Mechanical engineering internship jobs in Wilmington, NC

This role is for a Hot Gas Path (HGP) Engineer who supports gas turbines by creating computer models, running engineering analyses, and helping solve part failures. Key Responsibilities Build 2D/3D models of turbine parts. Run thermal, structural, and vibration analyses using Classic ANSYS. Evaluate part life (fatigue, creep, oxidation, etc.). Prepare and present results in PowerPoint. Support root cause investigations (RCA). Review engineering drawings and models. Requirements Must be a U.S. person 4+ years engineering experience with gas turbines. 2+ years using Classic ANSYS and 2+ years with UG/NX. Experience with RCA, GD&T, and Teamcenter/PLM tools. Strong communication and teamwork skills. Bachelor's degree required; Master's preferred. Flexible working hours.

Akkodis is seeking a Mechanical Design Engineer onsite in Durham, NC. Looking for candidates with experience with Solidworks and have an engineering degree. Pay Range: $30 an hour if Bachelors Degree on a W2 contract. $32.50 an hour if Masters Degree on a W2 contract $36 an hour if PHD on a W2 contract *Willing to hire candidates who are 3 months away from graduation and be able to work 30+ hours a week. *Cannot do C2C. Role: Mechanical Design Engineer Location: Durham NC Responsibilities The position will serve as a contractor supporting existing design engineering colleagues in project execution activities, which will include the following types of activities: 3D CAD modeling in Solidworks, creation of part/assembly drawings in Solidworks, assisting with procurement of prototype parts, assembly and testing of prototype systems, processing/reviewing test data, etc. The position will be responsible for spending time in the lab disassembling and building up assemblies to better learn and understand the mechanics, operation and functionality of these components and assemblies. This engineer will also help with general engineering needs within the mechanical design engineering group, as time permits and needs come up during the term of the contract. Produce technical drawings, BOM's and product documentation in collaboration with the CAD and PLM team Perform calculations in support of component design and part selection Support building and testing of prototypes systems in a laboratory environment Assist with coordination of engineering and testing activities within and across R&D test labs Communicate and present information in a clear and concise manner to key stakeholders in a cross functional matrixed organization Contribute to problem solving and technical support, including design updates of equipment, process development and related documentation. Requirements Requirements Bachelor's or Master's degree with a concentration in Mechanical / Electromechanical Engineering Demonstrated experience with SolidWorks 3D Engineering Design Software (Solidworks CSWA certification or equivalent skills is a plus) Experience with industrial Pneumatic or Hydraulic systems is a plus Equal Opportunity Employer/Veterans/Disabled (No Bonus) Benefit offerings include medical, dental, vision, term life insurance, short-term disability insurance, additional voluntary benefits, commuter benefits, and a 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State, or local law; and Holiday pays upon meeting eligibility criteria. If you are interested in this role, then please click APPLY NOW. Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to : Medical Dental Vision To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Perigon is accepting resumes for a Mechanical/HVAC Engineer for a career in a consulting engineering environment working with industrial clients. The ideal candidate will have consulting experience in the design of industrial HVAC and controls, plumbing and fire protection. This position also involves being a technical point of contact with clients. This is a full-time position to work with our existing Mechanical Engineering staff. This position offers opportunities for career growth, training, and exposure to a wide variety of clients, processes, and technologies. Responsibilities Solving diverse and open-ended design problems facing industrial clients. Design of Mechanical/HVAC systems for manufacturing facilities including dust collection, fume collection, cleanroom design, energy conservation, and sustainable solutions. Identifying, selecting, and recommending mechanical / HVAC - related equipment and solutions for clients. Preparing key client deliverables; including but not limited to; design calculations, equipment specifications, technical reports, and drawing packages. Support of construction by responding to RFI's, submittals and site visits. Requirements BS in Mechanical Engineering Active PE License with NCEES record (preferred) and ability to obtain comity licensures in other States. 3+ years as a Mechanical/HVAC engineer with projects in manufacturing and industrial sectors. Proficiency with Autocad. Proficiency with Mechanical/HVAC software design tools (Ex: Autocad MEP, Trane Software Programs, Carrier Software Programs, etc.). Proficiency with Bentley AutoPIPE or Caesar II a plus. Experience with inter-discipline project coordination.

We're Hiring: Senior Mechanical Engineer (Design-Build Focus) We're a nationally recognized engineering and design firm looking for a Senior Mechanical Engineer to join our growing team. Our approach is different-we start with the end in mind and challenge conventional thinking to deliver the best value and best design for every project. We take the time to understand our clients' goals, operations, and long-term needs, balancing first cost, operational cost, and life cycle value. We serve Fortune 500 clients across the Institutional, Commercial, and Industrial markets, and there's no project we can't tackle. With multiple regional offices and a strong reputation in the industry, we're proud to be one of the largest engineering/design firms by revenue in our region. This position is based in Granite City, IL, and offers the opportunity to collaborate with talented professionals across our network. What You'll Do Lead mechanical design and implementation projects, ensuring we meet timelines, budgets, and quality standards. Design and specify mechanical systems with a focus on energy efficiency, cost-effectiveness, and compliance. Perform load calculations, airflow analyses, and other technical assessments. Ensure our designs meet all relevant codes and standards (ASHRAE, LEED, NFPA, etc.). Prepare and review technical documents, including drawings, specifications, and cost estimates. Oversee installation, testing, and commissioning of HVAC systems. Mentor junior engineers and provide technical leadership to our project teams. Work closely with clients to understand their needs and deliver tailored solutions. What We're Looking For A Bachelor's degree in Mechanical Engineering or a related field. 8+ years of experience in mechanical design or design-build roles, especially in HVAC and piping systems. A Professional Engineer (PE) license is preferred. LEED Accreditation is a plus. Proficiency in HVAC design tools (AutoCAD, Revit, Trane Trace, Carrier HAP) and BMS systems. Strong communication and leadership skills. A team player who can manage multiple priorities while maintaining attention to detail. Benefits Compensation: $100,000-$150,000 (DOE) Vacation/PTO Medical Dental Vision 401k Bonus Relocation Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: christian.webb@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : CW7-1870991L148 -- in the email subject line for your application to be considered.*** Christian Webb - Recruiter For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 07/18/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

A manufacturing leader is looking for a Mechanical Engineer to support plant operations and drive process improvements across a high-volume facility. This role is ideal for someone who enjoys hands-on engineering, cross-functional work, and contributing to efficiency, quality, and reliability throughout production. What You'll Do • Design, develop, and improve mechanical systems, equipment, tooling, and fixtures • Evaluate and optimize production processes to reduce waste and enhance efficiency • Provide engineering support for equipment installation, troubleshooting, and reliability efforts • Develop and maintain drawings, process documentation, and SOPs • Partner with maintenance, production, and quality teams to solve operational issues • Lead root-cause investigations and implement corrective actions • Recommend equipment upgrades and improvements to reduce downtime • Support commissioning, testing, and new product/process integration • Ensure compliance with safety, environmental, and quality standards What You Bring • Bachelor's degree in Mechanical Engineering or related field • 3-5 years of mechanical or manufacturing engineering experience • Strong CAD skills (SolidWorks, AutoCAD, or similar) • Solid understanding of machine design, mechanical systems, and industrial equipment • Experience with FMEA, RCA, Lean, or CI tools • Knowledge of automation, robotics, or industrial electrical systems is a plus • Excellent communication and teamwork skills • Ability to manage multiple projects in a fast-paced environment • PE/EIT preferred but not required • Willing to participate in occasional on-call rotation Work Environment • Office and manufacturing floor • Requires standard PPE and ability to stand, walk, or climb as needed • Monday-Friday, day shift If you're a mechanical engineer who thrives in a dynamic manufacturing environment and wants to help keep a major production operation running at its best, we want to talk. Work Authorization: Applicants must have valid, independent authorization to work in the United States. This position does not offer, support, or accept any form of sponsorship-whether employer, third-party, future, contingent, transfer, or otherwise. Candidates must be able to work for any employer in the U.S. without current or future sponsorship of any kind. Work authorization will be verified, and misrepresentation will result in immediate removal from consideration.

Title: Mechanical Manufacturing Engineer Hours: AM Shift *This is NOT an entry level position, please do not apply if you do not have 3-5 years of working experience, you will not be considered at this time* Job Summary: The Manufacturing Engineer's primary function is to bridge the gap between Engineering and Operations and provide support to improve the overall efficiency and quality of the product and production cycle. Key Responsibilities: Support the mechanical (and basic electrical) assembly process by interpreting approved design models/drawings and communicating the solutions to the shop floor. Improve the overall efficiency of the plant assembly process, including fabrication and painting. Work with lead hands in production and develop engineering solutions for production issues and design errors. Assist in creating and implementing engineering change requests (ECR). Assist in improving product quality and consistency through refinements and improvements in the assembly process. Work with the Electrical and Mechanical assembly teams to ensure the build process's accuracy and support the Project Managers to ensure budget and timelines are protected. Support root-cause analysis and develop corrective measures with QA for issues that extend through the manufacturing process. Work with Engineering and Operations to develop methods, tools, jigs, etc., for improving the assembly Qualifications & Experience: College Diploma in Mechanical / Industrial Engineering Technology or University Degree in Mechanical / Industrial Engineering. Min 3-5 years of Manufacturing Engineering and manufacturing experience in fabrication and working in the production environment. Able to use SolidWorks, PDM, and ERP with at least two years of relevant experience. A minimum of one year of product design experience is required. The ability to read and interpret manufacturing drawings. Electrical knowledge would be considered an asset. Must have a valid driver's license and travel primarily in North America but potentially abroad. Additional Requirements: Demonstrated knowledge and understanding of OSHA. Understand how this position impacts the quality of products and services provided to our customers. Produce quality work (on-spec., on time, on budget) and take pride in your craft. Participate proactively in the continuous improvement process. Be self-motivated with a positive attitude and the ability to multi-task. Work well within a team environment or independently. Strong problem-solving and analytical skills. Excellent organizational, interpersonal, and communication skills. Maintain a professional, clean and safe work area.

Our client is expanding two high-growth product lines that protect critical environments for life-science, healthcare, and advanced-manufacturing customers. They need a hands-on Mechanical Engineer who loves seeing designs move from 3-D model to factory floor to finished installation. If you thrive on variety - custom equipment one week, supplier negotiations the next, and a quick site visit to verify fit-up - you'll feel right at home. What You'll Do Own mechanical design of custom modular enclosures, precision access doors, and related sub-systems in SolidWorks and Revit, delivering complete models, drawings, and BOMs. Produce manufacturable drawings, costed BOMs, and clear assembly instructions that hit quality and lead-time targets. Run FEA-based structural, vibration, and thermal studies to validate safety and performance. Source & track specialty hardware - hinges, seals, actuators, filtration interfaces - working closely with purchasing and key vendors. Coordinate with architecture, electrical, and controls teams plus outside design firms to integrate your work into overall facility layouts. Lead design-for-manufacture and continuous-improvement projects that boost throughput, reliability, and margins. Provide on-site support during fabrication, installation, and commissioning at both Midwest and Southeast facilities (≈10-15 % travel). Maintain CAD libraries, engineering change documentation, and best-practice design standards in the PLM system. What You'll Bring Bachelor's degree in mechanical engineering (or similar). 5 + years designing custom equipment, enclosures, or capital projects. Expert with SolidWorks (or comparable 3-D CAD) and comfortable integrating models into Autodesk Revit/AutoCAD plant layouts. Working knowledge of machining, sheet-metal, welding, and general fabrication processes. Familiarity with FEA tools; able to interpret standards, specs, and codes. Strong communication skills for vendor, cross-discipline, and client coordination. Organized, self-directed, and motivated by continuous improvement. Bonus Points PLM or PDM experience. Familiarity with environments requiring precise controls, such as radiation containment or contamination-free production settings. Experience guiding junior engineers or external design partners. Benefits Snapshot Competitive base salary, discretionary bonus, and full health benefits. Relocation assistance for the right candidate. Career path toward senior engineering or project-management leadership. Work with a nimble team that values innovation, craftsmanship, and getting things done. About Blue Signal: Blue Signal is a leading executive search firm, specializing in engineering recruitment. Our engineering recruiting team has expertise placing high-performing talent in areas such as electrical, mechanical, civil, and telecom engineering. Learn more at bit.ly/46IAFRJ

Maxonic maintains a close and long-term relationship with our direct client. In support of their needs, we are looking for a Principal Mechanical Engineer. Job Title: Principal Mechanical Engineer Duration: 3+ months - Part time Rate: $65/hr, Based on experience Flexible schedule - 3 days in office, averaging 20 hrs/week Job Summary: Principal mechanical engineers develop new products, redesign existing products, and perform research and testing on product concepts related to medical devices. This individual will be an important member of the Advanced Development team focused on research, development, and bringing to market medical devices to support business objectives. The successful candidate will be involved with projects covering all aspects of advanced development including concept, design, verification testing and transfer to manufacturing. Must have worked in a medical device company and familiar with regulatory and quality requirements throughout all stages of the product development life cycle. Responsibilities 1. Technical LeadTechnical leadership of system features and functions as applicable to a medical device. Expectation is this leadership requires collaboration and leading of other engineering groups. 2. Mechanical Engineering Take leadership of projects in development, managing all team members assigned to projects to keep them moving forward on schedule. Provide engineering analysis, feasibility reports and studies to assist advanced development projects. Provide broad mechanical engineering technical expertise through various phases of product life cycle. 3. Innovation Develop, design, and test innovative concepts and solutions which align with the needs of the clinic, patient and business. Collaborating with the engineering and marketing department on product feasibility. Provide mechanical engineering subject matter expertise in designing and building test setups and fixtures for various Advanced Development projects. 4. Documentation Maintain accurate documentation throughout the design process per GDP and GMP. Write product requirements and specifications to support feature. Plan, design, execute and report on system experiments as related to feature development and the product roadmap. 5. Test Methods Prove product design by developing test plans, adjusting design, running performance calculations, maintaining quality standards and approve prototypes. Validation of the test tool or setup is usually required. 6. Prototype manufacturing Lead engineering prototype builds, including generating BOMs, ordering parts and materials, and training lab technicians. Work closely with pilot manufacturing line and operations group to develop a device build process. 7. Good laboratory practice proficiency. Complete knowledge in operating critical lab equipment such as oscilloscope, microscope, acoustic tank, force balance, translation stage, impedance analyzer, pulse-echo fixture, cryostats, and training others. Experience testing PCBA and soldering parts. Technical & Functional Skill Thorough understanding of test method validation, GR&R, GD&T, and statistical analysis Solidworks or other CAD experience Understanding and application of ISO Quality System requirements and FDA regulations for medical device manufacturing Familiar with a variety of manufacturing processes including mechanical and electromechanical Minimum Qualifications Bachelor's Degree in ME, IE or EE or other relevant Engineering discipline 10+ years of related design and manufacturing experience in the medical device and/or component development industry Design Control experience including design and process verification and validation. Experience in manufacturing and assembly process development and validation (IQ, OQ, PQ) Injection molding, die casting, metal stamping and/or machining knowledge, including fixtures gauges and tooling experience Preferred Qualifications Practical knowledge of Six Sigma methodologies or SPC. Green or Black Belt certification Familiar with project management methods and tools. Travel Requirements Up to 20% Physical RequirementsThis position requires you to sit, stand and perform general office functions. You may also be required to lift up to twenty-five pounds occasionally. Bending, stooping and reaching are also frequently required Essential SkillsLead Self Time Management Digital Acumen Problem Solving Emotional Intelligence Resiliency Communication Lead Others Leadership Collaboration Project Management Motivate & Influence About Maxonic: Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients. Interested in Applying? Please apply with your most current resume. Feel free to contact Harkirat Singh (******************** / *************** for more details.

*This is an office-based position with a heavy focus on preconstruction and estimating. Primary job duties will not be on project sites or manufacturing environments.* Internship Locations: Charlotte, NC Raleigh, NC Rock Hill, SC Norcross, GA Baltimore, MD Allen, TX Phoenix, AZ Austin, TX York, PA Job Summary: As a Project Engineer Intern at SteelFab, you'll work closely with our Preconstruction and Project Management teams. You'll take on responsibilities that will enhance your skills and prepare you for a successful career in the steel construction industry. Key Responsibilities: Preconstruction Gather subcontractor pricing for new project estimates. Review and analyze subcontractor bids to ensure alignment with project specifications. Perform detailed material and labor take-offs. Prepare pricing recaps for senior leadership. Visit job sites to see job progress and build relationships with clients and vendors Fabrication Shop Week: Gain hands-on experience with SteelFab's fabrication flow and production processes to deepen your understanding of the steel construction lifecycle. Project Management Project Management duties will be based on project schedules. Example duties: Draft and issue purchase orders and subcontracts to vendors. Evaluate design drawing revisions to identify and manage scope changes effectively. Manage the coordination of construction drawings and models and review submittals. Collaborate with onsite subcontractors to identify and resolve field issues. Why SteelFab? SteelFab is the nation's largest structural steel fabricator and a proud third-generation family-owned business. When you join us, you become part of a tradition of excellence and innovation in the construction industry. Our interns benefit from: Hands-on experience and mentorship from industry professionals. Clear paths for advancement within SteelFab and opportunities to shape your career. Building relationships with teammates, vendors, and industry leaders. SteelFab's commitment to fairness, reliability, and ethical practices. Desired Candidate Attributes We are looking for Project Engineer Interns who embody the values and qualities that drive SteelFab's success. Ideal candidates will demonstrate: A passionate and energetic approach to problem-solving and customer satisfaction. The ability to multitask in a fast-paced environment. An eagerness to learn, enthusiasm for the industry, and a desire for personal and professional growth. A team-first mentality, prioritizing collective success over individual achievement. Reliability and dependability Career Progression: Project Engineer Intern Project Engineer Assistant Project Manager or Estimator Project Manager (if previously APM) Senior PM or Senior Estimator Qualifications and Requirements Major: Engineering, Construction Management, or related fields Required: Microsoft Office experience, common computer skills. Valid driver's license Preferred: Some experience in the construction or engineering industry through work, internships, or part-time employment.

Who we are With its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system - reinventing warehouse automation for increased efficiency, speed and flexibility. What we need We are looking for a talented Mechanical Engineer to join our Next Generation Structures team within our Core Engineering Org. In this role you will contribute to the entire product lifecycle, from concept to commercialization, of our cutting-edge automated systems. Your expertise in mechanical and structural systems design will be instrumental in developing reliable, efficient, and innovative solutions that bring a step change transformation in our systems. What we do The Next Generation Structures team is part of our Core Hardware Org and is a fast-growing team that specializes in innovation and new product development from concepts to commercialization. The products in focus are of strategic importance to the business. What you'll do * Contribute to the design and development of structural and electromechanical components for mobile robotic systems. * Perform analysis tasks, including FEA and tolerance analysis, to refine designs for performance, cost, and manufacturability. * Collaborate with electrical, software, controls, manufacturing, and quality teams to support smooth system integration. * Help identify design issues, propose solutions, and support continuous improvement efforts. * Communicate technical information clearly to teammates and contribute to a collaborative, learning-focused environment. * Participate in prototyping, building, testing, and iterating on mechanical designs. * Produce accurate drawings per ANSI Y14.5 with GD&T and support the creation and maintenance of BOMs and ECOs in PLM systems. * Travel up to 20%. What you'll need * Bachelor's degree or higher in Mechanical Engineering. * Minimum of 5 years of relevant industry experience. * Strong foundation in mechanical design principles and hands-on experience with electromechanical systems. * Solid experience in CAD software (SolidWorks preferred). Experience with FEA tools (SolidWorks Simulation or Ansys preferred). * Demonstrated ability to select and integrate components such as motors, sensors, and actuators. * Experience with a variety of manufacturing processes (machining, casting, sheet metal, plastics). * Excellent problem-solving, analytical, and critical thinking skills. * Strong communication and interpersonal skills. * Proven ability to work effectively as part of a team. * Passion for robotics, automation, and innovation. * Experience in industrial robotics, automation, or material handling (preferred). * Knowledge of PLM systems (preferred). * Experience with design for manufacturing and assembly (DFMA) (preferred). Our environment * Up to 20% travel may be required. Must possess a valid driver's license and be able to travel by air or car to customer or internal sites. * Employee must have a personal credit card for travel expenses and will be reimbursed on a bi-weekly basis. #LI-DW #LI-Onsite) About Symbotic Symbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world's largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visit ***************** We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work - for you and the world. That's why we're proud to be an equal opportunity employer. We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information. The base range for this position in the posted location is $101,000.00 - $138,600.00 however, base pay offered may vary depending on job-related knowledge, skills, and experience. The compensation package includes medical, dental, vision, disability, 401K, PTO and/or other benefits.

:** Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. **Job Posting External** **Job Responsibilities:** Assisting a Fulltime Mechanical Engineer to provide mechanical engineering expertise in the area of mechanical design, hydraulics, drivetrains, motors, simulation analysis, or engineering testing procedures. Assist in the design and development of innovative forklifts and material handling equipment focusing on one of the following: + **Mechanical Design -** Create layouts of proposed design ensuring that designs are functional, safe, reliable, serviceable, manufacturable, cost effective and esthetically and ergonomically correct. Select appropriate materials, organize bill of materials data and approve detail drawings. + **Hydraulics -** Propose hydraulic systems to satisfy vehicle performance and reliability goals. Develop specifications to meet goals, design systems, and specify components. Oversee design activities necessary to develop, prototype, and launch an approved system and components. + **Drivetrains -** Introduce alternate drive train concepts to meet definitions or specifications. Perform appropriate analysis of proposed gear drive, including gears, bearings, shafts, and housings for the variety of operating conditions expected to be encountered. + **Motors -** Research new motor designs, materials, and components. Research manufacturing processes. Provide cost estimates for projects. Write design documentation. + **Simulation Analysis -** Perform structural or stability analysis of proposed or existing product, structure, or component designs to ensure that design goals are met. Analyze failed structures or components to determine probable causes of failure. Perform basic load and stress calculations and perform analysis using finite element analysis and fatigue life prediction tools. + **Testing Procedures -** Identify the commonly-used concepts, methods, and procedures for the detailed development and analysis of experimental and standardized tests for new and modified products or components. Devise and apply validation procedures for components and systems under development. Evaluate new components and technologies. **Job Qualifications:** + Candidate should be pursuing a Bachelors degree, preferably in Mechanical Engineering + Good written communication, verbal communication, analytical, and interpersonal skills + Candidate must have reliable means of transporation **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. EOE Veterans/Disabilities

Job Title: Manufacturing Engineering Trainee Location: Simpsonville, SC; Greenville, SC; Belton, SC; Rogersville, TN; Asheville, NC; Marion, NC; Kansas City, MO Reports to: Engineering Manager Employment Type: Full Time Industry: Manufacturing | Mechanical Power Transmission Components | Engineering Services Job Function: Engineering | Process Improvement Job Summary: The Manufacturing Engineering Trainee (MET) is an entry-level manufacturing engineering position tailored for high-potential future leaders of Dodge Industrial. This program will follow a formal and structured rotational training and development program for 1-2 years. This role will include: Assigned daily mentorship from a technical and non-technical senior leader. Pre-assigned critical hands-on manufacturing projects that aim to eliminate cost and time and improve safety, quality, and on-time delivery. Tremendous exposure to all levels of Dodge leadership. Rotational opportunity for all Dodge manufacturing facilities and the North American Headquarters. In-depth training from all facets of the business (i.e., human resources, supply chain, finance, quality, etc.). Required Qualifications: Engineering degree (mechanical, industrial, or related field). Experience/working knowledge of manufacturing processes through internship, co-op, or full-time employment. Must be currently authorized to work for Dodge Industrial in the United States (US). Strong analytical skills with an emphasis on critical thinking, root cause analysis, and problem-solving. Attention to detail with a strong sense of ownership and responsibility. Excellent written and verbal communication skills. Collaborates well with others and is a good team player. Preferred Qualifications: Ability to read and decipher manufacturing drawings and procedures. Has worked in a metal-cutting work environment. Working knowledge of CNC equipment and programming. Gearing or bearing experience is a plus. Intermediate materials knowledge. Comfortable with and has the desire to work on a manufacturing shop floor. Why Join Us? Work alongside a collaborative, experienced leadership team. Be part of an industry leader with a strong brand reputation and an innovation-driven culture. RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Are you passionate about innovation? Are you excited at the opportunity to electrify and decarbonize the world? We operate with a founder's mindset. We deliver innovation with passion, speed, and courage. We continuously challenge our thinking and are empowered to dream big and take smart risks. **Job Description** **What impact you'll make** The need for clean energy is greater than ever. At GE Vernova Nuclear we are helping address climate change by designing technology to power our future with reliable, affordable, carbon-free energy. We are a world leader in advanced reactor technology, fuel and services. Join us as we build our legacy, boldly innovating to provide carbon-free power to the world. We are a diverse and dedicated global team who believes in the value of your unique identity, background, and experiences. We are committed to fostering an inclusive culture, where everyone feels empowered to do their best work because they feel accepted, respected, and that they belong. By embracing diverse teams and perspectives, we are better equipped to build a world that works. If you have a passion for technology and want a career in engineering, an internship with GE Vernova Nuclear will prepare you for an exciting career, tackling one of the world's toughest challenges of providing carbon-free power to the world. Various opportunities exist that include assignments designing, developing, improving, analyzing, and exposure to engineering concepts in hands-on, real-world situations. **What you'll do** + Receive technical learning opportunities, mentorship, and coaching from world-class technologists and experienced technical managers. + Grow your technical expertise in your chosen field and expand your skills in new areas. + Experience technically challenging assignments in the power generation industry focusing on areas such as of Systems, Analysis, Design, Reliability, Digital, and Integration & Test. + Perform design and analysis of product lines, develop models, solve problems, conduct research, and collaborate with the team and other organizations. **What you'll bring (Basic Qualifications)** + Must be enrolled in a full-time undergraduate or graduate program in an engineering discipline as listed below. + Following majors accepted: Chemical Engineering, Electrical Engineering, Material Science Engineering, Mechanical Engineering, Controls Engineering, Civil/Structural Engineering, Nuclear Engineering, Computer Science Engineering. + Must maintain a minimum 3.0 cumulative GPA (without rounding). + Must have the ability to work in the United States for an unlimited amount of time without sponsorship . **What will make you stand out** + Demonstrated initiative + Demonstrated desire to advance nuclear power generation + Strong written and verbal communications skills + Strong problem-solving abilities + Strong interpersonal skills + Bachelor's or Master's degree-seeking graduation years: Dec 2026, May or Dec 2027, May or Dec 2028. **Other Eligibility Requirements** + Must be 18 years of age or older. + Must have reliable transportation. + Must be willing to work in Wilmington, NC. + This position requires access to and/or use of information subject to control under the United States Department of Energy's Part 810 Regulations (10 CFR Part 810) and the Export Administration Regulations (15 CFR Parts 730 through 774) (collectively, "U.S. Export Control Laws"). Therefore, the applicant must be able to be authorized to access and/or use such information under U.S. Export Control Laws." **Benefits Available to you:** Addressing the climate crisis is an urgent global priority, and at GE Vernova, we take our responsibility seriously. That is the singular mission of GE Vernova: to continue electrifying the world while simultaneously working to help decarbonize it. In order to meet this mission, we provide varied, competitive benefits to help support our workforce. The pay for this position ranges from $21.00/hr - $34.00/hr based on years of undergraduate/graduate field of study completed This position is also eligible for: + **Relocation Assistance:** Co-op/Interns will be reimbursed for reasonable, proper, and documented expenditures incurred while initially reporting to work and returning to school/home upon completion of the assignment. Employees with a permanent address greater than 50 miles away from the work location are eligible. + **Housing Allowance:** Co-op/Interns employees receive a weekly housing allowance to help off-set living expenses when the co-op/Intern's permanent residence is at least 50 miles away from the work location. + **Employee Assistance Program,** providing 24/7 confidential assessment, counseling and referral services + **GE Retirement Savings Plan (RSP** ) after their accumulated service reaches 90 days, and they meet any other eligibility requirements as defined in the plans. (Eligibility occurs on the 1st of the month following the 90th day.) **Inclusion** At GE Vernova, we believe in the value of your unique identity, background and experiences. We are committed to fostering an **inclusive** **culture** , where everyone feels empowered to do their best work because they feel accepted, respected and that they belong. Click here to learn more: Our Culture | GE Vernova (**************************************************** **This posting will be open until at least July 18, 2025** _General Electric Company,_ _Ropcor_ _, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual._ _This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No For candidates applying to a U.S. based position only: This posting is expected to remain open for at least seven days after it was posted on December 01, 2025. U.S. Internship roles are ineligible for GE Vernova benefits. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description Job Title: Manufacturing Engineering Trainee Location: Simpsonville, SC; Greenville, SC; Belton, SC; Rogersville, TN; Asheville, NC; Marion, NC; Kansas City, MO Reports to: Engineering Manager Employment Type: Full Time Industry: Manufacturing | Mechanical Power Transmission Components | Engineering Services Job Function: Engineering | Process Improvement Job Summary: The Manufacturing Engineering Trainee (MET) is an entry-level manufacturing engineering position tailored for high-potential future leaders of Dodge Industrial. This program will follow a formal and structured rotational training and development program for 1-2 years. This role will include: Assigned daily mentorship from a technical and non-technical senior leader. Pre-assigned critical hands-on manufacturing projects that aim to eliminate cost and time and improve safety, quality, and on-time delivery. Tremendous exposure to all levels of Dodge leadership. Rotational opportunity for all Dodge manufacturing facilities and the North American Headquarters. In-depth training from all facets of the business (i.e., human resources, supply chain, finance, quality, etc.). Required Qualifications: Engineering degree (mechanical, industrial, or related field). Experience/working knowledge of manufacturing processes through internship, co-op, or full-time employment. Must be currently authorized to work for Dodge Industrial in the United States (US). Strong analytical skills with an emphasis on critical thinking, root cause analysis, and problem-solving. Attention to detail with a strong sense of ownership and responsibility. Excellent written and verbal communication skills. Collaborates well with others and is a good team player. Preferred Qualifications: Ability to read and decipher manufacturing drawings and procedures. Has worked in a metal-cutting work environment. Working knowledge of CNC equipment and programming. Gearing or bearing experience is a plus. Intermediate materials knowledge. Comfortable with and has the desire to work on a manufacturing shop floor. Why Join Us? Work alongside a collaborative, experienced leadership team. Be part of an industry leader with a strong brand reputation and an innovation-driven culture. RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Victaulic Summer Internship Program Description: The Summer Internship program is a three month exploration that provides a well-rounded, real-world look into what it means to work at Victaulic and in your field of interest. While the majority of the internships are held at our corporate headquarters in Easton, PA, we do occasionally support interns at other PA locations (Alburtis, Nazareth, and Allentown). Our interns spend their time gaining experience and working directly with their supervisor and team members. Interns should expect to take on ownership of robust projects that have an immediate and significant impact on their department and Victaulic business. As a Victaulic intern, you will be regarded as a great resource to our summer productivity. We seek to strike a balance between mentoring our interns, teaching them new skills, while providing them with a challenging workload and interesting projects. Through networking events, a buddy program, social activities, competitive compensation and more we hope to provide a rich experience that fosters development on a number of personal and professional levels. You will work with your recruiter to determine the perfect fit at Victaulic based on your career interests, major, and our departments' needs. Qualifications: * Major: Pursuing an undergraduate degree in engineering or an engineering related field relevant to the department of interest. * Class year: Must be at minimum rising into Junior year in college * Strong verbal and written communication skills * Interest in and ability to contribute to a team environment Majors & Departments: * Computer Engineering/Software Engineering * Virtual Design & Construction Dept - Create 3D virtual models of piping installations for testing purposes * Fire Protection Dept - Product development and testing related to fire suppression systems * Tools Technology Department - Develop hand and machine tools for cutting and roll forming of pipe. * Electrical Engineering * Tools Technology Department - Develop power electronics and embedded controls for machine tools * Chemical Engineering/Materials Science * Materials Technology Dept - Research and test chemicals/materials used in gasket production * Insulation Technology Dept - Product development of insulation methods used in piping installations * Global Process Technology Dept - Utilize electron microscopy techniques for metallurgical laboratory testing of different samples. * Fire Protection Engineering * Fire Protection Dept - Product development and testing related to fire suppression systems * Vortex Dept - Product assembly and operations related to fire suppression systems * Mechanical Engineering * Transformation & Operational Excellence (T&OE) - Focus on Lean Manufacturing initiatives, process improvement, and Kanban. * Insulation Technology Dept - Product development of insulation methods used in piping installations * Fluid Control Technology Dept - Control output of fluid in piping systems with use of company products * Fire Protection Dept - Product development and testing related to fire suppression systems * Sustaining Engineering Dept - Performance enhancements for existing products to increase efficiency * Fabrication Dept - Design and provide pre-assembled piping installation systems to solve customer issues * Application Engineering Dept - Customer support and root cause analysis for product issues * Engineering Lab Dept - Product testing in the Research & Development Lab * Manufacturing Dept - Improve processes and LEAN initiatives to increase production * Foundry Dept - Fixture design, robot programming, and scrap reduction * Tools Technology Department - Develop hand and machine tools for cutting and roll forming of pipe. * Industrial Engineering/Automation * Manufacturing Dept - Improve processes and LEAN initiatives to increase production * Foundry Dept - Fixture design, robot programming, and scrap reduction * Tools Technology Department - Develop automated systems using PLCs, VFDs, and vision systems. * Mechanical Design Engineering * Piping System Design Dept - Design products to accommodate movement in piping systems * Tools Technology Dept - Design and build prototypes of machine tools used in production * Engineering Design Dept - Creating and revising Solidworks models and drawings Equal Opportunity/Affirmative Action Employer *****************

Job Description Summer Sales Engineer Intern The Hoffman Family of Companies Are you a self-motivated, entrepreneurial, and highly competitive individual looking to put both your technical and social skills to work? Look no further! The Hoffman Family of Companies, Inc. is seeking talented students to join our Summer Sales Engineer Internship Program. We're looking for someone who thrives in challenging environments, builds professional relationships, and is eager to make a lasting impact in the industry. Who We Are Since 1947, Hoffman & Hoffman, Inc. has been a trusted provider of commercial HVAC equipment and control systems across the Southeast. We pride ourselves on delivering innovative, high-quality solutions that improve indoor air quality, optimize building efficiency, and enhance comfort. As a 100% EMPLOYEE-OWNED company, our sales engineers work in an entrepreneurial environment, supplying customers with the resources they need to succeed. Internship locations include: Charlotte, Raleigh, Wilmington, Columbia, Charleston (SC), Roanoke, Virginia Beach, Knoxville, Chattanooga, Nashville, Atlanta, and much more! What You Will Do As a Summer Sales Engineer Intern, you will: Apply technical knowledge and sales strategy to maximize equipment sales exposure. Learn how to support projects Develop your presentation and communication skills through competitions and task challenges. Build lasting relationships with mentors, colleagues, and customers. Gain real-world industry insight while upholding Hoffman & Hoffman's Core Values. Why Choose the Hoffman Family of Companies? At Hoffman, we combine the resources of a large, growing company with the culture of a close-knit team. Employee Ownership (ESOP): You're not just an intern-you're learning from owners who bring their best every day. Culture of Candor: We value open and honest communication at all levels. Team-Oriented Environment: Celebrate wins, learn from challenges, and grow together. Autonomy & Agility: We keep a “small company feel” with the advantages of a large organization. Career Exposure: Many engineers spend their entire careers in sales engineering because of the unlimited challenges, opportunities, and earning potential. Education & Experience Requirements Currently pursuing a Bachelor's degree in engineering, business, or construction management from an accredited institution. Relevant internship, co-op, or project experience preferred. Involvement in student organizations or extracurriculars strongly preferred. Characteristics of a Successful Sales Engineer Self-motivated and driven. Competitive and financially motivated. Excellent interpersonal, communication, and presentation skills. Strong problem-solving and analytical abilities. Attention to detail for accuracy in project execution. Ability to make clear, decisive choices in challenging situations. What We Can Offer You Employee Stock Ownership Program (ESOP): Learn from a culture built on ownership and shared success. Professional Development: Training, mentorship, and exposure to real-world projects. Networking Opportunities: Build valuable relationships with industry leaders. Travel Opportunities: Gain experience across different markets and project sites. Comprehensive Benefits: Medical, dental, vision, HSA, disability coverage, and voluntary benefits for those who continue with us full-time. If you are ready to ignite your sales engineering career and become part of a dynamic team shaping the future of the HVAC industry, apply today! Join the Hoffman Family of Companies, Inc. and experience a fulfilling journey where every day presents a new opportunity. EOE / Disabled / Vets

Become Part of Our Team As an industry leader Balfour Beatty offers employees a comprehensive benefits package with competitive salaries and more including: * Medical, Dental, Vision and Life Insurance * Health Savings Account * 401(k) with company match * Flexible Spending Accounts (Dependent & Medical Reimbursement) * Vacation Time * Sick Time * Holidays * Paid Volunteer time * Tuition Assistance * Employee Referral Bonus Summary At Balfour Beatty, we are seeking motivated college students for our 2026 summer internship program! If you have a passion for what you do, a strong drive to achieve results, the ability to solve problems creatively, and a dedication to client service and relationship management, come join us. Essential Functions * Learn about managing the project budget by controlling expenditures, coordinating owner and subcontractor billings, identifying work not covered by subcontractor, and ensuring successful office support related to overall cost and schedule. * Learn about Safety and Quality Control programs and how to coordinate actions to address problems. * Learn about company procedures, the correspondence process and handling, etc. with the Office Manager in accordance with the Operations Manual. * Learn how to review and process submittal data and shop drawings. * Understand how to coordinate submittals, deliveries, etc. that affect the project schedule with the Superintendent. * Monitor/review weekly and monthly status reports and weekly subcontractor meeting minutes, change orders, etc. to understand process. * Understand change documents and change proposal requests for price review. * May go with Project Engineer to meetings with architect and owner representatives to understand information required by owner, necessary progress reports and summaries, and how action plans from owner/architect meetings address all outstanding issues related to the project. * Learn how changes, clarifications, directives, RFIs, etc. are updated on "as-built" plans and coordinated with company supervision and subcontractors/suppliers. * Learn how to maintain RFI logs and change request log. Minimum Requirements * Currently enrolled in a Construction Management, Civil Engineering or Mechanical Engineering program. Preferred Requirements * Prior commercial construction internships or work experience, very helpful, but not required. * Able to develop new skills and knowledge quickly. * Participate in training, seminars, task team meetings, etc. * Demonstrate expanding knowledge of construction details about miscellaneous metals, casework, doors, specialties, radiation protection, etc. * Strong computer skills including the ability to use word processing, spreadsheets, etc. * Possess good self-organizational and management skills, and strong verbal and written communication skills. About us Balfour Beatty US is an industry-leading provider of general contracting, at-risk construction management and design-build services for public and private sector clients across the nation. Performing heavy civil and vertical construction, our teams build the unique structures and infrastructure that play an important role in how people live, work, learn and play in our communities. Our teammates have an instinctive passion for innovating that is fueled by a relentless curiosity, a drive to employ lean practices and processes and the determination to find a better way. Through Zero Harm, we are challenging the construction industry's assumptions about safety. We believe that no level of harm should come to anyone as a result of our business. Consistently ranked among the nation's largest building contractors by Engineering News-Record, our US business is a subsidiary of London-based Balfour Beatty plc (LSE: BBY). Balfour Beatty is an equal opportunity employer that recognizes the value of a diverse workforce. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state or local law. Accessibility: If you need an accommodation as part of the employment process, please contact Human Resources at: Phone: ************** Email:

Akkodis is seeking a Mechanical Design Engineer for a contract position with our client located in Durham, NC. Looking to kickstart your engineering career? We have an exciting contract opportunity for an entry-level Mechanical Design Engineer to join a dynamic team working on innovative solutions in the veterinary medicine device space. Salary Range: $30.00/hour to $36.00/hour. The salary may be negotiable based on experience, education, geographic location, and other factors. Manufacturing Engineer job responsibilities include: · Develop and revise complex 3D models, assemblies, and drawings. · Manage engineering changes and Bills of Materials in PLM systems. · Collaborate with cross-functional teams and adhere to industry standards (ASME, ANSI, IEC, IPC). Desired Qualifications: · AAS/AS/BS in Mechanical Engineering, Industrial Technology, or related field (or equivalent experience). · 0-4 years of engineering experience, ideally in automated machinery design. · Proficiency in SolidWorks or similar CAD tools. · Familiarity with fabrication techniques, GD&T, and PLM systems. If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at ************************** Equal Opportunity Employer/Veterans/Disabled Benefits offerings include but are not limited to : Medical Dental Vision To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

Job Title: Manufacturing Engineering Trainee Location: Simpsonville, SC; Greenville, SC; Belton, SC; Rogersville, TN; Asheville, NC; Marion, NC; Kansas City, MO Reports to: Engineering Manager Employment Type: Full Time Industry: Manufacturing | Mechanical Power Transmission Components | Engineering Services Job Function: Engineering | Process Improvement Job Summary: The Manufacturing Engineering Trainee (MET) is an entry-level manufacturing engineering position tailored for high-potential future leaders of Dodge Industrial. This program will follow a formal and structured rotational training and development program for 1-2 years. This role will include: Assigned daily mentorship from a technical and non-technical senior leader. Pre-assigned critical hands-on manufacturing projects that aim to eliminate cost and time and improve safety, quality, and on-time delivery. Tremendous exposure to all levels of Dodge leadership. Rotational opportunity for all Dodge manufacturing facilities and the North American Headquarters. In-depth training from all facets of the business (i.e., human resources, supply chain, finance, quality, etc.). Required Qualifications: Engineering degree (mechanical, industrial, or related field). Experience/working knowledge of manufacturing processes through internship, co-op, or full-time employment. Must be currently authorized to work for Dodge Industrial in the United States (US). Strong analytical skills with an emphasis on critical thinking, root cause analysis, and problem-solving. Attention to detail with a strong sense of ownership and responsibility. Excellent written and verbal communication skills. Collaborates well with others and is a good team player. Preferred Qualifications: Ability to read and decipher manufacturing drawings and procedures. Has worked in a metal-cutting work environment. Working knowledge of CNC equipment and programming. Gearing or bearing experience is a plus. Intermediate materials knowledge. Comfortable with and has the desire to work on a manufacturing shop floor. Why Join Us? Work alongside a collaborative, experienced leadership team. Be part of an industry leader with a strong brand reputation and an innovation-driven culture. RBC Bearings is an Equal Opportunity Employer, including disability and protected veteran status. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.