Product engineer jobs in Pine Hills, FL

Mechanical Design Engineer - Building Systems (Commercial / Residential / Healthcare) - Orlando/Melbourne, FL (Relocation Assistance) We are seeking a licensed Professional Engineer (PE) in Mechanical Engineering to join our building-systems design team, working on a variety of project types including commercial buildings, residential developments (multi-family) and healthcare/institutional facilities. You will lead mechanical (HVAC/plumbing/pumps/chilled water etc) design, mentor junior engineers/designers, and coordinate across disciplines to deliver projects from schematic through construction documents. Relocation support will be provided for the right candidate. Key Responsibilities Serve as the mechanical discipline lead on building systems projects (commercial, multi-family/residential, and healthcare). Perform mechanical engineering design: system sizing, load calculations, equipment selection, layouts, specification writing, coordination of HVAC, plumbing, pumps, cooling towers, etc. Prepare and review detailed construction documents (Revit, AutoCAD MEP) and ensure compliance with code (IBC, ASHRAE, Florida Building Code) and internal standards. Interface with architects, structural engineers, electrical/MEP designers, contractors, permitting jurisdictions and other project stakeholders. Mentor and guide junior mechanical engineers/designers; review their work; ensure quality control/QA. Participate in project scheduling, budgeting, staffing, resources allocation, and client interface as needed. Act as Engineer-of-Record (where applicable) and support permitting and certification processes. Stay current with mechanical design trends, building codes, simulation/modeling tools, and best practices. Provide relocation coordination and onboarding support for your move to Florida (if relocating). Required Qualifications Bachelor of Science in Mechanical Engineering (or equivalent) from an ABET-accredited institution. Active Professional Engineer (PE) license in Florida or ability to obtain within 6 months. At least 6-10 years' experience (depending on seniority) in mechanical design for building systems (commercial, residential/multi-family and/or healthcare preferred). Demonstrated experience with HVAC design (chilled water, pumps, cooling towers, DX systems, central plants), plumbing systems, and related mechanical building infrastructure. Proficiency with building-design tools such as Revit, AutoCAD MEP, and mechanical calculation software. Strong knowledge of building codes/standards (IBC, ASHRAE 90.1/62, Florida Building Code, etc). Excellent communication (verbal & written), client-facing skills, ability to work collaboratively across disciplines. Proven ability to lead and mentor a design team, manage workload and meet deadlines. Willingness to relocate to/within Florida (relocation assistance provided). Preferred Qualifications Experience in healthcare/institutional projects (hospitals, clinics, labs) would be a strong plus. Experience in residential/multi-family design or mixed-use projects. Experience leading projects end-to-end (from conceptual design through construction administration). Additional licenses (other states) or LEED credentials. Familiarity with site visits, commissioning or field-review experience. Compensation & Benefits Competitive base salary (depending on experience and seniority). Relocation assistance package (moving allowance, temporary housing, etc) for qualified relocation candidates. Bonus/incentive opportunities. Comprehensive benefits: medical, dental, vision, 401(k) with match, paid time off, professional development support, license/registration renewal assistance. Career growth opportunities into senior leadership roles. Why Join Us You'll work on diverse and impactful building-system projects across commercial, residential and healthcare sectors in a growing Florida market. Strong support for your relocation and transition to Florida. Collaborative, technically-oriented team environment where your PE status, mentoring and leadership are valued. Opportunity to make an impact on communities, design quality buildings, and grow your career.

Structural Project Engineer - Lead. Collaborate. Build What Lasts. If you're a Structural Engineer who thrives on leadership, client collaboration, and seeing your designs come to life, this role offers everything you've been looking for. As a Structural Project Engineer, you'll take ownership from concept through construction, working alongside in-house MEP, civil, and architectural teams-all under one roof. That means smoother coordination, smarter delivery, and a real opportunity to shape project outcomes. About the Firm A people-first, nationally recognized firm with a strong Florida presence. You'll lead impactful projects, gain direct client exposure, and design high-quality steel, concrete, and masonry structures across a wide mix of commercial and community developments. What You'll Do Lead structural design from concept to completion Serve as the primary structural contact for clients, ensuring clear and confident communication Oversee timelines, delegate effectively, and manage quality across deliverables Collaborate closely with multidisciplinary teams and lead project meetings Mentor junior engineers and contribute to a culture of learning and technical excellence What You'll Bring Professional Engineer (P.E.) license 7+ years of experience in building structure design and project delivery Proven success managing mid-to-large-scale structural projects Strong understanding of construction methods, value engineering, and project costs Excellent communication and coordination skills Why You'll Love It Collaborative, integrated design environment Clear career development and visible leadership pathways Competitive compensation and work-life balance in Orlando or Melbourne, FL If you're ready to lead complex projects and join a forward-thinking, multidisciplinary team, we'd love to connect. Apply today or reach out to start the conversation. About the Search: This role is being managed by Conrad Consulting, a recruitment agency specializing in the architecture, engineering, and construction (AEC) industry. With over 30 years of experience, we partner with respected firms to connect top civil and structural engineers with career-defining opportunities. Learn more about us and browse additional roles at ********************************

Job Title: Manufacturing Engineer - Electrical/Electronic Job Type: Full-Time Salary: $70,000 - $80,000 (based on experience) The Manufacturing Engineer reports to the Manufacturing Engineering Manager and provides the technical expertise needed to design, develop, and implement manufacturing systems, processes, and tooling that support high-quality and efficient plant production activities. Key Duties & Responsibilities Develop, optimize, and support manufacturing, test, and assembly processes. Design and maintain electrical/electronic test fixtures, jigs, and automated test equipment (ATE). Apply engineering tools, root-cause analysis, and statistical methods to enhance process capability and reduce defects. Troubleshoot process issues and drive corrective actions to improve performance. Create and maintain production-ready documentation, including procedures, work instructions, and specifications. Specify, source, and justify tools, equipment, and manufacturing supplies. Lead product or process improvement initiatives and collaborate with cross-functional engineering teams. Design and support electronic and test systems used for evaluation and construction of Mtron products. Perform additional duties as assigned. Supervisory Responsibilities: None. Knowledge, Skills & Abilities Strong understanding of electronic design related to test fixtures and systems. Hands-on engineering approach with active collaboration across multiple internal disciplines. Proficiency in Microsoft Word, Excel, and PowerPoint required. Experience with AutoCAD, SolidWorks, Minitab, and Microsoft AX preferred. Excellent written and verbal communication skills. Education & Experience Bachelor's degree in Electrical Engineering from an accredited university required. Preference given to candidates with 3+ years of engineering experience in a manufacturing environment. Must be able to handle ITAR-controlled documents without requiring an export license. Physical Requirements & Work Environment Ability to sit or stand for extended periods. Work primarily performed in an office and light-industrial environment. Minimal lifting required. Compensation & Benefits Salary: $70,000 - $80,000 (based on experience) Annual performance bonus tied to company and individual goals. Comprehensive medical, dental, and vision coverage. 401(k) retirement plan. Paid Time Off (PTO). Company-paid life insurance and short/long-term disability coverage. Opportunities for professional development, continuous training, and career growth. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance

Mercor is seeking experienced PyTorch experts who excel in extending and customizing the framework at the operator level. Ideal contributors are those who deeply understand PyTorch's dispatch system, ATen, autograd mechanics, and C++ extension interfaces. These contractors bridge research concepts and high-performance implementation, producing clear, maintainable operator definitions that integrate seamlessly into existing codebases. ### **2) Key Responsibilities** - Design and implement new PyTorch operators and tensor functions in C++/ATen. - Build and validate Python bindings with correct gradient propagation and test coverage. - Create “golden” reference implementations in eager mode for correctness validation. - Collaborate asynchronously with CUDA or systems engineers who handle low-level kernel optimization. - Profile, benchmark, and report performance trends at the operator and graph level. - Document assumptions, APIs, and performance metrics for reproducibility. ### **3) Ideal Qualifications** - Deep understanding of PyTorch internals (TensorIterator, dispatcher, autograd engine). - Strong background in C++17+ and template metaprogramming within PyTorch's ecosystem. - Experience authoring or extending PyTorch custom ops or backends. - Working knowledge of performance profiling tools and GPU/CPU interplay. - Strong written communication and ability to deliver well-documented, self-contained modules. - Prior open-source contributions to PyTorch, TorchInductor, Triton, or related projects are a plus. ### **4) More About the Opportunity** - Ideal for contractors who enjoy building clean, high-performance abstractions in deep learning frameworks. - Work is asynchronous, flexible, and outcome-oriented. - Collaborate with CUDA optimization specialists to integrate and validate kernels. - Projects may involve primitives used in state-of-the-art AI models and benchmarks. ### **5) Compensation & Contract Terms** - Typical range: **$100-$200/hour**, depending on experience and project scope. - Structured as an **independent contractor engagement**, not employment. - Payments for services rendered on a milestone or weekly invoice cadence. - Confidentiality and IP assignment agreements may apply. ### **6) Application Process** - Share a concise summary of your experience with PyTorch internals and systems-level programming. - Include links to open-source work, GitHub PRs, or sample operator implementations. - Provide hourly rate, availability, and relevant technical background. - Selected experts may complete a short, paid pilot module to demonstrate fit. ### **7) About Mercor** - **Mercor** connects top-tier independent professionals with leading AI labs and research organizations. - Contractors retain full control over their work, schedule, and deliverables. - Our engagements focus on high-skill, high-autonomy technical work across AI systems and optimization

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. We are looking for you to join our team as a Manufacturing Engineer based out of Apopka, FL. This role has daily collaboration with cross-functional teams such as Manufacturing Operations, Quality Assurance, Production Planning, Operations Program Management, and various strategic teams across the Mission Systems enterprise. What You'll Get to Do: Accountable for process technical ownership, optimization, and disposition, including top-level and subassemblies. Accountable for the maintenance of manufacturing instruction within the site MES, work product defined procedures, and work instructions. Manufacturing capacity planning support and optimization for responsible production lines. Provides solutions to a variety of technical problems of increasing scope and complexity as assigned. Digital Tread initiatives support. Accountable for process control, quality, safety, delivery, and rework metrics for responsible production lines. Accountable for manufacturing tooling drawing release via the site product life-cycle system. Support of manufacturing proposals & basis-of-estimates (BOEs) for potential contracts. Competency General frequent use and application of technical standards, principles, theories, concepts, and techniques. Passion and relentless drive for achieving manufacturing and operational results. Root cause problem-solving and continuous improvement. Knowledge of Failure Mode and Effects Analysis (FMEA). Knowledge of Process control methods (SPC/control charts). Knowledge of Process Capability Analysis (Cp, Cpk, Pp, Ppk). Broad technical experience in value stream manufacturing operations. Knowledge of Risk Management identification and mitigation. Action-oriented with the ability to make quick decisions in response to changing conditions. Solid presentation skills with the ability to effectively communicate thoughts and ideas. Commitment to ethics and compliance *******NOTE: This is a 2nd Shift role with a 10% differential******* Basic Qualifications Manufacturing Engineer Bachelor's degree in an applicable Engineering discipline or other technical disciplines with 2 years related experience in manufacturing or engineering, OR a master's degree with 0 years Experience with or knowledge of a Manufacturing Execution System (MES) or production/shop floor systems Experience with process development, process flow, tooling, and manufacturing methods. Experience in reading, interpreting, and applying engineering drawings, specifications, test procedures, and mechanical layouts. Must be able to obtain and maintain a DOD security clearance US Citizenship required Preferred Qualifications Manufacturing Engineer Aerospace or defense product experience: EOIR, LASER, and imaging Experience with a Manufacturing Execution System (MES) Teamcenter Mission Product Life-cycle Management experience SAP S/4HANA Cloud ERP system experience Proficiency in CAD Software (AutoCAD, SolidWorks, Pro/ENGINEER, Siemens NX) Digital Manufacturing/Manufacturing Distributed Network (MDN) implementation experience Advanced knowledge of MS Office (Teams, Word, Excel, PowerPoint) MANUMS Primary Level Salary Range: $70,200.00 - $105,400.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

“We Power the Magic!” That's our motto at Disney Experiences Technology (DXT). Our team creates world-class immersive digital experiences for the Company's premier vacation brands. We deliver experiences to consumers through our Disney's Parks & Resorts worldwide, Disney Cruise Lines, and Disney Vacation Club. We are responsible for the end-to-end digital and physical Guest experience for all technology & digitally led initiatives across the Attractions & Entertainment, Food & Beverage, Resorts & Transportation and Merchandise lines of business, as well as other initiatives such as Hey, Disney! If you're passionate about designing and engineering complex, large-scale data products focused on how we know our Guests, come join us! We're seeking a Lead Data Product Engineer over our Guest360 profile to architect, build, and optimize enterprise-grade data solutions. You'll own the full lifecycle of data products related to our Guest profile, from ingestion and transformation to architecture and enablement, while ensuring reliability and scalability. As a technical lead, you'll shape data product design, define contracts and schemas, and partner closely with data source owners, engineers, architects, and end-user teams. This is not a pure coding role, instead, you will engineer the product layer of data, designing assets, writing queries, and translating complex source data into consumable products that data engineers implement at scale. You will sit within Data Products & Platforms for Disney Experiences, collaborating with internal teams and technical leaders across the company. What You'll Do: Architect and deliver enterprise data models, schemas, and contracts to support multi-source ingestion, transformation, and consumption at scale. Own the full product lifecycle for data domains, including design, versioning, governance, and deprecation. Define and evolve technical strategies for high-volume operational and analytical workloads. Act as the data and technical subject matter expert, covering not only your domain and products but also the enablement capabilities of our modern data ecosystem with partners. Partner with architects and data engineers to design and implement scalable, secure, high-throughput pipelines and consumption-ready data products. Translate business requirements into technical specifications and engineering deliverables. Perform deep reviews and gap assessments of existing data flows, modernizing legacy pipelines into modern cloud-native ecosystems. Manage technical acceptance criteria, SLAs, timelines, and cost controls for data products. Represent the data product engineering function in executive forums, advocating for technical excellence and data-driven strategy. Required Qualifications & Skills: 7+ years designing and delivering large-scale data products, with proven experience leading data solutions and/or engineering teams. Bachelor's degree in Computer Science, Information Systems, or related field-or equivalent professional experience Hands-on expertise in data product management or data engineering, especially in complex business and operational domains. Advanced skills in data modeling and documentation (conceptual, logical, physical), driving solutions end-to-end: discovery to deployed pipelines supporting BI, analytics, and AI/ML. Deep technical fluency with data engineering concepts and platforms (AWS: S3, Lambda, Step Functions, Glue), data platforms (Snowflake), governance (data contracts), transformation and orchestration (dbt, Airflow), and streaming/event technologies (Kinesis, Pub/Sub patterns, Kafka). Strong understanding of batch and real-time architectures, including event-driven and streaming solutions. Proven ability to partner and influence across technical and business teams; clear, concise communicator who can translate complexity. Recognized technical authority in data product engineering practices, defining best-in-class methods and coaching others on process and execution. #DISNEYTECH Job Posting Segment: DX Technology Job Posting Primary Business: Emerging Tech & Data Primary Job Posting Category: Data Engineering Employment Type: Full time Primary City, State, Region, Postal Code: Orlando, FL, USA Alternate City, State, Region, Postal Code: Date Posted: 2025-10-09

Are you ready for what's next? Come explore opportunities within Brunswick, a global marine leader committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond. Brunswick believes “Next Never Rests™,” and we offer a variety of exciting careers and growth opportunities within united teams defining the future of marine recreation. Innovation is the heart of Brunswick. See how your contributions will help transform vision into reality: Position Overview: As part of the talented Brunswick Boat Group Technology Center team, you will be responsible for the engineering and integration of mechanical and propulsion system designs for all Brunswick Boat Group Technology Center programs. This will include the use of Computer Aided Engineering (CAE) tools to generate 3D surface models for components and layout of the mechanical systems. At Brunswick, we have passion for our work and a distinct ability to deliver. Essential Functions: Complete engineering of assigned boat systems including fuel system, fresh water, raw water, black water, A/C, hydraulic steering system, power generation, water maker, refrigeration system, air heater system, drainage, etc. Complete engineering of purchased parts and hardware development. Lead internal and external engineering reviews to ensure systems meet performance expectations. Provide accurate material and component specification for the sourcing of new and replacement components. Work with suppliers on the development of new systems and components to ensure continuous improvement in the quality and value of our boat systems. Ensure that new designs and components meet the cost, performance and functional requirements on new boat programs. Generate engineering drawings for new designs and approve all documentation prior to release. Generate, review, and approve engineering change notices (ECNs) as required. Participate in manufacturing integration activities to ensure successful launches of new products and technologies as well as continuous improvement activities. Support manufacturing and customer service on issues resolution. Ensure that designs have been fully validated and that they meet necessary system specifications and performance requirements/. Utilize warranty data to identify issues related to mechanical systems for mitigation purposes. Provide technical evaluations and reports on issues for customer service and field problems. Ensure compliance with all necessary industry, domestic, and international government regulations. Ensure that all materials used in the manufacture of finished products have been tested and approved for quality and reliability. Perform final system design verification tests as needed. Ensure timely and adequate completion of all applicable phases of project Apply relevant voice of the customer and systems engineering input to designs Must be willing to travel (minimum 10%) Diversity of thought and experiences is fundamental when imagining the unimaginable. Certain skillsets/experiences are necessary; however, others can be developed along the way. Required Qualifications: Bachelor Degree in Mechanical Engineering, Naval Architecture, Marine Engineering, or related discipline Consideration will be given for candidates with significant work experience in lieu of education requirements 3-5 years experience in marine product design preferred with knowledge of production processes. Computer Aided Design experience required (Siemens NX preferred and/or experience with SolidWorks, Catia, Creo or Pro-E) 3-D solid and free-surface modelling skills required Boating experience is desired Enjoys working “hands-on” as needed to get the job done Team-first attitude and ability to enhance the current PD&E culture Lean Six Sigma certification or experience is a plus Commitment to quality and standards that are accepted by the industry Must interface well with other employee's and departments throughout Brunswick as well as outside vendors, dealers and retail customers Must be able to work extra hours required to assume timely completion of critical projects Proficiency in all Microsoft office applications Problem solving and decision-making ability. Working Conditions: While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; and toxic or caustic chemicals. The noise level in the work environment is usually moderate. While performing the duties of this job, the employee is frequently required to stand, walk, and sit. The employee is occasionally required to use hands to handle or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; and toxic or caustic chemicals. The noise level in the work environment is usually moderate. The anticipated pay range for this position is $69,000 to $110,000 annually. The actual base pay offered will vary depending on multiple factors including job-related knowledge/skills, relevant experience, business needs, and geographic location. In addition to base pay, this position is eligible for an annual discretionary bonus. At Brunswick, it is not typical for an individual to be hired at or near the top end of the salary range for their role. Compensation decisions are dependent upon the specifics of the candidate's qualifications and the business context. This position is eligible to participate in Brunswick's comprehensive and high-quality benefits offerings, including medical, dental, vision, paid vacation, 401k (up to 4% match), Health Savings Account (with company contribution), wellbeing program, product purchase discounts and much more. Details about our benefits can be found here. Why Brunswick: Whatever tomorrow brings, we'll be at the leading edge. As the clear leader in the marine industry, we're committed to our values and supporting our exceptional people. We offer valuable benefits including a competitive 401(k) plan with company match, health benefits, paid time off, a robust Wellness Program, and much more. In addition, we're proud of being recognized for making a splash with numerous awards! About Brunswick Boat Group Brunswick Boat Group is home to a diverse portfolio of iconic marine brands, including Bayliner, Boston Whaler, Crestliner, Cypress Cay, Harris, Heyday, Lowe, Lund, Navan, Princecraft, Protector, Quicksilver, Rayglass, Sea Ray, Spartan, Thunder Jet, and Uttern. Each brand carries a legacy of innovation, craftsmanship, and performance that has shaped the boating industry worldwide. Across our fiberglass and aluminum manufacturing facilities, our team members are the driving force behind our success. We foster a culture rooted in safety, integrity, continuous improvement, and personal growth. Whether you're building unsinkable legends, pioneering wake sports, or crafting fishing and pontoon boats trusted for generations, you'll be part of a united team committed to delivering exceptional experiences on the water. Next is Now! We value growth and development, recognizing that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Brunswick is an Equal Opportunity Employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other characteristic protected by federal, state, or local law. Diversity of experience and skills combined with passion is key to innovation and inspiration and we encourage individuals from all backgrounds to apply. If you require accommodation during the application or interview process, please contact ****************************** for support. For more information about EEO laws, - click here Brunswick and Workday Privacy Policies Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: ****************************** or ************. All job offers will come to you via the candidate portal you create when applying through a posted position through https:///************************** If you are ever unsure about what is being required of you during the application process or its source, please contact HR Shared Services at ************ or ******************************. #Brunswick Corporation

You will be the Photolithography/Thin Film Coating Manufacturing Engineer for Lockheed Martin Missiles and Fire Control, working in the Optical Components Center (OCC) in Orlando, FL. Our team is responsible for designing, developing, and supporting the production life-cycle of electromagnetic grids and thin film coatings for various optical systems, and we're looking for a talented Manufacturing Engineer to join our team. This position is for first shift, Tuesday to Friday (4/10B) What You Will Be Doing: As the Photolithography/Thin Film Coating Manufacturing Engineer, you will be responsible for supporting manufacturing processes of optics, with an emphasis on photolithography and/or thin film coatings. You will design and develop optical coatings to be deposited on lenses and windows, and define the parameters of equipment for the processes. You will also perform characterization of the deposited coatings and analyze data, and provide technical guidance to operators. Your responsibilities will include: • Supporting manufacturing processes of optics, with an emphasis on photolithography and/or thin film coatings • Designing and developing optical coatings to be deposited on lenses and windows • Defining the parameters of equipment for the processes and defining maintenance items for supporting the equipment • Performing characterization of the deposited coatings and analyzing data • Providing technical guidance to operators and developing and managing work instructions • Investigating defective hardware and implementing corrective actions to prevent defects from occurring • Driving the adoption of new technologies to improve efficiency and quality • Support manufacturing processes of optics, with an emphasis on photolithography and/or thin film coatings. • Design and develop the optical coatings to be deposited on lenses and windows. • Define the parameters of equipment for the processes and define the maintenance items for supporting the equipment for product sustainment. • Perform characterization of the deposited coatings and analyze data. • Provide technical guidance to operators and effectively communicate the processes in work instructions. Develop and manage work instructions. • Investigate defective hardware and provide next steps to get the hardware back into production and implement corrective actions that will prevent defect from occurring. • Drive the adoption of new technologies (capital investments, automation, robotics) to improve efficiency and quality. Why Join Us We're looking for a highly skilled and motivated Photolithography/Thin Film Coating Manufacturing Engineer to join our team. As a talented and innovative engineer, you will have the opportunity to work on small-scale challenges that make a significant impact to the customer. If you're passionate about photolithography and thin film coating, and have experience in manufacturing engineering, we encourage you to apply. This role offers a unique opportunity to work with a dynamic team and develop your skills in a fast-paced and supportive environment, with opportunities for professional growth and development. Note: This position is for first shift, Tuesday to Friday (4/10B), and is located in Orlando, FL. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Lea Further Information About This Opportunity: This position is in Orlando. Discover more about our Orlando, Florida location. Basic Qualifications Bachelor's or Master's degree in Materials Science, Chemical Engineering, Electrical Engineering, Mechanical Engineering, Physics, or related discipline from an accredited college. Must have skills, experience and/or course work in one OR more of the following categories: • Thin film • Coatings • Photolithography • Optics Experience or basic training in at least one programming language for data analysis: • Python • Matlab • Excel VBA Microsoft Office software experience Must be a U.S. citizen and have the ability to obtain a security clearance. Desired skills Breadth in skills, experience and/or course work across multiple disciplines of manufacturing engineering is strongly desired. Examples include but not limited to: writing/reviewing work instructions (or standard operating procedure manuals), data analytics, automation, mechanical design of equipment or supporting tools, maintaining the product lifecycle, and working in a clean room environment. Candidates with thin film coating specialization will have skills and/or experience in the design, manufacturing (physical vapor deposition, ion beam sputtering, chemical vapor deposition), and metrology of optical thin film coatings. Candidates with photolithography specialization will have skills and/or experience with semiconductor fabrication processes (wafer preparation, coating, exposure, development, and etching) and with photolithography equipment (steppers, scanners, and track system). Knowledge of process control techniques, including statistical process control (SPC), control charts, and yield enhancement. Having strong time management skills (ability to adjust priorities), ability to work independently, and able to communicate effectively with cross-functional teams are critical skills to support on the floor production. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. * At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Other Important Information By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to work remotely Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedule Information Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Security Clearance Information This position requires a government security clearance, you must be a US Citizen for consideration. Pay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $67,000 - $117,990. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. (Washington state applicants only) Non-represented full-time employees: accrue at least 10 hours per month of Paid Time Off (PTO) to be used for incidental absences and other reasons; receive at least 90 hours for holidays. Represented full time employees accrue 6.67 hours of Vacation per month; accrue up to 52 hours of sick leave annually; receive at least 96 hours for holidays. PTO, Vacation, sick leave, and holiday hours are prorated based on start date during the calendar year. This position is incentive plan eligible. Pay Rate: The annual base salary range for this position in most major metropolitan areas in California, Massachusetts, and New York is $77,000 - $133,400. For states not referenced above, the salary range for this position will reflect the candidate's final work location. Please note that the salary information is a general guideline only. Lockheed Martin considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. This position is incentive plan eligible.

Job Description We are looking for motivated mechanical engineers to develop cutting-edge products for our military, governmental, and commercial customers. Our group of mechanical engineers drive products from conception to production including product ideation, research, laboratory/prototype builds, experimental testing, and design for manufacturing. We do not hire discrete design, test, and analysis engineers - our engineers work across all of these roles. This is a hands-on job which will see you design something in CAD, perform FEA/CFD/hand analysis on it, have it fabricated, and physically test and iterate it yourself. As an engineer, you'll have the opportunity to lead your own projects and research. Your creativity and interest determine the next technology you investigate. We design and manufacture a wide variety of products and perform R&D on an even wider variety. Some of our ongoing research efforts that you may be involved with in this role include: HVAC systems for highly-demanding military applications, diesel engine component design and electrification, advanced robotics and additive manufacturing, design and fabrication of ZnS windows for hypersonic vehicles, laser weapon cooling systems, and much more. You will have the opportunity to learn every day, and no two days will be the same. This position may include proposal writing for your next idea, analytical calculations, computational simulations (CFD and FEA), laboratory build and testing, and direct customer interfacing. Company Expectations We are looking for people that fit our values problem solvers; people that can innovate solutions to real-world problems intellectual curiosity and passion for engineering internally motivated; we do not micromanage highly-agile; our work crosses many boundaries, and no two days are alike Position Requirements BSME +3 years of experience OR MSME from an Accredited University GPA not less than 3.3 at all degree levels US Citizenship required due to strict ITAR regulations Strong understanding of mechanical engineering fundamentals Interest in hands-on engineering work in one or more focus areas of Mainstream Prior experience in design, test, and/or analysis with an interest in learning more about each ANSYS experience with willingness to verify design through test Knowledge of testing equipment and setups is a plus CFD/FEA modeling (ANSYS/FLUENT) experience is a plus Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. Job Posted by ApplicantPro

About the Role Florida Orlando * Country: UNITED STATES OF AMERICA * State/Province/County: North Carolina * City: Charlotte Company Siemens Energy, Inc. Organization Gas Services Business Unit Central Full / Part time Full-time Experience Level Experienced Professional A Snapshot of your Day: We're looking for passionate Operations Engineer to join the 5F Product Engineering team in Orlando. As an Operations Engineer, your day centers around operational data analysis, testing preparation, engine testing and resolving technical issues for 5000F product. The operational engineer is the cognizant engineer for Gas Turbine new unit and Modernizations & Upgrade products for SGT6-5000F. The scope of responsibility extends to coordinating support from all other organizations directed towards development, negotiations and implementations for the new unit and Modernizations and Upgrade (M&U) product line. How You'll Make an Impact * Testing preparation and field validation including testing at test-bed and customer sites. * Lead and facilitate fast resolution of technical issues of sold GTs. This includes evaluation of a root cause, solution development and implementation followed by verification/validation. * Operational data analysis of new units to identify trends and potential issues * Technical definition of Gas Turbine (GT) Operation Modes (e.g. Load Gradients, Grid-Code, Additional Features, Control System) * Close interaction and alignment with GT Module Engineering, Auxiliary/ controls and BOP. * Creation of related technical documentation * Analysis of related technical risks * Support of offering (Negotiation) process for GT projects with focus on GT operation * Support of COE projects for first time applications * 10-25% travel is expected in support of customer meetings, site walk-downs, vendor support, testing, and product implementation. What You Bring * Bachelor's degree or equivalent in Mechanical or Aerospace Engineering from an accredited university/college. Master's degree is a plus. * Minimum 8+ years of successful experience in a gas turbine development environment with extensive understanding of gas turbine design, operational aspects & improvement levers. Advanced degree may be substituted for experience, where applicable. * Strong communications skills, network building, and solid engineering background. Good program management skills is preferred. * Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. About the Team Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ******************************************** Rewards * Career growth and development opportunities * Supportive work culture * Company paid Health and wellness benefits * Paid Time Off and paid holidays * 401K savings plan with company match * Family building benefits * Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: Up to $40/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Analyze and interpret electrical, electromechanical, and cable schematics for development and production Create, update, and publish clear and efficient assembly work instructions Identify and maintain required tooling for production Investigate technical issues and support manufacturing operators with timely solutions Collaborate with cross-functional teams to resolve manufacturing problems and implement corrective actions Contribute to lean manufacturing initiatives to enhance efficiency and reduce waste Provide design input to optimize manufacturability and equipment usage Partner with subject matter experts to implement process improvements Follow established manufacturing engineering processes and procedures Requirements: Bachelor's degree in a related discipline or equivalent experience Ability to interpret electrical schematics and diagrams High attention to detail, especially with electrical and electromechanical assemblies Proficient in Microsoft Office (Word, PowerPoint, Excel, Publisher) Strong interpersonal and communication skills Self-motivated with a proven ability to manage multiple tasks and deliver results Effective team player with excellent problem-solving abilities Familiarity with SAP (Qnotes, Routings, Bills of Material) or similar systems Understanding of design for manufacturing (DFM) principles Experience applying Lean manufacturing techniques and implementing process improvements Exposure to electrical engineering principles; familiarity with Zuken is a plus Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Join Omega Medical Imaging - Innovators in Interventional Imaging Manufacturing Engineer (Process & NPI) - Class II X-Ray Systems Employment Type: Full-Time | On-site, Monday-Friday, 8:00 am - 5:00 pm Omega is a U.S.-based manufacturer of the world's only AI-powered Region of Interest (ROI) X-ray system for interventional imaging (fluoro & cine). Our technology is not just innovative, it's transformative, delivering up to 84% additional radiation reduction for patients and everyone in the procedure room, as proven by peer-reviewed studies. We proudly design, manufacture, and support our solutions in-house, fostering a collaborative, mission-driven culture where every team member plays a role in helping us shape the future of medical imaging. We believe ROI-based radiation reduction should become the standard of care. We're not just designing and selling solutions -we're starting a movement.About the Role: We build high-mix/low-volume interventional X-ray systems that combine precision mechatronics, metal fabrication, complex cabling, coatings, and embedded/software loading. We are hiring 2 experienced, entrepreneurial Manufacturing Engineers to be the hands-on bridge between Product Engineering and the factory - owning stable, compliant, and scalable production. Each person will lead one focus, but collaborate daily: Process & Production Systems: own routings, toolings/fixtures, line setup, and continuous improvement. NPI & Design Transfer: own transfer from design outputs to production specifications, pilot builds, and validation. Key Responsibilities Translate design outputs into clear, visual, bilingual (EN/ES) work instructions, checklists, and travelers that meet 21 CFR 820 / QMSR and ISO 13485. Drive DFM/DFA and manufacturability feedback in design reviews; run PFMEAs and risk mitigations that reduce defects and touch‑time. Build and optimize routings, BOM structures, and master data in our MRP/ERP; create kits, work centers, and capacity/load rules that fit high‑mix/low‑volume flow. Lead line setup for mechanical, electrical, and motion assemblies; specify fixtures, torque tools, ESD/grounding, test stations, and poka‑yoke. Plan and execute validations (IQ/OQ/PQ) and process characterizations; establish critical process parameters and release criteria. Troubleshoot builds in real time with technicians; drive RCCA/CAPA and support SCARs when supplier issues arise. Own ECOs and document control in partnership with Quality; keep DHF/DMR/Device Master Records and travelers in sync. Reduce NCMRs and rework through standard work, takt‑aligned layouts, 5S/visual management, and lean experiments. Coordinate incoming inspection criteria and gauge selection; implement acceptance sampling and first‑article requirements. Support pilot builds, FAIs, and readiness reviews for each transfer; define exit criteria and ramp plans to steady state. Champion safety and EHS practices across paint/coatings, metal shop, cable assembly, and system integration areas. Communicate across a multi‑lingual floor, coach technicians and peers with high EQ and respect. Qualifications & Skills Bachelor's in mechanical/manufacturing/industrial/electrical engineering or equivalent practical experience. 4-10 years hands‑on manufacturing engineering in regulated electromechanical products (medical device preferred). Proficiency with MRP/ERP (e.g., routings, BOMs, ECOs, work centers, capacity planning). Strong CAD literacy for reading models/drawings; comfortable creating simple fixtures and markups. Demonstrated skill writing crisp, visual work instructions and checklists; bilingual English/Spanish a plus. Working knowledge of FDA QSR / QMSR and ISO 13485; experience with IQ/OQ/PQ and CAPA. Practical lean toolkit (standard work, takt/flow in HMLV, 5S, SMED, mistake‑proofing, value stream mapping). Excellent troubleshooting and collaboration skills; calm under pressure, high emotional intelligence. Bonus: cable/harness build/test, coatings/paint processes, motion control/servo tuning, PLC or embedded load & test. Ability to lift to 35 lbs. Why Join Omega? Be part of a pioneering team pushing the boundaries of AI medical imaging Thrive in a fast-paced, demanding, entrepreneurial environment with the opportunity to have an impact Enjoy a workplace rooted in accountability, collaboration, integrity, and excellence What We Offer Competitive base salary PTO and paid holidays 401(k) with Safe Harbor company match Tuition reimbursement Medical, dental, vision, disability, and life insurance Health Savings Account (HSA) with employer match Ready to Make a Difference? Apply today and help us transform the future of medical imaging. Omega Medical Imaging, LLC is an Equal Opportunity Employer (EOE) and Drug-Free Workplace (DFW). Must be legally authorized to work in the U.S., sponsorship not available.

Prior experience in a Boat/Marine Manufacturing or similar environment is Highly Preferred Everglades Boats is an industry leader in premium offshore fishing boats. Founded in 1997, Everglades provides the ultimate choice for discerning boat owners and knowledgeable big-water anglers. Everglades is a high-end, refined brand that makes a personal statement about the status and savvy of its owner by applying best-in-class fishing amenities, premium-grade materials, and a highly-refined fit and finish. Widely recognized and respected in the industry for its hull performance and ride, Everglades patented RAMPCAP hulls are found throughout its model lineup. Receiving numerous industry awards and an unparalleled reputation for superior performance, Everglades recruits and retains the best talent in the industry. Job Summary: As a Manufacturing Engineer, you will play a critical role in the design, implementation, and improvement of manufacturing processes for our boat production line. You will work closely with cross-functional teams to ensure the highest standards of quality, efficiency, and safety are met. This position offers progressive levels of responsibility, with Level 3 representing the highest level of expertise and leadership within the role. Level 1: Manufacturing Engineer I Responsibilities: Assist in the development and optimization of manufacturing processes. Participate in the design and layout of production workstations and assembly lines. Support the implementation of Lean Manufacturing and continuous improvement initiatives. Conduct time studies and workflow analysis to identify areas for efficiency improvement. Collaborate with the quality assurance team to ensure product standards are met. Provide technical support to production staff and troubleshoot manufacturing issues. Maintain accurate documentation of processes, procedures, and work instructions. Qualifications: Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related field. 0-2 years of experience in a manufacturing environment, preferably in boat manufacturing. Basic knowledge of Lean Manufacturing principles. Proficiency in CAD software (AutoCAD, SolidWorks, etc.); Rhino 3D experience preferred. Exposure to Computer-Aided Manufacturing (CAM) software (e.g., Mastercam, Fusion 360, RhinoCAM) preferred. Familiarity with Microsoft Office Suite. Exposure to ERP systems is a plus. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Level 2: Manufacturing Engineer II Responsibilities: Lead process improvement projects and implement Lean Manufacturing techniques. Develop and refine manufacturing processes to enhance productivity and reduce waste. Analyze production data and implement corrective actions to address performance issues. Design and validate tooling, fixtures, and equipment used in the production process. Train and mentor production staff on new processes and equipment. Collaborate with design and engineering teams to ensure manufacturability of new products. Coordinate with suppliers to ensure the availability of quality materials and components. Qualifications: Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related field. 2-5 years of experience in a manufacturing environment, preferably in boat manufacturing. Proven experience in process improvement and project management. Advanced knowledge of Lean Manufacturing principles and Six Sigma methodologies. Proficiency in Rhino 3D (required) with demonstrated ability to design, modify, and analyze parts and assemblies. Strong working knowledge of AutoCAD, SolidWorks, or equivalent CAD tools. Proficiency with CAM software (e.g., Mastercam, Fusion 360, RhinoCAM) to support toolpath generation and machining processes. Proficiency in ERP systems for production planning and materials management. Ability to create or modify simple scripts, macros, or parametric models within CAD software to streamline repetitive tasks. Strong leadership and project management skills. Excellent problem-solving abilities and attention to detail. Level 3: Senior Manufacturing Engineer Responsibilities: Lead and manage complex manufacturing projects from concept to implementation. Develop strategic plans to enhance manufacturing capabilities and capacity. Drive continuous improvement initiatives and foster a culture of operational excellence. Evaluate and implement advanced manufacturing technologies and automation. Collaborate with senior management to align manufacturing strategies with business goals. Provide technical expertise and guidance to engineering and production teams. Lead root cause analysis and corrective actions for complex manufacturing issues. Develop and manage budgets for manufacturing projects and initiatives. Qualifications: Bachelor's or Master's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, or a related field. 5+ years of experience in a manufacturing environment, preferably in boat manufacturing. Extensive experience in process improvement, project management, and team leadership. In-depth knowledge of Lean Manufacturing, Six Sigma, and other advanced manufacturing methodologies. Expert-level proficiency in Rhino 3D (required) with ability to drive parametric modeling, advanced surfacing, and integration with CAM workflows. Deep experience with AutoCAD and other CAD/CAM platforms, including generating production-ready drawings and tool paths. Advanced proficiency in CAM software (e.g., Mastercam, Fusion 360, RhinoCAM), including optimization of machining strategies for composite and metal components. Strong ERP and PLM system experience, including system optimization and integration with engineering workflows. Experience with programming or automation tools (e.g., Python, Grasshopper for Rhino, or VBA macros) to enhance design efficiency and data transfer. Exceptional leadership, communication, and interpersonal skills. Strong strategic thinking and problem-solving abilities. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to communicate with others both verbally and in writing. Constantly operates a computer, phone, and other related office machinery. Regularly required to sit; occasionally required to stand/walk/move about the office and factory. Occasionally must lift and/or move up to 35 pounds. Will be required to wear appropriate PPE if moving about the production areas. Work Environment: While most duties will be in an office environment, the employee may occasionally be exposed to fumes or airborne particles and moving mechanical parts when moving through production areas. Noise level in the production areas is moderate to loud and non-climate controlled. Everglades Boats is a drug free workplace, and as such conducts pre-employment drug screening upon a conditional offer of employment. Everglades Boats is an Equal Opportunity Employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Manufacturing Engineer - Composites Vaya Space is a privately owned space and defense company headquartered on Floridas Space Coast. We are advancing patented vortex-hybrid engine technology to deliver propulsion systems that meet the highest standards of safety, affordability, and sustainability. In the commercial market, our Dauntlesslaunch vehicle provides reliable and cost-effective access to orbit. In defense, our hybrid propulsion systems support next-generation tactical, hypersonic, and missile defense applications. In this role you will facilitate and optimize design and production of Launch Vehicle and Missile Engine composites items for a high-growth production environment, ensuring standard manufacturing principles are practiced meeting stringent deadlines. This position will work closely and develop strong relationships with all engineering disciplines, technicians, and subject matter experts across a range of departments to enable effective integration and testing the launch vehicle. We are a fast-paced, mission-driven team tackling some of the hardest problems in aerospace. Success at Vaya requires personal leadership, strong technical skills, and meticulous attention to detail. Every team member contributes across disciplines, stepping up where needed to drive innovation forward. If you want to make an impact and help shape the future of space and defense, Vaya Space is the place to do it. Travel Required Up to 10% Required Security Clearance None (ITAR Eligible) Essential Duties and Responsibilities Work with design engineers to evaluate designs for manufacturability and test requirements. Work with Technicians to develop work instructions to clearly define manufacturing process, develop training materials, and train technicians in processes. Design tooling, jigs, and fixtures to support composite parts manufacturing. Preparation of detail design data packs including laminating books. Develop and document processes for composite filament winding and hand layups. Design of proper material handling, packaging, and labeling to protect and identify hardware throughout the build and test process. Interaction with structural analysts to ensure performance objectives are met. Provide hands-on engineering support to hardware prototype development and testing. Directly support testing operations and efforts, gaining opportunities to influence designs, improve processes and increase reliability. Engage with design engineers to review and approve part and tooling assemblies, updating, and offering input based on improved Design for Manufacturing (DfM) concepts or solutions. Research and coordinate implementation of upgraded processes and designs to take advantage of new capabilities and technology advancements. Continuous development of design methodologies and best practices. Qualifications Bachelors degree or equivalent in Mechanical Engineering, Aerospace Engineering, Mechatronics Engineering, or another relevant engineering discipline 4+ years experience as a Manufacturing / Production / Process Engineer ideally for electromechanical systems Sound working knowledge of composite design and manufacturing processes. Practical experience with composite part production and testing. Proven experience in an industrial environment for the delivery from concept to manufacture of high-performance composite components and assemblies. Proficient user of CAD for composite design definition Ability to manage multiple tasks in parallel with changeable priorities. Demonstratable experience for the development of multiple composite design solutions for a diverse set of applications. Familiarity with industry standards and references (e.g., MIL-HDBK-5/17, ECSS-E-HB-32, NASA-STD-5001, GSFC-STD-7000) Ability to interpret engineering models, drawings, specifications, written work instructions, and test procedures. Familiarity with the requirements of engineering for the space environment Willingness to work flexible hours as necessary. To comply with U.S. export regulations, such as the International Traffic in Arms Regulations and the Export Administration Regulations you must (a) be a U.S. Person as defined under those regulations, which includes U.S. citizens, U.S. nationals, lawful permanent residents of the U.S., and protected individual as defined by 8 U.S.C. 1324b(a)(3), or (b) otherwise be eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce, as appropriate. Preferred Skills and Education Experience with NX and other CAD software Experience with composite design and production for spacecraft or other aerospace applications Knowledge of production quality metrics Experience transitioning products from prototype to production. IQ / PQ process driven project completion PPS problem solving Implementation of large capital projects into a production environment

Job Description The Electronics Manufacturing Engineer provides strategic leadership for manufacturing system development, process integration, and long-term capability improvement. This role focuses on aligning production technologies, methods, and documentation with organizational goals for efficiency, scalability, and quality compliance. Key Responsibilities · Define and implement manufacturing strategies that enhance process capability, throughput, and quality across all product lines. · Develop, maintain, and control Manufacturing Work Instructions (MWIs) and routing documentation to ensure consistent production practices and traceability. · Lead DFM/DFX and NPI integration to ensure new designs are optimized for manufacturability and cost-effectiveness. · Evaluate and implement new technologies, equipment, and automation to improve production capability and competitiveness. · Develop long-term process roadmaps, capacity models, and capital investment plans. · Standardize production workflows, tooling, and methods across multiple assembly lines. · Partner with Design Engineering, Quality, and Supply Chain to drive continuous improvement and risk mitigation initiatives. · Lead cross-functional teams to implement Lean and Six Sigma projects targeting waste reduction, yield improvement, and cost savings. · Provide technical leadership, mentoring, and process guidance to engineering and production teams. Qualifications · BS in Electrical, Electronics, or Manufacturing Engineering. · 5-10 years' experience in electronic assembly or high-reliability manufacturing. · Strong knowledge of SMT, reflow, and automated assembly systems. · Demonstrated experience in process development, DFM, and capital equipment justification. · Familiarity with ISO 9001, AS9100, or ISO 13485 standards. · Strong project management, leadership, and data-driven decision-making skills.

We are looking for motivated mechanical engineers to develop cutting-edge products for our military, governmental, and commercial customers. Our group of mechanical engineers drive products from conception to production including product ideation, research, laboratory/prototype builds, experimental testing, and design for manufacturing. We do not hire discrete design, test, and analysis engineers - our engineers work across all of these roles. This is a hands-on job which will see you design something in CAD, perform FEA/CFD/hand analysis on it, have it fabricated, and physically test and iterate it yourself. As an engineer, you'll have the opportunity to lead your own projects and research. Your creativity and interest determine the next technology you investigate. We design and manufacture a wide variety of products and perform R&D on an even wider variety. Some of our ongoing research efforts that you may be involved with in this role include: HVAC systems for highly-demanding military applications, diesel engine component design and electrification, advanced robotics and additive manufacturing, design and fabrication of ZnS windows for hypersonic vehicles, laser weapon cooling systems, and much more. You will have the opportunity to learn every day, and no two days will be the same. This position may include proposal writing for your next idea, analytical calculations, computational simulations (CFD and FEA), laboratory build and testing, and direct customer interfacing. Company Expectations * We are looking for people that fit our values * problem solvers; people that can innovate solutions to real-world problems * intellectual curiosity and passion for engineering * internally motivated; we do not micromanage * highly-agile; our work crosses many boundaries, and no two days are alike Position Requirements * BSME +3 years of experience OR MSME from an Accredited University * GPA not less than 3.3 at all degree levels * US Citizenship required due to strict ITAR regulations * Strong understanding of mechanical engineering fundamentals * Interest in hands-on engineering work in one or more focus areas of Mainstream * Prior experience in design, test, and/or analysis with an interest in learning more about each * ANSYS experience with willingness to verify design through test * Knowledge of testing equipment and setups is a plus * CFD/FEA modeling (ANSYS/FLUENT) experience is a plus Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

**A Snapshot of your Day:** We're looking for passionate Operations Engineer to join the 5F Product Engineering team in Orlando. As an Operations Engineer, your day centers around operational data analysis, testing preparation, engine testing and resolving technical issues for 5000F product. The operational engineer is the cognizant engineer for Gas Turbine new unit and Modernizations & Upgrade products for SGT6-5000F. The scope of responsibility extends to coordinating support from all other organizations directed towards development, negotiations and implementations for the new unit and Modernizations and Upgrade (M&U) product line. **How You'll Make an Impact** + Testing preparation and field validation including testing at test-bed and customer sites. + Lead and facilitate fast resolution of technical issues of sold GTs. This includes evaluation of a root cause, solution development and implementation followed by verification/validation. + Operational data analysis of new units to identify trends and potential issues + Technical definition of Gas Turbine (GT) Operation Modes (e.g. Load Gradients, Grid-Code, Additional Features, Control System) + Close interaction and alignment with GT Module Engineering, Auxiliary/ controls and BOP. + Creation of related technical documentation + Analysis of related technical risks + Support of offering (Negotiation) process for GT projects with focus on GT operation + Support of COE projects for first time applications + 10-25% travel is expected in support of customer meetings, site walk-downs, vendor support, testing, and product implementation. **What You Bring** + Bachelor's degree or equivalent in Mechanical or Aerospace Engineering from an accredited university/college. Master's degree is a plus. + Minimum 8+ years of successful experience in a gas turbine development environment with extensive understanding of gas turbine design, operational aspects & improvement levers. Advanced degree may be substituted for experience, where applicable. + Strong communications skills, network building, and solid engineering background. Good program management skills is preferred. + Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. **About the Team** **Who is Siemens Energy?** At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ******************************************** **Rewards** + Career growth and development opportunities + Supportive work culture + Company paid Health and wellness benefits + Paid Time Off and paid holidays + 401K savings plan with company match + Family building benefits + Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Are you ready for what's next? Come explore opportunities within Brunswick, a global marine leader committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond. Brunswick believes “Next Never Rests™,” and we offer a variety of exciting careers and growth opportunities within united teams defining the future of marine recreation. Provide technical process support in a cross-functional, collaborative, team environment for an electronics production operation which includes SMT and through-hole electronics assembly, conformal coating and encapsulation, final assembly, and test. Focus will be on production assembly operations downstream of the SMT PCB population process. This includes new product introduction and current product support. Work closely with design engineering, test engineering, production, and quality department personnel to ensure successful, timely product launches and conformance to specifications. Coordination and tracking of multiple projects are key to success. Your primary duties and responsibilities include but not limited to: Participate and contribute to DFM/DFA meetings with design engineering to optimize designs of electronic assemblies for manufacturability Define process for new product and process improvement for current product in accordance with IPC industry standards Review and approve engineering drawings Investigate and solve quality problems Select electronic components and select substitutes based on specifications Respond to engineering questions and review/approve files from PCB suppliers Create and revise documentation including process flow, PFMEA, control plans, detailed operator work instructions, etc. Document, track and report out on project status Train production trainers on new products and processes Coordinate with purchasing, production, and quality personnel to accomplish design validation builds, process validation builds and start of production Facilitate production equipment selection, financial justification, and implementation Knowledge, Skills, and Ability Requirements Must be able to read and interpret engineering drawings Must be able to read and interpret electronic schematic diagrams Must have a deep working knowledge of electrical theory and common electronic components and their functions Must understand manufacturing processes commonly used in the manufacture of electronic assemblies Must have a personal knowledge of IPC standards and their application to electronics manufacturing Mastery of L.S.S. and/or lean manufacturing principles and tools is a plus Proficiency in the use of PADS or similar PCB design software is a plus Proficient user of Microsoft Office software (Word, Excel, Outlook, PowerPoint, Project, Visio, etc.) Must have excellent, written and verbal communication skills in English Education and Experience Requirements Bachelor's degree in engineering or related technical field required; electrical/electronics engineering degree is preferred 5+ years electrical/electronics, manufacturing engineering experience in a manufacturing facility with firsthand responsibility for new product introduction of electronic assemblies Experience in creation of documentation required for new product launch including Work Instructions, Process Flow, PFMEA, control plans, etc. Experience working in a collaborative team environment Experience working with potting and conformal coating is a plus Experience working in an ISO 9001 (or other related quality standard) compliant organization is strongly preferred LSS Green Belt certification is a plus The anticipated pay range for this position is 72,000 - 115,300 annually. The actual base pay offered will vary depending on multiple factors including job- related knowledge/skills, relevant experience, business needs, and geographic location. In addition to base pay, this position is eligible for an annual discretionary bonus. At Brunswick, it is not typical for an individual to be hired at or near the top end of the salary range for their role. Compensation decisions are dependent upon the specifics of the candidate's qualifications and the business context. This position is eligible to participate in Brunswick's comprehensive and high-quality benefits offerings, including medical, dental, vision, paid vacation, 401k (up to 4% match), Health Savings Account (with company contribution), well-being program, product purchase discounts and much more. Details about our benefits can be found here. Why Brunswick: Whatever tomorrow brings, we'll be at the leading edge. As the clear leader in the marine industry, we're committed to our values and supporting our exceptional people. We offer and encourage growth opportunities within and across our many brands. In addition, we're proud of being recognized for making a splash with numerous awards! About Mercury Marine: Mercury Marine is a world leading manufacturer of marine propulsion systems. A $2.6 billion division of Brunswick Corporation (NYSE: BC), Mercury designs, manufactures and distributes engines, services and parts for recreational, commercial and government marine applications, empowering boaters with products that are easy to use, extremely reliable and backed by the most dedicated customer support in the world with 10,000 service points globally. Mercury's industry-leading brand portfolio includes Mercury outboard engines; Mercury MerCruiser sterndrive and inboard packages; Mercury global parts and accessories including propellers, and SmartCraft electronics; Power Products Integrated Solutions; MotorGuide trolling motors; Attwood, Garelick and Whale marine parts; Land 'N' Sea, BLA, Payne's Marine, Kellogg Marine & Lankhorst Taselaar marine parts distribution; and Mercury and Quicksilver parts and oils. More information is available at mercurymarine.com. Next is Now! We value growth and development, recognizing that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Brunswick is an Equal Opportunity Employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other characteristic protected by federal, state, or local law. Diversity of experience and skills combined with passion is key to innovation and inspiration and we encourage individuals from all backgrounds to apply. If you require accommodation during the application or interview process, please contact ****************************** for support. For more information about EEO laws, - click here Brunswick and Workday Privacy Policies Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: ****************************** or ************. All job offers will come to you via the candidate portal you create when applying through a posted position through https:///************************** If you are ever unsure about what is being required of you during the application process or its source, please contact HR Shared Services at ************ or ******************************. #Brunswick Corporation - Mercury Marine

We are seeking a Product Development Engineer to support transitioning new products from R&D to production and improve manufacturability of existing products. The Product Development Engineer will be engaged with new products, product redesign, and helping develop and implement fabrication and assembly processes with manufacturing support staff. Candidate must be self-motivating, expected to use their engineer skillset to solve problems, and have a mind for product and process continual improvement. Products range from low-rate, high-mix, and high-precision components, complex systems and assemblies for military and high-end applications, to high-rate commercial-sector items. Preference will be given to candidates with experience in the following areas: * Design for Manufacturing (DFM) - Required * Proficiency in 3D CAD modeling and drawing creation - Required * Design of production tooling/fixtures for quality and assembly consistency * Set up and support of new product lines * General knowledge of various fabrication/manufacturing processes such as: CNC machining, sheet metal cutting/forming, injection molding, rotational molding, tube assembly fabrication, etc... * Geometric Dimensioning & Tolerancing (GD&T - ASME Y14.5) Specific responsibilities * DFM: Redesign existing products for manufacturability and assist R&D in new designs before reaching production. * Process Engineering Change Orders (ECOs) for issues/changes identified during production * Plan, design and implement manufacturing and assembly processes for new product development * Work with design engineers to determine critical-to-function features and determine best methods to ensure quality and reliability while maintaining ease of manufacturing/assembly * Determine parts, equipment, and tools needed to achieve manufacturing goals according to product specifications * Design tooling and fixturing for production and quality control * Developing assembly work instructions and manufacturing traveler Position Requirements * B.S. in Mechanical Engineering with 3.3 minimum GPA * 5 years of experience minimum preferred * US Citizenship required due to strict ITAR regulations Mainstream Engineering Corporation is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.