Quality control analyst jobs in Alton, TX

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Amex Distributing Company specializes in cold storage and warehousing services for the fresh produce industry from the McAllen, TX area. We are looking for a quality control professional to join our team. The ideal candidate is professional, responsible, punctual, able to move/stand - sometimes for long periods, comfortable in a cold storage environment with strong communication skills (oral/written). The QC Inspector makes sure the right product quality is adequately paired with the customer. This is done by conducting product inspections, communicating and documenting the findings to the required parties, and by physically staging product by order, accurately and on time. The position requires an understanding of USDA grading standards and familiarity with retail and foodservice customer specifications. The position holder should be communicative and knowledgeable about product quality, as well as consistent and methodical in their inspection approach. This position requires the position holder to drive a company or a personal vehicle to scout and inspect fresh produce at various cold storage facilities. For this reason, the QC Inspector must undergo and pass a motor vehicle history check and maintain a current, valid driver's license in their state of residence. The position holder will be unable to perform driving responsibilities until clearance has been given by management to do so. Key Responsibilities Include: Responsible for visually inspecting fresh produce to identify quality and condition. Preparation and sending of of inspection reports. Communication between those sourcing, selling, and managing inventory on all quality, condition, and inventory matters. Support with any product rework processes. Communicate quality issues to buyers, sourcing, and inventory control manager / supervisor. Allocate product to orders (understand customer qc requirements). Stage product prior to shipping. Visit local warehouses to inspect product (bird-dog services). Assist in inventory counts. Participate in team meetings, trainings, and provide updates on product quality matters. Stay on top of customer QC requirements Develop understanding of USDA grades and standards by commodity Support and cross train with others as needed. Core Skills and Competencies Strong communication skills, strong interpersonal skills, able to develop/maintain good relationships. Convey professional etiquette when dealing with stakeholders (e.g. staff, customers, suppliers) at all times Solid understanding of produce varieties handled in a wholesale operation. Experience working with Excel, Word, Outlook. Experience using inspection tools (thermometer, refractometer, penetrometer, etc.). Frequent lifting of the product up to 50 lbs. Famous Software experience is a plus. Bi-lingual (English / Spanish) is strongly preferred. Targeted area is within 15 miles of Pharr, TX or McAllen, TX.

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

The CBP Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: * Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. * Apply technical knowledge and expertise in determining proper equipment installation and operation. * Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. * Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. * Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. * Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. * Review and approve locally developed procedures and solutions to complex repair situations. * Perform analysis of defects and interprets quality control rejection and failure trends. * Monitor safety, training, and certification requirements. * Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. * Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. * Maintain Quality, Safety, Training and Certification Records. * Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. * Inspect forms and records related to aircraft maintenance. * The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. * The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. * Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. * Document maintenance as per Quality Assurance (QA) and established regulatory requirements. * Comply with work order timekeeping system procedures. * Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. * Perform weekly Foreign Object Damage (FOD) walk-downs. * Maintain situational awareness, stay cognitive-focused, and mitigate risks. * Comply with processes and procedures as per DHS/DOD documents and publications. * Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. * Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. * Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. * Perform weekly break room and smoking area cleaning duties. * Perform other duties as assigned. Minimum Requirements: * Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain a CBP Background Investigation Suitability clearance. * High School Diploma or equivalent is required. * Five (5) years of experience in rotary wing aircraft. * Valid Airframe and Power Plant (A&P) License required. * Valid FAA Inspection Authorization (IA) required. * Ability to obtain a Government flight line driver's license. * Possess a valid United States driver's license. * Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. * Ability to read and interpret data is required. * Ability to read, write, speak and understand English. Physical Requirements/Working Environment: * Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. * Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. * Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices. * Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. * May be required to work night shifts. * May work in Aircraft maintenance hangar or outside. * Some domestic travel may be required. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Pure Hothouse Foods, marketed under the Pure Flavor brand, is a family of greenhouse vegetable growers who share a commitment to bringing A Life of Pure Flavor™ to communities everywhere. Our passion for sustainable greenhouse growing, strong support for our retail & foodservice customers, and focus on engaging consumers is built on a foundation drawn from generations of growing expertise. We are the next generation of vegetable growers, inspired to put quality, flavor, and customers first by providing greenhouse-grown vegetables from our farms that are strategically located throughout North America. With a dedicated, energetic and highly skilled workforce, we believe our employees make the difference. We offer our employees the opportunity to advance their careers in our progressive, vibrant organization. Job Summary: The is responsible to assess and report on the quality of all vegetables received, in inventory, and shipped from the facility and ensures that all products shipped meet or exceed customer and regulatory requirements. Responsibilities: Ensure all loads of vegetables arriving at the facility are visually inspected; Perform outbound inspections on shipments Complete QC Inspection Reports for each arriving load, including distressed loads, or any load we deem necessary Ensure all inventory is assessed and is categorized according to its quality and condition Place and release quarantine/on-hold product Conduct outgoing quality checks and/or review the checks conducted by the shippers Regularly inspect finished product and packaging for adherence to standards, when requested or applicable Qualifications: Secondary school education or equivalent required; post secondary education, preferred Minimum (1) year experience as a Vegetable Inspector or Quality Inspector in produce or related industry, preferred Knowledge of Good Manufacturing Practices, Health and Safety, and Food Safety Basic understanding of Fresh Fruit & Vegetable regulations, plus Consumer Packaging & Labeling requirements and standards Computer skills (essential) Proven ability to work in a fast-paced environment, demonstrate keen attention to detail and task-related accuracy Strong verbal and written communication skills Other core expectations as defined by the company Work Environment: Hours of work may vary depending on business needs; flexibility is required This job operates within a refrigerated warehouse, where temperatures range. The noise level in the work environment can be loud due to packaging machinery, and forklift truck operation. The employee frequently is required to stand; walk; bend; twist; use hands to handle or feel product or packaging; and reach with hands and arms. The position involves walking and lifting, regularly, up to 30-pounds, occasionally up to 50-pounds. Visual requirements. If you are looking for a challenging and rewarding career opportunity, submit your resume to Pure Flavor today! Pure Flavor is committed to providing an accessible and barrier-free environment for all individuals, including candidates and employees. We are an equal opportunity employer and comply with all applicable accessibility and accommodation legislation, including the Accessibility for Ontarians with Disabilities Act (AODA) in Canada and the Americans with Disabilities Act (ADA) in the United States. Accommodations are available upon request for candidates participating in all aspects of the selection process. If you require accommodation, please contact our Human Resources department. Check us out at ******************* or follow us on Facebook, Twitter, Instagram or LinkedIn.

TITLE : QC Inspector - HRL REPORTS TO: Manager, QC. The QC Inspector is responsible for performing inspection functions in accordance with Global X's Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role ensures that parts, materials, maintenance, and workmanship meet Global X standards, while monitoring performance measures through audits of internal and vendor organizations. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Perform Line Maintenance, Remain Overnight (RON), and Receiving Inspections (RI). Monitor maintenance, workmanship, and materials for compliance with Global X procedures and FAA standards. Perform RII in-process inspections and ensure proper documentation. Audit completed aircraft records (logbooks, work cards, non-routines, engineering documents, etc.) generated by C-Check, RON, and Line Maintenance. Provide oversight during Heavy or Special Maintenance visits. Perform Borescope inspections within qualified method and level. Ensure accuracy and completeness of all work documents and records. Initiate discrepancies in maintenance logbooks and non-routine forms. Provide “buy-back” of RII and non-RII maintenance actions. Approve return-to-service of maintenance, preventive maintenance, and alterations. Issue Airworthiness Releases (AWR). Reject unsatisfactory work or non-conforming parts per procedures. Prepare and issue audit reports identifying hazards/risks, corrective actions, and track resolution progress. Conduct inspections and audits of contractors/vendors (e.g., repair/overhaul services, contract maintenance, deicing, fueling, and parts distributors). Follow all safety rules to maintain a safe working environment. Perform other duties as assigned by the DOM/DQC. SKILLS AND QUALIFICATIONS: Knowledge of the TRAX system. Valid FAA A&P license, held for at least 5 years. Previous verifiable inspection experience (OJT, training records, certificates, etc.), including RII Authorization. Preferred: prior experience with NDT methods such as Liquid Penetrant, Eddy Current, and Borescope inspections. Strong analytical, problem-solving, and communication skills. Previous experience with aircraft parts and materials handling. WORK LOCATION AND SCHEDULE: This position is based in Harlingen, TX. The standard schedule follows a four-days-on, three-days-off rotation with 10-hour shifts. Work hours and shift assignments may vary, and the schedule is subject to change based on operational needs. Flexibility is required to support the demands of a dynamic aviation maintenance environment. PHYSICAL DEMANDS: The QC Inspector role is performed in a safety-sensitive aviation environment that includes both office settings and aircraft maintenance areas, such as hangars, line stations, and ramp operations. The position requires frequent exposure to varying weather conditions, noise levels, and physical activities associated with aircraft inspections. QC Inspectors must be able to stand, walk, bend, climb, and climb into confined spaces as needed to access aircraft structures and components. The role also involves extended periods of reviewing technical documents and records. Strict adherence to safety protocols and regulatory requirements is essential to maintain a safe and compliant work environment. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Inspecting for quality: Checking for skin damage, temperature, hardness, and other factors that could affect the quality of the avocados Measuring ripeness: Taking temperature readings and measuring the stage of ripeness Inspecting containers: Checking the quality of containers that the avocados are packaged in Monitoring transport: Keeping track of the temperature of the avocados during transport Using software: Using software and barcode scanners to support the inspection process Reporting quality: Creating reports on the quality of the avocados, including any issues that are found Communicating: Working with the sales team to communicate quality issues and ensuring that customers receive high quality products Ensuring safety: Complying with safety policies and procedures, and keeping the work area clean and organized

TITLE : QC Inspector - HRL REPORTS TO: Manager, QC. The QC Inspector is responsible for performing inspection functions in accordance with Global X's Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role ensures that parts, materials, maintenance, and workmanship meet Global X standards, while monitoring performance measures through audits of internal and vendor organizations. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Perform Line Maintenance, Remain Overnight (RON), and Receiving Inspections (RI). Monitor maintenance, workmanship, and materials for compliance with Global X procedures and FAA standards. Perform RII in-process inspections and ensure proper documentation. Audit completed aircraft records (logbooks, work cards, non-routines, engineering documents, etc.) generated by C-Check, RON, and Line Maintenance. Provide oversight during Heavy or Special Maintenance visits. Perform Borescope inspections within qualified method and level. Ensure accuracy and completeness of all work documents and records. Initiate discrepancies in maintenance logbooks and non-routine forms. Provide “buy-back” of RII and non-RII maintenance actions. Approve return-to-service of maintenance, preventive maintenance, and alterations. Issue Airworthiness Releases (AWR). Reject unsatisfactory work or non-conforming parts per procedures. Prepare and issue audit reports identifying hazards/risks, corrective actions, and track resolution progress. Conduct inspections and audits of contractors/vendors (e.g., repair/overhaul services, contract maintenance, deicing, fueling, and parts distributors). Follow all safety rules to maintain a safe working environment. Perform other duties as assigned by the DOM/DQC. SKILLS AND QUALIFICATIONS: Knowledge of the TRAX system. Valid FAA A&P license, held for at least 5 years. Previous verifiable inspection experience (OJT, training records, certificates, etc.), including RII Authorization. Preferred: prior experience with NDT methods such as Liquid Penetrant, Eddy Current, and Borescope inspections. Strong analytical, problem-solving, and communication skills. Previous experience with aircraft parts and materials handling. WORK LOCATION AND SCHEDULE: This position is based in Harlingen, TX. The standard schedule follows a four-days-on, three-days-off rotation with 10-hour shifts. Work hours and shift assignments may vary, and the schedule is subject to change based on operational needs. Flexibility is required to support the demands of a dynamic aviation maintenance environment. PHYSICAL DEMANDS: The QC Inspector role is performed in a safety-sensitive aviation environment that includes both office settings and aircraft maintenance areas, such as hangars, line stations, and ramp operations. The position requires frequent exposure to varying weather conditions, noise levels, and physical activities associated with aircraft inspections. QC Inspectors must be able to stand, walk, bend, climb, and climb into confined spaces as needed to access aircraft structures and components. The role also involves extended periods of reviewing technical documents and records. Strict adherence to safety protocols and regulatory requirements is essential to maintain a safe and compliant work environment. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

The CBP Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. **Principal Accountabilities:** **Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems.** **Apply technical knowledge and expertise in determining proper equipment installation and operation.** **Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.** **Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.** **Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components.** **Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data.** **Review and approve locally developed procedures and solutions to complex repair situations.** **Perform analysis of defects and interprets quality control rejection and failure trends.** **Monitor safety, training, and certification requirements.** **Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections.** **Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements.** **Maintain Quality, Safety, Training and Certification Records.** **Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services.** **Inspect forms and records related to aircraft maintenance.** **The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs.** **The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights.** **Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements.** **Document maintenance as per Quality Assurance (QA) and established regulatory requirements.** **Comply with work order timekeeping system procedures.** **Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties.** **Perform weekly Foreign Object Damage (FOD) walk-downs.** **Maintain situational awareness, stay cognitive-focused, and mitigate risks.** **Comply with processes and procedures as per DHS/DOD documents and publications.** **Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor.** **Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements.** **Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor.** **Perform weekly break room and smoking area cleaning duties.** **Perform other duties as assigned.** **Minimum Requirements:** **Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain a CBP Background Investigation Suitability clearance.** **High School Diploma or equivalent is required.** **Five (5) years of experience in rotary wing aircraft.** **Valid Airframe and Power Plant (A&P) License required.** **Valid FAA Inspection Authorization (IA) required.** **Ability to obtain a Government flight line driver's license.** **Possess a valid United States driver's license.** **Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.** **Ability to read and interpret data is required.** **Ability to read, write, speak and understand English.** **Physical Requirements/Working Environment:** **Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time.** **Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures.** **Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weightlifting devices.** **Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations.** **May be required to work night shifts.** **May work in Aircraft maintenance hangar or outside.** **Some domestic travel may be required.** Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

Full-time Description The QC Specialist is responsible for performing final quality inspections on all serviced vehicles to ensure they meet Bert Ogden Auto Group's safety and quality standards prior to customer delivery. This includes verifying proper torque of all lug nuts and confirming that the oil pan drain plug and oil filter housing are properly secured and free of leaks. The QC Specialist serves as the final checkpoint to guarantee that all vehicles are safe, compliant, and ready for release. Requirements Perform final quality inspections on all serviced vehicles before release. Verify all lug nuts are present, undamaged, and torqued to manufacturer specifications. Inspect oil pan drain plug and oil filter housing for proper installation and leaks. Use proper tools and PPE, ensuring torque wrenches and inspection equipment are calibrated. Document inspection results using the QC Inspection Checklist for each vehicle. Red-tag and report any failed inspections or safety concerns immediately to the Shop Foreman or Service Manager. Record all corrective actions and re-inspect vehicles after repairs. Ensure all completed checklists are signed, dated, and attached to the Repair Order. Coordinate with Service Advisors and Cashiers to verify QC completion before vehicle delivery. Maintain consistent adherence to Bert Ogden Auto Group's safety and quality standards. Remain available during all shop hours and ensure coverage during absences. Uphold zero tolerance for missed inspections or critical safety errors. QUALIFICATIONS Ability to work efficiently in a fast-paced environment. Advanced knowledge of vehicle maintenance procedures. Effective communication skills with customers and team members. EDUCATION and/or EXPERIENCE Strong attention to detail and organizational skills. Proficiency in using torque wrenches and inspection tools. Ability to accurately complete documentation and follow processes. Effective communication with technicians, service advisors, and management. PHYSICAL DEMANDS & WORK ENVIRONMENT Ability to stand, bend, and move under vehicles for extended periods. Must be able to lift up to 50 lbs. safely. Occasional lifting, standing, crawling, reaching, use of stairs. Occasional attendance at social gatherings. Ability to travel occasionally. CERTIFICATES, LICENSES, REGISTRATIONS Valid Texas Driver's License OTHER REQUIREMENTS Pass Background Check Pass Drug Test 21 Years-Old or Older EMPLOYMENT BENEFITS INCLUDE: Paid Vacation and Holidays 401(K) Vision Insurance Dental Insurance Medical Insurance

Pure Hothouse Foods, marketed under the Pure Flavor brand, is a family of greenhouse vegetable growers who share a commitment to bringing A Life of Pure Flavor™ to communities everywhere. Our passion for sustainable greenhouse growing, strong support for our retail & foodservice customers, and focus on engaging consumers is built on a foundation drawn from generations of growing expertise. We are the next generation of vegetable growers, inspired to put quality, flavor, and customers first by providing greenhouse-grown vegetables from our farms that are strategically located throughout North America. With a dedicated, energetic and highly skilled workforce, we believe our employees make the difference. We offer our employees the opportunity to advance their careers in our progressive, vibrant organization. Job Summary: The Vegetable Inspector (QC) is responsible to assess and report on the quality of all vegetables received, in inventory, and shipped from the facility and ensures that all products shipped meet or exceed customer and regulatory requirements. Responsibilities: Ensure all loads of vegetables arriving at the facility are visually inspected; Perform outbound inspections on shipments Complete QC Inspection Reports for each arriving load, including distressed loads, or any load we deem necessary Ensure all inventory is assessed and is categorized according to its quality and condition Place and release quarantine/on-hold product Conduct outgoing quality checks and/or review the checks conducted by the shippers Regularly inspect finished product and packaging for adherence to standards, when requested or applicable Qualifications: Secondary school education or equivalent required; post secondary education, preferred Minimum (1) year experience as a Vegetable Inspector or Quality Inspector in produce or related industry, preferred Knowledge of Good Manufacturing Practices, Health and Safety, and Food Safety Basic understanding of Fresh Fruit & Vegetable regulations, plus Consumer Packaging & Labeling requirements and standards Computer skills (essential) Proven ability to work in a fast-paced environment, demonstrate keen attention to detail and task-related accuracy Strong verbal and written communication skills Other core expectations as defined by the company Work Environment: Hours of work may vary depending on business needs; flexibility is required This job operates within a refrigerated warehouse, where temperatures range from 45-55°F. The noise level in the work environment can be loud due to packaging machinery, and forklift truck operation. The employee frequently is required to stand; walk; bend; twist; use hands to handle or feel product or packaging; and reach with hands and arms. The position involves walking and lifting, regularly, up to 30-pounds, occasionally up to 50-pounds. Visual requirements. If you are looking for a challenging and rewarding career opportunity, submit your resume to Pure Hothouse Foods today! Pure Flavor Farms is committed to providing an accessible and barrier-free environment. Accommodations are available on request for candidates taking part in all aspects of the selection process. Please contact the Human Resources department if an accommodation is required. Check us out at or follow us on Facebook, Twitter, Instagram or LinkedIn.

TITLE: QC Inspector - HRL REPORTS TO: Manager, QC. The QC Inspector is responsible for performing inspection functions in accordance with Global X's Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role ensures that parts, materials, maintenance, and workmanship meet Global X standards, while monitoring performance measures through audits of internal and vendor organizations. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Perform Line Maintenance, Remain Overnight (RON), and Receiving Inspections (RI). Monitor maintenance, workmanship, and materials for compliance with Global X procedures and FAA standards. Perform RII in-process inspections and ensure proper documentation. Audit completed aircraft records (logbooks, work cards, non-routines, engineering documents, etc.) generated by C-Check, RON, and Line Maintenance. Provide oversight during Heavy or Special Maintenance visits. Perform Borescope inspections within qualified method and level. Ensure accuracy and completeness of all work documents and records. Initiate discrepancies in maintenance logbooks and non-routine forms. Provide “buy-back” of RII and non-RII maintenance actions. Approve return-to-service of maintenance, preventive maintenance, and alterations. Issue Airworthiness Releases (AWR). Reject unsatisfactory work or non-conforming parts per procedures. Prepare and issue audit reports identifying hazards/risks, corrective actions, and track resolution progress. Conduct inspections and audits of contractors/vendors (e.g., repair/overhaul services, contract maintenance, deicing, fueling, and parts distributors). Follow all safety rules to maintain a safe working environment. Perform other duties as assigned by the DOM/DQC. SKILLS AND QUALIFICATIONS: Knowledge of the TRAX system. Valid FAA A&P license, held for at least 5 years. Previous verifiable inspection experience (OJT, training records, certificates, etc.), including RII Authorization. Preferred: prior experience with NDT methods such as Liquid Penetrant, Eddy Current, and Borescope inspections. Strong analytical, problem-solving, and communication skills. Previous experience with aircraft parts and materials handling. WORK LOCATION AND SCHEDULE: This position is based in Harlingen, TX. The standard schedule follows a four-days-on, three-days-off rotation with 10-hour shifts. Work hours and shift assignments may vary, and the schedule is subject to change based on operational needs. Flexibility is required to support the demands of a dynamic aviation maintenance environment. PHYSICAL DEMANDS: The QC Inspector role is performed in a safety-sensitive aviation environment that includes both office settings and aircraft maintenance areas, such as hangars, line stations, and ramp operations. The position requires frequent exposure to varying weather conditions, noise levels, and physical activities associated with aircraft inspections. QC Inspectors must be able to stand, walk, bend, climb, and climb into confined spaces as needed to access aircraft structures and components. The role also involves extended periods of reviewing technical documents and records. Strict adherence to safety protocols and regulatory requirements is essential to maintain a safe and compliant work environment. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.