Quality control inspector jobs in Jefferson Valley-Yorktown, NY - 74 jobs

Pay Range: $30-45 Must be a US Citizen or US Person (Greencard Holder) to apply. This is a W2 contract with a 4-month duration. Seeking a Quality Control Inspector for our client specializing in aerospace and defense products. Must have the ability to work autonomously as well as collaborate effectively with a team and be capable of maintaining precision in a fast-paced environment while meeting deadlines. Responsibilities: * Inspect material (incoming and in-process per J-STD, IPC, and NASA standards) * Minimal lifting (under 25 pounds) * Provide Quality control activities * Document non-conformances and report major quality issues to leadership * First Article inspection Qualifications to Apply: * Certified inspector in MIL/Aerospace workmanship: J-STD, IPC-6110, NASA * US Person or Citizenship * HS Diploma or GED required, advanced degrees desired. * Minimum 5 years of experience gained in a manufacturing environment. * Technically competent, able to read and interpret engineering drawings. Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. #zr Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com. #ZR

Shift: Night Shift Job Function: The Quality Inspector is responsible for the accurate inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts and assemblies. Undergoes and carries out acquired training across various operational functions throughout the scope of the Inspection Dept., proactively improving the capability and capacity of operations. This position reports to the Quality Manager. Primary Responsibilities: * Confirm specifications, conducting visual and measurement tests in accordance with standard operating procedures. * Reject parts and assemblies that fail to meet specifications in accordance with standard operating procedures. * Measure parts with calipers, gauges, or micrometers. * Perform inspections in accordance with technical documentation. * Operate electronic inspection equipment and software. * Document inspections by completing required logs and forms. * Input data into electronic quality database. * Assist in maintaining measurement equipment by following operating instructions and calibration requirements; report repairs according to departmental instructions. * Follow all standard operation procedures. * Adhere to AS9100 and other quality standards. * Assist supervisor/manager, as needed, with various audits and compliance projects. * Report quality concerns to supervisor and/or management personnel. * Maintain safe and healthy work environment by following standards and procedures and complying with legal regulations. * Actively participate in training across prescribed Inspection functions, thereby fostering increased efficiency and product conformance. * Support departments in the day-to-day production of parts and assemblies. * Perform other duties and projects as assigned. Requirements: * Must have High school diploma or equivalent- documentation required * Must have basic math skills * Must meet ITAR definition of US Person(s)- documentation required * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to accurately and effectively perform assigned tasks and interpret results of inspections * Ability to meet critical deadlines and work in fast-paced environment * Basic computer knowledge; interfacing in PC environment * Attention to detail and strong analytical skill * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Work independently with minimal supervision * Ability to perform overtime when necessary * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Rate: $18-$20/Hour + 10% shift differential Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to remain stationary; sit for long periods of time, use hand to finger, handle, feel, stand, move throughout the facility, and reach with hands and arms. The employee is occasionally required to traverse stairs, climb or balance and stoop, kneel, crouch, or crawl. The employee must frequently lift, and/or position materials up to 15 pounds and occasionally lift and/or move up to 50 pounds with or without assistance. Work in manufacturing environment and use of computer (typical 2-button scroll mouse and keyboard - 35% of the work day). Specific vision abilities are required by this job include close vision, depth perception, and the ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting Job #**********NY to ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability.

Hamilton Connections is seeking candidates for a quality control inspector operating at a manufacturing company in Danbury, CT. The quality control inspector is responsible for testing, evaluating and documenting the quality of manufactured products. The hours are 3:30 p.m.-12 a.m., Monday-Friday. The job pays $28-$32 an hour, depending on experience. Job Responsibilities: Perform first piece, final and first article inspections of products to inspect for damage and/or defects Use measuring tools like calipers, micrometers and gages to inspect products Measure products for accuracy according to blueprint specifications Maintain accurate documentation and reporting Other duties as assigned Job Requirements: 5 or more years of quality control experience, including first piece, final and first article inspections Experience with precision measuring instruments, including calipers, micrometers, height gages, plug gages and thread gages Able to read blueprints Coordinate Measuring Machines (CMM), vision system and/or optical comparator experience Geometric Dimensioning and Tolerancing (GD&T) experience Familiar with ISO procedures a plus Organized, responsible and self-driven High school diploma or equivalent Able to pass pre-employment screenings

Join Mercury and become part of our world-class Quality team that supports the American warfighter on the battlefield, saving lives and defending democracy worldwide. As a quality inspector, you will ensure that our products deliver flawlessly every time, in the heat of battle giving our troops the winning edge when it matters most. You will be utilizing the requirements of IPC Industry Standards to ensure that the quality of our products meets the high demand of our end users. You will ensure optimal product quality by performing in-process visual verification of electronic assemblies, providing real-time feedback to operators, and documenting discrepancies accordingly. Job Responsibilities: Supporting Incoming, in-process and final inspection including customer source inspections Obtaining and upholding IPC credentials required of the position. Ensuring quality at a production line level by incorporating spot-inspection, sampling, and 1st-piece verification and 100% inspection as required. Verifying compliance of in-process material against Customer and Industry Standards Ensuring documentation is accurately recorded and collected. Escalating systemic issues to Quality and Manufacturing Engineering Supporting first-piece verification runs with accompanying documents. Documenting non-conformities to the process and specifications Initiating regular quality line-audits to ensure all documentation, consumables, and tooling are within check. Advocating proper ESD, PPE, and FOD prevention Required Qualifications: Typically requires 3+ years of experience in quality assurance of electro-mechanical inspection in a manufacturing environment J-STD-001 Class 3 and/or IPC 610 certified Physically able to spend up to 8 hours a day using a microscope Familiarity with IPC Industry Standards High-School Diploma Preferred Qualifications: Experience working in an ISO-9001 and/or AS9100 Quality System environment Operating appropriate inspection equipment; (AOI, XRAY, etc.…) Ability to communicate openly and effectively to provide real-time feedback Ability to work in a fast-paced team environment Customer-Focused, "Zero-Defect" Mindset Documentation Abilities Computer literacy Industry-Relevant Quality Inspection or Control experience Willingness to cross train in multiple Quality areas This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government.

We are seeking a detail-oriented and experienced Quality Inspector to join our team at our custom rubber manufacturing facility. The ideal candidate will be responsible for ensuring that products meet specified quality and reliability standards through inspections, measurements, and testing. This role requires a solid understanding of mechanical drawings, measurement tools, and quality control processes. -Salary range- $22.00per hour- $25.00 per hour -Benefits: 401(k) Aflac Dental insurance/ Vision insurance Health insurance reimbursement Life insurance Paid time off -Full Time- 8am to 4:30pm, Monday-Friday Responsibilities Interpret engineering drawings, schematic diagrams, and technical documentation to determine quality and reliability standards. Collaborate with management and engineering teams to address quality concerns and establish inspection criteria. Compile and evaluate statistical data to monitor and maintain product quality and consistency. Conduct in-process and final inspections of rubber products using precision measuring instruments (e.g., calipers, micrometers). Document inspection results, report non-conformances, and assist in root cause analysis and corrective actions. Validate data or flag deviations from standards through reports and quality documentation. Maintain accurate records of inspections and test results. Ensure compliance with company and industry quality standards and safety regulations. Qualifications Qualifications: High school diploma or equivalent required; additional technical training or certifications in quality inspection preferred. Minimum 2 years of experience in a manufacturing or quality inspection role, preferably in the rubber industry. Ability to read and interpret mechanical and engineering drawings. Proficient with measuring tools such as calipers, micrometers, and other gauges. Strong math and analytical skills. Computer literate: familiarity with MS Office and quality management systems is a plus. Excellent attention to detail, communication, and documentation skills. Ability to work independently and in a team environment. Physical Requirements: Must be able to stand for extended periods and lift up to 50 lbs. Manual dexterity for operating measurement tools. Ability to work in a manufacturing environment with exposure to noise, machinery, and rubber materials. Company Website *********************************

Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

Full-time Description A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components. Performs finished good inspections. Performs start-up and in process inspections. Monitors specific areas of production as directed by the Quality Control Supervisor. Makes measurements and records data as per inspection forms or job cards. Performs testing and records data for statistical process control (SPC) during manufacturing, (when required). Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern. Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern. Performs computer set up for label printing programs on cutting lines. Assists Engineering as needed for experimental testing. Enters finished goods inspection data into BMS as appropriate. Any other duties as assigned by supervisor. Requirements Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Ability to handle numbers required. Strong interpersonal skills. Ability to use micrometer, computers, testing equipment and electronic balance is essential. Experience using Excel is preferred. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent. Working Conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles. The noise level in the work environment is usually moderate. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing up to 15 lbs. Pay: $22.00-$24.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.

General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities * Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. * Conduct in-process inspections at specified intervals to monitor quality and verify requirements. * Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. * Accurately record inspection results in logs, check sheets, or digital systems. * Complete First Article Inspection Reports (FAIRs) as required. * Communicate non-conformances promptly to machinists, supervisors, or the quality manager. * Work closely with machinists, programmers, and setup personnel to validate machine setups. * Provide feedback to promote continuous improvement. * Ensure inspection activities comply with company standards and ISO/AS requirements. * Support calibration and proper use of inspection tools. * Maintain adherence to safety protocols and 5S practices. * Ability to detect deviations and recommend corrective actions. * Identifies potential quality risks before they become issues. * Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required * High school diploma or equivalent. * 2+ years of experience in machining, manufacturing, or inspection environment * Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) * Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) * Ability to read and interpret blueprints and technical specifications * Strong attention to detail and problem-solving skills * Good written and verbal communication skills * Experience with ISO 9001, AS9100, or similar quality management systems * Familiarity with statistical process control (SPC) * Knowledge of ERP/MRP systems or digital quality management tools. * Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements * Ability to stand, walk, or sit for extended periods. * Ability to lift to 50 lbs. occasionally. * Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

As a QC Technician, you will be a key player in ensuring product quality and safety throughout the production process of bread. Your role will encompass line auditing, environmental monitoring, air sampling, and participating in a monthly SQF audit. You will also be responsible for the calibration and verification of scales, monitors, and other basic instrumentation. Responsibilities * Conduct line auditing for bread production. * Perform environmental monitoring and air sampling. * Participate in monthly SQF audits. * Calibrate and verify scales, monitors, and other instrumentation. * Utilize MS Excel, Word, and Office for documentation. * Monitor and verify product quality following GMP. * Perform visual inspections and quality checks on product weights, codes, and labeling. * Address food safety issues and customer complaints with QA Supervisors. * Complete other periodic tasks as required. Essential Skills * Quality Control experience in the Food and Beverage industry. * High School Diploma. * Knowledge of Food Safety practices including SQF, FSMA, or HACCP. * Proficiency in Microsoft Word, PowerPoint, and Excel. * Ability to communicate effectively and work in a team. * Adaptability to change in a fast-paced production environment. Additional Skills & Qualifications * Bilingual proficiency is advantageous. * Experience in a GMP environment. * Familiarity with Environmental Monitoring, HACCP, SQF, Production, and Air Sampling. * HACCP or SQF Certification is a plus. * Passion for the food industry and a desire to grow in this field. Work Environment Join a thriving company known for its growth and expertise in the food industry. You will work in a dynamic Pastry Production facility, learning from leaders with over 20 years of experience in training technicians. The company imports and exports with European countries and distributes 300-500 additional items beyond their in-house manufacturing. This role offers an exceptional opportunity to expand your skills and contribute to a growing enterprise. Pay and Benefits The pay range for this position is $25.00 - $27.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Paterson,NJ. Application Deadline This position is anticipated to close on May 13, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description Principal Responsibilities Capable of reading and understanding complex drawings. Ability to use a variety of complex inspection gages and equipment. Performs visual and dimensional inspection of various mechanical components and assemblies to close tolerances. Identifies defects in surface, dimensional, visual and non-conformities (material, documentation and workmanship) to blue prints and Heim quality standards. Reports non-conformance of materials or unusual conditions to Quality management. Familiarity with Quality System(s) - ISO 9001, AS9100, etc. Coordinates and performs inspection processes and accepts product as a Designated Supplier Quality Representative for customers. Interacts with customers during source inspection. Completes paperwork. Reviews and interprets customer specifications. Maintains and updates delegation/regulatory documentation. Verifies material and process certifications for compliance with customer/regulatory requirements. Passes customer required Delegation Program Tests to achieve and maintain delegation approval. Inspects and accepts product under the FAA: PMA/TSO program as a Designated Manufacturing Inspection Representative. Prepares and signs FAA Airworthiness Approval Tags. Initiates and completes Fist Article Inspection Reports and other relevant quality reports. Maintains records, data and logs as necessary. Investigates and analyzes Quality issues and brings departments together to resolve problems. Provides written documentation and reports. Follows work procedures. Provides support to achieve short-term and long-term department / company goals. Provides leadership/training as needed. Ensures that production schedules and customer requirements are met. Maintains clean and safe work environment. Follows safety and environmental procedures and regulations. Reports safety incidents to supervisor. Makes recommendations for improvements to work processes and procedures. Contributes to 6 S programs in work area. Provides a high level of service to all internal and external customers. Contributes to positive teamwork environment. Performs other duties as assigned. Participates in training/learning other positions. Accomplishes related results as needed. Qualifications An AS degree in Industrial Technology or equivalent work experience of 6-8 years in a manufacturing environment, preferably in an aerospace manufacturing environment. “A” level Inspector or equivalent experience is required or any combination of knowledge, skill and experience to the satisfaction of the manager. Knowledge, Skills and Abilities Analytical Thinking Attention to Detail, thoroughness and accuracy Blueprint Reading Inspection Mechanical Ability Measurement and Test Equipment Communication (Speaking, Questioning, Listening) Computer (Word, Excel, Access) Customer focus Decision Making Dependability Initiative Interpreting Customer Requirements Organization Problem Solving Results Oriented Team Oriented Writing, documentation Knowledge Essential to the Position Customer requirements Inspection Techniques - Read and Interpret specifications Other: Travel: 25% Requires Certificates / Licenses: Customer Requirements / Quality Delegation Programs FAA

Job Description : Freshline Produce LLC., a premium fresh fruit and vegetable processor based in Mahwah, NJ, is seeking a talented Quality Assurance Technician, for its 1st shift, to join its fast growing organization. This is perfect opportunity for a candidate looking to begin their QA career in the food industry. Responsibilities: Incoming Raw Materials/ Inspection/ Inform QA Manager and Operations Manager if there are quality issues. Fill out Receiving Log Identify, label, date, and make a daily inventory list of all WIP products in the coolers Production Line Quality Checks including product quality, case quality, Tsunami checks, Metal detector check and room temperature checks Practice and enforce GMP regulations - (Hand washing, no jewelry, no gum) Recognize and examine all inventory at all times Serve as member HACCP Team Requirements: Good communication, training and interpersonal skills Very detail oriented Strong problem solving skills Bi-lingual (English and Spanish) is preferred Experience in the food industry is a plus Effective organizational skill; Able to manage priorities and complexities Intermediate computer skills Proficiency with Microsoft Word, Excel and Outlook Strong multi-tasking skills

Job DescriptionWhat a Day Looks Like In our Totowa, NJ facility, you start at the receiving dock-measuring, checking, and verifying that every pallet and part meets specification before it ever reaches production. You compare incoming materials to standards, note anything out of tolerance, and partner with suppliers to resolve issues quickly. Your careful records and clear communication keep our lines running smoothly and our quality uncompromised. What You'll Tackle Verify the quality of inbound materials against established specifications and acceptance criteria. Document and escalate any defects, discrepancies, or nonconformances discovered during inspection. Work directly with suppliers to address quality concerns and drive compliance. Perform routine audits of receiving workflows to uphold high-quality standards. Help develop and roll out quality assurance procedures and protocols. Maintain precise inspection logs, checklists, and quality assessment records. Contribute ideas and insights in team meetings to support continuous improvement. What You Bring High school diploma or equivalent; additional training in QA or a related field is a plus. Experience in quality assurance or receiving is preferred. Exceptional attention to detail and strong observational skills. Comfort working independently and collaborating with a team. Familiarity with quality control methods and tools. Clear written and verbal communication skills. Proficiency with basic computer applications and accurate data entry. Location: Totowa, NJ

The Quality INSEPCTOR position will be responsible for inspection of all incoming raw materials and finished products. Tasks will require use of calipers, micrometers, gauges, optical comparator, drawing comparisons and other inspection tools - candidate MUST have experience with relevant equiptment. Report, analyze and trend quality data (i.e. non-conforming material and inspection results). Work directly with suppliers to address quality concerns and assess performance. Responsible for specific quality programs as assigned, other related responsibilities as follows: Ensures company standard practices and cGMP procedures are followed. Issue Batch Records to production and Finished Good inspection records to Operations Maintains SOP binders and updates such through approved Change Controls. Participate in internal and external audit process Inspect and evaluate all incoming components and labeling Inspection and testing of finished goods Authorize release of Quarantined components for production use Responsible for calibration schedules for testing and production equipment PROVIDE SALARY HISTORY TO BE CONSIDERED Qualifications Relevant quality experience along with cGMP and 2 years experience preferred. Experience with FDA compliance regulations a plus Additional Information To be considered you MUST provide the following: Current resume Full Salary History Salary & Benefits : Salary will be based on experience Medical Benefits package available Schedule - F/T Monday to Friday 7:30 to 4:00 pm PLEASE NO RECRUITERS OR SOLICITATIONS! All your information will be kept confidential according to EEO guidelines.

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to operate all test equipment within the Laboratory Department Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Compile, review data and complete test reports IAW CTG Standards Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent with a minimum of 2 years' experience performing in-process and final inspection preferably in a machining, automotive or aerospace business Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word Independent; can work with limited supervision and direction Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements ASQ CQI certified or must completed certification within 1 year of accepting position Strong Electronics inspection knowledge preferred Must demonstrate acceptable vision requirement.

QUALITY CONTROL - WALDWICK NEW JERSEY START NOW !!!!!!!!!!!!!!!!!! ** We are looking for reliable and responsible candidate for warehouse associate in Waldwick. Pay rate: $13.50 (NEGOTIABLE DEPENDING ON EXPERIENCE) 2nd shift QA( Quality Assurance) Train for 2 weeks on 1st shift MONDAY - FRIDAY ( 7am-3:30pm) Regular hours MONDAY - FRIDAY 3pm-11:30pm OVERTIME AVAILABLE Must work weekends.( rotate) Requirements: Computer Knowledge, Inspecting Materials, Test Samples Able to stand all day performing this job. Bilingual is a plus Must have transportation Benefits offered - Health Care Sick Pay 401 k offered in 2021 MUST HAVE TRANSPORTATION!!!!!!!!!!!!!!!! Start now! Vaccinated

As a leader and innovator in the snack food industry for over 50 years, J&J Snack Foods provides branded snack foods to foodservice and retail supermarket outlets across the U.S. Its products include such icons as SUPERPRETZEL, ICEE, and Dippin' Dots along with other key brands like LUIGI'S Real Italian Ice, The Funnel Cake Factory Funnel Cakes, and Hola Churros. J&J also has a strong presence in bakery providing cakes, cookies, and pies to some of the largest grocery and convenience retailers in industry. Our company continues to deliver record sales led by a talented team and a commitment to “Fun Served Here”. POSITION SUMMARY: The Technician I, FSQA-Bakery is a contributing member of the team-oriented FSQA process, including responsibility for protecting the food by conducting food safety and quality sampling, testing, and completing required documentation to meet J&J Snacks Foods requirements. ESSENTIAL FUNCTIONS: The Technician I, FSQA-Bakery conducts food safety and quality assurance procedures to ensure J&J Snacks Foods is in compliance with expectations for food safety and quality. Understanding of and demonstrates J&J Snack Foods core values and acts with integrity, takes ownership in their work, proactively identifies the needs of our customers, generates creative and new ideas, and promotes an environment where our people and foods are safe. Understanding of the Food Safety and Quality Objectives and Global Food Safety and Quality Policy. Verifies all applicable J&J Snacks Foods expectations are met. Ensure that our foods meet J&J Snacks Foods standards and specifications. Participate in Pre-operational inspections with a cross-functional team. Physical bakery inspections, such as GMP and Hygiene, Food Safety, Foreign material, etc. Understanding and identification of non-conforming raw materials, semi-finished and finished foods. Communicate any human, food, or equipment safety concerns to Supervision immediately. Support the Hazard Analysis & Risk-Based Preventive Controls Food Safety Team in the participation of an effective Food Safety plan focused on the elimination of biological, chemical, physical, and economically motivated hazards from our foods. Conduct sampling, testing, and documentation of the J&J Snacks Foods procedures and records. Understanding and verification of 21 CFR 117 Subpart B Current Good Manufacturing Practices (cGMPs), Prerequisite and Preventive Control Programs and Critical Control Points (HACCP). Trained in and verification of Net Weight Policy and MAV limits. Verification of lot traceability, how packaging and raw ingredients are coded, coding of finished foods, and recipe verification against the manufacturing specification. Verification and understanding of Document Control and Record Completion Procedures. Verification and understanding of J&J Snacks Foods (i.e., GMP, Hygiene and Personnel Practices Program, Allergen Control and Preventive Control Program, Non- conformance Program). Performs other duties as assigned or required. COMPETENCIES: Effective work ethic Ability to operate scales, metal detection and imaging devices (if applicable), ovens and other instrumentation and measuring devices. Education, Technical Qualifications, Experience and Competencies Proficiency Level Required High School Diploma Reading, Writing and Math Skills Proficient computer skills including experience MS Outlook & Excel Must be able to work in a fast-paced environment and must also effectively manage and execute changes. Position requires ability to act as a member of a highly functioning team. Effective communication, writing, analytical, and critical thinking skills. Preferred Some college science courses or experience in the food industry. 1-2 years related experience. US Hourly Pay Range $18.50 - $20 USD Disclaimer: This position description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the team member. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. EEO Statement: J&J Snack Foods Corp.is an equal opportunity employer and prohibits discriminatory employment actions against, and treatment of, employees and applicants for employment based on actual or perceived Federal, State and local laws that prohibit employment discrimination on the basis of race, color, age, national origin, ethnicity, alienage, religion or creed, gender, gender identity, pregnancy, marital status, sexual orientation, citizenship, genetic disposition or characteristics, disability or veteran's status, sex offenses, prior record of arrest or conviction, genetic information or predisposing genetic characteristic, status as a victim or witness of domestic violence, sex offenses or stalking and unemployment status.

Quality Control Microbiology Analytics I, II, III QC Microbiology Analyst I The Quality Control Microbiology Analyst I serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst I will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology. Environmental monitoring in controlled environments: Non-viable particulate monitoring; Active viable air monitoring, Personnel monitoring, Surface sampling, Passive air monitoring Equipment monitoring: Ensure equipment is in proper working conditions; Ensure all equipment is properly; maintained/calibrated; Assist with routine laboratory testing; Plate reads and incubations Shipping of test samples and equipment to contract laboratories for testing Complete all documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP). REQUIREMENTS Associates degree in a science or relevant field required; Minimum 0-2 years of experience or equivalent experience. Environmental monitoring or within the biopharmaceutical industry experience preferred. Proficient with computer software such as; Microsoft Office Strong written and oral communication skills Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities Trained in GxP/GDP, Safety The QC Microbiology Analyst I must be able to maintain aseptic behavior within a cleanroom environment for an extended period. Must have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays and as required by the company Must be able to handle the standard/moderate noise of the manufacturing facility While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst II The Quality Control Microbiology Analyst II serves as a support role to clinical and commercial production. Microbiology Analyst II will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. This position will report into the Manager of QC Microbiology. Environmental monitoring in controlled environments; Non-viable particulate monitoring, Active viable air monitoring Personnel monitoring, Surface sampling, Passive air monitoring Equipment monitoring; Ensure equipment is in proper working conditions, Ensure all equipment is properly maintained/calibrated, Program equipment with proper workflows, Assist with routine laboratory testing, Plate reads and incubations Shipping of test samples and equipment to contract laboratories for testing Produce documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP) Writing/conducting investigations pertaining to environmental monitoring and testing Develop and train QC Microbiology Analyst I personnel on relevant business processes. REQUIREMENTS BA/BS in a science or relevant field required or equivalent experience; Minimum 2-4 years of experience with environmental monitoring or within the biopharmaceutical industry. GxP/GDP, Safety Trained Proficient with computer software such as; Microsoft Office, MODA/LIMS Familiarity with ISO and EU standards Strong written and oral communication skills Technical training ability Must have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays, and as required by the company Must be able to handle the standard/moderate noise of the manufacturing facility The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period. Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. QC Microbiology Analyst III The Quality Control Microbiology Analyst III serves as a support role to clinical and/or commercial production. The QC Microbiology Analyst III will coordinate data for batch release, participate in project/client meetings, and author/revise environmental monitoring procedures. Additionally, the QC Microbiology Analyst will perform environmental monitoring activities including, but not limited to, non-viable particulate testing, active air viable, passive air viable, surface viable, and personnel monitoring. Documentation according to written Standard Operating Procedures in accordance to Current Good Manufacturing Practices (cGMP) and Good Documentation Practices (GDP). Coordinates data for batch release Participation in project/client meetings and communications, providing scientific and technical expertise Authoring/revising Standard Operating Procedures, Work Instructions, Forms, and Protocols Review of investigations and documentation of non-confirming events and environmental excursions. Apply expertise of compliance requirements to maintain an inspection-ready state. Participate and act as subject matter expert during audits/inspections Develop and train QC Microbiology Analyst II on relevant business processes Processing of purchase orders for outsourced testing and lab supplies Coordinates work orders REQUIREMENTS BA/BS in a science or relevant field required or equivalent experience; Minimum 5-7 years of experience with environmental monitoring or within the biopharmaceutical industry GxP/GDP Trained Proficient with computer software such as; Microsoft Office, MODA/LIMS, Microsoft Visio (preferred), Netsuite (preferred), Maximo Asset Management System (preferred) Proficient knowledge of ISO and EU standards Strong knowledge of quality systems and ability to interpret Quality standards for implementation and review. Strong written and oral communication skills Strong technical writing skills Technical training experience Must be detail oriented, can multi-task, work in a team environment, and have the flexibility to adapt to company growth as well as its evolving responsibilities Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen. Must have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays and as required by the company Must be able to handle the standard/moderate noise of the manufacturing facility Working Environment While performing the duties of this job, the employee may occasionally be exposed to infectious diseases transmittable through human blood, tissues, or bodily fluids and are expected to utilize universal precautions with all human specimens. Must utilize proper personal protective equipment (PPE) when handling all human specimens, gases, corrosive chemicals, and liquid nitrogen. Other exposures may include gases (nitrogen), or corrosive chemicals (Clorox, potassium hydroxide), or exposure to liquid nitrogen. The noise level in the work environment is moderately noisy. Must have the ability to work in a team-oriented environment and with clients Must be able to work during the weekend, holidays, and as required by the company Must be able to handle the standard/moderate noise of the manufacturing facility Physical Requirements The QC Microbiology Analyst II must be able to maintain aseptic behavior within a cleanroom environment for an extended period. Must be physically capable to stand; walk; site; bend; stretch; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. Occasionally personal protective equipment may be required including lab coat, latex gloves, safety glasses and/or respirator. Please note these job descriptions are not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionDescription: A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components. Performs finished good inspections. Performs start-up and in process inspections. Monitors specific areas of production as directed by the Quality Control Supervisor. Makes measurements and records data as per inspection forms or job cards. Performs testing and records data for statistical process control (SPC) during manufacturing, (when required). Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern. Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern. Performs computer set up for label printing programs on cutting lines. Assists Engineering as needed for experimental testing. Enters finished goods inspection data into BMS as appropriate. Any other duties as assigned by supervisor. Requirements: Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Ability to handle numbers required. Strong interpersonal skills. Ability to use micrometer, computers, testing equipment and electronic balance is essential. Experience using Excel is preferred. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent. Working Conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles. The noise level in the work environment is usually moderate. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing up to 15 lbs. Pay: $22.00-$24.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.