Mechanical engineer jobs in Grand Rapids, MN - 1,416 jobs

Loeffler Construction is looking for a full-time, experienced Project Engineer! Best Places to Work 2023 & 2025 - Minneapolis/St. Paul Business Journal Are you curious, hard-working, and like to make a difference? Loeffler is seeking a highly detailed individual to join the construction team. The Project Engineer is responsible for planning, coordinating, scheduling, as well as supervising, and monitoring on-site construction engineering activities for a project. Essential Duties and Responsibilities The Project Engineer is responsible for timely and accurate performance in fundamental, routine construction-related tasks for both project management and field construction activities. Depending on the size and/or scope of the project, the Project Engineer will assist the Project team with responsibilities including, but not limited to: Supporting the oversight and management of multiple projects from preconstruction through the closeout/warranty period Prepare detailed schedules (including Pre-Con, Procurement, Construction, and Close-out), and monitor and update schedules weekly. Utilize look-ahead schedules and collaborate with the team Anticipating client needs, documenting, and tracking progress with regular communication. Managing all project document control within Procore Prepare Agendas and run progress meetings, owner/architect meetings, and subcontractor pre-installation meetings. Accurately document discussions and distribute meeting minutes within 48 hours Process submittals and RFI's, and work with the Site Superintendent to determine tasks requiring prioritization Education Requires a bachelor's degree in Construction, Engineering, Architecture, or a related field preferred Skills, Abilities and Qualifications · Minimum of three (3+) years' experience in construction or a similar role preferred · Excellent interpersonal communication skills, attention to detail, and organizational skills · Working knowledge of Procore is desirable · Advanced knowledge of Microsoft Office Suite · OSHA 30 Hour Certification preferred Physical Demands and work environment The physical requirements listed here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits There is a generous benefit offering, including: Medical, Dental, Vision, STD/LTD, Life, PTO, 401k, just to name a few. To view a full description, visit: *****************************************

Join a dynamic team in Monticello! Doherty Staffing Solutions is partnering with a leading manufacturing company located in Monticello, MN. We are seeking candidates for a Sr. Manufacturing Engineer role. Compensation for this direct hire opportunity is $108,000-$120,000 per year, plus bonus potential, depending on skills and experience. Interested? Read below for more details! What you'll do as a Sr. Manufacturing Engineer: Review customer specifications and models for manufacturability; recommend improvements when needed Interpret complex geometry, GD&T requirements, and CMM reports to monitor processes Lead automation projects from concept to implementation Apply problem-solving methods to resolve design and manufacturing issues Conduct cycle time evaluations and lead tooling reviews with suppliers Perform PFMEA risk analyses and implement error-proofing solutions Utilize CAD/CAM systems for product and process design What you need to be a Sr. Manufacturing Engineer: B.S. in Engineering or technical degree (Machining, CAD/CAM, Automation) preferred; equivalent experience considered CNC machining experience required 3D CAD/CAM proficiency required; automation experience preferred Skilled in MS Excel and Word Ability to manage shifting priorities and complete projects successfully Strong communication (verbal, written, presentation) Detail-oriented with excellent planning and organizational skills Initiative and ability to work independently and collaboratively Problem-solving and continuous improvement mindset Technical expertise in CNC machining, CAD/CAM, and automation systems #NewCareerByDoherty What are you waiting for? Apply today! Click APPLY NOW to complete our mobile-friendly, online application. For questions or additional information about the Sr. Manufacturing Engineer roles, please contact our Doherty recruiter at **************. Company benefits include health insurance (comprising medical, vision, and dental coverage), disability insurance, life insurance, and a 401(k) plan with matching contributions, as well as paid time off and paid holidays.

You'll play a key role in the design and development of custom crushing equipment from concept to manufacturing. This role offers the opportunity to get hands-on involvement in design analysis, testing, prototyping, and cross-team collaboration -offering comprehensive engineering involvement in the product life cycle and impact on the aggregate industry. Key Responsibilities Coordinate product design and development for crushing equipment used in processing bulk material and aggregates Design and detail custom crushing equipment Perform design analysis for components Create drawings and bills of material that are accurate and contain all information required by production Lead product development projects Perform testing and prototyping of new products Evaluate and implement design changes Provide support to sales and service teams Other duties as assigned Employee Benefits Competitive Pay: Weekly paychecks plus the chance to earn $100 cash bonuses Comprehensive Benefits: Health, dental, vision, life, and disability insurance Retirement Plans: 401K with a 5% company match Professional Growth: In-house training in Inventor, AutoCAD, RISA 3D software Collaborative Environment: Work with a dynamic team where innovation and creativity are key Work-Life Balance: Flexible work schedules available Qualifications Bachelor's degree in Mechanical Engineering or related education Applicable experience in Designing cone crushers, jaw crushers, or impact crushers is preferred Experience in the field with commissioning equipment and troubleshooting is preferred FEA experience

Our client is seeking a Senior SAP ISU BTP Engineer to join their team! This position is located in Minneapolis, MN or Denver, CO. Support enterprise integrations to existing applications using standard integration patterns that reinforce strong system boundaries and interfaces Reverse engineer and modernize existing ACE based integration flows to align with RISE and BTP patterns Troubleshoot interface errors and support testing cycles Partner with technical architects to ensure alignment with SAP standards Lead platform environment engineering across multiple transformation lifecycle activities such as: staging, automation, monitoring and migration Design and implement infrastructure provisioning processes, automation pipelines and platform services with independence Partner with architects and technical leads to design and optimize cross platform integration and compliance requirements Diagnose complex infrastructure and application issues and drive resolution across test, QA and non-production environments Lead conversion, migration and performance tuning efforts across multiple environments during key program phases Ensure cybersecurity and regulatory controls are appropriately implemented Recommend remediation options as relevant Maintain and enhance environment documentation, engineering standards and reusable patterns for the program Desired Skills/Experience: Bachelor's degree in Computer Science, Engineering or equivalent experience 7+ years of experience in platform engineering, DevOps, infrastructure or related domain Strong technical proficiency and ability to independently solve complex engineering problems Demonstrated experience designing scalable, secure environments Strong cross functional communication and collaboration skills Hands on SAP BTP and ISU experience, utilities preferred Strong integration development skills Benefits: Medical, Dental, & Vision Insurance Plans Employee-Owned Profit Sharing (ESOP) 401K offered The approximate pay range for this position is between $98.00 and $140.00. Please note that the pay range provided is a good faith estimate. Final compensation may vary based on factors including but not limited to background, knowledge, skills, and location. We comply with local wage minimums.

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman Defense Systems has an exceptional opportunity for an experienced Mechanical Engineer to support our Weapons Systems - Armament site in Plymouth, MN. We are a leading producer of medium and large-caliber tactical and training ammunition for U.S. and allied militaries. Northrop Grumman is at the forefront of developing new, advanced ammunition types that include armor penetration, airbursting, proximity-fuzed and guided munitions to enhance lethality and overmatch on the battlefield. Position Overview This position provides mechanical and production engineering support for development and fabrication of medium caliber ammunition. In general, as a member of an integrated product team, you will be providing mechanical engineering support and work direction to distributed manufacturing and test locations, investigating and solving design and manufacturing issues, developing and documenting manufacturing processes, coordinating efforts between internal functional groups, supporting manufacturing and ammunition testing, supporting communications with our customers, and providing support and oversight to material suppliers. This role will be focused on the mechanical design of the medium caliber ammunition being developed. Typical Duties (Including but not limited to) Conduct Failure Analysis and Corrective Actions to drive the rapid resolution of complex design issues. Provide mechanical design-to-production engineering support for the development of new and modification of existing medium caliber ammunition products Provide work direction and engineering support to our distributed manufacturing and test locations Assist in the resolution of complex manufacturing line process issues such as machining, metal finishing, painting, heat treating, general mechanical assembly, and test Research and evaluate commercially available tools and equipment to support manufacturing activities. Design and procure specialized tooling and fixtures. Develop new, and improve existing, manufacturing processes Develop task releases, get them approved and introduced into the manufacturing system Prepare for and support Build Readiness Reviews and Production Readiness Reviews Create test requests and support test readiness reviews Coordinate manufacturing efforts between internal functional disciplines including Engineering, Supply Chain, Quality, Manufacturing, and Test. As the responsible agent for the product Technical Data Package, support the creation and release of Engineering Changes (concept through final release). Provide Engineering disposition on tooling and gage changes from internal and external sources Provide Engineering disposition on non-conforming product from internal and external sources Provide Engineering approval on proposed process changes from internal and external sources Create, publish, review and maintain all necessary documentation required for new and existing manufacturing programs. Manufacturing work instructions Manufacturing bills of material and build lists TDP reviews for correctness and completeness Ensure appropriate documentation is in Configuration Management system Monitor In-Process Testing and Lot Acceptance Testing for compliance to performance specification requirements. Assist in the preparation of engineering and program proposals Assist in the preparation of and participate in customer meetings and program reviews Travel up to about 10% Basic Qualifications Bachelor of Science degree in Mechanical Engineering or similar STEM discipline plus 5 years of relevant experience in engineering. Or master's degree plus 3 years of relevant engineering experience. Ability to guide successful completion of significant tasks and provide some work direction, mentoring, and coordination of other technical team members. Some experience working and communicating with customers, program management, and engineering management Technical understanding of mechanical mechanisms, electromechanical mechanisms, manufacturing processes, metal fabrication, and standard assembly processes. Applies knowledge of engineering and scientific methods, theories and research techniques in the disciplined investigation and solution of technical problems. The person filling this position must be able to work with a wide variety of multi-discipline people, in remote settings, interact with them frequently, building strong trusting relationships. Experience and proficiency in working with multiple projects. Self-motivated to start and complete quality work Strong communication skills, written and verbal Strong computer skills in Microsoft Suite, including MS Project. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. U.S. Citizenship is required. Ability to obtain a U.S. government secret level security clearance As a responsible party to ATF, obtain coverage under Safe Explosive Act as employee possessor/responsible person upon starting. Desired Qualifications: Familiarity with metal coatings and heat treatments Familiarity and experience with energetic materials typically found in medium caliber ammunition Familiarity and experience with the manufacture and test of medium caliber ammunition Ability to read drawings with Geometric Dimensioning and Tolerancing Experience working at a site compliant with AS9100D, ISO 9001:2015, or equivalent Primary Level Salary Range: $98,900.00 - $148,300.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As a Mechanical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Mechanical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Mechanical Engineering co-ops and interns enter into the following positions: Area Refining Engineer/Project Engineers develop and use project management skills to create project scopes, estimates, and schedules. Once a project is developed and approved, you, as the project manager, will oversee the design effort and assist in the construction process. MPC will provide training and educational opportunities to help you develop your knowledge of other engineering disciplines. We are committed to developing engineers into professional project managers who can successfully manage projects of all sizes. Reliability Engineers support the refinery's Maintenance Department through design and development of equipment related improvements. Such improvements include root cause failure analysis, optimization of maintenance programs in rotating equipment (pumps, compressors, etc.), and troubleshooting fixed equipment (refinery pressure vessels, heat exchangers, piping systems, etc.). Reliability Engineers will also be continuously challenged to find new technology in design, materials and repair methods to achieve refinery goals of longer running times at lower costs. Qualifications: + Candidates must be majoring in Mechanical Engineering or Civil Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.92 per hour / MAX - $41.67 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00020137 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez CA Refinery, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Part time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

Ecolab is committed to rapidly accelerating our pace of digital innovation by helping our customers overcome real-world problems around water safety, energy conservation, food security and healthy environments. As part of this strategy, Ecolab is providing an exciting opportunity to join the Food & Beverage Division as a Principal Electrical Engineer. This is an in-office position (4-5 days a week, Minnesota location only), travel up to 25% The individual in this role will work collaboratively with RD&E, IT, Equipment and Connected Solutions team, Commercial Digital Solutions and Food & Beverage business teams to deliver digitally enabled customer facing solutions to better serve our customers, drive productivity, increase efficiency, improve sustainability, and ensure food safety. Responsibilities of this position include identifying global customer needs, capturing and clarifying application requirements, assessing technical feasibility, creating prototypes/proof of concepts, identifying or creating lead technologies to solve the issue at hand, managing development, executing field tests, creating specifications, training, creating technical documentation and performing technical design transfer. What you will do: Guide project teams and business teams through the development process Lead the technical design for the automation/equipment projects by working closely with the project teams Translate key customer requirements to technical design requirements Design, develop and implement solution strategies to meet customer and design requirements Execute new product development projects according to solid project plans and project management principles (scope, timeline, milestones and risk-based decision making) Create communication plans and maintain strong communication channels with global project teams, business stakeholders and development partners Negotiate project priorities, resources and budget with cross-functional leaders Act as primary interface between RD&E, IT, Equipment and Connected Solutions (ECS), Commercial Digital Solutions (CDS) and business teams Provide technical expertise and guidance on automation, sensors and digital development best practices Collaborate with technology delivery teams to ensure technical dependencies are prioritized Partner with sales and service teams to merchandise solutions and drive engagement / adoption Understand field and customer user experiences to be able to make informed decisions Create specifications and technical documents (assembly procedures, wiring diagrams, installation instructions, operation manuals, user guides, etc.) Build deployment plans to ensure installation, service and support resources are sufficient Liaise with business and technical support teams to transfer and manage knowledge Network with internal experts, technology partners and vendors to search for new and different approaches to solve customer problems Coordinate with technology anchor teams to research and investigate early innovation ideas Take personal ownership of employee safety standards and operate accordingly Guide new Product Development Phase Gate activities by seeking out global customer needs, understanding application requirements, and managing the development, field testing and global launch of new offerings. Minimum Qualifications Bachelor's degree in electrical engineering, mechanical engineering or related technical discipline 5+ years of experience working in research, development, engineering or digital / technology related environment. 2+ years multifaceted project management experience Problem solving and critical thinking skills are essential Effective oral and written communication skills, organizational skills and attention to detail Demonstrate situational awareness and conflict resolution Strong leadership presence with ability to influence and empower others Self-starter with strong initiative and personal accountability Naturally curious and willing to learn and adapt to new fast-changing technologies Preferred Qualifications PMP / PMI certification Lean Six Sigma certification Working knowledge of industrial systems/control systems PLC/Industrial protocol communication experience Experience working with designing sensors Experience with equipment design, creating and managing equipment specifications and manufacturing design transfer Experience with AutoCAD, SolidWorks, or other computer-aided design software Annual or Hourly Compensation Range The pay range for this position is $98,600.00 - $148,000.00. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: - Undergo additional background screens and/or drug/alcohol testing for customer credentialing. - Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website.

Job Description About Mesabi Metallics When you join the team at Mesabi Metallics, you become part of a pioneering group advancing sustainable mining practices and driving innovation in the iron ore industry. Our commitment extends to providing a safe work environment, supporting environmental stewardship and generating value for all stakeholders. You will be joining us at a pivotal moment in Minnesota's mining history: Mesabi Metallics' cutting-edge iron ore mining and pelletization project is currently under construction. Once completed, it will mark the first new mine and pellet plant in Minnesota in nearly 50 years. More importantly, you'll be immersed in a positive, supportive work environment that values your contributions and fosters your professional growth. Our culture is shaped by our core values which are sustainability, integrity, inclusivity, innovation, teamwork, determination and performance, and our employees are empowered to make a difference every day. At Mesabi Metallics, you are part of a legacy of excellence, playing a key role in shaping the future of global infrastructure and industry. Position Summary Mesabi Metallics is seeking a seasoned Mechanical Project Engineer with in-depth expertise in rotary and static equipment, responsible for supporting large-scale industrial projects in the steel industry, including iron ore mining, beneficiation, pelletization, and downstream iron & steel making. The incumbent manages the full project lifecycle of mechanical systems-from design through commissioning-ensuring reliability, cost-effectiveness, and strict adherence to industry standards and best practices. Job Responsibilities Plan, design, review, and oversee the engineering and installation of rotary equipment (e.g., kilns, ball mills, conveyors, fans, pumps, compressors, blowers) and static equipment (e.g., tanks, vessels, heat exchangers, ducting, structural supports). Prepare and review technical specifications, datasheets, P&IDs, and GA drawings for mechanical systems and equipment. Evaluate and approve vendor designs, fabrication drawings, and ensure materials and manufacturing comply with specifications and industry standards. Conduct mechanical equipment sizing, selection, and layout, ensuring proper integration into plant processes. Coordinate closely with civil, electrical, instrumentation, and automation teams to ensure seamless interface and integration. Participate in RFQ preparation, bid evaluation, vendor finalization, FATs, and quality control inspections. Support installation, alignment, testing, and commissioning of rotary and static equipment at site. Troubleshoot mechanical issues during construction and commissioning phases. Ensure compliance with relevant ASME, API, ASTM, and OSHA standards and company engineering practices. Prepare technical reports, progress updates, and ensure documentation accuracy. Collaborate with consultants, vendors, and contractors throughout the project lifecycle. Mentor junior engineers and contribute to continuous improvement initiatives. Skills and Qualifications 7 to 15 years of hands-on experience in rotary and static mechanical systems for heavy industries-preferably in steel, mining, or mineral processing sectors. Strong knowledge of mechanical design codes and standards (ASME, API, ANSI, ASTM, AISC). Proficient in mechanical engineering software such as AutoCAD, SolidWorks, PV Elite, Caesar II, Ansys or equivalent. Experience in EPC / EPCM project environments. Understanding of maintenance, reliability, and lifecycle management of rotary/static equipment. Excellent communication, coordination, and documentation skills. Proven experience managing multiple vendors, contractors, and site teams. Professional Engineer (PE) license or equivalent preferred. Knowledge of thermal and vibration analysis for rotary equipment. Familiarity with project scheduling software (e.g., MS Project, Primavera). Experience in energy optimization, process efficiency, and material handling systems. Exposure to root cause analysis (RCA), FMEA, and RCM practices. Education Bachelor's degree or Master's degree in Mechanical engineering or related field. Physical Requirements This position is a mixture of field work and office duties. Field work will be conducted daily throughout the year so exposure to the elements (rain, snow, cold, heat, etc) is to be expected. The office duties will require work in front of a laptop, desk, and phone. Salary Range: $120,000 - $150,000 annually, depending on experience and qualifications. Benefits: Health Insurance: Comprehensive medical and dental coverage with an HSA option. Retirement Plan: 401(k) with 6% company match. Lincoln STD, LTD, & Life Insurance: Coverage provided by Mesabi Metallics. Paid Time Off (PTO): 0-5 Years: 120 hours per year. 5-10 Years: 160 hours per year. 10+ Years: 200 hours per year. Plus 9 paid holidays. Mesabi Metallics Company LLC is an equal opportunity employer and values diversity in the workplace. We are committed to creating an inclusive environment where all employees feel valued, respected, and empowered to contribute to our success. Powered by JazzHR 1UBYBZgTwx

Define the future of aviation. Join Cirrus Aircraft's team to build the greatest transformation in aviation since the jet engine. certifiable flight technologies to bring simple and safe personal flight to the masses. The Advanced Development Group is a small and nimble team that researches, designs, and tests concepts using rapid, unconstrained set-based design methodologies. The scope of our projects ranges from feature development to end-to-end systems and proof of concept aircraft, spearheading the next products. Look no further, the future of aviation is here. Join our innovative company today. Duties and Responsibilities/Essential Functions * Conduct on-aircraft system integration and validation testing. * Performs fluid dynamics, aircraft performance, and stability and control. * Research, implement, and evaluate software algorithms. * Must be able to independently design and execute bench, ground, and flight tests, and analyze and present results. * Design, execute, and present trade studies pertaining to data, software, and network architecture. * Contribute towards overall architecture and strategy for the advanced flight systems. * Collaboration with electrical and mechanical engineering to achieve fully integrated systems will be required. * Experience with small multi-disciplinary teams is a plus. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Required Education and/or Experience: * Bachelors degree in Aerospace or Mechanical Engineering required. * 6-10 years' experience in a related field * Proficient in a professional environment developing MATLAB / Simulink control systems * Proficient in fluid dynamics, aircraft performance, and stability and control. * Proficient with engineering drawings, CAD software, and engineering configuration management. * Strong communication skills: Be able to concisely document and explain workflows and design choices. * Maintain clear documentation and collaborate with cross-functional teams to align data engineering tasks with broader project goals. * Comfortable in driving results under uncertainty during the earlier stages of development * Ability to work independently as well as part of a high functioning team Distinguishing Education and/or Experience: * Advanced degree in Aerospace or Electrical Engineering. * Experience generating system and simulation models. * Experience troubleshooting and implementing solutions for aerodynamic challenges such as drag, cooling, stability and control, and slow speed handling. * Experience with developmental flight testing. * Experience with physics-based 6DOF simulations. * Experience with configuration and layout of new aircraft. * Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces * Exposure to Part 23 and/or Part 25 federal regulations. Competencies To perform the job successfully, an individual should demonstrate the following competencies: * Directs Work: Provides direction, delegates, and removes obstacles to get work done. * Situational Adaptability: Adapts approach and demeanor in real time to match shifting demands of different situations. * Manages Complexity: Makes sense of complex, high quantity, and sometimes, contradictory information to effectively solve problems. * Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Our Benefits: Cirrus provides a range of exciting benefits, including: * 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting. * Employer-Paid Coverages: Group term life, short- and long-term disability insurance. * Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options. * Free Health Tracking: With rewards for meeting health goals. * Generous PTO: 160 hours accrued within the first year. * Employee Referral Bonus: For referring talented candidates. * Career Development: Tuition reimbursement and professional growth opportunities. * Exclusive Discounts: Access to partner and marketplace discounts. * Community & Engagement: Company and employee clubs at various locations. These benefits are designed to support your well-being, growth, and enjoyment at Cirrus! Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

Horton, Inc. has an opening for a Electro-Mechanical Test Engineer I to work at our Roseville, MN location. This job is onsite Monday-Friday. With general guidance from engineering management, supports the test programs for new product design and/or existing product development with engineering expertise. Provides technical customer service and coordinates testing for significant development programs. Conducts training on an as needed basis. Conducts feasibility studies on proposed projects from the aspect of product reliability and testing. Evaluates progress made on projects and makes or suggests changes deemed appropriate. Develops and maintains a corporate test documentation system. Maintains liaison with Engineering, Sales, Marketing and Production personnel. Company Information: Horton, Inc., is a family owned, leading provider of engine cooling solutions worldwide. Horton is a global organization with employees and representatives in the U.S.A, Canada, Mexico, Germany, China, and more! We offer our employees great potential for personal and professional growth. For more information on Horton, Inc. please visit our web site at ***************** Responsibilities Electro-Mechanical Test Engineer Responsibilities: * Manages the process of design or verification of new or existing products. * Visits customer locations at project initiation to develop an understanding of the customer's needs. * Supervises verification plans and works with manufacturing and test staff to model and test designs. * Tests materials and concepts, working closely with the Test and Research staff to design tests and document results. * Determines when a product is ready for release and provides authorization for release of drawings and literature. * Works with manufacturing, providing engineering support during the production phase. * Supervises tests to measure the function and quality of products and to test new ideas or modifications of existing products. * Provides engineering support to the sales and management functions, assisting sales staff to respond to customer needs. * Attends sales and marketing planning meetings to discuss design needs and brainstorm for ideas regarding ways to meet specific customer or general market requirements. * Travels to customer locations with sales staff to observe applications and collect information necessary for addressing specific customer needs. * Coordinates product field tests to determine production use suitability of new or improved designs. * Works with sales team or development engineers to set up field tests to work out specific existing or potential future problems. * Supervises the collection of performance information in the field and the writing of detailed reports that provide design development information to the engineering staff. * Other duties as assigned. Qualifications Electro-Mechanical Test Engineer Qualifications: * Requires a 4-year Engineering degree. * Requires at least 3 years of experience. * Good communication skills. * Proficiency with Microsoft office Suite. * Strong mechanical and electrical aptitude are paramount. * Familiarity with PLC's and C-programming is desired. * Familiarity with data acquisition and controls experience is desired. * Experience with CAD, GDT, FEA, Reliability Testing and Design of Experiments is preferred. * Previous job experience in a test environment is preferred. Additional Information: The estimated hiring range for this position is $80,000 - $97,000 per year plus bonus. The starting pay for this role with some prior experience is $80,000. Compensation will increase based on experience and qualifications. We also offer a competitive benefits package including PTO, Company Paid Holidays, 401K, Medical, Dental, Vision, HSA, FSA, Life, AD&D, STD, LTD, Education Assistance, and a dynamic work environment. To apply, qualified candidates should log onto ********************************* Horton Holding, Inc. is an Equal Opportunity employer. Veterans/Disabled PM17

Spectrum Safety Solutions With approximately 1,500 employees operating in more than 20 countries, Spectrum Safety Solutions is a global leader in fire detection and suppression solutions for high-hazard applications across verticals such as critical infrastructure, oil and gas, marine and clean energy. Our global team leverages strong customer relationships across four recognized brands, Det-Tronics, Marioff, Autronica, and Fireye, to deliver differentiated lifecycle solutions and advance growth across key segments. Carved out from Carrier's Fire & Security business in July 2024, Spectrum Safety Solutions is now a privately held company under the ownership of Sentinel Capital Partners. Det-Tronics We make the world a better place to live! At Spectrum's Det-Tronics, we build and maintain comfortable, accessible, efficient, healthy, safe, secure, and sustainable environments. Det-Tronics is a $180M technologically innovative, projects-based global brand protecting customers in many challenging environments with high end flame and gas detection products and systems. Det-Tronics is a part of Spectrum Safety Solutions and has a global footprint with manufacturing sites in the U.S. and sales presence in all key geographies. About this role The Principal Mechanical Engineer leads and manages hardware aspects of products throughout their entire lifecycle from architecture, planning, design through verification and validation. Provides mechanical-design technical leadership for teams in cross-functional new product development and sustaining engineering projects. Hardware design development is for products based on different complex sensing technologies (e.g. Optical, Electrochemical) and communication technologies (wired and wireless). Key Responsibilities: Provide technical leadership to mechanical team members. Lead mechanical strategic planning, concept generation, architecture definition and translation to system/subsystem/component definitions, with a focus on manufacturability, reliability, safety, and sustainability. Lead the capture of mechanical requirements and associated rationale(s) for regulated products. Collaborate with other engineers and designers on requirements development, product risk analyses, design and technical reviews, and other product development deliverables. Support project managers by providing work breakdown plans and task estimates in support of project plans and schedules. Manage tools and processes necessary to ensure traceability from requirements to test cases. Lead and contribute to the development of resolutions to product mechanical-related issues in development projects and manufacturing operations. Follow development processes, lead technical reviews, ensure product requirements comply with company standards, and properly document work deliverables. Work closely with technical and subject matter experts to ensure accurate and complete use case coverage and regulation compliance. Ensure that mechanical designs are rigorously documented, supported and substantiated with analytical and/or numerical analyses e.g., FEA and tolerance analyses, tested at different stages of development, and controlled. Establish (as needed), implement, and maintain written verification and testing standards and policies. Work closely with Approvals and Test Engineers to develop and execute mechanical tests. Participate in roadmap planning and identify competency/resource gaps and implement plans to close the gaps. Support multiple product development programs at a given time. Develop and implement risk mitigating solutions. Required Qualifications: Bachelor of Science degree in Mechanical Engineering. 7+ years of experience including with CAD tools. 5+ years developing electro-mechanical products. Must have led the mechanical development of at least one (1) product development effort from inception through market launch. Due to contractual agreements, must be a US citizen, green card holder, or permanent resident. Preferred Qualifications: 3+ years' experience with PTC Creo and Windchill CAD tools. Advanced degree strongly preferred. Platformed product development desired. Strong mechanical discipline knowledge and expert in mechanical engineering design analyses (particularly tolerance analyses and FEA) and testing methods. Experience working with vendors in design for manufacturability in die/investment casting, injection molding, machining, assembly, and troubleshooting manufacturing defects in defective materials reviews. Possess a thorough knowledge of design practices, methodologies, tools, and instruments preferably for regulated products. High hazard application (Industrial Life Safety, SIL2, explosion-proof enclosure) knowledge is strongly preferred. Experience with functional safety standards (e.g., IEC 61508) and Functional Safety certified is desired. Must have excellent written and verbal communication skills for collaboration with project stakeholders (Product Managers, Customers, and other Engineers). Skilled in collaborating with other engineers to distill market needs into defined technical requirements, system/subsystem/component architectures, and verification/ validation test plans. Demonstrated root cause analysis skills (Lean Six Sigma, 5 Whys, Ishikawa diagrams). Expert knowledge of GD&T and ASME Y14.5 drawing best practices. Ability to work both collaboratively and independently on assignments to foster continuous improvement of team functions and deliverables. Experienced with FMEAs and developing control techniques to mitigate risks. Self-motivated and demonstrated ability to lead process improvement activities. Must be able to perform essential job functions safely, and work within established company guidelines.

Job Description Bolton & Menk has an exciting opportunity for a Design Engineer, EIT, to join our Transportation team in our Duluth office. As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. In this entry level civil engineering role, we are looking to add an EIT who will help foster our mission that All People Should Live in Safe, Sustainable and Beautiful Communities! The majority of your time will be spent assisting project managers and project engineers in design and construction phase activities on Municipal projects. This position is open to December 2024, May 2025 graduates or an experienced EIT with 1-3 years of experience. What You Will Be Doing: Assist Project Engineers with design and construction phase activities on municipal projects Perform basic design computations, preliminary layout and design, research and prepare rough drafts of preliminary reports and feasibility studies Assist with project plans and specifications, preparing cost and quantity take-off estimates Construction observation activities may include performing construction staking, performing construction administration duties such as documenting activities, measuring and testing, providing general oversight, and interacting with contractors, sub-contractors, residents and City staff. What We Are Looking For: Bachelor's degree in Civil Engineering from an accredited college Certified Engineer-in-Training or able to obtain within 12 months of hire Prior experience in either infrastructure design and/or construction observation Working knowledge and skills in CAD and design software.(i.e. AutoCAD Civil3D, MicroStation) Requires frequent travel during construction season Possess a valid drivers license as travel to various facilities and job sites may be required Bolton & Menk will currently not be providing visa sponsorship or Optional Practical Training Extensions for STEM Students. Individuals must be legally authorized to work in the US at the start of employment without a need for current or future visa sponsorship. Salary Range: $58,000 - $90,000 depending on years of experience and credentials Bolton & Menk is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to specific geographic location. Bolton & Menk reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant's sex or other status protected by local, state, and/or federal law. Supporting Our Employees There's life at work and life outside of work. Bolton & Menk has a number of benefit programs and amenities to support you and your family throughout whatever stage of life you are in. Benefits: Competitive compensation plan - overtime compensation available to most employees Discretionary bonuses available to most employees ESOP - Employee ownership (ESOP); 100% company-paid contributions 401(k) Match Program Paid time off (PTO) Volunteer Time Off (VTO) Six paid company holidays Two floating personal holidays for events that are important in your life Tuition reimbursement Parental leave Short term and Long-term disability Dependent care reimbursement Employee assistance program Health insurance Flexible spending account Life insurance Vision insurance WHY BOLTON & MENK? Bolton & Menk, Inc. specializes in providing community infrastructure solutions. Since 1949, we have been committed to improving quality of life through engineering excellence and client satisfaction. From advocating for our communities to designing their dreams to finding funding; we take pride in our work because we live in these same communities. Today, Bolton & Menk has more than 1,000 employees throughout more than 40 locations in Minnesota, Iowa, North Dakota, Wisconsin North Carolina, South Carolina, and Colorado providing services to more than 400 communities and agencies. Learn more about our history here: ************************************* OUR BENEFITS At Bolton & Menk, we value our people and provide an exceptional Total Compensation and Benefits Package to protect our most valuable asset. We are committed to the well-being of our employees and their families. Perks of being a Bolton & Menk employee include peace of mind with our benefits package and competitive compensation plan, flexible schedules, and career development opportunities. Learn more here: *********************************** We thank all applicants in advance for their interest in this position, however, only those selected for an interview will be contacted. Bolton & Menk does not accept unsolicited resumes from individual recruiters or third-party agencies in response to Bolton & Menk job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. Pre-approval from the Bolton & Menk Talent Acquisition team is required after any external candidate can be submitted and such candidate must be submitted to the Bolton & Menk Talent Acquisition team. It is our responsibility and privilege to embrace the diversity of people, thoughts, and experiences necessary to develop infrastructure systems that serve all people. Bolton & Menk, Inc., is an Equal Employment Opportunity / Affirmative Action Employer including disability and vets.

Full-time Description Manufacturing Engineer Yanmar Compact Equipment North America designs, manufactures and supports a complete range of compact equipment including compact track loaders, mini excavators, wheel loaders and construction equipment for use in such markets as construction, landscaping, utility, land management and agriculture. The products are sold primarily through a third party, independent dealer network. OVERVIEW: The Manufacturing Engineer will support the planning, designing, implementing and managing of integrated production systems that ensure the highest level of safety, quality, cost, and delivery performance of our processes and products in the compact equipment industry. ROLES & RESPONSIBILITIES · Maintain a safe and healthy work environment by implementing, maintaining and aligning processes with health and safety policies and regulations. · Develop and maintain manufacturing process documentation and instructions. · Develop, design and maintain manufacturing tooling and equipment. · Analyze labor and equipment utilization, facility layout, processes, and operational data such as production costs, process flow, and production schedules to identify cost reductions and improve utilization of space and equipment. · Identify new manufacturing technologies and ideas to improve manufacturing processes. · Perform detailed and accurate research, justification, and recommendation for capital expenditures and new equipment. · Prepare time, cost and resource estimates for proposed projects and coordinate layout and workstation improvement activities. · Provide leadership and/or participate in continuous improvement initiatives and projects across multiple departments. · Work with operations leadership to continuously improve safety and quality, and to identify opportunities to reduce costs and increase throughput. · Work with operations leadership to foresee and establish future investment and labor needs according to company plans. · Review and analyze new and existing product designs regarding process, tooling, labor and cost impacts. Make recommendations to improve manufacturability, improve quality, and to reduce costs. · May perform other responsibilities as assigned. Requirements REQUIRED QUALIFICATIONS: · B.S. degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or related field from an accredited college or university. · One (1) year of related engineering experience. · Proficient with computers including MS Office and CAD. · Experience working in an industrial manufacturing environment. PREFERRED QUALIFICATIONS: · Three (3) years of Manufacturing Engineering, Design Engineering or Quality Engineering experience. · Experience with industrial manufacturing methods such as laser cutting, forming, machining, welding, paint processes, assembly tooling and practices. · Experience with lean manufacturing, 5S, Kaizen concepts and goals. · Experience with Creo and Windchill. · Experience with application of GD&T. KNOWLEDGE, SKILLS, ABILITIES: · Ability to understand engineering drawings and interpret design intent. · Strong verbal, written, listening, and presentation skills including the ability to teach others. · Strong analytical, problem-solving, project management, and decision-making skills. · Ability to work independently and have a high level of initiative to resolve problems and drive improvements. · Ability to develop, maintain, and strengthen partnerships and teams both inside and outside of the organization. · Strong ability to collaborate with and/or lead cross-functional teams. · Ability to work in a fast-paced environment while managing multiple projects and meeting timelines. · Strong hands-on mechanical ability. · Ability to travel domestically and internationally. Worksite: Grand Rapids, MN Position: Manufacturing Engineer Job Type: Full Time FLSA: Exempt Department: Operations Work Schedule: M-TH Starting Wage: $70-85K This position offers the potential for discretionary bonus compensation up to 10% of base salary. Benefits: YCENA currently offers a comprehensive benefits package including Medical, Dental, Vision, Basic Life & AD&D, Voluntary Term Life, Short & Long Term Disability, EAP, HSA, Medical & Dependent Care FSA, Accident Insurance, Critical Illness, and Hospital Indemnity, Paid Time Off, Paid Holidays, and a 401(K) plan with a company match of up to 4%. The above Job Description is not intended to be an all-encompassing list of responsibilities, skills, efforts or working conditions associated with this position. It is intended to be a guideline reflecting the principal activities.

The driving force behind our success has always been the people of AspenTech. What drives us, is our aspiration, our desire and ambition to keep pushing the envelope, overcoming any hurdle, challenging the status quo to continually find a better way. You will experience these qualities of passion, pride and aspiration in many ways - from a rich set of career development programs to support of community service projects to social events that foster fun and relationship building across our global community. The RoleAs a Power Systems Model Engineer at AspenTech, you will participate in technical engagements with utility customers to implement, customize, and support power system solutions using AspenTech' s DMS software. You will be implementing ETL (Extract Transform Load) processes to generate high-fidelity customer network models necessary to feed AspenTech software with the operational data. Your knowledge of GIS systems, engineering packages, and other common sources of distribution network model will be essential in delivering successful customer solutions.Your Impact Act as a dedicated model engineer building and maintaining accurate network models using monarch NMM Software Participate in end-to-end modeling solutions, including design, GIS data mapping, review, configuration, and integration with systems that contribute data needed to build NMM network models through ETL processes. Troubleshoot technical and modeling issues. Collaborate with Subject Matter Experts to ensure timely resolution. Conduct training sessions, workshops, and develop user documentation to enhance client capabilities. Translate client feedback into actionable insights for product improvement. Collaborate with R&D to enhance functionality, data handling, and usability features. Contribute to the development of advanced tools and scripts to streamline model-building and validation. Support sales, customer success, and proposal efforts with technical insight. Maintain up-to-date knowledge of modeling practices What You'll Need Bachelor's or master's degree in electrical engineering with a focus on Power Systems. Alternatively, bachelor's or professional degree in GIS with the focus on spatial data management Strong Computer Systems background with the focus on data management and ETL processes 3+ years of experience in transmission and/or distribution system modeling, preferably in a data handling role. Proficiency with Monarch NMM or similar modeling platforms. Working knowledge of utility modeling workflows, CIM standards, DBMS and GIS technologies Excellent communication, presentation skills. The salary range for this role is $77,900.00 - $97,400.00. This range represents what we in good faith believe is the range possible for base compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range based on several factors. This range may be modified in the future. This role is also eligible for bonus or variable incentive pay. Additionally, we offer a comprehensive benefits package including paid time off, charitable giveback day, medical/dental/vision insurance, and retirement benefits to eligible employees.

The Project Engineer will provide Project Management and Technical Expertise to execute U. S. Steel's Capital Plan and All Cost Projects in the plants business plan. This position will be actively engaged with the other departments to identify opportunities to improve the working environment, infrastructure & cost structure of the facility. Investigate, choose, direct, coordinate and supervise outside consultants while discharging one's duties managing the capital and cost projects as well as investigating general improvement of the facilities and processes. Exercise independent technical judgment to develop feasibility studies and evaluate complex alternatives utilizing data such as production, operating cost, energy consumption, yields and others for identifying and implementing improvements to the facility. Combine an awareness of plant quality, yield, and spending requirements with a broad knowledge of process, equipment, and material usage in the industry to identify opportunities to improve facilities or practices. Responsibilities: * Provide technical assistance to the operating and other staff functions. * Implementation and execution of the USS employee and contractor safety and environmental compliance programs. * Manage capital and cost projects, including identification of the business case, initial planning, developing scope, determining benefits, and estimating cost. * Evaluate and select the best available technology to solve assigned tasks through networking with both internal and external based resources. * Participate in the project capital or cost funding decision process with Accounting and Tax personnel. * Prepare the necessary capital appropriation or cost expenditure request for presentation to the Plant Appropriation Committee and Corporate Management. * Responsible for directing outside engineering firms in the preparation of detailed equipment and installation specifications and design drawings, as well as inspection services as requested. * Control projects to adhere to budget amount and spending schedules. * Perform a complete technical review of equipment supplier proposals and recommend the purchase of equipment that is acceptable. * Conduct a thorough review of contractor installation proposals and recommend the acceptable suppliers. * Responsible for monitoring equipment manufacture and assembly to assure compliance with specifications and delivery schedules. * Manage equipment installation or modifications on a 24-hour basis to meet facility outage and construction schedules. * Provide the necessary training and startup assistance to commission new equipment on schedule and achieve stated objectives. * Maintain up to date knowledge of current technology through plant visits, continuing education, seminars, and technical exchanges. Requirements: * We are looking for motivated self-starters with 7+ years of experience that can work in a fast-paced, data-driven environment. * Bachelor of Science Degree in Engineering is required. * Ability to use Microsoft Excel, Word, Project, PowerPoint, and Oracle software. * Capital project management experience or equivalent experience managing maintenance outage work or improvement teams is preferred. * Ability to multitask in a multi-faceted work environment with diverse types of responsibilities. Salary Range: $115,259 - $139,463. This base salary range is a good faith estimate. Based on candidate skills/experience the final offer may be lower/higher. Company Overview Since 1901, U. S. Steel has been a recognized leader in steel production. Today, as the first North American steel company to have declared a 2050 net-zero greenhouse gas emissions goal, we remain as innovative as ever, leading transformation across our industry while continuing to make products for everyday life - from industries as far ranging as automotive, construction, containers and packaging, appliances, and energy. Underneath it all is our Culture of Caring, which shows up in our community partnerships, charitable contributions, company-sponsored employee volunteer initiatives, scholarship programs, leadership training, and much more. And of course, it takes shape in a steadfast commitment to safety first in our workplaces and respect for our employees, who are United by Steel. We are honored to have earned accolades and awards from well-regarded organizations, including the following: * Ethisphere's World's Most Ethical Companies 2022, '23, '24 * Disability: IN's Best Places to Work for Disability Inclusion 2021, '22, '23, '24 * Human Rights Campaign Foundation's Equality 100 Award 2020, '21, '22, '23-24, '25 * Military Times' Best for Vets: Employers 2023, '24 Conducting business with integrity and with the highest ethical values has underpinned U. S. Steel's success for over 100 years, and it remains critical to our company's success in the future. U. S. Steel is an Equal Opportunity Employer. It is our policy to provide equal employment opportunity (EEO) according to job qualifications without discrimination on the basis of race, color, religion, ancestry, national origin, age, genetics, sexual orientation, sex, gender identity, disability status or status as a protected Veteran or any other legally protected group status. (California residents may visit ************************ regarding collection of personal information and U. S. Steel's privacy practices.)

Braun Intertec is seeking a Project Engineer to join our Hibbing office. This position manages moderate to highly complex geotechnical, special inspection, and construction materials testing projects by providing technical expertise required to exceed client expectations. Responsibilities: Develop and maintain internal and external client relationships, including project and non-project related face-to-face meetings Leadership of a technical or project related team Prepare proposals for moderate to complex projects Develop and execute whole scopes, and prepare engineering reports giving professional opinions and practical geotechnical solutions Manage projects (scope, schedule, budget) Perform engineering analysis using company and industry methodologies and standards Mentor junior level engineering staff Understand and work in compliance with corporate health and safety policies Required Skills: Driven for success Attention to detail and multi tasking Highly organized and ability to prioritize work Strong leadership, analytical, and interpersonal skills Ability to work both independently and as a team member Ability to create, maintain, and communicate project budgets Excellent written and verbal communication skills Excellent problem solving skills Travel up to 25% of time Required Experience: Bachelor's degree (BS) in geotechnical, civil, or related engineering required Master's degree (MS) in geotechnical, civil, or related engineering optional Three or more years of geotechnical engineering and construction materials testing project management experience Experience managing client relationships, vendor management, and leading a team preferred Professional Engineer registration/licensure in MN, or ability to attain within 6 to 12 months Ability to lift up to 50 to 75 pounds on a periodic basis Braun Intertec is a Drug-Free Workplace and requires all new hires to complete a pre-employment drug screen test, criminal background check, and motor vehicle report. Braun Intertec employees are encouraged to expand their skills and certifications through company provided training and mentoring. Braun Intertec offers a competitive compensation and benefits package, including: medical, dental, vision, life insurance, 401(k) plan, PTO, Employee Stock Ownership Program (ESOP), and paid holidays. #LI-MB1 Compensation Range: $77,400.00 - $116,000.00 As an EEO/Affirmative Action Employer, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, veteran or disability status. Braun Intertec strives to ensure that its careers web site is accessible to all. If you need assistance completing your online application, please email ************************. As an Equal Opportunity Employer, Braun Intertec is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans. If you need a reasonable accommodation to assist with your job search or application for employment, please e-mail us at ************************. In your e-mail, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

At Frontier Energy, we're more than just engineers and professionals-we're a team of innovators, problem-solvers, and visionaries dedicated to advancing clean energy solutions. Our mission is to pioneer the intelligent use of energy for a sustainable and resilient future. We offer a collaborative and dynamic workplace where your ideas are heard, nurtured, and transformed into impactful solutions. With a flat hierarchy and open-door policy, every team member is empowered to experiment, take ownership, and make a real difference. Beyond fostering an inspiring culture, we provide competitive compensation, comprehensive benefits, and opportunities for growth. Join us and be part of a team that's shaping the future of energy while leaving a positive impact on the world. The Energy Engineer will be responsible for performing energy savings analyses and gathering on-site data from end-use customer facilities, including coordinating and installing data-logging equipment. This position requires effective communication and coordination with internal teams as well as external stakeholders such as clients, contractors, and technical partners. Candidate will be responsible for site acquisition and customer outreach. Proficiency in Microsoft Office applications is essential, with a strong emphasis on Excel for data analysis and Word for producing technical reports. Candidate must be familiar with measurement and verification protocols and approaches. Familiarity with project management software such as Asana or Deltek Vantagepoint is a plus. This position will require travel (primarily by car) approximately 25% of the time. Duties and Responsibilities * Evaluate and analyze the performance of building systems (HVAC, hydronic, and electrical) in commercial and industrial environments * Conduct accurate on-site energy analyses to gather the necessary details for developing energy-saving recommendations and supporting rebate or incentive applications for end-use customers * Install sub-metering devices on HVAC and process equipment and interpret the data to develop energy models * Conduct outreach to new and existing clients to find project opportunities * Manage time effectively across fieldwork and office-based tasks to ensure project milestones are met * Collaborate with clients, contractors, and design professionals to understand building characteristics and identify opportunities for energy optimization * Translate findings into actionable recommendations through clear, well-organized reports and presentations * Provide regular project updates and status reports to the program lead * Travel by car to customer sites, generally within 100 miles of the Duluth office (occasionally farther) * Perform other activities as requested related to energy conservation, reporting, and project support as needed * Comply with all company policies and procedures, and attend all required training courses Required Qualifications * Bachelor's degree in Engineering (Mechanical, Civil, Industrial, Environmental, Architectural, or a related discipline. Must be ABET accredited or equivalent) * A minimum of three years of relevant professional experience in engineering, building systems, energy efficiency, or a closely related field aligned with the specified degree disciplines * Foundational understanding of commercial and industrial building systems, including HVAC, hydronic, and electrical systems * Demonstrated experience or strong interest in energy efficiency, building performance analysis, or sustainable design * Proficiency in Microsoft Office, with a strong emphasis on Excel for data analysis and reporting * Strong analytical and problem-solving skills, with the ability to draw insights from data and translate them into actionable recommendations * Excellent written and verbal communication skills, with the ability to clearly convey technical concepts to diverse audiences * Detail-oriented with a focus on accuracy in data collection and reporting * Self-motivated and organized, with the ability to manage time effectively across multiple tasks and projects * A collaborative and personable approach with the ability to work well in both independent and team environments * Willingness to learn, take initiative, and adapt in a fast-paced and evolving work environment * Experience with customer service and outreach, with the ability to engage professionally and effectively with clients, contractors, and stakeholders * As this position requires driving, the candidate must have an active, valid, appropriate driver's license and regular access to a personal vehicle Preferred Qualifications * Advanced understanding of building systems, energy technologies, and their applications within commercial and industrial settings * Professional certifications such as Certified Energy Manager (CEM), Engineer-in-Training (EIT), LEED accreditation, or other relevant industry credentials * Experience with utility incentive programs or energy rebate application processes * Familiarity with energy modeling tools, auditing software, or building automation systems * Ability to interpret technical drawings, specifications, and system schematics * Prior experience supporting or leading energy audits or decarbonization initiatives * Working knowledge of applicable energy codes, standards, or sustainability guidelines (e.g., ASHRAE, Title 24, ENERGY STAR)

Define the future of aviation. Join Cirrus Aircraft's team to build the greatest transformation in aviation since the jet engine. certifiable flight technologies to bring simple and safe personal flight to the masses. The Advanced Development Group is a small and nimble team that researches, designs, and tests concepts using rapid, unconstrained set-based design methodologies. The scope of our projects ranges from feature development to end-to-end systems and proof of concept aircraft, spearheading the next products. Look no further, the future of aviation is here. Join our innovative company today. Duties and Responsibilities/Essential Functions Conduct on-aircraft system integration and validation testing. Performs fluid dynamics, aircraft performance, and stability and control. Research, implement, and evaluate software algorithms. Must be able to independently design and execute bench, ground, and flight tests, and analyze and present results. Design, execute, and present trade studies pertaining to data, software, and network architecture. Contribute towards overall architecture and strategy for the advanced flight systems. Collaboration with electrical and mechanical engineering to achieve fully integrated systems will be required. Experience with small multi-disciplinary teams is a plus. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Required Education and/or Experience: Bachelors degree in Aerospace or Mechanical Engineering required. 6-10 years' experience in a related field Proficient in a professional environment developing MATLAB / Simulink control systems Proficient in fluid dynamics, aircraft performance, and stability and control. Proficient with engineering drawings, CAD software, and engineering configuration management. Strong communication skills: Be able to concisely document and explain workflows and design choices. Maintain clear documentation and collaborate with cross-functional teams to align data engineering tasks with broader project goals. Comfortable in driving results under uncertainty during the earlier stages of development Ability to work independently as well as part of a high functioning team Distinguishing Education and/or Experience: Advanced degree in Aerospace or Electrical Engineering. Experience generating system and simulation models. Experience troubleshooting and implementing solutions for aerodynamic challenges such as drag, cooling, stability and control, and slow speed handling. Experience with developmental flight testing. Experience with physics-based 6DOF simulations. Experience with configuration and layout of new aircraft. Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces Exposure to Part 23 and/or Part 25 federal regulations. Competencies To perform the job successfully, an individual should demonstrate the following competencies: Directs Work: Provides direction, delegates, and removes obstacles to get work done. Situational Adaptability: Adapts approach and demeanor in real time to match shifting demands of different situations. Manages Complexity: Makes sense of complex, high quantity, and sometimes, contradictory information to effectively solve problems. Communicates Effectively: Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences. Our Benefits: Cirrus provides a range of exciting benefits, including: 401(k) Plan: Dollar-for-dollar match up to 5% after 90 days, with 100% vesting. Employer-Paid Coverages: Group term life, short- and long-term disability insurance. Comprehensive Health Coverage: Medical, vision, dental, with additional dependent coverage options. Free Health Tracking: With rewards for meeting health goals. Generous PTO: 160 hours accrued within the first year. Employee Referral Bonus: For referring talented candidates. Career Development: Tuition reimbursement and professional growth opportunities. Exclusive Discounts: Access to partner and marketplace discounts. Community & Engagement: Company and employee clubs at various locations. These benefits are designed to support your well-being, growth, and enjoyment at Cirrus! Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this position. Duties, responsibilities and activities may change at any time with or without notice. Work beyond 40 hours per week may be required. Cirrus is dedicated to a drug free work environment promoting equal employment opportunity. Qualified applicants will receive consideration for employment without regard to race, sex, national origin, color, age, disability, religion, pregnancy, veteran status, marital and family status, sexual orientation, receipt of public assistance, genetic information or any other characteristic protected by applicable law.

About the Role Are you a technically minded professional who loves solving problems, supporting customers, and seeing your work directly impact business success? As an Applications Engineer, you'll serve as the bridge between customers, manufacturers, and our internal teams-helping customers find the right technical solutions, preparing accurate quotes, and ensuring orders flow smoothly from start to finish. This is the perfect opportunity for someone who enjoys combining engineering know-how with relationship-building skills-and is looking to grow into a future Outside Sales role. Key Responsibilities Customer Communication & Support Respond to customer inquiries via phone and email, delivering timely and accurate information regarding products, pricing, and availability. Proactively engage with customers to provide order updates, resolve issues, and ensure satisfaction. Triage and escalate complex technical or commercial questions to the appropriate internal experts. Quoting & Order Management Prepare detailed quotations for industrial products, including process instrumentation, valves, and communication systems. Review and validate customer purchase orders to ensure accuracy in part numbers, descriptions, and application compatibility. Collaborate with manufacturers to submit and process orders in compliance with their technical and procedural standards. Documentation & Systems Maintain accurate records of customer communications, quotes, and order details using CRM and email systems. Ensure documentation is complete, up to date, and easily accessible for team reference and reporting. Product & Industry Expertise Stay current with product specifications, applications, and emerging technologies through ongoing training and self-directed learning. Use product knowledge to assist customers in selecting optimal solutions for their applications. Requirements Bachelor's degree in Engineering, Industrial Technology, or a related technical field (preferred but not required). 2+ years of experience in a technical sales, customer service, or applications engineering role within the industrial or manufacturing sector. Strong technical aptitude with the ability to understand and explain complex products and systems. Excellent written and verbal communication skills. Proficiency with CRM systems and Microsoft Office Suite. Strong attention to detail and organizational skills. Familiarity with process control, automation, or instrumentation products preferred. Experience working with manufacturers or channel partners in a technical sales environment preferred. Salary Description $70,000-$85,000, Experience Dependent