Project engineer jobs in Myrtle Grove, FL

Job Description Thompson Engineering is looking for a qualified Project Geotechnical Engineer. Project-Level Geotechnical Engineer The Project-Level Geotechnical Engineer is responsible for performing geotechnical engineering analyses and managing projects of varying scope and scale under the guidance of a Senior or Principal Engineer. This role supports transportation, heavy industrial, and infrastructure projects. Key duties include proposal preparation, fieldwork, engineering calculations, coordination of field and laboratory tasks, client interaction, and general civil engineering support. Key Responsibilities Technical & Field Duties Perform and/or lead field drilling services and associated engineering analysis and calculations Prepare geotechnical recommendations, designs, plans, and specifications Conduct observation and inspection services Write, prepare, and review related technical reports Perform field work including: Logging borings Supporting cone penetration testing (CPT) operations Performing geotechnical field testing Working alongside drill rigs and drilling crews, and/or on active construction sites related to Construction Materials Testing (CMT) services Project Management & Coordination Review construction drawings for compliance with plans and specifications Prepare proposals and cost estimates Track and evaluate project budgets and progress; recommend changes as needed Assign, review, and evaluate laboratory or field data for inclusion in reports Design & Engineering Research and resolve design and construction problems Assist with the initial design and investigative approach for major project phases Apply sound engineering principles and communicate technical concepts to both technical and non-technical stakeholders Plan, schedule, and coordinate engineering tasks involving both conventional and complex design requirements Leadership & Oversight Provide technical review and direction for complex investigations Supervise analysis and ensure findings and recommendations are clearly formulated in client reports Review and approve engineering documents and technical deliverables Qualifications Minimum Requirements Bachelor's degree in Engineering (Master's degree preferred) from an ABET/EAC-accredited program 0-5 years of experience in Geotechnical Engineering Ability to lift 50 lbs Willingness and ability to travel Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Join Our Team as a Port Services Project Engineer at APTIM! Are you passionate about engineering the structures that keep our ports and harbors moving? APTIM, a recognized leader in engineering and technical services for the maritime industry, is seeking a Port Services Project Engineer to join our team in either Mobile, Alabama or Charleston, South Carolina. As a key member of our Ports Services Group, you'll support projects involving the inspection, analysis, and design of structural systems for cranes, piers, wharves, and other critical port infrastructure. At APTIM, you'll work alongside experienced structural, mechanical, and electrical engineers to assess and solve complex challenges across the Gulf and Atlantic coasts. On the equipment side our work spans condition assessments, structural and mechanical repairs, retrofits, and new installations for container cranes and heavy maritime equipment. On the facilities side our work includes condition assessments, structural repairs, retrofits, and new design of critical port infrastructure. Using tools such as Mathcad, RISA, and AutoCAD, you'll contribute directly to analysis, design development, and the preparation of engineering deliverables that enhance reliability and performance in the port industry. Job Overview: We're seeking an engineer with a solid foundation in structural design who enjoys applying technical expertise to field investigations and detailed analysis. In this role, you'll participate in inspections, prepare technical reports, develop repair and design solutions, and collaborate with project managers to deliver practical, constructible outcomes for our clients. This position offers outstanding opportunities for professional growth and hands-on engineering experience in a technically diverse and rapidly evolving field. If you're ready to help shape the future of port and harbor infrastructure while advancing your career with a dynamic, forward-thinking company, we'd love to hear from you! Key Responsibilities/Accountabilities: Report to the Port Services Project Director and serve as a core member of the structural engineering team supporting port and harbor projects across the Southeast. Support and perform structural inspections of cranes, waterfront structures, and other port facility assets to assess condition, identify deficiencies, and develop repair recommendations. Assist in the development of detailed repair, retrofit, and new design drawings and calculations for steel and concrete structures, including crane components, piers, wharves, foundations, and pile-supported systems. Perform structural analysis and design using engineering tools such as RISA, Mathcad, and AutoCAD; assist in design reviews for new equipment and facility improvements. Collaborate with project managers to ensure technical deliverables meet project scope, schedule, and quality objectives. Participate in field work and inspections--approximately 10% of workload--including work at height, over water, or within industrial environments. Engage directly with client project managers and technical staff to coordinate ongoing and upcoming work and ensure responsive communication. Contribute to proposal development and the preparation of technical scopes, cost estimates, and schedules. Coordinate with multidisciplinary engineering teams, including mechanical, electrical, civil, and geotechnical disciplines, to deliver integrated port and crane engineering solutions. Support the continued growth of APTIM's digital inspection and asset management initiatives by applying innovative technologies and data-driven methods. Maintain an adaptable balance between office-based design and field-based activities, with limited travel (approximately 10%) throughout the Southeast. As the office expands, provide mentorship and technical guidance to junior engineers and inspection staff. Representative Projects: Structural inspections and condition assessments of container cranes, mobile harbor cranes, and other heavy lifting equipment. Design and repair of steel and concrete port structures, including piers, wharves, foundations, and pile-supported systems. Retrofit and upgrade design for waterfront structures and crane support systems to meet current load, safety, and operational requirements. Design review and technical support for new equipment procurement, including load path analysis and integration with existing port infrastructure. Port expansion projects, including new wharf construction, quay wall design, dredge integration, and associated infrastructure upgrades. Multi-disciplinary projects involving coordination with mechanical, electrical, civil, and geotechnical teams to deliver comprehensive port engineering solutions. Implementation of digital inspection methods and data-driven maintenance strategies for ongoing port facility management. Basic Qualifications: Bachelor's Degree in Civil or Structural Engineering required. Professional Engineer (P.E.) license preferred, or the ability to obtain licensure within 12 months of hire. 5-10 years of progressive structural engineering experience with emphasis on steel and concrete design. Experience with cranes, waterfront structures, or other heavy industrial or marine infrastructure strongly preferred. Proficiency in structural analysis and design software such as RISA, Mathcad, and AutoCAD; familiarity with Bluebeam and Autodesk Construction Cloud a plus. Demonstrated ability to perform and interpret engineering analyses and translate findings into practical repair and design solutions. Strong technical writing skills with experience preparing inspection reports, calculations, and design documentation. Excellent communication skills and the ability to interact directly with clients, project managers, and multidisciplinary teams. Ability to balance office-based analysis and design work with occasional field assignments (approximately 10% travel). Commitment to safe work practices in industrial and marine environments, including work at height and over water. Interest in applying innovative tools and digital inspection methods to improve efficiency and data quality. Passion for working in a consulting firm environment on a diverse portfolio of port and harbor projects. Primary work location in Mobile, AL or Charleston, SC. ABOUT APTIM APTIM is committed to accelerating the transition toward a clean and efficient energy economy, building a sustainable future for our communities and natural world, and creating a more inclusive and equitable environment that celebrates the diversity of our communities. We specialize in environmental, resilience, and sustainability and energy solutions, as well as technical and data solutions, program management, and critical infrastructure. For every challenge our clients face, there is an opportunity for APTIM to innovate a fit-for-purpose solution that will raise your organization or community to a new standard of excellence. What you can expect from APTIM: Work that is worthy of your time and talent Respect and flexibility to live a full life at work and at home Dogged determination to deliver for our clients and communities A voice in making our company better Investment into your personal and professional development As of the date of this posting, a good faith estimate of the current pay range for this position is $110K - $125K per year. Compensation depends on several factors including: experience, education, key skills, geographic location of the position, client requirements, external market competitiveness, and internal equity among other employees within APTIM. Employee Benefits Aptim Environmental & Infrastructure, LLC is committed to providing an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace ************************************ Medical, vision, and dental insurance: Through the marketplace, our employees can choose benefits from five metallic levels and 10+ carriers to find the right benefits that work for them in their location. Life insurance Short-term and long-term disability insurance 401(k) APTIM offers three 401k plans through the Aon Pooled Employer Plan (PEP). The specific plan you are eligible for depends on the business unit you are in. The details of the largest plan are found here: APTIM 2025 401(k) Plan Features (makeityoursource.com) APTIM - Helpful Documents Paid holidays, vacation, and sick leave (eligibility based on company policy and applicable law) Watch our video: About APTIM - In Pursuit of Better

Project Engineer opportunity with Traylor Bros., Inc.! Traylor Bros., Inc. (TBI) National Heavy Civil division provides comprehensive, cutting-edge heavy civil/underground construction services through traditional and non-traditional delivery methods. TBI has completed more than 135 complex bridge construction and rehabilitation projects across the nation, including world record cable-stayed structures and segmental bridges. The group also has a history of providing some of the country's largest port authorities and the maritime industry with the construction of deepwater container piers, wharf facilities, transit terminals, locks, and dams. What makes us different? Our Mission is to excel at constructing complex infrastructure safer, better, and faster by engaging the entrepreneurial and innovative spirit of our team members and providing limitless opportunity for personal and professional growth in a close-knit and collaborative organization. Our Core Values: Safety. We are committed to providing a safe work environment. This is always our priority. People. Our talented team is our greatest asset. We provide opportunity, reward performance, and support a positive and balanced work environment. Innovation. We have the ability to engineer creative solutions to overcome any obstacle. Ethics. We are honest and ethical in all our business dealings. Communication. We encourage open and honest communication throughout our organization. Community. We add value to our industry and the communities in which we work. Position Summary: Manages daily operations including the staff. Plans, directs, and coordinates activities of designated project to ensure that goals or objectives of project are accomplished within prescribed time frame and budget parameters by performing the following duties personally or through subordinate supervisors. Key Tasks and Responsibilities: * Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources * Confers with project staff to outline work plan and to assign duties, responsibilities, and scope of authority * Directs and coordinates activities of project personnel to ensure project progresses on schedule and within prescribed budget * Reviews status reports prepared by project personnel and modifies schedules or plans as required * Prepares project reports for management, client, or others * Confers with project personnel to provide technical advice and to resolve problems * Coordinates project activities with Traylor personnel and joint venture partners * Responsible for the overall direction, coordination, and evaluation of the project; including safety, performance, budget, scheduling, equipment management and quality * Leads the project team * Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws * Work with and be part of the estimating departments during project procurement phases * Assume additional responsibilities as directed by division and corporate management. Travel as required to attend, but not limited to, meetings, site visits, training, etc. Ability to relocate as needed Required Skills Skills and Abilities: * Analytical skills * Problem solving skills * Communication skills * Interpersonal skills * Ability to work on a team * Leadership ability * Organizational skills * Mathematical skills * Technical skills Required Experience Education/Experience: * Bachelor's degree required or 10 years of supervisory experience in the industry * At least 5 years of heavy civil construction experience required * Design, project management and supervisory experience required * Marine and Foundation Construction experienced preferred EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

We are in search of a Project Engineer with Civil or Environmental experience. Required: The ideal candidate will have a minimum of four (4) years of experience (less MAY be considered) and preferably working in or with heavy industry including but not limited to oil and gas, pulp and paper/wood products, and/or chemical industry as well as public sector entities including local, State and Federal agencies; The Engineering candidate shall be a licensed Professional Engineer (P.E.) in at least one (1) southern state with those holding multiple States being considered more-closely. An EIT may be considered also if they have the right experience. Experience planning, designing, developing construction specifications and schedules, and overseeing construction and maintenance of civil, structural and environmental infrastructure. Experience with multi-media environmental permitting and compliance including air, solid / hazardous waste, wastewater, and stormwater. Experience with environmental assessment and remediation for RCRA and CERCLA types projects. Project management experience in civil and environmental projects with past responsibility for developing business to sustain or grow work backlog. General Duties: Candidate will work on assessments, remediation, etc. to support induistrial clients such as oil and gas and pulp and pater. Ensure staff and deliverables are prepared and delivered in strict accordance with client and regulatory requirements;Proven experience in design, project management and engineering verification. Independently plan, perform and coordinate advanced level professional and technical engineering studies, computations, drawings, reports and surveys. Ability to provide technical leadership and mentoring junior to mid-level staff. Ability to prepare technical reports, permit applications, management plans, and project proposals.Ability to perform steadily during peak workload and remain calm under pressure Ability to inspire and drive a culture of inclusive, high performing integrated teams Proficient in the use of a range of computer software programs and models for evaluating and developing detailed designs including CADD, GIS, and hydraulic/hydrologic applications. Proven ability to manage and develop a technical staff of engineers, scientists, planners and/or construction managers and quality assurance technicians; Proven sales experience with ability to develop business with existing and new clients. Exceptional research, technical writing, and verbal communication skills required. Ability to work in harsh environments and conditions ranging from remote forests to open construction sites. Understanding and experience in GIS and GPS technology and equipment are preferred. Self-motivated and capable of working on multiple projects simultaneously in a fast-paced team environment. Availability to travel with multiple overnight stays during some weeks.

Austal USA is searching for a skilled marine engineer or technician with hands-on experience in Diesel Electric Propulsion (DEP) and Machinery Control Systems. The ideal candidate will support mechanical and electrical system design, troubleshooting, and integration activities across propulsion and power-generation equipment. Strong diagnostic skills, familiarity with automation/control interfaces, and the ability to work in a dynamic maritime engineering environment are essential. Austal USA is recognized for its advancements in naval ship design and construction, presenting distinctive opportunities for team members to participate in influential initiatives shaping the maritime sector now and in the future. With a heritage rooted in innovation, Austal USA has been instrumental in propelling naval technology forward through sophisticated design, engineering, and delivery of Littoral Combat Ships (LCS), Expeditionary Fast Transport (EPF) to the recently awarded Offshore Patrol Cutter (OPC), Expeditionary Medical Ship (EMS), and the T-AGOS ocean surveillance vessels. What sets Austal USA apart is our commitment to innovation and our dedication to building the best ships for the United States Navy and the United States Coast Guard. We actively cultivate a culture fueled by intellectual curiosity and diverse perspectives, where every team member is integral to delivering cutting-edge solutions. REPORTS TO: Deputy Program Engineer SUPERVISES: Directs the work of engineering personnel assigned to the Project Team and engineering activities as directed by the Deputy Program Engineer. SUMMARY: Responsible for technical/operational leadership of project(s) in a matrixed environment by performing technical studies to define, generate and review project requirements, monitoring the assigned project(s) to ensure work scope, schedule, and budget are well defined and maintained, and coordinates between resource managers/supervisors and ensures reviews and approvals are received. DUTIES / RESPONSIBILITIES: Responsible for technical/operational leadership of assigned project(s)/mission within the programmatic guidelines set by the Program Manager and customer. Oversees and directs the work of assigned Engineering personnel to related projects. Defines, generates, and reviews project requirements documentation within defined scope. Monitors project to ensure work scope, schedule, and budget are well defined and maintained. Ensure resolution of engineering, material and planning issues Ensure implementation of improved engineering processes Provides the coordination between resource managers/supervisors and ensures all necessary reviews and approvals are received. Interacts with other business departments such as Finance, Production Control, Supply Chain, Program Management, etc. Complies with Austal's employee handbook general guidelines, company procedures and policies. Act as a Compliance Champion for the organization and work to promote a culture of compliance throughout the organization. Support business unit Tier 1 Compliance Lead in responsibilities as required. QUALIFICATIONS / KNOWLEDGE / EXPERIENCE: Bachelor's Degree in Engineering AND five (5) years' experience in either shipyard design and large ship construction or as a Cognizant Engineer over multiple systems or similar large scale engineering design project (i.e. offshore platforms), OR three (3) years' degreed Engineering experience at Austal USA. In lieu of Bachelor's Degree in Engineering, High School diploma/GED and eight (8) years of equivalent relevant experience. Demonstrated knowledge of Shipbuilding specifications such as ABS, Mil, API, and other similar general construction specs required. Experience in identifying and anticipating design/production work sequence conflicts required. Excellent written and oral communication skills required. Demonstrated knowledge of scheduling, possess an ability to monitor progress to schedule and adhere to strict deadlines required. Demonstrated knowledge of ship building production such as build strategies, critical path, and production milestones required. Computer literate and familiar with AutoCAD, Microsoft Office products Demonstrated knowledge of ship engineering systems required. Willingness and ability to spend time onboard the vessel going up and down staircases and vertical ladders required. Working knowledge of Maritime Regulatory Authorities (i.e. ABS, DNV, GL, NAVSEA, MIL, USCG, IMO, etc.) required. Experienced in the construction of high speed aluminum vessels preferred. Demonstrated knowledge of large modular construction methods preferred. Experienced in design and construction of US Navy vessel preferred. Demonstrated understanding of shock design preferred. ADDITIONAL GUIDELINES: All candidates must meet Austal USA's basic employment eligibility guidelines: 18 years or older at time of application Able to provide proof of US Person status (permanent resident or citizen) No felony convictions of theft/deception or violent crimes within seven years from disposition date No felony convictions of drug crimes within three years from disposition date Willing to submit to a drug screen Willing to submit to a background check Must be able to obtain and maintain required Security Clearance. TOOLS: Computer - MS Office, AutoCAD DIRECTION EXERCISED: Coordinates the work of Engineers, Designers and Draftspersons assigned to the Program. DISCRETION EXERCISED: As assigned by the Deputy Program Engineer LIAISES WITH: Engineers, Designers, Draftspersons, Production Personnel, Production Control, Supply, Logistics, Regulatory Bodies, Program Management and Equipment Suppliers PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels and work sites. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. The employee is occasionally required to sit. Specific physical requirements include the following: Must have the ability to bend, squat, stoop, crawl, and kneel. Perform prolonged standing. Ability to turn head from side to side and about the vertical axis. Ability to turn body at the waist from side to side and about the vertical axis. Lift/push/pull 50lbs to 75lbs on an occasional basis. Lift/push/pull up to 20lbs on a frequent basis. Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps). Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts. Able to work at a variety of levels (ex. waist, eye, overhead). Demonstrate the ability to safely and appropriately use required tools and equipment. Demonstrate good balance while working on uneven surfaces and maneuvering obstacles. Possess sufficient handgrip and coordination to carry and operate tools and equipment. Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards. Ability to withstand cold and hot temperatures. Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time. Able to respond to verbal and audible sounds/commands. Able to utilize adequate visual skills. Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down. Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to humid conditions, bright flashing lights, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles at or below the PEL, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud, + 90 dB. SAFETY Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks. Equal Employment Commitment Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: ************. Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

Are you self-motived with a drive to succeed? Do you enjoy people but function well independently? Are you someone who thrives when multi-tasking while pursuing excellence? Do you have a natural sense of urgency but care about the details, and enjoy following established processes and procedures? Do you enjoy working outdoors and don't care to ride a desk for eight hours a day. Are you looking for an exciting opportunity to plant, develop and grow a career with a thriving company, in the construction space? If the answer to any or all of these is yes than you can STOP LOOKING because BECI is the COMPANY YOU'VE BEEN SEARCHING FOR! We are currently seeking a Project Manager or Project Engineer, to join our team in the Pensacola, FL market. This position is considered local however, out of market travel will be required on occasion to train and to support other branches/markets. Previous Building Enclosure experience is a plus but, if you don't have that, don't worry, we're really good at teaching and...WE WILL TRAIN YOU! STEPS FOR APPLYING 1 - Complete the application through the online portal and submit your resume. 2 - Complete the Culture Index Survey via the link you receive in our response email. Responsibilities Assisting with troubleshooting building envelope issues. Going onsite to construction sites to provide support and quality analysis. Producing reports based on investigations. Assisting with the preparation of construction specifications. Providing technical support to staff, as required. Attending trade shows, seminars and educational programs to keep abreast of industry trends and ensure continued professional development. Qualifications Bachelor's degree from an accredited college in a related discipline (engineering/construction management) or equivalent experience in the construction industry. IIBEC credentials (RRC, RRO, RWC, or REWC), or EIT certificate a plus, but not required. Compensation This position is salary-based with the potential for quarterly performance-based bonuses. The salary is competitive and generally exceeds the national average. Benefits Medical, Dental and Vision insurance, as well as, an HRA card for medical, dental, and vision expenses 401K plan Paid holidays, as well as, Paid personal time off (PTO starting at 117 hours pro-rated per annual) Relocation reimbursements Vehicle allowance or travel reimbursement Continuing education reimbursement Do not forget the survey: To be considered for this position, along with submitting your resume, please complete the Culture Index survey by either clicking or copying this link (****************************************** and pasting it in a web browser. The survey should take you no more than 10 minutes to complete. About Us: BECI provides purposeful and attentive building envelope consulting services to help optimize all six sides of your building. We are client-focused, using our team's extensive knowledge to help you set and meet your goals. We filter everything we do through the lens of our 4 core values (People, Knowledge, Servant, and Balance) so that we can retire our customers and employees. We do this through our BECI Sensible ApproachTM utilizing our three “C's” of Context, Consistency, and Clarity. This methodology enables the fastest-reporting turnaround time and most competitive pricing.

Job Title: Project Engineer- Tyndall AFB ***Work Location: Panama City, FL*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Responsible for observation and reporting on assigned projects to government personnel. Oversees construction, contract administration, and quality assurance activities in accordance with established policies, procedures, and regulations. Analyzes design and construction issues with respect to contract requirements. Delivers recommendations regarding compliance to contract provisions and exercises engineering judgment to assist in the development of solutions between conflicting plan details or requirements which become evident as construction progresses. Make technical interpretations of drawings and specifications; provide engineering determinations on meeting the contract requirements. Review submittals, respond to contractor questions, RFIs, construction deficiencies, project issues, requests for equitable adjustment, and claims. Assist in preparing documents for change orders and claims. Reviews schedule items and pay applications to ensure balance with percentages for each corresponding work feature or component of work. Reviews contractor's submittals including QA and Safety Plans. Provides field surveillance and delivers daily detailed reports. Reviews drawings and specifications. Assists in preparation of scope of work modifications and cost estimates. Provides safety oversight. Utilize Resident Management System (RMS). Education/Experience: Bachelor's Degree in related field 10 years of experience on large complex multimillion dollar federal construction projects, preferably Department of Defense Facilities experience with administrative buildings, airfield facilities and apron, barracks, water and electrical systems, and roadways. Experience with Three-Phase QC/Inspection process Experience preferred EM 385-1-1 USACE Safety Manual Experience with Resident Management System (RMS) Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Job Description Project Engineer Employment Type: Full Time, Salaried Exempt Experience Level: Entry to Mid-Level, zero to three years A growing Atlanta based construction firm is seeking a motivated Project Engineer who wants to build a long-term career in commercial construction. This role is ideal for someone who wants hands on learning, exposure to both field and office operations, and a clear path toward becoming an Assistant Project Manager and eventually a Project Manager. Project Engineer is the operational support hub for the project team. You will manage documentation, coordinate with the design team, support procurement, assist with financial tasks, and maintain regular job site engagement. This is a learning centered role with direct mentorship from experienced Project Managers and Superintendents. Key Responsibilities Document Control and Information Management • Manage submittals, review shop drawings for compliance, and coordinate approvals with the design team • Draft and process RFIs and track responses to support field operations • Prepare agendas and detailed meeting minutes for OAC and internal meetings Project Management and Procurement Support • Assist with subcontractor buyout, scope review, material procurement • Track lead times and delivery schedules to maintain project flow • Support monthly pay applications, invoice coding, change order pricing, and other financial tasks • Lead the project closeout process by collecting warranties, manuals, and as built documents Field Support and Quality Control • Walk the job site regularly with the Superintendent to understand sequencing and verify progress • Document safety observations and support quality control checks • Manage the punch list process and coordinate subcontractors to complete final items • Maintain organized photo documentation using Procore or similar software Qualifications • Bachelor's degree in Construction Management, Civil Engineering, Architecture, or related field • Zero to three years of commercial construction experience such as internships, co-ops, or entry level roles • Proficiency with Microsoft Excel, Microsoft Project, and Bluebeam Revu • Familiarity with Procore or similar construction management software is a plus • Strong written communication skills and attention to detail • Eagerness to learn, willingness to ask questions, and a proactive mindset Work Environment and Physical Requirements • Hybrid work setting that includes office work and active job site presence • Ability to walk job sites, climb temporary stairs, and wear PPE • Ability to occasionally lift up to twenty pounds Compensation and Benefits Competitive salary, performance bonuses, medical, dental, vision, 401K, and a clear professional growth pathway. You will receive hands on mentorship and opportunities to advance quickly within the organization.

The Project Manager / Civil Engineer will work with other engineers and CAD technicians on various civil, solid waste, and environmental related projects in our Daphne, AL office. The projects are challenging and provide unique design opportunities. You will be responsible for designing solid waste facilities that will enable LaBella to create sustainable, cost-effective solutions tailored to the specific needs of our clients. The projects are intricate and incorporate both civil and environmental engineering skills, including land development (grading and stormwater management); leachate collection, treatment, and management; renewable energy designs; and organic waste management. Brand new, already operational, and closed solid waste facilities face many different types of challenges - there is never a dull moment, nor is there a cookie-cutter solution that fits every similar situation. Duties * Projects will include solid-waste related site development projects: develop master plans, design drawings, design of stormwater management and erosion control systems, technical specifications, and cost estimates * Prepare various types of related reports and studies to secure permitting for projects * Draft work for scoping/conceptual work/engineering packages * Assist with oversight and guidance of projects from initial concept through construction * Assist in the preparation of project proposals * Collaborate, mentor, and lead as appropriate * Prepare preliminary engineering reports * Perform and review detailed calculations: stormwater management, leachate generation and pipe sizing, slope stability, and compaction density * Produce effective and high-quality project documents (including reports, drawings, and specifications) * Assist clients with construction procurement * Provide bidding and construction administration services * Manage project budgets and schedules

Impact Recruitment is currently searching for a highly motivated Project Engineer/Project Manager to join our client's team in the East Gulf Region in Mobile, AL. This is a production focused position that will be leading and managing utility projects. Water/wastewater experience is required. Focused on creating inspired careers, our client offers excellent opportunities for career growth and professional development within their organization. What you'll be doing: Manages projects to meet contracted budget, scope, and schedule. Performs engineering design for various utility projects, including water and wastewater, fiber/telecommunications, and natural gas. Oversee and guide designers and drafters to deliver utility projects. Responsibilities may include applying established and well-defined engineering techniques, procedures, policies or standards. Perform design computations, check plans or computations, and develop quantity takeoffs. Adjusts and correlates data, recognizes discrepancies in results. Applies standard practices and techniques to accomplish work assignments. Participates in ongoing development, communication and implementation of team concepts, programs and policies. Coordinates work to ensure best practices with all team members. Attends appropriate team meetings. Adheres to company standards for quality assurance and quality control as defined in the quality manual. What you need to have: Bachelor's degree in Civil Engineering 5-12 years of utility design experience Experience using AutoCAD Civil 3D and MicroStation preferred Registered Professional Engineer (PE) in Alabama is desired but not required Ability to work well with other related disciplines and coordinate design activities for timely completion and within resource budgets Experience and ability to exercise initiative and independent judgment in the solution of work problems Hydraulic modeling experience preferred About Impact Recruitment: At Impact Recruitment, our goal is to facilitate the partnership of innovative organizations and inspired individuals seeking to affect positive social and environmental impact in our communities. We invite you to consider a career opportunity through Impact Recruitment. Contact us today at info@impactrecruitment.com/************** to learn more about our position and to see whether this is the right career fit for you! Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus US Manufacturing Facility is looking for a Robotics Engineer to join our Final Assembly Line Engineering Department based in Mobile, AL. The Robotics Engineer is responsible for supporting operations needs pertaining to robots and automated industrial assets deployed within the Airbus Mobile manufacturing site. They maintain machines, propose industrial improvements, work closely with all engineering principals and with Airbus Robotics to monitor the status and implement solutions that sustain and increase the reliability and efficiency of the machines at aircraft production facilities. Meet the team: Our Engineers at the Airbus U.S. Manufacturing facility take our aircraft from concept to customer delivery - working with production teams on every aspect of assembly from managing technical information, quality control, maintenance tasks and health & safety - along flowlines and flightlines. Join our team and watch our aircraft come to life. Your working environment: Nearby on ‘Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How we care for you: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”). Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: Primary Responsibilities: Ensure the continued operation of robotic and other automation systems onsite, including preventative maintenance, diagnostics, and continuous improvement. Perform root cause analysis of failures, and propose remediation in a timely fashion with effective countermeasures Analyze customer feedback including warranty requests and generate prioritized actions to address shortcomings associated with the Mobile Manufacturing Site (MMS). Monitor customer satisfaction and machine performance. Perform troubleshooting and repairs in MMS. Perform application programming on specialized platforms with applications in automation and robotics. Serve as a liaison between Airbus operations and Airbus Robotics to resolve problems and inquiries. Where necessary provide basic training for the operators. Support early concepts of corrective designs and thoroughly test them with the Original Equipment Manufacturer (OEM). Help develop a strategy for the verification of the corrective designs and participate in verification activities. Level 2 is indicative of knowledge that can be applied with guidance or supervision. Exercises discretion and independent judgment in the application of specialized knowledge on work that is predominantly intellectual and for which the output produced or the result accomplished cannot be standardized in relation to a given period of time. Embraces company culture and values through exemplary execution and behavior. Contributes to company technical strategy. Holds themselves and others accountable. Guides and trains more junior members of the team. Troubleshoot and resolve electromechanical issues. This includes work with tools such as DMMs, oscilloscopes, etc. Will perform hands-on work to maintain robotics and automation. Maintain expert level of product knowledge and application. Assist in the design and development of new products and tools and provide support for various engineering design activities within the Airbus Operations scope. Travel domestically to OEM sites to perform training if needed. Maintain service records or documentation of equipment or systems. Establish and maintain positive customer relationships. Travel Required: 20% Domestic and International Willing to make extended trips (1-3 months) to Airbus Robotics HQ in Seattle for initial extensive training. Your boarding pass: Required: Eight or more years of relevant experience OR, Four or more years of experience with a Bachelor's degree OR, Two or more years of relevant experience with a Master's Degree. Required: Troubleshooting electromechanical problems, identifying the most likely faults in the mechanical, electrical or software depending on the fault. Able to execute day-to-day work safely and without instruction or guidance. 4+ years' experience testing and troubleshooting in Robotics or Industrial automation. Train customers and colleagues in maintenance and operation activities Be driven to achieve customer satisfaction including qualities such as responsiveness, quality, and on time delivery. Demonstrated troubleshooting and root cause analysis skills. Tenacious problem solver organized and detail oriented. 5 years of industrial experience, preferably in the Robotics industry. Proficiency with machine shop tools: drill press, lathe, sanders, and band saw. Working knowledge of the following platforms: Windows 7 desktop and Linux embedded products. The knowledge and interpersonal capability to work within an engineering development team that spans multiple disciplines (electrical, software, mechanical, systems engineering). Excellent skills with typical productivity tools such as Microsoft Office and Google Docs. Preferred: Motor tuning procedures for many classes of motors, especially DC brushless servos and associated PID tuning for point-to-point and free-running applications. This includes the ability to troubleshoot poorly performing motor systems and apply solutions through improved tuning parameters or techniques. Embedded system development including: circuit board development and troubleshooting, commercial microprocessor platforms and architectures (e.g. ARM), and memory management. Mechanical and electrical design tools such as Solidworks, Catia, Altium, etc. Safety risk assessments including: identifying risks, and appropriately mitigating those risks according to required performance levels. PLCs and safety controllers, especially Siemens products Electromagnetic Compatibility, including emissions and immunity. Researching and selecting appropriate sensors for a given electromechanical design. Knowledge of standards such as ISO 9000. Required: Excellent verbal and written English skills. Ability to communicate quickly, clearly, and concisely. Provide professional, consistent, calm, clear and confident oral and written communication. Works well in high pressure situations, during tight deadlines, and in front of customers. Knowledge of ASTM standards and testing methods. Beneficial: French, German. Physical Requirements: Onsite: 100% Vision: Able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. Hearing: Able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. Speaking: Able to speak in conversations and meetings, deliver information and participate in communications. 100%, daily. Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. 100%. Carrying: Able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Lifting: Able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Pushing / Pulling: Able to push and pull small office furniture and some equipment and tools. Sitting: Able to sit for long periods of time in meetings, working on the computer. Squatting / Kneeling: Able to squat or kneel to retrieve or replace items stored on low shelving. Standing: Able to stand for discussions in offices or on the production floor. Travel: Able to travel independently and at short notice. Walking (include routine walking such as to a shared printer to retrieve documents): Able to walk through office and production areas including uneven surfaces. Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing. Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: On-site Job Family: Manufacturing Engineering ------ ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

**Outside Recruiters Please Do Not Contact Us** Summary/Objective We are seeking an experienced Project Engineer to assist, support, and collaborate on the safe and profitable management and execution of projects. The candidate will work with their assigned project manager to help achieve their respective project management objectives. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Develop and implement project execution strategies Maintain and communicate various project performance metrics and analytics Provide leadership and support to functional area managers Support forecasting and reporting Act as a liaison between the superintendent and the subcontractors in coordinating the delivery date of materials by analyzing the schedule and the required installation dates. Construction engineering Work with subcontractors and vendors Foster and maintain favorable relationships with project stakeholders Market and promote the Superior Construction brand Other Assist with the leadership and development of team members Foster and maintain a safe work environment Strong interpersonal, written, and verbal communication skills All other duties as assigned Competencies Ethical Conduct Diversity and inclusion Results driven Teamwork orientation Excellent analytical, organizational, and communication skills Supervisory Requirements This position will not have any direct reports. Work Environment Additionally, a pressurized environment is the norm. The employee will be working on heavy civil and highway construction sites. The noise level in the work environment and job sites can be loud. The position regularly works near moving mechanical parts and in outdoor conditions that include inclement weather, heat, humidity, and exposure to dust and asphalt. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to navigate rugged terrain, climb substantial heights, and work over and on water. The position requires good manual dexterity (hand, hand with arm, two hands) and multilimbed coordination. The employee must have excellent stamina. Position Type/Expected Hours of Work This is a full-time exempt position. This position sometimes requires long hours, holidays, and weekend work. Travel The role will require up to 30% of travel. Required Education and Experience BS Construction, Engineering, or other relevant fields of study Entry-level to four years of industry tenure Field-based project execution experience Field-based leadership roles Knowledge of route surveying and scheduling Strong oral and written communication skills Safety Trained Supervisor Construction Certification Preferred Education and Experience Viewpoint experience is a plus Additional Eligibility Requirements Must possess or be able to obtain a valid and appropriate state driver's license before employment. OUR MISSION AND VISION We are an American family-owned and operated heavy civil contractor dedicated to providing innovative solutions to help meet the nation's growing infrastructure needs. To be America's preferred heavy civil contractor, expanding our markets and services while staying true to our family-oriented culture and fostering an environment where our employees can prosper. Our Core Values: Family Safety Integrity Innovation Commitment Empowerment Equal Opportunity Employer Upon hire, you will be provided with a copy of your specific . Please note s are not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. THE COMPANY RESERVES THE RIGHT TO MODIFY, INTERPRET, OR APPLY THIS IN ANY WAY THE COMPANY DESIRES. THIS IN NO WAY IMPLIES THAT THESE ARE THE ONLY DUTIES, INCLUDING ESSENTIAL DUTIES, TO BE PERFORMED BY THE EMPLOYEE OCCUPYING THIS POSITION. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. THE EMPLOYMENT RELATIONSHIP REMAINS “AT-WILL.” QUALIFIED EMPLOYEES WHO, BECAUSE OF A PHYSICAL OR MENTAL IMPAIRMENT THAT SIGNIFICANTLY LIMITS A MAJOR LIFE ACTIVITY, REQUIRE A REASONABLE ACCOMMODATION TO PERFORM THE ESSENTIAL FUNCTIONS OF THIS POSITION SHOULD NOTIFY THEIR MANAGER OR HUMAN RESOURCES. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources. Superior Construction provides equal opportunity employment to all individuals regardless of their race, color, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus US Manufacturing Facility is looking for a Robotics Engineer to join our Final Assembly Line Engineering Department based in Mobile, AL. The Robotics Engineer is responsible for supporting operations needs pertaining to robots and automated industrial assets deployed within the Airbus Mobile manufacturing site. They maintain machines, propose industrial improvements, work closely with all engineering principals and with Airbus Robotics to monitor the status and implement solutions that sustain and increase the reliability and efficiency of the machines at aircraft production facilities. Meet the team: Our Engineers at the Airbus U.S. Manufacturing facility take our aircraft from concept to customer delivery - working with production teams on every aspect of assembly from managing technical information, quality control, maintenance tasks and health & safety - along flowlines and flightlines. Join our team and watch our aircraft come to life. Your working environment: Nearby on 'Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How we care for you: * Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP"). * Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. * Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. * Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: Primary Responsibilities: * Ensure the continued operation of robotic and other automation systems onsite, including preventative maintenance, diagnostics, and continuous improvement. * Perform root cause analysis of failures, and propose remediation in a timely fashion with effective countermeasures * Analyze customer feedback including warranty requests and generate prioritized actions to address shortcomings associated with the Mobile Manufacturing Site (MMS). * Monitor customer satisfaction and machine performance. * Perform troubleshooting and repairs in MMS. * Perform application programming on specialized platforms with applications in automation and robotics. * Serve as a liaison between Airbus operations and Airbus Robotics to resolve problems and inquiries. * Where necessary provide basic training for the operators. * Support early concepts of corrective designs and thoroughly test them with the Original Equipment Manufacturer (OEM). * Help develop a strategy for the verification of the corrective designs and participate in verification activities. * Level 2 is indicative of knowledge that can be applied with guidance or supervision. * Exercises discretion and independent judgment in the application of specialized knowledge on work that is predominantly intellectual and for which the output produced or the result accomplished cannot be standardized in relation to a given period of time. * Embraces company culture and values through exemplary execution and behavior. Contributes to company technical strategy. * Holds themselves and others accountable. * Guides and trains more junior members of the team. * Troubleshoot and resolve electromechanical issues. This includes work with tools such as DMMs, oscilloscopes, etc. * Will perform hands-on work to maintain robotics and automation. * Maintain expert level of product knowledge and application. * Assist in the design and development of new products and tools and provide support for various engineering design activities within the Airbus Operations scope. * Travel domestically to OEM sites to perform training if needed. * Maintain service records or documentation of equipment or systems. * Establish and maintain positive customer relationships. * Travel Required: 20% Domestic and International * Willing to make extended trips (1-3 months) to Airbus Robotics HQ in Seattle for initial extensive training. Your boarding pass: Required: * Eight or more years of relevant experience OR, * Four or more years of experience with a Bachelor's degree OR, * Two or more years of relevant experience with a Master's Degree. * Required: * Troubleshooting electromechanical problems, identifying the most likely faults in the mechanical, electrical or software depending on the fault. * Able to execute day-to-day work safely and without instruction or guidance. * 4+ years' experience testing and troubleshooting in Robotics or Industrial automation. * Train customers and colleagues in maintenance and operation activities * Be driven to achieve customer satisfaction including qualities such as responsiveness, quality, and on time delivery. * Demonstrated troubleshooting and root cause analysis skills. * Tenacious problem solver organized and detail oriented. * 5 years of industrial experience, preferably in the Robotics industry. * Proficiency with machine shop tools: drill press, lathe, sanders, and band saw. * Working knowledge of the following platforms: Windows 7 desktop and Linux embedded products. * The knowledge and interpersonal capability to work within an engineering development team that spans multiple disciplines (electrical, software, mechanical, systems engineering). * Excellent skills with typical productivity tools such as Microsoft Office and Google Docs. * Preferred: * Motor tuning procedures for many classes of motors, especially DC brushless servos and associated PID tuning for point-to-point and free-running applications. This includes the ability to troubleshoot poorly performing motor systems and apply solutions through improved tuning parameters or techniques. * Embedded system development including: circuit board development and troubleshooting, commercial microprocessor platforms and architectures (e.g. ARM), and memory management. * Mechanical and electrical design tools such as Solidworks, Catia, Altium, etc. * Safety risk assessments including: identifying risks, and appropriately mitigating those risks according to required performance levels. * PLCs and safety controllers, especially Siemens products * Electromagnetic Compatibility, including emissions and immunity. * Researching and selecting appropriate sensors for a given electromechanical design. * Knowledge of standards such as ISO 9000. * Required: * Excellent verbal and written English skills. Ability to communicate quickly, clearly, and concisely. * Provide professional, consistent, calm, clear and confident oral and written communication. * Works well in high pressure situations, during tight deadlines, and in front of customers. * Knowledge of ASTM standards and testing methods. * Beneficial: French, German. Physical Requirements: * Onsite: 100% * Vision: Able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. * Hearing: Able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. * Speaking: Able to speak in conversations and meetings, deliver information and participate in communications. 100%, daily. * Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. 100%. * Carrying: Able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Lifting: Able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Pushing / Pulling: Able to push and pull small office furniture and some equipment and tools. * Sitting: Able to sit for long periods of time in meetings, working on the computer. * Squatting / Kneeling: Able to squat or kneel to retrieve or replace items stored on low shelving. * Standing: Able to stand for discussions in offices or on the production floor. * Travel: Able to travel independently and at short notice. * Walking (include routine walking such as to a shared printer to retrieve documents): Able to walk through office and production areas including uneven surfaces. * Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing. * Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: On-site Job Family: Manufacturing Engineering * ----- * ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Who We Are Hargrove supplies unparalleled services in engineering, procurement, construction management, and technical services in the industrial, commercial, and government sectors. With over 2,700 Teammates in 19 offices domestically and internationally, we build long-term support relationships in the energy generation, manufacturing, research and development, and process-heavy industry in on-site support arrangements, in plant-level small projects and consulting roles, and in larger capital projects. Hargrove's key operating principle is to provide the Right People, in the Right Place, at the Right Time. We believe that relationships and partnering together provide the best results and long-term benefits for our clients. Work-life balance and flexibility are important areas of focus for Hargrove. We're happy to discuss flexible working hours, patterns, and locations to suit you and the business. What You'll Be Doing Job Summary: Generally responsible for performing all aspects for complete design of Controls & Automation engineering assignments. This position can operate as the technical lead or team member on any given project. This work will be performed under general supervision. Primary responsibilities include but are not limited to: Familiarity with and utilize department standards and policies. Familiarity with project scope, specifications, and design criteria upon assignment to a project task team. Recognizing and communicating scope and design changes promptly. Providing on-site assistance during startup. Providing technical guidance to less experienced engineering personnel in the department. Coordinating work activities with other staff members and C&A Office Leaders. Producing estimate level automation system architecture designs and bill of material generation suitable for the level of the estimate being performed on a project. Producing control system installation specifications. Developing conceptual layouts and cost studies as necessary to determine the most simple, efficient approach to solving engineering tasks at hand. Producing estimate level preliminary designs and equipment lists suitable for the level of the estimate being performed on a project. Designing control systems with an overall emphasis on ease of maintenance and completed product meeting the expectations of the client. Consulting with design leaders from other disciplines to ensure the smooth flow of vital information necessary for the scheduled completion of the project. Advising the senior engineer concerning design or scope changes which have been identified. Reviewing and checking vendor drawings and other discipline drawings for Controls & Automation input. Reviewing fabrication drawings and other construction submittals for conformance to engineering drawings and specifications. Performing fieldwork necessary to gather field data and retrieve existing control system configuration. Applying knowledge of the discipline specific methods, practices, and techniques required to engineer, design, and construct process and manufacturing projects. Applying advanced engineering techniques and analysis to complex designs. Estimating and scheduling professional service hours and assess the progress and quality of control system and HMI programming. Understanding of the skills and experience required to perform engineering and design functions. Developing small work sharing packages for interoffice execution support. This position offers a highly competitive compensation package, including paid time off, health insurance benefits, and matching retirement contributions. Ideal Background Education: Bachelor or Master of Science degree in Chemical, Electrical, or Computer Engineering from an accredited university is required. Registration: Professional Engineer (PE) registration is highly preferred. Experience: This position requires a minimum 3 years of relevant industrial experience in controls and automation engineering. Required Knowledge, Skills, and Abilities Experience in the design, implementation, testing/FAT/SAT, deployment/installation, and startup/commissioning for automation projects. Ability to understand and implement the current version of ISA S88 programming standards. Ability to understand and implement the current version of IEC 61131 programming languages and standards. Ability to understand and implement the current version of OSHA 1910.119 Management of Change. Familiarity with specifications and installation details of equipment. Ability to create accurate controls hardware installation documents from the information found on vendor equipment drawings. Ability to develop equipment specifications for medium-sized projects involving PLC's, HMI's, DCS's, SIS's, plant information management systems (PIMS), manufacturing execution systems (MES), industrial networks, etc. Experience with two or more of the following systems (DCS, PLC, HMI, or SIS) OR Extensive knowledge of at least one of the following systems: - DCS - Honeywell TDC2000/TDC3000 - Honeywell Experion - Emerson DeltaV - Yokogawa Centum 3000 - Yokogawa Centum VP - ABB 800xA - Siemens PCS 7 - Foxboro - PLC - Allen Bradley Control Logix - Allen Bradley PLC 5 - Allen Bradley SLC 500 - Allen Bradley Micro Logix - Allen Bradley Compact Logix - Siemens S7-400 - Siemens S7-300 - Siemens S7-1200 - Siemens S7-1500 - Modicon PLC's - GE PLC's - HMI - Rockwell Automation FactoryTalk View SE - Rockwell Automation FactoryTalk View ME - Wonderware - GE iFix - SIS - Triconex - Yokogawa ProSafe - Honeywell FSC and Safety Manager - DeltaV SIS - Rockwell AAdvance - Allen Bradley GuardLogix - HIMA - Triplex - Quadlog Knowledge and understanding of schedule constraints and information requirements for the production of all project deliverables. Ability to develop control system installation specifications. Ability to accurately estimate completion of assigned tasks. Ability to develop a construction cost estimate, a detailed engineering schedule, and a man-hour budget for a small Controls & Automation project or an area for a larger project. Ability to understand and apply company engineering design standards. Ability to read and interpret PFD's, P&ID's, and instrument loop sheets. Knowledge and application of TCP/IP networking protocols, media (twisted pair, coaxial, fiber optic, wireless, etc.), and equipment, including managed switches and routers. Knowledge and application of instrument field busses including sizing, installation, and operation. Familiarity with asset management concepts and systems. Ability to troubleshoot I/O problems in the field using a multimeter. Ability to troubleshoot software problems in the field. Ability to troubleshoot networking problems in the field using common isolation techniques and more advanced techniques such as equipment logs, cable testers, network sniffers/packet analyzers, etc. Knowledge and application of at least one of the following in support of control system installation: - Microsoft Windows Client - Microsoft Server Operating Systems - UNIX - Linux - VMS Ability to install and configure control system vendor software on various platforms. Proficient in the use of Microsoft Word, Excel, and Outlook. Broad knowledge of industrial networking. Good communication skills, both verbal and written. Ability to lead a small team to deliver on commitments. Ability to deliver good presentations of Hargrove Controls & Automation services. Excellent virtual team skills and cross divisional relationships Physical Requirements Ability to sit, stand, or walk for long periods of time. Preferred Skills: Experience with command line computer interfaces. Experience with Windows Domains. Experience with Windows Active Directory. Experience with creating, using, and deploying Virtual Machines. Experience with Network Security. Knowledge of Modbus protocols (Serial and TCP). Knowledge of Ethernet and LAN/WAN systems such as Cisco switches and routers. Working knowledge of CAD software, either AutoCAD or Microstation. #LI-ML1 Hargrove Culture We work to create an environment founded on trust, personal integrity, and a “team mentality” so that each person understands the value of their contributions both on a project and company-wide level. We know that each person on our team contributes to the success of our company by pairing expertise and passion to meet and exceed the needs of the clients we serve across the globe. Our safety culture protects and promotes the well-being of every person who works with us and every person touched by our work. As a 100% Teammate owned company, we proudly offer a comprehensive benefits package including, paid holidays, personal paid time off, medical, dental, vision, life, and disability insurance, 401(k), and other benefits to eligible Teammates. Equal Opportunity Employment Statement Hargrove is an Equal Opportunity/Affirmative Action employer. We do not discriminate based upon race, color, national origin, religion, age, sex (including gender, sexual orientation, pregnancy, sexual identity, marital or family status), disability, military service or obligations, veteran status, or any other characteristic protected by law. Hargrove is a drug-free workplace. The selected candidate must be authorized to work in the United States.

As an Oracle Cloud Fusion Financials Engineer, the candidate would understand the business requirements, abstract the requirements, and design a configurable, extensible, scalable, performant, robust solution for Oracle Fusion Financials. The person will be responsible for providing technical solutions to implement Oracle Cloud Fusion Financials, ensuring the designed solutions are workable by coding or piloting in key modules, and being agile and innovative to solve business problems. Individuals in this role will work on multiple highly complex projects and require technical knowledge of Oracle cloud architecture approach and have experience of Oracle cloud technology stack. In this role, the candidate will be expected to work on multiple projects and be able to collaborate in multiple engagements across the product teams. Positions in this function would be responsible for delivering professional level technical work in support of the development of applications, tools, platforms, and services. The person would need to operate within established methodologies, procedures, and guidelines and apply knowledge of principles and techniques to solve technical problems. Work is self-directed and not prescribed. Work involves understanding the customer's business challenges and producing solutions to solve the problem with enhanced features and process flows while including advanced technology components and working with system implementors and vendors. The person would also engage with various stakeholders to research and provide evidence related to IT audit questions and observation raised by Finance Internal Control Over Financial Reporting (ICFR) Team, Technology Risk Team, Internal Audit, and External Audit Teams. This position also requires independently working with various cross-functional team members to design and develop solutions and provide IT support for critical processes including supporting the IT month-end, quarter-end, and year-end tasks including the generation of vendor 1099 files and reports. The candidate must be experienced in various architecture patterns, have participated in the full Software Development Life Cycle (requirements, Design, Development, Deployment, and Support) and Agile SAFe methodologies, Be Able to Communicate Solution Requirements and Architecture with Technical and Non-technical Stakeholders. This role also requires outstanding communications skills. Navy Federal Credit Union currently does not provide sponsorship for this role. Applicants must be authorized to work in the United States without the need for current or future sponsorship. Responsibilities Be part of a team that works with the development and integration of Oracle Cloud Fusion Financials with respect to application/enterprise capabilities and software for multiple on-going projects, collaborating closely with enterprise and solution architects, aligning to most current strategies. Responsible for systems analysis, design, development, integration, enhancement, and deployment as well as application support for various applications Manage the deployment of new modules, upgrades, and fixes Develop new reports using Oracle Cloud Reporting applications Define, develop, or modify software application modules or enterprise-wide software systems using disciplined development processes Implement integration plans and interface with testing teams to incorporate plans into the integration testing process Research, evaluate, recommend, and implement information technology that aligns with business needs and meets objectives Use holistic knowledge of all products in the information technology ecosystem to plan how new systems will be built and integrated Install, maintain, and perform configuration of infrastructure applications Review solutions to ensure alignment with customer objectives, organization guidelines/benchmarks and industry best practices Provide technical direction and leadership routinely to other engineers; serve as a coach and mentor Identify potential problems in design, quality, or operation and initiate corrective action Identify opportunities to effectively mitigate risk and improve performance and functionality Independently research and provide evidence related to IT audit questions and observations raised by Finance Internal Control Over Financial Reporting (ICFR) Team, Technology Risk Team, Internal Audit, and External Audit Teams. Provide IT support for critical processes including the month-end, quarter-end, and year-end tasks including the generation of year-end vendor 1099 files and reports. Qualifications Bachelor's degree in Computer Science, Information Technology, or related field, or the equivalent combination of education, training, and experience Advanced experience with Oracle Applications particularly Oracle Cloud Fusion Financials (General Ledger, Accounts Payable, Expense Management, Fixed Asset, Project Costing, and Cash Management) and Oracle Integration Cloud, and Cloud Infrastructure/Solutions Advanced experience in developing, modifying, and deploying BI Publisher Reports and OTBI (Oracle Transactional Business Intelligence) reports Advanced experience in Java, J2EE, and ADF based systems development Experience with integration development using Oracle Middleware solutions such SOA suite/ Fusion Middleware Experience with Oracle Cloud Data Conversion Knowledge in cloud migration and engineering cloud centric environments Experience in SQL (Oracle or MS SQL) Experience with Agile software development practices including SAFe, Scrum, JIRA, Peer Review, Git and CI/CD The position will require technical development skills and have thorough understanding of the development lifecycle, including software design, development, testing, and support of web applications Knowledge of discipline engineering principles, practices, and theories, and methods to identify and solve the highest complex problems and perform sophisticated analyses Knowledge and understanding of the end-to-end IT process, including architecture, design & engineering, implementation, and operations Troubleshooting skills and ability to identify root causes of issues and provide solutions Self-motivated and proactive, able to learn quickly and apply new concepts, tools and applications Demonstrated ability to solve complex system/integration problems through innovative solutions Advanced problem solving, collaboration, critical thinking, team building, and presentation skills Advanced skill applying innovative approaches to solve technical design issues Expert verbal, interpersonal and written communication skills Desired Qualifications Master's degree in Computer Science, Information Technology, or related field Some experience with private, public and hybrid cloud infrastructure (e.g., Azure, AWS, Google Cloud, etc.) Knowledge and/or understanding of Finance or Accounting Knowledge of banking/financial industry trends, products, and services Knowledge of Navy Federal products, services, programs, policies, and procedures Technical certifications for Oracle Cloud Applications and Oracle Cloud Infrastructure Hours: Monday - Friday, 8:00AM - 4:30PM Locations: 820 Follin Lane, Vienna, VA 22180 | 5510 Heritage Oaks Drive, Pensacola, FL 32526

Travel: Up to 100% Number of Openings: 1 Achieve more in your career with the nation's leading specialty concrete contractor. At Baker Construction, you'll be part of a team that prioritizes people, invests in their development, and offers unparalleled opportunities for professional growth. In this role, you'll be integral to building the future of our country and our company. You'll collaborate across diverse teams, have a hand in significant projects, and dive headfirst into complex challenges with the best in the industry. If you are driven to do more and have the grit to follow through, you'll have everything you need to define your career on your terms. Make a meaningful impact with a team that values ambition and rewards initiative. Apply today and be more with Baker. Summary The Field Project Engineer supports field activities and spends a majority of time working with the craft workers. Activities include support of layout, daily resource requirements, lay-down yard management, daily costs, time and quantities, logs, and daily and weekly look-ahead schedules, etc. Roles and Responsibilities The Field Project Engineer will possess competency in the following areas in other to perform his/her role in a safe, productive, and effective manner. Note that the areas listed are intended to describe the general nature and level of work being performed by co-workers assigned to this role. They are not intended to be an exhaustive list of all the responsibilities, skills, efforts, or working conditions associated with this job. * Contributes to Project Productivity * Supports Superintendent on Construction of Project * Supports Project Engineering and QA/QC Activities * Supports Project Safety * Ensures a Safe Work Environment * Participates in Training/Certifications Requirements * Bachelor's Degree from an accredited college or university; or 4 years of construction related experience and/or training; or equivalent combination of education and experience At Baker Construction, we welcome those who are driven to make things happen. Your tenacity will be rewarded with great pay, excellent benefits, and opportunities to make your mark. This is an opportunity to own your future while working alongside co-workers who are united in our purpose to build better structures and better lives. Go further with an industry leader that puts people first, honors its word, and has the grit to achieve greatness. Baker is an EOE Disability/Veterans Employer. Applicants with physical and/or mental disabilities who require a reasonable accommodation for any or part of the application process may make their requests known by emailing ************************ or calling ************** and asking for HR. Nearest Major Market: Daphne Nearest Secondary Market: Fairhope

Job DescriptionSalary: Are you self-motived with a drive to succeed? Do you enjoy people but function well independently? Are you someone who thrives when multi-tasking while pursuing excellence? Do you have a natural sense of urgency but care about the details, and enjoy following established processes and procedures? Do you enjoy working outdoors and don't care to ride a desk for eight hours a day. Are you looking for an exciting opportunity to plant, develop and grow a career with a thriving company, in the construction space? If the answer to any or all of these is yes than you can STOP LOOKING because BECI is the COMPANY YOU'VE BEEN SEARCHING FOR! We are currently seeking a Project Manager or Project Engineer, to join our team in the Pensacola, FL market. This position is considered local however, out of market travel will be required on occasion to train and to support other branches/markets. Previous Building Enclosure experience is a plus but, if you don't have that, don't worry, we're really good at teaching and...WE WILL TRAIN YOU! STEPS FOR APPLYING 1 - Complete the application through the online portal and submit your resume. 2 - Complete the Culture Index Survey via the link you receive in our response email. Responsibilities Assisting with troubleshooting building envelope issues. Going onsite to construction sites to provide support and quality analysis. Producing reports based on investigations. Assisting with the preparation of construction specifications. Providing technical support to staff, as required. Attending trade shows, seminars and educational programs to keep abreast of industry trends and ensure continued professional development. Qualifications Bachelors degree from an accredited college in a related discipline (engineering/construction management) or equivalent experience in the construction industry. IIBEC credentials (RRC, RRO, RWC, or REWC), or EIT certificate a plus, but not required. Compensation This position is salary-based with the potential for quarterly performance-based bonuses. The salary is competitive and generally exceeds the national average. Benefits Medical, Dental and Vision insurance, as well as, an HRA card for medical, dental, and vision expenses 401K plan Paid holidays, as well as, Paid personal time off (PTO starting at 117 hours pro-rated per annual) Relocation reimbursements Vehicle allowance or travel reimbursement Continuing education reimbursement Do not forget the survey: To be considered for this position, along with submitting your resume, please complete the Culture Index survey by either clicking or copying this link (****************************************** and pasting it in a web browser. The survey should take you no more than 10 minutes to complete. About Us: BECI provides purposeful and attentive building envelope consulting services to help optimize all six sides of your building. We are client-focused, using our teams extensive knowledge to help you set and meet your goals. We filter everything we do through the lens of our 4 core values (People, Knowledge, Servant, and Balance) so that we can retire our customers and employees. We do this through our BECI Sensible ApproachTM utilizing our three Cs of Context, Consistency, and Clarity. This methodology enables the fastest-reporting turnaround time and most competitive pricing.

Thompson Engineering has an immediate opening for a Transportation Project Engineer to join our growing team in one of our offices located in Mobile, Daphne or Orange Beach, AL. Enhance your engineering career with a company that aspires to be the firm of choice by driving success with our clients, employees, and communities. At Thompson Engineering, we offer a wide range of services to a growing list of clients across multiple markets throughout the Southeast. At Thompson, we aim to make the communities we live and work in better by providing our services in alignment with our core values: integrity, safety, performance, ownership, teamwork, innovation & entrepreneurial spirit, and professionalism. We have a work environment and company culture that allows self-driven engineers to gain valuable experiences and develop technical proficiencies needed for a successful and rewarding career. As an employee-owned company, we also seek to offer competitive compensation packages and employee benefits. Description This position is for an aspiring and motivated engineer with 5-10 years' of roadway design experience on local and/or state transportation projects and is seeking opportunities for growth into a project engineer position. The ideal candidate will exhibit qualities needed to assume a lead design role on road and bridge projects. This position requires knowledge of all aspects of geometric roadway and roadside design needed for the development of roadway plans for state and local clients in Alabama. Immediate benefits of this position include offering interested candidates the opportunity to develop client relationships and represent the company in professional trade organizations. Long-term benefits of this position may include growth opportunities into a senior management position overseeing and developing other engineers and managing multiple projects. We have a multi-disciplined team of engineers, surveyors, and environmental scientists which this position will coordinate and communicate with regularly. Your Role As a transportation project engineer, you will work closely with team leaders and support staff to perform a variety of tasks needed to produce quality designs and plans on road and bridge projects throughout the Southeast. Regular duties will include the following: * Preparing preliminary design studies, project planning, and related activities that lead to the design of a project. * Preparing project specifications, cost and material estimates, reports, and engineering studies. * Preparing design, detail, and layout drawings and design sketches. * Planning and adhering to task and submittal schedules and project budgets to ensure timely and cost-effective completion of projects * Following company policies and procedures regarding safety and quality. Minimum Requirements * A bachelor's degree in civil engineering * 5-10 years' experience * Alabama PE, or ability to obtain such, required * Proven experience with ALDOT design methods, plan preparation, standards and specifications required * Proficient with MicroStation, InRoads, and other related Bentley products * Knowledge of OpenRoads is desired * Knowledge of drainage design and applicable software is a must * Ability to manage client expectations, project schedules and budgets * Ability to mentor and train entry-level engineers * Ability to communicate clearly, both oral and written * Ability to work in various work environments, both outside in the field and in an office for extended periods of time This position offers a competitive compensation package, including a sign-on and/or relocation bonus to qualified candidates. Baldwin County is a fast-growing county with 4 of the 5 fastest growing cities in the state and a diverse range of communities to call home. Physical Requirements * Must be willing to work flexible schedules and overtime as needed by the department needs. * Must be able to operate a computer and sit for long periods of time. * Ability to wear appropriate PPE for hazardous materials. * Must have a valid driver's license and be able to drive company vehicle if needed. About Us Thompson Engineering was formed in 1953 to provide quality assurance for construction projects related to industrial, infrastructure, and community development. As a drilling, materials testing, construction inspection, and chemistry laboratory firm, we supported the engineering and construction industry. Our early years were building blocks that allowed us to get our feet wet - literally - performing services along the Gulf Coast's rivers, bayous, and streams. Today, Thompson Engineering is known for leadership on projects defining skylines, coastlines, and transportation lines. We support clients in the industrial, commercial, transportation, federal, and municipal markets. While we are still one of the first companies on project sites conducting environmental assessments, land surveys, and geotechnical studies, our design teams are close behind. We now deliver cutting-edge solutions to complex infrastructure and building requirements. And our project management and construction management services mean we are often one of the last teams to leave. From start to finish, we are a proven leader in the planning, design, and construction of major transportation, economic development, and waterfront projects across the Southeast. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus US Manufacturing Facility is looking for a Manufacturing Engineer I to join our A320 Engineering Department based in Mobile, AL. Job Summary: Responsible for the manufacturing assessment of non-conformities, late changes to support production, and supporting and identifying continuous improvement opportunities for the manufacturing process. Responds to technical questions and explains work orders/drawings, especially for aircraft mechanical related items. Establishes and maintains effective communications with FAL production and serves as interface to the on site back office for work order adaptation. Meet the team: Our Engineers at the Airbus U.S. Manufacturing facility take our aircraft from concept to customer delivery - working with production teams on every aspect of assembly from managing technical information, quality control, maintenance tasks and health & safety - along flowlines and flightlines. Join our team and watch our aircraft come to life. Your working environment: Nearby on 'Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How we care for you: * Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP"). * Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. * Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. * Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Primary Responsibilities: Handle Non-Conformities: 50% * Create specific work orders for FAL rework (Cabin, Systems, Electrics, or Structures by Station) , establish/verify the technical content of non-conformities, and validate in documentation. * Provide technical support to production on all issues including oversight of directed changes. * Responsible for incorporating implicit knowledge into work instructions and refine them in terms of language, level of detail and regulation assignment to ensure operations has correct information for aircraft build. * Initiate availability of replacement parts, jigs, and tools required for work. Continuous Improvement: 50% * Manage continuous improvement measures with reoccurring non-conformities in cooperation with quality. * Participate as an active team member to support ME activities in the FAL. Additional Responsibilities: * Support completion of the routing verification process (RVP) for new or updated processes as required. * Participate as an active team member learning and following dedicated training plans from current team members. including providing orientation support to new colleagues and trainees. * Additional projects as assigned * Other duties as assigned. Your boarding pass: * A bachelor's degree in Industrial Engineering, Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or Engineering Technology or equivalent years of experience is required. * Must have a minimum of 0-3 years of experience in Aerospace, preferably in an Aerospace Final Assembly Line. * Travel Required: 5% Domestic and International. Required: * Knowledge of the principles, practices, methods, and tools used in manufacturing engineering. * Knowledge of supply chain management and quality system management. * Knowledge about non-conformities and design query notes. Preferred * Knowledge of Airbus Industries mechanical process & methods. * Knowledge of Airbus IT-Tools (Zamiz, TAKSY, DocMaster, ECM). * Knowledge of common applications such as SAP/R3 (Module PP/PM). * Knowledge about aircraft structure installation. * Knowledge of rules for aircraft design and manufacturing. * Knowledge of health, safety and environmental regulations and practice. Required: * Have the ability to establish and maintain a good relationship with all internal customers. * Have the ability to work in an international team. * Must possess excellent communication and presentation skills, both verbal and written. * Must be able to present clear and concise briefings and reports to customers and executives. Preferred: * Fluency in German or French * Required: Microsoft Word, PowerPoint, and Excel, Google Suite (Gmail, Sheets, Docs) * Preferred: * Knowledge of Airbus Industries electrical processes & methods. * Knowledge of Airbus IT-Tools (Airina, TAKSY, DOcMaster). * Knowledge of common applications such as SAP/R3 (Module PP/PM). * Candidates should be able to work autonomously on their own scope of work under normal circumstances, and be prepared to request support and escalate appropriately in abnormal situations. * Candidate should be able to make decisions related to their own scope of work in a predefined context. * Ability to work on 1st, 2nd, and potentially 3rd shift schedules. * Support production needs for completion of aircraft milestones. * Communicate with international colleagues to solve problems as they arise. * Communication & Planning with multifunctional teams across the organization. * Primary internal audience - Manufacturing Engineering, Production, Quality & Logistics. Physical Requirements: * Onsite or remote: 100% Onsite. * Vision: Able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. * Hearing: Able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. * Speaking: Able to speak in conversations and meetings, deliver information and participate in communications. * Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. * Carrying: Able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Lifting: Able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. * Pushing / Pulling: Able to push and pull small office furniture and some equipment and tools. * Sitting: Able to sit for long periods of time in meetings, working on the computer. * Squatting / Kneeling: Able to squat or kneel to retrieve or replace items stored on low shelving. * Standing: Able to stand for discussions in offices or on the production floor. * Travel: Able to travel independently and at short notice, potentially internationally. * Walking (include routine walking such as to a shared printer to retrieve documents): Able to walk through office and production areas including uneven surfaces. * Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site. * Administrative position only PPE required: Steel-toed shoes are required for all shop floor visits, appropriate hearing/eye protection may also be required when visiting the shop floor. Equal Opportunity: All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status As a leader in our field, Airbus provides relocation assistance for qualified positions and a comprehensive compensation and benefits package. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. NOTE: Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: On-site Job Family: Manufacturing Engineering * ----- * ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.