Process engineer jobs in Littleton, CO - 355 jobs

Nippon Sanso Matheson is a specialized gas equipment manufacturer for DUV, EUV, and purification systems for a variety of industries. The Manufacturing Engineer at Nippon Sanso Matheson will work with multiple disciplines to build, integrate, and test purification for toxic and non-toxic gases, and high- and low-pressure gas handling systems. This is an all-encompassing role to take designs through production and beyond. The ideal candidate will have hands-on experience with building mechanical structures, working in a team environment, and have good technical writing skills. Production Responsible for program module builds, following all builds from sub-assembly to final assembly to meet delivery deadlines. Develop, write, review, and implement manufacturing plans, production travelers and SOPs Ensure the product meets all customer requirements and travelers capture all required data Work directly with technicians and the production floor supervisors on product builds Help train technicians on processes and procedures Assist in the planning, development and implementation of manufacturing and quality activities Design Review Designs and Design changes for manufacturing Evaluate proposed designs for DfM, provide feedback to design team for manufacturability. Quality Drive non-conformances into actionable work and system improvements Assist in company-wide operational excellence projects and activities Procurement Develop and maintain relationships with specialty manufacturers and service bureaus in our supply chain Work with Procurement to meet the needs of inventory ordering and delivery Track and manage open inventory orders to ensure production is on time Manage inventory inspections and verification, and ensure products meet the requirements prior to being issued to the floor. Required Qualifications and Skills Bachelor's degree in engineering, Engineering Technology or other science related fields 1-4 years' experience Good written and verbal communication skills Must be eligible to work in the US Working knowledge of ISO9001-2015, ISO14001 Desired Skills Bachelor's degree- Engineering Discipline preferred Experience with gas handling system fabrication and test Experience with non-conformance resolution Experience with manufacturing process development Hands-on building Working in a clean room environment Working knowledge of ISO9001-2015, ISO-9001-IATF 16949, AS9100, ISO14001. Supplier Quality Engineering background Salary $85,000-$120,000, exact salary to be determined by the education, experience level, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data. Benefits 401(k) Retirement savings plan 401(k) Company matching & safe harbor contribution Health insurance Dental Insurance Vision insurance Health savings account & flexible spending account 8 Company holidays per year 3 Floater holidays per year. Paid time off - 2 weeks' vacation and one week sick time Paid Parental leave Scholarship Program Life Insurance Disability insurance Bereavement Leave Employee Assistance Program Additional benefits such as critical illness insurance, accident insurance, hospital indemnity insurance, legal insurance, pet insurance, and identity theft. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for long periods of time. The employee is occasionally required to stand, bend, reach, and walk. The position requires some physical effort. This would require the ability to lift or move objects up to 50 pounds. Duties will include working in a clean room environment and in environments exposed to chemicals. Nippon Sanso Matheson is a drug-free workplace and an Equal Employment Opportunity (EEO)/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, veteran status or any other protected factor. Nippon Sanso Matheson is committed to providing access, equal opportunity and reasonable accommodations for individuals with disabilities in employment, its services, programs, and activities Job Type: Full-time Pay: $85,000.00 - $120,000.00 per year Experience: Manufacturing engineering: 2 years (Preferred) Shift availability: Day Shift (Preferred) In office position. Ability to Commute to Longmont, CO.

In addition to the responsibilities listed below, this position is responsible for performing standard corrective repairs, preventive maintenance, and acceptance testing on all medical instrumentation; ensuring medical instrumentation is calibrated at the appropriate interval with supervision from a manager; and performing installations of standard medical instrumentation. Essential Responsibilities: Pursues effective relationships with others by sharing resources, information, and knowledge with coworkers and members. Listens to, addresses, and seeks performance feedback. Pursues self-development; acknowledges strengths and weaknesses based on career goals and takes appropriate development action to leverage / improve them. Adapts to and learns from change, challenges, and feedback; demonstrates flexibility in approaches to work. Assesses and responds to the needs of others to support a business outcome. Completes work assignments by applying up-to-date knowledge in subject area to meet deadlines; follows procedures and policies, and applies data and resources to support projects or initiatives with limited guidance and/or sponsorship. Collaborates with others to solve business problems; escalates issues or risks as appropriate; communicates progress and information. Supports the completion of priorities, deadlines, and expectations. Identifies and speaks up for ways to address improvement opportunities. Ensures that documentation is adequately maintained by: documenting ones action (e.g., maintenance, repairs, part replacement) in the centralized maintenance management system with minimal guidance and monitoring; documenting standards, procedures and protocols for all major processes and upholding all standards with limited oversight; and maintaining adequate parts of inventory for medical devices and software with limited oversight. Conducts ongoing preventative maintenance of medical equipment by: performing routine inspections and functionality tests of standard medical equipment (e.g., integrated, interoperable) medical devices and software with some direction; assisting with scheduled preventative maintenance of medical equipment and software (e.g., replacing parts) while exercising judgement and discretion; responding to straight forward requests for maintenance that may require judgment and discretion; and maintaining basic awareness of the status of ongoing preventative maintenance activities, problems, and concerns. Minimum Qualifications: Associates degree or vocational certificate in Electronic Service, or related field AND Minimum one (1) year of experience in medical technology field service with medical devices and systems or a directly related field OR Minimum two (2) years of experience in technology field service, or a directly related field. Additional Requirements: Preferred Qualifications: One (1) year of experience in field service of medical instrumentation. Certificate of Vendor Training involving directly related systems. Primary Location: Colorado,Aurora,Central Support Scheduled Weekly Hours: 40 Shift: Day Workdays: Mon, Tue, Wed, Thu, Fri Working Hours Start: 07:30 AM Working Hours End: 04:00 PM Job Schedule: Full-time Job Type: Standard Worker Location: Onsite Employee Status: Regular Employee Group/Union Affiliation: NUE-PO-01|NUE|Non Union Employee Job Level: Individual Contributor Department: Central Support Services - Clinical Tech Repair Depot - 0308 Pay Range: $34.9 - $45.16 / hour Kaiser Permanente is committed to pay equity and transparency. The posted pay range is based on possible base salaries for the role and does not include the value of our total rewards package. Actual pay determined at offer will be based on years of relevant work experience, education, certifications, skills and geographic location along with a review of current employees in similar roles to ensure that pay equity is achieved and maintained across Kaiser Permanente. Travel: No On-site: Work location is on-site (KP designated office, medical office building or hospital). Worker location must align with Kaiser Permanente's Authorized States policy. Kaiser Permanente is an equal opportunity employer committed to fair, respectful, and inclusive workplaces. Applicants will be considered for employment without regard to race, religion, sex, age, national origin, disability, veteran status, or any other protected characteristic or status. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

At BAE Systems, Inc. Westminster, Colorado location, we develop and manufacture state of the art RF & sensor technologies. If you'd like to join our growing operations team in a mission to enable our uniformed service members to go forth bravely and return home safely, this could be an ideal role for you. The Manufacturing & Test Operations (MTO) group comprises of talented individuals who are passionate about delivering new capabilities, optimize efficiencies and drive resiliency across our infrastructure. The Development Manufacturing Engineer has a challenging and dynamic role that requires a strong operational contributor. The ideal candidate will develop a solid relationship with the internal customer, define relationships with contract manufacturers and help grow an expanding product portfolio within BAE Systems SMS. The Operations Strategic Capabilities Unit plays a fundamental role in enabling efficient business and program execution - from strategic capital investments, industrial operations and an efficient supply chain, to state-of-the-art manufacturing and test operations and top-notch facilities management. What You'll Do: Provide hands-on manufacturing engineering support for products and processes within a development value stream. Modify, refine and provide input to ensure design producibility. Analyze data, evaluate and implement improvements to meet contract, quality and schedule requirements. Perform design reviews of drawings, procedures and engineering orders for completeness. Implement engineering changes and incorporate corrective action. Contribute to the generation of manufacturing schedules that meet program schedule milestones. Follow the principles defined within AS6500, participate in the necessary steps to produce products and processes that meet or exceed requirements. Actively participate in Manufacturing Readiness Level (MRL) Assessments. Work independently or in a team environment to resolve issues using data-based root cause analysis; diligently applies firm corrective actions. Maintain all manufacturing procedures, processes, records and reports in alignment with Quality Management System and/or contract requirements for quality and performance. Develop and maintain manufacturing build instructions. Maintain and control production tooling in accordance with QMS requirements. Design and/or communicate tool design needs to tool design engineers. Contribute to collection and analysis of technical data in support of product performance. Support status meetings with program managers and customers. Work collaboratively with cross-functional teams including Design, Development/Test Engineering, Quality Assurance, Supply Chain Management, Process Labs and outside suppliers. Maintain excellent rapport with internal/external customers. Maintain a solid understanding and use in-house business systems including Manufacturing Execution System, manufacturing shop floor control, internal status reporting, and product data management system. Maintain a regular and predictable work schedule. Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Capabilities Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment. Perform other duties as necessary. On-Site Work Environment: This position requires regular in-person engagement by working on-site five days each normally scheduled week in the primary work location. Travel and local commute between company campuses and other possible non-company locations may be required. Working Conditions: Work is performed in an office, laboratory, production floor, or cleanroom, outdoors or remote research environment. May occasionally work in production work centers where use of protective equipment and gear is required. May access other facilities in various weather conditions. Required Education, Experience, & Skills BS degree or higher in Engineering or a related technical field is required plus 2 or more years related experience. Each higher-level degree, i.e., Master's Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education. Experience with DFM principles. Experience with Root Cause Analysis and Defect Resolution/Disposition. GD&T knowledge. Demonstrates the ability to organize information, job tasks, and manage time for most efficient and effective performance. Knowledge of Product and Process Development. #LI-JL2 A DoD Interim Secret clearance will be required to start work and required to be maintained to continue work. Higher level clearance or access with Polygraph is not required to be eligible for this position. However, the applicant must be willing and eligible for submission, depending on program requirements, after an offer is accepted and must be able to maintain the applicable clearance/access. Preferred Education, Experience, & Skills Experience in Aerospace Industry. RF or Electro Optics knowledge or experience. Knowledge or experience in highly regulated manufacturing industries. Solid communication skills with ability to present to variety of audiences. Complementary skills such as programming languages, CAD, and other manufacturing tools. Pay Information Full-Time Salary Range: $79365 - $134921 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Space & Mission Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Headquartered in Boulder, Colorado, Space & Mission Systems is a leading provider of national defense and civil space applications, advanced remote sensing, scientific and tactical systems for government and commercial customers. We continually pioneer ways to innovate spacecraft, mission payloads, optical systems, and other defense and civil capabilities. Powered by endlessly curious people with an unwavering mission focus, we continually discover ways to enable our customers to perform beyond expectation and protect what matters most. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified. Multiple positions may be available on this opening.

ABSL Space Products, a division of EnerSys Advanced Systems, is the world's leading manufacturer of lithium-ion batteries for space applications. From our Longmont, CO facility, our team designs advanced lithium-ion battery systems to meet the extreme demands of space travel. Our batteries power cutting-edge spacecraft and launch vehicles, driving innovation in space exploration, scientific discovery, and beyond. At ABSL, we maintain a tight-knit, collaborative culture where employees enjoy the small-company feel while benefiting from the resources and stability of EnerSys, the global leader in stored energy solutions. As we continue to grow, we're looking for talented individuals who share a passion for space and power technologies to join our dynamic team. Certain positions at EnerSys Advanced Systems require access to information or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other U.S. government security regulations. Candidates for these positions should be a "U.S. Person" under ITAR (U.S. citizen, lawful permanent resident, or a refugee/asylee) and/or otherwise comply with ITAR requirements for access rights to be considered for a position. What We Offer: Generous Time Off - 3+ weeks of paid time off, plus 11 paid holidays Comprehensive Benefits - Medical, dental, and vision coverage for employees and dependents at a discounted rate Financial & Career Growth - Life insurance, short-term disability, educational reimbursement, flexible spending accounts, and an employee stock purchase plan 401(k) Matching - 100% match at a 6% contribution level Flexible Schedule - 9/80 work schedule (9-hour days Monday-Friday, with every other Friday off - meaning a 3-day weekend every other week!) Innovative & Collaborative Culture - Be part of a smart, high-performing, and passionate team that values creativity, diverse backgrounds, and an inclusive environment Great Location - Our Longmont, CO office is conveniently located right off the Diagonal Highway At ABSL, we don't just build batteries-we power missions that push the boundaries of what's possible. If you're excited about working in an innovative, fast-paced environment where your contributions make a real impact, we'd love to hear from you! Compensation Range: $46,400 - $57,900 (Compensation may vary based on applicant's work experience, education level, skill set, and/or location.) Learn More About ABSL Job Purpose To develop, optimize, document and implement cost-effective manufacturing processes. . Essential Duties and Responsibilities Establish and maintain standard operating procedures and quality documents Improve existing manufacturing processes Train operators and technicians on new procedures Research new manufacturing technologies Develop and perform test procedures and produce reports for new parts or processes. Use statistical process control tools to track and improve processes, including metrics, data collection, and analysis (i.e. Cpk Analysis) Develop maintenance and troubleshooting procedures for tools and equipment Evaluate production costs, support development, optimization and documentation to maintain a lean manufacturing Makes recommendations and implement process improvements Identifying problems, creating choices and providing alternative courses of action. Qualifications Minimum Qualifications High school diploma Preferred Qualifications A.A. in Engineering discipline preferred Ability to think and reason independently, with minimal supervisory assistance. Ability to write reports. Ability to solve practical problems and deal with a variety of concrete variables in the manufacturing process. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Intermediate to advanced level skills with Microsoft Office applications, with proficiency in WORD and EXCEL. Able to work with minimal supervision. Able to prioritize workload and meet deadlines. Detail-oriented. Effective analytical and problems solving skills. Creative and innovative. Ability to communicate new concepts effectively Working knowledge of SolidWorks or CAD desired General Job Requirements Must be able to stand for long periods of time Must be able to frequently bend; twist; reach; stoop; kneel or crouch. Must be able to differentiate colors. This position is exposed to harmful materials such as lead/fiberglass products. Periodic blood tests are required to measure the level of lead. Precautions are taken by the company/employee to reduce the risk of exposure and help ensure everyones safety. Employees are responsible for wearing the required Personal Protective Equipment in the proper manner at all times. Must be able and willing to work overtime. Must be able and willing to work varying schedules which may include nights, weekends, and public holidays. EnerSys provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Know Your Rights Know Your Rights (Spanish) Nearest Major Market: Boulder Nearest Secondary Market: Denver

A Manufacturing Engineer V will drive the development of world-class manufacturing systems for modular power and data center products. You'll apply DFM/DFMA principles alongside Design Engineering, designing robust assembly and integration processes, tooling, and workstations that enable efficient, scalable production. In this senior technical role, you'll own the manufacturing BOM, ERP routings, and workstation sequencing, while leading continuous improvement through lean methodologies and structured root-cause analysis. By collaborating with Quality, Operations, and Supply Chain teams, you'll help reduce costs, improve first-pass yield, and build high-quality, repeatable production workflows that scale with our business. RK Company Overview As a second-generation, family-owned enterprise, RK Industries, LLC (RK) offers a diverse range of construction, manufacturing, advanced fabrication and building services. Led by Rick and Jon Kinning, RK represents seven distinct lines of business that work together to provide seamless project collaboration. Our exclusive building methodologies, accredited safety standards and professional execution allow us to turn our customers' greatest concepts into reality. Position Summary The Manufacturing Engineer V is a senior-level technical authority responsible for developing world-class manufacturing systems that enable RK Mission Critical's modular power and data center product lines. This position leads the design and continuous improvement of integration and assembly processes, production tooling, and build sequencing, driving the practical implementation of Design for Manufacturability and Assembly (DFM/DFMA) principles to achieve efficient, high-quality, and scalable operations. The Manufacturing Engineer V provides expert-level DFM/DFMA guidance and ensures alignment between engineering documentation and production execution. Role Responsibilities Partner with Design Engineering to identify and eliminate Design for Manufacturability and Assembly (DFM/DFMA) risks during the product development phase, ensuring smooth hand-off to production. Design, optimize, and document robust assembly, integration, and testing processes for modular electrical and power infrastructure products. Provide expert-level feedback on shop drawing structure and content, ensuring alignment with physical workstation design, build sequencing, and production orders. Develop and implement tooling, fixtures, jigs, and material-handling systems to improve safety, reduce waste, and support standardized operations. Own the manufacturing bill of materials (BOM), routings, and workstation sequencing in the ERP system to enable repeatable, high-quality production. Champion lean manufacturing initiatives, including value stream mapping, standard work documentation, and continuous flow principles. Develop and maintain detailed manufacturing process documentation, including clear, visual work instructions, process control plans, and process validation records. Collaborate with Quality, Operations, and Supply Chain teams to improve First Pass Yield (FPY), reduce non-conformance cost, shorten cycle times, and lower overall production cost. Drive root cause analysis using DMAIC, 8D, or equivalent structured methodologies for complex production issues. Qualifications Bachelor's degree in Manufacturing, Mechanical, or Industrial Engineering (or related technical discipline). Master's degree in Manufacturing, Mechanical, or Industrial Engineering a plus. 10+ years of experience in manufacturing or process engineering, ideally within modular, prefabricated, or complex electromechanical assembly environments. Proven expertise in lean manufacturing, continuous improvement, and workstation optimization. Deep knowledge of workstation design principles, line layout and ergonomics. Strong knowledge and experience with ERP systems for production tracking, routing and process control. Strong skills in process development, documentation and standardization Strong command of DFM/DFMA methodologies, GD&T, and engineering drawing standards. Expert experience reviewing and refining shop drawing content to ensure alignment with production layouts and build sequencing. Proficiency in CAD tools for concept development, equipment & tooling design. Background in data center or power infrastructure manufacturing preferred. Proven record leading cross-functional lean or process improvement initiatives that deliver measurable productivity or cost benefits. Exceptional collaboration and communication skills for cross-functional project execution. Strong ability to work cross functionally and influence both Design Engineering and Manufacturing Teams. Minimum Physical Requirements and Accountability Work outside, inside, and in dusty, noisy and hazardous areas. Work in high places, tight places, confined spaces and/or other adverse locations. Climb, balance, squat, kneel and crouch. Work in all types of weather. Must have working knowledge of all trade materials and tools. Ability to lift and carry 51 to 75 lbs. occasionally, and/or 31 to 45 pounds of force frequently, and/or greater than negligible up to 16 to 22 pounds of force constantly to move objects. Comply with all company policies and procedures. Prompt, punctual, and regular attendance during core business hours, in an office environment (not a telecommuting position), currently located in the Aurora, including a reliable means of transport to and from work. Ability to occasionally travel between corporate offices and jobsites within the Greater Denver Area, during work hours. All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected. What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis. RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons Company, is seeking qualified candidates to fill a Digital Signal Processing Engineer (DSP) positions at our headquarters in Chantilly, VA. We are currently searching for full-time Digital Signal Processing Engineers that will design, develop and maintain complex systems. We meet customer and mission needs by leveraging cutting-edge research and technology, using small teams to rapidly get capabilities into the hands of the warfighter. Our technical efforts focus on signal processing, image processing, full-motion video, mission planning, and data analytics. As an integral part of our team, you would work on one or more efforts at a time, assisting with multiple parts of the development process, including design, development, testing and deployment. Since we deal with specific customer needs, it will be necessary to understand the problem, to utilize methods from a potentially wide variety of domains, produce functional solutions, and see the efforts through to completion. Opportunities to cross-cut technical areas and hone adjacent skills abound. What You'll Be Doing: * Design, develop, and optimize digital signal processing algorithms for [specific application, e.g., audio, communications, radar, etc.] * Implement DSP algorithms in software and/or hardware using programming languages such as C, C++, MATLAB, Python, etc. * Collaborate with cross-functional teams to integrate DSP solutions into larger systems and ensure compatibility * Conduct simulations, testing, and debugging of DSP algorithms to validate functionality and performance * Stay updated on advancements in DSP technologies and apply innovative techniques to sole novel challenges * Troubleshoot and resolve issues related to signal processing, hardware/software integration, and system performance * Support product development lifecycle, including prototyping, testing, and deployment of DSP-based systems What Required Skills You'll Bring: * Must have a Bachelor's or advanced degree in Electrical Engineering, Computer Engineering or related discipline * TS/SCI is required * Minimum of 10 years of experience in software implementation of algorithms related to digital wireless communications, signal processing, signal geolocation, estimation theory, image processing, control systems, statistics, machine learning and/or pattern recognition * Exposure with one or more tools/frameworks: X-Midas, GNU Radio, MATLAB * Minimum of 5 years within one or more programming languages: C/C++, Python * Minimum of 5 years of experience with Linux * Code management with Git or other common tools What Desired Skills You'll Bring: * Experience with CUDA or other parallel processing and high performance computing frameworks * Experience working with ARM or other non-x86 embedded platform * Experience using software-defined radio hardware (USRP or similar) for testing and/or prototyping * Application of machine learning techniques to signal processing, communications, and signal localization challenges * An active TS/SCI w/polygraph is preferred Security Clearance Requirement: An active Top Secret SCI security clearance is required for this position. This position is part of our Federal Solutions team. The Federal Solutions segment delivers resources to our US government customers that ensure the success of missions around the globe. Our intelligent employees drive the state of the art as they provide services and solutions in the areas of defense, security, intelligence, infrastructure, and environmental. We promote a culture of excellence and close-knit teams that take pride in delivering, protecting, and sustaining our nation's most critical assets, from Earth to cyberspace. Throughout the company, our people are anticipating what's next to deliver the solutions our customers need now. Salary Range: $144,800.00 - $260,600.00 This position will be posted for a minimum of 3 days and will continue to be posted for an average of 30 days until a qualified applicant is selected or the position has been cancelled. Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to ************************************************

Technical/Industry Experience and Qualifications Requirements: 15+ years of demonstrated Process Engineering experience executing projects in the oil and natural gas or chemical industries. Demonstrated capability as a Process Engineering lead for multiple simultaneous projects. Comfortable and capable of using soft skills to address personnel needs and challenges. Substantial experience of working in multi-disciplinary projects and teams. Highly effective technical and practical engineering skills and ability to consistently deliver quality, accurate and timely work to Worley and its customers. Ability to provide leadership within mechanical engineer in addition to Process is preferred. A sound knowledge of the fundamental requirements of Process Engineering, and the basic requirements of other engineering fields. A sound knowledge of applicable local and international standards and statutory and regulatory requirements. Competent use of Process Engineering specific software. AspenTech products (HYSYS, Flare System Analyzer, etc.) Honeywell Unisim products BRE ProMax Hydraulic modeling software Other internal and external calculation tools and software Competent use of relevant software such as MS Office Suite. Education - Qualifications, Accreditation, Training: Bachelors or Master's degree from an ABET accredited university or college in Chemical Engineering or related field. Professional Engineer (PE) status in Colorado or California. Preferred: Demonstrated experience executing projects in oil refinery process units including working with technology providers. Colorado Applicants: This position will be based in the Englewood/Denver, CO area. Salary\: $148,194-$205,854 annually commensurate with experience. Benefits\: eligible for PTO, 401k, medical, vision, dental, etc. #LI-NM4 Moving forward together We're committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law. We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here. And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We're bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now. Principal Process Engineer and Process Engineering Department Manager Denver, CO Purpose of the Role: We are seeking a Principal Process Engineer to lead the Process Engineering team. You will provide process engineering services to Worley and its customers, including technical support and mentorship to others within the process engineering team. You will be responsible for overall supervision of the Process Engineering team. You will bring natural gas processing, oil refining and/or chemical industry experience to specifically support Worley's clients in the US West Region. Responsibilities: Act as the Process Engineering Department Manager. Responsibilities include but are not limited to: Personnel Responsibilities Be an example of safe work habits at work and home. Assess and improve technical competence of Process Engineering personnel. Hire capable Process Engineers and assist in their introduction to Worley and their new coworkers. Perform annual performance reviews using Worley systems and provide feedback to employees. Be an official mentor to staff as assigned. Be an informal mentor to all Process Engineering staff. Perform annual salary assessments and communicate the results to employees. Promote career development within the process department. Identify subject matter experts and contribute to the Worley global system of posting their capabilities. Project Responsibilities Coordinate with the Project Management Team and forecast requirements for Process Engineering resources. Assign Process Engineering staff appropriately for project needs. Ensure Process Engineering commitments are met throughout the department. Promote inter-discipline communication and cooperation and resolve interface issues that arise. Prepare, or assign and review, Process Engineering staffing estimates for project tasks. Promote use of world-wide Global Integrated Delivery (GID) of Process Engineering in India and Bogota, Columbia. Promote cost reduction and productivity enhancing initiatives. Check compliance with Worley quality assurance/safety/sustainability standards. Ensure department cost and schedule promises are kept during project as studies and projects are executed. Relationship Development and Communication Responsibilities Develop strong relationships with Denver department managers, North American Process Engineering department managers, and GID counterparts. Participate in Global Engineering Team initiatives. Attend global Process Engineering Managers meetings and regularly contribute to the conversation. Promote the Worley culture and communication development within the Process Engineering department. Engineering Capabilities Capable of working on engineering studies or project production including leading a Process Engineering team. P&ID development on complex projects. Coaching and mentoring on process and other engineering staff in the Denver office. Understand and follow Worley Management System requirements. Become immersed in Worley project history and capabilities and market them to clients both directly and through presentations. Understand Worley work process maps to anticipate process engineering activities during near-term project execution to assist lead engineers and assigned projects. Demonstrate a visible and active commitment to achieving corporate delivery and execution requirements. Experience with Flow Assurance. Ability to utilize OLGA for various studies. Ability to conduct pipeline hydraulics and line sizing.

"What's it like to work at Agilent in Manufacturing? Watch the video" Agilent inspires and supports discoveries that advance the quality of life. We provide life science, diagnostic and applied market laboratories worldwide with instruments, services, consumables, applications and expertise. Agilent enables customers to gain the answers and insights they seek -- so they can do what they do best: improve the world around us. Information about Agilent is available at **************** Want to take your knowledge and experience further? Ready to provide technical leadership and make key decisions? This is your opportunity - not only to join a committed, professional, and forward-thinking team but also to lead in the design and implementation of complex manufacturing processes and transform broad concepts into structured results-focused projects. Join a growing team with this exciting new opportunity for an Process Engineer at our Boulder, Colorado GMP facility. Work in our dynamic, fast-paced, API-Biopharma manufacturing environment with the ability to contribute to the growing industry of oligonucleotide (DNA-RNA) based therapeutics. Responsibilities may include but are not limited to: Provide project/process engineering support of a GMP manufacturing process (Upstream, Midstream, Downstream, Utilities). Responsible for any area of focus with the existing manufacturing process. Area of focus will also be supported during projects. Supporting small to large sized capital projects throughout all phases of the project lifecycle, including the development of user requirement specifications, process design integration, equipment and instrumentation specification/selection, equipment procurement, installation, commissioning, qualification, and turn-over to manufacturing. Participate with project management through coordination of multi-disciplinary teams. Collaborate with Chemical Development and Manufacturing Services groups with activities such as technical transfer and scale-up of processes into manufacturing. Collaborate and facilitate project EHS activities including Process Hazard Analysis, Safety Checklist, and PSM compliance to meet OSHA standards. Ensure for all projects a high level of cGMP compliance to meet the ICH requirements for pharmaceutical buildouts. Support Validation activities including review of Factory Acceptance Test and Site Acceptance Test (FAT/SAT) protocols and participating in FAT/SAT execution, review of installation, operational, and performance qualification (IQ/OQ/PQ) protocols, participating in IOPQ execution, and review of final reports. Support regulatory activities including writing, review, and/or resolution of Change Controls (CC/CSC), Corrective and Preventive Actions (CAPAs), and audit responses. Integrate with Manufacturing and Quality Assurance groups with day-to-day troubleshooting and maintenance activities for projects/process, through identification of process improvement and optimization opportunities, including review of SOPs and MBRs. Perform job functions and responsibilities independently and with limited direction. Leads the development, design of new product/ process technology advancements; is the key technical contributor. Solves complex, high impact design/ development problems. Qualifications Bachelor's or Master's Degree in Mechanical, Electrical, or Chemical Engineering or equivalent education/experience. 4+ years of combined experience in pharma/biopharma and fine chemicals industry to include 3+ years of experience with process and instrumentation diagrams, facility layouts, equipment sizing calculations, user requirement specifications (URSs), standard operating procedures (SOPs) and process troubleshooting. Preferred Skills: 2+ years of experience supporting small to large-sized projects through all phases, including architectural and engineering design, design review, process safety management, process hazard analysis, equipment procurement, installation, commissioning, and qualification, is desirable. Self-motivated, hands-on problem solver with the ability to work within multi-disciplinary teams, including process development, manufacturing, validation, quality, safety, and project management personnel. Familiarity with current ASME BPE sanitary piping and equipment design standards, electrical standards such as National Fire Protection Association / National Electrical Code (NFPA 70 / NEC) and International Fire and Building Codes. Project Management experience in biopharma. Experience with design and programming of industrial control systems, including SCADA, PLCs, and BAS and validation documentation, including installation, operational and performance qualification (IQ/OQ/PQ) protocols. Engineering, communication, and organizational skills to support the safe, efficient, and compliant production of API within a fast-paced, dynamic, contract manufacturing facility. #LI-DT1 Additional Details This job has a full time weekly schedule. Applications for this job will be accepted until at least November 10, 2025 or until the job is no longer posted.The full-time equivalent pay range for this position is $103,200.00 - $161,250.00/yr plus eligibility for bonus, stock and benefits. Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. During the hiring process, a recruiter can share more about the specific pay range for a preferred location. Pay and benefit information by country are available at: ************************************* Agilent Technologies, Inc. is an Equal Employment Opportunity and merit-based employer that values individuals of all backgrounds at all levels. All individuals, regardless of personal characteristics, are encouraged to apply. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, religion or religious creed, color, gender, gender identity, gender expression, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status, registered domestic partner status, age, sexual orientation, military or veteran status, protected veteran status, or any other basis protected by federal, state, local law, ordinance, or regulation and will not be discriminated against on these bases. Agilent Technologies, Inc., is committed to creating and maintaining an inclusive in the workplace where everyone is welcome, and strives to support candidates with disabilities. If you have a disability and need assistance with any part of the application or interview process or have questions about workplace accessibility, please email job_******************* or contact ***************. For more information about equal employment opportunity protections, please visit *************************************** Required: 10% of the TimeShift: DayDuration: No End DateJob Function: Manufacturing

This position resides in the Process Operations team in the Process Development department and drives robustness and consistency in the laboratory through execution and innovation of laboratory practices. They drive efficiencies in Process Development while maintaining ownership of the laboratory and systems. They will have the responsibility of being operations leads on projects with increasing ownership and collaboration within the department. Through defined roles and responsibilities, the process operations team will be subject matter experts (SMEs) on both the execution of processes as well as the systems in the laboratory. The Process Development Associate supports and executes laboratory studies within the KBI Process Development organization at KBI under general supervision. The Process Development Associate is able to execute lab work, with documentation and reporting that is consistent with Process Development compliance and Quality standards. The Process Development Associate is able to author basic operational documents for routine unit operations within the laboratory organization. The Process Development Associate is capable of executing lab studies from written documents and applies standard scientific approaches to solving technical problems. The Process Development Associate may serve as the point of contact for a specific laboratory project. The Process Development Associate works under the general supervision of laboratory management with work reviewed for soundness and accuracy. The Process Development Associate will have a basic understanding of Process Development methods/unit operations as well as scientific principles in order to execute lab studies. The Process Development Associate will have the ability to execute laboratory experiments from written/verbal instruction. Basic technical writing and communication skills are desired. Basic understanding of laboratory equipment and equipment maintenance are required. The Process Development Associate participates in process development meetings and technical investigations if needed. Experience in various stirred tank fermentations (single-use and stainless), chromatography, precipitation, and filtration methods are highly preferred. The Process Development Associate will assist in the evaluation, development and implementation of new technologies leading to process improvements and efficiency of operations. The Process Development Associate will identify and implement continuous operation improvement ideas as a major part of this role. KBI Biopharma, Inc. is an EEO/AA employer and actively seeks to diversify its work force. Therefore, all qualified applicants, regardless of race, color, national origin, religion, gender, gender identity, sexual orientation, age, disability or veteran status, are strongly encouraged to apply. I understand that neither the completion of this application nor any other part of my consideration for employment establishes any obligation for KBI Biopharma, Inc. to hire me. If I am hired, I understand that either KBI Biopharma, Inc. or I can terminate my employment at any time and for any reason, with or without cause and without prior notice. I understand that no representative of KBI Biopharma, Inc. has the authority to make any assurance to the contrary. I attest with my signature below that I have given to KBI Biopharma, Inc. true and complete information on this application. No requested information has been concealed. I authorize KBI Biopharma, Inc. to contact references provided for employment reference checks. If any information I have provided is untrue, or if I have concealed material information, I understand that this will constitute cause for the denial of employment or immediate dismissal.

We are seeking a highly skilled and driven Sr. Advanced Materials and Process Engineer to join our team in Broomfield, CO. This role focuses on designing, developing, and testing advanced materials and manufacturing processes critical for complex systems to ensure reliability, scalability, and manufacturability. You will work closely with R&D, manufacturing, and quality to establish standard practices for material selection and process controls across hardware platforms. Quantinuum believes that employees work better, more efficiently and more collaboratively in close proximity to other employees, where ideas can be exchanged readily, and decisions can be made more quickly for the benefit of the Company and our customers. All employees should work at their assigned location; however, this role may offer the opportunity to work remotely up to 2 days per week, with approvals. * Works between scientists, engineers, material management, and technicians to select materials and processes based on mechanical, thermal, and chemical properties. * Research and qualify advanced materials for application on quantum hardware. * Design and implement scalable manufacturing processes for precision components and assemblies. * Develop process documentation and controls to ensure repeatability and yield improvement. * Partner with design, quality, and material management to ensure material compatibility and maintain approved materials list. * Support prototype builds and identifies opportunities for process improvement. * Evaluate material and process failure modes, perform root cause analysis, and drive mitigations. YOU MUST HAVE: * Bachelor's degree minimum * Minimum 4+ years of experience in advanced materials and process engineering role. * Due to Contractual requirements, must be a U.S. Person defined as, U.S. citizen permanent resident or green card holder, workers granted asylum or refugee status * Due to national security requirements imposed by the U.S. Government, candidates for this position must not be a People's Republic of China national or Russian national unless the candidate is also a U.S. citizen. WE VALUE: * Advanced degree in Material Science, Chemical Engineering, Mechanical Engineering, or related field * Experience with complex hardware systems (aerospace, optical, cryogenic, photonics, electronics) * Demonstrated ability to develop and scale processes from R&D to production. * Hands-on approach to problem solving and willingness to engage directly with R&D and production teams * Knowledge of failure analysis tools (SEM, XPS, etc.) * Proficiency in GD&T and process validation. * Six Sigma Black Belt Certification * Experience with quality inspections and vendor management for passive optics (lenses, prisms, optical fibers and connectors) and active optics (acousto-optic modulators, electro-optic modulators, lasers) * Experience with reliability testing of optical components and opto-mechanical systems * Experience with data analytics for hardware performance. * Ability to build strong relationships and effectively partner with others * Excellent organization, communication, and documentation skills * Self-motivated and capable of working independently with minimal supervision $127,000 - $158,000 a year Compensation & Benefits: Non-Incentive Eligible The pay range for this role is $127,000 - $158,000 annually. Actual compensation within this range may vary based on the candidate's skills, educational background, professional experience, and unique qualifications for the role. Quantinuum is the world leader in quantum computing. The company's quantum systems deliver the highest performance across all industry benchmarks. Quantinuum's over 650 employees, including 400+ scientists and engineers, across the US, UK, Germany, and Japan, are driving the quantum computing revolution. By uniting best-in-class software with high-fidelity hardware, our integrated full-stack approach is accelerating the path to practical quantum computing and scaling its impact across multiple industries. As we celebrate the International Year of Quantum, there has never been a more exciting time to be part of this rapidly evolving field. By joining Quantinuum, you'll be at the forefront of this transformative revolution, shaping the future of quantum computing, pushing the limits of technology, and making the impossible possible. What is in it for you? A competitive salary and innovative, game-changing work Flexible work schedule Employer subsidized health, dental, and vision insurance 401(k) match for student loan repayment benefit Equity, 401k retirement savings plan + 12 Paid holidays and generous vacation + sick time Paid parental leave Employee discounts Quantinuum is an equal opportunity employer. You will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, or veteran status. Know Your Rights: Workplace discrimination is illegal We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: $90/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Work in a collaborative environment to develop and implement manufacturing processes, procedures, and production layouts for assemblies, equipment installation, fabrication, and material handling. This entry-level role focuses on integrating advanced technologies (automation, robotics, CAM software, etc.) to improve efficiency, reduce cost, and enhance product quality. Creating and analyzing 3D model-based environments to optimize manufacturing processes and digital work instructions Defining operations procedures and build sequences using knowledge of materials and automated processes Evaluating equipment and tool performance (including IoT devices) and initiating corrective actions as needed Leveraging factory data to implement statistical process control and data analytics solutions Providing design input to enhance manufacturability and equipment utilization Requirements: Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education Entry-level position; ideal for candidates beginning their career in manufacturing or industrial engineering Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

360 IT Professionals is a Software Development Company based in Fremont, California that offers complete technology services in Mobile development, Web development, Cloud computing and IT staffing. Merging Information Technology skills in all its services and operations, the company caters to its globally positioned clients by providing dynamic feasible IT solutions. 360 IT Professionals work along with its clients to deliver high-performance results, based exclusively on the one of a kind requirement. Job Description We are looking to fill a position for Sr. process Engineer with at least 10 yrs. of relevant experience in [Project Management Practices. The key areas of focus and deliverables are: Cradle-to-grave process artifacts for Application Lifecycle Management, Knowledge Management, Asset Management, Change Management, Problem Management, and Incident Management Evaluation and gap analysis for Application Lifecycle Management, Knowledge Management, Asset Management, Change Management, Problem Management, and Incident Management effectiveness review and continuous improvement recommendations of the Off-boarding process available to supervisors in the Customer Service Portal To accomplish this, the Senior Process Engineer will: · Assess current in-scope processes and make additional recommendations for improvements related to efficiency · Make heavy use of available materials in the above mentioned areas as fodder for process engineering activities · Develop process maps · Identify associated process goals, and metrics for measurement of each goal, to ensure that process performance can be measured and quantitatively managed · Meet with any applicable stakeholders to capture data and information as necessary and with Chief Customer Officer approval · Draft, or facilitate preparation of, process flows and instructional materials in coordination with Communications team · Ensure process interface with dependent, or related, processes across the enterprise · Apply industry process engineering best practices to legacy and new processes Qualifications Three or more years' experience with Process Engineering techniques and models · Expert knowledge in designing and implementing processes and process assets and/or frameworks · Successful completed the Intermediate Concepts of CMMI course · Active Project Management Professional (PMP) An understanding of IT Service Management framework · 10+ years' experience with Project Management practices · ITIL certification a plus · Knowledge of large-scale process methodologies and frameworks in State government environments is a plus Additional Information Webcam interview is acceptable.

Candidate will have thorough knowledge of Digital Signal Processing (DSP) concepts including RF Comms, Synchronization, and high speed ADC and DAC systems. Candidate will have experience implementing DSP algorithms in hardware including: * Algorithm prototyping in MATLAB or similar language * Determining precision and dynamic range * Algorithm validation using hardware co-simulation or C/C++ bit true modeling * FPGA or ASIC implementation in Verilog or VHDL Candidate will have a demonstrated ability to support a project through all aspects of the design phase including system architecture, algorithm exploration and trade studies, design reviews, implementation, lab verification, and delivery. Candidate will have experience mentoring and providing oversight of DSP Engineers and/or implementation team. Clear written and verbal communication skills are required to support design team and customer meetings.

About Capella, an IonQ company Capella, an IonQ company, builds trusted space systems that deliver secure, rapid, and actionable Earth intelligence to amplify decision-making for allied partners. As the first U.S. company to launch and operate a commercial Synthetic Aperture Radar (SAR) constellation, Capella provides precise, high-resolution radar imagery in any condition-day or night, through clouds, smoke, and darkness. Capella is defining the future of space-based intelligence through a vertically integrated approach that spans spacecraft design, advanced radar payloads, manufacturing, automated tasking, and low-latency delivery of mission-ready data. Capella designs for the realities of modern defense and intelligence: speed, sovereignty, and resilience. Powered by IonQ, Capella is creating the world's first quantum-enabled Earth observation network-transforming how intelligence is delivered through innovation, speed, and trust. This next-generation architecture will provide governments and global partners with a decisive edge: the ability to see, decide, and act with confidence in any environment. What Makes Capella Unique? Capella, an IonQ company, spans national security, advanced sensing, and next-generation compute to deliver secure, mission-ready intelligence. Capella's culture is built on collaboration, rigorous engineering, and a shared commitment to delivering solutions that strengthens global stability and security. Team members work side-by-side with some of the most innovative minds in space systems, quantum-enabled technologies, and mission-critical operations. Capella values curiosity, resilience, and a willingness to tackle hard problems with precision and creativity. Capella welcomes and encourages applicants whose perspectives are historically underrepresented in technology, national security, and aerospace. No prior space experience is required. Diverse viewpoints strengthen Capella's ability to innovate and to deliver meaningful impact for partners worldwide. Capella Internship Program Capella's 10-week, in-person internship program (June 8-August 14, 2026) gives students hands-on experience in spacecraft development, operations, and geospatial technology. Interns work directly on meaningful projects while building technical skills, industry insight, and professional connections. The program includes mentorship, team engagement, and social events that support a balanced and collaborative experience. A stipend is provided to help with living expenses. About the Role Capella is seeking a Signal Processing Intern to join our Space Systems Engineering team in San Francisco, CA. As a Signal Processing Intern, you'll work on cutting-edge radar and remote sensing technologies that power Capella's high-resolution SAR (Synthetic Aperture Radar) constellation. This internship offers the opportunity to contribute to real-world research and development projects that advance the performance, automation, and scientific capability of Capella's radar data processing systems. You'll collaborate with experienced engineers and scientists on projects such as automatic target detection, radio frequency interference (RFI) analysis, and polarimetric SAR data analysis. Key Responsibilities: Depending on your interests and background, you may contribute to: Automatic target detection - supporting development of signal or image-based algorithms for identifying features or anomalies in radar imagery or RF data. Polarimetric analysis - exploring advanced methods to extract physical information from fully polarimetric SAR data. Supporting the development of tools, simulations, and visualizations to evaluate and validate new algorithms. Radar Calibration - supporting methods for ensuring scientific accuracy of data products. Preferred Qualifications Currently pursuing an M.S. or Ph.D., or a senior-year B.S. student in Electrical Engineering, Applied Physics, Computer Science, or a related field with a focus on signal or image processing or machine learning. Strong foundation in signal processing, remote sensing, or SAR concepts. Proficiency in one or more of the following: Python, MATLAB, NumPy/SciPy, PyTorch, or TensorFlow. Experience or coursework in SAR, RFI analysis, target detection, or polarimetry is a plus. Demonstrated ability to work independently, analyze complex datasets, and communicate results effectively. Passion for applying advanced signal processing to meaningful, real-world space applications Required Qualifications Currently attending a degree program and available to work full time for 10 weeks outside of the university academic term. In their penultimate academic year or returning to a degree program after completion of the internship. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Capella Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Compensation This internship will be a 40-hour a week commitment at the pay of $39 per hour. An allowance will also be provided to support living costs throughout the program. Equal Opportunity Statement Capella, an IonQ company is an equal opportunity employer, committed to creating a diverse and inclusive workplace, and upholding equitable hiring practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic under federal, state, or local law, including those with a criminal history, in a manner consistent with the requirements of applicable state and local laws, including the CA Fair Chance Initiative for Hiring Ordinance. We actively encourage members of recognized minorities, women, Veterans, and those with disabilities to apply, and we work to create a welcoming and supportive environment for all applicants throughout the interview process. If you need assistance or require an accommodation during the job application process, please notify *************************** To learn more about us, explore our site: ***************************** and follow us on X and LinkedIn to see our SAR imagery!

US Tech Solutions is a global staff augmentation firm providing a wide-range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit our website ************************ We are constantly on the lookout for professionals to fulfill the staffing needs of our clients, sets the correct expectation and thus becomes an accelerator in the mutual growth of the individual and the organization as well. Keeping the same intent in mind, we would like you to consider the job opening with US Tech Solutions that fits your expertise and skillset. Job Description Job Details: The Process Validation Engineer will ensure consistent implementation of corporate and regulatory compliance of validation activities within a pharmaceutical manufacturing facility. Primary functions of the role include : Oversees trial runs of a production or production- related process to substantiate the validity of the equipment/process and completion of all associated documentation. Works with project engineers and other support groups to have an in-depth understanding of new and existing equipment capabilities. Tests critical and key process parameters to assure reliability, quality and proper documentation to support the associated process and results. Develops a working knowledge within assigned area of responsibility of equipment function, design, and utilization. Presents updates, reports and presentations as necessary to the department, plant staff and regulatory agencies. Provides a key role in assuring the integrity of the manufacturing process. Qualifications Requirements : BS/BA degree required in engineering or an engineering related field Minimum of three years of experience, preferably in the pharmaceutical industry. Proven ability to understand equipment design and functions to assure appropriate utilization and validation of the process. Excellent multi-tasking skills and the ability to document details of the work performed are required. Advanced computer skills Additional Information Regards, Sneha Shrivastava ************

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Corona specializes in solving challenging and emerging drinking water problems across the US. As a small firm, we avoid unnecessary bureaucracy, and individuals benefit from working on a wide variety of projects. Staff are directly mentored by several of the nation's leading experts on drinking water quality. Our projects demand high-performance standards, but we strive to ensure all employees maintain a healthy work-life balance. As a Corona team member, you will work on fulfilling projects, your opinions and experience will be valued, and you will directly influence your career path. Get more details at ********************** Job Description Key Responsibilities: Function in a water process role Perform a variety of tasks to support engineering analyses, report production, and preliminary design Prepare basic calculations Conduct lab testing procedures Collect, organize, and evaluate data Organize and file project materials and references Qualifications No experience required. Current enrollment in ABET-accredited university in an Engineering program. All applicants must be able to complete pre-employment onboarding requirements (if selected) which may include any/all of the following: criminal/civil background check, drug screen, and motor vehicle records search, in compliance with any applicable laws and regulations. Additional Information JOB DETAILS: Compensation: Salary range: $30/hr - $40/hr, Employment Type: Part-time, hourly Job Type Intern Education: Senior in Bachelor's of Engineering or higher Experience: None Locations: Louisville, CO All your information will be kept confidential according to EEO guidelines

CRB's nearly 1,400 expert professionals drive innovative, life-changing and life-saving solutions for manufacturers in the life sciences and food and beverage industries. Our mission, vision, and core values put client satisfaction and employee experience at the center of everything we do. As an AEC firm, we proudly specialize in industries that inherently carry important social responsibility - we recognize our impact and influence in the communities we serve and pursue corporate responsibility through the lens of people, community, and planet. From oncology and rare disorders to COVID-19 or alternative proteins, our design and construction projects are pioneering solutions addressing important issues such as food scarcity and global health. Job Description We are actively seeking a Process Utilities Engineer Intern to join CRB. Join our firm for an internship journey where you'll dive into real-world project work, learn from industry leaders and fully immerse yourself in the CRB employee experience. This program is more than just an internship-it's an opportunity to grow, innovate, and make a tangible impact on how we do business. You'll have the chance to work hands-on with cutting-edge projects, collaborate with peers and industry leaders, and contribute your unique perspective to spark meaningful change. At CRB, we believe that learning should be as dynamic as it is engaging, and that work can be both challenging and enjoyable. Join us to expand your horizons, build lasting relationships, and experience what it truly means to be part of a team that's dedicated to innovation and excellence. How will I contribute? As a Process Utilities Engineer Intern, you will work under the direction of an assigned mentor to develop and implement project deliverables. The focus will be on the design and engineering of critical utility equipment and distribution (or collection) systems along with the supporting facility infrastructure required to support manufacturing operations. Typical tasks include execution of engineering calculations including heat transfer and hydraulic pressure drop calculations. * Typical tasks and deliverables include- * Block & Process Flow Diagrams * User Requirements Specifications * Equipment List * Equipment General Arrangements * Equipment Datasheets * Utility Summary * Piping and Instrumentation Diagrams * Assisting with development of conceptual designs and coordinating with the design team under direction of the project team lead. Systems Designed include: * Purified Water Generation, Storage and Distribution * Clean Steam Generation and Distribution * Compressed Air and Process Gas Generation and Distribution * Biological and Process Waste Collection, Inactivation and Neutralization * Clean in Place Systems * Bulk Chemical Storage and Distribution * Bulk Cryogenic Liquid Storage and Distribution * Coordinating with multiple disciplines and other internal and external team members (e.g., vendors, clients, and contractors). Qualifications * Pursuing a Bachelor's or Master's Degree in Mechanical Engineering, Chemical Engineering, BioProcess Engineering or Architectural Engineering * Experience with Microsoft Office suite (Outlook, Word, Excel, PowerPoint, OneNote) * Interest in the Food & Beverage or Life Sciences industry strongly preferred * Strong problem-solving skills with the ability to analyze complex data sets and develop actionable insights * Must be willing to communicate and collaborate with multiple disciplines and other internal and external stakeholders (vendors, clients and contractors) * Eagerness to learn about the AEC industry and apply academic knowledge to real-world engineering applications Preferred Qualifications * Working towards Fundamental of Engineering Exam registration or completion preferred * Familiarity with Engineering Software Application including computer aided drafting, process modeling and calculations programs * Familiarity with industry-specific regulations and standards within the AEC industry * Prior internship or co-op experience in Mechanical Engineering, Process Utilities Engineering or related field Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.