Numerical control operator jobs in Texas - 828 jobs

The following position is responsible for the grinding process in the manufacturing cycle. The work assigned is based upon the individual's training, experience, and ability. The roll grinder is expected to perform the requirements of the job per the Standard Operating Procedures and specific job Instructions recorded on the job router. The Supervisor may assign specific equipment or other tasks at the supervisor's discretion. Job Duties: Reading and interpreting production schedules, job router cards, blueprints, non-conformance reports, and any other materials that summarize requirements for the grinding of rubber rolls. Locating and retrieving rolls to the grinding production area utilizing overhead cranes and various materials handling equipment. Preparing the individual rolls for installation in the grinding equipment, utilizing knives to trim back rubber from the rollers prior to installing the rollers into the equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, cleaning steel surfaces of rollers using hand or mechanical equipment, such as die-grinders or sheet abrasive/polishing materials. Setting the grinding equipment, installing special grinding wheels or attachments, adjusting and setting tooling on tool posts, installing live-centers, chucks centers, extensions, dogs, etc. Aligning the rollers in the equipment to meet all dimensional requirements of job order. This includes adjustment for taper, TIR, roller surface finish, and finish dimensions. Measure all required dimensions and understand the relationship of the dimensions to the specific requirements of the job. Utilize all inspection and measurement equipment per procedure and instruction, including durometer gauges, pi-tapes, P&J gauges, micrometers, vernier diameter tapes, dial indicators, profilometers, temperature-indicating devices, and others as needed. Complete the grinding operation and inspect the finished product to ensure that all requirements are met. Complete all necessary paperwork, inspection reports, job router information, and operator sign-off on job. Clean all metal and rubber surfaces prior to protective wrapping. Unload the grinding equipment safely and without damage or harm to personnel, equipment or finished product. Deliver the finished product to a designated storage area or shipping container. Safely operate the grinding equipment to produce the desired results and meet the specific job requirement. Maintain a clean work environment, floors swept, supplies properly stored, equipment cleaned and well maintained. Other duties as assigned by supervisor. Qualifications: Language Skills Read, write, and understands English. Read mechanical blueprints and interpret technical documents. Write legible documentation conforming to prescribed style and format. Communicates effectively. Mathematical Skills Utilize all inspection and measurement equipment per procedure and instruction, including Durometer gauges, Micrometers, Vernier diameter tapes, Dial indicators, Profilometers, temperature-indicating devices, and others as needed. Understands/applies basic math, including accurate addition, subtraction, multiplication, and division. Other Skills Learn and utilize safe operating procedures. Strong reasoning ability. Physical Requirements: Stand, bend, and stooping for extended periods of time. Reaches by extending hand(s) or arm(s) in any direction. Ability to exert up to 50 pounds of force, and/or up to 25 pounds of force frequently. Required ability to use finger and hand dexterity to manipulate objects and lift 50 pounds. Vision ability within normal parameters. Hearing within normal range. Coordination to step over and maneuver around obstacles. Demonstrates safe operating habits. Education and Experience: High school diploma, GED, or high school equivalency #IND Maxcess is an equal employment opportunity employer. We do not discriminate on the basis of race, religion, sex, disability, age, pregnancy, national origin, sexual orientation, or any other characteristic protected by applicable law. We are committed to diversity and inclusion, and all qualified candidates are encouraged to apply.

: John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defense, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description: We are seeking an experienced CNC Programmer to help modernize and improve our machining operations. This role is ideal for someone who thrives on problem-solving and wants to take an active role in converting legacy machines from manual programming to modern CAD/CAM and conversational programming platforms. Develop and maintain offline N/C programs using CAD/CAM software for CNC turning and machining centers. Analyze existing manual or outdated programming methods and transition machines to conversational or feature-based programming. Work with Hexagon or similar software platforms for automated programming and feature recognition. Maintain and update manufacturing databases and documentation related to standards, methods, tooling, and inspection. Interpret engineering drawings and specifications to determine manufacturing requirements. Collaborate with machinists and engineers to troubleshoot and resolve issues related to programming, tooling, and machining processes. Validate and verify CNC programs for accuracy prior to release to the shop floor. Specify machining data, tooling requirements, and work holding strategies. Participate in Lean Manufacturing initiatives and continuous improvement projects. Maintain organized records for all CNC programs and associated documentation. Qualifications: 3-6 years on-the-job experience in the Manufacturing or Industrial Engineering field. Proficiency in CAD/CAM systems (Mastercam, FeatureCAM, GibbsCAM etc.). Experience with conversational programming and upgrading legacy machines. Experience creating offline CNC programs compatible with Fanuc, Siemens, and Haas controllers, including post-processing for different machine platforms. Familiarity with Hexagon software or similar automated programming platforms. Strong understanding of machining processes, tool paths, and G-code. Ability to work independently while collaborating with cross-functional teams. Additional Information: With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Qualification Requirements: Physical Requirements: Good hearing and able to communicate effectively. Able to work comfortably in dangerous work environments. Requirements: Must be at least 18 years of age. Able to identify shop safety hazards. Strong knowledge of safety requirements. Attention to detail. Knowledge of metals and their properties. Ability to produce high quality work. Able to understand spoken and written English effectively. Able to pass post offer substance testing. Essential Functions: Uses a variety of tools to measure, calculate, cut and modify materials. Processes skills and knowledge to safely operate machine shop tools and equipment. Follows established manufacturing methods using standard machine tools, materials and equipment. Adjusts feeds, speed, and depth of cut to machine quality. Reads diagrams and blueprints and manufactures metal parts to precise specifications. Set up tools such as milling machines, grinders, lathes and drilling machines. Correctly use precision measuring tools. Routinely maintains equipment to ensure cleanliness, accuracy and reliability. Physical Demands: Physically demanding job which requires lifting heavy objects, twisting, bending and reaching. Must be physically agile and able to work in confined spaces as well as high elevations. Work Environment: Exposure to varying extreme climates and outside weather conditions (heat/cold, wet/humid). BE SURE TO APPLY ON OUR WEBSITE: ****************

Machinists ensure the continued operation of equipment by performing preventive maintenance and/ or breakdown repairs on machinery, rotating equipment, and mechanical systems. These tasks are completed following diagrams, sketches, operations manuals, manufacturer's instructions, engineering specifications, journeyman troubleshooting protocols, and following procedures. Locates source of problems by observing mechanical devices in operation, listening for problems, using precision measuring and testing instruments, and utilization of equipment history failure knowledge. What will be expected from you? Removes defective parts by dismantling devices using maintenance tools hoists, cranes, hand and power tools, ladders, lifts, etc. Examines form and texture of parts to changes in the dimensional requirements of parts, inspecting and using measurement devices such as rulers, calipers, micrometers, and others. Replaces parts or rebuilds systems as necessary to maintain cost effectiveness of equipment and prevent mechanical failure. Maintains mechanical knowledge by documenting and communicating actions, irregularities, and continuing needs. Maintains equipment, parts, and supplies inventories by checking stock to determine inventory levels, and anticipating parts and equipment needs and communicating these needs. Team to identify process problem areas and learning how to communicate them up and through the organization using appropriate means of communication. Gain hands on experience using and implementing SAP records for tracking and managing maintenance daily activities. Participate in job hand-offs to fellow associates and conduct key operator communications to help properly diagnose malfunctions and to communicate progress of repairs. Maintains technical knowledge by attending educational workshops, reviewing technical publications, and completed all site required computer-based training. Participates in audits, investigations, HAZOPs, PHA's and quality efforts in the areas as needed. Maintains good housekeeping of equipment, parts storage, and shop work areas. Controls downtime by alerting production employees of routine preventive maintenance techniques, how to avoid equipment stresses via operational adjustments. Ensure that the activities are carried out to comply with the integrated management system, as applicable (safety, food safety, GMP, health, environmental, quality and responsible care requirements). Essential functions require presence in the workplace on a regular basis and an ability to work extra hours if needed. If applicable, ability to work overtime may be needed to ensure required staffing capacity to meet daily production objectives. Work collaboratively with team members with different backgrounds and perspectives. Assists other employees in accomplishments of Indorama company goals. Follows instructions and performs other duties as may be assigned by supervisor. Participates in Environmental, Health, & Safety initiatives as set forth by the company. Participates in and completes company required training programs. What are we looking for in the Ideal Candidate? Minimum of 10 years of experience working with rotating equipment and related machinery as a journeyman machinist/millwright required, education or apprenticeship may possibly be substituted for some years of experience. Machine shop equipment experience including manual lathe, balance machine, milling machine, drill press, and surface grinders. Possession of a Millwright, Industrial Millwright or Machinist NCCER certificate or comparable technical certificate is a plus. NOTE: Having any of these certificates can count towards some years of experience. Must possess or be eligible to obtain a Transportation Worker Identification Credential (TWIC). Must have a level of proficiency with SAP, Internet, Email and Microsoft Office programs. Demonstrate a satisfactory level of technical and professional skills/knowledge in the millwright discipline. Demonstrate knowledge and experience with all commonly used concepts, practices, and procedures within the millwright field. Knowledge of Reverse, Rim/Face, and Laser Alignment Methods Must be able to climb ladders and stairs. Must be able to work at elevated heights and work in confined spaces.

Job Posting Start Date 12-10-2025 Job Posting End Date 03-23-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a CNC Machinist located in Austin, TX. 1st Shift: 4X10 6:00am - 4:30pm Tuesday-Friday Job Description: · Setup and operate various conventional machine shop equipment such as lathes, mills, grinders, vertical and horizontal saws to produce and detail a variety of small parts, ranging from simple to complex, which are within prescribed tolerances and hold to finishes specifications. · Must be able to setup and operates Computer Numerical Control (CNC) Mazak vertical mills with Mazatrol. · Work with priority listings to complete fixtures/parts as required for production floor. · Accurately read 3 dimensional drawings and blueprints and be able to setup manual machines to within tolerance specified to produce products/fixtures. · Performs machine set-ups, adjusting speeds, feeds, and depth of cut, to machined parts to specifications set forth in blueprints, drawings, engineering orders, etc. · Checks machined parts for conformance to prescribed tolerances . · Make edits to CNC programming at machine controls if needed. · Must understand GD&T Must be able to use measurement equipment Here are a few of our preferred experiences: · Manufacturing previous experience · Flexflow What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryOperations Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

Job DescriptionRIVR is a Swiss robotics company pioneering Physical AI and robotic solutions to revolutionize last-mile delivery, giving 1 human the power of 1000. Through the combination of artificial neural networks and innovative robot designs with wheels and legs, RIVR aims to enhance efficiency, sustainability, and scalability in last-mile delivery. Founded as Swiss-Mile, the company rebranded to RIVR in 2025 to better reflect its mission of driving the future of intelligent robotics. As a Field Robot Operator, you will be responsible for driving a van and deploying our robot fleet in Austin, TX. You will work closely with remote operations teams to ensure the robot is deployed safely from our vans and successfully and efficiently carries our deliveries in accordance with our target volumes. Shifts last four to eight hours and may also be in early mornings and late evenings. For individuals that are eager to get full exposure to robot operations or seek more variety in daily tasks, it is also possible to combine the Field Robot Operator and Remote Robot Supervisor role.What you'll be doing Field Operating: Driving the van to delivery points, ensuring safe and efficient deployment of robots to and from the van and supporting the robot on its delivery drives, with a focus on meeting our delivery volume targets. Intervention and Safety: Perform the critical safety responsibility of intervening and controlling the robot in the unlikely event that the autonomy or remote supervision fails. In addition, safely driving the van vehicles and adhering to traffic laws and regulations at all times. Public Interactions: The Field Operator role is very much the "human face" of RIVR as it is likely to be the most common way that members of the public will interact with our robots. Therefore professionally handling different situations and interactions with members of the public in live operations is a key responsibility of the role. Data & Feedback: As we are building and scaling operations in Austin, a requirement of this role is to collect data and feedback from the field and communicate this to various internal teams with the view to improve operational efficiency, safety and value for our partners. Varia: Assisting with the onsite team to build and scale the Austin operations by helping out with hub-based tasks and offering support when needed to technical and remote operations teams when required. What you must have Education: High school diploma or equivalent. Language: Knowledge of basic English. Normal US Driving License (Class D) Get some bonus points Language: Knowledge of basic Spanish. Flexibility for shifts or extended hours during critical operations. Prior experience with operation of machines or equivalent. Due to visa sponsorship limitations, we can only consider candidates who are legally authorized to work in the U.S. at the time of application. RIVR is committed to building a diverse and inclusive team that values every perspective. If you're passionate about driving innovation in robotics and creating meaningful impact, we encourage you to apply and bring your unique self to our team. We believe the best work is done when collaborating and therefore require in-person presence in our office locations.

Job DescriptionDescription: The Robot Operator is responsible for setting up and operating robotic welding equipment according to established procedures. This role requires interpreting blueprints and drawings, adjusting robot settings to specifications, and ensuring accurate, quality production. Essential Responsibilities: Review work orders and shop drawings to confirm dimensions and material availability Set up workstations, fixtures, and robotic welding equipment Perform dry runs on initial pieces to verify accuracy Operate the robotic welding system to complete production jobs Inspect completed work and sign off on operations Requirements: Knowledge, Skills & Abilities Ability to read and interpret shop drawings Basic math skills and experience using measuring tools Familiarity with robotic welding equipment Strong focus on quality and productivity Ability to organize, prioritize, and manage multiple tasks Effective verbal and written communication skills Ability to stand for extended periods Ability to lift, push, and pull up to 25lbs unassisted Work Environment Typical machine shop environment Willingness to work additional hours as needed Willingness to be cross trained on multiple machines Minimum Qualifications High school diploma or GED Experience in a shop environment with robotic and plasma cutting equipment Familiarity with robot control panels; forklift and overhead crane experience preferred -------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job - you gain access to a range of benefits designed to promote your well-being, growth, and financial security. Health, dental and vision insurance 401K with company match Life Insurance Flexible Spending Accounts Generous annual time off policy 12 Company-Paid holidays A Solid Wellness Program to support your personal health goals Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company - APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Location: Accuseal Houston, TXShift Days/Hours: 1st shift Monday - Friday 6:00 am - 2:30 pm. /OBJECTIVE: To Prep billets on a lathe for the CNC department. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the Essential functions. Set up a machine to Prep the billets on the face, and groove, turn down O.D and I.D. Control inventory. Inspect goods. Implement and practice Lean Manufacturing tools including 5S, to increase productivity, and eliminate waste. Assist in cross-training. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by the lead or supervisor. Other Requirements Must be able to learn basic computer skills. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to work in an environment with various temperatures. Required Education and Experience: High school diploma or equivalent. Must have 6 months to 1 year of work-related experience or be qualified by certification. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 50 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit, and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand.

Full-time Description The Computer Numerical Control (CNC) Machinist, located in a climate-controlled facility in Orange, TX, is committed to supporting Cloeren Incorporated continue to be the leader in extrusion die and feedblock quality and technology by operating CNC machines in a safe and productive manner, skilled precision and bench work in the fabrication, maintenance, repair and alteration of machinery, machine parts, tools, and equipment. Primary Duties & Responsibilities Read and interpret blueprints. Use gauge and measuring instruments to meet tolerance requirements. Use precision tools, machinery, and equipment such as lathe, vertical milling machine, drill press, hydraulic press, chop saw, band saw, push and pull broaches and a variety of cutting tools and equipment. Fabricates and shapes parts such as tools and machine parts out of metal, plastics, and composites. Properly and safely selects, aligns, secures, and removes holding fixtures, cutting tools, attachments, accessories, and materials onto machines. Recognizes, deploys, and properly uses inserts, fixtures, and tooling. Performs daily and regular cleaning and light maintenance tasks on machinery and equipment. Ability to track parts and jobs in ERP system. Complies with all quality policies, specifications, regulations, and instructions. Operate the overhead cranes and forklift effectively and safely. Performing all other duties and responsibilities as assigned. Requirements At a minimum, the CNC Machinist must have a high school diploma, or equivalent, along with 2-3 years of proven experience as a Class 1 Machinist or CNC Operator and proven ability to read prints. Associates degree in machining or related field of study, or trade school graduate along with prior Class 1 Machinist or CNC Operator is highly preferred. Knowledge, Abilities, & Skills for Success Effectively communicate in a positive and professional manner through written and verbal communications in all interfaces with customers/public, fellow employees, vendors, etc. Ability to use appropriate computer programs (including, but not limited to, Microsoft Office Suite) which includes having proficient computer skills and the ability to adapt and learn as programs and processes change. Ability to work as a team member and exert initiative to work independently to reach a goal. Ability to embrace change in the workplace while encouraging others to seek innovative approaches. Ability to function effectively as a team player. Ability to work a flexible work schedule, including overtime, as needed, to best serve our business operations. Cloeren Benefits Medical, Dental, Vision, Voluntary Life Insurance, and Medical Flexible Spending Account (FSA), 401k benefits, including company match, Competitive wages, Paid vacation and holidays, and Company paid Basic Life/AD&D Insurance and Short/Long-Term Disability About Cloeren Incorporated Cloeren Incorporated, headquartered in Orange, Texas, is the global leader in feedblock and die technology for extrusion applications. To find out more about our family-run business, visit our website at *************** . Cloeren Incorporated is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

We are creating devices that enable a bi-directional interface with the brain. These devices allow us to restore movement to the paralyzed, restore sight to the blind, and revolutionize how humans interact with their digital world. Team Description: The Machine Shop is a vital component of Neuralink's mission to develop the world's best and most manufacturable Brain-Computer Interface (BCI). Our team of skilled Machinists play a crucial role in accelerating engineering innovation by producing high-precision robot parts, surgical components, executing small batch runs for the Brain Interfaces team, and providing design and fabrication support for Animal Care teams. As a small, collaborative group, we operate with a sense of urgency and prioritize maintaining an excellent work culture. Job Description and Responsibilities: Note: Second shift schedule will be approximately 2:30 pm to 1:00 am (Central Time), Monday through Thursday. As a CNC Machinist, you will play a key role in the end-to-end manufacturing process, from programming and setting up CNC machines to ensuring the quality of finished parts through meticulous inspection. This position offers the opportunity to work on diverse projects, solve complex machining challenges, and directly impact the company's mission. Moreover, you will be expected to: Create and modify programs for various machining tasks, troubleshoot and resolve programming or operational issues, and optimize machining processes to improve efficiency and minimize waste Set up CNC machines (e.g., Lathes, Mills, etc.), load raw materials, ensure proper setup and programming, and perform full end-to-end manufacturing processes Measure and inspect finished parts using precision tools (e.g., calipers, micrometers, coordinate measuring machines), comparing them to blueprints and engineering specifications to maintain high levels of precision and quality throughout production Perform routine maintenance on CNC equipment to ensure optimal performance, identify and address potential issues before they cause machine downtime, and maintain a clean and organized workspace Manage parts in your queue, including material purchasing and proper tooling selection Required Qualifications: 5 years of relevant machine shop experience Experience with at least one CAM software and one CNC control Ability to read and interpret engineering drawings Machine operator experience Preferred Qualifications: Ability to work during the following shift hours: Monday through Thursday, 2:30 pm to 1:00 am (Central Time) Expected Compensation: At Neuralink, your base pay is one part of your total compensation package. The anticipated hourly rate for this position is expected to be within the below range. Your actual base pay will be determined by your job-related skills, experience, and relevant education or training. Texas Hourly Range: $50 - $66/Hr USD What We Offer: Full-time employees are eligible for the following benefits listed below. An opportunity to change the world and work with some of the smartest and most talented experts from different fields Growth potential; we rapidly advance team members who have an outsized impact Excellent medical, dental, and vision insurance through a PPO plan Paid holidays Commuter benefits Meals provided Equity (RSUs) *Temporary Employees & Interns excluded 401(k) plan *Interns initially excluded until they work 1,000 hours Parental leave *Temporary Employees & Interns excluded Flexible time off *Temporary Employees & Interns excluded

Brief Description: The CNC Machinist I is responsible for operating and maintaining CNC (Computer Numerical Control) machinery to produce precision components. This position ensures the highest quality standards in manufacturing by adhering to engineering specifications, safety protocols, and company procedures. The CNC Machinist I works under the direction of and will report to the Manufacturing Supervisor. Detailed Description: Operate CNC mills and CNC lathes machineries to produce parts and components to specification, ensuring quality and accuracy. Interpret blueprints, technical drawings, and work orders to understand product specifications and machining requirements. Set up and calibrate machinery, including selecting and installing appropriate tools, attachments, and materials. Load and verify CNC programs as required, ensuring that the correct program is selected for each job. Perform routine inspections and measurements of finished products using precision instruments such as calipers, micrometers, and gauges. Monitor machine performance during operation and make adjustments as necessary to maintain product quality and efficiency. Conduct preventive maintenance on CNC equipment to ensure optimal performance and minimize downtime. Identify and troubleshoot issues with machines, tools, or workpieces, resolving minor problems independently and escalating complex issues to supervisors. Maintain accurate production and inspection records, documenting any discrepancies or issues for reporting purposes. Collaborate with team members to identify opportunities for process improvement and implement solutions under guidance. Adhere to all safety protocols and wear appropriate personal protective equipment (PPE) to maintain a safe working environment. Job Requirements: Proficiency in operating and maintaining CNC mills and lathes. Ability to interpret and work from technical blueprints and schematics. Familiarity with measuring tools and quality assurance processes. Basic understanding of CNC programming principles. Strong attention to detail and manual dexterity to handle precision work. Effective communication and teamwork skills to collaborate with peers and supervisors. Ability to lift, push, and pull up to 50 lbs. and stand for extended periods. Basic computer knowledge. Basic math skills, including geometry and trigonometry, to calculate dimensions and tolerances. Minimum Qualifications: High School Diploma or GED. 2+ years of experience in CNC mill/lathe set-up and operation. Must pass a forklift operator test. Preferred Qualifications: Basic knowledge of CNC programming. Experience with G&M code editing. Completion of a formal CNC Machining Certification. Additional Details: The CNC Machinist I must work with an emphasis on safety for themselves and others including coworkers and third parties. The typical work environment will be in the shop or field which will require exposure to outdoor weather conditions, loud noise, working near moving mechanical parts, electrical energy, construction equipment, vibration, fumes, chemicals, and airborne particles.

* Read and interpret technical blueprints and set up CNC machines in accordance with designated blueprints. * Load raw materials onto CNC Machine and operate CNC Machine (Lathe/Mill). * Adjust machine settings or cutting paths, for desired material/design specifications, to optimize production whilst maintaining quality standards. * Correct/ improve program code to increase efficiency, quality, and safety. * Perform quality assurance tests, ensuring products meet design specifications. * Troubleshoot and resolve machining problems as they occur. * Input product design into computer modeling software. * Participate in continuous improvement initiatives. Qualificationsarrow_right * Minimum 5 years' experience as a CNC Machine Operator and Programmer * Able to use and understand 3D computer designs (CAD models) and technical blueprints. * Experience in using computer aided manufacturing (CAM) software programs to generate program codes. * Understanding and experience in delivery quality assurance tests, essential. * Able to maintain good housekeeping and perform safe working practices. * Good communication skills, written and verbal, with the ability to work with minimal supervision. * Must have intermediate shop mathematics skills. * Must be able to lift up to 35 Ibs. repetitively. The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law.

We are currently seeking a permanent, full-time Tool/Mold Maker for 3rd Shift (10pm-6am) at our Arlington, TX facility. Sets up and operates lathes, milling machines, electrical discharge machines, and surface and cylindrical grinders. Tool assembly/disassembly. Mold repair and maintenance including Red Tag work order processing. Instructs other toolmakers and apprentices in the operation and set up of tool room equipment. Welding Tig/MiG and micro-welding. Constructs injection molds from basic to high complexity. Completes engineering changes and revisions to injection molds. Repairs injection mold cavities and cores due to damage or wear. Builds fixtures and gages as needed. Performs Project Leader duties (as assigned) on a new mold or major revision and is responsible for the quality of the project. Would be assisted by an apprentice or another toolmaker who would help them with setups and machining methods. Observe all health and safety requirements and maintain the work area in a neat and orderly condition. Performs reasonably related duties as assigned. Education Requirements: High school diploma or general education degree (GED) Broad knowledge of molding and injection mold repair with the ability to diagnose and troubleshoot hydraulics, mechanical, and electrical problems. 5-10 years of mold-making, repair, and maintenance experience. Strong experience with stoning and polishing mold components. We want to talk to you if you have: Broad knowledge of molding and injection mold repair with the ability to diagnose and troubleshoot hydraulics, mechanical, and electrical problems. 5-10 years of mold-making, repair, and maintenance experience. Strong experience with stoning and polishing mold components. Physical Demands Must be able to stand on feet and/or sit 8-12 hours a day and lift to 40lbs on an occasional basis and 15 lbs regularly. Must be able to perform overhead work as well as work below the waist. IAC Perks: 401(k) Health, Dental and Vision Insurance Paid time off Company events Employee Assistance Program (EAP) Looking for a next-level career? Apply today!

Job Description CNC Machinist - Full-Time Position Immediate Openings - Competitive Pay + Benefits We are a growing precision machining shop actively looking for skilled and motivated CNC Machinists (Mill & Lathe) to join our team. What You'll Do Set up and operate CNC mills and/or lathes (Haas, Fanuc, Hurco, - experience with any of these is a plus) Read and interpret blueprints, GD&T, and work instructions Produce high-quality parts in low to medium volumes Perform in-process inspection using micrometers, calipers, bore gages, CMM, etc. Edit programs (G-code) and adjust offsets as needed Maintain a clean, safe, and organized work area What We're Looking For Minimum 3-5 years of hands-on CNC experience (setup + operation) Ability to work from blueprints and independently troubleshoot Strong attention to detail and commitment to quality Reliable attendance and a positive attitude Experience with live tooling 4-axis/5-axis is a plus but not required We Offer Competitive hourly pay based on experience Overtime available (time-and-a-half after 40 hrs) Health insurance contribution Paid holidays + vacation 401(k) with company match Clean, modern shop with lots of machines Day shift and night shift positions available Opportunity for advancement Location: Dallas, Texas - No relocation assistance. If you take pride in making chips fly and want to work with a solid team that values craftsmanship, we want to hear from you!

The CNC Horizontal Boring Mill Machinist (HBM) will perform a variety of finish machining practices involved with drilling, threading (tap & thread mill), boring, etc., while maintaining close tolerances on a wide variety of components from various industries. The ideal candidate needs to be fluent with Fanuc Controls (Tosnuc) including A+ experience with cogs dill contouring heads and the use of right-angle heads. The candidate must be able to read and interpret drawings, work instructions, read and understand programs, all to ensure compliance with specifications and quality requirements. Must have basic hand & measuring tools, indicators, etc. REQUIREMENTS AND QUALIFICATIONS Maintain a safe working environment and a commitment to safety excellence. Responsible for understanding and complying with the safety policy, procedures, and instructions. Maintaining a clean and organized work area Must be able to read and understand Blueprints and G-Code Other projects and responsibilities may be added at the company's discretion. Monitor machine while working to adjust the feed, maintain temperature and identify issues. KNOWLEDGE AND/OR SKILL REQUIREMENTS Ethical Conduct Exceptional problem-solving abilities and organizational skills Ability to be resourceful and proactive in dealing with issues that may arise. Able to read, write, understand, and speak English. Organizational: Exceptional attention to details. Display ownership and accountability for tasks and responsibilities. Exceptional ability to manage competing priorities. Interpersonal: Excellent interpersonal and customer service skills. Excellent verbal and written communication skills. Ability to work independently. Ability to work and interact professionally and respectfully with coworkers. Efficiency: Ability to manage other projects and responsibilities that may be added at the company's discretion. Exceptional ability to multitask, prioritize, and manage time and resources effectively. Excellent time management skills with a proven ability to meet deadlines. The above list of activities is not all inclusive but a general representation of the requirements of an RMS CNC Horizontal Boring Mill Machinist. This list is subject to change based on the needs of the company. Education: Highschool Diploma or GED from an accredited learning institution Previous Experience: 2 Years Previous experience preferred. OTHER INFORMATION The position will be based full time in our Tomball, TX facility. Evening and weekends depending on company needs. Position will have a 60-day probation period. At the end of the probation period, the machinist will be reviewed to determine competency of work performance and compliance with established company safety directives. Position will be compensated on an hourly basis, with bi-weekly pay periods. Able to understand, read, write and speak English proficiently in order to communicate with shop supervision and safety directives. Legal to work in the United States. Able to pass a pre-employment drug and alcohol test, physical performance evaluation and background check. Physical Requirements: While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift. Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. Must be able to use hands for assembly and tool usage. Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. Work Environment: While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER Competitive Pay Paid Time Off Medical / Dental / Vision 401k Employee Incentive Programs Employee Reimbursement Programs Come Join Rotating Machinery Services Inc. and watch your Career go TURBO! ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise-all backed by responsiveness in competitive prices and lead times. RMS' commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

RIVR is a Swiss robotics company pioneering Physical AI and robotic solutions to revolutionize last-mile delivery, giving 1 human the power of 1000. Through the combination of artificial neural networks and innovative robot designs with wheels and legs, RIVR aims to enhance efficiency, sustainability, and scalability in last-mile delivery. Founded as Swiss-Mile, the company rebranded to RIVR in 2025 to better reflect its mission of driving the future of intelligent robotics. As a Field Robot Operator, you will be responsible for driving a van and deploying our robot fleet in Austin, TX. You will work closely with remote operations teams to ensure the robot is deployed safely from our vans and successfully and efficiently carries our deliveries in accordance with our target volumes. Shifts last four to eight hours and may also be in early mornings and late evenings. For individuals that are eager to get full exposure to robot operations or seek more variety in daily tasks, it is also possible to combine the Field Robot Operator and Remote Robot Supervisor role.What you'll be doing Field Operating: Driving the van to delivery points, ensuring safe and efficient deployment of robots to and from the van and supporting the robot on its delivery drives, with a focus on meeting our delivery volume targets. Intervention and Safety: Perform the critical safety responsibility of intervening and controlling the robot in the unlikely event that the autonomy or remote supervision fails. In addition, safely driving the van vehicles and adhering to traffic laws and regulations at all times. Public Interactions: The Field Operator role is very much the "human face" of RIVR as it is likely to be the most common way that members of the public will interact with our robots. Therefore professionally handling different situations and interactions with members of the public in live operations is a key responsibility of the role. Data & Feedback: As we are building and scaling operations in Austin, a requirement of this role is to collect data and feedback from the field and communicate this to various internal teams with the view to improve operational efficiency, safety and value for our partners. Varia: Assisting with the onsite team to build and scale the Austin operations by helping out with hub-based tasks and offering support when needed to technical and remote operations teams when required. What you must have Education: High school diploma or equivalent. Language: Knowledge of basic English. Normal US Driving License (Class D) Get some bonus points Language: Knowledge of basic Spanish. Flexibility for shifts or extended hours during critical operations. Prior experience with operation of machines or equivalent. Due to visa sponsorship limitations, we can only consider candidates who are legally authorized to work in the U.S. at the time of application. RIVR is committed to building a diverse and inclusive team that values every perspective. If you're passionate about driving innovation in robotics and creating meaningful impact, we encourage you to apply and bring your unique self to our team. We believe the best work is done when collaborating and therefore require in-person presence in our office locations.

Shift Days/Hours: 1st shift Monday - Friday 6:00 am - 2:30 pm. /OBJECTIVE: To Prep billets on a lathe for the CNC department. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the Essential functions. Set up a machine to Prep the billets on the face, and groove, turn down O.D and I.D. Control inventory. Inspect goods. Implement and practice Lean Manufacturing tools including 5S, to increase productivity, and eliminate waste. Assist in cross-training. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by the lead or supervisor. Other Requirements Must be able to learn basic computer skills. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to work in an environment with various temperatures. Required Education and Experience: High school diploma or equivalent. Must have 6 months to 1 year of work-related experience or be qualified by certification. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 50 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit, and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand.