Operations engineer jobs in Cape Coral, FL - 48 jobs

Temp Landfill Operations Engineer Pay Rate: $54.00/hour Schedule: Monday-Friday, 8:00 AM-5:00 PM (40 hours/week) Our client is seeking a Senior Engineer to support the Solid Waste Department in a consultant capacity. This role will provide project management advisement, engineering expertise, and operational support on capital improvements and other technical assignments related to landfill operations. Key Responsibilities: Provide engineering consultation and subject matter expertise on landfill operations Review and submit regulatory permits, reports, and data Advise on fill sequence progress, confirmed through survey or data Support staff with technical and engineering projects Oversee or complete advanced technical assignments Manage and direct consultants, contractors, and internal staff Perform technical analyses and certify plans and specs Coordinate assigned capital improvement projects Sign and seal documents as a licensed professional engineer Qualifications: Bachelor's degree in Civil Engineering or related technical field Four (4) years of project experience post-licensure Licensed Professional Engineer (P.E.) or Geologist (P.G.) required Master's degree may substitute for one year of experience Preferred Certifications/Experience: SWANA Manager of Landfill Operations Florida Landfill Operator Certification Florida Professional Engineer License Experience with eBuilder software, AutoCAD Civil 3D, and survey methods Environmental engineering or solid waste management background Additional Requirements: Must be able to occasionally lift up to 50 pounds Work may involve exposure to outdoor conditions and occasional contact with chemicals or fumes Steel-toe shoes required Valid driver's license required (driving may be necessary, but no assigned vehicle)

With general direction, creates engineering designs including: Reviews draft designs for compliance with federal, state and local regulations and signs off on completed designs. Ensures that firm policies and practices are followed on all designs. Performs site reviews and studies, as needed, to ensure designs are aligned with location specifications. Updates design requirements as necessary. Contributes to firm's TKM by developing white papers and technical design documentation of new or special case designs, studies, etc.. Submits technical papers and designs for publishing to technical journals. Collaborates with sales staff to create proposals in response to current and potential client requests for proposal (RFPs). Reviews draft proposals for adherence to firm, industry, state, local and federal regulations and best practices. Meets with current and potential future clients to review their current and future design needs. Attends conferences, symposia, etc. to improve the visibility of the firm's products and services in collaboration with applicable sales staff. Performs other duties as required. Provides technical guidance and training to more junior staff. Mentors more junior staff and develops them for future growth within the discipline and firm. May supervise the work of junior engineers on project work. **Job Title:** Mechanical Engineer 5(Industrial/Process) **Group:** IND **Certification/License Requirements:** Professional Engineer **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree in Mechanical, Architectural or Chemical Engineering, or in Engineering Technology or related discipline. Professional engineering (PE) license. 7 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree. **Preferred Qualifications:** EPC projects for industrial / petrochemical clients focused on process and utility piping, process mechanical, and material handling systems. Familiarity with CAESAR, Autodesk products (AutoCAD, Plant 3D, Revit), and Bluebeam. Development of Equipment Data sheets, Package specifications, Technical Bid Tabs. RFQ's **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 10% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** Expert Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices. Expert Knowledge of engineer principles of design. Expert Knowledge of Microsoft business software (excel, word, etc.). Excellent verbal and written communications skills. Expert knowledge of federal, state and local regulations. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $90,605 **Pay Range Maximum:** $158,579 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Fully Remote or Hybrid Work Options may be considered for successful candidate. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

COMPANY DESCRIPTION e2Companies is the creator of the industry's first Virtual Utility and a leading provider of integrated solutions for power generation and distribution of reliable, conditioned power. We are committed to delivering energy resiliency, reliability, and regulatory compliance for our customers to unlock savings and revenue opportunities. We provide the most complete business model for data center, manufacturing, commercial, and industrial customers. e2Companies was recently awarded the 2025 Tech Catalyst of the Year for Southwest Florida, highlighting the innovative Virtual Utility technology, which allows businesses to monitor and manage their own on-site power solution. e2 was also recently named one of the best places to work in Southwest Florida by the Best Companies Group. We are a fast-growing company that thrives on solving challenges in the energy space. We believe in a healthy work-life balance and focus on giving back to our communities with our e2 for Good program. PURPOSE We are seeking a Mechanical Engineer to support the design, development, and lifecycle management of distributed power generation and energy storage systems. This role partners closely with electrical engineering, manufacturing, R&D, and operations teams to deliver reliable, scalable electro-mechanical solutions for commercial, industrial, utility, and data center customers. RESPONSIBILITIES Plan, conceptualize, and develop mechanical designs that meet customer requirements and comply with applicable codes, standards, and certifications Design electro mechanical systems and assemblies supporting generation, energy storage, and integrated power solutions Create and maintain mechanical drawings, layouts, and documentation in accordance with e2 project models and standards Develop mechanical designs and Bills of Materials based on sales orders, customer specifications, and regulatory requirements Deliver designs on time, on budget, and to quality expectations following the e2 project execution model Contribute to R&D efforts for new and existing electro mechanical systems and platforms Oversee and support mechanical testing, validation, and certification activities Drive department level R&D initiatives in collaboration with cross functional stakeholders to support future growth Participate in quality improvement, cost reduction, standardization, and continuous improvement initiatives Support manufacturing operations by troubleshooting production issues, identifying bottlenecks, and improving design for manufacturability Assist with product quality reviews and ensure mechanical designs maximize production efficiency Provide technical support to Service Technicians and customers including troubleshooting, service guidance, and spare parts support Support the sales organization by translating customer requirements into mechanical solutions and providing cost estimates Collaborate with suppliers and internal teams across the full value chain Update and maintain documentation for functional descriptions, mechanical designs, and Standard Operating Procedures Ensure project specific documentation is accurate, complete, and aligned with current standards Perform additional duties as assigned in support of engineering and organizational objectives BASIC QUALIFICATIONS (MUST HAVE): Bachelor's degree in Mechanical Engineering or an equivalent combination of education and professional experience 5+ years of professional mechanical engineering experience in an industrial, commercial, manufacturing, or power generation environment Proficiency with AutoCAD or comparable mechanical CAD design software Hands on experience obtained in a professional working environment Academic coursework, internships, or research alone do not satisfy experience requirements Technical knowledge of electro mechanical systems and manufacturing processes Ability to work effectively in a team based, fast paced environment Strong attention to detail and ability to follow defined processes and standards PREFERRED QUALIFICATIONS (NICE TO HAVE): Experience with power generation, energy storage, or distributed energy systems Experience supporting R&D and product development initiatives Ability to provide technical guidance and mentorship to junior engineers Familiarity with mechanical testing, certifications, and compliance requirements Ability to quickly learn new electro mechanical technologies WORK ENVIRONMENT AND PHYSICAL REQUIREMENTS Exposure to manufacturing and production environment with electrical components, battery modules, tools, and powered equipment Prolonged standing, walking, bending, kneeling, crouching, and repetitive use of hands and arms Ability to lift, carry, and position materials weighing 50 pounds or more, with or without reasonable accommodation Ability to read and interpret electrical schematics, diagrams, labels, and instructions Safe work around low voltage electrical systems and LiFePO4 batteries while wearing required PPE Moderate noise levels and compliance with all safety policies, OSHA, NEC, and lockout tagout procedures HERE'S WHAT YOU GET: Competitive Pay reflective of your skills and experience Medical, Dental, Vision, Life, and 401K benefits 5 PTO days (increased with tenure) / 5 sick days 8 Federal Holidays Paid Training (OSHA 10, NFPA 70E) Childcare assistance (Up to $300 per month) “Work Hard, Play Hard” culture with team events and e2 for Good initiatives Ready to shape the future of green energy? Join our innovative team today! Not the right fit or the right time? Join our Talent Community to be considered and notified of for future opportunities! e2Companies, LLC is an equal opportunity employer. All qualified applicants encouraged to apply!

Design Engineer I Job Description Design Engineer I is a technical staff position for individuals that typically possess between zero and three years of experience within a consulting structural engineering firm or similar. This is primarily a task-oriented position. Tasks are administered individually by a Supervisor, typically by Project Managers and occasionally by Project Engineers. Tasks are reviewed by a Supervisor while the task is both in-progress and complete. A Design Engineer's performance is judged primarily on the accuracy and consistency of results as well as the level of independence with which those results were achieved. Duties and Responsibilities Tasks Generation of 3-D Building Information Models (BIM) and 3-D Structural Analysis and Design Models utilizing advanced software programs Computer-aided and hand-calculated structural analysis, design, and detailing of steel, concrete, masonry, and timber systems Introductory structural design coordination with other design professionals including Architects and Engineers of various disciplines Introductory preparation of Construction Documents within the Autodesk REVIT environment Review of structural submittals and basic RFI's Construction Observation and Special Inspections on Jezerinac Group and other projects Deliverables Production of complete and accurately modeled BIM and structural analysis and design models Production of accurate and orderly-kept calculations Production of accurately extracted structural plans and details per JG drawing presentation standards for review supervisor. Production of Field Observation, Inspection, and Investigative Reports per JG reporting standards for review by supervisor. Project Management Regularly discuss allotted time per task with Project Manager Knowledge Required Technical Model Building Codes, i.e., FBC and IBC Design Standards, i.e., ASCE-7 Material Codes and Design Standards, i.e., ACI-318 and AISC Manuals of Steel Construction JG design, BIM modeling, and drawing presentation standards, where applicable Software user manuals, i.e., Autodesk REVIT, RAM SS, RAM Concept, Enercalc Understanding of statics, mechanics of materials, and traditional and matrix structural analysis - exercise general critical thinking skills consistent with such understanding Understanding of steel, concrete, masonry, and timber design methodology Field observation and inspection techniques Work Quality Produces logical and accurate results backed by organized and clearly presented structural calculations that are easy for supervisors to understand Follows JG design, BIM modeling, and drawing presentation standards, where applicable Uses proper grammar within written and verbal communication Production of neat, accurate, and graphically pleasing documentation including reports Schedules timely in-house task/project quality reviews of his/her work and follows through on review comments Time Management / Efficiency / Self-Motivation Sets goals throughout day for the completion of individual tasks Seeks collaboration with supervisor in determination of allotted time per task and produces work in allotted time period Works to simplify analysis, design, and drawing presentation Completes tasks on time and only once. Spends little time correcting design errors or incomplete or erroneous documents Logs time accurately on a daily basis per Project Manager's contractual agreements Voluntarily seeks job knowledge outside of office hours including reading of textbooks, codes, material specifications, software manuals, and industry trade publications. Communication and Teamwork Speaks clearly and efficiently to colleagues, supervisors, clients, and other industry professionals using accurate technical terminology Writes grammatically correct, efficient, and technically accurate reports, emails, or other inquiries Works collaboratively with others, openly and thoroughly sharing information with others Leadership and Culture Reaches out to instruct others when their technical acumen on a subject is greater than his/her colleague's Displays an enthusiastic and positive attitude, treats co-workers with respect, works to resolve disputes - not promote them, and arouses enthusiasm in others and promotes their development Is an internal champion of JG by setting positive examples for other employees; and Provides management with constructive suggestions on ways to make JG a better company and a better place to work Firm Promotion Conducts his or herself in a professional manner with all industry contacts Provides helpful consultation and recommendations to project team members Communicates accurately through verbal, electronic, and written channels Always Promotes JG and their services Responds to client and project concerns and needs in a professional and timely manner Seeks and presents additional opportunities for JG through current and past industry contacts

The City of Fort Myers strives to be an employer of choice and most of our employees turn jobs into long term careers. The salary shown in the job description is the full range for this position from entry to later career. NEW EMPLOYEES ARE HIRED AT, OR NEAR THE ENTRY POINT SHOWN, DEPENDING ON QUALIFICATIONS AND RELEVANT EXPERIENCE. FLSA Status: Exempt Safety Sensitive: NO Level II Screening: NO Under the general direction of the designated supervisor, position is responsible for providing professional engineering by administering and producing designs, cost estimate, technical specifications, drawings, time schedules, budgets and reports for a variety of municipal utility projects. This position will maintain oversight of contractors and inspectors during construction; provide oversight or develop, analyze and report on utility functions including, but not limited to, regulatory compliance, systems operations, and utility/developer agreements. Carries out supervisory responsibilities in accordance with the City's policies and applicable laws. Responsibilities include planning, assigning, and directing work; appraising performance; addressing complaints and resolving problems. Responsibilities and Reporting During an Emergency Situation: Essential Employees may be required to work during a declared emergency. Depending on the nature of the emergency, this may require working around the clock for several days on short notice. Non-Essential Employees will not be required to work during a declared emergency. The employee's Department Head will determine when the employee will be required to work. Perks and Benefits * Free city-paid employee health coverage, additional for spouse or family * 3 weeks Paid Time Off (sick & vacation) * 13 paid holidays * Pension plan & optional Deferred Compensation * City-paid life insurance * Optional Vision, Dental, and Disability Insurance * Tuition reimbursement * On-site Gym facility * And much more! Duties/Responsibilities * Survey and evaluate actual conditions of City infrastructure for the purpose of preparing plans, specifications and cost estimates for water, sewer, drainage, and roadway construction projects which meet all federal, state and local regulations and guidelines. * Review design plans and bid specifications from outside consultants for compliance with City requirements, design standards, and specifications. * Assist technical staff in the understanding and application of Land Development Code and Comprehensive Plan requirements. * Coordinate water, sewer, drainage, and roadway infrastructure expansion needs with other governmental agencies. * Provide technical support and recommendations to City Engineer through written and oral communication. * Coordinate with and assist City Public Works and Public Utilities field personnel regarding compliance with City technical requirements. * Assist in preparation of capital improvement project budget for public works and utility projects. * Provide supervision to engineering designers and technicians. * Provide technical assistance to development review section relating to review and approval of proposed infrastructure improvements. * Supervise project performance of assigned staff to ensure timely progress and completion of duties and responsibilities. * Initiate bidding process, organize and conduct pre-bid and pre-construction conferences. * Set interdepartmental uniform design standard guide; provide technical support in engineering related matters. * Perform related duties as assigned. * This position requires regular and reliable attendance and the employee's physical presence at the workplace. * Performs other duties as assigned. KNOWLEDGE, SKILLS AND ABILITIES * Proficient in the use of word processing, spreadsheet, database and presentation software. * Ability to communicate effectively in oral and written form. * Ability to establish and maintain effective working relationships. * Ability to read and interpret engineering plans and specifications. * Ability to speak clearly and persuasively in positive and negative situations. * Ability to operate necessary equipment, including personal computer, calculator, printer, copier, facsimile and other standard office equipment. Minimum Requirements * Bachelor's degree in Civil Engineering or related field. * Four years of experience; or an equivalent combination of education, experience, and/or training that provides the required knowledge, skills, and abilities. * Must possess Engineering Intern Certification and be able to obtain a Professional Engineering License from the state of Florida within one (1) year from date of hire; OR must possess a Professional Engineering License from the state of Florida at time of hire. * Must possess a valid Driver's License with an acceptable driving record. PREFERRED QUALIFICATIONS * Experience in water and sewer utilities preferred.

GARNEY CONSTRUCTION A Project Engineer position is available in Cape Coral, FL. This position will act as the backbone of the project management team and keep the job on track. Great attention to detail and the ability to organize and plan will ensure success in this position. WHAT YOU WILL BE DOING You will assist the project management team with tasks such as negotiating and purchasing materials, maintaining documents, and acting as a point of contact with owners, architects, and engineers. Responsibilities: * Create Submittals and RFI's. * Coordinate projects from start to finish. * Assist with estimating. * Project setup & closeout. * support field operations. * maintain detailed job costs. * Work professionally with owners and engineers. * Assist in scheduling projects and crews. WHAT WE ARE LOOKING FOR The ideal candidate will have a degree in civil engineering, construction management, or another related field and is willing to travel and work the days and hours required to ensure the project's success. This position is perfect for someone seeking entry-level project management experience with an industry leader. LET'S TALK THE PERKS! * Employee Stock Ownership Plan (ESOP) & 401K Retirement Plan. * Health, Dental, Vision, and Life Insurance. * Health Savings Account (HSA) / Flexible Spending Account (FSA). * Long-term Disability, Wellness Program & Employee Assistance Plans. * Holidays and PTO CONTACT US If you are interested in this Project Engineer position in Cape Coral, FL. then please APPLY NOW. For other opportunities available at Garney Construction, go to careers.garney.com. If you have questions about the position or would like more information, please contact Jody Roberts - by email *********************** Garney Construction and its subsidiaries are committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Garney Construction is a background screening, drug-free workplace. Agency Disclaimer: All vendors must have a signed Garney Construction Agreement, authorized by the Executive Team, to receive payment for any placement. Verbal or written commitments made by anyone other than a member of the Executive Team will not be considered binding. Any unsolicited resumes sent to Garney Construction or submitted to employees outside of the Recruiting Team will be deemed the property of Garney Construction. In such cases, Garney Construction will not be obligated to pay any placement fees. THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Fort Myers Nearest Secondary Market: Cape Coral

Systems Engineer II serves as a technical professional responsible for designing, implementing, and supporting enterprise endpoint management and systems infrastructure. This position functions as a subject matter expert in modern device provisioning, automation, enterprise software deployment, and Microsoft 365 endpoint workloads. Systems Engineer II supports FGCU's modernization strategy by helping transition device management from traditional imaging (SCCM) to modern cloud-based provisioning through Microsoft Intune, Windows Autopilot, and related Microsoft 365 tools. Typical duties include but not limited to: * Assists in the design, implementation, and maintenance of enterprise-level endpoint and systems infrastructure services. * Serves as a subject-matter expert for Microsoft Intune, Windows Autopilot, Endpoint Security, and Windows Update for Business. * Supports Microsoft 365 workloads, including device configuration, compliance policies, and conditional access. * Enhances automation using scripting languages such as PowerShell, Intune configuration scripts, or API integrations. * Performs troubleshooting, monitors system performance, and ensures endpoint security compliance. * Develops and maintains system documentation, diagrams, and operational runbooks. * Participates in technology evaluations, testing, and implementation of new endpoint solutions. * Supports the transition from imaging to provisioning and the lifecycle management of Windows and mac OS devices. * Assists System Engineer team members with technical issues. * Participates in business continuity and disaster recovery planning as it relates to endpoint infrastructure. * Supports cross-training initiatives and staff development efforts within the Endpoint Deployment Team. Additional Responsibilities: * Performs other job-related duties as assigned. Additional Job Description Minimum Qualifications: * This position requires six years of directly related full-time experience or, as an alternative, a Bachelor's degree in Computer Science or related field and two years of full-time experience directly related to the job functions. Preferred Education: * Master's degree from an accredited institution. * Experience using enterprise endpoint management systems such as Intune, SCCM, JAMF, or similar MDM/UEM tools to deploy software, apply configuration and security policies, manage updates, and maintain device compliance. * Experience with PowerShell or similar scripting tools to assist with automation, troubleshooting, and configuration management * Experience with server system products involving a variety of software and hardware implementations. * Microsoft Certified: Endpoint Administrator Associate * Microsoft 365 Certified: Administrator * JAMF Certified Admin (JCA) * CompTIA Security+ * ITIL Foundation * VMware Certified Professional Knowledge, Skills, & Abilities: * Knowledge of networking concepts (e.g. Systems, Protocols, Directory Services). * Knowledge and proficiency with relevant business systems, operating systems, and servers. * Knowledge of and ability to administer cloud-based applications (Saas). * Skill in managing servers and storage hardware. * Skill in using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. * Advanced verbal and written communication skills and the ability to present effectively to small and large groups. * Ability to take initiative to plan, organize, coordinate and perform work in various situations when numerous and competing demands are involved. * Ability to work independently and follow through on assignments. * Ability to provide professional customer service. * Ability to present technical strategies to leadership; produce clear diagrams/runbooks; mentor/train staff. * Diagnose complex issues; design and implement solutions; set standards; plan long term improvements. * Scope/plan/manage complex projects, budgets, timelines, risks; deliver status to stakeholders; run post implementation reviews; ensure business continuity. * Handle escalated issues; design user centered solutions for faculty, staff, and students; empathetic stakeholder management. * Lead cross team initiatives; influence direction; drive change management and culture of accountability/continuous improvement. Pay Grade 18 FGCU is a State University System of Florida member and an Equal Opportunity and Equal Access employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, or protected veteran status.

Company Name: Baker Concrete Construction, Inc **Req ID** : 7120 **Travel:** Up to 25% **Number of Openings:** 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. **Summary** The **Project Engineer** supports field activities and spends a majority of time working with the Project Manager supporting project administration on multiple small projects, or one medium to large-size projects. Activities include managing the job transition process; and supporting the management of cost and schedule, constructability, technical evaluations, quality, safety, work planning, procurement, contract management, regulatory compliance, etc. **Roles and Responsibilities** The **Project Engineer** will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. + Generates and obtains approvals of monthly billing and earned values + Develops and manages the project schedule on small or mid-sized projects + Analyzes targets and goals, job cost summaries, and other reports + Alerts the Superintendent and Project Manager of project impact relating to resource management, crew make-up/size, etc. + Generates and obtains approval of the initial budget and subsequent updates, and reviews weekly job cost summaries and advises the Project Manager + Generates estimates of change orders and may interface with pre-construction on original bids + Collaborates with pre-construction and the project team to manage the job transition process, communicate project requirements, and develop the initial procurement plans, budgets, etc. + Generates material quantity take-offs, scoping documents, terms and conditions, delivery, etc. as applicable to support the procurement process + Generates requests for proposal(s), solicits and reviews quotations, and recommends a procurement decision to Project Manager + Prepares field purchase orders for standard purchase packages, and generates and obtains approval of Major Purchase Orders + Gathers and roughs-in monthly financial reports, and participates in the project financial reviews + Works with the Project Manager to approve and code project invoices + Generates and obtains approval of technical records such as constructability reports, RFI's, inspection records, work packages and deviation reports + Coordinates with the Superintendent, Field Project Engineer, and Line and Grade to generate required as-built records + Manages work package closure, punch lists, and project turnover process and approves pre- and post-pour checklists + Collects necessary documentation to identify and determine impact of potential contract changes, disputes, and claims + Leads LEAN/SQP committee and identifies improvement opportunities + Ensures all subcontractors are in compliance with terms of subcontracts, generates, and obtains approval on impact notices as needed + Reviews and confirms reports documenting compliance (Company and subcontractors) with prevailing wage, workforce utilization, MBE/SBE participation, etc., and advises the Project Manager of issues + Interfaces with Safety and Risk Management in establishing clinics, managing first report of injuries, and assisting with co-worker case management + Follows Company Recruitment and Hiring Guidelines + May conduct new-hire orientation and process E-Verify (must be certified) + May coordinate tracking and completion of training requirements with project management **Requirements** + Bachelor's degree from an accredited college or university and 2 years' of experience or 6 years' of construction related experience and/or training; or equivalent combination of education and experience + Proficiency in Microsoft software programs such as Word, Excel, and PowerPoint The following competencies are needed to successfully perform this job: + Ability to read, analyze, and interpret general business documents, technical procedures, and government regulations + Ability to write reports, business correspondence, and procedures + Ability to communicate well with all levels of workers involved with the project + Ability to apply concepts such as fractions, percentages, ratios, proportions, geometry, and trigonometry to practical situations + Ability to analyze and compute mathematical differences from all stages of drawings from conceptual to final drawings including development of shop drawings Ability to understand Cost Accounting + Basic understanding of construction software such as Primavera, Timberline, Vista and the like + Ability to understand, customize and modify spreadsheets + Ability to direct work and evaluate strengths and weaknesses of co-workers + Ability to work in a team environment + Ability to define problems, collect information, establish facts, and draw valid conclusions + Ability to develop construction schedule via the critical path method + Ability to understand contracts, specifications, drawings, and scope of work + Ability to be proactive in maximizing our return on investment at all time At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR.

CPH is a multi-disciplined Engineering and Architectural design firm that ranks in the nation's Top 500 Design Firms by ENR Magazine. Are you an entry-level engineering professional or recent graduate with internship experience? This might be a fantastic position for you to advance your passion in the civil and/or environmental space! This is a great opportunity to join a dynamic and highly collaborative team. CPH has an opening in our Ft. Myers, Florida office location for the following position: * Project Engineer (EIT/EI) - Civil/Environmental What You'll Do: * -Primary Duties-- * Preparation of design plans, specifications, and reports for a variety of water/wastewater and stormwater projects which may include transmission, distribution, collection, treatment, storage, utility master planning, permitting and various engineering tasks. * Hydraulic modeling including stormwater pre/post and advanced treatment and storage design along with water and sewer pumping systems and hydraulic water distribution modeling. * Ability to successfully interact with various public and private clients and other jurisdictional agencies. * Performing assignments requiring application of standard techniques, procedures and criteria to carry out engineering tasks. Assignments are designed to further develop judgment and understanding of professional and ethical responsibilities. * Review of design plans and comparison to accepted municipal standards and details. * Preparing engineering related calculations and develop drawings and visual aids. * Working on a wide range of projects and tasks and assist with field research, data collection, data analysis, graphics, maps and data presentation, and report development. * Management of time and workload to stay on schedule and within budget. * Limited travel to assist with site investigations, construction observation and project transmittals. What You'll Need: * -Requirements-- * Bachelors or Master's Degree in Civil Engineering or Environmental focus. * E.I Certificate preferred or eligible and scheduled for FE exam. * Detail-oriented individual with strong technical and organizational skills * Proficiency in spreadsheets, word processing and standard office software. * Works well in multidisciplinary team environments and ability to meet deadlines. * Strong oral presentation and written communication skills. * Experience with AutoCAD, Civil3D, WaterCAD, ICPR and other modeling software is preferred. * Valid state-issued driver's license with a clean driving record. What We Offer: * -Compensation & Benefits-- * Dependent upon experience. * CPH offers Medical, Dental and Vision and Long-Term Disability with a quality insurance company. * Company Paid Life Insurance and Short-Term Disability. * 401K, Paid Personal Time Off, Paid Holidays, and Paid Parental Leave. CPH is an Equal Opportunity/Affirmative Action/Drug Free Work Environment Employer.

A Day in the Life: The IAM Senior Engineer will be responsible for the service design, build, deploy and support key elements of Hertz Privileged Access Management (PAM) platform built leveraging CyberArk Cloud PAM solution supporting infrastructure, servers, services and privilege accounts that are part of the overall Hertz IT ecosystem. It is incumbent upon the IAM Senior Engineer to ensure uniformity of services, adherence to standards, and consistency of infrastructure delivery. The Senior Engineer works with external partners to deliver quality services to Internal and External Customers. The CyberArk Sr. Engineer will collaborate with various teams to ensure the seamless integration and effective use of CyberArk for managing privileged access, monitoring, and securing sensitive accounts. The starting salary is $135K; commensurate with experience. What You'll Do: Follow the deployment processes, which includes Build and Transition of all new initiatives, and includes phase gates reviews for key stakeholders Maintains an understanding of all current and emerging PAM technologies, open system standards, management technologies as they relate to the support of Hertz infrastructure Identifies and assumes an ownership role of PAM Infrastructure, project delivery and security management Manage and secure privileged accounts, monitoring access and usage in compliance with security policies. Conduct testing and resolve issues with CyberArk in a dev environment. Provide leadership and act as a senior level mentor and provide support to technical personnel for any/all issues regarding service design, implementation, education and support of Identity and Access Management infrastructure and availability Gathers project/application requirements from customers and stakeholders Help define support requirements and management infrastructure Ensures that third party solutions follow all Hertz standards Provides senior management and general staff with accurate and complete status information Sponsors, orchestrates, and implements technology pilots to evaluate emerging technologies and their applicability in support of Hertz business requirements and strategic goals. Adheres to all current Change and Problem management policies and procedures Additional responsibilities include participation in global 7x24 support model, planning and organization of projects, tasks, and support initiatives as assigned Manage privileged accounts for applications as well - i.e., database administrators, web/application server administrators, and application administrators. Develop onboarding automation for end points that has privileged accounts. What We're Looking For Minimum 6 to 8 years of relevant practical experience in Privileged Access Management design, implement and support of large-scale, global environments supporting large and globally diversified infrastructure privileged access requirements. Deep hands-on experience with CyberArk Cloud PAM and any other PAM solutions such as Beyond Trust. Experience in Identity Security and working knowledge of tools currently available to support Identity security Experience implementing audit, logging, and monitoring policies Experience in MFA, RBA, SSO, Certificate management for CyberArk environment Deep understanding and implementation knowledge in fraud prevention and identity verification algorithms Experience with implementing and supporting Public Key Infrastructures including Certificate Lifecycle Management and external PKI providers Experience with implementing role-based access in the PAM environment Strong scripting skills in Java and Powershell is essential for this role Strong experience working in CI/CD automation leveraging Ansible or CHEF tools. Strong working experience in Agile methodology. What You'll Get: Up to 40% off any standard Hertz Rental Paid Time Off Medical, Dental & Vision plan options Retirement programs, including 401(k) employer matching Paid Parental Leave & Adoption Assistance Employee Assistance Program for employees & family Educational Reimbursement & Discounts Voluntary Insurance Programs - Pet, Legal/Identity Theft, Critical Illness Perks & Discounts -Theme Park Tickets, Gym Discounts & more

LEMOINE, a Great Place to Work-Certified company, is currently seeking a Recovery Project Engineer. The Recovery Project Engineer assists and supports the Project Management staff in the planning and implementation of a project. Enhances customer relationships by providing excellent service. Responsible for assisting the Project Manager with contract administration, procurement, subcontract awards, scheduling and costing, oversight of project quality and safety, compliance, and customer service, all in an effort to minimize risk and to keep the focus on LEMOINE's Foundations for Successful Execution Job Responsibilities: * Manage and maintain project documentation to ensure compliance with program standards and requirements. * Efficiently process and track change orders through the project management system to support project adjustments. * Review and verify scopes of work to ensure accuracy and alignment with project objectives. * Verify internal systems data is updated promptly and accurately to maintain project integrity and transparency. * Assist in generating and compiling reports to provide insights into project progress, budgets, and timelines. * Monitor and verify adherence to quality standards and project specifications during construction phases. Required Qualifications: * Bachelor's Degree from an accredited university in Construction Management, Engineering, or a related field, or equivalent work experience. * Internship experience in the commercial construction industry preferred. * General knowledge of construction management, project planning, scheduling, and estimating for multiple trade disciplines. * Proficiency in Microsoft Office Suite. * Strong math, organizational, written, and verbal communication skills. Physical Requirements: The physical and mental demands of this position must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to sit, stand, walk, use hands to finger, handle, or feel, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl. The employee must be able to occasionally lift and/or move up to 50 pounds.. Section 3: This position is a Section 3 eligible job opportunity under the Housing and Urban Development Act of 1968. Section 3 residents are encouraged to apply. The purpose of Section 3 of the HUD Act of 1968 is to ensure that preference for employment opportunities generated from the expenditure of HUD funds is directed to local low and very low-income persons, particularly those who receive federal housing assistance. All qualified applicants will be considered but may not necessarily receive an interview. Due to the large volume of submissions received by this office, information concerning application and/or interview status cannot be provided. Selected applicants will be contacted for next steps in the interview process. Applicants who are not selected may not receive notification. This position is subject to close at any time once a satisfactory applicant pool has been identified. Equal Opportunity Employer The Lemoine Company, L.L.C. is an Equal Opportunity Employer. All applications are considered without regard to race, color, sex, age, religion, national origin, or disability. Only job-related factors will be considered in deciding applicants' qualifications for positions.

General Description The City of North Port strives to be an employer of choice and most of our employees turn jobs into long term careers. The salary shown in the is the full range for this position from entry to later career. NEW EMPLOYEES ARE HIRED AT, OR NEAR THE ENTRY POINT SHOWN, DEPENDING ON QUALIFICATIONS AND RELEVANT EXPERIENCE. GENERAL DESCRIPTION: Responsible professional administrative and technical position providing high level engineering and management support to the Utilities Engineering Division Manager and Assistant Director in administrative and engineering aspects of the Utilities Department, including asset management. The Utilities Engineer may have direct or indirect supervision responsibilities. Position reports to Utilities Engineering Division Manager. Essential Job Functions * Provides support to the Utilities Engineering Division Manager and the Assistant Director in the development and management of the engineering and construction of the City's utility systems. * Organizes, manages, directs and performs the planning, budgeting, engineering, design, permitting, construction, and related functions for capital and non-capital projects for the utilities Department. * Evaluates and makes engineering recommendations for specific system expansion projects, process control changes and general system improvements with emphasis on longevity and cost effectiveness. * Manages the engineering support for the asset management program for water, wastewater, and reclaimed water infrastructure, including both linear and vertical assets in the city's utility system. * Leads risk, criticality, and condition assessment programs to plan for repair and replacement of infrastructure. * Provides engineering advise for establishing and managing Asset Management Plans (AMPs) for the City's assets. * Collaborate with teams that support asset management, including but not limited to various operations and maintenance departments and programs. * Serve as an internal technical resource to the asset management program team. * Participate in the preparation of the Department's budget and capital improvement programs. * Develops capital improvement plan to implement system improvements with consideration for cost-control and cost-reduction methods. * Oversees the preparation of all bid specifications, documentation and permits for all construction and capital improvements, including the preparation of the Request for Bids (RFB) and calculation of liquidated damages. * Construction administration and management for capital improvement projects. * Conduct field meetings and inspections of utility construction, as needed. * Coordinating with regulatory agencies for project approvals during design and compliance during construction. * Provides engineering recommendations for the permitting of the water treatment plant and the wastewater treatment plant facilities such as consumptive use permitting and operating permits. * Represents the department in Staff Development Review meetings and reviewing of all plans of developers, as needed. * Supervises. assigns, and schedules work assignments to direct and indirect reports in the engineering division. * Manages the work of consulting engineers. Prepares Requests for Letters of Interest (RLI), review of Letters of Interest (LOI), and evaluation and ranking of consultants in the NPU engineering library for projects related to Capital improvements. Prepares Request for Proposals (RFP) for selection of consulting firms for design projects and studies. * Meets with developers, realtors, builders, etc. to coordinate and explain utility requirements and standards regarding future developments within the City. * Makes recommendations to the Utilities Engineering Division Manager for engineering and contract services. * Contributes to the creation of departmental presentations and may present for Commission meetings, other formal conferences, regulatory agencies, etc. * Coordinates with and attends meetings with FDOT on their programs that are within the City limits. * Responsible for preparing and NPU approving permits in FDOT rights of way. * Preparation of a monthly status report, attendance, and participation in monthly coordination meetings at Sarasota County with all local utility partners (TECO, Sarasota County, Sunshine 811, Frontier, FDOT, etc.) * Assists in the preparation and supervision of emergency operations and development of procedures to ensure the safe operation of the water/wastewater systems, to include meeting all OSHA requirements. * Assists in establishing and maintaining Standard Operating Procedures. * Responsible for updating Standard Specifications and Standard Details utilizing AutoCAD on an as needed basis. * Assists the Utilities Engineering Division Manager in the creation and review of City ordinances, resolutions, reports and presentations. * Directs the Engineering Department in the absence of the Utilities Engineering Division Manager. (These essential job functions are not to be construed as a complete statement of all duties performed. Employees will be required to perform other job related marginal duties as required.) Knowledge/Skills/Abilities * Knowledge of utility engineering and construction practices and water and wastewater utilities procedures. * Knowledge of rules and regulations regarding utilities programs. * Knowledge of rules and regulations with particular reference to federal and state utility regulations. * Knowledge of civil/environmental engineering practices as it relates to water and wastewater construction and operations. * Knowledge and practice of project and construction management. * Skilled in the use of small office equipment, including copy machines or multi-line telephone systems. * Ability to apply mathematics to engineering work. * Ability to organize and communicate effectively and be an organized team player. * Ability to prepare complex reports and statements. * Ability to prepare specifications and permitting for water and wastewater projects. * Ability to create public presentations and present in a professional setting. * Ability to analyze work methods and procedures. * Ability to communicate, interpret and explain ordinances, policies, etc. to the public. * Ability to express ideas effectively orally and in writing. * Ability to work in a team environment and to establish and maintain effective working relationships with employees and the public. * Ability to plan, schedule, coordinate and review the work of subordinates in a manner conductive to full performance and high morale. * Ability to utilize computer hardware and software effectively (Word, PowerPoint, Excel, AutoCAD, Smartsheet or other Project Management Software). Education, Experience, Licenses and Certifications Education and Experience: * Bachelor of Science Degree in Civil/Environmental Engineering, or related field is required. * Master's degree is preferred. * Ten (10) years of work experience in civil/environmental/water/wastewater engineering. (A comparable amount of relevant training, education and/or experience may be substituted for the above qualifications.) Licenses and Certifications: * Must possess a valid Florida Driver's License. * Licensed Professional Engineer in the State of Florida or ability to obtain within six (6) months Emergency Response Responsibility Every City employee has emergency response responsibilities, though not every position will require routine assignments during an emergency event. All employees are subject to recall around the clock for emergency response operations, which may require irregular work hours, work at locations other than the normal work location, and may include duties other than those specified in the employee's official job description. Assignments in support of emergency operations may be extensive in nature, with little advance notice, and may require employees to relocate to emergency sites with physically and operationally challenging conditions. Hiring Range Statement Please note, the hiring pay range for this position isthe minimum up to a rate equal to or less than the midpoint of the salary range. Vets Preference Statement The City of North Port, FL is an Affirmative Action/ADA/Veterans' Preference and Equal Opportunity Employer. Women, Minorities, and Persons with Disabilities are Encouraged to Apply.

SOCOTEC Consulting, Inc. is a leading engineering/architectural consulting firm providing specialty services for high-profile buildings. Our team supports SOCOTEC's specialized building envelope, forensic, sustainability, energy efficiency, code advisory and commissioning groups. SOCOTEC offers competitive salary and benefits, mentorship, training, and social activities. SOCOTEC is proud to announce that it has been officially certified as a Great Place to Work by the renowned global authority on workplace culture, Great Place to Work . Job Description The Senior Engineer will be responsible for managing and executing consulting projects across a wide range of engineering disciplines. This role requires expertise in building envelope, structural integrity and property assessment. The Senior Engineer will collaborate with property stakeholders, legal professionals, and contractors, and serve as a technical leader on multi-disciplinary projects. Key responsibilities include conducting inspections, developing reports, providing expert consultation, and overseeing project execution from evaluation through remediation. Structural inspections, reserve studies, water intrusion investigations, property turnover surveys, concrete restoration, painting and waterproofing programs, property condition assessments, asphalt pavement evaluations, drainage, erosion and ground settlement studies, roof consulting and design, and envelope consulting, milestone inspections and reporting, full-scope project management. The role supports the Regional Director in areas such as financial oversight, budgeting, and manpower planning, leveraging deep expertise in architectural design and construction practices. This position offers a competitive relocation package for those not based in Naples, FL. Qualifications Key Responsibilities: Prepare and review drawings, specifications, cost estimates, project schedules, and other documents to ensure accuracy, code compliance, and readiness for client issuance. Identify complex problems and provide innovative solutions across disciplines. Participate in all project phases, including construction contract preparation, pre-construction conferences, schedule reviews, pay request approvals, change order evaluations, construction issue resolution, final inspections, and closeout procedures. Attend and represent staff at pre-design, pre-bid, and pre-construction meetings. Conduct site visits to assess progress and flag potential issues; resolve problems through design modifications or coordination. Maintain accurate time records daily and ensure work stays within project budgets. Review architectural construction documents for design conflicts, code issues, and constructability. Ensure plans align with project goals, client expectations, and regulatory standards. Evaluate drawing coordination between disciplines (e.g., structural, MEP) and highlight omissions or inconsistencies. Identify and mitigate risks early in the design process to reduce RFIs, change orders, and delays. Recommend improvements to enhance constructability, compliance, or efficiency. Ensure integration of building codes, accessibility standards, and zoning regulations. Provide structured review summaries with professional, constructive feedback. Stay current on industry best practices, materials, systems, and regulatory changes. Mentor team members and support internal training efforts to enhance documentation quality. Assist during construction administration when needed to clarify design intent. Perform all other duties assigned by manager. Requirements: BS Engineering with 10+ years experience and registered PE license Must have experience with managing projects independently and leading a team Must have experience in a minimum of three of the following areas: building envelope, roof consulting, forensic engineering, concrete restoration, commercial waterproofing, capital reserve studies Must have the ability to communicate efficient and affectively orally and written with other staff members and clients. Additional Information SOCOTEC offers a competitive benefits package and an exciting & inclusive company culture where we foster learning and growth through our mentorship program, continuing education support, and other initiatives. For more information, please visit ************** Job Type: Full-Time Your information will be kept confidential according to EEO guidelines. SOCOTEC is an Equal Opportunity Employer.

General Summary & Essential Responsibilities Are you ready to take the next step in your engineering career and make a visible impact in your community? As an Engineer II, you'll play a key role in shaping and maintaining essential County infrastructure. This mid-level position offers the opportunity to apply your technical expertise independently while collaborating with experienced engineers on projects that serve the public good. You'll plan work details, make sound technical decisions, and tackle meaningful engineering challenges, all within a supportive environment that values professional growth, problem-solving, and public service. Min. Education, Licenses and Certifications Education and Experience: An equivalent combination of relevant training, education and experience: * Bachelor's Degree: * Civil Engineering * Environmental Engineering * Three (3) years of experience in civil or environmental engineering. Licenses and/or Certificates: * Must maintain a valid driver's license. * Preferred: * Professional Engineer (P.E.) license. Knowledge, Skills and Abilities An Engineer II for Charlotte County Utilities is a key contributor to the planning, design, and construction of essential water, wastewater, and utility infrastructure that keeps our community running. This role involves reviewing and approving utility plans and permits, interpreting as-built drawings and technical reports, and preparing bid packages and construction documents. You will ensure all work meets County and industry standards. Serving as a trusted technical resource, you will provide technical guidance to contractors, vendors, and customers while delivering responsive problem-solving and exceptional service to support safe, reliable utility operations countywide. Supplemental Information PHYSICAL DEMANDS Walking, sitting, hearing, seeing up close, talking, standing, finger movement, repetitive motions, depth perception. WORK ENVIRONMENT Work is performed in a relatively safe, and secure work environment. RISK/SAFETY CONDITIONS The position requires no exposure or risk related to physical and/or mental health and safety. To perform this job successfully, an individual must be able to perform the essential job functions satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the primary job functions herein described. Since every duty associated with this position may not be described herein, employees may be required to perform duties not specifically spelled out in the , but which may be reasonably considered to be incidental in the performing of their duties just as though they were actually written out in this job description. Charlotte County is an Affirmative Action/ADA/Veterans' Preference and Equal Opportunity Employer. Women, Minorities, and Persons with Disabilities are Encouraged to Apply.

The Systems Engineer II completes system installation and management, system monitoring and performance tuning, diagnostics and troubleshooting, user support coordination, backup and storage management, data center maintenance, infrastructure upgrades, and other related tasks. Typical duties include but not limited to: * Assists in design, development, support and maintenance of systems infrastructure. * Completes system installation and management, system monitoring and performance tuning, diagnostics and troubleshooting, user support and testing coordination, backup and storage management, data center maintenance, infrastructure upgrades, and other related tasks. * Administers application security and configurations. * Ensures data/media recoverability by implementing a schedule of system backups and database archive operations. * Conducts routine infrastructure and security audits to ensure compliance with established standards, policies, and configuration guidelines. * Monitors and maintains continuity with system licensing and maintenance agreements. * Serves as an escalation point for IT User Support Specialist and Systems Engineer I. * Tracks problems in the work order system. * Maintains records, forms, and standard operating procedures documentation. * Develops new techniques and procedures to enhance university systems infrastructure. * Reviews processes, evaluates results, recommends new processes, and promotes best practices. Additional duties: * Performs other job-related duties as assigned. Additional Job Description Required Qualifications: * This position requires either seven years of directly related full-time experience or, as an alternative, a Bachelor's degree in Computer Science or related field and three years of full-time experience directly related to the job functions. * Professional full-time experience with enterprise systems and applications and current versions of Windows Server and Linux or other enterprise services. * Experience with large enterprise computing environments that include multiple site locations. * Experience with Identity Management, Disaster Recovery procedures and domain administration. Preferred Qualifications: * Five years professional, full-time experience with application system support and implementation in a medium to large computing environment. Knowledge, Skills, & Abilities: * Knowledge of basic networking concepts (e.g. Systems, Protocols, Directory Services). * Knowledge and proficiency with relevant business systems, operating systems, and servers. * Knowledge of and ability to administer local and cloud based applications (SaaS) such as Azure/AWS and/or Office 365. * Skill in shell scripting/automation, project management of small initiatives, and troubleshooting. * Skill in managing servers and storage hardware. * Skill in using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. * Excellent interpersonal skills. * Advanced verbal and written communication skills and the ability to present effectively to small and large groups. * Ability to take initiative to plan, organize, coordinate and perform work in various situations when numerous and competing demands are involved. * Ability to collaborate and work effectively within the community and willingness to contribute to a team effort. * Ability to work independently and follow through on project assignments. * Ability to provide professional customer service and act as a customer advocate Pay Grade 18 FGCU is a State University System of Florida member and an Equal Opportunity and Equal Access employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, or protected veteran status.

GARNEY CONSTRUCTION A Project Engineer position is available in Location. This position will act as the backbone of the project management team and keep the job on track. Great attention to detail and the ability to organize and plan will ensure success in this position. WHAT YOU WILL BE DOING You will assist the project management team with tasks such as negotiating and purchasing materials, maintaining documents, and acting as a point of contact with owners, architects, and engineers. Responsibilities: * Create Submittals and RFI's. * Coordinate projects from start to finish. * Assist with estimating. * Project setup & closeout. * support field operations. * maintain detailed job costs. * Work professionally with owners and engineers. * Assist in scheduling projects and crews. WHAT WE ARE LOOKING FOR The ideal candidate will have a degree in civil engineering, construction management, or another related field and is willing to travel and work the days and hours required to ensure the project's success. This position is perfect for someone seeking entry-level project management experience with an industry leader. LET'S TALK THE PERKS! * Employee Stock Ownership Plan (ESOP) & 401K Retirement Plan. * Health, Dental, Vision, and Life Insurance. * Health Savings Account (HSA) / Flexible Spending Account (FSA). * Long-term Disability, Wellness Program & Employee Assistance Plans. * Holidays and PTO CONTACT US If you are interested in this Project Engineer position in Location then please APPLY NOW. For other opportunities available at Garney Construction go to careers.garney.com. If you have questions about the position or would like more information, please contact RecruiterName - Recruiter at DirectLine or by email. Garney Construction and its subsidiaries are committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Garney Construction is a background screening, drug-free workplace. Agency Disclaimer: All vendors must have a signed Garney Construction Agreement, authorized by the Executive Team, to receive payment for any placement. Verbal or written commitments made by anyone other than a member of the Executive Team will not be considered binding. Any unsolicited resumes sent to Garney Construction or submitted to employees outside of the Recruiting Team will be deemed the property of Garney Construction. In such cases, Garney Construction will not be obligated to pay any placement fees. THE BENEFITS OF WORKING AT GARNEY Free medical, prescription, dental, and vision plans ($0 premiums) Virtual doctor visits with no co-pay Shares of company stock at no cost starting your first day 401(k) plan with a 3.5% match Student loan resources Weekly paychecks Paid time off 8 paid holidays Health Savings Account (HSA) with a lump sum and matching contributions Free life insurance & disability policy Free access to healthcare coordinators Counseling sessions with mental health professionals at no cost Access to consultations with legal/financial professionals at no cost Free programs assisting with weight loss, maternity health, prescriptions for chronic conditions, and more 50% employee discount in the Garney apparel store BUILDING SUSTAINABLE FUTURES WITH THE WORLD'S MOST PRECIOUS RESOURCES-WATER AND PEOPLE. EEO - it's the law poster Right to work This organization participates in E-verify Nearest Major Market: Sarasota Nearest Secondary Market: Tampa

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Travel: Up to 25% Number of Openings: 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. Summary The Project Engineer supports field activities and spends a majority of time working with the Project Manager supporting project administration on multiple small projects, or one medium to large-size projects. Activities include managing the job transition process; and supporting the management of cost and schedule, constructability, technical evaluations, quality, safety, work planning, procurement, contract management, regulatory compliance, etc. Roles and Responsibilities The Project Engineer will possess competency in the following areas in order to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. * Generates and obtains approvals of monthly billing and earned values * Develops and manages the project schedule on small or mid-sized projects * Analyzes targets and goals, job cost summaries, and other reports * Alerts the Superintendent and Project Manager of project impact relating to resource management, crew make-up/size, etc. * Generates and obtains approval of the initial budget and subsequent updates, and reviews weekly job cost summaries and advises the Project Manager * Generates estimates of change orders and may interface with pre-construction on original bids * Collaborates with pre-construction and the project team to manage the job transition process, communicate project requirements, and develop the initial procurement plans, budgets, etc. * Generates material quantity take-offs, scoping documents, terms and conditions, delivery, etc. as applicable to support the procurement process * Generates requests for proposal(s), solicits and reviews quotations, and recommends a procurement decision to Project Manager * Prepares field purchase orders for standard purchase packages, and generates and obtains approval of Major Purchase Orders * Gathers and roughs-in monthly financial reports, and participates in the project financial reviews * Works with the Project Manager to approve and code project invoices * Generates and obtains approval of technical records such as constructability reports, RFI's, inspection records, work packages and deviation reports * Coordinates with the Superintendent, Field Project Engineer, and Line and Grade to generate required as-built records * Manages work package closure, punch lists, and project turnover process and approves pre- and post-pour checklists * Collects necessary documentation to identify and determine impact of potential contract changes, disputes, and claims * Leads LEAN/SQP committee and identifies improvement opportunities * Ensures all subcontractors are in compliance with terms of subcontracts, generates, and obtains approval on impact notices as needed * Reviews and confirms reports documenting compliance (Company and subcontractors) with prevailing wage, workforce utilization, MBE/SBE participation, etc., and advises the Project Manager of issues * Interfaces with Safety and Risk Management in establishing clinics, managing first report of injuries, and assisting with co-worker case management * Follows Company Recruitment and Hiring Guidelines * May conduct new-hire orientation and process E-Verify (must be certified) * May coordinate tracking and completion of training requirements with project management Requirements * Bachelor's degree from an accredited college or university and 2 years' of experience or 6 years' of construction related experience and/or training; or equivalent combination of education and experience * Proficiency in Microsoft software programs such as Word, Excel, and PowerPoint The following competencies are needed to successfully perform this job: * Ability to read, analyze, and interpret general business documents, technical procedures, and government regulations * Ability to write reports, business correspondence, and procedures * Ability to communicate well with all levels of workers involved with the project * Ability to apply concepts such as fractions, percentages, ratios, proportions, geometry, and trigonometry to practical situations * Ability to analyze and compute mathematical differences from all stages of drawings from conceptual to final drawings including development of shop drawings Ability to understand Cost Accounting * Basic understanding of construction software such as Primavera, Timberline, Vista and the like * Ability to understand, customize and modify spreadsheets * Ability to direct work and evaluate strengths and weaknesses of co-workers * Ability to work in a team environment * Ability to define problems, collect information, establish facts, and draw valid conclusions * Ability to develop construction schedule via the critical path method * Ability to understand contracts, specifications, drawings, and scope of work * Ability to be proactive in maximizing our return on investment at all time At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR. Nearest Major Market: Fort Myers Nearest Secondary Market: Cape Coral