Production team member jobs in Lebanon, TN - 208 jobs

TITLE Production Technician REPORTS TO Area Leader/Team Leader Work in a variety of areas, in production and packaging, to produce product for the company. KEY RESPONSIBILITIES Follow all company Safety Rules and Good Manufacturing Practices (GMP's). Produce high quality products in a safe and healthful manner. Assigned shift attendance is required. To work in all areas of production and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. Ability to work as part of a team. Assist fellow employees as needed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. The employee must be able to work 12 hour rotating shifts. The employees must occasionally lift/push/pull or carry up to fifty (50) pounds, and should be able to lift 30-35 pounds on a frequent basis. The employee must be able to squat or kneel and to bend on a frequent basis. The employee must be able to work in a cold (40-50 degree) environment. The employee must be able to tolerate exposure to flour and yeast materials. The employee must be able to climb steps on a frequent basis. VISION Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to high.

Benefits: 401(k) Opportunity for advancement Paid time off Benefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities Job SummaryWe are seeking a Mover/Production Technician to join our team! As such, you will be traveling to a different location each day, ensuring boxes and furniture are properly wrapped, and loading everything specified into a vehicle. You will also be responsible for securing the load properly to ensure nothing is damaged or destroyed, unloading the items at the destination, and providing excellent customer service to our clients. You will also be expected to help clean house contents once back at our location. The ideal candidate is comfortable working in all weather conditions, has strong customer service and communication skills, and can comfortably work on their feet lifting heavy objects. Responsibilities Travel to each location and ensure all boxes are properly packed, and all furniture is ready to move safely Load everything into the truck or vehicle with the team, taking care to make sure everything is well organized and the load is properly distributed Secure all boxes, furniture, and equipment before moving Unload all boxes, furniture, and equipment, placing them in the designated rooms as noted by the owners Maintain a safe, clean work environment Qualifications Strong communication and customer service skills Works well in a team environment Can comfortably work in all weather conditions Can lift and move heavy objects Can work on your feet for much of the day Compensation: $20.00 per hour Our Story FRSTeam of Middle TN is a trusted content restoration Company specializing in the restoration of textiles and electronics damaged by fire, water, smoke, mold, debris, and more. Led by Chad McCaslin, a third-generation owner of Heritage Cleaners in Murfreesboro, TN, we bring decades of experience and a personal commitment to helping homeowners recover after a loss. Chad's passion for restoration comes from a deeply personal experience. Having gone through a devastating house fire himself, he understands the emotional and logistical challenges homeowners face during such traumatic events. This experience inspired him to dedicate his career to helping others restore their valuable belongings and regain a sense of normalcy. At FRSTeam, we work closely with restoration contractors, insurance agents, and adjusters to ensure smooth and efficient pack-in and pack-out services. With our extensive expertise and meticulous attention to detail, we are committed to restoring your items to their pre-loss condition, offering peace of mind during what can be a difficult time. Our values At FRSTeam of Middle TN, our core values are centered on integrity, compassion, and excellence. We believe in treating every client like family, providing expert restoration services and peace of mind during stressful times. Our team is committed to doing what's right, every time, whether it's going the extra mile to ensure a job is done right or offering thoughtful, personalized support. We take pride in our work, always striving to exceed expectations and deliver lasting results that our clients can count on.

PLEASE NOTE THAT WE DO NOT CURRENTLY HAVE ANY OPENINGS. THIS APPLICANT POOL IS A PLACEHOLDER FOR INTERESTED CANDIDATES TO APPLY AND WE WILL REVIEW APPLICATIONS FROM THIS POOL WHEN WE HAVE ANY FUTURE OPENINGS. About NewBasis, LLC: Combining over 30 years of industry experience with the most recent advances in materials, engineering, technology, manufacturing and service. We manufacture pads and below ground enclosures for telecommunications, electrical, CATV, water, traffic, lighting, and industrial applications. Location: Lebanon, Tennessee A Day in the Life - Polymer Concrete (PC) Caster at NewBasis As a PC Caster at NewBasis, your day revolves around casting high quality covers and boxes using a variety of mold platforms. You'll prepare molds of different sizes, mix and pour polymer concrete, and reinforce each product with materials like fiberglass or rebar to meet strength and durability standards. The ideal candidate is hands-on, reliable, and committed to following procedures and best practices to meet production goals and reduce waste. What to Expect Each Day Safety First - Follow safety procedures, maintain a clean work area, and wear required personal protective equipment Pride in Quality - Produce products that meet customer and company standards Production Goals - Meet daily output targets for on-time customer delivery Work environment - Manufacturing facility with exposure to dust, noise, vibrations, and varying temperatures. Regular standing, bending, lifting, and use of hand tools and equipment. What will help you thrive in this position? Basic understanding of manufacturing processes and materials handling. Working knowledge of tools, common production equipment, and mechanical systems. Ability to read and interpret simple instructions, work orders, and engineering drawings. Manual dexterity and problem-solving skills. Physically capable of lifting up to 50 lbs., standing for long periods, and performing repetitive tasks. Good physical condition, attention to detail, and team-oriented mindset. High school diploma or GED preferred. Compensation & Benefits Employees in this position start at $22/hour and have the potential to earn an additional $1/hour after 90 days. Hourly employees are eligible for benefits the first day of the month following a 60-day waiting period. Benefits include medical, dental, and vision coverage with company-paid life insurance, 401k retirement plan (with matching), voluntary LTD, STD, spouse and dependent life insurances. Schedule Experience a better work/life balance with a Monday-Thursday, 6:00am - 4:30pm schedule. Pre-employment Screening All employees are required to complete a pre-employment background check and drug screening. Newbasis provides equal employment opportunity to all applicants and employees without regard to race, color, religion, sex, sexual orientation, age, national or ethnic origin, veteran or military status, disability, as well as any other protected status under the law. New Basis will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if NewBasis is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting calcivilrights.ca.gov/fair-chance-act/. Newbasis reserves the right to make exceptions to modify or eliminate this document or its content. This document supersedes all previous policies, procedures or guidelines pertaining to this subject.

PLEASE NOTE THAT WE DO NOT CURRENTLY HAVE ANY OPENINGS. THIS APPLICANT POOL IS A PLACEHOLDER FOR INTERESTED CANDIDATES TO APPLY AND WE WILL REVIEW APPLICATIONS FROM THIS POOL WHEN WE HAVE ANY FUTURE OPENINGS. About NewBasis, LLC: Combining over 30 years of industry experience with the most recent advances in materials, engineering, technology, manufacturing and service. We manufacture pads and below ground enclosures for telecommunications, electrical, CATV, water, traffic, lighting, and industrial applications. Location: Lebanon, Tennessee A Day in the Life - Polymer Concrete (PC) Caster at NewBasis As a PC Caster at NewBasis, your day revolves around casting high quality covers and boxes using a variety of mold platforms. You'll prepare molds of different sizes, mix and pour polymer concrete, and reinforce each product with materials like fiberglass or rebar to meet strength and durability standards. The ideal candidate is hands-on, reliable, and committed to following procedures and best practices to meet production goals and reduce waste. What to Expect Each Day Safety First - Follow safety procedures, maintain a clean work area, and wear required personal protective equipment Pride in Quality - Produce products that meet customer and company standards Production Goals - Meet daily output targets for on-time customer delivery Work environment - Manufacturing facility with exposure to dust, noise, vibrations, and varying temperatures. Regular standing, bending, lifting, and use of hand tools and equipment. What will help you thrive in this position? Basic understanding of manufacturing processes and materials handling. Working knowledge of tools, common production equipment, and mechanical systems. Ability to read and interpret simple instructions, work orders, and engineering drawings. Manual dexterity and problem-solving skills. Physically capable of lifting up to 50 lbs., standing for long periods, and performing repetitive tasks. Good physical condition, attention to detail, and team-oriented mindset. High school diploma or GED preferred. Compensation & Benefits Employees in this position start at $22/hour and have the potential to earn an additional $1/hour after 90 days. Hourly employees are eligible for benefits the first day of the month following a 60-day waiting period. Benefits include medical, dental, and vision coverage with company-paid life insurance, 401k retirement plan (with matching), voluntary LTD, STD, spouse and dependent life insurances. Schedule Experience a better work/life balance with a Monday-Thursday, 6:00am - 4:30pm schedule. Pre-employment Screening All employees are required to complete a pre-employment background check and drug screening. Newbasis provides equal employment opportunity to all applicants and employees without regard to race, color, religion, sex, sexual orientation, age, national or ethnic origin, veteran or military status, disability, as well as any other protected status under the law. New Basis will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if NewBasis is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting calcivilrights.ca.gov/fair-chance-act/. Newbasis reserves the right to make exceptions to modify or eliminate this document or its content. This document supersedes all previous policies, procedures or guidelines pertaining to this subject.

Building the people that build the world. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Engineered Air Movement, TAMCO is an innovative manufacturer of high-end, superior quality dampers and air control products that serve commercial, industrial, and institutional markets. With its high attention to detail for products that are durable, maintenance free, energy efficient, and unparalleled in performance, companies rely on TAMCO to provide comfort and mission critical and industrial cooling solutions. How you will make an Impact (Job Summary) SPX TAMCO is a diverse team of unique individuals who all make an impact. You will be an active member of the assembly team building dampers per job order tickers, blueprints, manuals, engineering memos, or sketches. What you can expect in this role (Job Responsibilities) While each day brings new opportunities at SPX, your core responsibilities will be: 1. Safety Follow all safety rules and adhere to core value of business Maintain clean, orderly work areas and equipment Ensure proper and effective operation of equipment and tools. Report repairs and/or issues to team lead or supervisor 2. Quality Ensure all parts and surfaces are free from defects Monitor quality of own work and immediately report defective material, unusual conditions, and/or operating difficulties to team lead or supervisor Perform light maintenance on tools, equipment, machines, and other devices used in the normal course of the work performed 3. Delivery Able to read shop orders Cut aluminum extrusions to length Operate punch press Assemble dampers according to shop orders Daily documentation of work performed 4. Culture Desire to do the right thing Team player, assisting other team members and departments as needed with other duties not routine to position Punctual, on time, ready to work, every day What we are looking for (Experience, Knowledge, Skills, Abilities, Education) We each bring something to the table, and we are looking for someone who has: Required Experience Prior experience in a manufacturing environment Mechanically inclined Preferred Experience, Knowledge, Skills, and Abilities Excellent attendance Positive attitude Ability to communicate verbally and written Ability to follow instructions, work independently, and as a team Attention to detail Process improvement mindset Safety oriented Education & Certifications High school diploma or equivalent Travel & Working Environment The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Lifting to 50 pounds with assistance Sitting, standing, walking, bending, grasping, pushing, pulling, crawling, climbing, twisting, reaching, and working at heights Perform repetitive motions Plant environment with potential exposure to harsh weather, excessive heat/ cold, and/or excessive noise How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave Competitive health insurance plans and 401(k) match, with benefits starting day one Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential. SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.

Lewis Bakeries located in Murfreesboro, TN is looking to fill several Full Time, open positions at our bakery! As a General Helper, you will be responsible for operating and maintaining the continual running of machines and equipment, while also adhering to workplace safety, food safety and product quality guidelines. * Full-Time with required Overtime! * Starting wages as of 5/1/23 begin at $22.77/hr, with annual increases and shift premiums! * $500 Quarterly Attendance Bonus * Most competitive benefits package in the area: Blue Cross & Shield Medical, Dental, Vision, Life Insurance, Disability & Retirement plan... all for $41 a week employee only, and $53 a week for family!! * We work 24 hours, 6 days a week including every Saturday and Sunday. Shifts are 10-12 hrs. You MUST be able to work any shift available and be on a rotating shift until either placed on an open job/shift once qualified or when seniority grants a preferred shift.

BU2 Thermal and Fluid System Your Contribution The Assembly Producer will operate a press or assemble parts to form complete units or subassemblies at a press, filling machine, or conveyor line. Position is responsible for both accurately and thoroughly completing and maintaining all daily paperwork associated with the assembly process. Your Experience & Qualifications * Ability to read gauges and record findings * Ability to measure sizes of parts in millimeters * Ability to use a computer, especially SAP, OEE and label programs. * Attention to detail and ability to maintain a high quality orientation * Move product, material, and/or equipment to and from designated areas * Maintain clean, organized, safe working environment with equipment and materials located in proper locations in accordance with 5S standards inside and outside of facility * Safely and efficiently operate all machinery * Perform work in an environmentally conscious manner and reduce waste * Ability to work all designated shifts * Excellent attendance record * Ability to work in a team environment * Other duties as assigned Our Offering We will provide a collaborative environment working on exciting assignments, along with ongoing personal & career development opportunities. We encourage you to apply even if you don't meet every single requirement. You may just be the right candidate for this or other roles! After receiving your online application, the interview process will typically be, a screening call followed by Personal Interview(s) For more information about MAHLE and what a career with us looks like for you, click here. and to learn more about our foundation owned technology group click here. #DiversityMatters with our inclusive culture, we welcome applications from all social, religious & ethnical backgrounds, disabilities both mental and physical, identities (gender) and neurodivergent people. Do you have any questions? ************************ US Facts about the job Benefits: Entry level: Production workers / General labor Part- / Full-time: Full Time Functional area: Production Department: BU2 Thermal and Fluid System Location: Murfreesboro, TN, US, 37127 Company: MAHLE Filter Syst.(US) Closing date for applications Don't waste any time, apply while the position is online. Your future at MAHLE As a team player and someone who thinks ahead, you can deploy all your skills with us. In cooperation with colleagues from different countries and areas, you contribute in designing the mobility of the future. When selecting MAHLE, you choose trend-setting technologies and strategies. Are you interested in working with us and developing efficient and environmentally-friendly solutions, optimising existing products, and turning innovative ideas into reality? Then MAHLE is the right address for you. Shape the future with us.

APCOM, an acronym for Appliance Components, is a leading global manufacturer of reliable water heating and appliance components that provide product differentiation at a competition price. Founded by Mike Grace in 1969, APCOM started in a 10,000 sq. ft. building and has since grown to three locations in the United States as well as facilities in Mexico, China and India. Our international locations focus on local markets and best practices are leveraged between all facilities. In 2001, APCOM joined the A. O. Smith Corporation family of companies and manufactures 75 million parts annually, with 60 million produced in the United States. Primary Function APCOM's facility in Franklin, Tennessee, is a facility that manufactures water heater components. The Production Operator will initiate manufacturing operations in accordance with customer requirements and monitor performance to optimize production processes. Responsibilities Operator will be responsible for the manufacturing of water heater components per department standards. Operators will cross train on operations in each department and follow quality and safety standards. Must be able to work with automated machinery and have the ability to perform troubleshooting tasks in order to increase machine up time. Some areas may require the ability to read blueprints, read a tape measure, and wear specialized PPE. Must be able to perform other duties as assigned. Qualifications High School Diploma or GED. Basic computer knowledge. No previous related work experience required; we will provide training. Must have physical stamina to work in industrial production setting with repetitive movement up to 8 hours at a time. Frequent bending, stooping, crouching, pushing, pulling, and reaching for extended periods. Continuous periods of walking, sitting, and standing. Must be able to lift and/or move heavy objects up to 50lbs unassisted.

Job Title: Production Technician Job Status: FULL TIME 3rd Shift Salary: * $19.25 - 3rd Shift ($17.75 Base Rate + $1.50 Shift Premium) Benefits: * 14 Paid Holidays * 3 Weeks Paid Time Off Annually * Weekly Payroll * Comprehensive Insurance (Medical, Dental, Vision) * 401k Match Job Overview: MARELLI is seeking dedicated Production Technicians for immediate openings on the 3rd shift. The role involves semi-skilled assembly, machine operation, and general production activities on the assembly line. Responsibilities: * Assemble components and sub-components manually or using machinery/tools on the assembly line. * Perform tasks requiring standing or repetitive motions (e.g., gripping, reaching, bending, pushing, or pulling). * Move materials/products within the work area (lifting up to 40 pounds). * Participate in periodic cross-training and transition from simple assembly to machine operations. * Conduct record-keeping for production reports, checklists, time-keeping, and scrap/reject results. * Work in environments with exposure to welding fumes, chemicals, noise, or vibrations. Requirements: * Previous factory/manufacturing experience is a plus. * No High School Diploma or GED required. * Basic grammar and math skills. * Effective communication skills. * Ability to work a standard 40-hour week, with overtime as required. Additional Information: MARELLI is an Equal Opportunity Employer. Employment decisions are based on qualifications without regard to race, color, religion, sex, sexual orientation, national origin, gender identity, genetic information, disability, protected veteran status, age, or any other legally protected group status. Candidates must be legally authorized to work in the United States and provide proof of eligibility at hire. Visa sponsorship is not available. Related Job Titles/Functions: Production Worker, Assembly Line Technician, Assembly Worker, Manufacturing Technician, Assembly Line Worker.

Department : Production Reports to : Team Leader Summary/Objective The Team Member position is to ensure that quality parts are being finished and that any non-conforming parts are reported and removed for disposition.They will also contribute to a work environment where fairness, equality and non-discriminatory practices are the standard. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Following the job instruction provided by the Group Leader. Meeting daily job assignment standards. Ability to rotate within the assigned work station in a line or within other lines. Immediately inform the Group Leader/Team Leader of any visual and/or physical defects in production pieces that appear at your work station. Reference operation instructions. Trim pieces without creating any defects. Perform additional trimming of flash to enable a part to meet customer standard and requirements. Ensuring that no defective pieces are packed. Record any non-conforming parts on the productive reports. Ensuring all conforming parts are correctly packed according to packaging standards. Ensure that all aspects of his or her area of responsibility is in full compliance with the quality system in place at the operation at all times. Ensure there are no quality or production interruptions due to lack of giving or seeking information by fully informing the Production Manager of all events affecting production and the shift. Maintain a productive working environment by good communication, cooperation, positive habits and attitudes. Record information on scrap sheets and/or downtime sheets regarding scrap parts, and information about machine, equipment and fixture problems. Follow company safety rules 100% of the time. Reading, understanding and complying with company safety rules as designated by the YAPP USA Automotive Systems, Inc. Employee Handbook and outlined by the Job Safety Guide. Take action to promptly correct or remove all workplace hazards and unsafe work conditions. Competencies Problem Solving/Analytical Technical Skills Communication Proficiency, written and oral Attendance/Punctuality Dependability Ethical Conduct Supervisory Responsibility This position as no supervisory responsibilities. Work Environment This job operates in a manufacturing environment.While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to grasp small items, handle, or feel; and reach with hands and arms. Summary/Objective The Team Member position is to ensure that quality parts are being finished and that any non-conforming parts ate reported and removed for disposition.They will also contribute to a work environment where fairness, equality and non-discriminatory practices are the standard. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Following the job instruction provided by the Group Leader. Meeting daily job assignment standards. Ability to rotate within the assigned work station in a line or within other lines. Immediately inform the Group Leader/Team Leader of any visual and/or physical defects in production pieces that appear at your work station. Reference operation instructions. Trim pieces without creating any defects. Perform additional trimming of flash to enable a part to meet customer standard and requirements. Ensuring that no defective pieces are packed. Record any non-conforming parts on the productive reports. Ensuring all conforming parts are correctly packed according to packaging standards. Ensure that all aspects of his or her area of responsibility is in full compliance with the quality system in place at the operation at all times. Ensure there are no quality or production interruptions due to lack of giving or seeking information by fully informing the Production Manager of all events affecting production and the shift. Maintain a productive working environment by good communication, cooperation, positive habits and attitudes. Record information on scrap sheets and/or downtime sheets regarding scrap parts, and information about machine, equipment and fixture problems. Follow company safety rules 100% of the time. Reading, understanding and complying with company safety rules as designated by the YAPP USA Automotive Systems, Inc. Employee Handbook and outlined by the Job Safety Guide. Take action to promptly correct or remove all workplace hazards and unsafe work conditions. Competencies Problem Solving/Analytical Technical Skills Communication Proficiency, written and oral Attendance/Punctuality Dependability Ethical Conduct Supervisory Responsibility This position as no supervisory responsibilities. Work Environment This job operates in a manufacturing environment.While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to grasp small items, handle, or feel; and reach with hands and arms. Position Type/Expected Hours of Work This is a full-time position, and hours and days of work are determined by their shift. Working overtime and/or weekends may be required as necessary. Travel Travel is not expected. Required Education and Experience High School Diploma or GED Preferred Education and Experience Six months experience in a manufacturing environment. Additional Eligibility Qualifications Adaptability Quality Good Safety Record Teamwork Work Authorization/Security Clearance 1. Must have valid working documents to work in the United States.. AAP/EEO Statement To provide equal employment and advancement opportunities to all individuals. Employment decisions at YAPP USA will be based on merit, qualifications and abilities. Employment decisions shall comply with all applicable federal, state and local laws prohibiting discrimination or harassment in the workplace. YAPP USA does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability, weight, height, familial status, veteran status, or any other characteristic protected by law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Job Type: Full-time

Job Description The Machine Operator I position operates equipment within a production line in order to produce, assemble or finish various designs and sizes of garage door components. The successful candidate will be a reliable, self-motivated, results-oriented individual who possesses and utilizes their strong organizational, technical and mechanical skills to motivate those around him/her through exemplary leadership. Major Responsibilities/Activities: Conduct activities by adhering to established procedures and approved processes. Operate relevant production equipment or tools. Fulfill production orders, meet inventory requirements, and produce at the prescribed production rate(s). Capacity to develop knowledge of manufacturing methods, techniques, and related equipment and be able to apply this knowledge to the completion of work as assigned. Must be able to measure products per work instructions. Must become familiar with the product's construction and application. Must have the ability to obtain production parts from stock locations and fill out necessary paperwork the transfer stock. Must have the ability to learn computer systems to be able to adjust machinery settings and clear faults on machinery and systems. Understand how to read part order sheets, pick correct parts and install correctly per print instructions Must be able to learn how to operate all machinery and make minor adjustments as needed. Must be flexible in learning various production line processes. Make and produce hand samples, label and package correctly. Learn and operate Paint system and fill in for painters as needed. Learn and assemble custom doors and aluminum doors. Learn, operate and make minor adjustments on track assembly line. Learn inventory procedures and execute them as needed. Learn and unload steel trucks, place steel safely in storage locations. Willing to learn Machine Operator II position, and fill in as needed. Must promote and maintain a safe and clean work environment. Must have an understanding of 6S and maintain 6S standards at all time. Assist in quality training of fellow employees. Work overtime as needed, even on a short notice to meet customer demands. Other job duties and responsibilities as assigned. Minimum Requirements: Have a High School diploma, GED or equivalent with at least one year of progressive manufacturing or sheet metal fabrication experience. Have the flexibility to work on different shifts, when required, to meet production or project goals. Essential Mental Functions: Must be able to maintain focus of tasks at hand with attention to detail. Must be able to follow an established routine and be predisposed to high level of interaction in a team environment. Successful candidates must be a highly organized, self-motivated individual who can work independently without continuous supervision. Work with an understanding that they are a member of a team where success for one is measured by success for all. Must be able to manage multiple tasks, priorities, and easily adapt to changing situations. Must be able to step in and lead team members in all aspects, as needed. Essential Physical Functions: Be able to safely lift or move at least 50 lbs. Be able to safely climb stairs or ladder. Be able to work in cold or hot working conditions. Equipment Used: Tools and equipment along with specialized training if needed will be provided as required. Who we are Hörmann is a premier manufacturer of garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability, and integrity. We offer a team-centered environment, where each member's unique knowledge, skills, abilities, and efforts define our success as a company. As an international corporation Hörmann prizes diversity in all positions; therefore, candidates with second language ability especially in Spanish or German will be given additional consideration; however, fluency in English is required. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is committed to providing access and reasonable accommodation in its services, activities, programs, and employment opportunities in accordance with the Americans with Disabilities Act and other applicable laws. Additional Comments Hörmann offers a comprehensive, competitive benefit package including medical, dental, vision, life, and supplemental insurance plans, 401(k) with employer match, as well as vacation and holiday pay. Hörmann is a drug-free workplace. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test.

Interested in a CAREER and not just a “job”? Join the Cavco Lafayette Team as a PRODUCTION HOME ASSEMBLER with starting pay of $18.00 per hour + Production Bonus after training! Complete an application (either online or in person at 739 HWY 52 Bypass W in Lafayette, TN.) and begin your career building a family's custom home! Experience preferred but not required. If you are eager to learn, we will train the “right person”. The Production Home Assembler follows work orders and instructions in order to accurately and efficiently prepare and assemble building components and homes in a factory assembly line environment. Essential Duties and responsibilities: Operate various hand tools, power tools and equipment used to complete carpentry duties including: Circular Saw Table Saw Router Pneumatic Nail Gun (roofing, framing and finish work) Drills And other tools needed for measuring, cutting, fastening, and drilling Cabinet and or finish carpentry and trim, build and installation CNC machine experience preferred Cooperate and promote a team concept with all other company employees Adhere to all rules and regulations, at all times Meet or exceed company safety standards Perform other tasks as assigned by management Minimum Qualifications: Must be at least 18 years of age Must be legally authorized to work in the United States Be able to read, write, and speak English High School diploma, preferred Knowledge, Skills and Abilities: Ability to read a tape measure Possess basic construction knowledge and comfortable using basic tools Excellent attention to detail Ability to read blueprints, a plus Ability to work in a fast-paced environment and multi-task Ability to trouble shoot and problem solve in a high-volume Versatility and willingness to transfer into various departments when necessary You must be able to communicate efficiently and clearly with other Team Members Working conditions: Continuous exposure to heat, cold, noise, and working outdoors. Must wear protective equipment while at the location Physical requirements: Requires walking, sitting, lifting, pushing, pulling and climbing to a significant degree Heavy Work-Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds or force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees as well as function safely around construction equipment Disclaimer: “This is intended to provide general information about the position. It is not an employment contract. As with all positions, the responsibilities and duties of this position may change. The company, in its discretion, may alter this job description at any time with or without notice.” EEO/AA Statement: Cavco Industries Inc., and all of its Subsidiaries are an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of sex, age, race, color, religion, physical or mental disability, creed, national origin, veteran status, sexual orientation, genetic information, gender identity, or gender expression in the programs or activities which it operates.

Lasko Products, an industry leader of home environment products for over 100 years, is looking to add Production Operators to our light manufacturing facility in Franklin, TN. The Production Operator performs production line work in the assembly, molding, and/or press department including but not limited to assembling product, operating machinery, and finalizing products to prepare them for shipment. We offer a competitive hourly rate, paid time off, and comprehensive benefits. Essential Functions: Perform work in a productive manner, maintaining speed and accuracy while following safety, quality, and production standards. Assembling product on the production line with consistent speed and accuracy to meet production targets. Operating machinery and inspecting produced parts to ensure timely delivery to the assembly department for final production. Keeping workstation and production area clean and safe. Stocking production area with assembly components. Inspecting assembly components and finished product to ensure quality standards are met. Testing finished product for compliance. Making minor repairs to assembled product as needed Reporting any issues to line lead or supervisor if needed. Other tasks as assigned. Competencies and Abilities: Ability to work as part of a team Physical dexterity Good communication skills Positive attitude Previous experience working in a manufacturing setting is a plus Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Work Environment: Manufacturing environment--exposed to dust, odors, and noise. About Lasko Products Better Air Starts Here. Lasko Products is the leading air solutions brand with a reputation for reliable products, peak performance, and perpetual innovation - our commitment to our customers for over a century. Founded in 1906 by Henry Lasko in Philadelphia, Lasko has evolved for over a century to become the global leader in air solution products. From our roots in small appliances, fans, and portable heaters, we've grown to become the leading home comfort company while maintaining our unwavering commitment to quality and value. Today, Lasko stands as a symbol of innovation, offering consumers around the world high-performance products; portable fans, heaters, air purifiers, humidifiers, and home ventilation solutions. Our well-known brands, such as B-Air, Air King, and Guardian Technologies, serve both consumer and commercial markets across North America and internationally. As an American company, we take pride in upholding the spirit of hard work, trust and accessibility, ensuring that Lasko remains available to all, for generations to come. Headquartered in West Chester, Pennsylvania, with manufacturing and distribution facilities nationwide, Lasko continues to set the standard in the air solutions category for another 100 years. Lasko's mission is to enhance lives by creating comfortable environments with innovative products you can trust. The company's success is based on Five Core Values: Be Bold Challenge the status quo Courageously pursue the impossible Reject mediocrity Be Together Work together for success Drive trust and candor with each other Prioritize "We" before "I" Be A Leader Lead with personal conviction Inspire each other to deliver high- quality results Leverage resilience and agility to drive excellence Be Accountable Consistently deliver to our customers Embrace commitments as a contract Take pride in our actions Be The Change Demonstrate a passion to win Make a difference at work in our communities Step forward and take initiative Why Join Lasko? At Lasko, we believe people do their best work when they're supported ---- personally and professionally. That's why we offer flexible hours and a hybrid work schedule for our corporate team, promoting employees to balance life and work in a way that fits their lifestyle. Our dog-friendly corporate headquarters adds a fun, welcoming atmosphere, while our competitive salaries with bonus potential recognize and reward your contributions. We also offer a comprehensive benefits package that includes a strong 401(k) match, wellness incentives, and robust health coverage. Join Lasko and be part of a legacy of innovation - at a company that values flexibility, growth, and a culture where you can thrive.

TITLE Production Technician REPORTS TO Area Leader/Team Leader Work in a variety of areas, in production and packaging, to produce product for the company. KEY RESPONSIBILITIES * Follow all company Safety Rules and Good Manufacturing Practices (GMP's). * Produce high quality products in a safe and healthful manner. * Assigned shift attendance is required. * To work in all areas of production and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. * Ability to work as part of a team. * Assist fellow employees as needed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. * While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. * The employee must be able to work 12 hour rotating shifts. * The employees must occasionally lift/push/pull or carry up to fifty (50) pounds, and should be able to lift 30-35 pounds on a frequent basis. * The employee must be able to squat or kneel and to bend on a frequent basis. * The employee must be able to work in a cold (40-50 degree) environment. * The employee must be able to tolerate exposure to flour and yeast materials. * The employee must be able to climb steps on a frequent basis. VISION Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to high.

Do you have experience in production? Luttrell Staffing Group is currently hiring Kanban / Machine Operator positions Scottsville, KY. $15-17 / Hour (Based on shifts and weekends) 1st, 2nd, and 3rd 8 hour shifts OR Rotation 12's 7am-7pm / 7pm-7-am Full-Time | Temp-to-Hire Zero Fees - you'll never be charged for any screening service Fast Start Date Weekly Pay Job duties for Kanban / Machine Operator: Loading and unloading shipments, stocking and picking parts - customer orders and kanbans Stocking, transferring, picking, wrapping and other tasks involved with S/R process Check product labels, packing lists and receipts and follow abnormal procedure when required Check paperwork and product conditions on inbound shipments when needed and follow rules if any errors or damage found Record deliveries Check paperwork and product conditions on inbound shipments when needed and follow rules if any errors or damage found Monitor product flow in and out of shipping to ensure safety and all S&R work instructions are followed Maintains the work area and equipment in a clean and orderly condition Notify Leader, Coordinator, or Supervisor if system errors occur Completes any other related tasks as needed Qualifications for Kanban / Machine Operator: High school diploma or equivalent Must wear required PPE (Bump caps, safety toe shoes, safety glasses, masks, ear plugs, harness, gloves, aprons, etc.) Must have valid driver's license Capable of operating a pallet jack Ability to obtain picker, forklift, and stand-up lift certification Ability to work heights of 18 ft Ability to stand for duration of shift Ability to lift up to 60 lbs Ability to stoop, bend, squat, kneel, twist and reach Please apply by clicking on the link below, then call or text (270) 782-2226.

Wrap up the year with a new opportunity… the perfect gift to yourself. Ranked #7 among top manufacturers in the Upper Cumberland, Aphena Pharma Solutions is a fast-growing pharmaceutical packaging company committed to quality, innovation, and putting people first. With clean, climate-controlled facilities and a strong company culture, Aphena is more than a workplace-it's a place to grow, thrive, and build your future. What Sets Aphena Apart? ✅ Comprehensive Benefits Company contributions to medical, dental, and vision plans Paid life insurance & deductible assistance 401(k) match PTO after 90 days & paid holidays ✅ No Diploma or GED? No Problem! Take our basic skills assessment to determine eligibility ✅ Room to Grow Promotion opportunities available within 60 days Now Hiring Production Technicians: Night Shift: Starting at $16.30/hr, plus $1.50 per hour night shift differential Bonuses: $750 (Night Shift) Schedule: 12-hour rotating shifts in a clean, climate-controlled environment Schedule Details: Night Shift Hours: 6:00 PM - 6:00 AM Rotating schedule: Work 2 days on, 2 days off, 3 days on, then flip the schedule weekly. Qualifications What We're Looking For: We value applicants with a proven track record of reliability and steady employment. High school diploma or equivalent preferred, but not required 2-3 years of experience in manufacturing or related work is a plus Reliable, self-motivated individuals with strong communication skills Team players who enjoy a fast-paced, hands-on role With a new season comes new opportunity! Join the Aphena Pharma Phamily and grow with us this Christmas-and beyond. Apply today-your future starts here.

Job DescriptionBenefits: 401(k) Opportunity for advancement Paid time off Benefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities Job Summary We are seeking a Mover/Production Technician to join our team! As such, you will be traveling to a different location each day, ensuring boxes and furniture are properly wrapped, and loading everything specified into a vehicle. You will also be responsible for securing the load properly to ensure nothing is damaged or destroyed, unloading the items at the destination, and providing excellent customer service to our clients. You will also be expected to help clean house contents once back at our location. The ideal candidate is comfortable working in all weather conditions, has strong customer service and communication skills, and can comfortably work on their feet lifting heavy objects. Responsibilities Travel to each location and ensure all boxes are properly packed, and all furniture is ready to move safely Load everything into the truck or vehicle with the team, taking care to make sure everything is well organized and the load is properly distributed Secure all boxes, furniture, and equipment before moving Unload all boxes, furniture, and equipment, placing them in the designated rooms as noted by the owners Maintain a safe, clean work environment Qualifications Strong communication and customer service skills Works well in a team environment Can comfortably work in all weather conditions Can lift and move heavy objects Can work on your feet for much of the day

Lewis Bakeries located in Murfreesboro, TN is looking to fill several Full Time, open positions at our bakery! As a General Helper, you will be responsible for operating and maintaining the continual running of machines and equipment, while also adhering to workplace safety, food safety and product quality guidelines. Full-Time with required Overtime! Starting wages as of 5/1/23 begin at $22.77/hr, with annual increases and shift premiums! $500 Quarterly Attendance Bonus Most competitive benefits package in the area: Blue Cross & Shield Medical, Dental, Vision, Life Insurance, Disability & Retirement plan... all for $41 a week employee only, and $53 a week for family!! We work 24 hours, 6 days a week including every Saturday and Sunday. Shifts are 10-12 hrs. You MUST be able to work any shift available and be on a rotating shift until either placed on an open job/shift once qualified or when seniority grants a preferred shift. Qualifications Requirements: Physical requirements include repetitive lifting/stacking up to 25lbs overhead , pushing/pulling heavy carts of materials, lifting 50lbs of ingredients and other physical labor as needed. Must be able to work in extreme hot or cold conditions as some areas of the plant can be hotter than others, especially in the Summer. All candidates must successfully pass pre-employment steps including background check and drug screen. Apply right here on Indeed! Due to COVID-19, visitors will not be permitted inside the bakery. Once your application is submitted, please wait for a phone call from our HR department to discuss next steps.

Job Description Machine Operator II will be responsible for setting up and running specialized machine equipment (such as presses, un-coilers, roll-formers, and any other pieces of equipment as deemed necessary by management) to produce various designs and sizes of garage door sections and other garage door components. The employee will also be accountable for the overall quality and storage of garage door sections and other garage door components, the preparing of rejected material(s) for return to vendor(s) and the housekeeping of the machinery and general work area(s). Machine Operator II possess the ability to use a tape measure, micrometer, caliper, "feeler" gauge, and other mechanical tools as used in this position. Employee will be required to use a computer, be certified to drive a forklift truck, certified to operate overhead cranes and operate a pallet jack, able to lift, carry, and set up rollers and dies onto the press, un-coiler, and roll-former weighing up to 50 pounds. Major Responsibilities/Activities: Conduct activities by adhering to established procedures and approved processes. Operate relevant production equipment or tools. Fulfill production orders, meet inventory requirements, and produce at the prescribed production rate(s). Capacity to develop knowledge of manufacturing methods, techniques, and related equipment and be able to apply this knowledge to the completion of work as assigned. Must be able to read, interpret, produce, and measure products to prints/drawings and work instruction specifications to ensure compliance. Must become familiar with the product's construction and application. Must promote and maintain a safe and clean work environment. Must have an understanding of S and maintain 6S standards at all time. Assist in quality training of fellow employees. Basic trouble shooting for all machinery. Work overtime as needed, even on a short notice to meet customer demands. Other job duties and responsibilities as assigned. Minimum Requirements: Have a High School diploma, GED or equivalent with at least three years of progressive manufacturing or sheet metal fabrication experience. Have the flexibility to work on different shifts, when required, to meet production or project goals. Essential Mental Functions: Must be able to maintain focus of tasks at hand with attention to detail. Must be able to follow an established routine and be predisposed to high level of interaction in a team environment. Successful candidates must be a highly organized, self-motivated individual who can work independently without continuous supervision. Work with an understanding that they are a member of a team where success for one is measured by success for all. Must be able to manage multiple tasks, priorities, and easily adapt to changing situations. Essential Physical Functions: Be able to safely lift or move at least 50 lbs. Be able to drive a forklift (certification required) and use a pallet jack. Be able to operate overhead cranes (certification required) to lift up to 300 lbs. and over 5,000 lbs. of metal coils and roll-forming tables. Capable of pushing, pulling, and standing for long periods of time. Be able to work in cold or hot working conditions. Equipment Used: Tools and equipment along with specialized training if needed will be provided as required. Who we are Hörmann is a premier manufacturer of garage doors. We provide the building industry with high quality, innovative garage doors at competitive prices while maintaining a reputation of quality, reliability, and integrity. We offer a team-centered environment, where each member's unique knowledge, skills, abilities, and efforts define our success as a company. As an international corporation Hörmann LLC prizes diversity in all positions; therefore, candidates with second language ability especially in Spanish or German will be given additional consideration; however, fluency in English is required. Hörmann is an Equal Opportunity Employer with a diverse employment environment. Hörmann is committed to providing access and reasonable accommodation in its services, activities, programs, and employment opportunities in accordance with the Americans with Disabilities Act and other applicable laws. Additional Comments Hörmann offers a comprehensive, competitive benefit package including medical, dental, vision, life, and supplemental insurance plans, 401(k) with employer match, as well as vacation and holiday pay. Hörmann is a drug-free workplace. All offers of employment will be contingent on successfully passing a criminal background check and a pre-employment drug test.