Mechanical design engineer jobs in Cary, NC

Notes: Fully Onsite Open for candidates with experience with project engineering and coordination experience Top 3 Must Have Skill Sets: 1. Ability to work well under pressure 2. Facilities knowledge and experience 3. Great communication skills 4. Proactive 5. Willingness to learn new experiences Job Details: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for facilities related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for facilities system, perform quality and overall facilities walkdowns. Perform field evaluations of existing systems and provide engineering design recommendations. Skills: self-started, ability to communicate effectively, manage tasks to completion. Experience with facilities management and projects is a must. Basic Qualifications Master degree OR Bachelor degree and 2 years of experience OR Associate degree and 6 years of experience OR High school diploma / GED and 8 years of experience

Pay: $80,000.00 - $135,000.00 per year Note: This position requires employees to be on-site five days a week at either the Raleigh, NC or Charlotte, NC office. Note: The qualified candidate for this position must have at least 5 years of transportation hydraulic design experience, preferably with NCDOT projects. About Our Client Our client is a privately held, employee-owned, and woman-owned engineering firm with over three decades of success. Headquartered in Raleigh, NC, they are recognized among the top firms in the Southeast and are a certified DBE and HUB business. With offices in Raleigh and Charlotte, they provide engineering services in transportation, roadway design, hydraulics, and more, delivering innovative solutions with a hands-on approach. Job Description Lead and support hydrology and hydraulic analysis for roadway and transportation projects Design stormwater management systems, ponds, and conveyance systems Perform erosion control and outfall analysis to ensure compliance with environmental standards Contribute to all aspects of roadway drainage design including culverts, bridges, ditches, BMPs, and watershed studies Conduct site visits and fieldwork to confirm existing conditions Develop hydrologic and hydraulic improvements for roadway and drainage projects Collaborate with multidisciplinary teams, sub-consultants, and permitting agencies Extract and analyze data from MicroStation, GEOPAK Drainage, HEC-RAS, and related tools Provide technical guidance and mentorship to junior staff Manage project scopes, schedules, and budgets when assigned Qualifications Bachelors or Masters degree in Civil Engineering or related discipline Professional Engineer (PE) license preferred Minimum of 5 years of hydraulic design experience, ideally with NCDOT projects Proficiency with MicroStation, GEOPAK Drainage, and HEC-RAS Working knowledge of NCDOT Guidelines for Drainage Studies and Hydraulic Design and FHWA Hydraulic Design Manual Soil erosion and sediment control design experience Familiarity with OpenRoads Designer and SUDA is a plus Strong written and verbal communication skills with the ability to work collaboratively in a team environment Must be authorized to work in the U.S. (sponsorship not available) Why This Is a Great Opportunity Join a top-ranked engineering firm with over 30 years of growth and recognition Relocation assistance available for qualified candidates Opportunity to work on diverse transportation and drainage projects with state-wide impact Professional growth potential, including project management opportunities and leadership development Comprehensive benefits package including health, vision, dental, life insurance, PTO, retirement plan, and paid holidays. JPC-384 Job Type: Full-time Benefits: Dental insurance Health insurance Life insurance Paid time off Relocation assistance Retirement plan Vision insurance

We are seeking a motivated and detail-oriented Project Engineer to join our dynamic team. The ideal candidate will play a pivotal role in overseeing various construction projects from inception to completion, ensuring that all aspects are executed efficiently and effectively. This position requires strong project management skills, proficiency in construction management software, and a solid understanding of engineering principles. Your responsibilities in this role: Maintain contract documents, posting and distribution of addenda, field orders, RFI's and Requests for Proposal Control shop drawings and submittals to review for contract compliance and establish a routing process to ensure that all involved in the work are kept informed Lead the project QC including all deviation reports, pre-pour inspections, completion lists, testing reports, etc. and actively update the Project Manager and Superintendent Coordinate Requests for Information to and from architectural engineer, owner and other contractors and subcontractors Assist in assembling proposals and prepare owner change order requests Maintain “As-Built” drawings; prepare final close out sets Secure operations manuals guarantee and warranties; assist in project close-out What you need to qualify: 1-3 years of relative job experience in commercial construction highly preferred BS degree in Construction Management or Engineering Thorough understanding of industry practices and standards Strong foundation in database management (ex. Excel) and related industry software (ex. Bluebeam) Highly collaborative work style with excellent communication skills Join us as we build innovative solutions in the construction industry! LRT is proud to be an Equal Opportunity Employer and member of the Drug Free Safety Program.

Insight Global is seeking a Senior Utilities Engineer to work for one of our largest pharmaceutical manufacturing companies in the Sanford, NC area. This individual will be responsible for providing technical and engineering expertise to maximize site equipment availability, reliability and reduce maintenance costs through system and process continuous improvement, i.e., LEAN principles and Continuous Improvement methodology. Develop and implement strategies and methods that improve preventive maintenance processes and procedures resulting in enhanced equipment performance. Technically support all aspects of maintenance operations while ensuring compliance with SOPs, cGMPs, safety procedures, quality standards, OSHA standards, other regulatory agency standards, good maintenance practices, and corporate initiatives. Responsibilities: Engineering SME responsible for regulated utility (Clean Steam, WFI and Compressed Gas) generation and distribution. Work closely with manufacturing personnel/other departments to resolve manufacturing issues and implement process improvements. Act as a liaison between maintenance and manufacturing personnel for corrective work and utilities support. Support implementation of process equipment upgrades and optimization. Capital projects for new bioprocess equipment purchase, installation and facility integration. Trouble shooting issues with utility support of process equipment. Coordination with other plant engineers, validation and automation colleagues in support of manufacturing operations Subject matter expert for adherence to all regulatory requirements pertaining to regulated utilities Perform equipment evaluations to determine and justify new equipment, equipment replacement and incorporate into capital plan. Review equipment for condition, performance, and maintenance history; assessing the liability caused by marginal equipment performance; assessing the cost and value of overhauling or upgrading to the cost of replacement; and creating justifications for capital replacements. Recommending and presenting capital equipment purchases to facilitate campus growth and to maximize equipment reliability. Qualifications A minimum of a BS degree + 15 years of relevant experience Direct knowledge and extensive experience in project management and regulated utilities (RO, WFI, clean steam, compressed gases, etc.) within a biopharmaceutical or pharmaceutical cGMP environment is required. Plusses: Professional Engineer or Certified Project Management certification preferred. Experience with FDA and EU licensing and inspection is beneficial. Familiarity with manufacturing and/or utilities equipment and operations is desired. Experience in both Global Engineering and site level engineering is strongly preferred

Are you a problem solver looking for a hands-on internship position with a market-leading company that will help develop your career and reward you intellectually and professionally? Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible™. Learn more at ************** and on LinkedIn and Twitter (X). At ADI, you will learn from the brightest minds who are here to help you grow and succeed. During your internship, you will make an impact through work on meaningful projects alongside a team of experts. Collaborating with colleagues in an environment of respect and responsibility, you will create connections that will become a part of your professional network. ADI's culture values aligned goals, work-life balance, continuous and life-long learning opportunities, and shared rewards. The internship program features various lunch-and-learn topics and social events with other interns and full-time employees. At ADI, our goal is to develop our interns so they are the first to be considered for full-time roles. Apply now for the opportunity to grow your career and help innovate ahead of what's possible. About the Role We are seeking a motivated intern to contribute to cutting-edge analog and mixed-signal design and automation initiatives. This role offers hands-on experience in circuit design, machine learning applications, and design flow optimization, working closely with experienced engineers in a collaborative environment. Responsibilities Develop and validate machine learning models for analog design automation. Analyze design data, simulation results, and layout metrics to extract insights. Collaborate with design engineers to identify challenges and propose automation strategies. Support tool development and scripting for design flow enhancements. Perform analog and mixed-signal circuit analysis, design, simulation, and verification in advanced CMOS nodes. Optimize physical design in collaboration with layout engineers. Conduct lab evaluation and debug of pipeline ADCs; assist with test equipment setup and maintenance. Document research findings and present progress to the team. Minimum Qualifications Currently enrolled in an Undergraduate, Masters, or PhD program: in Electrical Engineering, Computer Engineering, or a related field. Coursework in Analog IC Design; familiarity with ADC architectures is a plus. Understanding of transistor-level design and simulation using Cadence and SPICE-type tools. Knowledge of IC physical design and exposure to sub-micron process nodes. Familiarity with lab equipment such as signal generators and spectrum analyzers. Preferred Qualifications Strong foundation in analog circuit design and mixed-signal systems. Experience with Python and machine learning libraries (e.g., scikit-learn, PyTorch). Familiarity with EDA tools such as Cadence Virtuoso. Exposure to design automation concepts and analog layout-aware design. Experience with data analysis tools (e.g., MATLAB, pandas). Knowledge of ADC architectures, high-speed analog design, clocking, and calibration techniques. Strong communication skills and initiative in exploring interdisciplinary challenges. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: Internship/CooperativeRequired Travel: NoThe expected wage range for a new hire into this position is $22 to $41. Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors.

Job Description RFA Engineering (*************** is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking a growth-oriented candidate to become an integral part of our engineering team. The selected candidate will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's world-class engineering and manufacturing facility. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Mechanical Design Engineer Mechanical Design Engineer will be responsible for the concept and development of mechanical components and systems that may include plastic processes, castings, stampings, laser cut parts, and welding or bonding of components for lawn care equipment. Responsibilities Communication with suppliers and customers on product selection and integration Use of Creo and Windchill to support 3-D Modeling of components, sheet metal and possibly hydraulic or electrical routings. Creation and support of 2D drawings and specification documentation Work with manufacturing, product verification and validation, and suppliers to develop efficient and cost effective designs Compile and furnish necessary information (engineering decisions and reports of pertinent design analyses data) to document the design solution required for building of prototypes and adoption of the design with possible involvement of other functional engineers. Requirements Bachelor's of Science in Mechanical, Aerospace, or Agricultural Engineering or related degree Strong mechanical aptitude demonstrated through work experience or hobbies Excellent communication both written and verbal Demonstrated ability to meet deadlines and commitments Strong analytical, problem solving and troubleshooting skills Ability to thrive in a team environment Desired Attributes Experience in 3-D Modeling Software; Creo experience (Preferred) Previous experience with Windchill or PDMLink Strong understanding of GD&T Design experience or exposure to off-road mobile equipment Ability to address quality issues, determine root cause and drive to a corrective action Desire to work in an engineering environment focusing on robust & cost effective designs Visa sponsorship is NOT available for this position. Pay Range: $70,000-$120,000 - Commensurate with experience About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S. Competitive Benefits Health and Dental Insurance TelaDoc Healthiest You Supplemental Vision Insurance Company Paid Life Insurance Company Paid Long-Term Disability Short-term Disability Retirement Savings Account (Traditional 401k & Roth 401k) Flexible Spending Plan Dependent Care HSA for Medical Expenses Bonus Plan (Exempt Employees Only) Paid Time Off (PTO) Paid Holidays Bereavement Leave Employee Assistance Programs (EAP) Education Assistance Equal Opportunity and Veteran Friendly #ZR

Description: About Baker Thermal Baker Thermal Solutions offers an unmatched breadth of industrial bakery equipment with system solutions executed worldwide. We have a full range of aftermarket services from parts and inspections to on-site rebuilds for equipment with over 100 years of history. Becoming a part of the Middleby Bakery Group in 2012 has strengthened our qualification in designing and supplying complete systems to produce many types of baked products. Working with our sister companies and allied equipment partners, Baker Thermal Solutions can supply complete turnkey projects. Job Description: The Mechanical Design Engineer is responsible for designing and developing mechanical systems and components for industrial equipment. The incumbent will be responsible for the design and development of new machines as well as upgrading and retrofitting existing equipment. This role involves creating innovative solutions, preparing detailed technical drawings, and collaborating with cross-functional teams to ensure designs meet performance, safety, and cost requirements. This position reports directly to the Engineering Manager and requires the candidate to lead design projects from beginning to end. Essential Duties/Principal Responsibilities: Perform mechanical machine design tasks including, but not limited to, sizing and selecting mechanical components, generating bills of materials (BOMs), and ensure the accuracy of maintenance and technical documentation (i.e. manuals). Design mechanical systems and products for the baking industry Create and refine mechanical designs for new machines and retrofit existing equipment. Develop 3D models and detailed drawings using CAD software. Collaborate with the design team to create design sketches, layouts, and plans. Produce specifications for products and chooses raw materials and components to be used in production. Provide technical guidance on manufacturability, machining processes, welding techniques, and assembly procedures. Construct models and prototypes to evaluate design performance and functionality. Analyze test data and compare results with similar designs. Generate Bills of Materials (BOMs) and maintain accurate technical documentation. Perform calculations, simulations (FEA/CFD), and prototype evaluations to validate design performance. Ensure designs adhere to industry standards, safety regulations, and company quality protocols. Performs additional related duties assigned to support project and departmental goals. Requirements: Minimum Qualifications: Education, Experience, Skills, License/Certification: Bachelor's degree in mechanical engineering required; master's degree preferred. Five years of related experience preferred. Knowledge of 3D CAD software (Inventor Preferred) and MS Office software. Strong understanding of mechanical principles, materials, and manufacturing processes. Excellent problem-solving and creative design skills. Ability to manage multiple projects and meet deadlines. Ability to travel as required (~25%). Willingness to collaborate with fellow coworkers to provide the best solution possible. Excellent organizational skills and attention to detail. Preferred Experience: 2-5 years in mechanical design for industrial machinery or related sectors. Familiarity with thermal systems, fluid mechanics, and automation equipment.

Job DescriptionSalary: ****Must be in commuting distance to Garner, North Carolina.**** About Us We are an established, employee-owned (ESOP) manufacturing company specializing in poultry chiller systems and related process equipment used in high-volume food processing environments. Our work is highly collaborative across engineering, fabrication, field service, and project management. We value practical problem-solving, accountability, and supporting each other in delivering reliable systems to our customers. Position Summary The Mechanical Designer will work as a key contributor on our Engineering team to develop and maintain manufacturing drawings, equipment layouts, assemblies, and installation details for our poultry chiller systems and associated equipment. This role is both office and field oriented. The candidate will spend most of their time developing 3D mechanical models and drawings, while also participating in site visits for field measurements, equipment documentation, and occasional 3D LiDAR scanning. This is a strong role for someone who enjoys hands-on, real-world engineering and the technical details required to build and install equipment that works right the first time. Key Responsibilities Create and maintain 3D models and 2D fabrication drawings using Autodesk Inventor (Similar experience, e.g. SolidWorks, is acceptable with willingness to transition). Develop complete mechanical drawing packages including assemblies, detailed part prints, weldment drawings, and bill of materials (BOMs). Work directly with shop personnel (welders, fabricators, machinists) to verify manufacturability, ease of fabrication, and clarity of documentation. Conduct field investigations at poultry processing facilities to gather dimensions, document existing equipment, and assess installation constraints. Assist with or perform 3D LiDAR scanning of existing equipment and environments (experience preferred, but training available). Support installation teams with drawing clarifications and technical detail during project execution. Participate in internal reviews to ensure accuracy, quality, and adherence to company standards. Maintain structured drawing and document control practices. Required Qualifications Bachelors degree in Mechanical Engineering or related field, OR proven equivalent technical experience in mechanical design. 37 years of mechanical design experience in a manufacturing or industrial environment. Proficiency in 3D parametric CAD software (Inventor, SolidWorks, or similar). Strong understanding of fabrication processes including welding, machining, and sheet metal manufacturing. Ability to read and apply weld symbols, tolerancing standards, and mechanical detail drawings. Ability to implement a systematic, data-driven approach to investigate and resolve significant or recurring problems within an organization's processes, products or systems. Comfortable working in food processing plants, mechanical rooms, and shop floors. Comfortable engaging and communicating with customers in similar industries. Willingness to travel 12 times per month for short domestic trips (typically 13 days). Preferred Qualifications Experience using FARO or similar 3D LiDAR scanners and processing point clouds. Familiarity with Autodesk Vault or other PDM systems. Understanding of stainless steel fabrication and sanitary equipment design. Experience with equipment layout in constrained or retrofit environments. Experience with root cause techniques and analysis. Work Environment Approximately 75% office / 25% field (which may include plant environments with elevated temperatures, humidity, and wet conditions). Requires ability to climb, crawl, or maneuver around installed equipment for dimension gathering. Standard PPE provided and required during field visits. Benefits: Health/Dental/Vision Insurance Vacation Time Sick Time Life Insurance Long Term Disability ESOP (Employee Stock Ownership Plan) Must be authorized to work in the U.S. We look forward to welcoming a new member to our team!

Mechanical Designer At Salas O'Brien we tell our clients that we're engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That's why we're committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career-and they'll receive great total rewards along the way. About Us: Founded in 1975, Salas O'Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow's requirements are today's opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Job Summary: The ideal candidate will assist in the design, analysis, and testing of mechanical components and systems, contributing to the development of innovative products and solutions. This role provides an excellent opportunity for professional growth and hands-on experience in a dynamic environment. Responsibilities: Design and Development: Assist in the design and development of mechanical components, systems, and products using Revit software Participate in brainstorming sessions and contribute to innovative engineering solutions. Collaborate with cross-functional teams to ensure design requirements are met. Analysis and Testing: Conduct basic engineering calculations and analysis (e.g., heat loads, air flows) to ensure the integrity and performance of designs. Support the troubleshooting and optimization of mechanical systems. Documentation and Reporting: Prepare and maintain detailed engineering documentation, including design specifications, plans, and reports. Assist in the preparation of technical presentations and project status updates. Project Support: Collaborate with senior engineers and project managers to ensure timely completion of project milestones. Provide support in the selection and evaluation of materials, components, and equipment processes. Assist in quality control and assurance processes during production. Qualifications and Experience: Educational Background: Bachelor's degree in Mechanical Engineering Experience: 2+ years working in the consulting engineering industry Technical Skills: Proficiency in Revit software. Basic understanding of mechanical engineering principles, including mechanics, thermodynamics, and materials science. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Willingness to learn and adapt in a fast-paced environment. Familiarity with industry standards and codes (e.g., ASHRAE, IMC) preferred Basic knowledge of HVAC Design preferred Adaptability: Flexibility and willingness to work on various projects and tasks, embracing new challenges with enthusiasm. Initiative: Demonstrated ability to work independently and take initiative to drive projects forward. Location: Raleigh, NC Travel: Occasional to project sites Benefits: This role is also eligible for performance-based bonuses and a comprehensive U.S. based benefits package, including: Medical, dental, and vision insurance 401(k) with company match Paid time off and company holidays Wellness programs and employee assistance resources Professional development support For more information, visit our full benefits overview here. Equal Opportunity Employment Statement Salas O'Brien provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O'Brien will accommodate the disability-related needs of applicants as required by law.

CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,400 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description The Mechanical Designer I performs their job functions under the supervision of a project's Engineer-of-Record. The Mechanical Designer II works on matters of basic to intermediate complexity under the responsible charge of the registered Mechanical Engineer. This role is expected to work closely with other architects, engineers, and designers, as well as other internal and external team members to ensure a coordinated, constructible, and complete design. Tasks include assisting with 3D modeling and design, conducting field investigations, performing red-to-black markup/review tasks, and producing discipline deliverables. Responsibilities * Interface with client and external partners preferred * Travel as required for client development and project execution preferred * Work on a variety of mechanical assignments supporting all phases of design including initial planning, feasibility, scope and concept development, detailed design, construction documentation, and construction administration * Assist with 3D modeling and design, conducting field investigations, performing red-to-black markup/review tasks, and producing discipline deliverables Qualifications Minimum Qualifications * Applicable Associate degree or technical trade school certification * 0 to 3 years of experience required including field experience in either a design or construction capacity Additional Qualifications * Basic proficiency in Revit and AutoCAD MEP is preferred * Basic proficiency in Microsoft Office preferred * Experience with implementing fundamental design aspects of HVAC, mechanical utility, and piping system design preferred * Understanding of the applicable building codes, technical and design aspects of CRB's market areas, and will be expected to work closely with architectural, engineering, and construction staff members to ensure assignments are completed accurately and efficiently Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Title : Engineer I | Pay rate: $35/hr on W2 Duration : 3 months contract (On-Site) with possibility of extension. Candidate to make $35/hr 8-5 M-F 1-3 years Experience in role. Performs conventional, less complex engineering assignments that may involve equipment or product design, testing of materials, preparation of specifications, process studies, or research investigations. Duties include analysis of designs, cost reductions, implementing quality/reliability improvements and making recommendations for product applications along with testing and evaluating Eaton products and accessories and parts, etc. Position requires a B.S. degree in engineering with normally one to three years of related experience. - Qualifications Bachelors Degree Additional Information All your information will be kept confidential according to EEO guidelines.

About Baker Thermal Baker Thermal Solutions offers an unmatched breadth of industrial bakery equipment with system solutions executed worldwide. We have a full range of aftermarket services from parts and inspections to on-site rebuilds for equipment with over 100 years of history. Becoming a part of the Middleby Bakery Group in 2012 has strengthened our qualification in designing and supplying complete systems to produce many types of baked products. Working with our sister companies and allied equipment partners, Baker Thermal Solutions can supply complete turnkey projects. Job Description: The Mechanical Design Engineer is responsible for designing and developing mechanical systems and components for industrial equipment. The incumbent will be responsible for the design and development of new machines as well as upgrading and retrofitting existing equipment. This role involves creating innovative solutions, preparing detailed technical drawings, and collaborating with cross-functional teams to ensure designs meet performance, safety, and cost requirements. This position reports directly to the Engineering Manager and requires the candidate to lead design projects from beginning to end. Essential Duties/Principal Responsibilities: * Perform mechanical machine design tasks including, but not limited to, sizing and selecting mechanical components, generating bills of materials (BOMs), and ensure the accuracy of maintenance and technical documentation (i.e. manuals). * Design mechanical systems and products for the baking industry * Create and refine mechanical designs for new machines and retrofit existing equipment. * Develop 3D models and detailed drawings using CAD software. * Collaborate with the design team to create design sketches, layouts, and plans. * Produce specifications for products and chooses raw materials and components to be used in production. * Provide technical guidance on manufacturability, machining processes, welding techniques, and assembly procedures. * Construct models and prototypes to evaluate design performance and functionality. * Analyze test data and compare results with similar designs. * Generate Bills of Materials (BOMs) and maintain accurate technical documentation. * Perform calculations, simulations (FEA/CFD), and prototype evaluations to validate design performance. * Ensure designs adhere to industry standards, safety regulations, and company quality protocols. * Performs additional related duties assigned to support project and departmental goals. Minimum Qualifications: Education, Experience, Skills, License/Certification: * Bachelor's degree in mechanical engineering required; master's degree preferred. * Five years of related experience preferred. * Knowledge of 3D CAD software (Inventor Preferred) and MS Office software. * Strong understanding of mechanical principles, materials, and manufacturing processes. * Excellent problem-solving and creative design skills. * Ability to manage multiple projects and meet deadlines. * Ability to travel as required (~25%). * Willingness to collaborate with fellow coworkers to provide the best solution possible. * Excellent organizational skills and attention to detail. Preferred Experience: * 2-5 years in mechanical design for industrial machinery or related sectors. * Familiarity with thermal systems, fluid mechanics, and automation equipment.

Work in a fast-paced startup environment, as part of a top-notch team. Take pride in giving the world an excellent product that creates life-changing medical devices. This young company is growing and there will be opportunities to take on new responsibilities and grow into new roles. Requirements BS in engineering with at least 2 years of machine design engineering experience Experience that shows you can design and build complex machines (such as 3D printers). This may include professional experience and/or significant hobbies. To put it simply, proven ability to make things work. A broad skill set in mechanical design, engineering, and physics. Ability to spec out and build systems using motors, controllers and wiring, sensors, pumps, pneumatics, etc. AutoCAD experience Experience with tools. Specific expertise in mechanical design, CAD, and DFM is required. Ability to work as part of a team Communication skills Project management skills are a plus. Responsibilities Design, build, and improve 3D printers and other manufacturing equipment that include mechanical, optical, electrical, software, fluids, pneumatics, etc Develop and conduct well-designed experiments (on 3D printers and related manufacturing/processing equipment) to characterize and improve the performance of the process. Develop process and design documentation that will form the basis for the production of additional machines as well as quality assurance systems for existing machines. Why work here? Stock options... Share in the success by being a part owner in the company! The company values diversity, inclusion, trust, strong communication, great teamwork, and work-life balance. They are building something amazing that will unlock a wave of innovation in medical technology. 100% of Health premiums paid for employee Very little travel PTO and paid holidays 401k match up to 3.5% #ZR

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represent a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Applications Design Engineer-Principal Job Description: * Provide technical support to key customers in base station/ broadcasting/ Microwave RF Power areas both OEM accounts and distribution channel. * Design and optimize high performance RF Power amplifier device/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Design and optimize high performance RF Power amplifier demo board/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Work with device design team to design or optimize evaluation circuit to initiate meaningful design-in opportunity in key customers or verify the feasibility on innovation concept. * Manage the account on technical interface. Build and maintain relationships with development crews at customer sites. * Help on product quality complaint description and quality report explanation from tech. point of view. * Technically drive marketing activities, including seminar/exhibition/conference, collect market feedback and give suggestions to Product Line on NPD. * Manage lab facilities like DPD system/Loadpull system etc. Qualifications: * Bachelor/master's degree in electronic engineering with the focus on RF. * 5+ years experiences in RF design or applications, experience in high power amplifier is preferred. * Expert in RF laboratory equipment and measurement techniques. * Expert on the design of high-power RF circuits for Power Amplifier applications. * Highly knowledgeable on modelling techniques for non-linear systems, familiar with simulation tool like ADS/Microwave office/Momentum. * Highly knowledgeable on the physics of device operation. * Good understanding of RF circuit techniques for performance enhancements such as digital pre-distortion and Doherty. * Excellent problem-solving skills. * Have a proactive, implementation-focused approach. * Excellent verbal, written and presentation skills. Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. This position is eligible to receive restricted stock unit (RSU) awards and cash bonuses, solely at MACOM's discretion, subject to individual and company performance. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs. Benefits: This position offers a comprehensive benefits package including but not limited to: * Health, dental, and vision insurance. * Employer-sponsored 401(k) plan. * Paid time off. * Professional development opportunities.

BACKGROUND restor3d enables surgeons to improve the reconstruction and repair of the human body through 3D printed metal implants and polymeric surgical instruments with enhanced anatomical fit and superior integrative properties. We leverage expertise and experience in 3D printing of key biomedical materials spanning a wide range of properties, seeking to improve medical device solutions. PRINCIPAL RESPONSIBLITIES Principal responsibilities for the position include the following. Other duties may be assigned as necessary. Design Custom Orthopedic Implants Analyze CT scan data and translate into 3D models Produce surgical simulations (resections, alignments, etc.) Design implants based on surgeon input and measurements with quick turnaround times Design implant trials, cutting guides, or other instrumentation needed for implant placement Draft Project Documentation Produce surgical guides with anatomy, implant variations, cutting guides, and trials Determine inspection criteria and mechanical strength analysis Produce accurate quality documentation relevant for each case Design for Manufacturing Work closely with operations to ensure manufacturability of design work Modify designs for printability based on the type of printer to be used(FDM, SLA, DLP, SLS) Clinical Representative Attend orthopedic cases and verbally assist in surgical process and custom device related surgical steps EDUCATION Bachelor of Science in an engineering or equivalent discipline (mechanical, biomedical, etc.) PREFERED EXPERIENCE Extensive experience in 3D modeling (Solidworks, ProE, 3-matic, Fusion360, Rhino, etc.) Independent worker willing to learn and develop necessary design, manufacturing, and software skills though guided training Self-starter willing to take ownership of assigned cases Ability to work flexible hours if needed ADDITIONAL QUALIFICATIONS Understanding of human anatomy (through coursework or training) Experience with design and manufacturing of medical implants (ISO 13485 and FDA 21 CFR 820) Experience working under a quality management system for medical devices or other regulated design fields Orthopedic implant design and development experience Experience with custom order engineering Experience with 3D printing restor3d is an equal opportunity employer

Job Title: Facilities Engineer Duration: 12+ Months Notes: Fully Onsite Open for candidates with experience with project engineering and coordination experience Job Details: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for facilities related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for facilities system, perform quality and overall facilities walkdowns. Perform field evaluations of existing systems and provide engineering design recommendations. Skills: self-started, ability to communicate effective Top 3 Must Have Skill Sets: 1. Ability to work well under pressure 2. Facilities knowledge and experience 3. Great communication skills 4. Proactive 5. Willingness to learn new experiences

Responsible for providing technical and engineering expertise to maximize site equipment availability, reliability and reduce maintenance costs through system and process continuous improvement, i.e., LEAN principles and Continuous Improvement methodology. Develop and implement strategies and methods that improve preventive maintenance processes and procedures resulting in enhanced equipment performance. Technically support all aspects of maintenance operations while ensuring compliance with SOPs, cGMPs, safety procedures, quality standards, OSHA standards, other regulatory agency standards, good maintenance practices, and corporate initiatives. A summary of responsibilities is as follows: Engineering SME responsible for regulated utility (Clean Steam, WFI and Compressed Gas) generation and distribution. Work closely with manufacturing personnel/other departments to resolve manufacturing issues and implement process improvements. Act as a liaison between maintenance and manufacturing personnel for corrective work and utilities support. Support implementation of process equipment upgrades and optimization. Capital projects for new bioprocess equipment purchase, installation and facility integration. Trouble shooting issues with utility support of process equipment. Coordination with other plant engineers, validation and automation colleagues in support of manufacturing operations. Perform equipment evaluations to determine and justify new equipment, equipment replacement and incorporate into capital plan. Equipment replacement should be identified as part of a site or facility Master Plan. Review equipment for condition, performance, and maintenance history; assessing the liability caused by marginal equipment performance; assessing the cost and value of overhauling or upgrading to the cost of replacement; and creating justifications for capital replacements. Equipment evaluations should include risk assessments to determine if adequate redundancy exists to support operations in the event of catastrophic equipment failure. Recommends and presents capital equipment purchases to facilitate campus growth and to maximize equipment reliability. Provide subject matter expertise for PM task-list development and revisions. Assists RCM analysis team to determine PM and part strategies. Based on expertise, history, and RCM analysis results. Qualifications A minimum of a BS degree + 15 years of relevant experience Direct knowledge and extensive experience in project management and regulated utilities (RO, WFI, clean steam, compressed gases, etc.) within a biopharmaceutical or pharmaceutical cGMP environment is required. Professional Engineer or Certified Project Management certification preferred. Experience with FDA and EU licensing and inspection is beneficial. Familiarity with manufacturing and/or utilities equipment and operations is desired. Experience in both Global Engineering and site level engineering is strongly preferred

Are you a problem solver looking for a hands-on internship position with a market-leading company that will help develop your career and reward you intellectually and professionally? Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible™. Learn more at ************** and on LinkedIn and Twitter (X). At ADI, you will learn from the brightest minds who are here to help you grow and succeed. During your internship, you will make an impact through work on meaningful projects alongside a team of experts. Collaborating with colleagues in an environment of respect and responsibility, you will create connections that will become a part of your professional network. ADI's culture values aligned goals, work-life balance, continuous and life-long learning opportunities, and shared rewards. The internship program features various lunch-and-learn topics and social events with other interns and full-time employees. At ADI, our goal is to develop our interns so they are the first to be considered for full-time roles. Apply now for the opportunity to grow your career and help innovate ahead of what's possible. Digital Design Engineer Intern As a Digital Design Engineer Intern at Analog Devices, you'll gain practical experience in the design, simulation, and verification of digital integrated circuits. You'll work alongside experienced engineers to develop digital models, perform FPGA prototyping, and conduct timing analysis-all while contributing to innovative projects that shape the future of electronics. This internship is an excellent opportunity for students pursuing an engineering degree to grow their technical skills, gain industry experience, and make meaningful contributions to ADI's product development. Key Responsibilities include, but are not limited to: Assist in the design and simulation of digital circuits using Verilog or VHDL Support RTL design and verification activities for digital modules and components Use digital modeling techniques to verify circuit functionality and performance Participate in FPGA prototyping and testing for rapid design validation Collaborate with senior engineers to identify and resolve design issues Contribute to static timing analysis and verification processes Document design work and test results according to team standards Minimum Qualifications Currently pursuing a Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field Entering Junior year or later Prior coursework or projects related to digital design Strong analytical and problem-solving skills Ability to work effectively in a team environment Why You'll Love Working at ADI At Analog Devices, you'll be part of a collaborative and innovative team that's shaping the future of technology. We offer a supportive environment focused on professional growth, competitive compensation and benefits, work-life balance, and the opportunity to work on cutting-edge projects that make a real impact on the world. You'll have access to continuous learning opportunities and mentorship from industry experts. Join us and help create the technologies that bridge the physical and digital worlds, making a tangible difference in how people live, work, and connect. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: Internship/CooperativeRequired Travel: NoSecurity Clearance required: No

****Must be in commuting distance to Garner, North Carolina.**** About Us We are an established, employee-owned (ESOP) manufacturing company specializing in poultry chiller systems and related process equipment used in high-volume food processing environments. Our work is highly collaborative across engineering, fabrication, field service, and project management. We value practical problem-solving, accountability, and supporting each other in delivering reliable systems to our customers. Position Summary The Mechanical Designer will work as a key contributor on our Engineering team to develop and maintain manufacturing drawings, equipment layouts, assemblies, and installation details for our poultry chiller systems and associated equipment. This role is both office and field oriented. The candidate will spend most of their time developing 3D mechanical models and drawings, while also participating in site visits for field measurements, equipment documentation, and occasional 3D LiDAR scanning. This is a strong role for someone who enjoys hands-on, real-world engineering and the technical details required to build and install equipment that works right the first time. Key Responsibilities Create and maintain 3D models and 2D fabrication drawings using Autodesk Inventor (Similar experience, e.g. SolidWorks, is acceptable with willingness to transition). Develop complete mechanical drawing packages including assemblies, detailed part prints, weldment drawings, and bill of materials (BOMs). Work directly with shop personnel (welders, fabricators, machinists) to verify manufacturability, ease of fabrication, and clarity of documentation. Conduct field investigations at poultry processing facilities to gather dimensions, document existing equipment, and assess installation constraints. Assist with or perform 3D LiDAR scanning of existing equipment and environments (experience preferred, but training available). Support installation teams with drawing clarifications and technical detail during project execution. Participate in internal reviews to ensure accuracy, quality, and adherence to company standards. Maintain structured drawing and document control practices. Required Qualifications Bachelor's degree in Mechanical Engineering or related field, OR proven equivalent technical experience in mechanical design. 3-7 years of mechanical design experience in a manufacturing or industrial environment. Proficiency in 3D parametric CAD software (Inventor, SolidWorks, or similar). Strong understanding of fabrication processes including welding, machining, and sheet metal manufacturing. Ability to read and apply weld symbols, tolerancing standards, and mechanical detail drawings. Ability to implement a systematic, data-driven approach to investigate and resolve significant or recurring problems within an organization's processes, products or systems. Comfortable working in food processing plants, mechanical rooms, and shop floors. Comfortable engaging and communicating with customers in similar industries. Willingness to travel 1-2 times per month for short domestic trips (typically 1-3 days). Preferred Qualifications Experience using FARO or similar 3D LiDAR scanners and processing point clouds. Familiarity with Autodesk Vault or other PDM systems. Understanding of stainless steel fabrication and sanitary equipment design. Experience with equipment layout in constrained or retrofit environments. Experience with root cause techniques and analysis. Work Environment Approximately 75% office / 25% field (which may include plant environments with elevated temperatures, humidity, and wet conditions). Requires ability to climb, crawl, or maneuver around installed equipment for dimension gathering. Standard PPE provided and required during field visits. Benefits: Health/Dental/Vision Insurance Vacation Time Sick Time Life Insurance Long Term Disability ESOP (Employee Stock Ownership Plan) Must be authorized to work in the U.S. We look forward to welcoming a new member to our team!