Operator jobs in Leland, NC

Description Salary based on the depth of construction experience - Salary Range - $55,000 to $75,000 (Compensation Range based on Overtime and Bonus Structure) -Summary/Objective- Excavator Operator -Candidates should have at least 3 years of experience operating excavators (operating weight 20,000 lbs. or more) on pipeline construction projects. Some manual labor may be required. Mainline Excavator Position Responsibilities: - Excavate line and grade for mainline waterline according to project plans - Excavate around existing utilities with precision - Understand and implement trench depth & grade - Understand and implement pothole procedure, pipeline & grade compaction - Knowledge of excavation, trenching & shoring practices - Understand and implement the proper rigging for all materials being lowered into the trench - OSHA Certified competent person for trenching & shoring - Thorough knowledge of equipment maintenance to ensure safe and reliable equipment at all times -This will be a full-time position with some travel required. -All Candidates must be able to meet the following requirements: -Have a valid driver's license with a clean record -Pass a pre-employment drug screen -Display a professional and courteous attitude at all times -Be willing to work nights and weekends when required -Be able to work overtime when required -Be willing to work outdoors in extreme conditions (hot/cold) -Be able to do preventive maintenance on equipment, (grease fittings, check fluid levels, refuel) -Strictly adhere to company Safety requirements and procedures -Have the willingness to work in a team environment Benefits provided: Paid Vacation Paid Holidays 401K Retirement Plan ESOP - Employee Stock Ownership Plan Health/Dental/Life/ and Short Term Disability Insurance -Salary Range: Between $55,000. to $75,000 per year based on experience and abilities Please attach your resume and references in the following application.Type: Full-time Pay: $55,000.00 to $75,000.00 per YEAR

POSITIONS AVAILABLE: 5 PRIMARY FUNCTION: Operate one or several types of power construction equipment including but not limited to motor-graders, bulldozers, rubber tire backhoes or trackhoes, rollers, articulated dump truck drivers, front-end loaders or hydraulic excavators to excavate, move, and grade earth, erect structures, or pour concrete, asphalt, or other hard surface pavement on road beds, parking lots, airport runways and taxiways. May perform minor repairs and maintain equipment in addition to other duties. ESSENTIAL DUTIES: Utilities Division Heavy Equipment Operators 1.) Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment. 2.) Start machine, engage clutch, and push and move levers, switches, and pedals to guide machine along forms or guidelines and to control the operation of machine attachments, such as blades, buckets, scrapers, or swing booms. 3.) Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain. 4.) Operate machines to spread, smooth, level, or steel-reinforce stone, concrete, or asphalt on road beds or other job sites as needed. 5.) Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications. 6.) Observe grade in order to adjust machine settings and indicate low spots for workers to add material. 7.) Conduct documented pre-shift inspections of equipment for safety and mechanical defects. 8.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. 10.) Align machines, cutter heads, or depth gauge makers with reference stakes and guidelines or ground or position equipment, following hand signals of other workers. 11.) Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members. 12.) Inspect, clean, maintain, and repair equipment, using mechanics' hand tools. Conduct pre-shift inspections and report any concerns or malfunctions to supervisors. 13.) Learn and follow safety regulations. 14.) Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects. 15.) Perform necessary work while complying with all company policies and procedures. 16.) Perform additional duties as required or directed by their immediate supervisor or other manager. 17.) Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: * High school diploma or GED * Must be a minimum of 18 years old. Work Experience: * Must be able to operate multiple pieces of equipment. * Must be willing to use hand tools while not operating equipment. * Minimum of 3 years' operating and utility work experience. * Must have a good work ethic and work as a team player; including operating different types of equipment and general labor work if needed. SPECAL QUALIFICATIONS: Experience pulling trench boxes and sloping excavations. Heavy Physical Demands: Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Job Description Operate and monitor chemical processing equipment to ensure optimal performance and safety. Conduct routine inspections of machinery and equipment to identify any issues or maintenance needs. All operators are expected to work as a team and use consensus decision making to achieve departmental goals and objectives. Maintain accurate records of production data, including batch numbers, quantities, and quality control measures. Collaborate with team members to implement lean manufacturing practices for improved efficiency. Read and act upon daily area operating instructions. Provide feedback to supervision on operational issues, related to process conditions, improvement ideas, operational instructions, etc. Provide shift change relief. Conduct hourly (minimal requirement) tours of manufacturing area to ensure good operating condition of all equipment. Identify and resolve mechanical and/or process-related issues. Check levels, temperatures, pressures etc. Communicate findings to supervision. Collect and analyze process samples. Record results on prescribed schedule. Work regularly assigned shifts and provide a fair and equitable amount of overtime for co-worker absences, illnesses, vacations, holidays, etc. Assist in materials handling, including the safe transport of chemicals within the facility. Adhere to all safety protocols and SOP guidelines to maintain a safe working environment. Participate in training programs to enhance skills related to machining, fabrication, and forklift operation. Qualifications: High school diploma or equivalent required Process Technology degree or certification Ability to read, write, and speak English fluently 2-3 years' experience working with machinery, mechanical, and chemical processes No fear of heights or confined spaces Experience with materials handling techniques and safety practices. Proficient computer skills, the ability to use process control software and enter data Ability to perform mathematical calculations Ability to complete Hazmat training Strong problem-solving skills and the ability to troubleshoot equipment issues effectively. Commitment to maintaining high standards of safety and quality throughout all operations. Possess a valid driver's license Must have clarity of vision at 20 feet or more and at 20 inches or less. Able to judge distances and space relationships. Peripheral vision is needed while eyes are fixed. Eye adjustment is used in doing near point work. Able to identify and distinguish colors. Express ideas by spoken word, as well as perceive the nature of sounds. Must be able to speak and hear other plant employees, vendors, customers, etc. Preferred Qualifications: Associate degree in chemistry or related field Lean manufacturing experience boiler experience Certified forklift operator 3-5 years' experience as a process/chemical operator Pipefitting experience Experience in instrumentation & industrial electrical components Environmental Conditions: Job duties occur both inside and outside. There is exposure to extreme temperatures, moisture, humidity, and loud noises Gases, dust, odors, fumes, and mists associated with normal chemical plant operation may be present In production areas employees must wear company supplied protective equipment such as hard hat, safety glasses, respirator, gloves, slickers, and boots Must be able to climb stairs, bend, stoop, walk, twist, grasp, pull, push, reach overhead, and lift up to 50 pounds Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Parental leave Safety equipment provided Vision insurance Join us as we strive for to maintain a safe, efficient, and welcoming environment for all! 12 hour rotating shifts Overtime as needed Call in as needed

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Shop / Equipment Operator in our Wilmington, NC office. The Shop / Equipment Operator will be responsible for: Completing work as assigned by the shop supervisor. Assisting in running shop machinery and equipment (i.e., CNC laser, waterjet, press brakes, shears, milling machines, lathes, etc.) Providing technical assistance (i.e., interpretation of drawings) as needed. Assuming adherence to safety policies and procedures. Ensuring compliance with project procedures, safety program requirements, work rules, etc. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 75+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Mechanically Minded Familiar with piping systems. Familiar with hand and power tools. Welding experience. Experience with press brakes and shears. Experience with waterjet, laser, and plasma machines. Ability to read drawings/sketches and blueprints. Valid Driver's License and a clean driving record. Excellent communication skills and commitment to safety. Additional Skills HS Diploma or Equivalent (Preferred) Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

GARNEY CONSTRUCTION A Heavy Equipment Operator position in Leland, NC is available at Garney Construction. To be considered for this position you must have previous construction experience. As an operator, you will operate machinery to perform activities such as excavating, backfilling, trenching, ditching, clearing, looming, fine grading, and final clean up. The heavy equipment operator may perform functions of a laborer as required. WHAT YOU WILL BE DOING Operate heavy equipment safely as part of a crew. Perform Operator-level maintenance on the machine. Understand safe working loads and signals. Must be willing to work overtime as required. WHAT WE ARE LOOKING FOR 3 years of construction experience. Firm knowledge of equipment operations and maintenance. Must be willing to work overtime as required. Willing to travel. LET'S TALK THE PERKS! Employee Stock Ownership Plan (ESOP) 401K Retirement plan Health, dental, and life insurance Bonus program Paid holidays Paid time off Flexible Spending Account (FSA) or Health Savings Account (HSA) Long-term disability CONTACT US If you are interested in this Heavy Equipment Operator position in Leland, NC then please APPLY NOW. For other opportunities available at Garney Construction go to careers.garney.com.

Job DescriptionBenefits: 401(k) matching Bonus based on performance Health insurance Paid time off Training & development Concrete Cutting Operator: Responsible for operating specialized machinery to precisely cut and remove sections of concrete according to project specifications. Safely and efficiently use tools such as saws and drills to create openings for various purposes, including utility installations and building modifications. Adheres to safety protocols, maintains equipment, and collaborates with construction teams to ensure accurate and timely completion of projects. Responsibilities: Perform various concrete cutting and demolition services including flat sawing, wall sawing, core drilling, and wire sawing. Ensure all work is done in a safe and efficient manner, adhering to company safety policies and procedures. Operate and maintain various tools and equipment used for concrete cutting and demolition, including excavators, skid steers and lifts. Communicate with customers to understand their specific needs and provide high-quality services. Ensure job sites are cleaned and debris is removed after each job.

Job Description Caton Construction Group, one of the Caton Companies, corporate offices in Troy, VA, and Cary, NC, is growing! Currently seeking Equipment Operators for our bridge/roadway project in Winston-Salem, NC. THIS JOB POSTING IS FOR OUR PROJECT IN WINSTON-SALEM, NC. STARTING PAY is competitive and based on skills and experience. The heavy equipment operator operates a variety of contractor equipment and properly maintains the equipment on a daily basis. Responsibilities • Works with and assists in moving and grading dirt, digging ditches and trenches, hoisting material, tools, equipment, and any related work with a bulldozer, backhoe, road grader or front-end loader. • Performs routine inspection and preventive maintenance on assigned equipment and refers defects or repairs to the supervisor. • Performs all duties in conformance to appropriate safety and security standards. Supervisory Responsibility This position has no supervisory responsibilities. Position Type and Expected Hours of Work This is a full-time position. Normal days and hours of work are Monday - Friday, 7:00 a.m. - 3:30 p.m. with time provided for lunch, hours may vary. Work may be local or out of town in which case overnight stays are required. This position frequently requires long hours and weekend work. Travel/ Driving Travel is primarily local during the business day, although some out-of-area and overnight travel may be expected. Driver's license is required. Required Education and Experience High school diploma or equivalent. Four years' experience involving the use of medium and heavy equipment. Preferred Education and Experience Valid CDL License. Position Type and Expected Hours of Work This is a full-time position. Normal work hours are Monday through Friday - overtime expected - 7:00 a.m. - 3:30 p.m. , with time provided for lunch, hours may vary. Work may be local or out of town in which case overnight stays are required. Company Benefits • Competitive Compensation Package • Comprehensive Health, Vision and Dental Insurance • FSA Program • 401K Program with 4% company match • 8 Paid Holidays plus personal floating holiday • 80 hours of accrued Paid time Off (PTO) the first year And more… Why you should apply: Excellent working environment Working for a company that cares about your success Working for a growing company Employment is conditional on satisfactorily completing all pre-employment requirements including background and drug screen. Starting wages depend skills and experience. Equal Opportunity Employer - Minorities and females are encouraged to apply.

We are seeking a skilled and detail-oriented Machine Operator to join our steel production team. The ideal candidate will be responsible for operating and maintaining machinery used in the production and processing of steel products. This role requires a focus on quality, safety, and efficiency while ensuring that equipment operates correctly and meets production targets. Key Responsibilities: Machine Operation: Set up, operate, and monitor machinery used in steel production (e.g., rolling mills, cutting machines, lathes, CNC machines). Adjust machine settings to ensure product quality and meet specifications. Load raw materials into the machine and handle finished products safely. Maintenance and Troubleshooting: Perform routine maintenance on machinery to ensure optimal performance. Identify and troubleshoot mechanical or operational issues and coordinate with the maintenance team for complex repairs. Keep records of maintenance activities and machine performance. Quality Control: Inspect finished products to ensure they meet quality standards and specifications. Identify defects or inconsistencies and take corrective actions as needed. Maintain accurate records of production output and quality reports. Safety Compliance: Adhere to all safety protocols and procedures to ensure a safe working environment. Wear appropriate personal protective equipment (PPE) at all times. Report safety hazards, near misses, or incidents to the supervisor promptly. Documentation and Reporting: Maintain detailed logs of production cycles, machine settings, and incidents. Provide daily reports on production output and equipment performance. Collaborate with other departments, such as quality assurance and maintenance. Team Collaboration: Communicate effectively with team members and supervisors to ensure seamless production operations. Participate in training sessions to enhance skills and knowledge. Assist with training new team members as needed. Qualifications: Education: High school diploma or equivalent; technical training or certification in machine operation is preferred. Experience: 2+ years of experience as a machine operator in a steel plant or similar industrial environment. Technical Skills: Proficiency in operating and troubleshooting industrial machinery. Basic understanding of mechanical systems, hydraulics, and pneumatics. Familiarity with CNC programming and operation is a plus. Physical Requirements: Ability to stand, lift, and operate machinery for extended periods; capability to handle materials weighing up to [Insert weight]. Key Competencies: Attention to detail and commitment to quality. Strong problem-solving skills and mechanical aptitude. Ability to work independently and as part of a team. Strong commitment to workplace safety and adherence to protocols. Work Schedule: Monday - Friday 5am to 3:30pm Equal Opportunity Employer Statement: We are an Equal Employment Opportunity (EEO) Employer. We do not discriminate based on race, color, religion, gender, gender identity, sexual orientation, age, national origin, disability, veteran status, or any other protected characteristic. We are committed to creating an inclusive environment for all employees.

At Atomic Transportation, we take pride in being a leading local bulk hauling company with a dedicated fleet of company-owned assets and W2 driver employees that specialize in waste transportation from local transfer stations to landfills. With over nineteen terminals operating locally throughout the Southeast and Midwest, at Atomic Transportation our commitment to professionalism and dedication to safety are at the core of everything we do. If you are looking for a team to grow with, Atomic Transport is hiring in the Hampstead, NC area! we are seeking a candidate that has experience operating an excavator and a backhoe equipment. What We Can Offer: Pay starting at: $20-$24 an hour based on experience. Weekly Pay! Consistent Schedule. Paid Holidays, Vacation and orientation. Schedule: Monday- Friday Every Other Saturday Benefits: Health, vision, and dental insurance. Voluntary Group Policies: life insurance short/long-term disability. 401(k) Retirement Plan. Must pass a pre-employment drug screen. Must pass a pre-employment background check. Must have a minimum of 2-3 years experience operating heavy equipment. Please Call Billy Waters for more information:************

Contribute to leading-edge security and resilience efforts, advancing protective strategies and propelling continuous improvement. As an Assessments & Exercises Vice President in the Cybersecurity and Technology Controls line of business, you will contribute significantly to enhancing the firm's cybersecurity or resiliency posture by using industry-standard assessment methodologies and techniques to proactively identify risks and vulnerabilities in people, processes, and technology. Design and deploy risk-driven tests and simulations (or manage a highly skilled team that does) and inform analysis to clearly outline root-causes. In this role, you will evaluate preventative controls, incident response processes, and detection capabilities, and advise cross-functional teams on security strategy and risk management. JPMC's Assurance Operations organization is looking to expand its Cybersecurity Red Team with an experienced Business Process Red Team Operator specialized in social engineering and assessments of critical business processes such as payment operations, fraud, and supplier management. The primary focus of this role will be to perform and manage hands-on offensive security activities leveraging social engineering skillsets as part of Red Team engagements against critical JPMC assets. The successful candidate will have a proven track record in cybersecurity assessments, to include social engineering operations like phishing and vishing, and will be able to demonstrate a general knowledge of computer networking fundamentals, modern threats and vulnerabilities, attack methodologies, and penetration testing tools. The Cybersecurity Red Team consists of highly skilled and qualified members who conduct advanced adversary emulation operations to replicate cybersecurity threats targeting the firm. This position is anticipated to require the use of one or more High Risk Role (HRR) systems, which mandates successful completion of enhanced screening, including criminal and credit background checks, before starting employment and annually thereafter. Job responsibilities Perform and manage hands-on offensive security activities leveraging social engineering skillsets as part of Red Team engagements against critical JPMC assets Conduct business process assessments to include tabletop or workshop sessions, live testing of business process controls by technical and social engineering attacks, and preparation of deliverables for senior stakeholders Design and execute testing and simulations - such as penetration tests, technical controls assessments, cyber exercises, or resiliency simulations, and contribute to the development and refinement of assessment methodologies, tools, and frameworks to ensure alignment with the firm's strategy and compliance with regulatory requirements Evaluate controls for effectiveness and impact on operational risk, as well as opportunities to automate control evaluation Collaborate closely with cross-functional teams to develop comprehensive assessment reports - including detailed findings, risk assessments, and remediation recommendations - making data-driven decisions that encourage continuous improvement Utilize threat intelligence and security research to stay informed about emerging threats, vulnerabilities, industry best practices, and regulations. Apply this knowledge to enhance the firm's assessment strategy and risk management. Engage with peers and industry groups that share threat intelligence analytics Required qualifications, capabilities, and skills 5+ years of experience in cybersecurity or resiliency, with demonstrated exceptional organizational skills to plan, design, and coordinate the development of offensive security testing, assessments, or simulation exercises Knowledge of US financial services sector cybersecurity or resiliency organization practices, operations risk management processes, principles, regulations, threats, risks, and incident response methodologies Ability to identify systemic security or resiliency issues as they relate to threats, vulnerabilities, or risks, with a focus on recommendations for enhancements or remediation, and proficiency in multiple security assessment methodologies (e.g., Open Worldwide Application Security Project (OWASP) Top Ten, National Institute of Standards and Technology (NIST) Cybersecurity Framework), offensive testing tools, or resiliency testing equivalents Excellent communication, collaboration, and report writing skills, with the ability to influence and engage stakeholders across various functions and levels Candidate should have the ability to perform targeted, covert security tests with vulnerability identification, exploitation, and post-exploitation activities Strong understanding of the following: Networking fundamentals (all OSI layers, protocols); Windows/ Linux/Unix/Mac operating systems as well as software vulnerability and exploitation techniques; commercial or open-source offensive security tools for reconnaissance, scanning, exploitation, and post-exploitation (e.g. Cobalt Strike, Metasploit, Nmap, Nessus, Burp Suite) Familiarity with AI/ML technologies and tools and operationalizing their use in Red Teaming (e.g., developing video and audio deepfakes, etc.), as well as with system administration skills such as configuration, maintenance, and interpretation of log output from networking devices, operating systems, and infrastructure services and with cloud architecture, operations, and security vulnerabilities Ability to collaborate with high-performing teams and individuals throughout the firm to accomplish common goals Broad experience in multiple businesses or verticals, with organizational and cultural understanding of call centers, payments processes, client service/sales organizations, and operational support staff The ability to articulate and visually present complex technical and fraud subject matter to a wide and senior audience Ability to analyze and produce reports about cybersecurity and fraud vulnerabilities, threats, designs, and procedures Preferred qualifications, capabilities, and skills Social engineering background (or intelligence, law enforcement, or similar experience) Experience in fraud detection and prevention, with a proven track record in identifying, analyzing, and mitigating fraud risks within financial systems or similar environments. Understanding of relevant regulations and compliance requirements related to fraud prevention, such as AML (Anti-Money Laundering) and KYC (Know Your Customer) standards Relevant certifications such as those offered by Offensive Security (OSCP, OSEP), CREST (Certified Simulated Attack Specialist), SANS (GPEN, GWAPT), fraud-specific certifications such as Certified Fraud Examiner or Certified Anti-Money Laundering Specialist (CAMS) Technical knowledge such as: developing in-house scripting; using interpreted languages (such as Ruby, Python, or Perl) and compiled languages (such as C, C++, C#, or Java); understanding security tools or technology such as firewalls, IDS/IPS, web proxies, and DLP Information Security experience in two or more of the following verticals: fraud operations, threat modeling, network/application security testing, social engineering, Red Team operations, and network exploitation operations Ability to support and grow skillsets for Cybersecurity Red Team operations #CTC

Job Description We are seeking a highly motivated and skilled Machine Operator to join our team. As a Machine Operator, you will be responsible for ensuring the smooth and efficient operation of our equipment and machinery. Your primary goal will be to maintain production levels while adhering to strict safety and quality standards. You will work closely with other team members to identify and troubleshoot any issues that arise, and will be expected to communicate effectively with management to ensure that production goals are met. Skills: As a Machine Operator, you will use your technical skills and knowledge to operate and maintain equipment and machinery in a safe and efficient manner. You will also use your problem-solving and communication skills to identify and troubleshoot any issues that arise, and work with team members to resolve them. Additionally, you will use your attention to detail and record-keeping skills to maintain accurate records of production and equipment maintenance. Your ability to work independently and as part of a team will be essential to your success in this role. Finally, your experience with specific types of equipment or machinery, as well as any certifications or experience in a regulated industry, will be highly valued. Minimum Qualifications: High school diploma or equivalent Experience operating and maintaining equipment in a manufacturing or industrial setting Ability to read and interpret technical manuals and schematics Strong problem-solving and communication skills Ability to work independently and as part of a team Preferred Qualifications: Experience with specific types of equipment or machinery Certification in equipment operation or maintenance Experience with lean manufacturing principles Experience with computerized maintenance management systems Responsibilities: Operate and maintain equipment and machinery in a safe and efficient manner Monitor production levels and adjust equipment as necessary to maintain output Identify and troubleshoot equipment issues, and work with team members to resolve them Maintain accurate records of production and equipment maintenance Adhere to all safety and quality standards, and report any issues or concerns to management Benefits: Health, Vision, Dental, Life Insurance AFLAC Boot Allotment Paid Time Off (PTO) Paid Holidays 401K & 401K Company Match Company-provided vehicle During Work Hours Company Paid Holidays Location: Belville, NC

The loader Operator Combi-Lift is to maintain a steady flow of empty coups for the loading crew. Remove the empty coup from the trailer and transport into the chicken house and set down on coup black which is set in place by the loading crew. The operator is required to transport filled coups out of the chicken house and load onto the awaiting trailer. The loader operator must successfully pass the company's Powered Industrial Truck/Operators exam by a minimum score of 80%. A new operator must be trained by a qualified operator and deemed competent by the trainer before being released to work under minimal supervision. All safety rules will be followed, and the operator will follow the Crew Supervisor instructions. Must be a team player and get along with others. Attendance is vital and reliable transportation is a must. Shifts start on Sunday and will run thru Thursday night. Occasionally work on weekends.

The loader Operator Combi-Lift is to maintain a steady flow of empty coups for the loading crew. Remove the empty coup from the trailer and transport into the chicken house and set down on coup black which is set in place by the loading crew. The operator is required to transport filled coups out of the chicken house and load onto the awaiting trailer. The loader operator must successfully pass the company's Powered Industrial Truck/Operators exam by a minimum score of 80%. A new operator must be trained by a qualified operator and deemed competent by the trainer before being released to work under minimal supervision. All safety rules will be followed, and the operator will follow the Crew Supervisor instructions. Must be a team player and get along with others. Attendance is vital and reliable transportation is a must. Shifts start on Sunday and will run thru Thursday night. Occasionally work on weekends.

Job DescriptionSalary: Nuclear Facility Equipment Operator - CLEARED Wilmington, NC | Global Laser Enrichment (GLE) Full-Time | On-Site | Shift Work Required Q-Clearance Required At Global Laser Enrichment (GLE), we are pioneering uranium enrichment technology that will shape the future of clean energy and national security. We are seeking a Nuclear Facility Equipment Operator to support the safe and efficient operation of our enrichment systems. Working under the direction of the Shift Supervisor, you will monitor, control, and operate facility equipment while ensuring compliance with NRC regulations and internal procedures. This role is vital to maintaining plant performance and supporting operational milestones. Why Join GLE? Be part of a mission-critical program with national and global impact. Gain hands-on experience with state-of-the-art enrichment equipment. Contribute to a culture of safety, compliance, and continuous improvement. Competitive compensation, shift differential, and strong benefits package. What Youll Do Operate, monitor, and control UF6 enrichment equipment. Start and stop plant systems as required for operations. Monitor operating parameters and respond to alarms in compliance with facility procedures. Record and analyze operational data, supporting engineering and safety reviews. Perform administrative tasks including shift turnovers, logs, and reporting. Support NRC compliance and conduct-of-operations standards. Respond to facility transients and assist in mitigation efforts. Support equipment maintenance and commissioning activities. Participate in lockout/tagout procedures, corrective action programs, and procedure improvements. Actively engage in initial and continuing training to maintain station qualifications. What Youll Bring Associate degree preferred, high school diploma required. 2+ years of relevant plant experience (nuclear power plant, Navy nuclear propulsion, or similar). An active DOE/NRC Q-Clearance (or an active DOD Top Secret Clearance). Knowledge of nuclear plant systems and health physics procedures. Ability to troubleshoot plant equipment and generate maintenance requests. Strong attention to detail and ability to follow procedures with accuracy. Proficiency in technical documentation, log keeping, and data analysis. Willingness to work off-normal shifts and extended hours as needed. Preferred Background Prior experience as a nuclear operator or equivalent in a highly regulated environment. Demonstrated ability to apply human performance tools in daily operations. Experience supporting commissioning and system modifications in industrial facilities. Important Note Due to the sensitive nature of our work, U.S. Citizenship and eligibility for a DOE/NRC Q-Clearance are required.

Seeking a new challenge where innovative employee contributions are valued? PWT is seeking full-time temp-to-hire Front-End and Back-End Operators for our Wilmington, NC facility! Temp-to-hire positions may lead to full-time employment for candidates who successfully complete training requirements during a 90-day probationary period. Take home your take home pay! We value our employees! PWT's investment in our employees includes: * Proven commitment to safety * 100% Employer-sponsored medical, dental, and vision benefits for employees and dependents * 401k matching and full vestment within one month of hire * Parental leave * Career development and mentorship * Opportunities for advancement * Employee dependent scholarships * Employee wellness programs * Casual work attire * Lively atmosphere! Our Philosophy: PWT's future-oriented philosophy has guided our innovation, product development, and customer care. The best building products come from talented, diverse, enthusiastic people. The PWT team is the best in the business-employees who constantly explore better building solutions, more environmentally sound practices, and a work environment fueled by camaraderie, inclusion, and excitement for new ideas. Team members find a rewarding place to work and have an unwavering commitment to safety. Qualified candidates will excel in their ability to: * Perform all essential duties in a nonclimate-controlled environment * Lift, push, and pull up to 50 lbs. * Stand for long periods of time. * Beginning March 3rd: * Shifts will change to a "3 on/3off" Rotation * Operators work on a 3-day schedule, with 3 days off * Shifts rotate every month 7am-7pm or 7pm-7am We are hiring for the following operator positions: Applicant skills will be assessed, and applicants will be routed to the position best suited to the required knowledge, skills, and abilities. Requests for preferred positions cannot be guaranteed. FORKLIFT EXPERIENCE IS A PLUS! Production Operator, Front: Front-End Operators rotate positions approximately every hour among 3 positions listed below: Lay Up Operator Duties: (Requires: Standing, lifting, bending) * Straighten and guide veneer as it travels down conveyor and hits lay-up stop * Visually inspect quality of veneer * Remove broken sheets of veneer and place on reject cart * Replace broken veneer with quality sheets from staged bundle cart * Ensure quality of layup, veneer quality and billet construction per menu requirements * Operate layup controls * Keep line free of broken veneer * Roll glue on veneer using paint type roller where glue is missing. Feeder Operator: (Requires: Sitting, standing, climbing, bending & lifting sheets of veneer) * Operate feeder controls to ensure steady flow of veneer * Monitor line and veneer as it is fed onto the line. * Verify bins contain proper grade of veneer * Set and maintain LVL line controls * Staple glue card to veneer * Unclog jams in feeder bins * Straighten veneer sheets Lay Up Assistant Operator (Requires: Standing, lifting, bending) * Assist layup operator monitoring line * Unclog jams - Jams may include removing multiple sheets of veneer at the same time. * Sort and stack veneer sheet rejects onto cart * Pull defective sheets of veneer off the line and carry to cart * Remove and replace defective veneer face sheets * Inspect veneer for defects; remove sheets out of spec. * Housekeeping: Use air hose to blow out debris and dust from underline. * Maintain good housekeeping; sweep, dump trash, and use air wand to blow out debris and dust from under line. Sweep floor using push broom. Ability to continuously lift, climb, stoop, reach, stand is essential for all positions. Satisfactory completion of a pre-employment physical is required for all positions. Job duties listed are representative and do not represent the full requirements of the positions. Other duties and abilities are required. Product Operators, Back: Back-end product operators finish the product and prepare for shipping: * Cut the product to customer specifications (measuring skills needed), * Manage the flow of finished and unfinished products (excellent communication skills and teamwork needed), * Inspect the product for defects, reporting any defective products, and ensuring that no defective products are sent to the customer (attention to detail needed), * Move the product using an overhead crane, forklift, side-lift and other heavy machinery (commitment to safety needed), * Ensure the product is properly labeled (attention to detail needed), and * Ensure that all products are carefully and neatly packaged, maintaining a high standard of presentation to create the best possible impression for the customer. Product operators consist of the following positions: * Sawyer: * The Sawyer is responsible for operating cutting equipment, inspecting billets, and ensuring high-quality output while adhering to safety protocols, as well as a variety of other duties. * Ideal candidate will possess the following skills: * An unwavering commitment to following all safety protocols * Ability to coordinate and direct the movement of product from three production lines into one product stream (excellent communication skills and systems thinking are required). * Ability to create and maintain accurate and detailed records (integrity, attention to detail), * Demonstrated physical ability to move billets manually when necessary (ability to lift at least 50 pounds without assistance) * Stacker: * Communicates with the sawyer via hand signals and other communication methods to ensure the safe and efficient flow of materials. Responsible for the safe operation of all machinery, and ensuring all product is properly tagged/labeled, as well as a variety of other duties. * The ideal candidate will possess the following skills: * An unwavering commitment to following all safety protocols * Ability to safely and efficiently operate controls (aptitude for the safe operation of manufacturing equipment) * Excellent communication skills and the ability to manage the flow of materials (systems thinker with a holistic cause-and-effect view of the production process) * Ability to properly tag all inventory with a customer-focused attention to detail * Cut to Length (CTL): * The CTL operator is responsible for the safe operation of the tri-state saw and radial arm saw and accurately cutting boards to length according to stated specifications, while balancing and prioritizing cut-to-length orders with cutting lab samples and other business needs, as well as a variety of other duties. * The ideal candidate will possess the following skills: * An unwavering commitment to following all safety protocols * Ability to work independently and safely operate all required machinery, saws, forklift, and side-lift with situational awareness (forklift and heavy machinery aptitude) * Ability to accurately identify product to be worked (product knowledge, attention to detail) * Ability to prioritize multiple tasks based upon established protocols and changing production needs (systems thinker with a holistic cause-and-effect view of the production process) * Reclaim: * The reclaim operator is responsible for reclaiming defective product, identifying the nature and location of the defect and determining if the rejected board will be cut to length or ripped to a usable size. Ensures effective communication of the defect to relevant team members, as well as the transfer of the billet number and other relevant information from the billet to the defective board for accurate tracking, as well as a variety of other duties. * The ideal candidate will possess the following skills: * An unwavering commitment to following all safety protocols * Ability to accurately identify a variety of defects and understand the best course of treatment to salvage the product, if possible (integrity, product knowledge, attention to detail), * A commitment to following tracking procedures to accurately track inventory through the production and post-production process (integrity, attention to detail), * Excellent communication skills and a teamwork mindset (systems thinker with a holistic cause-and-effect view of the production process) * Packager: * The packager makes certain the customer receives a defect-free, finished product and ensures all products are carefully and neatly packaged, maintaining a high standard of presentation to create the best possible impression for the customer. Safely operates the saw and utilizes exacting measuring skills to cut the product within specifications before wrapping and stapling wrapper for presentation and transport, as well as a variety of other duties. * The ideal candidate will possess the following skills: * An unwavering commitment to following all safety protocols * Ability to accurately measure and cut product to ensure usable end product for the consumer. (attention to detail) * Ability to safely operate the saw, pneumatic staple gun, and performing ongoing housekeeping to maintain a safe work environment. (aptitude for safe operation of tools and manufacturing equipment) * Commitment to sending a defect-free, well-presented product to the customer. (integrity, pride in work) Required PPE: Minimum of hardhat, gloves (type depends on task), safety glasses, above the ankle steel-toed boots, and ear plugs. Additional PPE is required for certain tasks as prescribed in our safety trainings and documentation. We value our employees! PWT's investment in our employees includes: * Proven commitment to safety * 100% Employer-sponsored medical, dental, and vision benefits * 401k matching and full vestment within one month of hire * Parental leave * Career development and mentorship * Opportunities for advancement * Employee dependent scholarships * Employee wellness programs * Casual work attire * Lively atmosphere! Entry level compensation: $18.17 per hour plus shift differential when applicable during the work trial. Pay increases to $21.00 per hour upon hire Temporary personnel are not eligible for benefits and are employees of the contracted personnel agency. Benefits available to eligible PWT employees the month following hire.

SummaryIn this dynamic position, you'll play a critical role in ensuring the quality and precision of advanced aviation components. Combining the responsibilities of a skilled operator and meticulous inspector, you'll perform a variety of tasks that demand technical expertise, attention to detail, and a commitment to excellence. From contouring complex parts to inspecting assemblies with cutting-edge equipment, your work will directly impact the performance of high-tech engines like the LEAP and 9XJob Description Join GE Aerospace: Where Precision Meets Purpose Are you ready to elevate your career and contribute to the future of aviation? At GE Aerospace, we're not just building jet engines and components-we're shaping the technologies that power commercial and military aircraft around the globe. As part of our Wilmington team, you'll be immersed in a collaborative, high-performing environment where your skills and ideas will fuel innovation and excellence. Together, we believe the world works better when it flies. Do you? Working at GE Aerospace Wilmington For over 22 years, our Wilmington facility has been a hub of innovation and excellence, producing high-quality rotating parts for aviation's most advanced engines. With 600,000 square feet of manufacturing space, 300+ CNC machines, and 21 special processes, we're proud to be the career home of 500+ employees who thrive on purpose and challenge. What You'll Do: Operate and Innovate: Perform hand contouring tasks using grinders, polishing tools, and automated equipment. Set up and operate CNC machines and manual machining processes, ensuring tight tolerances and exceptional surface finishes. Inspect and Assure Quality: Utilize electronic gauging equipment, surface plate inspections, and unconventional mechanical devices to verify dimensions and features. Document findings and provide feedback to maintain the highest quality standards. Collaborate and Train: Actively participate in team-based environments, sharing knowledge and training others to uphold inspection techniques and manufacturing excellence. Maintain Standards: Ensure compliance with safety, quality, and ergonomic procedures while keeping workspaces organized and efficient. Why GE Aerospace Wilmington? Competitive Pay: Starting at $33.39/hour, plus $1/hr shift differentials Comprehensive Benefits: Medical, dental, vision, vacation, and holidays starting Day 1. Career Growth: Opportunities to contribute to cutting-edge technologies and receive certifications like CVP and Inspector B. Relocation Support: Available for candidates living over 90 miles from the facility. Requirements Include: High school diploma or equivalent Must have at least 3 years manufacturing experience in set-up and operations of any 2 of the following computer numerically controlled (CNC) or manual machining processes: drilling, milling, grinding, turning, or broaching or 2-year degree from an accredited machinist training program. Must have one year of experience reading and interpreting mechanical blueprints and/or production planning. Must have at least 2 years using precision measuring instruments. Must be able to push, pull or lift parts up to 50 lbs. utilizing proper ergonomic procedures. Desired Qualifications: Prior Aircraft Engines machining experience Must be able to use computers and learn Microsoft Office. Must be able to follow written and verbal instructions and communicate effectively in the English language. Experience working in a high-performing team-based environment. Additional Information: If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

AVAILABLE POSITIONS: 2 PRIMARY FUNCTION: Operate one or several types of power construction equipment including but not limited to motor-graders, bulldozers, rubber tire backhoes or trackhoes, rollers, articulated dump truck drivers, front-end loaders or hydraulic excavators to excavate, move, and grade earth, erect structures, or pour concrete, asphalt, or other hard surface pavement on roadbeds, parking lots, airport runways and taxiways. Will perform minor repairs and maintain equipment in addition to other duties. ESSENTIAL DUTIES: Commercial Heavy Grade 1.) Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment. 2.) Start machine, engage clutch, and push and move levers, switches, and pedals to guide machine along forms or guidelines and to control the operation of machine attachments, such as blades, buckets, scrapers, or swing booms. 3.) Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain. 4.) Operate machinery to spread, smooth, level, stone, concrete, or asphalt on road beds or other job sites as needed. 5.) Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications. 6.) Observe grade in order to adjust machine settings to correct uneven areas such as high or low areas where materials may need to be added or cut. 7.) Conduct documented pre-shift inspections of equipment for safety and mechanical defects in accordance with company TPR standards. 8.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. 9.) Align machines, cutter heads, buckets or depth gauge markers with reference stakes and guidelines or ground or position equipment, following hand signals of other workers. 10.) Coordinate machine actions with other activities or trucks by positioning or moving loads in response to hand or audio signals from crew members. 11.) Inspect, clean, maintain, and repair equipment, using mechanics' hand tools. Conduct pre-shift inspections and report any concerns or malfunctions to supervisors. 12.) Learn and follow safety regulations and be held responsible for at-fault accidents. 13.) Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects. 14.) Perform necessary work while complying with all company policies and procedures as well as any regulatory authority (i.e. OSHA, MSHA, etc.) 15.) Perform additional duties as required or directed by their immediate supervisor or other manager. 16.) From time to time will preform general labor duties such as shoveling, raking, climbing inclines, as well as lifting, carrying, and loading materials on uneven terrain. MINIMUM REQUIREMENTS: Education: High school diploma or GED preferred Must be a minimum of 21 years old. Work Experience: Minimum of 2 years' operating heavy equipment experience on a backhoe, dozer or excavator. Must be able to fine grade with a bulldozer and excavator. Experience on multiple machines a plus. Grading and excavation on commercial job sites required. Must have a good work ethic and work as a team player. If not operating heavy equipment the candidate will be required to perform general labor work if needed. Qualified candidate should be able to read plans and work with grades. Other: Must have reliable and dependable transportation to the job site. Working outside in all types of weather is a must in this industry. Regular and constant attendance is a must. If needed, must be willing to work nights and weekends. Applicant must be able to pass a background check for the NC Ports and military bases. Heavy Physical Demands: Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

📍 Wilmington, NC | 🏢 Global Laser Enrichment (GLE) 🕒 Full-Time | On-Site | Shift Work Required 🔐 Q-Clearance Required At Global Laser Enrichment (GLE), we are pioneering uranium enrichment technology that will shape the future of clean energy and national security. We are seeking a Nuclear Facility Equipment Operator to support the safe and efficient operation of our enrichment systems. Working under the direction of the Shift Supervisor, you will monitor, control, and operate facility equipment while ensuring compliance with NRC regulations and internal procedures. This role is vital to maintaining plant performance and supporting operational milestones. 🌟 Why Join GLE? Be part of a mission-critical program with national and global impact. Gain hands-on experience with state-of-the-art enrichment equipment. Contribute to a culture of safety, compliance, and continuous improvement. Competitive compensation, shift differential, and strong benefits package. ⚙️ What You'll Do Operate, monitor, and control UF6 enrichment equipment. Start and stop plant systems as required for operations. Monitor operating parameters and respond to alarms in compliance with facility procedures. Record and analyze operational data, supporting engineering and safety reviews. Perform administrative tasks including shift turnovers, logs, and reporting. Support NRC compliance and conduct-of-operations standards. Respond to facility transients and assist in mitigation efforts. Support equipment maintenance and commissioning activities. Participate in lockout/tagout procedures, corrective action programs, and procedure improvements. Actively engage in initial and continuing training to maintain station qualifications. 📘 What You'll Bring Associate degree preferred, high school diploma required. 2+ years of relevant plant experience (nuclear power plant, Navy nuclear propulsion, or similar). An active DOE/NRC Q-Clearance (or an active DOD Top Secret Clearance). Knowledge of nuclear plant systems and health physics procedures. Ability to troubleshoot plant equipment and generate maintenance requests. Strong attention to detail and ability to follow procedures with accuracy. Proficiency in technical documentation, log keeping, and data analysis. Willingness to work off-normal shifts and extended hours as needed. 🎯 Preferred Background Prior experience as a nuclear operator or equivalent in a highly regulated environment. Demonstrated ability to apply human performance tools in daily operations. Experience supporting commissioning and system modifications in industrial facilities. 🔐 Important Note Due to the sensitive nature of our work, U.S. Citizenship and eligibility for a DOE/NRC Q-Clearance are required.

AVAILABLE POSITIONS: 1 PRIMARY FUNCTION: Perform general tasks involving physical labor as well as operating the loader and Bobcat at pits and/or plants. May operate hand and power tools of all types: Air hammers, small mechanical hoists, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces for support, cleaning up rubble and debris and keeping plant yard clean at all times. ESSENTIAL DUTIES: Loader Operator Operate loader as needed for moving and loading materials at pits or on plant yard. May also be required to use jackhammers, drills and other power tools. Position, join, align, and seal structural components. Shovel materials. Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials. Spray materials such as water, sand, steam, or paint through hoses to clean, coat, or seal surfaces. Tend all machines used in the day to day operations. Tend pumps, compressors, and generators to provide power for tools, machinery, and equipment, or to heat and move materials. Lubricate, clean, and repair machinery, equipment, and tools. Apply caulking compounds by hand or using caulking guns. Clean and prepare sites to eliminate possible hazards. Control traffic passing near, in, and around work area. Erect and disassemble scaffolding, shoring, braces, ramps, and other temporary structures. Load, unload building materials, machinery, and tools. Mix ingredients to create compounds for covering or cleaning surfaces. Learn and follow safety regulations. Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. Perform additional duties as required or directed by their immediate supervisor or other manager. Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: Must be a minimum of 18 years old. Work Experience: Good work ethic. Experience operating loader preferred. MSHA certified a plus. Other: Candidate will need to have dependable transportation. Punctual, dependable and self motivated. Willing to work overtime and weekends. Valid NC driver license. Heavy Physical Demands: Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.