Project engineer jobs in Pharr, TX - 38 jobs

**Project Engineer - Packaging Solutions North America (PSNA) Engineering** ** Project Engineer **Pay Rate: $115,000 - $134,000** _Multiple factors, including Individual experience, skills and abilities will determine where an employee is ultimately placed in the pay range._ **Category/Shift:** Salaried Full-Time **Physical Location:** Memphis TN. Does not require relocation to Memphis. Must live near an US airport as this position requires approximately 50% travel. **The Job You Will Perform:** + Responsible for engineering and managing the installation of equipment within corrugated manufacturing facilities. + Directly responsible to assure all capital and repair projects assigned are installed as per the project scope, schedule, cost estimate and budget, and with minimum plant production interference. + Reports to the Project Engineer Lead in PSNA Engineering. The PL of this role may vary (PL 14, 15 or 16) according to candidate skill set and experience. + Lead the project management of multiple, concurrent projects involving installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Project management responsibilities include organizing/planning, scoping & bidding, coordination of schedule, and managing the project to fruition. + Perform detailed engineering for installation of corrugated manufacturing equipment and/or plant infrastructure improvements. + Travel to sites as needed to manage major and minor projects & equipment installations. + Act as the subject matter expert and discussion partner to Packaging Solutions North America (PSNA) facilities on all aspects of the corrugated manufacturing process, and project implementation. **The Qualifications, Skills and Knowledge You Will Bring:** + BS degree or equivalent experience in engineering or related business discipline. + 5+ years corrugated box industry experience including a detailed understanding of corrugated equipment, the corrugating process and applicable OSHA health & safety policies/laws. + Requires understanding of engineering process and the mechanical, electrical, and scheduling/organizational requirements for corrugated equipment installations. + Proficiency in Microsoft Office Suite, including Microsoft Project. + Proficiency with AutoCAD software to create, view and modify drawings for comparative evaluation and final project construction/installation; utilize AutoCAD software to create and modify plant layouts, equipment layouts & foundation drawings for contractor bid packages. + Advanced project management skills with experience managing multiple, current, major and minor engineering projects. + Ability to communicate technical concepts effectively to all levels of company management. + Knowledge and understanding of contractor services - mechanical, electrical, and structural. + Organizing + Time Management + Priority Setting + Action Oriented + Decision Quality + Problem Solving + Functional /Technical **Job Identification** 1082326

Posillico is Building for Generations. Posillico is a multi-disciplined and diversified construction company. Along with our Civil /foundation group, Posillico's business units include Wastewater Division, Environmental Division, Utilities Division, Drilling Division, Paving Division, Posillico Consulting LLC, Posillico Developmental LLC, and Posillico Materials, LLC. These companies give Posillico the unequalled, leveraged experience required to complete complex structural and geotechnical projects successfully. Posillico empowers a “people first, think safety” culture throughout our organization. This “people first” culture has helped to promote and maintain an excellent record of accomplishment. Posillico has an exceptional safety program coupled with proactive employees throughout its management and union staff. We offer all employees an excellent opportunity to be part of our developing business at Posillico, as we set the standards for excellence in the construction industry with our integrated solutions. Our company mission is to complete all our projects safely, on time, on target and on budget while having a positive impact in the community. Follow us at… Facebook Instagram LinkedIn Responsibilities POSITION SUMMARY: The Project Engineer assists the Project Manager/ Executive by tracking and maintaining records that are associated with submittals, costs, deliveries and payroll at the job site. The Project Engineer is also responsible for tracking and maintaining all safety communications, manuals and records. Safety: Prepare and give weekly Toolbox Talks, Daily Safety Huddles and maintain records. Maintain a file for One Call Center requests to ensure no utilities are damaged during construction activities. Maintain a retrievable filing system for the Hazardous Communication Program - MSDS. Maintain the Project Safety Manual, make periodic jobsite safety inspections and record/file all findings. Maintain records of site safety inspections and track all injuries that occurred on the project. Payments: Perform daily quantity review with Superintendent and Job Foreman. Enter daily quantities into system and file daily sheets. Track completion of work on project plans. Perform monthly review of estimates with job Superintendent/ Project Manager. Maintain a file, tracking all extra work. Notify Project Manager or Division Manager of anticipated overruns/underruns. Submit monthly estimated with subcontractor payment sheets to Accounting upon approval from the owner. Request a copy of Final Estimate with each monthly estimate and send to Area Manager - State DOT projects only. Review and approve material and supplier invoices for the project on a regular basis. Daily Logs: Maintain general correspondence file with correspondence log. Maintain Shop Drawing Log. Maintain Subcontractor Daily Log. Maintain Delivery Log. Accurately track asphalt and other major materials that are delivered verses the quantity paid. Develop and update Submittal Log. Certified Payroll, EEO, Trainee Reports: Enter daily payroll information by specific task and assist in productivity tracking. Track all subcontractors that worked on the project for the month utilizing the Subcontractor Daily Log. Submit copies of the Sub. Log to Payroll monthly and notify Area Managers of delays. Miscellaneous: Maintain job records. Track job codes using Phase Code System. Maintain the Request for Information (RFI) to the owner. Assist in purchase of job materials to ensure the proper quantities are delivered. Review project plans and assist in ensuring work is completed properly. Develop project look-ahead schedules. Review project specifications and prepare/track submittal packages accordingly. Review subcontractor submittal packages for accuracy. Qualifications QUALIFICATIONS: B.S. Degree in Engineering with 2 to 3 years of related experience. Experience in Heavy Construction (site-work, roads or environmental). Must be capable of meeting deadlines, self-motivated, detail oriented, excellent interpersonal skills and have excellent follow-through capability. Verbal and written communication skills are essential to this position. Ability to perform effectively in a fast-paced environment; able to accurately process written documents, perform duties in a timely manner, be highly organized and able to interface; communicate effectively with company, clients and field personnel at all levels. Location: Mission, TX and surrounding areas Equal Employment Opportunity Posillico Civil, Inc. is committed to maintaining a working environment that promotes teamwork and that is free of any and all forms of unlawful discrimination and harassment. Accordingly, all of its employment-related activities will be administered without regard to race, color, religion, sex, national origin, age, disability, veteran and military status, marital status, personal appearance, sexual orientation, family responsibilities, domestic violence victim status, matriculation, political affiliation, genetic information, predisposing genetic characteristics or other legally protected personal characteristic. #LI-Onsite Posillico Civil, Inc. together with its parent, subsidiaries, affiliates, partners and joint ventures (collectively “Posillico”) do not accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to Posillico or an employee of Posillico, by mail, electronically, or otherwise will be considered property of Posillico. Posillico will not pay a fee for any placement resulting from the receipt of an unsolicited resume. Posillico will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. As a condition for payment, an Agency shall have an agreement signed by an authorized Posillico representative. Verbal or written communications from any employee of Posillico shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be the property of Posillico.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Job Description Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: Manufacturing Engineering Internship: In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: * Learn and understand state-of-the-art methods of manufacturing, * Support manufacturing and repair processes for component hardware and/or overall engine assembly, * Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls * Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives * Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment * Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: * Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding * Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) * Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations * Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: * Aeronautical/Aerospace Engineering * Ceramic Engineering * Chemical Engineering * Civil Engineering * Computer Engineering * Computer Science * Electrical Engineering / Electrical & Computer Engineering * Engineering Technology (various) * Fiber/Polymer Science * Industrial Engineering * Manufacturing Engineering * Materials Science/Engineering * Mechanical Engineering * Systems Engineering * Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: * Humble: respectful, receptive, agile, eager to learn * Transparent: shares critical information, speaks with honesty, contributes constructively * Focused: quick learner, strategically prioritizes work, committed, and takes initiative * Leadership ability: strong communicator, decision-maker, collaborative teamwork * Problem solver: analytical-minded, challenges existing processes, critical thinker * Comfortable working in a fast-paced shop floor environment around various machine tools and equipment * Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering * Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

We are seeking an experienced Estimator / Project Manager with a strong background in commercial construction. This individual will be responsible for preparing accurate estimates, managing awarded projects, coordinating with field leadership, and ensuring smooth communication with clients, vendors, and subcontractors. The position requires a solid understanding of construction processes, cost control, job sequencing, and contract requirements. Key ResponsibilitiesEstimating & Preconstruction Reviews plans, specifications, addendums, and project documents to produce detailed and accurate estimates. Performs material take-offs, evaluates labor requirements, and analyzes project risks. Prepares cost proposals, budgets, and pricing for change orders and revisions. Coordinates with suppliers and subcontractors to obtain competitive quotes and verify scope coverage. Provides value-engineering options when appropriate. Project Management Oversees the full project lifecycle from award through project closeout. Develops project schedules, manpower projections, and material procurement plans. Works closely with superintendents, foremen, and field teams to ensure job progress aligns with contractual scope, schedule, and budget. Prepares and manages RFIs, submittals, change orders, and progress reports. Conducts jobsite visits to monitor production, quality, and safety practices. Tracks project costs and participates in monthly billing and forecasting meetings. Maintains organized documentation to reduce risk and ensure compliance with customer requirements. Client & Vendor Relations Serves as a main point of contact for project owners, general contractors, architects, and subcontractors. Builds strong relationships by communicating effectively and resolving issues promptly. Participates in project meetings, progress updates, and coordination discussions. QualificationsEducation Bachelor's degree in Construction Management, Engineering, Architecture, or related field preferred. Equivalent industry experience considered. Experience Minimum 3-5 years of estimating and/or project management experience in commercial construction. Experience working with drywall, interiors, framing, or general contracting strongly preferred. Proficiency with estimating and project management tools (Bluebeam, PlanGrid, Procore, On-Screen Takeoff, Quick Bid, or similar). Skills Strong grasp of construction means, methods, and sequencing. Excellent communication and negotiation abilities. Able to read and interpret construction drawings, specifications, and technical documents. Strong analytical, organizational, and problem-solving skills. Proficient in Microsoft Office Suite (Excel, Outlook, Word).

Full-time Description Since 1980, CobbFendley has been committed to providing innovative engineering and surveying solutions with the goal of bettering communities. Our multi-discipline approach allows for the efficient completion of projects through experienced staff who focus on client communication. We are always seeking talented and qualified professionals to enhance our ability to provide clients with exceptional service. Are you ready to Join Our Block and advance your career? At CobbFendley, people are our most valued resource. We offer a(n): New Hire Program // We understand changing jobs can be intimidating, CobbFendley has established a program geared specifically to the successful onboarding and integration of new hires into the firm Development Opportunities // Professional and personal growth through innovative in-house training and collaborative resources Compensation + Benefits // Competitive compensation package with comprehensive benefits including 401(k) Matching and Profit-sharing Contributions; Employee Stock Ownership Plan (ESOP); Health, Vision, and Dental Insurance; Short-Term and Long-Term Disability Insurance; Employer Funded and Voluntary Life Insurance; Tuition Reimbursement; and Continuing Education Programs Paid Parental Leave // FMLA-eligible employees will receive fully paid leave in the amounts of eight (8) weeks for maternity cases and two (2) weeks for paternity or adoptions cases Winter Holiday // Extended office closure from December 25 through January 1 to relax and enjoy the holidays Community Engagement // CobbFendley Cares focuses on STEM Education, Hunger Relief, and Sustainable Solutions CobbFendley is seeking an experienced Project Manager in our McAllen, Texas office. Requirements EDUCATION, REGISTRATION, CERTIFICATION Engineering: Bachelor's degree in a civil or related engineering discipline in which the degree would meet state eligibility requirements for licensing, required. Engineering: Registration and designation as a Professional Engineer (PE), required. EXPERIENCE + KNOWLEDGE SKILLS ABILITY (KSA) Intermediate // Developing skills with some practical experience; able to perform tasks with occasional assistance. 6+ years of professional experience within a discipline, including a minimum of 1 year as a Deputy Project Manager. Knowledge of project management methodologies and lifecycle, industry standards, city, state, and federal rules and regulations, tools and software (i.e., Microsoft suite, Vantagepoint, Smartsheet, etc.), and quality management required. Skills including leadership, communication, time, risk, quality and financial management, negotiation, and problem-solving required. Ability to think strategically, adapt to competing priorities, execute and delegate, communicate and collaborate, and perform tasks with a high level of accuracy required. COMPLEXITY + DECISION-MAKING AUTHORITY 1. Responsible for the success of projects of small to moderate scope. *Must be listed as a Project Manager in Vantagepoint but may be responsible for direct invoicing and billing to clients. 2. Independently performs most assignments, clear understanding of project flow with field experience, and escalates project decisions to supervisor. RESPONSIBILITIES 1. Financial Management // a. Utilize weekly budget report and project report to monitor progress on projects and review of accounts receivable (A/R) report. b. Prepare scope of work (SOW), Levels of Effort (LOE) and schedules for projects. Identify out of scope requests and prepare proposals for additional authorizations. c. Responsible for collection of invoices from clients including escalations for past due invoices. 2. Corporate Compliance + Risk Assessment // a. Ensure completion of the contract and subcontract review process through the Contracts Department and appropriate filing and adhere to jurisdictional requirements and company-established signature matrix protocol. b. Cursory review of the initial contract terms and conditions and coordinate as necessary with client for modifications to the contract. c. General understanding of contract payment terms and company-wide fees and negotiation strategies. d. Follow company-established QA/QC process including project kick off and project safety plans. 3. Communication + Collaboration // a. Held accountable for communications and collaboration such as ensuring that messages and information are not only received but understood and acted upon appropriately within the department, other disciplines and regions, and corporate resources. b. Able to articulate project requirements timelines, and deliverables, and corporate directives, in a concise and clear manner. c. Responsible for the completion of meeting minutes and documentation to respective parties. d. Comply with marketing requests including but not limited to input for requests for qualifications (RFQ) and proposals and maintaining updated resumes, etc. 4. Client + Internal Satisfaction // a. Adhere to project schedules set by the client and keep clients informed of any potential delays and work with the supervisor for mitigation plans. b. Be responsive and accessible and address problems and concerns timely and follow up to ensure satisfaction post-resolution. 5. People Development // a. Provide feedback on staff performance to management periodically including for annual evaluation. b. Assist with recruiting project team members. c. May give direction to support staff assigned to project(s) by supervisor and senior project manager(s). 6. Technical // a. Work on projects that include the following scopes: i. Drainage Area Maps ii. Closed Storm System Hydraulics iii. Roadway design, Alignments iv. Sanitary Sewer Design, Force Mains v. Waterline Design vi. Water & Wastewater Design of Plant vii. Project Manual Construction Contract & Specs viii. Permits & Regulatory ix. Technical Report Writing x. Selecting Pumps xi. Lift Station Design xii. Developmental Plan Review xiii. Construction Admin, Limited Inspection xiv. Constructability Review xv. Coordinating Multiple Discipline Design xvi. Construction Phasing xvii. ADA Regulation xviii. Program Manager xix. City of Engineering Services xx. Capital Improvement Plans xxi. Impact Fee b. Utilize the following software applications to complete project work: i. Microsoft Project ii. Bluebeam COBBFENDLEY CHARACTERISTICS We Collaborate // with a professional attitude making communication a priority. We Commit // to maintaining a safe and inclusive work environment, with a focus on accountability. We Build Communities // by fulfilling our responsibilities with integrity that is consistent with industry standards. PHYSICAL/COGNITIVE REQUIREMENTS + ENVIRONMENTAL FACTORS Most work is performed in a professional office environment. Some trips to client offices and outdoor environments for observations will be required. Seated and Standing Position. Extended periods of sitting and standing in an upright position at a workstation. Mobility. Movement within the office and job sites, including navigating between floors, workstations, and outdoor environments with potential for uneven surfaces. Neck Movement. Forward flexion, extension, or lateral rotation of the head and neck while using multiple computer screens. Repetitive Motion. Repetitive finger movements for operating a computer mouse and typing on a keyboard. Arm Movement. Extending hands and arms in various directions, such as overhead, below the waist, forward, or laterally. Object Handling. Raising or lowering objects from one level to another and transporting objects by holding them in the hands, arms, or over the shoulder. Cognitive Requirements. Selective attention, oral comprehension, oral expression, speech recognition, speech clarity, written comprehension, written expression, problem sensitivity, deductive reasoning, inductive reasoning, number facility, information ordering, category flexibility, flexibility of closure, fluency of ideas, and originality. Office Conditions. Includes extensive use of electronic devices such as computers, printers, copiers, scanners, plotters, and telephones. Additionally, tasks may involve the use of cutting tools and equipment like rotary paper cutters and plotting devices. Outdoor Conditions. Includes walking and climbing on uneven surfaces, confined spaces, and exposure to extreme weather conditions (heat and freezing temperatures). Potential exposure to high noise levels and various allergens, including poison ivy, sumac, dust, pollen, and cedar. Potential exposure to wildlife hazards such as animals, insects, and plants. Safety and Equipment Use. Regular use of personal protective equipment (PPE) is required, along with use of hand and power tools. Driving and Vehicle Use. May involve driving large pick-up trucks with attached trailers, potentially operating watercraft, and for extended periods of time. EXPECTED WORK HOURS This is a full-time position, generally 40 hours per week, however, hours may fluctuate depending on department needs including the use of overtime. CobbFendley's standard operating hours are Monday through Friday, 7:30 AM to 4:30 PM CST. Generally, employees receive a 1-hour unpaid lunch break free of duty. Please note, operating hours and lunch hours may differ based on project workload, primarily for field staff. WORK LOCATION FLEXIBILTY This position is eligible for a hybrid schedule once the training period is complete as established by the department. EQUAL EMPLOYMENT OPPORTUNITY Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. EEO is the Law (English) EEO is the Law (Spanish) EEO is the Law - Poster Supplement MISCELLANEOUS Pre-Employment Screenings. All offers of employment at CobbFendley are contingent upon the prospective employee passing a drug screening, physical exam (if applicable), and various background verifications (including but not limited to 10-year history of the county, state, federal, and a 5-year history of motor vehicle records). CobbFendley complies with all applicable state and federal laws regarding said screenings. Unless and only to the extent state or federal law limits CobbFendley's drug-testing requirements for initial hiring, all candidates for employment are subject to pre-employment drug screening verification which may include a panel drug test for use of marijuana and other substances that may be lawful under state law but unlawful under federal law. A positive result may lead to disqualification of candidacy or termination from employment to the extent permitted by law. CobbFendley reserves all rights with respect to its drug-testing, other pre-employment screenings, and workplace policies and procedures. External Recruiting Agencies. CobbFendley does not and will not accept unsolicited resumes under any circumstances from independent recruiters, recruiting agencies, or similar entities. Recruiting activity on behalf of a candidate does NOT constitute CobbFendley's acceptance of terms and conditions without prior contractual agreements signed by authorized CobbFendley personnel. Unsolicited resumes through any channels including cold calling, emails, applications, social media messaging, etc., will not be reviewed. Work Authorization + Sponsorship. Cobb, Fendley & Associates, Inc. participates in E-Verify. E-Verify is an Internet-based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA). The E-Verify system uses federal databases to rapidly validate individual identities and work eligibility from the information gathered in the Form I-9. CobbFendley will not sponsor applications of work visas. We understand that this could affect your decision to apply with these conditions in mind. Applicant Accommodations. Consistent with the Americans with Disabilities Act (ADA) it is the policy of CobbFendley to provide reasonable accommodation when requested by a qualified applicant or candidate with a disability, unless such accommodation would cause an undue hardship for the Company. The policy regarding requests for reasonable accommodation applies to all aspects of the hiring process. If reasonable accommodation is needed, please contact the HR Department at ************ or ******************. Drug-Free Workplace Conditions Medication Disclosure: Employees and job applicants shall receive notice of the most common medications, either by brand name, common name, or chemical name, that may alter or affect a drug test. A list of such medications shall be developed by the Agency for Health Care Administration. Contesting Positive Results: An employee or job applicant who receives a positive confirmed drug test result may contest or explain the result to the employer within 14 days after written notification of the positive test result. Responsibility to Notify the Laboratory: The employee or job applicant has the responsibility to notify the testing laboratory of any administrative or civil actions brought pursuant to this section. List of Drugs for Testing: A list of all drugs for which the employer will test can be supplied upon request, described by brand names or common names, as applicable, as well as by chemical names. Right to Consult the Testing Laboratory: Employees and job applicants are notified of their right to consult the testing laboratory for technical information regarding prescription and nonprescription medication.

ABOUT NEXTDECADE CORPORATION NextDecade is committed to providing the world access to reliable, lower-carbon energy. We are focused on delivering secure and cost-effective energy through the safe and efficient development and operation of natural gas liquefaction capacity at Rio Grande LNG. Through our subsidiaries, we are developing and constructing the Rio Grande LNG natural gas liquefaction and export facility near Brownsville, Texas, with approximately 48 MTPA of potential liquefaction capacity currently under construction or in development, sufficient space at the site for up to 10 liquefaction trains, and a potential carbon capture and storage project. NextDecade's common stock is listed on the Nasdaq Stock Market under the symbol “NEXT.” NextDecade is headquartered in Houston, Texas. For more information, please visit ******************** SUMMARY OF THE ROLE Facility Risk Engineers support safe operations by analyzing operational risks related to the ongoing operations of the LNG trains. They assist Production Shift Managers and HSSE teams in determining practicable short-term mitigations to maintain facility operations during barrier impairments. The role encompasses short- and medium-term risk management, including conducting risk assessments, developing mitigation plans, and ensuring compliance with NextDecade RGLNG operational and cumulative risk procedures and applicable regulations. Facility Risk Engineers and embedded in the Production Shift teams and collaborate with diverse stakeholders across Process safety, Maintenance, Engineering, HSSE, and may interface with contractors and vendors. This position is located in Brownsville, TX. This is a shift-based position and requires flexibility to work days, nights, weekends, and holidays as scheduled. Check out our RGV Spotlight Video to learn more about Brownsville and the Rio Grande Valley!KEY RESPONSIBILITIES: Safety Leadership and Culture: Instill a strong process and personal safety awareness culture by promoting the Facility Safety Case, ensuring PTW compliance, and conducting continual work activity safety analyses. Champion Process Safety Management (PSM) fundamentals for the Production shift team and drive continuous improvement in Quality and HSSE awareness. Risk Assessment and Mitigation: Coordinate and facilitate risk assessments for: SIMOPS and High-risk work permits, deviations from Standard Operating Procedures, barrier impairment, deferral of Safety Critical Equipment maintenance, inhibits and overrides, temporary work instructions and emergency MOC's, and other abnormal situations as required. Ensure risk assessment meetings meet competency requirements and obtain appropriate approvals. support the Permit to Work process by reviewing permit risk assessments and isolation schemes for adequate mitigations. Ensure SIMOPs is assessed during the Yesterday/Today/Tomorrow work alignment meeting. Operational Oversight: Monitor implementation of operational controls identified in risk assessments. Review daily work activities, highlighting SIMOPS and high-risk tasks during shift pre-start meetings. Conduct field walks and participate in toolbox talks to verify compliance with permit risk mitigations. Barrier and Integrity Management: Work closely with barrier owners to manage impaired Safety Critical Elements (SCE) and deferral processes. Maintain data visualization inputs for key integrity elements such as alarm management, inhibits/overrides, and leak/weeps/seeps. Compliance and Auditing: Regularly audit compliance with NextDecade standards, guidelines, and work practices, including: procedural compliance, leak/weeps/seeps management, inhibit and override processes, locked valve audits, alarm management and isolation management. Incident Management: Ensure information is captured from the shift team following HSSE, quality, and reliability incidents to support investigations. Training and Guidance: Provide training and guidance on risk assessment methodologies and best practices for production and maintenance shift teams. MINIMUM REQUIREMENTS: Bachelor's degree in engineering (Chemical, Mechanical, Electrical, Instrumentation, or a closely related discipline). 5 Years' Experience in the Oil & Gas, Chemical or Petrochemical Industries. Demonstrated experience and understanding of Risk Assessment processes and techniques. Ability to obtain Transportation Worker Identification Credentials (TWIC) Knowledge of Barrier Management and Bowties. Experience in working with KPI guidelines to track monthly requirements aligned to the NextDecade RGLNG annual business plans. This role is a shift-based position and requires flexibility to work days, nights, weekends, and holidays as scheduled. PREFERRED QUALIFICATIONS: 7 - 10 years' experience in leadership role(s) within risk assessment, safety management, or HSE within LNG, oil & gas, or petrochemical industries. Understanding and application of Process Safety Fundamental principles. Experience in LNG-specific hazards, cryogenic risks, and emergency response planning. Understanding of regulatory requirements (FERC, PHMSA, USCG, OSHA, API, ISO 31000, NFPA 59A, and LNG-specific regulations). Knowledge of Safety Cases. Job Site Work Environment · Must be able to wear all necessary PPE equipment to perform job functions. · Operates in a complex construction environment. · Exposure to indoor and outdoor weather conditions. · Not necessarily protected from weather and temperature changes. Possible exposure to hot, cold, wet, humid, or windy weather conditions. · Exposure to moving mechanical parts and electrical circuits. · Exposure to constant or intermittent sounds of a pitch level sufficient to cause marked distraction. · Routinely uses standard office and field communications equipment such as computers, phones, photocopiers w/scanner and fax, and radios. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to support individuals with ADA-recognized disabilities to perform the essential functions for the job.· Ability to drive to other Company work locations as required. · Ability to move throughout all areas of the facility, including being physically capable of traveling to a designed muster point during emergency situations. · Stand and/or sit continuously and perform job functions for a full shift. · The incumbent is required to have fully mechanical motion and usage of all extremities. · Physically able to walk, stand, bend, stoop, kneel, reach, twist, lift, push, pull, climb, balance, crouch, handle, and lift items weighing up to 20 lbs. without assistance. · Visual acuity corrected to perform job functions. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. · Must be able to clearly communicate with others via radio, phone, and verbal methods. · May be required to enter confined spaces. · May be required to work at elevated heights and access elevated structures without assistance. If you require accommodations during the application or interview process, please contact Human Resources at **************************. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. *In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. NEXTDECADE VALUES· Safety - We make safety a priority. Everything we do relies on the safety of our people and the communities around us.· Integrity - We do the right thing, and are open, ethical, and fair. We hold ourselves to the highest standards in all that we do.· Honesty - We value truth and honesty in ourselves and others. We honor our commitments and take responsibility for our actions.· Respect - We listen, and respect people, the environment, and the communities in which we live and work.· Transparency - Transparency builds trust. We promote open communication with our people, our customers, and all our stakeholders.· Diversity - We value diversity of experiences and thoughts. It takes people with different strengths and backgrounds to make our company succeed. NextDecade provides equal employment opportunities (EEO) to all applicants without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. NextDecade complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

The Construction Project Manager will be responsible for overseeing and managing all construction activities on USACE. They will work closely with the Project team to ensure that projects are completed on time, within budget, and meet the required quality standards. The Construction Superintendent will coordinate with subcontractors, suppliers, and other project stakeholders to ensure smooth execution of construction activities. They will also be responsible for maintaining a safe and productive work environment, adhering to all safety regulations and company policies. The ideal candidate will have strong leadership and communication skills, with the ability to effectively manage a team and resolve any issues that may arise. They must have a solid understanding of construction techniques, building codes, and regulations, as well as experience in managing complex construction projects. The Construction Superintendent should have a high attention to detail, with the ability to review and interpret construction drawings, specifications, and contracts. They must also be highly organized, able to prioritize tasks and manage multiple projects simultaneously. • Oversee and manage all construction activities on USACE projects • Work closely with the Project team to ensure projects are completed on time, within budget, and meet quality standards • Coordinate with subcontractors, suppliers, and other project stakeholders • Maintain a safe and productive work environment • Review and interpret construction drawings, specifications, and contracts • Resolve any issues or conflicts that arise during construction • Conduct regular site visits and inspections to ensure work is progressing according to plan • Generate progress reports and update project schedules as needed • Communicate regularly with project stakeholders to provide updates and address any concerns • Provide leadership and support to the construction team • Ensure compliance with all safety regulations and company policies Requirements Bachelor's degree in Construction Management, Engineering, or related field Minimum of 5 years of experience as a Construction Management Experience working on USACE projects Strong knowledge of construction techniques, building codes, and regulations Excellent leadership and communication skills Ability to effectively manage a team and resolve issues High attention to detail Ability to read and interpret construction drawings, specifications, and contracts Strong organizational and time management skills Proficient in Microsoft Office suite Valid driver's license Ability to pass a background check and drug screening The personnel need to be familiar with all USACE work, RMS use, P-6 scheduling etc. Benefits Competitive Salary, per diem, car allowance and Medical,Dental and Vision covered for contractor

Qualifications · Bachelor of Science degree in civil engineering from an ABET accredited college or university. · Professional Engineer (P.E.) designation in the State of Texas. · Project experience includes design and construction of water distribution systems, wastewater collection systems, stormwater systems, treatment plants, and pump/lift stations for municipal clients' districts and agencies. · Client relationship skills; including preparation and development of proposals and client management experience with a successful track record of delivering various engineering projects to the expectations of the client. · Extensive knowledge of design and construction practices for waterlines, storage tanks, pump stations, wastewater lines, lift stations and force mains · Demonstrated ability to manage projects and deliver on time and within budget. · Proven ability to effectively communicate, both oral and written skills · Proven ability to develop and maintain professional relationships with clients, municipal utility districts, public agency officials and community leaders. · Proven ability to lead a team of engineers and technical professionals. · Actively involved in professional associations and civic organizations Responsibilities Managing and serving as the lead Project Manager for wastewater, water, stormwater, conveyance, and general municipal engineering projects. Providing technical guidance, senior leadership, and mentoring engineering staff to enhance our water services design capabilities. Being responsible for planning and execution of scope, schedule and budget for projects managed. Completing Quality Assurance/Quality Control reviews of key deliverables. Lead technical marketing by meeting with clients in the region. Participation in professional societies relevant to the industry. Building and maintaining positive working relationships with key decision makers in our clients' organizations. Perform technical engineering project work. Providing excellent client service that generates repeat business. Lead proposal development and participating in interviews for new projects you will help deliver. Benefits Our comprehensive compensation package includes full-time employment company paid medical, dental, and vision coverage; life insurance, short- and long-term disability insurance, and paid pregnancy disability leave; 401(k)/Roth with company match; paid time off; employee referral and professional license bonuses ETC.

DIG Engineers is an award-winning engineering and consulting firm that has been a leader in educational design for more than 25 years. The DIG team works collaboratively with public and private sectors to accurately plan site developments, storm water management, transportation, and more. Join our team of dynamic, creative, bright, and hardworking individuals who strive to help provide economic growth and sustainability for years to come. Here's your chance, are you ready to make a difference? The Civil Project Manager will be the main point of contact in the day-to-day interaction with the Client's designated representative and has the ultimate responsibility for both the quality and effective execution of engineering projects including grading, drainage systems, water distribution and supply systems, wastewater collection and treatment systems, and roadways. The Civil Project Manager will also play a key role in the hands-on design of engineering projects. Your Impact: * Prepare WQMP's, Erosion Control Plans and Hydrology calculation packages. * Plans, schedules, conducts, and coordinates assigned engineering work. * Prepares estimates for engineering work. * Provides guidance and continuously educate team members on standards and changes within client or scope of work. * Work with the Firm's management on various aspects of assigned projects. * Preparation of weekly project status reports for assigned projects. * Attending meetings with the Client for project review and coordination. * Research and preparation of feasibility documents. * Ensures effective communication and coordination on assigned projects between all disciplines and all other project consultants. * Management, preparation, and coordination of all technical designs of multiple projects. * Monitors work for compliance with applicable codes, accepted engineering practices, standards, and design criteria. * Proactively work with the appropriate authorities having jurisdiction to obtain plan approval and permits. * Attend construction meetings and conduct field observations. Here's What You'll Need: * Bachelor's degree in Civil Engineering required, Master's degree preferred. * 8+ years of experience since graduation. * Licensed professional engineer (P.E.) preferred. * Highly proficient with AutoCAD Civil 3D and MS Office suite. * Excellent communications skills both oral and written. * Excellent interpersonal skills with coworkers, owners and public agency officials. * Familiarity with regional design criteria. * Self-starter. * Ability to work interdependently within a team environment. * Must have Stormwater/Hydrology experience * Must be flexible to changes and able to operate in a fast-paced environment. The actual offered base salary for California locations will vary depending on factors such as individual qualifications, education, experience, skills, job-related knowledge, work location, and internal equity. We would not anticipate that the individual hired into this role will be at or near the top half of the range provided, but the decision will be dependent on the factors of each individual case. The compensation package may also include incentive compensation in the form of discretionary bonuses in addition to base salary and a full range of medical, financial, and other benefits. The salary range for this position is below. $110,930.00 - $166,395.00 PBK is an Equal Employment Opportunity employer. All qualified applicants can be considered for an opportunity without regard to sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, criminal history, or any other characteristic protected by law. Additionally, it is our policy to provide equal employment opportunity in all phases of employment in compliance with all applicable federal and state laws, rules, and regulations.

At Shawmut Design and Construction, we take pride in the culture we've built as a 100% employee-owned company-one that's been recognized with more than 85 Best Place to Work awards. We've been honored as a National Fortune Best Workplace, a Fortune Best Workplace for Women, Millennials, and Parents, and one of America's Best Employers by Forbes-along with numerous regional recognitions across our 11 offices nationwide. Here's a glimpse into what we offer: Health, Dental, and Vision Insurance. Employee Stock Ownership Plan (ESOP) - Be an employee-owner! 401(K) with Company Match - Receive a company match up to 4% of your eligible pay. Generous Paid Time Off - vacation and sick time, 12 holidays, summer Fridays, and a yearly volunteer day. The Extras - Cell phone, laptop, tuition reimbursement, pet insurance, financial planning services, and more. Responsibilities We're planning ahead for upcoming projects in 2026. Do you have large commercial construction experience, a great attitude with a strong client focus, and the ability to work in a collaborative environment? Resumes are welcome, and early conversations are starting now to join our Brownsville TX team. Developing a purchasing schedule and strategy to anticipate, address and resolve purchasing challenges during the early stages of pre-construction. Collaborating with Estimating and Purchasing in set up of projects to insure profitability, client satisfaction and the best subcontractors for the project. Working in partnership with the Project Superintendent to maintain an updated and accurate project schedule. Thorough completion of all financial data with an eye to quickly identify potential/existing issues that could lead to subpar financial performance. Maintaining and developing relationships to reinforce a commitment to world-class customer service across the board: including co-workers, clients, subcontractors, vendors, and the design community. Qualifications 7-10+ years of experience in construction project management with a commercial general contractor. Experience building projects specifically in commercial, hospitality, multi-family residential, schools, hotel, sports arenas, and health-care Direct responsibility of leading and developing staff. Highly organized, client focused, and ability to connect. Must live a commutable distance to the Brownsville, Texas area Bi-lingual a plus! EEO Information Shawmut prohibits discrimination against any staff member or applicant on the basis of race, color, sex, sexual orientation, gender identity/expression, age, religion, national origin, marital status, veteran status, pregnancy, physical or mental disability, genetic information, disability, creed, citizenship status, or any other legally protected characteristic. Salary Range Information Brownsville Base Salary Range: $90,000 - $130,000 The range stated is specific to Brownsville, Texas. Placement within the listed range depends on many factors including, but not limited to years of experience, project size capability (for Construction & Field roles) and internal company equity.

TADCO Roofing and Waterproofing is a premier commercial roofing specialist dedicated to delivering exceptional roofing solutions from conception to completion. With locations in Houston and the Rio Grande Valley, we pride ourselves on building long-term partnerships with our employees, suppliers, manufacturers, clients, and stakeholders. Our commitment to safety, quality, and value is the cornerstone of our operations, and we strive to earn trust one roof at a time. We are looking for a skilled commercial Project Manager whose primary function is to oversee commercial roofing projects from initiation to completion, ensuring adherence to timelines, budgets and quality standards. Responsibilities Roofing Expertise: Demonstrate extensive knowledge and experience in various commercial roofing systems, including TPO, PVC, EPDM, Modified Bit, Coatings, etc. Inspections: Conduct roof inspections, core samples, and assessments to determine project requirements and provide accurate estimates. Documentation: Create comprehensive material lists, scopes of work, and project documentation. Quality Control: Implement and manage quality control measures to ensure the highest standard of workmanship. Project Manager of all Operation jobs Communication: Maintain effective communication with clients, contractors, and internal teams throughout the project lif Providing a positive customer experience. We consider our customers our number one priority: we encourage our managers to constantly interact with their customers to ensure an enjoyable customer experience. Scheduling, paperwork, deadlines and communication. Perform a key role in planning and implementing as well as improving the current process. Verifying and signing off on all timesheets Prepare and/or review roof reports with photos Requirements & Skills 3-5 years commercial roofing experience and 5 years minimum project management/customer service experience (roofing-commercial construction preferred). Must be able to work extended hours, including weekends when business requires Knowledge of Microsoft Word and Excel Excellent communicator Positive/solution-based approach to challenges. What We Offer: Competitive salary Comprehensive benefits package, including medical, dental, and vision insurance Paid time off Opportunities for professional development and growth Job Type: Full-time /In Houston Office Pay: Negotiated Salary If you're ready to make an impact in a dynamic workplace, we want to hear from you. Apply today!

At Shawmut Design and Construction, we take pride in the culture we've built as a 100% employee-owned company-one that's been recognized with more than 85 Best Place to Work awards. We've been honored as a National Fortune Best Workplace, a Fortune Best Workplace for Women, Millennials, and Parents, and one of America's Best Employers by Forbes-along with numerous regional recognitions across our 11 offices nationwide. Here's a glimpse into what we offer: * Health, Dental, and Vision Insurance. * Employee Stock Ownership Plan (ESOP) - Be an employee-owner! * 401(K) with Company Match - Receive a company match up to 4% of your eligible pay. * Generous Paid Time Off - vacation and sick time, 12 holidays, summer Fridays, and a yearly volunteer day. * The Extras - Cell phone, laptop, tuition reimbursement, pet insurance, financial planning services, and more. Responsibilities We're planning ahead for upcoming projects in 2026. Do you have large commercial construction experience, a great attitude with a strong client focus, and the ability to work in a collaborative environment? Resumes are welcome, and early conversations are starting now to join our Brownsville TX team. * Developing a purchasing schedule and strategy to anticipate, address and resolve purchasing challenges during the early stages of pre-construction. * Collaborating with Estimating and Purchasing in set up of projects to insure profitability, client satisfaction and the best subcontractors for the project. * Working in partnership with the Project Superintendent to maintain an updated and accurate project schedule. * Thorough completion of all financial data with an eye to quickly identify potential/existing issues that could lead to subpar financial performance. * Maintaining and developing relationships to reinforce a commitment to world-class customer service across the board: including co-workers, clients, subcontractors, vendors, and the design community. Qualifications * 7-10+ years of experience in construction project management with a commercial general contractor. * Experience building projects specifically in commercial, hospitality, multi-family residential, schools, hotel, sports arenas, and health-care * Direct responsibility of leading and developing staff. * Highly organized, client focused, and ability to connect. * Must live a commutable distance to the Brownsville, Texas area * Bi-lingual a plus! EEO Information Shawmut prohibits discrimination against any staff member or applicant on the basis of race, color, sex, sexual orientation, gender identity/expression, age, religion, national origin, marital status, veteran status, pregnancy, physical or mental disability, genetic information, disability, creed, citizenship status, or any other legally protected characteristic. Salary Range Information Brownsville Base Salary Range: $90,000 - $130,000 The range stated is specific to Brownsville, Texas. Placement within the listed range depends on many factors including, but not limited to years of experience, project size capability (for Construction & Field roles) and internal company equity.

Job Description SLS is seeking an experienced Project Manager (PM) to join a fast-growing and dynamic Federal Services Division in pursuit of heavy civil infrastructure projects throughout the Southwestern United States. The PM will be responsible for either one or multiple projects and manage all interactions with internal and external stakeholders including the client. The PM will also manage day to day execution of the project through all phases from initial startup, design and engineering, construction management, change management, closeout, commissioning, and warranty work. The PM will be responsible to a Project Executive for the profit and loss of each individual project and/or portfolio of multiple projects. The Federal Services Division has a growing backlog of civil infrastructure projects across the Southwestern United States and is aggressively pursuing additional project opportunities with federal clients such as the U.S. Army Corps of Engineers (USACE), Naval Facilities Engineering Command (NAVFAC), and U.S. Department of State (DOS). Essential Duties and Responsibilities: Serve as Project Manager reporting to an experienced Project Executive. Manage the project's profit & loss to preserve profitability throughout the project's life cycle. Manage and maintain a healthy client relationship while protecting company interests. Provide oversight of the design program to be managed by the Designer of Record. Provide oversight of construction operations to be managed by the Superintendent. Provide oversight of the safety program to be managed by the Safety Manager. Provide oversight of the quality program to be managed by the QC Manager. Provide oversight and management of the project schedule through the Scheduler. Provide oversight and management of AR and AP through the Project Comptroller. Negotiate and execute contracts and purchase orders with subcontractors and suppliers. Chair weekly and/or monthly project meetings with all interested stakeholders. Communicate frequently and effectively to ensure the project team is well-informed. Ensure all contract requirements, administrative or otherwise, are satisfied in a timely manner. Identify and advocate internally for all resources necessary for project success. Perform all other duties as may be assigned by the Project Executive or Division President. Other duties as assigned. Position Requirements: B.S. Degree in Engineering, Architecture, or Construction Management required. 5+ years' experience as PM for heavy civil infrastructure projects valued $25M+ required. Advanced Degree (MBA, MS) or Professional Registration (PMP, PE) preferred. Experience with DOD/USACE/NAVFAC preferred. Experience managing large project teams of diverse professionals preferred. Ability to speak, read, and write fluent English required. Ability to successfully pass background/security check required. Strong proficiency with MS Office is required, and Primavera P6 is preferred. Physical Demands: Use of manual dexterity, tactile, visual, and audio acuity. Use of repetitive motion, prolonged periods of sitting and standing, and sustained visual and mental applications and demands. Occasional lifting (up to 40 pounds), bending, pulling, and carrying. Quantitative/mathematical ability (addition, subtraction, multiplication, division, standard measurements). Ability to work outside in and around construction sites safely. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Benefits: Safe Harbor 401(k) Plan Health insurance Dental insurance Vision insurance Company-paid disability and life insurance Voluntary life insurance Paid sick time Paid time off Affirmative Action/EEO Statement SLSCO LTD is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without discrimination because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, disability status, protected veteran status, or any other federal, state, or local protected class.

Benefits: Dental insurance Health insurance Opportunity for advancement Vision insurance Join 24 Hour Flood Pros, a rapidly growing multi-state organization that is on the lookout for driven individuals to join our team. Over the past five years, we've experienced substantial growth, and we're poised for even greater expansion in the next five years. If you thrive in a challenging yet rewarding environment and are eager to be part of our exciting journey, apply now and become a key player in our thriving company. We are seeking a Reconstruction Project Manager to join our team! You will oversee project planning, scheduling, budgeting, and implementation. Responsibilities: Oversee all aspects of construction project from planning to implementation Allocate resources for assigned projects Supervise onsite personnel and subcontractors Interface with project inspectors, contractors, architects, engineers, city and county officials, and clients Negotiate with contractors to receive reasonable order costs Maintain high standards of workmanship that adhere to original plans and specifications Ability to read Xactimate scopes of work (ability to write basic Xactimate estimates preferred but not required) Qualifications: Previous experience in construction management or other related fields Familiarity with construction management software Strong leadership qualities Strong negotiation skills Deadline and detail-oriented Compensation: $55,000.00 - $75,000.00 per year EMERGENCY WATER & FLOOD RESTORATION CAREERS About 24 Hour Flood Pros™ Here at 24 Hour Flood Pros™, our mission is to bring the best and fastest response service to emergencies at residential and commercial properties throughout the entire country. We're looking for skilled technicians, along with those who are passionate about helping people in their time of greatest need. Whether you have experience in flood, fire, or plumbing emergency response, give us a call or visit us online to learn more about how you can help the 24 Hour Flood Pros™ team. Dedicated Team Members We're looking for those, first and foremost, whose passion and values align with our mission to provide the best and fastest emergency response service. Even if you don't possess skills across all our service areas, if you're willing to take constructive criticism, dedicate yourself, and put the people in need first, we might just have a place for you. All the skills in the world won't compensate for lack of dedication to this work, which requires our team to respond to emergency situations at all times of day and night.

Posillico is Building for Generations. Posillico is a multi-disciplined and diversified construction company. Along with our Civil /foundation group, Posillico's business units include Wastewater Division, Environmental Division, Utilities Division, Drilling Division, Paving Division, Posillico Consulting LLC, Posillico Developmental LLC, and Posillico Materials, LLC. These companies give Posillico the unequalled, leveraged experience required to complete complex structural and geotechnical projects successfully. Posillico empowers a “people first, think safety” culture throughout our organization. This “people first” culture has helped to promote and maintain an excellent record of accomplishment. Posillico has an exceptional safety program coupled with proactive employees throughout its management and union staff. We offer all employees an excellent opportunity to be part of our developing business at Posillico, as we set the standards for excellence in the construction industry with our integrated solutions. Our company mission is to complete all our projects safely, on time, on target and on budget while having a positive impact in the community. Follow us at… Facebook Instagram LinkedIn Responsibilities POSITION SUMMARY: The Project Engineer assists the Project Manager/ Executive by tracking and maintaining records that are associated with submittals, costs, deliveries and payroll at the job site. The Project Engineer is also responsible for tracking and maintaining all safety communications, manuals and records. Safety: Prepare and give weekly Toolbox Talks, Daily Safety Huddles and maintain records. Maintain a file for One Call Center requests to ensure no utilities are damaged during construction activities. Maintain a retrievable filing system for the Hazardous Communication Program - MSDS. Maintain the Project Safety Manual, make periodic jobsite safety inspections and record/file all findings. Maintain records of site safety inspections and track all injuries that occurred on the project. Payments: Perform daily quantity review with Superintendent and Job Foreman. Enter daily quantities into system and file daily sheets. Track completion of work on project plans. Perform monthly review of estimates with job Superintendent/ Project Manager. Maintain a file, tracking all extra work. Notify Project Manager or Division Manager of anticipated overruns/underruns. Submit monthly estimated with subcontractor payment sheets to Accounting upon approval from the owner. Request a copy of Final Estimate with each monthly estimate and send to Area Manager - State DOT projects only. Review and approve material and supplier invoices for the project on a regular basis. Daily Logs: Maintain general correspondence file with correspondence log. Maintain Shop Drawing Log. Maintain Subcontractor Daily Log. Maintain Delivery Log. Accurately track asphalt and other major materials that are delivered verses the quantity paid. Develop and update Submittal Log. Certified Payroll, EEO, Trainee Reports: Enter daily payroll information by specific task and assist in productivity tracking. Track all subcontractors that worked on the project for the month utilizing the Subcontractor Daily Log. Submit copies of the Sub. Log to Payroll monthly and notify Area Managers of delays. Miscellaneous: Maintain job records. Track job codes using Phase Code System. Maintain the Request for Information (RFI) to the owner. Assist in purchase of job materials to ensure the proper quantities are delivered. Review project plans and assist in ensuring work is completed properly. Develop project look-ahead schedules. Review project specifications and prepare/track submittal packages accordingly. Review subcontractor submittal packages for accuracy. Qualifications QUALIFICATIONS: B.S. Degree in Engineering with 2 to 3 years of related experience. Experience in Heavy Construction (site-work, roads or environmental). Must be capable of meeting deadlines, self-motivated, detail oriented, excellent interpersonal skills and have excellent follow-through capability. Verbal and written communication skills are essential to this position. Ability to perform effectively in a fast-paced environment; able to accurately process written documents, perform duties in a timely manner, be highly organized and able to interface; communicate effectively with company, clients and field personnel at all levels. Location: Mission, TX and surrounding areas Equal Employment Opportunity Posillico Civil, Inc. is committed to maintaining a working environment that promotes teamwork and that is free of any and all forms of unlawful discrimination and harassment. Accordingly, all of its employment-related activities will be administered without regard to race, color, religion, sex, national origin, age, disability, veteran and military status, marital status, personal appearance, sexual orientation, family responsibilities, domestic violence victim status, matriculation, political affiliation, genetic information, predisposing genetic characteristics or other legally protected personal characteristic. #LI-Onsite Posillico Civil, Inc. together with its parent, subsidiaries, affiliates, partners and joint ventures (collectively “Posillico”) do not accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to Posillico or an employee of Posillico, by mail, electronically, or otherwise will be considered property of Posillico. Posillico will not pay a fee for any placement resulting from the receipt of an unsolicited resume. Posillico will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. As a condition for payment, an Agency shall have an agreement signed by an authorized Posillico representative. Verbal or written communications from any employee of Posillico shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be the property of Posillico.

Job ID: R0115663 Company Name: HITACHI ENERGY USA INC Profession (Job Category): Engineering & Science Job Schedule: Full time Remote: No Job Description: About the Role: Hitachi Energy, located in Alamo, TN, is seeking a Manufacturing Engineer. This position will participate in the development and application of various processes and utilization of specialized equipment to efficiently accomplish such objectives as fabrication, production, modification, or repair of Hitachi Energy products. How You'll Make a Difference: Monitor progress, comply with quality and schedule requirements, and maintain detailed logs and records Perform complex engineering assignments associated with various engineering activities Write work instructions, job aids and standard work. Write technical specifications for equipment procurement. Design tools and equipment to develop and improve manufacturing processes. Perform hands on troubleshooting in manufacturing environment. Write, maintain and analyze process recipes within several digital environments. Compile and assimilate data from various sources, conduct relatively routine operations and tests, prepare reports and develop graphics for presentations. Use computer programs to perform various engineering operations, conduct analyses and provide related data and information. Participate in and assist engineers involved in a variety of more complex engineering activities. Assignments require application of standard engineering concepts, familiarization with related computer programs, and general understanding of the group's operations in order to provide effective engineering support. Requires ability to communicate effectively and resolve routine problems. Lead and participate in Kaizen and Process Excellence events using LEAN methodology to continuously improve manufacturing flows and processes. Your Background Bachelor's Degree in engineering; alternatively, a special combination of education and experience and/or demonstrated accomplishments. Equal Employment Opportunity (EEO)-Females/Minorities/Protected Veterans/Individuals with Disabilities Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Are you ready to see your future take flight? At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. **Job Description** Job Summary Help invent the future of flight, lift people up, and bring them home safely as a GE Aerospace intern! The Manufacturing Engineering internship offers a distinct role based on your major and field of interest: **Manufacturing Engineering Internship:** In this role you will build a strong technical foundation in manufacturing and assembly processes. This may include key manufacturing, new product integration, new technology integration, continuous improvement, and cost out. This internship is a great first step for those interested in our MEDP or OMLP program after graduation. Essential Responsibilities Our Manufacturing and Supply Chain organizations combine passionate people, cutting-edge technology, and a culture of continuous improvement to provide the highest quality products to our customers. Members of our team are part of a fast-paced and dynamic environment. They typically have the benefit of getting hands-on experience with our products. In either internship experience, you'll be expected to: + Learn and understand state-of-the-art methods of manufacturing, + Support manufacturing and repair processes for component hardware and/or overall engine assembly, + Maintain high-quality standards via risk assessment, root cause analysis, corrective action, and the application of statistical controls + Ensure safe work conditions via Environmental, Health & Safety (EHS) initiatives + Learn and apply Lean and Six Sigma principles to drive productivity, on-time delivery, process capability, and stable operations in our increasingly complex and demanding environment + Supporting delivery efforts for sourced components by working with our shops and suppliers while building project management skills, negotiation skills, and business acumen Qualifications/Requirements: + Minimum 3.0 cumulative G.P.A. on a 4.0 scale without rounding + Attending a full-time registered and nationally accredited bachelor or graduate program (accepted majors are listed below) + Willingness and ability to work in any of the 35+ GE Aerospace U.S. locations + Reliable transportation, as many of our sites do not have public transportation available Degrees accepted: + Aeronautical/Aerospace Engineering + Ceramic Engineering + Chemical Engineering + Civil Engineering + Computer Engineering + Computer Science + Electrical Engineering / Electrical & Computer Engineering + Engineering Technology (various) + Fiber/Polymer Science + Industrial Engineering + Manufacturing Engineering + Materials Science/Engineering + Mechanical Engineering + Systems Engineering + Welding Engineering Or any relevant or similar major to the ones above Eligibility Requirements: Any offer of employment is conditioned upon the successful completion of a background investigation and drug screen. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired characteristics: + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with honesty, contributes constructively + Focused: quick learner, strategically prioritizes work, committed, and takes initiative + Leadership ability: strong communicator, decision-maker, collaborative teamwork + Problem solver: analytical-minded, challenges existing processes, critical thinker + Comfortable working in a fast-paced shop floor environment around various machine tools and equipment + Preference will be given to those with prior internship, co-op or military experience in manufacturing/supply chain or engineering + Demonstrated commitment to community and/or university involvement Benefits: Pay rates for this position begin at $20/hour and increase for each undergraduate year completed. Relocation support and housing assistance is available for those who relocate to a new city. Equal Opportunity Employer: _GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an_ Equal Opportunity Employer (******************************************************************************************************************************************************** _._ _Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law._ _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description: Description: Since 1980, CobbFendley has been committed to providing innovative engineering and surveying solutions with the goal of bettering communities. Our multi-discipline approach allows for the efficient completion of projects through experienced staff who focus on client communication. We are always seeking talented and qualified professionals to enhance our ability to provide clients with exceptional service. Are you ready to Join Our Block and advance your career? At CobbFendley, people are our most valued resource. We offer a(n): New Hire Program // We understand changing jobs can be intimidating, CobbFendley has established a program geared specifically to the successful onboarding and integration of new hires into the firm Development Opportunities // Professional and personal growth through innovative in-house training and collaborative resources Compensation + Benefits // Competitive compensation package with comprehensive benefits including 401(k) Matching and Profit-sharing Contributions; Employee Stock Ownership Plan (ESOP); Health, Vision, and Dental Insurance; Short-Term and Long-Term Disability Insurance; Employer Funded and Voluntary Life Insurance; Tuition Reimbursement; and Continuing Education Programs Paid Parental Leave // FMLA-eligible employees will receive fully paid leave in the amounts of eight (8) weeks for maternity cases and two (2) weeks for paternity or adoptions cases Winter Holiday // Extended office closure from December 25 through January 1 to relax and enjoy the holidays Community Engagement // CobbFendley Cares focuses on STEM Education, Hunger Relief, and Sustainable Solutions CobbFendley is seeking an experienced Project Manager in our McAllen, Texas office. Requirements: EDUCATION, REGISTRATION, CERTIFICATION Engineering: Bachelor's degree in a civil or related engineering discipline in which the degree would meet state eligibility requirements for licensing, required. Engineering: Registration and designation as a Professional Engineer (PE), required. EXPERIENCE + KNOWLEDGE SKILLS ABILITY (KSA) Intermediate // Developing skills with some practical experience; able to perform tasks with occasional assistance. 6+ years of professional experience within a discipline, including a minimum of 1 year as a Deputy Project Manager. Knowledge of project management methodologies and lifecycle, industry standards, city, state, and federal rules and regulations, tools and software (i. e. , Microsoft suite, Vantagepoint, Smartsheet, etc. ), and quality management required. Skills including leadership, communication, time, risk, quality and financial management, negotiation, and problem-solving required. Ability to think strategically, adapt to competing priorities, execute and delegate, communicate and collaborate, and perform tasks with a high level of accuracy required. COMPLEXITY + DECISION-MAKING AUTHORITY 1. Responsible for the success of projects of small to moderate scope. *Must be listed as a Project Manager in Vantagepoint but may be responsible for direct invoicing and billing to clients. 2. Independently performs most assignments, clear understanding of project flow with field experience, and escalates project decisions to supervisor. RESPONSIBILITIES 1. Financial Management // a. Utilize weekly budget report and project report to monitor progress on projects and review of accounts receivable (A/R) report. b. Prepare scope of work (SOW), Levels of Effort (LOE) and schedules for projects. Identify out of scope requests and prepare proposals for additional authorizations. c. Responsible for collection of invoices from clients including escalations for past due invoices. 2. Corporate Compliance + Risk Assessment // a. Ensure completion of the contract and subcontract review process through the Contracts Department and appropriate filing and adhere to jurisdictional requirements and company-established signature matrix protocol. b. Cursory review of the initial contract terms and conditions and coordinate as necessary with client for modifications to the contract. c. General understanding of contract payment terms and company-wide fees and negotiation strategies. d. Follow company-established QA/QC process including project kick off and project safety plans. 3. Communication + Collaboration // a. Held accountable for communications and collaboration such as ensuring that messages and information are not only received but understood and acted upon appropriately within the department, other disciplines and regions, and corporate resources. b. Able to articulate project requirements timelines, and deliverables, and corporate directives, in a concise and clear manner. c. Responsible for the completion of meeting minutes and documentation to respective parties. d. Comply with marketing requests including but not limited to input for requests for qualifications (RFQ) and proposals and maintaining updated resumes, etc. 4. Client + Internal Satisfaction // a. Adhere to project schedules set by the client and keep clients informed of any potential delays and work with the supervisor for mitigation plans. b. Be responsive and accessible and address problems and concerns timely and follow up to ensure satisfaction post-resolution. 5. People Development // a. Provide feedback on staff performance to management periodically including for annual evaluation. b. Assist with recruiting project team members. c. May give direction to support staff assigned to project(s) by supervisor and senior project manager(s). 6. Technical // a. Work on projects that include the following scopes: i. Drainage Area Maps ii. Closed Storm System Hydraulics iii. Roadway design, Alignments iv. Sanitary Sewer Design, Force Mains v. Waterline Design vi. Water & Wastewater Design of Plant vii. Project Manual Construction Contract & Specs viii. Permits & Regulatory ix. Technical Report Writing x. Selecting Pumps xi. Lift Station Design xii. Developmental Plan Review xiii. Construction Admin, Limited Inspection xiv. Constructability Review xv. Coordinating Multiple Discipline Design xvi. Construction Phasing xvii. ADA Regulation xviii. Program Manager xix. City of Engineering Services xx. Capital Improvement Plans xxi. Impact Fee b. Utilize the following software applications to complete project work: i. Microsoft Project ii. Bluebeam COBBFENDLEY CHARACTERISTICSWe Collaborate // with a professional attitude making communication a priority. We Commit // to maintaining a safe and inclusive work environment, with a focus on accountability. We Build Communities // by fulfilling our responsibilities with integrity that is consistent with industry standards. PHYSICAL/COGNITIVE REQUIREMENTS + ENVIRONMENTAL FACTORS Most work is performed in a professional office environment. Some trips to client offices and outdoor environments for observations will be required. Seated and Standing Position. Extended periods of sitting and standing in an upright position at a workstation. Mobility. Movement within the office and job sites, including navigating between floors, workstations, and outdoor environments with potential for uneven surfaces. Neck Movement. Forward flexion, extension, or lateral rotation of the head and neck while using multiple computer screens. Repetitive Motion. Repetitive finger movements for operating a computer mouse and typing on a keyboard. Arm Movement. Extending hands and arms in various directions, such as overhead, below the waist, forward, or laterally. Object Handling. Raising or lowering objects from one level to another and transporting objects by holding them in the hands, arms, or over the shoulder. Cognitive Requirements. Selective attention, oral comprehension, oral expression, speech recognition, speech clarity, written comprehension, written expression, problem sensitivity, deductive reasoning, inductive reasoning, number facility, information ordering, category flexibility, flexibility of closure, fluency of ideas, and originality. Office Conditions. Includes extensive use of electronic devices such as computers, printers, copiers, scanners, plotters, and telephones. Additionally, tasks may involve the use of cutting tools and equipment like rotary paper cutters and plotting devices. Outdoor Conditions. Includes walking and climbing on uneven surfaces, confined spaces, and exposure to extreme weather conditions (heat and freezing temperatures). Potential exposure to high noise levels and various allergens, including poison ivy, sumac, dust, pollen, and cedar. Potential exposure to wildlife hazards such as animals, insects, and plants. Safety and Equipment Use. Regular use of personal protective equipment (PPE) is required, along with use of hand and power tools. Driving and Vehicle Use. May involve driving large pick-up trucks with attached trailers, potentially operating watercraft, and for extended periods of time. EXPECTED WORK HOURSThis is a full-time position, generally 40 hours per week, however, hours may fluctuate depending on department needs including the use of overtime. CobbFendley's standard operating hours are Monday through Friday, 7:30 AM to 4:30 PM CST. Generally, employees receive a 1-hour unpaid lunch break free of duty. Please note, operating hours and lunch hours may differ based on project workload, primarily for field staff. WORK LOCATION FLEXIBILTY This position is eligible for a hybrid schedule once the training period is complete as established by the department. EQUAL EMPLOYMENT OPPORTUNITY Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. EEO is the Law (English) EEO is the Law (Spanish) EEO is the Law - Poster Supplement MISCELLANEOUS Pre-Employment Screenings. All offers of employment at CobbFendley are contingent upon the prospective employee passing a drug screening, physical exam (if applicable), and various background verifications (including but not limited to 10-year history of the county, state, federal, and a 5-year history of motor vehicle records). CobbFendley complies with all applicable state and federal laws regarding said screenings. Unless and only to the extent state or federal law limits CobbFendley's drug-testing requirements for initial hiring, all candidates for employment are subject to pre-employment drug screening verification which may include a panel drug test for use of marijuana and other substances that may be lawful under state law but unlawful under federal law. A positive result may lead to disqualification of candidacy or termination from employment to the extent permitted by law. CobbFendley reserves all rights with respect to its drug-testing, other pre-employment screenings, and workplace policies and procedures. External Recruiting Agencies. CobbFendley does not and will not accept unsolicited resumes under any circumstances from independent recruiters, recruiting agencies, or similar entities. Recruiting activity on behalf of a candidate does NOT constitute CobbFendley's acceptance of terms and conditions without prior contractual agreements signed by authorized CobbFendley personnel. Unsolicited resumes through any channels including cold calling, emails, applications, social media messaging, etc. , will not be reviewed. Work Authorization + Sponsorship. Cobb, Fendley & Associates, Inc. participates in E-Verify. E-Verify is an Internet-based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA). The E-Verify system uses federal databases to rapidly validate individual identities and work eligibility from the information gathered in the Form I-9. CobbFendley will not sponsor applications of work visas. We understand that this could affect your decision to apply with these conditions in mind. Applicant Accommodations. Consistent with the Americans with Disabilities Act (ADA) it is the policy of CobbFendley to provide reasonable accommodation when requested by a qualified applicant or candidate with a disability, unless such accommodation would cause an undue hardship for the Company. The policy regarding requests for reasonable accommodation applies to all aspects of the hiring process. If reasonable accommodation is needed, please contact the HR Department at 713. 462. 3242 or HR@cobbfendley. com. Drug-Free Workplace Conditions Medication Disclosure: Employees and job applicants shall receive notice of the most common medications, either by brand name, common name, or chemical name, that may alter or affect a drug test. A list of such medications shall be developed by the Agency for Health Care Administration. Contesting Positive Results: An employee or job applicant who receives a positive confirmed drug test result may contest or explain the result to the employer within 14 days after written notification of the positive test result. Responsibility to Notify the Laboratory: The employee or job applicant has the responsibility to notify the testing laboratory of any administrative or civil actions brought pursuant to this section. List of Drugs for Testing: A list of all drugs for which the employer will test can be supplied upon request, described by brand names or common names, as applicable, as well as by chemical names. Right to Consult the Testing Laboratory: Employees and job applicants are notified of their right to consult the testing laboratory for technical information regarding prescription and nonprescription medication.

Job Description The Construction Project Manager will be responsible for overseeing and managing all construction activities on USACE. They will work closely with the Project team to ensure that projects are completed on time, within budget, and meet the required quality standards. The Construction Superintendent will coordinate with subcontractors, suppliers, and other project stakeholders to ensure smooth execution of construction activities. They will also be responsible for maintaining a safe and productive work environment, adhering to all safety regulations and company policies. The ideal candidate will have strong leadership and communication skills, with the ability to effectively manage a team and resolve any issues that may arise. They must have a solid understanding of construction techniques, building codes, and regulations, as well as experience in managing complex construction projects. The Construction Superintendent should have a high attention to detail, with the ability to review and interpret construction drawings, specifications, and contracts. They must also be highly organized, able to prioritize tasks and manage multiple projects simultaneously. • Oversee and manage all construction activities on USACE projects • Work closely with the Project team to ensure projects are completed on time, within budget, and meet quality standards • Coordinate with subcontractors, suppliers, and other project stakeholders • Maintain a safe and productive work environment • Review and interpret construction drawings, specifications, and contracts • Resolve any issues or conflicts that arise during construction • Conduct regular site visits and inspections to ensure work is progressing according to plan • Generate progress reports and update project schedules as needed • Communicate regularly with project stakeholders to provide updates and address any concerns • Provide leadership and support to the construction team • Ensure compliance with all safety regulations and company policies Requirements Bachelor's degree in Construction Management, Engineering, or related field Minimum of 5 years of experience as a Construction Management Experience working on USACE projects Strong knowledge of construction techniques, building codes, and regulations Excellent leadership and communication skills Ability to effectively manage a team and resolve issues High attention to detail Ability to read and interpret construction drawings, specifications, and contracts Strong organizational and time management skills Proficient in Microsoft Office suite Valid driver's license Ability to pass a background check and drug screening The personnel need to be familiar with all USACE work, RMS use, P-6 scheduling etc. Benefits Competitive Salary, per diem, car allowance and Medical,Dental and Vision covered for contractor