Package handler jobs in Portage, MI - 168 jobs

Full-time Description Sets up and operates powder coating line by performing the following duties. May require overtime to include weekends and daily overtime. ESSENTIAL DUTIES AND RESPONSIBILITIES Loads parts on the line based on the supplied paint line schedule. Hanging accurate and efficiently based on the provided work instructions. Assisting with pre-racking parts as needed. Visually inspect parts loaded on to the line for quality concerns, such as rust contamination. Accurately complete all work documentation such as tracking down time, quantity of parts loaded on to the line, necessary scrap tags. Efficient in Excel and Microsoft is a plus. Fills in at other work areas in the company as needed. Work well with teammates and make Team Lead aware of any concerns. Look for ways to improve line capacity and quality. May be required to work off shifts as needed. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. BENEFITS Health, Dental, Vision, HSA & FSA, 7 Paid Holidays, Vacation, 401k Traditional & Roth with company match, quarterly and annual attendance awards, and Tuition Reimbursement program Requirements EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. COMPANY POLICIES AND PROCEDURES Is trained in and follows Company safety policies and procedures and participates in the Continuous Improvement and Corrective Action programs. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; and talk or hear. The employee frequently is required to reach with hands and arms. The employee must frequently lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, and color vision. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and toxic or caustic chemicals. The noise level in the work environment is usually moderate.

Description: Overall responsibilities include distribution of finished goods to US Market, distribution of finished goods to international markets and warehouse/shipping material handler. Qualifications: Must be experienced in distribution of finished goods to US and/or international markets and with general warehouse/shipping practices. Must be familiar with general safety procedure and guidelines. Must be self motivated and have a strong attention to detail. Good communication skills required.

Job Summary: Responsible for all coordinating, purchasing, and verification of steel required for production. Required Education and Experience: * Bachelor's Degree from four-year college or university required and four to ten years related experience/training, or equivalent combination of education and experience * Must have a good knowledge of the English language * Must have an overall knowledge of the auto industry * Must have an in depth knowledge of the steel industry, as well as a metallurgical knowledge of steel * Excellent communication, teamwork, organization, and time management skills * Computer proficiency, including Microsoft Office (Word, Excel, Outlook, PowerPoint) and inventory management system (CMS) * Must be able to multi-task, research, self-motivate, analyse data, work independently, negotiate and persuade, and adapt to an ever-changing work environment * Knowledge of Customer Specific Requirements * Knowledge of ISO 9001/IATF 16949 Essential Functions: * Perform plant walk around regularly to review receipts and schedules, check inventories, and review received material * Communicate with suppliers to coordinate, negotiate, purchase, and verify steel required for production * Troubleshoot with accounting on payables issues * Communicate with receiving to verify inbound steel schedule * Assist with inventory counts in steel area, including weld wire, stamping lubricants, and DS tubes * Organize all steel shippers, certifications, NAFTAs, and certificate of origins for material that needs to be shipped to our overseas tool shops and sister plants * Check incoming material certifications and verify that all incoming material meets standards * Run plant inventory and post to Martinrea Central * Send flat steel samples to independent labs for testing and work with corporate metallurgy * Any other duties or responsibilities assigned by the Materials Manager or the Materials Supervisor * Abide by all Company polices including, but not limited to the following: Health and Safety, Quality and Environmental Systems, Human Resources policies, and the Martinrea Employee Handbook Language Skills: * Ability to read, analyse, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: * Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: * Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Work Environment: * 90% Office Environment, 10% Plant Floor (PPE Required) Physical Demands: * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the essential duties of this job, the employee is regularly required to talk, hear, sit, and use hands to finger, handle, or feel. The employee is occasionally required to drive/travel, reach, walk, and lift up to 10 pounds. Close, distance, color, and peripheral vision are all required. Health and Safety: * Must work in accordance with Health and Safety regulations, Company and plant rules, policies and procedures * Must use or wear Personal Protective Equipment and certain clothing as required by the Company Other Duties: * This is not designed to contain a comprehensive list of duties and responsibilities required for this job. Duties and responsibilities may change at any time with or without notice Disclaimer: This job description does not constitute a contract of employment. The Company may exercise its employment at will right at any time

Job Description Forklift Operator As a Forklift Operator you are essential to the daily operations of Zip Xpress. In this role you will safely load and unload trailers, coordinate freight movements within the warehouse, stage and verify freight, practice safe load securement and arrangement, break-down loaded pallets, and work to serve as an example of Zip Xpress' culture. ESSENTIAL FUNCTIONS Follow instructions/guidance of upper management Serve as a great example of the company culture by understanding, and consistently following, and maintaining the policies and procedures of Zip Xpress Must demonstrate being discrete, prompt, and professional Strategically arranging freight within trailers Adhering to guidelines on safe freight placement and securement Weighing freight and verifying adherence with DOT guidelines for weight distribution and limitations Fulfilling customer orders as directed Working in a physical and extremely fast paced environment Seated forklift work Staging and verifying inbound freight Loading and securing outbound freight Organizing and cleaning used workplaces at the end of each shift Any other task as requested by management MINIMUM QUALIFICATIONS Must be able to support the Zip Xpress' culture with a focus on teamwork and a commitment to service Verbal and written communication skills Demonstrated ability to achieve high performance goals and meet deadlines in a fast-paced environment US Citizenship required PREFERRED QUALIFICATIONS Experience with Transportation and Logistics Knowledge of loading and unloading tractor-trailer best practices Knowledge of load securement best practices Experience within a warehouse environment 1 year of experience operating a forklift Valid Driver's License COMMUNICATION Effectively and regularly communicate with the Zip Xpress Management and warehouse management staff Support company values, principles, vision, and mission PHYSICAL REQUIREMENTS Lift up to 50lbs frequently to occasionally Stand/walk/sit for extended periods during each day Bend and Twist frequently Reach/work above shoulders frequently Fine manipulations frequently Gross manipulation frequently Push/pull frequently Operate a forklift PAY RATE & SCHEDULE $20 per hour starting wage This position works on 2nd shift starting at 5pm, shifts end as each day's workload is completed. WORK ENVIRONMENT Typical Warehouse Environment TRAVEL This position does not require travel outside of the designated location POSITION TYPE This is a full-time non-exempt position RELOCATION Relocation expenses are not provided, and must be able to commute to our Holland, Michigan location on a regularly scheduled basis. HIRING PREFERENCE Zip Xpress is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.

Material Handler Our client is seeking a Material Handler to join their rapidly growing team. The Material Handler is responsible for accurately moving, locating, and storing materials using a forklift or other powered equipment. The ideal candidate is a team player and has previous warehouse/manufacturing experience. Key Results Areas Safe & efficient operation of all the power-operated equipment that requires certification Accurately pick and pack items for shipment, potentially with a forklift Complete required paperwork and project time-tracking documentation Ensure all items not needed short term are restocked according to established procedures Assist with contacting freight couriers to schedule pick-ups and deliveries Label and prepare items for shipment and load and unload trucks as needed Update the Warehouse Management system with transactions Perform daily safety checklist and standard battery charging procedures Assist team members in meeting and exceeding customer expectations Update supervisor and team lead on issues or concerns Maintain a clean, organized, and safe work area Skills & Qualifications High School Diploma or GED or three years of relevant warehouse experience required Previous warehouse or manufacturing experience is required Current forklift certification or the ability to become certified within 30 days required Must be able to read and understand written and verbal instructions Strong attention to detail Able to lift up to 40 pounds alone and greater weights in a team-lift environment Capable of lifting, carrying, bending, stretching, and standing for long periods Able to climb ladders as needed XPDEL, Inc. is committed to an inclusive workplace that does not discriminate against race, nationality, religion, age, marital status, physical or mental disability, sexual orientation, gender, or gender identity. We believe in diversity and encourage any qualified individual to apply. We are an EEOC Employer.

Forklift Operator As a Forklift Operator you are essential to the daily operations of Zip Xpress. In this role you will safely load and unload trailers, coordinate freight movements within the warehouse, stage and verify freight, practice safe load securement and arrangement, break-down loaded pallets, and work to serve as an example of Zip Xpress' culture. ESSENTIAL FUNCTIONS Follow instructions/guidance of upper management Serve as a great example of the company culture by understanding, and consistently following, and maintaining the policies and procedures of Zip Xpress Must demonstrate being discrete, prompt, and professional Strategically arranging freight within trailers Adhering to guidelines on safe freight placement and securement Weighing freight and verifying adherence with DOT guidelines for weight distribution and limitations Fulfilling customer orders as directed Working in a physical and extremely fast paced environment Seated forklift work Staging and verifying inbound freight Loading and securing outbound freight Organizing and cleaning used workplaces at the end of each shift Any other task as requested by management MINIMUM QUALIFICATIONS Must be able to support the Zip Xpress' culture with a focus on teamwork and a commitment to service Verbal and written communication skills Demonstrated ability to achieve high performance goals and meet deadlines in a fast-paced environment US Citizenship required PREFERRED QUALIFICATIONS Experience with Transportation and Logistics Knowledge of loading and unloading tractor-trailer best practices Knowledge of load securement best practices Experience within a warehouse environment 1 year of experience operating a forklift Valid Driver's License COMMUNICATION Effectively and regularly communicate with the Zip Xpress Management and warehouse management staff Support company values, principles, vision, and mission PHYSICAL REQUIREMENTS Lift up to 50lbs frequently to occasionally Stand/walk/sit for extended periods during each day Bend and Twist frequently Reach/work above shoulders frequently Fine manipulations frequently Gross manipulation frequently Push/pull frequently Operate a forklift PAY RATE & SCHEDULE $20 per hour starting wage This position works on 2nd shift starting at 5pm, shifts end as each day's workload is completed. WORK ENVIRONMENT Typical Warehouse Environment TRAVEL This position does not require travel outside of the designated location POSITION TYPE This is a full-time non-exempt position RELOCATION Relocation expenses are not provided, and must be able to commute to our Holland, Michigan location on a regularly scheduled basis. HIRING PREFERENCE Zip Xpress is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.

The Material Handler position is responsible for working with Fabrication Managers and/or Crib Attendant to stage parts and materials of jobs for Fabricators, working with Steel Receiving in separating and staging materials received from vendors, and working with Fabricators to make sure they have everything they need to do their job. This position will be responsible for driving the Company truck for building-to-building transfers as well as local deliveries and pick-ups. Qualifications Dedication to excellence and a quality output High school diploma or the equivalent Valid Michigan Chauffeurs License (or valid Driver License with the ability to obtain) Current Medical Examiner's License (or ability to obtain) Ability to read blueprints, lists of material and routers General Math Skills Ability to operate basic manufacturing equipment and tools Experience: one-year minimum experience in a manufacturing environment Responsibilities: Promote excellence throughout the department Maintain a clean, safe work area and conduct themselves in a safe manner Operate basic manufacturing equipment and tools Moving stock throughout the plant Assisting in moving of large equipment Maintenance of consumable inventory levels for Manufacturing floor Provide timely consumable products to the Manufacturing floor throughout the day Responsible for tagging and placing of materials and parts in proper locations Excellent communication with a variety of manufacturing personnel Work independently with only simple verbal instructions Transferring parts and materials from building to building, local deliveries and pick-ups Work in other areas of the operation as directed by supervision Physical Requirements While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.

Loading and unloading car parts from a line to another, you must load one part into the other to form a complete part, then you will fit them in their boxes and send them down the line. Must pay close attention to detail and catch and defects or damage. Must keep communication with your supervisor on wellness of parts. Carefully and safely move parts when finished.

WE ARE AUTOKINITON DRIVING SUCCESS FOR THE WORLD'S TOP AUTO MANUFACTURERS. At AUTOKINITON, we are more than just an automotive supplier - we are the backbone of vehicle performance and safety. Specializing in high-strength structural components and precision stamping assemblies, our parts are trusted by the world's leading automakers. Our dedicated teams, proudly deliver quality parts and assemblies that contribute to vehicle durability and safety. With decades of experience, a passion for continuous improvement, and a forward-thinking approach, we play a critical role in shaping the future of mobility. CAREERS WITH AUTOKINITON Building the Future-Together. Autokiniton is a trusted partner to the world's leading automotive manufacturers, known for our operational excellence and culture of continuous improvement. Our core value, "We, not I," reflects our commitment to collaboration, integrity, and shared success. We cultivate a workplace where independent thinking is encouraged, and every associate plays a vital role in our progress. Join a high-performance team committed to shaping the future of mobility-with opportunity, purpose, and growth at every turn. Shipping Materiel Handler RESPONSIBLITIES: * Keep area clean. * Maintain finished goods inventory. * Receive in daily deliveries, and scan orders. * Pre-stage shipments, load & unload trucks in required window time. * Operate Hi-Lo * Repacking of parts. * Create required shipping documentation. * Ensure parts are shipped in correct containers. * Ship and pull using FIFO. * Keep area with empty containers such as racks, totes, baskets outside building organized (back pad). TS 16949/ISO 14001 All associates are required to conform to TS 16949 and ISO 14001 standards and procedures. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * PAY AND SHIFT TIMES: Rate $19.50+.75 Shift 2nd This full-time, hourly role is a part of our Operations team and reports to the Operations Supervisor and Manager. WHY YOU WILL ENJOY WORKING HERE: Competitive Wages and Comprehensive Benefits: Medical, Dental, Vision, 401(k) with Company contribution match, and up to 15 paid holidays annually, thanks to our generous holiday and holiday bridge schedule. We also provide a tool allowance for our Skilled Trades Associates. Relocation Assistance: Our company offers comprehensive relocation assistance, including coverage for temporary housing and travel costs for our Skilled Trades and Salaried positions. Work-Life Balance: Many of our Associates have stayed with us for 25+ years! It takes a good work-life balance to make it that far. We support your personal and professional priorities as they impact your well-being. Growth Opportunities: Take your career to the next level through tuition reimbursement programs, on-the-job training, learning management systems, and advancement opportunities from within our organization. Learning and Development: We empower all our Associates - from entry-level to senior-level - with the skills and knowledge necessary to succeed in their current roles and beyond at AUTOKINITON. AUTOKINITON is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. AUTOKINITON makes hiring decisions based solely on qualifications, merit, and business needs at the time. Posted Date 11/25/2025

What We Do FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq. Why you should join us Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it's a fun environment where we truly enjoy working as a team and bringing great products to our customers! If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you! Position Summary: Maintains production and distribution of product by pulling orders from inventory, delivering production materials and supplies and staging finished product. Position Responsibilities: * Maintains inventory by identifying, labeling and placing materials and supplies in stock and recording location of inventory. * Locates materials and supplies by pulling and verifying materials and supplies listed on production orders. * Maintains in-process inventory at work centers by delivering and opening materials and supplies. * Documents materials and supplies disposition by recording units delivered and location of units. * Receives credit-return material and supplies from production by verifying materials and supplies code and lot number and quantity and placing materials in stock. * Prepares finished stock for shipment by identifying, pulling, packing, crating, loading and securing product. * Documents product shipment by recording units shipped. * Maintains material-handling equipment by completing pre-use inspections and making operator repairs. * Contributes to team effort by accomplishing related results as needed. Specific Knowledge, Skills, Abilities and Competencies: * Vision abilities required to validate and enter data on computer * Good working knowledge of Microsoft Office. * Ability to analyze and problem solve complex data and issues. * Continual process improvement focus. Position Qualifications: Education: HS Graduate or Equivalent. Experience: 1+ years of experience with inventory control. Exposure to safety management. Track record of meeting or exceeding deadlines. Work Environment and Physical Requirements: Activity Constantly - 6+ hours : Stand, Walk, Twist/Turn, Stoop/Bend, Squat, Kneel, Reach above shoulder Frequently - 3 to 6 hrs. : Lift to 50 lbs. Intermittent - * Indoor: 100 % of Time * Outdoor: 20 % of Time * High Humidity / Wet Conditions * Extremely Dusty / Dirty Conditions * Strong Odors * High Noise (80 - 90 dB) * High Vibration * Uneven Surfaces * Working from Heights * Mechanical Hazards * Chemical Hazards * Electrical Hazards * Possible Biological Hazards Disclaimer: This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs' essential functions. Note: FOX provides equal employment opportunities for all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, gender identity, sexual orientation, marital status, religion, age, physical disability (including HIV and AIDS), mental disability, results of genetic testing, or service in the military, or any other characteristic protected by the laws or regulations of any jurisdiction in which we operate. We base all employment decisions -including recruitment, selection, training, compensation, benefits, discipline, promotions, transfers, layoffs, terminations and social/recreational programs - on merit and the principles of equal employment opportunity. Fox offers an excellent compensation package and wide-ranging opportunities for professional development. Medical, Dental, Vision, Health Spending and Dependent Care Savings Accounts, Disability and Life Insurance benefit programs are available, as is a 401k plan with employer matching. Eligibility for all benefit programs is defined by the applicable plan document or employee handbook.

Summary/Objective: A level 1 warehouse position is the entry level position. The objective of this position is to develop a solid understanding of the basic requirements of the warehouse and demonstrate these requirements at an acceptable level of performance. Development of a strong skills base is required to move to the next warehouse associate level. Essential Functions: *Learn and demonstrate proficiency in packaging of aftermarket materials. *Learn and demonstrate proficiency in manual and automated roof kit equipment operation. *Ability to operate and pass certification for lift truck operation. *Complete and demonstrate proficiency in 6S processes and procedures. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Characteristic Duties: *Demonstrate a positive work ethic and attitude. To include the ability to work as a team. *Compliance with company attendance policy. *Demonstrate the ability to create and maintain a safe working environment. *Demonstrate the ability to maintain required performance metrics. Competencies: Supervisory Responsibility: Provide training, support and guidance as needed to ensure the employee has the best opportunity for success. Work Environment: *Indoor and outdoor work is required. *Warehouse conditions can change based on seasons. Physical Demands: Lifting of up to 50lbs on a daily basis. Position Type and Expected Hours of Work: *40 hours per week with potential for overtime. Travel: No travel is required for this position. Required Education and Experience: *High school diploma or equivalent. EEO Statement: All divisions of Airxcel provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Other Duties: Please be advised this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may

Material Handler / Production SupportLocation: Bristol, INPay Rate: $18.00 per hour HOURS: ) End time around 1:30 PM Overtime may be required; occasional early start times as early as 4:00 AM to meet production needs Job Summary:We are seeking a reliable and hardworking Material Handler to assist with moving materials throughout our production areas, including lamination, inspection/breakdown, and panel lamination. This position plays a key role in keeping production running smoothly and efficiently.Key Responsibilities: Assist with moving and staging materials in the lamination, inspection/breakdown, and panel lamination areas Perform heavy lifting (50+ pounds) consistently throughout the shift Support production teams by ensuring materials are available as needed Maintain a safe and organized work environment Follow all safety guidelines and company procedures Breaks: One 30-minute unpaid lunch Two 15-minute paid breaks Physical Requirements: Ability to lift 50+ pounds repeatedly throughout the workday Ability to stand, walk, bend, and perform physical tasks for the duration of the shift #Goshen

EJ has an immediate opening for a Material Handler on 3rd Shift. (10pm - 6:30am) Generous Benefit Package that includes: Paid Vacation and Holidays, Paid Maternity & Paternity Leave, 401K (with match), Medical, Dental, Vision, Flexible Spending Account, HSA with Employer Match, Disability Insurance, Employee Assistance Program, Employee Wellness Program, Life Insurance, Tuition Reimbursement and Bonus Program About EJ: We are the leader in the design, manufacture, and distribution of access solutions for water, sewer, drainage, telecommunications, and utility networks. EJ is a family-owned company with global operations. The corporate headquarters is in East Jordan, Michigan, where the company was founded in 1883. We are seeking high performing individuals who embrace our values, understand the importance of relationships, and strive for excellence. Our values, which have been passed down for generations, are the essence of our company's identity and our guide for making decisions. Core values at EJ include safety and security, honesty and integrity, environmental responsibility, respect for others, quality and excellence, and social responsibility. Location: Sunfield, MI SUMMARY Supports and assists the sales function by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Promotes the culture, the mission and vision, and the core values of the company. This includes adherence to and promotion of the company safety beliefs, employee engagement, competencies, code of conduct, and other policies and procedures. Reads work orders or follows oral instructions to ascertain materials or containers to be moved. Loads and unloads materials onto or from pallets and trucks by hand or forklift. Installs strapping, bracing, or padding to prevent shifting or damage in transit. Lifts heavy objects by hand or with power hoist, and cleans work area, machines, and equipment. Operates industrial truck or electric hoist to assist in loading or moving materials and products. Works and 8-hour shift with 30-minute lunch break and two scheduled 15-minute breaks. Promotes safety awareness, accident prevention, and employee involvement with regard to a safe work environment. Ensures employees understand the safety expectations of the organization. Promotes the company culture, the mission and vision, and the core values of the company. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High School Diploma or general education degree (GED); and one to three months related experience and/or training; or equivalent combination of education and experience. CERTIFICATES, LICENSES, REGISTRATIONS Driver's License PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee must frequently lift and/or move up to approximately 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to outside weather conditions. The noise level in the work environment is usually moderate. EJ is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Why join us? Our purpose is design for the good of humankind. It's the ideal we strive toward each day in everything we do. Being a part of MillerKnoll means being a part of something larger than your work team, or even your brand. We are redefining modern for the 21st century. And our success allows MillerKnoll to support causes that align with our values, so we can build a more sustainable, equitable, and beautiful future for everyone. Holland MI.!! 1st Shift: 7am-11pm (M-F) 2nd Shift: 3pm-11pm (M-F) 3rd Shift: 11pm-7am (Sun Night - Th Night) * An Operations Technician is part of our pay for skills program and allows individuals to continue to build skills providing opportunities to increase their compensation. * Skill blocks may include skills in Assembly, Machine Operation or Material Handling. ESSENTIAL FUNCTIONS * Individuals with Material Handling skills receive, store, and pull raw and finished goods through the facility in a safe, accurate and timely manner, along with the proper part tracking. * Performs additional responsibilities as requested to achieve business objectives. QUALIFICATION * To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. * The requirements listed below are representative of the knowledge, skill, and/or ability required. * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience * One of the following is required: (1) High school diploma or its equivalent (GED for example), (2) work experience which demonstrates performance competency Skills and Abilities * Ability to drive a Stand-Up Hilo/Forklift * Competent in basic math skills such as counting, adding, and subtracting. * Ability to work cooperatively within the team as well as with members of other teams to meet goals. * Demonstrated willingness to adapt to a continually changing environment. * Required to stand, walk, use hands to finger, handle or feel, reach with hands and arms for the duration of the shift. * Ability to regularly lift and move up to 10lbs, frequently lift and move up to 25lbs, and occasionally lift and move up to 40 lbs. * Required to communicate and to be able to see with or without correction. PHYSICAL DEMANDS * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Must be able to perform all essential functions of the position with or without accommodations. Who We Hire? Simply put, we hire qualified applicants representing a wide range of backgrounds and abilities. MillerKnoll is comprised of people of all abilities, gender identities and expressions, ages, ethnicities, sexual orientations, veterans from every branch of military service, and more. Here, you can bring your whole self to work. We're committed to equal opportunity employment, including veterans and people with disabilities. This organization participates in E-Verify Employment Eligibility Verification. In general, MillerKnoll positions are closed within 45 days and are open for applications for a minimum of 5 days. We encourage our prospective candidates to submit their application(s) expediently so as not to miss out on our opportunities. We frequently post new opportunities and encourage prospective candidates to check back often for new postings. MillerKnoll complies with applicable disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact MillerKnoll Talent Acquisition at careers_********************.

Why join us? Our purpose is design for the good of humankind. It's the ideal we strive toward each day in everything we do. Being a part of MillerKnoll means being a part of something larger than your work team, or even your brand. We are redefining modern for the 21st century. And our success allows MillerKnoll to support causes that align with our values, so we can build a more sustainable, equitable, and beautiful future for everyone. Holland MI.!! 1st Shift: 7am-11pm (M-F) 2nd Shift: 3pm-11pm (M-F) 3rd Shift: 11pm-7am (Sun Night - Th Night) An Operations Technician is part of our pay for skills program and allows individuals to continue to build skills providing opportunities to increase their compensation. Skill blocks may include skills in Assembly, Machine Operation or Material Handling. ESSENTIAL FUNCTIONS Individuals with Material Handling skills receive, store, and pull raw and finished goods through the facility in a safe, accurate and timely manner, along with the proper part tracking. Performs additional responsibilities as requested to achieve business objectives. QUALIFICATION To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience One of the following is required: (1) High school diploma or its equivalent (GED for example), (2) work experience which demonstrates performance competency Skills and Abilities Ability to drive a Stand-Up Hilo/Forklift Competent in basic math skills such as counting, adding, and subtracting. Ability to work cooperatively within the team as well as with members of other teams to meet goals. Demonstrated willingness to adapt to a continually changing environment. Required to stand, walk, use hands to finger, handle or feel, reach with hands and arms for the duration of the shift. Ability to regularly lift and move up to 10lbs, frequently lift and move up to 25lbs, and occasionally lift and move up to 40 lbs. Required to communicate and to be able to see with or without correction. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to perform all essential functions of the position with or without accommodations. Who We Hire? Simply put, we hire qualified applicants representing a wide range of backgrounds and abilities. MillerKnoll is comprised of people of all abilities, gender identities and expressions, ages, ethnicities, sexual orientations, veterans from every branch of military service, and more. Here, you can bring your whole self to work. We're committed to equal opportunity employment, including veterans and people with disabilities. This organization participates in E-Verify Employment Eligibility Verification. In general, MillerKnoll positions are closed within 45 days and are open for applications for a minimum of 5 days. We encourage our prospective candidates to submit their application(s) expediently so as not to miss out on our opportunities. We frequently post new opportunities and encourage prospective candidates to check back often for new postings. MillerKnoll complies with applicable disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact MillerKnoll Talent Acquisition at careers_********************.

2nd Shift: M-F, from 2:30p - 11p, with a pay rate of $16/hr + $1/shift premium. Mandatory overtime is required throughout the week, working until 1a, and on Saturdays 12p - 8p. General Labor involves all stages of the fabricating process, including loading, seaming, unloading, and inspecting glass at various workstations. Employees are trained in proper glass handling, loading techniques on different conveyor systems, and basic customer requirements for evaluating glass products. Daily assignments vary and are subject to change regularly. This position is eligible for Tech Level/pay increases after 90 days. ROLE RESPONSIBILITIES: Requires the ability to observe detail, concentrate, retain and recall oral and written instructions, communicate with co-workers and supervisors and identify and communicate problems to supervisors. Loading Check job specifications and prepare glass for a specific operation Requirements PHYSICAL REQUIREMENTS OF JOB: Work requires standing, lifting and movement for 8 hour periods with designated breaks Repeated lifting of objects weighing up to fifty (30) pounds Wear required PPE: safety glasses, ear plugs, steel toe shoes, cut-resistant jacket and gloves Ability to quickly and repeatedly lift and set glass safely for up to an 8 hour period Ability to tolerate noise, heat, humidity, dust and non-toxic machine oils and solvents OTHER REQUIREMENTS OF JOB: Must be a minimum of 18 years of age. Must be able to read, write, and understand English. Must successfully complete any training necessary to perform tasks. Must be able to perform basic mathematical calculations (addition, subtraction, multiplication and division); must be able to understand scales of measurement. Must comply with all safety rules and regulations, as well as promote safety awareness. Willingness and ability to function within, maintain, and respect an environment of confidentiality. Must comply with established work rules and applicable Paragon Tempered Glass, LLC policies and procedures. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Paragon Tempered Glass is an Equal Opportunity Employer. Salary Description $16/hr

Job Summary: Responsible for all coordinating, purchasing, and verification of steel required for production. Required Education and Experience: Bachelor's Degree from four-year college or university required and four to ten years related experience/training, or equivalent combination of education and experience Must have a good knowledge of the English language Must have an overall knowledge of the auto industry Must have an in depth knowledge of the steel industry, as well as a metallurgical knowledge of steel Excellent communication, teamwork, organization, and time management skills Computer proficiency, including Microsoft Office (Word, Excel, Outlook, PowerPoint) and inventory management system (CMS) Must be able to multi-task, research, self-motivate, analyse data, work independently, negotiate and persuade, and adapt to an ever-changing work environment Knowledge of Customer Specific Requirements Knowledge of ISO 9001/IATF 16949 Essential Functions: Perform plant walk around regularly to review receipts and schedules, check inventories, and review received material Communicate with suppliers to coordinate, negotiate, purchase, and verify steel required for production Troubleshoot with accounting on payables issues Communicate with receiving to verify inbound steel schedule Assist with inventory counts in steel area, including weld wire, stamping lubricants, and DS tubes Organize all steel shippers, certifications, NAFTAs, and certificate of origins for material that needs to be shipped to our overseas tool shops and sister plants Check incoming material certifications and verify that all incoming material meets standards Run plant inventory and post to Martinrea Central Send flat steel samples to independent labs for testing and work with corporate metallurgy Any other duties or responsibilities assigned by the Materials Manager or the Materials Supervisor Abide by all Company polices including, but not limited to the following: Health and Safety, Quality and Environmental Systems, Human Resources policies, and the Martinrea Employee Handbook Language Skills: Ability to read, analyse, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Work Environment: 90% Office Environment, 10% Plant Floor (PPE Required) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the essential duties of this job, the employee is regularly required to talk, hear, sit, and use hands to finger, handle, or feel. The employee is occasionally required to drive/travel, reach, walk, and lift up to 10 pounds. Close, distance, color, and peripheral vision are all required. Health and Safety: Must work in accordance with Health and Safety regulations, Company and plant rules, policies and procedures Must use or wear Personal Protective Equipment and certain clothing as required by the Company Other Duties: This is not designed to contain a comprehensive list of duties and responsibilities required for this job. Duties and responsibilities may change at any time with or without notice Disclaimer: This job description does not constitute a contract of employment. The Company may exercise its employment at will right at any time

Forklift Operator As a Forklift Operator you are essential to the daily operations of Zip Xpress. In this role you will safely load and unload trailers, coordinate freight movements within the warehouse, stage and verify freight, practice safe load securement and arrangement, break-down loaded pallets, and work to serve as an example of Zip Xpress' culture. ESSENTIAL FUNCTIONS Follow instructions/guidance of upper management Serve as a great example of the company culture by understanding, and consistently following, and maintaining the policies and procedures of Zip Xpress Must demonstrate being discrete, prompt, and professional Strategically arranging freight within trailers Adhering to guidelines on safe freight placement and securement Weighing freight and verifying adherence with DOT guidelines for weight distribution and limitations Fulfilling customer orders as directed Working in a physical and extremely fast paced environment Seated forklift work Staging and verifying inbound freight Loading and securing outbound freight Organizing and cleaning used workplaces at the end of each shift Any other task as requested by management MINIMUM QUALIFICATIONS Must be able to support the Zip Xpress' culture with a focus on teamwork and a commitment to service Verbal and written communication skills Demonstrated ability to achieve high performance goals and meet deadlines in a fast-paced environment US Citizenship required PREFERRED QUALIFICATIONS Experience with Transportation and Logistics Knowledge of loading and unloading tractor-trailer best practices Knowledge of load securement best practices Experience within a warehouse environment 1 year of experience operating a forklift Valid Driver's License COMMUNICATION Effectively and regularly communicate with the Zip Xpress Management and warehouse management staff Support company values, principles, vision, and mission PHYSICAL REQUIREMENTS Lift up to 50lbs frequently to occasionally Stand/walk/sit for extended periods during each day Bend and Twist frequently Reach/work above shoulders frequently Fine manipulations frequently Gross manipulation frequently Push/pull frequently Operate a forklift PAY RATE & SCHEDULE $20 per hour starting wage This position works on 2nd shift starting at 5pm, shifts end as each day's workload is completed. WORK ENVIRONMENT Typical Warehouse Environment TRAVEL This position does not require travel outside of the designated location POSITION TYPE This is a full-time non-exempt position RELOCATION Relocation expenses are not provided, and must be able to commute to our Holland, Michigan location on a regularly scheduled basis. HIRING PREFERENCE Zip Xpress is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.

Description: 1st Shift: M-F, from 6a - 2:30p, with a pay rate of $16/hr. Mandatory overtime is required throughout the week, starting at 4a, and on Saturdays 4a - 12p. General Labor involves all stages of the fabricating process, including loading, seaming, unloading, and inspecting glass at various workstations. Employees are trained in proper glass handling, loading techniques on different conveyor systems, and basic customer requirements for evaluating glass products. Daily assignments vary and are subject to change regularly. This position is eligible for Tech Level/pay increases after 90 days. ROLE RESPONSIBILITIES: Requires the ability to observe detail, concentrate, retain and recall oral and written instructions, communicate with co-workers and supervisors and identify and communicate problems to supervisors. Loading Check job specifications and prepare glass for a specific operation Requirements: PHYSICAL REQUIREMENTS OF JOB: Work requires standing, lifting and movement for 8 hour periods with designated breaks Repeated lifting of objects weighing up to fifty (30) pounds Wear required PPE: safety glasses, ear plugs, steel toe shoes, cut-resistant jacket and gloves Ability to quickly and repeatedly lift and set glass safely for up to an 8 hour period Ability to tolerate noise, heat, humidity, dust and non-toxic machine oils and solvents OTHER REQUIREMENTS OF JOB: Must be a minimum of 18 years of age. Must be able to read, write, and understand English. Must successfully complete any training necessary to perform tasks. Must be able to perform basic mathematical calculations (addition, subtraction, multiplication and division); must be able to understand scales of measurement. Must comply with all safety rules and regulations, as well as promote safety awareness. Willingness and ability to function within, maintain, and respect an environment of confidentiality. Must comply with established work rules and applicable Paragon Tempered Glass, LLC policies and procedures. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice. Paragon Tempered Glass is an Equal Opportunity Employer.