Quality control analyst jobs in Fords, NJ

Looking for candidates at Chemist I, II and III levels responsible for carrying out analytical method validation/verification activities and testing for Oral Solids, Oral Liquids, Topicals and Powders. MAJOR DUTIES/RESPONSIBILITIES: Develop/Validate/Verify analytical (HPLC, GC, ICP-MS/OES, other) methods for assay and impurities determination in drug substances and drug products. Perform wet chemistry and chromatographic testing for raw materials and products under development phase Perform stability studies for drug products in development phase and generate reports Develop and validate cleaning methods and generated study protocols and reports Prepare relevant protocols, reports, and final methods Maintain proper instrument calibration status Ensure that work is carried out safely and in compliance with the organization's quality system Ensure that quality documentation is generated and updated to reflect current best practice in a timely manner. Perform peer review at Chemist III level, not required if you're applying for Chemist I/II levels. Perform other duties as assigned. MINIMUM/PREFERRED REQUIREMENTS: Education: Bachelor or Master's degree in science or Pharmaceutics. Experience: Bachelor's with 2-7 years of experience in a generic pharmaceutical analytical lab. Master's is preferred. Candidates shall be considered for different positions based on educational qualification and experience. Good understanding of cGMPs is a must for experienced candidates. PHYSICAL DEMANDS/ENVIRONMENTAL CONDITIONS: Laboratory and office environment Able to lift about 25 pounds. Able to stand and or sit for longer period of time. On-site, Full-time, Day Shift

At Corbion, we exist to champion preservation in all its forms, preserving food and food production, health, and our planet. The Quality Control Technician is a 2nd shift position based at the Totowa, NJ plant reporting to the Quality Control Supervisor. This role is responsible for performing daily analytical tests, pre-operation and line audits, and ensuring production procedures and systems are followed. The position ensures that all quality standards are consistently met while supporting the development of QC team members. Essential Functions * Follow all GMP's (Good Manufacturing Practices), FSMA, Safety, and Environmental regulations as well as company policies. * Maintain positive attitude. Focus on the customer, teamwork, and quality productivity. * Give recommendations to improve workplace safety, efficiency, and to better serve the customer. * Analyze finished product for various analytical testing including redox, Chittick, pH, %moisture, color, titratable acid (TA), enzymes, vitamins, proteins, etc., on a daily basis. * Daily verification/calibration of lab equipment prior to testing finished product to ensure product quality. * Maintain the cleanliness of the lab making sure that the areas are clean after testing. * Ensure that lot codes and finished products package is correct and legible. * Product that has been analyzed and does not meet specification, must be re-sampled and re-analyzed immediately. If product is not in compliance, HOLD stickers must be applied immediately and system hold activated. * Participate in and successfully complete all required laboratory training classes. * Complete the picking, testing and approval of raw materials, issuing deviation when the material is out of specification and reporting to the supervisor/manager. * Keeping record of the materials that need to be tested for micro and send the samples on time. * Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Education & Experience * Bachelor's Degree in Chemistry, Bio-Chemistry, Chemical Engineering, Biology or Microbiology. * Experience in a laboratory environment within a related industry is required. * SAP/Sample Manager experience preferred. Knowledge, Skills and Abilities * Strong analytical and problem-solving skills. * Knowledge of laboratory testing procedures and equipment calibration. * Ability to maintain compliance with GMPs, FSMA, HACCP, and company policies. * Strong communication and teamwork skills. Working Environment * Manufacturing plant with large open floor areas and loud machinery. * Exposure to high temperatures in summer and cold environments in winter. * Dusty environment due to raw materials. * Exposure to allergens including eggs, soy, sesame seeds, milk, and wheat. Physical Demands * Must wear GMP-compliant hair and beard nets, company-provided uniforms, gloves, and, in some areas, respirators. * Ability to stand for long periods and perform repetitive laboratory or line auditing tasks. * Must be able to lift up to 55 lbs. Our offer The below reflects the range of possible compensation for this role at the time of this posting. This range may be modified in the future. An employee's position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, performance, location and business or organizational needs. The base salary range for this role is $24.00 to $25.00 per hour. In addition, we offer: * Variable bonus potential * Paid time off, including company holidays * Medical, dental and vision coverage * 401K with company match * Education assistance * Short- and long-term disability * Employee Assistance Program (EAP) About Corbion Corbion is the global market leader in lactic acid and its derivatives, and a leading supplier of emulsifiers, functional enzyme blends, minerals, vitamins, and algae ingredients. We use our unique expertise in fermentation and other processes to deliver sustainable solutions for the preservation of food and food production, health, and our planet. For over 100 years, we have been uncompromising in our commitment to safety, quality, innovation and performance. Drawing on our deep application and product knowledge, we work side-by-side with customers to make our cutting-edge technologies work for them. Our solutions help differentiate products in markets such as food, home & personal care, animal nutrition, pharmaceuticals, medical devices, and bioplastics. In 2024, Corbion generated annual sales of €1,288.1 million and had a workforce of 2,399 FTE. Corbion is listed on Euronext Amsterdam. For more information: *************** Corbion is an equal opportunity employer and committed to a diverse workplace. All applicants will be considered equally without regard to race, color, ethnicity, veteran status, religion, national origin, marital status, political affiliation, age, sex, sexual orientation, handicapping condition, membership in an organization or any other non-merit factors. Corbion provides reasonable accommodation to applicants. EOE/M/F/Vet/Disabled Corbion does not accept unsolicited resumes from individual recruiters or third party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers. All candidates must be submitted by approved Corbion vendors who have been expressly requested to make a submission by our Talent Acquisition team for a specific job opening. No placement fees will be paid to any firm unless such a request has been made by the Corbion Talent Acquisition team and such candidate was submitted to the Corbion Talent Acquisition Team.

Resillion is a strategic partner for quality assurance. We offer worldwide services on the field of quality technology, testing, conformity, interoperability and assurance, from initiation to launch - for the software system, cybersecurity, the device, digital products and media content. With a passion for quality, Resillion provides end-to-end solutions to support customers in their strategic digital initiatives and offers a holistic approach for both software and hardware. Via our office in Europe, the United Kingdom, the USA, India and China, we bring together more than 500 experts who are committed to success. We combine the best human and artificial intelligence (AI) on advanced solutions for quality technology in the liver. Resillion offers deep sector knowledge and works together with the world's leading companies in telecom, media, energy & utilities, health care, finance and consumer electronics. ***************** Job Description Set up playback devices, QC bays and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) Qualifications Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid Clipster proficiency including building. cp files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Basic Minimum Qualifications : 3 to 5 years' experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship. Additional Information Location: New York, NY Employment Type: Part-Time- On as needed basis Schedule: Swing Shift Salary: $25.00-28.00 Per Hour

Job Description Employment Type: Intern Division: Field Operations Department: Quality Salary Range: $23 - $28/hour The Quality Intern supports the Quality department in implementing and monitoring quality management processes across multiple projects in various phases of construction. This role offers broad exposure to construction operations while working closely with Quality Program Managers to uphold and enhance project standards. Responsibilities / Essential Functions Participate in the quality program by attending meetings, performing inspections, and verifying materials. Assist with coordination and content development for Quality pre-operational meetings. Provide technical support on project sites, including interpreting contract drawings and submittals. Develop an understanding of project schedules and critical path activities. Collaborate with Quality Program Managers on initiatives such as drain assembly analysis, finish floor build-up analysis, and water intrusion control planning. Perform other tasks as assigned by the team. Key Skills Excellent written and verbal communication skills. Strong initiative and problem-solving abilities. High attention to detail. Effective time management with the ability to handle multiple responsibilities and meet deadlines. Ability to work in a team environment with a primary focus on collaboration. Required Experience Pursuing a Bachelor's Degree in Construction Management, Engineering, or a related field (preferred). Demonstrated interest in construction management and the construction industry.

Job Description Working days: Mon - Fri Working hours: 10am - 7pm We are looking to hire an experienced diamond professional to join our NYC Office. You will be responsible for quality controlling diamonds and gemstones as well as managing all incoming and outgoing shipments to and from the office. The main goal is to ensure that diamonds come in and out of the NYC office in the shortest delay, while ensuring that all diamonds are up to quality standards. About Nivoda Nivoda's growth trajectory has skyrocketed over the past 12 months, and we continue to expand across new regions at an unprecedented pace. Our DNA centers on understanding our customers' needs and offering them a seamless experience. With a growing team based in major cities worldwide, including London, New York, Hong Kong, and Mumbai, Nivoda is becoming the go-to marketplace for the global jewelry industry. We are bold, innovative, and relentless in our pursuit of excellence as we transform an industry steeped in tradition. What you'll do Quality control diamonds and gemstones Receive consolidated shipments via courier partners Mark orders as received in the Nivoda system. Repack and send orders along to the next destination while updating the Nivoda system. Hand-deliver diamonds to local customers when necessary Collect diamonds from local suppliers, perform quality check and package and ship to the next destination. Create shipments using the Nivoda platform and send labels to suppliers to ensure timely delivery. Liaise with suppliers for shipments and forward invoices to the finance department. Assist customer support with queries related to shipping, order updates and urgent delivery requests. Assist in the smooth overall operation of the office. Support in managing the administrative work related to the office. Follow up with courier partners. Process returned diamond from our customers. Assist and advise other team members and management on the continuous improvement of all the processes of the local office. What you'll need Must have 2+ years of hands on diamond/gemstone experience Must have experience in stock control of high value products. Logistics experience or familiarity with different courier services and tracking systems is useful Attention to detail is a must. Honesty, professionalism, and integrity are essential. Alignment with the Nivoda company values and culture. What you'll get Opportunity to join a fast-growing company at an early stage Unlimited PTO Medical, dental and vision cover

Working days: Mon - Fri Working hours: 10am - 7pm We are looking to hire an experienced diamond professional to join our NYC Office. You will be responsible for quality controlling diamonds and gemstones as well as managing all incoming and outgoing shipments to and from the office. The main goal is to ensure that diamonds come in and out of the NYC office in the shortest delay, while ensuring that all diamonds are up to quality standards. About Nivoda Nivoda's growth trajectory has skyrocketed over the past 12 months, and we continue to expand across new regions at an unprecedented pace. Our DNA centers on understanding our customers' needs and offering them a seamless experience. With a growing team based in major cities worldwide, including London, New York, Hong Kong, and Mumbai, Nivoda is becoming the go-to marketplace for the global jewelry industry. We are bold, innovative, and relentless in our pursuit of excellence as we transform an industry steeped in tradition. What you'll do * Quality control diamonds and gemstones * Receive consolidated shipments via courier partners * Mark orders as received in the Nivoda system. * Repack and send orders along to the next destination while updating the Nivoda system. * Hand-deliver diamonds to local customers when necessary * Collect diamonds from local suppliers, perform quality check and package and ship to the next destination. * Create shipments using the Nivoda platform and send labels to suppliers to ensure timely delivery. * Liaise with suppliers for shipments and forward invoices to the finance department. * Assist customer support with queries related to shipping, order updates and urgent delivery requests. * Assist in the smooth overall operation of the office. * Support in managing the administrative work related to the office. * Follow up with courier partners. * Process returned diamond from our customers. * Assist and advise other team members and management on the continuous improvement of all the processes of the local office. What you'll need * Must have 2+ years of hands on diamond/gemstone experience * Must have experience in stock control of high value products. * Logistics experience or familiarity with different courier services and tracking systems is useful * Attention to detail is a must. * Honesty, professionalism, and integrity are essential. * Alignment with the Nivoda company values and culture. What you'll get * Opportunity to join a fast-growing company at an early stage * Unlimited PTO * Medical, dental and vision cover

The Quality Control Chemist-II is responsible for performing a variety of complex analytical testing, ensuring the quality of dietary supplements and OTC products through testing, documentation, and compliance with regulatory standards. This position also involves reviewing and maintaining SOPs, Testing Procedures, calibrations, and other controlled documents to support quality assurance activities. Additionally, the Chemist-II will assist with troubleshooting and minor repairs of laboratory equipment and support stability testing and documentation. This mid-level position will require more independent work, the ability to mentor QC chemist-I and Lab Tech personnel, and involvement in process improvements and corrective actions. ESSENTIAL FUNCTIONS ( Essential functions, as defined under the Americans with Disabilities Act, may include the following tasks, knowledge, skills and other characteristics. This list of tasks is illustrative ONLY and is not a comprehensive listing of all functions and tasks performed by positions in this class. It does not imply that all positions within the class perform all of the duties listed, nor does it necessarily list all possible duties that may be assigned.) Coordinates with other QC Supervisors and laboratory management so that the shared resources such as laboratory instruments, reagents, etc. are available for assigned staff to perform their job duties effectively and efficiently. Performs the pharmaceutical OTC & Dietary supplement analysis to support OTC & Dietary Supplement manufacturing which includes assay, impurity, dissolution testing, content uniformity, and physical testing. Conduct Analysis in compliance with cGMP requirements, compendia standards, and internal procedures. Maintain accurate record of analysis and perform documentation to company standards Perform laboratory analysis right first time, contemporaneous documentation, analyze and document the results. Notify manager immediately of nonconforming data or unexpected occurrences. Reviews and analyzes the stability samples and associated analytical data, prepares or assists in preparing Stability Summary Reports for Annual Product Review Reports. Reviews/Checks of analytical data by following test methods/SOPs. Performs operational qualification on analytical instruments, analytical method verification/validations, validation protocols and reports for analytical methods. Conducts laboratory investigation (OOS/OOT) under the supervision of laboratory management. Organize work schedule to complete assigned tasks efficiently and on schedule. Work under direction provided by supervisor and other duties as assigned Assist in Training and monitoring of the new hires (trainees) in learning or performing basic skills and assists in evaluating the need of any potential equipment for laboratory. Ensures the laboratory is kept in a safe working environment and in compliance with OSHA and other laboratory safety standards. Maintains knowledge of the latest guidelines of regulatory requirements of International Conference of Harmonization, USP, USFDA and OSHA. Complies with all regulatory/ in-house requirements may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP, cGLP, documentation. Assists in compilation of regulatory documents. Managing the Pharmacopeia changes and up gradation and implementing the same after upgrading the change repeated documents through proper channels of change control and training to all concerned. EXPERIENCE AND QUALIFICATIONS T o perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the experience and education required : EDUCATION & EXPERIENCE o Bachelors degree in Chemistry or related science field with eight (8) to ten (10) years lab experience in a pharmaceutical chemical or related industrial experience; preferably solid dosage forms manufacturing. Method Development experience is preferred. o Masters degree or higher with six (6) to eight (8) years of progressive lab experience in a pharmaceutical chemical or related industry; preferably generic pharmaceuticals. Method Development experience is preferred. o Demonstrated skills and experience in leading a group of QC Chemists. COMPUTER SKILLS o Basic knowledge of computers using MS Office, MS Outlook and business software systems commonly used in the pharmaceutical industry required. MATHEMATICAL SKILLS o Requires a strong knowledge of algebra, calculus and statistics and how they are applied. o Math skills commensurate with scientific background are required. KNOWLEDGE, SKILLS AND ABILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and abilities required : INDUSTRY KNOWLEDGE: Knowledge and experience of applicable FDA regulatory standards and requirements for the solid oral dosage manufacturing required. Knowledge of analysis of pharmaceutical dosage forms and raw materials utilizing HPLC, GC, ICP-MS, UV, TLC, dissolution testing, spectroscopic and wet chemistry techniques is a plus. COMMUNICATION SKILLS: Advance level of written and verbal communication skills with the ability to read, technical procedures or governmental regulations. Ability to write reports, and required documentations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Must possess initiative and trouble shooting ability.

Our client, a world leader in diagnostics and life sciences, is looking for a "Scientist, Quality Control” based out of Branchburg, NJ. Job Duration: Long Term Contract (Possibility Of Further Extension & Conversion) Pay Rate: $39.50/hr on W2 Company Benefits: Medical, Dental, Vision, Paid Sick leave, 401K Responsible for routine Quality Control testing, familiar with basic scientific principles, and able to work in a regulated environment. Responsibilities: Conducts testing/laboratory experiments utilizing established and published procedures or batch records and technical and theoretical understanding while managing schedules and workflow to accomplish assigned objectives or schedules. Assumes responsibility for the accuracy, quality, and timeliness of testing activities. Summarizes batch or experimental results, and reviews conclusions with supervisor/project leader. Communicates results of experiments. Keeps supervisor/project leader informed of work status, particularly of significant findings and results in critical problem areas. Monitor and oversee lab supply inventory, generate expense purchase requisitions, if applicable, input production data and other work-output data into appropriate networks and maintain documentation in accordance with established procedures. Duties may include handling of hazardous materials. Depending upon the area of assignment or primary focus, may perform various manufacturing and testing duties in addition to maintaining departmental stock rooms, log books, and preparing buffers as needed/required. Qualification & Skills: Bachelor's degree in Biological/related sciences or equivalent combination of education and work experience. About 2 years of relevant industry experience in testing and/or manufacturing in a GLP and GMP environment. Experience handling deviations/CAPA preferred. Basic proficiency with MS Word and Excel If interested, please send us your updated resume at hr@dawarconsulting.com/***************************

Are you detail-oriented and passionate about delivering high-quality products? At Hologic, we are seeking a Quality Control Inspector to ensure our products meet the highest standards of quality and compliance. In this role, you'll perform inspections, testing, and sampling procedures for manufacturing processes, packaging lines, and incoming materials. You'll play a key part in maintaining compliance with safety standards, supporting investigations, and driving continuous improvement initiatives. If you have a keen eye for detail, a commitment to excellence, and a desire to work in a collaborative environment, we'd love to hear from you! Knowledge: Familiarity with Good Manufacturing Practices (GMP) and Good Documentation Practices (GDP). Basic understanding of quality control tools, including measuring tapes, calipers, micrometers, scales, gauges, and microscopes. Knowledge of process auditing, documentation, and record-keeping. Ability to read and interpret basic schematics and blueprints. Awareness of FDA-regulated environments and medical device quality standards (preferred). Skills: Proficient in Microsoft Office applications, including Excel, Word, SharePoint, and OneDrive. Strong verbal and written communication skills for accurate documentation and collaboration. High attention to detail and focus on quality assurance processes. Ability to follow written procedures and maintain accurate, organized records. Capable of working both independently and collaboratively as part of a team. Analytical mindset for supporting non-conformance investigations and identifying process improvements. Behaviors: Safety-conscious, maintaining a safe work environment and promptly addressing hazards. Proactive and dependable, with a strong sense of accountability for quality and timelines. Collaborative and team-oriented, fostering positive working relationships. Adaptable and eager to contribute to continuous improvement initiatives like Kaizen events. Reliable and punctual, with a commitment to maintaining attendance and meeting deadlines. Experience: 0-1 years of experience in quality assurance or manufacturing roles, preferably in an FDA-regulated medical device environment. Hands-on experience with quality control tools and techniques is beneficial. Familiarity with clean rooms, controlled environments, and production processes is a plus. Education: High School Diploma (H.S./GED) required; an Associate Degree is a plus. Why join Hologic? We are committed to making Hologic the destination for top talent. For you to succeed, we want to enable you with the tools and knowledge required and so we provide comprehensive training when you join as well as continued development and training throughout your career. The annualized base salary range for this role is $41,200-$61,800 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, education, business needs and market demand. Agency and Third-Party Recruiter Notice Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition, Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans. #LI-NT1

As a QC Chemist, you will be responsible for performing day-to-day laboratory activities under prescribed procedures, including qualitative and quantitative analysis, solution preparation, calibration, qualification, and maintenance of laboratory instrumentation. You will also conduct environmental monitoring, assist with technical writing, and perform administrative tasks. Additionally, you will contribute to solving problems, reviewing experimental data, writing protocols/SOPs/validation reports, and training support staff as necessary. You will monitor study procedures to ensure data accuracy and report quality while maintaining a GMP/GLP laboratory. Responsibilities * Conduct analysis in compliance with cGMP requirements, compendia standards, and internal procedures. * Maintain accurate records of analysis and perform documentation to company standards. * Prepare test solutions, volumetric solutions, and samples used in analysis. * Perform assigned sampling, physical, chemical tests and assays on raw materials, active pharmaceutical ingredients, in-process, finished bulk, finished product, and stability products analysis in an FDA regulated lab environment. * Use a variety of analytical instruments such as HPLC, GC, Dissolution, Malvern particle size analyzer, IR, Auto Titrator, UV Spectrophotometer, KF, Potentiometer, etc. * Perform analysis with a practical understanding of the test procedure and instrument operation. * Conduct laboratory investigations under the supervision of the laboratory manager. * Perform maintenance and calibrations of laboratory instruments/equipment. * Comply with all regulatory and in-house requirements including safety, housekeeping, laboratory chemical waste, cGMP, cGLP, and documentation. * Maintain the required level of training needed to perform GMP tasks. * Prepare and/or review test procedures, SOPs, and protocols as assigned. Essential Skills * Proficiency in current Good Manufacturing Practices (cGMP), FDA, and other regulatory requirements. * Experience with analytical techniques such as Dissolution, FT-IR, GC, UV-VIS, KF, TLC. * Knowledge of computer applications and programs related to laboratory applications such as HPLC, FTIR, TOC. * Familiarity with sampling methods and quality control systems. * Understanding of mathematics including statistics. * Proficiency in sample preparation techniques, spectroscopic techniques, and chromatographic systems. * Basic computer knowledge including MS Word, Excel, and Outlook. * 3-5 years of routine testing using HPLC and Dissolution. * Experience with solid oral dosage and focus on raw material, finished product. * Pharma GMP experience, laboratory, wet chemistry, titration, chromatography. Additional Skills & Qualifications * Bachelor's or master's degree in Pharmaceutical, Biological, Chemical science or related field. * 5-6 years of related laboratory work experience; minimum of 5 years as a QC Chemist in a GMP environment. * Ability to work successfully in both a team/matrix environment and independently. * Ability to work in a fast-paced environment, manage priorities and maintain timelines for multiple projects. * Ability to work safely in a chemical laboratory. * Ability to perform basic calculations, read, write, communicate, and handle stress produced by time pressure, customer demands, etc. * Must be able to access all laboratory, manufacturing, and office areas. * Must be able to wear the required PPE for entering laboratory and processing areas. * Specific vision requirements include reading written documents and using a computer. * Ability to sit or stand for prolonged periods and occasionally lift up to 25 lbs. with or without assistance. Work Environment You will be working in a laboratory setting with approximately 10 people. The laboratory is equipped with modern instrumentation and follows strict safety and regulatory protocols. The work environment requires wearing personal protective equipment (PPE) and involves standing or sitting for prolonged periods. The laboratory operates under a fast-paced and dynamic atmosphere, providing an excellent opportunity for growth and development. Pay and Benefits The pay range for this position is $30.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cranbury,NJ. Application Deadline This position is anticipated to close on Apr 30, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I are embedded into our culture through: * Hiring diverse talent * Maintaining an inclusive environment through persistent self-reflection * Building a culture of care, engagement, and recognition with clear outcomes * Ensuring growth opportunities for our people The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

**General Description:** Perform QC Biochemistry laboratory activities with a primary focus on capillary electrophoresis techniques to support GMP manufacturing, testing, and release of material, intermediates and finished biological products (monoclonal antibodies) under FDA/EU regulations, applicable International Regulations, and BeOne Medicines' processes and procedures. **Essential Functions of the job:** + Perform routine and non-routine testing using capillary electrophoresis techniques (e.g., CE-SDS, CZE, ic IEF) in the QC biochemistry laboratory to ensure timely and compliant generation and reporting of in-process, release, and stability test results in support of manufacturing operations. + Review, interpret, and report analytical data in accordance with GMP regulations and internal procedures. + Lead troubleshooting efforts for analytical methods and instrumentation related to CE. + Conduct laboratory investigations, including OOS, Out of Trend, deviations, and invalid assays. + Implement corrective actions and preventive actions (CAPAs). + Participate in transfer and method validation activities, including protocol preparation, protocol execution, and report preparation. + Support routine operations, including but not limited to instrument qualification and maintenance, SOP generation and revision, test record keeping, etc. + Maintain equipment in a qualified and calibrated state, coordinating with metrology or vendors as needed. + Manage inventory of reagents and supplies for the laboratory. + Participate in internal and external GMP audits, as needed. + Train other junior level analysts and new hires on CE instrumentation, GMP practices, and data analysis. + Serving as subject matter expert in one or more areas of required testing. + Undertake other duties as required. **Core** **Competencies** **, Knowledge, and Skill Requirements** + Bachelor's or above in Chemistry, Biochemistry, or Biotechnology related scientific discipline. + Minimum of 4+ years of GMP testing using capillary electrophoresis techniques in an FDA-regulated biotechnology, pharmaceutical company is required. + Working knowledge and experience with biochemistry analytical methods such as residual DNA by qPCR, host cell protein ELISA, Residual Protein A ELISA, binding activity ELISA, Capillary Electrophoresis (CE), capillary isoelectric focusing (cIEF), etc. + Familiar with Waters Empower Chromatography Data System. + Working knowledge with USP/EP and cGMP/EU GMP regulations. + Familiar with instrument and equipment validation. + Impressive, demonstrable track record and skills/experience gained within a similar position(s), at a similar level. + Strong leadership/team management skills and experience. + Credible and confident communicator (written and verbal) at all levels. + Strong analytical and problem-solving ability. + Hands-on approach, with a 'can do' attitude. + Ability to prioritize, demonstrating good time management skills. + Excellent attention to detail, with the ability to work accurately in a busy and demanding environment. + Self-motivated, with the ability to work proactively using own initiative. + Committed to learning and development. **Significant Contacts** + Interacts with all levels of BeOne employees. **Supervisory Responsibilities:** + N/A All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Quality Control Analytical ScientistAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The QC Analytical Scientist will be a member of the Quality Control Department. As a Senior Member of the team the QC Analytical Scientist will be involved in various QC projects and should have a deep understanding of general QC flow and the Product Cycle. Support internal and external customers to ensure that proper and timely execution of all aspects of the clinical analytical method life cycle across clients. Support routine GMP testing as assigned. Mentor and train team members Evaluate corporate and regulatory requirements along with coordination of activities for implementation of these requirements. Write the contents of Analytical Method Transfer and Validation life cycle documentation including master plans, protocols, test methods, and reports. Create validation project plan i.e., timelines and resources and provides status updates to management. Utilize statistical tools for evaluation of method validation and trending data. Identify, evaluate, and implement continuous business process improvements. Perform troubleshooting activities with respect to methods/assays, equipment malfunctions and investigations (Deviations and OOS). Provide support during laboratory investigations. Train QC personnel during method transfer and validation. Provide support during equipment qualification. Consistently produce elevated level of documentation accuracy and clarity according to cGMP documentation practices. Ability to set deadlines and prioritize work for self, group members, and support groups involved. Ability to review/approve work performed by coworkers for accuracy and alignment with procedures. Indirectly may supervise cross functional teams including product development, QA, PMP, and Manufacturing. REQUIREMENT B.S Analytical Chemistry or other scientific field or MS/Ph.D. in Analytical Chemistry or other scientific field with demonstrated experience in Quality Control laboratories for biotechnology products. 8-10 years of experience in the areas of method development, validation, and transfer. Direct GMP Experience. Proficiency in project management skills and tools. Strong background and in-depth knowledge in analytical chemistry e.g. Flow Cytometry, ELISA, HPLC, CE, PCR, etc. Extensive knowledge and experience of QC assay development, transfer and validation, along with cGMPs. Strong Quality orientation with attention to detail required. Analytical and problem-solving skills required. Excellent communication skills, both written and verbal, with all levels of the organization, including the ability to state opinions clearly, ask questions, seek clarification, communicate facts objectively, challenge when appropriate, and pursue issues to resolution. Excellent presentation skills. Ability to communicate to upper management, across departments and within the immediate QC team. Ability to create and manage work plans and timelines and independently manage competing priorities with limited instruction. Highly motivated individual with good interpersonal skills that have proven effective in managing relationships and negotiating solutions while maintaining a level of approachability with colleagues both internal and external. Must be familiar with GMP lab environment and Aseptic techniques. Working EnvironmentMust have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays, or overtime and as required by the company May be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen Must have the ability to work with specialized equipment Must be able to handle the standard/moderate noise of the manufacturing facility May work with hazardous materials and chemicals Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

A primary focus of this role is creating and modifying LIMS test plans to support QC activities while adhering to regulatory and data integrity guidelines. The LIMS Coordinator is responsible for tracking and managing laboratory inventories within the LIMS system and to perform and verify daily verification of laboratory data for accuracy and completeness, ensuring compliance with GxP standards before submission for review. Essential Functions: * Register samples and input relevant test results, instrument data, and laboratory information into the LIMS system as per QC procedures. * Manage laboratory inventories, ensuring timely replenishment and accurate record-keeping within the LIMS system as well as generate and run standard reports from the LIMS system for Laboratory Resource tracking. * Perform and verify daily verification data for accuracy and completeness before submitting it for review. * Create, troubleshoot and modify LIMS Test, worksheets, and test plans as needed to support QC activities. * Train new peers in LIMS operations, including sample manager and resource modules. * Assist QC personnel with sample registration and label generation using the LIMS software Additional Responsibilities: * Performs other functions as required or assigned. * Hands on to follow compendial (USP/EP/BP/JP) procedures for wet chemical tests. * Must understand and apply cGMP requirements applicable to quality control laboratory. * Follow up on sample status and testing progress within the LIMS system. * Participate in continuous improvement initiatives to optimize LIMS functionality and workflows.

Northern Architectural Systems (“NAS”) is a growth-minded, locally owned and operated company which is dedicated to servicing our customers. We offer high quality, energy-efficient fenestration and building facade solutions to meet the requirements of a demanding market, while remaining environmentally-friendly. Northern Architectural Systems has been recognized by INC Magazine on the list of the top 5000 Fastest Growing Private Companies in America and as one of the top 50 Fasted Growing Companies in New Jersey by NJBIZ Magazine Overview: We are looking to fulfill our need for a Quality Control (QC) Assistant at our Teterboro, NJ facility. Full-time position: Hours 7 am - 3:30 pm (Monday - Friday) Overtime when needed. Applicants from NJ with their own reliable transportation preferred. Requirements Essential Duties and Responsibilities (other duties may be assigned): Must be willing and eager to learn. Learn how to check received product/raw materials. Learn how to inspect manufactured products which includes final inspection of finished products prior to shipping. Assist with product testing. Create and build wooden buks to test our products. Assist with the installation of our product into the buks for testing purposes. Able to learn and become familiar with NAS's various product models. Must be hands-on and a hard worker. Maintain a clean, safe work environment. Able to work in extreme temperatures. Comfortable working in a diverse environment. Must have the following skills: No degree necessary (high school diploma or equivalent preferred) Growth Opportunity Operate Power Tools (power drill, power saw, etc.) a plus Able to use a level and a square a plus The ability to lift 50+ lbs. Attention to detail and well organized Blueprint reading a plus Benefits Full-time position Hourly Rate Range: $18.00 - $23.00/hour Medical, dental and vision benefits offered 401(k) Offered PTO (Paid Time Off) Employee Training

Our client is seeking Full -Time Clinical Lab Technologists for their Chemistry Lab! Full time - Alternate Weekends 11:30 pm - 8:00 am 10% night shift differential!! Perform routine and emergency tests on blood and other body fluids using a variety of automated and manual instrumentation promptly. Maintain equipment and records according to department procedures and regulatory agencies guidelines in the areas of QA and QC. Use independent judgment to solve technical and procedural problems. In some instances, the ability to stand or sit for extended periods of time is necessary. Pay Range based on experience: $82,979.96 - $103,286.06 Requirements Must have an active New York license At least 2 years of work experience preferred Bachelor's Degree in physical science, medical technology preferred. Benefits 1199 Members Medical & Dental 403B matching up to 8% of salary Room for Growth Great leadership and support, utilizing the latest advances in computer technology.

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Our Dayton, NJ laboratory is seeking an entry-level Lab Technician I to join their General Chemistry team! The Lab Technician I will prepare samples with accuracy and precision in accordance to SGS' analytical SOPs. Work independently and as part of a team to meet daily production targets and ensure hold times and turnaround times are met. Always follow safe laboratory practices and maintain a safe working environment. Job Functions * After appropriate training independently prepare samples for analysis according to SGS' analytical SOPs using basic instrumentation specific to the department and analytical methodologies * Performs routine operation, maintenance, calibration of prep instruments/equipment * May assist with validation and MDL studies. * Inputs and maintains technical information as needed to support the laboratory functions/operations. * Maintains Laboratory Notebook where applicable. * Adheres to internal standards, policies, and procedures. * Performs other duties as required. Qualifications * High school diploma (Required) * 0-2 years of experience in Analytical Chemistry Laboratories or prior experience working with one's hands (Required) * Associates Degree in a Chemistry or similar scientific discipline (Preferred) * 1-2 years of years' relevant experience in Analytical Chemistry Laboratories (Preferred) * Language Skills: English (Required) * Mathematical Skills: Basic (Required) * Reasoning Skills/Abilities: Basic (Required) * Computer Skills: Basic (Required) * Ability to lift/carry/push and/or pull upwards of 25 lbs on a frequent basis (Required) Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Medical Laboratory Technologist to work in the Chemistry/Core Laboratory under the direct supervision of supervisor. Will be responsible for performing a variety of complex and routine test within the Core Laboratory complying with all safety and regulatory requirement. Rotate weekends and scheduled holidays base on the needs of the department; participate in interdepartmental collaboration within the institution, to provide the highest quality patient care.

Working days: Mon - Fri Working hours: 10am - 7pm We are looking to hire an experienced diamond professional to join our NYC Office. You will be responsible for quality controlling diamonds and gemstones as well as managing all incoming and outgoing shipments to and from the office. The main goal is to ensure that diamonds come in and out of the NYC office in the shortest delay, while ensuring that all diamonds are up to quality standards. About Nivoda Nivoda's growth trajectory has skyrocketed over the past 12 months, and we continue to expand across new regions at an unprecedented pace. Our DNA centers on understanding our customers' needs and offering them a seamless experience. With a growing team based in major cities worldwide, including London, New York, Hong Kong, and Mumbai, Nivoda is becoming the go-to marketplace for the global jewelry industry. We are bold, innovative, and relentless in our pursuit of excellence as we transform an industry steeped in tradition. What you'll do Quality control diamonds and gemstones Receive consolidated shipments via courier partners Mark orders as received in the Nivoda system. Repack and send orders along to the next destination while updating the Nivoda system. Hand-deliver diamonds to local customers when necessary Collect diamonds from local suppliers, perform quality check and package and ship to the next destination. Create shipments using the Nivoda platform and send labels to suppliers to ensure timely delivery. Liaise with suppliers for shipments and forward invoices to the finance department. Assist customer support with queries related to shipping, order updates and urgent delivery requests. Assist in the smooth overall operation of the office. Support in managing the administrative work related to the office. Follow up with courier partners. Process returned diamond from our customers. Assist and advise other team members and management on the continuous improvement of all the processes of the local office. What you'll need Must have 2+ years of hands on diamond/gemstone experience Must have experience in stock control of high value products. Logistics experience or familiarity with different courier services and tracking systems is useful Attention to detail is a must. Honesty, professionalism, and integrity are essential. Alignment with the Nivoda company values and culture. What you'll get Opportunity to join a fast-growing company at an early stage Unlimited PTO Medical, dental and vision cover

Job Title: QC Scientist IJob Description Join our team as a QC Scientist I working on the second shift from Sunday to Thursday. You will perform fit-for-purpose testing to support manufacturing, including in-line and finished product release testing using various analytical techniques. Your work will be essential in ensuring the quality of our products. Responsibilities * Perform fit-for-purpose testing following operating procedures. * Prepare standards and samples for analysis and run instrumentation with minimum supervision. * Document and report analytical testing data in LIMS Database and in a laboratory notebook following good documentation practices. * Assist in out-of-specification investigations by performing relevant testing and documenting appropriately. * Make recommendations regarding opportunities to optimize instrumentation methods and provide general feedback on non-instrumentation method opportunities. * Apply knowledge of Lean Six Sigma Processes focusing on supporting continuous improvement activities. * Maintain general lab housekeeping. * Engage in process improvement initiatives to identify cost savings to the business. * Perform additional tasks as assigned by the Supervisor. Essential Skills * Bachelor's degree in Analytical Chemistry, Organic Chemistry, Biochemistry, Biology, or related field from an accredited university. * Minimum of 1 year (2 years preferred) of industry or other relevant market experience, preferably in the chemistry or bio/pharmaceutical industry. * Hands-on experience with wet chemistry and basic analytical instruments. * Familiarity with Analytical test methods including ACS, USP/NF, EP/BP, JP, FCC. * Strong computer, scientific, and organizational skills. * Excellent communication skills (oral and written) with attention to detail, including problem-solving. * Familiarity with reviewing laboratory notebooks and understanding testing performed using various Analytical Chemistry Techniques and instrumentation. * Effective problem-solving abilities using Lean methods. Additional Skills & Qualifications * Familiarity with Lean Six Sigma Processes. * Ability to lift up to 40lbs. Work Environment Work in a GMP Lab environment on a contingent basis, with responsibilities scheduled from Sunday to Thursday during the second shift. The role involves active participation in process improvement activities to support continuous improvement and cost savings. Job Type & Location This is a Contract position based out of Fair Lawn, NJ. Pay and Benefits The pay range for this position is $36.00 - $36.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Fair Lawn,NJ. Application Deadline This position is anticipated to close on Dec 31, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.