Project engineer jobs in Byram, MS

What if you were given the opportunity and responsibility to make a difference? At International Paper, you control your destiny. We offer challenging assignments and total rewards in countries around the world. When we say infinite possibilities, we mean it. Apply now and join a community that improves people's lives, the planet and our company's performance by transforming renewable resources into products people depend on every day. **Project Engineer - Packaging Solutions North America (PSNA) Engineering** **Position Title:** Project Engineer **Pay Rate: $115,000 - $134,000** _Multiple factors, including Individual experience, skills and abilities will determine where an employee is ultimately placed in the pay range._ **Category/Shift:** Salaried Full-Time **Physical Location:** Memphis TN. Does not require relocation to Memphis. Must live near an US airport as this position requires approximately 50% travel. **The Job You Will Perform:** + Responsible for engineering and managing the installation of equipment within corrugated manufacturing facilities. + Directly responsible to assure all capital and repair projects assigned are installed as per the project scope, schedule, cost estimate and budget, and with minimum plant production interference. + Reports to the Project Engineer Lead in PSNA Engineering. The PL of this role may vary (PL 14, 15 or 16) according to candidate skill set and experience. + Lead the project management of multiple, concurrent projects involving installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Project management responsibilities include organizing/planning, scoping & bidding, coordination of schedule, and managing the project to fruition. + Perform detailed engineering for installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Travel to sites as needed to manage major and minor projects & equipment installations. + Act as the subject matter expert and discussion partner to Packaging Solutions North America (PSNA) facilities on all aspects of the corrugated manufacturing process, and project implementation. **The Qualifications, Skills and Knowledge You Will Bring:** + BS degree or equivalent experience in engineering or related business discipline. + 5+ years corrugated box industry experience including a detailed understanding of corrugated equipment, the corrugating process and applicable OSHA health & safety policies/laws. + Requires understanding of engineering process and the mechanical, electrical, and scheduling/organizational requirements for corrugated equipment installations. + Proficiency in Microsoft Office Suite, including Microsoft Project. + Proficiency with AutoCAD software to create, view and modify drawings for comparative evaluation and final project construction/installation; utilize AutoCAD software to create and modify plant layouts, equipment layouts & foundation drawings for contractor bid packages. + Advanced project management skills with experience managing multiple, current, major and minor engineering projects. + Ability to communicate technical concepts effectively to all levels of company management. + Knowledge and understanding of contractor services - mechanical, electrical, and structural. + Organizing + Time Management + Priority Setting + Action Oriented + Decision Quality + Problem Solving + Functional /Technical **The Benefits You Will Enjoy:** International Paper offers a benefits package that includes health, welfare and retirement plans including Medical, Dental, Life insurance, Flexible Spending Accounts, Short-term and Long-term Disability, 401(k), Company-funded retirement contributions, Paid Time Off, Education & Development (including Tuition Reimbursement), Student Loan Repayment Assistance, and Voluntary Benefits including insurance for home, auto, vision and pets. **The Career You Will Build:** Sales and Leadership training, promotional opportunities within a global company **The Impact You Will Make:** We continue to build a better future for people, the planet, and our company! IP has been a good steward of sustainable practices across communities around the world for more than 125 years. Join our team and you'll see why our team members say they're **Proud to be IP** . **The Culture You Will Experience:** International Paper promotes employee well-being by providing safe, caring and inclusive workplaces. We have team members all around the world with diverse backgrounds, experiences, and perspectives. These are our strengths. We are committed to creating a culture where all individuals are respected, valued, engaged and have an opportunity to do their best work every day. We invite you to bring your uniqueness, creativity, talents, experiences, and safety mindset to be a part of our increasingly inclusive and diverse culture. **The Company You Will Join:** International Paper (NYSE: IP) is the global leader in sustainable packaging solutions. With company headquarters in Memphis, Tennessee, USA, and EMEA (Europe, Middle East and Africa) headquarters in London, UK, we employ more than 65,000 team members and serve customers around the world with operations in more than 30 countries. Together with our customers, we make the world safer and more productive, one sustainable packaging solution at a time. Net sales for 2024 were $18.6 billion. In 2025, International Paper acquired DS Smith creating an industry leader focused on the attractive and growing North American and EMEA regions. Additional information can be found by visiting internationalpaper.com International Paper is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. International Paper complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact reasonable.accommodations@ipaper.com or **************. Memphis TN 38197 Share this job: Location: STATE WIDE, AL, US, #STATE WIDE, NC, US, #STATE WIDE, NM, US, #STATE WIDE, TN, US, #STATE WIDE, MS, US, #STATE WIDE, NV, US, #STATE WIDE, OR, US, #STATE WIDE, CA, US, #STATE WIDE, GA, US, #STATE WIDE, MA, US, #STATE WIDE, LA, US, #STATE WIDE, NJ, US, #STATE WIDE, UT, US, #STATE WIDE, AR, US, #STATE WIDE, MD, US, #STATE WIDE, IA, US, #STATE WIDE, VA, US, #STATE WIDE, TX, US, #STATE WIDE, AZ, US, #STATE WIDE, MI, US, #STATE WIDE, MO, US, #STATE WIDE, KS, US, #STATE WIDE, PA, US, #STATE WIDE, NE, US, #STATE WIDE, CT, US, #STATE WIDE, SD, US, #STATEWIDE, VT, US, #STATE WIDE, MN, US, #STATE WIDE, NH, US, #STATE WIDE, IL, US, #STATE WIDE, CO, US, #STATE WIDE, NY, US, #STATE WIDE, ME, US, #STATE WIDE, WI, US, #STATE WIDE, OH, US, #STATE WIDE, FL, US, #STATE WIDE, RI, US, #STATE WIDE, SC, US, #STATE WIDE, KY, US, #STATE WIDE, OK, US, #STATE WIDE, IN, US, #STATE WIDE, WA, US, # Category: Manufacturing Date: Nov 20, 2025 If you are not finding suitable opportunities, please click below to join our talent community!

**Role:** As a Principal Staff Artificial Intelligence Engineer within the Simulation and Testing organization, you will play a critical role in leading the strategy and execution of simulation-based validation efforts for autonomous vehicle development. Your expertise will guide a team of engineers in defining best practices and driving innovation in testing and verifying the safety and performance of autonomous systems in complex simulated environments. You will be responsible for shaping the future of our simulation capabilities and ensuring robust validation methods are implemented effectively. **About the Organization:** The Simulation and Testing team is dedicated to advancing the development of autonomous vehicles through cutting-edge simulation technologies. We focus on creating realistic and challenging test scenarios that enable comprehensive evaluation of autonomous systems. Our collaborative environment fosters innovation and excellence, allowing us to push the boundaries of what is possible in autonomous vehicle testing. **What You'll Do:** + Lead the design, development, and implementation of simulation-based validation strategies for autonomous systems, ensuring safety and performance metrics are met. + Guide and mentor a team of engineers, fostering a culture of innovation and excellence in simulation methodologies. + Define and implement robust validation methods and sophisticated evaluation strategies within simulation frameworks, including the creation of challenging test scenarios and analysis of results at scale. + Collaborate cross-functionally with teams involved in autonomous system development to ensure seamless integration of simulation testing into the overall development process. + Influence technical roadmaps and strategic priorities, aligning simulation efforts with company objectives and product milestones. **Your Skills & Abilities (Required Qualifications):** + Master's in Robotics, Computer Science, Engineering, or a related technical field. + 10 years of extensive experience in simulation and testing, preferably within the autonomous vehicle domain. + Proven track record in developing or testing large-scale Machine Learning (ML) systems, with a strong understanding of simulation platforms and methodologies. + Direct experience leveraging LLMs/VLMs/etc. for production workflows. + Experience with the entire machine learning lifecycle from data generation and curation through model training through model deployment. + Hands-on expertise in implementing robust validation methods and evaluation strategies, including defining relevant metrics and correlating simulation performance with real-world behavior. + Strong software engineering skills, particularly in programming languages relevant to simulation and testing. + Excellent communication, collaboration, and mentoring abilities, with a passion for driving innovation in autonomous technology. **What Can Give You a Competitive Edge (Preferred Qualifications):** + Ph.D. in Robotics, Computer Science, Engineering, or a related technical field. + 15 years of extensive experience in simulation and testing, preferably within the autonomous vehicle domain. **Compensation** **:** The compensation information is a good faith estimate only. It is based on what a successful applicant might be paid in accordance with applicable state laws. The compensation may not be representative for positions located outside of the California Bay Area. + The salary range for this role is $193,000 - $296,600. The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position. + Bonus Potential: An incentive pay program offers payouts based on company performance, job level, and individual performance. **Benefits:** GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. **Company Vehicle:** Upon successful completion of a motor vehicle report review, you will be eligible to participate in a company vehicle evaluation program, through which you will be assigned a General Motors vehicle to drive and evaluate. Note: program participants are required to purchase/lease a qualifying GM vehicle every four years unless one of a limited number of exceptions applies." **Remote:** This role is based remotely but if you live within a 50-mile radius of [Atlanta, Austin, Detroit, Warren, Milford or Mountain View], you are expected to report to that location three times a week, at minimum. **This job may be eligible for relocation benefits.** \#LI-DO1 **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards Resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Quanex is looking for a Manufacturing Engineer to join our team in Jackson, GA. The Manufacturing Engineer will be responsible for controlling multiple project activities in the areas of product/process design, product/process modifications, manufacturability studies, plant usage, plant layouts, capital investments and engineering documentation. We Offer You! * Competitive Salary * Bonus Potential * 401K with 5% company match, yours to keep after 2 years * 15% immediate return if you participate in the company's ESPP * Medical, Dental & Vision Plans * Employer paid disability plans and life insurance * Paid Time Off & Holidays * Various Work Schedules * Tuition support for degree and continuous education * Employee Resource Groups focused on employee empowerment What's attractive about the Manufacturing Engineer position? * Opportunity to work with a great team * Supportive & collaborative culture * The Company LIVES its values What Success Looks Like: * Prepares R.F.E.'s for projects to implement new tools and equipment. The expectations for these projects can be large in nature and may be complex; they will have long-term impacts on the operation of our business and provide gains in profitability. * Leads the design estimation process, which includes determining the feasibility of design, estimates design times requirements, assembly, testing, and project costs. * Determines and calculates financial justification for projects through labor savings, efficiency gains, scrap reduction, safety hazard elimination, etc. Financial analysis to include IRR and payback period. * Responsible for the development of documentation necessary for manufacturability. This includes but is not limited to Bills of materials, Product Flow Charts, Part Drawings, Assembly Drawings, Schematic (Air, Lube, and Hydraulics) Piping Drawings and Orientation Drawings. * Communicates design intent to electrical engineering, ensuring electrical requirements are included in the design, and the product operates in the most efficient manner, without unnecessary complexity. * Manage total project activities with a plan for timely completion. The individual will be heavily involved in implementation teams and projects that have an impact to the overall success of the organization. * Provide technical assistance to all company departments, as well as other divisions and customer(s). What You Bring: * Bachelor of Science Degree in Engineering discipline or equivalent experience to prove capabilities. * Minimum of two years' experience as a product/design/mechanical/manufacturing engineer or related engineering field. * Proficient in project management and communication skills. * Excellent time management skills with a proven ability to meet deadlines. * Strong analytical and problem-solving skills with the ability to assess problems or issues with manufacturing equipment. * Fluent in SolidWorks and other applicable engineering programs. * Proficient with Microsoft Office Suite or related software. The salary range for this position is $81,000 to $110,000 per year w/ bonus potential. About Quanex, A Part of Something Bigger Quanex (NYSE: NX) is a global, publicly traded manufacturing company primarily serving OEMs in the fenestration, cabinetry, solar, refrigeration and outdoor products markets. We are A Part of Something Bigger by improving the performance and aesthetics of end products through continuous innovation, helping customers achieve greater production efficiencies, dedication to giving back to communities where we operate, producing shareholder value and helping our employees learn, grow, and thrive. Learn more at Quanex.com.

Job Description Ergon Asphalt & Emulsions, Inc. is seeking a full-time Engineering Manager, Projects at our Flowood, MS location. This role will lead a team of project managers and project engineers responsible for executing capital projects for the Pavement & Coating Resources (PCR) business segment within Ergon. This role provides leadership, training, and mentorship to project engineers in areas such as scope development, cost estimating, project scheduling, and relationship building with Operations, Vendors, and Contractors. This position plays a critical role in delivering safe, efficient, and cost-effective capital projects that support Ergon's long-term growth and operational excellence. About Ergon Family owned and operated, Ergon got its start more than six decades ago in the petroleum industry's service sector. This company has grown into a well-diversified organization over the years, with 4,000+ employees around the world engaged in a number of industries related to the refining and marketing of specialty oils, asphalt, thermoplastic resins, petrochemicals, propane, and the necessary infrastructure to support those businesses. Commitment to service is at the core of Ergon's mission and values. A focus on hard work, reliable supply and quality products have contributed to the company's steady growth over the years. About the Role The Engineering Manager- Projects will guide, direct, and mentor his/her direct reports related to all of their projects at each of their facilities. Regular responsibilities include systems design, cost estimating, project justification, contractor review, scheduling, and construction management. The Engineering Manager- Projects will conduct site visits with the project engineers on his/her team. This position will champion continuous improvement initiatives, including systems and procedure enhancements, that ensure knowledge transfer and consistency within the group. Key Duties • Manage a team of project engineers including recruiting, on-boarding, training, and mentoring. • Manage key relationships within the Operations Management Team to help drive success of the Projects Team. • Review and approve scope of works, project designs, and AFE's for projects being executed by members of the Projects Team. • Drive reporting structure and KPI efforts of the Projects Team. Ensure projects are progressing in a timely manner. • Serve as project manager with responsibilities including scope development, detailed design, budget development, contractor selection, schedule management, and project execution oversight in special circumstances. • Review and approve purchase requisitions to vendors/contractors written by your team members. • Ensure compliance with environmental, health, and safety laws related to projects. Soft Skills • Excellent verbal and written communication skills • Excellent customer service- builds relationships within and outside of the department effectively • Champions customer needs- responds pro-actively to customer requests • Excellent planning and organizational skills • Motivated and shows initiative to solve issues • Passionate about employee development and mentoring Key Competencies • Leadership • Decision-making and Problem-solving • Planning/Organizing • Communication Education and Qualifications • Technical Bachelor's Degree required; Mechanical or Civil Engineering preferred. • Minimum of 5 years of experience as a project engineer/manager preferred. • Strong written, verbal, analytical, and interpersonal skills required. At Ergon, we are a relationship-driven, family-owned company that values each employee's growth and contributions. Headquartered in Flowood, Mississippi, we take pride in maintaining a close-knit, small-company atmosphere while offering exceptional career opportunities. Our comprehensive benefits package includes: Competitive pay 401(k) matching & profit sharing Health, Dental, Vision, and Life Insurance Short- and Long-Term Disability Plans Additional voluntary benefits Paid holidays, vacation, and sick leave Tuition assistance At Ergon we live by our core values: Empowered Service: Together, we're committed to delivering unparalleled service. We do what's right, provide solutions, and foster stronger relationships with our teams and customers. Employee safety is our top priority and the first consideration in all aspects of our service. That's empowered service. Selfless Leadership: We lead with compassion and put those around us before ourselves. We don't say we're experts; we demonstrate it through technical expertise, category innovation, and care for what we do. We call this selfless leadership. Purposeful Growth: We believe employee and company growth go hand in hand. We build our legacy together to ensure future success through purposeful growth. The company has continually reinvested tremendously back into the business, not just growing for the sake of growing but growing carefully and strategically. Respectful Relationships: Together, we foster a culture of respect, acceptance, and diversity of ideas and people. Our differences make us stronger. We're united by our shared values, constantly forging respectful relationships. Come and join the Ergon team! We are an EEO/AAP employer. Job Role: Engineering Manager, Projects Location: Flowood, MS Employment offer contingent upon pre-employment drug test, background check, and MVR. Job Posted by ApplicantPro

Job Description Project Engineer Employment Type: Full Time, Salaried Exempt Experience Level: Entry to Mid-Level, zero to three years A growing Atlanta based construction firm is seeking a motivated Project Engineer who wants to build a long-term career in commercial construction. This role is ideal for someone who wants hands on learning, exposure to both field and office operations, and a clear path toward becoming an Assistant Project Manager and eventually a Project Manager. Project Engineer is the operational support hub for the project team. You will manage documentation, coordinate with the design team, support procurement, assist with financial tasks, and maintain regular job site engagement. This is a learning centered role with direct mentorship from experienced Project Managers and Superintendents. Key Responsibilities Document Control and Information Management • Manage submittals, review shop drawings for compliance, and coordinate approvals with the design team • Draft and process RFIs and track responses to support field operations • Prepare agendas and detailed meeting minutes for OAC and internal meetings Project Management and Procurement Support • Assist with subcontractor buyout, scope review, material procurement • Track lead times and delivery schedules to maintain project flow • Support monthly pay applications, invoice coding, change order pricing, and other financial tasks • Lead the project closeout process by collecting warranties, manuals, and as built documents Field Support and Quality Control • Walk the job site regularly with the Superintendent to understand sequencing and verify progress • Document safety observations and support quality control checks • Manage the punch list process and coordinate subcontractors to complete final items • Maintain organized photo documentation using Procore or similar software Qualifications • Bachelor's degree in Construction Management, Civil Engineering, Architecture, or related field • Zero to three years of commercial construction experience such as internships, co-ops, or entry level roles • Proficiency with Microsoft Excel, Microsoft Project, and Bluebeam Revu • Familiarity with Procore or similar construction management software is a plus • Strong written communication skills and attention to detail • Eagerness to learn, willingness to ask questions, and a proactive mindset Work Environment and Physical Requirements • Hybrid work setting that includes office work and active job site presence • Ability to walk job sites, climb temporary stairs, and wear PPE • Ability to occasionally lift up to twenty pounds Compensation and Benefits Competitive salary, performance bonuses, medical, dental, vision, 401K, and a clear professional growth pathway. You will receive hands on mentorship and opportunities to advance quickly within the organization.

About the Company RNGD (a Palmisano Company) is a rapidly scaling organization emerging as a nationally recognized leader in construction through our unique Renegade mindset focused on innovation, creativity, and culture. The team is made up of a highly engaged group of seasoned professionals and emerging leaders. We are creators who believe that what we build drives the growth of our cities and that to fulfill our mission, we must constantly challenge the old way of doing things. Headquartered in New Orleans, Louisiana, we thrive on building communities, building teams, building leaders, and growing business throughout the Southeast region with additional teams currently in Nashville and Huntsville. About the Role The Project Engineer provides administrative and technical services in the fields of scheduling, cost engineering, subcontract coordination, and general project administration. Along with job site Project Managers and Superintendents, Project Engineers have responsibilities in overall project oversight and may be assigned to a particular section, subcontractor, or other facet(s) of the project. Primary Responsibilities Assist in development of project plan as requested. Collaborate with the Project Manager(s) in purchasing activities including scoping and take-offs. Prepare and forward submittals. Confirm submittal complies with plans/specs. Support the development and updating of the project schedule and subcontractor detail schedules. Monitor and expedite material deliveries ensuring all deliveries conform with the project schedule. Administer subcontracts as assigned. Assist the Project Manager and Superintendent in the coordination of drawings. Draft change orders. Solicit prices from subcontractors and suppliers. Perform scope take-off and estimate costs. Aid in close out of project, including assembling manuals and other warranties for turnover to owner and preparation final payment documents for subcontractors. Participate/lead training sessions. Act as the point person for document management applications. Qualifications Undergraduate or graduate degree in Engineering, Architecture, Construction Management, or related discipline. 3-5 years of experience in a Project Engineer, or similar, role in the construction industry (experience with a civil contractor preferred). Demonstrated knowledge of scheduling, cost engineering, subcontract coordination, and general project administration. Familiarity reading drawings and specifications. Knowledge of Primavera preferred. Computer proficient, including Microsoft Office products. Exceptional written and verbal communication skills. Team player and reliable. Interest and passion for building and the industry. Detail oriented with ability to manage multiple priorities and meet deadline. RNGD is an equal employment opportunity employer.

Job Description Ergon Refining in Vicksburg currently has an opening for a Maintenance/Project Engineer. This position monitors and coordinates daily maintenance activities, provides technical/ engineering support to maintenance groups as needed, striving to continually identify and implement means of predicting and preventing equipment failures. We are a great company with great pay and great benefits. Ergon Refining, Inc. is a relationship-driven company that values each employee's willingness to learn and contribute to the team. We are family owned with locations in Flowood and Vicksburg, MS; we pride ourselves on maintaining a small company feel. Maintenance / Project Engineer Responsibilities Keep safe work habits as the highest priority at all times Maintain a clean and well-organized workspace at all times Strive to develop good working relationships with all co-workers, customers and associates Exemplify high levels of moral and ethical standards and values Monitor the initiation, development, assignment and completion of general maintenance work orders and strive to identify areas in which improvement can be made to decrease failure and increase the efficiency of repairs. Provide technical / engineering support on a continual basis to the Mechanical Maintenance and IEC Maintenance Departments to coordinate work that involves multiple departments and to ensure that all maintenance-related tasks are completed in a professional and timely manner. Coordinate and / or schedule non-routine maintenance work including maintenance and emergency shutdowns. Maintain updated files for all plant equipment containing summaries of major repairs, purchasing documentation showing parts, etc. ordered and associated costs, and any other documentation related to the equipment that may be needed. Maintain and develop a computerized preventive maintenance system to periodically provide maintenance to plant equipment as needed to reduce equipment failures. Coordinate Plant Turnarounds Participate in all aspects of miscellaneous project and maintenance engineering as necessary to meet the needs of the Maintenance / Engineering Department. Maintenance / Project Engineer Qualifications Bachelor's degree, preferably in Civil or Mechanical Engineering, is required. One (1) to two (2) years of experience in a petrochemical and / or manufacturing environment is preferred The person selected must be self-motivated with strong leadership, communication, and organizational skills and successfully complete and pass a Functional Job Capacity Evaluation (FCE). Must be able to pass a pre-employment drug screen and background check. A clean MVR is required. Ergon offers a competitive benefits package: 401(k) matching, Health, Life, Dental, Holidays, Vacation, Sick Leave, Tuition Assistance and Profit Sharing We are an EEO/AAP employer. Job Role: Maintenance / Project Engineer Location: Vicksburg, MS Job Posted by ApplicantPro

**Power your future with Qualus as** a Senior Project Engineer. The Senior Project Engineer is responsible for performing electrical engineering and related activities associated with Qualus projects. Although a significant portion of expected projects are in power transmission and delivery (substations), other project related activities could include work scopes in power generation and industrial facilities. The Project Engineer will be required to perform and oversee the work designers, engineer interns and/or lead small technical teams. He/she will also be required to manage the scope, schedule, and budget for assigned projects. This position does require occasional travel and overnight stays. **Responsibilities** + Performs and/or leads the project team to create all design documents and drawings for a project including electrical system drawings (single line diagrams, three-line diagrams, wiring diagrams, interconnects, etc...) and electrical physical drawings (general arrangement and elevations, ground grid plan and details, conduit plan and details, lighting plan and lightning protection plan, etc...). + Performs and/or leads the project team to perform and develop electrical system studies such as load flow, short circuit, arc flash hazard, protective device coordination, harmonics, and ground grid analysis using industry standard software. Applicable software: SKM PowerTools, ETAP, EasyPower, CEGS, and CYME. + Manages Qualus projects both technically and administratively. Working within the project team to develop project deliverables to meet customer and internal schedules within budgeted manhours and costs associated with subcontract engineering, labor, and material. Lead procurement and site construction efforts on Qualus's engineer-procure and engineer-procure-construct projects in part by (1) directing and supporting Qualus internal resources for procurement and expediting and (2) managing the site construction manager who may be an internal or subcontract resource or part of the contractor labor team. + Provides technical support in the development of Qualus proposals which includes application engineering, writing of equipment performance specifications, estimating, conceptual and detailed design/ drawing development/ calculations, support to solicit equipment and material and labor proposals, and review of equipment and labor quotations. + Manages active Qualus clients which includes both technical support and promoting extended and new services. During project activities, be attuned to the possibility of other work with the client. Be prepared and engage in discussions on what Qualus Engineering does and can offer to the client. + Make site visits for construction observation on current projects underway and to investigate prospective project opportunities. + On a time-limited basis, manage site construction, observe and lead testing and maintenance, oversee repairs of electrical equipment, and perform forensic investigations, depending on experience level. + Participate in ongoing technical training through work assignments and strategically selected 3 rd party classes. + Performance of other technical and marketing duties as assigned. + Take personal responsibility for the quality and accuracy of his/her work + Bring potential project-related problems and possible solutions to the attention of the responsible party + Participates in quality assurance and quality control programs. + Other duties as required. **Qualifications** + Bachelor's Degree in an Engineering Discipline (Electrical is preferred) from a US accredited college or university. + Minimum of four (6) years relevant experience with electrical power systems. + Experience in writing proposals. + Professional Engineering License with the ability to be licensed in additional states (or ability to obtain professional engineering license within six (6) months of date of hire) + Working knowledge of electrical power systems and protective relaying + Knowledge of Microsoft office products including Word, Excel and Outlook + Ability to communicate effectively with co-workers, vendors, clients, etc... + Ability to work well with others in a team environment **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-MS_ **ID** _2024-2193_ **Category** _Engineering & Advisory_ **Position Type** _Regular Full Time_ **Remote:** _Yes_

Provide effective technical expertise for mechanical systems by designing, managing, and implementing equipment solutions based on the department's business plan requirements to ensure company sustainability. Responsibilities + Develop, manage, and implement the established E-Flow for investment projects to accomplish business plan targets. + Complete equipment improvement activities and decision-making processes to enhance characteristics that empower every associate to succeed. + Adhere to equipment installation standards to effectively improve MTBF (mean time between failures) and MTTR (mean time to repair). + Drive, support, and develop engineering solutions to solve complex problems to achieve department targets. + Support the introduction of new technologies and provide associated technical training to drive continuous process improvements. + Utilize data analysis and customer feedback to identify potential problems and implement countermeasures to reduce impact on safety, quality, cost, delivery, morale, and environmental aspects. + Develop and maintain technical documentation/procedures to meet design intent for long-term production sustainability. + Develop the capability of self, colleagues, and team through training and sharing experiences to ensure growth in the team's technical skill set. + Share engineering technical knowledge and change points through verbal and written communication with internal and external customers to strengthen department and plant characteristics. + Identify gaps related to equipment to develop, lead, and/or actively participate in the execution of activities to improve safety, quality, cost, delivery, morale, and environmental aspects. Essential Skills + Engineering experience, particularly in equipment and mechanical engineering. + Proficiency with FMEA, MS Office Suite, project management, equipment installation, root cause analysis, layout design, project scheduling, vendor management, design, and troubleshooting. + Bachelor's degree in Mechanical, Electrical, or Applied Manufacturing Engineering or equivalent work experience. + 2-6 years of engineering experience. + Experience with Catia 3D Design or equivalent 3D design software. + Proficiency in Microsoft Office (Excel, Word, PowerPoint). Additional Skills & Qualifications + Ability to create technical presentations. + Ability to teach others. + Strong communication and presentation skills. Job Type & Location This is a Contract position based out of Jackson, MS. Pay and Benefits The pay range for this position is $40.00 - $48.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jackson,MS. Application Deadline This position is anticipated to close on Dec 11, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

**Requisition ID:** 177550 **Job Level:** Entry Level **Home District/Group:** TIC Power District **Department:** Field Operations **Market:** Power Employment Type: Full Time As a **Field Engineer,** you bring your big ideas, commitment to top quality and unwavering work ethic. In return, we offer huge career and travel opportunities and the satisfaction of building "the next big thing" from the ground up. There's a reason Kiewit attracts the best: we offer fast-paced excitement and fulfillment you won't find anywhere else. Our mission is to make a difference and we offer opportunities for you to make make a difference in our construction operations. Whether we're boring tunnels through mountains, turning rivers into energy or building bridges that connect communities, we depend on our passionate, skilled, and safety-obsessed construction professionals to get it done right. **District Overview** **TIC Power (TICP)** provides direct-hire construction services for Power Generation utilizing a non-union craft force. TIC Power builds major EPC and bid-build natural gas power plants, solar fields and energy storage systems throughout North America. All of Kiewit Power is committed to Kiewit's "Nobody Gets Hurt" Philosophy. **Location** Although headquartered in Kansas City, our TIC Power district have projects that span across the entire US. Our projects may be built in large cities, small towns, or very remote locations, so our people must be willing to go where the work is. Job assignment location will be determined closer to your start date. Field engineers may do rotations between the field and office work. Candidate must be open to traveling and relocating as business requires. **Responsibilities** + Work with a vibrant and diverse team to build, estimate, and schedule mechanical, electrical and heavy industrial construction. + Support both administrative and construction activities as assigned by supervisor; review proposals, specifications and drawings, perform material takeoffs, prepare cost estimates and attend pre-bid investigation meetings. + Learn to supervise subcontractors and communicate with vendors. + Prepare work plans, assure quality control, manage and track costs and materials, schedule equipment, administer safety programs and maintain exceptional owner relations. + Relocate as required. **Qualifications** + Bachelor's degree in Construction Management, Electrical, Mechanical or Civil Engineering + Knowledge of construction safety and current federal & OSHA requirements + Broad knowledge and ability to understand project scheduling and cost control as well as to read and understand project owner specifications and engineering drawings + Working knowledge and experience with Microsoft Office + Familiarity with SureTrak, Hard Dollar, Revit, SAP, Pro Log and/or Primavera "P6" is a plus + Strong organizational and time management skills + Strong written and verbal communications skills; strong attention to detail with the ability to recognize discrepancies + Strong work ethic - highly motivated and willing to do what it takes to get the job done right + Ability to work independently as well as part of a team + Ability to freely access all points of a construction site in wide-ranging climates and environment + Ability to travel and/or relocate as required + Reliable transportation to and from work \#LI-KK Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC

Arizona - Remote; Arkansas - Remote; Fayetteville, AR; Florida - Remote; Fort Worth, TX; Georgia - Remote; Idaho - Remote; Illinois - Remote; Indiana - Remote; Iowa - Remote; Kansas - Remote; Kentucky - Remote; Louisiana - Remote; Michigan - Remote; Minnesota - Remote; Mississippi - Remote; Missouri - Remote; Montana - Remote; Nebraska - Remote; Nevada - Remote; New Mexico - Remote; North Carolina - Remote; North Dakota - Remote; North Kansas City, MO; Ohio - Remote; Oklahoma - Remote; Omaha, NE; Pennsylvania - Remote; South Carolina - Remote; South Dakota - Remote; Tennessee - Remote; Texas - Remote; Utah - Remote; Virginia - Remote; West Virginia - Remote; Wisconsin - Remote; Wyoming - Remote **Company Description** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** Olsson is seeking an Electrical Instrumentation Engineer for our Data Center Facilities Engineering Design team to help support the design development of the instrumentation and control systems associated with electrical distribution systems. The Electrical Instrumentation Engineer will provide technical leadership and expertise with respect to system modernization and maintenance, will create plans, schematics, and one-lines, and will lead and support small and large instrumentation and controls projects with a focus on reliability and technical execution. **Primary Responsibilities** + Support instrumentation-related threat mitigation action plans and incident management investigations and actions + Ensure the smooth real-time operation of the instrumentation system by performing and analyzing technical studies and data, developing strategies and alternatives, and establishing and documenting operating procedures + Works within a multi-discipline team to develop efficient and reliable electrical design packages for low and medium voltage electrical infrastructure + Lead the Instrumentation and Control design for projects and define control scheme in alignment with industry and client standards to satisfy power system reliability requirements + Review data sheets, control block diagrams, and functional/ operational descriptions for all instrumentation related projects + Provide technical leadership and serves as a subject matter expert, delivering professional and technical guidance on programs, projects and initiatives. + Mentor and support team members, offering guidance and encouraging initiative while helping them develop as engineers and technical leaders. **Required Qualifications** + Bachelor's degree in Electrical Engineering, or Instrumentation and Control Engineering + **7+ years' experience** in instrumentation and control systems **within the industrial electrical and/or hyperscale data center sector** + Expertise in the design, application, and implementation of distribution and generation instrumentation and control systems for building level infrastructures + Ability to demonstrate a thorough understanding of the industry standards that governs the selection, testing and performance of instrumentation sensors and control schemes + Ability to demonstrate a thorough understanding of global standards such as ISA, IEC, IEEE and other related to instrumentation and control systems + **Experience working with DCS, SIS and PLC** s and developing, reading and understanding P&IDs and control schematics **Preferred Qualifications:** + License Professional Engineer (P.E.) \#LI-DD1 #Remote **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Ergon Asphalt & Emulsions, Inc. is seeking a full-time Engineering Manager, Projects at our Flowood, MS location. This role will lead a team of project managers and project engineers responsible for executing capital projects for the Pavement & Coating Resources (PCR) business segment within Ergon. This role provides leadership, training, and mentorship to project engineers in areas such as scope development, cost estimating, project scheduling, and relationship building with Operations, Vendors, and Contractors. This position plays a critical role in delivering safe, efficient, and cost-effective capital projects that support Ergon's long-term growth and operational excellence. About Ergon Family owned and operated, Ergon got its start more than six decades ago in the petroleum industry's service sector. This company has grown into a well-diversified organization over the years, with 4,000+ employees around the world engaged in a number of industries related to the refining and marketing of specialty oils, asphalt, thermoplastic resins, petrochemicals, propane, and the necessary infrastructure to support those businesses. Commitment to service is at the core of Ergon's mission and values. A focus on hard work, reliable supply and quality products have contributed to the company's steady growth over the years. About the Role The Engineering Manager- Projects will guide, direct, and mentor his/her direct reports related to all of their projects at each of their facilities. Regular responsibilities include systems design, cost estimating, project justification, contractor review, scheduling, and construction management. The Engineering Manager- Projects will conduct site visits with the project engineers on his/her team. This position will champion continuous improvement initiatives, including systems and procedure enhancements, that ensure knowledge transfer and consistency within the group. Key Duties * Manage a team of project engineers including recruiting, on-boarding, training, and mentoring. * Manage key relationships within the Operations Management Team to help drive success of the Projects Team. * Review and approve scope of works, project designs, and AFE's for projects being executed by members of the Projects Team. * Drive reporting structure and KPI efforts of the Projects Team. Ensure projects are progressing in a timely manner. * Serve as project manager with responsibilities including scope development, detailed design, budget development, contractor selection, schedule management, and project execution oversight in special circumstances. * Review and approve purchase requisitions to vendors/contractors written by your team members. * Ensure compliance with environmental, health, and safety laws related to projects. Soft Skills * Excellent verbal and written communication skills * Excellent customer service- builds relationships within and outside of the department effectively * Champions customer needs- responds pro-actively to customer requests * Excellent planning and organizational skills * Motivated and shows initiative to solve issues * Passionate about employee development and mentoring Key Competencies * Leadership * Decision-making and Problem-solving * Planning/Organizing * Communication Education and Qualifications * Technical Bachelor's Degree required; Mechanical or Civil Engineering preferred. * Minimum of 5 years of experience as a project engineer/manager preferred. * Strong written, verbal, analytical, and interpersonal skills required. At Ergon, we are a relationship-driven, family-owned company that values each employee's growth and contributions. Headquartered in Flowood, Mississippi, we take pride in maintaining a close-knit, small-company atmosphere while offering exceptional career opportunities. Our comprehensive benefits package includes: * Competitive pay * 401(k) matching & profit sharing * Health, Dental, Vision, and Life Insurance * Short- and Long-Term Disability Plans * Additional voluntary benefits * Paid holidays, vacation, and sick leave * Tuition assistance At Ergon we live by our core values: * Empowered Service: Together, we're committed to delivering unparalleled service. We do what's right, provide solutions, and foster stronger relationships with our teams and customers. Employee safety is our top priority and the first consideration in all aspects of our service. That's empowered service. * Selfless Leadership: We lead with compassion and put those around us before ourselves. We don't say we're experts; we demonstrate it through technical expertise, category innovation, and care for what we do. We call this selfless leadership. * Purposeful Growth: We believe employee and company growth go hand in hand. We build our legacy together to ensure future success through purposeful growth. The company has continually reinvested tremendously back into the business, not just growing for the sake of growing but growing carefully and strategically. * Respectful Relationships: Together, we foster a culture of respect, acceptance, and diversity of ideas and people. Our differences make us stronger. We're united by our shared values, constantly forging respectful relationships. Come and join the Ergon team! We are an EEO/AAP employer. Job Role: Engineering Manager, Projects Location: Flowood, MS Employment offer contingent upon pre-employment drug test, background check, and MVR.

SOL Engineering Services, LLC is an engineering and technical services provider with over 20 years of engineering and consulting experience. Our viability comes, in part, from utilizing the diverse backgrounds of the firm's owners and the experiences of its team of approximately 100 engineers, scientists, technical subject matter experts, and program and project managers. Our hands-on project implementation approach encompasses management, quality, and engineering principles to ensure effective management and delivery of all projects. SOL's reputation and keys to success are built on providing high-quality, responsive engineering and related technical services while maintaining professional commitments and ensuring that full satisfaction is given to our clients throughout the United States. We are currently seeking a professional civil engineer to join our growing company. This candidate will work closely with other engineers and technicians to assist in the design and management of several civil engineering projects simultaneously. Job Responsibilities Performs various engineering and design assignments requiring the application of basic principles and fundamental theories studied in a four-year university engineering program, and available data in the engineering field. Provides support for other engineering activities as required. Ability to effectively communicate, both verbally and in writing. Proven ability to multi-task, appropriately prioritize workflow and complete tasks. Service-oriented, self-starter, and team player. Demonstrated ability to solve complex engineering problems. Excellent time management skills. Working knowledge of AutoCAD, capable of taking data from field team to creating drawings. Compiling information for plans, as-builts and final plats. Assisting in preparing preliminary information and specifications for plans. Prepare engineering-related calculations, develop drawings, plans, specifications, and visual aids. Assisting in developing a variety of engineering layouts, drawings and designs. Assisting in working with local, state, and federal agencies to obtain technical requirements, permits and approvals for projects. Exercise judgment limited to developing details of work in making preliminary selections and adaptations of engineering alternatives. Successfully complete assignments designed to further develop technical skills and knowledge, understanding, decision-making, and ethical judgment in accordance with accepted principles and practices for Professional Engineers. Performs a wide variety of civil engineering duties under the supervision of a registered professional engineer, project manager, or senior-level team member. Responsible for the development of engineering computations, plans, specifications, material quantity take-offs, estimates, site investigations and designs. Perform due diligence supporting site selection and site planning activities which will include, but is not limited to preliminary local zoning, drainage, soils, traffic flow, utilities, and environmental evaluations and studies. Assist in site plan design, including conceptual drainage, cut and fill, grading, and preparation of Low Impact Development (LID) plans. Complete hydraulic calculations and analysis and prepare reports in formats acceptable to the jurisdictional authorities. Design using analysis software and AutoCAD, Civil 3D and HydroCAD. Completion of engineering calculations and design using AutoCAD Civil 3D. Support the creation and assembly of complete sets of site construction documents (i.e. plans, specifications, project schedules, project safety plans, project materials quantity requirements, and cost estimates). Stay up to date and current on all changes in civil engineering related design codes and industry standards both at state and national levels. Administer contracts, monitor the quality and contract compliance of activities of vendors and subconsultants (Water chemical analysis, Materials testing, Geotech, Surveying, etc.) Read and evaluate the following: Land Surveys and GIS Mapping, Geotechnical Engineering reports, Water quality analysis reports, Wetland delineation reports, Traffic studies, Phase I, II and III Environmental Assessment reports, Subsurface utility location surveys, Noise and sound studies, Wildlife/ critical habitat/ archeological/ historic/ and cultural resource reports. Help define and prepare Site Design Concept documents for projects. Perform site and facility physical condition assessments. Performs other responsibilities associated with this position as may be appropriate. Job Qualifications Bachelor's degree in civil engineering from an ABET accredited school (a master's degree in civil engineering is a plus. Recently registered as a civil engineer to 6 Years of engineering experience. Professional Engineer registration OR successfully obtain registration through comity within one year from date of application submittal to SOL. Ability to effectively communicate in writing and verbally with internal and external partners, including clients, subcontractors, and utility companies. Excellent time and project management skills. Very organized, dependable, and professional. Previous internship experience with an engineering design firm is a plus. Experience with permitting at federal, state, regional, county, and local levels is a plus. Proficiency at producing construction documents using AutoCAD Civil 3D. We offer a competitive salary, health benefits and paid vacation. Veterans and HUBZone residents are encouraged to apply. SOL Engineering Services, Equal Opportunity Employer

_Remote: This role is based remotely but if you live within a 50-mile radius of Mountain View, you are expected to report to that location three times a week, at minimum._ **The Role: ** We are seeking an experienced Staff full stack engineer with a strong ability to execute hands-on technical work. The AI Lifecycle Team provides the UX backbone and visualization products that Machine Learning Engineers use to shepherd their ideas from data collection to model deployment in the AV. We enable MLEs at Cruise to Run and debug ML pipelines, Initiate data collection, Manage model training, Evaluate model performance, Deploy models to the AV. As a Staff Full Stack Engineer, you will collaborate closely with machine learning engineers, research scientists, and other partners to develop state-of-the-art AI solutions that enable the future of intelligent driving technologies across General Motors vehicles. **What** **You'll** **Do:** + Build UX experiences and agentic workflows to improve MLE workflows and productivity + Build backend integrations to provide unified experience across ML lifecycle + Raise the bar on system observability, debuggability, and operational excellence, and user experience. + Own and drive the design and architecture across the ecosystem that meets security and compliance standards + Establish consistent metrics to measure platform performance & health and create the roadmap for scale, reliability, low latency and speed of development and deployment + Partner with cross functional teams to understand requirements to design, architect and build framework of UX and backend integrations. Partner with engineering teams to ensure seamless end-to-end flow and data quality + Work across the project lifecycle: requirements, design, prototype, implementation, review, release, monitoring + Review and approve technical design documents and pull requests. Improve and enhance engineering systems documentation and development processes + Identify and pursue new paths of inquiry, innovation and challenge status quo + Develop and nurture technical talent within the team and recruiting **Your Skills & Abilities (Required Qualifications)** + At least 7+ years of experience building production-level frontend applications using React, Angular, WebGL or similar frameworks + Strong understanding of JavaScript/TypeScript and dynamic frontend fundamentals + Experience building, deploying, and operating high-availability services + Led large technical initiatives from idea to operationalization and continuous evolution of technical solution to enable new business capabilities and improve efficiencies + Ability to identify broad challenges (technical, functional, business challenges) worth tackling, and parse them into initiatives within and across engineering teams + Experience creating ground up enterprise architecture, systems architecture, integration architecture standards, frameworks, and practices + Programming experience in Python, Java, Go + Experience working with cloud infrastructure, automations, configuration management, artifact management and building advanced CI/CD solutions **Compensation:** The compensation information is a good faith estimate only. It is based on what a successful applicant might be paid in accordance with applicable state laws. The compensation may not be representative for positions located outside of New York, Colorado, California, or Washington. + The salary range for this role is $180,500 to $241,500. The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position. + Bonus Potential: An incentive pay program offers payouts based on company performance, job level, and individual performance. + Benefits: GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. **Benefits:** + Benefits: GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. **Relocation:** This job may be eligible for relocation benefits. **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Ergon Asphalt & Emulsions, Inc. is seeking a full-time Engineering Manager, Projects at our Flowood, MS location. This role will lead a team of project managers and project engineers responsible for executing capital projects for the Pavement & Coating Resources (PCR) business segment within Ergon. This role provides leadership, training, and mentorship to project engineers in areas such as scope development, cost estimating, project scheduling, and relationship building with Operations, Vendors, and Contractors. This position plays a critical role in delivering safe, efficient, and cost-effective capital projects that support Ergon's long-term growth and operational excellence. About Ergon Family owned and operated, Ergon got its start more than six decades ago in the petroleum industry's service sector. This company has grown into a well-diversified organization over the years, with 4,000+ employees around the world engaged in a number of industries related to the refining and marketing of specialty oils, asphalt, thermoplastic resins, petrochemicals, propane, and the necessary infrastructure to support those businesses. Commitment to service is at the core of Ergon's mission and values. A focus on hard work, reliable supply and quality products have contributed to the company's steady growth over the years. About the Role The Engineering Manager- Projects will guide, direct, and mentor his/her direct reports related to all of their projects at each of their facilities. Regular responsibilities include systems design, cost estimating, project justification, contractor review, scheduling, and construction management. The Engineering Manager- Projects will conduct site visits with the project engineers on his/her team. This position will champion continuous improvement initiatives, including systems and procedure enhancements, that ensure knowledge transfer and consistency within the group. Key Duties Manage a team of project engineers including recruiting, on-boarding, training, and mentoring. Manage key relationships within the Operations Management Team to help drive success of the Projects Team. Review and approve scope of works, project designs, and AFE's for projects being executed by members of the Projects Team. Drive reporting structure and KPI efforts of the Projects Team. Ensure projects are progressing in a timely manner. Serve as project manager with responsibilities including scope development, detailed design, budget development, contractor selection, schedule management, and project execution oversight in special circumstances. Review and approve purchase requisitions to vendors/contractors written by your team members. Ensure compliance with environmental, health, and safety laws related to projects. Soft Skills Excellent verbal and written communication skills Excellent customer service- builds relationships within and outside of the department effectively Champions customer needs- responds pro-actively to customer requests Excellent planning and organizational skills Motivated and shows initiative to solve issues Passionate about employee development and mentoring Key Competencies Leadership Decision-making and Problem-solving Planning/Organizing Communication Education and Qualifications Technical Bachelor's Degree required; Mechanical or Civil Engineering preferred. Minimum of 5 years of experience as a project engineer/manager preferred. Strong written, verbal, analytical, and interpersonal skills required. At Ergon, we are a relationship-driven, family-owned company that values each employee's growth and contributions. Headquartered in Flowood, Mississippi, we take pride in maintaining a close-knit, small-company atmosphere while offering exceptional career opportunities. Our comprehensive benefits package includes: Competitive pay 401(k) matching & profit sharing Health, Dental, Vision, and Life Insurance Short- and Long-Term Disability Plans Additional voluntary benefits Paid holidays, vacation, and sick leave Tuition assistance At Ergon we live by our core values: Empowered Service: Together, we're committed to delivering unparalleled service. We do what's right, provide solutions, and foster stronger relationships with our teams and customers. Employee safety is our top priority and the first consideration in all aspects of our service. That's empowered service. Selfless Leadership: We lead with compassion and put those around us before ourselves. We don't say we're experts; we demonstrate it through technical expertise, category innovation, and care for what we do. We call this selfless leadership. Purposeful Growth: We believe employee and company growth go hand in hand. We build our legacy together to ensure future success through purposeful growth. The company has continually reinvested tremendously back into the business, not just growing for the sake of growing but growing carefully and strategically. Respectful Relationships: Together, we foster a culture of respect, acceptance, and diversity of ideas and people. Our differences make us stronger. We're united by our shared values, constantly forging respectful relationships. Come and join the Ergon team! We are an EEO/AAP employer. Job Role: Engineering Manager, Projects Location: Flowood, MS Employment offer contingent upon pre-employment drug test, background check, and MVR.

The Engineering Projects - Manager leads a multi-discipline engineering team responsible for delivering brownfield and select greenfield mid-capital projects across Ergon's refining facilities. This role manages a portfolio of unit revamps, reliability improvements, safety-critical upgrades, tankage, and utility projects ranging from $1-15MM. The supervisor owns project scope from concept through commissioning, drives PSM compliance, and ensures seamless integration with turnaround (TAR) and operations teams-all while developing engineering talent and advancing Ergon's culture of safety, service, and continuous improvement. Key Responsibilities Build and maintain a 12-18-month refinery project portfolio prioritized by safety, operability, margin uplift, and energy performance. Lead project governance: stage-gates, AFEs, basis-of-estimate development, risk/contingency planning, and benefits realization. Supervise multi-discipline engineering design, ensuring compliance with specifications, MOC requirements, and applicable industry codes and standards. Translate PHA/HAZOP/LOPA findings into engineered solutions; assure SIS lifecycle requirements and relief system adequacy. Manage cost, schedule, and change control; maintain monthly forecasts and defend estimates with quantity-based progress. Select, negotiate, and administer contracting strategies (EPC/CM, unit-rate, T&M, lump sum); steward vendor FAT/SAT activities. Coordinate procurement processes including RFQs, bid evaluations, ITPs, metallurgy reviews, and documentation requirements. Lead constructability reviews, tie-in planning, commissioning, and readiness activities to achieve safe and timely RFSU. Deliver complete turnover packages including redlines, data books, equipment files, and CMMS load sheets. Recruit, coach, and develop engineering talent; set performance expectations and model Ergon values in daily leadership. Build strong cross-functional relationships with Operations, Process Engineering, Inspection/RBI, HSE, Maintenance/Reliability, Finance, and vendor partners. Basic Qualifications B.S. degree in Mechanical, Chemical, or Electrical Engineering. 8-12 years of refinery project engineering experience, including 3+ years leading teams or workstreams executing $1-15MM projects. Demonstrated success delivering brownfield unit revamps and tie-ins in operating refinery environments. Strong working knowledge of PSM (29 CFR 1910.119), MOC/PSSR processes, PHAs/LOPAs, SIS lifecycle (ISA-84/IEC 61511), and relief systems (API 520/521). Proficiency with applicable codes and standards (e.g., ASME B31.3, ASME VIII-1, API 2000/2350/650, API 579, NFPA 30, NEC, ISA-84). Hands-on experience with constructability reviews, field execution planning, vendor surveillance, and commissioning. Competence with MS Project or Primavera, cost control tools, document control systems, P&IDs, 3D models, and engineering data sheets. Preferred Qualifications Professional Engineer (PE) license and/or PMP certification. Experience integrating projects into turnaround windows and supporting tie-in execution. Familiarity with RBI programs, decoke/energy efficiency initiatives, APC interfaces, or emissions/LDAR project scopes. Working knowledge of AutoCAD/Plant 3D, SmartPlant/Hexagon, AVEVA, or Power BI for portfolio reporting. Job Posted by ApplicantPro

The Engineering Projects - Manager leads a multi-discipline engineering team responsible for delivering brownfield and select greenfield mid-capital projects across Ergon's refining facilities. This role manages a portfolio of unit revamps, reliability improvements, safety-critical upgrades, tankage, and utility projects ranging from $1-15MM. The supervisor owns project scope from concept through commissioning, drives PSM compliance, and ensures seamless integration with turnaround (TAR) and operations teams-all while developing engineering talent and advancing Ergon's culture of safety, service, and continuous improvement. Key Responsibilities * Build and maintain a 12-18-month refinery project portfolio prioritized by safety, operability, margin uplift, and energy performance. * Lead project governance: stage-gates, AFEs, basis-of-estimate development, risk/contingency planning, and benefits realization. * Supervise multi-discipline engineering design, ensuring compliance with specifications, MOC requirements, and applicable industry codes and standards. * Translate PHA/HAZOP/LOPA findings into engineered solutions; assure SIS lifecycle requirements and relief system adequacy. * Manage cost, schedule, and change control; maintain monthly forecasts and defend estimates with quantity-based progress. * Select, negotiate, and administer contracting strategies (EPC/CM, unit-rate, T&M, lump sum); steward vendor FAT/SAT activities. * Coordinate procurement processes including RFQs, bid evaluations, ITPs, metallurgy reviews, and documentation requirements. * Lead constructability reviews, tie-in planning, commissioning, and readiness activities to achieve safe and timely RFSU. * Deliver complete turnover packages including redlines, data books, equipment files, and CMMS load sheets. * Recruit, coach, and develop engineering talent; set performance expectations and model Ergon values in daily leadership. * Build strong cross-functional relationships with Operations, Process Engineering, Inspection/RBI, HSE, Maintenance/Reliability, Finance, and vendor partners. Basic Qualifications * B.S. degree in Mechanical, Chemical, or Electrical Engineering. * 8-12 years of refinery project engineering experience, including 3+ years leading teams or workstreams executing $1-15MM projects. * Demonstrated success delivering brownfield unit revamps and tie-ins in operating refinery environments. * Strong working knowledge of PSM (29 CFR 1910.119), MOC/PSSR processes, PHAs/LOPAs, SIS lifecycle (ISA-84/IEC 61511), and relief systems (API 520/521). * Proficiency with applicable codes and standards (e.g., ASME B31.3, ASME VIII-1, API 2000/2350/650, API 579, NFPA 30, NEC, ISA-84). * Hands-on experience with constructability reviews, field execution planning, vendor surveillance, and commissioning. * Competence with MS Project or Primavera, cost control tools, document control systems, P&IDs, 3D models, and engineering data sheets. Preferred Qualifications * Professional Engineer (PE) license and/or PMP certification. * Experience integrating projects into turnaround windows and supporting tie-in execution. * Familiarity with RBI programs, decoke/energy efficiency initiatives, APC interfaces, or emissions/LDAR project scopes. * Working knowledge of AutoCAD/Plant 3D, SmartPlant/Hexagon, AVEVA, or Power BI for portfolio reporting.

SOL Engineering Services, LLC is an engineering and technical services provider with over 20 years of experience. The firm has approximately 100 professionals, including engineers, scientists, and project managers. Who utilize best practices in management, quality, and engineering principles to ensure project delivery. Our hands-on project implementation approach encompasses management, quality, and engineering principles to ensure effective management and delivery of all projects. SOL's reputation and keys to success are built on providing high-quality, responsive engineering and related technical services while maintaining professional commitments and ensuring that full satisfaction is given to our clients throughout the United States. SOL Engineering is seeking an experienced licensed Senior Civil Engineer to drive business growth and project success for local and regional clients. The role involves leading civil design projects, managing budgets, and business development activities. The ideal candidate is a “seller-doer” with experience in pursuing business opportunities while leading and supervising a multi-discipline team. Work Location: Jackson, MS (1 position), Memphis, TN (1 position), and Huntsville, AL (1 position) - Relocation Assistance may be provided SOL Engineering does not sponsor work visas at this time. Job Duties Leads and manages civil design projects and project delivery teams from concept through completion, ensuring that all projects are delivered on time and within budget. This includes the design, analysis, and production of state, municipal, private, and federal design projects. Serves as the Engineer of Record for assigned civil engineering projects. Develops and manages office and project-level budgets, including establishing and enforcing system requirements, responsibilities, and standards supporting SOL's financial success. Develops and executes Business Development initiatives and activities to identify and capture new business opportunities and clients while retaining existing clients and contracts for SOL. Technical execution and management of assigned programs and projects, including developing, championing, managing, and maintaining project management plans, quality requirements, procedures, and goals as required by both SOL and our clients. Develop, manage, and successfully execute comprehensive project management plans that include risk assessments and management plans, quality management (QA/QC) plans, change management plans, schedules, budgets, communication plans, and reporting for potential opportunities, projects, and business initiatives. Job Qualifications Bachelor's degree in civil engineering from an ABET-accredited school (a master's degree in civil engineering is a plus). 10+ Years of civil engineering experience. Current Professional Engineering registration in the State of Tennessee, Alabama, OR Mississippi with the ability to successfully obtain registration in multiple states within one year from the date of employment with SOL Engineering. Excellent ability to communicate effectively in writing and verbally with internal and external partners,, including clients, subcontractors, and utility companies. Excellent time and project management skills. Very organized, dependable, and professional. Experience with mandatory/regulatory permitting at federal, state, regional, county, and local levels is a plus. Proficiency at producing construction documents using AutoCAD Civil 3D. Locations: Memphis, TN; Jackson, MS; Huntsville, AL We offer a competitive salary, health benefits and paid vacation. Veterans, HUBZone residents, and individuals of HUD-assisted (Section 3) and Section 8 housing programs are encouraged to apply. SOL Engineering Services, LLC provides equal employment opportunities to all employees and applicants without regard to race, color, religion, sex, national origin, age, disability, or genetics."

**Requisition ID:** 177550 **Job Level:** Entry Level **Home District/Group:** TIC Power District **Department:** Field Operations **Market:** Power Employment Type: Full Time As a **Field Engineer,** you bring your big ideas, commitment to top quality and unwavering work ethic. In return, we offer huge career and travel opportunities and the satisfaction of building "the next big thing" from the ground up. There's a reason Kiewit attracts the best: we offer fast-paced excitement and fulfillment you won't find anywhere else. Our mission is to make a difference and we offer opportunities for you to make make a difference in our construction operations. Whether we're boring tunnels through mountains, turning rivers into energy or building bridges that connect communities, we depend on our passionate, skilled, and safety-obsessed construction professionals to get it done right. **District Overview** **TIC Power (TICP)** provides direct-hire construction services for Power Generation utilizing a non-union craft force. TIC Power builds major EPC and bid-build natural gas power plants, solar fields and energy storage systems throughout North America. All of Kiewit Power is committed to Kiewit's "Nobody Gets Hurt" Philosophy. **Location** Although headquartered in Kansas City, our TIC Power district have projects that span across the entire US. Our projects may be built in large cities, small towns, or very remote locations, so our people must be willing to go where the work is. Job assignment location will be determined closer to your start date. Field engineers may do rotations between the field and office work. Candidate must be open to traveling and relocating as business requires. **Responsibilities** + Work with a vibrant and diverse team to build, estimate, and schedule mechanical, electrical and heavy industrial construction. + Support both administrative and construction activities as assigned by supervisor; review proposals, specifications and drawings, perform material takeoffs, prepare cost estimates and attend pre-bid investigation meetings. + Learn to supervise subcontractors and communicate with vendors. + Prepare work plans, assure quality control, manage and track costs and materials, schedule equipment, administer safety programs and maintain exceptional owner relations. + Relocate as required. **Qualifications** + Bachelor's degree in Construction Management, Electrical, Mechanical or Civil Engineering + Knowledge of construction safety and current federal & OSHA requirements + Broad knowledge and ability to understand project scheduling and cost control as well as to read and understand project owner specifications and engineering drawings + Working knowledge and experience with Microsoft Office + Familiarity with SureTrak, Hard Dollar, Revit, SAP, Pro Log and/or Primavera "P6" is a plus + Strong organizational and time management skills + Strong written and verbal communications skills; strong attention to detail with the ability to recognize discrepancies + Strong work ethic - highly motivated and willing to do what it takes to get the job done right + Ability to work independently as well as part of a team + Ability to freely access all points of a construction site in wide-ranging climates and environment + Ability to travel and/or relocate as required + Reliable transportation to and from work \#LI-KK Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: TIC