Operations engineer jobs in Brownsville, TX - 5,453 jobs

Currently, we are seeking a Building Engineer to join the Foundry Commercial team in Dallas, Texas. The Building Engineer is responsible for performing or directing the performance of all service maintenance requests for a specific property. This position will work Monday through Friday from 7:30am to 4:30pm. Essential Job Functions: Perform general preventative maintenance and corrective repair of buildings, systems, equipment and grounds. Assist in monitoring building system operations and performance. Perform plumbing, electrical, Electrical, HVAC repairs. Understand all applicable client goals and objectives as well as management agreement requirements, ensuring the team delivers those requirements. Perform all necessary mechanical maintenance and operational procedures to ensure maximum life and reliability to all mechanical systems. Responsible for general maintenance and operational duties, which include performance testing, maintenance, adjustment and care of the following: HVAC equipment including Chillers, Pumps, Fan Powered Box troubleshooting and repairs. HVAC control systems: knowledge of DDC (direct digital controls). Plumbing systems including Commercial. Electrical systems: Resetting breakers, testing circuits, troubleshooting electrical issues. Perform troubleshooting and maintenance of commercial kitchen equipment preferred. Lighting systems and lighting retrofits. General building systems. Knowledge of CMMS (Computerized Maintenance Management Software-IMPAK). Knowledge of sprinkler systems, dry systems, fire panels, and fire pumps. Assist in capital project planning. Education and Experience Requested: HS Diploma with minimum 5+ years of experience in commercial building maintenance and repair required. Knowledge of Building Automation Systems (BAS) and preventative maintenance. Ability to troubleshoot and repair a variety of building systems. HVAC technical training and EPA refrigeration licenses highly preferred. Foundry Commercial is an Equal Opportunity Employer Foundry Commercial is an equal opportunity employer and makes employment decisions on the basis of merit. We want to have the best available person in every job. It is the policy of Foundry Commercial to grant equal employment opportunities to all qualified persons without regard to race, color, creed, sex, religion, age, national origin, marital status, sexual orientation, citizenship, physical or mental disability that does not prohibit performance of essential job functions, veteran's status, or any other conditions or identifications against which discrimination is prohibited.

Upstart is the leading AI lending marketplace partnering with banks and credit unions to expand access to affordable credit. By leveraging Upstart's AI marketplace, Upstart-powered banks and credit unions can have higher approval rates and lower loss rates across races, ages, and genders, while delivering the digital-first lending experience their customers demand. More than 80% of borrowers are approved instantly, with zero documentation to upload. Upstart is a digital-first company, which means that most Upstarters live and work anywhere in the United States. However, we also have offices in San Mateo, California; Columbus, Ohio; and Austin, Texas. Most Upstarters join us because they connect with our mission of enabling access to effortless credit based on true risk. If you are energized by the impact you can make at Upstart, we'd love to hear from you! The Team Upstart's Machine Learning, Personal Loan Underwriting team is focused on leveraging machine learning to power Upstart's underwriting models. This team builds the underwriting model which determines credit decisioning at Upstart and plays a central role in overall performance with numerous challenging problems to solve. As a Machine Learning Engineer, PL UW at Upstart, you will collaborate with Research Scientists, Data Scientists, and other engineering departments. Your work will impact the team in a number of ways: Increase ML productivity through better software and infrastructure; improve how we research, train, deploy, serve and monitor our models. Reduce the time from idea to production and enable testing of new ideas to fulfill our mission of enabling access to credit more effectively. Design and implement code and algorithms to improve our model's predictive power. How you'll make an impact Build repeatable workflows and automation that allow scientists to focus on high-leverage tasks (methodology, writing, analysis) and reduce time spent on maintenance. Discover and develop a short and long-term roadmap of engineering improvements for the PL UW team. Explore new algorithms and methodologies for our machine learning models. Interface cross-functionally with other engineering teams to provide feedback and requirements for end-to-end high-quality systems. Qualifications Education and Experience Phd in a quantitative field with 0+ years of relevant experience Masters in a quantitative field with 2+ years of relevant experience Bachelors in a quantitative field with 4+ years of relevant experience Experience in Python Experience with Machine Learning Position location This role is available in the following locations: Remote Travel requirements As a digital first company, the majority of your work can be accomplished remotely. The majority of our employees can live and work anywhere in the U.S but are encouraged to spend high quality time in-person collaborating via regular onsite. The in-person sessions cadence varies depending on the team and role; most teams meet once or twice per quarter for 2-4 consecutive days at a time. What you\'ll love Competitive Compensation (base + bonus & equity) Comprehensive medical, dental, and vision coverage with Health Savings Account contributions from Upstart 401(k) with 100% company match up to $4,500 and immediate vesting Employee Stock Purchase Plan (ESPP) Life and disability insurance Generous holiday, vacation, sick and safety leave Supportive parental, family care, and military leave programs Annual wellness, technology & ergonomic reimbursement programs Social activities including team events and onsite sessions, ERGs, and interest groups Catered lunches + snacks & drinks when working in offices #LI-REMOTE #LI-Associate Compensation At Upstart, your base pay is one part of your total compensation package. The anticipated base salary for this position is expected to be within the below range. Your actual base pay will depend on your geographic location. Individual pay is also determined by job-related skills, experience, and relevant education or training. Your recruiter can share more about the specific salary range for your preferred location during the hiring process. In addition, Upstart provides employees with target bonuses, equity compensation, and generous benefits packages (including medical, dental, vision, and 401k). United States | Remote - Anticipated Base Salary Range $123,200-$170,500 USD Equal Opportunity Upstart is an Equal Opportunity Employer. We are dedicated to ensuring that underrepresented classes receive better access to affordable credit, and are committed to embracing diversity and inclusion in our hiring practices. We celebrate all cultures, backgrounds, perspectives, and experiences, and know that we can only become better together. Reasonable accommodations for applications, interviews, or pre-employment testing can be requested by emailing candidate_accommodations@upstart.com. ************************************************ #J-18808-Ljbffr

Occasional trave to Cranston, Rhode Island We are seeking a Mechanical Engineer with strong Design for Manufacturing (DFM) experience to join our team in Lubbock, TX. This role will support the Manufacturing Engineering team and collaborate closely with R&D staff to improve processes, design fixtures, and enhance product assembly tools. The ideal candidate is a hands-on, proactive individual contributor with a proven track record in manufacturing environments. --- Key Responsibilities · Provide design engineering support for manufacturing operations in Lubbock. · Collaborate with manufacturing engineers to improve fixtures, tools, and assembly processes. · Participate in process improvement initiatives and assist with administrative tasks related to design engineering. · Apply Design for Manufacturing principles to optimize product designs for efficient production. · Develop and refine fixture designs to support assembly operations. · Work onsite to ensure timely communication and effective collaboration with local teams. · Occasionally travel to Cranston, RI (quarterly) for meetings and training; initial 2-week visit to learn products and processes. · Engage with R&D staff to address design questions and support product development. --- Qualifications · Bachelor's degree in Mechanical Engineering or related field. · 10+ years of design support experience in a manufacturing environment. · Proficiency in CAD software (SolidWorks, Pro-E, Inventor). · Strong understanding of Design for Manufacturing principles. · Excellent communication and collaboration skills. · Ability to work independently and take initiative (go-getter attitude). · Willingness to travel occasionally. --- Value Proposition · Opportunity for a long-term role in a large manufacturing facility. · Exposure to world-class processes and equipment. · Gain deep knowledge of product design and functionality. · Work with a collaborative team in a dynamic environment.

Texarkana, TX $90,000 - $115,000 + 6% 401(k) match + Medical, Dental, Vision, Life Insurance, PTO, Bi-Annual Bonus Are you a Mechanical Engineer looking for a design role, where you will project manage things from concept through to completion? On offer is a fantastic opportunity to have a hands on role, in this well rounded Mechanical Engineering role. You will be trained in all areas of manufacturing and design. The company prides themselves on quality-built products and a strong customer focus. Due to continued expansion, they are looking to grow their engineering team. This role would suit a Mechanical Engineer looking for a varied role to be trained in all areas of design and manufacturing. The Role Take designs from concept through to production, ensuring they meet customer and manufacturing needs. Collaborate with welders, technicians, and engineers to bring projects to life, introducing best practices and process improvements. Be hands-on with the product - including learning welding, assembly, and manufacturing methods - to fully understand how designs translate to real-world builds. The Candidate Mechanical Engineer Looking for a hands on role Looking for training to become a specialist

Houston, TX The AV Design Engineer is responsible for designing, specifying, and documenting audio-visual systems that meet client needs and project requirements. This role works closely with sales, project managers, and installation teams to deliver high-quality, reliable AV solutions for corporate and industrial commercial environments. AV Design Engineer Responsibilities: Design complete AV systems including audio, video, control, and networking components. Prepare estimates based on floor plans and client meetings. Develop equipment lists, bills of materials ensure technical specifications make a complete system. Support sales and project teams with technical expertise. Conduct site surveys and meet with clients to do a needs analysis. AV Design Engineer Requirements: 3+ years of AV system design or integration experience. Strong knowledge of audio, video, control, and networking systems. Proficiency with AutoCAD, Visio, Bluebeam, or similar tools. Ability to read architectural and construction drawings. CTS Certification, CTS-D preferred AV Design Engineer Compensation: $80K - $100K salary Comprehensive benefits package 401(k)

As a Distinguished Engineer at Capital One, you will be a part of a community of technical experts working to define the future of banking in the cloud. You will work alongside our talented team of developers, machine learning experts, product managers and people leaders. Our Distinguished Engineers are leading experts in their domains, helping devise practical and reusable solutions to complex problems. You will drive innovation at multiple levels, helping optimize business outcomes while driving towards strong technology solutions. At Capital One, we believe diversity of thought strengthens our ability to influence, collaborate and provide the most innovative solutions across organizational boundaries. You will promote a culture of engineering excellence, and strike the right balance between lending expertise and providing an inclusive environment where the ideas of others can be heard and championed. You will lead the way in creating next-generation talent for Capital One Tech, mentoring internal talent and actively recruiting to keep building our community. Distinguished Engineers are expected to lead through technical contribution. You will operate as a trusted advisor for our key technologies, platforms and capability domains, creating clear and concise communications, code samples, blog posts and other material to share knowledge both inside and outside the organization. You will specialize in a particular subject area, but your input and impact will be sought and expected throughout the organization. The Distinguished Engineer will be a part of the Asset Management organization within the Cloud Operations Resilience Engineering (CORE) line of business. In this role, you will define, architect, and drive the implementation of best practices for Asset Management, Security, and Compliance while leading various complex technical initiatives to include shaping scalable solutions. Additionally, you will mentor and provide technical direction to engineering teams across the organization to drive Operational Excellence and propel our Asset Transformation journey. If you are ready to provide thought leadership and build engineering excellence across Capital One's engineering teams, come join us in our mission to change banking for good. Key responsibilities: Articulate and evangelize a bold technical vision for your domain Decompose complex problems into practical and operational solutions Ensure the quality of technical design and implementation Serve as an authoritative expert on non-functional system characteristics, such as performance, scalability and operability Continue learning and injecting advanced technical knowledge into our community Handle several projects simultaneously, balancing your time to maximize impact Act as a role model and mentor within the tech community, helping to coach and strengthen the technical expertise and know-how of our engineering and product community Basic Qualifications: Bachelor's Degree At least 7 years software engineering or software development experience At least 5 years of public cloud experience (AWS, GCP, Azure) Preferred Qualifications: Masters' Degree 12+ years of software engineering or software development experience 7+ years of experience in building distributed systems & highly available services using cloud computing services (AWS, GCP, Azure) 5+ years of experience in ServiceNow Platform 5+ years of experience in IT Asset Management, Service Management, Risk Management domains 2+ years of experience in Domain Driven Design and Event Driven Architecture Experience in defining and deploying future-state ITSM/ITAM processes and identifying solutions from a people, process and technology perspective Capital One will consider sponsoring a new qualified applicant for employment authorization for this position. The minimum and maximum full-time annual salaries for this role are listed below, by location. Please note that this salary information is solely for candidates hired to perform work within one of these locations, and refers to the amount Capital One is willing to pay at the time of this posting. Salaries for part-time roles will be prorated based upon the agreed upon number of hours to be regularly worked. McLean, VA: $269,100 - $307,200 for Distinguished EngineerPlano, TX: $244,700 - $279,200 for Distinguished EngineerRichmond, VA: $244,700 - $279,200 for Distinguished Engineer Candidates hired to work in other locations will be subject to the pay range associated with that location, and the actual annualized salary amount offered to any candidate at the time of hire will be reflected solely in the candidate's offer letter. This role is also eligible to earn performance based incentive compensation, which may include cash bonus(es) and/or long term incentives (LTI). Incentives could be discretionary or non discretionary depending on the plan. Capital One offers a comprehensive, competitive, and inclusive set of health, financial and other benefits that support your total well-being. Learn more at the Capital One Careers website. Eligibility varies based on full or part-time status, exempt or non-exempt status, and management level. This role is expected to accept applications for a minimum of 5 business days.No agencies please. Capital One is an equal opportunity employer (EOE, including disability/vet) committed to non-discrimination in compliance with applicable federal, state, and local laws. Capital One promotes a drug-free workplace. Capital One will consider for employment qualified applicants with a criminal history in a manner consistent with the requirements of applicable laws regarding criminal background inquiries, including, to the extent applicable, Article 23-A of the New York Correction Law; San Francisco, California Police Code Article 49, Sections 4901-4920; New York City's Fair Chance Act; Philadelphia's Fair Criminal Records Screening Act; and other applicable federal, state, and local laws and regulations regarding criminal background inquiries. If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation, please contact Capital One Recruiting at ************** or via email at RecruitingAccommodation@capitalone.com. All information you provide will be kept confidential and will be used only to the extent required to provide needed reasonable accommodations. For technical support or questions about Capital One's recruiting process, please send an email to ********************** Capital One does not provide, endorse nor guarantee and is not liable for third-party products, services, educational tools or other information available through this site. Capital One Financial is made up of several different entities. Please note that any position posted in Canada is for Capital One Canada, any position posted in the United Kingdom is for Capital One Europe and any position posted in the Philippines is for Capital One Philippines Service Corp. (COPSSC).

Dallas TX 75201 CornerStone Professional Placement is seeking a Senior Chief Engineer for a commercial real estate client in Downtown Dallas. As the Senior Chief Engineer, you will provide overall leadership and operational oversight of all building systems for a large, Class A office tower, ensuring safety, reliability, regulatory compliance, and exceptional tenant service. Qualified candidates will have 10-15+ years of experience in commercial building engineering, including 15+ years of maintenance management experience and prior leadership of engineering teams. This is an exciting opportunity to oversee a flagship asset with strong compensation, bonus potential, and long-term stability . Requirements & Responsibilities for the Senior Chief Engineer: 10-15+ years of experience operating and maintaining large commercial building systems, preferably within Class A or complex assets Experience supporting 1M+ SF Class A commercial assets with 2,000+ daily occupants BOMI SMT/SME highly preferred (or equivalent advanced technical credentials) Lead and manage all engineering operations including HVAC, central plant, electrical, life-safety, plumbing, and BAS Supervise, train, and develop on-site engineers and maintenance staff Ensure compliance with all federal, state, and local regulatory and life-safety requirements Oversee preventive and reliability-based maintenance programs to ensure maximum uptime Manage vendors, contractors, service agreements, and capital improvement projects Support operating budgets, cost control initiatives, and energy optimization efforts Compensation for the Senior Chief Engineer: Employment Type: Direct Hire Schedule: Full-time, M-F 8am-5pm/7am-4pm Salary: $138,000-$140,000 base + up to 15-20% annual bonus Location: On-site - Downtown Dallas 75201 Benefits: Competitive benefits package, bonus eligibility, and long-term stability To apply for this job, please email resumes to: 📧 ezekielp@cornerstonestaffing.com

Job ID 249569 Posted 15-Jan-2026 Service line GWS Segment Role type Full-time Areas of Interest Engineering/Maintenance, Facilities Management **About the Role:** As a CBRE Building Engineer, you will be responsible for monitoring, maintaining and repairing building system operations and the performance of various areas including plumbing, electrical, painting, roofing, heating, and cooling. This job is part of the Engineering and Technical Services job function. They are responsible for providing support, preventive maintenance, and repairs on equipment and systems. Amazing Opportunity to work for CBRE at large Healthcare facility. + Extraordinary benefits that include 15 days of PTO and 11 holidays & 401K with match! + Other Job Titles: Facilities Engineer, Maintenance Engineer **What You'll Do:** + Perform maintenance and repairs to the mechanical, plumbing, structural, furniture, fire, life safety, and control systems. Keep facility and building systems up to applicable standards as assigned. + Comply with all applicable codes, regulations, governmental agency, and company directives related to building operations and work safety. + Maintain an energy management program. Ensure all systems operate in the most efficient manner. + Assist with the implementation of a preventive maintenance program to ensure that building machinery and systems meet or exceed their rated life. Perform emergency repairs as needed. + Follow departmental policies for the safe storage, usage, and disposal of hazardous materials. Maintain a clean and safe workplace. + Review inspection to building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client. + Apply in-depth knowledge of standard principles and techniques/procedures to accomplish complex assignments and provide innovative solutions. + Coach others and share in-depth knowledge of own job discipline and broad knowledge of several job disciplines within the function. + Lead by example and model behaviors that are consistent with CBRE RISE values. Work to build consensus and convince others to reach an agreement. + Impact a range of customer, operational, project or service activities within own team and other related teams. + Work within broad guidelines and policies. + Explain difficult or sensitive information. **What You'll Need:** + High School Diploma, GED, or trade school diploma or equivalent experience with 4-5 years of job-related experience. Universal CFC certification is preferred. Certifications/licenses as may be required by local or state jurisdictions. Prior shift management or supervisory experience preferred. + Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more. + Ability to exercise judgment based on the analysis of multiple sources of information. + Willingness to take a new perspective on existing solutions. + Microsoft Office (Word, Excel, Outlook, Teams) and prior CMMS experience preferred + Organizational skills with a sophisticated inquisitive attitude. + Sophisticated math skills. Ability to calculate mildly sophisticated figures such as percentages, fractions, and other financial-related calculations. Other Job titles: Facilities Engineer, Maintenance Engineer, Building Systems Engineer, Senior Maintenance Technician, HVAC Engineer, HVAC, commercial, EPA Universal, Electrician, Plumber, Service Technician, **Disclaimer:** Applicants must be currently authorized to work in the United States without the need for visa sponsorship now or in the future. **Why CBRE?** When you join CBRE, you become part of the global leader in commercial real estate services and investment that helps businesses and people thrive. We are dynamic problem solvers and forward-thinking professionals who create significant impact. Our collaborative culture is built on our shared values - respect, integrity, service and excellence - and we value the diverse perspectives, backgrounds and skillsets of our people. At CBRE, you have the opportunity to chart your own course and realize your potential. We welcome all applicants. **Applicant AI Use Disclosure:** We value human interaction to understand each candidate's unique experience, skills, and aspirations. We do not use artificial intelligence (AI) tools to make hiring decisions, and we ask that candidates disclose any use of AI in the application and interview process. **Equal Employment Opportunity:** CBRE has a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disability, veteran status, political belief, or any other basis protected by applicable law. **Candidate Accommodations:** CBRE values the differences of all current and prospective employees and recognizes how every employee contributes to our company's success. CBRE provides reasonable accommodations in job application procedures for individuals with disabilities. If you require assistance due to a disability in the application or recruitment process, please submit a request via email at recruitingaccommodations@cbre.com or via telephone at *************** (U.S.) and *************** (Canada). CBRE, Inc. is an Equal Opportunity and Affirmative Action Employer (Women/Minorities/Persons with Disabilities/US Veterans)

We are hiring a Senior Machine Learning Engineer who will own the design and delivery of production grade machine learning capabilities for an observability and operations intelligence platform that serves large enterprise and public sector customers. The platform supports workloads that follow strict security and compliance expectations including support for United States Federal government environments. This is an on site and hands on role based in the Dallas area. The engineer will work on alert noise reduction, anomaly detection, semantic search, and incident root cause assistance and will take solutions from concept to production. The role involves close partnership with on site DevOps, data engineering, and product teams and requires comfort working with operational data such as alerts, logs, metrics, and incident tickets. Core responsibilities Machine learning solution design Own the machine learning design for operations and reliability use cases including alert noise reduction, alert grouping and clustering, anomaly detection, incident root cause assistance, and cost or usage insights Translate product requirements and reliability targets into clear machine learning problems with well defined metrics such as false positive rate, false negative rate, alert reduction goals, and impact on incident handling time Select appropriate model families for each use case including supervised and unsupervised classical models, deep learning models, and language model based approaches where appropriate Data and feature engineering for operational data Work with data engineering to define and refine pipelines that ingest monitoring alerts, events, logs, metrics, and incident or ticket data from operations tools Design features that capture temporal patterns, service and infrastructure relationships, and business criticality of systems and alerts Implement data validation rules and data quality checks and collaborate on detection and handling of data drift and schema evolution MLOps, deployment, and lifecycle management Establish and maintain a modern machine learning operations workflow including experiment tracking, model registry, automated training, and automated deployment Build production ready inference services such as synchronous application programming interfaces, batch scoring jobs, and streaming based scoring that integrate with backend services and user interfaces Collaborate with on site DevOps on deployment patterns in secure environments including staging, canary releases, controlled rollouts, and rollback strategies Define retraining strategies and schedules for models whose performance depends on changing alert distributions and operational patterns Evaluation, monitoring, and safety Design offline and online evaluation suites using historical alert and incident data including realistic scenarios for alert suppression and recommendation quality Build dashboards that make model behaviour and impact transparent to product owners, operations teams, and technical leadership Monitor model performance and drift in production and drive corrective actions when degradation occurs Incorporate feedback from operators and subject matter experts into continual improvement cycles and where suitable into active learning workflows Security, compliance, and public sector readiness Work within the constraints of secure and regulated deployments including strict access control, logging, and change management practices Ensure that experimentation and training environments that use sensitive or regulated data follow required security and compliance guidelines including expectations associated with United States Federal government workloads and FedRAMP style environments Document model inputs, outputs, assumptions, and controls so that the design can be reviewed by security, compliance, and audit teams Cross team collaboration Coordinate shared machine learning components across multiple products such as embedding services, semantic search services, and evaluation frameworks Participate in architecture and design discussions to promote reuse of patterns and components across the AI and data platform Provide mentoring and technical guidance to junior engineers and data scientists where needed On site collaboration in Dallas Work primarily from the Dallas area office in close coordination with local engineering, product, and leadership teams Participate in in person design sessions, whiteboard reviews, and incident reviews that require physical presence and real time collaboration Help build a strong on site engineering culture through knowledge sharing, pair design, and support for local team members Required qualifications Bachelor's or Master's degree in Computer Science, Engineering, Mathematics, or a related field or equivalent practical experience At least five years of hands on machine learning engineering experience with a strong record of shipping models into production systems Strong programming skills in Python with fluency in libraries such as NumPy, pandas, scikit learn and at least one deep learning framework such as PyTorch or TensorFlow Proven experience building and operating production machine learning systems including application programming interfaces, batch jobs, or streaming jobs and partnering with DevOps teams Solid understanding of the full machine learning lifecycle including data preparation, feature engineering, model training, evaluation, deployment, and ongoing monitoring Experience with at least one major cloud provider. Experience with Amazon Web Services is preferred including familiarity with services such as managed container platforms, serverless functions, object storage, and managed machine learning platforms Experience with machine learning operations practices and tools such as experiment tracking, model registry, automated training pipelines, and automated deployment pipelines Strong skills in experiment design and interpretation including backtesting, A and B style testing, and detailed error analysis Excellent communication skills with the ability to explain model behaviour and trade offs to engineers, product managers, and operations stakeholders Ability and willingness to work full time on site in the Dallas Fort Worth metro area Preferred qualifications Experience with observability and operations domains such as monitoring alerts, logs, metrics, traces, and incident ticket systems Experience in environments that support United States Federal government or other highly regulated workloads with an understanding of security and compliance constraints Background in large language models and retrieval augmented search or summarization for operational or knowledge management use cases Familiarity with vector databases and semantic search platforms and experience building embedding based retrieval systems Experience delivering anomaly detection, clustering, and time series modelling solutions at meaningful scale Prior experience in a product engineering setting where the engineer owns design, implementation, and operational aspects of machine learning services Technology stack Candidates do not need experience with every item but should be comfortable with most of the following. Languages and libraries Python, NumPy, pandas, scikit learn PyTorch or TensorFlow or comparable deep learning tools Cloud and infrastructure Major cloud provider such as Amazon Web Services or similar Experience with services such as managed Kubernetes or container platforms, serverless compute, object storage, and managed machine learning services Machine learning operations and orchestration Tools for experiment tracking and model registry such as MLflow or managed registry services Workflow tools such as Apache Airflow or managed workflow orchestration services Observability and integration Familiarity with logging and metrics solutions such as CloudWatch, Prometheus, Grafana, or similar Experience exposing machine learning services through restful application programming interfaces or similar integration methods

Gray Construction is looking to add a Japanese Speaking Project Engineer - Food and Beverage to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Visa Sponsorship: This role is not eligible for visa sponsorship. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

A growing tech company in Chicago is seeking a versatile Product Engineer to own projects from start to finish. The ideal candidate is comfortable with a wide range of tasks and will collaborate closely with product teams to implement features. This role offers a fast-paced environment, automated tooling, and opportunities to influence product design. Benefits include competitive salary, unlimited PTO, and a strong commitment to diversity. #J-18808-Ljbffr

Join us as a Design Engineer, where you will be a key driver of our growth through innovative product design and process optimization. We are seeking a proactive problem-solver to lead custom product development and cost-saving initiatives, ensuring our engineering solutions are durable, efficient, and tailored to our clients' needs. What You'll Do Develop high-integrity designs that balance performance with cost-efficiency and manufacturing feasibility. Support new product launches and provide technical expertise across the company. Manage project timelines, build accurate BOMs, and refine manufacturing workflows. Requirements 2+ years of custom design experience, specifically in belt conveyor design. Degree in Mechanical Engineering or equivalent field experience. Expert in steel fabrication, static stress analysis, and mechanics of materials. High proficiency in SolidWorks (Sheet Metal & Weldments) and FEA tools.

The Systems Design Engineer will support control system applications throughout the project lifecycle from initial design concepts through to installation and subsequent client support. Roles & Responsibilities: Implementation and translation of appropriate engineering solutions from client specifications and instrument databases into Equipment Designs, Logic Diagrams, Schematics, General Arrangements, Loop Diagrams, Heat & Power Calculations, Field Cable Connection Schedules and other documents as appropriate. • Plan, schedule, coordinate and monitor resources for projects including setting and managing timescales and budgets. • Provide verbal and written reports to communicate project status as required and contribute to project review meetings. • Visit external panel manufacturing facilities to assess progress, provide technical assistance and for final inspection and sign off. • Provide technical telephone assistance to customers and suppliers when necessary. • To perform work in compliance with company's QA Standards and Procedures. • Client liaison and interface management. • Development and maintenance of customer relationships Qualification & Education Requirements: A bachelor's degree or similar qualification in a relevant engineering discipline. • Minimum of 5 years of experience within oil and gas, petrochemical, or related industry. • Within 30 days of hire, and prior to performing any work at client field sites, the following requirements must be met: o OSHA 10-Hour General Industry Training through an OSHA authorized training provider. o ANSI/ASSP Z390.1-2024: Hydrogen Sulfide Training. o TWIC (Transportation Worker Identification Credential). Enrollment in the DISA NASAP Consortium Policy is required. Additional policies or programs may be mandated depending on specific client or project requirements. Preferred Skills: Computer literate, with experience of PC-based word processing, spreadsheet and database programs. • Experience of control system applications throughout the project lifecycle from initial design concepts through to installation and subsequent client support. • Software design and support experience of PLC/HMI or DCS based control systems. • Knowledge of Automation Logic Solvers (BPCS and/or Safety Systems) ControlLogix, CompactLogix, GuardLogix, AAdvance, Trusted. • Application experience of third-party systems integration of other manufacturers' equipment. • Proficiency in network design and configuration of network devices. • Hardware design and support experience relating to control system equipment design and layout (panels, control desks and control rooms) and integration of other manufacturers' equipment. • Understanding of Control and Instrumentation. • Understanding the requirements of Functional Safety Management to IEC 61508/ 61511. Demonstrable evidence of similar work performed to a competent standard. • Experience in control systems engineering which relates to industrial automation systems (BPCS, CCS, SIS, BMS, HIPPS, LNG). • Team player with the ability to integrate with other team project members

Immediate need for a talented RTL Design Engineer. This is a 06-12+ Months contract opportunity with long-term potential and is located in Dallas, TX(Onsite). Please review the job description below and contact me ASAP if you are interested. Job Diva ID: 26-00148 Pay Range: $58 - $60/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Requirements and Technology Experience: high-speed protocols experience such as PCIe, DDR, USB, SCSI, Ethernet, MIPI, and UFS Good technical leadership skills with ability to guide the CWFs on SoC execution Should have a good understanding of SoC architecture and should be able to map the Arch spec to implementation level details Experience in PCIe and Ethernet IP integration Hands-on experience on AMBA based bus protocols Excellent communication skills are a must Experience: 8-15 years Our client is a leading IT Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Akkodis is seeking a Design Engineer III for a 3 month Contract (with extension or Hire job with a client in Gainesville, TX (Onsite). Ideally looking for applicants with a solid background in the Aerospace/Automotive industry is a must. Rate Range: $45/hour to $48/hour; The rate may be negotiable based on experience, education, geographic location, and other factors. Summary Design and coordinate aircraft seat and seat-component development for new and ongoing programs. Partner with customers, suppliers, program management, and manufacturing to deliver compliant designs on schedule. Requirements Bachelors in Mechanical, Aerospace, Manufacturing, Design, or related engineering. 5+ years design experience (4+ with Master's) Advanced CATIA V5 / PTC Creo skills Strong knowledge of aircraft seating systems Experience with drawings, BOMs, and manufacturing support Strong communication and ability to work independently Preferred: APQP, DFMEA/PFMEA, Control Plans If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at ***************************. Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

The Fordy Group is seeking a Project Engineer to provide critical technical and administrative support for complex industrial construction projects. The selected candidate will be responsible for assisting Project Managers in the planning, execution, and closeout phases, ensuring technical accuracy, documentation compliance, and seamless coordination between engineering, field operations, and clients. Essential Functions / Duties: • Actively promotes and strengthens our core values and culture of Mission First, People Always through everyday actions and decisions • Provide exceptional, first class customer service. • Assist with the execution and management of the terms of projects contracts. • Prepare and present computer-generated spreadsheets and reports. • Maintain regular communication and collaboration with entire project team, including Project Foreman, Project Manager, General Contractor, Architect/Engineer and other subcontractors. • Generate, maintain and facilitate project documentation in the execution of the construction processes for all -phases of the project. This will include, but is not limited to, requests for information, submittals, drawings, specifications, purchase orders, material orders, change orders, close-out documents, etc. • Perform material take offs from drawings to help generate estimates and changes. • Demonstrate attention to detail, efficiency and integrity in all aspects of the work. • Maintain flexibility with assigned work environment and assigned project locations. May be required to commute to various jobsite locations. • Attend and conduct meetings as required. • Comply with all company operating policies, procedures and safety programs as established. • Other duties may be assigned as specific project dictates. Qualifications Requirements: • Bachelor's degree in Electrical Engineering, Construction Management or related field; OR 2 years' prior experience in related field via internships, co-ops and/or industry employment. • Excellent written and verbal communication skills. • Ability to multi-task, stay organized and manage time effectively in a fast-paced environment. • Flexibility and adaptability in utilized a wide range of computer software. • Engineer-in-training certification, Journeyman license and field experience preferred, but not required. • Strong interpersonal communication, attention to detail, organization, and follow-up skills. #construction #texas #austin #dallas #houston #projectengineer #mechanical #industrial

Key responsibilities include: • Work on RTL design of System IP blocks • Work independently while closely collaborating with other designers as well as members of verification, physical design, performance and power teams • Work on developing and maintaining Front-End Tools, Flows and Methodologies • Work on creating scripts that automate repetitive daily tasks of team members • Support Silicon bring-up activities Requirements Minimum requirements: • Proficient in RTL design using Verilog and System Verilog • Experienced in setting up and maintaining front-end tools for Synthesis, LEC, Lint and Low Power Analysis • Excellent debug and problem-solving skills. Experienced in Silicon bring-up activities • Experienced in timing and coverage closure • Proficient with UNIX/Linux and programming languages such as PERL, Python, TCL, and Unix Shell Scripting • Prior experience of having worked with interconnects, caches and/or cache coherency would be an added advantage Preferred candidate will possess the following: • Verilog/System Verilog • GIT • Perl • Python • Tcl/Tk • C/C++ • Jenkins, Jira

Job Title: Engineer - Product Engineer Employment Type: Permanent Employee Start: January 2026 Workplace Type: Onsite ** Please note this position requires US Citizenship or GC status. Visa sponsorship is unavailable at this time. Summary: The Engineer will provide technical support to production to overcome daily challenges. Engineer will also use procedures and instructions to initiate the analysis process when product failure occurs. Investigations and researched for root causes with analysis documented, recorded, and communicated internally and provide solution. Engineer may contact Client Company for any quality escalations. Responsible for first level failure analysis on Customer Products. Essential Duties and Responsibilities include the following. Other Duties not listed may be assigned. Responsibilities Include but not limited: Have appropriate knowledge with the various systems including but not limited to Windows, Android, CMD and Linux tools, and procedures used in Production for Repair and failure analysis. Help Team to setup repair line including Tools and ESD grounding. Skilled in communication, problem solving, and applying experience and expertise. Identify optimum analytical approaches critical to problems. Requires communication with local and overseas team via emails and conference calls. Prepare parts and components for Factory team second level failure analysis. Work inside customer lab. Other duties as assigned. Team Leadership 10% of Job Responsible for maintaining a positive work environment while supporting the companys culture. Responsible for fostering a healthy and safe work environment, focusing on the well-being of all associates. Maintains and strengthens internal, external customer, and supplier relationships. Communicates and works well with all business partners. Ensures inventory management and merchandise allocation flows product through the warehouse in the most cost efficient and productive manner. Qualifications: Education and/or Experience Minimum Associate degree in product design, mechanical, electronic or computer engineering or 3+ years of equivalent experience as FA engineer for computing devices. Hands on Experience in hardware assembly and disassembly on computing devices Essential Skills but not Limited: Requires excellent written and oral communication skills. Must have strong Office suite knowledge (excel, word etc.). Requires moderate knowledge of UEFI, WINPE, CMD, Batch files, SDK, ADK, Configuration files such as ini. Effectively communicate concepts and solutions with various levels of the organization. Effectively liaison between Company and Client. Must be able to work cross-functionally with minimal supervision. Requires strong analytical and statistical skills. Requires flexibility to work overtime for special projects or business supports. Competencies: Shows determination to achieve excellent results Finds better ways Demands top performance Inspires commitment Working Conditions Must be able to tolerate moderate to high noise levels in a warehouse environment. Office and outside environmental conditions found in the warehouse, hot in the summer, cold in the winter. Individuals may need to walk for an extensive period of time while working and walking the facilities; to reach over shoulder heights; bend or stoop below the waist; repetitive wrist, hand, or finger movement. Requires the physical ability to lift 25 pounds.

Bauer Foundation Corp. (BFC) is a Florida corporation and the U.S. subsidiary of the world-wide operating Bauer Group based in Schrobenhausen, Germany. The Bauer Group is a world- renowned foundation contractor, designer, and builder of the world's finest foundation equipment. BFC, as part of the Bauer construction division, is a leader in the execution of complex excavation pits, ground improvement, deep foundations, and vertical seals, utilizing the most up to date equipment and installation techniques. Bauer Foundation Corp. provides all types of foundation solutions and services for industrial, commercial, residential, and governmental construction projects. Bauer Foundation Corp. promotes Bauer services and technology throughout the entire United States. BFC is looking for a dynamic individual with experience as a Ground Improvement Design Engineer, in the special foundation industry. If you have a passion for progress, we want to hear from you! Position: Design Engineer Reports to: Chief Engineer Location: The Woodlands, TX (or Odessa, FL) - this is an ON SITE position Schedule: 8a-5p M-F Relocation available for the right candidate! The Design Engineer supports the business during all project phases (pre-construction, execution, close-out) with engineering services. The employee works under the guidance of Chief Engineer and Ground Improvement Manager and utilizes the CAD Technician. Responsibilities: • Design/value engineering of foundations systems: o Design/VE of ground improvement (aggregate piers, vibro-compaction, vibro-replacement, rigid inclusions) • Maintenance of geotechnical report database/repository • Review of load test data/modulus test data and maintenance of load test database/repository • Perform QC of ground improvement installation • Support project teams in the preparation of pre-construction and close-out submittals • Lead preparation of shop drawings • Lead preparation of as-built drawings Requirements of this Positions: • Applicants should have a Bachelor's degree in Civil or Geotechnical Engineering. • A minimum of 2 years experience in geotechnical or foundation structural design preferably in the design of Ground Improvement (aggregate piers, vibro-compaction, vibro-replacement, rigid inclusions). • Must be authorized to work in the US. • Preference will be given to candidates with P.E. license, Master's degree and experience in geo-structural design. Expectations include: • Knowledge of Microsoft Office and AutoCAD products. • A strong work ethic and dedication to your own professional growth. • Conscientious work habits that include attention to detail, clear documentation, and communication skills • Respectful team player who demonstrates a commitment to aiding the development of people around you. • A willingness to accept and implement constructive feedback from managers within the company. • Ethical behavior at all times. Compensation and benefits: Competitive salary; commensurate with experience. Benefit packages available - health insurance, life insurance, short-term disability, 401(k) plan with employer match, paid holidays and vacation, paid parental leave, and tuition assistance Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor an employment Visa at this time. BAUER Foundation Corp. is a DFWP and an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.