Quality control inspector jobs in Claremore, OK

for a Quality Gate Inspector at International Motors. The role involves the operation of vehicles and equipment, the use of power tools, and/or the handling of hazardous materials. Due to the critical nature of these duties, which are essential for maintaining quality and production standards, strict adherence to safety protocols is required to mitigate the risk of injury, property damage, or disruption to the manufacturing process. Schedule: Monday Through Thursday 5:00 AM - 3:30 PM OR 4:30 AM - 3:00 PM (Shift will be decided based on need of the company) Pay Rate: $23.56 per hour Responsibilities Responsible for supporting the quality department in manufacturing at the plant level by auditing buses utilizing Tulsa Bus Plant Process Standards to identify defects and readiness for customer delivery. Responsible for evaluating, validating, and making judgment calls as to any quality defects on the buses as they progress through the manufacturing line. * Work with production team members to identify quality defects. * Work with production to obtain daily quality and production goals. * Validate rework on units prior to unit acceptance. * Evaluate and audit bus units for acceptance to Tulsa Bus Plant standards. * Perform housekeeping to maintain safety in the area. * Perform other duties and activities as assigned. Minimum Requirements * At least 1 year plant manufacturing experience * At least 3 months quality experience Additional Requirements * Qualified candidates, excluding current employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. We do not anticipate providing employment related work sponsorship for this position (e.g., H-1B status) * Understanding of ISO principles * Ability to walk/stand up to 10 hours per day * This position is safety sensitive and may involve the operation of vehicles, operation of equipment, and/or involve work with power tools, or handling of hazardous materials, that could result in injury or damage to person/property/manufacturing process Desired Skills * Positive attitude, ethics and International's values which support our company's values, and a healthy, high performance culture * Strong Communication skills both written and oral * Self-motivated with ability to work under pressure * Ability to review audits with all levels of the Assembly Team * Computer skills including Excel and Word * High School Diploma or GED preferred Benefits and Compensation We provide a competitive total rewards package which ensures job satisfaction both on and off the job. We offer market-based compensation, health benefits, 401(k) match, tuition assistance, EAP, legal insurance, an employee discount program, and more. You can learn more about our comprehensive benefits package at ******************************************** Company Overview ABOUT TRATON With its brands Scania, MAN, International, and Volkswagen Truck & Bus, TRATON SE is the parent and holding company of the TRATON GROUP and one of the world's leading commercial vehicle manufacturers. The Group's product portfolio comprises trucks, buses, and light-duty commercial vehicles. "Transforming Transportation Together. For a sustainable world.": this intention underlines the Company's ambition to have a lasting and sustainable impact on the commercial vehicle business and on the Group's commercial growth. ABOUT INTERNATIONAL From a one-man company built on the world-changing invention of the McCormick reaper in 1831, to the 15,000-person-strong company we are today, few companies can lay claim to a history like International. Based in Lisle, Illinois, International Motors, LLC* creates solutions that deliver greater uptime and productivity to our customers throughout the full operation of our commercial vehicles. We build International trucks and engines and IC Bus school and commercial buses that are as tough and as smart as the people who drive them. We also develop Fleetrite aftermarket parts. In everything we do, our vision is to accelerate the impact of sustainable mobility to create the cleaner, safer world we all deserve. As of 2021, we joined Scania, MAN and Volkswagen Truck & Bus in TRATON GROUP, a global champion of the truck and transport services industry. To learn more, visit ********************** * International Motors, LLC is d/b/a International Motors USA in Illinois, Missouri, New Jersey, Ohio, Texas, and Utah. EEO Statement We are an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email ********************* to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About This Role: As our Quality Control Technician focused on switchboard testing, you will be instrumental in guaranteeing the quality and operational readiness of the electrical distribution systems that power our cutting-edge AI infrastructure. You will be responsible for executing comprehensive testing protocols for switchboard assemblies at various stages of production. Your understanding of electrical testing principles, safety regulations, and switchgear functionality will be essential in identifying and mitigating potential issues before deployment. This role requires a proactive and detail-oriented individual with strong analytical and problem-solving skills, coupled with a solid background in electrical testing and quality control within a manufacturing environment. You will collaborate closely with engineering and production teams to ensure adherence to specifications and maintain the highest levels of product quality. This is a full-time position where your expertise will directly impact the reliability and safety of our mission-critical infrastructure. What You'll Be Working On: Switchboard Testing and Inspection: Execute comprehensive testing procedures for switchboard assemblies, including but not limited to visual inspections, electrical continuity tests, insulation resistance tests, functional tests, and operational checks. Test Procedure Execution: Follow detailed test procedures and checklists to ensure consistent and thorough evaluation of switchgear performance against engineering specifications and industry standards. Electrical Testing and Verification: Execute electrical testing procedures, including continuity testing, insulation resistance testing, functional testing, and other relevant electrical tests to ensure switchboard meets performance specifications and safety requirements, energized functionality testing. Test Equipment Management: Ensure that all electrical testing equipment is properly calibrated, maintained, and operated according to safety guidelines. Test Equipment Operation and Maintenance: Proficiently operate various electrical testing equipment (e.g., multimeters, megohmmeters, Hi-Pot testers) and ensure proper calibration and maintenance of this equipment. Data Acquisition and Reporting: Accurately record and document test data, identifying trends, discrepancies, and potential failure points. Generate clear and concise test reports summarizing findings. Non-Conformance Reporting: Document any test failures or non-conformances, and collaborate with engineering and production teams to support root cause analysis and the implementation of effective corrective and preventive actions. Quality Standards and Compliance: Ensure all testing activities adhere to relevant industry standards, safety regulations (e.g., NEC, NFPA 70E, UL 891, IEEE, ANSI), and internal quality management system requirements. Cross-Functional Collaboration: Work closely with electrical engineering, manufacturing, and quality assurance teams to resolve testing issues, provide feedback on design for testability, and contribute to continuous improvement initiatives. Training and Guidance: Provide training and guidance to production personnel on basic quality checks and testing procedures related to switchgear assemblies. Documentation Control: Maintain accurate and organized records of all test procedures, test results, and calibration records. Other Duties: Undertake other quality-related tasks and projects as assigned to support overall operational efficiency and quality objectives. What You'll Bring to the Team: Education: Minimum High School graduate or GED; Associate's or Bachelor's degree in Electrical Engineering Technology or a related field is preferred, and equivalent field experience will be considered. Experience: Minimum of five years' experience in electrical testing and quality control roles, with a strong focus on testing medium and/or low voltage switchgear assemblies. Electrical Testing Knowledge: Thorough understanding of electrical testing principles, methodologies, and safety practices. Switchboard Familiarity: Comprehensive knowledge of switchgear components, functionality, and relevant industry standards (e.g., NEC, NFPA 70E, UL 891, IEEE, ANSI). Technical Proficiency: Demonstrated ability to interpret and understand electrical schematics, wiring diagrams, and technical specifications. Test Equipment Expertise: Hands-on experience operating and maintaining various electrical testing equipment. Computer Skills: Proficient in basic computer applications, including Google Suite (mail, drive, docs, sheets) and Microsoft Office (Word and Excel). Physical Requirements: Ability to perform physical tasks associated with testing and inspection, including standing, walking, bending, and lifting components as needed. Requires good manual dexterity and visual acuity for detailed inspection and operation of test equipment. Safety & Compliance: Willingness to strictly adhere to all safety regulations and participate in required safety training programs. This position is located in a safety-sensitive facility and may require participation in drug and alcohol programs. Company Values Alignment: Your personal values resonate with Crusoe's core principles. Soft Skills: Exceptional attention to detail and a strong commitment to electrical safety and product reliability. Excellent analytical and problem-solving skills for diagnosing and resolving electrical issues. Strong communication and interpersonal skills to effectively collaborate with cross-functional teams. Bonus Points: Certifications related to electrical testing or quality control (e.g., NETA certification). Experience with automated testing systems. Knowledge of data acquisition and analysis software. Experience in a manufacturing environment with high-reliability electrical equipment. Familiarity with root cause analysis and corrective action processes for electrical failures. Benefits: Hybrid work schedule Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300/month Compensation Range Compensation will be paid in the range of up to $23 -$30/hr + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Allient Inc. is in growth mode and currently seeking a Quality Control Technician to join our team in Tulsa, Oklahoma! The Quality Control Technician performs inspections, checks, tests, and samplings on all incoming materials, parts and components used in the manufacturing of products provided by our company. Responsibilities: * Performs inspections of purchased parts, subassemblies and finished goods (including FAIs) according to well defined criteria using standard physical, mechanical, and/or electrical measurements. * Inspects, reworks, or rejects subassemblies or finished products as required. * Conducts and documents process and system audits using written procedures as audit standards. * Accurately documents the results of each inspection and testing. * Coordinates and/or performs calibration of test equipment and fixtures. * Reads and interprets engineering drawings and material specifications. * Maintains detailed records describing and verifying completion of all required quality inspections. Minimum Qualifications: * Associate's Degree in engineering or a technical discipline. In lieu of a degree, equivalent number years of experience is required. * 0- 2 years of related experience required. * Knowledge of dimensional metrology, along with the technical skills to perform basic mechanical inspection and gauging operations. Basic understanding of GD&T (ASME Y14.5) a plus. * Solid computer skills include MS Office Physical Demands: * Good manual dexterity and eye/hand coordination. * Required to stand, walk, and sit and requires some lifting in excess of 25 pounds. * May use manufacturing equipment and machines that requires personal protective equipment Work Environment: * This position operates in both the office environment as well as the production floor. * While on the production floor, employee may be subjected to moving mechanical parts and may be required to put on precautionary, protective wear such as goggles. * Some travel may be required. To learn more about Allient, visit our website at *************** * Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. The world's leader in innovative, energy solutions, Solar Turbines, is looking for experienced Inspectors to manage quality control processes at our Broken Arrow, or Claremore facility. The Inspector will manage in depth analysis and documentation using vernier, dial and digital calipers, surface plates, micrometers and gages. The primary responsibility will be managing the inspections of diaphragms, veins, sand plates, nozzle casings, nozzle support rings and various other critical engine components. Candidates shall perform detailed inspections and complete job documentation using the following, but not limited to: * Vernier, dial & digital calipers * Surface plates * Gage blocks & length standards * Bore gages (all types) * Tube, blade, groove and depth micrometers * Thread plug gages, ring gages * Height gages * Radius gages * Conduct Deburr Checks Minimum Qualifications: * High School Diploma, GED or equivalent. * 1-3 years of experience with quality assurance, mechanical inspection or machining experience from a precision manufacturing environment. Preferred Qualifications: * Possess experience or willing to learn Coordinate Measuring Machine (CMM) operations. * Proficient Geometry and Trigonometry skills. Summary Pay Range: $23.53 - $35.29 This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as H, L, TN, F, J, E, O. Posting Dates: December 15, 2025 - January 4, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Distribution Inspector 3Location: Tulsa, OKKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards.Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities.Ensure all inspections meet or exceed industry regulations and standards.Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection.API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting.Strong communication skills with the ability to work effectively in a team environment. C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry.

Job Title: Quality Control Inspector Reports to: Quality Manager Classification: Non-Exempt Safety Sensitive: Yes R&A Form: Quality Inspector The Quality Inspector plays a crucial role in ensuring our products meet the highest standards of quality and compliance with industry standards throughout the production process. This person will serve as a hands-on resource for our production teams, providing interpretation and guidance on compliance standards. The Quality Inspector will work closely with the Quality Manager, Quality Lead and production teams to uphold Fiber Pad and our customers' quality standards. This role is performed under established guidelines and criteria. RESPONSIBILITIES/ESSENTIAL FUNCTIONS Conducts routine inspections of in-process and completed parts for production teams, utilizes manual measuring practices for precise specifications. Verify part to print accuracy for Shipping & Receiving. Complete First Article Inspections and paperwork. Read and understand complex blueprints. Verify stock to engineering revision changes. Utilize measurement tools such as calipers to assess product dimensions and tolerances. Maintain quality systems in accordance with AS9102 standards. Reports on and speak to quality metrics for management review. Collaborate with cross-functional teams to identify areas for improvement in processes and product quality. Provide training and guidance on quality standards to production staff. Document non-conformances and assist in the development of corrective action plans. Additional duties as needed or assigned by management. Adhere to safety protocols while handling materials and operating equipment. Assist in all phases of housekeeping to keep the facility clean and organized to help maintain a neat and tidy work area. Perform other duties as needed or assigned by leadership. Requirements REQUIRED QUALIFICATIONS Minimum of 1 year of Proven experience in a Quality Control or Quality Assurance role within a manufacturing environment. Ability to use all measuring tools, read and decipher detailed measurements on blueprints. Ability to read GD&T prints and perform manual measurements frequently to complex specifications. Knowledge of AS9100 Quality System, AS9102 FAI paperwork, First Article Inspection. CMM knowledge strongly preferred. Strong analytical skills with the ability to interpret data effectively. Experience conducting quality audits and implementing quality management systems. Proficiency in using measurement tools such as calipers and gauges. Excellent attention to detail. Ability to work collaboratively in a team-oriented environment while maintaining independence when necessary. Strong communication skills, both verbal and written. Basic computer skills, familiarity with MS products is a plus Excellent organizational skills to manage multiple tasks effectively in a fast-paced environment. High level of dependability regarding attendance and punctuality. Ability to collaborate and work well within a team environment, and willingness to motivate and support others, supporting the Core Values of Fiber Pad. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: Ability to use hands including fingers to hold, touch, see, feel, grip, squeeze, push and pull. Ability to perform pushing, pulling, forward exertion on a regular basis. Ability to see near and far, utilize peripheral vision and depth perception for tasks being performed. Ability to have overhead extension with arms on a regular basis Ability to use enhanced levels of manual dexterity with arms and hands to operate taping and packaging materials, forklifts regularly and industrial power tools occasionally. Ability to stand and walk continuously on concrete floor for 10-hour shifts Ability stand, crouch, stoop, bend, kneel and squat frequently. Ability to climb ladders frequently. Ability to work from elevated surface such as a ladder frequently. Ability to bend and twist at the hip and waist area on a regular basis Ability to rotate neck to look backwards, up, down and sideways on a regular basis Ability to regularly lift and or move 45-55 lbs. Ability to understand and communicate verbally, in person and over paging system Ability to meet requirements of and utilize all PPE when required EDUCATION: High School Diploma or equivalent required. ENVIRONMENTAL CONDITIONS The environment described here is meant to be representative of those an employee would normally encounter while performing the essential functions of the job. The physical environment requires the employee to work inside in heat/cold, with exposure to production noise. Required to use PPE while performing job functions. SPECIAL JOB DIMENSIONS Work involves overtime and could involve schedule changes based on company need. Requires adherence to deadlines and project completion deadlines. Salary Description $20-$24 + $1/hr Night Shift Differential

Job DescriptionQuality Control Inspector II Pay Rate and Hours: Pay: $24/hr Hours: Monday through Friday, 7:00 am to 4:30 pm The Quality Inspectors are responsible for providing Quality support for the maintenance and documentation of tools and equipment for the Services Group. Supporting receiving inspections, work order inspections, first article inspections, and final inspections. Quality Inspectors are also responsible for making accurate assessments of the conformance of parts and materials which are suspect. Quality Control Inspector II Overview: Responsible for inspecting all products related to HPES (incoming inspection, production inspection, finished goods before delivery and pre and post maintenance) and providing technical guidance to the Production and Services staff. Key Responsibilities Quality Control Inspector II Primary duties may include, but are not limited to: Supports the quality department by performing and recording inspections Ensure processes and procedures are adhered to Ensure traceability is maintained throughout assembly and maintenance of tools / equipment. Confirm documentation is maintained properly Establish non-conformity reports when necessary Responsible for the necessary administration by maintaining various databases, reports and files to support the QC function Take all the actions to keep tools and instruments in conformity with the ISO procedures and QA/QC recommendations Suggests and discusses with the Quality Manager improvements on processes, equipment and tools Ensures that products containing non-conformity are under control by placing non-conforming products into quarantine area Provides and archives technical data (codes and standards) and records to increase customer satisfaction Provide technical assistance (defect detection, acceptance and rejection) to the manufacturing department by auditing the assembly process Quality Control Inspector II Experience: Experience in assembly process (as inspector) is a very good asset Experience in Quality Control is required Quality Control Inspector II Knowledge, Skills, and Abilities: Good knowledge in machine design, assembly, machining, drawings and QC activities Open to learn new technical tools like 3D arm, PMI, OES device Good organization skills, flexible, stress resistant and team spirit Rigorous, accurate and reliable Key Personnel Benefits While on Key Personnel's payroll, you can access Key's benefits package, including health, dental, vision, accident, critical illness, term life, short-term disability, PTO, and more! Only qualified applicants will be contacted to make the best use of your time. Apply online at *************** today! Our office is at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I-9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.53627084

Job DescriptionDirect Hire Opportunity Quality Control Inspector (Weld Inspector) - NIGHTS-$24+(Hourly)(2-3 years minimum experience) Carries out inspection and test activities in accordance with established quality plans, engineering specifications, and procedures in order to verify that the specified requirements for the product have been met. Monitor overall construction performance regarding technical quality and compliance with design and specification requirements. Performs dimensional and visual inspection and/or testing of materials and products to determine compliance. Records the results, which provide evidence that the product has been inspected and/or tested. These records should show clearly whether the product has passed or failed in accordance with established criteria. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering drawings and Customer specifications. Run tests, keep record of defects, analyze products and oversees procedures. Must have working knowledge of all industry welding codes and standards including American Society of Mechanical Engineering, Boiler and Pressure Vessel Code Section VIII and National Board of Inspection Code for Repairs and Alterations of Pressure Vessels. Working knowledge of Nondestructive Examinations, Heat Treating, Paint and Protective Coatings. Must be able to use a variety of precision and non-precision inspection and test equipment. Inspector is expected to interface with Manufacturing and Engineering personnel and provide support, if necessary, in interpreting and defining product quality criteria. This position may also require operating overhead or jib crane. Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. High school diploma or GED. Experience with calibration of inspection and test equipment preferred. Experience in an ISO 9001 environment preferred.

WILL TRAIN ON DAY SHIFT, EVENUALLY GO TO NIGHT SHIFT EXPERIENCED QUALITY INSPECTOR FOR CHECKING PARTS FORMED OFF THE LASER TABLE, PLASMA TABLE AND PRESS BRAKE. 10 HR. SHIFTS READ MICS AND CALIPERS TAPE MEASURE WITHIN THE 16TH READ BLUEPRINTS. WORK HOURS: 7:00AM-3:30PM $19.00-$20.00 HR. WEST TULSAWORK HOURS: 6:00AM-3:30PM WILL TRAIN ON 1 ST SHIFT AND EVENTUALLY GO T O NIGHT SHIFT

Compensation: $32.19/hr ST, $48.29/hr OT Aerospace sheet metal and composite experience preferred. In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Principle Duties and Responsibilities: Essential Functions: Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD, and verify paperwork. Witness, verify, and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA-approved procedures. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees' health and safety, product safety, and promotes risk reduction; participate openly in safety-related event investigations and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: Provide technical support to manufacturing personnel. Perform area inspections to ensure compliance with applicable standards and specifications. Participate in continuous improvement activities. Perform other duties as assigned. Job Requirements: High School Diploma or GED required. 1 year of quality inspection experience or 2 years of GAC manufacturing experience required. 2 years of manufacturing experience or equivalent aerospace experience is preferred. Other Formal Inspection Training Program 90 Days required. Other Requirements: Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. Competent in the use of basic shop tools and equipment.

Position Type: Full Time Education Level: High School Job Shift: Day EDUCATION AND EXPERIENCE High school diploma or GED. Experience with calibration of inspection and test equipment preferred. Experience in an ISO 9001 environment preferred. Non-Destructive Testing Certification preferred. Ultrasonic Testing Inspector must have prior Level II experience. Preferably UT certified. What you will be responsible for: Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. Must be able to effectively use, read and interpret a tape measure. Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering drawings and Customer specifications. Must have weld inspection experience. AWS D1.1 experience is preferred. Working knowledge of Nondestructive Examinations and Powder Coating. Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. Regular attendance, ability to arrive at work punctually, ability to work onsite, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Mag Particle Inspection, preferred. COMPETENCY OR POSITION REQUIREMENTS Ability to read and comprehend simple instructions, short correspondence, memos, and procedure manuals in English. Ability to write simple correspondence in English. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Personal computer skills including electronic mail, record keeping, routine database activity, etc. are preferred. To apply send resume to ***********************

Description:Job Description Job Title: Quality Control Inspector Reports to: Quality Manager Classification: Non-Exempt Safety Sensitive: Yes R&A Form: Quality Inspector The Quality Inspector plays a crucial role in ensuring our products meet the highest standards of quality and compliance with industry standards throughout the production process. This person will serve as a hands-on resource for our production teams, providing interpretation and guidance on compliance standards. The Quality Inspector will work closely with the Quality Manager, Quality Lead and production teams to uphold Fiber Pad and our customers' quality standards. This role is performed under established guidelines and criteria. RESPONSIBILITIES/ESSENTIAL FUNCTIONS Conducts routine inspections of in-process and completed parts for production teams, utilizes manual measuring practices for precise specifications. Verify part to print accuracy for Shipping & Receiving. Complete First Article Inspections and paperwork. Read and understand complex blueprints. Verify stock to engineering revision changes. Utilize measurement tools such as calipers to assess product dimensions and tolerances. Maintain quality systems in accordance with AS9102 standards. Reports on and speak to quality metrics for management review. Collaborate with cross-functional teams to identify areas for improvement in processes and product quality. Provide training and guidance on quality standards to production staff. Document non-conformances and assist in the development of corrective action plans. Additional duties as needed or assigned by management. Adhere to safety protocols while handling materials and operating equipment. Assist in all phases of housekeeping to keep the facility clean and organized to help maintain a neat and tidy work area. Perform other duties as needed or assigned by leadership. Requirements: REQUIRED QUALIFICATIONS Minimum of 1 year of Proven experience in a Quality Control or Quality Assurance role within a manufacturing environment. Ability to use all measuring tools, read and decipher detailed measurements on blueprints. Ability to read GD&T prints and perform manual measurements frequently to complex specifications. Knowledge of AS9100 Quality System, AS9102 FAI paperwork, First Article Inspection. CMM knowledge strongly preferred. Strong analytical skills with the ability to interpret data effectively. Experience conducting quality audits and implementing quality management systems. Proficiency in using measurement tools such as calipers and gauges. Excellent attention to detail. Ability to work collaboratively in a team-oriented environment while maintaining independence when necessary. Strong communication skills, both verbal and written. Basic computer skills, familiarity with MS products is a plus Excellent organizational skills to manage multiple tasks effectively in a fast-paced environment. High level of dependability regarding attendance and punctuality. Ability to collaborate and work well within a team environment, and willingness to motivate and support others, supporting the Core Values of Fiber Pad. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: Ability to use hands including fingers to hold, touch, see, feel, grip, squeeze, push and pull. Ability to perform pushing, pulling, forward exertion on a regular basis. Ability to see near and far, utilize peripheral vision and depth perception for tasks being performed. Ability to have overhead extension with arms on a regular basis Ability to use enhanced levels of manual dexterity with arms and hands to operate taping and packaging materials, forklifts regularly and industrial power tools occasionally. Ability to stand and walk continuously on concrete floor for 10-hour shifts Ability stand, crouch, stoop, bend, kneel and squat frequently. Ability to climb ladders frequently. Ability to work from elevated surface such as a ladder frequently. Ability to bend and twist at the hip and waist area on a regular basis Ability to rotate neck to look backwards, up, down and sideways on a regular basis Ability to regularly lift and or move 45-55 lbs. Ability to understand and communicate verbally, in person and over paging system Ability to meet requirements of and utilize all PPE when required EDUCATION: High School Diploma or equivalent required. ENVIRONMENTAL CONDITIONS The environment described here is meant to be representative of those an employee would normally encounter while performing the essential functions of the job. The physical environment requires the employee to work inside in heat/cold, with exposure to production noise. Required to use PPE while performing job functions. SPECIAL JOB DIMENSIONS Work involves overtime and could involve schedule changes based on company need. Requires adherence to deadlines and project completion deadlines.

Perform in-process and final inspections of electro-mechanical assemblies. This typically includes various mechanical assemblies, piping, brackets and wiring, lighting, boxes, etc. What you will be responsible for: * Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. * Must be able to effectively use, read and interpret a tape measure. * Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. * Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. * The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. * Must be able to read and interpret Engineering drawings and Customer specifications. * Must have weld inspection experience. AWS D1.1 experience is preferred. * Working knowledge of Nondestructive Examinations and Powder Coating. * Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. * Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. * Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. * Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. * Mag Particle Inspection, preferred. COMPETENCY OR POSITION REQUIREMENTS * Ability to read and comprehend simple instructions, short correspondence, memos, and procedure manuals in English. Ability to write simple correspondence in English. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. * Personal computer skills including electronic mail, record keeping, routine database activity, etc. are preferred. EDUCATION AND EXPERIENCE * High school diploma or GED. Experience with calibration of inspection and test equipment preferred. * Experience in an ISO 9001 environment preferred. * Non-Destructive Testing Certification preferred. * Ultrasonic Testing Inspector must have prior Level II experience. Preferably UT * certified. At Kelvion we thrive on collaboration, embracing diversity of thought, and valuing every voice. Within Kelvion creativity shines because people are listened to, their contributions recognised, and their ideas welcomed. Our flexible approach to the way we work places people's health and satisfaction as a priority, enhancing engagement and fostering career opportunities. We empower engaged individuals to grow, progress and carve their own paths within the company. Together, We Shape the Future

+ Maintains and repairs machinery such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment. Performs maintenance and repairs to physical structures of facility. + Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. + The requirements listed below are representative of the knowledge, skill, and/or ability required. + Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Experience:** + Minimum three to five years related experience and/or training; or equivalent combination of education and experience. **Skills:** **Language Skills:** + Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. + Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. + Bilingual (English Spanish) preferred. **Mathematical Skills:** + Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. + Ability to compute rate*** ratio, and percent and to draw and interpret bar graphs. **Education:** + Minimum High school diploma or general education degree (GED) **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Requirements KNOWLEDGE, SKILLS AND ABILITIES: · At least a high school diploma or GED is required. · A minimum of 18 months of previous inspection experience in a heavy manufacturing environment is required. · Two years in a related technical program is preferred but not required. · The ability to proficiently use precision measurement tools and gages, including paint inspection tools, is required. · The ability to perform layout and fitting inspections to blueprints and P&ID's is required. · The ability to act with integrity, professionalism, and confidentiality is required. · The ability to remain organized with a keen attention to detail in a fast-paced environment is required. · The ability to prioritize tasks and meet deadlines utilizing excellent time management skills is required. · Strong and effective verbal and written communication skills, interpersonal and conflict resolution skills are required. · Proficiency with Microsoft Office Suite including Outlook, Word, Excel, Adobe, PowerPoint, etc. is required. · Previous experience in an ISO 9001 environment is preferred but not required.

Job DescriptionC & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Distribution Inspector 3Location: Tulsa, OKKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards.Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities.Ensure all inspections meet or exceed industry regulations and standards.Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection.API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting.Strong communication skills with the ability to work effectively in a team environment. C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDay Electro/Mechanical Quality Control Inspector $22.00 + Hourly Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. Must be able to effectively use, read and interpret a tape measure. Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering blueprints and Customer specifications. Detail oriented and must have experience with inspection mechanical, electrical, and structural assemblies or installations. Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Experience with pneumatic pressure or leak testing, preferred. Any NEC-code experience preferred. High school diploma or GED. Experience with calibration of inspection and test equipment mandatory 2-3 years experience. Experience in an ISO 9001 environment preferred

Job DescriptionDescription: The Quality Inspector plays a crucial role in ensuring our products meet the highest standards of quality and compliance with industry standards throughout the production process. This person will serve as a hands-on resource for our production teams, providing interpretation and guidance on compliance standards. The Quality Inspector will work closely with the Quality Manager, Quality Lead and production teams to uphold Fiber Pad and our customers' quality standards. This role is performed under established guidelines and criteria. RESPONSIBILITIES/ESSENTIAL FUNCTIONS Conducts routine inspections of in-process and completed parts for production teams, utilizes manual measuring practices for precise specifications. Verify part to print accuracy for Shipping & Receiving. Complete First Article Inspections and paperwork. Read and understand complex blueprints. Verify stock to engineering revision changes. Utilize measurement tools such as calipers to assess product dimensions and tolerances. Maintain quality systems in accordance with AS9102 standards. Reports on and speak to quality metrics for management review. Collaborate with cross-functional teams to identify areas for improvement in processes and product quality. Provide training and guidance on quality standards to production staff. Document non-conformances and assist in the development of corrective action plans. Additional duties as needed or assigned by management. Adhere to safety protocols while handling materials and operating equipment. Assist in all phases of housekeeping to keep the facility clean and organized to help maintain a neat and tidy work area. Perform other duties as needed or assigned by leadership. Requirements: REQUIRED QUALIFICATIONS Minimum of 1 year of Proven experience in a Quality Control or Quality Assurance role within a manufacturing environment. Ability to use all measuring tools, read and decipher detailed measurements on blueprints. Ability to read GD&T prints and perform manual measurements frequently to complex specifications. Knowledge of AS9100 Quality System, AS9102 FAI paperwork, First Article Inspection. CMM knowledge strongly preferred. Strong analytical skills with the ability to interpret data effectively. Experience conducting quality audits and implementing quality management systems. Proficiency in using measurement tools such as calipers and gauges. Excellent attention to detail. Ability to work collaboratively in a team-oriented environment while maintaining independence when necessary. Strong communication skills, both verbal and written. Basic computer skills, familiarity with MS products is a plus Excellent organizational skills to manage multiple tasks effectively in a fast-paced environment. High level of dependability regarding attendance and punctuality. Ability to collaborate and work well within a team environment, and willingness to motivate and support others, supporting the Core Values of Fiber Pad. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: Ability to use hands including fingers to hold, touch, see, feel, grip, squeeze, push and pull. Ability to perform pushing, pulling, forward exertion on a regular basis. Ability to see near and far, utilize peripheral vision and depth perception for tasks being performed. Ability to have overhead extension with arms on a regular basis Ability to use enhanced levels of manual dexterity with arms and hands to operate taping and packaging materials, forklifts regularly and industrial power tools occasionally. Ability to stand and walk continuously on concrete floor for 10-hour shifts Ability stand, crouch, stoop, bend, kneel and squat frequently. Ability to climb ladders frequently. Ability to work from elevated surface such as a ladder frequently. Ability to bend and twist at the hip and waist area on a regular basis Ability to rotate neck to look backwards, up, down and sideways on a regular basis Ability to regularly lift and or move 45-55 lbs. Ability to understand and communicate verbally, in person and over paging system Ability to meet requirements of and utilize all PPE when required EDUCATION: High School Diploma or equivalent required. ENVIRONMENTAL CONDITIONS The environment described here is meant to be representative of those an employee would normally encounter while performing the essential functions of the job. The physical environment requires the employee to work inside in heat/cold, with exposure to production noise. Required to use PPE while performing job functions. SPECIAL JOB DIMENSIONS Work involves overtime and could involve schedule changes based on company need. Requires adherence to deadlines and project completion deadlines.

The Role Perform in-process and final inspections of electro-mechanical assemblies. This typically includes various mechanical assemblies, piping, brackets and wiring, lighting, boxes, etc. What you will be responsible for: * Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. * Must be able to effectively use, read and interpret a tape measure. * Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. * Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. * The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. * Must be able to read and interpret Engineering drawings and Customer specifications. * Must have weld inspection experience. AWS D1.1 experience is preferred. * Working knowledge of Nondestructive Examinations and Powder Coating. * Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. * Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. * Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. * Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. * Mag Particle Inspection, preferred. COMPETENCY OR POSITION REQUIREMENTS * Ability to read and comprehend simple instructions, short correspondence, memos, and procedure manuals in English. Ability to write simple correspondence in English. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. * Personal computer skills including electronic mail, record keeping, routine database activity, etc. are preferred. EDUCATION AND EXPERIENCE * High school diploma or GED. Experience with calibration of inspection and test equipment preferred. * Experience in an ISO 9001 environment preferred. * Non-Destructive Testing Certification preferred. * Ultrasonic Testing Inspector must have prior Level II experience. Preferably UT * certified. What we offer YOU: At Kelvion, we take your well-being seriously. Our comprehensive benefits package includes options for medical, dental, vision, life insurance, short-term and long-term disability insurance, Paid Time Off, and holidays. We also help you plan for retirement by offering a 401(k) Retirement Savings Plan with a company match. At Kelvion we thrive on collaboration, embracing diversity of thought, and valuing every voice. Within Kelvion creativity shines because people are listened too, their contributions recognized, and their ideas welcomed. Our flexible approach to the way we work, places people's health and satisfaction as a priority, enhancing engagement and fostering career opportunities. We empower engaged individuals to grow, progress and carve their own paths within the company. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. If you need assistance with this application or a reasonable accommodation due to a disability, you may contact us at **********************. This email address is reserved for individuals with disabilities in need of assistance and is not a means of inquiry regarding positions or application status. We are unable to sponsor or take over sponsorship of an employment visa for this role at any time.