Quality control inspector jobs in Alliance, OH - 133 jobs

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

OGS Machining is a CNC Job Shop that is currently looking for a full-time Quality Inspector position for 3rd Shift. Standard shop hours are (4) ten-hour days Mon-Thurs. 3:30PM 2:00am, with occasional overtime on Fridays as needed. OGS Machining is a medium-volume, production job shop whose average machining order is 100 - 500 pcs. 75% of our jobs are made from bar stock with the remaining 25% are machining castings or billet. All parts can easily be held in your hand, no cranes or material handling equipment are necessary. The majority of our CNC turning equipment is less than 4 years old, and state-of-the-art. OGS Industries is seeking a Quality Inspector at our OGS Machining location to ensure customer satisfaction through compliance of internal and external customer imposed quality control requirements. Essential Duties Understand and follow OGS quality system requirements. Review and understand customer requirements. Provide documentation and results during Receiving, Layout, In-process, and Final Inspection. Document SPC as needed to support quality efforts. Follow Inspection Plan Documents (IPDs) that provide a basis for making quality decisions in accordance with customer requirements and OGS procedures. Use approved gauging and measurement techniques. Properly use inspection equipment, product inspection techniques, system software, and follow established OGS quality system procedures, and work instructions. Perform calibration activities and maintain calibration system as required. Equipment Used Wide variety of mechanical inspection-type measuring equipment, (i.e., dial/digital micrometers, calipers, height gages, CMM, optical comparator, hardness instruments Skill Requirements High School graduate or equivalent required. A minimum of five (5) years Quality Control/Assurance Inspection experience is required. Helpful if qualified candidate would be able to operate manual CMM and Optical Comparator. Basic understanding of precision machining operations (milling and turning machines). Drawing interpretation including GD&T. Knowledge of non-destructive and destructive testing and measuring techniques. Knowledgeable in the applications and requirements of ISO 9001, AS9100, IATF14949 Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time. OGS Industries is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. NO PHONE OR THIRD PARTY CALLS PLEASE PI090973a7b8e2-31181-39428472

Job Description Quality Inspector at ARE-Massillon OH Plant (1st Shift 5:00am - 3:30pm Monday-Thursday) About Real Truck RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, Real Truck's 5,000+ associates operate from 72 facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 850 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships. For more information, visit ****************** Pay and Benefits: RealTruck offers competitive pay and the opportunity for an annual increase, based on job performance A 401k savings program with a company match to plan and save for your retirement 10 paid holidays and paid time off to ensure time with your family and a work/life balance Discounts on great RealTruck products for you, your family, and friends We reward great talent referring great talent with our Employee Referral Bonus program We are an equal opportunity employer with a commitment to diversity. All individuals, regardless of personal characteristics, are encouraged to apply What does your career journey look like? Do you have a high school diploma or equivalent and have a commitment to working safely? We will teach you everything you need to know. Be rewarded for good attendance and hard work with advancement opportunities (and pay raises) through promotions and career development opportunities over time. Primary Responsibilities: Ensures product compliance with standards at multiple stations throughout the shop. Verifies unit meets product specification sheet standards. Identify parts and location placement of components. Completely check entire unit for quality issues per documented best practices (work instructions). Document each unit into the data tracking database. Completes additional tasks as assigned. Minimum Qualifications: High School Diploma/GED or equivalent preferred. Proficient oral and written communication skills. Basic computer and math skills. Basic Expectations: Ability to follow work instructions. Safely operate a power industrial truck and/or aerial work platform Maintain a valid power industrial truck license. Ability to learn and understand the manufacturing process. Adhere with all company policies, procedures and trainings. Maintains a safe, clean work environment; address any unsafe conditions or behaviors with a supervisor. Completes all required records, reports, and forms in a neat, accurate and timely fashion. Seeks to always improve materials processes, product quality, and worker safety. What's next? Please take a moment to complete our online application. Check us out at ******************** About RealTruck RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck's 6,000+ associates operate from 35+ facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

The Quality Technician is responsible for ensuring that all finished products meet quality standards and customer specifications. This role involves conducting inspections, performing tests, documenting results, and working closely with production teams to identify and resolve quality issues. You have the responsibility as an employee at Akro-Mils to make a good quality product to exceed our customer expectations. You have the authority and responsibility to initiate recommendations to resolve problems and continuously improve our Quality Management. Total Quality Management involves all employees at Akro-Mils to be dedicated to participating in improving our processes, our products, and our culture. Quality product starts and ends with you! Take pride in your work by providing a clean & functioning product for our customers. Duties and Responsibilities Quality Inspection & Testing: Perform in-process and final inspections of plastic components to ensure compliance with specifications. Use measuring tools such as calipers, micrometers, gauges, and CMMs to verify dimensions and tolerances. Conduct visual inspections to identify defects such as flash, short shots, sink marks, and contamination. Perform functional and durability tests as required. Process Monitoring & Documentation: Monitor production processes to ensure consistency and adherence to quality standards. Record test results, non-conformances, and corrective actions in quality databases. Maintain accurate and organized inspection reports, control plans, and other quality documents. Defect Investigation & Problem Solving: Work with production and engineering teams to identify the root cause of defects and recommend corrective actions. Support corrective and preventive action (CAPA) initiatives. Participate in internal and external audits to ensure compliance with plant and customer requirements. Compliance & Continuous Improvement: Ensure compliance with company and industry quality standards. Assist in the implementation of quality improvement initiatives such as 5S, Lean, and Six Sigma methodologies. Provide feedback and recommendations to improve product quality and reduce waste. Education and Experience High school diploma/GED One to three month's related experience and/or training; preferred, or equivalent combination of education and experience Computer proficiency (Word & Excel); required Ability to read, understand and use calipers and other test and measuring equipment; required 2 years, or more production experience; preferred Ability to read and interpret documents, such as safety rules, operating and maintenance instructions, and procedure manuals Ability to speak effectively to employees of organization Ability to do two mathematical operations to arrive at the solution Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form Physical Demands The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to walk, climb, or balance, and talk or hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and depth perception. Work Environment The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is usually exposed to fumes or airborne particles. The employee is regularly exposed to moving mechanical parts. The employee is regularly exposed to heat and cold and the risk of electric shock. The noise level in the work environment is usually loud.

**Now hiring! QC Lab Technician - Monaca, PA** **Pay Range: $25.00-26.00/ hr. / Night Shift differential / Performance Incentive Bonus/ Full Benefits Package / 401k Options** We are looking for a **Quality Control Lab Technician** to join our **Dispersions team** in **Monaca, PA.** **Come create chemistry with us!** **During your rotating 12-hour shift as a QC Lab Technician, you will** **Principal Responsibilities** + Actively supporting and promoting a safe working environment, participating in all safety trainings and programs, and supporting Environmental, Health, Safety, and Security plant initiatives. + Using a variety of testing equipment including GCs, HPLC, FTIR, Spectrophotometers, Viscometers, Ovens, balances, pH meters, Microscopy, LIMS & SAP data systems. + Using appropriate software to evaluate data based on internal and external specifications, procedure requirements, and LIMS programming, as well as entering information into SAP software. + Quality assurance testing of in-process and finished latex products within the scope of the BASF Quality Policy and ISO 9001 Quality Management System which includes testing using pH, viscosity, gas chromatography, and other analytical techniques. Other testing as required including waste water samples. + Performing bacteria testing + Supporting the continuous improvement of lab and plant processes through QA/QC activities, instrument troubleshooting and maintenance, and meeting/exceeding customer expectations. + Interacting with the Supply Chain and Operations departments at the Monaca site to expedite shipments to customers utilizing SAP + **Available to work rotating 12 hour shifts 7:30am-7:30pm and vice versa and overtime when needed** **Process Safety Management Responsibilities** + Process safety roles and responsibilities across the organization are clearly defined and include an expectation to raise, and authority to respond to process safety concerns. Employees understand the importance of process safety as it applies to their jobs and are responsible for following and contributing to the work processes to achieve improvement in company process safety performance. **Formula for Success ...** + 2 yr Associates degree or technical degree in Chemistry/Analytical testing OR related field with lab experience **OR** High School Diploma/GED with minimum 2+ years of relevant industrial lab experience required. + Experience working in a manufacturing environment on a 12 hour rotating shift + Experience with Microsoft Office products; Word, PowerPoint, Excel and ability to operate various computer-controlled instruments. + Knowledge of testing equipment found in laboratory setting; GCs, HPLC, FTIRS, Viscometers + Basic understanding of general chemistry, techniques of quality assuarance and quality control + Basic understanding of math, statistics, analytical methodology, insight into problem solving, and ability to record and report pertinent data. + On occasion, must be able to lift up to a maximum of 30 lbs. + Must be able to follow both written procedures, verbal instructions and follow all applicable safety procedures including correct personal protective equipment. + Willing and available to work **rotating 12 hour shifts (7:30am-7:30pm and vice versa)** and overtime when required **Preferred Skills** + Experience working in an ISO or GMP compliance driven lab environment + Experience with emulsion polymerization products, laboratory testing and practices + The preferred candidate will have minimum 2+ years' experience in a lab position of increasing responsibility. \#dispersionsresins&additives **Create your own chemistry with you@BASF** At BASF, you will have the chance to do meaningful work towards building a more sustainable future. In addition to competitive compensation and benefits, BASF provides you with access to a wide range of elements to help you be your best. It's what we call **you@BASF** . We are committed to providing benefits, programs, and opportunities that support our employees' overall well-being, personal growth, and a safe, collaborative, and inclusive work environment. Just some of the many benefits we offer include: + Flexible work arrangements whenever possible + Highly competitive retirement savings plan with company match and investment options + Well-being programs that include comprehensive mental health support for you and your household family members + Family forming benefits (fertility, adoption and surrogacy reimbursement, maternity/parental leave, and more) + Back-up child and elder care with discount programs for families of all ages and stages + Mentoring and career development opportunities that allow you to share, learn, and thrive + Matching gifts program that allows you to deepen the impact of your contributions to qualified charities. + Employee crisis support for when the unexpected happens + Access to our BASF wine cellar, employee discounts, and much more! **About us** As one of the largest chemical companies in North America we have been finding solutions for your everyday needs and addressing the most complex economic, environmental, and sustainability challenges for more than 150 years! At BASF we empower our employees with the tools, guidance and opportunities they need to advance and succeed in work and life. Giving you the support you need to be your best and fulfill your personal ambitions is what helps us create chemistry. After all, our success is linked to yours. Whatever path you envision, BASF is a great place to build a rewarding, successful career. Belong to Something Bigger. #belongat BASF **Privacy statement** BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ***************************** to report fraud. **Equal employment opportunities** We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. Applicants must be currently authorized to work in the United States on a full-time basis.

Job Title: Quality InspectorJob Description We are seeking a diligent Quality Inspector to join our team. This role involves inspecting various components throughout the production process, ensuring adherence to quality standards, and maintaining organized records of inspection results. The position is initially a 6-month contract with the potential for a direct hire opportunity. Responsibilities + Inspect incoming, in-process, and final assembly components. + Use micrometers and calipers to take precise measurements. + Assist in calibrating inspection tools and gauges. + Document inspection results and maintain quality records. + Maintain organization of non-conforming materials. Essential Skills + 1 to 2 years of experience in quality inspection and measurements. + Proficiency with measurement tools such as micrometers and calipers. + Experience in blueprint reading and interpreting drawings. + Strong problem-solving and communication skills. Additional Skills & Qualifications + Experience in the aerospace industry. + Knowledge of Geometric Dimensioning and Tolerancing (GD&T). Work Environment This role involves working primarily on the shop floor within the production area. It is a hands-on position requiring the use of measuring tools and equipment to perform inspections across three key areas: machined parts, paint, and assembly. Quality checks are essential at each stage to ensure compliance with standards. Job Type & Location This is a Contract position based out of Strongsville, OH. Pay and Benefits The pay range for this position is $23.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Strongsville,OH. Application Deadline This position is anticipated to close on Jan 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. SUMMARY: The Quality Control Inspector is to inspect the quality of the grating for all specified jobs. This requires knowledge of the job travelers that show quantity, grating type, material type, finish, and any special quality notes. The QC inspector will have knowledge of galvanizing quality, on-grip process, and quality, as well as acceptable manufacturing standards. The QC inspector will be required to know and implement the NAAMM standards. Quality Control Inspector in assigned Business Units. Work with all levels of the organization including, the Business Unit Manager, Supervisors, and Associates to create a smooth, defect-free process. Sample production from every station to significantly reduce/eliminate escapes from your assigned Business Unit. Approve and/or perform first-article inspections on a job requiring this level of oversight. Assure all associates are trained/certified (if required) to operate to perform the tasks they are being asked to perform. Assist in the training, development, and/or creation of proper training materials as required. Perform any required QCHECKs in the Business Unit. The measurement of effectiveness will be a reduction of IRRs in the Inspector's assigned Business Unit and no escapes from the Inspector's assigned Business Unit to other areas. Inspect output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality. Using gauges such as tape measure, calipers, and micrometers to measure products and assure Quality is built into the product. Reviewing blueprints and specifications to compare to produced goods. Check that the production line adheres to standards and procedures and complies with the Customer standards. Ask the Question: "Is there an SOP for this Process". Record inspection results by recording job numbers of inspected parts, summarizing issues and actions taken to keep production running with no significant pauses in the process. Use iAuditor to record the jobs inspected. Significant reworks, re-makes, and wastes will be input to the IRR System as needed. Helping train the production team on quality control measures to improve product excellence. Assist Associates in Transaction Control (Epicor). Help Associates attain defect-free entries. Monitor transactions to verify that the Associates are performing the task as required. Propose improvements to the production process. Assisting in the development of test methods and inspection plans. Help determine the causes of product defects and reworks. During product inspections, verify all equipment is calibrated correctly. Monitor the scrap hoppers three times during your shift and advise of any abnormalities. When needed, assist in the Sales Order Deviation Process. Always review issues immediately with the Business Unit Manager, Supervisors, and Quality Manager. This job description does not describe all activities, duties, responsibilities, or physical demands that are required of the employee for this job. Likewise, the work environment described is merely representative. Duties, responsibilities, activities, physical demands, and work environment may change at any time with or without notice. ESSENTIAL DUTIES/RESPONSIBILITIES: Read travelers to ensure quantity, grating type, material type, finish, and any special quality notes are accurate. Inspect the quality of grating for all specified jobs. Reject any product that is not within specifications. Work with Production to repair the product if possible. Document non-conformance and report/return to the business unit or origin. Implement NAAMM standards. Support correction as needed. Knowledge of IRR process. Evaluate internal processes and suggest ideas for improvement. Update IRR process documents as changes occur. Review sales order packets using the five-point checklist application. Back up Quality Assurance as needed. Performs other related duties as assigned. EDUCATION, WORK EXPERIENCE, AND PROFICIENCIES: Requires a high school diploma or equivalent is required. The candidate must have strong computer skills in Microsoft Office Suite (Word, Excel, and Outlook). In addition, one or more years of experience with a manufacturing facility. The candidate must have excellent reasoning skills, be detail-oriented, accurate and complete assignments on time with little supervision. Must take initiative and be a self-starter. Must have knowledge of galvanizing quality, on-grip process, and quality as well as acceptable manufacturing standards. Experience with ERP systems and knowledge of internal processes and procedures is preferred. EEO STATEMENT: Ohio Gratings, Inc. is an equal opportunity employer and affords equal opportunity to all applicants without regard to race, color, religion, gender, national origin, age, disability, veteran status, or any other characteristic or status protected under local, state, or federal laws.

A Quality Inspector is responsible for ensuring that products or services meet established quality standards and specifications. They perform visual, mechanical and electrical inspections, tests, and audits to identify any defects or deviations from quality requirements. Quality Inspectors use various tools and techniques to measure and evaluate the quality of materials, components, and finished products. They document and report any non-conformities and work closely with production teams to address quality issues and implement corrective actions. Additionally, they may participate in the development and improvement of quality control processes and procedures. Supervision: Essential Responsibilities Perform visual, mechanical and electrical inspections, and testing of all equipment manufactured at Powell facilities according to Powell Standards. Program and operate electronic equipment such as microprocessor-based relays. Energize Powell electrical products and other buyout equipment such as service Panels, HVAC, Battery Chargers, UPS System, etc. Perform equipment failure investigations and root cause analysis. Complete and maintain all test Quality Control documentation as required. Perform maintenance on test equipment as needed. Perform tests using equipment such as multi meter, clamp-on-meter, voltage detector, Hi-Pot, etc. Interaction with all departments (shop, engineering, sales, shipping, fabrication, PCR, switchgear) including customers to work to resolve quality related issues. Interaction with all departments during production, final inspection and final release to shipping is required. External relationships may include regular interaction with other Powell subsidiaries, suppliers and customers. Record Engineering and Shop discrepancies, non-conformities and material shortages utilizing Powell systems. Participates in continuous improvement projects. Promote a safety culture as well as attend all safety meetings. Ensure quality by following standard work instructions and identifying any potential risks to product quality. Ensure that work areas remain clean and well organized. Learn and understand basic electrical principals and relevant Mechanical experience. Minimum Qualifications High School Diploma or General Education Diploma, or a Trade School diploma or certificate Minimum 1-3 years' experience in manufacturing environment. Ability to read prints including specification sheets, wiring diagrams, schematics, three-line drawings, wiring lists and part drawings. Preferred Qualifications Experience in Quality inspection for electrical or electronic equipment or components preferred Intermediate experience working with industry codes and standards and able to refer to applicable codes. Skills, Abilities & Other Requirements Ability to apply industry standards as applicable to job and product. Actively seeks out self-development through internal or external programs that contributes to knowledge, skill and abilities. Demonstrates integrity and ethical decision making. Conscientious, thorough, accurate, and reliable when performing and completing job tasks. Able to work effectively within a team and around other departments and their activities. Ability to learn and adhere to all manufacturing policies and practices to ensure adherence to ISO requirements. Must be proficient in the English language, both written and verbal. Working & Environmental Conditions Working Conditions Safety sensitive position in a temperature-controlled manufacturing or industrial environment with occasional outside activities. Required to always wear personnel protective equipment (i.e., hard hats, safety glasses, hearing protection, safety harnesses and respirators) when required. Working at a desk and computer in an office environment is required. Must be able to work from all types of ladders (step ladders, "A" frame ladders and all size extension ladders) and scaffolding. Working at heights usually no higher than 30 feet in the air or using proper lift equipment. Physical Requirements Able to maintain body equilibrium and agility to prevent falling when walking, standing, crouching, ascending or descending stairs. Bending the body at the waist, the legs at the knees, and extending arms and hands in any direction in a repetitive manner continuously. Continuous standing, walking 50-300-foot distances for long periods of time with only occasional sitting. Must be able to climb stairs frequently throughout the shift. Able to frequently look over shoulders, work with both arms above shoulders and use both arms at full length frequently. Using upper extremities to apply or exert a force continuously up to 50lbs. Ability to use hand tools such as tin snips, hammer, and power tools (some vibrating), for long periods of time with frequent repetition. More Information This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties.

Job Title: Fire Protection QC Inspector - Kitchens & Fire Extinguishers Location: Akron, OH Silco Fire & Security isn't just a company, it's a mission. Every day, our team plays a vital role in protecting lives and property for over 45,000 businesses across Ohio, Kentucky and surrounding states. We design, install, maintain and monitor fire protection and security systems that keep people safe and businesses compliant. As the market leader in the Midwest, Silco is a growing, family-owned company with over 500 employees working from our headquarters in Cincinnati and branches in Dayton, Columbus, Toledo, Akron, Cleveland and Louisville. Recognized as a Top Workplace and named to the Inc. 5000 list of fastest-growing private companies, we have a long-standing track record of success and ambitious goals for the future. Our impact extends beyond fire alarms and sprinklers. We provide peace of mind to the communities we serve. At Silco, you're not just doing a job, you're making a difference. Position Overview: We are seeking a highly skilled and experienced Quality Control Inspector with a minimum of 5 years of expertise in the fire protection industry. The ideal candidate will play a crucial role in ensuring that our products and installations adhere to the highest standards. Responsibilities: Conduct Quality Inspections: Performing Quality Checks on inspections that have been performed on Kitchen Fire Protection Systems and Fire Extinguishers Ensure that inspections and installations comply with state and NFPA codes and regulations. Documentation and Reporting: Maintain detailed records of inspection findings, documenting any deviations or non-compliance issues. Generate comprehensive reports daily that will be distributed to employees and their managers. Collaboration: Work closely with Operation Managers, Supervisors, and service and installation teams to address quality concerns, provide guidance on corrective actions, and improve our quality standard. Provide consultations with techs and suggested follow up training when needed. Continuous Improvement: Participate in the development and implementation of quality control procedures and protocols. Identify opportunities for process improvements to enhance overall efficiency and effectiveness. Training and Development: Provide training to inspection teams on quality control standards, best practices, and regulatory requirements. Stay informed about industry advancements and changes in codes and standards. Qualifications: Minimum of 5 years of experience within the fire protection and life safety systems industry. Experience with Kitchen Suppression Systems and Fire Extinguishers is preferred. In-depth knowledge of relevant codes and standards (i.e. NFPA, local building codes). Strong attention to detail and excellent analytical skills. Ability to work independently and collaboratively within a team. Benefits: In addition to a competitive compensation package, Silco offers a wide range of benefits such as medical, dental, vision, Aflac and a Flexible Spending Account (FSA). Silco offers company paid short-term disability and life insurance, as well as company paid training. The Company also boasts a 401(k) program with company matching and tuition reimbursement. Silco provides paid holidays and generous paid time off. Employment at Silco is contingent upon completing and passing a background check and drug screen. Silco is an Equal Opportunity Employer.

Quality Inspector at ARE-Massillon OH Plant (1st Shift 5:00am - 3:30pm Monday-Thursday) About Real Truck RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, Real Truck's 5,000+ associates operate from 72 facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 850 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships. For more information, visit www.realtruck.com. Pay and Benefits: RealTruck offers competitive pay and the opportunity for an annual increase, based on job performance A 401k savings program with a company match to plan and save for your retirement 10 paid holidays and paid time off to ensure time with your family and a work/life balance Discounts on great RealTruck products for you, your family, and friends We reward great talent referring great talent with our Employee Referral Bonus program We are an equal opportunity employer with a commitment to diversity. All individuals, regardless of personal characteristics, are encouraged to apply What does your  career journey look like? Do you have a high school diploma or equivalent and have a commitment to working safely? We will teach you everything you need to know. Be rewarded for good attendance and hard work with advancement opportunities (and pay raises) through promotions and career development opportunities over time. Primary Responsibilities: Ensures product compliance with standards at multiple stations throughout the shop. Verifies unit meets product specification sheet standards. Identify parts and location placement of components. Completely check entire unit for quality issues per documented best practices (work instructions). Document each unit into the data tracking database. Completes additional tasks as assigned. Minimum Qualifications: High School Diploma/GED or equivalent preferred. Proficient oral and written communication skills. Basic computer and math skills. Basic Expectations: Ability to follow work instructions. Safely operate a power industrial truck and/or aerial work platform Maintain a valid power industrial truck license. Ability to learn and understand the manufacturing process. Adhere with all company policies, procedures and trainings. Maintains a safe, clean work environment; address any unsafe conditions or behaviors with a supervisor. Completes all required records, reports, and forms in a neat, accurate and timely fashion. Seeks to always improve materials processes, product quality, and worker safety. What's next? Please take a moment to complete our online application. Check us out at www.4are.com/careers About RealTruck RealTruck is the premier manufacturer and digital destination of accessories for truck, Jeep , Bronco and off-road enthusiasts around the world. Globally headquartered in Ann Arbor, Michigan, RealTruck's 6,000+ associates operate from 35+ facilities across four continents. RealTruck's industry leading product portfolio, which includes the Husky Liners total vehicle protection brand, boasts over 1,000 patents and pending applications. The company's omni-channel retail approach delivers a seamless consumer experience online at RealTruck.com, as well as through its 12,000+ dealer network and automotive (OEM) partnerships.

For more than 125 years, Gregory Industries has built a legacy that goes beyond metals and manufacturing steel products. Through a commitment to quality and constant drive to improve, we lead the industry with people and processes that exceed expectations. Learn how our roll-formed steel products can help support your business needs. Quality Inspector Summary: The Quality Inspector ensures ISO compliance and handles day-to-day quality issues. Job Core Responsibilities: Ensure production compliance with applicable requirements during processing. Identify holds, rejects, release and reapply nonconforming material. Handle customer complaints and claims. Enforce set established quality parameters. Promote positive customer relations. Maintain calibration log. Manage daily in-house testing. Assist in maintaining WIP material. Skills: Strong analytical skills. Detailed oriented. Ability to multitask and remain focused. Personable and adept at dealing with customers. Strong knowledge of steel and galvanizing (defects). Physical and mechanical testing background. Uphold strict quality standards. Knowledge and understanding of current ISO 9000 standard. Experience 2-3 years manufacturing quality experience. These job functions are not intended to be all-inclusive. Changes in functional assignments may occur, as business needs dictate. Benefits offered include, but are not limited to: Paid Time Off and paid holidays. 401k with company match. Medical, dental & vision benefits. Company paid life insurance, short term disability & long-term disability. Onsite fitness facilities. Discretionary profit-sharing bonus program. Gregory Industries is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

Job Description LMT Mercer Group, Inc was formed in 1987 and supplies the vinyl and wood composite fence and deck industry with high quality component parts. Work to maintain LMT's high quality standards. Ensure that all parts produced and shipped, are of the highest quality, and meet or exceed all quality specifications. Job Duties: Perform 1st Piece inspection Read specifications Monitor operations to ensure that they meet production standards Recommend adjustments to the assembly or production process Inspect, test, or measure materials or products being produced Measure products with rulers, calipers, gauges, or micrometers Accept or reject finished items Use proper scanning procedures for all products and ensure scanning accuracy. Remove all products and materials that fail to meet specifications Discuss inspection results with those responsible for products Report inspection and test data Use computer to look up inventory transactions, relevant documentation and for communication Experience: Quality Control: 1 year (Preferred) 1 year Manufacturing environment, or similar experience, preferably in Plastics Powered by JazzHR YhDEYYM0fB

Job Description Altronic LLC provides innovative engineering and solutions for natural gas-fueled engines and manufactures high quality, high value, and reliable products. With approximately 200 employees, we are dedicated to delivering excellence in our products and services. We are currently seeking a Quality Inspector to join our team in Girard, Ohio. Responsibilities: Perform functional testing of electronic assemblies per written work instructions Log test data including non-conformances and defects into database systems Utilize electronic test equipment including but not limited to Digital Multimeters, Oscilloscopes, Function Generators, Temperature Simulators, etc. Report repeat-failures to Supervisors for Quality reviews Ensure that products meet regulatory, safety, and internal quality standards Work with cross-functional teams as necessary including engineering, manufacturing, and supply chain to discuss failure modes during functional testing Work overtime as needed per company policy Perform other duties as assigned Technical knowledge: Effective problem-solving skills Basic use of electrical/electronic test equipment Ability to read and interpret Engineering Assembly Drawings Ability to work with in Windows based PC environment (Linux is a plus) Working knowledge of Manufacturing Processes/Equipment (preferably in Electronics) Ability to read and follow documented work instructions and test procedures Experience and Essential requirements: Associate's degree in Engineering or Engineering Technology- preferably in electrical/electronic engineering OR equivalent experience 5+ years' Quality Inspection Experience- Ideally electronics manufacturing background ISO 9001 standards and quality management systems Must be organized and able to multi-task Excellent time management skills Strong computer skills including quality applications, word processing, spreadsheets, and databases Strong verbal and written communication skills SAP experience a plus Benefits: Embark on a dynamic career with opportunities for advancement at Altronic. Our comprehensive benefits package includes medical, dental, and vision insurance, FSA & HSA options, disability coverage, life insurance, paid time off (vacation and sick days), parental leave, tuition reimbursement, and a 401(k) Retirement Plan with matching contributions. Altronic is an Equal Opportunity Employer, maintaining a Drug-Free Workplace and utilizing E-verify for verification purposes. Take the first step in your professional journey with us!

Description: OGS Machining is a CNC Job Shop that is currently looking for a full-time Quality Inspector position for 3rd Shift. Standard shop hours are (4) ten-hour days - Mon-Thurs. 3:30PM - 2:00am, with occasional overtime on Fridays as needed. OGS Machining is a medium-volume, production job shop whose average machining order is 100 - 500 pcs. 75% of our jobs are made from bar stock with the remaining 25% are machining castings or billet. All parts can easily be held in your hand, no cranes or material handling equipment are necessary. The majority of our CNC turning equipment is less than 4 years old, and state-of-the-art. OGS Industries is seeking a Quality Inspector at our OGS Machining location to ensure customer satisfaction through compliance of internal and external customer imposed quality control requirements. Essential Duties Understand and follow OGS quality system requirements. Review and understand customer requirements. Provide documentation and results during Receiving, Layout, In-process, and Final Inspection. Document SPC as needed to support quality efforts. Follow Inspection Plan Documents (IPD's) that provide a basis for making quality decisions in accordance with customer requirements and OGS procedures. Use approved gauging and measurement techniques. Properly use inspection equipment, product inspection techniques, system software, and follow established OGS quality system procedures, and work instructions. Perform calibration activities and maintain calibration system as required. Equipment Used Wide variety of mechanical inspection-type measuring equipment, (i.e., dial/digital micrometers, calipers, height gages, CMM, optical comparator, hardness instruments Requirements: Skill Requirements High School graduate or equivalent required. A minimum of five (5) years Quality Control/Assurance Inspection experience is required. Helpful if qualified candidate would be able to operate manual CMM and Optical Comparator. Basic understanding of precision machining operations (milling and turning machines). Drawing interpretation including GD&T. Knowledge of non-destructive and destructive testing and measuring techniques. Knowledgeable in the applications and requirements of ISO 9001, AS9100, IATF14949 Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time. OGS Industries is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. NO PHONE OR THIRD PARTY CALLS PLEASE

We don't like to brag, but we've crafted solutions for real-world bath and home needs for almost 100 years. Since our modest start in 1929, Mayzon has compiled a long list of firsts in manufacturing, production, design and marketing innovations for our homes. But we're about much more than the past. Looking toward a brighter tomorrow, we've committed to innovate using sustainable methods and environmentally friendly practices whenever possible. So, yeah, maybe we do like to brag a little. A lot of companies say it, but we mean it: At Mayzon, our people are our best asset. We are growing! We empower our team members to be creative problem solvers. We provide tools, training and an environment to help them thrive. We're not perfect. But we're happiest when our people have an impact on our customers' lives. We offer great benefits! BC/BS for medical, dental, & vision. 11 paid holidays. Bonuses (Referral, sign-on, quarterly)..... Please ask. Department: Quality Control Shift: 2nd Shift FLSA Status: Non-Exempt Reports To: Quality Manager / QA Supervisor Position Summary The Quality Control Inspector is responsible for performing in-process and final inspections of manufactured and purchased components to ensure compliance with engineering specifications, customer requirements, and internal quality standards. This role supports defect reduction, process compliance, and continuous improvement within a high-volume manufacturing environment. Qualifications Essential Duties and Responsibilities Perform in-process and final inspections of assemblies, materials, packaging, and finished goods in accordance with written inspection procedures, work instructions, and sampling plans Review and interpret engineering drawings, specifications, bills of material (BOMs), work orders, and quality documentation Conduct first article, first-run, random, and hourly inspections per quality standards Use measuring and inspection equipment including tape measures, digital calipers, gauges, meters, and scales Identify, document, and report nonconforming material using Defective Material Reports (DMRs) Verify material availability and accuracy during production set-up and changeovers Assess aesthetic and functional quality, determine defect classification, and quantify defect levels Stop or escalate production activity when major non-compliance or quality risks are identified Communicate quality issues to Quality, Engineering, and Production leadership in a timely manner Support rework, sorting, containment, and corrective action activities Participate in quality improvement initiatives, audits, and investigations Maintain accurate inspection records and quality documentation Perform additional duties as assigned to support operational and quality objectives Required Qualifications High School Diploma or GED required Minimum 3-5 years of experience in a manufacturing quality, inspection, or production environment Ability to read and interpret engineering drawings and inspection instructions Proficient in the use of mechanical measuring devices Basic computer proficiency (data entry, inspection records, reports) Strong attention to detail with solid analytical and problem-solving skills Basic math skills and accurate color vision Ability to stand, walk, bend, and inspect products for extended periods Preferred Qualifications Prior experience with in-process inspection, final inspection, or quality auditing Experience in assembly, plastics, metal, or consumer product manufacturing Familiarity with sampling plans, quality standards, and corrective action processes Competencies Quality-focused and detail-oriented Clear written and verbal communication Ability to work independently and collaboratively Organized with strong documentation discipline Comfortable working in a fast-paced production environment Work Environment & Physical Requirements Manufacturing environment with exposure to noise, moving equipment, and production lines Standing and walking for extended periods Manual handling of parts and inspection tools Occasional off-site work may be required Equal Employment Opportunity Statement The Company is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable law.

The Quality Inspector plays a critical role in ensuring that all products meet the company's high standards for quality and precision. This position involves inspecting components and finished products, identifying defects, and ensuring compliance with customer specifications and industry standards. Minimum Qualifications Education: High school diploma or equivalent; technical certification or associate degree in a related field preferred. Experience: 2+ years of experience in a manufacturing or quality inspection role. Knowledge: Familiarity with ISO 9001:2015 and AS9100D requirements preferred Familiarity with either IPC/WHMA-A-620 preferred Familiarity with AS9102 First Article Inspections preferred Skills: Strong understanding of precision measurement tools and techniques. Proficiency in reading and interpreting engineering drawings and blueprints. Excellent attention to detail and organizational skills. Effective communication skills and ability to work collaboratively in a team environment Ability to work in high mix, low volume environment Job Responsibilities Perform detailed inspections of incoming materials, in-process components, and finished products using precision measuring instruments (e.g., calipers, micrometers, tape measures). Interpret engineering drawings, blueprints, and specifications to ensure products meet design requirements. Identify and document non-conforming materials or products and provide feedback to operators. Maintain accurate inspection records Conduct First Article Inspections (FAI) in accordance with company and industry standards. Monitor and enforce compliance with customer workmanship standards. Participate in root cause analysis and recommend solutions to prevent recurring issues. Other duties as required Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. About 603 Manufacturing Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule. 603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Seaman Corporation is a manufacturer of high-quality industrial coated fabrics, based in Northeast Ohio for over 75 years. Our manufacturing facility promotes a collaborative and innovative atmosphere, and we celebrate our team-based approach. Manufacturing is the core of our business. We are currently looking for Final Inspectors on 3rd shift, 11:00p-7:00a. As of February 1, 2026, we will transition to a 24/7 rotation with a 4:3 schedule. Must be able to work within that schedule. Day shift will be 7a-7p; night shift will be 7p-7a. What we offer: Medical/Dental/Vision, beginning the first day of employment 401k with company match, after 30 days 10 Paid Holidays Opportunities for overtime and advancement $300 sign-on bonus Annual and quarterly bonuses based on company performance Education & Experience: HS Diploma/GED required Previous manufacturing experience preferred Some computer skills preferred All candidates will be required to successfully complete the following: Work-Keys Assessments Drug Screening Criminal Background Check

Company Overview: Champion Personnel is currently seeking experienced Final Inspectors for our client located in Streetsboro, Ohio. Our client designs and manufactures best-in-class power quality products including Static Transfer Switches, Power Distribution Units and Remote Power Panels. Position Overview: A Final Inspector will be responsible for ensuring products leaving the facility have met all quality standards. Responsibilities: Follow 3D model to install final parts (i.e. cover panels, labels, etc.) on power cabinets Use standard hand tools (i.e. drill, wrench, screwdrivers, etc.) to complete tasks assigned Clean all power cabinets, inside and outside before they are shipped to customers. Check all computer documentation of prior departments for accuracy. Adhere to safety protocols and maintain clean and organized work area. Assist in other tasks in the Staging Department as needed. Requirements: Basic knowledge of standard hand tools (i.e. drill, wrench, screwdrivers, etc.) Basic computer skills (i.e. web browser, email) Strong organizational and time management skills Attention to detail and ability to accurately verify and label materials Ability to work in fast-paced environment Handle multiple tasks simultaneously Previous experience in final inspection, material handling, or warehouse operations Communication skills Problem solving and critical thinking skills Physical Requirements: Must be able to lift up to 25 pounds Ability to stand for an extended period of time Must be able to bend, squat, kneel, or climb a stepladder while working Manual dexterity and good hand-eye coordination Additional Details: Shifts available: 1st- 6am to 2:30pm M-F, 2nd- 2pm to 12:30am M-Thurs Starting pay is based on experience. $20-21 per hour. Company offers 100% paid medical benefits Equal Opportunity Employer Statement: We are an Equal Opportunity Employer and do not discriminate based on race, ancestry, national origin, color, religion, sex, age, marital status, sexual orientation, disability, veteran status, or any other protected classification under the law.

Battle Motors prides itself on delivering efficient, effective solutions for the heavy-duty work truck industry. With the evolution of our new EV (Electric Vehicle) technology, we are growing faster than ever. At Battle Motors, we believe the most fulfilling place to work is where extraordinary people collaborate to solve difficult problems. As a Quality Inspector, you will be responsible for inspecting the quality of medium-heavy duty truck chassis manufactured at our plant. You will perform visual and functional inspections, identify defects and non-conformities, and report them to the VP of Service. You will also verify the compliance of the products with the specifications, standards, and customer requirements. You will work in a team-oriented environment, following the quality procedures and policies, and ensuring the safety of yourself and others. This position will adhere to the Battle Motors Environmental Health and Safety Program by following all safety rules, procedures, practices, training, and safe use of equipment; this includes use of personal protective equipment (PPE) as required. This individual will work in a way that stresses the importance of preventing injury, accidents, or illnesses to themselves or co-workers by correcting or reporting unsafe situations, incidents, or occurrences to their Supervisor immediately. Battle Motors is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, age, national origin, or any other status protected under federal, state, or local law.