Quality control inspector jobs in Maltby, WA - 213 jobs

Full-time Description Join us in the exciting role of providing a Construction Quality Control Inspector to provide technical services for the Tahoma National Cemetery at Kent, WA. This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. The project provides 27,000 gravesites, supporting infrastructure, and a new honor guard building, satellite public restroom, minor repairs, and access roads, parking, and signage. Work Period: This position is a full-time position for two years, plus two optional 3-month extensions. Essential Functions: Inspections & quality control: Conduct daily site and building inspections; document defects, code violations, improper materials/techniques, and punch list items; observe contractor/subcontractor work for compliance and report findings to the SRE. Submittals, RFIs & approvals: Review contractor submittals, RFIs, samples, test/inspection reports, and installed work for technical compliance; recommend approval/disapproval and provide written feedback to the SRE. Schedule, progress & delays: Monitor schedules and daily activities; identify progress delays or slippage and recommend corrective actions to maintain the progress schedule. Contract changes & payments: Assist with change documentation (estimates, cost reviews, negotiations, change order packages) and review contractor payment requests, cost breakdowns, and quotations for SRE recommendation. Reporting & recordkeeping: Prepare and submit daily/weekly reports (work, manpower, safety), maintain complete job files, marked up plans/as builts, deficiency logs, photos, and records to support inspections, disputes, and government review. Safety & compliance: Perform weekly safety inspections, document environmental/EPA conditions, and report safety/compliance issues to the SRE. Materials, testing & commissioning: Maintain inventory of materials, supplies, and equipment; review material samples and cost loadings; coordinate special testing, commissioning, and utility inspections. Meetings & coordination: Attend/lead project and coordination meetings to resolve issues, manage phasing/traffic interruptions, and liaise with utilities, contractors, and VA representatives. Closeout & availability: Assist with final inspections, contract close-out activities, and be available for after-hours or weekend work as required; must communicate fluently in English. Benefits Package: Paid Time Off Paid Federal Observed Holidays Medical Insurance Dental and Vision Insurance Employee Paid Supplemental Insurance (Short Term Disability, Long Term Disability, Life, Accident, and Critical Illness) 401K - employer matching of up to 5% Equal Employment Opportunity (EEO): It has been and will continue to be a fundamental policy that GoldenWolf, LLC., is an Equal Opportunity Employer, including veterans and individuals with disabilities, committed to maintaining world-class facilities through technical excellence and innovation. About the Company: GoldenWolf is a Service-Disabled Veteran-Owned, Women-Owned Small Business that provides comprehensive facility management and support services to federal agencies. The company specializes in delivering a wide range of professional services, including facilities condition assessments, quality assurance, construction management, strategic planning, and technical support across civilian and defense sectors. We invite you to visit the GoldenWolf website at ****************** to learn more about the organization and explore other career opportunities. Requirements Education: Bachelor's degree in construction management, engineering, or Architecture from an accredited University. Qualifications: Minimum 2 years of experience working with a construction management team. Experience with observing and inspecting construction is required. Current OSHA 30 certification Certified Construction Manager (CCM) will receive greater consideration. Experience with Kahua, Primavera, and other construction management systems. Able to pass a security background check. Proficiency in Microsoft Office. Excellent verbal and written communication skills are necessary to effectively communicate with project stakeholders, contractors, and government personnel. The ability to write clear and concise reports is essential. Salary Description $90,000.00 - $120,000.00

Job Description Under general supervision and reporting Quality Management in Quality Operations, The Quality Inspector is responsible for performing visual inspection operations including In-process, Final Inspection, and FAI's as appropriate. The Quality Inspector must be familiar with hand tools and inspection under magnification. The Quality Inspector will also assist in verification of test data and all other applicable data concerning components, and associated documentation and other duties identified by cognizant management. SIGN ON BONUS OF $2000.00 Job Responsibilities: Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI's - AS9102 Experience with hand measurement tools Knowledge of CMM Inspection process Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Perform final inspection and receiving inspection (Which includes dimensional, visual inspection, surface finish, and assembly inspection) Reads, interprets, and utilizes Quality policies, procedures, blueprints, and other documentation Process warehouse materials Rely on instructions and pre-established guidelines/procedures to perform the functions of the job Support positive corrective actions and identification of root cause Other duties as assigned. Required Skills Experienced quality individual in dimensional inspection of aerospace machined components Experience in performing FAI's - AS9102 Experience with hand measurement tools MS Outlook, and EXCEL experience Experience with hand measurement gages, conduct conventional inspection to engineering requirements Knowledge and experience in GD&T (ASME Y14.5) Knowledge and experience with blueprint interpretation Valid drivers license and auto insurance required. Additional Desired Skills: Prior practical experience and implementation of Quality inspection tools and equipment. Experience in RCCA, and problem solving General Requirements Ability to handle complex situations and solve complex problems Ability to work effectively under pressure to meet deadlines Ability to press and analyze technical and business information Ability to work in a team environment with strong communication skills (verbal and written), ability to interact via telephone, email with co-workers Ability to remain seated for up to 5 hours at a time Fluent English - reading and writing is required Professionalism, integrity, and exceptional attention to detail Strong independent decision-making skills; excellent analytical skills and professional judgment Excellent interpersonal, written, and verbal communication skills Must be able to simultaneously manage several objectives Must be detail oriented, organized, and self-motivated Additional Qualifications (Preferred): 3+ years' experience as a quality inspector or technician. 3+ years' experience in an aerospace manufacturing facility 3+ years' experience in inspection duties, FAI's GD&T, and b/p interpretation Proficient with Microsoft Office products Effective communication skills Detail oriented Any combination of education and experience may be considered The General Vision Acuity Test shall be performed by an Oculist, Optometrist, or other professionally recognized person. The following requirements shall apply. • Near Vision - Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches) • Far vision - Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50 • Color Perception - 6 of 9 Orthorater plates US or International citizenship or permanent residence status required depending on work location. Valid Driver's License Valid Auto Insurance WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday - Friday from 8:00 a.m. - 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: 12 days paid vacation first year, increasing with service years 10 days paid sick time 11 paid holidays Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents Champ Plan Wellness and Health Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings Participation increases net take home pay $$$ in most instances Free wellness initiatives Free tele-health Free and discounted RX Auto enrollment (unless tax elections result in negative impact) Eligible on the 1st of the month following 30 days of continuous employment requires monthly 10-minute wellness activity participation 401k retirement savings with match Eligible on the first (1st) of the month following 90 days of continuous employment 100% match of 1st 3% contribution 50% match of next 2% contribution IMMEDIATE VESTING Company-provided cell phone, laptop, mobile wi-fi (for business use only) Regular Hourly rate for travel time Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Federal rate Mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 Federal rate mileage reimbursement (.70/mile 2025) when driving personal vehicles on company business Direct Pay Travel arrangements for flights, hotels and rental cars Travel Reimbursements direct deposited with each payroll Per diem reimbursements for meals and incidentals Overnight trips - Up to $75 Leaving home after 4 pm $40 $1500 EMPLOYEE REFERRAL BONUS Initial $750 paid upon hire of qualified referred employee (rehires excluded) Additional $750 paid upon referral's full completion of 90 days' employment Pay Range $25.00 -$40.00 per hour, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo's team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bDm4CbBgHH

Key Responsibilities: •Mechanical and Cosmetic inspection •Provide Quality control activities including new product introduction •Provide inspection services for incoming goods, returns and assembly •Document non-conformances and report major quality issues to leadership •First Article inspection Skills and Experience: •It is essential that the successful candidate have solid inspection experience gained in a manufacturing environment. •Technically competent, able to read and interpret engineering drawings. •Independence & Teamwork: Ability to work autonomously as well as collaborate effectively with a team. •Attention to Detail: Capable of maintaining precision in a fast-paced environment while meeting deadlines. •Strong Communication Skills: Good verbal and written communication and numerical skills are essential. •Familiarity with Quality disciplines including 8D reporting, 5 Whys and the completion of corrective action reports. (also essential)

(2nd Shift / Mon - Fri, Weekends during Peak Season / 6:00PM - 2:30AM / Diff Pay) The Quality Control Technician is responsible for reviewing and verifying product labeling to ensure compliance with internal and regulatory specifications. The Quality Control Technician is also responsible for maintaining and promoting GMPs, SSOPs, Safety, and Food Safety described in Kettle Cuisine as the best practices. Key Responsibilities: Review and verify the content of labels including product name, lot#, Exp. Dates, regulatory and allergen information. Ensure labels meet regulatory requirements (e.g., FDA, USDA) Approve or reject labels depending on inspection criteria. Maintain accurate and traceable records of all label inspections and verifications. Participate in deviation, investigations of CAPAs regarding labeling errors. Performs verification of food safety and quality checks established in the KC-Everett Plant's HACCP/FSMA and Preventive Control Programs. Understand, Troubleshot and Escalate - Vision System if necessary. Assists QA management in the collection of data for the purpose of improving products and systems as necessary as it relates to food safety and quality (Statistical Process Controls). Work in a safe manner and follow all Kettle Cuisine standards, along with Federal, State, and Local regulations for occupational safety. Assist QA and site in accomplishing the KC-Everett Plant and QA departmental goals and objectives. Provide support to help with the investigation and troubleshooting of any food safety, quality, or process control related issues. Return labels and packaging supplies back to proper storage locations after usage. Maintain strong working relations with all the departments. Other duties as assigned. Qualifications and Experience Two years of related experience with respect to Quality Control. Good communication skills including computer, writing, and verbal. Ability to understand and verbally express ideas and instructions effectively. Ability to work effectively and efficiently with others. Ability to prioritize, follow instructions and follow-through to achieve results. Required Attributes Self-starter able to conceptualize and drive initiatives forward Positive attitude and motivated by contributing to the overall success of the team Able to develop strong relationships with internal and external stakeholders Creative problem-solving skills Obsessive attention to detail, well organized and able to juggle many projects at once Comfortable moving at a fast pace and in ambiguous environments Passionate about food Willing to address difficult situations head on with patience and respect Level Of Responsibility Works with little supervision, but work is reviewed. Exercises discretion within areas of responsibility. Recommends actions and alternatives to supervisor and others. Position has little to no contact with customers. Position makes an indirect contribution to efforts that generate moderate levels of revenue. Decisions or actions may have a moderate impact on other departments and/or the external relationships of the organization. Errors are usually detected after the fact and may result in moderate interruption and delays in work output. WORKING CONDITIONS AND PHYSICAL EFFORT The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. Physical Demands/Efforts Work requires occasional physical exertion, including some lifting of objects weighing up to 25 pounds. Mental & Visual Demands Work performed by this position requires moderate concentration to effectively execute moderately complex tasks. Work occasionally requires some degree of visual effort for periods of time. Work Environment and Hazards Employee works in a manufacturing setting with some exposure to heat, cold, dust, or other factors of minor inconvenience. The position has some exposure to hazards that might cause minor injury. Must have availability and flexibility to work weekends or overtime as required.

* Shift differentials for Swing Shift and Weekend Shift Dogwood Industries - Who We Are Build your future with Dogwood Industries! Dogwood Industries is at the forefront of designing and manufacturing Pre-engineered Panelized Relocatable Metal Buildings, delivering industry leading solutions for mission-critical projects across industrial and DoD markets. Through a precise blend of manufacturing and construction, we build high-performance, rapidly deployable structures that keep critical missions moving forward. Our team provides leadership in the design process that transforms the way our clients work by delivering buildings as equipment solutions in harsh environments around the world. If you are motivated by innovation, thrive in a fast-paced setting, and want to be part of a team that is rapidly growing and revolutionizing the building industry, we'd love to speak with you! General Job Description Dogwood Industries LLC is seeking an experienced Quality Control Inspector (QCI) to join our team in Sedro-Woolley, WA. A successful candidate will be experienced in inspection procedures in an industrial setting and will demonstrate an understanding of quality control procedures and key elements of the inspection process and documentation thereof. Duties & Responsibilities The core responsibility of the QCI is to inspect and report non-conformances in accordance with drawings, inspection checklists or other specifications identified in the quality assurance plan. Daily, the QCI may be engaged in these activities: * Identify defective or non-conforming work * Issue reports and document resolution of non-conforming conditions * Execute and document specific test plans * Maintain and distribute accurate drawings and red line corrections * Maintain quality control records, documents, and logs * Perform incoming material inspections and vendor inspections when required * Perform first article, visual and dimensional checks at all stages of production * Other duties as assigned Requirements Requirements * Familiarity with AWS D1.1/AWS D1.2 weld inspection * Strong organizational and communication skills * Ability to manage change along with competing priorities * Fluency in English with excellent written and oral skills * Proficiency in standard Office computer applications * CWI certification is a plus Qualifications * 1+ years' experience in quality control * Minimum high school diploma or vocational degree * Experience in steel fabrication or general construction * Ability to read and understand engineering drawings and shop drawings Physical Requirements/Work Environment This position requires moderate physical activity in a manufacturing environment. While performing the duties of this job, the employee is regularly required to have full range of mobility in upper and lower body, able to reach overhead, able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling, squatting; use hands to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance for extended periods of time. Be able to lift 50 pounds of weight when required. The employee will be exposed to shop elements such as noise, dust, fumes, and odors. Compensation $28.00 - $38.00 hourly, depending on experience and qualifications. Benefits * Health Benefits, including medical, dental and vision * Company paid and supplemental life insurance * Short-term disability * Long-term disability * Additional voluntary benefits * Paid vacation, paid sick leave and paid holidays * 401(k) retirement plan, with employer match * Employee Referral Bonus Program Applicant Notes * Applicants must provide complete work history with employer references for last three to five years * All employees are subject to a pre-employment background check and pre-employment and random drug testing. Due to working in / being exposed to a safety sensitive environment, THC testing will occur as part of all drug screens. Location This position is based out of the Dogwood Factory Office at 500 Metcalf st, Sedro-Woolley, WA 98284. There may be travel to the Dogwood Everett, WA Factory as needed. Application Assistance If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Dogwood's HR department at ************** or ************************. Equal Employment Opportunity: All qualified applicants will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or any other status protected by law. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. Disclaimer: Although the Company has attempted to accurately and thoroughly describe this position, the Company reserves the right to change the same, including to change, add to or subtract from the duties outlined, within the sole discretion of the Company, at any time, with or without advance notice. In order to meet company deadlines, work in excess of 40 hours per week may be required from time to time. PM22

Job Description Our client, a successful second-generation independent family business, is experiencing significant growth and is seeking a highly skilled Lead Inspector to join their team. Specializing in fire protection systems, the company has expanded its workforce from 25 to 42 employees in the last five years and is now looking for an experienced professional to help them continue this momentum. As a Lead Inspector, you will be responsible for inspecting fire alarm and related systems across various structures, including multifamily residences, mixed-use commercial properties, assisted living facilities, and high-rise buildings. Your role will also involve mentoring an apprentice, playing a key part in developing the next generation of experts in this field. With most accounts located north of I-90, you will have the opportunity to call on multiple accounts per day if they're small or manage larger, multi-day inspections. Additionally, you will occasionally collaborate with other trades working on related systems. The company offers a guaranteed 80 hours per pay period, along with industry-leading compensation, which can be further enhanced if you are available for service calls. The company is known for its family-friendly, positive culture, emphasizing work/life balance, company functions, and opportunities for personal and professional growth. They offer comprehensive benefits, including medical, vision, and insurance coverage, PTO/holidays, paid time off during the holiday season (December 24-27), 401(k) with a 4% match, profit sharing, and support for training, study days, and certification testing. Responsibilities Conduct inspections of fire alarm and related systems in multifamily, commercial, assisted living, and high-rise structures. Mentor and guide an apprentice, ensuring the transfer of knowledge and skills. Manage multiple inspections daily for smaller accounts, or oversee large, multi-day inspections. Collaborate with other trades on projects involving related systems. Adhere to and enforce standard operating procedures (SOPs) to ensure thorough and accurate inspections. Maintain organization, punctuality, and professionalism on all job sites. Perform service calls as needed, with potential for additional compensation. Qualifications NICET II certification and O6 Electrical license required. Minimum of two years of experience in fire protection system inspections. Positive, family-friendly attitude with a strong fit for a collaborative and supportive culture. Ability to follow directions and accept feedback constructively. Highly organized, punctual, and able to lead by example. If you are a certified professional with a passion for fire protection systems and a desire to work in a supportive, family-oriented environment, we encourage you to apply. This role offers a unique opportunity to grow with a company that values expertise, teamwork, and a positive work/life balance.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

The Quality Inspector - Level 3 is an intermediate to advanced level inspector, with the ability to fully perform the role of Quality Inspector - Level 1 and 2 along with the ability to operate CMMs and to interpret their results. The Quality Inspector - Level 3 is capable of a wide range of inspection activities to include the inspection of machined parts, assemblies, raw material, heat treat, and outside processing. Shift: Monday-Thursday, 3:30pm-2:00am, with training shift Monday-Friday, 7:00am-3:30pm for approximately 2-3 weeks. There is an additional $2.50/hr shift differential for the night shift. Reporting Relationships: The Quality Inspector - Level 3 reports directly to the Inspection Supervisor. Primary Duties & Responsibilities: Inspect fastener installation, sealant, raw material, machine parts, bushings installations, and standards, assemblies, outside processing (NDT, finishes, finish coatings, thermal processing, etc.) Document FAI report Document non-conformances Perform First Part inspections Perform final inspections May occasionally perform special projects Other duties as assigned Required Skills/Experience: Ability to be certified with Hardness and Eddy Current, Sealant, Bushing and bearing installation, electrical bonding, and fastener installation. Proficient in basic computer skills First part inspection of machined parts utilizing DCC CMM's and or manual inspection methods (PCDMIS experience preferred) Good knowledge and understanding of Geometric Dimension and Tolerancing (GD&T) methods per ASME 14.5 Good knowledge of common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines (running PCDMIS software). Experienced in reading and correctly interpreting complex blueprints and engineering requirements Experience in applying shop math skills such as trigonometry, ability to calculate dimensions, set sine plate, etc. Identify and segregate non-conforming product Basic understanding of BQMS (Business Quality Management System) processes and procedures Understanding of machine shop and aerospace assembly terminology and nomenclature Fully experienced with all basic and advanced manual inspection tools Enter data using Syteline/ESI or other ERP systems as directed Ability to read and comprehend instructions and write simple correspondence Ability to read and write in English Ability to read and understand technical and engineering material and communicate effectively with coworkers Self-motivated with an ability to work alone or in a team environment Ability to maintain a positive focus and earnest approach in meeting responsibilities and goals 2+ years with recent aircraft machine shop experience Level of Education: High School Diploma or equivalent education

BPI Medical is growing at a remarkable rate and offers a rewarding career for a proven leader interested in making a difference every day. We embrace our entrepreneurial culture and have created a workplace where collaboration is essential, courage is rewarded, speed is expected, and agility is the norm to meet our customer's needs. Our motto is "Its gotta be right. its gotta be fast. no exceptions." We live by our values of Integrity, Quality, On-time Delivery, Collaboration, Growth Mindset and Compassion. We have a relaxed work atmosphere with an exceptional staff. We understand that continuous improvement is more than a business philosophy. It's a personal contribution to making our customers, our business, and our team members better every day. This position will engage in quality control activities designed to inspect, measure, and verify the effectiveness, and adherence to medical industry quality standards. The position is expected to work independently with the ability to exercise sound judgment, following established processes and procedures that govern quality control inspection. Conducting inspections and tests on incoming raw materials, components, and finished products to ensure they meet established quality standards and specifications. Performing visual inspections, measurements, and functional tests on medical devices to verify their compliance with applicable regulations and standards, such as ISO 13485 and FDA guidelines. Documenting inspection results and maintaining accurate records of quality control activities in accordance with regulatory requirements. Proficient in the use of mechanical inspection equipment; including micrometers, calipers, fixed gauges, optical comparator, CMM and other inspection measuring tools. Identifying and reporting non-conformities or deviations to appropriate personnel for investigation and corrective action. Participating in investigations of quality issues and working with cross-functional teams to determine root cause and implement corrective and preventive actions. Ensuring that inspection equipment and tools are calibrated and maintained in accordance with regulatory requirements and company procedures. Developing and implementing quality control procedures and work instructions to ensure consistent product quality. Collaborating with production staff and other stakeholders to address quality issues and drive continuous improvement. Participating in internal and external quality audits to ensure compliance with applicable regulations and standards. Communicating effectively with customers, suppliers, and other stakeholders on quality-related matters, including product quality, regulatory compliance, and quality system requirements. We are proud to be an Equal Opportunity Employer. BPI Medical, also known as Ben's Precision Instruments, was founded by a machinist-craftsman from Holland. Ben Overmars Sr. is both an immigrant and a worker performing fully with a disability. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. As a federal contractor, BPI Medical is required to participate in the federal government's E-Verify program. With E-Verify we are able to confirm the employment authorization of all newly hired employees and most existing employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.

A senior level position making final inspection of a wide variety of parts of complicated form with very close tolerances, sub-assemblies and completed units. Plan inspection procedures and methods; make a variety of gauging set-ups, devise methods of checking unusual parts, determine allowable variations from standard. Make disposition of rejects. Trains and assists less experienced inspectors. Assures products meet quality requirements by conducting receiving inspections, first article inspection; in-process inspection; evaluating finished product by performing the following duties. Essential Duties and Responsibilities include the following with other duties as assigned: Interprets engineering drawings, schematic diagrams, or specifications and confers with management or engineering staff to verify quality and reliability requirements. Selects products for inspection and testing at specified stages in production process; inspect and tests products for attributes and variables such as dimensions, performance, mechanical characteristics, and finish requirement. Documents finished product status by recording and summarizing raw materials, in-process, and finished-product inspection and physical test data, updates quality data base. Performs audits to ensure compliance to QA Manual requirements. Qualifications To perform this job successfully, an individual will be able to perform each essential duty satisfactorily. The individual must also possess a strong 3D mindset and have an eye for detail. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to use inspection tools such as calipers, scales, micrometer, height gauges, and flat surfaces. Experience in using CMM. Able to program and operate a variety of automated and manual digital inspection tools to validate products per drawing and model. Experience with FARO, Light Tables, CMM or similar is required Proficient user of computer and various software such as word processing, spread sheets, database, and graphics. Experience with CAD software (Catia, Solid works, Polywords, Measure Max, PCdmis, etc.) Thorough understanding of manufacturing processes Knowledge of standard drafting format and GD&T Experience with FAI's, use of Net Inspect and InspectionXpert preferred Coordinate with other departments/individuals to develop and refine current processes All external hiring is contingent upon the successful completion of a pre-employment drug screen and a criminal background check. Requirements Education and/or Experience This is a journey level position requiring an Associate's degree (A. A.) or equivalent from 2-year college or technical school; and a minimum of 5 years related experience; or equivalent combination of education and experience. Language Skill Ability to read and interpret documents such a stately rule, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers of employees of organization. Ability to speak and read Spanish and/or Japanese desired Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Customer Orientation Must demonstrate concern and take actions to meet requirements and high standards of quality of both internal and external customers. Must display courtesy and sensitivity. Manage difficult situations. Meet commitments. Respond promptly to customer needs. Solicit customer feedback to improve service. Supervisory Responsibilities This job has no supervisory responsibilities. Physical Demands While performing the duties of this job, the employee is frequently required to stand, walk, sit, talk and hear. Specific vision abilities required by this job include close vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Typical manufacturing environment. Jamco is passionate about providing a competitive and comprehensive benefits package and pleased to offer the following to eligible employees- Medical Coverage Dental and Vision Reimbursement 401(k) Retirement Savings Plan Benefit Conversion at Termination Bereavement Leave Educational Assistance Family and Medical Leave Paid Parental Leave (40 hours) *Qualifying event after June 15th, 2022 Flexible Benefit Plan (Flex Spending) Holidays Jury Duty/Witness Service Leave Life Insurance Long-Term Disability Short-Term Disability Pregnancy Leave Paid Time Off (PTO) Personal Leave Wedding Leave Wellness Program/Gym Reimbursement Pet Insurance

Job DescriptionSalary: Typical $30+ DOE Responsibilities: Ensure work area is safe, organized and clean Ensure all measurement equipment is operational and calibrated Verify incoming material and components; (Cert verification/visual condition/physical measurements) Performs FAI in accordance with AS9102C First part verification Performs in process inspection Final inspection prior to shipping to end customer Documents inspection results Collaborate with production team on quality related issues Competency requirements: Proficient in the use of measuring tools MS Office products Experience Ability to read, write, and converse in English Desired (can train as needed): 3-5 years experience in inspection role 2+ years related experience within sheet metal manufacturing environment or 5+ years related experience within a manufacturing environment, or equivalent combination of education and experience. Experience with and working knowledge of ISO, AS standards and specifications. Knowledge of basic statistical process control Experience with ERP systems is a plus PHYSICAL REQUIREMENTS Must be able to lift forty pounds without assistance on occasions Must be able to sit, stand and move around continuously Company Overview: Buyken is a precision metal fabrication company that has been around since 1939. We have a dedicated team of experienced people with the common goal of creating the highest quality manufacturing solutions to meet our customers growing and changing needs. We stand by a few mantras: Do what is right for our customers, employees and community. Benefits offered (one of the best in the industry): 100% of medical, dental, vision and life expenses are covered (how many companies can say that?) Buyken pays part of your yearly max deductible as well, which is unheard of 401k retirement benefits with company match on top of: Safe-harbor investment (we put money into your retirement even if you dont!) Tuition reimbursement program and extensive training programs/opportunities/certifications No-limit profit sharing. When the company does well all benefit with no cap. Yearly awards, BBQs and other activities to foster team morale Attitude: You can't train for attitude, drive and self-motivation. Most everything is trainable if you have a good base to work from. You must hold yourself to a high standard of quality and accountability like the rest of the team.

Job Description The Composites Quality Inspector is responsible for overseeing daily activities and workflows related to Composites Quality Assurance at Karman Space & Defense. his role ensures all QA efforts are conducted in compliance with Karman's Quality Management System and AS9100 requirements. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement* WHAT YOU WILL DO Ensures that Karman's composites manufacturing meets all quality requirements, drawings, and specifications Provides quality support and process oversight for composites layup technicians, including inspection of workmanship, material handling, kit cut and layup, documentation, inspection reports and work flow Ensures that materials are received, stored, handled, and tracked appropriately Tracks all composite manufacturing and inspection documentation, documents all non-conformances, initiates and supports corrective actions and investigations Generates AS9102 First Article Inspection Reports Coordinates with suppliers to correct quality related issues Performs and supports quality and regulatory audits of the Composites Shop Works with engineering staff to support process definition and new product development WHAT WE ARE LOOKING FOR Required Education: HS Diploma Hands-on experience in aerospace composite layup desirable Inspection experience desirable Must be a U.S. Citizen SKILLS Highly organized. Strong written and verbal communication skills. Ability to read and interpret technical drawings and specifications. Comfortable using computers to look-up and input information. EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law. Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Provides inspection support for all activities within the Systima Electrical Shop. Inspects to the requirements of Systima's engineering documentation, and IPC-610/620 where applicable. Ensures that traceability and documentation is commensurate with job requirements. Reviews planning submitted to Electrical Shop. Also supports Quality related workflows through the Electrical Shop as required by Systima's Quality Management System and AS9100. Reports to the Quality Manager. ABOUT US Karman Space & Defense provides concept-to-production solutions for mission-critical systems on spacecraft, launch vehicles, missiles, hypersonics, and integrated defense systems. We believe that solving the industry's most complex and mission-critical challenges requires relentless determination and a willingness to push the boundaries of possibility. Karman Space & Defense brings to bear unparalleled production capabilities, unmatched engineering expertise, and unflinching analysis to render the impossible, possible. COMPENSATION & BENEFITS Medical, Dental, Vision Company Paid Life Insurance 401(k) Retirement Savings Plan Paid Time Off (PTO) Paid Holidays Tuition Reimbursement* WHAT YOU WILL DO Inspects hardware from Systima Electrical Shop to ensure quality, drawing, and specification requirements are met Ensures that materials are stored, handled, and tracked appropriately per requirements Ensures manufacturing and inspection documentation is created and recorded appropriately Ensures that non-conformances are documented appropriately Generates AS9102 First Article Inspection Reports where required Supports quality and regulatory audits of the Electrical Shop Initiates and supports Corrective Actions and investigations where applicable Works with Design, Manufacturing, and Quality Engineers for new product and process definition WHAT WE ARE LOOKING FOR Required Education: HS Diploma Preferred Education: AA in related field Inspection experience in soldering and/or wire harness manufacturing Working experience in an AS9100 or ISO9001 compliant manufacturing environment Previous certification in IPC-610/620 or J-STD desirable Must be a U.S. Citizen Must hold or be able to obtain a DoD SECRET clearance EQUAL OPPORTUNITY EMPLOYER Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Karman is committed to equal employment opportunity. We will not discriminate against employees or applicants for employment on any legally recognized basis (“protected class”) including, but not limited to race; color; religion; genetic information; national origin; sex; pregnancy, childbirth, or related medical conditions; age; disability; citizenship status; uniform servicemember status; or any other protected class under federal, state, or local law.Our management is dedicated to ensuring the fulfillment of this policy with respect to hiring, placement, promotion, transfer, demotion, layoff, termination, recruitment advertising, pay, and other forms of compensation, training, and general treatment during employment.

Here's a quick overview of the role for your review: Job Title: Quality Calibration Technician Duration: 10+months(Possibilities for extension) Pay Range: $23.50/hr. On W2 Schedule: Mon to Fri 1st Shift 7: 00am to 3: 30pm Description: Job duties include but are not limited to: Monitors and maintains gage and process equipment calibration program. Calibrates M&TE to calibration standards. Manages gage R&R studies. Schedules outside calibration services, reviews and approves results to calibration standards. Works with Quality and Process Engineers to select appropriate measurement systems. Uses laser and touch probe CMMs along with standard measuring equipment to verify product as needed. Develop and improve calibration standards and procedures. Other task as needed and flexibility is key. Skills: Have a sincere desire to work and be able to work independently or with a team to complete tasks in a timely manner. Familiar with Windows OS. Able to read and interpret drawings including knowledge of GD&T. Experience using Catia, AutoCAD, IGES files in a measuring environment. Prior Metrology / Calibration experience under ISO17025 system. Prior inspection experience using portable CMMs and surface tools. Experience writing work instructions. 1-3 years of experience within an ISO9000 or equivalent quality / manufacturing environment. Education preferred: CCT, CQT, CQE or Six Sigma Black Belt.

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Fabrication B to join our Quality team in Puget Sound, Washington. Join our dedicated team as an Inspector Fabrication, where your keen eye for detail will be essential in ensuring the integrity of our fabricated parts and assemblies. In this critical role, you will perform thorough inspections of materials and components. Collaborating closely with Engineering, Quality, and Manufacturing, you will play a key role in evaluating and improving build processes while investigating and resolving defect-related issues. Your expertise in using precision measuring instruments will enable you to assess dimensions and workmanship accurately, while your ability to document nonconforming items will help maintain high standards of production. With a focus on continuous improvement, you will conduct audits and in-process inspections, ensuring compliance with all specifications. If you are passionate about maintaining excellence in fabrication and thrive in a fast-paced environment, we invite you to contribute to our mission of delivering top-quality products. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Perform inspections of fabricated detail parts, materials, and assemblies for workmanship, alignment, fit, and conformance to blueprints and specifications. Inspect fabricated and machined parts, subassemblies, and tooling to ensure compliance with engineering specifications and quality standards. Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction methods. Investigate and resolve defect-related problems, initiating and implementing project plans for quality improvement. Document any nonconforming materials, hardware, tools, or assemblies according to established specifications and procedures. Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance with specifications. Verify part numbers, serial numbers, and quantities against required paperwork upon receipt of parts and assemblies. Ensure all paperwork, including drawings and specifications, is complete, accurate, and up-to-date. Select and set up appropriate measuring instruments to check dimensions and workmanship of parts and assemblies. Inspect dimensions and workmanship, including visual weld inspections, according to drawings and specifications. Identify, document, and reject nonconforming parts/assemblies, noting discrepancies and required corrections. Perform re-inspections and initiate Re-inspection Requests (R/R) as needed, communicating with relevant inspection groups. Conduct in-process inspections, audits, and monitor heat treat processes, documenting required information. Verify certifications of tools, equipment, and personnel to ensure they are current and compliant. Handle and dispose of hazardous materials in accordance with safety regulations and contact supervisors for assistance when needed. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: 3+ years of experience as a Quality Inspector. 3+ years of experience reading and understanding engineering drawings, blueprints, and specifications. 3+ years of Experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications. 1+ years of experience in metal or composite fabrication in aerospace. Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. Preferred Qualifications: Experience in Foreign Object Debris (FOD) risk 1+ years of experience inspecting aircraft/aerospace parts, components, and/or assemblies for conformance with applicable drawings, specifications, quality standards, and manufacturing plans. Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Feb. 27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

*Shift differentials for Weekend Shift Dogwood Industries - Who We Are Build your future with Dogwood Industries! Dogwood Industries is at the forefront of designing and manufacturing Pre-engineered Panelized Relocatable Metal Buildings, delivering industry leading solutions for mission-critical projects across industrial and DoD markets. Through a precise blend of manufacturing and construction, we build high-performance, rapidly deployable structures that keep critical missions moving forward. Our team provides leadership in the design process that transforms the way our clients work by delivering buildings as equipment solutions in harsh environments around the world. If you are motivated by innovation, thrive in a fast-paced setting, and want to be part of a team that is rapidly growing and revolutionizing the building industry, we'd love to speak with you! General Job Description Dogwood Industries LLC is seeking an experienced Quality Control Inspector (QCI) to join our team in Sedro-Woolley, WA. A successful candidate will be experienced in inspection procedures in an industrial setting and will demonstrate an understanding of quality control procedures and key elements of the inspection process and documentation thereof. Duties & Responsibilities The core responsibility of the QCI is to inspect and report non-conformances in accordance with drawings, inspection checklists or other specifications identified in the quality assurance plan. Daily, the QCI may be engaged in these activities: Identify defective or non-conforming work Issue reports and document resolution of non-conforming conditions Execute and document specific test plans Maintain and distribute accurate drawings and red line corrections Maintain quality control records, documents, and logs Perform incoming material inspections and vendor inspections when required Perform first article, visual and dimensional checks at all stages of production Other duties as assigned Requirements Requirements Familiarity with AWS D1.1/AWS D1.2 weld inspection Strong organizational and communication skills Ability to manage change along with competing priorities Fluency in English with excellent written and oral skills Proficiency in standard Office computer applications CWI certification is a plus Qualifications 1+ years' experience in quality control Minimum high school diploma or vocational degree Experience in steel fabrication or general construction Ability to read and understand engineering drawings and shop drawings Physical Requirements/Work Environment This position requires moderate physical activity in a manufacturing environment. While performing the duties of this job, the employee is regularly required to have full range of mobility in upper and lower body, able to reach overhead, able to work in various positions, including, but not limited to, stooping, standing, bending over, sitting, kneeling, squatting; use hands to handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance for extended periods of time. Be able to lift 60 pounds of weight when required. The employee will be exposed to shop elements such as noise, dust, fumes, and odors. Compensation $28.00 - $38.00 hourly, depending on experience and qualifications. Shift differentials for Weekend Shift Benefits Health Benefits, including medical, dental and vision Company paid and supplemental life insurance Short-term disability Long-term disability Additional voluntary benefits Paid vacation, paid sick leave and paid holidays 401(k) retirement plan, with employer match Employee Referral Bonus Program Applicant Notes Applicants must provide complete work history with employer references for last three to five years All employees are subject to a pre-employment background check and pre-employment and random drug testing. Due to working in / being exposed to a safety sensitive environment, THC testing will occur as part of all drug screens. Application Assistance If you are an individual with a disability and need a reasonable accommodation in the application or hiring process, please contact Dogwood's HR department at ************** or ************************. Location This position is based out of the Dogwood Factory Office at 500 Metcalf st, Sedro-Woolley, WA 98284. There may be travel to the Dogwood Everett, WA Factory as needed. Equal Employment Opportunity: All qualified applicants will receive consideration for employment without regard to race/ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or any other status protected by law. For more information about our commitment to equal employment opportunity, please see this government poster: Know Your Rights: Workplace Discrimination is Illegal. Disclaimer: Although the Company has attempted to accurately and thoroughly describe this position, the Company reserves the right to change the same, including to change, add to or subtract from the duties outlined, within the sole discretion of the Company, at any time, with or without advance notice. In order to meet company deadlines, work in excess of 40 hours per week may be required from time to time. PM22 Salary Description $28.00 - $38.00 hourly, depending on experience

Job DescriptionDescription: Join us in the exciting role of providing a Construction Quality Control Inspector to provide technical services for the Tahoma National Cemetery at Kent, WA. This role provides comprehensive construction management support for the Tahoma National Cemetery major construction project, which develops 15 of the 36 undeveloped acres remaining at Tahoma National Cemetery, adding an additional 15 years of burial services for eligible veterans in the Puget Sound region of Washington state. The project provides 27,000 gravesites, supporting infrastructure, and a new honor guard building, satellite public restroom, minor repairs, and access roads, parking, and signage. Work Period: This position is a full-time position for two years, plus two optional 3-month extensions. Essential Functions: Inspections & quality control: Conduct daily site and building inspections; document defects, code violations, improper materials/techniques, and punch list items; observe contractor/subcontractor work for compliance and report findings to the SRE. Submittals, RFIs & approvals: Review contractor submittals, RFIs, samples, test/inspection reports, and installed work for technical compliance; recommend approval/disapproval and provide written feedback to the SRE. Schedule, progress & delays: Monitor schedules and daily activities; identify progress delays or slippage and recommend corrective actions to maintain the progress schedule. Contract changes & payments: Assist with change documentation (estimates, cost reviews, negotiations, change order packages) and review contractor payment requests, cost breakdowns, and quotations for SRE recommendation. Reporting & recordkeeping: Prepare and submit daily/weekly reports (work, manpower, safety), maintain complete job files, marked up plans/as builts, deficiency logs, photos, and records to support inspections, disputes, and government review. Safety & compliance: Perform weekly safety inspections, document environmental/EPA conditions, and report safety/compliance issues to the SRE. Materials, testing & commissioning: Maintain inventory of materials, supplies, and equipment; review material samples and cost loadings; coordinate special testing, commissioning, and utility inspections. Meetings & coordination: Attend/lead project and coordination meetings to resolve issues, manage phasing/traffic interruptions, and liaise with utilities, contractors, and VA representatives. Closeout & availability: Assist with final inspections, contract close-out activities, and be available for after-hours or weekend work as required; must communicate fluently in English. Benefits Package: Paid Time Off Paid Federal Observed Holidays Medical Insurance Dental and Vision Insurance Employee Paid Supplemental Insurance (Short Term Disability, Long Term Disability, Life, Accident, and Critical Illness) 401K - employer matching of up to 5% Equal Employment Opportunity (EEO): It has been and will continue to be a fundamental policy that GoldenWolf, LLC., is an Equal Opportunity Employer, including veterans and individuals with disabilities, committed to maintaining world-class facilities through technical excellence and innovation. About the Company: GoldenWolf is a Service-Disabled Veteran-Owned, Women-Owned Small Business that provides comprehensive facility management and support services to federal agencies. The company specializes in delivering a wide range of professional services, including facilities condition assessments, quality assurance, construction management, strategic planning, and technical support across civilian and defense sectors. We invite you to visit the GoldenWolf website at ****************** to learn more about the organization and explore other career opportunities. Requirements: Education: Bachelor's degree in construction management, engineering, or Architecture from an accredited University. Qualifications: Minimum 2 years of experience working with a construction management team. Experience with observing and inspecting construction is required. Current OSHA 30 certification Certified Construction Manager (CCM) will receive greater consideration. Experience with Kahua, Primavera, and other construction management systems. Able to pass a security background check. Proficiency in Microsoft Office. Excellent verbal and written communication skills are necessary to effectively communicate with project stakeholders, contractors, and government personnel. The ability to write clear and concise reports is essential.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.