Production team member jobs in Lowell, MA - 845 jobs

Job Title: Manufacturing Associate Duration: 12 months + will be extended. Work Schedule: 12 Hour Night Shift (7 pm - 7 am) - rotating days - every other weekend. The Manufacturing Associate is responsible for the manufacturing of therapeutic proteins under cGMP conditions. Associates are expected to execute process recipes, follow written procedures (SOPs), monitor equipment and processes, perform basic laboratory tasks, including pH, conductivity, sampling, and conduct routine sanitization tasks to maintain facility and equipment. Duties: They are expected to attain a basic understanding of cGMP compliance while training under close supervision, demonstrating aseptic technique in handling of products and materials. Set up, operate equipment, and monitor production processes, including clean-in-place (CIP) and steam-in-place (SIP) operations and report production in written and electronic documents in accordance with good manufacturing practice (GMPs) and good documentation procedures (GDPs), review documentation as appropriate. Perform basic laboratory tasks, such as monitor pH, conductivity, test product samples, etc. Perform material movements, transfer raw materials, chemicals into, out of, across the production areas. Maintain facility and equipment through routine cleaning and sanitization, support 6S programs. Must be willing to gown and work in a clean room environment. Perform other duties as assigned. Education: High School Diploma.

At indi GO Technologies (Tradename: “GO”), we are changing the electric vehicle paradigm with our own class of ultra-efficient electric vehicles for ride hailing and last-mile delivery use cases. The indi GO line of purpose-built EVs provides the smoothest, roomiest, and most affordable ride using patented SmartWheel technology. Our technology combines premium suspension, a spacious cabin, and low cost-per-mile performance to enable truly sustainable transportation. We are seeking an experienced Manufacturing Operations specialist to help establish and scale-up our manufacturing capabilities. This role will help manage manufacturing facility infrastructure, implement production processes, perform manufacturing project management, and participate in the implementation of manufacturing practices to deliver world-class efficiency, quality, and cost control. Responsibilities: Manufacturing facility setup, layout optimization, and equipment commissioning. Function as part of a high-performing production team. Implement manufacturing best practices and continuous improvement initiatives. Collaborate with product and engineering to integrate manufacturing considerations early in product design. Develop and manage schedules to meet volume ramp-up targets. Track key manufacturing KPIs for efficiency, quality, and cost. Help ensure health, safety, and environmental compliance across operations. Requirements: Bachelor's degree in manufacturing, mechanical, or industrial engineering; Master's preferred. 5+ years in manufacturing operations Experience scaling manufacturing from prototype to volume production. Knowledge of lean manufacturing, Six Sigma, or similar process optimization methodologies. Experience in automotive or complex electromechanical assembly highly preferred. Strong leadership, problem-solving, and organizational skills. Qualified candidates working from our EV facility and HQ in Woburn, MA (20 minutes from downtown Boston) are preferred and will be prioritized. Note that only experienced and qualified candidates should apply, and also state whether they can either work full time in Woburn MA or are open to relocation to the NorthEast area. We are looking for like-minded individuals on our movement to truly impact sustainability. Join us on our mission to change the EV paradigm! indi GO Technologies offers competitive salaries, stock options, flexible hours, and a 401K plan. We support a diverse team, knowing that innovation truly thrives with a variety of backgrounds and experiences. Job Title and Compensation The salary range for this position is between $117,000 and $132,000, based on full-time employment. Actual salaries are based on several factors unique to each candidate, including but not limited to skill set, experience, certifications, and work location. Our open positions are based on job competencies that are specific to each role. If you are offered a position, the job title may be different from what is advertised to align with the role's competencies and your specific background, experience, and interview results. indi GO Technologies is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law.

Since its inception over a decade ago, CRISPR Therapeutics has transformed from a research-stage company advancing programs in the field of gene editing, to a company with a diverse portfolio of product candidates across a broad range of disease areas including hemoglobinopathies, oncology, regenerative medicine, cardiovascular and rare diseases. The Nobel Prize-winning CRISPR science has revolutionized biomedical research and represents a powerful, clinically validated approach with the potential to create a new class of potentially transformative medicines. To accelerate and expand its efforts, CRISPR Therapeutics has established strategic partnerships with leading companies including Vertex Pharmaceuticals. CRISPR Therapeutics AG is headquartered in Zug, Switzerland, with its wholly-owned U.S. subsidiary, CRISPR Therapeutics, Inc., and R&D operations based in Boston, Massachusetts and San Francisco, California. Position Summary Reporting to the Manufacturing Sr Manager, the Manufacturing Associate will perform manufacturing activities associated with LNP GMP manufacturing within a state-of-the-art manufacturing facility at 33 New York Ave in Framingham, MA. A successful candidate will be responsible for the manufacture of LNP therapies for clinical studies and as a commercial product. This role requires clear communication across multiple departments for the execution of daily activities. The ideal candidate will have experience successfully performing formulated LNP Manufacturing within a GMP environment. Responsibilities Perform clinical / commercial product manufacturing for LNP therapies according to cGMP standards and SOPs including Lipid and RNA Prep, T-Mix, and TFF operations Perform aseptic vial filling, visual inspection, cryopreservation, process reagent formulation, and material kitting. Transfer raw material inside cleanroom suite using sanitizing reagents or equipment. Participates in technology transfer from Process Development to the Manufacturing group. Assist in the life cycle development of Standard Operating Procedures (SOPs) for manufacturing in collaboration with PD / MSAT and Quality Systems groups. Ensures all materials and equipment are identified and available in time for manufacturing operations. Execute standard work per manufacturing schedule Participate in Quality investigations and resolutions. Ensure cGMP compliance through consistent execution. Other duties and projects as assigned to meet departmental requirements. Minimum Qualifications Certificate, associate's degree or higher in biological sciences or related fields and 2-5 years of relevant Manufacturing experience or related fields Available to work a flexible schedule as needed. Ability to don cleanroom garments and work within a classified environment (Grade B and C) Knowledge of GMP and industry standards T-Mix and TFF experience preferred Fluency in Windows and Microsoft Office applications Attentive to detail and accuracy Ability to effectively communicate and collaborate with internal stakeholders is essential Ability to work effectively in a collaborative team environment where results are achieved through influence and the incorporation of multiple points of view. Ability to execute and follow-through to completion Ability to lift 40 pounds Ability to stand for 6 hours in a clean room environment Self-driven, independently motivated, data driven and excellent problem-solving ability Competencies Collaborative - Openness, One Team Undaunted - Fearless, Can-do attitude Results Orientation - Delivering progress toward our mission. Sense of urgency in solving problems. Entrepreneurial Spirit - Proactive. Ownership mindset. Due to the nature of their work, our manufacturing and lab-based positions are located fully on-site. Manufacturing Associate: Base pay range of $35.00 per hour to $42.00 per hour + bonus, equity and benefits. The range provided is CRISPR Therapeutics' reasonable estimate of the base compensation for this role. The actual amount will be based on job-related and non-discriminatory factors such as experience, training, skills, and abilities. CRISPR Therapeutics, Inc. is committed to equal employment opportunity and non-discrimination for all employees and qualified applicants without regard to a person's race, color, gender, age, religion, national origin, ancestry, disability, veteran status, genetic information, sexual orientation or any characteristic protected under applicable law. To view our Privacy Statement, please click the following link: ***********************************************

We're hiring a Production Operator to work in a clean, supportive manufacturing environment. In this role, you'll be hands-on with the assembly, testing, and repair of life-saving products such as pacemakers, ICDs, and related devices. You'll be trained on precise processes and work closely with a supervisor to ensure every product meets strict quality standards. What You'll Do Assemble, test, and inspect medical device components with a high level of attention to detail. Follow written procedures and verbal instructions to ensure accuracy and compliance. Keep production records accurate and up to date to maintain full product traceability. Work with your supervisor to meet quality, safety, and performance goals. Participate in continuous improvement initiatives to make processes safer and more efficient. Communicate clearly with teammates and leadership about issues, solutions, and ideas for improvement. What We're Looking For High school diploma or equivalent required. Strong attention to detail and the ability to follow written procedures closely. Comfort working with small parts and components. Basic computer skills;able to learn and use data collection systems. Positive attitude and willingness to be part of a team. Some experience in manufacturing or assembly is helpful, but not required-you'll receive thorough training.

Shift: D Shift: Thursday, Friday, Saturday alt. Wednesday 5:40pm-6:00pm Please Note: We do have required overtime. Interview: Onsite interview This person is a member of a crew that operates two production lines.You will work with your shift to safely produce high quality product in a fast pace continuous operation environment. The expectation for a winder operator is to deliver quality packaging and products for our customers. Principal Duties And Responsibilities: Plant and Environmental Safety Lives the Safety Standard and meets all safety requirements. Safety is a condition of employment. Take personal ownership to work safely and hold other team members to the same high standards of safety Safer together. Notify supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem. Participates in the safety, quality, autonomous maintenance (AM), TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc. Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal. Complies with all plant rules and safety regulations. Performs cleanup duties at workstations and/or equipment/machinery. Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec. Inspect vehicles and other PIV equipment before use and throughout shift, keeping all equipment clean and operational. TPM Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S). Must be an active member of an AM and or Pillar team. Continues to use TPM methodology to gain a better understanding of the equipment. Identifies and participates proactively in learning opportunities and develops expertise in those areas. Utilizes Focus Improvement (FI) tools to problem solve. Works to achieve zero injuries, zero defects and zero losses. During PM days, uses time effectively to bring equipment to optimal condition for zero losses. Maintain DMS and AM Team Area Activity Boards. Quality Perform winder, EDL, and conveyor quality checks and documentation at specified intervals. Maintain control panel adjust speed, delays, and other timers if needed. Interface with plant employees to provide quality control (QC) information. Monitor and report unusual or suspect material issues not within specifications. Communicate with all coater end operators concerning shift production Communicate with all back-end operators concerning quality problems Understand and react to upset conditions. Evaluate all finished product for proper weight and/or thickness. Productivity Have a basic understanding of product process. Operate Winders and packaging machines on both lines. Operate banding equipment. Print and apply pallet labels Load and stack reworked material. Manage and accurately report the amount of scrap and seconds for tracking. Relieve crew members from duties for breaks Manage trash. Listen for alarms and responds appropriately to the various alarm signals. Assist in repair of web breaks. Assist in all threading, product change procedures. Perform PM to AM task transfers on down days. Other Demonstrate the ability to effectively communicate. Support the training and development of colleagues. Demonstrates flexibility to changing priorities as business needs dictate. Identifies and participates proactively in learning opportunities and develops expertise in those areas. Follows standard operating procedures and processes. Can and is willing to make decisions. Knows the chain of command to get support. Regular attendance on site and the ability to rotate varying shifts. All other duties as assigned or needed. Skills and abilities The employee should hold the following skills and abilities: Demonstrated desire to impact safety Must be able to work independently or in a team atmosphere with minimal direct supervision Demonstrated mechanical aptitude and the ability to troubleshoot High attention to detail Demonstrated ability to multi-task Basic mathematics skills Able to effectively communicate (read, write, speak, understand) English Computer And Software Competencies The employee must be able to: Work with a computer to perform basic data entry Demonstrate basic computer skills such as Microsoft Excel, Outlook, Pallet labeling system (MII), Ignition and SAP. Education And / Or Experience High School Diploma or GED Equivalent. Manufacturing or process related experience preferred. Essential Physical Requirements/Work Environment Must: Be at least 18 years old. Remain drug free. Have work schedule flexibility (possible rotating shifts; mandatory overtime). Effectively and efficiently perform up to 12-hour shifts (with breaks) in an industrial manufacturing environment: While wearing applicable / mandatory PPE. With exposure to: Extreme temperature variation. Sounds or noise levels that may be uncomfortable (hearing protection is provided). Prolonged sitting, standing, walking, and/or using full upper / lower body movement for process. Ink / dust / dirt / fumes. With the ability to: Distinguish colors and shading. Handle, control, feed, or feel objects, tools, or product. Climb / descend stairs / ladder, and / or work from heights as needed. Become certified to operate a forklift (if/as needed). Repetitively and freely: Perform movements of body, hand, arm, leg. Bend, twist, squat, walk, sit, stand; to include waist, back and knee motion. Lift, push and pull 40lbs. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an at will relationship.

Job DescriptionDescription: Streamline Glass, a privately-owned, brand new glass manufacturing company in Newton, NH, is seeking a Production Operator to help drive our largely automated, state-of-the-art glass manufacturing facility. In this role, you'll oversee advanced machinery, ensure seamless production flows, and maintain the highest standards of quality and safety. Working alongside management and technical teams, you'll support new equipment integration, troubleshoot issues, and keep our automated systems running at peak efficiency. Please note that work for this position will begin in late February. Responsibilities: Operating and monitoring automated machinery Maintaining streamlined production workflows and enforcing quality standards Assisting in setup and optimization of new equipment and processes Troubleshooting and performing minor maintenance to keep systems running smoothly Applying Diamon-Fusion coating to glass products If you enjoy working in a team environment, are detail-oriented and safety-focused, this may be the job for you! Why Join Streamline Glass? Generous PTO, health insurance, dental, vision, 401k Next-generation automated manufacturing systems redefining industry standards Cutting-edge equipment in a modern, innovation-driven facility Mentorship from industry veterans and collaboration with ambitious newcomers Ground-floor opportunity to grow with a pioneering company Requirements: Proficient technical skills; comfortability with technology and automated systems Ability to safely lift 75lbs Ability to perform physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials Experience with safety protocols, collaborating effectively, and communicating clearly within dynamic, team-oriented environments Prior experience in the glass industry is a plus but not required Streamline Glass complies with all applicable federal, state, and local employment laws. We are an Equal Opportunity Employer and do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other status protected by law. All employment decisions are made in accordance with these legal requirements, and we encourage individuals from all legally protected groups to apply.

Working at Freudenberg: We will wow your world! Responsibilities: Produce/package/label all products to meet or exceed all quality specifications per shop order, QCIC's and all other required documents provided. Operates various manufacturing and measurement equipment in a safe and orderly manner and notifies Lead/Supervisor when operating problems occur or standards cannot be met. Meet or exceed all due dates assigned to the manufacturing shop order. Responsible for all products manufactured. Understanding of documentation system including reading comprehension, writing and how to complete documents accurately. May assist engineering or manufacturing technicians with validation of processes, product and tooling. Understand and follow gowning processes and procedures while maintaining a clean and presentable work station. Physical Requirements: Involves sitting, standing and/or walking, with frequent ability to exert up to 15 pounds of force to move objects and occasionally exert up to 30 pounds of force to move objects. Qualifications: Must have high school diploma or equivalent Manufacturing experience preferred The Freudenberg Group is an equal opportunity employer that is committed to diversity and inclusion. Employment opportunities are available to all applicants and associates without regard to race, color, religion, creed, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity or expression, national origin, ancestry, age, mental or physical disability, genetic information, marital status, familial status, sexual orientation, protected military or veteran status, or any other characteristic protected by applicable law. Freudenberg Medical LLC

Summary:We are looking for a highly motivated and detail-oriented Production Assembler to join our team. As a Production Assembler, you will be responsible for assembling components and subassemblies of industrial air compressors and vacuum systems in a fast-paced, quality-driven environment. Key Responsibilities: Assemble and test components for industrial air compressors and vacuum systems according to technical drawings, specifications, and safety standards. Ensure proper functionality of components, parts, and assemblies, conducting quality checks and troubleshooting as needed. Operate hand tools, power tools, and other machinery used in the assembly process. Maintain a clean, organized, and safe work environment by following company safety protocols. Work closely with other team members to meet production goals and deadlines. Ensure accurate record-keeping of completed work, inventory, and parts used during assembly. Follow all company policies regarding product quality, safety, and productivity. Qualifications: High school diploma or equivalent; technical training or certification is a plus. Previous experience in mechanical assembly or a similar production environment preferred. Ability to read and interpret technical drawings, blueprints, and work instructions. Strong attention to detail with a focus on producing high-quality work. Ability to work independently and as part of a team. Basic knowledge of hand tools and power tools. Strong problem-solving skills and the ability to troubleshoot mechanical issues. Physical Requirements: Ability to lift up to 50 pounds regularly. Ability to stand, bend, and move for extended periods. Comfortable working in a manufacturing environment with noise, heat, and moving machinery.

Job Description Job Title: Production Worker - Level I Pay Rate: $19.00/hour Shift: 1st Shift | [Insert hours, e.g., 6:00 AM - 2:30 PM] Schedule: Monday - Friday We are seeking a dependable and hardworking Production Worker Level I to assist with daily processing of customer orders. This entry-level role involves basic production, packaging, and warehouse tasks. Training is provided. Key Responsibilities: Prepare the production and loading areas for daily operations Use an electric pallet jack to move, stack, load, and unload products Make boxes and handle packaging materials Weigh, count, or scale products for customer orders Pack and label items according to order requirements Handle and distribute ice for storing temperature-sensitive products Clean processing areas and dispose of waste properly Monitor inventory supplies and ice machine as needed Follow safety protocols and procedures Perform other duties as assigned Qualifications: Basic understanding of warehouse or production tasks Ability to lift up to 100 lbs occasionally and 50 lbs frequently Able to work in cold environments (super freezer at -70°ree;F) Comfortable standing, bending, and lifting throughout the shift Able to operate electric pallet jacks and basic equipment (training provided) Reliable and punctual with a strong work ethic Work Environment: Cold storage and production areas May work in slippery or wet conditions Physically demanding role with heavy lifting and repetitive tasks Team-based environment with a focus on quality and efficiency Powered by JazzHR zm7647TPCd

Your Job Georgia-Pacific is looking for motivated individuals to join our team as Machine Operators in Leominster, MA, in the production of Dixie brand cutlery. Machine Operators create value by working as a team to ensure the safe operation of automation systems and injection molding machines to create a quality product. These are exciting positions with opportunities for growth and advancement. Our Machine Operators adhere to all plant safety and environmental guidelines, policies and procedures and work 12-hour night shifts (7pm-7am), including holidays, weekends and overtime as needed. Our Team Are you looking for a career with a company that values growth from within? Are you looking for a career rather than a job? Do you enjoy working in a team environment to meet production and quality goals? Then a Machine Operator position at Georgia-Pacific may be for you. Backgrounds that may fit our Machine Operator include: manufacturing, industrial, factory, plant, plastics, injection molding. Pay rate starts at $22 per hour (including shift differential). What You Will Do Operate mobile equipment and vehicles safely and efficiently Conduct routine maintenance tasks and changeovers as required Conduct inventory checks and order necessary components Conduct required quality checks and inspections to ensure product specifications are met Conduct routine maintenance tasks and changeovers as required Assist associates and craft workers with equipment operation and repair Who You Are Experience using a computer, tablet, or smart device in a work environment 1 year or more experience as a Machine Operator Fluent in reading, writing and speaking English What Will Put You Ahead Experience in a manufacturing, industrial, agricultural, fishing, construction, logging or military environment OR completion of post high school education in a manufacturing/industrial centered program At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here . Who We Are As a Koch company and a leading manufacturer of bath tissue, paper towels, paper-based packaging, cellulose, specialty fibers, building products and much more, Georgia-Pacific works to meet evolving needs of customers worldwide with quality products. In addition to the products we make, we operate one of the largest recycling businesses. Our more than 30,000 employees in over 150 locations are empowered to innovate every day - to make everyday products even better. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives. We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region. If you have questions on what benefits apply to you, please speak to your recruiter. Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please visit the following website for additional information: ****************************************** quí , or tu ).

**Roles and Responsibilities:** JOB TASKS MAY INCLUDE + Setting-up and operating inspection and/or manufacturing tools/equipment such as conventional electrical discharge machines, grinders, precision assembly devices, peen machines, TIG-tack welder, heat treat, plasma spray, etc. + Performing basic mathematical calculations + Using precision gages/fixtures and inspection measuring equipment and interpreting mechanical blueprints, sketches, engineering specifications and drawings, etc., to determine set-ups and operations necessary to complete job tasks. + Training duties. + Performing related environmental, health, safety, maintenance, quality, continuous improvement, and production-flow job duties to support plant machinery, equipment, and manufacturing-related initiatives and programs. + Maintaining detailed job task documentation, reports, and records. MINIMUM QUALIFICATIONS: + High school diploma/GED with a minimum of 1-year of experience in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering; Or + Bachelor's degree, Associate's degree or Technical certificate from an accredited university or college in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering. DESIRABLE QUALIFICATIONS + Set-up and operation of machine/manufacturing tools and equipment. + Reading and interpreting mechanical blueprints, drawings, engineering specifications, etc. + Performing basic mathematical calculations. + Use of manufacturing/machine tool measuring equipment and gages. + Lean Six Sigma fundamentals. + EH&S processes and procedures. + Oral and written communication skills. + Demonstrated ability in maintaining relationships by recognizing needs and sensitivities of others, and cooperating and resolving conflicts that inspire the Team in achieving objectives and deliverables. + Demonstrated ability in receiving guidance and supervision, following work rules, safety practices, work procedures; meeting deadlines; and punctuality and attendance standards. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The Panther Group is seeking a 5DX Machine Operator to perform inspection of product run through Automated 5DX x-ray inspection equipment as it is manufactured on the SMT line. Essential Duties & Responsibilities Verify process compliance to established 5DX programs with respect to selecting programs, identifying failures called out by the program and entering defect data into OCuity, as well as data transfer between 5DX and PLR. Adhere to all ESD requirements and Board Handling. Use of Moisture Sensitive Device (MSD) handling requirements based on the components' moisture sensitive levels (MSL). Verify product compliance to workmanship standards as documented in work instructions. Verify integrity of data collected by machinery. Communicate defects not captured by equipment to responsible personnel for enhancement of program integrity. Communicate to assembly operators defects being noted during the 5DX program review. Support and follow all ISO standards related to company's various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security. Support all corporate and site 5S objectives. Perform all other duties, as assigned. Qualifications Job Knowledge, Skills & Abilities: Ability to utilize electronic manufacturing system (OCuity) Computer proficiency. Knowledge of Automated Optical Inspection equipment and procedures. Pass IPC-A-610 Modules 1, 2. Ability to work on single task / procedures / products. Highly repetitive or routine duties Ability to support 1-2 product lines / customer(s) Normally receives detailed instructions on work Works under close supervision Education: High School Diploma or GED. Experience Levels: Entry-Level: 0-6 months of related experience. Experienced: 2+ years of related experience. Technical or vocational certification may substitute for experience. Pay $20 - $26 / hour W2, depending on experience #INDENG

Job Description At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands-including Curaleaf, Select, and Grassroots-offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Title: Production Technician Pay Rate: $17.00/hr Location: Webster, MA Job Type: Full Time | Non-Exempt Shift: 7am - 3:30pm Who You Are: You're a hands-on production pro who thrives in a fast-paced, quality-driven environment. With an eye for detail and a steady focus on consistency, you take pride in packaging and labeling premium cannabis products-from dried flower and pre-rolls to vape cartridges, pens, and infused items. You enjoy working with clear procedures, following safety and compliance standards, and collaborating with teammates to keep operations running smoothly. Your reliability and commitment to accuracy ensure every finished product meets Curaleaf's high standards before it reaches our customers. What You'll Do: As a Production Technician at Curaleaf, you'll play a key role in delivering high-quality cannabis products by supporting every stage of the packaging process. In this fast-paced, hands-on role, you will: Stage products and packaging materials across production lines while performing quality assurance checks to meet daily schedules and Curaleaf's high standards Boost operational efficiency and minimize waste by taking ownership, collaborating with the team, and communicating effectively Conduct in-process and final quality checks, including testing, visual inspections, and precise weighing, while maintaining 100% compliance in data recording, product tracking, and secure packaging Work quickly and efficiently to boost productivity while keeping the extraction room organized, clean, and inspection-ready Operate efficiently while following OSHA standards, Curaleaf SOPs, and all required procedures, ensuring every product is accurately labeled and fully compliant with state regulations What You'll Bring: You are eager to learn and can be trained on various production equipment and SOPs while consistently meeting performance expectations set by leadership You bring strong attention to detail and effective communication skills, thriving in a fast-paced, team-based production environment You can comfortably perform repetitive tasks with focus and consistency over extended periods You have a strong work ethic, are punctual and reliable, and help maintain a positive, professional team environment You have a high school diploma, GED, or equivalent Even Better If: You have at least one year of manufacturing or packaging experience focused on product safety, consumer satisfaction, and delivering high-quality results Physical Requirements Ability to stand, sit, and walk for extended periods of time (8-10 hours per shift) Ability to lift and carry up to 50 pounds regularly and occasional lifting of heavier items with assistance Frequent and repetitive use of hands and wrists for extended periods of time Repetitive bending, squatting, and reaching Ability to climb ladders or step stools to access plants or equipment Ability to use required PPE when required, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary Environmental Conditions Exposure to environments with high humidity, varying temperatures, and strong odors (such as cannabis) Exposure to soil, water, fertilizer, dust, pollen and plant pathogens Exposure to cleaning solvents, such as high volumes of isopropyl alcohol Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels Massachusetts Hiring Range$17-$17.50 USD What We Offer: Career Growth Opportunities Competitive Pay and Benefits Generous PTO and Parental Leave 401(K) Retirement Plan Life/ Disability Insurance Community Involvement Referral Bonuses and Product Discounts Benefits vary by state, role type, and eligibility. Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: Lead and Inspire. Commit to Win. ONE Curaleaf. Driven to Deliver Excellence. Curaleaf is an equal opportunity employer. Curaleaf recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status, and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

First Shift 7:00 AM - 3:30 PM Hourly Rate $21.00 Under the general direction of the Production Manager, the primary role of the Production Technician involves the mixing and casting of materials to create syntactic foam materials. Other production responsibilities around the plant may be assigned as workload permits. ESSENTIAL JOB FUNCTIONS Mixing & Casting: * Understands safety and procedural issues for mixing process * Reads and understands the production process instruction sheet and identifies all relevant equipment * Reads and understands batch card and identifies all chemical components. * Ensures material availability for upcoming production * Ensures equipment availability for upcoming mixes (mixers and ovens) * Identifies and inspects molds for casting (preparation, release, and maintenance) * Measures and mixes HYTAC and ESS batch needs * Coordinates/arranges material for pre-heating of chemicals * Weighs out ingredients, pours premixed materials into bowl and transfers balloons into bowl * Records batch/lot card and process information on the batch card * Performs mixing and vacuum pressure process following established procedures * Transfers finished mixture into transfer tanks and/or molds * Transfer mix from transfer tanks into molds * Optimizes positioning of filled molds in ovens and selects/executes proper cure cycle * Cleans and maintains mix and weighing equipment * Monitors cure of parts through cycle, recording batch details * Prepares mixer and mold PM schedules * Participates in inventory assessment of raw materials and data collection * Evaluates supplies status and notifies or orders supplies * Participates in Safety Training * Adhere to Business Management System requirements Mold Prep, Fill and Demold: * Understands safety and procedural issues for mold prep and demolding process * Identifies all relevant equipment * Reads and understands the batch cards along with mix and oven schedules to identify which molds will require demolding and preparation on a daily basis * Identifies and schedules the trimming requirements of block, sheet and rod products * Identifies proper mold releases and cleaners HYTAC: * Coordinates demolding of product and transfer to inspection * Identifies and prepares rod, sheet and block molds required for daily use * Prepares molds to eliminate sticking and cracking * Schedules and performs mold rework when necessary * Assist in injection of mix into molds when required Block: * Coordinates and/or assists in demolding of blocks and trimming after gelation including transfer of demolded blocks to secondary cure * Identifies and prepares block molds required for daily use ensuring quality of finished product by properly preparing molds to eliminate sticking and cracking * Assists in injection transfer of mix into molds when required MacroCore/MacroFoam: * Coordinates and/or assists in demolding of blocks and trimming after gelation including transfer of demolded blocks to secondary cure * Identifies and prepares block molds required for daily use ensuring quality of finished product by properly preparing molds to eliminate sticking and cracking * Properly loads molds with macrospheres, seals molds and check vacuum integrity * Preps injection hoses and fixtures for pour * Assists in injection/transfer of mix into molds when required General: * Prepares preventative maintenance schedule and performs mold rework as necessary * Evaluates supplies status and notifies or orders supplies * Participates in Safety Training * Adhere to Business Management System requirements TYPICAL EQUIPMENT USED: Chemical mixers, Various hand tools, Vacuum chambers, Scales, Volumetric measurement devices, Viscometer, Ovens, Dollies/carts/forklifts/other tools for moving heavy-weight EDUCATION AND EXPERIENCE: * High school diploma or equivalent required. * Manufacturing experience preferred. PHYSICAL DEMANDS: * Must be able to lift, push and pull greater than 50 pounds. With the occasional need to lift up to 100 pounds * Must be able to stand for long periods of time. * Must be able to walk through a large manufacturing environment. * Must be able to use hand tools * Constant use of hands to handle, control or feel objects, tools, or controls. * Repetitive hand and arm movements. * Occasional bending and twisting. * Frequently moving about to accomplish tasks. * Constantly communicating with others to exchange information. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. * Must be able to wear PPE as necessary (safety glasses, respirator, hearing protection, steel toe shoes, etc.). WORK ENVIRONMENT: Majority of work is performed in a manufacturing environment with noise levels within safety limits and acceptable lighting and temperature conditions. WORK AUTHORIZATION/SECURITY CLEARANCE: To conform to U.S. Government export control regulations and the Naval Nuclear Propulsion Information restrictions, applicant must be a U.S citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorization from the U.S. Department of State or Department of Commerce. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. GLOBE COMPOSITE SOLUTIONS IS AN EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER THAT VALUES THE STRENGTH DIVERSITY BRINGS TO THE WORKPLACE. APPLICANTS ARE CONSIDERED ON THE BASIS OF SKILLS, EXPERIENCE, AND QUALIFICATIONS WITHOUT REGARD TO RACE, COLOR, RELIGION CREED, SEX, SEXUAL ORIENTATION, AGE, NATIONAL ORIGIN, ANCESTRY, MARITAL STATUS, PHYSICAL AND MENTAL DISABILITY, PROTECTED VETERAN STATUS, MEDICAL CONDITION, GENETIC INFORMATION OR CHARACTERISTICS, GENDER AND GENDER IDENTITY, OR ANY OTHER LEGALLY PROTECTED STATUS, AND FOR INQUIRING ABOUT, DISCUSSING OR DISCLOSING COMPENSATION.

As Business Unit Automotive & Speciality Lamps we support our vision and strategy by expanding our leading position in the automotive lighting market in OEM and Aftermarket. We are in a global leadership position in the automotive lamps business in traditional and LED applications and offer industry leading products in LED lighting to global OEM customers (e.g. with exchangeable LED light sources). We also tackle new growth opportunities in the Aftermarket with our automotive care and equipment portfolio. * Operate lamp making equipment in the manufacturing environment under limited supervision. * Be proficient at operating and understanding the machine functions and supporting the daily requirements. * Will be required to utilize various forms of testing equipment and follow direction through verbal and written instructions daily. * Will be required to maintain the appropriate production, quality, PM and SPC for assigned position, and to interact with the machines' information systems. * Train new associates as required. Why You'll Love It Here: * Competitive Wages - We invest in our employees' health and well-being by including rewards & incentives built into our already robust compensation & benefit package * Growth Opportunities - With continuous training and tuition reimbursement to aid your development, your career will never stand still. We have structured career paths to get you to exactly where you want to go! * Fun Culture - Enjoy team-building activities, company events, and a positive, inclusive atmosphere. * Innovative Spirit - Be part of a culture that encourages your ideas and implements employee feedback into daily operations. * Benefits Package - Comprehensive and affordable health, dental, and vision plans available day one, plus a 401 (k) with up to a 6% company match fully vested after 30 days! * Work-Life Balance - Varied shifts to fit your lifestyle, 17 days' PTO, and 11 paid holidays. * Even more perks - Onsite gym, Employee Assistance Program, BenefitHub Employee Perk Program 3rd Shift Machine Operator -11pm-7am Pay Rate: $16.50/hour $3.00 shift differential $1 / hour raise after 6-month successful review * Preferred experience in a leadership role * Must be able to fulfill the physical requirements of the job * Must be well organized, detail oriented, and time oriented

Are you looking to build your career in machining and manufacturing? We're seeking a CNC Machine Operator to join our team and play a key role in keeping production running smoothly. In this role, you'll work hands-on with CNC machines, ensuring quality parts are produced to spec while learning and growing your technical skills. What You'll Do: •Load and unload CNC machines and ensure parts meet quality standards. •Inspect parts and troubleshoot basic issues during production. •Read and interpret blueprints and drawings to complete jobs accurately. •Use measuring tools such as micrometers, calipers, indicators, and gauges. •Maintain safety and quality standards in a fast-paced production environment. What We're Looking For: •High school diploma or equivalent. •2+ years of CNC or machining experience preferred, but not required-we're willing to train the right person. •Basic machining knowledge and ability to use common inspection tools. •Strong work ethic, reliability, and ability to work independently with minimal supervision. •Team-oriented mindset and commitment to safety and quality. •Must be authorized to work in the U.S. Full-time.

Shift: B Shift: Sunday, Monday,Tuesday alt. Wednesday 5:40pm-6:00am Please Note: We do haverequired overtime. Interview: Onsite interview This person is a member of acrew that operates two production lines.You will work with your shift tosafely produce high quality product in a fast pace continuous operationenvironment. The expectation for a winder operator is to deliver qualitypackaging and products for our customers. JOB DUTIES ANDRESPONSIBILITIES Plant and Environmental Safety Lives the Safety Standard and meets all safetyrequirements. Safety is a condition of employment. Take personal ownership towork safely and hold other team members to the same high standards of safety Safer together. Notify supervisor immediatelyof any accident, near miss or on- the -job injury when it occurs no matter howinsignificant it may seem. Participates in the safety,quality, autonomous maintenance (AM), TPM and housekeeping programs asestablished within the plant; including but not limited to Focused ImprovementEvents, Safety Committee, Training, etc. Performs job tasks to reduceenvironmental impact and adheres to the environmental regulations and recyclingprocedures for waste disposal. Complies with all plant rulesand safety regulations. Performs cleanup duties atworkstations and/or equipment/machinery. Communicates safety concernsand/or equipment problems/abnormalities to appropriate personnel, maintainingstrong communication with the appropriate line section operators to ensureimmediate action is taken for product out of spec. Inspect vehicles and other PIVequipment before use and throughout shift, keeping all equipment clean andoperational. TPM Participates in plant TPMinitiatives - completing activities associated with TPM tasks (adheres to CILTstandard, 5S). Must be an active member of an AM and or Pillar team. Continues to use TPMmethodology to gain a better understanding of the equipment. Identifies and participatesproactively in learning opportunities and develops expertise in those areas. Utilizes Focus Improvement (FI)tools to problem solve. Works to achieve zeroinjuries, zero defects and zero losses. During PM days, uses timeeffectively to bring equipment to optimal condition for zero losses. Maintain DMS and AM Team AreaActivity Boards. Quality Perform winder, EDL, andconveyor quality checks and documentation at specified intervals. Maintain control panel adjust speed, delays, and other timers if needed. Interface with plant employeesto provide quality control (QC) information. Monitor and report unusual orsuspect material issues not within specifications. Communicate with all coaterend operators concerning shift production Communicate with all back-endoperators concerning quality problems Understand and react to upsetconditions. Evaluate all finished productfor proper weight and/or thickness. Productivity Have a basic understanding ofproduct process. Operate Winders and packagingmachines on both lines. Operate banding equipment. Print and apply pallet labels Load and stack reworkedmaterial. Manage and accurately reportthe amount of scrap and seconds for tracking. Relieve crew members fromduties for breaks Manage trash. Listen for alarms and respondsappropriately to the various alarm signals. Assist in repair of webbreaks. Assist in all threading,product change procedures. Perform PM to AM tasktransfers on down days. Other Demonstrate the ability toeffectively communicate. Support the training anddevelopment of colleagues. Demonstrates flexibility to changingpriorities as business needs dictate. Identifies and participatesproactively in learning opportunities and develops expertise in those areas. Follows standard operatingprocedures and processes. Can and is willing to makedecisions. Knows the chain of command to get support. Regular attendance on site andthe ability to rotate varying shifts. All other duties as assignedor needed. JOB REQUIREMENTS SKILLS AND ABILITIES The employee should hold thefollowing skills and abilities: Demonstrated desire to impactsafety Must be able to workindependently or in a team atmosphere with minimal direct supervision Demonstrated mechanicalaptitude and the ability to troubleshoot High attention to detail Demonstrated ability tomulti-task Basic mathematics skills Able to effectivelycommunicate (read, write, speak, understand) English COMPUTER AND SOFTWARECOMPENTENCIES The employee must be able to: Work with a computer toperform basic data entry Demonstrate basic computerskills such as Microsoft Excel, Outlook, Pallet labeling system (MII), Ignitionand SAP. EDUCATION AND/OR EXPERIENCE High School Diploma or GEDEquivalent. Manufacturing or processrelated experience preferred. ESSENTIAL PHYSICALREQUIREMENTS/WORK ENVIRONMENT Must: Be at least 18 years old. Remain drug free. Have work schedule flexibility(possible rotating shifts; mandatory overtime). Effectively and efficientlyperform up to 12-hour shifts (with breaks) in an industrial manufacturingenvironment: While wearing applicable /mandatory PPE. With exposure to: Extreme temperaturevariation. Sounds or noise levels thatmay be uncomfortable (hearing protection is provided). Prolonged sitting, standing,walking, and/or using full upper / lower body movement for process. Ink / dust / dirt / fumes. With the ability to: Distinguish colors andshading. Handle, control, feed, or feelobjects, tools, or product. Climb / descend stairs /ladder, and / or work from heights as needed. Become certified to operate aforklift (if/as needed). Repetitively and freely: Perform movements of body,hand, arm, leg. Bend, twist, squat, walk, sit,stand; to include waist, back and knee motion. Lift, push and pull40lbs. This job description in no waystates or implies that these are the only duties to be performed by theemployee(s) incumbent in this position.Employee(s) will be required to follow any other job-relatedinstructions and to perform any other job-related duties requested by anyperson authorized to give instructions or assignments. A review of this position hasexcluded the marginal functions of the position that are incidental to theperformance of fundamental job duties.All duties and responsibilities are essential job functions andrequirements and are subject to possible modification to reasonably accommodateindividuals with disabilities. Toperform this job successfully, the incumbents(s) will possess the skills,aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals whopose a direct threat or significant risk to the health or safety of themselvesor others. The requirements listed inthis document are the minimum levels of knowledge, skills, and abilities. This document does not createan employment contract, implied or otherwise, other than an at willrelationship.

SummaryJob Description Roles and Responsibilities: JOB TASKS MAY INCLUDE Setting-up and operating inspection and/or manufacturing tools/equipment such as conventional electrical discharge machines, grinders, precision assembly devices, peen machines, TIG-tack welder, heat treat, plasma spray, etc. Performing basic mathematical calculations Using precision gages/fixtures and inspection measuring equipment and interpreting mechanical blueprints, sketches, engineering specifications and drawings, etc., to determine set-ups and operations necessary to complete job tasks. Training duties. Performing related environmental, health, safety, maintenance, quality, continuous improvement, and production-flow job duties to support plant machinery, equipment, and manufacturing-related initiatives and programs. Maintaining detailed job task documentation, reports, and records. MINIMUM QUALIFICATIONS: High school diploma/GED with a minimum of 1-year of experience in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering; Or Bachelor's degree, Associate's degree or Technical certificate from an accredited university or college in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering. DESIRABLE QUALIFICATIONS Set-up and operation of machine/manufacturing tools and equipment. Reading and interpreting mechanical blueprints, drawings, engineering specifications, etc. Performing basic mathematical calculations. Use of manufacturing/machine tool measuring equipment and gages. Lean Six Sigma fundamentals. EH&S processes and procedures. Oral and written communication skills. Demonstrated ability in maintaining relationships by recognizing needs and sensitivities of others, and cooperating and resolving conflicts that inspire the Team in achieving objectives and deliverables. Demonstrated ability in receiving guidance and supervision, following work rules, safety practices, work procedures; meeting deadlines; and punctuality and attendance standards. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands-including Curaleaf, Select, and Grassroots-offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Title: Production Technician Pay Rate: $17.00/hr Location: Webster, MA Job Type: Full Time | Non-Exempt Shift: 7am - 3:30pm Who You Are: You're a hands-on production pro who thrives in a fast-paced, quality-driven environment. With an eye for detail and a steady focus on consistency, you take pride in packaging and labeling premium cannabis products-from dried flower and pre-rolls to vape cartridges, pens, and infused items. You enjoy working with clear procedures, following safety and compliance standards, and collaborating with teammates to keep operations running smoothly. Your reliability and commitment to accuracy ensure every finished product meets Curaleaf's high standards before it reaches our customers. What You'll Do: As a Production Technician at Curaleaf, you'll play a key role in delivering high-quality cannabis products by supporting every stage of the packaging process. In this fast-paced, hands-on role, you will: Stage products and packaging materials across production lines while performing quality assurance checks to meet daily schedules and Curaleaf's high standards Boost operational efficiency and minimize waste by taking ownership, collaborating with the team, and communicating effectively Conduct in-process and final quality checks, including testing, visual inspections, and precise weighing, while maintaining 100% compliance in data recording, product tracking, and secure packaging Work quickly and efficiently to boost productivity while keeping the extraction room organized, clean, and inspection-ready Operate efficiently while following OSHA standards, Curaleaf SOPs, and all required procedures, ensuring every product is accurately labeled and fully compliant with state regulations What You'll Bring: You are eager to learn and can be trained on various production equipment and SOPs while consistently meeting performance expectations set by leadership You bring strong attention to detail and effective communication skills, thriving in a fast-paced, team-based production environment You can comfortably perform repetitive tasks with focus and consistency over extended periods You have a strong work ethic, are punctual and reliable, and help maintain a positive, professional team environment You have a high school diploma, GED, or equivalent Even Better If: You have at least one year of manufacturing or packaging experience focused on product safety, consumer satisfaction, and delivering high-quality results Physical Requirements Ability to stand, sit, and walk for extended periods of time (8-10 hours per shift) Ability to lift and carry up to 50 pounds regularly and occasional lifting of heavier items with assistance Frequent and repetitive use of hands and wrists for extended periods of time Repetitive bending, squatting, and reaching Ability to climb ladders or step stools to access plants or equipment Ability to use required PPE when required, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary Environmental Conditions Exposure to environments with high humidity, varying temperatures, and strong odors (such as cannabis) Exposure to soil, water, fertilizer, dust, pollen and plant pathogens Exposure to cleaning solvents, such as high volumes of isopropyl alcohol Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels Massachusetts Hiring Range$17-$17.50 USD What We Offer: Career Growth Opportunities Competitive Pay and Benefits Generous PTO and Parental Leave 401(K) Retirement Plan Life/ Disability Insurance Community Involvement Referral Bonuses and Product Discounts Benefits vary by state, role type, and eligibility. Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: Lead and Inspire. Commit to Win. ONE Curaleaf. Driven to Deliver Excellence. Curaleaf is an equal opportunity employer. Curaleaf recruits, employs, trains, compensates, and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status, and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.