Operator jobs in Del Aire, CA - 780 jobs

Huntsman is seeking a Production Operator supporting the Advanced Materials Division located in Los Angeles, CA. This position will report to the Production Supervisor. Job Scope Huntsman is currently recruiting for a Production Operator at our chemical manufacturing site in Los Angeles, CA. In this role, you will operate plant equipment and chemical processes safely and efficiently to achieve production output goals. You will gain in-depth knowledge of the production process and its supporting operations and apply that knowledge to maintain efficient and safe production activities. In summary, as the Production Operator, you will: Operate and monitor chemical processing equipment such as vessels, mixers, reactors, and dischargers for the manufacture of epoxy and polyurethane formulations. Safely handle chemicals, adhering to all safety procedures, PPE requirements, and written/verbal instructions in English. Perform processes that include heating, cooling, vacuum, pressure, nitrogen purging, and exothermic reactions. Fill containers, clean equipment and tools, and perform general housekeeping to maintain a safe and organized environment. Operate a forklift and handle drums as part of daily activities. Work independently and collaboratively with other team members to meet production goals. Participate in company-required training and support Environmental, Health, and Safety initiatives. Support continuous improvement initiatives and contribute to Huntsman's operational excellence goals. Qualifications You must possess the following minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. The candidate must have an unrestricted right to work for Huntsman in the United States. Minimum Qualifications High School diploma or equivalent (GED) required. Minimum of 3+ years of related experience in a manufacturing facility, preferably within a chemical formulation plant. Must be cleared by state and federal authorities to work with controlled chemicals utilized at the site. Willingness and ability to work any of the three shifts (1st, 2nd, or 3rd) based on business needs. Skills and Knowledge Strong adherence to safety procedures and attention to detail. Excellent communication skills with the ability to follow precise written and verbal instructions. Demonstrated ability to work effectively both independently and as part of a team. Good problem-solving, time management, and organizational skills. Basic knowledge of mathematics, science, and engineering principles. Computer literacy and ability to interface with production reporting systems. Preferred Qualifications Experience in epoxy or polyurethane manufacturing. Prior forklift certification. Exposure to aerospace, electronics, or tooling industry production environments. Working Environment This role involves working in a chemical manufacturing plant, which requires the use of personal protective equipment (PPE) at all times. The position includes standing, walking, lifting drums, and operating forklifts. Shift work is required, and good housekeeping is essential to ensure a safe and efficient operation. Compensation: Starting rate for Production Operator is $35.00/hr. plus $2.00/hr. shift differential for hours worked from 2:00pm-6:00am. The compensation range reflects the Company's reasonable expectation at the time of posting. We consider a number of business-related factors when making individual compensation decisions including, but not limited to, education, experience and training. Step progression available based on qualification - minimum of 12 months prior to associate qualifying. Huntsman offers outstanding benefits which start from Day One. Competitive healthcare, dental, and vision. One additional week of paid time off - on top of vacation. 401k - Huntsman automatically contributes 6% of eligible pay, regardless of employee contribution. In addition to the 6% non-discretionary contribution, Huntsman will match $1 for every $1 you contribute up to a maximum match of 4% of eligible pay. Huntsman is proud to promote equal opportunity in the workplace All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, national origin, disability, age, or any other protected characteristic. All unsolicited resumes presented by recruitment agencies are treated as pro bono information or service and will not be compensated. Huntsman is aware of scams involving fraudulent job offers. We do not make job offers until after a candidate has submitted a job application and has participated in an interview. Please be advised that any job offer that requires payment or requires you to deposit a check is likely a scam. If you have questions about any open positions at Huntsman or Rubison, please visit our Careers website at ******************************************** Additional Locations:

Purpose of Role The Heavy Equipment Operator will operate one or more types of heavy machinery-including excavators, dozers, backhoes, compactors, articulated dump trucks, and front‑end loaders-as part of earth‑moving activities at an environmental remediation site. Equipment may utilize CAT or John Deere controls. The role also includes performing minor maintenance and basic equipment repairs. Primary Responsibilities Include Operating heavy equipment safely and efficiently with strong skill, coordination, and situational awareness Maintaining continuous attention to detail and safety while operating equipment for extended periods Understanding equipment limitations, including load capacities, to avoid overloading or compromising equipment stability Qualifications 4+ years of experience on civil construction projects 5+ years of experience as a heavy equipment operator Proven ability to operate excavators, bulldozers, backhoes, compactors, articulated dump trucks, and front‑end loaders High school diploma or GED Current 40‑Hour HAZWOPER and 8‑Hour HAZWOPER Refresher certifications Formal training and certification on assigned equipment Ability to read grading plans and interpret cut/fill stakes Willingness to travel to local project sites Strong teamwork skills Ability to adapt to changing site conditions Hourly Pay Rate: $35 - 50+/hr DOE

This position description is subject to change at any time as needed to meet the requirements of the program or company. Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. As a Licensed Heavy Equipment Operator Journeyman, you will be responsible for the safe and efficient operation of heavy machinery used in the construction, excavation, demolition, and installation of systems. Position will be located at Los Angeles SFB. This position is contingent upon successful contract award to V2X. Responsibilities Major Job Activities: + Provides OSP services requiring trenching, loaders, dump trucks, etc. + Performs tasks involving physical labor at installation sites to aid daily operations. + Performs site preparation and implementation activities required to implement approved OSP solution. + Operates hand and power tools of all types, including air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. + Prepares sites; digs trenches; sets braces to support the sides of excavations; erects scaffolding; and cleans up rubble, debris, and other waste materials. + Assists in restoration activities to return site to previous condition before project work. Material & Equipment Directly Used: Proficient with MS Office Suite (Word, Excel, PowerPoint, Visio) and heavy equipment. Working Environment: Outside environment with potential to support austere locations. Physical Activities: Must be able to lift / carry 100 lbs. Qualifications Education / Certifications: + High School diploma Experience / Skills: + 5 Years + Professional operator's license for heavy machinery. Skills & Technology Used: + Various heavy machinery equipment. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.

HEAVY CONSTRUCTION EQUIPMENT OPERATOR Heavy Construction Equipment Operator I Facilities Services Salary Range: $3,736 - $$5,232/Monthly (Budgeted Hiring Salary Range $4,044- $4,833/Monthly) Work Schedule: Full-Time, Monday - Friday, 300 a.m. to 11:30 a.m.; non-exempt classification. Essential Functions: Heavy Construction Equipment Operators operate very heavy trucks, tractor-trucks and heavy construction equipment which can be operated only by a highly skilled operator. Heavy equipment include large track-type tractors (Cat D-6 or larger), large-earth-moving equipment, motor graders, cranes, heisters, large loaders (usually over 1 ½ cubic yard capacity), forklifts (including 2 ½ ton capacity), trenching machines (over 30" depth), large backhoes, large bulldozers, asphalt paving machines, large rollers (eight ton and over) used for improvement of campus roads, parking lots, building site preparation, etc., and operate large tow trucks, tractor semi-trailer combinations such as those used for hauling extremely heavy machinery, equipment, and other materials. Required Qualifications & Experience: Must possess a valid California Driver's license; be licensed appropriately for each vehicle operated and may be required by the California Vehicle Code to carry appropriate certification while driving. Equivalent to one year of heavy equipment operation, including regular or intermittent operation of vehicles, preferably related to heavy construction such as large track-type tractors, large tow trucks, tractor semitrailer combinations, bulldozers, or land planes and involving routine service and minor maintenance of the vehicles operated. Incumbent is required to have knowledge of the rules of safe driving and the provisions of the State of California Vehicle Code pertaining to operation of vehicles described in the classification; knowledge of State and California General Industrial Safety orders related to the assigned tasks of the classification, particularly those related to vehicle and equipment operation, construction methods and practices, and the lifting and moving of heavy loads. Ability to: operate assigned equipment safely; recognize safety hazards and follow practices and laws to insure safety; follow manuals and guidelines pertaining to operation of State vehicles; load and unload vehicles correctly and safely; follow oral and written instructions; read and write at a level appropriate to the duties of the position; establish and maintain cooperative working relationships with other people; service and make routine repairs of equipment operated; and perform manual labor by the duties of the position. Must possess a valid California Driver's license; be licensed appropriately for each vehicle operated and may be required by the California Vehicle Code to carry appropriate certification while driving. The incumbent must have a demonstrated interest and/or ability in working in a multicultural/multiethnic environment. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with the CSU. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who may apply for the position. California State University, Los Angeles, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Desired Qualifications: Bachelor's degree from an accredited four-year college or university in a related field. Experience in a higher education, unionized institution. Work coordination and/or lead responsibilities with notable accountability for the work results of other support staff is preferred. Working knowledge of PeopleSoft. Closing Date: Review of applications will begin on November 6, 2025, and will continue until the position is filled; however, the position may close when an adequate number of qualified applications are received. A COMPLETED ON-LINE CAL STATE LA EMPLOYMENT APPLICATION IS REQUIRED. RESUMES WILL NOT BE ACCEPTED IN LIEU OF A COMPLETED APPLICATION. Please upload a copy of your valid CA Driver's license to the application. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 revised July 21, 2017, as a condition of employment. In addition to meeting fully its obligations under federal and state law, California State University, Los Angeles is committed to creating a community in which a diverse population can live and work in an atmosphere of tolerance, civility and respect for the rights and sensibilities of each individual. To that end, all qualified individuals will receive equal consideration without regard to economic status, race, ethnicity, color, religion, disability, national origin or cultural background, political views, sex or sexual orientation, gender, or other personal characteristics or beliefs. Candidates must demonstrate ability and/or interest in working in a multicultural/multiethnic environment. Certain positions require fingerprinting. The University actively encourages qualified minorities, women and persons with a disability to apply. Upon request, reasonable accommodation will be provided to individuals with protected disabilities to (a) complete the employment process and (b) perform essential job functions when this does not cause an undue hardship. We are an Equal Opportunity/Title IX Employer. To obtain employment information for the impaired call: TDD Line (323) 343-3670 24-hour Dial-A-Job Line (323) 343-3678

We are seeking a highly skilled and experienced Equipment Operator to join our team. The ideal candidate will be responsible for operating a variety of heavy equipment and machinery to support the construction, maintenance, and operations of our facilities and projects. This role requires a strong foundation in equipment operation, a keen eye for safety, and a commitment to meeting deadlines and project goals. Duties Excavations/trenching inside closed landfills for landfill gas collections and leachate systems is a plus. Must be flexible and willing to work overtime as needed. * Ensures equipment is in good working order, at all times. * Must possess skill, coordination, and awareness to operate heavy equipment in a safe manner with precision and efficiency. * Able to slope or bench an excavation. * Able to read and understand cut and fill stakes in order to align and position equipment appropriately. * Willingness to operate heavy equipment for long periods with continuous attention to detail and safety. * Observe and follow all applicable safety requirements. * Maintain consistent communication among field crew members by use of hand signals or radio to align and position heavy equipment properly. * Confirm necessary precautions have been taken to ensure no conflicts exist with both above and below-ground utilities. * All other duties as assigned by the Superintendent Skills A positive attitude and willingness to take direction. * Ability to communicate in English * Understanding proper safety procedures and recognizing hazards * Ability to understand Plans as they relate to trenching, excavation, and grading. * Knowledge of U.S.A. marks * Must be a team player and create a positive environment * Must be a self-starter and a go-getter * Ability to check grade and verify elevations using a laser, is a plus. * Ability to lead the day-to-day activities of a small crew, is a plus. * Must be flexible and willing to work overtime as needed, including weekends. License/Certification: * Driver's License (Preferred) Ability to Commute: * Oakland, CA (Required)

HEAVY CONSTRUCTION EQUIPMENT OPERATOR Heavy Construction Equipment Operator I Facilities Services Salary Range: $3,736 - $$5,232/Monthly (Budgeted Hiring Salary Range $4,044- $4,833/Monthly) Work Schedule: Full-Time, Monday - Friday, 300 a.m. to 11:30 a.m.; non-exempt classification. Essential Functions: Heavy Construction Equipment Operators operate very heavy trucks, tractor-trucks and heavy construction equipment which can be operated only by a highly skilled operator. Heavy equipment include large track-type tractors (Cat D-6 or larger), large-earth-moving equipment, motor graders, cranes, heisters, large loaders (usually over 1 ½ cubic yard capacity), forklifts (including 2 ½ ton capacity), trenching machines (over 30" depth), large backhoes, large bulldozers, asphalt paving machines, large rollers (eight ton and over) used for improvement of campus roads, parking lots, building site preparation, etc., and operate large tow trucks, tractor semi-trailer combinations such as those used for hauling extremely heavy machinery, equipment, and other materials. Required Qualifications & Experience: Must possess a valid California Driver's license; be licensed appropriately for each vehicle operated and may be required by the California Vehicle Code to carry appropriate certification while driving. Equivalent to one year of heavy equipment operation, including regular or intermittent operation of vehicles, preferably related to heavy construction such as large track-type tractors, large tow trucks, tractor semitrailer combinations, bulldozers, or land planes and involving routine service and minor maintenance of the vehicles operated. Incumbent is required to have knowledge of the rules of safe driving and the provisions of the State of California Vehicle Code pertaining to operation of vehicles described in the classification; knowledge of State and California General Industrial Safety orders related to the assigned tasks of the classification, particularly those related to vehicle and equipment operation, construction methods and practices, and the lifting and moving of heavy loads. Ability to: operate assigned equipment safely; recognize safety hazards and follow practices and laws to insure safety; follow manuals and guidelines pertaining to operation of State vehicles; load and unload vehicles correctly and safely; follow oral and written instructions; read and write at a level appropriate to the duties of the position; establish and maintain cooperative working relationships with other people; service and make routine repairs of equipment operated; and perform manual labor by the duties of the position. Must possess a valid California Driver's license; be licensed appropriately for each vehicle operated and may be required by the California Vehicle Code to carry appropriate certification while driving. The incumbent must have a demonstrated interest and/or ability in working in a multicultural/multiethnic environment. A background check (including a criminal records check) must be completed satisfactorily before any candidate can be offered a position with the CSU. Failure to satisfactorily complete the background check may affect the application status of applicants or continued employment of current CSU employees who may apply for the position. California State University, Los Angeles, as part of the CSU system, is a State of California Employer. As such, the University requires all employees upon date of hire to reside in the State of California. As of January 1, 2022 the CSU Out-of-State Employment Policy prohibits the hiring of employees to perform CSU-related work outside the state of California. Desired Qualifications: Bachelor's degree from an accredited four-year college or university in a related field. Experience in a higher education, unionized institution. Work coordination and/or lead responsibilities with notable accountability for the work results of other support staff is preferred. Working knowledge of PeopleSoft. Closing Date: Review of applications will begin on November 6, 2025, and will continue until the position is filled; however, the position may close when an adequate number of qualified applications are received. A COMPLETED ON-LINE CAL STATE LA EMPLOYMENT APPLICATION IS REQUIRED. RESUMES WILL NOT BE ACCEPTED IN LIEU OF A COMPLETED APPLICATION. Please upload a copy of your valid CA Driver's license to the application. The person holding this position is considered a "mandated reporter" under the California Child Abuse and Neglect Reporting Act and is required to comply with the requirements set forth in CSU Executive Order 1083 revised July 21, 2017, as a condition of employment. In addition to meeting fully its obligations under federal and state law, California State University, Los Angeles is committed to creating a community in which a diverse population can live and work in an atmosphere of tolerance, civility and respect for the rights and sensibilities of each individual. To that end, all qualified individuals will receive equal consideration without regard to economic status, race, ethnicity, color, religion, disability, national origin or cultural background, political views, sex or sexual orientation, gender, or other personal characteristics or beliefs. Candidates must demonstrate ability and/or interest in working in a multicultural/multiethnic environment. Certain positions require fingerprinting. The University actively encourages qualified minorities, women and persons with a disability to apply. Upon request, reasonable accommodation will be provided to individuals with protected disabilities to (a) complete the employment process and (b) perform essential job functions when this does not cause an undue hardship. We are an Equal Opportunity/Title IX Employer. To obtain employment information for the impaired call: TDD Line ************** 24-hour Dial-A-Job Line **************

The Loader Operator I is responsible for operating heavy equipment and trucks, setting up equipment for auction in yards and helping customers during and after auctions. Experience operating heavy machinery. Able to operate a large 36,000 lbs forklift is an asset. Good spoken and written English is required. Good computer skills and able to learn new programs quickly. A track-record of working safely, and helping others work safely, too. You must be able to relate well with customers and team members. You like to work in a team, helping out wherever needed; but you can also self-start and work on your own. Organized, and can handle lots of multiple tasks at once. A high level of attention to detail. Responsible for operating all types of heavy equipment and trucks. Accountable for helping to set up equipment in the yard for auctions. Help customers load their equipment purchases, and answer their questions related to the yard. Actively support the RB Unreserved Commitment to Safety: to send everyone home, every day, the way they came to work, by taking personal responsibility for your safety and safety of your team, co-workers and customers. Perform other duties as assigned.

Since 1996, Boudreau Pipeline Corporation continues to be Southern California's premier pipeline company that provides quality solutions and installations for wet utilities including sewer, water, storm drain systems and fire lines. We specialize in both conventional and highly complex pipeline projects for leading commercial, industrial and residential builders, municipalities, utilities and contractors. As a proud partner with the Laborers' Union, we continue to provide the best support to our team of employees, their families and our community. Surveyed as a Top Workplace for the 8th year in a row by our Employees, we continue to provide superior on-the-job training, career advancement, safety and a dynamic company culture while practicing our Guiding Principles; Mutual Respect, Accountability and Responsibility. Come join our family, We Dig Your Future!™ Currently offering sign-on bonuses for qualified candidates! **Must have WET UTILITIES experience (dry utilities, oil, & gas will not be considered)** Responsibilities Operates heavy equipment of various sizes and weights used in road, site or highway construction and paving Operates heavy equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life Performs daily safety and maintenance checks Cleans heavy equipment as scheduled and/or required Maintains the equipment and advise supervisor of any requirement for maintenance or repairs Maneuver heavy equipment into loading or unloading positions, following signals from loading crew as needed; check that the vehicle position is correct and any special loading equipment is properly positioned. Ensure a sound understanding of the issues involving ground disturbance Uses equipment as appropriate to level roads and/or working area, ensure proper drainage, and develop proper grade. Use various pieces of equipment to perform fine grading and finishing, sloping and banking, backfilling, demolition, ditching, loading, excavating and stockpiling. Uses equipment as appropriate to level roads and/or working area, ensure proper drainage, and develop proper grade Ensures a safe work environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task Properly follows all company policies and OSHA/MSHA regulations for safe working procedures and environment Reports any problems to your immediate supervisor Signals operators of construction equipment to facilitate alignment, movement, and materials with shovel Follows direction of Foreman as to daily tasks and expectations for each specific project or jobsite May be called upon to run small power tools such as jack hammer Digs, spreads, and levels construction materials Lifts, carries and holds material, tools and supplies Maintains regular and predictable attendance at assigned times is required Other duties as assigned Safety Responsible for ensuring OSHA standards and company safety policies are complied with at all times including but not limited to operation of tools, equipment and machinery Corrects unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately Qualifications Considerable knowledge of equipment operations and construction and maintenance procedures Must possess a working knowledge of grades and blueprints Skill in operation of assigned equipment Ability to follow verbal and written instructions. Ability to establish effective working relationships with other employees and general public Pay Range: $30.00 - $45.00/hr based on experience. Not ready to apply? Connect with us for general consideration.

Job DescriptionBenefits: 401(k) matching Company parties Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Level 1-3 Machinist - is responsible for setting up and producing machined parts by operating a CNC machine; maintaining quality and safety standards; keeping records; maintaining equipment Role and Responsibilities 1. Setting up and Running CNC machinery for production runs. 2. Ensure the machine has the proper computer program and necessary tools installed. 3. Position the materials being used on the machine and turn on the power. 4. CNC machine operators monitor machinery for any problems during the production run. If there is an issue, operators may adjust the program to correct the problem or consult with a programmer who fixes the program. After items have been produced, machine operators ensure that they meet specifications and verify their quality per procedure. 5. Must interpret blueprints, manuals, and other work instructions. Understands what non-conforming product is and how to take appropriate actions. 6. CNC operator machinists additionally clean and perform basic preventative maintenance functions on machines, tooling and parts. They must work safely to prevent on-the-job injuries, which includes wearing personal protective equipment such as safety glasses. They also inspect cutting tools for sharpness and usability. 7. Detect malfunctions using precision measuring instruments such as micrometers, dial calipers, depth gages, indicators and scales, according to manufactures spec. Communicate with Shop Foreman and Production scheduler for assignments, and to resolve machining or quality issues as well. Qualifications and Education Requirements 8. Self-Starter 9. Ability to work alone 10. Positive attitude 11. Attention to detail 12. Ability to meet tight deadlines 13. Ability to solve problems independently and must not be afraid to ask for help when needed 14. High School graduate 16. Requires basic shop mathematical skills. 17. Must have strong oral and written communication skills, and be able to follow verbal and written instructions well. 18. Must be open to being exposed to noise, fumes and varying temperatures. 19. Must be able to perform repetitive motions and must have strong finger dexterity. Preferred Skills 20. Ability to adapt to changes in procedures 21. Great note taking 22. Organization and time management 23. Strong Attention to Detail 24. Able to Follow Verbal and Written Instructions

Purpose of Role The Heavy Equipment Operator will operate one or more types of heavy machinery-including excavators, dozers, backhoes, compactors, articulated dump trucks, and front‑end loaders-as part of earth‑moving activities at an environmental remediation site. Equipment may utilize CAT or John Deere controls. The role also includes performing minor maintenance and basic equipment repairs. Primary Responsibilities Include Operating heavy equipment safely and efficiently with strong skill, coordination, and situational awareness Maintaining continuous attention to detail and safety while operating equipment for extended periods Understanding equipment limitations, including load capacities, to avoid overloading or compromising equipment stability

The J.R. Simplot Company is a diverse, privately held global food and agriculture company headquartered in Boise, Idaho. We are a true farm-to-table company with an integrated portfolio including food processing and food brands, phosphate mining, fertilizer manufacturing, farming, ranching and cattle production, and other enterprises related to agriculture. Summary Operates equipment and related implements to accomplish various assigned tasks by performing the following duties. Essential Duties and Responsibilities Operates equipment such as Tractors, bulldozers, loaders, and dump trucks to perform maintenance and/or construction projects and to level and bed livestock pens during winter months; assists in loading and removing manure to keep pens clean. Performs other duties as assigned by supervisors. Performs light maintenance on equipment such as replenishing fuel, checking oil levels, ensures equipment is properly greased and that equipment is serviced in a timely manner by mechanics. Other duties may be assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and/or Experience A minimum of one to three months experience operating equipment is required; further on the job training will be provided. Language Skills Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one situations to employees and managers of the organization. Mathematical Skills Ability to calculate basic mathematical problems. Reasoning Ability Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Requirements Must be a licensed driver of single axle vehicles. Must be comfortable working around livestock. Some experience working around livestock is highly desired. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and reach with hands and arms. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds and frequently lift and/or move more than 100 pounds. Specific vision abilities required by this job include distance vision and depth perception. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts and in outside weather conditions. The employee is frequently exposed to vibration. The employee is occasionally exposed to wet and/or humid conditions and toxic or caustic chemicals. The noise level in the work environment is usually loud. Work may be performed in pens with animals present. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Job Requisition ID: 24496 Travel Required: None Location(s): L&L Feedlot Pasco - Burbank Country: United States Wage range or rate of pay: 20.45/HR The compensation offered to the successful applicant may vary based on factors including experience, skills, education, location, and other job-related reasons. Attractive total rewards package that includes: Medical, dental, vision coverage 401(k) savings plan 10 Paid Holidays Paid Time Off (where applicable) Relocation Assistance Program (where applicable) Education Assistance (where applicable) Benefits details available at simplotbenefits.com **The J.R. Simplot Company is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, religion, national origin, ancestry, age, sex, gender, gender identity, gender expression, genetic information, physical or mental disability, medical condition, sexual orientation, military or veteran status, marital status, or any other protected status.**

Job Description Demo/Grading - Heavy Equipment Operator - Track Loader $30-$42/Hourly+, DOE Benefits, Paid Holidays, Vacation Time, 401K, etc... Full-Time, Non-Exempt, Mon-Fri work Schedule, some Saturdays Since the company's birth, in 1981, Tight Quarters, Inc. has provided quality assistance to the world of demolition, grading, and concrete cutting and breaking for commercial, residential and industrial communities throughout greater Southern California. Requirements: Experience operating excavator with thumb both full-size excavator, mini-excavator, skid steer, Bobcat compact track loaders, and large track loaders like the CAT 953 and 973. Ability to read and understand grading plans. Experience working in demolition of residential and commercial structures. Meet schedules and timelines. Ability to work safely, productively, and efficiently. Experience in demolition. Understand and follow oral and written instructions. Work cooperatively and collaboratively with other team members. Maintain punctual and consistent attendance. Must be able to work overtime when required. Must have hard working attitude. Experience: Heavy equipment operation: 3 years (Required) Grading operator: 2 years (Required) License/Certification: California Driver License (Required) Benefits: 401(k) + matching Health insurance Dental insurance Vision insurance Paid Time Off Holiday Pay WHY WORK AT TIGHT QUARTERS?: Stability - We've been in business for over 40 years! Exceptional Work Culture - We stay true to our Core Values! Training and Development Opportunities! Tight Quarters Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Tight Quarters complies with applicable state and local laws governing nondiscrimination in employment. Job Posted by ApplicantPro

Sets up and operates numerically controlled horizontal lathe to perform machining operations, such as turning, boring, facing, and threading parts, such as castings, forgings, and bar stock: Reads process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirements. Position Responsibilities Include But Are Not Limited To: Inserts beginning point of tape in reading head of control unit. Mounts work piece between centers, in chuck, or to faceplate, manually or using hoist. Selects and installs preset tooling in tool posts, turrets or indexing heads, and automatic-tool-change magazine, in sequence specified on process sheet Depresses buttons, toggles, or sets tape and starts machining operation Observes numerical displays on control panel and compares with data on process sheet to verify dimensional adjustments, feed rates, and speeds of machining cuts Turns dials and switches to override tape control and correct machine performance, applying practical knowledge of lathe operation Inspects first-run piece and spot-checks succeeding pieces for conformance to specifications, using micrometers and precision dial gauges Studies job packet and organizes materials for next run during automatic tape-controlled cycles to shorten changeover time May set tools before positioning them in lathe, using precision gauges and instruments May set up and operate another machine tool during tape-controlled machining cycles May machine nonmetallic materials May be designated by type of lathe operated as Engine Lathe Operator, Turret Lathe Operator, Numerical Controls Regulates machine by setting and adjusting controls Maintain specifications by observing operations and checking for malfunctions while inspecting the parts Observe operation of production run and make adjustments to ensure pieces meet all specifications Document actions by completing production and quality logs Qualifications-Education/Experience Required: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions. Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments Qualifications-To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Language Skills-Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization Mathematical Skills-Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs Reasoning Ability-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations Preferred: 5-7 year's experience as a lathe operator in a machine shop environment, preferably in the aerospace industry

Sets up and operates numerically controlled horizontal lathe to perform machining operations, such as turning, boring, facing, and threading parts, such as castings, forgings, and bar stock: Reads process sheets, blueprints, and sketches of part to determine machining to be done, dimensional specifications, set up, and operating requirements. Position Responsibilities Include But Are Not Limited To: Inserts beginning point of tape in reading head of control unit. Mounts work piece between centers, in chuck, or to faceplate, manually or using hoist. Selects and installs preset tooling in tool posts, turrets or indexing heads, and automatic-tool-change magazine, in sequence specified on process sheet Depresses buttons, toggles, or sets tape and starts machining operation Observes numerical displays on control panel and compares with data on process sheet to verify dimensional adjustments, feed rates, and speeds of machining cuts Turns dials and switches to override tape control and correct machine performance, applying practical knowledge of lathe operation Inspects first-run piece and spot-checks succeeding pieces for conformance to specifications, using micrometers and precision dial gauges Studies job packet and organizes materials for next run during automatic tape-controlled cycles to shorten changeover time May set tools before positioning them in lathe, using precision gauges and instruments May set up and operate another machine tool during tape-controlled machining cycles May machine nonmetallic materials May be designated by type of lathe operated as Engine Lathe Operator, Turret Lathe Operator, Numerical Controls Regulates machine by setting and adjusting controls Maintain specifications by observing operations and checking for malfunctions while inspecting the parts Observe operation of production run and make adjustments to ensure pieces meet all specifications Document actions by completing production and quality logs Qualifications-Education/Experience Required: Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully Oral Communication - Speaks clearly and persuasively in positive or negative situations; Listens and gets clarification; Responds well to questions. Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information Organizational Support - Follows policies and procedures; Completes administrative tasks correctly and on time Judgment - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments Qualifications-To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Language Skills-Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization Mathematical Skills-Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs Reasoning Ability-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations Preferred: 5-7 year's experience as a lathe operator in a machine shop environment, preferably in the aerospace industry

for AI integration work. Not for real hiring. Qualifications .

THE ROLE: Shift Manager * Travel Requirement: None * FLSA Status: Non-Exempt * Employment Category: Full-Time Regular * Pay Range: $22.00 to $26.00/Hr. Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This job contributes to Evolution Fresh success by moving product within a warehouse or distribution center in accordance with production, order and delivery schedules, and other business requirements. Models and acts in accordance with Evolution Fresh guiding principles * Performs a range of shipping, receiving and inventory control duties, including loading and unloading of trailers, replenishing stock, filling orders * Providing inventory services, and completing required documentation of product movement * Ensures quality by continually reviewing work to detect and correct errors * Safely and effectively operates a variety of powered industrial trucks to perform various distribution tasks * Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same * Understands and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) * Supports food safety, legality, and quality programs. * Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures * Monitors and documents quality measures using analytical tools * Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values * Maintains regular and consistent attendance and punctuality WHAT WE'RE LOOKING FOR MINIMUM QUALIFICATIONS: * High School/GED or one to two years' experience in related field or combination of both education and experience ADDITIONAL REQUIRED QUALIFICATIONS: * Ability to communicate clearly and concisely, both verbally and in writing * Attention to detail * Problem-solving skills * Basic math skills * Ability to follow verbal and written direction * Ability to understand written policies and guidelines, specifications, and safety standards * Familiarity with computerized inventory and order selection systems * Knowledge of equipment maintenance * Ability to operate required material handling equipment * Ability to work on elevated equipment * Ability to work in a diverse team environment * Ability to work in accordance with safety, quality and sanitation standards, policies, and procedures * Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: * Distribution/Warehouse experience (1 year) * Experience operating a stand-up powered industrial truck (1 year) * Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI) * Experience with the GFSI certification schemes (i.e. BRC and/or or SQF). PHYSICAL DEMANDS & ENVIRONMENTAL HAZARDS: * O = Occasional (up to 25% of time) * F = Frequent (26%-74% of time) * C = Constant (75% or more of time) HOURS & WORKDAYS: * 2nd Shift - Monday to Friday 1:00pm - 9:30pm; Overtime, Weekends, and Holidays may be mandatory based on business needs. Rotating workday/time off schedules may be mandatory depending on department/business needs as well. WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. * Medical, Dental & Vision * Group Life and AD&D * Voluntary Life and AD&D * Group Short & Long-Term Disability * 401(k) * Paid Time Off * Flexible Spending Accounts * Employee Assistance Program * Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Confidential does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI -RV1 2nd Shift - Monday to Friday 1:00pm - 9:30pm

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 1: 6:00am - 2:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) Responsibilities Operate and monitor assigned machinery and equipment according to established procedures and safety standards. Perform routine maintenance and cleaning of machines to ensure optimal performance. Read and interpret blueprints, work orders, or production schedules to determine job instructions. Inspect parts and finished products for quality and accuracy using measuring tools. Record production data, including output, downtime, and defects. Adjust machine settings as necessary to maintain product specifications and minimize waste. Collaborate with team members and supervisors to meet daily production goals. Report any mechanical issues or safety concerns to maintenance or supervisory staff. Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications High school diploma or GED is a plus; vocational or technical training preferred. Previous experience in a manufacturing or production environment is a plus. Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. Familiarity with machining processes such as cutting, drilling, or grinding. Mechanical aptitude and the ability to troubleshoot minor equipment issues. Basic math and measurement skills. Ability to read and interpret technical documents, blueprints, or schematics. Strong attention to detail and commitment to quality. Ability to work independently and as part of a team in a fast-paced environment. Willingness to work flexible hours or shifts as needed. Work Environment: Regular standing, bending, reaching, and lifting up to 50 lbs. Use of hands and manual dexterity for precise machining and tool work. Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to ‘Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming “the world's most trusted testing partner”. All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

We are seeking a reliable and detail-oriented Machine Operator (2nd shift) to set up, operate, and maintain machinery in a safe and efficient manner. The ideal candidate will be responsible for ensuring equipment runs smoothly, producing high-quality parts or products according to specifications. This role plays a critical part in our production process, requiring attention to detail, mechanical aptitude, and a commitment to safety and productivity. Shift 1: 6:00am - 2:30pm Compensation: $22.00/hour to $24.00/hour (depending on experience) Responsibilities * Operate and monitor assigned machinery and equipment according to established procedures and safety standards. * Perform routine maintenance and cleaning of machines to ensure optimal performance. * Read and interpret blueprints, work orders, or production schedules to determine job instructions. * Inspect parts and finished products for quality and accuracy using measuring tools. * Record production data, including output, downtime, and defects. * Adjust machine settings as necessary to maintain product specifications and minimize waste. * Collaborate with team members and supervisors to meet daily production goals. * Report any mechanical issues or safety concerns to maintenance or supervisory staff. * Follow all company policies, safety procedures, and quality control standards. Skills / Qualifications * High school diploma or GED is a plus; vocational or technical training preferred. * Previous experience in a manufacturing or production environment is a plus. * Experience operating or working with mills (manual or CNC) or other metalworking machinery is highly desirable. * Familiarity with machining processes such as cutting, drilling, or grinding. * Mechanical aptitude and the ability to troubleshoot minor equipment issues. * Basic math and measurement skills. * Ability to read and interpret technical documents, blueprints, or schematics. * Strong attention to detail and commitment to quality. * Ability to work independently and as part of a team in a fast-paced environment. * Willingness to work flexible hours or shifts as needed. Work Environment: * Regular standing, bending, reaching, and lifting up to 50 lbs. * Use of hands and manual dexterity for precise machining and tool work. * Exposure to loud noises, coolant, sharp tools, and metal shavings. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws.

Set up and be able to operate all machines within the machine shop Set up and operate lathes and mills Set up and operate economy pointer Set up and operate slotters Set up and operate air chamber Set up and operate fillet roll Set up and operate traubs Set up and operate dye machine Set up and operate drill press Set up and operate auto pin machine Set up and operate button die and c-sink Set up and operate cut off saw Set up and operate chop off press Be familiar with and able to use dial calipers, mic and SPC computer Qualifications-Education/Experience Required: Qualifications-To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required for this position Education and/or Experience-High school diploma or general education degree (GED), or five years related experience and/or training, or equivalent combination of education and applicable experience Language Skills-Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability tow rite routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization Mathematical Skills-Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Be able to read and interpret blue prints. Reasoning Ability- Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Preferred: Travel Requirements 0%