Quality control inspector jobs in Jeffersonville, IN - 47 jobs

DEPARTMENT: Lab Lab Technician REPORT TO: QA Manager CLASSIFICATION: Special Skilled/Non-Exempt WORKING HOURS: Full Time, 12-hour shifts Nights (7P - 7A), Overtime as needed DUTIES AND RESPONSIBILITIES: Including, but not limited to, the following: Perform daily analytical and microbiological testing on incoming “raw” products, on-line samples, and finished products following established guidelines and procedures. Complete data entry in the Food Safety System as well as the internal ERP System. Accurately report and document test results and complete appropriate forms, reports. Be able to recognize abnormal results and lab equipment malfunctions, be able to make appropriate decisions in relation to quality issues. Communicate out of spec results to QA manager. Organize work to obtain maximum efficiency. Do general routine maintenance and QC of equipment and cleaning in area. Perform weekly environmental swabbing. Present a positive attitude toward job, co-workers, and other departments. Use appropriate resource materials. Complies with plant regulations concerning GMP's (Good Manufacturing Practices), safety requirements and work rules, and loss control procedures. Responsible for identifying and addressing any food safety hazards. In the event that a food safety hazard is identified, the employee is to notify their supervisor, a member of Quality, or a member of the Leadership Team. Employees are empowered to immediately address a food safety hazard if they have the ability. Responsible for attending all required safety and food safety training. Perform any and all duties as assigned by supervisor. Must exhibit accuracy and repeatability in all areas of testing. ACCOUNTABILITY: In the absence of the Lab Technician, the QA Manager will be responsible for assigning another trained operator to do this job. REQUIREMENTS: Must be neat and clean. Must be punctual. Must have good computer skills. Microsoft Office, ERP Systems, etc. Must have good manual dexterity. Must present a positive attitude toward co-workers and job. Must do other work as assigned. Must obtain certification for testing of raw milk, UK Regulatory Services. Must obtain certification for antibiotics, micro testing, Kentucky Dept for Public Health. OTHER PHYSICAL REQUIRMENTS: Physical Demands: Standing, walking, sitting, bending, stooping, pushing, pulling, kneeling, reaching, twisting, lifting, climbing ladders and stairs, and carrying up to 85 pounds. Environmental Demands: Noise levels above 85 DBA. Hot and cold working conditions. Job Hazards: Caustics, acids, chlorine, ammonia, high pressure steam and water, hot equipment, trucks fork lifts, conveyers, mechanical hazards, slick or wet floors, confined space entry, elevated work areas on platforms, and equipment above 10 feet. Other Job Requirements: This job description in no way states or implies that these are the only duties to be performed by this employee. He/she will be required to follow any other instructions and to perform any other duties requested by management. Excellent Benefits: medical, dental, vision and life; air evac coverage, PTO, sick days, holiday pay, matching 401K

Are you ready to start "Building America"? At Lexicon, we're seeking a skilled Quality Control Inspector to join our team and be a part of our continued success. Offering competitive pay ranging between $27-$32/hr, this role presents an exciting opportunity for growth and development! If you're passionate about being a part of a team that values integrity, teamwork, and innovation, then Lexicon is the place for you. Join us and become a part of our growing family as we continue to build a brighter future together. Apply now to embark on an exciting journey with Lexicon! Lexicon Benefits * Health, Dental, Vision, and Life Insurance * HSA with employer contributions * Life Insurance * Paid Holidays and Vacation * 401k with company match * Lexicon University Our Lexicon University provides free career development and training, so employees can improve their skills in their chosen field, learn new skills in another area and build a career path that leads to job satisfaction and success for them and their families. Quality Control Inspector Overview: Join us as a Quality Control Inspector, where you'll play a pivotal role in upholding the highest standards of production in our Maintenance location. Your responsibilities will include ensuring adherence to shop drawings and American Welding Society specifications, guaranteeing the quality and integrity of materials. Safety is paramount in this position, as any oversight in performing essential duties could pose risks to our team and the wider community. If you're ready to make a meaningful impact by maintaining excellence and safety in our operations, this opportunity awaits you. Join us in shaping a future where quality and safety go hand in hand. Quality Control Inspector Pay Range: * $26-$32/hr * Paid WEEKLY Quality Control Inspector Essential Duties and Responsibilities: * Inspect structural steel for plumb, level, and elevation per AISC Codes and Standards. * Inspect welding and handling of welding materials for compliance with drawings and governing standards. * Inspect bolted and/or riveted structural connections by fastening materials, faying surfaces, tension, etc. * Assist in the inspection of materials received on the job site. * Assist in the inspection of all phases of steel erection, equipment installation, etc. * Perform on site internal audit to confirm, or establish compliance with AISC, AWS, and company QA/QC Manual. * Ensures compliance of AISC and AWS Standards with company subcontractors. * Work within guidelines provided in company QA/QC Manual and apply codes and standards offered by related governing bodies such as AISC and AWS. * The ability to work overtime and regular, punctual attendance is required. * Perform non-essential functions as needed. Quality Control Inspector Qualifications: * High School education or the equivalent is required. * Minimum of two years' experience in construction industry and/or welding. * Certified Welding Inspector (CWI) may be required. Must be proficient in reading and interpreting structural steel drawings. * Must have excellent communication skills. * You must be legally authorized to work in the United States for our company without the need for current or future visa sponsorship. Note: The company does not provide employment visa sponsorship. Quality Control Inspector Physical Demands: * Must be able to climb to heights more than 300 feet. * Overtime and overnight travel are required. * Must be able to lift to 100 pounds occasionally. * Must be able to tolerate loud noises and temperature fluctuations. This role is classified as safety sensitive. Candidates must show the capacity to proactively initiate, effectively lead, and consistently uphold safety policies, practices, procedures, and housekeeping standards. Compliance with this requirement is a fundamental condition for employment. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email: ********************* Drug Free Workplace Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese To see other positions, click here.

Temp Immediate opening for a Quality Inspectors in the Jeffersonville, IN area. All candidates must be able to pass a pre-employment drug screen and criminal background check. * Automotive Manufacturing and/or Quality Control Experience a plus * Familiar with containment - inspection, sort and rework of components * Long term contract assignment * Fluent in spoken and written English * High school diploma or GED preferred * Must be 19 years of age or older * Must be a team player, take directions and have a sense of urgency * Mature, professional attitude, reliable transportation and professional appearance required Various, Jeffersonville, IN 47130, United States of America

At Canadian Solar, our vision is to make lives better by bringing electricity powered by the sun to millions of people worldwide. As a leading manufacturer of solar panels, inverters, and energy storage solutions, we've been an industry front-runner since our founding in 2001. Our commitment to sustainability is reflected in all parts of our organization as we navigate the complexities of a booming industry. Throughout Canadian Solar's subsidiaries, e-Storage, Recurrent Energy, MSS and CSI Solar Co., we invest in our employees' growth. Our training programs and promotional opportunities ensure we all can continue to learn. We understand the importance of work-life balance and provide various flexible work options to support our employees' well-being. Join our team to "Make the Difference" by creating a lasting positive impact on the world and the communities where we operate.

FORTNA partners with the world's leading brands to transform omnichannel and parcel distribution operations. Known world-wide for enabling companies to keep pace with digital disruption and growth objectives, we design and deliver solutions, powered by intelligent software, to optimize fast, accurate and cost-effective order fulfillment and last mile delivery. Our people, innovative approach and proprietary algorithms and tools ensure optimal operations design and material and information flow. We deliver exceptional value every day to our customers with comprehensive services and products including network strategy, distribution center operational design and implementation, material handling automated equipment, robotics and a comprehensive suite of lifecycle services. At FORTNA, we believe in fostering a workplace that isn't just a job but a movement - a collective effort to redefine success and transform challenges into opportunities. "Join the Movement" encapsulates our commitment to a workplace culture that thrives on collaboration, celebrates diversity, and empowers every individual to contribute to something greater than themselves. Our Team. Our Passion. Our Approach. The Quality Inspector will be responsible for inspection of cut, formed, weld fabricated, machined or assemblies for adherence to engineering drawings. ESSENTIAL FUNCTIONS: Interpretation and understanding of shop drawings to determine if a part is made to print. Examples are: * Weld symbols * Geometric dimensioning and tolerancing symbols * Print legend and notation The ability to use measuring instruments to verify whether a product is conforming to shop drawings. Examples include Micrometer, Caliper, Jo blocks, Pin gage, Tape measure, Dial indicator Manual Dexterity and ability to lift to 30 lbs. Must be able to distinguish color in this position and the ability to read small print and distinguish fine details. Reading skills to understand instructions, plans, or purchase orders. Good communication skills enabling verbal and written communication using active listening and learning. Tasks include but are not limited to: * Process Production reject tags, issuing a Quality Hold. * File Maker system for accurate product disposition with basic computer skills. * Issue Quality Hold for all nonconforming material. * Help investigate out of process activities and assist with containment of nonconforming material. * Review process check sheets for completeness. * Data collection with part verification inspection * Audit defined processes for adherence to the process. QUALIFICATIONS * High school diploma (or GED). * Prior manufacturing experience, with some aspect of Quality inspection (preferred). * Prior experience in metal fabrication a plus or welding/layout experience (preferred). * Basic blueprint reading skills and welding symbols. * The ability to use basic computer programs such as Word, Excel, PowerPoint, and Outlook. (preferred) * Must have ability to use appropriate tools related to the task. This describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. 1st shift * This position offers a base hourly rate of $21.00. This job description describes the general nature and level of work expected of a person assigned to this position. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. Employees may be required to perform any other job-related duties as requested by their supervisor. It is the policy of FORTNA and its affiliated companies to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, pregnancy or pregnancy-related condition, status with regard to public assistance, veteran status, citizenship status (if authorized to work in the U.S.), or any other characteristic protected by federal, state or local law. In addition, FORTNA will provide reasonable accommodations for qualified individuals with disabilities.

To promote quality assurance practices are being utilized in all areas. Responsible for performing a variety of tasks, including but not limited to, inspection of the making, packing, and assisting in the production of quality products. Conduct testing by proscribed methods and procedures to insure products have been fully tested and proven to meet acceptable test criteria. Methods and materials must produce a safe high-quality product that is reproducible in manufacturing. ESSENTIAL DUTIES AND RESPONSIBILITIES: Including but not limited to the following. Other duties may be assigned according to role and department needs. · Pay attention to detail while performing tasks with accuracy · Ability to work both independently and in a team environment with speed, while maintaining high quality products and standards · Perform inspections of the belt and pallet checks · Complete paperwork of all required quality checks · Notification of quality issues to appropriate personnel · Complete paperwork in a timely manner, accurately, and legibly · Promote and maintain good housekeeping practices · Promote safety and maintains a safe and organized environment · Promote production of good quality products · Exercise good judgment and respond positively to instructions and follow standard policies and procedures Lifting required to 45lbs. MAYFIELD CONSUMER PRODUCTS is an EEO Employer - M/F/Disability/Protected Veteran Status View all jobs at this company

Job description United Talent is immediately hiring Quality Assurance Associates in Louisville, KYJob Responsibilities: Conducting quality inspection of parts for a major company Stacking the good parts on pallets Placing the defected parts in a bin Pay and Shift: 7 am - 3:30 pm Monday-Friday, $14 per hour Requirements: Pass a background check and drug screen Ability to stand entire shift Steel toed shoes Long pants Lift up to 30 pounds Perks and Benefits: Referral Bonus(each referral you send that works 40 hours you will receive $80. When they work 100 hours, you will receive $200) Weekly pay via direct deposit or pay card Medical benefits available How to apply: give us a call at (502) 390-2131 or text at (502) 206-4815 or apply directly at utalent.com. You can always come see us in person as well! Office hours are Monday - Friday 8am-5pm. Our address is 10013 Forest Green Blvd, Louisville KY 40223EEO

Our client desires a quality control specialist to join its established team. This position involves evaluating, assessing, and re-evaluating company-wide processes that affect individual quality to ensure customer expectations are exceeded. Job Responsibilities: Inspection of the product before secondary finishing or shipping. Measure products to ensure order specifications. Verify required documentation and report any failures Remove any rejected items from the workflow and prevent shipment. Provide feedback on all findings Complete reports as required Job Requirements: High school diploma or GED required Excellent job tenure Minimum of 2 years printing experience Ability to Distinguish between minimal color variances. Excellent attention to detail Capable of reading, interpreting, and creating correspondence and memos Microsoft Office skills Excellent verbal and written communication skills. Ability to read and effectively use measuring devices. Shift Details: 6 AM - 6 PM F-SUN: $20/hr

Job Description FOR A STUDENT.** MGP Ingredients is a leading supplier of premium distilled spirits and food ingredient solutions. Its Distilling Solutions segment provides bourbons, whiskeys, ryes, gins and vodkas to craft and multinational brands. MGP's own Branded Spirits business is growing following the 2021 acquisition of Luxco, a top spirits producer, bottler, supplier, and importer. Ingredient Solutions delivers nutritional, functional wheat- and pea-based ingredients aligned with consumer trends. The company operates in locations across the Midwestern U.S., and overseas in Northern Ireland and Mexico. THE OPPORTUNITY Under the guidance of the Process Engineer and Distillery Operations Manager, the Quality Control Technicians work closely with all distillery staff. Working with Distillers and barrel fillers to ensure distillation and barrel filling is conducted in a quality manner while ensuring government regulations and internal specifications are met. WHAT YOU WILL BE DOING: Responsible for all laboratory analyses of all samples submitted to QC Laboratory to ensure internal specifications and external government regulations are met. Perform beverage laboratory testing, including distillation, titration, specific gravity and proof checks, brix determination, pH testing, and organoleptic analysis. Effectively operate HPLC and GC instrumentation for analyzing raw distillate. Operate and calibrate (pH meter) lab instrumentation. Responsible for testing Reverse Osmosis system daily to ensure internal specifications. Perform accurate and timely data entry and record-keeping in Quality Control systems. Communicate effectively with other Lux Row departments. Responsible for troubleshooting equipment issues and ensuring all equipment is always running properly. Produce Logs and Reports based on findings from all testing on periodic basis. All other duties assigned by the Quality Control Manager or Distillery Operations Manager WHO WE ARE LOOKING FOR: Be a student currently enrolled in a Chemistry, Biology, or related major at a college/university. Must possess a strong working knowledge of Microsoft Windows and Office including Excel and Word. Candidate must be self-motivated, dependable, detail-oriented, and able to work independently. Laboratory experience is preferred.

FOR A STUDENT.** MGP Ingredients is a leading supplier of premium distilled spirits and food ingredient solutions. Its Distilling Solutions segment provides bourbons, whiskeys, ryes, gins and vodkas to craft and multinational brands. MGP's own Branded Spirits business is growing following the 2021 acquisition of Luxco, a top spirits producer, bottler, supplier, and importer. Ingredient Solutions delivers nutritional, functional wheat- and pea-based ingredients aligned with consumer trends. The company operates in locations across the Midwestern U.S., and overseas in Northern Ireland and Mexico. THE OPPORTUNITY Under the guidance of the Process Engineer and Distillery Operations Manager, the Quality Control Technicians work closely with all distillery staff. Working with Distillers and barrel fillers to ensure distillation and barrel filling is conducted in a quality manner while ensuring government regulations and internal specifications are met. WHAT YOU WILL BE DOING: Responsible for all laboratory analyses of all samples submitted to QC Laboratory to ensure internal specifications and external government regulations are met. Perform beverage laboratory testing, including distillation, titration, specific gravity and proof checks, brix determination, pH testing, and organoleptic analysis. Effectively operate HPLC and GC instrumentation for analyzing raw distillate. Operate and calibrate (pH meter) lab instrumentation. Responsible for testing Reverse Osmosis system daily to ensure internal specifications. Perform accurate and timely data entry and record-keeping in Quality Control systems. Communicate effectively with other Lux Row departments. Responsible for troubleshooting equipment issues and ensuring all equipment is always running properly. Produce Logs and Reports based on findings from all testing on periodic basis. All other duties assigned by the Quality Control Manager or Distillery Operations Manager WHO WE ARE LOOKING FOR: Be a student currently enrolled in a Chemistry, Biology, or related major at a college/university. Must possess a strong working knowledge of Microsoft Windows and Office including Excel and Word. Candidate must be self-motivated, dependable, detail-oriented, and able to work independently. Laboratory experience is preferred.

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Frankfort, KY. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability to walk and stand for long periods of time Ability to bend, lift, twist and move freely Ability to periodically lift/move up to 50 pounds Must have reliable transportation Values & attitudes Global team spirit Team player Caring for people Open-minded Excellence Reactive Resilient to pressure Rigorous Customer focus Client oriented Reliable & trustworthy Flexible Initiative Autonomous Innovative Daring Work experience Overall recommendations No experience necessary Ability to read blueprints a plus Education background Overall recommendations High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Frankfort, KY. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development * Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations * Check/inspect manufactured parts or products for defects * Read and follow work instructions and general processes * Use measuring or testing equipment as needed * Ensure products meet quality standards * Display excellent customer service * Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management * Collect and record data Technical * Utilize company portal for time recording and policy acknowledgements Other * Any other duties as assigned Knowledge, skills, abilities Hard skills * Must be able to speak and read in the English language * Good communications skills * Must be able to multi-task * Ability to work in a fast-paced environment * Ability to handle sensitive and confidential material * Ability to walk and stand for long periods of time * Ability to bend, lift, twist and move freely * Ability to periodically lift/move up to 50 pounds * Must have reliable transportation Values & attitudes Global team spirit * Team player * Caring for people * Open-minded Excellence * Reactive * Resilient to pressure * Rigorous Customer focus * Client oriented * Reliable & trustworthy * Flexible Initiative * Autonomous * Innovative * Daring Work experience Overall recommendations * No experience necessary * Ability to read blueprints a plus Education background Overall recommendations * High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability.

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Quality Technician (3rd Shift Sunday - Thursday 10:30pm - 6:40am) We are AUTOKINITON (pronounced auto-ken-i-TAHN) AUTOKINITON is a Michigan-based family of automotive companies delivering operational excellence, high-quality execution, and customer service. We offer 100% vertical integration capabilities such as end-to-end engineering, manufacturing, and in-house logistics. We're proud of our Tier 1 supplier legacy for manufacturing propulsion-agnostic, structural automotive components, and assemblies around the globe. To help us drive excellence, you'll get to: * Responsible for inspection, tests, surveillance, and quality operations support including monthly Instron destructs. * Collects data and enters into appropriate reporting tools: GDM, PAX-IT, etc. * Initiate containment and countermeasure processes when necessary (Quality alerts both internal and external) This Full-time hourly role is a part of our Quality team and reports to the Quality Supervisor. Required experience: * Excellent time management skills with the ability to multitask and prioritize. * Excellent computer skills and ability to learn various computer programs. * Detail oriented with excellent follow-up skills. Working conditions: * We'll provide position-specific details including physical and focused efforts, working environment and conditions, and reasonable accommodations during the interview process. Where you'll be: This position is located at our Shepherdsville Facility, in Shepherdsville, KY, offering many community events, resources, programs, and recreational opportunities for you and your family. Community features: * Jim Beam Distillery * Churchill Downs * Bernheim Arboretum & Research Forest Why you'll enjoy working here: * Competitive Wages and Comprehensive Benefits: Medical, Dental, Vision, 401(k) with Company contribution match, and 14 paid holidays, including a bridge holiday in December. * Work-Life Balance: Many of our Associates have stayed with us for 25+ years! It takes a good work-life balance to make it that far. We support your personal and professional priorities as they impact your well-being. * Growth Opportunities: Take your career to the next level through tuition reimbursement programs, on-the-job training, learning management systems, and advancement opportunities from within our organization. * Learning and Development: We empower all our Associates - from entry-level to senior-level - with the skills and knowledge necessary to succeed in their current roles and beyond at AUTOKINITON. AUTOKINITON Promotes a dynamic and collaborative work environment for everyone. AUTOKINITON is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. AUTOKINITON makes hiring decisions based solely on qualifications, merit, and business needs at the time. Posted Date 1/8/2026

Quality Control Specialist SUPERVISOR: Supervisor STATUS: Non-Exempt The QC Specialist will perform quality control reviews of the Housing Choice Voucher program's files to ensure compliance with HUD Regulations and the PHCD Administrative Plan. SUPERVISION RECEIVED AND EXERCISED: Operates under the direct general supervision of a Supervisor; the Quality Control Specialist exercises no supervision over other employees. ESSENTIAL DUTIES AND RESPONSIBILITIES The below statements are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing of all responsibilities, duties and/or skills required. Other duties may be assigned: Conducts monthly review of tenant files, identifying improper application of policies and procedures by staff members, to ensure compliance with HUD Regulations and PHCD Administrative Plan. Conduct annual Section Eight Management Assessment Program(SEMAP) review of files Assists in the training of new employees to ensure the Housing Specialists will have a working knowledge of the HCV Program Uses the QC knowledge bank, NMA Wiki, PHCD Administrative Plan, and other resources to ensure maximum accuracy for citing errors and comments. Conduct peer to peer reviews to provide support as a mentor to new and existing housing specialists Create weekly report in an accurate format as requested and updated by the QC Supervisor and delivers the report timely each week. Respond to disputes for errors cited from the housing specialist in a timely fashion Other file audits as necessary Other duties as assigned DESIRED QUALIFICATIONS: High School Diploma; Education equivalent to a two-year degree from a regionally accredited institution in Public Administration, Social Science or a closely related field; a minimum of two years of progressively responsible work experience for a public agency, or related work in the social service or community service field preferred. Alternatively, a two-year degree with four years of experience will satisfy the qualifications. Must have the ability to interpret and apply regulations pertaining to the program. Must be able to communicate effectively both orally and in writing and have excellent interpersonal skills and possess strong computer and organizational skills.

The Quality Technician tests and inspects material, product, and processes at various stages of production in a precast concrete manufacturing environment. Essential Duties and Responsibilities Maintain a safe work environment and follow all published/posted safety policies. Performs all aspects of the pre-manufacture inspection process, and during and after Production to meet Quality requirements. Accurately enters Production and Quality data into computer system. Identify, document, and report any Quality problems to Production or Quality Management. Look for opportunities to improve material, processes, and products. Ensures cleanliness of the lab, testing areas, and equipment. Leads by example when displaying the core values, honesty, integrity, work ethic, and respect for others. Treats production and yard teams as the customer when performing timely inspections on products and processes. Works as a team player. Strives to better himself/herself daily through continuous learning and developing other's technical knowledge. Basic Qualifications High school diploma Other Required Qualifications Basic PC skills, such as using Microsoft Word and Excel. Strong attention to detail. Good verbal and written communication skills. Ability to read blueprints and/or Production Drawings. Ability to perform analytical and math functions. Basic understanding of test measurements. Problem-solving skills. Preferred Qualifications Experience performing concrete tests. Physical Requirements Office: Move 25 lbs. (not for all jobs, reasonable accommodations will be made), work with a computer for extended periods of time. Plant/Yard: Move minimum of 50 lbs., spatial awareness/depth perception, walk, climb, bend at the waist, reach, forceful use of hand tools, vocal projection. Work Environment Plant/Yard: All types of weather conditions (year-round, Midwest and Northeast), dirt/dust, noise from heavy machinery/vehicles, vibrations from machinery and vehicles, loud noises, little to no climate control, varying amounts of light, stairs, narrow walkways.

Quality Technician / Quality Inspector Full-Time | 2nd Shift | On-site The Quality Technician supports the Quality Department by ensuring products and processes meet internal standards and customer expectations. This role performs audits, inspections, and documentation activities to maintain compliance with quality management systems and promote continuous improvement. Essential Duties & Responsibilities Perform receiving and dock audits on finished goods and raw materials based on quality concerns or routine sampling. Conduct process audits within the organization as requested. Ensure FIFO and 5S procedures are followed throughout the department. Perform in-process inspections to verify correct dimensions, material tolerances, and overall product quality. Sort nonconforming products and report results to the Quality team. Track daily scrap and submit reports to Quality leadership. Recommend and help train temporary staff for sorting tasks as needed. Immediately report any nonconformance issues. Document and submit discrepancies to Quality leadership. Assist with preparation, packaging, and labeling of trial shipments. Contribute to internal and external audits as needed. Perform all inspections and audits according to established procedures. Qualifications Minimum Education & Experience High school diploma, GED, or equivalent. 12 years of experience in a manufacturing or production environment. Knowledge, Skills & Abilities Ability to operate hand jacks, scales, and measuring equipment. Strong attention to detail and ability to work independently. Effective communication and problem-solving skills. Computer Skills Proficiency in Office 365 or similar software. Experience with RF scanners. Familiarity with ERP systems (JDE preferred). Certificates / Licenses Valid drivers license. Supervisory Responsibilities None. Physical Demands & Work Environment Frequent standing, walking, reaching, and use of hands. Occasional sitting, stooping, kneeling, crouching, or crawling. Ability to lift and move up to 25 lbs regularly. Exposure to moving mechanical parts; moderate noise level. Ability to work independently with minimal supervision. Must work on-site 100% of the time. Schedule 2nd shift position. Overtime may be required based on production needs.

Job Description Ventek Solutions (Ventek) is a leading manufacturer specializing in engineered shape molded foam components, protective packaging, and multi-material assembly solutions. The organization helps customers address complex challenges in product protection, component light-weighting, insulation, and design simplification. Ventek's services span a variety of industries, including construction, automotive, electronics, medical, and more. Ventek Solutions leverages creative design, thoughtful engineering, and meticulous program management to deliver customized solutions. Ventek operates 8 plants in the US and Mexico with corporate headquarters in Charleston, SC. Position Summary We are seeking an experienced Quality Tech 1 - 3rd shift 10pm - 6:30 am Mon - Friday Join our dynamic team as a Quality Technique Specialist, where your expertise will play a critical role in ensuring our products and services meet the highest standards of excellence. As a Quality Technique Specialist, you will be at the forefront of implementing and refining quality assurance processes, driving continuous improvement, and ensuring compliance with industry regulations. **Key Responsibilities:** - Develop, implement, and maintain quality assurance protocols and procedures. - Conduct thorough inspections and tests to ensure product compliance with specifications and standards. - Analyze data to identify areas for improvement and recommend effective quality enhancements. - Collaborate with cross-functional teams to resolve quality-related issues and implement corrective actions. - Document COA's COC's as required - Must know which measurement and test equipment(M&TE) tools are appropriate for various task and how to assess tool accuracy and precision; understand the concept of standards traceability for M&TE> - Train and mentor team members on best quality practices and continuous improvement methodologies. **Qualifications:** - Proven experience in quality assurance or a similar role. - Strong understanding of quality control methodologies and tools. - Excellent analytical and problem-solving skills. - Effective communication skills, with the ability to collaborate with diverse teams. - Proficiency in using relevant software and tools for quality management. - Quality certification (e.g., Six Sigma, ISO) is a plus. **Benefits:** - Competitive salary and performance-based bonuses. - Comprehensive health, dental, and vision insurance. - Opportunities for professional development and growth. - Collaborative and innovative work environment. - Flexible working hours and a generous vacation policy. If you are passionate about quality techniques and are eager to contribute to a forward-thinking organization, we encourage you to apply for this exciting opportunity. Join us and be a part of a team that values quality and strives for excellence in everything we do.

Job Description TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Frankfort, KY. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability to walk and stand for long periods of time Ability to bend, lift, twist and move freely Ability to periodically lift/move up to 50 pounds Must have reliable transportation Values & attitudes Global team spirit Team player Caring for people Open-minded Excellence Reactive Resilient to pressure Rigorous Customer focus Client oriented Reliable & trustworthy Flexible Initiative Autonomous Innovative Daring Work experience Overall recommendations No experience necessary Ability to read blueprints a plus Education background Overall recommendations High School Diploma or Equivalent recommended or comparable work experience About TRIGO Global Quality Solutions Founded in 1997, TRIGO is a multinational company providing operational Quality Management solutions for the manufacturing sector, especially in the automotive and aerospace industries. With a team of more than ten thousand professionals present in 20+ countries across 4 continents, TRIGO offers a comprehensive portfolio of Quality Assurance services ranging from inspection to expert auditing, consulting and training. The unrivaled expertise, industrial mindset and extensive global footprint that TRIGO has built up over the last 3 decades has made TRIGO the leading quality solutions provider using the latest innovative and reliable digital systems and standard processes, delivering results in the most demanding industries. TRIGO has recently started to expand its clientele by offering quality services to the medical, chemical and food industries. TRIGO Global Quality Solutions is committed to the core values of equal employment opportunity. We are committed to treating people fairly, and with respect and dignity. We offer employment opportunities based upon an individual's qualifications and performance, free from discrimination or harassment because of race, ancestry, place of origin, ethnic origin, color, citizenship, creed, sex, sexual orientation, age, marital status, family status, and disability. Job Posted by ApplicantPro