Mechanical engineer jobs in New Paltz, NY

We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Poughkeepsie, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Responsibilities System selection and calculations for design purposes Conduct field work to document existing conditions Work with Jr Engineers to develop drawings with building modeling software Work independently and as part of a team to complete project designs Construction phase services such as submittal review and site visits to monitor project progress Requirements 4 - 6 years of experience working at an A/E consulting firm is preferred Bachelor's degree in mechanical engineering is preferred. Well rounded experience in HVAC, plumbing, and fire protection Experience with Revit or AutoCAD is preferred. Field experience is preferred New York State Professional Engineer's license is a plus. Ability to work well with a team and good analytical skills. Salary Range: ($70,000 - $90,000) The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet-LaBella's benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Kickstart Your Career with an Internship at CPL Are you a student eager to turn classroom learning into real-world impact? At CPL, a nationally recognized Architecture & Engineering firm, we believe in empowering the next generation of designers, engineers, and innovators. Our internship program is your opportunity to gain hands-on experience, collaborate with seasoned professionals, and contribute to projects that shape communities. Why Intern with Us? Real Projects, Real Impact - Work on meaningful assignments that go beyond “busy work.” Mentorship & Learning - Learn from industry experts who are invested in your growth. Collaborative Culture - Join a team that values creativity, curiosity, and fresh perspectives. Career Pathways - Explore your future in architecture, engineering, planning, design, or project management. Who We're Looking For We welcome students from all backgrounds of study-Architecture, Engineering (MEP and Civil), Interior Design, and related fields-who are: Curious, motivated, and eager to learn. Excited to bring their ideas to the table. Ready to embrace teamwork and new challenges. Day-to-Day Responsibilities As a Mechanical Intern, your daily activities will involve a mix of technical design work, collaboration, and learning opportunities. Typical tasks include: Design Support: Use Revit to create and update 3D models of HVAC systems, ensuring accurate layouts and coordination with other building systems. Load Calculations: Perform heating and cooling load calculations using Carrier HAP software to support system sizing and energy efficiency analysis. Documentation: Assist in preparing technical drawings, schedules, and specifications for project deliverables. Team Collaboration: Review design progress, and communicate with engineers and project managers to align on requirements. Site Exposure: Participate in occasional site visits to observe installations, verify design implementation, and learn troubleshooting techniques. Research & Learning: Explore new HVAC technologies, sustainability practices, and energy-saving strategies to contribute innovative ideas to the team. How to Get Involved We're now collecting registrations of interest for upcoming internship opportunities. If you want to grow your skills, build your network, and make a tangible difference, we'd love to hear from you! ???? Apply now to register your interest and be among the first to hear about our internship openings. Be part of something bigger. Start your journey with CPL today. LEARN MORE CPL is proud to be not only an equal opportunity employer, but a diverse and motivating place to work. Visit our website (that's cplteam.com) to see what we're all about.

Photronics Inc. Established in 1969 Largest Global Photomask Supplier Reputation of Service Excellence Department of Defense Trusted Our People Make the Difference Join our family and grow with us! Photronics Inc's photomask fabrication facility in Brookfield, CT, is looking for a hands-on Equipment Engineer to join our team. Our technology enables hi-tech companies to create next generation semiconductors. If you are looking to join an engaging, rewarding, collaborative, and friendly working environment in a highly technical operating setting, we want to hear from you! Qualifications 1-2 years of experience in a similar job function. Excellent diagnostic and troubleshooting skills for process/equipment tool sets. Experience in the preventative maintenance of tool sets. Ability to handle multiple projects simultaneously. Computer hardware/software experience a plus. Able to read and interpret electrical schematic diagrams. Optical alignment experience a plus. Competent with a DVM and Oscilloscope. Cleanroom experience a plus. Education A Bachelor's degree in a technical discipline such as Electrical, Electronics, or Electro-Mechanical Engineering is required. Candidates with an Associate degree in a related technical field may be considered for an Equipment Engineering Technician role. Competitive Benefits Health Insurance Dental Insurance with Orthodontia option Vision Insurance Basic Short- and Long-Term Disability Enhanced Long Term Disability 401 (k) plan with company match Employee Stock Purchase Plan Annual Bonus Program Health benefits are eligible the first of the month after date of hire Please note: This facility is a secure site subject to International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). As such, all candidates must be U.S. persons as defined by these regulations (U.S. citizens, lawful permanent residents, or protected individuals under 8 U.S.C. 1324b(a)(3)) and legally authorized to work in the United States. Photronics is an equal Opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability status, sexual orientation, gender identity and expression, pregnancy, protected veteran status, or any other classifications protected by law. This includes providing reasonable accommodation for team members' disabilities or religious beliefs and practices. Photronics is an E-Verify company.

JOB TITLE: Junior Mechanical Engineer TYPE: Full time, regular COMPENSATION: $70,000 $90,000/yr Clarapath is a medical robotics company based in Westchester County, NY. Our mission is to transform and modernize laboratory workflows with the goal of improving patient care, decreasing costs, and enhancing the quality and consistency of laboratory processes. SectionStar by Clarapath is a ground-breaking electro-mechanical system designed to elevate and automate the workflow in histology laboratories and provide pathologists with the tissue samples they need to make the most accurate diagnoses. Through the use of innovative technology, data, and precision analytics, Clarapath is paving the way for a new era of laboratory medicine. Role Summary: The Junior Mechanical Engineer will be working on medical device development as part of a tight knit development team. This role is multi-disciplinary with responsibility for designing and selecting parts for the instrument as well as designing test fixtures for development. The ideal candidate will be expected to fully support production and client services as part of the concept to production process. We are looking for a team player who views medical device development as a competitive advantage. Responsibilities : Generating drawings for parts and assemblies Supporting production tasks, such as inspections, trouble-shooting assemblies and testing Writing and updating work instructions per production and quality feedback Documentation as per FDA and Company SOP requirements Modeling and simulation of design components, such as, dynamic system modeling, kinematic modeling, structural, and thermal analysis Designing for Manufacturing and performing Engineering Change Notices to improve manufacturability and quality Finding and managing vendors for prototyping and production Creating test fixtures including instrumenting with data acquisition systems and programming Supporting production for method sheet creation, tooling, and process qualification Qualifications: Bachelor s Degree in Mechanical, Aerospace, Biomedical Engineering or in an equivalent area 2+ years of experience in the mechanical engineering field Exposure to software such as Python, MATLAB, C++, HTML Design experience in precision automation Competency in designing large electromechanical system components Proven design record Analytical problem solution skills, such as modeling and simulations Involvement in automation related extracurricular activities, such as, First Robotics Additive manufacturing, such as 3D printing Strong interpersonal, verbal, and written communication skills Time management skills to prioritize and meet deadlines Ability to work independently and as a member of a team Flexibility to work in a changing and fast paced environment Drive, determination and ability to hit aggressive milestones/deadlines Proficiency in Microsoft Office Applications including Excel, PowerPoint, and Word Proficiency with 3D CAD software, SolidWorks is preferred Company Offers: Competitive salary, commensurate with experience and education Comprehensive benefits package available: (healthcare, vision, dental and life insurances; 401k; PTO and holidays) A collaborative and diverse work environment where our teams thrive on solving complex challenges Ability to file IP with the company Connections with world class researchers and their laboratories Collaboration with strategic leaders in healthcare and pharmaceutical world A mission driven organization where every team member will be responsible for changing the standards of delivering healthcare Clarapath is proud to be an equal opportunity employer. We are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. In addition to federal law requirements, Clarapath complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

ARKA Group L.P. (“ARKA”) is an advanced technologies company serving the U.S. military, intelligence community, and commercial space industry delivering next-generation solutions to support the national security space enterprise. Built on more than six decades of excellence, ARKA brings modern approaches and a culture of innovation to the challenges of today. Join the ARKA team to learn how Beyond Begins Here. Discover your next career opportunity now! Position Overview: Our Student Program provides amazing opportunities to develop functional job skills and gain real-world experience and expertise. We offer spring, fall and year-round internships and co-ops in fields across the company, including engineering, finance, and business development. We are currently seeking a student enrolled in Henry Abbot Technical School in the Mechanical Design and Engineering Technology program to join our Engineering department as a Year-round Intern. Responsibilities: This position requires an entry level designer/drafter to apply technical skills for moderate complexity interdisciplinary tasks. You will be responsible for producing tooling and related flight hardware within an integrated product team It is expected you will work autonomously with moderate oversight and be accountable for both space flight and non-space flight development program milestone deliverables Basic Qualifications: Enrollment in Henry Abbot Technical School in the Mechanical Design and Engineering Technology program Create part models, assembly layouts, detailed drawings, and bills of materials using CREO for solid modeling and PDMLink for data management Execute engineering design changes for part and assembly drawings Interact and coordinate with all engineering disciplines to deliver comprehensive design, engineering, and specification packages Preferred Qualifications: General understanding of GD&T Location: Danbury, CT This position is based onsite at our facility in Danbury, CT. Located in beautiful Fairfield County, Danbury offers a diverse economy, wonderful parks, cultural attractions, an impressive mix of private and public educational institutions and a vibrant arts scene. Our facility is nestled among a remarkable selection of communities to call home all with varying price points to fit many different budgets. We're close to New York City, Boston, and other major cities - great for day trips and weekend getaways. Our lovely seasons along with award-winning institutions, colleges, cultural events, and a genuine sense of community brings a diverse population to the beautiful state of Connecticut! When you choose to join the ARKA Student Program, you will: Gain hands-on experience in your chosen field and share your unique ideas and creative problem-solving skills to help us continue our legacy of innovation Flourish and seamlessly develop great relationships with co-workers Network with students from other universities Participate in activities that support our local communities Work alongside our talented team, including employees who started as interns or co-ops Enjoy companywide employee activities Receive competitive compensation and paid holidays EHS/Environmental Requirements: This job operates in a professional office environment. While performing the duties of this job, the employee routinely is required to use hands to keyboard, communicate, listen to, and interpret instructions and remain stationary for extended periods of the time. This would require the ability to move around the campus and occasionally move/lift items weighing up to 25 lbs. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Applicants are invited to apply for a reasonable accommodation to perform the essential duties of the job. To apply, send a request to ***************** or contact ************ and press 2 for Human Resources. ITC & Security Clearance Requirements: This position requires the incumbent to access export-controlled information. If you are not a U.S. Person, any offer is contingent upon the Company's ability to obtain a special license granting you access. This could take several months. You will not be able to begin employment until such license is obtained. Visa Restrictions: No visa sponsorship is available for this position. Pre-employment Screenings: Employment with any ARKA companies in the U.S. is contingent upon satisfactory completion of several pre-employment requirements to include a credit check, background check, and drug screen.

Qualifications you'll bring: Bachelor's Degree preferred; equivalent experience may be substituted if the candidate can demonstrate significant relevant work experience. Minimum of 5 years in health insurance or equivalent experience in Finance or Project Management. Strong proficiency in problem solving and analysis Ability to use Microsoft Office and Power Point Proficiency in Excel. Must be able to manipulate pivot tables, utilize mathematical formulas, filter data, etc. Excellent presentation skills Proficiency in financial impact analysis Curiosity to foster innovation and pave the way for growth Humility to play as a team Commitment to being the difference for our customers in every interaction Your key responsibilities: Coordinates with Analytics Team to generate performance reporting and associated financial models. Assists Leaders in leveraging of competitive transparency data during contract negotiation and annual performance reviews. Assists with developing contract documents for renewals and/or amendments in compliance with company templates, reimbursement structure standards and other key process controls. Supports the business relationships with Hospital, Physician and Ancillary Facilities. Maintains an inventory of contracts, due dates, term clauses/end dates, spend and services by LOB. Requests necessary data analytics from Informatics to support key business objectives and product objectives where contracting is involved. Keeps and maintains necessary database trackers and a tracking system for department and MVP report outs. Processes forms, tracks and scans signed/executed agreements and amendments. Serves as the primary point of contact for day-to-day issues such as payment issues, authorization issues and contractual language interpretation disputes. Ability to maintain confidentiality and adhere to regulatory compliance issues as they exist and change from time to time. Proactive in identifying areas for efficiency improvement across all of Network Management; consistently challenges the status quo in favor of incremental improvement opportunities that could be achieved through new methods. Contribute to our humble pursuit of excellence by performing various responsibilities that may arise, reflecting our collective goal of enhancing healthcare delivery and being the difference for the customer. Where you'll be: Location: Hybrid to Schenectady, NY or Fishkill, NY

Tectonic is actively seeking full-time Project Engineers / Assistant Resident Engineers to work on a variety of upcoming MTA Transit projects (NYC Transit, Metro North Railroad, Long Island Rail Road, Staten Island Railway, Bus, etc.), as well as for upcoming NJ Transit and Amtrak projects! ESSENTIAL FUNCTIONS Assists with providing professional engineering and construction oversight services on multiple rail transit design-build and/or construction projects; Acting as Client's representative in the field with contractors, vendors, utilities, owner labor-forces, and other external parties on projects involving rail transit systems, including rail infrastructure elements such as: stations, facilities, shops, yards, signal systems, communication systems, power systems, bridges and viaducts, tunnels, track systems, drainage, structural elements, fare payment systems, vertical transportation systems, security systems, and associated work; Assists the Resident Engineer (RE) and/or Project Manager (PM) in supervising, coordinating, and tracking all field site activities and provides technical advice on construction and design; recommends and executes corrective actions to resolve issues; Assists RE / PM in responding to requests for information from contractors by interpreting plans and specifications by utilizing advanced knowledge of engineering and experience; Regularly reviews engineering design, plans, shop drawings, product data, other construction-phase submittals / deliverables, and reviews and recommends approval to RE / PM of same; Reviews contractor payment applications and recommends approval or rejection to PM / RE; Assists PM/RE with reviewing validity of contractor-submitted change orders; Assists with leading on-site engineers and inspectors to effectively observe work in progress in accordance with project requirements and to ensure that project records are properly maintained; Reviews and validates daily inspection reports; Ensure high-levels of safety and quality are being maintained by the contractor, implements and follows Company / owner / project-specific safety and quality protocols, and participates in safety and quality meetings & audits as necessitated by the project requirements; Monitors the progress of the project in accordance with contract cost and schedule, including project timelines and specifications, and attends / assists in administering progress meetings as required; Ensures all project documentation is completed and submitted as required, and completes necessary project close-out processes; Coordinates contractor access and protection requests including track outages / GOs, foul time, property access requests, flag protection, and force-account labor (i.e., track, signal, power, and other owner-employed disciplinary labor groups); All other related duties as assigned. QUALIFICATIONS A minimum of 4 years of progressive experience working on rail transit projects with rail transit systems such as New York City Transit (subways), Long Island Rail Road, Metro North Railroad, Amtrak, New Jersey Transit (passenger and light rail systems), PATH, PATCO, or PANYNJ AirTrain systems; experience working on freight rail systems will also be considered for select rail systems projects; Bachelor Degree in Engineering, Construction Management, or Architecture is required; Valid PE License highly preferred; Valid RA License, or CCM Certification, preferred; Ability to understand and interpret written specifications, plans, and construction documents for work orders and build documents; Ability to effectively and tactfully communicate with clients, supervisors, and inspectors regarding project status and issues, drawings, specifications and qualification test results; Detail-oriented, with capability to detect non-conformities and complete detailed reports in a timely manner; Experience interpreting and supervising the execution of various rail and construction industry standards & requirements (national and owner-based); Must be willing to work nights and weekends as needed; Valid, clean driver's license and personal vehicle to travel to job sites is preferred. PHYSICAL REQUIREMENTS While performing the essential functions of this position, the employee is frequently required to assume a stationary position, handle, inspect, and/or feel documents, materials and/or equipment relevant to the job and communicate about same. The employee is also regularly required to move around on project sites and within buildings and other structures, including ascending or descending the landscape or on a ladder, and positioning themselves appropriately to access necessary testing materials and equipment, frequently for prolonged periods of time. For rail transit projects, the job-site will often consist of hazards associated with an operating rail transit system, including but not limited to: trains traveling at high rates of speed adjacent to the work area, electrified third rail or catenary wire, stone ballast walking surfaces, track systems including running rail, concrete or creosote-soaked timber ties, and uneven ballast surfaces. The employee must regularly lift and/or move up to 30 lbs, and sometimes lift and/or move up to 55 lbs. The employee is constantly working in outdoor weather conditions, including exposure to extreme heat, extreme cold, and precipitation. The employee will also communicate with colleagues, supervisors and clients utilizing Corporate and client e-mail and telephone systems. Employees may also be required to undergo substance abuse testing in accordance with project requirements, US DOT Regulations, and/or Company policy. The employee may occasionally be required to operate a computer, as well as other related office machinery, such as calculators, printers, and copy machines. This position also may require the regular operation of a motor-vehicle, which may require remaining stationary for extended periods of time. The physical demands described above are representative of those that must be met by an employee to successfully perform essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPETITIVE SALARY AND BENEFITS PACKAGE Tectonic offers competitive salaries along with a comprehensive benefits package that includes: Opportunities for mentoring, professional development, and career advancement Tuition reimbursement to advance education Paid time off, including vacation, sick leave, and personal days Company-observed, paid holidays 401(k) retirement plan with profit-sharing opportunities Comprehensive group medical insurance, including health, dental, vision, and life coverage High Deductible Health Plan (HDHP) option paired with a Health Savings Account (HSA) Flexible spending accounts (FSAs) for medical expenses and dependent care Commuter benefits for public transportation costs Short and long-term disability coverage Employee Assistance Program PAY RANGE Tectonic's goal is to compensate employees fairly and equitably across all positions Companywide. Our advertised pay ranges are representative of our good faith effort to provide a reasonable anticipated salary range. The offered pay may be outside of the provided salary range based upon the selected candidate's work location, experience, education, certifications, and capabilities compared to the advertised position. Pay Range: $100,000 - $160,000 / year Tectonic is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law. Employment decisions are based on qualifications, merit, and business needs. Tectonic participates in USCIS E-Verify to verify employment authorization.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will You Do: The Pratt & Whitney Hot Section Module Center Manufacturing Engineering Organization is seeking a highly motivated individual to support the production of turbine airfoils. Responsibilities: * Day-to-day leadership, direction & coordination of Pratt & Whitney support organizations and suppliers focusing on application of advanced coating systems * Process development, staffing and training, as well as the installation and startup of advanced coating equipment, which includes surface preparation and overlay coating finishing equipment * Create technical requirements and optimize process parameters required to support the overlay coating processes * Support and setup of the organizational infrastructure within the manufacturing environment ranging from business data collection and design of suitable metrics to characterize plant performance, to the operational details of material and part flow during the advanced coating process * Policy creation and deployment in the areas of EHS, lean manufacturing, quality, cost reduction, and customer satisfaction * Keep current on status and recent developments in the plant / industry / profession * Embrace CORE, promote principles and contribute to achieving/maintaining goals as a team * Ensure World Class safety culture is maintained and respond to all EH&S requirements promptly * Promote corporate code of ethical standards and business practice and company policies Qualifications You Must Have: * Bachelor's Degree in Industrial, Materials Science, Mechanical, or Chemical Engineer /5+ years related experience (a comparable combination of education & experience will be considered) * Experience with thermal barrier coatings (Electron Beam Physical Vapor Deposition-EBPVD) or plasma spraying process (Air Plasma Spray-APS) a plus * Six Sigma green or black belt training and/or lean manufacturing training a plus * Excellent customer service skills required providing a high level of service to satisfy/fulfill internal or external needs accurately in a timely manner * Ability to work in a high energy, fast paced manufacturing environment with the ability to adapt to changing business conditions * U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What You Will You Do: The Pratt & Whitney Hot Section Module Center Manufacturing Engineering Organization is seeking a highly motivated individual to support the production of turbine airfoils. Responsibilities: Day-to-day leadership, direction & coordination of Pratt & Whitney support organizations and suppliers focusing on application of advanced coating systems Process development, staffing and training, as well as the installation and startup of advanced coating equipment, which includes surface preparation and overlay coating finishing equipment Create technical requirements and optimize process parameters required to support the overlay coating processes Support and setup of the organizational infrastructure within the manufacturing environment ranging from business data collection and design of suitable metrics to characterize plant performance, to the operational details of material and part flow during the advanced coating process Policy creation and deployment in the areas of EHS, lean manufacturing, quality, cost reduction, and customer satisfaction Keep current on status and recent developments in the plant / industry / profession Embrace CORE, promote principles and contribute to achieving/maintaining goals as a team Ensure World Class safety culture is maintained and respond to all EH&S requirements promptly Promote corporate code of ethical standards and business practice and company policies Qualifications You Must Have: Bachelor's Degree in Industrial, Materials Science, Mechanical, or Chemical Engineer /5+ years related experience (a comparable combination of education & experience will be considered) Experience with thermal barrier coatings (Electron Beam Physical Vapor Deposition-EBPVD) or plasma spraying process (Air Plasma Spray-APS) a plus Six Sigma green or black belt training and/or lean manufacturing training a plus Excellent customer service skills required providing a high level of service to satisfy/fulfill internal or external needs accurately in a timely manner Ability to work in a high energy, fast paced manufacturing environment with the ability to adapt to changing business conditions U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract Learn More & Apply Now: In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Job DescriptionDescription: Education: 4 Year Degree - Bachelor of Science in Engineering Field Experience: 10+ years of onsite building commissioning systems and vertical construction experience. Clearance and Qualifications: Must possess an active Common Access Card (CAC) in order to allow access to the field construction management database on the Government assigned computer. Government Security Background and Drug testing are required. Position Location: West Point, New York Computer Knowledge: Familiarity with tracking software database such as Procore, ProjNet, Suretrak, or Ebuilder. Computer software products such as Excel, Word, Adobe PDFs, Microsoft Projects, Primavera Scheduling Software, and AutoCAD. Previous Employment Exposure: DOE, NAVFAC, DOD preferred Work Duration: Fulltime. The typical workweek is five (5) days a week, eight (8) hours per day, work in the field 80% of the time, while providing 20% of the time daily reporting to Owner project management team. Day-To-Day Construction Knowledge: Responsible for providing any or all the following representative services over the course of their assignment(s) related to Site, Civil, Mechanical, Electrical, HVAC, Plumbing, Low Voltage Communications, and Fire Protection systems. Document TAB and commissioning efforts, monitor testing and Inspection 3rd Party Agency activities. Prepare daily QA reports, perform site surveys, collect existing condition data in the field, documenting QA inspections on the Owner behalf. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Requirements: Other Daily Position Qualifications: Must possess good written skills for daily inspection reports, and other correspondence between Owner and Contractors. Must possess good oral skills for leadership role and public speaking at meetings Must possess good organizational skills for tracking construction management documents (including but not limited to: Project Photographs, Technical Submittals, Shop Drawings, Risk Register, Request for Information, etc.) Must provide Owner Oversight via Quality Assurance inspections, Must create open punch list items daily and summarize weekly. Must closeout activities like as-built reviews, O&M reviews, and warranty reviews. Must function as a liaison between Owner and contractors Must perform tasks as quality inspector to maintain conformance with specifications.

The primary functions of this role are to: 1) lead development/optimization/modification of robotics & automation solutions to meet evolving Global R&D needs and 2) apply a functional understanding of laboratory automation to create greater value and/or eliminate wasted effort/cost. Without supervision the incumbent must be: * Proficient in developing and executing automation & robotic solutions to achieve desired goals or results. Proficient in performing against multiple projects in parallel. Mentor junior employees on activities execution to exploit new skills and ways of thinking. * Proficient in analyses (statistical, if needed) of data to uncover new findings from R&D work. Train and develop junior employees. With broad supervision and coaching, the incumbent is expected to: * Demonstrate the ability to identify and improve (streamline or increase value) R&D processes or activities being worked to create greater value and/or eliminate wasted effort/cost. With broad supervision, develops ability to transform insights into optimization recommendations for R&D activities being worked. * Develop insights from laboratory automation and ability to develop key problem statements and fundamental understanding of technical models and/or mechanisms by connecting data sets with current organizational or industry knowledge and applying these to the R&D projects and activities being worked. With supervision and coaching, the incumbent is expected to develop: * insights from "project level" R&D work. * develop and communicate fundamental understanding insights from automation projects and apply these insights across R&D activities or disciplines to change and improve the direction of these activities or the way in which these activities are performed. * ability to create and deploy efficient strategic "project level" plans for technology delivery and/or capability-building and/or capacity-building to achieve desired goals or results. Additionally, adherence to and compliance with all Company wide and R&D specific policies and procedures is required. Qualifications: * BS/BS degree in Engineering, Laboratory Sciences or related field * Minimum 3 years of experience delivering laboratory automation & robotics systems in manufacturing or industrial laboratory environments. * Proficiency in programming languages such as Python, LabVIEW, C/C++, or MATLAB. * Experience with automated test frameworks and data acquisition systems. * Strong analytical and problem-solving skills. * Excellent communication, collaboration and documentation skills Duracell is the world's leading manufacturer and marketer of high-performance alkaline batteries, complemented by a portfolio of high quality, market leading specialty, rechargeable and professional batteries. Duracell's products power numerous critical professional devices across the globe such as heart rate monitors, defibrillators, telemetry devices, smoke detectors, fire alarms, automated valves and security systems. As the leader in the professional power category, Duracell has a rich history of innovation, continuously introducing batteries that are smaller, thinner, with more energy and longer lasting than competitive brands. Since March 2016, Duracell has found its permanent home within Berkshire Hathaway (ranked #4 World's Most Admired Companies by Fortune Magazine and #3 in the Fortune 500), and will continue to focus on sustainable growth, industry-leading innovation while creating long-term value for our customers and consumers. At Duracell, integrity, end-to-end accountability across all levels, fast decision-making and a "can do" attitude is highly valued.

Employment Type: Full-Time FSLA: Salary/Exempt Division: Project Management Department: Project Management Reports to: Senior Project Manager / Project Executive / Director, Project Executive Supervisory Duties: Yes Salary Range: $75,000 - $85,000 The Project Engineer (PE) will be primarily responsible for obtaining, distributing and reporting on critical project information to the project stakeholders. In this role, the PE will coordinate with subcontractors, vendors and consultants. The PE is the on-site expert on the status of submittals, Request for Information (RFIs), materials, safety documentation, drawing updates, and all other relevant project documents. PEs participate in the Consigli Project Engineer Academy, a year-long program designed to give our PEs a leg up in the industry through expert training and continuous development. Through this program, new PEs will gain pertinent industry knowledge and skills while also building their network within Consigli through interactive group activities. Responsibilities / Essential Functions * Document Control - Ensure timely and accurate management of all project documentation: * Distribute all design changes/updates to the entire project team and all subcontractors. * RFIs: Prepare and submit requests for information to the design team and distribute all responses to the appropriate parties. * Submittals: Create and manage the submittal log for the project. Obtain required submittals from subcontractors, review for compliance with the specifications and submit to the design team for review via Procore system software. * Safety Documentation: Upload subcontractor safety documentation to Procore. Notify subcontractors of missing paperwork and follow up until it is provided. Conduct safety walk-throughs with Superintendent and Safety Manager. * Enrollment, and compliance tracking of subcontractor insurance certificates. * Field Reporting: Ensure field activities are tracked and reported to related parties. * Punch List: Upload and distribute the punch list through Procore to subcontractors. Assist with coordinating work completion as required and maintain an accurate log of items to be completed. * Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive resolution. * Safety: perform regular safety walks with field and safety staff and record observations. * Photos: track project progress with photos of the job site on a regular basis. Photos shall be tagged and uploaded to Procore. * Material Delivery: Thorough knowledge of anticipated delivery dates for materials and equipment to the site. * Create, update and maintain an accurate material delivery log for all materials and equipment on the project. * Obtain current information from subcontractors on a consistent basis regarding the status of their materials and when they are expected onsite. * Ensure timely communication of potential delays to the entire project team. * Understand and communicate long lead item impacts to the design team during the submittal review process and request expediting of submittal review where required. * Material verification on-site: confirm the delivered material corresponds to the submitted material to avoid potential field issues. * Project Meetings: * Generate and update agendas for the various project meetings with input from the project team. * Track project meeting commitments and action items and distribute minutes to project stakeholders in a timely manner. * Reporting: report on, at a minimum, submittals, RFI's and critical project issues. * Coordinate and support pre-job and subcontractor safety and quality meetings. * Collaboration and Coordination: * Interface with client and design team throughout the entire project. * Develop relationships with all stakeholders on the project. * Collaborate with the other team members in establishing and implementing project goals. * Management and inventory of job site office consumables. * Communicate with subcontractors on a daily basis. Key Skills * Strong ability to work within a team environment. * Persistence and strong initiative. * Excellent organizational skills * Time management/prioritization. * Strong communication skills (written and oral). * Flexibility and willingness to learn. * Critical thinking and desire to solve problems. Required Experience * A bachelor's degree in engineering, Construction Management or Architecture preferred. * Prior internship experience is a plus. * Basic understanding of construction including schedule logic, budgets and project documentation. * Microsoft Office proficiency is required. * OSHA 10 Hour and OSHA 30 preferred. * Additional experience may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

We are currently hiring in our Buildings Engineering Division at our White Plains, NY and Brooklyn, NY offices. LaBella is on the cutting edge of energy efficiency and renewable energy projects that help our clients reduce their energy usage and carbon footprints. Our Energy and Commissioning group is looking for an entry or junior level Energy Engineer with 2-5+ years of experience. This individual will serve a key function in seeing our downstate energy projects from initial feasibility study through construction and commissioning. This is an exciting opportunity to help LaBella's energy group impact the future of our community and climate. LaBella's Building Engineering Departments provides our employees a collaborative, professional working environment, allowing for personal growth and responsibility on a variety of significant projects that serve our target markets. The Energy engineer will work with other engineers and project managers as part of a project team to support the development of concepts, strategies, designs, drawings, specifications and reports for new Building and Renovation projects with an Energy and/or Commissioning focus Responsibilities * Perform energy audits and feasibility studies to identify Energy Conservation Measures. * Complete utility data analysis and evaluation of energy usage. * Perform basic energy savings calculations, making educated assumptions when applicable and using / interpreting data gathered from the field to estimate savings. * Develop design concepts in technical documentation. May assist with mechanical design projects as required. * Able to interpret complex plans and specifications and apply available information to ensure that all project design requirements are satisfied. * Plan, perform and document the commissioning of various Mechanical and Electrical Systems to ensure the intended operation. * Conduct on-site investigation and inspection of multi-discipline projects. * Takes a lead role in resolving construction problems, procedures, and methods. * Maintain familiarity with appropriate engineering and construction codes.

At MVP Health Care, we're on a mission to create a healthier future for everyone - which requires innovative thinking and continuous improvement. To achieve this, we're looking for a **Facility Contracto** r to join #TeamMVP. This is the opportunity for you if you have a passion for contract negotiation, healthcare, and network management. **What's in it for you:** + Growth opportunities to uplevel your career + A people-centric culture embracing and celebrating diverse perspectives, backgrounds, and experiences within our team + Competitive compensation and comprehensive benefits focused on well-being + An opportunity to shape the future of health care by joining a team recognized as a **Best Place to Work For in the NY Capital District** , one of **the Best Companies to Work For in New York** , and an **Inclusive Workplace** . **Qualifications you'll bring:** + Bachelor's Degree preferred; equivalent experience may be substituted if the candidate can demonstrate significant relevant work experience. + Minimum of 5 years in health insurance or equivalent experience in Finance or Project Management. + Strong proficiency in problem solving and analysis + Ability to use Microsoft Office and Power Point + Proficiency in Excel. Must be able to manipulate pivot tables, utilize mathematical formulas, filter data, etc. + Excellent presentation skills + Proficiency in financial impact analysis + Curiosity to foster innovation and pave the way for growth + Humility to play as a team + Commitment to being the difference for our customers in every interaction **Your key responsibilities:** + Coordinates with Analytics Team to generate performance reporting and associated financial models. + Assists Leaders in leveraging of competitive transparency data during contract negotiation and annual performance reviews. + Assists with developing contract documents for renewals and/or amendments in compliance with company templates, reimbursement structure standards and other key process controls. + Supports the business relationships with Hospital, Physician and Ancillary Facilities. + Maintains an inventory of contracts, due dates, term clauses/end dates, spend and services by LOB. + Requests necessary data analytics from Informatics to support key business objectives and product objectives where contracting is involved. + Keeps and maintains necessary database trackers and a tracking system for department and MVP report outs. + Processes forms, tracks and scans signed/executed agreements and amendments. + Serves as the primary point of contact for day-to-day issues such as payment issues, authorization issues and contractual language interpretation disputes. + Ability to maintain confidentiality and adhere to regulatory compliance issues as they exist and change from time to time. + Proactive in identifying areas for efficiency improvement across all of Network Management; consistently challenges the status quo in favor of incremental improvement opportunities that could be achieved through new methods. + Contribute to our humble pursuit of excellence by performing various responsibilities that may arise, reflecting our collective goal of enhancing healthcare delivery and being the difference for the customer. **Where you'll be:** Location: Hybrid to Schenectady, NY or Fishkill, NY **Pay Transparency** MVP Health Care is committed to providing competitive employee compensation and benefits packages. The base pay range provided for this role reflects our good faith compensation estimate at the time of posting. MVP adheres to pay transparency nondiscrimination principles. Specific employment offers and associated compensation will be extended individually based on several factors, including but not limited to geographic location; relevant experience, education, and training; and the nature of and demand for the role. We do not request current or historical salary information from candidates. **MVP's Inclusion Statement** At MVP Health Care, we believe creating healthier communities begins with nurturing a healthy workplace. As an organization, we strive to create space for individuals from diverse backgrounds and all walks of life to have a voice and thrive. Our shared curiosity and connectedness make us stronger, and our unique perspectives are catalysts for creativity and collaboration. MVP is an equal opportunity employer and recruits, employs, trains, compensates, and promotes without discrimination based on race, color, creed, national origin, citizenship, ethnicity, ancestry, sex, gender identity, gender expression, religion, age, marital status, personal appearance, sexual orientation, family responsibilities, familial status, physical or mental disability, handicapping condition, medical condition, pregnancy status, predisposing genetic characteristics or information, domestic violence victim status, political affiliation, military or veteran status, Vietnam-era or special disabled Veteran or other legally protected classifications. To support a safe, drug-free workplace, pre-employment criminal background checks and drug testing are part of our hiring process. If you require accommodations during the application process due to a disability, please contact our Talent team at ******************** . **Job Details** **Job Family** **Network Management & Development** **Pay Type** **Salary** **Hiring Min Rate** **61,820 USD** **Hiring Max Rate** **92,000 USD**

**Country:** United States of America ** Onsite **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? **What You Will You Do:** The Pratt & Whitney Hot Section Module Center Manufacturing Engineering Organization is seeking a highly motivated individual to support the production of turbine airfoils. Responsibilities: + Day-to-day leadership, direction & coordination of Pratt & Whitney support organizations and suppliers focusing on application of advanced coating systems + Process development, staffing and training, as well as the installation and startup of advanced coating equipment, which includes surface preparation and overlay coating finishing equipment + Create technical requirements and optimize process parameters required to support the overlay coating processes + Support and setup of the organizational infrastructure within the manufacturing environment ranging from business data collection and design of suitable metrics to characterize plant performance, to the operational details of material and part flow during the advanced coating process + Policy creation and deployment in the areas of EHS, lean manufacturing, quality, cost reduction, and customer satisfaction + Keep current on status and recent developments in the plant / industry / profession + Embrace CORE, promote principles and contribute to achieving/maintaining goals as a team + Ensure World Class safety culture is maintained and respond to all EH&S requirements promptly + Promote corporate code of ethical standards and business practice and company policies **Qualifications You Must Have:** + Bachelor's Degree in Industrial, Materials Science, Mechanical, or Chemical Engineer /5+ years related experience (a comparable combination of education & experience will be considered) + Experience with thermal barrier coatings (Electron Beam Physical Vapor Deposition-EBPVD) or plasma spraying process (Air Plasma Spray-APS) a plus + Six Sigma green or black belt training and/or lean manufacturing training a plus + Excellent customer service skills required providing a high level of service to satisfy/fulfill internal or external needs accurately in a timely manner + Ability to work in a high energy, fast paced manufacturing environment with the ability to adapt to changing business conditions + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract **Learn More & Apply Now:** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 66,000 USD - 130,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Tectonic is currently seeking a full-time Project Engineer to join our Newburgh, NY Office. This position offers an exciting opportunity for professional growth and advancement and to work closely with a diverse group of Professional Engineers! ESSENTIAL FUNCTIONS Work on multiple telecommunication site projects, including new site builds, site modifications, and small cells, including attending site meetings and performing site visits; Design, review, and finalize engineering plans; Generate engineering reports to satisfy codes and client standards; Coordinate, prepare, and review building and fire department permit documentation; Work with and manage a team of engineers and designers to fulfill project requirements; Perform and coordinate on-site construction inspections and final sign-offs; Maintain and update project excel trackers; Coordinate and communicate with the client as needed; All related duties as assigned. QUALIFICATIONS BS Degree in Civil Engineering; MSCE and/or EIT is a plus; 2-4 years of relevant telecommunications and renewable energy experience, with the ability to complete projects in a timely manner within budget; Strong organizational skills, as well as excellent oral and written communication skills and a demonstrated focus on accuracy and attention to detail; Knowledge of AutoCAD 2024 or newer and moderate proficiency with Microsoft Office Suite; A valid, clean driver's license and a personal vehicle, as travel to project sites may be required PHYSICAL REQUIREMENTS While performing the essential functions of this position, the employee is often required to assume a stationary position, and regularly perform tasks that require the handling, inspection, and/or feeling of documents, materials, and/or equipment relevant to the job and communicate about same. Occasionally, the employee will need to move around on the job-site, sometimes while lifting and/or moving equipment up to 25 lbs and/or in hazardous weather conditions. The employee must be able to safely operate a motor-vehicle, in which they may be required to remain stationary for a prolonged period of time. They must be able to receive and convey detailed or important information with others using the Corporate e-mail system, telephone system, and conferencing systems.The physical demands described above are representative of those that must be met by an employee to successfully perform essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPETITIVE SALARY & BENEFITS PACKAGE Tectonic offers competitive salaries along with a comprehensive benefits package that includes: Opportunities for mentoring, professional development and career advancement Tuition reimbursement to advance education Paid time off, including vacation, sick leave, and personal days Company-observed, paid holidays 401(k) retirement plan with profit-sharing opportunities Comprehensive group medical insurance, including health, dental, vision, and life coverage High Deductible Health Plan (HDHP) option paired with a Health Savings Account (HSA) Flexible spending accounts (FSAs) for medical expenses and dependent care Commuter benefits for public transportation costs Short and long-term disability coverage Employee Assistance Program PAY RANGE Tectonic's goal is to compensate employees fairly and equitable across all positions Companywide. Our advertised pay ranges are representative of our good faith effort to provide a reasonable anticipated salary range. The offered pay may be outside of the provided salary range based upon the selected candidate's work location, experience, education, certifications, and capabilities compared to the advertised position. Pay Range: $73,000 - $84,000 / year Tectonic is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law. Employment decisions are based on qualifications, merit, and business needs. Tectonic participates in USCIS E-Verify to verify employment authorization.

This position is temporarily located out of Bethel, CT immediately, with relocation to the greater Atlanta Metro Atlanta at a later date, expected timing summer 2026. The primary functions of this role are to 1) lead development/optimization/modification of robotics & automation solutions to meet evolving Global R&D needs and 2) apply a functional understanding of laboratory automation to create greater value and/or eliminate wasted effort/cost. • BS/BS degree in Engineering, Laboratory Sciences or related field • Minimum 3 years of experience delivering laboratory automation & robotics systems in manufacturing or industrial laboratory environments. • Proficiency in programming languages such as Python, LabVIEW, C/C++, or MATLAB. • Experience with automated test frameworks and data acquisition systems. • Strong analytical and problem-solving skills. • Excellent communication, collaboration and documentation skills Without supervision the incumbent must be: 1. proficient in developing and executing automation & robotic solutions to achieve desired goals or results. Proficient in performing against multiple projects in parallel. Mentor junior employees on activities execution to exploit new skills and ways of thinking. 2. proficient in analyses (statistical, if needed) of data to uncover new findings from R&D work. Train and develop junior employees. With broad supervision and coaching, the incumbent is expected to: 1. demonstrate the ability to identify and improve (streamline or increase value) R&D processes or activities being worked to create greater value and/or eliminate wasted effort/cost. With broad supervision, develops ability to transform insights into optimization recommendations for R&D activities being worked. 2. develop insights from laboratory automation and ability to develop key problem statements and fundamental understanding of technical models and/or mechanisms by connecting data sets with current organizational or industry knowledge and applying these to the R&D projects and activities being worked. With supervision and coaching, the incumbent is expected to develop: 1. insights from “project level” R&D work. 2. develop and communicate fundamental understanding insights from automation projects and apply these insights across R&D activities or disciplines to change and improve the direction of these activities or the way in which these activities are performed. 3. ability to create and deploy efficient strategic “project level” plans for technology delivery and/or capability-building and/or capacity-building to achieve desired goals or results. Additionally, adherence to and compliance with all Company wide and R&D specific policies and procedures is required.

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Salary Range: $77,000.00 - $83,000.00 Division: Project Management Department: Project Management Reports to: Senior Project Manager / Project Executive / Director, Project Executive Supervisory Duties: Yes The Project Engineer (PE) will be primarily responsible for obtaining, distributing and reporting on critical project information to the project stakeholders. In this role, the PE will coordinate with subcontractors, vendors and consultants. The PE is the on-site expert on the status of submittals, Request for Information (RFIs), materials, safety documentation, drawing updates, and all other relevant project documents. PEs participate in the Consigli Project Engineer Academy, a year-long program designed to give our PEs a leg up in the industry through expert training and continuous development. Through this program, new PEs will gain pertinent industry knowledge and skills while also building their network within Consigli through interactive group activities. Responsibilities / Essential Functions Document Control - Ensure timely and accurate management of all project documentation: Distribute all design changes/updates to the entire project team and all subcontractors. RFIs: Prepare and submit requests for information to the design team and distribute all responses to the appropriate parties. Submittals: Create and manage the submittal log for the project. Obtain required submittals from subcontractors, review for compliance with the specifications and submit to the design team for review via Procore system software. Safety Documentation: Upload subcontractor safety documentation to Procore. Notify subcontractors of missing paperwork and follow up until it is provided. Conduct safety walk-throughs with Superintendent and Safety Manager. Enrollment, and compliance tracking of subcontractor insurance certificates. Field Reporting: Ensure field activities are tracked and reported to related parties. Punch List: Upload and distribute the punch list through Procore to subcontractors. Assist with coordinating work completion as required and maintain an accurate log of items to be completed. Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive resolution. Safety: perform regular safety walks with field and safety staff and record observations. Photos: track project progress with photos of the job site on a regular basis. Photos shall be tagged and uploaded to Procore. Material Delivery: Thorough knowledge of anticipated delivery dates for materials and equipment to the site. Create, update and maintain an accurate material delivery log for all materials and equipment on the project. Obtain current information from subcontractors on a consistent basis regarding the status of their materials and when they are expected onsite. Ensure timely communication of potential delays to the entire project team. Understand and communicate long lead item impacts to the design team during the submittal review process and request expediting of submittal review where required. Material verification on-site: confirm the delivered material corresponds to the submitted material to avoid potential field issues. Project Meetings: Generate and update agendas for the various project meetings with input from the project team. Track project meeting commitments and action items and distribute minutes to project stakeholders in a timely manner. Reporting: report on, at a minimum, submittals, RFI's and critical project issues. Coordinate and support pre-job and subcontractor safety and quality meetings. Collaboration and Coordination: Interface with client and design team throughout the entire project. Develop relationships with all stakeholders on the project. Collaborate with the other team members in establishing and implementing project goals. Management and inventory of job site office consumables. Communicate with subcontractors on a daily basis. Key Skills Strong ability to work within a team environment. Persistence and strong initiative. Excellent organizational skills Time management/prioritization. Strong communication skills (written and oral). Flexibility and willingness to learn. Critical thinking and desire to solve problems. Required Experience A bachelor's degree in engineering, Construction Management or Architecture preferred. Prior internship experience is a plus. Basic understanding of construction including schedule logic, budgets and project documentation. Microsoft Office proficiency is required. OSHA 10 Hour and OSHA 30 preferred. Additional experience may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

The primary functions of this role are to: 1) lead development/optimization/modification of robotics & automation solutions to meet evolving Global R&D needs and 2) apply a functional understanding of laboratory automation to create greater value and/or eliminate wasted effort/cost. Qualifications: BS/BS degree in Engineering, Laboratory Sciences or related field Minimum 3 years of experience delivering laboratory automation & robotics systems in manufacturing or industrial laboratory environments. Proficiency in programming languages such as Python, LabVIEW, C/C++, or MATLAB. Experience with automated test frameworks and data acquisition systems. Strong analytical and problem-solving skills. Excellent communication, collaboration and documentation skills Without supervision the incumbent must be: Proficient in developing and executing automation & robotic solutions to achieve desired goals or results. Proficient in performing against multiple projects in parallel. Mentor junior employees on activities execution to exploit new skills and ways of thinking. Proficient in analyses (statistical, if needed) of data to uncover new findings from R&D work. Train and develop junior employees. With broad supervision and coaching, the incumbent is expected to: Demonstrate the ability to identify and improve (streamline or increase value) R&D processes or activities being worked to create greater value and/or eliminate wasted effort/cost. With broad supervision, develops ability to transform insights into optimization recommendations for R&D activities being worked. Develop insights from laboratory automation and ability to develop key problem statements and fundamental understanding of technical models and/or mechanisms by connecting data sets with current organizational or industry knowledge and applying these to the R&D projects and activities being worked. With supervision and coaching, the incumbent is expected to develop: insights from “project level” R&D work. develop and communicate fundamental understanding insights from automation projects and apply these insights across R&D activities or disciplines to change and improve the direction of these activities or the way in which these activities are performed. ability to create and deploy efficient strategic “project level” plans for technology delivery and/or capability-building and/or capacity-building to achieve desired goals or results. Additionally, adherence to and compliance with all Company wide and R&D specific policies and procedures is required.