Quality control inspector jobs in Easthampton Town, MA - 217 jobs

Responsible for quality control review activities for the Bank's loan portfolio. The Loan Servicing Quality Control Specialist will assist in creating and maintaining QC requirements related to loan operations. This will include validating system reports, follow-up for missing or inaccurate information, and performing other duties pertaining to the loans held, serviced, originated, or sold by the Bank. In addition, this candidate will monitor and review all necessary quality control tasks to ensure they are performed in compliance with Bank policies and procedures. The desired candidate will have a very strong attention to detail with the ability to quickly resolve any issues to mitigate both monetary and reputational risk. ESSENTIAL FUNCTIONS: Performs reviews related to reports and/or loans in accordance with the department's procedures to ensure customer and bank expectations are met. Maintains existing procedures/processes and coordinates implementation of new procedures/processes to ensure the Bank is in compliance with applicable regulatory requirements, as needed. Updates and maintains quality control log, note inventory log, and PIF log. Performs quality control reviews on all new loan files to include core system and documentation. Performs quality control activities on closed and denied/withdrawn loans as defined in policies and procedures. Reviews quality control departmental reports for maintenance activities, accuracy and completion. Follows up for any post-closing documentation items and escalates any time delays or issues related to quality control to appropriate management team to ensure items are resolved timely and accurately. Maintains industry knowledge, stays abreast of regulatory changes with regards to all loan origination and operation. Updates procedures as these environments change. Reviews daily rates to ensure accuracy on the core system. Reviews and mails all system generated notices. Completes internal file audits to ensure accuracy and originals are maintained per regulatory requirements. Prepares PIC posting sheets daily to ensure allocation of loans to appropriate GL. Supports document imaging initiatives. Balances DDA and GL accounts. Performs other related duties as required. REQUIRED EDUCATION / EXPERIENCE / SKILLS: Post high school education with one (1) to three (3) years of mortgage loan servicing experience or some comparable combination of education and experience. Knowledge of all pertinent regulations related to Residential, Consumer, and Commercial lending. Excellent written and verbal communications skills. Strong customer service orientation. Proficient operation of the Bank's loan servicing system and Microsoft software such as Word, Excel, and Outlook. Working knowledge of the Bank's loan product offerings, Bank loan regulations and the Bank's loan policies and procedures. Ability to interact with co-workers and customers in a positive manner. Ability to exchange information with others clearly and concisely: to present ideas, facts and technical information. Ability to perform under stress when confronted with critical timeline constraints and large work volumes. Ability to perform a variety of duties within the department, after receiving appropriate cross training, without the loss of efficiency or composure. Ability to receive guidance and supervision and follow work rules and procedures. Ability to meet deadlines, and to meet punctuality and attendance standards. Ability to systematically identify task requirements and monitor progress towards accomplishment. Ability to maintain relationships that facilitate task accomplishment, to cooperate and resolve conflicts, to recognize needs and be sensitive to others and to convince and persuade. Ability to work independently as well as in a team-based environment. Ability to learn quickly with a strong attention to detail and problem-solving. Windsor Federal Bank, an Equal Opportunity Employer, offers a competitive compensation and benefits package including vacation, personal days, paid sick time, holidays, participation in a 401(k) plan, and profit sharing. For consideration for this position, send resume to: ********************************* Windsor Federal Bank, 270 Broad Street Windsor, CT 06095 An Equal Opportunity Employer

Adecco is assisting a local client in hiring a Senior Level Quality Inspector (Designated Quality Representative) in East Hartford, CT. This opportunity has potential to become Temp to Hire or Direct Hire dependent on candidate experience and client evaluation. Day and evening shifts available and pay rate range from $30-$37/hr. (dependent on experience). If your experience matches the qualifications below, apply now to adecco.com. Extensive experience with hand gauges, bench inspection, and final/over-inspection work Ability to inspect tight-tolerance precision aerospace components Prior experience as a Designated Quality Representative (DQR) strongly preferred Familiarity with aerospace quality systems, technical specifications, and customer-driven inspection requirements Benefits include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401k plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Sick Leave, where required by Federal, State, or local law, and Holiday pay upon meeting eligibility criteria. Pay Details: $30.00 to $37.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

ID 2025-17966 Element has an opportunity for a Cleanroom Quality Technician. The Cleanroom Quality Technician is responsible to ensure that all company and customer technical and regulatory requirements are followed within the Precision Cleaning Division. This person will be responsible to ensure processing tanks are cleaned, filtered and meet specification requirements by performing weekly titrations. Cleaning of the cleanroom will be performed on a daily, week, monthly basis to help prevent and eliminate potential risk of foreign object debris. Documents corresponding with each machine will be collected, scanned and organized on a monthly basis. All duties will be communicated with the department manager. Salary: $20- $24/hr DOE Responsibilities Essential Duties and Responsibilities include the following. Other duties may be assigned. * Administers and inventories the certifications of purchased items. * Back up for review & approve PCD finished job certifications. * Works with crafts to dispose of unwanted chemicals and supplies. * Performs a daily, weekly and monthly cleaning of the certified Cleanroom. * Change chemical tanks periodically throughout the week as per schedule. * Is responsible for keeping quality records organized and easily located on company's servers. Administer and perform: * PCD Preventive Maintenance program. * PCD Calibration program. * Updates of the PCD "uncontrolled" within the quality masters' folders. Skills / Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Common knowledge of basic hand tool use. Microsoft Office Skill are a plus. Lifting of up to 25 lbs. is expected. Mechanical aids are available for weights over 25 lbs. Will be exposed to mild alkaline and acidic based detergents and organic solvents. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) "If you need an accommodation filling out an application, or applying to a job, please email "

Job Description About Us Stellar Industries is a rapidly growing industry leader in manufacturing metalized ceramics. We are a major supplier of innovative, high-quality parts to the Aerospace, Photonics, Telecommunications, and Commercial industries. The company was acquired by TRUMPF Photonics in 2019 and has significant growth goals. About the Role The Quality Control Inspector Level II maintains quality standards by inspecting incoming materials from outside suppliers, in-process production, and finished products in accordance with the quality standards and operating procedures set forth by the Head of Quality Control/Quality Assurance. What You Get to Do Works independently with minimal supervision. Maintain an organized and clean work area. Uses Hand tools, including but not limited to tweezers, calipers, and micrometers. Confirms specifications by conducting visual and measurement tests. Works with a variety of blueprints and technical drawings; must be able to interpret changing requirements as products and builds vary. Completes a General Inspection Report by documenting inspection findings regarding product dimensions, quantity of parts accepted/rejected, and basis of rejection. Uses Vision Systems and documents results into the computer. Follow all safety protocols. Cross-train as requested in other areas of the company. About You Minimum of 3 years of quality control experience. Must be able to work in a sitting position for up to 10 hours. Must be able to wear a lab coat, spittle mask, and gloves while working. The position requires working with measuring devices and microscopes. Individuals must have previous experience working in a similar environment. Must be able to work independently and demonstrate extremely high levels of precision and accuracy. line, High-Temperature BTU Furnaces, as well as various facility-related items, including air handlers, air compressors, air filtration units, etc. What We Offer Competitive pay A generous benefits package that includes medical, dental, 401K plan, and PTO Employer-paid vision plan, Employer paid Basic Life and AD&D Insurance, and Employer Paid Disability Insurance Tuition Reimbursement 4-Day workweek, Monday-Thursday 12 pm-10:30 pm Monday-Thursday 12:00 pm - 10:30 pm

Job Description WHO ARE WE: BlackHawk Industrial provides you the highest quality industrial products and equipment, offering manufacturing services while creating innovative engineered supply solutions. We truly believe in the importance of the local relationships with the customers we service. Our employees have fun every day exceeding the expectations of our customers, suppliers, and shareholders. We distinguish ourselves as the #1 choice of industrial manufacturers who are in need of Technical Service and Production Savings. We are BIG ENOUGH TO SERVE, and SMALL ENOUGH TO CARE. **This position is located onsite in Southington, CT** SUMMARY: The Quality Inspector is responsible for inspection of cutting tools by reading prints and inspecting tools by using micrometers, calipers, comparators, indicators and other measuring tools/machines, to ensure that they meet quality standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Personally exhibits, recruits and coach's associates consistent with Core Behaviors Responsible for promoting culture of safety Perform final quality inspection of finished products in accordance with the established procedures Report all instances of rejected product or raw materials problems to management Inspect incoming raw materials as materials are received Document appropriate information for quality inspection reports for each order Create and maintain current files for all quality related correspondence Work with shop floor supervisor to review internal rejects from the shop floor Report any unusual discrepancies or problems promptly to management Perform internal quality audits Perform other related duties as assigned Knowledge and ability to use micrometers, vernier caliper, radius gages and other video inspection equipment Competent with applying math skills/tool geometry SKILLS: Knowledge of cutting tools Excellent math aptitude Excellent customer service skills Excellent communication, interpersonal and organizational skills Diplomatic and professional when resolving issues Work well under pressure, and have exceptional time management skills Self-motivated and able to work independently Must be able to follow instructions in a fast paced, flexible environment EDUCATION and/or EXPERIENCE: High School Diploma or equivalent required Prior experience inspecting aerospace cutting tools preferred CERTIFICATES, LICENSES, REGISTRATIONS: None required WORK ENVIRONMENT: Employee is regularly required to speak and hear English, stand, walk, sit, use hand to finger, handle or feel objects, tools, or controls; reach with hands and arms. Employees are required to use computers and other equipment. Employees frequently lift and/or move up to 40 pounds. Specific vision abilities include close vision and the ability to clearly focus vision. PPE REQUIRED: Wrist rests for keyboard and mouse pad. Eye protection, ear protection, steel-toed shoes as required BENEFITS: Health Insurance BCBS of OK HDHP HSA with Employer match (must meet criteria) Dental and Vision Insurance 401K Plan and Company Match FSA (Full FSA, Limited FSA, and Dependent FSA) Company paid Long Term and Short-Term Disability Company paid basic Life Insurance and AD&D/ Supplemental life and AD&D/Dependent life Ancillary Critical Illness Insurance (Wellness Rider Included) Ancillary Accident Insurance (Wellness Rider Included) Ancillary Hospital Indemnity Employee Assistance Program (EAP) - Includes concierge services and travel assistance. Paid Time Off Holiday Paid Time Off Gym Reimbursement Quarterly Wellness challenge with a chance to will money or prizes Tuition Reimbursement - after 1 year of employment *BlackHawk Industrial is an Equal Opportunity Employer **As part of our BHID policy, we require all potential employees to undergo pre-employment background and drug screening. This is a standard procedure we follow to ensure a safe and productive work environment.

Navigate Valence on-line system for QWI's, QAP's, Specifications and other documents. Competently Maintain and operates all inventories, machinery and instruments necessary to safely perform the job function, including routine. Competently process all paperwork and department clerical functions in the performance of this jobs function. Competently perform all daily, weekly and periodic functions as defined in OJT. Maintain a clean, safe work environment. Understand, and perform steps defined in the Valence ROUTER, follow Valence procedures on correctly filling out routers, corrections of input mistakes. Competently process job/parts with little or no supervision. Practice behavior which avoids damage to parts and protects the part from damage. WORK ENVIRONMENT The position involves working with and around hazardous chemicals, paints and solvents. The majority of work is performed in shop conditions. Company Benefits: Medical, Dental, Vision, Long term Disability, Employee Assistance Program, 401(K)-3% Match, Holiday Pay COMPENSATION RANGE: $20.00 To $24.00 Per hour.

Working at Breeze Airways is an exciting endeavor and a serious commitment to bring “The World's Nicest Airline” to life. We work cross-functionally with truly awesome Team Members to deliver on our mission: “To make the world of travel simple, affordable, and convenient. Improving our guests travel experience using technology, ingenuity and kindness.” Breeze is hiring- join us! The Quality Control Inspector is responsible for the daily operation of the Quality Control (QC) department at his or her location Including the development, oversight, and accomplishment of daily Aircraft Inspection activities. They will report to the Manager, Quality Control and support the overall surveillance of the Aircraft Maintenance System to ensure compliance with company maintenance procedures and regulatory requirements. This position requires strong communication across all areas of Operations, including Technical Operations, Aircraft Maintenance, Quality Control, Quality Assurance and Engineering teams. Breeze is looking for great and experienced talent. Your entry pay will based on your experience ( up to $39.00 starting pay ) and our established criteria. $2.00 shift differential added when working from 9:00PM - 7:30AM Here's what you'll do Responsible for administering Breeze Airways policies in Quality Control and inspection in a line maintenance environment. Conduct surveillance and oversight of work performed at line Maintenance locations to ensure Breeze standards and those prescribed by the Code of Federal Regulations (CFR) are maintained. Perform aircraft Required Inspections (RII) as described in company manuals. Performs Materials Receiving inspections as described in company manuals. Performs engine Borescopes as described in engineering orders and OEM data. Performs NDT Inspections as described in engineering orders and OEM data. Self-starter with a team mentality and culture driven mindset. Reports to the Manager, Quality Control. Duties/Responsibilities Plan and control the application of inspection and quality control methods and procedures to ensure the safe, reliable, and economic performance of Breeze aircraft. Support the Quality Control Program, including Required Inspection Items and RII Authorized Inspectors as specified in the Breeze Airways GMM. Support the Receiving Inspection Program, including Receiving Inspection Procedures as specified in the Breeze Airways GMM. Monitor workmanship and materials to verify that applicable Breeze and FAA regulations and standards are complied with. Conduct an on-going program to enhance the level of professionalism and state-of-the-art inspection applications within the inspection department. Administer, and support, and support the NDT program, performance, and workmanship to verify that applicable Breeze and FAA regulations and standards are complied with. Oversee the establishment and implementation of tool procedures and monitor tooling policies and calibration procedures to ensure tooling meets conformity, equivalency, and all calibration standards. Develop recommendations for new tools that promote increased tool and equipment availability, reliability, or enhanced maintenance capability. Support procedures for calibration of tools and equipment based on manufactures recommendations. Recommend changes to the maintenance program and work specifications, based on recurring discrepant conditions found on Breeze aircraft undergoing maintenance. Apprise the Manager of Quality Control and Chief Inspector of any issues that may affect safety, quality, or schedule of Breeze aircraft during aircraft maintenance. Provide leadership and direction to ensure that high standards of performance are maintained in the areas of Quality, Safety. Maintain compliance with SMS and Company safety policies and procedures as well as Federal Regulations by reporting any safety hazard or potential hazard. Include SMS in your daily work habits and remain current in the training requirements for SMS. Embody the Breeze Values and conduct oneself with Safety, Kindness, Integrity, Ingenuity, and Excellence. Perform such other duties as assigned by the Manager. Quality Control and Chief Inspector. Here's what you'll need to be successful Minimum Qualifications Must be at least 18 years of age High school diploma or equivalent educational achievement Must hold a current, valid FAA Airframe and Powerplant License (A&P) with no history of infractions Five years of Aviation Maintenance experience with at least three years in Quality Control/Assurance/Inspection Understanding and working knowledge of FAR part 43, 65, 91, 121, and 145 Must have a valid driver's license Must have a valid passport with no travel restrictions Must have authorization to work in the US as defined by the Immigration Reform Act of 1986 Must be flexible and willing to work days, nights, weekends, holidays, and overtime if needed Must be willing to travel up to 30% of the time Must be willing to work with other departments within the company as needed Must pass a DOT pre-employment drug test Must pass a TSA required fingerprint-based criminal history records check and a Breeze background check Ability to read, write, speak, and understand the English language Preferred Qualifications At least two (2) years in management or a leadership role Degree in Aerospace, Aviation Maintenance, or Business Ten years of FAR 121 air carrier aircraft maintenance experience Understanding of Safety Management System (SMS) rules Skills/Talents Skilled in Microsoft Office Suite (Word, Excel, Outlook) Excellent communications skills, both verbal and written Strong presentation skills with the ability to communicate to Leadership Must be able to handle high-stress situations Ability to work with fellow Team Members with a variety of personalities Ability to multi-task easily Must be fluent in English Exemplifies Breeze's safety culture, values, and mission Perks of the Job Health, Vision and Dental Health Savings Account with Breeze Employee Match 401K with Breeze Employee Match PTO Travel on Breeze and other Airlines too! Breeze Airways provides equal employment opportunities to all Team Members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Breeze Airways will never request your Social Security Number, Driver's License or Date of Birth on our job postings. Job Postings requesting any or all of this information should be regarded as a scam. To ensure you are applying to an actual Breeze Airways posting, please apply online at ***************** then click “Careers” at the bottom of the page.

About UFP MedTech: UFP Technologies is a designer and custom manufacturer of comprehensive solutions for medical devices, sterile packaging, and other highly engineered custom products. UFP is an important link in the medical device supply chain and a valued outsource partner to most of the top medical device manufacturers in the world. The Company's single-use and single-patient devices and components are used in a wide range of medical devices and packaging for minimally invasive surgery, infection prevention, wound care, wearables, orthopedic soft goods, and orthopedic implants. UFP Technologies, Inc. offers a competitive benefits package, including but not limited to: * Medical, Dental, Vision, Life, Disability Insurance * 401K with a matching contribution * Paid time off, Paid holidays, Employee discounts and much more! Location: This position will be on-site full-time in Chicopee, MA. The position holder will need to be within commuting distance (within 45 min). Quality Technician Summary: The Quality Technician performs diversified duties to monitor and ensure the proper quality testing of company products. This role provides support related to corrective action containment, component measurement / testing, product certification and administrative tasks. Quality Technician Essential Duties and Responsibilities: * Audits quality testing and documentation completed by operators, and reviews quality testing results to ensure proper testing has been conducted, results properly recorded and that results are within specification and without documentation errors. * Reads, reviews and interprets statistical run charts to detect trends in product quality line fall-off and report to appropriate personnel. * Ensures all ISO or other quality standards and procedures are being followed. * Authorizes release of finished goods based on quality audits. * Participates in Root Cause Investigations and provides corrective actions to customer SCARs. * Conducts any required special testing, failure analysis, etc. * Provides instruction, guidance and direction for manufacturing employees in determining acceptable products. * Performs regularly scheduled calibration of measuring and test equipment and arrange external calibration services. * Performs all other duties as assigned or needed. Quality Technician Qualification Requirements: * High school diploma, and 2+ years of related work experience. * Experience with Quality Standards - ISO 9001 and / or ISO 13485. * Bi-lingual in Spanish strongly desired. * Able to read and understand blueprints and other specifications. * Able to use micrometers, calipers, video measuring equipment and other common inspection tools. * Basic knowledge interpreting SPC control charting. * Ability to interact with different levels of the organization. * Strong oral communication and interpersonal skills. * Experience with Microsoft Office applications. UFP Technologies, Inc. is an Equal Opportunity/Affirmative Action employer Minorities/Women/Veterans/Disabled. #UFP #MEDTECH #CHIC

Job Purpose: Maintains quality standards and records quality results. Performs production Inspection. Understands and complies with SPI's Documents inspection results by completing reports and logs; summarizing re-work and waste; and inputting data into the quality database. Maintains a safe and healthy work environment by following standards and procedures; complying with legal regulations. Skills/Qualifications: 1-5 years' experience as an inspector in Aerospace Analyzing Information, Manufacturing Methods, and Procedures. Knowledge of GD&T is beneficial Strong verbal and interpersonal skills, analytical, and shop math skills It is the policy of this company to extend equal employment opportunities to all qualified employees without regard to race, color, religion, creed, marital status, learning disability, sexual orientation, national origin, sex, age, history of mental illness, mental retardation or physical, unless such disability prevents performance of the work involved. This policy applies to all phases of employment including, but not limited to, recruitment, hiring, placement, upgrading and promotion, transfer, layoff and recall, termination, selection for company sponsored training programs, rates of pay and other forms of compensation, use of facilities, and participation in all company sponsored activities.

Job DescriptionQuality Inspector - Precision Parts | Direct Hire $17-$30 per hour, based on experience Love working with precision? Here's your chance to put your skills to the test! We're hiring a Quality Inspector to ensure every part meets exact standards. If you thrive on accuracy, this role is for you. What You'll Do: Inspect incoming, in-process, and finished metal parts Work with tight tolerances and detailed specifications Read and interpret blueprints / GD&T Play a key role in delivering top-quality products What You Bring: Hands-on inspection experience with close tolerances Strong GD&T and blueprint reading skills Stable work history in quality/manufacturing Aerospace background = big plus! Why You'll Love It: Direct hire opportunity Competitive pay: $17-$30/hr DOE Join a team that values precision and craftsmanship Your attention to detail could be exactly what we're looking for. Apply today and take your quality control career to the next level! A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws.

Our QC Inspector supports Mativ's Sustainable & Adhesive Solutions Function. This individual will perform inspections and tests throughout the manufacturing process to ensure compliance with specifications under the supervision of Quality Engineering. The shift schedule is 6pm-6am. responsibilities: * Performs all auditing and testing of in-process, and finished goods to include Retain, Coat Weight, Cure and any additional testing as required by the Product Requirement Sheet, (PRS) or Tech 11. * Record and enter test results into the Scapa ERP System * Perform all manufacturing audits prior to production and at required intervals. * Maintain and organize product master files. * Coordinate shop floor QC testing based on daily and weekly production schedule. * Issue non-conformance report for any tested material that is out of specification. * Perform visual inspections of materials being coated and slit/converted and immediately inform coating/converting operators of any defects. * Interfaces with Quality Assurance and Production scheduling in the preparation and reviewing of slitting specifications. * Evaluates product quality based on product specifications and makes appropriate usage decisions. * Responsible for setting up test equipment. * Maintaining inventory of QC lab MRO items * Responsible for maintaining all related files and documents according to Good Documentation Practice, (GDP). * Assists in training new QA Inspectors and manufacturing personnel. * Participates as a team member in continuous improvement events. * Maintain QC test equipment and calibration status. * Assists quality engineers and quality technicians with gage R&R, and other validation activities. * Follows safety rules and keeps the work area in a clean and orderly manner. * Complies with company attendance policies. * Issue Supplier Complaints in the ICS, (Internal Complaint System), for nonconforming raw material. qualifications: Required * Minimum of 2 years' experience in Q. A. or Q. C. manufacturing environment. * High School diploma required, bachelor's degree highly preferred. * Familiar with basic measurements, test equipment and basic math skills. * Medical device industry experience preferred. * Ability to communicate and work within a team environment. * Fluency in English both verbal and written Preferred * 2 years' experience in Quality Assurance or Quality Control. * 2 years' experience in medical device or industrial manufacturing. * Associate degree in chemistry, physical sciences, or tech field. Relevant job experience may be considered in place of a 2-year degree. * Able to collaborate and work well with others. Position Demands Conditions are that of a manufacturing environment: * Air Temperatures can range from cold to hot. * The atmosphere may contain dust, fumes, and odors. * May include mechanical, electrical, chemical, explosive and radiation hazards. Employees are required to wear Personal Protective Equipment (PPE) including: * Safety shoes (steel toe or composite toe) * Safety Glasses * Bump Caps * Protective Gloves, when performing certain tasks * Hearing Protection, when required. * Other personal protective equipment as required for certain tasks. While performing the duties of this job the employee must meet the physical demands: * Be able to lift a minimum of 50 pounds. * Be able to work 12-hour shifts. * Perform repetitive tasks. * Routinely stand, sit, hear, walk, and talk. * Reach, climb, bend, kneel, crouch, twist, and balance, sometimes in awkward or tight spaces. * Have good close vision, depth perception, and the ability to focus. WHAT WE OFFER At Mativ, our benefits reflect how much we value and care for each other. We know that employees and their families have unique needs, so our comprehensive benefits offer flexibility, quality, and affordability. Here are just a few of the ways we support your well-being and that of your loved ones: * Medical, dental and vision insurance * Consumer-Driven Health Plan (CDHP) * Preferred Provider Organization (PPO) * Exclusive Provider Organization (EPO) * Company-paid basic life insurance and Additional voluntary life coverage * Paid vacation and competitive personal time off * 401(k) savings plan with company match * Employee assistance programs - available 24/7 to you and your family * Wellness and Work Life Support - career development and educational assistance ABOUT MATIV Mativ Holdings, Inc. is a global leader in specialty materials headquartered in Alpharetta, Georgia. The company connects, protects, and purifies the world every day through a wide range of critical components and engineered solutions that solve our customers' most complex challenges. We manufacture on three continents and generate sales in nearly 100 countries through our family of business-to-business and consumer product brands. The company's two segments, Filtration & Advanced Materials and Sustainable & Adhesive Solutions, target premium applications across diversified and growing end-markets, from filtration to healthcare to sustainable packaging and more. Our broad portfolio of technologies combines polymers, fibers, and resins to optimize the performance of our customers' products across multiple stages of the value chain. Our leading positions are a testament to our best-in-class global manufacturing, supply chain, and materials science capabilities. We drive innovation and enhance performance, finding potential in the impossible. Mativ and its subsidiaries are Equal Opportunity Employers. Qualified applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Title: Inspector Quality Control- 1st Article Inspector Department: MPA Warehouse Reports To: Quality Control Manager FLSA Status: Hourly Non-Exempt In- Direct Position Date: 11/17/25 Work Hours: 7:00AM - 3:30PM SUMMARY Responsible for performing detailed inspections on New GG8 spare parts and Customer owner tooling using overhaul manuals, standard practice manuals and WGPW established procedures. Strong-dimensional skills, drawing interpretation are required and previous experience in the aerospace industry is a strong plus. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities. Maintains a safe and clean work area and adheres to all housekeeping requirements. Follows all safety procedures and rules and properly wears all safety protective equipment as required. Able to read and understand Pratt & Whitney engine manuals, blue prints, service bulletins, illustrated parts catalogs, standard practice, and spare parts bulletins. Able to understand GD&T and drawing interpretation. Able to process quality transactions in ERP system, including non-conformities. Able to use basic shop measuring equipment including Micrometers, Vernier and Dial Calipers, Plunge and Test Indicators, Dial Bore Gages, Snap Gages, profilometer, and PI-Tapes. Working knowledge of a Window's based computer system. Works overtime as required. Conducts oneself in a business-like manner and in the spirit of teamwork. Receiving Inspection: Visual and dimensional inspection of various gas generators using MPA overhaul manuals and WGPW technical data. May be required to work at other WGPW locations or departments due to fluctuating workloads. Able to approve AS9102 First Article Inspection, including certification package and Supplier/Vendor inspection reports. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience with job audits, including internal ISO9001 audits. Ability to calculate figures such as ratios, area, circumference, and volume. Ability to apply the basic concepts of algebra, geometry, trigonometry, and shop math as they relate to inspection or trouble shooting. EDUCATION and/or EXPERIENCE Equivalent to high school plus additional broad specialized training in the Quality Control field or technical school, military training and one to three years related experience; or equivalent combination of education and experience. PHYSICAL & ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to sit, stand, and use hands to handle parts. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee may occasionally work with chemicals while receiving consumable materials in for use on parts within the shop. Possible use of alcohol and/or acetone for light cleanings of oils or dirt as parts are prepared for inspection. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Title: Inspector Quality Control Department: Quality Control Reports To: Chief Inspector FLSA Status: Hourly Non-Exempt Direct Work Hours: 7:00AM - 3:30PM SUMMARY Responsible for performing detailed inspections on aeroderivative Gas Turbine engines and related components using overhaul manuals, standard practice manuals and WGPW established procedures. Strong-dimensional skills are required and previous experience in the aerospace industry is a strong plus. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities Review job orders, customer specifications and build standards prior to inspecting parts. Perform initial, in-process and final inspection of industrial engine parts and modules using a variety of inspection tools per the inspection procedures manual, Overhaul manual (OHM) and other related documents. Determines condition of parts and/or modules, identifies requirements and initiates appropriate processes. Review parts to ensure that all required fits and clearances are taken, recorded and are within specified limits. Interact with Component Repair/Vendor Administration concerning in-process inspections, repairs and/or any problems with work instructions. Work independently, referring only unusual conditions or circumstances to engineering. Ensure that customer work instructions are carried out Maintain a safe and clean work area and adhere to all housekeeping requirements. Follow all safety procedures and rules and properly wear all safety protective equipment as required. Read and interpret complex drawings and blueprints. Conduct oneself in a businesslike manner and in the spirit of teamwork. Maintain inspection and repair documentation. Perform special projects as assigned by management. May be required to work at remote locations due to fluctuating workloads. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must possess a good working knowledge of jet engine component repair procedures required to determine proper repair actions. Aptitude for comprehending and interpreting documents encompassing safety rules, operating and maintenance instructions, and procedure manuals. Ability to interpret and apply a variety of instructions furnished in written, oral, diagram or schedule form. Ability to calculate figures such as percentages, ratios, area, circumference, and volume. Ability to apply the concepts of math as it relates to engine repairs, fits and clearances, and running positions. Capacity to solve unusual problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good working knowledge of Microsoft Office applications. Excellent mechanical skills, a high level of manual dexterity including hand-eye coordination and the ability to accurately use precision measuring tools such as micrometers, calipers, and dial indicators. Must be able to read, interpret, document, and use manufacturer's technical manuals, service bulletins, illustrated parts catalogs, assembly drawings, AOS sheets and WGPW assembly records. Able to use manufacturer's special tooling and lift and turn equipment effectively and safely. EDUCATION and/or EXPERIENCE Two-year certificate or degree from college, technical school or equivalent plus additional broad specialized training in an aviation or technical school, military training or greater than ten years related experience; or equivalent combination of education and experience. PHYSICAL & ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, and use hands to finger, handle or feel objects, tools, and controls. The employee is occasionally required to walk; sit; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee may occasionally work in high places and in outside weather conditions or be exposed to moving mechanical parts, fumes, airborne particles, solvents, and oils. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Kamatics is seeking an Inspector IV (1st Shift) who performs advanced inspection activities including first-piece, in-process, and final inspections of precision mechanical components and assemblies. This role supports production schedules, ensures compliance with engineering and quality standards, and provides technical leadership and guidance to inspection personnel. The Inspector IV reports to the Value Stream Manager or Senior Team Leader for production priorities and to the Quality Assurance Supervisor for quality-related matters. Shift: 1st Shift | 6:00 AM - 3:30 PM, Monday-Friday. One hour of mandatory daily overtime currently required About Kamatics: Kamatics is a global leader in high-performance bearings and engineered tribological solutions for aerospace, defense, and industrial applications. Our team develops self-lubricating bearings and precision components that deliver durability, reliability, and performance in the harshest environments. We take pride in engineering excellence, collaborative problem solving, and a culture built on innovation and customer trust.Job Responsibilities:Inspection & Quality Assurance Perform visual and dimensional inspections of precision mechanical components and assemblies to close tolerances. Conduct first-piece and in-process inspections within assigned value streams. Identify and report surface, dimensional, visual, material, documentation, and workmanship non-conformances to engineering drawings and Kamatics quality standards. Create and maintain inspection documentation including IMS, First Article Inspection (FAI), and related quality records. Prepare products and documentation for customer or source inspections and serve as a Designated Supplier Quality Representative when required. Measurement & Equipment Proficiency Demonstrate mastery using basic inspection tools: calipers, micrometers, dial bores, chamfer gauges, and profilometers. Demonstrate mastery using advanced inspection equipment: optical comparators, Sunnen gauges, and Trimos height stands. Demonstrate proficiency using specialty inspection devices including Johnson tri-roll, sine plate, and torque gauges. Demonstrate familiarity with additional inspection equipment such as swing gauges, contracers, digital comparators, Cadillac gauges, and Keyence IM systems. Operate and program CMM equipment, including probe calibration. GD&T & Technical Expertise Demonstrate mastery in measuring GD&T characteristics including roundness, parallelism, concentricity, runout, perpendicularity, flatness, and total runout. Demonstrate proficiency in true position and material modifiers. Demonstrate familiarity with profile tolerances. Apply blueprint interpretation and advanced shop mathematics to determine appropriate gauging and inspection methods. Leadership, Data & Continuous Improvement Assign and coordinate inspection tasks to ensure production schedules are met. Provide training, guidance, and technical leadership to inspection personnel as needed. Use computer systems and software (including Microsoft Excel) to collect, analyze, and present inspection data. Maintain accurate records, logs, and audit-ready documentation. Recommend and support continuous improvement initiatives, including 5S activities. Maintain a clean, safe work environment and follow all safety and environmental procedures. Job Qualifications:Education High School Diploma, GED, or equivalent required Experience Minimum of 4 years of inspection experience in a manufacturing environment, or equivalent demonstrated experience Knowledge, Skills & Abilities Expert knowledge of precision measuring devices, gauges, and testing instruments Strong CMM operation and programming skills Advanced blueprint reading skills, including GD&T interpretation Strong understanding of Statistical Process Control (SPC) Exceptional attention to detail and analytical skills Ability to generate accurate inspection reports, certifications, and compliance documentation Proficiency with Microsoft Office (Outlook, Word, Excel) and ERP systems Strong communication skills and customer-focused mindset Physical Demands Frequent mental and visual concentration Occasional lifting and moving of materials up to 50 lbs (15-40%) Frequent standing and walking Additional Requirements Ability to work overtime and weekends as required to meet customer demands Flexibility to work varying schedules as business needs dictate Benefits: At Kamatics, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. Kamatics is an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. Applicants requiring reasonable accommodation to complete the application process may contact Human Resources. This position requires access to information subject to the International Traffic in Arms Regulations (ITAR). Employment is contingent upon the applicant being a “U.S. person” as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws. (Actual placement within the salary range is dependent on multiple factors, including but not limited to skills, education, experience and location) Shift: 1st Shift | 6:00 AM - 3:30 PM, Monday-Friday. One hour of mandatory daily overtime currently required

Job Description Quality Control Inspector - 1st Shift

Job DescriptionBenefits: Life Insurance 401(k) Dental insurance Flexible schedule Health insurance Paid time off Vision insurance Benefits/Perks Flexible Schedule 401(k) Dental Insurance Heath Insurance Life Insurance Paid Time Off Vision Insurance Job Summary True Position Manufacturing is looking for a team member to perform final and in-process inspection. We are growing due to our customers' increasing demand and need additional skills in this area. We are looking for an experienced person, with minimum 5 years of experience, with an above average knowledge of blue print reading and application of customer specs. Responsibilities Conducting quality audits to ensure compliance with established standards and procedures. Performing manufacturing inspections to identify defects and deviations from quality requirements. Utilizing analysis skills to assess product quality and identify areas for improvement. Implementing quality control measures to maintain product consistency and reliability. Inspecting products using precision measuring instruments such as calipers and micrometers. Collecting and analyzing data to track quality metrics and performance indicators. Ensuring adherence to quality assurance protocols and standards. Managing quality systems and processes to optimize efficiency and effectiveness. Collaborating with cross-functional teams to address quality issues and drive continuous improvement initiatives. Familiarity with AS9100 and ISO900, and other relevant quality standards to uphold regulatory compliance. High attention to detail. Willingness to learn new skills. Willingness to work as a team. Must be a US Citizen or Permanent US Resident Experience: Dimensional inspection: 5 years (Required)

Segula Technologies is a global engineering and consulting leader, delivering cutting-edge solutions in aerospace, automotive, energy, rail, and life sciences. Established in 1985 and headquartered in France, we operate in over 30 countries, driving technological innovation, enhancing industrial performance, and supporting clients throughout the entire product lifecycle. Our expertise spans design, manufacturing, testing, and project management, empowering businesses to overcome complex engineering challenges while championing sustainability and innovation. Job Description Contract: Direct Opportunity with OEM Service Center Adhere to General Work Requirements. Perform Return to Service process and approve aircraft for return to service in accordance with the applicable regulations as authorized and delegated by the repair station accountable manager. Upon A/C arrival, obtain associated documentation, inventory and secure all aircraft documents as required. Perform inspections of aircraft, engines, parts and components, precision tools, equipment and other materials in accordance with applicable regulatory requirements. Inspect aircraft maintenance and in-process inspections for repairs and alterations performed by Aircraft Maintenance Technicians to verify and/or approve corrective actions. Upon receipt, perform inspection of all new, repaired and rebuilt parts / components for evidence for physical damage, count and conformity Ensure that all work packages (orders and forms) as well as records of arrival (debrief checklist) and maintenance actions performed are documented accurately and that all specialized customer forms, and Bombardier and Learjet forms (i.e., RED, RFE & SRPSA) are documented accurately. Research aircraft drawings and technical data (i.e., REO, EO, DCN) as required. Perform walk around inspection of aircraft prior to release from maintenance when required. Assist customers as required. Perform other tasks as required. Qualifications You typically have 3 to 4 years' aircraft maintenance experience You typically have 1 year corporate / commercial jet experience You have the ability to read and interpret engineering documents and maintenance manuals You have the ability to read, write, and understand the English language You have an Airframe & Powerplant (A&P) Certificate Additional Information Here's a quick overview of the next steps: Phone Interview with Recruiter: We'll start with an introductory call to learn more about your background and interest in the role. Onsite or Virtual Interview with the Hiring Manager Offer Letter: We will extend a formal offer and begin the onboarding process. Background Check & DOT Drug Screen: This step includes a thorough background check, reviewing criminal and other relevant records, along with a Department of Transportation (DOT) drug screening to ensure compliance with federal safety regulations. Start Your Next Challenge! #ZR

Quality Control Inspector (Manufacturing - Rubber Products) A well-established rubber manufacturing company in the Middletown area is seeking an experienced Quality Control Inspector to join their team on 1st shift. This is a contract-to-hire opportunity for someone who enjoys hands-on inspection work and takes pride in maintaining high-quality manufacturing standards. Pay Rate: $20 - $22/hour (based on experience) 1st shift, contract to hire What You'll Do Perform in-process and final inspections of rubber parts and finished products Conduct visual and dimensional inspections using calipers, micrometers, gauges, and other hand tools Ensure products meet quality standards, specifications, and customer requirements Identify, document, and report defects and nonconforming material Work closely with production teams to address and resolve quality issues Complete inspection records and basic quality documentation Support continuous improvement, safety, and housekeeping standards on the manufacturing floor What We're Looking For 2+ years of Quality Control or Inspection experience in a manufacturing environment Experience inspecting rubber, plastics, molded, or similar manufactured products preferred Ability to read and understand specifications, work instructions, or drawings Comfortable using measuring tools such as calipers, micrometers, and gauges Strong attention to detail and consistency Basic computer skills for documentation Dependable attendance and a positive, team-oriented attitude Nice to Have (Not Required) Experience with ISO or internal quality systems Familiarity with defect analysis or root cause identification Background in rubber manufacturing, molding, or extrusion Why This Opportunity? 1st shift schedule with steady hours Contract-to-hire potential Hands-on role where quality truly matters Competitive pay based on experience How to ApplyIf you have quality inspection experience and are looking for a long-term opportunity in manufacturing, apply today. Qualified candidates will be contacted to discuss next steps. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws. #R1

ID 2026-18112 The FPI Level II Inspector will perform nondestructive testing (NDT) using the Fluorescent Penetrant Inspection (FPI) method in accordance with applicable codes, standards, and customer specifications. The Level II Inspector is responsible for conducting inspections, interpreting and evaluating results, and documenting findings in compliance with NAS-410 or SNT-TC-1A certification requirements. Salary: $26.50/hr DOE Responsibilities Perform fluorescent penetrant inspections in accordance with approved procedures, work instructions, and specifications. Interpret and evaluate test results for acceptance or rejection determinations. Set up and verify equipment functionality and process parameters prior to inspection. Maintain accurate and detailed inspection records, reports, and data logs. Ensure proper use and maintenance of inspection equipment, materials, and process controls. Support process audits and continuous improvement initiatives within the NDT department. Follow all company safety policies, procedures, and quality standards. Provide guidance and on-the-job training to Level I personnel and trainees, as applicable. Skills / Qualifications High School Diploma or equivalent required; technical or associate degree preferred. Certification to NAS-410 or SNT-TC-1A Level II in Fluorescent Penetrant Inspection (FPI) required. Demonstrated experience performing FPI inspections in an aerospace, defense, or materials testing environment. Working knowledge of applicable industry standards (e.g., ASTM, MIL, or customer-specific specifications). Strong attention to detail with the ability to interpret complex technical requirements. Excellent communication, documentation, and organizational skills. Ability to work independently and collaboratively in a team environment. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) "If you need an accommodation filling out an application, or applying to a job, please email "