Process engineer jobs in Carlsbad, CA - 637 jobs

A semiconductor technology company is seeking a Senior Staff Engineer in Device Process Engineering in San Diego, CA. This role focuses on optimizing semiconductor processes for RF circuits, collaborating with teams to drive innovation, and mentoring staff. Candidates should have 8-12 years of experience in the semiconductor industry and hold an advanced degree in a relevant field. The position offers a competitive salary ranging from USD 177,975 to 231,381 annually. #J-18808-Ljbffr

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century's most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril's family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years. ABOUT THE TEAM The Production Automation team is responsible for the design, integration, and deployment of automated manufacturing systems across Anduril factories. ABOUT THE JOB Anduril's Production Automation team is seeking a Senior Production Automation Engineer to join our team. As a member of this team, you will have the opportunity to help define what production automation looks like for Anduril at a national scale. WHAT YOU'LL DO Lead machine safety efforts for manufacturing equipment across multiple Anduril production lines Be the safety expert during design, commissioning, and validation of automated / semi-automated production equipment Determine the relevant safety standards, conduct hazard analysis / risk assessments, and perform safety buyoff for equipment including conveyance, robotics, process equipment, and lifting systems Architect safety systems including E-Stops, scanners, light curtains, door interlocks, and other relevant hardware Investigate and provide corrective actions for equipment safety failures or workplace injuries Ensure regulatory compliance for production equipment REQUIRED QUALIFICATIONS Bachelor's degree in Robotics/Controls, Mechanical Engineering, Electrical Engineering, Manufacturing Engineering, or similar 4+ years of machine safety experience in a production environment Must have completed one of the following certifications: Functional Safety [TUV Rheinland] for Machinery Engineer, Functional Safety Engineer [TUV SUD], or Certified Machinery Safety Expert (CMSE) [TUV NORD] Deep knowledge in selection, integration, and validation of safety hardware Must be a U.S. Person due to required access to U.S. export controlled information or facilities PREFERRED QUALIFICATIONS 6+ years of machine safety experience in a production environment Experience with control panel layout, electrical component selection, and cable routing Familiar with CAD packages including NX, Solidworks, or AutoCAD Experience interfacing with regulatory agencies and safety committees US Salary Range $146,000-$194,000 USD The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top-tier benefits for full-time employees, including: Healthcare Benefits US Roles: Comprehensive medical, dental, and vision plans at little to no cost to you. UK & AUS Roles: We cover full cost of medical insurance premiums for you and your dependents. IE Roles: We offer an annual contribution toward your private health insurance for you and your dependents. Additional Benefits Income Protection: Anduril covers life and disability insurance for all employees. Generous time off: Highly competitive PTO plans with a holiday hiatus in December. Caregiver & Wellness Leave is available to care for family members, bond with a new baby, or address your own medical needs. Family Planning & Parenting Support: Coverage for fertility treatments (e.g., IVF, preservation), adoption, and gestational carriers, along with resources to support you and your partner from planning to parenting. Mental Health Resources: Access free mental health resources 24/7, including therapy and life coaching. Additional work-life services, such as legal and financial support, are also available. Professional Development: Annual reimbursement for professional development Commuter Benefits: Company-funded commuter benefits based on your region. Relocation Assistance: Available depending on role eligibility. Retirement Savings Plan US Roles: Traditional 401(k), Roth, and after-tax (mega backdoor Roth) options. UK & IE Roles: Pension plan with employer match. AUS Roles: Superannuation plan. The recruiter assigned to this role can share more information about the specific compensation and benefit details associated with this role during the hiring process. To view Anduril's candidate data privacy policy, please visit **********************************************

A leading engineering consulting firm in Newport Beach is seeking a Senior Project Engineer with expertise in transportation and civil infrastructure. Ideal candidates have a Bachelor's degree in Civil Engineering, at least 4 years of relevant experience, and preferably a California P.E. license. The role involves leading technical delivery and mentoring junior staff while contributing to impactful public infrastructure projects. Competitive salary and comprehensive benefits are offered. #J-18808-Ljbffr

Veridiam is a strategic manufacturing partner specializing in precision fabrication of components and assemblies made from exotic metals for critical applications in aerospace, defense, medical, nuclear, and space. Our roots were formed in the exacting nuclear and aerospace industries, expanded into medical where we have supplied critical components to a global customer base. Veridiam's ability to work with challenging materials such as titanium alloys, nickel-based superalloys, refractory metals, and specialty stainless steels ensures reliable, mission-ready products for our customers' most vital programs. As a trusted partner, Veridiam provides technical collaboration, quality assurance, and supply chain reliability essential to advancing innovation and operational success across these highly regulated industries and results for mission-critical parts made from titanium alloys, nickel-based superalloys, refractory metals and more. At Veridiam we recognize that talent is at the forefront of our organization and define who we are in today's industry. You will work in a highly regulated, precision manufacturing environment where safety, documentation integrity, dimensional control (“True Diameter”) and traceability are paramount. Veridiam is looking for a Materials Engineer for our El Cajon facility. Interested candidates should apply directly to our website at: Careers - Strategic Manufacturing Partner > Veridiam Position Summary Extract, research, develop, test, and improve materials used in our products and processes. Perform tests and conduct research on properties, performance and applications of metals including high-performance alloys. Analyze material behavior under various conditions and prepare technical reports. Essential Duties and Responsibilities Perform assigned routine and advanced or complex tests on raw material, product in process, re-worked material, finished goods and/or developmental samples in accordance with customer and/or quality standards/specifications. Conduct research on the properties, performance, and applications of metals including high-performance alloys such as stainless steel, titanium, and nickel alloys. Develop and test new materials to improve product durability, performance, and efficiency. Perform failure analysis and recommend design/material improvements. Analyze material behavior under various conditions (stress, temperature, corrosion, wear, etc.). Review and manage internal and external material lab test results. Develop and maintain processes for new product introduction. Prepare technical reports, specifications, and documentation for internal and customer use. Prepare, organize, and maintain necessary samples, forms, documentation and trend charts. May provide data and analysis to material review board to support resolution of issues, initial data support to supplier and/or customer notification. Ensure compliance with industry standards, safety regulations, and environmental requirements. Support process optimization and cost-reduction initiatives without compromising quality. Work collaboratively with cross-functional teams to ensure materials meet customer requirements and performance, quality and cost objectives. Provide and supply training for others in the area. Maintain clean and orderly work environment. Demonstrates ability to appear for work on time, follow directions from a supervisor, interact well with co-workers, understand and follow work rules and procedures, comply with company policies and procedures, goals and objectives, and accepts constructive feedback. Other duties as assigned, requested or needed. Position Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions. Education and Experience: Bachelor's degree in Materials Science, Materials Engineering, Metallurgy, Chemical Engineering or related field. Five (5) or more years' experience in manufacturing and/or familiarity of the international standards for testing metallic materials (ASTM E8) including steel products (ASTM A370) preferred or equivalent education and experience. Knowledge, Skills, and Abilities: Knowledge of metal forming, and/or machining methods preferred. Excellent written and verbal communication skills. Ability to read and interpret documents such as work orders, operating and maintenance instructions and procedure manuals and blueprints. Ability understand and follow standard operating and safety procedures. High-level attention to detail and commitment to quality standards. Strong problem-solving skills and technical expertise in materials science. The above statements are intended to describe, in broad terms, the general functions and responsibility levels assigned to this classification. Management has the right to change duties at any time to meet business needs. Pay Rate: The final salary offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and length of experience within the job, type, and length of experience with the industry, education, geographic location, etc. Veridiam is an Equal Employment Opportunity/Affirmative Action Employer. Veridiam will recruit, hire, train and promote persons into all jobs without regard to age, race, color, religion, ancestry, medical condition, sex, sexual orientation, gender identity, national origin, status as a veteran or status as an individual with a disability or any other characteristic or classification protected by law. Access to our facility (and, therefore, employment) is restricted under the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR) to U.S. Citizens, lawful permanent residents of the United States and properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes.

Job Title: Manufacturing Test Engineer (Electrical) Engagement Type: 1-Year Contract (with possible extension) Pay Rate: $26-$32.00/hour Schedule: Monday-Friday | 100% Onsite | 6:00 AM-2:00 PM (PST) Position Overview We are seeking a Test Equipment Technician to support manufacturing and test engineering operations at our Costa Mesa facility. This is an immediate need role focused on the maintenance, troubleshooting, and repair of test fixtures and equipment in accordance with Schneider Electric test engineering and quality standards. The ideal candidate will have a strong electrical engineering background, hands-on test experience, and exposure to high-voltage systems. Key Responsibilities Perform detailed maintenance, troubleshooting, and repair of test fixtures and test equipment Ensure all test equipment is properly maintained, calibrated, and operational Collaborate closely with Test Engineers to diagnose issues and resolve equipment failures Execute preventive and corrective maintenance tasks to maximize equipment availability, efficiency, and effectiveness Support workflow scheduling and complete required administrative documentation Ensure assigned tasks are completed accurately and within established timelines Adhere to all quality, safety, and engineering procedures Perform other related duties as assigned Required Qualifications Associate degree (AA/AS) in Electrical Engineering or Electrical Technology and 4+ years of related experience OR Certificate from a recognized technical trade school (or advanced military technical training) plus 4+ years of related experience OR High School Diploma or GED (required) with equivalent hands-on technical experience Strong hands-on experience with test equipment and electrical systems Ability to use electronic test and measurement equipment, including DVMs and oscilloscopes, and accurately interpret results Proficiency with basic hand tools and soldering techniques Strong written and verbal communication skills in English Basic computer proficiency, including Microsoft Word and Excel Good color vision for identifying color-coded wiring and cabling Preferred Qualifications Experience working with high-voltage systems (up to 480V) Manufacturing or test environment experience Electrical Engineering (EE) background Top Skills Test Equipment Maintenance & Troubleshooting Electrical Engineering Fundamentals High-Voltage Testing (480V preferred) Test Fixtures & Manufacturing Test Systems

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Reports to the Process Engineering Manager: This position's primary focus is to provide process engineering support and optimization assistance for MPLX's facilities including supporting operations in troubleshooting, process modeling, and PHAs. This person will collaborate with business development, engineering, operations, and the capital projects groups to develop, evaluate, and advance projects. All work will be performed in compliance with company standards, procedures, and government requirements. This position belongs to a family of jobs with increasing responsibility, competency, and skill level. The actual position title and pay grade will be based on the selected candidate's experience and qualifications. KEY RESPONSIBILITIES: * Work closely with Operations and Business Development to troubleshoot process related bottlenecks. * Provide process support for facility startups and shutdowns. (Planned and Unplanned) * Generate monthly KPI (Key Process Indicators) reports for facilities. * Provide process support for PHAs and LOPAs of facilities. * Assist Operations in the development and review of CPVs, SOLs, and Operating Procedures. * Provide process engineering support for root cause failure analysis of equipment, instrumentation, and process controls. * Participates in the development and review of new G&P standards including engineering, operations, PSM, environmental, and health and safety. * Must be able to handle assignments and projects with minimal supervision and complete within acceptable time standards. * Travel expected up to 33% based on location. Other MPLX locations may be considered. EDUCATION AND EXPERIENCE: REQUIRED: * Bachelor's Degree in Engineering from an accredited College or University * Minimum of 3 years of Process Engineering experience * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Valid Driver's License * Must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. PREFERRED: * Must have basic knowledge of process simulation software (HYSYS, Promax, Symmetry) * Chemical Engineering degree * PE License * Broad process knowledge of compressor stations, natural gas cryogenic processing facilities, and light end fractionation processes. * 7+ years in the oil & gas, chemical, pharmaceutical, or manufacturing industry SKILLS: Must have excellent verbal and written communication skills to effectively communicate with all levels of individuals/employees. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Midland, Texas Job Requisition ID: 00020052 Pay Min/Max: $104,300.00 - $179,800.00 Salary Grade: 11 - 12 Location Address: 600 N Marienfeld St Ste 450 Box 140 Additional locations: Bridgeport, West Virginia, Cadiz, Ohio, Canonsburg, Pennsylvania, Carlsbad, New Mexico, Denver, Colorado Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Kennedy Jenks is seeking a Drinking Water Process Engineer to join our team in California and contribute to projects focused on drinking water treatment, water reuse, and advanced water purification. This role offers the opportunity to work on both local and national projects, applying your technical expertise to complex water treatment challenges. Candidates at all stages of their career who are ready to take on increasing technical responsibility, contribute to innovative solutions, and collaborate with experienced engineers are encouraged to apply. Key Responsibilities Contribute technical expertise in municipal drinking water treatment, water reuse, and advanced water purification, including evaluating treatment processes, selecting appropriate methods, conducting engineering studies, and optimizing operations. Support project teams and client service managers in project pursuits, meetings, and technical discussions. Participate in feasibility studies, facility planning, and pilot testing for water treatment projects. Prepare technical deliverables, including basis of design reports, preliminary and detailed engineering drawings, specifications, process flow diagrams, and process instrumentation diagrams. Evaluate and optimize operations of existing water treatment facilities. Provide guidance and mentorship to less experienced engineers when appropriate, and collaborate with senior engineers on technical solutions. Stay current on industry standards, emerging technologies, and regulatory requirements. Qualifications BS or MS in Civil, Environmental, Chemical Engineering, or related discipline 5+ years of experience in drinking water treatment engineering, including process design, system optimization, or operational evaluation Engineer-in-Training (EIT) or Professional Engineer (PE) license; PE preferred or ability to obtain Strong technical, analytical, and problem-solving skills Ability to work collaboratively on multidisciplinary teams and communicate effectively with clients and project staff Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. Salary range for this position is expected to be between $120,000 and $210,000, and may vary based upon education, experience, qualifications, licensure/certifications, and geographic location. This position is eligible for performance and incentive compensation. Benefits Summary: Kennedy Jenks offers a comprehensive benefits package, including medical, dental, vision, life and disability insurance, 401k, bonus opportunities, tuition reimbursement, professional registration support, a competitive PTO and holiday plan, and other benefits and programs. #LI-hybrid

At Apple, we work every single day to craft products that enrich people's lives. Do you love working on challenges that no one has solved yet? As a member of our cellular standards group, you will have the unique and rewarding opportunity to shape the global wireless industry and contribute to upcoming products that will delight and encourage millions of Apple's customers every single day! In this technical role, you will be at the center of our cellular standards group, responsible for promoting the wireless technologies of our innovative wireless SoC products. You will have the chance to create algorithms and architectures of wireless communication systems, as well as collaborate with extraordinary RF/analog, HW, SW designers and architects to design SoC products to millions of Apple customers! Ph.D. with a focus on communication systems, signal processing or AI/ML for wireless communication Experiences in 3GPP standardization in 3GPP RAN4 Strong understanding of communication theory and relevant algorithm design experience on, including but not limited to, timing recovery, automatic gain control, modulation, channel estimation, equalization, MIMO signal estimation and detection, channel coding and error correction, and beam forming algorithms Strong understanding of RF fundamentals, wireless communication theory, and system design. Knowledge in existing wireless communication protocols, such as 5G/LTE/WCDMA/GSM, 802.11a/b/g/n/ac/ax/be, 802.11ad/ay or Bluetooth/BLE. Working knowledge of wireless communication systems (e.g., OFDM/MIMO, etc.). Proven experience in the algorithm development and implementation design of communication systems or signal processing algorithms, and ability to develop and implement performance tuning strategies and optimizations. Experience with Matlab or Python and/or C/C++ for algorithm development, modeling, and simulation. Fluency in written and spoken English and excellent communication skills Motivated to collaborate and contribute as a team, and able to deliver ambitious tasks in a timely manner. BS and 10+ years of relevant experience is required.

Jobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Materials & Process Engineer applies their technical knowledge and expertise in structural bonding to support components across our vehicle. This role works toward building and implementing conventional and novel materials and process solutions while working with our partners to ensure delivered hardware that meets requirements that leads to the certification and production of new AAM vehicles. This position collaborates with all Engineering verticals & Supply Chain teams during the design process. This position will be required to work on-site 5 days a week. What you can do: Author material specifications and process specifications that support manufacturing & ensure quality Evaluate materials across the vehicle to satisfy design requirements Support test plan execution for composites and structural bonding, method development, materials characterization, allowable generation, and design validation Author test reports and other summaries to communicate information to the broader engineering team Participate in design reviews for hardware components/assemblies Support supplier selection, development, qualifications, and ongoing evaluations Support the manufacture of hardware both in-house and at suppliers Participate in industry working groups, standards bodies, and relevant technical conferences and symposia to maintain awareness of technology developments & regulatory trends across academia and industry May require up to 25% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in STEM or related field required Minimum three (3) years of related experience (an equivalent combination of education and experience may be considered) Experience working with technicians Experience developing a Design of Experiments plan Experience running and analyzing data from analytical materials characterization equipment Technical knowledge in one or more of the areas of: adhesives, composites, structural bonding Hands on experience with composite layup and bonding Familiarity with 3D CAD software (CATIA, SolidWorks, NX, or similar) Familiarity with statistical software, including Minitab, JMP, or similar Knowledge of CMH-17, SAE, ASTM, and other standard bodies Proficiency in writing R&D work instructions and documentation of R&D work Proficiency MS Office Suite tools such as Word, Excel, Project & Visio Understanding of a “First Principles” approach to problem solving Proactive and efficient delivery of communication and follow-up Excellent organizational skills and attention to detail Must have the ability to independently prioritize and accomplish work in a timely manner You may also be able to contribute: Six Sigma Green Belt or higher preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is: $133,120 - $186,160 USD Click HERE or visit: *********************************** to view our benefits!

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. The Materials & Process Engineering internship program within Gas Turbine Product Engineering is designed to provide students with challenging assignments within gas turbine product design and development activities. Our organization is built from diverse engineering functions including Mechanical Design, Materials and Process Engineering, Gear and Rotor Systems Engineering, Condition Based Engineering, Aftermarket Engineering, and Turbine Production Engineering. Under the guidance of a mentor, interns are given a meaningful work experience, a project assignment to complete, and the opportunity to apply classroom education to real industry situations. Responsibilities include but not limited to: * Conducting materials research and analysis to support the development of new gas turbine components. * Performing failure analysis to identify root causes and recommend corrective actions. * Supporting design changes for product improvements with a focus on materials and processes. * Assisting in engine assembly support, production test support, and manufacturing support. * Developing and utilizing design tools for materials engineering applications. * Engaging in analytical simulations (FEA) and development engine or component testing. Minimum Qualifications: * Currently in the process of obtaining a 4 year or advanced degree in Materials Engineering or other relevant degree. * Classified by your school as either a Sophomore, Junior, Senior planning to attend graduate school, or currently attending graduate school. * Overall cumulative GPA of at least 2.8 on a 4.0 scale. Preferred Qualifications: * Previous co-op/internship experience. * Problem solving skills. * High energy level and sense of urgency. * Strong verbal and written communication skills. * Good business / technical judgment. * Ability to handle multiple priorities for a variety of tasks. Compensation: The hourly compensation for this role is $26.00-$43.00. Actual compensation will be determined by graduation year and degree type. #2026ETPosting This position requires working onsite five days a week. Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Posting Dates: January 8, 2026 - May 7, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Job Title: Materials and Process Engineer For immediate consideration, please apply directly to this job posting AND email me at biacosta @actalentservices.com with the following: 1) word copy of resume 2) 2-3 professional references 3) 4-5 brief bullet points highlighting technical qualifications Job Description We are seeking a Materials and Processes Engineer specializing in Composite Materials with a focus on interior structure. In this role, you will develop and improve materials and process specifications to consistently produce components with predictable performance as determined by qualification testing. You will provide Quality and Manufacturing teams with your technical opinion on the impact of exceptions to the expected performance of materials, assisting in the appropriate disposition of non-conformances. Additionally, you will guide the Design team on the suitable use of composite materials within a vehicle, considering service requirements, manufacturability, and integration with the rest of the vehicle. Responsibilities * Review drawings and part models to ensure the use of appropriate materials with necessary drawing notes for the required manufacturing processes. * Draft and revise materials and process specifications to produce products with predictable performance. * Troubleshoot issues in Manufacturing or at Vendors related to deviations from specifications or failure of existing specifications to produce the desired results reliably. * Collaborate with team members and leadership, and interact with Manufacturing, Engineering, and other departments for various projects. Essential Skills * Composite manufacturing * Process engineering * Composite materials and processes * Composite aircraft structural components * Autoclaves and oven curing * Bond preparation, surface treatments, and bonded assemblies * Familiarity with composite aircraft repair methods and processes * Manufacturing engineering * Process improvement * Materials science * Metallurgical and metallurgy * Materials engineering * Lean manufacturing Additional Skills & Qualifications * Bachelor's Degree or higher in a related Engineering or Physical Science field from an ABET or equivalent accredited institution. * Minimum of 5 years experience in the evaluation or processing of aerospace materials, including composites and plastics. * Experience with materials and process specifications for composite materials. * Knowledge of composite material mechanical testing and physical characterization methods. * Familiarity with statistical analysis methods of treating test data. * Experience in authoring/revising materials and process specifications for composite materials and associated processes. * Experience in developing a Design of Experiments for Process Improvement. * Excellent verbal and written communication skills. * Excellent organizational and problem-solving skills. * Excellent computer skills, familiarity with Microsoft Word, Excel, and PowerPoint. Work Environment This position is based at the Tustin Headquarters, a dynamic and innovative workspace designed to foster creativity and collaboration. The company culture is relaxed and informal, encouraging individuality and innovation. The headquarters focuses on research and development and is located in the FLIGHT at Tustin Legacy, a creative office campus situated on 17 acres with almost 372,000 square feet of space. Amenities include the Mess Hall Market, a 12,000-square-foot market food hall with chef-driven food and beverage concepts, a 6,000-square-foot conference center for meetings and special events, and expansive outdoor spaces for relaxation. The role is a 6+ month contract with a straight 40-hour workweek, operating in Pacific time. Job Type & Location This is a Contract position based out of Tustin, CA. Pay and Benefits The pay range for this position is $55.00 - $75.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tustin,CA. Application Deadline This position is anticipated to close on Feb 10, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Manages and executes new device readiness in alignment with Product Management and Operations Manages the device functionality and performance for the life of the product from launch to end of life Black Box (M2M) Device scripting to meet product manager and product owner requirements Basic PEG (CalAmp) modifications, Montage IONXT and other vendors Creating and executing test plans for new and existing devices Create Documentation for FW releases, script updates, How To's, etc UI Functionality Testing - Ensure accuracy from device through customer application Field Support - high value / high profile customer resolution and provide support to 3LS Device validation of new and prospective products - reliability, configurability, functionality, etc Manage and oversee customer and device migrations Migrations from legacy systems to new production systems Create, Modify and Provide Input on support tools. Device maintenance Maintenance cycle - firmware and configurations Firmware release validation and testing Manage new firmware releases Qualifications Required: 2-year Associates degree in Electronics Technology or equivalent Preferred: BSEE 2+ years of experience with a focus in M2M devices. Additional Information Job Status: Full Time Share the Profiles to ********************* Contact: ************ Keep the subject line with Job Title and Location

The Company Dexcom Corporation (NASDAQ DXCM) is a pioneer and global leader in continuous glucose monitoring (CGM). Dexcom began as a small company with a big dream: To forever change how diabetes is managed. To unlock information and insights that drive better health outcomes. Here we are 25 years later, having pioneered an industry. And we're just getting started. We are broadening our vision beyond diabetes to empower people to take control of health. That means personalized, actionable insights aimed at solving important health challenges. To continue what we've started: Improving human health. We are driven by thousands of ambitious, passionate people worldwide who are willing to fight like warriors to earn the trust of our customers by listening, serving with integrity, thinking big, and being dependable. We've already changed millions of lives and we're ready to change millions more. Our future ambition is to become a leading consumer health technology company while continuing to develop solutions for serious health conditions. We'll get there by constantly reinventing unique biosensing-technology experiences. Though we've come a long way from our small company days, our dreams are bigger than ever. The opportunity to improve health on a global scale stands before us. Meet the team: As a member of the Advanced Research & Technology (ART) Team you will support the evaluation of new technologies through testing, modeling, analysis, prototyping, and experimentation. Working as a member of a technology team, this engineer will collaborate and communicate with other engineers and scientists on the team as well as interface with technical personnel from other departments and vendors. This position offers a unique opportunity to have significant impact towards defining Dexcom's development roadmap and influencing the lives of millions of people within a small team of engineers. Where you come in: Design, setup, plan, and perform electrical, mechanical, or related experiments in the lab Design, fabricate, document, and troubleshoot new test fixtures and equipment Improve and/or optimize existing test equipment, fixtures, and methods Support development of new or improved test methods simulating actual product use conditions Generate and execute test protocols leveraging statistical best practices, documenting the results Analyze experimental data to build statistically sound models and develop conclusions Provide design recommendations while also acknowledging potential tradeoffs of solutions Build and evaluate prototypes What makes you successful: Comfortable working hands-on in a fast-paced environment Comfortable managing several parallel activities High Proficiency with engineering software tools for CAD (SolidWorks required) High Proficiency with statistical analysis (DOE, Gauge R&R, ANOVA, Power and Sample Size) Ability to deal with ambiguity/uncertainty and a willingness to try new/challenging things Strong interpersonal and teamwork skills Demonstrated written and verbal communication skills Familiarity with DMAIC problem solving techniques Familiarity with FEA tools (Abaqus preferred) Familiarity with JMP or Minitab (JMP preferred) Familiarity with programming (LabView preferred) Familiarity with image processing techniques Familiarity with control systems (actuators, pneumatics, sensors, etc.) Familiarity operating equipment within a machine shop (Mill, Lathe, etc.) Experience working within a regulated medical device environment Proficiency with Microsoft Office Products Basic skills or knowledge related to product, process, equipment, and fixture design, development and improvement What you'll get: A front row seat to life changing CGM technology. Learn about our brave #dexcomwarriors community. A full and comprehensive benefits program. Growth opportunities on a global scale. Access to career development through in-house learning programs and/or qualified tuition reimbursement. An exciting and innovative, industry-leading organization committed to our employees, customers, and the communities we serve. Travel Required: 0-5% Experience and Education Requirements: • Typically requires a Bachelor's degree in a technical discipline, and a minimum of 8- 12 years related experience or Master's degree and 5-7 years equivalent industry experience or a PhD and 2-4 years of experience. Please note: The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Dexcom's AAP may be viewed upon request by contacting Talent Acquisition at ****************************. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Dexcom Talent Acquisition at ****************************. Meritain, an Aetna Company, creates and publishes the Machine-Readable Files on behalf of Dexcom. To link to the Machine-Readable Files, please click on the URL provided: ***************************************************** Code=MERITAIN_I&brand Code=MERITAINOVER/machine-readable-transparency-in-coverage?reporting EntityType=TPA_19874&lock=true To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Dexcom. Only authorized staffing and recruiting agencies may use this site or to submit profiles, applications or resumes on specific requisitions. Dexcom does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to the Talent Acquisition team, Dexcom employees or any other company location. Dexcom is not responsible for any fees related to unsolicited resumes/applications. Salary: $128,600.00 - $214,400.00

JOB TITLE: Materials & Processes Engineer PAY RATE: $75/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Develop and improve materials and process specifications to ensure consistent composite component performance. Provide technical assessments to Quality and Manufacturing for process deviations and non-conformances. Advise Design on appropriate composite material selection based on performance, manufacturability, and vehicle integration. Review drawings and models to verify correct materials and manufacturing notes. Draft and revise materials and process specifications. Troubleshoot manufacturing and supplier issues related to composite processes and specifications. Collaborate with Manufacturing, Engineering, and cross-functional teams on projects. Requirements: Bachelor's degree or higher in Engineering or Physical Science (ABET-accredited or equivalent). 5+ years experience with aerospace materials, composites, and plastics. Experience with composite manufacturing processes, including out-of-autoclave methods. Knowledge of materials/process specifications and composite testing methods. Familiarity with statistical analysis of test data. Strong communication, organizational, and problem-solving skills. Proficiency in Microsoft Word, Excel, and PowerPoint; strong team player. Willing to work all shifts, overtime, and weekends as needed. Up to 25% travel to suppliers for technical support. Must be a U.S. Citizen (as defined by ITAR). Preferred Qualifications: 7+ years experience with aerospace composite materials. Experience with bond prep, surface treatments, bonded assemblies, and repair processes. Experience authoring/revising M&P specifications and conducting Design of Experiments (DOE). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today Engineers - #vij

CRB's nearly 1,400 expert professionals drive innovative, life-changing and life-saving solutions for manufacturers in the life sciences and food and beverage industries. Our mission, vision, and core values put client satisfaction and employee experience at the center of everything we do. As an AEC firm, we proudly specialize in industries that inherently carry important social responsibility - we recognize our impact and influence in the communities we serve and pursue corporate responsibility through the lens of people, community, and planet. From oncology and rare disorders to COVID-19 or alternative proteins, our design and construction projects are pioneering solutions addressing important issues such as food scarcity and global health. Job Description We are actively seeking a Process Engineer Intern to join CRB. Join our firm for an internship journey where you'll dive into real-world project work, learn from industry leaders and fully immerse yourself in the CRB employee experience. This program is more than just an internship-it's an opportunity to grow, innovate, and make a tangible impact on how we do business. You'll have the chance to work hands-on with cutting-edge projects, collaborate with peers and industry leaders, and contribute your unique perspective to spark meaningful change. At CRB, we believe that learning should be as dynamic as it is engaging, and that work can be both challenging and enjoyable. Join us to expand your horizons, build lasting relationships, and experience what it truly means to be part of a team that's dedicated to innovation and excellence. How will I contribute? As a Process Engineer Intern, you will work under the direction of an assigned Process Engineer mentor to develop and implement project deliverables. Project sizes will vary and consist mainly of pharmaceutical, biotech, food and beverage, or industrial projects including existing building renovations/retrofits and new construction. Our Process engineering team focuses on the design and engineering of manufacturing facilities and equipment, supporting facility infrastructure and critical utility systems. They are responsible for supporting the documentation of the process design scope in coordination with other disciplines. Core Responsibilities * Developing project documents and deliverables such as: * Block & Process Flow Diagrams * User Requirements Specifications * Equipment List * Equipment General Arrangements * Equipment Datasheets * Utility Summary * Piping and Instrumentation Diagrams * Plans, schedules, and installation details and specifications in coordination with manufacturing partners and trade partners * Assisting with the development of conceptual designs and coordinating with the design team under the direction of the project manager * Work with cross-functional teams, including architects, engineers and construction to ensure seamless project execution. Communicate findings and recommendations effectively to stakeholders. Qualifications Qualifications: * Currently pursuing a Bachelor's or Master's degree in Mechanical Engineering, Chemical Engineering, Bioprocess Engineering, or Biochemical Engineering from an accredited program * Available to work full-time during the internship period: May-August 2026 * Proficiency in Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, OneNote) * Strong interest in the Food & Beverage or Life Sciences industries * Excellent problem-solving skills with the ability to analyze complex data and develop actionable insights * Strong communication and collaboration skills, with the ability to work effectively across disciplines and with internal and external stakeholders (vendors, clients, contractors) * Eagerness to learn about the AEC industry and apply academic knowledge to real-world engineering applications * Willingness to relocate or work in one of CRB's internship locations, which may include: Kansas City (MO), Raleigh (NC), Orange County (CA), Philadelphia (PA), St. Louis (MO), Boston (MA), San Diego (CA), Kalamazoo (MI), Denver (CO), and/or Rockville (MD) Preferred Qualifications * Working towards Fundamental of Engineering Exam registration or completion preferred * Familiarity with AutoCAD, Revit and 3D collaboration tools (Navisworks, BIM360 Suite, Assemble) * Experience with process optimization and lean manufacturing principles * Familiarity with industry-specific regulations and standards within the AEC industry * Prior internship or co-op experience in Process Engineering or related field Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

A leading civil engineering firm in San Diego is seeking a qualified Civil Engineer with a BSCE degree and CA Registration. The role demands at least eight years of relevant experience, management capabilities in supervising technical staff, and proficiency in AutoCAD and Civil 3D. Key responsibilities include managing construction documents, project schedules, and leading design teams. Competitive compensation and benefits are offered, including the opportunity for leadership within projects. #J-18808-Ljbffr

pSemi Corporation is a Murata company driving semiconductor integration. pSemi builds on Peregrine Semiconductor's 30-year legacy of technology advancements and strong IP portfolio but with a new mission-to enhance Murata's world-class capabilities with high-performance semiconductors. With a strong foundation in RF integration, pSemi's product portfolio now spans power management, connected sensors, optical transceivers, antenna tuning and RF frontends. These intelligent and efficient semiconductors enable advanced modules for smartphones, base stations, personal computers, electric vehicles, data centers, IoT devices and healthcare. From headquarters in San Diego and offices around the world, pSemi's team explores new ways to make electronics for the connected world smaller, thinner, faster and better. Job Summary The Device Engineering Process role focuses on the development, integration, and optimization of semiconductor process technologies to support high-performance RF circuits. This includes collaborating with wafer foundries, defining and refining process modules (e.g., lithography, etching, deposition), and ensuring device reliability through rigorous testing and analysis. The engineer applies deep knowledge of device physics and process interactions to enable robust, scalable RFIC solutions aligned with technology roadmaps and product requirements. Responsibilities Define and drive execution of the technology roadmap for RFIC processes. Present technical strategy and roadmap updates to senior leadership. Drive innovation and contribute to intellectual property generation. Guide teams in advanced failure analysis and process construction methodologies. Ensure alignment of process development with product and business goals. Lead cross-functional project delivery with high autonomy and accountability. Develop and validate new process building blocks for next-generation technologies. Mentor staff and senior engineers to elevate technical capabilities. Use advanced modeling tools for EM, thermal, and mechanical simulations. Lead strategic process development initiatives with internal teams and external foundries. Minimum Qualifications (Experience and Skills) 8-12 years of experience in semiconductor industry Ability to define and execute technology roadmaps. Ability to mentor senior engineers and technical staff. Deep understanding of semiconductor manufacturing. Excellent communication and stakeholder engagement. Experience guiding advanced failure analysis efforts. Experience managing cross-functional teams and projects. Experience with modeling and simulation tools. Mastery of semiconductor process integration and layout interactions. Proven track record of innovation and IP contribution. Strong leadership and strategic thinking skills. Education Requirements MS or PhD in Electrical Engineering, Physics, Material Science, or related field. USD 177,975.75 - 231,381.29 per year Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position requires the ability to occasionally lift office products and supplies, up to 20 pounds. pSemi Corporation supports a diverse workforce and is committed to a policy of equal employment opportunity for applicants and employees. pSemi does not discriminate on the basis of age, race, color, religion (including religious dress and grooming practices), sex/gender (including pregnancy, childbirth, or related medical conditions or breastfeeding), gender identity, gender expression, genetic information, national origin (including language use restrictions and possession of a driver's license issued under Vehicle Code section 12801.9), ancestry, physical or mental disability, legally-protected medical condition, military or veteran status (including “protected veterans” under applicable affirmative action laws), marital status, sexual orientation, or any other basis protected by local, state or federal laws applicable to the Company. pSemi also prohibits discrimination based on the perception that an employee or applicant has any of those characteristics, or is associated with a person who has or is perceived as having any of those characteristics. Note: The Peregrine Semiconductor name, Peregrine Semiconductor logoand UltraCMOS are registered trademarks and the pSemi name, pSemi logo, HaRP and DuNE are trademarks of pSemi Corporation in the U.S. and other countries. All other trademarks are the property of their respective companies. pSemi products are protected under one or more of the following U.S. Patents: ************************ #J-18808-Ljbffr

Company DescriptionJobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Materials & Process Engineer applies their technical knowledge and expertise in structural bonding to support components across our vehicle. This role works toward building and implementing conventional and novel materials and process solutions while working with our partners to ensure delivered hardware that meets requirements that leads to the certification and production of new AAM vehicles. This position collaborates with all Engineering verticals & Supply Chain teams during the design process. This position will be required to work on-site 5 days a week. What you can do: Author material specifications and process specifications that support manufacturing & ensure quality Evaluate materials across the vehicle to satisfy design requirements Support test plan execution for composites and structural bonding, method development, materials characterization, allowable generation, and design validation Author test reports and other summaries to communicate information to the broader engineering team Participate in design reviews for hardware components/assemblies Support supplier selection, development, qualifications, and ongoing evaluations Support the manufacture of hardware both in-house and at suppliers Participate in industry working groups, standards bodies, and relevant technical conferences and symposia to maintain awareness of technology developments & regulatory trends across academia and industry May require up to 25% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in STEM or related field required Minimum three (3) years of related experience (an equivalent combination of education and experience may be considered) Experience working with technicians Experience developing a Design of Experiments plan Experience running and analyzing data from analytical materials characterization equipment Technical knowledge in one or more of the areas of: adhesives, composites, structural bonding Hands on experience with composite layup and bonding Familiarity with 3D CAD software (CATIA, SolidWorks, NX, or similar) Familiarity with statistical software, including Minitab, JMP, or similar Knowledge of CMH-17, SAE, ASTM, and other standard bodies Proficiency in writing R&D work instructions and documentation of R&D work Proficiency MS Office Suite tools such as Word, Excel, Project & Visio Understanding of a “First Principles” approach to problem solving Proactive and efficient delivery of communication and follow-up Excellent organizational skills and attention to detail Must have the ability to independently prioritize and accomplish work in a timely manner You may also be able to contribute: Six Sigma Green Belt or higher preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is:$133,120-$186,160 USD Click HERE or visit: *********************************** to view our benefits!

The Company Dexcom Corporation (NASDAQ DXCM) is a pioneer and global leader in continuous glucose monitoring (CGM). Dexcom began as a small company with a big dream: To forever change how diabetes is managed. To unlock information and insights that drive better health outcomes. Here we are 25 years later, having pioneered an industry. And we're just getting started. We are broadening our vision beyond diabetes to empower people to take control of health. That means personalized, actionable insights aimed at solving important health challenges. To continue what we've started: Improving human health. We are driven by thousands of ambitious, passionate people worldwide who are willing to fight like warriors to earn the trust of our customers by listening, serving with integrity, thinking big, and being dependable. We've already changed millions of lives and we're ready to change millions more. Our future ambition is to become a leading consumer health technology company while continuing to develop solutions for serious health conditions. We'll get there by constantly reinventing unique biosensing-technology experiences. Though we've come a long way from our small company days, our dreams are bigger than ever. The opportunity to improve health on a global scale stands before us. Meet the team: The Sensor Design and Characterization group within the Research and Development (R&D) organization is dedicated to the design and development of cutting-edge sensor technologies, guiding them from initial concept through to commercialization. These innovations are essential to improving the accuracy, reliability, and robustness of CGM systems. Our multidisciplinary team brings together individuals from diverse backgrounds and experience levels, fostering a collaborative and dynamic environment that drives creative problem-solving and breakthrough solutions. Where you come in: You will design and conduct benchtop and in-vivo experiments to evaluate existing and emerging CGM technologies at the component, sensor subassembly, and full system levels. You will collaborate with management and project leaders to align on project objectives, timelines, and deliverables. You will develop, standardize, and validate electrochemical bench test methods, including delivering test protocols and specifications, providing justification for engineering controls, and preparing comprehensive test reports. You will coordinate R&D sensor builds, equipment procurement, and related assignments. You will apply statistical techniques to analyze large datasets, assess system performance, and identify key parameters. You will partner with cross-functional teams to achieve project milestones efficiently, proactively addressing dependencies. You will present findings through oral presentations and written reports to peers and management. You will contribute to intellectual property development by drafting invention disclosures. What makes you successful: You have a B.S. in Physics, Chemistry, Chemical Engineering, Materials Science and Engineering, Biomedical Engineering, Electrical Engineering, or a related discipline. You have a technical background in electrochemistry or biosensors. You have hands-on experience working in a wet laboratory environment. You demonstrate strong analytical thinking, test method development, and problem-solving skills. You have experience with software tools such as JMP, MATLAB, Python, or SolidWorks. You possess a strong work ethic and excellent organizational skills. You can effectively work both independently and as part of a team, managing multiple projects simultaneously. You have excellent scientific communication skills, both verbal and written, and the ability to collaborate effectively. What you'll get: A front row seat to life changing CGM technology. Learn about our brave #dexcomwarriors community. A full and comprehensive benefits program. Growth opportunities on a global scale. Access to career development through in-house learning programs and/or qualified tuition reimbursement. An exciting and innovative, industry-leading organization committed to our employees, customers, and the communities we serve. Travel Required: 0-5% Experience and Education Requirements: Typically requires a Bachelor's degree in a technical discipline, and a minimum of 0-2 years related experience. Exempt Salary Details: The annual base salary range for this role is $68,200.00 to $113,600.00. Final compensation package will ultimately depend on factors including relevant experience, skillset, knowledge, business needs and market demand. Please note: The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Dexcom's AAP may be viewed upon request by contacting Talent Acquisition at ****************************. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Dexcom Talent Acquisition at ****************************. Meritain, an Aetna Company, creates and publishes the Machine-Readable Files on behalf of Dexcom. To link to the Machine-Readable Files, please click on the URL provided: ***************************************************** Code=MERITAIN_I&brand Code=MERITAINOVER/machine-readable-transparency-in-coverage?reporting EntityType=TPA_19874&lock=true To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Dexcom. Only authorized staffing and recruiting agencies may use this site or to submit profiles, applications or resumes on specific requisitions. Dexcom does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to the Talent Acquisition team, Dexcom employees or any other company location. Dexcom is not responsible for any fees related to unsolicited resumes/applications. Salary: $68,200.00 - $113,600.00