply today!

The TFE Operator will be responsible for machine operation. This would include troubleshooting, documentation, and quality of material.

NORMAL DUTIES include may include the following: Monitors quality and specifications incoming stock for flute, size; score position, color, label, label direction, print, and print direction and condition. Monitors quality and specifications of plates and drawings. Monitors and adjusts the pH and viscosity of the ink used for each job. Mounts cutting dies, printing plates Pulls rolls per the factory order. Sets side gates, belts, stacker attachments per factory order Places machine in time. Sets caliper for board and printing plate(s). Maintains information in the computer system in a timely manner. Makes adjustment needed to ensure product being produced meets all quality standards. Reports any inability to meet quality standards or setup standards to machine center Reports any maintenance problems to the machine center supervisor and assist as needed in repair of machine center. Prepares for next order while monitoring current production, as time will allow. Performs quality checks on product before and during production to ensure quality standards are met and maintained during production. Must be able to operate sit down forklift. The Assistant Operator will also perform any other duties as assigned. QUALIFICATION REQUIREMENTS: The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION and/or EXPERIENCE: High School diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and interpret written documents such as safety rules, operating and maintenance instructions, factory orders, and procedure manuals. Ability to write routine reports and correspondence. Ability to communicate effectively. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure (English and Metric systems), using whole numbers, common fractions, and decimals. Ability to read an English and metric system tape measure. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move up to fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions.

Job DescriptionMachine Operator / Assembler - Multiple Shifts - Newberry, SC GPS is hiring for immediate Machine Operator and Assembler positions across multiple shifts in Newberry, SC. Why Apply? and shift) • Long-term position with potential for hire • On-the-job training and advancement opportunities • Exceptional benefits package after hire, including: - Medical, 401(k), 32 personal leave hours - Quarterly attendance bonus, referral bonus, birthday canteen bucks Available Shifts: • Day Shift (Mon-Thu, 6 AM-6 PM) • Night Shift (Mon-Thu, 6 PM-6 AM) • Weekend Shift (Fri-Sun, 6 AM-6 PM) What You'll Do: • Set up and operate machines and/or perform assembly tasks • Load materials, install tooling, and cut, label, and package parts • Inspect parts for quality and troubleshoot operational issues • Follow safety guidelines and maintain a clean work area • Perform repetitive tasks and lift up to 50 lbs What You Need: • Stable work history with verifiable references • 1 year of machine operation or general labor experience preferred • Ability to use and read a tape measure and perform basic math • Physical stamina to stand, lift, stretch, and bend • Reliable attendance and punctuality A drug-free workplace and a criminal background check are required. EOE

INDEVCO North America (INA) is seeking a skilled and experienced Extrusion Operator specialized in Blown Film production to join our manufacturing team. The ideal candidate will be responsible for the efficient operation of extrusion machinery, ensuring the production of high-quality blown film products. The Extrusion Operator will play a crucial role in maintaining optimal machine performance, troubleshooting issues, and adhering to safety and quality standards. Key Responsibilities: Operate and monitor blown film extrusion machinery to produce quality film products according to production specifications. Set up, adjust, and control machine settings, such as temperatures, speeds, and thickness, to achieve desired product characteristics. Conduct routine equipment checks and preventative maintenance to ensure continuous and efficient operation. Monitor product quality throughout the production process, making necessary adjustments to maintain consistent quality standards. Conduct visual inspections and measurements of finished products to ensure they meet customer and company specifications. Troubleshoot and address any issues related to product defects or deviations from quality standards. Adhere to all safety protocols and guidelines to ensure a safe working environment. Operate machinery in compliance with company policies, industry regulations, and quality standards. Report any safety incidents, equipment malfunctions, or maintenance needs promptly. Maintain accurate production records, including machine settings, production rates, and quality control data. Complete required documentation and reports in a timely and accurate manner. Requirements High school diploma or equivalent. Additional technical or vocational training in extrusion operations is a plus. Proven experience as an Extrusion Operator, with a focus on blown film production. Familiarity with the operation and maintenance of blown film extrusion machinery. Ability to set up, operate, and troubleshoot blown film extrusion equipment. Basic understanding of mechanical and electrical systems related to extrusion machinery. Strong attention to detail and commitment to producing high-quality products. Knowledge of safety procedures and a commitment to maintaining a safe work environment. Effective communication skills, both verbal and written. Ability to work collaboratively in a team environment. Ability to lift and move heavy materials as needed. Comfortable working in a manufacturing environment with exposure to noise, dust, and varying temperatures. At INDEVCO, we provide our employees with a highly competitive benefits package, including life, medical, and dental insurance coverage, a 401(K)-matching plan, paid vacation, and an Employee Tuition Reimbursement benefit for professional certifications and degree programs. INDEVCO North America, Inc. is an equal opportunity employer. We embrace diversity and are dedicated to fostering an inclusive environment for all our employees.

Full-time Description The Machine Operator will read blueprints, make adjustments, set stops or guides, and look for defects in parts while operating a metal saw, poly saw, or shear. The Stamping Operator will produce stamped parts by operating a stamping press; maintaining quality and safety standards; and keeping records. Supervisory Responsibilities: None. Duties/Responsibilities: Starts, stops, and sets up machines in a safe manner. Operates the machine, keeping an eye out for any defects or issues. Uses measurement tools to ensure accuracy. Completes quality checks to verify condition of material. Verifies type of material before cutting. Changes blades, cleans sensors, replenishes coolant, and calibrates machines. Operates forklift and crane. Helps pack and transport finished pieces as needed. Accurately completes paperwork. Maintains 6S (sort, set, shine, standardize, sustain, safety) standards in all work stations. Completes other duties as assigned by supervisor. Skills: Knowledge of blueprint reading. Organizational skills and attention to detail. Time management skills with a proven ability to meet deadlines. Basic math skills (ex. addition, subtraction, multiplication, converting fractions to decimals, converting standard measurements to metric system, etc.). Basic computer skills. Mechanical inclination. Abilities: Read a tape measure and other measurement tools. Must have prior industrial machine operator experience. Function well in a high-paced and at times stressful environment. Work well with others on a team. Follow instructions and processes. Solve problems quickly and efficiently. Flexibility. Willingness to be trained by supervisor. Ability to multitask. Willingness to have performance measured daily. Preferred Education and Experience: High school diploma or equivalent. Forklift certification. Physical Requirements: Uncontrolled environmental conditions: noise, dust, dirt, and mobile equipment. Routine, repetitive lifting up to 35 lbs., occasional, heavy lifting, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day. Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, feeling, and walking 8 to 10 hours per day. Ability to work up to 8-10 hour shifts and overtime as required by the work. Use of all limbs, dexterous and steady use of hands and arms for long periods of time. Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area. Note: This position may require working with fiberglass, which can be itchy to some. Monti, Inc. is proud to be an Equal Opportunity Employer.

GPS is currently hiring Machine Operators for immediate positions in Prosperity, SC. As a Machine Operator, you will play a vital role in the production and quality control of non-woven paper products. Why you should apply: $18.50/hr Temp-to-hire Full benefits offered after hire, including: Medical, dental, and vision insurance 401(k) with employer contributions Short-term & long-term disability Pet insurance Employee discounts via LifeMart Paid vacation and sick days Shift Schedule: 8:00 am - 6:00 pm Monday, Tuesday, Thursday, Friday What will you do: Assist with machine startup, operation, and shutdown Train in all areas: press, slitting, packaging, inspection, and forklift (certification provided) Maintain a clean and organized workspace Perform general labor tasks as needed Ideal Experience: Candidates with prior experience on slitters, press machines, or in robotic cell operations are highly encouraged to apply. Requirements: High School Diploma or GED preferred Ability to lift up to 50 lbs Basic math, reading, and computer skills Mechanical aptitude and measuring tool knowledge a plus Apply NOW! Drug-free workplace and a criminal background check are required. EOE

The TFE Operator will be responsible for machine operation. This would include troubleshooting, documentation, and quality of material. • High school diploma or equivalent • The ability to carry out oral and written instructions along with the ability to adapt to different situations • The ability to lift up to 50 lbs. repetitively; push/ pull approximately 11lbs., walk up and down stairs. • The employee must have the ability to perform inspection functions such as visual inspection to detect cosmetic defects and color differentiation of products. • Must have basic mathematical skills including addition subtraction, multiplication, division, fractions and decimals. Must be able to read and write legibly. • Attendance and punctuality are essential functions of this position. Any unscheduled absence or tardy will have a negative impact on our ability to meet our production objectives. • Physical aspects of the job are defined on the Physical Demands Analysis located in HR Must Meet WorkKeys/WIN Requirements (Level 3 for Reading & Level 4 for Math) • Install proper tooling, load, run and monitor extruder with minimum downtime. • Make pre-forms out of resin as specified on order card. • Measure and maintain correct wall thickness of tubing. • Operator only runs one machine. • Keep tooling and machines in good working condition. • Polish and straighten tooling on lathe. • Keep work area clean and free of debris. • Observe all safety rules and regulations. • Maintain good communications within the department.